From c88c395f4a6485f23f81e385c79945d68bcd5c5d Mon Sep 17 00:00:00 2001 From: Viresh Kumar Date: Mon, 15 Feb 2016 10:21:53 +0530 Subject: [PATCH] PM / OPP: Initialize u_volt_min/max to a valid value We kept u_volt_min/max initialized to 0, when only the target voltage is present in DT, instead of the target/min/max triplet. This didn't go well with the regulator framework, as on few calls the min voltage was set to target and max was set to 0 and so resulted in a kernel crash like below: kernel BUG at ../drivers/regulator/core.c:216! [] (regulator_check_voltage) from [] (regulator_set_voltage_unlocked+0x58/0x230) [] (regulator_set_voltage_unlocked) from [] (regulator_set_voltage+0x28/0x54) [] (regulator_set_voltage) from [] (_set_opp_voltage+0x30/0x98) [] (_set_opp_voltage) from [] (dev_pm_opp_set_rate+0xf0/0x28c) [] (dev_pm_opp_set_rate) from [] (__cpufreq_driver_target+0x184/0x2b4) [] (__cpufreq_driver_target) from [] (dbs_check_cpu+0x1b0/0x1f4) [] (dbs_check_cpu) from [] (cpufreq_governor_dbs+0x324/0x5c4) [] (cpufreq_governor_dbs) from [] (__cpufreq_governor+0xe4/0x1ec) [] (__cpufreq_governor) from [] (cpufreq_init_policy+0x64/0x8c) [] (cpufreq_init_policy) from [] (cpufreq_online+0x2fc/0x708) [] (cpufreq_online) from [] (subsys_interface_register+0x94/0xd8) [] (subsys_interface_register) from [] (cpufreq_register_driver+0x14c/0x19c) [] (cpufreq_register_driver) from [] (dt_cpufreq_probe+0x70/0xec) [] (dt_cpufreq_probe) from [] (platform_drv_probe+0x4c/0xb0) [] (platform_drv_probe) from [] (driver_probe_device+0x214/0x2c0) [] (driver_probe_device) from [] (__driver_attach+0x8c/0x90) [] (__driver_attach) from [] (bus_for_each_dev+0x68/0x9c) [] (bus_for_each_dev) from [] (bus_add_driver+0x1a0/0x218) [] (bus_add_driver) from [] (driver_register+0x78/0xf8) [] (driver_register) from [] (do_one_initcall+0x90/0x1d8) [] (do_one_initcall) from [] (kernel_init_freeable+0x15c/0x1fc) [] (kernel_init_freeable) from [] (kernel_init+0x8/0xf0) [] (kernel_init) from [] (ret_from_fork+0x14/0x3c) Code: e1550004 baffffeb e3a00000 e8bd8070 (e7f001f2) Fix that by initializing u_volt_min/max to the target voltage in such cases. Reported-and-tested-by: Krzysztof Kozlowski Fixes: 274659029c9d (PM / OPP: Add support to parse "operating-points-v2" bindings) Signed-off-by: Viresh Kumar Signed-off-by: Rafael J. Wysocki --- drivers/base/power/opp/core.c | 10 ++++++++-- 1 file changed, 8 insertions(+), 2 deletions(-) diff --git a/drivers/base/power/opp/core.c b/drivers/base/power/opp/core.c index d7cd4e265766..19fd7e7a3969 100644 --- a/drivers/base/power/opp/core.c +++ b/drivers/base/power/opp/core.c @@ -1157,8 +1157,14 @@ static int opp_parse_supplies(struct dev_pm_opp *opp, struct device *dev, } opp->u_volt = microvolt[0]; - opp->u_volt_min = microvolt[1]; - opp->u_volt_max = microvolt[2]; + + if (count == 1) { + opp->u_volt_min = opp->u_volt; + opp->u_volt_max = opp->u_volt; + } else { + opp->u_volt_min = microvolt[1]; + opp->u_volt_max = microvolt[2]; + } /* Search for "opp-microamp-" */ prop = NULL; -- 2.30.2