From c2c741ccce0480a5a71bfa6b392b3c71e867d1dc Mon Sep 17 00:00:00 2001 From: Christian Marangi Date: Mon, 15 Jan 2024 19:54:23 +0100 Subject: [PATCH] generic: 6.1: initial backport of at803x PHY driver cleanup Initial backport of at803x PHY driver cleanup. This is in preparation for split and addition of new PHY Family based on at803x needed for ipq807x and other IPQ Series SoC. Other affected patch are automatically refreshed with make target/linux/refresh Signed-off-by: Christian Marangi --- ...edicated-C45-API-to-MDIO-bus-drivers.patch | 326 ++++++++++++++++++ ...-Introduce-PSGMII-PHY-interface-mode.patch | 105 ++++++ ...eplace-of_gpio.h-with-what-indeed-is.patch | 32 ++ ...upport-qca8081-genphy_c45_pma_read_a.patch | 70 ++++ ...3x-merge-qca8081-slave-seed-function.patch | 73 ++++ ...nable-qca8081-slave-seed-conditional.patch | 76 ++++ ...-at803x-support-qca8081-1G-chip-type.patch | 48 +++ ...emove-qca8081-1G-fast-retrain-and-sl.patch | 98 ++++++ ...dd-qca8081-fifo-reset-on-the-link-ch.patch | 55 +++ ...ix-passing-the-wrong-reference-for-c.patch | 45 +++ ...ove-disable-WOL-to-specific-at8031-p.patch | 69 ++++ ...aname-hw_stats-functions-to-qca83xx-.patch | 129 +++++++ ...ove-qca83xx-specific-check-in-dedica.patch | 155 +++++++++ ...ove-specific-DT-option-for-at8031-to.patch | 94 +++++ ...ove-specific-at8031-probe-mode-check.patch | 78 +++++ ...ove-specific-at8031-config_init-to-d.patch | 86 +++++ ...ove-specific-at8031-WOL-bits-to-dedi.patch | 92 +++++ ...ove-specific-at8031-config_intr-to-d.patch | 78 +++++ ...ake-at8031-related-DT-functions-name.patch | 78 +++++ ...ove-at8031-functions-in-dedicated-se.patch | 297 ++++++++++++++++ ...ove-at8035-specific-DT-parse-to-dedi.patch | 114 ++++++ ...rop-specific-PHY-ID-check-from-cable.patch | 219 ++++++++++++ ...ove-specific-qca808x-config_aneg-to-.patch | 116 +++++++ ...ake-read-specific-status-function-mo.patch | 97 ++++++ ...at803x-remove-extra-space-after-cast.patch | 27 ++ ...x-replace-msleep-1-with-usleep_range.patch | 38 ++ ...etter-align-function-varibles-to-ope.patch | 152 ++++++++ ...generalize-cdt-fault-length-function.patch | 62 ++++ ...efactor-qca808x-cable-test-get-statu.patch | 118 +++++++ ...dd-support-for-cdt-cross-short-test-.patch | 182 ++++++++++ ...at803x-make-read_status-more-generic.patch | 62 ++++ ...k-add-pcs_enable-pcs_disable-methods.patch | 14 +- ...5-net-phy-Add-a-binding-for-PHY-LEDs.patch | 6 +- ...ce-Call-into-the-PHY-driver-to-set-L.patch | 4 +- ...ce-Call-into-the-PHY-driver-to-set-L.patch | 2 +- ...ce-Call-into-the-PHY-driver-to-set-L.patch | 2 +- ...detach-callback-to-struct-phy_driver.patch | 2 +- 37 files changed, 3286 insertions(+), 15 deletions(-) create mode 100644 target/linux/generic/backport-6.1/703-v6.3-net-mdio-Add-dedicated-C45-API-to-MDIO-bus-drivers.patch create mode 100644 target/linux/generic/backport-6.1/704-v6.6-net-phy-Introduce-PSGMII-PHY-interface-mode.patch create mode 100644 target/linux/generic/backport-6.1/705-v6.4-net-phy-at803x-Replace-of_gpio.h-with-what-indeed-is.patch create mode 100644 target/linux/generic/backport-6.1/706-v6.6-01-net-phy-at803x-support-qca8081-genphy_c45_pma_read_a.patch create mode 100644 target/linux/generic/backport-6.1/706-v6.6-02-net-phy-at803x-merge-qca8081-slave-seed-function.patch create mode 100644 target/linux/generic/backport-6.1/706-v6.6-03-net-phy-at803x-enable-qca8081-slave-seed-conditional.patch create mode 100644 target/linux/generic/backport-6.1/706-v6.6-04-net-phy-at803x-support-qca8081-1G-chip-type.patch create mode 100644 target/linux/generic/backport-6.1/706-v6.6-05-net-phy-at803x-remove-qca8081-1G-fast-retrain-and-sl.patch create mode 100644 target/linux/generic/backport-6.1/706-v6.6-06-net-phy-at803x-add-qca8081-fifo-reset-on-the-link-ch.patch create mode 100644 target/linux/generic/backport-6.1/707-v6.8-01-net-phy-at803x-fix-passing-the-wrong-reference-for-c.patch create mode 100644 target/linux/generic/backport-6.1/707-v6.8-02-net-phy-at803x-move-disable-WOL-to-specific-at8031-p.patch create mode 100644 target/linux/generic/backport-6.1/707-v6.8-03-net-phy-at803x-raname-hw_stats-functions-to-qca83xx-.patch create mode 100644 target/linux/generic/backport-6.1/707-v6.8-04-net-phy-at803x-move-qca83xx-specific-check-in-dedica.patch create mode 100644 target/linux/generic/backport-6.1/707-v6.8-05-net-phy-at803x-move-specific-DT-option-for-at8031-to.patch create mode 100644 target/linux/generic/backport-6.1/707-v6.8-06-net-phy-at803x-move-specific-at8031-probe-mode-check.patch create mode 100644 target/linux/generic/backport-6.1/707-v6.8-07-net-phy-at803x-move-specific-at8031-config_init-to-d.patch create mode 100644 target/linux/generic/backport-6.1/707-v6.8-08-net-phy-at803x-move-specific-at8031-WOL-bits-to-dedi.patch create mode 100644 target/linux/generic/backport-6.1/707-v6.8-09-net-phy-at803x-move-specific-at8031-config_intr-to-d.patch create mode 100644 target/linux/generic/backport-6.1/707-v6.8-10-net-phy-at803x-make-at8031-related-DT-functions-name.patch create mode 100644 target/linux/generic/backport-6.1/707-v6.8-11-net-phy-at803x-move-at8031-functions-in-dedicated-se.patch create mode 100644 target/linux/generic/backport-6.1/707-v6.8-12-net-phy-at803x-move-at8035-specific-DT-parse-to-dedi.patch create mode 100644 target/linux/generic/backport-6.1/707-v6.8-13-net-phy-at803x-drop-specific-PHY-ID-check-from-cable.patch create mode 100644 target/linux/generic/backport-6.1/708-v6.8-01-net-phy-at803x-move-specific-qca808x-config_aneg-to-.patch create mode 100644 target/linux/generic/backport-6.1/708-v6.8-02-net-phy-at803x-make-read-specific-status-function-mo.patch create mode 100644 target/linux/generic/backport-6.1/709-v6.8-01-net-phy-at803x-remove-extra-space-after-cast.patch create mode 100644 target/linux/generic/backport-6.1/709-v6.8-02-net-phy-at803x-replace-msleep-1-with-usleep_range.patch create mode 100644 target/linux/generic/backport-6.1/710-v6.8-net-phy-at803x-better-align-function-varibles-to-ope.patch create mode 100644 target/linux/generic/backport-6.1/711-v6.8-01-net-phy-at803x-generalize-cdt-fault-length-function.patch create mode 100644 target/linux/generic/backport-6.1/711-v6.8-02-net-phy-at803x-refactor-qca808x-cable-test-get-statu.patch create mode 100644 target/linux/generic/backport-6.1/711-v6.8-03-net-phy-at803x-add-support-for-cdt-cross-short-test-.patch create mode 100644 target/linux/generic/backport-6.1/711-v6.8-04-net-phy-at803x-make-read_status-more-generic.patch diff --git a/target/linux/generic/backport-6.1/703-v6.3-net-mdio-Add-dedicated-C45-API-to-MDIO-bus-drivers.patch b/target/linux/generic/backport-6.1/703-v6.3-net-mdio-Add-dedicated-C45-API-to-MDIO-bus-drivers.patch new file mode 100644 index 0000000000..ff186742ba --- /dev/null +++ b/target/linux/generic/backport-6.1/703-v6.3-net-mdio-Add-dedicated-C45-API-to-MDIO-bus-drivers.patch @@ -0,0 +1,326 @@ +From 4e4aafcddbbfcdd6eed5780e190fcbfac8b4685a Mon Sep 17 00:00:00 2001 +From: Andrew Lunn +Date: Mon, 9 Jan 2023 16:30:41 +0100 +Subject: [PATCH] net: mdio: Add dedicated C45 API to MDIO bus drivers + +Currently C22 and C45 transactions are mixed over a combined API calls +which make use of a special bit in the reg address to indicate if a +C45 transaction should be performed. This makes it impossible to know +if the bus driver actually supports C45. Additionally, many C22 only +drivers don't return -EOPNOTSUPP when asked to perform a C45 +transaction, they mistaking perform a C22 transaction. + +This is the first step to cleanly separate C22 from C45. To maintain +backwards compatibility until all drivers which are capable of +performing C45 are converted to this new API, the helper functions +will fall back to the older API if the new API is not +supported. Eventually this fallback will be removed. + +Signed-off-by: Andrew Lunn +Signed-off-by: Michael Walle +Signed-off-by: Jakub Kicinski +--- + drivers/net/phy/mdio_bus.c | 189 +++++++++++++++++++++++++++++++++++++ + include/linux/mdio.h | 39 ++++---- + include/linux/phy.h | 5 + + 3 files changed, 214 insertions(+), 19 deletions(-) + +--- a/drivers/net/phy/mdio_bus.c ++++ b/drivers/net/phy/mdio_bus.c +@@ -832,6 +832,100 @@ int __mdiobus_modify_changed(struct mii_ + EXPORT_SYMBOL_GPL(__mdiobus_modify_changed); + + /** ++ * __mdiobus_c45_read - Unlocked version of the mdiobus_c45_read function ++ * @bus: the mii_bus struct ++ * @addr: the phy address ++ * @devad: device address to read ++ * @regnum: register number to read ++ * ++ * Read a MDIO bus register. Caller must hold the mdio bus lock. ++ * ++ * NOTE: MUST NOT be called from interrupt context. ++ */ ++int __mdiobus_c45_read(struct mii_bus *bus, int addr, int devad, u32 regnum) ++{ ++ int retval; ++ ++ lockdep_assert_held_once(&bus->mdio_lock); ++ ++ if (bus->read_c45) ++ retval = bus->read_c45(bus, addr, devad, regnum); ++ else ++ retval = bus->read(bus, addr, mdiobus_c45_addr(devad, regnum)); ++ ++ trace_mdio_access(bus, 1, addr, regnum, retval, retval); ++ mdiobus_stats_acct(&bus->stats[addr], true, retval); ++ ++ return retval; ++} ++EXPORT_SYMBOL(__mdiobus_c45_read); ++ ++/** ++ * __mdiobus_c45_write - Unlocked version of the mdiobus_write function ++ * @bus: the mii_bus struct ++ * @addr: the phy address ++ * @devad: device address to read ++ * @regnum: register number to write ++ * @val: value to write to @regnum ++ * ++ * Write a MDIO bus register. Caller must hold the mdio bus lock. ++ * ++ * NOTE: MUST NOT be called from interrupt context. ++ */ ++int __mdiobus_c45_write(struct mii_bus *bus, int addr, int devad, u32 regnum, ++ u16 val) ++{ ++ int err; ++ ++ lockdep_assert_held_once(&bus->mdio_lock); ++ ++ if (bus->write_c45) ++ err = bus->write_c45(bus, addr, devad, regnum, val); ++ else ++ err = bus->write(bus, addr, mdiobus_c45_addr(devad, regnum), ++ val); ++ ++ trace_mdio_access(bus, 0, addr, regnum, val, err); ++ mdiobus_stats_acct(&bus->stats[addr], false, err); ++ ++ return err; ++} ++EXPORT_SYMBOL(__mdiobus_c45_write); ++ ++/** ++ * __mdiobus_c45_modify_changed - Unlocked version of the mdiobus_modify function ++ * @bus: the mii_bus struct ++ * @addr: the phy address ++ * @devad: device address to read ++ * @regnum: register number to modify ++ * @mask: bit mask of bits to clear ++ * @set: bit mask of bits to set ++ * ++ * Read, modify, and if any change, write the register value back to the ++ * device. Any error returns a negative number. ++ * ++ * NOTE: MUST NOT be called from interrupt context. ++ */ ++static int __mdiobus_c45_modify_changed(struct mii_bus *bus, int addr, ++ int devad, u32 regnum, u16 mask, ++ u16 set) ++{ ++ int new, ret; ++ ++ ret = __mdiobus_c45_read(bus, addr, devad, regnum); ++ if (ret < 0) ++ return ret; ++ ++ new = (ret & ~mask) | set; ++ if (new == ret) ++ return 0; ++ ++ ret = __mdiobus_c45_write(bus, addr, devad, regnum, new); ++ ++ return ret < 0 ? ret : 1; ++} ++ ++/** + * mdiobus_read_nested - Nested version of the mdiobus_read function + * @bus: the mii_bus struct + * @addr: the phy address +@@ -879,6 +973,29 @@ int mdiobus_read(struct mii_bus *bus, in + EXPORT_SYMBOL(mdiobus_read); + + /** ++ * mdiobus_c45_read - Convenience function for reading a given MII mgmt register ++ * @bus: the mii_bus struct ++ * @addr: the phy address ++ * @devad: device address to read ++ * @regnum: register number to read ++ * ++ * NOTE: MUST NOT be called from interrupt context, ++ * because the bus read/write functions may wait for an interrupt ++ * to conclude the operation. ++ */ ++int mdiobus_c45_read(struct mii_bus *bus, int addr, int devad, u32 regnum) ++{ ++ int retval; ++ ++ mutex_lock(&bus->mdio_lock); ++ retval = __mdiobus_c45_read(bus, addr, devad, regnum); ++ mutex_unlock(&bus->mdio_lock); ++ ++ return retval; ++} ++EXPORT_SYMBOL(mdiobus_c45_read); ++ ++/** + * mdiobus_write_nested - Nested version of the mdiobus_write function + * @bus: the mii_bus struct + * @addr: the phy address +@@ -928,6 +1045,31 @@ int mdiobus_write(struct mii_bus *bus, i + EXPORT_SYMBOL(mdiobus_write); + + /** ++ * mdiobus_c45_write - Convenience function for writing a given MII mgmt register ++ * @bus: the mii_bus struct ++ * @addr: the phy address ++ * @devad: device address to read ++ * @regnum: register number to write ++ * @val: value to write to @regnum ++ * ++ * NOTE: MUST NOT be called from interrupt context, ++ * because the bus read/write functions may wait for an interrupt ++ * to conclude the operation. ++ */ ++int mdiobus_c45_write(struct mii_bus *bus, int addr, int devad, u32 regnum, ++ u16 val) ++{ ++ int err; ++ ++ mutex_lock(&bus->mdio_lock); ++ err = __mdiobus_c45_write(bus, addr, devad, regnum, val); ++ mutex_unlock(&bus->mdio_lock); ++ ++ return err; ++} ++EXPORT_SYMBOL(mdiobus_c45_write); ++ ++/** + * mdiobus_modify - Convenience function for modifying a given mdio device + * register + * @bus: the mii_bus struct +@@ -949,6 +1091,30 @@ int mdiobus_modify(struct mii_bus *bus, + EXPORT_SYMBOL_GPL(mdiobus_modify); + + /** ++ * mdiobus_c45_modify - Convenience function for modifying a given mdio device ++ * register ++ * @bus: the mii_bus struct ++ * @addr: the phy address ++ * @devad: device address to read ++ * @regnum: register number to write ++ * @mask: bit mask of bits to clear ++ * @set: bit mask of bits to set ++ */ ++int mdiobus_c45_modify(struct mii_bus *bus, int addr, int devad, u32 regnum, ++ u16 mask, u16 set) ++{ ++ int err; ++ ++ mutex_lock(&bus->mdio_lock); ++ err = __mdiobus_c45_modify_changed(bus, addr, devad, regnum, ++ mask, set); ++ mutex_unlock(&bus->mdio_lock); ++ ++ return err < 0 ? err : 0; ++} ++EXPORT_SYMBOL_GPL(mdiobus_c45_modify); ++ ++/** + * mdiobus_modify_changed - Convenience function for modifying a given mdio + * device register and returning if it changed + * @bus: the mii_bus struct +@@ -971,6 +1137,29 @@ int mdiobus_modify_changed(struct mii_bu + EXPORT_SYMBOL_GPL(mdiobus_modify_changed); + + /** ++ * mdiobus_c45_modify_changed - Convenience function for modifying a given mdio ++ * device register and returning if it changed ++ * @bus: the mii_bus struct ++ * @addr: the phy address ++ * @devad: device address to read ++ * @regnum: register number to write ++ * @mask: bit mask of bits to clear ++ * @set: bit mask of bits to set ++ */ ++int mdiobus_c45_modify_changed(struct mii_bus *bus, int devad, int addr, ++ u32 regnum, u16 mask, u16 set) ++{ ++ int err; ++ ++ mutex_lock(&bus->mdio_lock); ++ err = __mdiobus_c45_modify_changed(bus, addr, devad, regnum, mask, set); ++ mutex_unlock(&bus->mdio_lock); ++ ++ return err; ++} ++EXPORT_SYMBOL_GPL(mdiobus_c45_modify_changed); ++ ++/** + * mdio_bus_match - determine if given MDIO driver supports the given + * MDIO device + * @dev: target MDIO device +--- a/include/linux/mdio.h ++++ b/include/linux/mdio.h +@@ -423,6 +423,17 @@ int mdiobus_modify(struct mii_bus *bus, + u16 set); + int mdiobus_modify_changed(struct mii_bus *bus, int addr, u32 regnum, + u16 mask, u16 set); ++int __mdiobus_c45_read(struct mii_bus *bus, int addr, int devad, u32 regnum); ++int mdiobus_c45_read(struct mii_bus *bus, int addr, int devad, u32 regnum); ++int __mdiobus_c45_write(struct mii_bus *bus, int addr, int devad, u32 regnum, ++ u16 val); ++int mdiobus_c45_write(struct mii_bus *bus, int addr, int devad, u32 regnum, ++ u16 val); ++int mdiobus_c45_modify(struct mii_bus *bus, int addr, int devad, u32 regnum, ++ u16 mask, u16 set); ++ ++int mdiobus_c45_modify_changed(struct mii_bus *bus, int addr, int devad, ++ u32 regnum, u16 mask, u16 set); + + static inline int mdiodev_read(struct mdio_device *mdiodev, u32 regnum) + { +@@ -463,29 +474,19 @@ static inline u16 mdiobus_c45_devad(u32 + return FIELD_GET(MII_DEVADDR_C45_MASK, regnum); + } + +-static inline int __mdiobus_c45_read(struct mii_bus *bus, int prtad, int devad, +- u16 regnum) +-{ +- return __mdiobus_read(bus, prtad, mdiobus_c45_addr(devad, regnum)); +-} +- +-static inline int __mdiobus_c45_write(struct mii_bus *bus, int prtad, int devad, +- u16 regnum, u16 val) +-{ +- return __mdiobus_write(bus, prtad, mdiobus_c45_addr(devad, regnum), +- val); +-} +- +-static inline int mdiobus_c45_read(struct mii_bus *bus, int prtad, int devad, +- u16 regnum) ++static inline int mdiodev_c45_modify(struct mdio_device *mdiodev, int devad, ++ u32 regnum, u16 mask, u16 set) + { +- return mdiobus_read(bus, prtad, mdiobus_c45_addr(devad, regnum)); ++ return mdiobus_c45_modify(mdiodev->bus, mdiodev->addr, devad, regnum, ++ mask, set); + } + +-static inline int mdiobus_c45_write(struct mii_bus *bus, int prtad, int devad, +- u16 regnum, u16 val) ++static inline int mdiodev_c45_modify_changed(struct mdio_device *mdiodev, ++ int devad, u32 regnum, u16 mask, ++ u16 set) + { +- return mdiobus_write(bus, prtad, mdiobus_c45_addr(devad, regnum), val); ++ return mdiobus_c45_modify_changed(mdiodev->bus, mdiodev->addr, devad, ++ regnum, mask, set); + } + + int mdiobus_register_device(struct mdio_device *mdiodev); +--- a/include/linux/phy.h ++++ b/include/linux/phy.h +@@ -364,6 +364,11 @@ struct mii_bus { + int (*read)(struct mii_bus *bus, int addr, int regnum); + /** @write: Perform a write transfer on the bus */ + int (*write)(struct mii_bus *bus, int addr, int regnum, u16 val); ++ /** @read_c45: Perform a C45 read transfer on the bus */ ++ int (*read_c45)(struct mii_bus *bus, int addr, int devnum, int regnum); ++ /** @write_c45: Perform a C45 write transfer on the bus */ ++ int (*write_c45)(struct mii_bus *bus, int addr, int devnum, ++ int regnum, u16 val); + /** @reset: Perform a reset of the bus */ + int (*reset)(struct mii_bus *bus); + diff --git a/target/linux/generic/backport-6.1/704-v6.6-net-phy-Introduce-PSGMII-PHY-interface-mode.patch b/target/linux/generic/backport-6.1/704-v6.6-net-phy-Introduce-PSGMII-PHY-interface-mode.patch new file mode 100644 index 0000000000..80210e6da1 --- /dev/null +++ b/target/linux/generic/backport-6.1/704-v6.6-net-phy-Introduce-PSGMII-PHY-interface-mode.patch @@ -0,0 +1,105 @@ +From 9a0e95e34e9c0a713ddfd48c3a88a20d2bdfd514 Mon Sep 17 00:00:00 2001 +From: Gabor Juhos +Date: Fri, 11 Aug 2023 13:10:07 +0200 +Subject: [PATCH] net: phy: Introduce PSGMII PHY interface mode + +The PSGMII interface is similar to QSGMII. The main difference +is that the PSGMII interface combines five SGMII lines into a +single link while in QSGMII only four lines are combined. + +Similarly to the QSGMII, this interface mode might also needs +special handling within the MAC driver. + +It is commonly used by Qualcomm with their QCA807x PHY series and +modern WiSoC-s. + +Add definitions for the PHY layer to allow to express this type +of connection between the MAC and PHY. + +Signed-off-by: Gabor Juhos +Signed-off-by: Robert Marko +Signed-off-by: David S. Miller +--- + Documentation/networking/phy.rst | 4 ++++ + drivers/net/phy/phy-core.c | 2 ++ + drivers/net/phy/phylink.c | 3 +++ + include/linux/phy.h | 4 ++++ + 4 files changed, 13 insertions(+) + +--- a/Documentation/networking/phy.rst ++++ b/Documentation/networking/phy.rst +@@ -323,6 +323,10 @@ Some of the interface modes are describe + contrast with the 1000BASE-X phy mode used for Clause 38 and 39 PMDs, this + interface mode has different autonegotiation and only supports full duplex. + ++``PHY_INTERFACE_MODE_PSGMII`` ++ This is the Penta SGMII mode, it is similar to QSGMII but it combines 5 ++ SGMII lines into a single link compared to 4 on QSGMII. ++ + Pause frames / flow control + =========================== + +--- a/drivers/net/phy/phy-core.c ++++ b/drivers/net/phy/phy-core.c +@@ -140,6 +140,8 @@ int phy_interface_num_ports(phy_interfac + case PHY_INTERFACE_MODE_QSGMII: + case PHY_INTERFACE_MODE_QUSGMII: + return 4; ++ case PHY_INTERFACE_MODE_PSGMII: ++ return 5; + case PHY_INTERFACE_MODE_MAX: + WARN_ONCE(1, "PHY_INTERFACE_MODE_MAX isn't a valid interface mode"); + return 0; +--- a/drivers/net/phy/phylink.c ++++ b/drivers/net/phy/phylink.c +@@ -187,6 +187,7 @@ static int phylink_interface_max_speed(p + case PHY_INTERFACE_MODE_RGMII_RXID: + case PHY_INTERFACE_MODE_RGMII_ID: + case PHY_INTERFACE_MODE_RGMII: ++ case PHY_INTERFACE_MODE_PSGMII: + case PHY_INTERFACE_MODE_QSGMII: + case PHY_INTERFACE_MODE_QUSGMII: + case PHY_INTERFACE_MODE_SGMII: +@@ -448,6 +449,7 @@ unsigned long phylink_get_capabilities(p + case PHY_INTERFACE_MODE_RGMII_RXID: + case PHY_INTERFACE_MODE_RGMII_ID: + case PHY_INTERFACE_MODE_RGMII: ++ case PHY_INTERFACE_MODE_PSGMII: + case PHY_INTERFACE_MODE_QSGMII: + case PHY_INTERFACE_MODE_QUSGMII: + case PHY_INTERFACE_MODE_SGMII: +@@ -814,6 +816,7 @@ static int phylink_parse_mode(struct phy + + switch (pl->link_config.interface) { + case PHY_INTERFACE_MODE_SGMII: ++ case PHY_INTERFACE_MODE_PSGMII: + case PHY_INTERFACE_MODE_QSGMII: + case PHY_INTERFACE_MODE_QUSGMII: + case PHY_INTERFACE_MODE_RGMII: +--- a/include/linux/phy.h ++++ b/include/linux/phy.h +@@ -103,6 +103,7 @@ extern const int phy_10gbit_features_arr + * @PHY_INTERFACE_MODE_XGMII: 10 gigabit media-independent interface + * @PHY_INTERFACE_MODE_XLGMII:40 gigabit media-independent interface + * @PHY_INTERFACE_MODE_MOCA: Multimedia over Coax ++ * @PHY_INTERFACE_MODE_PSGMII: Penta SGMII + * @PHY_INTERFACE_MODE_QSGMII: Quad SGMII + * @PHY_INTERFACE_MODE_TRGMII: Turbo RGMII + * @PHY_INTERFACE_MODE_100BASEX: 100 BaseX +@@ -140,6 +141,7 @@ typedef enum { + PHY_INTERFACE_MODE_XGMII, + PHY_INTERFACE_MODE_XLGMII, + PHY_INTERFACE_MODE_MOCA, ++ PHY_INTERFACE_MODE_PSGMII, + PHY_INTERFACE_MODE_QSGMII, + PHY_INTERFACE_MODE_TRGMII, + PHY_INTERFACE_MODE_100BASEX, +@@ -247,6 +249,8 @@ static inline const char *phy_modes(phy_ + return "xlgmii"; + case PHY_INTERFACE_MODE_MOCA: + return "moca"; ++ case PHY_INTERFACE_MODE_PSGMII: ++ return "psgmii"; + case PHY_INTERFACE_MODE_QSGMII: + return "qsgmii"; + case PHY_INTERFACE_MODE_TRGMII: diff --git a/target/linux/generic/backport-6.1/705-v6.4-net-phy-at803x-Replace-of_gpio.h-with-what-indeed-is.patch b/target/linux/generic/backport-6.1/705-v6.4-net-phy-at803x-Replace-of_gpio.h-with-what-indeed-is.patch new file mode 100644 index 0000000000..7cacb71b18 --- /dev/null +++ b/target/linux/generic/backport-6.1/705-v6.4-net-phy-at803x-Replace-of_gpio.h-with-what-indeed-is.patch @@ -0,0 +1,32 @@ +From a593a2fcfdfb92cfd0ffc54bc81b07e6bfaaaf46 Mon Sep 17 00:00:00 2001 +From: Andy Shevchenko +Date: Thu, 16 Mar 2023 14:08:26 +0200 +Subject: [PATCH] net: phy: at803x: Replace of_gpio.h with what indeed is used + +of_gpio.h in this driver is solely used as a proxy to other headers. +This is incorrect usage of the of_gpio.h. Replace it .h with what +indeed is used in the code. + +Signed-off-by: Andy Shevchenko +Reviewed-by: Andrew Lunn +Signed-off-by: David S. Miller +--- + drivers/net/phy/at803x.c | 3 +-- + 1 file changed, 1 insertion(+), 2 deletions(-) + +--- a/drivers/net/phy/at803x.c ++++ b/drivers/net/phy/at803x.c +@@ -13,12 +13,11 @@ + #include + #include + #include +-#include + #include +-#include + #include + #include + #include ++#include + #include + #include + #include diff --git a/target/linux/generic/backport-6.1/706-v6.6-01-net-phy-at803x-support-qca8081-genphy_c45_pma_read_a.patch b/target/linux/generic/backport-6.1/706-v6.6-01-net-phy-at803x-support-qca8081-genphy_c45_pma_read_a.patch new file mode 100644 index 0000000000..dab4928960 --- /dev/null +++ b/target/linux/generic/backport-6.1/706-v6.6-01-net-phy-at803x-support-qca8081-genphy_c45_pma_read_a.patch @@ -0,0 +1,70 @@ +From 8b8bc13d89a7d23d14b0e041c73f037c9db997b1 Mon Sep 17 00:00:00 2001 +From: Luo Jie +Date: Sun, 16 Jul 2023 16:49:19 +0800 +Subject: [PATCH 1/6] net: phy: at803x: support qca8081 + genphy_c45_pma_read_abilities + +qca8081 PHY supports to use genphy_c45_pma_read_abilities for +getting the PHY features supported except for the autoneg ability + +but autoneg ability exists in MDIO_STAT1 instead of MMD7.1, add it +manually after calling genphy_c45_pma_read_abilities. + +Signed-off-by: Luo Jie +Reviewed-by: Russell King (Oracle) +Signed-off-by: David S. Miller +--- + drivers/net/phy/at803x.c | 28 ++++++++++++++++++---------- + 1 file changed, 18 insertions(+), 10 deletions(-) + +--- a/drivers/net/phy/at803x.c ++++ b/drivers/net/phy/at803x.c +@@ -902,15 +902,6 @@ static int at803x_get_features(struct ph + if (err) + return err; + +- if (phydev->drv->phy_id == QCA8081_PHY_ID) { +- err = phy_read_mmd(phydev, MDIO_MMD_PMAPMD, MDIO_PMA_NG_EXTABLE); +- if (err < 0) +- return err; +- +- linkmode_mod_bit(ETHTOOL_LINK_MODE_2500baseT_Full_BIT, phydev->supported, +- err & MDIO_PMA_NG_EXTABLE_2_5GBT); +- } +- + if (phydev->drv->phy_id != ATH8031_PHY_ID) + return 0; + +@@ -1996,6 +1987,23 @@ static int qca808x_cable_test_get_status + return 0; + } + ++static int qca808x_get_features(struct phy_device *phydev) ++{ ++ int ret; ++ ++ ret = genphy_c45_pma_read_abilities(phydev); ++ if (ret) ++ return ret; ++ ++ /* The autoneg ability is not existed in bit3 of MMD7.1, ++ * but it is supported by qca808x PHY, so we add it here ++ * manually. ++ */ ++ linkmode_set_bit(ETHTOOL_LINK_MODE_Autoneg_BIT, phydev->supported); ++ ++ return 0; ++} ++ + static struct phy_driver at803x_driver[] = { + { + /* Qualcomm Atheros AR8035 */ +@@ -2163,7 +2171,7 @@ static struct phy_driver at803x_driver[] + .set_tunable = at803x_set_tunable, + .set_wol = at803x_set_wol, + .get_wol = at803x_get_wol, +- .get_features = at803x_get_features, ++ .get_features = qca808x_get_features, + .config_aneg = at803x_config_aneg, + .suspend = genphy_suspend, + .resume = genphy_resume, diff --git a/target/linux/generic/backport-6.1/706-v6.6-02-net-phy-at803x-merge-qca8081-slave-seed-function.patch b/target/linux/generic/backport-6.1/706-v6.6-02-net-phy-at803x-merge-qca8081-slave-seed-function.patch new file mode 100644 index 0000000000..28874068ce --- /dev/null +++ b/target/linux/generic/backport-6.1/706-v6.6-02-net-phy-at803x-merge-qca8081-slave-seed-function.patch @@ -0,0 +1,73 @@ +From f3db55ae860a82e1224a909072783ef850e5d228 Mon Sep 17 00:00:00 2001 +From: Luo Jie +Date: Sun, 16 Jul 2023 16:49:20 +0800 +Subject: [PATCH 2/6] net: phy: at803x: merge qca8081 slave seed function + +merge the seed enablement and seed value configuration into +one function, since the random seed value is needed to be +configured when the seed is enabled. + +Signed-off-by: Luo Jie +Reviewed-by: Russell King (Oracle) +Signed-off-by: David S. Miller +--- + drivers/net/phy/at803x.c | 29 +++++++++-------------------- + 1 file changed, 9 insertions(+), 20 deletions(-) + +--- a/drivers/net/phy/at803x.c ++++ b/drivers/net/phy/at803x.c +@@ -1730,24 +1730,19 @@ static int qca808x_phy_fast_retrain_conf + return 0; + } + +-static int qca808x_phy_ms_random_seed_set(struct phy_device *phydev) +-{ +- u16 seed_value = prandom_u32_max(QCA808X_MASTER_SLAVE_SEED_RANGE); +- +- return at803x_debug_reg_mask(phydev, QCA808X_PHY_DEBUG_LOCAL_SEED, +- QCA808X_MASTER_SLAVE_SEED_CFG, +- FIELD_PREP(QCA808X_MASTER_SLAVE_SEED_CFG, seed_value)); +-} +- + static int qca808x_phy_ms_seed_enable(struct phy_device *phydev, bool enable) + { +- u16 seed_enable = 0; ++ u16 seed_value; + +- if (enable) +- seed_enable = QCA808X_MASTER_SLAVE_SEED_ENABLE; ++ if (!enable) ++ return at803x_debug_reg_mask(phydev, QCA808X_PHY_DEBUG_LOCAL_SEED, ++ QCA808X_MASTER_SLAVE_SEED_ENABLE, 0); + ++ seed_value = prandom_u32_max(QCA808X_MASTER_SLAVE_SEED_RANGE); + return at803x_debug_reg_mask(phydev, QCA808X_PHY_DEBUG_LOCAL_SEED, +- QCA808X_MASTER_SLAVE_SEED_ENABLE, seed_enable); ++ QCA808X_MASTER_SLAVE_SEED_CFG | QCA808X_MASTER_SLAVE_SEED_ENABLE, ++ FIELD_PREP(QCA808X_MASTER_SLAVE_SEED_CFG, seed_value) | ++ QCA808X_MASTER_SLAVE_SEED_ENABLE); + } + + static int qca808x_config_init(struct phy_device *phydev) +@@ -1771,12 +1766,7 @@ static int qca808x_config_init(struct ph + if (ret) + return ret; + +- /* Configure lower ramdom seed to make phy linked as slave mode */ +- ret = qca808x_phy_ms_random_seed_set(phydev); +- if (ret) +- return ret; +- +- /* Enable seed */ ++ /* Enable seed and configure lower ramdom seed to make phy linked as slave mode */ + ret = qca808x_phy_ms_seed_enable(phydev, true); + if (ret) + return ret; +@@ -1821,7 +1811,6 @@ static int qca808x_read_status(struct ph + if (phydev->master_slave_state == MASTER_SLAVE_STATE_ERR) { + qca808x_phy_ms_seed_enable(phydev, false); + } else { +- qca808x_phy_ms_random_seed_set(phydev); + qca808x_phy_ms_seed_enable(phydev, true); + } + } diff --git a/target/linux/generic/backport-6.1/706-v6.6-03-net-phy-at803x-enable-qca8081-slave-seed-conditional.patch b/target/linux/generic/backport-6.1/706-v6.6-03-net-phy-at803x-enable-qca8081-slave-seed-conditional.patch new file mode 100644 index 0000000000..b91d2cab30 --- /dev/null +++ b/target/linux/generic/backport-6.1/706-v6.6-03-net-phy-at803x-enable-qca8081-slave-seed-conditional.patch @@ -0,0 +1,76 @@ +From 7cc3209558002d95c0d45a1276ba4f5f741eec42 Mon Sep 17 00:00:00 2001 +From: Luo Jie +Date: Sun, 16 Jul 2023 16:49:21 +0800 +Subject: [PATCH 3/6] net: phy: at803x: enable qca8081 slave seed conditionally + +qca8081 is the single port PHY, the slave prefer mode is used +by default. + +if the phy master perfer mode is configured, the slave seed +configuration should not be enabled, since the slave seed +enablement is for making PHY linked as slave mode easily. + +disable slave seed if the master mode is preferred. + +Signed-off-by: Luo Jie +Reviewed-by: Andrew Lunn +Signed-off-by: David S. Miller +--- + drivers/net/phy/at803x.c | 25 ++++++++++++++++++++----- + 1 file changed, 20 insertions(+), 5 deletions(-) + +--- a/drivers/net/phy/at803x.c ++++ b/drivers/net/phy/at803x.c +@@ -1745,6 +1745,12 @@ static int qca808x_phy_ms_seed_enable(st + QCA808X_MASTER_SLAVE_SEED_ENABLE); + } + ++static bool qca808x_is_prefer_master(struct phy_device *phydev) ++{ ++ return (phydev->master_slave_get == MASTER_SLAVE_CFG_MASTER_FORCE) || ++ (phydev->master_slave_get == MASTER_SLAVE_CFG_MASTER_PREFERRED); ++} ++ + static int qca808x_config_init(struct phy_device *phydev) + { + int ret; +@@ -1766,11 +1772,17 @@ static int qca808x_config_init(struct ph + if (ret) + return ret; + +- /* Enable seed and configure lower ramdom seed to make phy linked as slave mode */ +- ret = qca808x_phy_ms_seed_enable(phydev, true); +- if (ret) ++ ret = genphy_read_master_slave(phydev); ++ if (ret < 0) + return ret; + ++ if (!qca808x_is_prefer_master(phydev)) { ++ /* Enable seed and configure lower ramdom seed to make phy linked as slave mode */ ++ ret = qca808x_phy_ms_seed_enable(phydev, true); ++ if (ret) ++ return ret; ++ } ++ + /* Configure adc threshold as 100mv for the link 10M */ + return at803x_debug_reg_mask(phydev, QCA808X_PHY_DEBUG_ADC_THRESHOLD, + QCA808X_ADC_THRESHOLD_MASK, QCA808X_ADC_THRESHOLD_100MV); +@@ -1802,13 +1814,16 @@ static int qca808x_read_status(struct ph + phydev->interface = PHY_INTERFACE_MODE_SGMII; + } else { + /* generate seed as a lower random value to make PHY linked as SLAVE easily, +- * except for master/slave configuration fault detected. ++ * except for master/slave configuration fault detected or the master mode ++ * preferred. ++ * + * the reason for not putting this code into the function link_change_notify is + * the corner case where the link partner is also the qca8081 PHY and the seed + * value is configured as the same value, the link can't be up and no link change + * occurs. + */ +- if (phydev->master_slave_state == MASTER_SLAVE_STATE_ERR) { ++ if (phydev->master_slave_state == MASTER_SLAVE_STATE_ERR || ++ qca808x_is_prefer_master(phydev)) { + qca808x_phy_ms_seed_enable(phydev, false); + } else { + qca808x_phy_ms_seed_enable(phydev, true); diff --git a/target/linux/generic/backport-6.1/706-v6.6-04-net-phy-at803x-support-qca8081-1G-chip-type.patch b/target/linux/generic/backport-6.1/706-v6.6-04-net-phy-at803x-support-qca8081-1G-chip-type.patch new file mode 100644 index 0000000000..b8db89d853 --- /dev/null +++ b/target/linux/generic/backport-6.1/706-v6.6-04-net-phy-at803x-support-qca8081-1G-chip-type.patch @@ -0,0 +1,48 @@ +From fea7cfb83d1a2782e39cd101dd44ed2548539de5 Mon Sep 17 00:00:00 2001 +From: Luo Jie +Date: Sun, 16 Jul 2023 16:49:22 +0800 +Subject: [PATCH 4/6] net: phy: at803x: support qca8081 1G chip type + +The qca8081 1G chip version does not support 2.5 capability, which +is distinguished from qca8081 2.5G chip according to the bit0 of +register mmd7.0x901d, the 1G version chip also has the same PHY ID +as the normal qca8081 2.5G chip. + +Signed-off-by: Luo Jie +Reviewed-by: Russell King (Oracle) +Signed-off-by: David S. Miller +--- + drivers/net/phy/at803x.c | 15 +++++++++++++++ + 1 file changed, 15 insertions(+) + +--- a/drivers/net/phy/at803x.c ++++ b/drivers/net/phy/at803x.c +@@ -272,6 +272,10 @@ + #define QCA808X_CDT_STATUS_STAT_OPEN 2 + #define QCA808X_CDT_STATUS_STAT_SHORT 3 + ++/* QCA808X 1G chip type */ ++#define QCA808X_PHY_MMD7_CHIP_TYPE 0x901d ++#define QCA808X_PHY_CHIP_TYPE_1G BIT(0) ++ + MODULE_DESCRIPTION("Qualcomm Atheros AR803x and QCA808X PHY driver"); + MODULE_AUTHOR("Matus Ujhelyi"); + MODULE_LICENSE("GPL"); +@@ -2005,6 +2009,17 @@ static int qca808x_get_features(struct p + */ + linkmode_set_bit(ETHTOOL_LINK_MODE_Autoneg_BIT, phydev->supported); + ++ /* As for the qca8081 1G version chip, the 2500baseT ability is also ++ * existed in the bit0 of MMD1.21, we need to remove it manually if ++ * it is the qca8081 1G chip according to the bit0 of MMD7.0x901d. ++ */ ++ ret = phy_read_mmd(phydev, MDIO_MMD_AN, QCA808X_PHY_MMD7_CHIP_TYPE); ++ if (ret < 0) ++ return ret; ++ ++ if (QCA808X_PHY_CHIP_TYPE_1G & ret) ++ linkmode_clear_bit(ETHTOOL_LINK_MODE_2500baseT_Full_BIT, phydev->supported); ++ + return 0; + } + diff --git a/target/linux/generic/backport-6.1/706-v6.6-05-net-phy-at803x-remove-qca8081-1G-fast-retrain-and-sl.patch b/target/linux/generic/backport-6.1/706-v6.6-05-net-phy-at803x-remove-qca8081-1G-fast-retrain-and-sl.patch new file mode 100644 index 0000000000..b54a86e5f5 --- /dev/null +++ b/target/linux/generic/backport-6.1/706-v6.6-05-net-phy-at803x-remove-qca8081-1G-fast-retrain-and-sl.patch @@ -0,0 +1,98 @@ +From df9401ff3e6eeaa42bfb06761967f1b71f5afce7 Mon Sep 17 00:00:00 2001 +From: Luo Jie +Date: Sun, 16 Jul 2023 16:49:23 +0800 +Subject: [PATCH 5/6] net: phy: at803x: remove qca8081 1G fast retrain and + slave seed config + +The fast retrain and slave seed configs are only applicable when the 2.5G +ability is supported. + +Signed-off-by: Luo Jie +Reviewed-by: Andrew Lunn +Signed-off-by: David S. Miller +--- + drivers/net/phy/at803x.c | 50 +++++++++++++++++++++++++--------------- + 1 file changed, 32 insertions(+), 18 deletions(-) + +--- a/drivers/net/phy/at803x.c ++++ b/drivers/net/phy/at803x.c +@@ -1755,6 +1755,11 @@ static bool qca808x_is_prefer_master(str + (phydev->master_slave_get == MASTER_SLAVE_CFG_MASTER_PREFERRED); + } + ++static bool qca808x_has_fast_retrain_or_slave_seed(struct phy_device *phydev) ++{ ++ return linkmode_test_bit(ETHTOOL_LINK_MODE_2500baseT_Full_BIT, phydev->supported); ++} ++ + static int qca808x_config_init(struct phy_device *phydev) + { + int ret; +@@ -1771,20 +1776,24 @@ static int qca808x_config_init(struct ph + if (ret) + return ret; + +- /* Config the fast retrain for the link 2500M */ +- ret = qca808x_phy_fast_retrain_config(phydev); +- if (ret) +- return ret; +- +- ret = genphy_read_master_slave(phydev); +- if (ret < 0) +- return ret; +- +- if (!qca808x_is_prefer_master(phydev)) { +- /* Enable seed and configure lower ramdom seed to make phy linked as slave mode */ +- ret = qca808x_phy_ms_seed_enable(phydev, true); ++ if (qca808x_has_fast_retrain_or_slave_seed(phydev)) { ++ /* Config the fast retrain for the link 2500M */ ++ ret = qca808x_phy_fast_retrain_config(phydev); + if (ret) + return ret; ++ ++ ret = genphy_read_master_slave(phydev); ++ if (ret < 0) ++ return ret; ++ ++ if (!qca808x_is_prefer_master(phydev)) { ++ /* Enable seed and configure lower ramdom seed to make phy ++ * linked as slave mode. ++ */ ++ ret = qca808x_phy_ms_seed_enable(phydev, true); ++ if (ret) ++ return ret; ++ } + } + + /* Configure adc threshold as 100mv for the link 10M */ +@@ -1826,11 +1835,13 @@ static int qca808x_read_status(struct ph + * value is configured as the same value, the link can't be up and no link change + * occurs. + */ +- if (phydev->master_slave_state == MASTER_SLAVE_STATE_ERR || +- qca808x_is_prefer_master(phydev)) { +- qca808x_phy_ms_seed_enable(phydev, false); +- } else { +- qca808x_phy_ms_seed_enable(phydev, true); ++ if (qca808x_has_fast_retrain_or_slave_seed(phydev)) { ++ if (phydev->master_slave_state == MASTER_SLAVE_STATE_ERR || ++ qca808x_is_prefer_master(phydev)) { ++ qca808x_phy_ms_seed_enable(phydev, false); ++ } else { ++ qca808x_phy_ms_seed_enable(phydev, true); ++ } + } + } + +@@ -1845,7 +1856,10 @@ static int qca808x_soft_reset(struct phy + if (ret < 0) + return ret; + +- return qca808x_phy_ms_seed_enable(phydev, true); ++ if (qca808x_has_fast_retrain_or_slave_seed(phydev)) ++ ret = qca808x_phy_ms_seed_enable(phydev, true); ++ ++ return ret; + } + + static bool qca808x_cdt_fault_length_valid(int cdt_code) diff --git a/target/linux/generic/backport-6.1/706-v6.6-06-net-phy-at803x-add-qca8081-fifo-reset-on-the-link-ch.patch b/target/linux/generic/backport-6.1/706-v6.6-06-net-phy-at803x-add-qca8081-fifo-reset-on-the-link-ch.patch new file mode 100644 index 0000000000..e382cf7876 --- /dev/null +++ b/target/linux/generic/backport-6.1/706-v6.6-06-net-phy-at803x-add-qca8081-fifo-reset-on-the-link-ch.patch @@ -0,0 +1,55 @@ +From 723970affdd8766fa0d91cd34bf2ffc861538b5f Mon Sep 17 00:00:00 2001 +From: Luo Jie +Date: Sun, 16 Jul 2023 16:49:24 +0800 +Subject: [PATCH 6/6] net: phy: at803x: add qca8081 fifo reset on the link + changed + +The qca8081 sgmii fifo needs to be reset on link down and +released on the link up in case of any abnormal issue +such as the packet blocked on the PHY. + +Signed-off-by: Luo Jie +Reviewed-by: Andrew Lunn +Reviewed-by: Russell King (Oracle) +Signed-off-by: David S. Miller +--- + drivers/net/phy/at803x.c | 14 ++++++++++++++ + 1 file changed, 14 insertions(+) + +--- a/drivers/net/phy/at803x.c ++++ b/drivers/net/phy/at803x.c +@@ -276,6 +276,9 @@ + #define QCA808X_PHY_MMD7_CHIP_TYPE 0x901d + #define QCA808X_PHY_CHIP_TYPE_1G BIT(0) + ++#define QCA8081_PHY_SERDES_MMD1_FIFO_CTRL 0x9072 ++#define QCA8081_PHY_FIFO_RSTN BIT(11) ++ + MODULE_DESCRIPTION("Qualcomm Atheros AR803x and QCA808X PHY driver"); + MODULE_AUTHOR("Matus Ujhelyi"); + MODULE_LICENSE("GPL"); +@@ -2037,6 +2040,16 @@ static int qca808x_get_features(struct p + return 0; + } + ++static void qca808x_link_change_notify(struct phy_device *phydev) ++{ ++ /* Assert interface sgmii fifo on link down, deassert it on link up, ++ * the interface device address is always phy address added by 1. ++ */ ++ mdiobus_c45_modify_changed(phydev->mdio.bus, phydev->mdio.addr + 1, ++ MDIO_MMD_PMAPMD, QCA8081_PHY_SERDES_MMD1_FIFO_CTRL, ++ QCA8081_PHY_FIFO_RSTN, phydev->link ? QCA8081_PHY_FIFO_RSTN : 0); ++} ++ + static struct phy_driver at803x_driver[] = { + { + /* Qualcomm Atheros AR8035 */ +@@ -2213,6 +2226,7 @@ static struct phy_driver at803x_driver[] + .soft_reset = qca808x_soft_reset, + .cable_test_start = qca808x_cable_test_start, + .cable_test_get_status = qca808x_cable_test_get_status, ++ .link_change_notify = qca808x_link_change_notify, + }, }; + + module_phy_driver(at803x_driver); diff --git a/target/linux/generic/backport-6.1/707-v6.8-01-net-phy-at803x-fix-passing-the-wrong-reference-for-c.patch b/target/linux/generic/backport-6.1/707-v6.8-01-net-phy-at803x-fix-passing-the-wrong-reference-for-c.patch new file mode 100644 index 0000000000..b206b18052 --- /dev/null +++ b/target/linux/generic/backport-6.1/707-v6.8-01-net-phy-at803x-fix-passing-the-wrong-reference-for-c.patch @@ -0,0 +1,45 @@ +From f8fdbf3389f44c7026f16e36cb1f2ff017f7f5b2 Mon Sep 17 00:00:00 2001 +From: Christian Marangi +Date: Fri, 8 Dec 2023 15:51:48 +0100 +Subject: [PATCH 01/13] net: phy: at803x: fix passing the wrong reference for + config_intr + +Fix passing the wrong reference for config_initr on passing the function +pointer, drop the wrong & from at803x_config_intr in the PHY struct. + +Signed-off-by: Christian Marangi +Reviewed-by: Andrew Lunn +Signed-off-by: David S. Miller +--- + drivers/net/phy/at803x.c | 6 +++--- + 1 file changed, 3 insertions(+), 3 deletions(-) + +--- a/drivers/net/phy/at803x.c ++++ b/drivers/net/phy/at803x.c +@@ -2104,7 +2104,7 @@ static struct phy_driver at803x_driver[] + .write_page = at803x_write_page, + .get_features = at803x_get_features, + .read_status = at803x_read_status, +- .config_intr = &at803x_config_intr, ++ .config_intr = at803x_config_intr, + .handle_interrupt = at803x_handle_interrupt, + .get_tunable = at803x_get_tunable, + .set_tunable = at803x_set_tunable, +@@ -2134,7 +2134,7 @@ static struct phy_driver at803x_driver[] + .resume = at803x_resume, + .flags = PHY_POLL_CABLE_TEST, + /* PHY_BASIC_FEATURES */ +- .config_intr = &at803x_config_intr, ++ .config_intr = at803x_config_intr, + .handle_interrupt = at803x_handle_interrupt, + .cable_test_start = at803x_cable_test_start, + .cable_test_get_status = at803x_cable_test_get_status, +@@ -2150,7 +2150,7 @@ static struct phy_driver at803x_driver[] + .resume = at803x_resume, + .flags = PHY_POLL_CABLE_TEST, + /* PHY_BASIC_FEATURES */ +- .config_intr = &at803x_config_intr, ++ .config_intr = at803x_config_intr, + .handle_interrupt = at803x_handle_interrupt, + .cable_test_start = at803x_cable_test_start, + .cable_test_get_status = at803x_cable_test_get_status, diff --git a/target/linux/generic/backport-6.1/707-v6.8-02-net-phy-at803x-move-disable-WOL-to-specific-at8031-p.patch b/target/linux/generic/backport-6.1/707-v6.8-02-net-phy-at803x-move-disable-WOL-to-specific-at8031-p.patch new file mode 100644 index 0000000000..eb9172b1cc --- /dev/null +++ b/target/linux/generic/backport-6.1/707-v6.8-02-net-phy-at803x-move-disable-WOL-to-specific-at8031-p.patch @@ -0,0 +1,69 @@ +From 6a3b8c573b5a152a6aa7a0b54c5e18b84c6ba6f5 Mon Sep 17 00:00:00 2001 +From: Christian Marangi +Date: Fri, 8 Dec 2023 15:51:49 +0100 +Subject: [PATCH 02/13] net: phy: at803x: move disable WOL to specific at8031 + probe + +Move the WOL disable call to specific at8031 probe to make at803x_probe +more generic and drop extra check for PHY ID. + +Keep the same previous behaviour by first calling at803x_probe and then +disabling WOL. + +Signed-off-by: Christian Marangi +Reviewed-by: Andrew Lunn +Signed-off-by: David S. Miller +--- + drivers/net/phy/at803x.c | 27 +++++++++++++++++---------- + 1 file changed, 17 insertions(+), 10 deletions(-) + +--- a/drivers/net/phy/at803x.c ++++ b/drivers/net/phy/at803x.c +@@ -886,15 +886,6 @@ static int at803x_probe(struct phy_devic + priv->is_fiber = true; + break; + } +- +- /* Disable WoL in 1588 register which is enabled +- * by default +- */ +- ret = phy_modify_mmd(phydev, MDIO_MMD_PCS, +- AT803X_PHY_MMD3_WOL_CTRL, +- AT803X_WOL_EN, 0); +- if (ret) +- return ret; + } + + return 0; +@@ -1591,6 +1582,22 @@ static int at803x_cable_test_start(struc + return 0; + } + ++static int at8031_probe(struct phy_device *phydev) ++{ ++ int ret; ++ ++ ret = at803x_probe(phydev); ++ if (ret) ++ return ret; ++ ++ /* Disable WoL in 1588 register which is enabled ++ * by default ++ */ ++ return phy_modify_mmd(phydev, MDIO_MMD_PCS, ++ AT803X_PHY_MMD3_WOL_CTRL, ++ AT803X_WOL_EN, 0); ++} ++ + static int qca83xx_config_init(struct phy_device *phydev) + { + u8 switch_revision; +@@ -2092,7 +2099,7 @@ static struct phy_driver at803x_driver[] + PHY_ID_MATCH_EXACT(ATH8031_PHY_ID), + .name = "Qualcomm Atheros AR8031/AR8033", + .flags = PHY_POLL_CABLE_TEST, +- .probe = at803x_probe, ++ .probe = at8031_probe, + .config_init = at803x_config_init, + .config_aneg = at803x_config_aneg, + .soft_reset = genphy_soft_reset, diff --git a/target/linux/generic/backport-6.1/707-v6.8-03-net-phy-at803x-raname-hw_stats-functions-to-qca83xx-.patch b/target/linux/generic/backport-6.1/707-v6.8-03-net-phy-at803x-raname-hw_stats-functions-to-qca83xx-.patch new file mode 100644 index 0000000000..5a9d1764f1 --- /dev/null +++ b/target/linux/generic/backport-6.1/707-v6.8-03-net-phy-at803x-raname-hw_stats-functions-to-qca83xx-.patch @@ -0,0 +1,129 @@ +From 07b1ad83b9ed6db1735ba10baf67b7a565ac0cef Mon Sep 17 00:00:00 2001 +From: Christian Marangi +Date: Fri, 8 Dec 2023 15:51:50 +0100 +Subject: [PATCH 03/13] net: phy: at803x: raname hw_stats functions to qca83xx + specific name + +The function and the struct related to hw_stats were specific to qca83xx +PHY but were called following the convention in the driver of calling +everything with at803x prefix. + +To better organize the code, rename these function a more specific name +to better describe that they are specific to 83xx PHY family. + +Signed-off-by: Christian Marangi +Reviewed-by: Andrew Lunn +Signed-off-by: David S. Miller +--- + drivers/net/phy/at803x.c | 44 ++++++++++++++++++++-------------------- + 1 file changed, 22 insertions(+), 22 deletions(-) + +--- a/drivers/net/phy/at803x.c ++++ b/drivers/net/phy/at803x.c +@@ -295,7 +295,7 @@ struct at803x_hw_stat { + enum stat_access_type access_type; + }; + +-static struct at803x_hw_stat at803x_hw_stats[] = { ++static struct at803x_hw_stat qca83xx_hw_stats[] = { + { "phy_idle_errors", 0xa, GENMASK(7, 0), PHY}, + { "phy_receive_errors", 0x15, GENMASK(15, 0), PHY}, + { "eee_wake_errors", 0x16, GENMASK(15, 0), MMD}, +@@ -311,7 +311,7 @@ struct at803x_priv { + bool is_1000basex; + struct regulator_dev *vddio_rdev; + struct regulator_dev *vddh_rdev; +- u64 stats[ARRAY_SIZE(at803x_hw_stats)]; ++ u64 stats[ARRAY_SIZE(qca83xx_hw_stats)]; + }; + + struct at803x_context { +@@ -529,24 +529,24 @@ static void at803x_get_wol(struct phy_de + wol->wolopts |= WAKE_MAGIC; + } + +-static int at803x_get_sset_count(struct phy_device *phydev) ++static int qca83xx_get_sset_count(struct phy_device *phydev) + { +- return ARRAY_SIZE(at803x_hw_stats); ++ return ARRAY_SIZE(qca83xx_hw_stats); + } + +-static void at803x_get_strings(struct phy_device *phydev, u8 *data) ++static void qca83xx_get_strings(struct phy_device *phydev, u8 *data) + { + int i; + +- for (i = 0; i < ARRAY_SIZE(at803x_hw_stats); i++) { ++ for (i = 0; i < ARRAY_SIZE(qca83xx_hw_stats); i++) { + strscpy(data + i * ETH_GSTRING_LEN, +- at803x_hw_stats[i].string, ETH_GSTRING_LEN); ++ qca83xx_hw_stats[i].string, ETH_GSTRING_LEN); + } + } + +-static u64 at803x_get_stat(struct phy_device *phydev, int i) ++static u64 qca83xx_get_stat(struct phy_device *phydev, int i) + { +- struct at803x_hw_stat stat = at803x_hw_stats[i]; ++ struct at803x_hw_stat stat = qca83xx_hw_stats[i]; + struct at803x_priv *priv = phydev->priv; + int val; + u64 ret; +@@ -567,13 +567,13 @@ static u64 at803x_get_stat(struct phy_de + return ret; + } + +-static void at803x_get_stats(struct phy_device *phydev, +- struct ethtool_stats *stats, u64 *data) ++static void qca83xx_get_stats(struct phy_device *phydev, ++ struct ethtool_stats *stats, u64 *data) + { + int i; + +- for (i = 0; i < ARRAY_SIZE(at803x_hw_stats); i++) +- data[i] = at803x_get_stat(phydev, i); ++ for (i = 0; i < ARRAY_SIZE(qca83xx_hw_stats); i++) ++ data[i] = qca83xx_get_stat(phydev, i); + } + + static int at803x_suspend(struct phy_device *phydev) +@@ -2175,9 +2175,9 @@ static struct phy_driver at803x_driver[] + .flags = PHY_IS_INTERNAL, + .config_init = qca83xx_config_init, + .soft_reset = genphy_soft_reset, +- .get_sset_count = at803x_get_sset_count, +- .get_strings = at803x_get_strings, +- .get_stats = at803x_get_stats, ++ .get_sset_count = qca83xx_get_sset_count, ++ .get_strings = qca83xx_get_strings, ++ .get_stats = qca83xx_get_stats, + .suspend = qca83xx_suspend, + .resume = qca83xx_resume, + }, { +@@ -2191,9 +2191,9 @@ static struct phy_driver at803x_driver[] + .flags = PHY_IS_INTERNAL, + .config_init = qca83xx_config_init, + .soft_reset = genphy_soft_reset, +- .get_sset_count = at803x_get_sset_count, +- .get_strings = at803x_get_strings, +- .get_stats = at803x_get_stats, ++ .get_sset_count = qca83xx_get_sset_count, ++ .get_strings = qca83xx_get_strings, ++ .get_stats = qca83xx_get_stats, + .suspend = qca83xx_suspend, + .resume = qca83xx_resume, + }, { +@@ -2207,9 +2207,9 @@ static struct phy_driver at803x_driver[] + .flags = PHY_IS_INTERNAL, + .config_init = qca83xx_config_init, + .soft_reset = genphy_soft_reset, +- .get_sset_count = at803x_get_sset_count, +- .get_strings = at803x_get_strings, +- .get_stats = at803x_get_stats, ++ .get_sset_count = qca83xx_get_sset_count, ++ .get_strings = qca83xx_get_strings, ++ .get_stats = qca83xx_get_stats, + .suspend = qca83xx_suspend, + .resume = qca83xx_resume, + }, { diff --git a/target/linux/generic/backport-6.1/707-v6.8-04-net-phy-at803x-move-qca83xx-specific-check-in-dedica.patch b/target/linux/generic/backport-6.1/707-v6.8-04-net-phy-at803x-move-qca83xx-specific-check-in-dedica.patch new file mode 100644 index 0000000000..f09142c5ed --- /dev/null +++ b/target/linux/generic/backport-6.1/707-v6.8-04-net-phy-at803x-move-qca83xx-specific-check-in-dedica.patch @@ -0,0 +1,155 @@ +From d43cff3f82336c0bd965ea552232d9f4ddac71a6 Mon Sep 17 00:00:00 2001 +From: Christian Marangi +Date: Fri, 8 Dec 2023 15:51:51 +0100 +Subject: [PATCH 04/13] net: phy: at803x: move qca83xx specific check in + dedicated functions + +Rework qca83xx specific check to dedicated function to tidy things up +and drop useless phy_id check. + +Also drop an useless link_change_notify for QCA8337 as it did nothing an +returned early. + +Signed-off-by: Christian Marangi +Reviewed-by: Andrew Lunn +Signed-off-by: David S. Miller +--- + drivers/net/phy/at803x.c | 68 ++++++++++++++++++++++------------------ + 1 file changed, 37 insertions(+), 31 deletions(-) + +--- a/drivers/net/phy/at803x.c ++++ b/drivers/net/phy/at803x.c +@@ -1623,27 +1623,26 @@ static int qca83xx_config_init(struct ph + break; + } + ++ /* Following original QCA sourcecode set port to prefer master */ ++ phy_set_bits(phydev, MII_CTRL1000, CTL1000_PREFER_MASTER); ++ ++ return 0; ++} ++ ++static int qca8327_config_init(struct phy_device *phydev) ++{ + /* QCA8327 require DAC amplitude adjustment for 100m set to +6%. + * Disable on init and enable only with 100m speed following + * qca original source code. + */ +- if (phydev->drv->phy_id == QCA8327_A_PHY_ID || +- phydev->drv->phy_id == QCA8327_B_PHY_ID) +- at803x_debug_reg_mask(phydev, AT803X_DEBUG_ANALOG_TEST_CTRL, +- QCA8327_DEBUG_MANU_CTRL_EN, 0); ++ at803x_debug_reg_mask(phydev, AT803X_DEBUG_ANALOG_TEST_CTRL, ++ QCA8327_DEBUG_MANU_CTRL_EN, 0); + +- /* Following original QCA sourcecode set port to prefer master */ +- phy_set_bits(phydev, MII_CTRL1000, CTL1000_PREFER_MASTER); +- +- return 0; ++ return qca83xx_config_init(phydev); + } + + static void qca83xx_link_change_notify(struct phy_device *phydev) + { +- /* QCA8337 doesn't require DAC Amplitude adjustement */ +- if (phydev->drv->phy_id == QCA8337_PHY_ID) +- return; +- + /* Set DAC Amplitude adjustment to +6% for 100m on link running */ + if (phydev->state == PHY_RUNNING) { + if (phydev->speed == SPEED_100) +@@ -1686,19 +1685,6 @@ static int qca83xx_resume(struct phy_dev + + static int qca83xx_suspend(struct phy_device *phydev) + { +- u16 mask = 0; +- +- /* Only QCA8337 support actual suspend. +- * QCA8327 cause port unreliability when phy suspend +- * is set. +- */ +- if (phydev->drv->phy_id == QCA8337_PHY_ID) { +- genphy_suspend(phydev); +- } else { +- mask |= ~(BMCR_SPEED1000 | BMCR_FULLDPLX); +- phy_modify(phydev, MII_BMCR, mask, 0); +- } +- + at803x_debug_reg_mask(phydev, AT803X_DEBUG_REG_GREEN, + AT803X_DEBUG_GATE_CLK_IN1000, 0); + +@@ -1709,6 +1695,27 @@ static int qca83xx_suspend(struct phy_de + return 0; + } + ++static int qca8337_suspend(struct phy_device *phydev) ++{ ++ /* Only QCA8337 support actual suspend. */ ++ genphy_suspend(phydev); ++ ++ return qca83xx_suspend(phydev); ++} ++ ++static int qca8327_suspend(struct phy_device *phydev) ++{ ++ u16 mask = 0; ++ ++ /* QCA8327 cause port unreliability when phy suspend ++ * is set. ++ */ ++ mask |= ~(BMCR_SPEED1000 | BMCR_FULLDPLX); ++ phy_modify(phydev, MII_BMCR, mask, 0); ++ ++ return qca83xx_suspend(phydev); ++} ++ + static int qca808x_phy_fast_retrain_config(struct phy_device *phydev) + { + int ret; +@@ -2170,7 +2177,6 @@ static struct phy_driver at803x_driver[] + .phy_id_mask = QCA8K_PHY_ID_MASK, + .name = "Qualcomm Atheros 8337 internal PHY", + /* PHY_GBIT_FEATURES */ +- .link_change_notify = qca83xx_link_change_notify, + .probe = at803x_probe, + .flags = PHY_IS_INTERNAL, + .config_init = qca83xx_config_init, +@@ -2178,7 +2184,7 @@ static struct phy_driver at803x_driver[] + .get_sset_count = qca83xx_get_sset_count, + .get_strings = qca83xx_get_strings, + .get_stats = qca83xx_get_stats, +- .suspend = qca83xx_suspend, ++ .suspend = qca8337_suspend, + .resume = qca83xx_resume, + }, { + /* QCA8327-A from switch QCA8327-AL1A */ +@@ -2189,12 +2195,12 @@ static struct phy_driver at803x_driver[] + .link_change_notify = qca83xx_link_change_notify, + .probe = at803x_probe, + .flags = PHY_IS_INTERNAL, +- .config_init = qca83xx_config_init, ++ .config_init = qca8327_config_init, + .soft_reset = genphy_soft_reset, + .get_sset_count = qca83xx_get_sset_count, + .get_strings = qca83xx_get_strings, + .get_stats = qca83xx_get_stats, +- .suspend = qca83xx_suspend, ++ .suspend = qca8327_suspend, + .resume = qca83xx_resume, + }, { + /* QCA8327-B from switch QCA8327-BL1A */ +@@ -2205,12 +2211,12 @@ static struct phy_driver at803x_driver[] + .link_change_notify = qca83xx_link_change_notify, + .probe = at803x_probe, + .flags = PHY_IS_INTERNAL, +- .config_init = qca83xx_config_init, ++ .config_init = qca8327_config_init, + .soft_reset = genphy_soft_reset, + .get_sset_count = qca83xx_get_sset_count, + .get_strings = qca83xx_get_strings, + .get_stats = qca83xx_get_stats, +- .suspend = qca83xx_suspend, ++ .suspend = qca8327_suspend, + .resume = qca83xx_resume, + }, { + /* Qualcomm QCA8081 */ diff --git a/target/linux/generic/backport-6.1/707-v6.8-05-net-phy-at803x-move-specific-DT-option-for-at8031-to.patch b/target/linux/generic/backport-6.1/707-v6.8-05-net-phy-at803x-move-specific-DT-option-for-at8031-to.patch new file mode 100644 index 0000000000..a5cc67a8c8 --- /dev/null +++ b/target/linux/generic/backport-6.1/707-v6.8-05-net-phy-at803x-move-specific-DT-option-for-at8031-to.patch @@ -0,0 +1,94 @@ +From 900eef75cc5018e149c52fe305c9c3fe424c52a7 Mon Sep 17 00:00:00 2001 +From: Christian Marangi +Date: Fri, 8 Dec 2023 15:51:52 +0100 +Subject: [PATCH 05/13] net: phy: at803x: move specific DT option for at8031 to + specific probe + +Move specific DT options for at8031 to specific probe to tidy things up +and make at803x_parse_dt more generic. + +Signed-off-by: Christian Marangi +Reviewed-by: Andrew Lunn +Signed-off-by: David S. Miller +--- + drivers/net/phy/at803x.c | 55 ++++++++++++++++++++++------------------ + 1 file changed, 31 insertions(+), 24 deletions(-) + +--- a/drivers/net/phy/at803x.c ++++ b/drivers/net/phy/at803x.c +@@ -825,30 +825,6 @@ static int at803x_parse_dt(struct phy_de + } + } + +- /* Only supported on AR8031/AR8033, the AR8030/AR8035 use strapping +- * options. +- */ +- if (phydev->drv->phy_id == ATH8031_PHY_ID) { +- if (of_property_read_bool(node, "qca,keep-pll-enabled")) +- priv->flags |= AT803X_KEEP_PLL_ENABLED; +- +- ret = at8031_register_regulators(phydev); +- if (ret < 0) +- return ret; +- +- ret = devm_regulator_get_enable_optional(&phydev->mdio.dev, +- "vddio"); +- if (ret) { +- phydev_err(phydev, "failed to get VDDIO regulator\n"); +- return ret; +- } +- +- /* Only AR8031/8033 support 1000Base-X for SFP modules */ +- ret = phy_sfp_probe(phydev, &at803x_sfp_ops); +- if (ret < 0) +- return ret; +- } +- + return 0; + } + +@@ -1582,6 +1558,30 @@ static int at803x_cable_test_start(struc + return 0; + } + ++static int at8031_parse_dt(struct phy_device *phydev) ++{ ++ struct device_node *node = phydev->mdio.dev.of_node; ++ struct at803x_priv *priv = phydev->priv; ++ int ret; ++ ++ if (of_property_read_bool(node, "qca,keep-pll-enabled")) ++ priv->flags |= AT803X_KEEP_PLL_ENABLED; ++ ++ ret = at8031_register_regulators(phydev); ++ if (ret < 0) ++ return ret; ++ ++ ret = devm_regulator_get_enable_optional(&phydev->mdio.dev, ++ "vddio"); ++ if (ret) { ++ phydev_err(phydev, "failed to get VDDIO regulator\n"); ++ return ret; ++ } ++ ++ /* Only AR8031/8033 support 1000Base-X for SFP modules */ ++ return phy_sfp_probe(phydev, &at803x_sfp_ops); ++} ++ + static int at8031_probe(struct phy_device *phydev) + { + int ret; +@@ -1590,6 +1590,13 @@ static int at8031_probe(struct phy_devic + if (ret) + return ret; + ++ /* Only supported on AR8031/AR8033, the AR8030/AR8035 use strapping ++ * options. ++ */ ++ ret = at8031_parse_dt(phydev); ++ if (ret) ++ return ret; ++ + /* Disable WoL in 1588 register which is enabled + * by default + */ diff --git a/target/linux/generic/backport-6.1/707-v6.8-06-net-phy-at803x-move-specific-at8031-probe-mode-check.patch b/target/linux/generic/backport-6.1/707-v6.8-06-net-phy-at803x-move-specific-at8031-probe-mode-check.patch new file mode 100644 index 0000000000..9e10e000e5 --- /dev/null +++ b/target/linux/generic/backport-6.1/707-v6.8-06-net-phy-at803x-move-specific-at8031-probe-mode-check.patch @@ -0,0 +1,78 @@ +From 25d2ba94005fac18fe68878cddff59a67e115554 Mon Sep 17 00:00:00 2001 +From: Christian Marangi +Date: Fri, 8 Dec 2023 15:51:53 +0100 +Subject: [PATCH 06/13] net: phy: at803x: move specific at8031 probe mode check + to dedicated probe + +Move specific at8031 probe mode check to dedicated probe to make +at803x_probe more generic and keep code tidy. + +Signed-off-by: Christian Marangi +Reviewed-by: Andrew Lunn +Signed-off-by: David S. Miller +--- + drivers/net/phy/at803x.c | 39 +++++++++++++++++++-------------------- + 1 file changed, 19 insertions(+), 20 deletions(-) + +--- a/drivers/net/phy/at803x.c ++++ b/drivers/net/phy/at803x.c +@@ -844,26 +844,6 @@ static int at803x_probe(struct phy_devic + if (ret) + return ret; + +- if (phydev->drv->phy_id == ATH8031_PHY_ID) { +- int ccr = phy_read(phydev, AT803X_REG_CHIP_CONFIG); +- int mode_cfg; +- +- if (ccr < 0) +- return ccr; +- mode_cfg = ccr & AT803X_MODE_CFG_MASK; +- +- switch (mode_cfg) { +- case AT803X_MODE_CFG_BX1000_RGMII_50OHM: +- case AT803X_MODE_CFG_BX1000_RGMII_75OHM: +- priv->is_1000basex = true; +- fallthrough; +- case AT803X_MODE_CFG_FX100_RGMII_50OHM: +- case AT803X_MODE_CFG_FX100_RGMII_75OHM: +- priv->is_fiber = true; +- break; +- } +- } +- + return 0; + } + +@@ -1584,6 +1564,9 @@ static int at8031_parse_dt(struct phy_de + + static int at8031_probe(struct phy_device *phydev) + { ++ struct at803x_priv *priv = phydev->priv; ++ int mode_cfg; ++ int ccr; + int ret; + + ret = at803x_probe(phydev); +@@ -1597,6 +1580,22 @@ static int at8031_probe(struct phy_devic + if (ret) + return ret; + ++ ccr = phy_read(phydev, AT803X_REG_CHIP_CONFIG); ++ if (ccr < 0) ++ return ccr; ++ mode_cfg = ccr & AT803X_MODE_CFG_MASK; ++ ++ switch (mode_cfg) { ++ case AT803X_MODE_CFG_BX1000_RGMII_50OHM: ++ case AT803X_MODE_CFG_BX1000_RGMII_75OHM: ++ priv->is_1000basex = true; ++ fallthrough; ++ case AT803X_MODE_CFG_FX100_RGMII_50OHM: ++ case AT803X_MODE_CFG_FX100_RGMII_75OHM: ++ priv->is_fiber = true; ++ break; ++ } ++ + /* Disable WoL in 1588 register which is enabled + * by default + */ diff --git a/target/linux/generic/backport-6.1/707-v6.8-07-net-phy-at803x-move-specific-at8031-config_init-to-d.patch b/target/linux/generic/backport-6.1/707-v6.8-07-net-phy-at803x-move-specific-at8031-config_init-to-d.patch new file mode 100644 index 0000000000..c9ef6df827 --- /dev/null +++ b/target/linux/generic/backport-6.1/707-v6.8-07-net-phy-at803x-move-specific-at8031-config_init-to-d.patch @@ -0,0 +1,86 @@ +From 3ae3bc426eaf57ca8f53d75777d9a5ef779bc7b7 Mon Sep 17 00:00:00 2001 +From: Christian Marangi +Date: Fri, 8 Dec 2023 15:51:54 +0100 +Subject: [PATCH 07/13] net: phy: at803x: move specific at8031 config_init to + dedicated function + +Move specific at8031 config_init to dedicated function to make +at803x_config_init more generic and tidy things up. + +Signed-off-by: Christian Marangi +Reviewed-by: Andrew Lunn +Signed-off-by: David S. Miller +--- + drivers/net/phy/at803x.c | 45 ++++++++++++++++++++++------------------ + 1 file changed, 25 insertions(+), 20 deletions(-) + +--- a/drivers/net/phy/at803x.c ++++ b/drivers/net/phy/at803x.c +@@ -951,27 +951,8 @@ static int at803x_hibernation_mode_confi + + static int at803x_config_init(struct phy_device *phydev) + { +- struct at803x_priv *priv = phydev->priv; + int ret; + +- if (phydev->drv->phy_id == ATH8031_PHY_ID) { +- /* Some bootloaders leave the fiber page selected. +- * Switch to the appropriate page (fiber or copper), as otherwise we +- * read the PHY capabilities from the wrong page. +- */ +- phy_lock_mdio_bus(phydev); +- ret = at803x_write_page(phydev, +- priv->is_fiber ? AT803X_PAGE_FIBER : +- AT803X_PAGE_COPPER); +- phy_unlock_mdio_bus(phydev); +- if (ret) +- return ret; +- +- ret = at8031_pll_config(phydev); +- if (ret < 0) +- return ret; +- } +- + /* The RX and TX delay default is: + * after HW reset: RX delay enabled and TX delay disabled + * after SW reset: RX delay enabled, while TX delay retains the +@@ -1604,6 +1585,30 @@ static int at8031_probe(struct phy_devic + AT803X_WOL_EN, 0); + } + ++static int at8031_config_init(struct phy_device *phydev) ++{ ++ struct at803x_priv *priv = phydev->priv; ++ int ret; ++ ++ /* Some bootloaders leave the fiber page selected. ++ * Switch to the appropriate page (fiber or copper), as otherwise we ++ * read the PHY capabilities from the wrong page. ++ */ ++ phy_lock_mdio_bus(phydev); ++ ret = at803x_write_page(phydev, ++ priv->is_fiber ? AT803X_PAGE_FIBER : ++ AT803X_PAGE_COPPER); ++ phy_unlock_mdio_bus(phydev); ++ if (ret) ++ return ret; ++ ++ ret = at8031_pll_config(phydev); ++ if (ret < 0) ++ return ret; ++ ++ return at803x_config_init(phydev); ++} ++ + static int qca83xx_config_init(struct phy_device *phydev) + { + u8 switch_revision; +@@ -2113,7 +2118,7 @@ static struct phy_driver at803x_driver[] + .name = "Qualcomm Atheros AR8031/AR8033", + .flags = PHY_POLL_CABLE_TEST, + .probe = at8031_probe, +- .config_init = at803x_config_init, ++ .config_init = at8031_config_init, + .config_aneg = at803x_config_aneg, + .soft_reset = genphy_soft_reset, + .set_wol = at803x_set_wol, diff --git a/target/linux/generic/backport-6.1/707-v6.8-08-net-phy-at803x-move-specific-at8031-WOL-bits-to-dedi.patch b/target/linux/generic/backport-6.1/707-v6.8-08-net-phy-at803x-move-specific-at8031-WOL-bits-to-dedi.patch new file mode 100644 index 0000000000..6746a4d43c --- /dev/null +++ b/target/linux/generic/backport-6.1/707-v6.8-08-net-phy-at803x-move-specific-at8031-WOL-bits-to-dedi.patch @@ -0,0 +1,92 @@ +From 27b89c9dc1b0393090d68d651b82f30ad2696baa Mon Sep 17 00:00:00 2001 +From: Christian Marangi +Date: Fri, 8 Dec 2023 15:51:55 +0100 +Subject: [PATCH 08/13] net: phy: at803x: move specific at8031 WOL bits to + dedicated function + +Move specific at8031 WOL enable/disable to dedicated function to make +at803x_set_wol more generic. + +This is needed in preparation for PHY driver split as qca8081 share the +same function to toggle WOL settings. + +In this new implementation WOL module in at8031 is enabled after the +generic interrupt is setup. This should not cause any problem as the +WOL_INT has a separate implementation and only relay on MAC bits. + +Signed-off-by: Christian Marangi +Signed-off-by: David S. Miller +--- + drivers/net/phy/at803x.c | 42 ++++++++++++++++++++++++---------------- + 1 file changed, 25 insertions(+), 17 deletions(-) + +--- a/drivers/net/phy/at803x.c ++++ b/drivers/net/phy/at803x.c +@@ -466,27 +466,11 @@ static int at803x_set_wol(struct phy_dev + phy_write_mmd(phydev, MDIO_MMD_PCS, offsets[i], + mac[(i * 2) + 1] | (mac[(i * 2)] << 8)); + +- /* Enable WOL function for 1588 */ +- if (phydev->drv->phy_id == ATH8031_PHY_ID) { +- ret = phy_modify_mmd(phydev, MDIO_MMD_PCS, +- AT803X_PHY_MMD3_WOL_CTRL, +- 0, AT803X_WOL_EN); +- if (ret) +- return ret; +- } + /* Enable WOL interrupt */ + ret = phy_modify(phydev, AT803X_INTR_ENABLE, 0, AT803X_INTR_ENABLE_WOL); + if (ret) + return ret; + } else { +- /* Disable WoL function for 1588 */ +- if (phydev->drv->phy_id == ATH8031_PHY_ID) { +- ret = phy_modify_mmd(phydev, MDIO_MMD_PCS, +- AT803X_PHY_MMD3_WOL_CTRL, +- AT803X_WOL_EN, 0); +- if (ret) +- return ret; +- } + /* Disable WOL interrupt */ + ret = phy_modify(phydev, AT803X_INTR_ENABLE, AT803X_INTR_ENABLE_WOL, 0); + if (ret) +@@ -1609,6 +1593,30 @@ static int at8031_config_init(struct phy + return at803x_config_init(phydev); + } + ++static int at8031_set_wol(struct phy_device *phydev, ++ struct ethtool_wolinfo *wol) ++{ ++ int ret; ++ ++ /* First setup MAC address and enable WOL interrupt */ ++ ret = at803x_set_wol(phydev, wol); ++ if (ret) ++ return ret; ++ ++ if (wol->wolopts & WAKE_MAGIC) ++ /* Enable WOL function for 1588 */ ++ ret = phy_modify_mmd(phydev, MDIO_MMD_PCS, ++ AT803X_PHY_MMD3_WOL_CTRL, ++ 0, AT803X_WOL_EN); ++ else ++ /* Disable WoL function for 1588 */ ++ ret = phy_modify_mmd(phydev, MDIO_MMD_PCS, ++ AT803X_PHY_MMD3_WOL_CTRL, ++ AT803X_WOL_EN, 0); ++ ++ return ret; ++} ++ + static int qca83xx_config_init(struct phy_device *phydev) + { + u8 switch_revision; +@@ -2121,7 +2129,7 @@ static struct phy_driver at803x_driver[] + .config_init = at8031_config_init, + .config_aneg = at803x_config_aneg, + .soft_reset = genphy_soft_reset, +- .set_wol = at803x_set_wol, ++ .set_wol = at8031_set_wol, + .get_wol = at803x_get_wol, + .suspend = at803x_suspend, + .resume = at803x_resume, diff --git a/target/linux/generic/backport-6.1/707-v6.8-09-net-phy-at803x-move-specific-at8031-config_intr-to-d.patch b/target/linux/generic/backport-6.1/707-v6.8-09-net-phy-at803x-move-specific-at8031-config_intr-to-d.patch new file mode 100644 index 0000000000..0d284c3d24 --- /dev/null +++ b/target/linux/generic/backport-6.1/707-v6.8-09-net-phy-at803x-move-specific-at8031-config_intr-to-d.patch @@ -0,0 +1,78 @@ +From 30dd62191d3dd97c08f7f9dc9ce77ffab457e4fb Mon Sep 17 00:00:00 2001 +From: Christian Marangi +Date: Fri, 8 Dec 2023 15:51:56 +0100 +Subject: [PATCH 09/13] net: phy: at803x: move specific at8031 config_intr to + dedicated function + +Move specific at8031 config_intr bits to dedicated function to make +at803x_config_initr more generic. + +This is needed in preparation for PHY driver split as qca8081 share the +same function to setup interrupts. + +Signed-off-by: Christian Marangi +Signed-off-by: David S. Miller +--- + drivers/net/phy/at803x.c | 30 ++++++++++++++++++++++++------ + 1 file changed, 24 insertions(+), 6 deletions(-) + +--- a/drivers/net/phy/at803x.c ++++ b/drivers/net/phy/at803x.c +@@ -990,7 +990,6 @@ static int at803x_ack_interrupt(struct p + + static int at803x_config_intr(struct phy_device *phydev) + { +- struct at803x_priv *priv = phydev->priv; + int err; + int value; + +@@ -1007,10 +1006,6 @@ static int at803x_config_intr(struct phy + value |= AT803X_INTR_ENABLE_DUPLEX_CHANGED; + value |= AT803X_INTR_ENABLE_LINK_FAIL; + value |= AT803X_INTR_ENABLE_LINK_SUCCESS; +- if (priv->is_fiber) { +- value |= AT803X_INTR_ENABLE_LINK_FAIL_BX; +- value |= AT803X_INTR_ENABLE_LINK_SUCCESS_BX; +- } + + err = phy_write(phydev, AT803X_INTR_ENABLE, value); + } else { +@@ -1617,6 +1612,29 @@ static int at8031_set_wol(struct phy_dev + return ret; + } + ++static int at8031_config_intr(struct phy_device *phydev) ++{ ++ struct at803x_priv *priv = phydev->priv; ++ int err, value = 0; ++ ++ if (phydev->interrupts == PHY_INTERRUPT_ENABLED && ++ priv->is_fiber) { ++ /* Clear any pending interrupts */ ++ err = at803x_ack_interrupt(phydev); ++ if (err) ++ return err; ++ ++ value |= AT803X_INTR_ENABLE_LINK_FAIL_BX; ++ value |= AT803X_INTR_ENABLE_LINK_SUCCESS_BX; ++ ++ err = phy_set_bits(phydev, AT803X_INTR_ENABLE, value); ++ if (err) ++ return err; ++ } ++ ++ return at803x_config_intr(phydev); ++} ++ + static int qca83xx_config_init(struct phy_device *phydev) + { + u8 switch_revision; +@@ -2137,7 +2155,7 @@ static struct phy_driver at803x_driver[] + .write_page = at803x_write_page, + .get_features = at803x_get_features, + .read_status = at803x_read_status, +- .config_intr = at803x_config_intr, ++ .config_intr = at8031_config_intr, + .handle_interrupt = at803x_handle_interrupt, + .get_tunable = at803x_get_tunable, + .set_tunable = at803x_set_tunable, diff --git a/target/linux/generic/backport-6.1/707-v6.8-10-net-phy-at803x-make-at8031-related-DT-functions-name.patch b/target/linux/generic/backport-6.1/707-v6.8-10-net-phy-at803x-make-at8031-related-DT-functions-name.patch new file mode 100644 index 0000000000..210949ea81 --- /dev/null +++ b/target/linux/generic/backport-6.1/707-v6.8-10-net-phy-at803x-make-at8031-related-DT-functions-name.patch @@ -0,0 +1,78 @@ +From a5ab9d8e7ae0da8328ac1637a9755311508dc8ab Mon Sep 17 00:00:00 2001 +From: Christian Marangi +Date: Fri, 8 Dec 2023 15:51:57 +0100 +Subject: [PATCH 10/13] net: phy: at803x: make at8031 related DT functions name + more specific + +Rename at8031 related DT function name to a more specific name +referencing they are only related to at8031 and not to the generic +at803x PHY family. + +Signed-off-by: Christian Marangi +Signed-off-by: David S. Miller +--- + drivers/net/phy/at803x.c | 16 ++++++++-------- + 1 file changed, 8 insertions(+), 8 deletions(-) + +--- a/drivers/net/phy/at803x.c ++++ b/drivers/net/phy/at803x.c +@@ -583,7 +583,7 @@ static int at803x_resume(struct phy_devi + return phy_modify(phydev, MII_BMCR, BMCR_PDOWN | BMCR_ISOLATE, 0); + } + +-static int at803x_rgmii_reg_set_voltage_sel(struct regulator_dev *rdev, ++static int at8031_rgmii_reg_set_voltage_sel(struct regulator_dev *rdev, + unsigned int selector) + { + struct phy_device *phydev = rdev_get_drvdata(rdev); +@@ -596,7 +596,7 @@ static int at803x_rgmii_reg_set_voltage_ + AT803X_DEBUG_RGMII_1V8, 0); + } + +-static int at803x_rgmii_reg_get_voltage_sel(struct regulator_dev *rdev) ++static int at8031_rgmii_reg_get_voltage_sel(struct regulator_dev *rdev) + { + struct phy_device *phydev = rdev_get_drvdata(rdev); + int val; +@@ -610,8 +610,8 @@ static int at803x_rgmii_reg_get_voltage_ + + static const struct regulator_ops vddio_regulator_ops = { + .list_voltage = regulator_list_voltage_table, +- .set_voltage_sel = at803x_rgmii_reg_set_voltage_sel, +- .get_voltage_sel = at803x_rgmii_reg_get_voltage_sel, ++ .set_voltage_sel = at8031_rgmii_reg_set_voltage_sel, ++ .get_voltage_sel = at8031_rgmii_reg_get_voltage_sel, + }; + + static const unsigned int vddio_voltage_table[] = { +@@ -666,7 +666,7 @@ static int at8031_register_regulators(st + return 0; + } + +-static int at803x_sfp_insert(void *upstream, const struct sfp_eeprom_id *id) ++static int at8031_sfp_insert(void *upstream, const struct sfp_eeprom_id *id) + { + struct phy_device *phydev = upstream; + __ETHTOOL_DECLARE_LINK_MODE_MASK(phy_support); +@@ -710,10 +710,10 @@ static int at803x_sfp_insert(void *upstr + return 0; + } + +-static const struct sfp_upstream_ops at803x_sfp_ops = { ++static const struct sfp_upstream_ops at8031_sfp_ops = { + .attach = phy_sfp_attach, + .detach = phy_sfp_detach, +- .module_insert = at803x_sfp_insert, ++ .module_insert = at8031_sfp_insert, + }; + + static int at803x_parse_dt(struct phy_device *phydev) +@@ -1519,7 +1519,7 @@ static int at8031_parse_dt(struct phy_de + } + + /* Only AR8031/8033 support 1000Base-X for SFP modules */ +- return phy_sfp_probe(phydev, &at803x_sfp_ops); ++ return phy_sfp_probe(phydev, &at8031_sfp_ops); + } + + static int at8031_probe(struct phy_device *phydev) diff --git a/target/linux/generic/backport-6.1/707-v6.8-11-net-phy-at803x-move-at8031-functions-in-dedicated-se.patch b/target/linux/generic/backport-6.1/707-v6.8-11-net-phy-at803x-move-at8031-functions-in-dedicated-se.patch new file mode 100644 index 0000000000..5856b59751 --- /dev/null +++ b/target/linux/generic/backport-6.1/707-v6.8-11-net-phy-at803x-move-at8031-functions-in-dedicated-se.patch @@ -0,0 +1,297 @@ +From f932a6dc8bae0dae9645b5b1b4c65aed8a8acb2a Mon Sep 17 00:00:00 2001 +From: Christian Marangi +Date: Fri, 8 Dec 2023 15:51:58 +0100 +Subject: [PATCH 11/13] net: phy: at803x: move at8031 functions in dedicated + section + +Move at8031 functions in dedicated section with dedicated at8031 +parse_dt and probe. + +Signed-off-by: Christian Marangi +Signed-off-by: David S. Miller +--- + drivers/net/phy/at803x.c | 266 +++++++++++++++++++-------------------- + 1 file changed, 133 insertions(+), 133 deletions(-) + +--- a/drivers/net/phy/at803x.c ++++ b/drivers/net/phy/at803x.c +@@ -583,139 +583,6 @@ static int at803x_resume(struct phy_devi + return phy_modify(phydev, MII_BMCR, BMCR_PDOWN | BMCR_ISOLATE, 0); + } + +-static int at8031_rgmii_reg_set_voltage_sel(struct regulator_dev *rdev, +- unsigned int selector) +-{ +- struct phy_device *phydev = rdev_get_drvdata(rdev); +- +- if (selector) +- return at803x_debug_reg_mask(phydev, AT803X_DEBUG_REG_1F, +- 0, AT803X_DEBUG_RGMII_1V8); +- else +- return at803x_debug_reg_mask(phydev, AT803X_DEBUG_REG_1F, +- AT803X_DEBUG_RGMII_1V8, 0); +-} +- +-static int at8031_rgmii_reg_get_voltage_sel(struct regulator_dev *rdev) +-{ +- struct phy_device *phydev = rdev_get_drvdata(rdev); +- int val; +- +- val = at803x_debug_reg_read(phydev, AT803X_DEBUG_REG_1F); +- if (val < 0) +- return val; +- +- return (val & AT803X_DEBUG_RGMII_1V8) ? 1 : 0; +-} +- +-static const struct regulator_ops vddio_regulator_ops = { +- .list_voltage = regulator_list_voltage_table, +- .set_voltage_sel = at8031_rgmii_reg_set_voltage_sel, +- .get_voltage_sel = at8031_rgmii_reg_get_voltage_sel, +-}; +- +-static const unsigned int vddio_voltage_table[] = { +- 1500000, +- 1800000, +-}; +- +-static const struct regulator_desc vddio_desc = { +- .name = "vddio", +- .of_match = of_match_ptr("vddio-regulator"), +- .n_voltages = ARRAY_SIZE(vddio_voltage_table), +- .volt_table = vddio_voltage_table, +- .ops = &vddio_regulator_ops, +- .type = REGULATOR_VOLTAGE, +- .owner = THIS_MODULE, +-}; +- +-static const struct regulator_ops vddh_regulator_ops = { +-}; +- +-static const struct regulator_desc vddh_desc = { +- .name = "vddh", +- .of_match = of_match_ptr("vddh-regulator"), +- .n_voltages = 1, +- .fixed_uV = 2500000, +- .ops = &vddh_regulator_ops, +- .type = REGULATOR_VOLTAGE, +- .owner = THIS_MODULE, +-}; +- +-static int at8031_register_regulators(struct phy_device *phydev) +-{ +- struct at803x_priv *priv = phydev->priv; +- struct device *dev = &phydev->mdio.dev; +- struct regulator_config config = { }; +- +- config.dev = dev; +- config.driver_data = phydev; +- +- priv->vddio_rdev = devm_regulator_register(dev, &vddio_desc, &config); +- if (IS_ERR(priv->vddio_rdev)) { +- phydev_err(phydev, "failed to register VDDIO regulator\n"); +- return PTR_ERR(priv->vddio_rdev); +- } +- +- priv->vddh_rdev = devm_regulator_register(dev, &vddh_desc, &config); +- if (IS_ERR(priv->vddh_rdev)) { +- phydev_err(phydev, "failed to register VDDH regulator\n"); +- return PTR_ERR(priv->vddh_rdev); +- } +- +- return 0; +-} +- +-static int at8031_sfp_insert(void *upstream, const struct sfp_eeprom_id *id) +-{ +- struct phy_device *phydev = upstream; +- __ETHTOOL_DECLARE_LINK_MODE_MASK(phy_support); +- __ETHTOOL_DECLARE_LINK_MODE_MASK(sfp_support); +- DECLARE_PHY_INTERFACE_MASK(interfaces); +- phy_interface_t iface; +- +- linkmode_zero(phy_support); +- phylink_set(phy_support, 1000baseX_Full); +- phylink_set(phy_support, 1000baseT_Full); +- phylink_set(phy_support, Autoneg); +- phylink_set(phy_support, Pause); +- phylink_set(phy_support, Asym_Pause); +- +- linkmode_zero(sfp_support); +- sfp_parse_support(phydev->sfp_bus, id, sfp_support, interfaces); +- /* Some modules support 10G modes as well as others we support. +- * Mask out non-supported modes so the correct interface is picked. +- */ +- linkmode_and(sfp_support, phy_support, sfp_support); +- +- if (linkmode_empty(sfp_support)) { +- dev_err(&phydev->mdio.dev, "incompatible SFP module inserted\n"); +- return -EINVAL; +- } +- +- iface = sfp_select_interface(phydev->sfp_bus, sfp_support); +- +- /* Only 1000Base-X is supported by AR8031/8033 as the downstream SerDes +- * interface for use with SFP modules. +- * However, some copper modules detected as having a preferred SGMII +- * interface do default to and function in 1000Base-X mode, so just +- * print a warning and allow such modules, as they may have some chance +- * of working. +- */ +- if (iface == PHY_INTERFACE_MODE_SGMII) +- dev_warn(&phydev->mdio.dev, "module may not function if 1000Base-X not supported\n"); +- else if (iface != PHY_INTERFACE_MODE_1000BASEX) +- return -EINVAL; +- +- return 0; +-} +- +-static const struct sfp_upstream_ops at8031_sfp_ops = { +- .attach = phy_sfp_attach, +- .detach = phy_sfp_detach, +- .module_insert = at8031_sfp_insert, +-}; +- + static int at803x_parse_dt(struct phy_device *phydev) + { + struct device_node *node = phydev->mdio.dev.of_node; +@@ -1498,6 +1365,139 @@ static int at803x_cable_test_start(struc + return 0; + } + ++static int at8031_rgmii_reg_set_voltage_sel(struct regulator_dev *rdev, ++ unsigned int selector) ++{ ++ struct phy_device *phydev = rdev_get_drvdata(rdev); ++ ++ if (selector) ++ return at803x_debug_reg_mask(phydev, AT803X_DEBUG_REG_1F, ++ 0, AT803X_DEBUG_RGMII_1V8); ++ else ++ return at803x_debug_reg_mask(phydev, AT803X_DEBUG_REG_1F, ++ AT803X_DEBUG_RGMII_1V8, 0); ++} ++ ++static int at8031_rgmii_reg_get_voltage_sel(struct regulator_dev *rdev) ++{ ++ struct phy_device *phydev = rdev_get_drvdata(rdev); ++ int val; ++ ++ val = at803x_debug_reg_read(phydev, AT803X_DEBUG_REG_1F); ++ if (val < 0) ++ return val; ++ ++ return (val & AT803X_DEBUG_RGMII_1V8) ? 1 : 0; ++} ++ ++static const struct regulator_ops vddio_regulator_ops = { ++ .list_voltage = regulator_list_voltage_table, ++ .set_voltage_sel = at8031_rgmii_reg_set_voltage_sel, ++ .get_voltage_sel = at8031_rgmii_reg_get_voltage_sel, ++}; ++ ++static const unsigned int vddio_voltage_table[] = { ++ 1500000, ++ 1800000, ++}; ++ ++static const struct regulator_desc vddio_desc = { ++ .name = "vddio", ++ .of_match = of_match_ptr("vddio-regulator"), ++ .n_voltages = ARRAY_SIZE(vddio_voltage_table), ++ .volt_table = vddio_voltage_table, ++ .ops = &vddio_regulator_ops, ++ .type = REGULATOR_VOLTAGE, ++ .owner = THIS_MODULE, ++}; ++ ++static const struct regulator_ops vddh_regulator_ops = { ++}; ++ ++static const struct regulator_desc vddh_desc = { ++ .name = "vddh", ++ .of_match = of_match_ptr("vddh-regulator"), ++ .n_voltages = 1, ++ .fixed_uV = 2500000, ++ .ops = &vddh_regulator_ops, ++ .type = REGULATOR_VOLTAGE, ++ .owner = THIS_MODULE, ++}; ++ ++static int at8031_register_regulators(struct phy_device *phydev) ++{ ++ struct at803x_priv *priv = phydev->priv; ++ struct device *dev = &phydev->mdio.dev; ++ struct regulator_config config = { }; ++ ++ config.dev = dev; ++ config.driver_data = phydev; ++ ++ priv->vddio_rdev = devm_regulator_register(dev, &vddio_desc, &config); ++ if (IS_ERR(priv->vddio_rdev)) { ++ phydev_err(phydev, "failed to register VDDIO regulator\n"); ++ return PTR_ERR(priv->vddio_rdev); ++ } ++ ++ priv->vddh_rdev = devm_regulator_register(dev, &vddh_desc, &config); ++ if (IS_ERR(priv->vddh_rdev)) { ++ phydev_err(phydev, "failed to register VDDH regulator\n"); ++ return PTR_ERR(priv->vddh_rdev); ++ } ++ ++ return 0; ++} ++ ++static int at8031_sfp_insert(void *upstream, const struct sfp_eeprom_id *id) ++{ ++ struct phy_device *phydev = upstream; ++ __ETHTOOL_DECLARE_LINK_MODE_MASK(phy_support); ++ __ETHTOOL_DECLARE_LINK_MODE_MASK(sfp_support); ++ DECLARE_PHY_INTERFACE_MASK(interfaces); ++ phy_interface_t iface; ++ ++ linkmode_zero(phy_support); ++ phylink_set(phy_support, 1000baseX_Full); ++ phylink_set(phy_support, 1000baseT_Full); ++ phylink_set(phy_support, Autoneg); ++ phylink_set(phy_support, Pause); ++ phylink_set(phy_support, Asym_Pause); ++ ++ linkmode_zero(sfp_support); ++ sfp_parse_support(phydev->sfp_bus, id, sfp_support, interfaces); ++ /* Some modules support 10G modes as well as others we support. ++ * Mask out non-supported modes so the correct interface is picked. ++ */ ++ linkmode_and(sfp_support, phy_support, sfp_support); ++ ++ if (linkmode_empty(sfp_support)) { ++ dev_err(&phydev->mdio.dev, "incompatible SFP module inserted\n"); ++ return -EINVAL; ++ } ++ ++ iface = sfp_select_interface(phydev->sfp_bus, sfp_support); ++ ++ /* Only 1000Base-X is supported by AR8031/8033 as the downstream SerDes ++ * interface for use with SFP modules. ++ * However, some copper modules detected as having a preferred SGMII ++ * interface do default to and function in 1000Base-X mode, so just ++ * print a warning and allow such modules, as they may have some chance ++ * of working. ++ */ ++ if (iface == PHY_INTERFACE_MODE_SGMII) ++ dev_warn(&phydev->mdio.dev, "module may not function if 1000Base-X not supported\n"); ++ else if (iface != PHY_INTERFACE_MODE_1000BASEX) ++ return -EINVAL; ++ ++ return 0; ++} ++ ++static const struct sfp_upstream_ops at8031_sfp_ops = { ++ .attach = phy_sfp_attach, ++ .detach = phy_sfp_detach, ++ .module_insert = at8031_sfp_insert, ++}; ++ + static int at8031_parse_dt(struct phy_device *phydev) + { + struct device_node *node = phydev->mdio.dev.of_node; diff --git a/target/linux/generic/backport-6.1/707-v6.8-12-net-phy-at803x-move-at8035-specific-DT-parse-to-dedi.patch b/target/linux/generic/backport-6.1/707-v6.8-12-net-phy-at803x-move-at8035-specific-DT-parse-to-dedi.patch new file mode 100644 index 0000000000..0a822c6d37 --- /dev/null +++ b/target/linux/generic/backport-6.1/707-v6.8-12-net-phy-at803x-move-at8035-specific-DT-parse-to-dedi.patch @@ -0,0 +1,114 @@ +From 21a2802a8365cfa82cc02187c1f95136d85592ad Mon Sep 17 00:00:00 2001 +From: Christian Marangi +Date: Fri, 8 Dec 2023 15:51:59 +0100 +Subject: [PATCH 12/13] net: phy: at803x: move at8035 specific DT parse to + dedicated probe + +Move at8035 specific DT parse for clock out frequency to dedicated probe +to make at803x probe function more generic. + +This is to tidy code and no behaviour change are intended. + +Detection logic is changed, we check if the clk 25m mask is set and if +it's not zero, we assume the qca,clk-out-frequency property is set. + +The property is checked in the generic at803x_parse_dt called by +at803x_probe. + +Signed-off-by: Christian Marangi +Reviewed-by: Andrew Lunn +Signed-off-by: David S. Miller +--- + drivers/net/phy/at803x.c | 60 +++++++++++++++++++++++++++------------- + 1 file changed, 41 insertions(+), 19 deletions(-) + +--- a/drivers/net/phy/at803x.c ++++ b/drivers/net/phy/at803x.c +@@ -638,23 +638,6 @@ static int at803x_parse_dt(struct phy_de + + priv->clk_25m_reg |= FIELD_PREP(AT803X_CLK_OUT_MASK, sel); + priv->clk_25m_mask |= AT803X_CLK_OUT_MASK; +- +- /* Fixup for the AR8030/AR8035. This chip has another mask and +- * doesn't support the DSP reference. Eg. the lowest bit of the +- * mask. The upper two bits select the same frequencies. Mask +- * the lowest bit here. +- * +- * Warning: +- * There was no datasheet for the AR8030 available so this is +- * just a guess. But the AR8035 is listed as pin compatible +- * to the AR8030 so there might be a good chance it works on +- * the AR8030 too. +- */ +- if (phydev->drv->phy_id == ATH8030_PHY_ID || +- phydev->drv->phy_id == ATH8035_PHY_ID) { +- priv->clk_25m_reg &= AT8035_CLK_OUT_MASK; +- priv->clk_25m_mask &= AT8035_CLK_OUT_MASK; +- } + } + + ret = of_property_read_u32(node, "qca,clk-out-strength", &strength); +@@ -1635,6 +1618,45 @@ static int at8031_config_intr(struct phy + return at803x_config_intr(phydev); + } + ++static int at8035_parse_dt(struct phy_device *phydev) ++{ ++ struct at803x_priv *priv = phydev->priv; ++ ++ /* Mask is set by the generic at803x_parse_dt ++ * if property is set. Assume property is set ++ * with the mask not zero. ++ */ ++ if (priv->clk_25m_mask) { ++ /* Fixup for the AR8030/AR8035. This chip has another mask and ++ * doesn't support the DSP reference. Eg. the lowest bit of the ++ * mask. The upper two bits select the same frequencies. Mask ++ * the lowest bit here. ++ * ++ * Warning: ++ * There was no datasheet for the AR8030 available so this is ++ * just a guess. But the AR8035 is listed as pin compatible ++ * to the AR8030 so there might be a good chance it works on ++ * the AR8030 too. ++ */ ++ priv->clk_25m_reg &= AT8035_CLK_OUT_MASK; ++ priv->clk_25m_mask &= AT8035_CLK_OUT_MASK; ++ } ++ ++ return 0; ++} ++ ++/* AR8030 and AR8035 shared the same special mask for clk_25m */ ++static int at8035_probe(struct phy_device *phydev) ++{ ++ int ret; ++ ++ ret = at803x_probe(phydev); ++ if (ret) ++ return ret; ++ ++ return at8035_parse_dt(phydev); ++} ++ + static int qca83xx_config_init(struct phy_device *phydev) + { + u8 switch_revision; +@@ -2107,7 +2129,7 @@ static struct phy_driver at803x_driver[] + PHY_ID_MATCH_EXACT(ATH8035_PHY_ID), + .name = "Qualcomm Atheros AR8035", + .flags = PHY_POLL_CABLE_TEST, +- .probe = at803x_probe, ++ .probe = at8035_probe, + .config_aneg = at803x_config_aneg, + .config_init = at803x_config_init, + .soft_reset = genphy_soft_reset, +@@ -2128,7 +2150,7 @@ static struct phy_driver at803x_driver[] + .phy_id = ATH8030_PHY_ID, + .name = "Qualcomm Atheros AR8030", + .phy_id_mask = AT8030_PHY_ID_MASK, +- .probe = at803x_probe, ++ .probe = at8035_probe, + .config_init = at803x_config_init, + .link_change_notify = at803x_link_change_notify, + .set_wol = at803x_set_wol, diff --git a/target/linux/generic/backport-6.1/707-v6.8-13-net-phy-at803x-drop-specific-PHY-ID-check-from-cable.patch b/target/linux/generic/backport-6.1/707-v6.8-13-net-phy-at803x-drop-specific-PHY-ID-check-from-cable.patch new file mode 100644 index 0000000000..e1ba6ec2d0 --- /dev/null +++ b/target/linux/generic/backport-6.1/707-v6.8-13-net-phy-at803x-drop-specific-PHY-ID-check-from-cable.patch @@ -0,0 +1,219 @@ +From ef9df47b449e32e06501a11272809be49019bdb6 Mon Sep 17 00:00:00 2001 +From: Christian Marangi +Date: Fri, 8 Dec 2023 15:52:00 +0100 +Subject: [PATCH 13/13] net: phy: at803x: drop specific PHY ID check from cable + test functions + +Drop specific PHY ID check for cable test functions for at803x. This is +done to make functions more generic. While at it better describe what +the functions does by using more symbolic function names. + +PHYs that requires to set additional reg are moved to specific function +calling the more generic one. + +cdt_start and cdt_wait_for_completion are changed to take an additional +arg to pass specific values specific to the PHY. + +Signed-off-by: Christian Marangi +Signed-off-by: David S. Miller +--- + drivers/net/phy/at803x.c | 95 +++++++++++++++++++++------------------- + 1 file changed, 50 insertions(+), 45 deletions(-) + +--- a/drivers/net/phy/at803x.c ++++ b/drivers/net/phy/at803x.c +@@ -1222,31 +1222,16 @@ static int at803x_cdt_fault_length(u16 s + return (dt * 824) / 10; + } + +-static int at803x_cdt_start(struct phy_device *phydev, int pair) ++static int at803x_cdt_start(struct phy_device *phydev, ++ u32 cdt_start) + { +- u16 cdt; +- +- /* qca8081 takes the different bit 15 to enable CDT test */ +- if (phydev->drv->phy_id == QCA8081_PHY_ID) +- cdt = QCA808X_CDT_ENABLE_TEST | +- QCA808X_CDT_LENGTH_UNIT | +- QCA808X_CDT_INTER_CHECK_DIS; +- else +- cdt = FIELD_PREP(AT803X_CDT_MDI_PAIR_MASK, pair) | +- AT803X_CDT_ENABLE_TEST; +- +- return phy_write(phydev, AT803X_CDT, cdt); ++ return phy_write(phydev, AT803X_CDT, cdt_start); + } + +-static int at803x_cdt_wait_for_completion(struct phy_device *phydev) ++static int at803x_cdt_wait_for_completion(struct phy_device *phydev, ++ u32 cdt_en) + { + int val, ret; +- u16 cdt_en; +- +- if (phydev->drv->phy_id == QCA8081_PHY_ID) +- cdt_en = QCA808X_CDT_ENABLE_TEST; +- else +- cdt_en = AT803X_CDT_ENABLE_TEST; + + /* One test run takes about 25ms */ + ret = phy_read_poll_timeout(phydev, AT803X_CDT, val, +@@ -1266,11 +1251,13 @@ static int at803x_cable_test_one_pair(st + }; + int ret, val; + +- ret = at803x_cdt_start(phydev, pair); ++ val = FIELD_PREP(AT803X_CDT_MDI_PAIR_MASK, pair) | ++ AT803X_CDT_ENABLE_TEST; ++ ret = at803x_cdt_start(phydev, val); + if (ret) + return ret; + +- ret = at803x_cdt_wait_for_completion(phydev); ++ ret = at803x_cdt_wait_for_completion(phydev, AT803X_CDT_ENABLE_TEST); + if (ret) + return ret; + +@@ -1292,19 +1279,11 @@ static int at803x_cable_test_one_pair(st + } + + static int at803x_cable_test_get_status(struct phy_device *phydev, +- bool *finished) ++ bool *finished, unsigned long pair_mask) + { +- unsigned long pair_mask; + int retries = 20; + int pair, ret; + +- if (phydev->phy_id == ATH9331_PHY_ID || +- phydev->phy_id == ATH8032_PHY_ID || +- phydev->phy_id == QCA9561_PHY_ID) +- pair_mask = 0x3; +- else +- pair_mask = 0xf; +- + *finished = false; + + /* According to the datasheet the CDT can be performed when +@@ -1331,7 +1310,7 @@ static int at803x_cable_test_get_status( + return 0; + } + +-static int at803x_cable_test_start(struct phy_device *phydev) ++static void at803x_cable_test_autoneg(struct phy_device *phydev) + { + /* Enable auto-negotiation, but advertise no capabilities, no link + * will be established. A restart of the auto-negotiation is not +@@ -1339,11 +1318,11 @@ static int at803x_cable_test_start(struc + */ + phy_write(phydev, MII_BMCR, BMCR_ANENABLE); + phy_write(phydev, MII_ADVERTISE, ADVERTISE_CSMA); +- if (phydev->phy_id != ATH9331_PHY_ID && +- phydev->phy_id != ATH8032_PHY_ID && +- phydev->phy_id != QCA9561_PHY_ID) +- phy_write(phydev, MII_CTRL1000, 0); ++} + ++static int at803x_cable_test_start(struct phy_device *phydev) ++{ ++ at803x_cable_test_autoneg(phydev); + /* we do all the (time consuming) work later */ + return 0; + } +@@ -1618,6 +1597,29 @@ static int at8031_config_intr(struct phy + return at803x_config_intr(phydev); + } + ++/* AR8031 and AR8035 share the same cable test get status reg */ ++static int at8031_cable_test_get_status(struct phy_device *phydev, ++ bool *finished) ++{ ++ return at803x_cable_test_get_status(phydev, finished, 0xf); ++} ++ ++/* AR8031 and AR8035 share the same cable test start logic */ ++static int at8031_cable_test_start(struct phy_device *phydev) ++{ ++ at803x_cable_test_autoneg(phydev); ++ phy_write(phydev, MII_CTRL1000, 0); ++ /* we do all the (time consuming) work later */ ++ return 0; ++} ++ ++/* AR8032, AR9331 and QCA9561 share the same cable test get status reg */ ++static int at8032_cable_test_get_status(struct phy_device *phydev, ++ bool *finished) ++{ ++ return at803x_cable_test_get_status(phydev, finished, 0x3); ++} ++ + static int at8035_parse_dt(struct phy_device *phydev) + { + struct at803x_priv *priv = phydev->priv; +@@ -2041,11 +2043,14 @@ static int qca808x_cable_test_get_status + + *finished = false; + +- ret = at803x_cdt_start(phydev, 0); ++ val = QCA808X_CDT_ENABLE_TEST | ++ QCA808X_CDT_LENGTH_UNIT | ++ QCA808X_CDT_INTER_CHECK_DIS; ++ ret = at803x_cdt_start(phydev, val); + if (ret) + return ret; + +- ret = at803x_cdt_wait_for_completion(phydev); ++ ret = at803x_cdt_wait_for_completion(phydev, QCA808X_CDT_ENABLE_TEST); + if (ret) + return ret; + +@@ -2143,8 +2148,8 @@ static struct phy_driver at803x_driver[] + .handle_interrupt = at803x_handle_interrupt, + .get_tunable = at803x_get_tunable, + .set_tunable = at803x_set_tunable, +- .cable_test_start = at803x_cable_test_start, +- .cable_test_get_status = at803x_cable_test_get_status, ++ .cable_test_start = at8031_cable_test_start, ++ .cable_test_get_status = at8031_cable_test_get_status, + }, { + /* Qualcomm Atheros AR8030 */ + .phy_id = ATH8030_PHY_ID, +@@ -2181,8 +2186,8 @@ static struct phy_driver at803x_driver[] + .handle_interrupt = at803x_handle_interrupt, + .get_tunable = at803x_get_tunable, + .set_tunable = at803x_set_tunable, +- .cable_test_start = at803x_cable_test_start, +- .cable_test_get_status = at803x_cable_test_get_status, ++ .cable_test_start = at8031_cable_test_start, ++ .cable_test_get_status = at8031_cable_test_get_status, + }, { + /* Qualcomm Atheros AR8032 */ + PHY_ID_MATCH_EXACT(ATH8032_PHY_ID), +@@ -2197,7 +2202,7 @@ static struct phy_driver at803x_driver[] + .config_intr = at803x_config_intr, + .handle_interrupt = at803x_handle_interrupt, + .cable_test_start = at803x_cable_test_start, +- .cable_test_get_status = at803x_cable_test_get_status, ++ .cable_test_get_status = at8032_cable_test_get_status, + }, { + /* ATHEROS AR9331 */ + PHY_ID_MATCH_EXACT(ATH9331_PHY_ID), +@@ -2210,7 +2215,7 @@ static struct phy_driver at803x_driver[] + .config_intr = at803x_config_intr, + .handle_interrupt = at803x_handle_interrupt, + .cable_test_start = at803x_cable_test_start, +- .cable_test_get_status = at803x_cable_test_get_status, ++ .cable_test_get_status = at8032_cable_test_get_status, + .read_status = at803x_read_status, + .soft_reset = genphy_soft_reset, + .config_aneg = at803x_config_aneg, +@@ -2226,7 +2231,7 @@ static struct phy_driver at803x_driver[] + .config_intr = at803x_config_intr, + .handle_interrupt = at803x_handle_interrupt, + .cable_test_start = at803x_cable_test_start, +- .cable_test_get_status = at803x_cable_test_get_status, ++ .cable_test_get_status = at8032_cable_test_get_status, + .read_status = at803x_read_status, + .soft_reset = genphy_soft_reset, + .config_aneg = at803x_config_aneg, diff --git a/target/linux/generic/backport-6.1/708-v6.8-01-net-phy-at803x-move-specific-qca808x-config_aneg-to-.patch b/target/linux/generic/backport-6.1/708-v6.8-01-net-phy-at803x-move-specific-qca808x-config_aneg-to-.patch new file mode 100644 index 0000000000..0bb3673c02 --- /dev/null +++ b/target/linux/generic/backport-6.1/708-v6.8-01-net-phy-at803x-move-specific-qca808x-config_aneg-to-.patch @@ -0,0 +1,116 @@ +From 8e732f1c6f2dc5e18f766d0f1b11df9db2dd044a Mon Sep 17 00:00:00 2001 +From: Christian Marangi +Date: Thu, 14 Dec 2023 01:44:31 +0100 +Subject: [PATCH 1/2] net: phy: at803x: move specific qca808x config_aneg to + dedicated function + +Move specific qca808x config_aneg to dedicated function to permit easier +split of qca808x portion from at803x driver. + +Signed-off-by: Christian Marangi +Signed-off-by: David S. Miller +--- + drivers/net/phy/at803x.c | 66 ++++++++++++++++++++++++---------------- + 1 file changed, 40 insertions(+), 26 deletions(-) + +--- a/drivers/net/phy/at803x.c ++++ b/drivers/net/phy/at803x.c +@@ -1045,9 +1045,8 @@ static int at803x_config_mdix(struct phy + FIELD_PREP(AT803X_SFC_MDI_CROSSOVER_MODE_M, val)); + } + +-static int at803x_config_aneg(struct phy_device *phydev) ++static int at803x_prepare_config_aneg(struct phy_device *phydev) + { +- struct at803x_priv *priv = phydev->priv; + int ret; + + ret = at803x_config_mdix(phydev, phydev->mdix_ctrl); +@@ -1064,33 +1063,22 @@ static int at803x_config_aneg(struct phy + return ret; + } + +- if (priv->is_1000basex) +- return genphy_c37_config_aneg(phydev); +- +- /* Do not restart auto-negotiation by setting ret to 0 defautly, +- * when calling __genphy_config_aneg later. +- */ +- ret = 0; +- +- if (phydev->drv->phy_id == QCA8081_PHY_ID) { +- int phy_ctrl = 0; ++ return 0; ++} + +- /* The reg MII_BMCR also needs to be configured for force mode, the +- * genphy_config_aneg is also needed. +- */ +- if (phydev->autoneg == AUTONEG_DISABLE) +- genphy_c45_pma_setup_forced(phydev); ++static int at803x_config_aneg(struct phy_device *phydev) ++{ ++ struct at803x_priv *priv = phydev->priv; ++ int ret; + +- if (linkmode_test_bit(ETHTOOL_LINK_MODE_2500baseT_Full_BIT, phydev->advertising)) +- phy_ctrl = MDIO_AN_10GBT_CTRL_ADV2_5G; ++ ret = at803x_prepare_config_aneg(phydev); ++ if (ret) ++ return ret; + +- ret = phy_modify_mmd_changed(phydev, MDIO_MMD_AN, MDIO_AN_10GBT_CTRL, +- MDIO_AN_10GBT_CTRL_ADV2_5G, phy_ctrl); +- if (ret < 0) +- return ret; +- } ++ if (priv->is_1000basex) ++ return genphy_c37_config_aneg(phydev); + +- return __genphy_config_aneg(phydev, ret); ++ return genphy_config_aneg(phydev); + } + + static int at803x_get_downshift(struct phy_device *phydev, u8 *d) +@@ -2118,6 +2106,32 @@ static int qca808x_get_features(struct p + return 0; + } + ++static int qca808x_config_aneg(struct phy_device *phydev) ++{ ++ int phy_ctrl = 0; ++ int ret; ++ ++ ret = at803x_prepare_config_aneg(phydev); ++ if (ret) ++ return ret; ++ ++ /* The reg MII_BMCR also needs to be configured for force mode, the ++ * genphy_config_aneg is also needed. ++ */ ++ if (phydev->autoneg == AUTONEG_DISABLE) ++ genphy_c45_pma_setup_forced(phydev); ++ ++ if (linkmode_test_bit(ETHTOOL_LINK_MODE_2500baseT_Full_BIT, phydev->advertising)) ++ phy_ctrl = MDIO_AN_10GBT_CTRL_ADV2_5G; ++ ++ ret = phy_modify_mmd_changed(phydev, MDIO_MMD_AN, MDIO_AN_10GBT_CTRL, ++ MDIO_AN_10GBT_CTRL_ADV2_5G, phy_ctrl); ++ if (ret < 0) ++ return ret; ++ ++ return __genphy_config_aneg(phydev, ret); ++} ++ + static void qca808x_link_change_notify(struct phy_device *phydev) + { + /* Assert interface sgmii fifo on link down, deassert it on link up, +@@ -2295,7 +2309,7 @@ static struct phy_driver at803x_driver[] + .set_wol = at803x_set_wol, + .get_wol = at803x_get_wol, + .get_features = qca808x_get_features, +- .config_aneg = at803x_config_aneg, ++ .config_aneg = qca808x_config_aneg, + .suspend = genphy_suspend, + .resume = genphy_resume, + .read_status = qca808x_read_status, diff --git a/target/linux/generic/backport-6.1/708-v6.8-02-net-phy-at803x-make-read-specific-status-function-mo.patch b/target/linux/generic/backport-6.1/708-v6.8-02-net-phy-at803x-make-read-specific-status-function-mo.patch new file mode 100644 index 0000000000..54ca3bdfc8 --- /dev/null +++ b/target/linux/generic/backport-6.1/708-v6.8-02-net-phy-at803x-make-read-specific-status-function-mo.patch @@ -0,0 +1,97 @@ +From 38eb804e8458ba181a03a0498ce4bf84eebd1931 Mon Sep 17 00:00:00 2001 +From: Christian Marangi +Date: Thu, 14 Dec 2023 01:44:32 +0100 +Subject: [PATCH 2/2] net: phy: at803x: make read specific status function more + generic + +Rework read specific status function to be more generic. The function +apply different speed mask based on the PHY ID. Make it more generic by +adding an additional arg to pass the specific speed (ss) mask and use +the provided mask to parse the speed value. + +This is needed to permit an easier deatch of qca808x code from the +at803x driver. + +Signed-off-by: Christian Marangi +Signed-off-by: David S. Miller +--- + drivers/net/phy/at803x.c | 26 ++++++++++++++++++-------- + 1 file changed, 18 insertions(+), 8 deletions(-) + +--- a/drivers/net/phy/at803x.c ++++ b/drivers/net/phy/at803x.c +@@ -301,6 +301,11 @@ static struct at803x_hw_stat qca83xx_hw_ + { "eee_wake_errors", 0x16, GENMASK(15, 0), MMD}, + }; + ++struct at803x_ss_mask { ++ u16 speed_mask; ++ u8 speed_shift; ++}; ++ + struct at803x_priv { + int flags; + u16 clk_25m_reg; +@@ -921,7 +926,8 @@ static void at803x_link_change_notify(st + } + } + +-static int at803x_read_specific_status(struct phy_device *phydev) ++static int at803x_read_specific_status(struct phy_device *phydev, ++ struct at803x_ss_mask ss_mask) + { + int ss; + +@@ -940,11 +946,8 @@ static int at803x_read_specific_status(s + if (sfc < 0) + return sfc; + +- /* qca8081 takes the different bits for speed value from at803x */ +- if (phydev->drv->phy_id == QCA8081_PHY_ID) +- speed = FIELD_GET(QCA808X_SS_SPEED_MASK, ss); +- else +- speed = FIELD_GET(AT803X_SS_SPEED_MASK, ss); ++ speed = ss & ss_mask.speed_mask; ++ speed >>= ss_mask.speed_shift; + + switch (speed) { + case AT803X_SS_SPEED_10: +@@ -989,6 +992,7 @@ static int at803x_read_specific_status(s + static int at803x_read_status(struct phy_device *phydev) + { + struct at803x_priv *priv = phydev->priv; ++ struct at803x_ss_mask ss_mask = { 0 }; + int err, old_link = phydev->link; + + if (priv->is_1000basex) +@@ -1012,7 +1016,9 @@ static int at803x_read_status(struct phy + if (err < 0) + return err; + +- err = at803x_read_specific_status(phydev); ++ ss_mask.speed_mask = AT803X_SS_SPEED_MASK; ++ ss_mask.speed_shift = __bf_shf(AT803X_SS_SPEED_MASK); ++ err = at803x_read_specific_status(phydev, ss_mask); + if (err < 0) + return err; + +@@ -1869,6 +1875,7 @@ static int qca808x_config_init(struct ph + + static int qca808x_read_status(struct phy_device *phydev) + { ++ struct at803x_ss_mask ss_mask = { 0 }; + int ret; + + ret = phy_read_mmd(phydev, MDIO_MMD_AN, MDIO_AN_10GBT_STAT); +@@ -1882,7 +1889,10 @@ static int qca808x_read_status(struct ph + if (ret) + return ret; + +- ret = at803x_read_specific_status(phydev); ++ /* qca8081 takes the different bits for speed value from at803x */ ++ ss_mask.speed_mask = QCA808X_SS_SPEED_MASK; ++ ss_mask.speed_shift = __bf_shf(QCA808X_SS_SPEED_MASK); ++ ret = at803x_read_specific_status(phydev, ss_mask); + if (ret < 0) + return ret; + diff --git a/target/linux/generic/backport-6.1/709-v6.8-01-net-phy-at803x-remove-extra-space-after-cast.patch b/target/linux/generic/backport-6.1/709-v6.8-01-net-phy-at803x-remove-extra-space-after-cast.patch new file mode 100644 index 0000000000..8097a33e49 --- /dev/null +++ b/target/linux/generic/backport-6.1/709-v6.8-01-net-phy-at803x-remove-extra-space-after-cast.patch @@ -0,0 +1,27 @@ +From fc9d7264ddc32eaa647d6bfcdc25cdf9f786fde0 Mon Sep 17 00:00:00 2001 +From: Christian Marangi +Date: Mon, 18 Dec 2023 00:27:39 +0100 +Subject: [PATCH 1/2] net: phy: at803x: remove extra space after cast + +Remove extra space after cast as reported by checkpatch to keep code +clean. + +Signed-off-by: Christian Marangi +Reviewed-by: Andrew Lunn +Link: https://lore.kernel.org/r/20231217232739.27065-1-ansuelsmth@gmail.com +Signed-off-by: Paolo Abeni +--- + drivers/net/phy/at803x.c | 2 +- + 1 file changed, 1 insertion(+), 1 deletion(-) + +--- a/drivers/net/phy/at803x.c ++++ b/drivers/net/phy/at803x.c +@@ -462,7 +462,7 @@ static int at803x_set_wol(struct phy_dev + if (!ndev) + return -ENODEV; + +- mac = (const u8 *) ndev->dev_addr; ++ mac = (const u8 *)ndev->dev_addr; + + if (!is_valid_ether_addr(mac)) + return -EINVAL; diff --git a/target/linux/generic/backport-6.1/709-v6.8-02-net-phy-at803x-replace-msleep-1-with-usleep_range.patch b/target/linux/generic/backport-6.1/709-v6.8-02-net-phy-at803x-replace-msleep-1-with-usleep_range.patch new file mode 100644 index 0000000000..b8d4591087 --- /dev/null +++ b/target/linux/generic/backport-6.1/709-v6.8-02-net-phy-at803x-replace-msleep-1-with-usleep_range.patch @@ -0,0 +1,38 @@ +From 3ab5720881a924fb6405d9e6a3b09f1026467c47 Mon Sep 17 00:00:00 2001 +From: Christian Marangi +Date: Mon, 18 Dec 2023 00:25:08 +0100 +Subject: [PATCH 2/2] net: phy: at803x: replace msleep(1) with usleep_range + +Replace msleep(1) with usleep_range as suggested by timers-howto guide. + +Signed-off-by: Christian Marangi +Reviewed-by: Andrew Lunn +Link: https://lore.kernel.org/r/20231217232508.26470-1-ansuelsmth@gmail.com +Signed-off-by: Paolo Abeni +--- + drivers/net/phy/at803x.c | 6 +++--- + 1 file changed, 3 insertions(+), 3 deletions(-) + +--- a/drivers/net/phy/at803x.c ++++ b/drivers/net/phy/at803x.c +@@ -916,9 +916,9 @@ static void at803x_link_change_notify(st + at803x_context_save(phydev, &context); + + phy_device_reset(phydev, 1); +- msleep(1); ++ usleep_range(1000, 2000); + phy_device_reset(phydev, 0); +- msleep(1); ++ usleep_range(1000, 2000); + + at803x_context_restore(phydev, &context); + +@@ -1733,7 +1733,7 @@ static int qca83xx_resume(struct phy_dev + if (ret) + return ret; + +- msleep(1); ++ usleep_range(1000, 2000); + + return 0; + } diff --git a/target/linux/generic/backport-6.1/710-v6.8-net-phy-at803x-better-align-function-varibles-to-ope.patch b/target/linux/generic/backport-6.1/710-v6.8-net-phy-at803x-better-align-function-varibles-to-ope.patch new file mode 100644 index 0000000000..776b7bb43f --- /dev/null +++ b/target/linux/generic/backport-6.1/710-v6.8-net-phy-at803x-better-align-function-varibles-to-ope.patch @@ -0,0 +1,152 @@ +From 7961ef1fa10ec35ad6923fb5751877116e4b035b Mon Sep 17 00:00:00 2001 +From: Christian Marangi +Date: Tue, 19 Dec 2023 21:21:24 +0100 +Subject: [PATCH] net: phy: at803x: better align function varibles to open + parenthesis + +Better align function variables to open parenthesis as suggested by +checkpatch script for qca808x function to make code cleaner. + +For cable_test_get_status function some additional rework was needed to +handle too long functions. + +Signed-off-by: Christian Marangi +Reviewed-by: Andrew Lunn +Signed-off-by: David S. Miller +--- + drivers/net/phy/at803x.c | 67 ++++++++++++++++++++++------------------ + 1 file changed, 37 insertions(+), 30 deletions(-) + +--- a/drivers/net/phy/at803x.c ++++ b/drivers/net/phy/at803x.c +@@ -1781,27 +1781,27 @@ static int qca808x_phy_fast_retrain_conf + return ret; + + phy_write_mmd(phydev, MDIO_MMD_AN, QCA808X_PHY_MMD7_TOP_OPTION1, +- QCA808X_TOP_OPTION1_DATA); ++ QCA808X_TOP_OPTION1_DATA); + phy_write_mmd(phydev, MDIO_MMD_PMAPMD, QCA808X_PHY_MMD1_MSE_THRESHOLD_20DB, +- QCA808X_MSE_THRESHOLD_20DB_VALUE); ++ QCA808X_MSE_THRESHOLD_20DB_VALUE); + phy_write_mmd(phydev, MDIO_MMD_PMAPMD, QCA808X_PHY_MMD1_MSE_THRESHOLD_17DB, +- QCA808X_MSE_THRESHOLD_17DB_VALUE); ++ QCA808X_MSE_THRESHOLD_17DB_VALUE); + phy_write_mmd(phydev, MDIO_MMD_PMAPMD, QCA808X_PHY_MMD1_MSE_THRESHOLD_27DB, +- QCA808X_MSE_THRESHOLD_27DB_VALUE); ++ QCA808X_MSE_THRESHOLD_27DB_VALUE); + phy_write_mmd(phydev, MDIO_MMD_PMAPMD, QCA808X_PHY_MMD1_MSE_THRESHOLD_28DB, +- QCA808X_MSE_THRESHOLD_28DB_VALUE); ++ QCA808X_MSE_THRESHOLD_28DB_VALUE); + phy_write_mmd(phydev, MDIO_MMD_PCS, QCA808X_PHY_MMD3_DEBUG_1, +- QCA808X_MMD3_DEBUG_1_VALUE); ++ QCA808X_MMD3_DEBUG_1_VALUE); + phy_write_mmd(phydev, MDIO_MMD_PCS, QCA808X_PHY_MMD3_DEBUG_4, +- QCA808X_MMD3_DEBUG_4_VALUE); ++ QCA808X_MMD3_DEBUG_4_VALUE); + phy_write_mmd(phydev, MDIO_MMD_PCS, QCA808X_PHY_MMD3_DEBUG_5, +- QCA808X_MMD3_DEBUG_5_VALUE); ++ QCA808X_MMD3_DEBUG_5_VALUE); + phy_write_mmd(phydev, MDIO_MMD_PCS, QCA808X_PHY_MMD3_DEBUG_3, +- QCA808X_MMD3_DEBUG_3_VALUE); ++ QCA808X_MMD3_DEBUG_3_VALUE); + phy_write_mmd(phydev, MDIO_MMD_PCS, QCA808X_PHY_MMD3_DEBUG_6, +- QCA808X_MMD3_DEBUG_6_VALUE); ++ QCA808X_MMD3_DEBUG_6_VALUE); + phy_write_mmd(phydev, MDIO_MMD_PCS, QCA808X_PHY_MMD3_DEBUG_2, +- QCA808X_MMD3_DEBUG_2_VALUE); ++ QCA808X_MMD3_DEBUG_2_VALUE); + + return 0; + } +@@ -1838,13 +1838,14 @@ static int qca808x_config_init(struct ph + + /* Active adc&vga on 802.3az for the link 1000M and 100M */ + ret = phy_modify_mmd(phydev, MDIO_MMD_PCS, QCA808X_PHY_MMD3_ADDR_CLD_CTRL7, +- QCA808X_8023AZ_AFE_CTRL_MASK, QCA808X_8023AZ_AFE_EN); ++ QCA808X_8023AZ_AFE_CTRL_MASK, QCA808X_8023AZ_AFE_EN); + if (ret) + return ret; + + /* Adjust the threshold on 802.3az for the link 1000M */ + ret = phy_write_mmd(phydev, MDIO_MMD_PCS, +- QCA808X_PHY_MMD3_AZ_TRAINING_CTRL, QCA808X_MMD3_AZ_TRAINING_VAL); ++ QCA808X_PHY_MMD3_AZ_TRAINING_CTRL, ++ QCA808X_MMD3_AZ_TRAINING_VAL); + if (ret) + return ret; + +@@ -1870,7 +1871,8 @@ static int qca808x_config_init(struct ph + + /* Configure adc threshold as 100mv for the link 10M */ + return at803x_debug_reg_mask(phydev, QCA808X_PHY_DEBUG_ADC_THRESHOLD, +- QCA808X_ADC_THRESHOLD_MASK, QCA808X_ADC_THRESHOLD_100MV); ++ QCA808X_ADC_THRESHOLD_MASK, ++ QCA808X_ADC_THRESHOLD_100MV); + } + + static int qca808x_read_status(struct phy_device *phydev) +@@ -1883,7 +1885,7 @@ static int qca808x_read_status(struct ph + return ret; + + linkmode_mod_bit(ETHTOOL_LINK_MODE_2500baseT_Full_BIT, phydev->lp_advertising, +- ret & MDIO_AN_10GBT_STAT_LP2_5G); ++ ret & MDIO_AN_10GBT_STAT_LP2_5G); + + ret = genphy_read_status(phydev); + if (ret) +@@ -1913,7 +1915,7 @@ static int qca808x_read_status(struct ph + */ + if (qca808x_has_fast_retrain_or_slave_seed(phydev)) { + if (phydev->master_slave_state == MASTER_SLAVE_STATE_ERR || +- qca808x_is_prefer_master(phydev)) { ++ qca808x_is_prefer_master(phydev)) { + qca808x_phy_ms_seed_enable(phydev, false); + } else { + qca808x_phy_ms_seed_enable(phydev, true); +@@ -2070,18 +2072,22 @@ static int qca808x_cable_test_get_status + ethnl_cable_test_result(phydev, ETHTOOL_A_CABLE_PAIR_D, + qca808x_cable_test_result_trans(pair_d)); + +- if (qca808x_cdt_fault_length_valid(pair_a)) +- ethnl_cable_test_fault_length(phydev, ETHTOOL_A_CABLE_PAIR_A, +- qca808x_cdt_fault_length(phydev, ETHTOOL_A_CABLE_PAIR_A)); +- if (qca808x_cdt_fault_length_valid(pair_b)) +- ethnl_cable_test_fault_length(phydev, ETHTOOL_A_CABLE_PAIR_B, +- qca808x_cdt_fault_length(phydev, ETHTOOL_A_CABLE_PAIR_B)); +- if (qca808x_cdt_fault_length_valid(pair_c)) +- ethnl_cable_test_fault_length(phydev, ETHTOOL_A_CABLE_PAIR_C, +- qca808x_cdt_fault_length(phydev, ETHTOOL_A_CABLE_PAIR_C)); +- if (qca808x_cdt_fault_length_valid(pair_d)) +- ethnl_cable_test_fault_length(phydev, ETHTOOL_A_CABLE_PAIR_D, +- qca808x_cdt_fault_length(phydev, ETHTOOL_A_CABLE_PAIR_D)); ++ if (qca808x_cdt_fault_length_valid(pair_a)) { ++ val = qca808x_cdt_fault_length(phydev, ETHTOOL_A_CABLE_PAIR_A); ++ ethnl_cable_test_fault_length(phydev, ETHTOOL_A_CABLE_PAIR_A, val); ++ } ++ if (qca808x_cdt_fault_length_valid(pair_b)) { ++ val = qca808x_cdt_fault_length(phydev, ETHTOOL_A_CABLE_PAIR_B); ++ ethnl_cable_test_fault_length(phydev, ETHTOOL_A_CABLE_PAIR_B, val); ++ } ++ if (qca808x_cdt_fault_length_valid(pair_c)) { ++ val = qca808x_cdt_fault_length(phydev, ETHTOOL_A_CABLE_PAIR_C); ++ ethnl_cable_test_fault_length(phydev, ETHTOOL_A_CABLE_PAIR_C, val); ++ } ++ if (qca808x_cdt_fault_length_valid(pair_d)) { ++ val = qca808x_cdt_fault_length(phydev, ETHTOOL_A_CABLE_PAIR_D); ++ ethnl_cable_test_fault_length(phydev, ETHTOOL_A_CABLE_PAIR_D, val); ++ } + + *finished = true; + +@@ -2148,8 +2154,9 @@ static void qca808x_link_change_notify(s + * the interface device address is always phy address added by 1. + */ + mdiobus_c45_modify_changed(phydev->mdio.bus, phydev->mdio.addr + 1, +- MDIO_MMD_PMAPMD, QCA8081_PHY_SERDES_MMD1_FIFO_CTRL, +- QCA8081_PHY_FIFO_RSTN, phydev->link ? QCA8081_PHY_FIFO_RSTN : 0); ++ MDIO_MMD_PMAPMD, QCA8081_PHY_SERDES_MMD1_FIFO_CTRL, ++ QCA8081_PHY_FIFO_RSTN, ++ phydev->link ? QCA8081_PHY_FIFO_RSTN : 0); + } + + static struct phy_driver at803x_driver[] = { diff --git a/target/linux/generic/backport-6.1/711-v6.8-01-net-phy-at803x-generalize-cdt-fault-length-function.patch b/target/linux/generic/backport-6.1/711-v6.8-01-net-phy-at803x-generalize-cdt-fault-length-function.patch new file mode 100644 index 0000000000..d7196da46e --- /dev/null +++ b/target/linux/generic/backport-6.1/711-v6.8-01-net-phy-at803x-generalize-cdt-fault-length-function.patch @@ -0,0 +1,62 @@ +From 22eb276098da820d9440fad22901f9b74ed4d659 Mon Sep 17 00:00:00 2001 +From: Christian Marangi +Date: Thu, 4 Jan 2024 22:30:38 +0100 +Subject: [PATCH 1/4] net: phy: at803x: generalize cdt fault length function + +Generalize cable test fault length function since they all base on the +same magic values (already reverse engineered to understand the meaning +of it) to have consistenct values on every PHY. + +Signed-off-by: Christian Marangi +Reviewed-by: Simon Horman +Signed-off-by: David S. Miller +--- + drivers/net/phy/at803x.c | 13 ++++++------- + 1 file changed, 6 insertions(+), 7 deletions(-) + +--- a/drivers/net/phy/at803x.c ++++ b/drivers/net/phy/at803x.c +@@ -1192,10 +1192,8 @@ static bool at803x_cdt_fault_length_vali + return false; + } + +-static int at803x_cdt_fault_length(u16 status) ++static int at803x_cdt_fault_length(int dt) + { +- int dt; +- + /* According to the datasheet the distance to the fault is + * DELTA_TIME * 0.824 meters. + * +@@ -1211,8 +1209,6 @@ static int at803x_cdt_fault_length(u16 s + * With a VF of 0.69 we get the factor 0.824 mentioned in the + * datasheet. + */ +- dt = FIELD_GET(AT803X_CDT_STATUS_DELTA_TIME_MASK, status); +- + return (dt * 824) / 10; + } + +@@ -1265,9 +1261,11 @@ static int at803x_cable_test_one_pair(st + ethnl_cable_test_result(phydev, ethtool_pair[pair], + at803x_cable_test_result_trans(val)); + +- if (at803x_cdt_fault_length_valid(val)) ++ if (at803x_cdt_fault_length_valid(val)) { ++ val = FIELD_GET(AT803X_CDT_STATUS_DELTA_TIME_MASK, val); + ethnl_cable_test_fault_length(phydev, ethtool_pair[pair], + at803x_cdt_fault_length(val)); ++ } + + return 1; + } +@@ -1992,7 +1990,8 @@ static int qca808x_cdt_fault_length(stru + if (val < 0) + return val; + +- return (FIELD_GET(QCA808X_CDT_DIAG_LENGTH, val) * 824) / 10; ++ val = FIELD_GET(QCA808X_CDT_DIAG_LENGTH, val); ++ return at803x_cdt_fault_length(val); + } + + static int qca808x_cable_test_start(struct phy_device *phydev) diff --git a/target/linux/generic/backport-6.1/711-v6.8-02-net-phy-at803x-refactor-qca808x-cable-test-get-statu.patch b/target/linux/generic/backport-6.1/711-v6.8-02-net-phy-at803x-refactor-qca808x-cable-test-get-statu.patch new file mode 100644 index 0000000000..5d38fe7e91 --- /dev/null +++ b/target/linux/generic/backport-6.1/711-v6.8-02-net-phy-at803x-refactor-qca808x-cable-test-get-statu.patch @@ -0,0 +1,118 @@ +From e0e9ada1df6133513249861c1d91c1dbefd9383b Mon Sep 17 00:00:00 2001 +From: Christian Marangi +Date: Thu, 4 Jan 2024 22:30:39 +0100 +Subject: [PATCH 2/4] net: phy: at803x: refactor qca808x cable test get status + function + +Refactor qca808x cable test get status function to remove code +duplication and clean things up. + +The same logic is applied to each pair hence it can be generalized and +moved to a common function. + +Signed-off-by: Christian Marangi +Reviewed-by: Simon Horman +Signed-off-by: David S. Miller +--- + drivers/net/phy/at803x.c | 80 ++++++++++++++++++++++++---------------- + 1 file changed, 49 insertions(+), 31 deletions(-) + +--- a/drivers/net/phy/at803x.c ++++ b/drivers/net/phy/at803x.c +@@ -2035,10 +2035,43 @@ static int qca808x_cable_test_start(stru + return 0; + } + ++static int qca808x_cable_test_get_pair_status(struct phy_device *phydev, u8 pair, ++ u16 status) ++{ ++ u16 pair_code; ++ int length; ++ ++ switch (pair) { ++ case ETHTOOL_A_CABLE_PAIR_A: ++ pair_code = FIELD_GET(QCA808X_CDT_CODE_PAIR_A, status); ++ break; ++ case ETHTOOL_A_CABLE_PAIR_B: ++ pair_code = FIELD_GET(QCA808X_CDT_CODE_PAIR_B, status); ++ break; ++ case ETHTOOL_A_CABLE_PAIR_C: ++ pair_code = FIELD_GET(QCA808X_CDT_CODE_PAIR_C, status); ++ break; ++ case ETHTOOL_A_CABLE_PAIR_D: ++ pair_code = FIELD_GET(QCA808X_CDT_CODE_PAIR_D, status); ++ break; ++ default: ++ return -EINVAL; ++ } ++ ++ ethnl_cable_test_result(phydev, pair, ++ qca808x_cable_test_result_trans(pair_code)); ++ ++ if (qca808x_cdt_fault_length_valid(pair_code)) { ++ length = qca808x_cdt_fault_length(phydev, pair); ++ ethnl_cable_test_fault_length(phydev, pair, length); ++ } ++ ++ return 0; ++} ++ + static int qca808x_cable_test_get_status(struct phy_device *phydev, bool *finished) + { + int ret, val; +- int pair_a, pair_b, pair_c, pair_d; + + *finished = false; + +@@ -2057,36 +2090,21 @@ static int qca808x_cable_test_get_status + if (val < 0) + return val; + +- pair_a = FIELD_GET(QCA808X_CDT_CODE_PAIR_A, val); +- pair_b = FIELD_GET(QCA808X_CDT_CODE_PAIR_B, val); +- pair_c = FIELD_GET(QCA808X_CDT_CODE_PAIR_C, val); +- pair_d = FIELD_GET(QCA808X_CDT_CODE_PAIR_D, val); +- +- ethnl_cable_test_result(phydev, ETHTOOL_A_CABLE_PAIR_A, +- qca808x_cable_test_result_trans(pair_a)); +- ethnl_cable_test_result(phydev, ETHTOOL_A_CABLE_PAIR_B, +- qca808x_cable_test_result_trans(pair_b)); +- ethnl_cable_test_result(phydev, ETHTOOL_A_CABLE_PAIR_C, +- qca808x_cable_test_result_trans(pair_c)); +- ethnl_cable_test_result(phydev, ETHTOOL_A_CABLE_PAIR_D, +- qca808x_cable_test_result_trans(pair_d)); +- +- if (qca808x_cdt_fault_length_valid(pair_a)) { +- val = qca808x_cdt_fault_length(phydev, ETHTOOL_A_CABLE_PAIR_A); +- ethnl_cable_test_fault_length(phydev, ETHTOOL_A_CABLE_PAIR_A, val); +- } +- if (qca808x_cdt_fault_length_valid(pair_b)) { +- val = qca808x_cdt_fault_length(phydev, ETHTOOL_A_CABLE_PAIR_B); +- ethnl_cable_test_fault_length(phydev, ETHTOOL_A_CABLE_PAIR_B, val); +- } +- if (qca808x_cdt_fault_length_valid(pair_c)) { +- val = qca808x_cdt_fault_length(phydev, ETHTOOL_A_CABLE_PAIR_C); +- ethnl_cable_test_fault_length(phydev, ETHTOOL_A_CABLE_PAIR_C, val); +- } +- if (qca808x_cdt_fault_length_valid(pair_d)) { +- val = qca808x_cdt_fault_length(phydev, ETHTOOL_A_CABLE_PAIR_D); +- ethnl_cable_test_fault_length(phydev, ETHTOOL_A_CABLE_PAIR_D, val); +- } ++ ret = qca808x_cable_test_get_pair_status(phydev, ETHTOOL_A_CABLE_PAIR_A, val); ++ if (ret) ++ return ret; ++ ++ ret = qca808x_cable_test_get_pair_status(phydev, ETHTOOL_A_CABLE_PAIR_B, val); ++ if (ret) ++ return ret; ++ ++ ret = qca808x_cable_test_get_pair_status(phydev, ETHTOOL_A_CABLE_PAIR_C, val); ++ if (ret) ++ return ret; ++ ++ ret = qca808x_cable_test_get_pair_status(phydev, ETHTOOL_A_CABLE_PAIR_D, val); ++ if (ret) ++ return ret; + + *finished = true; + diff --git a/target/linux/generic/backport-6.1/711-v6.8-03-net-phy-at803x-add-support-for-cdt-cross-short-test-.patch b/target/linux/generic/backport-6.1/711-v6.8-03-net-phy-at803x-add-support-for-cdt-cross-short-test-.patch new file mode 100644 index 0000000000..d5793860a9 --- /dev/null +++ b/target/linux/generic/backport-6.1/711-v6.8-03-net-phy-at803x-add-support-for-cdt-cross-short-test-.patch @@ -0,0 +1,182 @@ +From ea73e5ea442ee2aade67b1fb1233ccb3cbea2ceb Mon Sep 17 00:00:00 2001 +From: Christian Marangi +Date: Thu, 4 Jan 2024 22:30:40 +0100 +Subject: [PATCH 3/4] net: phy: at803x: add support for cdt cross short test + for qca808x + +QCA808x PHY Family supports Cable Diagnostic Test also for Cross Pair +Short. + +Add all the define to make enable and support these additional tests. + +Cross Short test was previously disabled by default, this is now changed +and enabled by default. In this mode, the mask changed a bit and length +is shifted based on the fault condition. + +Signed-off-by: Christian Marangi +Reviewed-by: Simon Horman +Signed-off-by: David S. Miller +--- + drivers/net/phy/at803x.c | 86 ++++++++++++++++++++++++++++++++-------- + 1 file changed, 69 insertions(+), 17 deletions(-) + +--- a/drivers/net/phy/at803x.c ++++ b/drivers/net/phy/at803x.c +@@ -254,6 +254,7 @@ + + #define QCA808X_CDT_ENABLE_TEST BIT(15) + #define QCA808X_CDT_INTER_CHECK_DIS BIT(13) ++#define QCA808X_CDT_STATUS BIT(11) + #define QCA808X_CDT_LENGTH_UNIT BIT(10) + + #define QCA808X_MMD3_CDT_STATUS 0x8064 +@@ -261,16 +262,44 @@ + #define QCA808X_MMD3_CDT_DIAG_PAIR_B 0x8066 + #define QCA808X_MMD3_CDT_DIAG_PAIR_C 0x8067 + #define QCA808X_MMD3_CDT_DIAG_PAIR_D 0x8068 +-#define QCA808X_CDT_DIAG_LENGTH GENMASK(7, 0) ++#define QCA808X_CDT_DIAG_LENGTH_SAME_SHORT GENMASK(15, 8) ++#define QCA808X_CDT_DIAG_LENGTH_CROSS_SHORT GENMASK(7, 0) + + #define QCA808X_CDT_CODE_PAIR_A GENMASK(15, 12) + #define QCA808X_CDT_CODE_PAIR_B GENMASK(11, 8) + #define QCA808X_CDT_CODE_PAIR_C GENMASK(7, 4) + #define QCA808X_CDT_CODE_PAIR_D GENMASK(3, 0) +-#define QCA808X_CDT_STATUS_STAT_FAIL 0 +-#define QCA808X_CDT_STATUS_STAT_NORMAL 1 +-#define QCA808X_CDT_STATUS_STAT_OPEN 2 +-#define QCA808X_CDT_STATUS_STAT_SHORT 3 ++ ++#define QCA808X_CDT_STATUS_STAT_TYPE GENMASK(1, 0) ++#define QCA808X_CDT_STATUS_STAT_FAIL FIELD_PREP_CONST(QCA808X_CDT_STATUS_STAT_TYPE, 0) ++#define QCA808X_CDT_STATUS_STAT_NORMAL FIELD_PREP_CONST(QCA808X_CDT_STATUS_STAT_TYPE, 1) ++#define QCA808X_CDT_STATUS_STAT_SAME_OPEN FIELD_PREP_CONST(QCA808X_CDT_STATUS_STAT_TYPE, 2) ++#define QCA808X_CDT_STATUS_STAT_SAME_SHORT FIELD_PREP_CONST(QCA808X_CDT_STATUS_STAT_TYPE, 3) ++ ++#define QCA808X_CDT_STATUS_STAT_MDI GENMASK(3, 2) ++#define QCA808X_CDT_STATUS_STAT_MDI1 FIELD_PREP_CONST(QCA808X_CDT_STATUS_STAT_MDI, 1) ++#define QCA808X_CDT_STATUS_STAT_MDI2 FIELD_PREP_CONST(QCA808X_CDT_STATUS_STAT_MDI, 2) ++#define QCA808X_CDT_STATUS_STAT_MDI3 FIELD_PREP_CONST(QCA808X_CDT_STATUS_STAT_MDI, 3) ++ ++/* NORMAL are MDI with type set to 0 */ ++#define QCA808X_CDT_STATUS_STAT_CROSS_SHORT_WITH_MDI1_SAME_NORMAL QCA808X_CDT_STATUS_STAT_MDI1 ++#define QCA808X_CDT_STATUS_STAT_CROSS_SHORT_WITH_MDI1_SAME_OPEN (QCA808X_CDT_STATUS_STAT_SAME_OPEN |\ ++ QCA808X_CDT_STATUS_STAT_MDI1) ++#define QCA808X_CDT_STATUS_STAT_CROSS_SHORT_WITH_MDI1_SAME_SHORT (QCA808X_CDT_STATUS_STAT_SAME_SHORT |\ ++ QCA808X_CDT_STATUS_STAT_MDI1) ++#define QCA808X_CDT_STATUS_STAT_CROSS_SHORT_WITH_MDI2_SAME_NORMAL QCA808X_CDT_STATUS_STAT_MDI2 ++#define QCA808X_CDT_STATUS_STAT_CROSS_SHORT_WITH_MDI2_SAME_OPEN (QCA808X_CDT_STATUS_STAT_SAME_OPEN |\ ++ QCA808X_CDT_STATUS_STAT_MDI2) ++#define QCA808X_CDT_STATUS_STAT_CROSS_SHORT_WITH_MDI2_SAME_SHORT (QCA808X_CDT_STATUS_STAT_SAME_SHORT |\ ++ QCA808X_CDT_STATUS_STAT_MDI2) ++#define QCA808X_CDT_STATUS_STAT_CROSS_SHORT_WITH_MDI3_SAME_NORMAL QCA808X_CDT_STATUS_STAT_MDI3 ++#define QCA808X_CDT_STATUS_STAT_CROSS_SHORT_WITH_MDI3_SAME_OPEN (QCA808X_CDT_STATUS_STAT_SAME_OPEN |\ ++ QCA808X_CDT_STATUS_STAT_MDI3) ++#define QCA808X_CDT_STATUS_STAT_CROSS_SHORT_WITH_MDI3_SAME_SHORT (QCA808X_CDT_STATUS_STAT_SAME_SHORT |\ ++ QCA808X_CDT_STATUS_STAT_MDI3) ++ ++/* Added for reference of existence but should be handled by wait_for_completion already */ ++#define QCA808X_CDT_STATUS_STAT_BUSY (BIT(1) | BIT(3)) + + /* QCA808X 1G chip type */ + #define QCA808X_PHY_MMD7_CHIP_TYPE 0x901d +@@ -1941,8 +1970,17 @@ static int qca808x_soft_reset(struct phy + static bool qca808x_cdt_fault_length_valid(int cdt_code) + { + switch (cdt_code) { +- case QCA808X_CDT_STATUS_STAT_SHORT: +- case QCA808X_CDT_STATUS_STAT_OPEN: ++ case QCA808X_CDT_STATUS_STAT_SAME_SHORT: ++ case QCA808X_CDT_STATUS_STAT_SAME_OPEN: ++ case QCA808X_CDT_STATUS_STAT_CROSS_SHORT_WITH_MDI1_SAME_NORMAL: ++ case QCA808X_CDT_STATUS_STAT_CROSS_SHORT_WITH_MDI1_SAME_OPEN: ++ case QCA808X_CDT_STATUS_STAT_CROSS_SHORT_WITH_MDI1_SAME_SHORT: ++ case QCA808X_CDT_STATUS_STAT_CROSS_SHORT_WITH_MDI2_SAME_NORMAL: ++ case QCA808X_CDT_STATUS_STAT_CROSS_SHORT_WITH_MDI2_SAME_OPEN: ++ case QCA808X_CDT_STATUS_STAT_CROSS_SHORT_WITH_MDI2_SAME_SHORT: ++ case QCA808X_CDT_STATUS_STAT_CROSS_SHORT_WITH_MDI3_SAME_NORMAL: ++ case QCA808X_CDT_STATUS_STAT_CROSS_SHORT_WITH_MDI3_SAME_OPEN: ++ case QCA808X_CDT_STATUS_STAT_CROSS_SHORT_WITH_MDI3_SAME_SHORT: + return true; + default: + return false; +@@ -1954,17 +1992,28 @@ static int qca808x_cable_test_result_tra + switch (cdt_code) { + case QCA808X_CDT_STATUS_STAT_NORMAL: + return ETHTOOL_A_CABLE_RESULT_CODE_OK; +- case QCA808X_CDT_STATUS_STAT_SHORT: ++ case QCA808X_CDT_STATUS_STAT_SAME_SHORT: + return ETHTOOL_A_CABLE_RESULT_CODE_SAME_SHORT; +- case QCA808X_CDT_STATUS_STAT_OPEN: ++ case QCA808X_CDT_STATUS_STAT_SAME_OPEN: + return ETHTOOL_A_CABLE_RESULT_CODE_OPEN; ++ case QCA808X_CDT_STATUS_STAT_CROSS_SHORT_WITH_MDI1_SAME_NORMAL: ++ case QCA808X_CDT_STATUS_STAT_CROSS_SHORT_WITH_MDI1_SAME_OPEN: ++ case QCA808X_CDT_STATUS_STAT_CROSS_SHORT_WITH_MDI1_SAME_SHORT: ++ case QCA808X_CDT_STATUS_STAT_CROSS_SHORT_WITH_MDI2_SAME_NORMAL: ++ case QCA808X_CDT_STATUS_STAT_CROSS_SHORT_WITH_MDI2_SAME_OPEN: ++ case QCA808X_CDT_STATUS_STAT_CROSS_SHORT_WITH_MDI2_SAME_SHORT: ++ case QCA808X_CDT_STATUS_STAT_CROSS_SHORT_WITH_MDI3_SAME_NORMAL: ++ case QCA808X_CDT_STATUS_STAT_CROSS_SHORT_WITH_MDI3_SAME_OPEN: ++ case QCA808X_CDT_STATUS_STAT_CROSS_SHORT_WITH_MDI3_SAME_SHORT: ++ return ETHTOOL_A_CABLE_RESULT_CODE_CROSS_SHORT; + case QCA808X_CDT_STATUS_STAT_FAIL: + default: + return ETHTOOL_A_CABLE_RESULT_CODE_UNSPEC; + } + } + +-static int qca808x_cdt_fault_length(struct phy_device *phydev, int pair) ++static int qca808x_cdt_fault_length(struct phy_device *phydev, int pair, ++ int result) + { + int val; + u32 cdt_length_reg = 0; +@@ -1990,7 +2039,11 @@ static int qca808x_cdt_fault_length(stru + if (val < 0) + return val; + +- val = FIELD_GET(QCA808X_CDT_DIAG_LENGTH, val); ++ if (result == ETHTOOL_A_CABLE_RESULT_CODE_SAME_SHORT) ++ val = FIELD_GET(QCA808X_CDT_DIAG_LENGTH_SAME_SHORT, val); ++ else ++ val = FIELD_GET(QCA808X_CDT_DIAG_LENGTH_CROSS_SHORT, val); ++ + return at803x_cdt_fault_length(val); + } + +@@ -2038,8 +2091,8 @@ static int qca808x_cable_test_start(stru + static int qca808x_cable_test_get_pair_status(struct phy_device *phydev, u8 pair, + u16 status) + { ++ int length, result; + u16 pair_code; +- int length; + + switch (pair) { + case ETHTOOL_A_CABLE_PAIR_A: +@@ -2058,11 +2111,11 @@ static int qca808x_cable_test_get_pair_s + return -EINVAL; + } + +- ethnl_cable_test_result(phydev, pair, +- qca808x_cable_test_result_trans(pair_code)); ++ result = qca808x_cable_test_result_trans(pair_code); ++ ethnl_cable_test_result(phydev, pair, result); + + if (qca808x_cdt_fault_length_valid(pair_code)) { +- length = qca808x_cdt_fault_length(phydev, pair); ++ length = qca808x_cdt_fault_length(phydev, pair, result); + ethnl_cable_test_fault_length(phydev, pair, length); + } + +@@ -2076,8 +2129,7 @@ static int qca808x_cable_test_get_status + *finished = false; + + val = QCA808X_CDT_ENABLE_TEST | +- QCA808X_CDT_LENGTH_UNIT | +- QCA808X_CDT_INTER_CHECK_DIS; ++ QCA808X_CDT_LENGTH_UNIT; + ret = at803x_cdt_start(phydev, val); + if (ret) + return ret; diff --git a/target/linux/generic/backport-6.1/711-v6.8-04-net-phy-at803x-make-read_status-more-generic.patch b/target/linux/generic/backport-6.1/711-v6.8-04-net-phy-at803x-make-read_status-more-generic.patch new file mode 100644 index 0000000000..c146e502fe --- /dev/null +++ b/target/linux/generic/backport-6.1/711-v6.8-04-net-phy-at803x-make-read_status-more-generic.patch @@ -0,0 +1,62 @@ +From c34d9452d4e5d98a655d7b625e85466320885416 Mon Sep 17 00:00:00 2001 +From: Christian Marangi +Date: Thu, 4 Jan 2024 22:30:41 +0100 +Subject: [PATCH 4/4] net: phy: at803x: make read_status more generic + +Make read_status more generic in preparation on moving it to shared +library as other PHY Family Driver will have the exact same +implementation. + +The only specific part was a check for AR8031/33 if 1000basex was used. +The check is moved to a dedicated function specific for those PHYs. + +Signed-off-by: Christian Marangi +Reviewed-by: Simon Horman +Signed-off-by: David S. Miller +--- + drivers/net/phy/at803x.c | 17 ++++++++++++----- + 1 file changed, 12 insertions(+), 5 deletions(-) + +--- a/drivers/net/phy/at803x.c ++++ b/drivers/net/phy/at803x.c +@@ -1020,13 +1020,9 @@ static int at803x_read_specific_status(s + + static int at803x_read_status(struct phy_device *phydev) + { +- struct at803x_priv *priv = phydev->priv; + struct at803x_ss_mask ss_mask = { 0 }; + int err, old_link = phydev->link; + +- if (priv->is_1000basex) +- return genphy_c37_read_status(phydev); +- + /* Update the link, but return if there was an error */ + err = genphy_update_link(phydev); + if (err) +@@ -1618,6 +1614,17 @@ static int at8031_config_intr(struct phy + return at803x_config_intr(phydev); + } + ++/* AR8031 and AR8033 share the same read status logic */ ++static int at8031_read_status(struct phy_device *phydev) ++{ ++ struct at803x_priv *priv = phydev->priv; ++ ++ if (priv->is_1000basex) ++ return genphy_c37_read_status(phydev); ++ ++ return at803x_read_status(phydev); ++} ++ + /* AR8031 and AR8035 share the same cable test get status reg */ + static int at8031_cable_test_get_status(struct phy_device *phydev, + bool *finished) +@@ -2281,7 +2288,7 @@ static struct phy_driver at803x_driver[] + .read_page = at803x_read_page, + .write_page = at803x_write_page, + .get_features = at803x_get_features, +- .read_status = at803x_read_status, ++ .read_status = at8031_read_status, + .config_intr = at8031_config_intr, + .handle_interrupt = at803x_handle_interrupt, + .get_tunable = at803x_get_tunable, diff --git a/target/linux/generic/backport-6.1/792-v6.6-net-phylink-add-pcs_enable-pcs_disable-methods.patch b/target/linux/generic/backport-6.1/792-v6.6-net-phylink-add-pcs_enable-pcs_disable-methods.patch index eac8966a48..893a81246d 100644 --- a/target/linux/generic/backport-6.1/792-v6.6-net-phylink-add-pcs_enable-pcs_disable-methods.patch +++ b/target/linux/generic/backport-6.1/792-v6.6-net-phylink-add-pcs_enable-pcs_disable-methods.patch @@ -35,7 +35,7 @@ Signed-off-by: David S. Miller bool mac_link_dropped; bool using_mac_select_pcs; -@@ -987,6 +992,22 @@ static void phylink_mac_pcs_an_restart(s +@@ -990,6 +995,22 @@ static void phylink_mac_pcs_an_restart(s } } @@ -58,7 +58,7 @@ Signed-off-by: David S. Miller static void phylink_major_config(struct phylink *pl, bool restart, const struct phylink_link_state *state) { -@@ -1023,11 +1044,16 @@ static void phylink_major_config(struct +@@ -1026,11 +1047,16 @@ static void phylink_major_config(struct /* If we have a new PCS, switch to the new PCS after preparing the MAC * for the change. */ @@ -76,7 +76,7 @@ Signed-off-by: David S. Miller if (pl->pcs) { err = pl->pcs->ops->pcs_config(pl->pcs, pl->cur_link_an_mode, state->interface, -@@ -1499,6 +1525,7 @@ struct phylink *phylink_create(struct ph +@@ -1502,6 +1528,7 @@ struct phylink *phylink_create(struct ph pl->link_config.speed = SPEED_UNKNOWN; pl->link_config.duplex = DUPLEX_UNKNOWN; pl->link_config.an_enabled = true; @@ -84,7 +84,7 @@ Signed-off-by: David S. Miller pl->mac_ops = mac_ops; __set_bit(PHYLINK_DISABLE_STOPPED, &pl->phylink_disable_state); timer_setup(&pl->link_poll, phylink_fixed_poll, 0); -@@ -1900,6 +1927,8 @@ void phylink_start(struct phylink *pl) +@@ -1903,6 +1930,8 @@ void phylink_start(struct phylink *pl) if (pl->netdev) netif_carrier_off(pl->netdev); @@ -93,7 +93,7 @@ Signed-off-by: David S. Miller /* Apply the link configuration to the MAC when starting. This allows * a fixed-link to start with the correct parameters, and also * ensures that we set the appropriate advertisement for Serdes links. -@@ -1910,6 +1939,8 @@ void phylink_start(struct phylink *pl) +@@ -1913,6 +1942,8 @@ void phylink_start(struct phylink *pl) */ phylink_mac_initial_config(pl, true); @@ -102,7 +102,7 @@ Signed-off-by: David S. Miller phylink_enable_and_run_resolve(pl, PHYLINK_DISABLE_STOPPED); if (pl->cfg_link_an_mode == MLO_AN_FIXED && pl->link_gpio) { -@@ -1928,15 +1959,9 @@ void phylink_start(struct phylink *pl) +@@ -1931,15 +1962,9 @@ void phylink_start(struct phylink *pl) poll = true; } @@ -120,7 +120,7 @@ Signed-off-by: David S. Miller if (poll) mod_timer(&pl->link_poll, jiffies + HZ); if (pl->phydev) -@@ -1973,6 +1998,10 @@ void phylink_stop(struct phylink *pl) +@@ -1976,6 +2001,10 @@ void phylink_stop(struct phylink *pl) } phylink_run_resolve_and_disable(pl, PHYLINK_DISABLE_STOPPED); diff --git a/target/linux/generic/backport-6.1/801-v6.4-05-net-phy-Add-a-binding-for-PHY-LEDs.patch b/target/linux/generic/backport-6.1/801-v6.4-05-net-phy-Add-a-binding-for-PHY-LEDs.patch index a3184513ee..d33fc72dd1 100644 --- a/target/linux/generic/backport-6.1/801-v6.4-05-net-phy-Add-a-binding-for-PHY-LEDs.patch +++ b/target/linux/generic/backport-6.1/801-v6.4-05-net-phy-Add-a-binding-for-PHY-LEDs.patch @@ -153,7 +153,7 @@ Signed-off-by: David S. Miller #include #include #include -@@ -593,6 +594,7 @@ struct macsec_ops; +@@ -602,6 +603,7 @@ struct macsec_ops; * @phy_num_led_triggers: Number of triggers in @phy_led_triggers * @led_link_trigger: LED trigger for link up/down * @last_triggered: last LED trigger for link speed @@ -161,7 +161,7 @@ Signed-off-by: David S. Miller * @master_slave_set: User requested master/slave configuration * @master_slave_get: Current master/slave advertisement * @master_slave_state: Current master/slave configuration -@@ -685,6 +687,7 @@ struct phy_device { +@@ -694,6 +696,7 @@ struct phy_device { struct phy_led_trigger *led_link_trigger; #endif @@ -169,7 +169,7 @@ Signed-off-by: David S. Miller /* * Interrupt number for this PHY -@@ -759,6 +762,19 @@ struct phy_tdr_config { +@@ -768,6 +771,19 @@ struct phy_tdr_config { #define PHY_PAIR_ALL -1 /** diff --git a/target/linux/generic/backport-6.1/801-v6.4-06-net-phy-phy_device-Call-into-the-PHY-driver-to-set-L.patch b/target/linux/generic/backport-6.1/801-v6.4-06-net-phy-phy_device-Call-into-the-PHY-driver-to-set-L.patch index 57db12ed4a..c1678ce2ea 100644 --- a/target/linux/generic/backport-6.1/801-v6.4-06-net-phy-phy_device-Call-into-the-PHY-driver-to-set-L.patch +++ b/target/linux/generic/backport-6.1/801-v6.4-06-net-phy-phy_device-Call-into-the-PHY-driver-to-set-L.patch @@ -59,7 +59,7 @@ Signed-off-by: David S. Miller init_data.fwnode = of_fwnode_handle(led); --- a/include/linux/phy.h +++ b/include/linux/phy.h -@@ -765,15 +765,19 @@ struct phy_tdr_config { +@@ -774,15 +774,19 @@ struct phy_tdr_config { * struct phy_led: An LED driven by the PHY * * @list: List of LEDs @@ -79,7 +79,7 @@ Signed-off-by: David S. Miller /** * struct phy_driver - Driver structure for a particular PHY type * -@@ -988,6 +992,15 @@ struct phy_driver { +@@ -997,6 +1001,15 @@ struct phy_driver { int (*get_sqi)(struct phy_device *dev); /** @get_sqi_max: Get the maximum signal quality indication */ int (*get_sqi_max)(struct phy_device *dev); diff --git a/target/linux/generic/backport-6.1/801-v6.4-08-net-phy-phy_device-Call-into-the-PHY-driver-to-set-L.patch b/target/linux/generic/backport-6.1/801-v6.4-08-net-phy-phy_device-Call-into-the-PHY-driver-to-set-L.patch index e868722afa..f234b2bff1 100644 --- a/target/linux/generic/backport-6.1/801-v6.4-08-net-phy-phy_device-Call-into-the-PHY-driver-to-set-L.patch +++ b/target/linux/generic/backport-6.1/801-v6.4-08-net-phy-phy_device-Call-into-the-PHY-driver-to-set-L.patch @@ -52,7 +52,7 @@ Signed-off-by: David S. Miller init_data.fwnode = of_fwnode_handle(led); --- a/include/linux/phy.h +++ b/include/linux/phy.h -@@ -1001,6 +1001,18 @@ struct phy_driver { +@@ -1010,6 +1010,18 @@ struct phy_driver { */ int (*led_brightness_set)(struct phy_device *dev, u8 index, enum led_brightness value); diff --git a/target/linux/generic/backport-6.1/826-v6.6-02-net-phy-phy_device-Call-into-the-PHY-driver-to-set-L.patch b/target/linux/generic/backport-6.1/826-v6.6-02-net-phy-phy_device-Call-into-the-PHY-driver-to-set-L.patch index 6cd798fc5d..daa970884e 100644 --- a/target/linux/generic/backport-6.1/826-v6.6-02-net-phy-phy_device-Call-into-the-PHY-driver-to-set-L.patch +++ b/target/linux/generic/backport-6.1/826-v6.6-02-net-phy-phy_device-Call-into-the-PHY-driver-to-set-L.patch @@ -107,7 +107,7 @@ Signed-off-by: Jakub Kicinski init_data.fwnode = of_fwnode_handle(led); --- a/include/linux/phy.h +++ b/include/linux/phy.h -@@ -1013,6 +1013,39 @@ struct phy_driver { +@@ -1022,6 +1022,39 @@ struct phy_driver { int (*led_blink_set)(struct phy_device *dev, u8 index, unsigned long *delay_on, unsigned long *delay_off); diff --git a/target/linux/generic/pending-6.1/703-phy-add-detach-callback-to-struct-phy_driver.patch b/target/linux/generic/pending-6.1/703-phy-add-detach-callback-to-struct-phy_driver.patch index 8d2803158e..425f82376b 100644 --- a/target/linux/generic/pending-6.1/703-phy-add-detach-callback-to-struct-phy_driver.patch +++ b/target/linux/generic/pending-6.1/703-phy-add-detach-callback-to-struct-phy_driver.patch @@ -23,7 +23,7 @@ Signed-off-by: Gabor Juhos sysfs_remove_link(&dev->dev.kobj, "phydev"); --- a/include/linux/phy.h +++ b/include/linux/phy.h -@@ -878,6 +878,12 @@ struct phy_driver { +@@ -887,6 +887,12 @@ struct phy_driver { /** @handle_interrupt: Override default interrupt handling */ irqreturn_t (*handle_interrupt)(struct phy_device *phydev); -- 2.30.2