From c4b44d76998b9abdca09093d044a39e4c773052f Mon Sep 17 00:00:00 2001 From: Tim Harvey Date: Fri, 8 May 2015 18:28:39 -0700 Subject: [PATCH] imx: ventana: add gpio setup to SPL If the SPL is to be used for Falcon mode then we need to make sure it configures basic GPIO (iomux, padconf, and default output levels). Signed-off-by: Tim Harvey --- board/gateworks/gw_ventana/gw_ventana_spl.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/board/gateworks/gw_ventana/gw_ventana_spl.c b/board/gateworks/gw_ventana/gw_ventana_spl.c index 82078a0c5e..cde04cfacc 100644 --- a/board/gateworks/gw_ventana/gw_ventana_spl.c +++ b/board/gateworks/gw_ventana/gw_ventana_spl.c @@ -510,6 +510,9 @@ void board_init_f(ulong dummy) /* read/validate EEPROM info to determine board model and SDRAM cfg */ board_model = read_eeprom(CONFIG_I2C_GSC, &ventana_info); + /* configure model-specific gpio */ + setup_iomux_gpio(board_model, &ventana_info); + /* provide some some default: 32bit 128MB */ if (GW_UNKNOWN == board_model) { ventana_info.sdram_width = 2; -- 2.30.2