From c1a8d0a3accf64a014d605e6806ce05d1c17adf1 Mon Sep 17 00:00:00 2001 From: Grygorii Strashko Date: Wed, 20 Dec 2017 18:45:10 -0600 Subject: [PATCH] net: phy: micrel: ksz9031: reconfigure autoneg after phy autoneg workaround Under some circumstances driver will perform PHY reset in ksz9031_read_status() to fix autoneg failure case (idle error count = 0xFF). When this happens ksz9031 will not detect link status change any more when connecting to Netgear 1G switch (link can be recovered sometimes by restarting netdevice "ifconfig down up"). Reproduced with TI am572x board equipped with ksz9031 PHY while connecting to Netgear 1G switch. Fix the issue by reconfiguring autonegotiation after PHY reset in ksz9031_read_status(). Fixes: d2fd719bcb0e ("net/phy: micrel: Add workaround for bad autoneg") Signed-off-by: Grygorii Strashko Signed-off-by: David S. Miller --- drivers/net/phy/micrel.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/net/phy/micrel.c b/drivers/net/phy/micrel.c index ab4614113403..422ff6333c52 100644 --- a/drivers/net/phy/micrel.c +++ b/drivers/net/phy/micrel.c @@ -624,6 +624,7 @@ static int ksz9031_read_status(struct phy_device *phydev) phydev->link = 0; if (phydev->drv->config_intr && phy_interrupt_is_valid(phydev)) phydev->drv->config_intr(phydev); + return genphy_config_aneg(phydev); } return 0; -- 2.30.2