From cadf364d14f629119ba02c69f17a697d21880079 Mon Sep 17 00:00:00 2001 From: Gavin Shan Date: Mon, 16 Feb 2015 14:45:47 +1100 Subject: [PATCH] powerpc/powernv: Drop PHB operation reset() The patch drops PHB EEH operation reset() and merges its logic to eeh_ops::reset(). Signed-off-by: Gavin Shan Signed-off-by: Benjamin Herrenschmidt --- arch/powerpc/platforms/powernv/eeh-ioda.c | 235 ------------------- arch/powerpc/platforms/powernv/eeh-powernv.c | 225 +++++++++++++++++- arch/powerpc/platforms/powernv/pci-ioda.c | 4 +- arch/powerpc/platforms/powernv/pci.h | 3 +- 4 files changed, 223 insertions(+), 244 deletions(-) diff --git a/arch/powerpc/platforms/powernv/eeh-ioda.c b/arch/powerpc/platforms/powernv/eeh-ioda.c index 94d94b4811ad..9fcfc45595ad 100644 --- a/arch/powerpc/platforms/powernv/eeh-ioda.c +++ b/arch/powerpc/platforms/powernv/eeh-ioda.c @@ -34,240 +34,5 @@ #include "powernv.h" #include "pci.h" -static s64 ioda_eeh_phb_poll(struct pnv_phb *phb) -{ - s64 rc = OPAL_HARDWARE; - - while (1) { - rc = opal_pci_poll(phb->opal_id); - if (rc <= 0) - break; - - if (system_state < SYSTEM_RUNNING) - udelay(1000 * rc); - else - msleep(rc); - } - - return rc; -} - -int ioda_eeh_phb_reset(struct pci_controller *hose, int option) -{ - struct pnv_phb *phb = hose->private_data; - s64 rc = OPAL_HARDWARE; - - pr_debug("%s: Reset PHB#%x, option=%d\n", - __func__, hose->global_number, option); - - /* Issue PHB complete reset request */ - if (option == EEH_RESET_FUNDAMENTAL || - option == EEH_RESET_HOT) - rc = opal_pci_reset(phb->opal_id, - OPAL_RESET_PHB_COMPLETE, - OPAL_ASSERT_RESET); - else if (option == EEH_RESET_DEACTIVATE) - rc = opal_pci_reset(phb->opal_id, - OPAL_RESET_PHB_COMPLETE, - OPAL_DEASSERT_RESET); - if (rc < 0) - goto out; - - /* - * Poll state of the PHB until the request is done - * successfully. The PHB reset is usually PHB complete - * reset followed by hot reset on root bus. So we also - * need the PCI bus settlement delay. - */ - rc = ioda_eeh_phb_poll(phb); - if (option == EEH_RESET_DEACTIVATE) { - if (system_state < SYSTEM_RUNNING) - udelay(1000 * EEH_PE_RST_SETTLE_TIME); - else - msleep(EEH_PE_RST_SETTLE_TIME); - } -out: - if (rc != OPAL_SUCCESS) - return -EIO; - - return 0; -} - -static int ioda_eeh_root_reset(struct pci_controller *hose, int option) -{ - struct pnv_phb *phb = hose->private_data; - s64 rc = OPAL_SUCCESS; - - pr_debug("%s: Reset PHB#%x, option=%d\n", - __func__, hose->global_number, option); - - /* - * During the reset deassert time, we needn't care - * the reset scope because the firmware does nothing - * for fundamental or hot reset during deassert phase. - */ - if (option == EEH_RESET_FUNDAMENTAL) - rc = opal_pci_reset(phb->opal_id, - OPAL_RESET_PCI_FUNDAMENTAL, - OPAL_ASSERT_RESET); - else if (option == EEH_RESET_HOT) - rc = opal_pci_reset(phb->opal_id, - OPAL_RESET_PCI_HOT, - OPAL_ASSERT_RESET); - else if (option == EEH_RESET_DEACTIVATE) - rc = opal_pci_reset(phb->opal_id, - OPAL_RESET_PCI_HOT, - OPAL_DEASSERT_RESET); - if (rc < 0) - goto out; - - /* Poll state of the PHB until the request is done */ - rc = ioda_eeh_phb_poll(phb); - if (option == EEH_RESET_DEACTIVATE) - msleep(EEH_PE_RST_SETTLE_TIME); -out: - if (rc != OPAL_SUCCESS) - return -EIO; - - return 0; -} - -static int ioda_eeh_bridge_reset(struct pci_dev *dev, int option) - -{ - struct device_node *dn = pci_device_to_OF_node(dev); - struct eeh_dev *edev = of_node_to_eeh_dev(dn); - int aer = edev ? edev->aer_cap : 0; - u32 ctrl; - - pr_debug("%s: Reset PCI bus %04x:%02x with option %d\n", - __func__, pci_domain_nr(dev->bus), - dev->bus->number, option); - - switch (option) { - case EEH_RESET_FUNDAMENTAL: - case EEH_RESET_HOT: - /* Don't report linkDown event */ - if (aer) { - eeh_ops->read_config(dn, aer + PCI_ERR_UNCOR_MASK, - 4, &ctrl); - ctrl |= PCI_ERR_UNC_SURPDN; - eeh_ops->write_config(dn, aer + PCI_ERR_UNCOR_MASK, - 4, ctrl); - } - - eeh_ops->read_config(dn, PCI_BRIDGE_CONTROL, 2, &ctrl); - ctrl |= PCI_BRIDGE_CTL_BUS_RESET; - eeh_ops->write_config(dn, PCI_BRIDGE_CONTROL, 2, ctrl); - msleep(EEH_PE_RST_HOLD_TIME); - - break; - case EEH_RESET_DEACTIVATE: - eeh_ops->read_config(dn, PCI_BRIDGE_CONTROL, 2, &ctrl); - ctrl &= ~PCI_BRIDGE_CTL_BUS_RESET; - eeh_ops->write_config(dn, PCI_BRIDGE_CONTROL, 2, ctrl); - msleep(EEH_PE_RST_SETTLE_TIME); - - /* Continue reporting linkDown event */ - if (aer) { - eeh_ops->read_config(dn, aer + PCI_ERR_UNCOR_MASK, - 4, &ctrl); - ctrl &= ~PCI_ERR_UNC_SURPDN; - eeh_ops->write_config(dn, aer + PCI_ERR_UNCOR_MASK, - 4, ctrl); - } - - break; - } - - return 0; -} - -void pnv_pci_reset_secondary_bus(struct pci_dev *dev) -{ - struct pci_controller *hose; - - if (pci_is_root_bus(dev->bus)) { - hose = pci_bus_to_host(dev->bus); - ioda_eeh_root_reset(hose, EEH_RESET_HOT); - ioda_eeh_root_reset(hose, EEH_RESET_DEACTIVATE); - } else { - ioda_eeh_bridge_reset(dev, EEH_RESET_HOT); - ioda_eeh_bridge_reset(dev, EEH_RESET_DEACTIVATE); - } -} - -/** - * ioda_eeh_reset - Reset the indicated PE - * @pe: EEH PE - * @option: reset option - * - * Do reset on the indicated PE. For PCI bus sensitive PE, - * we need to reset the parent p2p bridge. The PHB has to - * be reinitialized if the p2p bridge is root bridge. For - * PCI device sensitive PE, we will try to reset the device - * through FLR. For now, we don't have OPAL APIs to do HARD - * reset yet, so all reset would be SOFT (HOT) reset. - */ -static int ioda_eeh_reset(struct eeh_pe *pe, int option) -{ - struct pci_controller *hose = pe->phb; - struct pci_bus *bus; - int ret; - - /* - * For PHB reset, we always have complete reset. For those PEs whose - * primary bus derived from root complex (root bus) or root port - * (usually bus#1), we apply hot or fundamental reset on the root port. - * For other PEs, we always have hot reset on the PE primary bus. - * - * Here, we have different design to pHyp, which always clear the - * frozen state during PE reset. However, the good idea here from - * benh is to keep frozen state before we get PE reset done completely - * (until BAR restore). With the frozen state, HW drops illegal IO - * or MMIO access, which can incur recrusive frozen PE during PE - * reset. The side effect is that EEH core has to clear the frozen - * state explicitly after BAR restore. - */ - if (pe->type & EEH_PE_PHB) { - ret = ioda_eeh_phb_reset(hose, option); - } else { - struct pnv_phb *phb; - s64 rc; - - /* - * The frozen PE might be caused by PAPR error injection - * registers, which are expected to be cleared after hitting - * frozen PE as stated in the hardware spec. Unfortunately, - * that's not true on P7IOC. So we have to clear it manually - * to avoid recursive EEH errors during recovery. - */ - phb = hose->private_data; - if (phb->model == PNV_PHB_MODEL_P7IOC && - (option == EEH_RESET_HOT || - option == EEH_RESET_FUNDAMENTAL)) { - rc = opal_pci_reset(phb->opal_id, - OPAL_RESET_PHB_ERROR, - OPAL_ASSERT_RESET); - if (rc != OPAL_SUCCESS) { - pr_warn("%s: Failure %lld clearing " - "error injection registers\n", - __func__, rc); - return -EIO; - } - } - - bus = eeh_pe_bus_get(pe); - if (pci_is_root_bus(bus) || - pci_is_root_bus(bus->parent)) - ret = ioda_eeh_root_reset(hose, option); - else - ret = ioda_eeh_bridge_reset(bus->self, option); - } - - return ret; -} - struct pnv_eeh_ops ioda_eeh_ops = { - .reset = ioda_eeh_reset, }; diff --git a/arch/powerpc/platforms/powernv/eeh-powernv.c b/arch/powerpc/platforms/powernv/eeh-powernv.c index e51ac2dfde50..ede690630dfc 100644 --- a/arch/powerpc/platforms/powernv/eeh-powernv.c +++ b/arch/powerpc/platforms/powernv/eeh-powernv.c @@ -665,21 +665,236 @@ static int pnv_eeh_get_state(struct eeh_pe *pe, int *delay) return ret; } +static s64 pnv_eeh_phb_poll(struct pnv_phb *phb) +{ + s64 rc = OPAL_HARDWARE; + + while (1) { + rc = opal_pci_poll(phb->opal_id); + if (rc <= 0) + break; + + if (system_state < SYSTEM_RUNNING) + udelay(1000 * rc); + else + msleep(rc); + } + + return rc; +} + +int pnv_eeh_phb_reset(struct pci_controller *hose, int option) +{ + struct pnv_phb *phb = hose->private_data; + s64 rc = OPAL_HARDWARE; + + pr_debug("%s: Reset PHB#%x, option=%d\n", + __func__, hose->global_number, option); + + /* Issue PHB complete reset request */ + if (option == EEH_RESET_FUNDAMENTAL || + option == EEH_RESET_HOT) + rc = opal_pci_reset(phb->opal_id, + OPAL_RESET_PHB_COMPLETE, + OPAL_ASSERT_RESET); + else if (option == EEH_RESET_DEACTIVATE) + rc = opal_pci_reset(phb->opal_id, + OPAL_RESET_PHB_COMPLETE, + OPAL_DEASSERT_RESET); + if (rc < 0) + goto out; + + /* + * Poll state of the PHB until the request is done + * successfully. The PHB reset is usually PHB complete + * reset followed by hot reset on root bus. So we also + * need the PCI bus settlement delay. + */ + rc = pnv_eeh_phb_poll(phb); + if (option == EEH_RESET_DEACTIVATE) { + if (system_state < SYSTEM_RUNNING) + udelay(1000 * EEH_PE_RST_SETTLE_TIME); + else + msleep(EEH_PE_RST_SETTLE_TIME); + } +out: + if (rc != OPAL_SUCCESS) + return -EIO; + + return 0; +} + +static int pnv_eeh_root_reset(struct pci_controller *hose, int option) +{ + struct pnv_phb *phb = hose->private_data; + s64 rc = OPAL_HARDWARE; + + pr_debug("%s: Reset PHB#%x, option=%d\n", + __func__, hose->global_number, option); + + /* + * During the reset deassert time, we needn't care + * the reset scope because the firmware does nothing + * for fundamental or hot reset during deassert phase. + */ + if (option == EEH_RESET_FUNDAMENTAL) + rc = opal_pci_reset(phb->opal_id, + OPAL_RESET_PCI_FUNDAMENTAL, + OPAL_ASSERT_RESET); + else if (option == EEH_RESET_HOT) + rc = opal_pci_reset(phb->opal_id, + OPAL_RESET_PCI_HOT, + OPAL_ASSERT_RESET); + else if (option == EEH_RESET_DEACTIVATE) + rc = opal_pci_reset(phb->opal_id, + OPAL_RESET_PCI_HOT, + OPAL_DEASSERT_RESET); + if (rc < 0) + goto out; + + /* Poll state of the PHB until the request is done */ + rc = pnv_eeh_phb_poll(phb); + if (option == EEH_RESET_DEACTIVATE) + msleep(EEH_PE_RST_SETTLE_TIME); +out: + if (rc != OPAL_SUCCESS) + return -EIO; + + return 0; +} + +static int pnv_eeh_bridge_reset(struct pci_dev *dev, int option) +{ + struct device_node *dn = pci_device_to_OF_node(dev); + struct eeh_dev *edev = of_node_to_eeh_dev(dn); + int aer = edev ? edev->aer_cap : 0; + u32 ctrl; + + pr_debug("%s: Reset PCI bus %04x:%02x with option %d\n", + __func__, pci_domain_nr(dev->bus), + dev->bus->number, option); + + switch (option) { + case EEH_RESET_FUNDAMENTAL: + case EEH_RESET_HOT: + /* Don't report linkDown event */ + if (aer) { + eeh_ops->read_config(dn, aer + PCI_ERR_UNCOR_MASK, + 4, &ctrl); + ctrl |= PCI_ERR_UNC_SURPDN; + eeh_ops->write_config(dn, aer + PCI_ERR_UNCOR_MASK, + 4, ctrl); + } + + eeh_ops->read_config(dn, PCI_BRIDGE_CONTROL, 2, &ctrl); + ctrl |= PCI_BRIDGE_CTL_BUS_RESET; + eeh_ops->write_config(dn, PCI_BRIDGE_CONTROL, 2, ctrl); + + msleep(EEH_PE_RST_HOLD_TIME); + break; + case EEH_RESET_DEACTIVATE: + eeh_ops->read_config(dn, PCI_BRIDGE_CONTROL, 2, &ctrl); + ctrl &= ~PCI_BRIDGE_CTL_BUS_RESET; + eeh_ops->write_config(dn, PCI_BRIDGE_CONTROL, 2, ctrl); + + msleep(EEH_PE_RST_SETTLE_TIME); + + /* Continue reporting linkDown event */ + if (aer) { + eeh_ops->read_config(dn, aer + PCI_ERR_UNCOR_MASK, + 4, &ctrl); + ctrl &= ~PCI_ERR_UNC_SURPDN; + eeh_ops->write_config(dn, aer + PCI_ERR_UNCOR_MASK, + 4, ctrl); + } + + break; + } + + return 0; +} + +void pnv_pci_reset_secondary_bus(struct pci_dev *dev) +{ + struct pci_controller *hose; + + if (pci_is_root_bus(dev->bus)) { + hose = pci_bus_to_host(dev->bus); + pnv_eeh_root_reset(hose, EEH_RESET_HOT); + pnv_eeh_root_reset(hose, EEH_RESET_DEACTIVATE); + } else { + pnv_eeh_bridge_reset(dev, EEH_RESET_HOT); + pnv_eeh_bridge_reset(dev, EEH_RESET_DEACTIVATE); + } +} + /** * pnv_eeh_reset - Reset the specified PE * @pe: EEH PE * @option: reset option * - * Reset the specified PE + * Do reset on the indicated PE. For PCI bus sensitive PE, + * we need to reset the parent p2p bridge. The PHB has to + * be reinitialized if the p2p bridge is root bridge. For + * PCI device sensitive PE, we will try to reset the device + * through FLR. For now, we don't have OPAL APIs to do HARD + * reset yet, so all reset would be SOFT (HOT) reset. */ static int pnv_eeh_reset(struct eeh_pe *pe, int option) { struct pci_controller *hose = pe->phb; - struct pnv_phb *phb = hose->private_data; - int ret = -EEXIST; + struct pci_bus *bus; + int ret; + + /* + * For PHB reset, we always have complete reset. For those PEs whose + * primary bus derived from root complex (root bus) or root port + * (usually bus#1), we apply hot or fundamental reset on the root port. + * For other PEs, we always have hot reset on the PE primary bus. + * + * Here, we have different design to pHyp, which always clear the + * frozen state during PE reset. However, the good idea here from + * benh is to keep frozen state before we get PE reset done completely + * (until BAR restore). With the frozen state, HW drops illegal IO + * or MMIO access, which can incur recrusive frozen PE during PE + * reset. The side effect is that EEH core has to clear the frozen + * state explicitly after BAR restore. + */ + if (pe->type & EEH_PE_PHB) { + ret = pnv_eeh_phb_reset(hose, option); + } else { + struct pnv_phb *phb; + s64 rc; - if (phb->eeh_ops && phb->eeh_ops->reset) - ret = phb->eeh_ops->reset(pe, option); + /* + * The frozen PE might be caused by PAPR error injection + * registers, which are expected to be cleared after hitting + * frozen PE as stated in the hardware spec. Unfortunately, + * that's not true on P7IOC. So we have to clear it manually + * to avoid recursive EEH errors during recovery. + */ + phb = hose->private_data; + if (phb->model == PNV_PHB_MODEL_P7IOC && + (option == EEH_RESET_HOT || + option == EEH_RESET_FUNDAMENTAL)) { + rc = opal_pci_reset(phb->opal_id, + OPAL_RESET_PHB_ERROR, + OPAL_ASSERT_RESET); + if (rc != OPAL_SUCCESS) { + pr_warn("%s: Failure %lld clearing " + "error injection registers\n", + __func__, rc); + return -EIO; + } + } + + bus = eeh_pe_bus_get(pe); + if (pci_is_root_bus(bus) || + pci_is_root_bus(bus->parent)) + ret = pnv_eeh_root_reset(hose, option); + else + ret = pnv_eeh_bridge_reset(bus->self, option); + } return ret; } diff --git a/arch/powerpc/platforms/powernv/pci-ioda.c b/arch/powerpc/platforms/powernv/pci-ioda.c index 6c9ff2b95119..4e21596bed48 100644 --- a/arch/powerpc/platforms/powernv/pci-ioda.c +++ b/arch/powerpc/platforms/powernv/pci-ioda.c @@ -2121,8 +2121,8 @@ static void __init pnv_pci_init_ioda_phb(struct device_node *np, */ if (is_kdump_kernel()) { pr_info(" Issue PHB reset ...\n"); - ioda_eeh_phb_reset(hose, EEH_RESET_FUNDAMENTAL); - ioda_eeh_phb_reset(hose, EEH_RESET_DEACTIVATE); + pnv_eeh_phb_reset(hose, EEH_RESET_FUNDAMENTAL); + pnv_eeh_phb_reset(hose, EEH_RESET_DEACTIVATE); } /* Remove M64 resource if we can't configure it successfully */ diff --git a/arch/powerpc/platforms/powernv/pci.h b/arch/powerpc/platforms/powernv/pci.h index 5275d8928d94..39f2ca37b19e 100644 --- a/arch/powerpc/platforms/powernv/pci.h +++ b/arch/powerpc/platforms/powernv/pci.h @@ -78,7 +78,6 @@ struct pnv_ioda_pe { /* IOC dependent EEH operations */ #ifdef CONFIG_EEH struct pnv_eeh_ops { - int (*reset)(struct eeh_pe *pe, int option); }; #endif /* CONFIG_EEH */ @@ -223,6 +222,6 @@ extern void pnv_pci_init_ioda2_phb(struct device_node *np); extern void pnv_pci_ioda_tce_invalidate(struct iommu_table *tbl, __be64 *startp, __be64 *endp, bool rm); extern void pnv_pci_reset_secondary_bus(struct pci_dev *dev); -extern int ioda_eeh_phb_reset(struct pci_controller *hose, int option); +extern int pnv_eeh_phb_reset(struct pci_controller *hose, int option); #endif /* __POWERNV_PCI_H */ -- 2.30.2