From c242a47238fa2a6a54af8a16e62b54e6e031d4bc Mon Sep 17 00:00:00 2001 From: Sascha Hauer Date: Wed, 21 May 2014 15:29:44 +0200 Subject: [PATCH] net: phy: genphy: Allow overwriting features of_set_phy_supported allows overwiting hardware capabilities of a phy with values from the devicetree. This does not work with the genphy driver though because the genphys config_init function will overwrite all values adjusted by of_set_phy_supported. Fix this by initialising the genphy features in the phy_driver struct and in config_init just limit the features to the ones the hardware can actually support. The resulting features are a subset of the devicetree specified features and the hardware features. Signed-off-by: Sascha Hauer Signed-off-by: David S. Miller --- drivers/net/phy/phy_device.c | 11 +++++------ 1 file changed, 5 insertions(+), 6 deletions(-) diff --git a/drivers/net/phy/phy_device.c b/drivers/net/phy/phy_device.c index 466ae3e06322..fc569eae7215 100644 --- a/drivers/net/phy/phy_device.c +++ b/drivers/net/phy/phy_device.c @@ -1072,9 +1072,6 @@ int genphy_config_init(struct phy_device *phydev) int val; u32 features; - /* For now, I'll claim that the generic driver supports - * all possible port types - */ features = (SUPPORTED_TP | SUPPORTED_MII | SUPPORTED_AUI | SUPPORTED_FIBRE | SUPPORTED_BNC); @@ -1107,8 +1104,8 @@ int genphy_config_init(struct phy_device *phydev) features |= SUPPORTED_1000baseT_Half; } - phydev->supported = features; - phydev->advertising = features; + phydev->supported &= features; + phydev->advertising &= features; return 0; } @@ -1296,7 +1293,9 @@ static struct phy_driver genphy_driver[] = { .name = "Generic PHY", .soft_reset = genphy_soft_reset, .config_init = genphy_config_init, - .features = 0, + .features = PHY_GBIT_FEATURES | SUPPORTED_MII | + SUPPORTED_AUI | SUPPORTED_FIBRE | + SUPPORTED_BNC, .config_aneg = genphy_config_aneg, .aneg_done = genphy_aneg_done, .read_status = genphy_read_status, -- 2.30.2