From c707cff6c94bfe3b5ec530f8496e91f763899172 Mon Sep 17 00:00:00 2001 From: Christian Marangi Date: Tue, 26 Sep 2023 14:10:42 +0200 Subject: [PATCH] ipq806x: add LEDs definition for non-standard qca8k LEDs Add LEDs definition for devices that use a non-standard qca8k LEDs configuration. This is to restore original setup of the LED and be on par with swconfig old configuration. Signed-off-by: Christian Marangi --- .../ipq806x/base-files/etc/board.d/01_leds | 27 ++++++ .../arm/boot/dts/qcom-ipq8062-wg2600hp3.dts | 96 +++++++++++++++++++ .../boot/dts/qcom-ipq8065-rt4230w-rev6.dts | 96 +++++++++++++++++++ 3 files changed, 219 insertions(+) diff --git a/target/linux/ipq806x/base-files/etc/board.d/01_leds b/target/linux/ipq806x/base-files/etc/board.d/01_leds index 950b7ad9688c..0b64bbb4206e 100644 --- a/target/linux/ipq806x/base-files/etc/board.d/01_leds +++ b/target/linux/ipq806x/base-files/etc/board.d/01_leds @@ -9,6 +9,18 @@ board_config_update board=$(board_name) case "$board" in +askey,rt4230w-rev6) + ucidef_set_led_netdev "wan-port-link" "WAN-PORT-LINK" "qca8k-0.0:00:green:wan" "wan" "link-10 link-100 link-1000" + ucidef_set_led_netdev "wan-port-activity" "WAN-PORT-ACTIVITY" "qca8k-0.0:00:amber:wan" "wan" "tx rx" + ucidef_set_led_netdev "lan1-port-link" "LAN1-PORT-LINK" "qca8k-0.0:01:green:lan" "lan1" "link-10 link-100 link-1000" + ucidef_set_led_netdev "lan1-port-activity" "LAN1-PORT-ACTIVITY" "qca8k-0.0:01:amber:lan" "lan1" "tx rx" + ucidef_set_led_netdev "lan2-port-link" "LAN2-PORT-LINK" "qca8k-0.0:02:green:lan" "lan2" "link-10 link-100 link-1000" + ucidef_set_led_netdev "lan2-port-activity" "LAN2-PORT-ACTIVITY" "qca8k-0.0:02:amber:lan" "lan2" "tx rx" + ucidef_set_led_netdev "lan3-port-link" "LAN3-PORT-LINK" "qca8k-0.0:03:green:lan" "lan3" "link-10 link-100 link-1000" + ucidef_set_led_netdev "lan3-port-activity" "LAN3-PORT-ACTIVITY" "qca8k-0.0:03:amber:lan" "lan3" "tx rx" + ucidef_set_led_netdev "lan4-port-link" "LAN4-PORT-LINK" "qca8k-0.0:04:green:lan" "lan4" "link-10 link-100 link-1000" + ucidef_set_led_netdev "lan4-port-activity" "LAN4-PORT-ACTIVITY" "qca8k-0.0:04:amber:lan" "lan4" "tx rx" + ;; buffalo,wxr-2533dhp) ucidef_set_led_wlan "wlan" "WLAN" "white:wireless" "phy0tpt" ucidef_set_led_netdev "wan" "WAN" "white:internet" "wan" @@ -32,6 +44,21 @@ nec,wg2600hp) ;; nec,wg2600hp3) ucidef_set_led_netdev "wan" "WAN" "green:active" "wan" + ucidef_set_led_netdev "wan-port-10" "WAN-PORT-10" "qca8k-0.0:00:green:wan-1" "wan" "tx rx link-10" + ucidef_set_led_netdev "wan-port-100" "WAN-PORT-100" "qca8k-0.0:00:green:wan-2" "wan" "tx rx link-100" + ucidef_set_led_netdev "wan-port-1000" "WAN-PORT-1000" "qca8k-0.0:00:green:wan-3" "wan" "tx rx link-1000" + ucidef_set_led_netdev "lan1-port-10" "LAN1-PORT-10" "qca8k-0.0:01:green:lan-1" "lan1" "tx rx link-10" + ucidef_set_led_netdev "lan1-port-100" "LAN1-PORT-100" "qca8k-0.0:01:green:lan-2" "lan1" "tx rx link-100" + ucidef_set_led_netdev "lan1-port-1000" "LAN1-PORT-1000" "qca8k-0.0:01:green:lan-3" "lan1" "tx rx link-1000" + ucidef_set_led_netdev "lan2-port-10" "LAN2-PORT-10" "qca8k-0.0:02:green:lan-1" "lan2" "tx rx link-10" + ucidef_set_led_netdev "lan2-port-100" "LAN2-PORT-100" "qca8k-0.0:02:green:lan-2" "lan2" "tx rx link-100" + ucidef_set_led_netdev "lan2-port-1000" "LAN2-PORT-1000" "qca8k-0.0:02:green:lan-3" "lan2" "tx rx link-1000" + ucidef_set_led_netdev "lan3-port-10" "LAN3-PORT-10" "qca8k-0.0:03:green:lan-1" "lan3" "tx rx link-10" + ucidef_set_led_netdev "lan3-port-100" "LAN3-PORT-100" "qca8k-0.0:03:green:lan-2" "lan3" "tx rx link-100" + ucidef_set_led_netdev "lan3-port-1000" "LAN3-PORT-1000" "qca8k-0.0:03:green:lan-3" "lan3" "tx rx link-1000" + ucidef_set_led_netdev "lan4-port-10" "LAN4-PORT-10" "qca8k-0.0:04:green:lan-1" "lan4" "tx rx link-10" + ucidef_set_led_netdev "lan4-port-100" "LAN4-PORT-100" "qca8k-0.0:04:green:lan-2" "lan4" "tx rx link-100" + ucidef_set_led_netdev "lan4-port-1000" "LAN4-PORT-1000" "qca8k-0.0:04:green:lan-3" "lan4" "tx rx link-1000" ;; netgear,d7800 |\ netgear,r7500 |\ diff --git a/target/linux/ipq806x/files/arch/arm/boot/dts/qcom-ipq8062-wg2600hp3.dts b/target/linux/ipq806x/files/arch/arm/boot/dts/qcom-ipq8062-wg2600hp3.dts index 5f78d91b9ea9..2c181bd88308 100644 --- a/target/linux/ipq806x/files/arch/arm/boot/dts/qcom-ipq8062-wg2600hp3.dts +++ b/target/linux/ipq806x/files/arch/arm/boot/dts/qcom-ipq8062-wg2600hp3.dts @@ -2,6 +2,7 @@ #include "qcom-ipq8062-smb208.dtsi" #include +#include / { model = "NEC Platforms Aterm WG2600HP3"; @@ -441,6 +442,25 @@ label = "wan"; phy-mode = "internal"; phy-handle = <&phy_port1>; + + leds { + #address-cells = <1>; + #size-cells = <0>; + + led@0 { + reg = <0>; + color = ; + function = LED_FUNCTION_WAN; + default-state = "keep"; + }; + + led@1 { + reg = <1>; + color = ; + function = LED_FUNCTION_WAN; + default-state = "keep"; + }; + }; }; port@2 { @@ -448,6 +468,25 @@ label = "lan1"; phy-mode = "internal"; phy-handle = <&phy_port2>; + + leds { + #address-cells = <1>; + #size-cells = <0>; + + led@0 { + reg = <0>; + color = ; + function = LED_FUNCTION_LAN; + default-state = "keep"; + }; + + led@1 { + reg = <1>; + color = ; + function = LED_FUNCTION_LAN; + default-state = "keep"; + }; + }; }; port@3 { @@ -455,6 +494,25 @@ label = "lan2"; phy-mode = "internal"; phy-handle = <&phy_port3>; + + leds { + #address-cells = <1>; + #size-cells = <0>; + + led@0 { + reg = <0>; + color = ; + function = LED_FUNCTION_LAN; + default-state = "keep"; + }; + + led@1 { + reg = <1>; + color = ; + function = LED_FUNCTION_LAN; + default-state = "keep"; + }; + }; }; port@4 { @@ -462,6 +520,25 @@ label = "lan3"; phy-mode = "internal"; phy-handle = <&phy_port4>; + + leds { + #address-cells = <1>; + #size-cells = <0>; + + led@0 { + reg = <0>; + color = ; + function = LED_FUNCTION_LAN; + default-state = "keep"; + }; + + led@1 { + reg = <1>; + color = ; + function = LED_FUNCTION_LAN; + default-state = "keep"; + }; + }; }; port@5 { @@ -469,6 +546,25 @@ label = "lan4"; phy-mode = "internal"; phy-handle = <&phy_port5>; + + leds { + #address-cells = <1>; + #size-cells = <0>; + + led@0 { + reg = <0>; + color = ; + function = LED_FUNCTION_LAN; + default-state = "keep"; + }; + + led@1 { + reg = <1>; + color = ; + function = LED_FUNCTION_LAN; + default-state = "keep"; + }; + }; }; port@6 { diff --git a/target/linux/ipq806x/files/arch/arm/boot/dts/qcom-ipq8065-rt4230w-rev6.dts b/target/linux/ipq806x/files/arch/arm/boot/dts/qcom-ipq8065-rt4230w-rev6.dts index 6bf2cfe128ac..5453f9fcb3cb 100644 --- a/target/linux/ipq806x/files/arch/arm/boot/dts/qcom-ipq8065-rt4230w-rev6.dts +++ b/target/linux/ipq806x/files/arch/arm/boot/dts/qcom-ipq8065-rt4230w-rev6.dts @@ -2,6 +2,7 @@ #include "qcom-ipq8065-smb208.dtsi" #include +#include / { model = "Askey RT4230W REV6"; @@ -326,6 +327,25 @@ label = "wan"; phy-mode = "internal"; phy-handle = <&phy_port1>; + + leds { + #address-cells = <1>; + #size-cells = <0>; + + led@0 { + reg = <0>; + color = ; + function = LED_FUNCTION_WAN; + default-state = "keep"; + }; + + led@1 { + reg = <1>; + color = ; + function = LED_FUNCTION_WAN; + default-state = "keep"; + }; + }; }; port@2 { @@ -333,6 +353,25 @@ label = "lan1"; phy-mode = "internal"; phy-handle = <&phy_port2>; + + leds { + #address-cells = <1>; + #size-cells = <0>; + + led@0 { + reg = <0>; + color = ; + function = LED_FUNCTION_LAN; + default-state = "keep"; + }; + + led@1 { + reg = <1>; + color = ; + function = LED_FUNCTION_LAN; + default-state = "keep"; + }; + }; }; port@3 { @@ -340,6 +379,25 @@ label = "lan2"; phy-mode = "internal"; phy-handle = <&phy_port3>; + + leds { + #address-cells = <1>; + #size-cells = <0>; + + led@0 { + reg = <0>; + color = ; + function = LED_FUNCTION_LAN; + default-state = "keep"; + }; + + led@1 { + reg = <1>; + color = ; + function = LED_FUNCTION_LAN; + default-state = "keep"; + }; + }; }; port@4 { @@ -347,6 +405,25 @@ label = "lan3"; phy-mode = "internal"; phy-handle = <&phy_port4>; + + leds { + #address-cells = <1>; + #size-cells = <0>; + + led@0 { + reg = <0>; + color = ; + function = LED_FUNCTION_LAN; + default-state = "keep"; + }; + + led@1 { + reg = <1>; + color = ; + function = LED_FUNCTION_LAN; + default-state = "keep"; + }; + }; }; port@5 { @@ -354,6 +431,25 @@ label = "lan4"; phy-mode = "internal"; phy-handle = <&phy_port5>; + + leds { + #address-cells = <1>; + #size-cells = <0>; + + led@0 { + reg = <0>; + color = ; + function = LED_FUNCTION_LAN; + default-state = "keep"; + }; + + led@1 { + reg = <1>; + color = ; + function = LED_FUNCTION_LAN; + default-state = "keep"; + }; + }; }; port@6 { -- 2.30.2