From c90842b0d1b228df2986ec483ce692db2e7c3032 Mon Sep 17 00:00:00 2001 From: Rosen Penev Date: Mon, 25 Nov 2024 14:33:06 -0800 Subject: [PATCH] ath79: pqi-air-pen: adjust mac addresses The original ar71xx version of this device used 1002 as mac address for both ethernet and wireless. The ath79 version inexplicably changes this to 2, which seems to be done nowhere else in ath79, indicating it's bogus. Restore previous ar71xx assignment. 1002 is used as an ethernet interface with some other devices as well. Also remove the bogus caldata userspace extraction. The size is bogus and it's already handled in dts. Signed-off-by: Rosen Penev Link: https://github.com/openwrt/openwrt/pull/17083 Signed-off-by: John Crispin --- target/linux/ath79/dts/ar9330_pqi_air-pen.dts | 8 ++------ .../base-files/etc/hotplug.d/firmware/10-ath9k-eeprom | 3 --- 2 files changed, 2 insertions(+), 9 deletions(-) diff --git a/target/linux/ath79/dts/ar9330_pqi_air-pen.dts b/target/linux/ath79/dts/ar9330_pqi_air-pen.dts index 121dcbcb0e..4153de571a 100644 --- a/target/linux/ath79/dts/ar9330_pqi_air-pen.dts +++ b/target/linux/ath79/dts/ar9330_pqi_air-pen.dts @@ -95,10 +95,6 @@ #address-cells = <1>; #size-cells = <1>; - macaddr_art_2: macaddr@2 { - reg = <0x2 0x6>; - }; - cal_art_1000: calibration@1000 { reg = <0x1000 0x440>; }; @@ -153,6 +149,6 @@ &wmac { status = "okay"; - nvmem-cells = <&macaddr_art_2>, <&cal_art_1000>; - nvmem-cell-names = "mac-address", "calibration"; + nvmem-cells = <&cal_art_1000>; + nvmem-cell-names = "calibration"; }; diff --git a/target/linux/ath79/tiny/base-files/etc/hotplug.d/firmware/10-ath9k-eeprom b/target/linux/ath79/tiny/base-files/etc/hotplug.d/firmware/10-ath9k-eeprom index d424b9fe2c..796ebc3321 100644 --- a/target/linux/ath79/tiny/base-files/etc/hotplug.d/firmware/10-ath9k-eeprom +++ b/target/linux/ath79/tiny/base-files/etc/hotplug.d/firmware/10-ath9k-eeprom @@ -46,9 +46,6 @@ case "$FIRMWARE" in ubnt,picostation-m) caldata_extract "art" 0x1000 0x1000 ;; - pqi,air-pen) - caldata_extract "art" 0x1000 0x7d2 - ;; *) caldata_die "board $board is not supported yet" ;; -- 2.30.2