From c8904e9c04e9039f1414ef4de4809cab91ac1788 Mon Sep 17 00:00:00 2001 From: Martin Schiller Date: Thu, 3 Aug 2017 08:37:53 +0200 Subject: [PATCH] lantiq: board.d: use auto xfer_mode as default If xfer_mode is set to auto the vdsl_cpe_control daemon assumes that ATM should be used for ADSL and PTM for VDSL. Signed-off-by: Martin Schiller --- target/linux/lantiq/base-files/etc/board.d/02_network | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/target/linux/lantiq/base-files/etc/board.d/02_network b/target/linux/lantiq/base-files/etc/board.d/02_network index c245a8fa75c..2feeb9c208b 100755 --- a/target/linux/lantiq/base-files/etc/board.d/02_network +++ b/target/linux/lantiq/base-files/etc/board.d/02_network @@ -12,6 +12,8 @@ board_config_update vpi=1 vci=32 annex="a" +tone="av" +xfer_mode="" encaps="llc" payload="bridged" lan_mac="" @@ -198,7 +200,7 @@ ls /lib/modules/$(uname -r)/ltq_atm* 1> /dev/null 2>&1 && \ if lantiq_is_vdsl_system; then interface_wan="ptm0" - ucidef_add_vdsl_modem "$annex" "av" "ptm" + ucidef_add_vdsl_modem "$annex" "$tone" "$xfer_mode" else interface_wan="nas0" ucidef_add_adsl_modem "$annex" "/lib/firmware/adsl.bin" -- 2.30.2