From c29d6a83b3c14cf81a4c90a941eb923625192398 Mon Sep 17 00:00:00 2001 From: "nibble.max" Date: Wed, 5 Nov 2014 11:58:38 -0300 Subject: [PATCH] [media] cx23885: add DVBSky S952 support DVBSky S952 dvb-s/s2 dual PCIe card: 1>dvb frontend: M88TS2022(tuner),M88DS3103(demod) 2>PCIe bridge: CX23885(port b: parallel mode, port c: serial mode) 3>rc: cx23885 integrated. Signed-off-by: Nibble Max Reviewed-by: Antti Palosaari Reviewed-by: Olli Salonen Signed-off-by: Mauro Carvalho Chehab --- drivers/media/pci/cx23885/cx23885-cards.c | 22 +++++ drivers/media/pci/cx23885/cx23885-dvb.c | 99 ++++++++++++++++++++++- drivers/media/pci/cx23885/cx23885-input.c | 3 + drivers/media/pci/cx23885/cx23885.h | 1 + 4 files changed, 124 insertions(+), 1 deletion(-) diff --git a/drivers/media/pci/cx23885/cx23885-cards.c b/drivers/media/pci/cx23885/cx23885-cards.c index 4b9cb0795e7e..4bad27d1caa2 100644 --- a/drivers/media/pci/cx23885/cx23885-cards.c +++ b/drivers/media/pci/cx23885/cx23885-cards.c @@ -696,6 +696,11 @@ struct cx23885_board cx23885_boards[] = { .name = "DVBSky S950", .portb = CX23885_MPEG_DVB, }, + [CX23885_BOARD_DVBSKY_S952] = { + .name = "DVBSky S952", + .portb = CX23885_MPEG_DVB, + .portc = CX23885_MPEG_DVB, + }, }; const unsigned int cx23885_bcount = ARRAY_SIZE(cx23885_boards); @@ -971,6 +976,10 @@ struct cx23885_subid cx23885_subids[] = { .subvendor = 0x4254, .subdevice = 0x0950, .card = CX23885_BOARD_DVBSKY_S950, + }, { + .subvendor = 0x4254, + .subdevice = 0x0952, + .card = CX23885_BOARD_DVBSKY_S952, }, }; const unsigned int cx23885_idcount = ARRAY_SIZE(cx23885_subids); @@ -1566,6 +1575,7 @@ void cx23885_gpio_setup(struct cx23885_dev *dev) mdelay(60); break; case CX23885_BOARD_DVBSKY_T9580: + case CX23885_BOARD_DVBSKY_S952: /* enable GPIO3-18 pins */ cx_write(MC417_CTL, 0x00000037); cx23885_gpio_enable(dev, GPIO_2 | GPIO_11, 1); @@ -1697,6 +1707,7 @@ int cx23885_ir_init(struct cx23885_dev *dev) case CX23885_BOARD_DVBSKY_S950C: case CX23885_BOARD_TT_CT2_4500_CI: case CX23885_BOARD_DVBSKY_S950: + case CX23885_BOARD_DVBSKY_S952: if (!enable_885_ir) break; dev->sd_ir = cx23885_find_hw(dev, CX23885_HW_AV_CORE); @@ -1748,6 +1759,7 @@ void cx23885_ir_fini(struct cx23885_dev *dev) case CX23885_BOARD_DVBSKY_S950C: case CX23885_BOARD_TT_CT2_4500_CI: case CX23885_BOARD_DVBSKY_S950: + case CX23885_BOARD_DVBSKY_S952: cx23885_irq_remove(dev, PCI_MSK_AV_CORE); /* sd_ir is a duplicate pointer to the AV Core, just clear it */ dev->sd_ir = NULL; @@ -1800,6 +1812,7 @@ void cx23885_ir_pci_int_enable(struct cx23885_dev *dev) case CX23885_BOARD_DVBSKY_S950C: case CX23885_BOARD_TT_CT2_4500_CI: case CX23885_BOARD_DVBSKY_S950: + case CX23885_BOARD_DVBSKY_S952: if (dev->sd_ir) cx23885_irq_add_enable(dev, PCI_MSK_AV_CORE); break; @@ -1962,6 +1975,14 @@ void cx23885_card_setup(struct cx23885_dev *dev) ts2->ts_clk_en_val = 0x1; /* Enable TS_CLK */ ts2->src_sel_val = CX23885_SRC_SEL_PARALLEL_MPEG_VIDEO; break; + case CX23885_BOARD_DVBSKY_S952: + ts1->gen_ctrl_val = 0x5; /* Parallel */ + ts1->ts_clk_en_val = 0x1; /* Enable TS_CLK */ + ts1->src_sel_val = CX23885_SRC_SEL_PARALLEL_MPEG_VIDEO; + ts2->gen_ctrl_val = 0xe; /* Serial bus */ + ts2->ts_clk_en_val = 0x1; /* Enable TS_CLK */ + ts2->src_sel_val = CX23885_SRC_SEL_PARALLEL_MPEG_VIDEO; + break; case CX23885_BOARD_HAUPPAUGE_HVR1250: case CX23885_BOARD_HAUPPAUGE_HVR1500: case CX23885_BOARD_HAUPPAUGE_HVR1500Q: @@ -2029,6 +2050,7 @@ void cx23885_card_setup(struct cx23885_dev *dev) case CX23885_BOARD_DVBSKY_S950C: case CX23885_BOARD_TT_CT2_4500_CI: case CX23885_BOARD_DVBSKY_S950: + case CX23885_BOARD_DVBSKY_S952: dev->sd_cx25840 = v4l2_i2c_new_subdev(&dev->v4l2_dev, &dev->i2c_bus[2].i2c_adap, "cx25840", 0x88 >> 1, NULL); diff --git a/drivers/media/pci/cx23885/cx23885-dvb.c b/drivers/media/pci/cx23885/cx23885-dvb.c index 3410ab86bcf7..2457b6483a40 100644 --- a/drivers/media/pci/cx23885/cx23885-dvb.c +++ b/drivers/media/pci/cx23885/cx23885-dvb.c @@ -617,6 +617,32 @@ static int dvbsky_t9580_set_voltage(struct dvb_frontend *fe, return 0; } +static int dvbsky_s952_portc_set_voltage(struct dvb_frontend *fe, + fe_sec_voltage_t voltage) +{ + struct cx23885_tsport *port = fe->dvb->priv; + struct cx23885_dev *dev = port->dev; + + cx23885_gpio_enable(dev, GPIO_12 | GPIO_13, 1); + + switch (voltage) { + case SEC_VOLTAGE_13: + cx23885_gpio_set(dev, GPIO_13); + cx23885_gpio_clear(dev, GPIO_12); + break; + case SEC_VOLTAGE_18: + cx23885_gpio_set(dev, GPIO_13); + cx23885_gpio_set(dev, GPIO_12); + break; + case SEC_VOLTAGE_OFF: + cx23885_gpio_clear(dev, GPIO_13); + cx23885_gpio_clear(dev, GPIO_12); + break; + } + /* call the frontend set_voltage function */ + return port->fe_set_voltage(fe, voltage); +} + static int cx23885_sp2_ci_ctrl(void *priv, u8 read, int addr, u8 data, int *mem) { @@ -878,6 +904,19 @@ static const struct m88ds3103_config dvbsky_s950c_m88ds3103_config = { .agc = 0x99, }; +static const struct m88ds3103_config dvbsky_s952_portc_m88ds3103_config = { + .i2c_addr = 0x68, + .clock = 27000000, + .i2c_wr_max = 33, + .clock_out = 0, + .ts_mode = M88DS3103_TS_SERIAL, + .ts_clk = 96000, + .ts_clk_pol = 0, + .lnb_en_pol = 1, + .lnb_hv_pol = 0, + .agc = 0x99, +}; + static int netup_altera_fpga_rw(void *device, int flag, int data, int read) { struct cx23885_dev *dev = (struct cx23885_dev *)device; @@ -1034,6 +1073,8 @@ static int dvb_register(struct cx23885_tsport *port) struct i2c_board_info info; struct i2c_adapter *adapter; struct i2c_client *client_demod = NULL, *client_tuner = NULL, *client_ci = NULL; + const struct m88ds3103_config *p_m88ds3103_config = NULL; + int (*p_set_voltage)(struct dvb_frontend *fe, fe_sec_voltage_t voltage) = NULL; int mfe_shared = 0; /* bus not shared by default */ int ret; @@ -1847,6 +1888,61 @@ static int dvb_register(struct cx23885_tsport *port) fe0->dvb.frontend->ops.read_signal_strength = fe0->dvb.frontend->ops.tuner_ops.get_rf_strength; + port->i2c_client_tuner = client_tuner; + break; + case CX23885_BOARD_DVBSKY_S952: + switch (port->nr) { + /* port b */ + case 1: + i2c_bus = &dev->i2c_bus[1]; + p_m88ds3103_config = &dvbsky_t9580_m88ds3103_config; + p_set_voltage = dvbsky_t9580_set_voltage; + break; + /* port c */ + case 2: + i2c_bus = &dev->i2c_bus[0]; + p_m88ds3103_config = &dvbsky_s952_portc_m88ds3103_config; + p_set_voltage = dvbsky_s952_portc_set_voltage; + break; + } + + /* attach frontend */ + fe0->dvb.frontend = dvb_attach(m88ds3103_attach, + p_m88ds3103_config, + &i2c_bus->i2c_adap, &adapter); + if (fe0->dvb.frontend == NULL) + break; + + /* attach tuner */ + memset(&m88ts2022_config, 0, sizeof(m88ts2022_config)); + m88ts2022_config.fe = fe0->dvb.frontend; + m88ts2022_config.clock = 27000000; + memset(&info, 0, sizeof(struct i2c_board_info)); + strlcpy(info.type, "m88ts2022", I2C_NAME_SIZE); + info.addr = 0x60; + info.platform_data = &m88ts2022_config; + request_module(info.type); + client_tuner = i2c_new_device(adapter, &info); + if (client_tuner == NULL || + client_tuner->dev.driver == NULL) + goto frontend_detach; + if (!try_module_get(client_tuner->dev.driver->owner)) { + i2c_unregister_device(client_tuner); + goto frontend_detach; + } + + /* delegate signal strength measurement to tuner */ + fe0->dvb.frontend->ops.read_signal_strength = + fe0->dvb.frontend->ops.tuner_ops.get_rf_strength; + + /* + * for setting the voltage we need to set GPIOs on + * the card. + */ + port->fe_set_voltage = + fe0->dvb.frontend->ops.set_voltage; + fe0->dvb.frontend->ops.set_voltage = p_set_voltage; + port->i2c_client_tuner = client_tuner; break; default: @@ -1924,7 +2020,8 @@ static int dvb_register(struct cx23885_tsport *port) break; } case CX23885_BOARD_DVBSKY_T9580: - case CX23885_BOARD_DVBSKY_S950: { + case CX23885_BOARD_DVBSKY_S950: + case CX23885_BOARD_DVBSKY_S952: { u8 eeprom[256]; /* 24C02 i2c eeprom */ if (port->nr > 2) diff --git a/drivers/media/pci/cx23885/cx23885-input.c b/drivers/media/pci/cx23885/cx23885-input.c index 7523d0a8ae1d..a1f489444355 100644 --- a/drivers/media/pci/cx23885/cx23885-input.c +++ b/drivers/media/pci/cx23885/cx23885-input.c @@ -92,6 +92,7 @@ void cx23885_input_rx_work_handler(struct cx23885_dev *dev, u32 events) case CX23885_BOARD_DVBSKY_S950C: case CX23885_BOARD_TT_CT2_4500_CI: case CX23885_BOARD_DVBSKY_S950: + case CX23885_BOARD_DVBSKY_S952: /* * The only boards we handle right now. However other boards * using the CX2388x integrated IR controller should be similar @@ -149,6 +150,7 @@ static int cx23885_input_ir_start(struct cx23885_dev *dev) case CX23885_BOARD_DVBSKY_S950C: case CX23885_BOARD_TT_CT2_4500_CI: case CX23885_BOARD_DVBSKY_S950: + case CX23885_BOARD_DVBSKY_S952: /* * The IR controller on this board only returns pulse widths. * Any other mode setting will fail to set up the device. @@ -319,6 +321,7 @@ int cx23885_input_init(struct cx23885_dev *dev) case CX23885_BOARD_DVBSKY_T980C: case CX23885_BOARD_DVBSKY_S950C: case CX23885_BOARD_DVBSKY_S950: + case CX23885_BOARD_DVBSKY_S952: /* Integrated CX23885 IR controller */ driver_type = RC_DRIVER_IR_RAW; allowed_protos = RC_BIT_ALL; diff --git a/drivers/media/pci/cx23885/cx23885.h b/drivers/media/pci/cx23885/cx23885.h index f9cd0da72d02..58c5038c816b 100644 --- a/drivers/media/pci/cx23885/cx23885.h +++ b/drivers/media/pci/cx23885/cx23885.h @@ -97,6 +97,7 @@ #define CX23885_BOARD_DVBSKY_S950C 47 #define CX23885_BOARD_TT_CT2_4500_CI 48 #define CX23885_BOARD_DVBSKY_S950 49 +#define CX23885_BOARD_DVBSKY_S952 50 #define GPIO_0 0x00000001 #define GPIO_1 0x00000002 -- 2.30.2