From c16517d26de30c90dabce1e456615fd7fbdce07c Mon Sep 17 00:00:00 2001
From: Hauke Mehrtens <hauke@hauke-m.de>
Date: Sun, 23 Feb 2020 13:20:11 +0100
Subject: [PATCH] kernel: copy kernel 4.19 code to 5.4

No changes were done to the patches while coping them. Currently they do
not apply on top of kernel 5.4.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
---
 ...dcode-path-to-awk-in-scripts-ld-vers.patch |   30 +
 .../011-kbuild-export-SUBARCH.patch           |   23 +
 .../020-backport_netfilter_rtcache.patch      |  558 ++
 ...inal-flags-for-every-struct-mtd_info.patch |   58 +
 ...ulating-partition-boundaries-when-ch.patch |   55 +
 ...-direct-pointer-to-the-struct-device.patch |  199 +
 ...002-bcma-use-dev_-printing-functions.patch |   36 +
 ...ddress-assignment-via-ifconfig-ioctl.patch |   79 +
 ...s3xxx-use-actual-size-reads-for-PCIe.patch |   46 +
 ...arameters-depend-on-HW-configuration.patch |   63 +
 ...angle-uapi-asm-ptrace.h-from-uapi-as.patch |  280 +
 ...ow_offload-handle-netdevice-events-f.patch |   99 +
 ...w_table-fix-offloaded-connection-tim.patch |  112 +
 ...w_table-fix-up-ct-state-of-flows-aft.patch |   24 +
 ...et-sched-Introduce-act_ctinfo-action.patch |  670 ++
 ...and-winbond-Add-support-for-W25N01GV.patch |   37 +
 ...initial-support-for-Toshiba-TC58CVG2.patch |  188 +
 ...dd-support-for-GigaDevice-GD5FxGQ4xA.patch |  196 +
 ...support-for-all-Toshiba-Memory-produ.patch |  136 +
 ...support-for-GigaDevice-GD5F1GQ4UExxG.patch |  129 +
 ...-spi-nor-Add-support-for-mx25u12835f.patch |   25 +
 ...ne-macros-for-page-read-ops-with-thr.patch |   81 +
 ...-Add-support-for-two-byte-device-IDs.patch |   48 +
 ...support-for-GigaDevice-GD5F1GQ4UFxxG.patch |  197 +
 ...initial-support-for-Paragon-PN26G0xA.patch |  203 +
 ...-call-mac_config-during-resolve-when.patch |   44 +
 ...ink-ensure-inband-AN-works-correctly.patch |   59 +
 ...-helper-for-MACs-which-support-asym-.patch |   49 +
 ...-helper-for-set_pauseparam-for-Asym-.patch |   66 +
 ...t-phy-Stop-with-excessive-soft-reset.patch |   40 +
 ...full-set-of-accessor-functions-to-MM.patch |  375 +
 ...ster-modifying-helpers-returning-1-o.patch |  217 +
 ...dd-genphy_c45_check_and_restart_aneg.patch |   64 +
 ...ve-netdev-from-phylink-mii-ioctl-emu.patch |   59 +
 ...link-support-for-link-gpio-interrupt.patch |   90 +
 ...allow-Clause-45-access-via-mii-ioctl.patch |   77 +
 ...atory-attach-detach-methods-for-sfp-.patch |   94 +
 ...et-sfp-remove-sfp-bus-use-of-netdevs.patch |  118 +
 ...-phylink-avoid-reducing-support-mask.patch |   84 +
 ...-polling-and-interrupt-handling-duri.patch |   94 +
 ...t-start-and-stop-SGMII-PHYs-in-SFP-m.patch |  141 +
 ...ve-fwnode-parsing-into-sfp-bus-layer.patch |  179 +
 ....5-net-sfp-rework-upstream-interface.patch |  254 +
 ...fix-sfp_bus_put-kernel-documentation.patch |   27 +
 ...sfp-fix-sfp_bus_add_upstream-warning.patch |   27 +
 ...-sub-state-machines-into-separate-fu.patch |  124 +
 ...disable-on-device-down-to-main-state.patch |   41 +
 ...e-sfp_sm_ins_next-as-sfp_sm_mod_next.patch |   71 +
 ...-module-remove-outside-state-machine.patch |   53 +
 ...-sfp-rename-T_PROBE_WAIT-to-T_SERIAL.patch |   51 +
 ...-parse-SFP-power-requirement-earlier.patch |  115 +
 ...wer-switch-on-address-change-modules.patch |   65 +
 ...TX_DISABLE-and-phy-only-from-main-st.patch |   52 +
 ...t-the-PHY-probe-from-sfp_sm_mod_init.patch |   53 +
 ...-sfp-eliminate-mdelay-from-PHY-probe.patch |  130 +
 ...ult-processing-to-transition-to-othe.patch |   69 +
 ...X_FAULT-has-deasserted-before-probin.patch |   80 +
 ...stream-s-attachment-state-in-state-m.patch |  153 +
 ...plit-power-mode-switching-from-probe.patch |  184 +
 ...module-insert-reporting-out-of-probe.patch |  159 +
 ...p-to-probe-slow-to-initialise-GPON-m.patch |  110 +
 ...dules-with-slow-diagnostics-to-probe.patch |  198 +
 ...-net-phy-add-core-phylib-sfp-support.patch |  183 +
 ...5-net-phy-marvell10g-add-SFP-support.patch |   67 +
 ...update-to-use-phy_support_asym_pause.patch |   45 +
 ...-matching-all-ones-clause-45-PHY-IDs.patch |   63 +
 ...x-link-mode-modification-in-PHY-mode.patch |   66 +
 ...et-sfp-add-support-for-module-quirks.patch |  111 +
 ...sfp-add-some-quirks-for-GPON-modules.patch |   52 +
 ...-sfp-soft-status-and-control-support.patch |  225 +
 target/linux/generic/config-5.4               | 6101 +++++++++++++++++
 .../generic/hack-5.4/204-module_strip.patch   |  206 +
 .../hack-5.4/207-disable-modorder.patch       |   44 +
 .../hack-5.4/210-darwin_scripts_include.patch | 3053 +++++++++
 .../hack-5.4/212-byteshift_portability.patch  |   65 +
 .../hack-5.4/214-spidev_h_portability.patch   |   24 +
 .../generic/hack-5.4/220-gc_sections.patch    |  192 +
 .../generic/hack-5.4/221-module_exports.patch |  101 +
 .../hack-5.4/230-openwrt_lzma_options.patch   |   71 +
 .../hack-5.4/250-netfilter_depends.patch      |   27 +
 .../generic/hack-5.4/251-sound_kconfig.patch  |  197 +
 .../generic/hack-5.4/259-regmap_dynamic.patch |  110 +
 .../260-crypto_test_dependencies.patch        |   60 +
 .../generic/hack-5.4/280-rfkill-stubs.patch   |   84 +
 ...mem-make-CONFIG_NVMEM-tristate-again.patch |   33 +
 ...cache-use-more-efficient-cache-blast.patch |   66 +
 .../301-mips_image_cmdline_hack.patch         |   38 +
 .../321-powerpc_crtsavres_prereq.patch        |   39 +
 .../generic/hack-5.4/531-debloat_lzma.patch   | 1040 +++
 .../550-loop-Report-EOPNOTSUPP-properly.patch |   41 +
 ...er-discard-support-for-block-devices.patch |  101 +
 .../640-bridge-only-accept-EAP-locally.patch  |   82 +
 ...lter-connmark-introduce-set-dscpmark.patch |  212 +
 .../hack-5.4/647-netfilter-flow-acct.patch    |   70 +
 .../650-netfilter-add-xt_OFFLOAD-target.patch |  553 ++
 .../hack-5.4/651-wireless_mesh_header.patch   |   24 +
 .../hack-5.4/660-fq_codel_defaults.patch      |   27 +
 .../661-use_fq_codel_by_default.patch         |   94 +
 .../hack-5.4/662-remove_pfifo_fast.patch      |  220 +
 .../700-swconfig_switch_drivers.patch         |  140 +
 .../702-phy_add_aneg_done_function.patch      |   27 +
 .../generic/hack-5.4/721-phy_packets.patch    |  176 +
 .../hack-5.4/773-bgmac-add-srab-switch.patch  |   98 +
 .../hack-5.4/901-debloat_sock_diag.patch      |  136 +
 .../generic/hack-5.4/902-debloat_proc.patch   |  405 ++
 .../hack-5.4/904-debloat_dma_buf.patch        |   64 +
 .../generic/hack-5.4/910-kobject_uevent.patch |   32 +
 .../911-kobject_add_broadcast_uevent.patch    |   76 +
 ...ays-create-console-node-in-initramfs.patch |   40 +
 .../linux/generic/hack-5.4/930-crashlog.patch |  338 +
 ...problem-with-platfom-data-in-w1-gpio.patch |   26 +
 ...s-negative-stack-offsets-on-stack-tr.patch |   57 +
 ...f-ath79-Fix-perfcount-IRQ-assignment.patch |  110 +
 .../pending-5.4/110-ehci_hcd_ignore_oc.patch  |   79 +
 ...e_mem_map-with-ARCH_PFN_OFFSET-calcu.patch |   82 +
 ...0-add-linux-spidev-compatible-si3210.patch |   18 +
 ..._value_cansleep-for-setting-chipsele.patch |   20 +
 ...-fix-crash-when-num-chipselects-is-0.patch |   64 +
 ...ame2-and-add-RENAME_WHITEOUT-support.patch |   62 +
 ...41-jffs2-add-RENAME_EXCHANGE-support.patch |   73 +
 ...ge_allow_receiption_on_disabled_port.patch |   45 +
 ...et-phy-at803x-add-support-for-AT8032.patch |   63 +
 .../pending-5.4/201-extra_optimization.patch  |   32 +
 .../203-kallsyms_uncompressed.patch           |  119 +
 .../205-backtrace_module_info.patch           |   45 +
 .../pending-5.4/220-optimize_inlining.patch   |  225 +
 ...e-filenames-from-deps_initramfs-list.patch |   46 +
 ...able_wilink_platform_without_drivers.patch |   20 +
 .../300-mips_expose_boot_raw.patch            |   40 +
 .../302-mips_no_branch_likely.patch           |   22 +
 .../pending-5.4/304-mips_disable_fpu.patch    |  137 +
 .../pending-5.4/305-mips_module_reloc.patch   |  371 +
 .../306-mips_mem_functions_performance.patch  |  106 +
 .../pending-5.4/307-mips_highmem_offset.patch |   19 +
 .../pending-5.4/308-mips32r2_tune.patch       |   22 +
 ...CPU-option-reporting-to-proc-cpuinfo.patch |  142 +
 .../310-arm_module_unresolved_weak_sym.patch  |   22 +
 ...t-command-line-parameters-from-users.patch |  274 +
 .../332-arc-add-OWRTDTB-section.patch         |   84 +
 ...able-unaligned-access-in-kernel-mode.patch |   24 +
 ...ove-no-op-dma_map_ops-where-possible.patch |   82 +
 ...ernel-XZ-compression-option-on-PPC_8.patch |   25 +
 .../400-mtd-add-rootfs-split-support.patch    |  107 +
 ...for-different-partition-parser-types.patch |  142 +
 ...arsers-for-rootfs-and-firmware-split.patch |   44 +
 .../403-mtd-hook-mtdsplit-to-Kbuild.patch     |   32 +
 .../404-mtd-add-more-helper-functions.patch   |   76 +
 .../411-mtd-partial_eraseblock_write.patch    |  132 +
 .../412-mtd-partial_eraseblock_unlock.patch   |   40 +
 ...t-add-of_match_table-with-DT-binding.patch |   31 +
 .../pending-5.4/420-mtd-redboot_space.patch   |   41 +
 ...30-mtd-add-myloader-partition-parser.patch |   47 +
 ...check-for-bad-blocks-when-calculatin.patch |   68 +
 ...bcm47xxpart-detect-T_Meter-partition.patch |   37 +
 .../pending-5.4/440-block2mtd_init.patch      |  116 +
 .../pending-5.4/441-block2mtd_probe.patch     |   47 +
 ...w-NOR-driver-to-write-fewer-bytes-th.patch |   36 +
 ...mtd-cfi_cmdset_0002-no-erase_suspend.patch |   25 +
 ...et_0002-add-buffer-write-cmd-timeout.patch |   17 +
 ...25p80-mx-disable-software-protection.patch |   18 +
 ...or-fix-Spansion-regressions-aliased-.patch |   37 +
 ...ort-limiting-4K-sectors-support-base.patch |   56 +
 ...pi-nor-Add-Winbond-w25q128jv-support.patch |   34 +
 .../476-mtd-spi-nor-add-eon-en25q128.patch    |   18 +
 .../477-mtd-add-spi-nor-add-mx25u3235f.patch  |   18 +
 .../479-mtd-spi-nor-add-eon-en25qh64.patch    |   10 +
 .../479-mtd-spi-nor-add-xtx-xt25f128b.patch   |   42 +
 .../480-mtd-set-rootfs-to-be-root-dev.patch   |   38 +
 ...mtd-device-named-ubi-or-data-on-boot.patch |   97 +
 ...to-create-ubiblock-device-for-rootfs.patch |   66 +
 ...ting-ubi0-rootfs-in-init-do_mounts.c.patch |   51 +
 ...ROOT_DEV-to-ubiblock-rootfs-if-unset.patch |   34 +
 .../494-mtd-ubi-add-EOF-marker-support.patch  |   60 +
 ...-mtd-core-add-get_mtd_device_by_node.patch |   75 +
 ...-add-bindings-for-mtd-concat-devices.patch |   52 +
 ...cat-add-dt-driver-for-concat-devices.patch |  216 +
 .../530-jffs2_make_lzma_available.patch       | 5180 ++++++++++++++
 .../pending-5.4/532-jffs2_eofdetect.patch     |   65 +
 ...-to-create-UBI-FS-version-4-on-empty.patch |   63 +
 .../600-netfilter_conntrack_flush.patch       |   88 +
 ...etfilter_match_bypass_default_checks.patch |  110 +
 ...netfilter_match_bypass_default_table.patch |  106 +
 ...netfilter_match_reduce_memory_access.patch |   22 +
 ...-netfilter_optional_tcp_window_check.patch |   53 +
 .../616-net_optimize_xfrm_calls.patch         |   20 +
 ...del-do-not-defer-queue-length-update.patch |   86 +
 .../pending-5.4/630-packet_socket_type.patch  |  138 +
 ...w_table-add-hardware-offload-support.patch |  564 ++
 ...w_table-support-hw-offload-through-v.patch |  303 +
 ...-support-hardware-flow-table-offload.patch |   60 +
 ...-support-hardware-flow-table-offload.patch |   61 +
 ...-support-hardware-flow-table-offload.patch |  125 +
 ...w_table-rework-hardware-offload-time.patch |   37 +
 ...low_table-rework-private-driver-data.patch |   25 +
 .../pending-5.4/655-increase_skb_pad.patch    |   20 +
 ...Add-support-for-MAP-E-FMRs-mesh-mode.patch |  500 ++
 ...ng-with-source-address-failed-policy.patch |  247 +
 ...nes-for-_POLICY_FAILED-until-all-cod.patch |   50 +
 ...T-skip-GRO-for-foreign-MAC-addresses.patch |  152 +
 .../681-NET-add-of_get_mac_address_mtd.patch  |  133 +
 ...detach-callback-to-struct-phy_driver.patch |   38 +
 ...net-phy-at803x-fix-at8033-sgmii-mode.patch |   51 +
 ...void-tx-fault-with-Nokia-GPON-module.patch |  108 +
 ...ncomplete-100BASE-FX-and-100BASE-LX-.patch |   52 +
 ...nterface-mode-from-ethtool-link-mode.patch |   89 +
 ...p-add-more-extended-compliance-codes.patch |  251 +
 ...le-start-stop-upstream-notifications.patch |  131 +
 ...p-move-phy_start-phy_stop-to-phylink.patch |   72 +
 ...c-add-support-for-Clause-45-accesses.patch |   74 +
 ...ylink-re-split-__phylink_connect_phy.patch |   93 +
 ...upport-Clause-45-PHYs-on-SFP-modules.patch |   89 +
 ...t-link_an_mode-configured-and-curren.patch |  254 +
 ...link-split-phylink_sfp_module_insert.patch |  120 +
 ...y-MAC-configuration-for-copper-SFP-m.patch |  204 +
 ...ke-Broadcom-BCM84881-based-SFPs-work.patch |   58 +
 ...phy-add-Broadcom-BCM84881-PHY-driver.patch |  333 +
 ...t-sfp-add-support-for-Clause-45-PHYs.patch |   94 +
 .../pending-5.4/754-net-sfp-fix-unbind.patch  |   28 +
 .../pending-5.4/755-net-sfp-fix-hwmon.patch   |   44 +
 ...finition-for-the-fault-recovery-atte.patch |   55 +
 .../757-net-sfp-rename-sm_retries.patch       |   60 +
 ...net-sfp-error-handling-for-phy-probe.patch |   97 +
 ...9-net-sfp-re-attempt-probing-for-phy.patch |  132 +
 ...ice-struct-copy-its-DMA-params-to-th.patch |   70 +
 .../810-pci_disable_common_quirks.patch       |   62 +
 .../811-pci_disable_usb_common_quirks.patch   |  115 +
 .../pending-5.4/834-ledtrig-libata.patch      |  149 +
 .../pending-5.4/920-mangle_bootargs.patch     |   71 +
 228 files changed, 38475 insertions(+)
 create mode 100644 target/linux/generic/backport-5.4/010-Kbuild-don-t-hardcode-path-to-awk-in-scripts-ld-vers.patch
 create mode 100644 target/linux/generic/backport-5.4/011-kbuild-export-SUBARCH.patch
 create mode 100644 target/linux/generic/backport-5.4/020-backport_netfilter_rtcache.patch
 create mode 100644 target/linux/generic/backport-5.4/047-v4.21-mtd-keep-original-flags-for-every-struct-mtd_info.patch
 create mode 100644 target/linux/generic/backport-5.4/048-v4.21-mtd-improve-calculating-partition-boundaries-when-ch.patch
 create mode 100644 target/linux/generic/backport-5.4/080-v5.1-0001-bcma-keep-a-direct-pointer-to-the-struct-device.patch
 create mode 100644 target/linux/generic/backport-5.4/080-v5.1-0002-bcma-use-dev_-printing-functions.patch
 create mode 100644 target/linux/generic/backport-5.4/095-Allow-class-e-address-assignment-via-ifconfig-ioctl.patch
 create mode 100644 target/linux/generic/backport-5.4/101-arm-cns3xxx-use-actual-size-reads-for-PCIe.patch
 create mode 100644 target/linux/generic/backport-5.4/200-v5.2-usb-dwc2-Set-lpm-mode-parameters-depend-on-HW-configuration.patch
 create mode 100644 target/linux/generic/backport-5.4/210-arm64-sve-Disentangle-uapi-asm-ptrace.h-from-uapi-as.patch
 create mode 100644 target/linux/generic/backport-5.4/343-netfilter-nft_flow_offload-handle-netdevice-events-f.patch
 create mode 100644 target/linux/generic/backport-5.4/370-netfilter-nf_flow_table-fix-offloaded-connection-tim.patch
 create mode 100644 target/linux/generic/backport-5.4/371-netfilter-nf_flow_table-fix-up-ct-state-of-flows-aft.patch
 create mode 100644 target/linux/generic/backport-5.4/380-v5.3-net-sched-Introduce-act_ctinfo-action.patch
 create mode 100644 target/linux/generic/backport-5.4/450-v5.0-mtd-spinand-winbond-Add-support-for-W25N01GV.patch
 create mode 100644 target/linux/generic/backport-5.4/451-v5.0-mtd-spinand-Add-initial-support-for-Toshiba-TC58CVG2.patch
 create mode 100644 target/linux/generic/backport-5.4/452-v5.0-mtd-spinand-add-support-for-GigaDevice-GD5FxGQ4xA.patch
 create mode 100644 target/linux/generic/backport-5.4/455-v5.1-mtd-spinand-Add-support-for-all-Toshiba-Memory-produ.patch
 create mode 100644 target/linux/generic/backport-5.4/456-v5.1-mtd-spinand-Add-support-for-GigaDevice-GD5F1GQ4UExxG.patch
 create mode 100644 target/linux/generic/backport-5.4/460-v5.0-mtd-spi-nor-Add-support-for-mx25u12835f.patch
 create mode 100644 target/linux/generic/backport-5.4/460-v5.3-mtd-spinand-Define-macros-for-page-read-ops-with-thr.patch
 create mode 100644 target/linux/generic/backport-5.4/461-v5.3-mtd-spinand-Add-support-for-two-byte-device-IDs.patch
 create mode 100644 target/linux/generic/backport-5.4/462-v5.3-mtd-spinand-Add-support-for-GigaDevice-GD5F1GQ4UFxxG.patch
 create mode 100644 target/linux/generic/backport-5.4/463-v5.3-mtd-spinand-Add-initial-support-for-Paragon-PN26G0xA.patch
 create mode 100644 target/linux/generic/backport-5.4/700-v5.1-net-phylink-only-call-mac_config-during-resolve-when.patch
 create mode 100644 target/linux/generic/backport-5.4/701-v5.2-net-phylink-ensure-inband-AN-works-correctly.patch
 create mode 100644 target/linux/generic/backport-5.4/702-v4.20-net-ethernet-Add-helper-for-MACs-which-support-asym-.patch
 create mode 100644 target/linux/generic/backport-5.4/703-v4.20-net-ethernet-Add-helper-for-set_pauseparam-for-Asym-.patch
 create mode 100644 target/linux/generic/backport-5.4/704-v4.20-net-phy-Stop-with-excessive-soft-reset.patch
 create mode 100644 target/linux/generic/backport-5.4/705-v5.1-net-phy-provide-full-set-of-accessor-functions-to-MM.patch
 create mode 100644 target/linux/generic/backport-5.4/706-v5.1-net-phy-add-register-modifying-helpers-returning-1-o.patch
 create mode 100644 target/linux/generic/backport-5.4/707-v5.1-net-phy-add-genphy_c45_check_and_restart_aneg.patch
 create mode 100644 target/linux/generic/backport-5.4/708-v5.3-net-phylink-remove-netdev-from-phylink-mii-ioctl-emu.patch
 create mode 100644 target/linux/generic/backport-5.4/709-v5.3-net-phylink-support-for-link-gpio-interrupt.patch
 create mode 100644 target/linux/generic/backport-5.4/710-v5.3-net-phy-allow-Clause-45-access-via-mii-ioctl.patch
 create mode 100644 target/linux/generic/backport-5.4/711-v5.3-net-sfp-add-mandatory-attach-detach-methods-for-sfp-.patch
 create mode 100644 target/linux/generic/backport-5.4/712-v5.3-net-sfp-remove-sfp-bus-use-of-netdevs.patch
 create mode 100644 target/linux/generic/backport-5.4/713-v5.2-net-phylink-avoid-reducing-support-mask.patch
 create mode 100644 target/linux/generic/backport-5.4/714-v5.3-net-sfp-Stop-SFP-polling-and-interrupt-handling-duri.patch
 create mode 100644 target/linux/generic/backport-5.4/715-v5.3-net-phylink-don-t-start-and-stop-SGMII-PHYs-in-SFP-m.patch
 create mode 100644 target/linux/generic/backport-5.4/716-v5.4-net-sfp-move-fwnode-parsing-into-sfp-bus-layer.patch
 create mode 100644 target/linux/generic/backport-5.4/717-v5.5-net-sfp-rework-upstream-interface.patch
 create mode 100644 target/linux/generic/backport-5.4/718-v5.5-net-sfp-fix-sfp_bus_put-kernel-documentation.patch
 create mode 100644 target/linux/generic/backport-5.4/719-v5.5-net-sfp-fix-sfp_bus_add_upstream-warning.patch
 create mode 100644 target/linux/generic/backport-5.4/720-v5.5-net-sfp-move-sfp-sub-state-machines-into-separate-fu.patch
 create mode 100644 target/linux/generic/backport-5.4/721-v5.5-net-sfp-move-tx-disable-on-device-down-to-main-state.patch
 create mode 100644 target/linux/generic/backport-5.4/722-v5.5-net-sfp-rename-sfp_sm_ins_next-as-sfp_sm_mod_next.patch
 create mode 100644 target/linux/generic/backport-5.4/723-v5.5-net-sfp-handle-module-remove-outside-state-machine.patch
 create mode 100644 target/linux/generic/backport-5.4/724-v5.5-net-sfp-rename-T_PROBE_WAIT-to-T_SERIAL.patch
 create mode 100644 target/linux/generic/backport-5.4/725-v5.5-net-sfp-parse-SFP-power-requirement-earlier.patch
 create mode 100644 target/linux/generic/backport-5.4/726-v5.5-net-sfp-avoid-power-switch-on-address-change-modules.patch
 create mode 100644 target/linux/generic/backport-5.4/727-v5.5-net-sfp-control-TX_DISABLE-and-phy-only-from-main-st.patch
 create mode 100644 target/linux/generic/backport-5.4/728-v5.5-net-sfp-split-the-PHY-probe-from-sfp_sm_mod_init.patch
 create mode 100644 target/linux/generic/backport-5.4/729-v5.5-net-sfp-eliminate-mdelay-from-PHY-probe.patch
 create mode 100644 target/linux/generic/backport-5.4/730-v5.5-net-sfp-allow-fault-processing-to-transition-to-othe.patch
 create mode 100644 target/linux/generic/backport-5.4/731-v5.5-net-sfp-ensure-TX_FAULT-has-deasserted-before-probin.patch
 create mode 100644 target/linux/generic/backport-5.4/732-v5.5-net-sfp-track-upstream-s-attachment-state-in-state-m.patch
 create mode 100644 target/linux/generic/backport-5.4/733-v5.5-net-sfp-split-power-mode-switching-from-probe.patch
 create mode 100644 target/linux/generic/backport-5.4/734-v5.5-net-sfp-move-module-insert-reporting-out-of-probe.patch
 create mode 100644 target/linux/generic/backport-5.4/735-v5.5-net-sfp-allow-sfp-to-probe-slow-to-initialise-GPON-m.patch
 create mode 100644 target/linux/generic/backport-5.4/736-v5.5-net-sfp-allow-modules-with-slow-diagnostics-to-probe.patch
 create mode 100644 target/linux/generic/backport-5.4/737-v5.5-net-phy-add-core-phylib-sfp-support.patch
 create mode 100644 target/linux/generic/backport-5.4/738-v5.5-net-phy-marvell10g-add-SFP-support.patch
 create mode 100644 target/linux/generic/backport-5.4/739-v5.5-net-phylink-update-to-use-phy_support_asym_pause.patch
 create mode 100644 target/linux/generic/backport-5.4/740-v5.5-net-phy-avoid-matching-all-ones-clause-45-PHY-IDs.patch
 create mode 100644 target/linux/generic/backport-5.4/741-v5.5-net-phylink-fix-link-mode-modification-in-PHY-mode.patch
 create mode 100644 target/linux/generic/backport-5.4/742-v5.5-net-sfp-add-support-for-module-quirks.patch
 create mode 100644 target/linux/generic/backport-5.4/743-v5.5-net-sfp-add-some-quirks-for-GPON-modules.patch
 create mode 100644 target/linux/generic/backport-5.4/744-v5.5-net-sfp-soft-status-and-control-support.patch
 create mode 100644 target/linux/generic/config-5.4
 create mode 100644 target/linux/generic/hack-5.4/204-module_strip.patch
 create mode 100644 target/linux/generic/hack-5.4/207-disable-modorder.patch
 create mode 100644 target/linux/generic/hack-5.4/210-darwin_scripts_include.patch
 create mode 100644 target/linux/generic/hack-5.4/212-byteshift_portability.patch
 create mode 100644 target/linux/generic/hack-5.4/214-spidev_h_portability.patch
 create mode 100644 target/linux/generic/hack-5.4/220-gc_sections.patch
 create mode 100644 target/linux/generic/hack-5.4/221-module_exports.patch
 create mode 100644 target/linux/generic/hack-5.4/230-openwrt_lzma_options.patch
 create mode 100644 target/linux/generic/hack-5.4/250-netfilter_depends.patch
 create mode 100644 target/linux/generic/hack-5.4/251-sound_kconfig.patch
 create mode 100644 target/linux/generic/hack-5.4/259-regmap_dynamic.patch
 create mode 100644 target/linux/generic/hack-5.4/260-crypto_test_dependencies.patch
 create mode 100644 target/linux/generic/hack-5.4/280-rfkill-stubs.patch
 create mode 100644 target/linux/generic/hack-5.4/290-nvmem-make-CONFIG_NVMEM-tristate-again.patch
 create mode 100644 target/linux/generic/hack-5.4/300-MIPS-r4k_cache-use-more-efficient-cache-blast.patch
 create mode 100644 target/linux/generic/hack-5.4/301-mips_image_cmdline_hack.patch
 create mode 100644 target/linux/generic/hack-5.4/321-powerpc_crtsavres_prereq.patch
 create mode 100644 target/linux/generic/hack-5.4/531-debloat_lzma.patch
 create mode 100644 target/linux/generic/hack-5.4/550-loop-Report-EOPNOTSUPP-properly.patch
 create mode 100644 target/linux/generic/hack-5.4/551-loop-Better-discard-support-for-block-devices.patch
 create mode 100644 target/linux/generic/hack-5.4/640-bridge-only-accept-EAP-locally.patch
 create mode 100644 target/linux/generic/hack-5.4/645-netfilter-connmark-introduce-set-dscpmark.patch
 create mode 100644 target/linux/generic/hack-5.4/647-netfilter-flow-acct.patch
 create mode 100644 target/linux/generic/hack-5.4/650-netfilter-add-xt_OFFLOAD-target.patch
 create mode 100644 target/linux/generic/hack-5.4/651-wireless_mesh_header.patch
 create mode 100644 target/linux/generic/hack-5.4/660-fq_codel_defaults.patch
 create mode 100644 target/linux/generic/hack-5.4/661-use_fq_codel_by_default.patch
 create mode 100644 target/linux/generic/hack-5.4/662-remove_pfifo_fast.patch
 create mode 100644 target/linux/generic/hack-5.4/700-swconfig_switch_drivers.patch
 create mode 100644 target/linux/generic/hack-5.4/702-phy_add_aneg_done_function.patch
 create mode 100644 target/linux/generic/hack-5.4/721-phy_packets.patch
 create mode 100644 target/linux/generic/hack-5.4/773-bgmac-add-srab-switch.patch
 create mode 100644 target/linux/generic/hack-5.4/901-debloat_sock_diag.patch
 create mode 100644 target/linux/generic/hack-5.4/902-debloat_proc.patch
 create mode 100644 target/linux/generic/hack-5.4/904-debloat_dma_buf.patch
 create mode 100644 target/linux/generic/hack-5.4/910-kobject_uevent.patch
 create mode 100644 target/linux/generic/hack-5.4/911-kobject_add_broadcast_uevent.patch
 create mode 100644 target/linux/generic/hack-5.4/921-always-create-console-node-in-initramfs.patch
 create mode 100644 target/linux/generic/hack-5.4/930-crashlog.patch
 create mode 100644 target/linux/generic/pending-5.4/0931-w1-gpio-fix-problem-with-platfom-data-in-w1-gpio.patch
 create mode 100644 target/linux/generic/pending-5.4/102-MIPS-only-process-negative-stack-offsets-on-stack-tr.patch
 create mode 100644 target/linux/generic/pending-5.4/103-MIPS-perf-ath79-Fix-perfcount-IRQ-assignment.patch
 create mode 100644 target/linux/generic/pending-5.4/110-ehci_hcd_ignore_oc.patch
 create mode 100644 target/linux/generic/pending-5.4/120-Fix-alloc_node_mem_map-with-ARCH_PFN_OFFSET-calcu.patch
 create mode 100644 target/linux/generic/pending-5.4/130-add-linux-spidev-compatible-si3210.patch
 create mode 100644 target/linux/generic/pending-5.4/131-spi-use-gpio_set_value_cansleep-for-setting-chipsele.patch
 create mode 100644 target/linux/generic/pending-5.4/132-spi-spi-gpio-fix-crash-when-num-chipselects-is-0.patch
 create mode 100644 target/linux/generic/pending-5.4/140-jffs2-use-.rename2-and-add-RENAME_WHITEOUT-support.patch
 create mode 100644 target/linux/generic/pending-5.4/141-jffs2-add-RENAME_EXCHANGE-support.patch
 create mode 100644 target/linux/generic/pending-5.4/150-bridge_allow_receiption_on_disabled_port.patch
 create mode 100644 target/linux/generic/pending-5.4/180-net-phy-at803x-add-support-for-AT8032.patch
 create mode 100644 target/linux/generic/pending-5.4/201-extra_optimization.patch
 create mode 100644 target/linux/generic/pending-5.4/203-kallsyms_uncompressed.patch
 create mode 100644 target/linux/generic/pending-5.4/205-backtrace_module_info.patch
 create mode 100644 target/linux/generic/pending-5.4/220-optimize_inlining.patch
 create mode 100644 target/linux/generic/pending-5.4/240-remove-unsane-filenames-from-deps_initramfs-list.patch
 create mode 100644 target/linux/generic/pending-5.4/261-enable_wilink_platform_without_drivers.patch
 create mode 100644 target/linux/generic/pending-5.4/300-mips_expose_boot_raw.patch
 create mode 100644 target/linux/generic/pending-5.4/302-mips_no_branch_likely.patch
 create mode 100644 target/linux/generic/pending-5.4/304-mips_disable_fpu.patch
 create mode 100644 target/linux/generic/pending-5.4/305-mips_module_reloc.patch
 create mode 100644 target/linux/generic/pending-5.4/306-mips_mem_functions_performance.patch
 create mode 100644 target/linux/generic/pending-5.4/307-mips_highmem_offset.patch
 create mode 100644 target/linux/generic/pending-5.4/308-mips32r2_tune.patch
 create mode 100644 target/linux/generic/pending-5.4/309-MIPS-Add-CPU-option-reporting-to-proc-cpuinfo.patch
 create mode 100644 target/linux/generic/pending-5.4/310-arm_module_unresolved_weak_sym.patch
 create mode 100644 target/linux/generic/pending-5.4/330-MIPS-kexec-Accept-command-line-parameters-from-users.patch
 create mode 100644 target/linux/generic/pending-5.4/332-arc-add-OWRTDTB-section.patch
 create mode 100644 target/linux/generic/pending-5.4/333-arc-enable-unaligned-access-in-kernel-mode.patch
 create mode 100644 target/linux/generic/pending-5.4/341-MIPS-mm-remove-no-op-dma_map_ops-where-possible.patch
 create mode 100644 target/linux/generic/pending-5.4/342-powerpc-Enable-kernel-XZ-compression-option-on-PPC_8.patch
 create mode 100644 target/linux/generic/pending-5.4/400-mtd-add-rootfs-split-support.patch
 create mode 100644 target/linux/generic/pending-5.4/401-mtd-add-support-for-different-partition-parser-types.patch
 create mode 100644 target/linux/generic/pending-5.4/402-mtd-use-typed-mtd-parsers-for-rootfs-and-firmware-split.patch
 create mode 100644 target/linux/generic/pending-5.4/403-mtd-hook-mtdsplit-to-Kbuild.patch
 create mode 100644 target/linux/generic/pending-5.4/404-mtd-add-more-helper-functions.patch
 create mode 100644 target/linux/generic/pending-5.4/411-mtd-partial_eraseblock_write.patch
 create mode 100644 target/linux/generic/pending-5.4/412-mtd-partial_eraseblock_unlock.patch
 create mode 100644 target/linux/generic/pending-5.4/419-mtd-redboot-add-of_match_table-with-DT-binding.patch
 create mode 100644 target/linux/generic/pending-5.4/420-mtd-redboot_space.patch
 create mode 100644 target/linux/generic/pending-5.4/430-mtd-add-myloader-partition-parser.patch
 create mode 100644 target/linux/generic/pending-5.4/431-mtd-bcm47xxpart-check-for-bad-blocks-when-calculatin.patch
 create mode 100644 target/linux/generic/pending-5.4/432-mtd-bcm47xxpart-detect-T_Meter-partition.patch
 create mode 100644 target/linux/generic/pending-5.4/440-block2mtd_init.patch
 create mode 100644 target/linux/generic/pending-5.4/441-block2mtd_probe.patch
 create mode 100644 target/linux/generic/pending-5.4/450-mtd-spi-nor-allow-NOR-driver-to-write-fewer-bytes-th.patch
 create mode 100644 target/linux/generic/pending-5.4/460-mtd-cfi_cmdset_0002-no-erase_suspend.patch
 create mode 100644 target/linux/generic/pending-5.4/461-mtd-cfi_cmdset_0002-add-buffer-write-cmd-timeout.patch
 create mode 100644 target/linux/generic/pending-5.4/465-m25p80-mx-disable-software-protection.patch
 create mode 100644 target/linux/generic/pending-5.4/466-Revert-mtd-spi-nor-fix-Spansion-regressions-aliased-.patch
 create mode 100644 target/linux/generic/pending-5.4/470-mtd-spi-nor-support-limiting-4K-sectors-support-base.patch
 create mode 100644 target/linux/generic/pending-5.4/475-mtd-spi-nor-Add-Winbond-w25q128jv-support.patch
 create mode 100644 target/linux/generic/pending-5.4/476-mtd-spi-nor-add-eon-en25q128.patch
 create mode 100644 target/linux/generic/pending-5.4/477-mtd-add-spi-nor-add-mx25u3235f.patch
 create mode 100644 target/linux/generic/pending-5.4/479-mtd-spi-nor-add-eon-en25qh64.patch
 create mode 100644 target/linux/generic/pending-5.4/479-mtd-spi-nor-add-xtx-xt25f128b.patch
 create mode 100644 target/linux/generic/pending-5.4/480-mtd-set-rootfs-to-be-root-dev.patch
 create mode 100644 target/linux/generic/pending-5.4/490-ubi-auto-attach-mtd-device-named-ubi-or-data-on-boot.patch
 create mode 100644 target/linux/generic/pending-5.4/491-ubi-auto-create-ubiblock-device-for-rootfs.patch
 create mode 100644 target/linux/generic/pending-5.4/492-try-auto-mounting-ubi0-rootfs-in-init-do_mounts.c.patch
 create mode 100644 target/linux/generic/pending-5.4/493-ubi-set-ROOT_DEV-to-ubiblock-rootfs-if-unset.patch
 create mode 100644 target/linux/generic/pending-5.4/494-mtd-ubi-add-EOF-marker-support.patch
 create mode 100644 target/linux/generic/pending-5.4/495-mtd-core-add-get_mtd_device_by_node.patch
 create mode 100644 target/linux/generic/pending-5.4/496-dt-bindings-add-bindings-for-mtd-concat-devices.patch
 create mode 100644 target/linux/generic/pending-5.4/497-mtd-mtdconcat-add-dt-driver-for-concat-devices.patch
 create mode 100644 target/linux/generic/pending-5.4/530-jffs2_make_lzma_available.patch
 create mode 100644 target/linux/generic/pending-5.4/532-jffs2_eofdetect.patch
 create mode 100644 target/linux/generic/pending-5.4/553-ubifs-Add-option-to-create-UBI-FS-version-4-on-empty.patch
 create mode 100644 target/linux/generic/pending-5.4/600-netfilter_conntrack_flush.patch
 create mode 100644 target/linux/generic/pending-5.4/610-netfilter_match_bypass_default_checks.patch
 create mode 100644 target/linux/generic/pending-5.4/611-netfilter_match_bypass_default_table.patch
 create mode 100644 target/linux/generic/pending-5.4/612-netfilter_match_reduce_memory_access.patch
 create mode 100644 target/linux/generic/pending-5.4/613-netfilter_optional_tcp_window_check.patch
 create mode 100644 target/linux/generic/pending-5.4/616-net_optimize_xfrm_calls.patch
 create mode 100644 target/linux/generic/pending-5.4/620-net_sched-codel-do-not-defer-queue-length-update.patch
 create mode 100644 target/linux/generic/pending-5.4/630-packet_socket_type.patch
 create mode 100644 target/linux/generic/pending-5.4/640-netfilter-nf_flow_table-add-hardware-offload-support.patch
 create mode 100644 target/linux/generic/pending-5.4/641-netfilter-nf_flow_table-support-hw-offload-through-v.patch
 create mode 100644 target/linux/generic/pending-5.4/642-net-8021q-support-hardware-flow-table-offload.patch
 create mode 100644 target/linux/generic/pending-5.4/643-net-bridge-support-hardware-flow-table-offload.patch
 create mode 100644 target/linux/generic/pending-5.4/644-net-pppoe-support-hardware-flow-table-offload.patch
 create mode 100644 target/linux/generic/pending-5.4/645-netfilter-nf_flow_table-rework-hardware-offload-time.patch
 create mode 100644 target/linux/generic/pending-5.4/646-netfilter-nf_flow_table-rework-private-driver-data.patch
 create mode 100644 target/linux/generic/pending-5.4/655-increase_skb_pad.patch
 create mode 100644 target/linux/generic/pending-5.4/666-Add-support-for-MAP-E-FMRs-mesh-mode.patch
 create mode 100644 target/linux/generic/pending-5.4/670-ipv6-allow-rejecting-with-source-address-failed-policy.patch
 create mode 100644 target/linux/generic/pending-5.4/671-net-provide-defines-for-_POLICY_FAILED-until-all-cod.patch
 create mode 100644 target/linux/generic/pending-5.4/680-NET-skip-GRO-for-foreign-MAC-addresses.patch
 create mode 100644 target/linux/generic/pending-5.4/681-NET-add-of_get_mac_address_mtd.patch
 create mode 100644 target/linux/generic/pending-5.4/703-phy-add-detach-callback-to-struct-phy_driver.patch
 create mode 100644 target/linux/generic/pending-5.4/735-net-phy-at803x-fix-at8033-sgmii-mode.patch
 create mode 100644 target/linux/generic/pending-5.4/739-net-avoid-tx-fault-with-Nokia-GPON-module.patch
 create mode 100644 target/linux/generic/pending-5.4/740-net-sfp-remove-incomplete-100BASE-FX-and-100BASE-LX-.patch
 create mode 100644 target/linux/generic/pending-5.4/741-net-sfp-derive-interface-mode-from-ethtool-link-mode.patch
 create mode 100644 target/linux/generic/pending-5.4/742-net-sfp-add-more-extended-compliance-codes.patch
 create mode 100644 target/linux/generic/pending-5.4/743-net-sfp-add-module-start-stop-upstream-notifications.patch
 create mode 100644 target/linux/generic/pending-5.4/744-net-sfp-move-phy_start-phy_stop-to-phylink.patch
 create mode 100644 target/linux/generic/pending-5.4/745-net-mdio-i2c-add-support-for-Clause-45-accesses.patch
 create mode 100644 target/linux/generic/pending-5.4/746-net-phylink-re-split-__phylink_connect_phy.patch
 create mode 100644 target/linux/generic/pending-5.4/747-net-phylink-support-Clause-45-PHYs-on-SFP-modules.patch
 create mode 100644 target/linux/generic/pending-5.4/748-net-phylink-split-link_an_mode-configured-and-curren.patch
 create mode 100644 target/linux/generic/pending-5.4/749-net-phylink-split-phylink_sfp_module_insert.patch
 create mode 100644 target/linux/generic/pending-5.4/750-net-phylink-delay-MAC-configuration-for-copper-SFP-m.patch
 create mode 100644 target/linux/generic/pending-5.4/751-net-phylink-make-Broadcom-BCM84881-based-SFPs-work.patch
 create mode 100644 target/linux/generic/pending-5.4/752-net-phy-add-Broadcom-BCM84881-PHY-driver.patch
 create mode 100644 target/linux/generic/pending-5.4/753-net-sfp-add-support-for-Clause-45-PHYs.patch
 create mode 100644 target/linux/generic/pending-5.4/754-net-sfp-fix-unbind.patch
 create mode 100644 target/linux/generic/pending-5.4/755-net-sfp-fix-hwmon.patch
 create mode 100644 target/linux/generic/pending-5.4/756-net-sfp-use-a-definition-for-the-fault-recovery-atte.patch
 create mode 100644 target/linux/generic/pending-5.4/757-net-sfp-rename-sm_retries.patch
 create mode 100644 target/linux/generic/pending-5.4/758-net-sfp-error-handling-for-phy-probe.patch
 create mode 100644 target/linux/generic/pending-5.4/759-net-sfp-re-attempt-probing-for-phy.patch
 create mode 100644 target/linux/generic/pending-5.4/800-bcma-get-SoC-device-struct-copy-its-DMA-params-to-th.patch
 create mode 100644 target/linux/generic/pending-5.4/810-pci_disable_common_quirks.patch
 create mode 100644 target/linux/generic/pending-5.4/811-pci_disable_usb_common_quirks.patch
 create mode 100644 target/linux/generic/pending-5.4/834-ledtrig-libata.patch
 create mode 100644 target/linux/generic/pending-5.4/920-mangle_bootargs.patch

diff --git a/target/linux/generic/backport-5.4/010-Kbuild-don-t-hardcode-path-to-awk-in-scripts-ld-vers.patch b/target/linux/generic/backport-5.4/010-Kbuild-don-t-hardcode-path-to-awk-in-scripts-ld-vers.patch
new file mode 100644
index 0000000000..7ac4f9d240
--- /dev/null
+++ b/target/linux/generic/backport-5.4/010-Kbuild-don-t-hardcode-path-to-awk-in-scripts-ld-vers.patch
@@ -0,0 +1,30 @@
+From 13b1ecc3401653a355798eb1dee10cc1608202f4 Mon Sep 17 00:00:00 2001
+From: Felix Fietkau <nbd@nbd.name>
+Date: Mon, 18 Jan 2016 12:27:49 +0100
+Subject: [PATCH 33/34] Kbuild: don't hardcode path to awk in
+ scripts/ld-version.sh
+
+On some systems /usr/bin/awk does not exist, or is broken. Find it via
+$PATH instead.
+
+Signed-off-by: Felix Fietkau <nbd@nbd.name>
+---
+ scripts/ld-version.sh | 4 +++-
+ 1 file changed, 3 insertions(+), 1 deletion(-)
+
+--- a/scripts/ld-version.sh
++++ b/scripts/ld-version.sh
+@@ -1,6 +1,7 @@
+-#!/usr/bin/awk -f
++#!/bin/sh
+ # SPDX-License-Identifier: GPL-2.0
+ # extract linker version number from stdin and turn into single number
++exec awk '
+ 	{
+ 	gsub(".*\\)", "");
+ 	gsub(".*version ", "");
+@@ -9,3 +10,4 @@
+ 	print a[1]*100000000 + a[2]*1000000 + a[3]*10000;
+ 	exit
+ 	}
++'
diff --git a/target/linux/generic/backport-5.4/011-kbuild-export-SUBARCH.patch b/target/linux/generic/backport-5.4/011-kbuild-export-SUBARCH.patch
new file mode 100644
index 0000000000..a42c720446
--- /dev/null
+++ b/target/linux/generic/backport-5.4/011-kbuild-export-SUBARCH.patch
@@ -0,0 +1,23 @@
+From 173019b66dcc9d68ad9333aa744dad1e369b5aa8 Mon Sep 17 00:00:00 2001
+From: Felix Fietkau <nbd@nbd.name>
+Date: Sun, 9 Jul 2017 00:26:53 +0200
+Subject: [PATCH 34/34] kernel: add compile fix for linux 4.9 on x86
+
+Signed-off-by: Felix Fietkau <nbd@nbd.name>
+---
+ Makefile | 4 ++--
+ 1 file changed, 2 insertions(+), 2 deletions(-)
+
+--- a/Makefile
++++ b/Makefile
+@@ -432,8 +432,8 @@ KBUILD_LDFLAGS :=
+ GCC_PLUGINS_CFLAGS :=
+ CLANG_FLAGS :=
+ 
+-export ARCH SRCARCH CONFIG_SHELL HOSTCC KBUILD_HOSTCFLAGS CROSS_COMPILE AS LD CC
+-export CPP AR NM STRIP OBJCOPY OBJDUMP KBUILD_HOSTLDFLAGS KBUILD_HOSTLDLIBS
++export ARCH SRCARCH SUBARCH CONFIG_SHELL HOSTCC KBUILD_HOSTCFLAGS CROSS_COMPILE AS LD
++export CC CPP AR NM STRIP OBJCOPY OBJDUMP KBUILD_HOSTLDFLAGS KBUILD_HOSTLDLIBS
+ export MAKE LEX YACC AWK GENKSYMS INSTALLKERNEL PERL PYTHON PYTHON2 PYTHON3 UTS_MACHINE
+ export HOSTCXX KBUILD_HOSTCXXFLAGS LDFLAGS_MODULE CHECK CHECKFLAGS
+ 
diff --git a/target/linux/generic/backport-5.4/020-backport_netfilter_rtcache.patch b/target/linux/generic/backport-5.4/020-backport_netfilter_rtcache.patch
new file mode 100644
index 0000000000..c02b8f39e0
--- /dev/null
+++ b/target/linux/generic/backport-5.4/020-backport_netfilter_rtcache.patch
@@ -0,0 +1,558 @@
+From 1bb0c3ec899827cfa4668bb63a08713a40744d21 Mon Sep 17 00:00:00 2001
+From: Florian Westphal <fw@strlen.de>
+Date: Sun, 9 Jul 2017 08:58:30 +0200
+Subject: [PATCH] netfilter: conntrack: cache route for forwarded connections
+
+... to avoid per-packet FIB lookup if possible.
+
+The cached dst is re-used provided the input interface
+is the same as that of the previous packet in the same direction.
+
+If not, the cached dst is invalidated.
+
+For ipv6 we also need to store sernum, else dst_check doesn't work,
+pointed out by Eric Dumazet.
+
+This should speed up forwarding when conntrack is already in use
+anyway, especially when using reverse path filtering -- active RPF
+enforces two FIB lookups for each packet.
+
+Before the routing cache removal this didn't matter since RPF was performed
+only when route cache didn't yield a result; but without route cache it
+comes at higher price.
+
+Julian Anastasov suggested to add NETDEV_UNREGISTER handler to
+avoid holding on to dsts of 'frozen' conntracks.
+
+Signed-off-by: Florian Westphal <fw@strlen.de>
+---
+ include/net/netfilter/nf_conntrack_extend.h  |   4 +
+ include/net/netfilter/nf_conntrack_rtcache.h |  34 +++
+ net/netfilter/Kconfig                        |  12 +
+ net/netfilter/Makefile                       |   3 +
+ net/netfilter/nf_conntrack_rtcache.c         | 428 +++++++++++++++++++++++++++
+ 5 files changed, 481 insertions(+)
+ create mode 100644 include/net/netfilter/nf_conntrack_rtcache.h
+ create mode 100644 net/netfilter/nf_conntrack_rtcache.c
+
+--- a/include/net/netfilter/nf_conntrack_extend.h
++++ b/include/net/netfilter/nf_conntrack_extend.h
+@@ -28,6 +28,9 @@ enum nf_ct_ext_id {
+ #if IS_ENABLED(CONFIG_NETFILTER_SYNPROXY)
+ 	NF_CT_EXT_SYNPROXY,
+ #endif
++#if IS_ENABLED(CONFIG_NF_CONNTRACK_RTCACHE)
++	NF_CT_EXT_RTCACHE,
++#endif
+ 	NF_CT_EXT_NUM,
+ };
+ 
+@@ -40,6 +43,7 @@ enum nf_ct_ext_id {
+ #define NF_CT_EXT_TIMEOUT_TYPE struct nf_conn_timeout
+ #define NF_CT_EXT_LABELS_TYPE struct nf_conn_labels
+ #define NF_CT_EXT_SYNPROXY_TYPE struct nf_conn_synproxy
++#define NF_CT_EXT_RTCACHE_TYPE struct nf_conn_rtcache
+ 
+ /* Extensions: optional stuff which isn't permanently in struct. */
+ struct nf_ct_ext {
+--- /dev/null
++++ b/include/net/netfilter/nf_conntrack_rtcache.h
+@@ -0,0 +1,34 @@
++#include <linux/gfp.h>
++#include <net/netfilter/nf_conntrack.h>
++#include <net/netfilter/nf_conntrack_extend.h>
++
++struct dst_entry;
++
++struct nf_conn_dst_cache {
++	struct dst_entry *dst;
++	int iif;
++#if IS_ENABLED(CONFIG_NF_CONNTRACK_IPV6)
++	u32 cookie;
++#endif
++
++};
++
++struct nf_conn_rtcache {
++	struct nf_conn_dst_cache cached_dst[IP_CT_DIR_MAX];
++};
++
++static inline
++struct nf_conn_rtcache *nf_ct_rtcache_find(const struct nf_conn *ct)
++{
++#if IS_ENABLED(CONFIG_NF_CONNTRACK_RTCACHE)
++	return nf_ct_ext_find(ct, NF_CT_EXT_RTCACHE);
++#else
++	return NULL;
++#endif
++}
++
++static inline int nf_conn_rtcache_iif_get(const struct nf_conn_rtcache *rtc,
++					  enum ip_conntrack_dir dir)
++{
++	return rtc->cached_dst[dir].iif;
++}
+--- a/net/netfilter/Kconfig
++++ b/net/netfilter/Kconfig
+@@ -135,6 +135,18 @@ config NF_CONNTRACK_EVENTS
+ 
+ 	  If unsure, say `N'.
+ 
++config NF_CONNTRACK_RTCACHE
++	tristate "Cache route entries in conntrack objects"
++	depends on NETFILTER_ADVANCED
++	depends on NF_CONNTRACK
++	help
++	  If this option is enabled, the connection tracking code will
++	  cache routing information for each connection that is being
++	  forwarded, at a cost of 32 bytes per conntrack object.
++
++	  To compile it as a module, choose M here.  If unsure, say N.
++	  The module will be called nf_conntrack_rtcache.
++
+ config NF_CONNTRACK_TIMEOUT
+ 	bool  'Connection tracking timeout'
+ 	depends on NETFILTER_ADVANCED
+--- a/net/netfilter/Makefile
++++ b/net/netfilter/Makefile
+@@ -25,6 +25,9 @@ obj-$(CONFIG_NETFILTER_NETLINK_OSF) += n
+ # connection tracking
+ obj-$(CONFIG_NF_CONNTRACK) += nf_conntrack.o
+ 
++# optional conntrack route cache extension
++obj-$(CONFIG_NF_CONNTRACK_RTCACHE) += nf_conntrack_rtcache.o
++
+ obj-$(CONFIG_NF_CT_PROTO_GRE) += nf_conntrack_proto_gre.o
+ 
+ # netlink interface for nf_conntrack
+--- /dev/null
++++ b/net/netfilter/nf_conntrack_rtcache.c
+@@ -0,0 +1,428 @@
++/* route cache for netfilter.
++ *
++ * (C) 2014 Red Hat GmbH
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License version 2 as
++ * published by the Free Software Foundation.
++ */
++
++#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
++
++#include <linux/types.h>
++#include <linux/netfilter.h>
++#include <linux/skbuff.h>
++#include <linux/stddef.h>
++#include <linux/kernel.h>
++#include <linux/netdevice.h>
++#include <linux/export.h>
++#include <linux/module.h>
++
++#include <net/dst.h>
++
++#include <net/netfilter/nf_conntrack.h>
++#include <net/netfilter/nf_conntrack_core.h>
++#include <net/netfilter/nf_conntrack_extend.h>
++#include <net/netfilter/nf_conntrack_rtcache.h>
++
++#if IS_ENABLED(CONFIG_NF_CONNTRACK_IPV6)
++#include <net/ip6_fib.h>
++#endif
++
++static void __nf_conn_rtcache_destroy(struct nf_conn_rtcache *rtc,
++				      enum ip_conntrack_dir dir)
++{
++	struct dst_entry *dst = rtc->cached_dst[dir].dst;
++
++	dst_release(dst);
++}
++
++static void nf_conn_rtcache_destroy(struct nf_conn *ct)
++{
++	struct nf_conn_rtcache *rtc = nf_ct_rtcache_find(ct);
++
++	if (!rtc)
++		return;
++
++	__nf_conn_rtcache_destroy(rtc, IP_CT_DIR_ORIGINAL);
++	__nf_conn_rtcache_destroy(rtc, IP_CT_DIR_REPLY);
++}
++
++static void nf_ct_rtcache_ext_add(struct nf_conn *ct)
++{
++	struct nf_conn_rtcache *rtc;
++
++	rtc = nf_ct_ext_add(ct, NF_CT_EXT_RTCACHE, GFP_ATOMIC);
++	if (rtc) {
++		rtc->cached_dst[IP_CT_DIR_ORIGINAL].iif = -1;
++		rtc->cached_dst[IP_CT_DIR_ORIGINAL].dst = NULL;
++		rtc->cached_dst[IP_CT_DIR_REPLY].iif = -1;
++		rtc->cached_dst[IP_CT_DIR_REPLY].dst = NULL;
++	}
++}
++
++static struct nf_conn_rtcache *nf_ct_rtcache_find_usable(struct nf_conn *ct)
++{
++	return nf_ct_rtcache_find(ct);
++}
++
++static struct dst_entry *
++nf_conn_rtcache_dst_get(const struct nf_conn_rtcache *rtc,
++			enum ip_conntrack_dir dir)
++{
++	return rtc->cached_dst[dir].dst;
++}
++
++static u32 nf_rtcache_get_cookie(int pf, const struct dst_entry *dst)
++{
++#if IS_ENABLED(CONFIG_NF_CONNTRACK_IPV6)
++	if (pf == NFPROTO_IPV6) {
++		const struct rt6_info *rt = (const struct rt6_info *)dst;
++
++		if (rt->from && rt->from->fib6_node)
++			return (u32)rt->from->fib6_node->fn_sernum;
++	}
++#endif
++	return 0;
++}
++
++static void nf_conn_rtcache_dst_set(int pf,
++				    struct nf_conn_rtcache *rtc,
++				    struct dst_entry *dst,
++				    enum ip_conntrack_dir dir, int iif)
++{
++	if (rtc->cached_dst[dir].iif != iif)
++		rtc->cached_dst[dir].iif = iif;
++
++	if (rtc->cached_dst[dir].dst != dst) {
++		struct dst_entry *old;
++
++		dst_hold(dst);
++
++		old = xchg(&rtc->cached_dst[dir].dst, dst);
++		dst_release(old);
++
++#if IS_ENABLED(CONFIG_NF_CONNTRACK_IPV6)
++		if (pf == NFPROTO_IPV6)
++			rtc->cached_dst[dir].cookie =
++				nf_rtcache_get_cookie(pf, dst);
++#endif
++	}
++}
++
++static void nf_conn_rtcache_dst_obsolete(struct nf_conn_rtcache *rtc,
++					 enum ip_conntrack_dir dir)
++{
++	struct dst_entry *old;
++
++	pr_debug("Invalidate iif %d for dir %d on cache %p\n",
++		 rtc->cached_dst[dir].iif, dir, rtc);
++
++	old = xchg(&rtc->cached_dst[dir].dst, NULL);
++	dst_release(old);
++	rtc->cached_dst[dir].iif = -1;
++}
++
++static unsigned int nf_rtcache_in(u_int8_t pf,
++				  struct sk_buff *skb,
++				  const struct nf_hook_state *state)
++{
++	struct nf_conn_rtcache *rtc;
++	enum ip_conntrack_info ctinfo;
++	enum ip_conntrack_dir dir;
++	struct dst_entry *dst;
++	struct nf_conn *ct;
++	int iif;
++	u32 cookie;
++
++	if (skb_dst(skb) || skb->sk)
++		return NF_ACCEPT;
++
++	ct = nf_ct_get(skb, &ctinfo);
++	if (!ct)
++		return NF_ACCEPT;
++
++	rtc = nf_ct_rtcache_find_usable(ct);
++	if (!rtc)
++		return NF_ACCEPT;
++
++	/* if iif changes, don't use cache and let ip stack
++	 * do route lookup.
++	 *
++	 * If rp_filter is enabled it might toss skb, so
++	 * we don't want to avoid these checks.
++	 */
++	dir = CTINFO2DIR(ctinfo);
++	iif = nf_conn_rtcache_iif_get(rtc, dir);
++	if (state->in->ifindex != iif) {
++		pr_debug("ct %p, iif %d, cached iif %d, skip cached entry\n",
++			 ct, iif, state->in->ifindex);
++		return NF_ACCEPT;
++	}
++	dst = nf_conn_rtcache_dst_get(rtc, dir);
++	if (dst == NULL)
++		return NF_ACCEPT;
++
++	cookie = nf_rtcache_get_cookie(pf, dst);
++
++	dst = dst_check(dst, cookie);
++	pr_debug("obtained dst %p for skb %p, cookie %d\n", dst, skb, cookie);
++	if (likely(dst))
++		skb_dst_set_noref(skb, dst);
++	else
++		nf_conn_rtcache_dst_obsolete(rtc, dir);
++
++	return NF_ACCEPT;
++}
++
++static unsigned int nf_rtcache_forward(u_int8_t pf,
++				       struct sk_buff *skb,
++				       const struct nf_hook_state *state)
++{
++	struct nf_conn_rtcache *rtc;
++	enum ip_conntrack_info ctinfo;
++	enum ip_conntrack_dir dir;
++	struct nf_conn *ct;
++	struct dst_entry *dst = skb_dst(skb);
++	int iif;
++
++	ct = nf_ct_get(skb, &ctinfo);
++	if (!ct)
++		return NF_ACCEPT;
++
++	if (dst && dst_xfrm(dst))
++		return NF_ACCEPT;
++
++	if (!nf_ct_is_confirmed(ct)) {
++		if (WARN_ON(nf_ct_rtcache_find(ct)))
++			return NF_ACCEPT;
++		nf_ct_rtcache_ext_add(ct);
++		return NF_ACCEPT;
++	}
++
++	rtc = nf_ct_rtcache_find_usable(ct);
++	if (!rtc)
++		return NF_ACCEPT;
++
++	dir = CTINFO2DIR(ctinfo);
++	iif = nf_conn_rtcache_iif_get(rtc, dir);
++	pr_debug("ct %p, skb %p, dir %d, iif %d, cached iif %d\n",
++		 ct, skb, dir, iif, state->in->ifindex);
++	if (likely(state->in->ifindex == iif))
++		return NF_ACCEPT;
++
++	nf_conn_rtcache_dst_set(pf, rtc, skb_dst(skb), dir, state->in->ifindex);
++	return NF_ACCEPT;
++}
++
++static unsigned int nf_rtcache_in4(void *priv,
++				  struct sk_buff *skb,
++				  const struct nf_hook_state *state)
++{
++	return nf_rtcache_in(NFPROTO_IPV4, skb, state);
++}
++
++static unsigned int nf_rtcache_forward4(void *priv,
++				       struct sk_buff *skb,
++				       const struct nf_hook_state *state)
++{
++	return nf_rtcache_forward(NFPROTO_IPV4, skb, state);
++}
++
++#if IS_ENABLED(CONFIG_NF_CONNTRACK_IPV6)
++static unsigned int nf_rtcache_in6(void *priv,
++				  struct sk_buff *skb,
++				  const struct nf_hook_state *state)
++{
++	return nf_rtcache_in(NFPROTO_IPV6, skb, state);
++}
++
++static unsigned int nf_rtcache_forward6(void *priv,
++				       struct sk_buff *skb,
++				       const struct nf_hook_state *state)
++{
++ 	return nf_rtcache_forward(NFPROTO_IPV6, skb, state);
++}
++#endif
++
++static int nf_rtcache_dst_remove(struct nf_conn *ct, void *data)
++{
++	struct nf_conn_rtcache *rtc = nf_ct_rtcache_find(ct);
++	struct net_device *dev = data;
++
++	if (!rtc)
++		return 0;
++
++	if (dev->ifindex == rtc->cached_dst[IP_CT_DIR_ORIGINAL].iif ||
++	    dev->ifindex == rtc->cached_dst[IP_CT_DIR_REPLY].iif) {
++		nf_conn_rtcache_dst_obsolete(rtc, IP_CT_DIR_ORIGINAL);
++		nf_conn_rtcache_dst_obsolete(rtc, IP_CT_DIR_REPLY);
++	}
++
++	return 0;
++}
++
++static int nf_rtcache_netdev_event(struct notifier_block *this,
++				   unsigned long event, void *ptr)
++{
++	struct net_device *dev = netdev_notifier_info_to_dev(ptr);
++	struct net *net = dev_net(dev);
++
++	if (event == NETDEV_DOWN)
++		nf_ct_iterate_cleanup_net(net, nf_rtcache_dst_remove, dev, 0, 0);
++
++	return NOTIFY_DONE;
++}
++
++static struct notifier_block nf_rtcache_notifier = {
++	.notifier_call = nf_rtcache_netdev_event,
++};
++
++static struct nf_hook_ops rtcache_ops[] = {
++	{
++		.hook		= nf_rtcache_in4,
++		.pf		= NFPROTO_IPV4,
++		.hooknum	= NF_INET_PRE_ROUTING,
++		.priority       = NF_IP_PRI_LAST,
++	},
++	{
++		.hook           = nf_rtcache_forward4,
++		.pf             = NFPROTO_IPV4,
++		.hooknum        = NF_INET_FORWARD,
++		.priority       = NF_IP_PRI_LAST,
++	},
++#if IS_ENABLED(CONFIG_NF_CONNTRACK_IPV6)
++	{
++		.hook		= nf_rtcache_in6,
++		.pf		= NFPROTO_IPV6,
++		.hooknum	= NF_INET_PRE_ROUTING,
++		.priority       = NF_IP_PRI_LAST,
++	},
++	{
++		.hook           = nf_rtcache_forward6,
++		.pf             = NFPROTO_IPV6,
++		.hooknum        = NF_INET_FORWARD,
++		.priority       = NF_IP_PRI_LAST,
++	},
++#endif
++};
++
++static struct nf_ct_ext_type rtcache_extend __read_mostly = {
++	.len	= sizeof(struct nf_conn_rtcache),
++	.align	= __alignof__(struct nf_conn_rtcache),
++	.id	= NF_CT_EXT_RTCACHE,
++	.destroy = nf_conn_rtcache_destroy,
++};
++
++static int __net_init rtcache_net_init(struct net *net)
++{
++	return nf_register_net_hooks(net, rtcache_ops, ARRAY_SIZE(rtcache_ops));
++}
++
++static void __net_exit rtcache_net_exit(struct net *net)
++{
++	/* remove hooks so no new connections get rtcache extension */
++	nf_unregister_net_hooks(net, rtcache_ops, ARRAY_SIZE(rtcache_ops));
++}
++
++static struct pernet_operations rtcache_ops_net_ops = {
++	.init	= rtcache_net_init,
++	.exit	= rtcache_net_exit,
++};
++
++static int __init nf_conntrack_rtcache_init(void)
++{
++	int ret = nf_ct_extend_register(&rtcache_extend);
++
++	if (ret < 0) {
++		pr_err("nf_conntrack_rtcache: Unable to register extension\n");
++		return ret;
++	}
++
++	ret = register_pernet_subsys(&rtcache_ops_net_ops);
++	if (ret) {
++		nf_ct_extend_unregister(&rtcache_extend);
++		return ret;
++	}
++
++	ret = register_netdevice_notifier(&nf_rtcache_notifier);
++	if (ret) {
++		nf_ct_extend_unregister(&rtcache_extend);
++		unregister_pernet_subsys(&rtcache_ops_net_ops);
++	}
++
++	return ret;
++}
++
++static int nf_rtcache_ext_remove(struct nf_conn *ct, void *data)
++{
++	struct nf_conn_rtcache *rtc = nf_ct_rtcache_find(ct);
++
++	return rtc != NULL;
++}
++
++static bool __exit nf_conntrack_rtcache_wait_for_dying(struct net *net)
++{
++	bool wait = false;
++	int cpu;
++
++	for_each_possible_cpu(cpu) {
++		struct nf_conntrack_tuple_hash *h;
++		struct hlist_nulls_node *n;
++		struct nf_conn *ct;
++		struct ct_pcpu *pcpu = per_cpu_ptr(net->ct.pcpu_lists, cpu);
++
++		rcu_read_lock();
++		spin_lock_bh(&pcpu->lock);
++
++		hlist_nulls_for_each_entry(h, n, &pcpu->dying, hnnode) {
++			ct = nf_ct_tuplehash_to_ctrack(h);
++			if (nf_ct_rtcache_find(ct) != NULL) {
++				wait = true;
++				break;
++			}
++		}
++		spin_unlock_bh(&pcpu->lock);
++		rcu_read_unlock();
++	}
++
++	return wait;
++}
++
++static void __exit nf_conntrack_rtcache_fini(void)
++{
++	struct net *net;
++	int count = 0;
++
++	synchronize_net();
++
++	unregister_netdevice_notifier(&nf_rtcache_notifier);
++	unregister_pernet_subsys(&rtcache_ops_net_ops);
++
++	synchronize_net();
++
++	rtnl_lock();
++
++	/* zap all conntracks with rtcache extension */
++	for_each_net(net)
++		nf_ct_iterate_cleanup_net(net, nf_rtcache_ext_remove, NULL, 0, 0);
++
++	for_each_net(net) {
++		/* .. and make sure they're gone from dying list, too */
++		while (nf_conntrack_rtcache_wait_for_dying(net)) {
++			msleep(200);
++			WARN_ONCE(++count > 25, "Waiting for all rtcache conntracks to go away\n");
++		}
++	}
++
++	rtnl_unlock();
++
++	synchronize_net();
++	nf_ct_extend_unregister(&rtcache_extend);
++}
++module_init(nf_conntrack_rtcache_init);
++module_exit(nf_conntrack_rtcache_fini);
++
++MODULE_LICENSE("GPL");
++MODULE_AUTHOR("Florian Westphal <fw@strlen.de>");
++MODULE_DESCRIPTION("Conntrack route cache extension");
diff --git a/target/linux/generic/backport-5.4/047-v4.21-mtd-keep-original-flags-for-every-struct-mtd_info.patch b/target/linux/generic/backport-5.4/047-v4.21-mtd-keep-original-flags-for-every-struct-mtd_info.patch
new file mode 100644
index 0000000000..d587c9ec07
--- /dev/null
+++ b/target/linux/generic/backport-5.4/047-v4.21-mtd-keep-original-flags-for-every-struct-mtd_info.patch
@@ -0,0 +1,58 @@
+From 1186af457cc186c5ed01708da71b1ffbdf0a2638 Mon Sep 17 00:00:00 2001
+From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <rafal@milecki.pl>
+Date: Tue, 20 Nov 2018 09:55:45 +0100
+Subject: [PATCH] mtd: keep original flags for every struct mtd_info
+MIME-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+
+When allocating a new partition mtd subsystem runs internal tests in the
+allocate_partition(). They may result in modifying specified flags (e.g.
+dropping some /features/ like write access).
+
+Those constraints don't have to be necessary true for subpartitions. It
+may happen parent partition isn't block aligned (effectively disabling
+write access) while subpartition may fit blocks nicely. In such case all
+checks should be run again (starting with original flags value).
+
+Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
+Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com>
+---
+ drivers/mtd/mtdcore.c   | 2 ++
+ drivers/mtd/mtdpart.c   | 3 ++-
+ include/linux/mtd/mtd.h | 1 +
+ 3 files changed, 5 insertions(+), 1 deletion(-)
+
+--- a/drivers/mtd/mtdcore.c
++++ b/drivers/mtd/mtdcore.c
+@@ -665,6 +665,8 @@ static void mtd_set_dev_defaults(struct
+ 	} else {
+ 		pr_debug("mtd device won't show a device symlink in sysfs\n");
+ 	}
++
++	mtd->orig_flags = mtd->flags;
+ }
+ 
+ /**
+--- a/drivers/mtd/mtdpart.c
++++ b/drivers/mtd/mtdpart.c
+@@ -346,7 +346,8 @@ static struct mtd_part *allocate_partiti
+ 
+ 	/* set up the MTD object for this partition */
+ 	slave->mtd.type = parent->type;
+-	slave->mtd.flags = parent->flags & ~part->mask_flags;
++	slave->mtd.flags = parent->orig_flags & ~part->mask_flags;
++	slave->mtd.orig_flags = slave->mtd.flags;
+ 	slave->mtd.size = part->size;
+ 	slave->mtd.writesize = parent->writesize;
+ 	slave->mtd.writebufsize = parent->writebufsize;
+--- a/include/linux/mtd/mtd.h
++++ b/include/linux/mtd/mtd.h
+@@ -207,6 +207,7 @@ struct mtd_debug_info {
+ struct mtd_info {
+ 	u_char type;
+ 	uint32_t flags;
++	uint32_t orig_flags; /* Flags as before running mtd checks */
+ 	uint64_t size;	 // Total size of the MTD
+ 
+ 	/* "Major" erase size for the device. Naïve users may take this
diff --git a/target/linux/generic/backport-5.4/048-v4.21-mtd-improve-calculating-partition-boundaries-when-ch.patch b/target/linux/generic/backport-5.4/048-v4.21-mtd-improve-calculating-partition-boundaries-when-ch.patch
new file mode 100644
index 0000000000..02296276b0
--- /dev/null
+++ b/target/linux/generic/backport-5.4/048-v4.21-mtd-improve-calculating-partition-boundaries-when-ch.patch
@@ -0,0 +1,55 @@
+From 6750f61a13a0197c40e4a40739117493b15f19e8 Mon Sep 17 00:00:00 2001
+From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <rafal@milecki.pl>
+Date: Tue, 20 Nov 2018 10:24:09 +0100
+Subject: [PATCH] mtd: improve calculating partition boundaries when checking
+ for alignment
+MIME-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+
+When checking for alignment mtd should check absolute offsets. It's
+important for subpartitions as it doesn't make sense to check their
+relative addresses.
+
+Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
+Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com>
+---
+ drivers/mtd/mtdpart.c | 13 +++++++++++--
+ 1 file changed, 11 insertions(+), 2 deletions(-)
+
+--- a/drivers/mtd/mtdpart.c
++++ b/drivers/mtd/mtdpart.c
+@@ -61,6 +61,15 @@ static inline struct mtd_part *mtd_to_pa
+ 	return container_of(mtd, struct mtd_part, mtd);
+ }
+ 
++static u64 part_absolute_offset(struct mtd_info *mtd)
++{
++	struct mtd_part *part = mtd_to_part(mtd);
++
++	if (!mtd_is_partition(mtd))
++		return 0;
++
++	return part_absolute_offset(part->parent) + part->offset;
++}
+ 
+ /*
+  * MTD methods which simply translate the effective address and pass through
+@@ -518,7 +527,7 @@ static struct mtd_part *allocate_partiti
+ 	if (!(slave->mtd.flags & MTD_NO_ERASE))
+ 		wr_alignment = slave->mtd.erasesize;
+ 
+-	tmp = slave->offset;
++	tmp = part_absolute_offset(parent) + slave->offset;
+ 	remainder = do_div(tmp, wr_alignment);
+ 	if ((slave->mtd.flags & MTD_WRITEABLE) && remainder) {
+ 		/* Doesn't start on a boundary of major erase size */
+@@ -529,7 +538,7 @@ static struct mtd_part *allocate_partiti
+ 			part->name);
+ 	}
+ 
+-	tmp = slave->mtd.size;
++	tmp = part_absolute_offset(parent) + slave->mtd.size;
+ 	remainder = do_div(tmp, wr_alignment);
+ 	if ((slave->mtd.flags & MTD_WRITEABLE) && remainder) {
+ 		slave->mtd.flags &= ~MTD_WRITEABLE;
diff --git a/target/linux/generic/backport-5.4/080-v5.1-0001-bcma-keep-a-direct-pointer-to-the-struct-device.patch b/target/linux/generic/backport-5.4/080-v5.1-0001-bcma-keep-a-direct-pointer-to-the-struct-device.patch
new file mode 100644
index 0000000000..cc32aee17b
--- /dev/null
+++ b/target/linux/generic/backport-5.4/080-v5.1-0001-bcma-keep-a-direct-pointer-to-the-struct-device.patch
@@ -0,0 +1,199 @@
+From 5a1c18b761ddb299a06746948b9ec2814b04fa92 Mon Sep 17 00:00:00 2001
+From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <rafal@milecki.pl>
+Date: Wed, 2 Jan 2019 00:00:01 +0100
+Subject: [PATCH] bcma: keep a direct pointer to the struct device
+MIME-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+
+Accessing struct device is pretty useful/common so having a direct
+pointer:
+1) Simplifies some code
+2) Makes bcma_bus_get_host_dev() unneeded
+3) Allows further improvements like using dev_* printing helpers
+
+Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
+Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
+---
+ drivers/bcma/bcma_private.h |  1 -
+ drivers/bcma/driver_gpio.c  |  2 +-
+ drivers/bcma/host_pci.c     |  2 ++
+ drivers/bcma/host_soc.c     |  4 ++--
+ drivers/bcma/main.c         | 45 +++++++++----------------------------
+ include/linux/bcma/bcma.h   | 11 +++------
+ 6 files changed, 18 insertions(+), 47 deletions(-)
+
+--- a/drivers/bcma/bcma_private.h
++++ b/drivers/bcma/bcma_private.h
+@@ -33,7 +33,6 @@ int __init bcma_bus_early_register(struc
+ int bcma_bus_suspend(struct bcma_bus *bus);
+ int bcma_bus_resume(struct bcma_bus *bus);
+ #endif
+-struct device *bcma_bus_get_host_dev(struct bcma_bus *bus);
+ 
+ /* scan.c */
+ void bcma_detect_chip(struct bcma_bus *bus);
+--- a/drivers/bcma/driver_gpio.c
++++ b/drivers/bcma/driver_gpio.c
+@@ -183,7 +183,7 @@ int bcma_gpio_init(struct bcma_drv_cc *c
+ 	chip->direction_input	= bcma_gpio_direction_input;
+ 	chip->direction_output	= bcma_gpio_direction_output;
+ 	chip->owner		= THIS_MODULE;
+-	chip->parent		= bcma_bus_get_host_dev(bus);
++	chip->parent		= bus->dev;
+ #if IS_BUILTIN(CONFIG_OF)
+ 	chip->of_node		= cc->core->dev.of_node;
+ #endif
+--- a/drivers/bcma/host_pci.c
++++ b/drivers/bcma/host_pci.c
+@@ -196,6 +196,8 @@ static int bcma_host_pci_probe(struct pc
+ 		goto err_pci_release_regions;
+ 	}
+ 
++	bus->dev = &dev->dev;
++
+ 	/* Map MMIO */
+ 	err = -ENOMEM;
+ 	bus->mmio = pci_iomap(dev, 0, ~0UL);
+--- a/drivers/bcma/host_soc.c
++++ b/drivers/bcma/host_soc.c
+@@ -179,7 +179,6 @@ int __init bcma_host_soc_register(struct
+ 	/* Host specific */
+ 	bus->hosttype = BCMA_HOSTTYPE_SOC;
+ 	bus->ops = &bcma_host_soc_ops;
+-	bus->host_pdev = NULL;
+ 
+ 	/* Initialize struct, detect chip */
+ 	bcma_init_bus(bus);
+@@ -213,6 +212,8 @@ static int bcma_host_soc_probe(struct pl
+ 	if (!bus)
+ 		return -ENOMEM;
+ 
++	bus->dev = dev;
++
+ 	/* Map MMIO */
+ 	bus->mmio = of_iomap(np, 0);
+ 	if (!bus->mmio)
+@@ -221,7 +222,6 @@ static int bcma_host_soc_probe(struct pl
+ 	/* Host specific */
+ 	bus->hosttype = BCMA_HOSTTYPE_SOC;
+ 	bus->ops = &bcma_host_soc_ops;
+-	bus->host_pdev = pdev;
+ 
+ 	/* Initialize struct, detect chip */
+ 	bcma_init_bus(bus);
+--- a/drivers/bcma/main.c
++++ b/drivers/bcma/main.c
+@@ -223,8 +223,8 @@ unsigned int bcma_core_irq(struct bcma_d
+ 			mips_irq = bcma_core_mips_irq(core);
+ 			return mips_irq <= 4 ? mips_irq + 2 : 0;
+ 		}
+-		if (bus->host_pdev)
+-			return bcma_of_get_irq(&bus->host_pdev->dev, core, num);
++		if (bus->dev)
++			return bcma_of_get_irq(bus->dev, core, num);
+ 		return 0;
+ 	case BCMA_HOSTTYPE_SDIO:
+ 		return 0;
+@@ -239,18 +239,18 @@ void bcma_prepare_core(struct bcma_bus *
+ 	core->dev.release = bcma_release_core_dev;
+ 	core->dev.bus = &bcma_bus_type;
+ 	dev_set_name(&core->dev, "bcma%d:%d", bus->num, core->core_index);
+-	core->dev.parent = bcma_bus_get_host_dev(bus);
+-	if (core->dev.parent)
+-		bcma_of_fill_device(core->dev.parent, core);
++	core->dev.parent = bus->dev;
++	if (bus->dev)
++		bcma_of_fill_device(bus->dev, core);
+ 
+ 	switch (bus->hosttype) {
+ 	case BCMA_HOSTTYPE_PCI:
+-		core->dma_dev = &bus->host_pci->dev;
++		core->dma_dev = bus->dev;
+ 		core->irq = bus->host_pci->irq;
+ 		break;
+ 	case BCMA_HOSTTYPE_SOC:
+-		if (IS_ENABLED(CONFIG_OF) && bus->host_pdev) {
+-			core->dma_dev = &bus->host_pdev->dev;
++		if (IS_ENABLED(CONFIG_OF) && bus->dev) {
++			core->dma_dev = bus->dev;
+ 		} else {
+ 			core->dev.dma_mask = &core->dev.coherent_dma_mask;
+ 			core->dma_dev = &core->dev;
+@@ -261,28 +261,6 @@ void bcma_prepare_core(struct bcma_bus *
+ 	}
+ }
+ 
+-struct device *bcma_bus_get_host_dev(struct bcma_bus *bus)
+-{
+-	switch (bus->hosttype) {
+-	case BCMA_HOSTTYPE_PCI:
+-		if (bus->host_pci)
+-			return &bus->host_pci->dev;
+-		else
+-			return NULL;
+-	case BCMA_HOSTTYPE_SOC:
+-		if (bus->host_pdev)
+-			return &bus->host_pdev->dev;
+-		else
+-			return NULL;
+-	case BCMA_HOSTTYPE_SDIO:
+-		if (bus->host_sdio)
+-			return &bus->host_sdio->dev;
+-		else
+-			return NULL;
+-	}
+-	return NULL;
+-}
+-
+ void bcma_init_bus(struct bcma_bus *bus)
+ {
+ 	mutex_lock(&bcma_buses_mutex);
+@@ -402,7 +380,6 @@ int bcma_bus_register(struct bcma_bus *b
+ {
+ 	int err;
+ 	struct bcma_device *core;
+-	struct device *dev;
+ 
+ 	/* Scan for devices (cores) */
+ 	err = bcma_bus_scan(bus);
+@@ -425,10 +402,8 @@ int bcma_bus_register(struct bcma_bus *b
+ 		bcma_core_pci_early_init(&bus->drv_pci[0]);
+ 	}
+ 
+-	dev = bcma_bus_get_host_dev(bus);
+-	if (dev) {
+-		of_platform_default_populate(dev->of_node, NULL, dev);
+-	}
++	if (bus->dev)
++		of_platform_default_populate(bus->dev->of_node, NULL, bus->dev);
+ 
+ 	/* Cores providing flash access go before SPROM init */
+ 	list_for_each_entry(core, &bus->cores, list) {
+--- a/include/linux/bcma/bcma.h
++++ b/include/linux/bcma/bcma.h
+@@ -332,6 +332,8 @@ extern int bcma_arch_register_fallback_s
+ 		struct ssb_sprom *out));
+ 
+ struct bcma_bus {
++	struct device *dev;
++
+ 	/* The MMIO area. */
+ 	void __iomem *mmio;
+ 
+@@ -339,14 +341,7 @@ struct bcma_bus {
+ 
+ 	enum bcma_hosttype hosttype;
+ 	bool host_is_pcie2; /* Used for BCMA_HOSTTYPE_PCI only */
+-	union {
+-		/* Pointer to the PCI bus (only for BCMA_HOSTTYPE_PCI) */
+-		struct pci_dev *host_pci;
+-		/* Pointer to the SDIO device (only for BCMA_HOSTTYPE_SDIO) */
+-		struct sdio_func *host_sdio;
+-		/* Pointer to platform device (only for BCMA_HOSTTYPE_SOC) */
+-		struct platform_device *host_pdev;
+-	};
++	struct pci_dev *host_pci; /* PCI bus pointer (BCMA_HOSTTYPE_PCI only) */
+ 
+ 	struct bcma_chipinfo chipinfo;
+ 
diff --git a/target/linux/generic/backport-5.4/080-v5.1-0002-bcma-use-dev_-printing-functions.patch b/target/linux/generic/backport-5.4/080-v5.1-0002-bcma-use-dev_-printing-functions.patch
new file mode 100644
index 0000000000..7ce8ba8967
--- /dev/null
+++ b/target/linux/generic/backport-5.4/080-v5.1-0002-bcma-use-dev_-printing-functions.patch
@@ -0,0 +1,36 @@
+From 777bc4801a6868fcbff09ffb6e30f023e7c5ed38 Mon Sep 17 00:00:00 2001
+From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <rafal@milecki.pl>
+Date: Wed, 2 Jan 2019 00:00:02 +0100
+Subject: [PATCH] bcma: use dev_* printing functions
+MIME-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+
+It provides more meaningful messages.
+
+Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
+Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
+---
+ drivers/bcma/bcma_private.h | 8 ++++----
+ 1 file changed, 4 insertions(+), 4 deletions(-)
+
+--- a/drivers/bcma/bcma_private.h
++++ b/drivers/bcma/bcma_private.h
+@@ -10,13 +10,13 @@
+ #include <linux/delay.h>
+ 
+ #define bcma_err(bus, fmt, ...) \
+-	pr_err("bus%d: " fmt, (bus)->num, ##__VA_ARGS__)
++	dev_err((bus)->dev, "bus%d: " fmt, (bus)->num, ##__VA_ARGS__)
+ #define bcma_warn(bus, fmt, ...) \
+-	pr_warn("bus%d: " fmt, (bus)->num, ##__VA_ARGS__)
++	dev_warn((bus)->dev, "bus%d: " fmt, (bus)->num, ##__VA_ARGS__)
+ #define bcma_info(bus, fmt, ...) \
+-	pr_info("bus%d: " fmt, (bus)->num, ##__VA_ARGS__)
++	dev_info((bus)->dev, "bus%d: " fmt, (bus)->num, ##__VA_ARGS__)
+ #define bcma_debug(bus, fmt, ...) \
+-	pr_debug("bus%d: " fmt, (bus)->num, ##__VA_ARGS__)
++	dev_dbg((bus)->dev, "bus%d: " fmt, (bus)->num, ##__VA_ARGS__)
+ 
+ struct bcma_bus;
+ 
diff --git a/target/linux/generic/backport-5.4/095-Allow-class-e-address-assignment-via-ifconfig-ioctl.patch b/target/linux/generic/backport-5.4/095-Allow-class-e-address-assignment-via-ifconfig-ioctl.patch
new file mode 100644
index 0000000000..bf6d9aca34
--- /dev/null
+++ b/target/linux/generic/backport-5.4/095-Allow-class-e-address-assignment-via-ifconfig-ioctl.patch
@@ -0,0 +1,79 @@
+From 46bf067870156abd61fe24d14c2486d15b8b502c Mon Sep 17 00:00:00 2001
+From: Dave Taht <dave@taht.net>
+Date: Fri, 14 Dec 2018 18:38:40 +0000
+Subject: [PATCH 1/1] Allow class-e address assignment in ifconfig and early
+ boot
+
+While the linux kernel became mostly "class-e clean" a decade ago,
+and most distributions long ago switched to the iproute2 suite
+of utilities, which allow class-e (240.0.0.0/4) address assignment,
+distributions relying on busybox, toybox and other forms of
+ifconfig cannot assign class-e addresses without this kernel patch.
+
+With this patch, also, a boot command line on these addresses is feasible:
+(ip=248.0.1.2::248.0.1.1:255.255.255.0).
+
+While CIDR has been obsolete for 2 decades, and a survey of all the
+userspace open source code in the world shows most IN_whatever macros
+are also obsolete... rather than obsolete CIDR from this ioctl entirely,
+this patch merely enables class-e assignment, sanely.
+
+H/T to Vince Fuller and his original patch here:
+    https://lkml.org/lkml/2008/1/7/370
+
+Signed-off-by: Dave Taht <dave.taht@gmail.com>
+Reviewed-by: John Gilmore <gnu@toad.com>
+---
+ include/uapi/linux/in.h | 8 ++++++--
+ net/ipv4/devinet.c      | 4 +++-
+ net/ipv4/ipconfig.c     | 2 ++
+ 3 files changed, 11 insertions(+), 3 deletions(-)
+
+--- a/include/uapi/linux/in.h
++++ b/include/uapi/linux/in.h
+@@ -268,8 +268,12 @@ struct sockaddr_in {
+ #define	IN_MULTICAST(a)		IN_CLASSD(a)
+ #define IN_MULTICAST_NET	0xF0000000
+ 
+-#define	IN_EXPERIMENTAL(a)	((((long int) (a)) & 0xf0000000) == 0xf0000000)
+-#define	IN_BADCLASS(a)		IN_EXPERIMENTAL((a))
++#define	IN_BADCLASS(a)		(((long int) (a) ) == (long int)0xffffffff)
++#define	IN_EXPERIMENTAL(a)	IN_BADCLASS((a))
++
++#define	IN_CLASSE(a)		((((long int) (a)) & 0xf0000000) == 0xf0000000)
++#define	IN_CLASSE_NET		0xffffffff
++#define	IN_CLASSE_NSHIFT	0
+ 
+ /* Address to accept any incoming messages. */
+ #define	INADDR_ANY		((unsigned long int) 0x00000000)
+--- a/net/ipv4/devinet.c
++++ b/net/ipv4/devinet.c
+@@ -949,7 +949,7 @@ static int inet_abc_len(__be32 addr)
+ {
+ 	int rc = -1;	/* Something else, probably a multicast. */
+ 
+-	if (ipv4_is_zeronet(addr))
++	if (ipv4_is_zeronet(addr) || ipv4_is_lbcast(addr))
+ 		rc = 0;
+ 	else {
+ 		__u32 haddr = ntohl(addr);
+@@ -960,6 +960,8 @@ static int inet_abc_len(__be32 addr)
+ 			rc = 16;
+ 		else if (IN_CLASSC(haddr))
+ 			rc = 24;
++		else if (IN_CLASSE(haddr))
++			rc = 32;
+ 	}
+ 
+ 	return rc;
+--- a/net/ipv4/ipconfig.c
++++ b/net/ipv4/ipconfig.c
+@@ -429,6 +429,8 @@ static int __init ic_defaults(void)
+ 			ic_netmask = htonl(IN_CLASSB_NET);
+ 		else if (IN_CLASSC(ntohl(ic_myaddr)))
+ 			ic_netmask = htonl(IN_CLASSC_NET);
++		else if (IN_CLASSE(ntohl(ic_myaddr)))
++			ic_netmask = htonl(IN_CLASSE_NET);
+ 		else {
+ 			pr_err("IP-Config: Unable to guess netmask for address %pI4\n",
+ 			       &ic_myaddr);
diff --git a/target/linux/generic/backport-5.4/101-arm-cns3xxx-use-actual-size-reads-for-PCIe.patch b/target/linux/generic/backport-5.4/101-arm-cns3xxx-use-actual-size-reads-for-PCIe.patch
new file mode 100644
index 0000000000..2b3384391a
--- /dev/null
+++ b/target/linux/generic/backport-5.4/101-arm-cns3xxx-use-actual-size-reads-for-PCIe.patch
@@ -0,0 +1,46 @@
+From 4cc30de79d293f1e8c5f50ae3a9c005def9564a0 Mon Sep 17 00:00:00 2001
+From: Koen Vandeputte <koen.vandeputte@ncentric.com>
+Date: Mon, 7 Jan 2019 14:14:27 +0100
+Subject: [PATCH 2/2] arm: cns3xxx: use actual size reads for PCIe
+
+commit 802b7c06adc7 ("ARM: cns3xxx: Convert PCI to use generic config accessors")
+reimplemented cns3xxx_pci_read_config() using pci_generic_config_read32(),
+which preserved the property of only doing 32-bit reads.
+
+It also replaced cns3xxx_pci_write_config() with pci_generic_config_write(),
+so it changed writes from always being 32 bits to being the actual size,
+which works just fine.
+
+Due to:
+- The documentation does not mention that only 32 bit access is allowed.
+- Writes are already executed using the actual size
+- Extensive testing shows that 8b, 16b and 32b reads work as intended
+
+It makes perfectly sense to also swap 32 bit reading in favor of actual size.
+
+Fixes: 802b7c06adc7 ("ARM: cns3xxx: Convert PCI to use generic config accessors")
+Suggested-by: Bjorn Helgaas <bhelgaas@google.com>
+Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
+CC: Arnd Bergmann <arnd@arndb.de>
+CC: Krzysztof Halasa <khalasa@piap.pl>
+CC: Olof Johansson <olof@lixom.net>
+CC: Robin Leblon <robin.leblon@ncentric.com>
+CC: Rob Herring <robh@kernel.org>
+CC: Russell King <linux@armlinux.org.uk>
+CC: Tim Harvey <tharvey@gateworks.com>
+CC: stable@vger.kernel.org # v4.0+
+---
+ arch/arm/mach-cns3xxx/pcie.c | 2 +-
+ 1 file changed, 1 insertion(+), 1 deletion(-)
+
+--- a/arch/arm/mach-cns3xxx/pcie.c
++++ b/arch/arm/mach-cns3xxx/pcie.c
+@@ -93,7 +93,7 @@ static int cns3xxx_pci_read_config(struc
+ 	u32 mask = (0x1ull << (size * 8)) - 1;
+ 	int shift = (where % 4) * 8;
+ 
+-	ret = pci_generic_config_read32(bus, devfn, where, size, val);
++	ret = pci_generic_config_read(bus, devfn, where, size, val);
+ 
+ 	if (ret == PCIBIOS_SUCCESSFUL && !bus->number && !devfn &&
+ 	    (where & 0xffc) == PCI_CLASS_REVISION)
diff --git a/target/linux/generic/backport-5.4/200-v5.2-usb-dwc2-Set-lpm-mode-parameters-depend-on-HW-configuration.patch b/target/linux/generic/backport-5.4/200-v5.2-usb-dwc2-Set-lpm-mode-parameters-depend-on-HW-configuration.patch
new file mode 100644
index 0000000000..ed4aadf2be
--- /dev/null
+++ b/target/linux/generic/backport-5.4/200-v5.2-usb-dwc2-Set-lpm-mode-parameters-depend-on-HW-configuration.patch
@@ -0,0 +1,63 @@
+From 28b5c129ca6e585ec95c160ec4297bc6c6360b6f Mon Sep 17 00:00:00 2001
+From: Minas Harutyunyan <minas.harutyunyan@synopsys.com>
+Date: Mon, 4 Mar 2019 17:08:07 +0400
+Subject: usb: dwc2: Set lpm mode parameters depend on HW configuration
+
+If core not supported lpm, i.e. BCM2835 then confusing warnings seen
+in log.
+
+To avoid these warnings, added function dwc2_set_param_lpm() to set
+lpm and other lpm related parameters based on lpm support by core.
+
+Signed-off-by: Minas Harutyunyan <hminas@synopsys.com>
+Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
+---
+ drivers/usb/dwc2/params.c | 23 ++++++++++++++++++-----
+ 1 file changed, 18 insertions(+), 5 deletions(-)
+
+--- a/drivers/usb/dwc2/params.c
++++ b/drivers/usb/dwc2/params.c
+@@ -273,6 +273,23 @@ static void dwc2_set_param_power_down(st
+ 	hsotg->params.power_down = val;
+ }
+ 
++static void dwc2_set_param_lpm(struct dwc2_hsotg *hsotg)
++{
++	struct dwc2_core_params *p = &hsotg->params;
++
++	p->lpm = hsotg->hw_params.lpm_mode;
++	if (p->lpm) {
++		p->lpm_clock_gating = true;
++		p->besl = true;
++		p->hird_threshold_en = true;
++		p->hird_threshold = 4;
++	} else {
++		p->lpm_clock_gating = false;
++		p->besl = false;
++		p->hird_threshold_en = false;
++	}
++}
++
+ /**
+  * dwc2_set_default_params() - Set all core parameters to their
+  * auto-detected default values.
+@@ -291,6 +308,7 @@ static void dwc2_set_default_params(stru
+ 	dwc2_set_param_speed(hsotg);
+ 	dwc2_set_param_phy_utmi_width(hsotg);
+ 	dwc2_set_param_power_down(hsotg);
++	dwc2_set_param_lpm(hsotg);
+ 	p->phy_ulpi_ddr = false;
+ 	p->phy_ulpi_ext_vbus = false;
+ 
+@@ -303,11 +321,6 @@ static void dwc2_set_default_params(stru
+ 	p->reload_ctl = (hw->snpsid >= DWC2_CORE_REV_2_92a);
+ 	p->uframe_sched = true;
+ 	p->external_id_pin_ctl = false;
+-	p->lpm = true;
+-	p->lpm_clock_gating = true;
+-	p->besl = true;
+-	p->hird_threshold_en = true;
+-	p->hird_threshold = 4;
+ 	p->ipg_isoc_en = false;
+ 	p->max_packet_count = hw->max_packet_count;
+ 	p->max_transfer_size = hw->max_transfer_size;
diff --git a/target/linux/generic/backport-5.4/210-arm64-sve-Disentangle-uapi-asm-ptrace.h-from-uapi-as.patch b/target/linux/generic/backport-5.4/210-arm64-sve-Disentangle-uapi-asm-ptrace.h-from-uapi-as.patch
new file mode 100644
index 0000000000..7c574fd343
--- /dev/null
+++ b/target/linux/generic/backport-5.4/210-arm64-sve-Disentangle-uapi-asm-ptrace.h-from-uapi-as.patch
@@ -0,0 +1,280 @@
+From 9966a05c7b80f075f2bc7e48dbb108d3f2927234 Mon Sep 17 00:00:00 2001
+From: Dave Martin <Dave.Martin@arm.com>
+Date: Fri, 4 Jan 2019 13:09:51 +0000
+Subject: [PATCH] arm64/sve: Disentangle <uapi/asm/ptrace.h> from
+ <uapi/asm/sigcontext.h>
+
+Currently, <uapi/asm/sigcontext.h> provides common definitions for
+describing SVE context structures that are also used by the ptrace
+definitions in <uapi/asm/ptrace.h>.
+
+For this reason, a #include of <asm/sigcontext.h> was added in
+ptrace.h, but it this turns out that this can interact badly with
+userspace code that tries to include ptrace.h on top of the libc
+headers (which may provide their own shadow definitions for
+sigcontext.h).
+
+To make the headers easier for userspace to consume, this patch
+bounces the common definitions into an __SVE_* namespace and moves
+them to a backend header <uapi/asm/sve_context.h> that can be
+included by the other headers as appropriate.  This should allow
+ptrace.h to be used alongside libc's sigcontext.h (if any) without
+ill effects.
+
+This should make the situation unambiguous: <asm/sigcontext.h> is
+the header to include for the sigframe-specific definitions, while
+<asm/ptrace.h> is the header to include for ptrace-specific
+definitions.
+
+To avoid conflicting with existing usage, <asm/sigcontext.h>
+remains the canonical way to get the common definitions for
+SVE_VQ_MIN, sve_vq_from_vl() etc., both in userspace and in the
+kernel: relying on these being defined as a side effect of
+including just <asm/ptrace.h> was never intended to be safe.
+
+Signed-off-by: Dave Martin <Dave.Martin@arm.com>
+Signed-off-by: Will Deacon <will.deacon@arm.com>
+---
+ arch/arm64/include/uapi/asm/ptrace.h      | 39 ++++++++--------
+ arch/arm64/include/uapi/asm/sigcontext.h  | 56 +++++++++++------------
+ arch/arm64/include/uapi/asm/sve_context.h | 53 +++++++++++++++++++++
+ 3 files changed, 99 insertions(+), 49 deletions(-)
+ create mode 100644 arch/arm64/include/uapi/asm/sve_context.h
+
+--- a/arch/arm64/include/uapi/asm/ptrace.h
++++ b/arch/arm64/include/uapi/asm/ptrace.h
+@@ -23,7 +23,7 @@
+ #include <linux/types.h>
+ 
+ #include <asm/hwcap.h>
+-#include <asm/sigcontext.h>
++#include <asm/sve_context.h>
+ 
+ 
+ /*
+@@ -129,9 +129,9 @@ struct user_sve_header {
+  */
+ 
+ /* Offset from the start of struct user_sve_header to the register data */
+-#define SVE_PT_REGS_OFFSET					\
+-	((sizeof(struct user_sve_header) + (SVE_VQ_BYTES - 1))	\
+-		/ SVE_VQ_BYTES * SVE_VQ_BYTES)
++#define SVE_PT_REGS_OFFSET						\
++	((sizeof(struct user_sve_header) + (__SVE_VQ_BYTES - 1))	\
++		/ __SVE_VQ_BYTES * __SVE_VQ_BYTES)
+ 
+ /*
+  * The register data content and layout depends on the value of the
+@@ -177,39 +177,36 @@ struct user_sve_header {
+  * Additional data might be appended in the future.
+  */
+ 
+-#define SVE_PT_SVE_ZREG_SIZE(vq)	SVE_SIG_ZREG_SIZE(vq)
+-#define SVE_PT_SVE_PREG_SIZE(vq)	SVE_SIG_PREG_SIZE(vq)
+-#define SVE_PT_SVE_FFR_SIZE(vq)		SVE_SIG_FFR_SIZE(vq)
++#define SVE_PT_SVE_ZREG_SIZE(vq)	__SVE_ZREG_SIZE(vq)
++#define SVE_PT_SVE_PREG_SIZE(vq)	__SVE_PREG_SIZE(vq)
++#define SVE_PT_SVE_FFR_SIZE(vq)		__SVE_FFR_SIZE(vq)
+ #define SVE_PT_SVE_FPSR_SIZE		sizeof(__u32)
+ #define SVE_PT_SVE_FPCR_SIZE		sizeof(__u32)
+ 
+-#define __SVE_SIG_TO_PT(offset) \
+-	((offset) - SVE_SIG_REGS_OFFSET + SVE_PT_REGS_OFFSET)
+-
+ #define SVE_PT_SVE_OFFSET		SVE_PT_REGS_OFFSET
+ 
+ #define SVE_PT_SVE_ZREGS_OFFSET \
+-	__SVE_SIG_TO_PT(SVE_SIG_ZREGS_OFFSET)
++	(SVE_PT_REGS_OFFSET + __SVE_ZREGS_OFFSET)
+ #define SVE_PT_SVE_ZREG_OFFSET(vq, n) \
+-	__SVE_SIG_TO_PT(SVE_SIG_ZREG_OFFSET(vq, n))
++	(SVE_PT_REGS_OFFSET + __SVE_ZREG_OFFSET(vq, n))
+ #define SVE_PT_SVE_ZREGS_SIZE(vq) \
+-	(SVE_PT_SVE_ZREG_OFFSET(vq, SVE_NUM_ZREGS) - SVE_PT_SVE_ZREGS_OFFSET)
++	(SVE_PT_SVE_ZREG_OFFSET(vq, __SVE_NUM_ZREGS) - SVE_PT_SVE_ZREGS_OFFSET)
+ 
+ #define SVE_PT_SVE_PREGS_OFFSET(vq) \
+-	__SVE_SIG_TO_PT(SVE_SIG_PREGS_OFFSET(vq))
++	(SVE_PT_REGS_OFFSET + __SVE_PREGS_OFFSET(vq))
+ #define SVE_PT_SVE_PREG_OFFSET(vq, n) \
+-	__SVE_SIG_TO_PT(SVE_SIG_PREG_OFFSET(vq, n))
++	(SVE_PT_REGS_OFFSET + __SVE_PREG_OFFSET(vq, n))
+ #define SVE_PT_SVE_PREGS_SIZE(vq) \
+-	(SVE_PT_SVE_PREG_OFFSET(vq, SVE_NUM_PREGS) - \
++	(SVE_PT_SVE_PREG_OFFSET(vq, __SVE_NUM_PREGS) - \
+ 		SVE_PT_SVE_PREGS_OFFSET(vq))
+ 
+ #define SVE_PT_SVE_FFR_OFFSET(vq) \
+-	__SVE_SIG_TO_PT(SVE_SIG_FFR_OFFSET(vq))
++	(SVE_PT_REGS_OFFSET + __SVE_FFR_OFFSET(vq))
+ 
+ #define SVE_PT_SVE_FPSR_OFFSET(vq)				\
+ 	((SVE_PT_SVE_FFR_OFFSET(vq) + SVE_PT_SVE_FFR_SIZE(vq) +	\
+-			(SVE_VQ_BYTES - 1))			\
+-		/ SVE_VQ_BYTES * SVE_VQ_BYTES)
++			(__SVE_VQ_BYTES - 1))			\
++		/ __SVE_VQ_BYTES * __SVE_VQ_BYTES)
+ #define SVE_PT_SVE_FPCR_OFFSET(vq) \
+ 	(SVE_PT_SVE_FPSR_OFFSET(vq) + SVE_PT_SVE_FPSR_SIZE)
+ 
+@@ -220,8 +217,8 @@ struct user_sve_header {
+ 
+ #define SVE_PT_SVE_SIZE(vq, flags)					\
+ 	((SVE_PT_SVE_FPCR_OFFSET(vq) + SVE_PT_SVE_FPCR_SIZE		\
+-			- SVE_PT_SVE_OFFSET + (SVE_VQ_BYTES - 1))	\
+-		/ SVE_VQ_BYTES * SVE_VQ_BYTES)
++			- SVE_PT_SVE_OFFSET + (__SVE_VQ_BYTES - 1))	\
++		/ __SVE_VQ_BYTES * __SVE_VQ_BYTES)
+ 
+ #define SVE_PT_SIZE(vq, flags)						\
+ 	 (((flags) & SVE_PT_REGS_MASK) == SVE_PT_REGS_SVE ?		\
+--- a/arch/arm64/include/uapi/asm/sigcontext.h
++++ b/arch/arm64/include/uapi/asm/sigcontext.h
+@@ -130,6 +130,8 @@ struct sve_context {
+ 
+ #endif /* !__ASSEMBLY__ */
+ 
++#include <asm/sve_context.h>
++
+ /*
+  * The SVE architecture leaves space for future expansion of the
+  * vector length beyond its initial architectural limit of 2048 bits
+@@ -138,21 +140,20 @@ struct sve_context {
+  * See linux/Documentation/arm64/sve.txt for a description of the VL/VQ
+  * terminology.
+  */
+-#define SVE_VQ_BYTES		16	/* number of bytes per quadword */
++#define SVE_VQ_BYTES		__SVE_VQ_BYTES	/* bytes per quadword */
+ 
+-#define SVE_VQ_MIN		1
+-#define SVE_VQ_MAX		512
++#define SVE_VQ_MIN		__SVE_VQ_MIN
++#define SVE_VQ_MAX		__SVE_VQ_MAX
+ 
+-#define SVE_VL_MIN		(SVE_VQ_MIN * SVE_VQ_BYTES)
+-#define SVE_VL_MAX		(SVE_VQ_MAX * SVE_VQ_BYTES)
++#define SVE_VL_MIN		__SVE_VL_MIN
++#define SVE_VL_MAX		__SVE_VL_MAX
+ 
+-#define SVE_NUM_ZREGS		32
+-#define SVE_NUM_PREGS		16
++#define SVE_NUM_ZREGS		__SVE_NUM_ZREGS
++#define SVE_NUM_PREGS		__SVE_NUM_PREGS
+ 
+-#define sve_vl_valid(vl) \
+-	((vl) % SVE_VQ_BYTES == 0 && (vl) >= SVE_VL_MIN && (vl) <= SVE_VL_MAX)
+-#define sve_vq_from_vl(vl)	((vl) / SVE_VQ_BYTES)
+-#define sve_vl_from_vq(vq)	((vq) * SVE_VQ_BYTES)
++#define sve_vl_valid(vl)	__sve_vl_valid(vl)
++#define sve_vq_from_vl(vl)	__sve_vq_from_vl(vl)
++#define sve_vl_from_vq(vq)	__sve_vl_from_vq(vq)
+ 
+ /*
+  * If the SVE registers are currently live for the thread at signal delivery,
+@@ -205,34 +206,33 @@ struct sve_context {
+  * Additional data might be appended in the future.
+  */
+ 
+-#define SVE_SIG_ZREG_SIZE(vq)	((__u32)(vq) * SVE_VQ_BYTES)
+-#define SVE_SIG_PREG_SIZE(vq)	((__u32)(vq) * (SVE_VQ_BYTES / 8))
+-#define SVE_SIG_FFR_SIZE(vq)	SVE_SIG_PREG_SIZE(vq)
++#define SVE_SIG_ZREG_SIZE(vq)	__SVE_ZREG_SIZE(vq)
++#define SVE_SIG_PREG_SIZE(vq)	__SVE_PREG_SIZE(vq)
++#define SVE_SIG_FFR_SIZE(vq)	__SVE_FFR_SIZE(vq)
+ 
+ #define SVE_SIG_REGS_OFFSET					\
+-	((sizeof(struct sve_context) + (SVE_VQ_BYTES - 1))	\
+-		/ SVE_VQ_BYTES * SVE_VQ_BYTES)
++	((sizeof(struct sve_context) + (__SVE_VQ_BYTES - 1))	\
++		/ __SVE_VQ_BYTES * __SVE_VQ_BYTES)
+ 
+-#define SVE_SIG_ZREGS_OFFSET	SVE_SIG_REGS_OFFSET
++#define SVE_SIG_ZREGS_OFFSET \
++		(SVE_SIG_REGS_OFFSET + __SVE_ZREGS_OFFSET)
+ #define SVE_SIG_ZREG_OFFSET(vq, n) \
+-	(SVE_SIG_ZREGS_OFFSET + SVE_SIG_ZREG_SIZE(vq) * (n))
+-#define SVE_SIG_ZREGS_SIZE(vq) \
+-	(SVE_SIG_ZREG_OFFSET(vq, SVE_NUM_ZREGS) - SVE_SIG_ZREGS_OFFSET)
++		(SVE_SIG_REGS_OFFSET + __SVE_ZREG_OFFSET(vq, n))
++#define SVE_SIG_ZREGS_SIZE(vq) __SVE_ZREGS_SIZE(vq)
+ 
+ #define SVE_SIG_PREGS_OFFSET(vq) \
+-	(SVE_SIG_ZREGS_OFFSET + SVE_SIG_ZREGS_SIZE(vq))
++		(SVE_SIG_REGS_OFFSET + __SVE_PREGS_OFFSET(vq))
+ #define SVE_SIG_PREG_OFFSET(vq, n) \
+-	(SVE_SIG_PREGS_OFFSET(vq) + SVE_SIG_PREG_SIZE(vq) * (n))
+-#define SVE_SIG_PREGS_SIZE(vq) \
+-	(SVE_SIG_PREG_OFFSET(vq, SVE_NUM_PREGS) - SVE_SIG_PREGS_OFFSET(vq))
++		(SVE_SIG_REGS_OFFSET + __SVE_PREG_OFFSET(vq, n))
++#define SVE_SIG_PREGS_SIZE(vq) __SVE_PREGS_SIZE(vq)
+ 
+ #define SVE_SIG_FFR_OFFSET(vq) \
+-	(SVE_SIG_PREGS_OFFSET(vq) + SVE_SIG_PREGS_SIZE(vq))
++		(SVE_SIG_REGS_OFFSET + __SVE_FFR_OFFSET(vq))
+ 
+ #define SVE_SIG_REGS_SIZE(vq) \
+-	(SVE_SIG_FFR_OFFSET(vq) + SVE_SIG_FFR_SIZE(vq) - SVE_SIG_REGS_OFFSET)
+-
+-#define SVE_SIG_CONTEXT_SIZE(vq) (SVE_SIG_REGS_OFFSET + SVE_SIG_REGS_SIZE(vq))
++		(__SVE_FFR_OFFSET(vq) + __SVE_FFR_SIZE(vq))
+ 
++#define SVE_SIG_CONTEXT_SIZE(vq) \
++		(SVE_SIG_REGS_OFFSET + SVE_SIG_REGS_SIZE(vq))
+ 
+ #endif /* _UAPI__ASM_SIGCONTEXT_H */
+--- /dev/null
++++ b/arch/arm64/include/uapi/asm/sve_context.h
+@@ -0,0 +1,53 @@
++/* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */
++/* Copyright (C) 2017-2018 ARM Limited */
++
++/*
++ * For use by other UAPI headers only.
++ * Do not make direct use of header or its definitions.
++ */
++
++#ifndef _UAPI__ASM_SVE_CONTEXT_H
++#define _UAPI__ASM_SVE_CONTEXT_H
++
++#include <linux/types.h>
++
++#define __SVE_VQ_BYTES		16	/* number of bytes per quadword */
++
++#define __SVE_VQ_MIN		1
++#define __SVE_VQ_MAX		512
++
++#define __SVE_VL_MIN		(__SVE_VQ_MIN * __SVE_VQ_BYTES)
++#define __SVE_VL_MAX		(__SVE_VQ_MAX * __SVE_VQ_BYTES)
++
++#define __SVE_NUM_ZREGS		32
++#define __SVE_NUM_PREGS		16
++
++#define __sve_vl_valid(vl)			\
++	((vl) % __SVE_VQ_BYTES == 0 &&		\
++	 (vl) >= __SVE_VL_MIN &&		\
++	 (vl) <= __SVE_VL_MAX)
++
++#define __sve_vq_from_vl(vl)	((vl) / __SVE_VQ_BYTES)
++#define __sve_vl_from_vq(vq)	((vq) * __SVE_VQ_BYTES)
++
++#define __SVE_ZREG_SIZE(vq)	((__u32)(vq) * __SVE_VQ_BYTES)
++#define __SVE_PREG_SIZE(vq)	((__u32)(vq) * (__SVE_VQ_BYTES / 8))
++#define __SVE_FFR_SIZE(vq)	__SVE_PREG_SIZE(vq)
++
++#define __SVE_ZREGS_OFFSET	0
++#define __SVE_ZREG_OFFSET(vq, n) \
++	(__SVE_ZREGS_OFFSET + __SVE_ZREG_SIZE(vq) * (n))
++#define __SVE_ZREGS_SIZE(vq) \
++	(__SVE_ZREG_OFFSET(vq, __SVE_NUM_ZREGS) - __SVE_ZREGS_OFFSET)
++
++#define __SVE_PREGS_OFFSET(vq) \
++	(__SVE_ZREGS_OFFSET + __SVE_ZREGS_SIZE(vq))
++#define __SVE_PREG_OFFSET(vq, n) \
++	(__SVE_PREGS_OFFSET(vq) + __SVE_PREG_SIZE(vq) * (n))
++#define __SVE_PREGS_SIZE(vq) \
++	(__SVE_PREG_OFFSET(vq, __SVE_NUM_PREGS) - __SVE_PREGS_OFFSET(vq))
++
++#define __SVE_FFR_OFFSET(vq) \
++	(__SVE_PREGS_OFFSET(vq) + __SVE_PREGS_SIZE(vq))
++
++#endif /* ! _UAPI__ASM_SVE_CONTEXT_H */
diff --git a/target/linux/generic/backport-5.4/343-netfilter-nft_flow_offload-handle-netdevice-events-f.patch b/target/linux/generic/backport-5.4/343-netfilter-nft_flow_offload-handle-netdevice-events-f.patch
new file mode 100644
index 0000000000..577f2d3df6
--- /dev/null
+++ b/target/linux/generic/backport-5.4/343-netfilter-nft_flow_offload-handle-netdevice-events-f.patch
@@ -0,0 +1,99 @@
+From: Pablo Neira Ayuso <pablo@netfilter.org>
+Date: Thu, 25 Jan 2018 12:58:55 +0100
+Subject: [PATCH] netfilter: nft_flow_offload: handle netdevice events from
+ nf_flow_table
+
+Move the code that deals with device events to the core.
+
+Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
+---
+
+--- a/net/netfilter/nf_flow_table_core.c
++++ b/net/netfilter/nf_flow_table_core.c
+@@ -535,5 +535,35 @@ void nf_flow_table_free(struct nf_flowta
+ }
+ EXPORT_SYMBOL_GPL(nf_flow_table_free);
+ 
++static int nf_flow_table_netdev_event(struct notifier_block *this,
++				      unsigned long event, void *ptr)
++{
++	struct net_device *dev = netdev_notifier_info_to_dev(ptr);
++
++	if (event != NETDEV_DOWN)
++		return NOTIFY_DONE;
++
++	nf_flow_table_cleanup(dev_net(dev), dev);
++
++	return NOTIFY_DONE;
++}
++
++static struct notifier_block flow_offload_netdev_notifier = {
++	.notifier_call	= nf_flow_table_netdev_event,
++};
++
++static int __init nf_flow_table_module_init(void)
++{
++	return register_netdevice_notifier(&flow_offload_netdev_notifier);
++}
++
++static void __exit nf_flow_table_module_exit(void)
++{
++	unregister_netdevice_notifier(&flow_offload_netdev_notifier);
++}
++
++module_init(nf_flow_table_module_init);
++module_exit(nf_flow_table_module_exit);
++
+ MODULE_LICENSE("GPL");
+ MODULE_AUTHOR("Pablo Neira Ayuso <pablo@netfilter.org>");
+--- a/net/netfilter/nft_flow_offload.c
++++ b/net/netfilter/nft_flow_offload.c
+@@ -216,47 +216,14 @@ static struct nft_expr_type nft_flow_off
+ 	.owner		= THIS_MODULE,
+ };
+ 
+-static int flow_offload_netdev_event(struct notifier_block *this,
+-				     unsigned long event, void *ptr)
+-{
+-	struct net_device *dev = netdev_notifier_info_to_dev(ptr);
+-
+-	if (event != NETDEV_DOWN)
+-		return NOTIFY_DONE;
+-
+-	nf_flow_table_cleanup(dev_net(dev), dev);
+-
+-	return NOTIFY_DONE;
+-}
+-
+-static struct notifier_block flow_offload_netdev_notifier = {
+-	.notifier_call	= flow_offload_netdev_event,
+-};
+-
+ static int __init nft_flow_offload_module_init(void)
+ {
+-	int err;
+-
+-	err = register_netdevice_notifier(&flow_offload_netdev_notifier);
+-	if (err)
+-		goto err;
+-
+-	err = nft_register_expr(&nft_flow_offload_type);
+-	if (err < 0)
+-		goto register_expr;
+-
+-	return 0;
+-
+-register_expr:
+-	unregister_netdevice_notifier(&flow_offload_netdev_notifier);
+-err:
+-	return err;
++	return nft_register_expr(&nft_flow_offload_type);
+ }
+ 
+ static void __exit nft_flow_offload_module_exit(void)
+ {
+ 	nft_unregister_expr(&nft_flow_offload_type);
+-	unregister_netdevice_notifier(&flow_offload_netdev_notifier);
+ }
+ 
+ module_init(nft_flow_offload_module_init);
diff --git a/target/linux/generic/backport-5.4/370-netfilter-nf_flow_table-fix-offloaded-connection-tim.patch b/target/linux/generic/backport-5.4/370-netfilter-nf_flow_table-fix-offloaded-connection-tim.patch
new file mode 100644
index 0000000000..7c10f6f189
--- /dev/null
+++ b/target/linux/generic/backport-5.4/370-netfilter-nf_flow_table-fix-offloaded-connection-tim.patch
@@ -0,0 +1,112 @@
+From: Felix Fietkau <nbd@nbd.name>
+Date: Wed, 13 Jun 2018 12:33:39 +0200
+Subject: [PATCH] netfilter: nf_flow_table: fix offloaded connection timeout
+ corner case
+
+The full teardown of offloaded flows is deferred to a gc work item,
+however processing of packets by netfilter needs to happen immediately
+after a teardown is requested, because the conntrack state needs to be
+fixed up.
+
+Since the IPS_OFFLOAD_BIT is still kept until the teardown is complete,
+the netfilter conntrack gc can accidentally bump the timeout of a
+connection where offload was just stopped, causing a conntrack entry
+leak.
+
+Fix this by moving the conntrack timeout bumping from conntrack core to
+the nf_flow_offload and add a check to prevent bogus timeout bumps.
+
+Signed-off-by: Felix Fietkau <nbd@nbd.name>
+---
+
+--- a/net/netfilter/nf_conntrack_core.c
++++ b/net/netfilter/nf_conntrack_core.c
+@@ -1178,18 +1178,6 @@ static bool gc_worker_can_early_drop(con
+ 	return false;
+ }
+ 
+-#define	DAY	(86400 * HZ)
+-
+-/* Set an arbitrary timeout large enough not to ever expire, this save
+- * us a check for the IPS_OFFLOAD_BIT from the packet path via
+- * nf_ct_is_expired().
+- */
+-static void nf_ct_offload_timeout(struct nf_conn *ct)
+-{
+-	if (nf_ct_expires(ct) < DAY / 2)
+-		ct->timeout = nfct_time_stamp + DAY;
+-}
+-
+ static void gc_worker(struct work_struct *work)
+ {
+ 	unsigned int min_interval = max(HZ / GC_MAX_BUCKETS_DIV, 1u);
+@@ -1226,10 +1214,8 @@ static void gc_worker(struct work_struct
+ 			tmp = nf_ct_tuplehash_to_ctrack(h);
+ 
+ 			scanned++;
+-			if (test_bit(IPS_OFFLOAD_BIT, &tmp->status)) {
+-				nf_ct_offload_timeout(tmp);
++			if (test_bit(IPS_OFFLOAD_BIT, &tmp->status))
+ 				continue;
+-			}
+ 
+ 			if (nf_ct_is_expired(tmp)) {
+ 				nf_ct_gc_expired(tmp);
+--- a/net/netfilter/nf_flow_table_core.c
++++ b/net/netfilter/nf_flow_table_core.c
+@@ -183,10 +183,29 @@ static const struct rhashtable_params nf
+ 	.automatic_shrinking	= true,
+ };
+ 
++#define        DAY     (86400 * HZ)
++
++/* Set an arbitrary timeout large enough not to ever expire, this save
++ * us a check for the IPS_OFFLOAD_BIT from the packet path via
++ * nf_ct_is_expired().
++ */
++static void nf_ct_offload_timeout(struct flow_offload *flow)
++{
++	struct flow_offload_entry *entry;
++	struct nf_conn *ct;
++
++	entry = container_of(flow, struct flow_offload_entry, flow);
++	ct = entry->ct;
++
++	if (nf_ct_expires(ct) < DAY / 2)
++		ct->timeout = nfct_time_stamp + DAY;
++}
++
+ int flow_offload_add(struct nf_flowtable *flow_table, struct flow_offload *flow)
+ {
+ 	int err;
+ 
++	nf_ct_offload_timeout(flow);
+ 	flow->timeout = (u32)jiffies + NF_FLOW_TIMEOUT;
+ 
+ 	err = rhashtable_insert_fast(&flow_table->rhashtable,
+@@ -317,6 +336,8 @@ static int nf_flow_offload_gc_step(struc
+ 	rhashtable_walk_start(&hti);
+ 
+ 	while ((tuplehash = rhashtable_walk_next(&hti))) {
++		bool teardown;
++
+ 		if (IS_ERR(tuplehash)) {
+ 			err = PTR_ERR(tuplehash);
+ 			if (err != -EAGAIN)
+@@ -329,9 +350,13 @@ static int nf_flow_offload_gc_step(struc
+ 
+ 		flow = container_of(tuplehash, struct flow_offload, tuplehash[0]);
+ 
+-		if (nf_flow_has_expired(flow) ||
+-		    (flow->flags & (FLOW_OFFLOAD_DYING |
+-				    FLOW_OFFLOAD_TEARDOWN)))
++		teardown = flow->flags & (FLOW_OFFLOAD_DYING |
++					  FLOW_OFFLOAD_TEARDOWN);
++
++		if (!teardown)
++			nf_ct_offload_timeout(flow);
++
++		if (nf_flow_has_expired(flow) || teardown)
+ 			flow_offload_del(flow_table, flow);
+ 	}
+ out:
diff --git a/target/linux/generic/backport-5.4/371-netfilter-nf_flow_table-fix-up-ct-state-of-flows-aft.patch b/target/linux/generic/backport-5.4/371-netfilter-nf_flow_table-fix-up-ct-state-of-flows-aft.patch
new file mode 100644
index 0000000000..2e25066499
--- /dev/null
+++ b/target/linux/generic/backport-5.4/371-netfilter-nf_flow_table-fix-up-ct-state-of-flows-aft.patch
@@ -0,0 +1,24 @@
+From: Felix Fietkau <nbd@nbd.name>
+Date: Thu, 14 Jun 2018 11:20:09 +0200
+Subject: [PATCH] netfilter: nf_flow_table: fix up ct state of flows after
+ timeout
+
+If a connection simply times out instead of being torn down, it is left
+active with a long timeout. Fix this by calling flow_offload_fixup_ct_state
+here as well.
+
+Signed-off-by: Felix Fietkau <nbd@nbd.name>
+---
+
+--- a/net/netfilter/nf_flow_table_core.c
++++ b/net/netfilter/nf_flow_table_core.c
+@@ -243,6 +243,9 @@ static void flow_offload_del(struct nf_f
+ 	e = container_of(flow, struct flow_offload_entry, flow);
+ 	clear_bit(IPS_OFFLOAD_BIT, &e->ct->status);
+ 
++	if (!(flow->flags & FLOW_OFFLOAD_TEARDOWN))
++		flow_offload_fixup_ct_state(e->ct);
++
+ 	flow_offload_free(flow);
+ }
+ 
diff --git a/target/linux/generic/backport-5.4/380-v5.3-net-sched-Introduce-act_ctinfo-action.patch b/target/linux/generic/backport-5.4/380-v5.3-net-sched-Introduce-act_ctinfo-action.patch
new file mode 100644
index 0000000000..a680402f26
--- /dev/null
+++ b/target/linux/generic/backport-5.4/380-v5.3-net-sched-Introduce-act_ctinfo-action.patch
@@ -0,0 +1,670 @@
+From d129a72f465dab2d9fc8f1580c38600a8b808327 Mon Sep 17 00:00:00 2001
+From: Kevin Darbyshire-Bryant <ldir@darbyshire-bryant.me.uk>
+Date: Wed, 13 Mar 2019 20:54:49 +0000
+Subject: [PATCH] net: sched: Backport Introduce act_ctinfo action
+MIME-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+
+ctinfo is a new tc filter action module.  It is designed to restore
+information contained in firewall conntrack marks to other packet fields
+and is typically used on packet ingress paths.  At present it has two
+independent sub-functions or operating modes, DSCP restoration mode &
+skb mark restoration mode.
+
+The DSCP restore mode:
+
+This mode copies DSCP values that have been placed in the firewall
+conntrack mark back into the IPv4/v6 diffserv fields of relevant
+packets.
+
+The DSCP restoration is intended for use and has been found useful for
+restoring ingress classifications based on egress classifications across
+links that bleach or otherwise change DSCP, typically home ISP Internet
+links.  Restoring DSCP on ingress on the WAN link allows qdiscs such as
+but by no means limited to CAKE to shape inbound packets according to
+policies that are easier to set & mark on egress.
+
+Ingress classification is traditionally a challenging task since
+iptables rules haven't yet run and tc filter/eBPF programs are pre-NAT
+lookups, hence are unable to see internal IPv4 addresses as used on the
+typical home masquerading gateway.  Thus marking the connection in some
+manner on egress for later restoration of classification on ingress is
+easier to implement.
+
+Parameters related to DSCP restore mode:
+
+dscpmask - a 32 bit mask of 6 contiguous bits and indicate bits of the
+conntrack mark field contain the DSCP value to be restored.
+
+statemask - a 32 bit mask of (usually) 1 bit length, outside the area
+specified by dscpmask.  This represents a conditional operation flag
+whereby the DSCP is only restored if the flag is set.  This is useful to
+implement a 'one shot' iptables based classification where the
+'complicated' iptables rules are only run once to classify the
+connection on initial (egress) packet and subsequent packets are all
+marked/restored with the same DSCP.  A mask of zero disables the
+conditional behaviour ie. the conntrack mark DSCP bits are always
+restored to the ip diffserv field (assuming the conntrack entry is found
+& the skb is an ipv4/ipv6 type)
+
+e.g. dscpmask 0xfc000000 statemask 0x01000000
+
+|----0xFC----conntrack mark----000000---|
+| Bits 31-26 | bit 25 | bit24 |~~~ Bit 0|
+| DSCP       | unused | flag  |unused   |
+|-----------------------0x01---000000---|
+      |                   |
+      |                   |
+      ---|             Conditional flag
+         v             only restore if set
+|-ip diffserv-|
+| 6 bits      |
+|-------------|
+
+The skb mark restore mode (cpmark):
+
+This mode copies the firewall conntrack mark to the skb's mark field.
+It is completely the functional equivalent of the existing act_connmark
+action with the additional feature of being able to apply a mask to the
+restored value.
+
+Parameters related to skb mark restore mode:
+
+mask - a 32 bit mask applied to the firewall conntrack mark to mask out
+bits unwanted for restoration.  This can be useful where the conntrack
+mark is being used for different purposes by different applications.  If
+not specified and by default the whole mark field is copied (i.e.
+default mask of 0xffffffff)
+
+e.g. mask 0x00ffffff to mask out the top 8 bits being used by the
+aforementioned DSCP restore mode.
+
+|----0x00----conntrack mark----ffffff---|
+| Bits 31-24 |                          |
+| DSCP & flag|      some value here     |
+|---------------------------------------|
+			|
+			|
+			v
+|------------skb mark-------------------|
+|            |                          |
+|  zeroed    |                          |
+|---------------------------------------|
+
+Overall parameters:
+
+zone - conntrack zone
+
+control - action related control (reclassify | pipe | drop | continue |
+ok | goto chain <CHAIN_INDEX>)
+
+Signed-off-by: Kevin Darbyshire-Bryant <ldir@darbyshire-bryant.me.uk>
+Reviewed-by: Toke Høiland-Jørgensen <toke@redhat.com>
+Acked-by: Cong Wang <xiyou.wangcong@gmail.com>
+Signed-off-by: David S. Miller <davem@davemloft.net>
+
+Backport
+Signed-off-by: Kevin Darbyshire-Bryant <ldir@darbyshire-bryant.me.uk>
+---
+ include/net/tc_act/tc_ctinfo.h            |  33 ++
+ include/uapi/linux/pkt_cls.h              |   3 +-
+ include/uapi/linux/tc_act/tc_ctinfo.h     |  29 ++
+ net/sched/Kconfig                         |  17 +
+ net/sched/Makefile                        |   1 +
+ net/sched/act_ctinfo.c                    | 420 ++++++++++++++++++++++
+ tools/testing/selftests/tc-testing/config |   1 +
+ 7 files changed, 503 insertions(+), 1 deletion(-)
+ create mode 100644 include/net/tc_act/tc_ctinfo.h
+ create mode 100644 include/uapi/linux/tc_act/tc_ctinfo.h
+ create mode 100644 net/sched/act_ctinfo.c
+
+--- /dev/null
++++ b/include/net/tc_act/tc_ctinfo.h
+@@ -0,0 +1,33 @@
++/* SPDX-License-Identifier: GPL-2.0 */
++#ifndef __NET_TC_CTINFO_H
++#define __NET_TC_CTINFO_H
++
++#include <net/act_api.h>
++
++struct tcf_ctinfo_params {
++	struct rcu_head rcu;
++	struct net *net;
++	u32 dscpmask;
++	u32 dscpstatemask;
++	u32 cpmarkmask;
++	u16 zone;
++	u8 mode;
++	u8 dscpmaskshift;
++};
++
++struct tcf_ctinfo {
++	struct tc_action common;
++	struct tcf_ctinfo_params __rcu *params;
++	u64 stats_dscp_set;
++	u64 stats_dscp_error;
++	u64 stats_cpmark_set;
++};
++
++enum {
++	CTINFO_MODE_DSCP	= BIT(0),
++	CTINFO_MODE_CPMARK	= BIT(1)
++};
++
++#define to_ctinfo(a) ((struct tcf_ctinfo *)a)
++
++#endif /* __NET_TC_CTINFO_H */
+--- a/include/uapi/linux/pkt_cls.h
++++ b/include/uapi/linux/pkt_cls.h
+@@ -68,7 +68,8 @@ enum {
+ 	TCA_ID_UNSPEC=0,
+ 	TCA_ID_POLICE=1,
+ 	/* other actions go here */
+-	__TCA_ID_MAX=255
++	TCA_ID_CTINFO,
++	__TCA_ID_MAX = 255
+ };
+ 
+ #define TCA_ID_MAX __TCA_ID_MAX
+--- /dev/null
++++ b/include/uapi/linux/tc_act/tc_ctinfo.h
+@@ -0,0 +1,29 @@
++/* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */
++#ifndef __UAPI_TC_CTINFO_H
++#define __UAPI_TC_CTINFO_H
++
++#include <linux/types.h>
++#include <linux/pkt_cls.h>
++
++struct tc_ctinfo {
++	tc_gen;
++};
++
++enum {
++	TCA_CTINFO_UNSPEC,
++	TCA_CTINFO_PAD,
++	TCA_CTINFO_TM,
++	TCA_CTINFO_ACT,
++	TCA_CTINFO_ZONE,
++	TCA_CTINFO_PARMS_DSCP_MASK,
++	TCA_CTINFO_PARMS_DSCP_STATEMASK,
++	TCA_CTINFO_PARMS_CPMARK_MASK,
++	TCA_CTINFO_STATS_DSCP_SET,
++	TCA_CTINFO_STATS_DSCP_ERROR,
++	TCA_CTINFO_STATS_CPMARK_SET,
++	__TCA_CTINFO_MAX
++};
++
++#define TCA_CTINFO_MAX (__TCA_CTINFO_MAX - 1)
++
++#endif
+--- a/net/sched/Kconfig
++++ b/net/sched/Kconfig
+@@ -866,6 +866,23 @@ config NET_ACT_CONNMARK
+ 	  To compile this code as a module, choose M here: the
+ 	  module will be called act_connmark.
+ 
++config NET_ACT_CTINFO
++        tristate "Netfilter Connection Mark Actions"
++        depends on NET_CLS_ACT && NETFILTER && IP_NF_IPTABLES
++        depends on NF_CONNTRACK && NF_CONNTRACK_MARK
++        help
++	  Say Y here to allow transfer of a connmark stored information.
++	  Current actions transfer connmark stored DSCP into
++	  ipv4/v6 diffserv and/or to transfer connmark to packet
++	  mark.  Both are useful for restoring egress based marks
++	  back onto ingress connections for qdisc priority mapping
++	  purposes.
++
++	  If unsure, say N.
++
++	  To compile this code as a module, choose M here: the
++	  module will be called act_ctinfo.
++
+ config NET_ACT_SKBMOD
+         tristate "skb data modification action"
+         depends on NET_CLS_ACT
+--- a/net/sched/Makefile
++++ b/net/sched/Makefile
+@@ -21,6 +21,7 @@ obj-$(CONFIG_NET_ACT_CSUM)	+= act_csum.o
+ obj-$(CONFIG_NET_ACT_VLAN)	+= act_vlan.o
+ obj-$(CONFIG_NET_ACT_BPF)	+= act_bpf.o
+ obj-$(CONFIG_NET_ACT_CONNMARK)	+= act_connmark.o
++obj-$(CONFIG_NET_ACT_CTINFO)	+= act_ctinfo.o
+ obj-$(CONFIG_NET_ACT_SKBMOD)	+= act_skbmod.o
+ obj-$(CONFIG_NET_ACT_IFE)	+= act_ife.o
+ obj-$(CONFIG_NET_IFE_SKBMARK)	+= act_meta_mark.o
+--- /dev/null
++++ b/net/sched/act_ctinfo.c
+@@ -0,0 +1,420 @@
++// SPDX-License-Identifier: GPL-2.0+
++/* net/sched/act_ctinfo.c  netfilter ctinfo connmark actions
++ *
++ * Copyright (c) 2019 Kevin Darbyshire-Bryant <ldir@darbyshire-bryant.me.uk>
++ */
++
++#include <linux/module.h>
++#include <linux/init.h>
++#include <linux/kernel.h>
++#include <linux/skbuff.h>
++#include <linux/rtnetlink.h>
++#include <linux/pkt_cls.h>
++#include <linux/ip.h>
++#include <linux/ipv6.h>
++#include <net/netlink.h>
++#include <net/pkt_sched.h>
++#include <net/act_api.h>
++#include <net/pkt_cls.h>
++#include <uapi/linux/tc_act/tc_ctinfo.h>
++#include <net/tc_act/tc_ctinfo.h>
++
++#include <net/netfilter/nf_conntrack.h>
++#include <net/netfilter/nf_conntrack_core.h>
++#include <net/netfilter/nf_conntrack_ecache.h>
++#include <net/netfilter/nf_conntrack_zones.h>
++
++static struct tc_action_ops act_ctinfo_ops;
++static unsigned int ctinfo_net_id;
++
++static void tcf_ctinfo_dscp_set(struct nf_conn *ct, struct tcf_ctinfo *ca,
++				struct tcf_ctinfo_params *cp,
++				struct sk_buff *skb, int wlen, int proto)
++{
++	u8 dscp, newdscp;
++
++	newdscp = (((ct->mark & cp->dscpmask) >> cp->dscpmaskshift) << 2) &
++		     ~INET_ECN_MASK;
++
++	switch (proto) {
++	case NFPROTO_IPV4:
++		dscp = ipv4_get_dsfield(ip_hdr(skb)) & ~INET_ECN_MASK;
++		if (dscp != newdscp) {
++			if (likely(!skb_try_make_writable(skb, wlen))) {
++				ipv4_change_dsfield(ip_hdr(skb),
++						    INET_ECN_MASK,
++						    newdscp);
++				ca->stats_dscp_set++;
++			} else {
++				ca->stats_dscp_error++;
++			}
++		}
++		break;
++	case NFPROTO_IPV6:
++		dscp = ipv6_get_dsfield(ipv6_hdr(skb)) & ~INET_ECN_MASK;
++		if (dscp != newdscp) {
++			if (likely(!skb_try_make_writable(skb, wlen))) {
++				ipv6_change_dsfield(ipv6_hdr(skb),
++						    INET_ECN_MASK,
++						    newdscp);
++				ca->stats_dscp_set++;
++			} else {
++				ca->stats_dscp_error++;
++			}
++		}
++		break;
++	default:
++		break;
++	}
++}
++
++static void tcf_ctinfo_cpmark_set(struct nf_conn *ct, struct tcf_ctinfo *ca,
++				  struct tcf_ctinfo_params *cp,
++				  struct sk_buff *skb)
++{
++	ca->stats_cpmark_set++;
++	skb->mark = ct->mark & cp->cpmarkmask;
++}
++
++static int tcf_ctinfo_act(struct sk_buff *skb, const struct tc_action *a,
++			  struct tcf_result *res)
++{
++	const struct nf_conntrack_tuple_hash *thash = NULL;
++	struct tcf_ctinfo *ca = to_ctinfo(a);
++	struct nf_conntrack_tuple tuple;
++	struct nf_conntrack_zone zone;
++	enum ip_conntrack_info ctinfo;
++	struct tcf_ctinfo_params *cp;
++	struct nf_conn *ct;
++	int proto, wlen;
++	int action;
++
++	cp = rcu_dereference_bh(ca->params);
++
++	tcf_lastuse_update(&ca->tcf_tm);
++	bstats_update(&ca->tcf_bstats, skb);
++	action = READ_ONCE(ca->tcf_action);
++
++	wlen = skb_network_offset(skb);
++	if (tc_skb_protocol(skb) == htons(ETH_P_IP)) {
++		wlen += sizeof(struct iphdr);
++		if (!pskb_may_pull(skb, wlen))
++			goto out;
++
++		proto = NFPROTO_IPV4;
++	} else if (tc_skb_protocol(skb) == htons(ETH_P_IPV6)) {
++		wlen += sizeof(struct ipv6hdr);
++		if (!pskb_may_pull(skb, wlen))
++			goto out;
++
++		proto = NFPROTO_IPV6;
++	} else {
++		goto out;
++	}
++
++	ct = nf_ct_get(skb, &ctinfo);
++	if (!ct) { /* look harder, usually ingress */
++		if (!nf_ct_get_tuplepr(skb, skb_network_offset(skb),
++				       proto, cp->net, &tuple))
++			goto out;
++		zone.id = cp->zone;
++		zone.dir = NF_CT_DEFAULT_ZONE_DIR;
++
++		thash = nf_conntrack_find_get(cp->net, &zone, &tuple);
++		if (!thash)
++			goto out;
++
++		ct = nf_ct_tuplehash_to_ctrack(thash);
++	}
++
++	if (cp->mode & CTINFO_MODE_DSCP)
++		if (!cp->dscpstatemask || (ct->mark & cp->dscpstatemask))
++			tcf_ctinfo_dscp_set(ct, ca, cp, skb, wlen, proto);
++
++	if (cp->mode & CTINFO_MODE_CPMARK)
++		tcf_ctinfo_cpmark_set(ct, ca, cp, skb);
++
++	if (thash)
++		nf_ct_put(ct);
++out:
++	return action;
++}
++
++static const struct nla_policy ctinfo_policy[TCA_CTINFO_MAX + 1] = {
++	[TCA_CTINFO_ACT]		  = { .len = sizeof(struct
++							    tc_ctinfo) },
++	[TCA_CTINFO_ZONE]		  = { .type = NLA_U16 },
++	[TCA_CTINFO_PARMS_DSCP_MASK]	  = { .type = NLA_U32 },
++	[TCA_CTINFO_PARMS_DSCP_STATEMASK] = { .type = NLA_U32 },
++	[TCA_CTINFO_PARMS_CPMARK_MASK]	  = { .type = NLA_U32 },
++};
++
++static int tcf_ctinfo_init(struct net *net, struct nlattr *nla,
++			   struct nlattr *est, struct tc_action **a,
++			   int ovr, int bind, bool rtnl_held,
++			   struct netlink_ext_ack *extack)
++{
++	struct tc_action_net *tn = net_generic(net, ctinfo_net_id);
++	u32 dscpmask = 0, dscpstatemask, index;
++	struct nlattr *tb[TCA_CTINFO_MAX + 1];
++	struct tcf_ctinfo_params *cp_new;
++/*	struct tcf_chain *goto_ch = NULL; */
++	struct tc_ctinfo *actparm;
++	struct tcf_ctinfo *ci;
++	u8 dscpmaskshift;
++	int ret = 0, err;
++
++	if (!nla) {
++		NL_SET_ERR_MSG_MOD(extack, "ctinfo requires attributes to be passed");
++		return -EINVAL;
++	}
++
++	err = nla_parse_nested(tb, TCA_CTINFO_MAX, nla, ctinfo_policy, extack);
++	if (err < 0)
++		return err;
++
++	if (!tb[TCA_CTINFO_ACT]) {
++		NL_SET_ERR_MSG_MOD(extack,
++				   "Missing required TCA_CTINFO_ACT attribute");
++		return -EINVAL;
++	}
++	actparm = nla_data(tb[TCA_CTINFO_ACT]);
++
++	/* do some basic validation here before dynamically allocating things */
++	/* that we would otherwise have to clean up.			      */
++	if (tb[TCA_CTINFO_PARMS_DSCP_MASK]) {
++		dscpmask = nla_get_u32(tb[TCA_CTINFO_PARMS_DSCP_MASK]);
++		/* need contiguous 6 bit mask */
++		dscpmaskshift = dscpmask ? __ffs(dscpmask) : 0;
++		if ((~0 & (dscpmask >> dscpmaskshift)) != 0x3f) {
++			NL_SET_ERR_MSG_ATTR(extack,
++					    tb[TCA_CTINFO_PARMS_DSCP_MASK],
++					    "dscp mask must be 6 contiguous bits");
++			return -EINVAL;
++		}
++		dscpstatemask = tb[TCA_CTINFO_PARMS_DSCP_STATEMASK] ?
++			nla_get_u32(tb[TCA_CTINFO_PARMS_DSCP_STATEMASK]) : 0;
++		/* mask & statemask must not overlap */
++		if (dscpmask & dscpstatemask) {
++			NL_SET_ERR_MSG_ATTR(extack,
++					    tb[TCA_CTINFO_PARMS_DSCP_STATEMASK],
++					    "dscp statemask must not overlap dscp mask");
++			return -EINVAL;
++		}
++	}
++
++	/* done the validation:now to the actual action allocation */
++	index = actparm->index;
++	err = tcf_idr_check_alloc(tn, &index, a, bind);
++	if (!err) {
++		ret = tcf_idr_create(tn, index, est, a,
++				     &act_ctinfo_ops, bind, false);
++		if (ret) {
++			tcf_idr_cleanup(tn, index);
++			return ret;
++		}
++		ret = ACT_P_CREATED;
++	} else if (err > 0) {
++		if (bind) /* don't override defaults */
++			return 0;
++		if (!ovr) {
++			tcf_idr_release(*a, bind);
++			return -EEXIST;
++		}
++	} else {
++		return err;
++	}
++
++/*	err = tcf_action_check_ctrlact(actparm->action, tp, &goto_ch, extack);
++	if (err < 0)
++		goto release_idr;
++		*/
++
++	ci = to_ctinfo(*a);
++
++	cp_new = kzalloc(sizeof(*cp_new), GFP_KERNEL);
++	if (unlikely(!cp_new)) {
++		err = -ENOMEM;
++		goto put_chain;
++	}
++
++	cp_new->net = net;
++	cp_new->zone = tb[TCA_CTINFO_ZONE] ?
++			nla_get_u16(tb[TCA_CTINFO_ZONE]) : 0;
++	if (dscpmask) {
++		cp_new->dscpmask = dscpmask;
++		cp_new->dscpmaskshift = dscpmaskshift;
++		cp_new->dscpstatemask = dscpstatemask;
++		cp_new->mode |= CTINFO_MODE_DSCP;
++	}
++
++	if (tb[TCA_CTINFO_PARMS_CPMARK_MASK]) {
++		cp_new->cpmarkmask =
++				nla_get_u32(tb[TCA_CTINFO_PARMS_CPMARK_MASK]);
++		cp_new->mode |= CTINFO_MODE_CPMARK;
++	}
++
++	spin_lock_bh(&ci->tcf_lock);
++/*	goto_ch = tcf_action_set_ctrlact(*a, actparm->action, goto_ch); */
++	ci->tcf_action = actparm->action;
++	rcu_swap_protected(ci->params, cp_new,
++			   lockdep_is_held(&ci->tcf_lock));
++	spin_unlock_bh(&ci->tcf_lock);
++
++/*	if (goto_ch)
++		tcf_chain_put_by_act(goto_ch); */
++	if (cp_new)
++		kfree_rcu(cp_new, rcu);
++
++	if (ret == ACT_P_CREATED)
++		tcf_idr_insert(tn, *a);
++
++	return ret;
++
++put_chain:
++/*	if (goto_ch)
++		tcf_chain_put_by_act(goto_ch);
++release_idr: */
++	tcf_idr_release(*a, bind);
++	return err;
++}
++
++static int tcf_ctinfo_dump(struct sk_buff *skb, struct tc_action *a,
++			   int bind, int ref)
++{
++	struct tcf_ctinfo *ci = to_ctinfo(a);
++	struct tc_ctinfo opt = {
++		.index   = ci->tcf_index,
++		.refcnt  = refcount_read(&ci->tcf_refcnt) - ref,
++		.bindcnt = atomic_read(&ci->tcf_bindcnt) - bind,
++	};
++	unsigned char *b = skb_tail_pointer(skb);
++	struct tcf_ctinfo_params *cp;
++	struct tcf_t t;
++
++	spin_lock_bh(&ci->tcf_lock);
++	cp = rcu_dereference_protected(ci->params,
++				       lockdep_is_held(&ci->tcf_lock));
++
++	tcf_tm_dump(&t, &ci->tcf_tm);
++	if (nla_put_64bit(skb, TCA_CTINFO_TM, sizeof(t), &t, TCA_CTINFO_PAD))
++		goto nla_put_failure;
++
++	opt.action = ci->tcf_action;
++	if (nla_put(skb, TCA_CTINFO_ACT, sizeof(opt), &opt))
++		goto nla_put_failure;
++
++	if (nla_put_u16(skb, TCA_CTINFO_ZONE, cp->zone))
++		goto nla_put_failure;
++
++	if (cp->mode & CTINFO_MODE_DSCP) {
++		if (nla_put_u32(skb, TCA_CTINFO_PARMS_DSCP_MASK,
++				cp->dscpmask))
++			goto nla_put_failure;
++		if (nla_put_u32(skb, TCA_CTINFO_PARMS_DSCP_STATEMASK,
++				cp->dscpstatemask))
++			goto nla_put_failure;
++	}
++
++	if (cp->mode & CTINFO_MODE_CPMARK) {
++		if (nla_put_u32(skb, TCA_CTINFO_PARMS_CPMARK_MASK,
++				cp->cpmarkmask))
++			goto nla_put_failure;
++	}
++
++	if (nla_put_u64_64bit(skb, TCA_CTINFO_STATS_DSCP_SET,
++			      ci->stats_dscp_set, TCA_CTINFO_PAD))
++		goto nla_put_failure;
++
++	if (nla_put_u64_64bit(skb, TCA_CTINFO_STATS_DSCP_ERROR,
++			      ci->stats_dscp_error, TCA_CTINFO_PAD))
++		goto nla_put_failure;
++
++	if (nla_put_u64_64bit(skb, TCA_CTINFO_STATS_CPMARK_SET,
++			      ci->stats_cpmark_set, TCA_CTINFO_PAD))
++		goto nla_put_failure;
++
++	spin_unlock_bh(&ci->tcf_lock);
++	return skb->len;
++
++nla_put_failure:
++	spin_unlock_bh(&ci->tcf_lock);
++	nlmsg_trim(skb, b);
++	return -1;
++}
++
++static int tcf_ctinfo_walker(struct net *net, struct sk_buff *skb,
++			     struct netlink_callback *cb, int type,
++			     const struct tc_action_ops *ops,
++			     struct netlink_ext_ack *extack)
++{
++	struct tc_action_net *tn = net_generic(net, ctinfo_net_id);
++
++	return tcf_generic_walker(tn, skb, cb, type, ops, extack);
++}
++
++static int tcf_ctinfo_search(struct net *net, struct tc_action **a, u32 index,
++			     struct netlink_ext_ack *extack)
++{
++	struct tc_action_net *tn = net_generic(net, ctinfo_net_id);
++
++	return tcf_idr_search(tn, a, index);
++}
++
++static void tcf_ctinfo_cleanup(struct tc_action *a)
++{
++	struct tcf_ctinfo *ci = to_ctinfo(a);
++	struct tcf_ctinfo_params *cp;
++
++	cp = rcu_dereference_protected(ci->params, 1);
++	if (cp)
++		kfree_rcu(cp, rcu);
++}
++
++static struct tc_action_ops act_ctinfo_ops = {
++	.kind	= "ctinfo",
++	.type	= TCA_ID_CTINFO,
++	.owner	= THIS_MODULE,
++	.act	= tcf_ctinfo_act,
++	.dump	= tcf_ctinfo_dump,
++	.init	= tcf_ctinfo_init,
++	.walk	= tcf_ctinfo_walker,
++	.cleanup= tcf_ctinfo_cleanup,
++	.lookup	= tcf_ctinfo_search,
++	.size	= sizeof(struct tcf_ctinfo),
++};
++
++static __net_init int ctinfo_init_net(struct net *net)
++{
++	struct tc_action_net *tn = net_generic(net, ctinfo_net_id);
++
++	return tc_action_net_init(net, tn, &act_ctinfo_ops);
++}
++
++static void __net_exit ctinfo_exit_net(struct list_head *net_list)
++{
++	tc_action_net_exit(net_list, ctinfo_net_id);
++}
++
++static struct pernet_operations ctinfo_net_ops = {
++	.init		= ctinfo_init_net,
++	.exit_batch	= ctinfo_exit_net,
++	.id		= &ctinfo_net_id,
++	.size		= sizeof(struct tc_action_net),
++};
++
++static int __init ctinfo_init_module(void)
++{
++	return tcf_register_action(&act_ctinfo_ops, &ctinfo_net_ops);
++}
++
++static void __exit ctinfo_cleanup_module(void)
++{
++	tcf_unregister_action(&act_ctinfo_ops, &ctinfo_net_ops);
++}
++
++module_init(ctinfo_init_module);
++module_exit(ctinfo_cleanup_module);
++MODULE_AUTHOR("Kevin Darbyshire-Bryant <ldir@darbyshire-bryant.me.uk>");
++MODULE_DESCRIPTION("Connection tracking mark actions");
++MODULE_LICENSE("GPL");
+--- a/tools/testing/selftests/tc-testing/config
++++ b/tools/testing/selftests/tc-testing/config
+@@ -38,6 +38,7 @@ CONFIG_NET_ACT_CSUM=m
+ CONFIG_NET_ACT_VLAN=m
+ CONFIG_NET_ACT_BPF=m
+ CONFIG_NET_ACT_CONNMARK=m
++CONFIG_NET_ACT_CONNCTINFO=m
+ CONFIG_NET_ACT_SKBMOD=m
+ CONFIG_NET_ACT_IFE=m
+ CONFIG_NET_ACT_TUNNEL_KEY=m
diff --git a/target/linux/generic/backport-5.4/450-v5.0-mtd-spinand-winbond-Add-support-for-W25N01GV.patch b/target/linux/generic/backport-5.4/450-v5.0-mtd-spinand-winbond-Add-support-for-W25N01GV.patch
new file mode 100644
index 0000000000..2024577b8f
--- /dev/null
+++ b/target/linux/generic/backport-5.4/450-v5.0-mtd-spinand-winbond-Add-support-for-W25N01GV.patch
@@ -0,0 +1,37 @@
+From 9a4d83074769d6ecf1f5c3fef0f183b09abf3726 Mon Sep 17 00:00:00 2001
+From: Robert Marko <robimarko@gmail.com>
+Date: Sat, 6 Oct 2018 17:36:42 +0200
+Subject: [PATCH 1/8] mtd: spinand: winbond: Add support for W25N01GV
+
+W25N01GV is a single die version of the already supported
+W25M02GV with half the capacity. Everything else is the
+same so introduce support for W25N01GV.
+
+Datasheet:http://www.winbond.com/resource-files/w25n01gv%20revl%20050918%20unsecured.pdf
+
+Tested on 8devices Jalapeno dev board under OpenWrt running 4.19-rc5.
+
+Signed-off-by: Robert Marko <robimarko@gmail.com>
+Reviewed-by: Boris Brezillon <boris.brezillon@bootlin.com>
+Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
+---
+ drivers/mtd/nand/spi/winbond.c | 8 ++++++++
+ 1 file changed, 8 insertions(+)
+
+--- a/drivers/mtd/nand/spi/winbond.c
++++ b/drivers/mtd/nand/spi/winbond.c
+@@ -84,6 +84,14 @@ static const struct spinand_info winbond
+ 		     0,
+ 		     SPINAND_ECCINFO(&w25m02gv_ooblayout, NULL),
+ 		     SPINAND_SELECT_TARGET(w25m02gv_select_target)),
++	SPINAND_INFO("W25N01GV", 0xAA,
++		     NAND_MEMORG(1, 2048, 64, 64, 1024, 1, 1, 1),
++		     NAND_ECCREQ(1, 512),
++		     SPINAND_INFO_OP_VARIANTS(&read_cache_variants,
++					      &write_cache_variants,
++					      &update_cache_variants),
++		     0,
++		     SPINAND_ECCINFO(&w25m02gv_ooblayout, NULL)),
+ };
+ 
+ /**
diff --git a/target/linux/generic/backport-5.4/451-v5.0-mtd-spinand-Add-initial-support-for-Toshiba-TC58CVG2.patch b/target/linux/generic/backport-5.4/451-v5.0-mtd-spinand-Add-initial-support-for-Toshiba-TC58CVG2.patch
new file mode 100644
index 0000000000..ed42f0024b
--- /dev/null
+++ b/target/linux/generic/backport-5.4/451-v5.0-mtd-spinand-Add-initial-support-for-Toshiba-TC58CVG2.patch
@@ -0,0 +1,188 @@
+From 10949af1681d5bb5cdbcc012815c6e40eec17d02 Mon Sep 17 00:00:00 2001
+From: Schrempf Frieder <frieder.schrempf@kontron.De>
+Date: Thu, 8 Nov 2018 08:32:11 +0000
+Subject: [PATCH 2/8] mtd: spinand: Add initial support for Toshiba TC58CVG2S0H
+MIME-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+
+Add minimal support for the Toshiba TC58CVG2S0H SPI NAND chip.
+
+Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de>
+Acked-by: Clément Péron <peron.clem@gmail.com>
+Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
+---
+ drivers/mtd/nand/spi/Makefile  |   2 +-
+ drivers/mtd/nand/spi/core.c    |   1 +
+ drivers/mtd/nand/spi/toshiba.c | 137 +++++++++++++++++++++++++++++++++
+ include/linux/mtd/spinand.h    |   1 +
+ 4 files changed, 140 insertions(+), 1 deletion(-)
+ create mode 100644 drivers/mtd/nand/spi/toshiba.c
+
+--- a/drivers/mtd/nand/spi/Makefile
++++ b/drivers/mtd/nand/spi/Makefile
+@@ -1,3 +1,3 @@
+ # SPDX-License-Identifier: GPL-2.0
+-spinand-objs := core.o macronix.o micron.o winbond.o
++spinand-objs := core.o macronix.o micron.o toshiba.o winbond.o
+ obj-$(CONFIG_MTD_SPI_NAND) += spinand.o
+--- a/drivers/mtd/nand/spi/core.c
++++ b/drivers/mtd/nand/spi/core.c
+@@ -764,6 +764,7 @@ static const struct nand_ops spinand_ops
+ static const struct spinand_manufacturer *spinand_manufacturers[] = {
+ 	&macronix_spinand_manufacturer,
+ 	&micron_spinand_manufacturer,
++	&toshiba_spinand_manufacturer,
+ 	&winbond_spinand_manufacturer,
+ };
+ 
+--- /dev/null
++++ b/drivers/mtd/nand/spi/toshiba.c
+@@ -0,0 +1,137 @@
++// SPDX-License-Identifier: GPL-2.0
++/*
++ * Copyright (c) 2018 exceet electronics GmbH
++ * Copyright (c) 2018 Kontron Electronics GmbH
++ *
++ * Author: Frieder Schrempf <frieder.schrempf@kontron.de>
++ */
++
++#include <linux/device.h>
++#include <linux/kernel.h>
++#include <linux/mtd/spinand.h>
++
++#define SPINAND_MFR_TOSHIBA		0x98
++#define TOSH_STATUS_ECC_HAS_BITFLIPS_T	(3 << 4)
++
++static SPINAND_OP_VARIANTS(read_cache_variants,
++		SPINAND_PAGE_READ_FROM_CACHE_X4_OP(0, 1, NULL, 0),
++		SPINAND_PAGE_READ_FROM_CACHE_X2_OP(0, 1, NULL, 0),
++		SPINAND_PAGE_READ_FROM_CACHE_OP(true, 0, 1, NULL, 0),
++		SPINAND_PAGE_READ_FROM_CACHE_OP(false, 0, 1, NULL, 0));
++
++static SPINAND_OP_VARIANTS(write_cache_variants,
++		SPINAND_PROG_LOAD(true, 0, NULL, 0));
++
++static SPINAND_OP_VARIANTS(update_cache_variants,
++		SPINAND_PROG_LOAD(false, 0, NULL, 0));
++
++static int tc58cvg2s0h_ooblayout_ecc(struct mtd_info *mtd, int section,
++				     struct mtd_oob_region *region)
++{
++	if (section > 7)
++		return -ERANGE;
++
++	region->offset = 128 + 16 * section;
++	region->length = 16;
++
++	return 0;
++}
++
++static int tc58cvg2s0h_ooblayout_free(struct mtd_info *mtd, int section,
++				      struct mtd_oob_region *region)
++{
++	if (section > 0)
++		return -ERANGE;
++
++	/* 2 bytes reserved for BBM */
++	region->offset = 2;
++	region->length = 126;
++
++	return 0;
++}
++
++static const struct mtd_ooblayout_ops tc58cvg2s0h_ooblayout = {
++	.ecc = tc58cvg2s0h_ooblayout_ecc,
++	.free = tc58cvg2s0h_ooblayout_free,
++};
++
++static int tc58cvg2s0h_ecc_get_status(struct spinand_device *spinand,
++				      u8 status)
++{
++	struct nand_device *nand = spinand_to_nand(spinand);
++	u8 mbf = 0;
++	struct spi_mem_op op = SPINAND_GET_FEATURE_OP(0x30, &mbf);
++
++	switch (status & STATUS_ECC_MASK) {
++	case STATUS_ECC_NO_BITFLIPS:
++		return 0;
++
++	case STATUS_ECC_UNCOR_ERROR:
++		return -EBADMSG;
++
++	case STATUS_ECC_HAS_BITFLIPS:
++	case TOSH_STATUS_ECC_HAS_BITFLIPS_T:
++		/*
++		 * Let's try to retrieve the real maximum number of bitflips
++		 * in order to avoid forcing the wear-leveling layer to move
++		 * data around if it's not necessary.
++		 */
++		if (spi_mem_exec_op(spinand->spimem, &op))
++			return nand->eccreq.strength;
++
++		mbf >>= 4;
++
++		if (WARN_ON(mbf > nand->eccreq.strength || !mbf))
++			return nand->eccreq.strength;
++
++		return mbf;
++
++	default:
++		break;
++	}
++
++	return -EINVAL;
++}
++
++static const struct spinand_info toshiba_spinand_table[] = {
++	SPINAND_INFO("TC58CVG2S0H", 0xCD,
++		     NAND_MEMORG(1, 4096, 256, 64, 2048, 1, 1, 1),
++		     NAND_ECCREQ(8, 512),
++		     SPINAND_INFO_OP_VARIANTS(&read_cache_variants,
++					      &write_cache_variants,
++					      &update_cache_variants),
++		     SPINAND_HAS_QE_BIT,
++		     SPINAND_ECCINFO(&tc58cvg2s0h_ooblayout,
++				     tc58cvg2s0h_ecc_get_status)),
++};
++
++static int toshiba_spinand_detect(struct spinand_device *spinand)
++{
++	u8 *id = spinand->id.data;
++	int ret;
++
++	/*
++	 * Toshiba SPI NAND read ID needs a dummy byte,
++	 * so the first byte in id is garbage.
++	 */
++	if (id[1] != SPINAND_MFR_TOSHIBA)
++		return 0;
++
++	ret = spinand_match_and_init(spinand, toshiba_spinand_table,
++				     ARRAY_SIZE(toshiba_spinand_table),
++				     id[2]);
++	if (ret)
++		return ret;
++
++	return 1;
++}
++
++static const struct spinand_manufacturer_ops toshiba_spinand_manuf_ops = {
++	.detect = toshiba_spinand_detect,
++};
++
++const struct spinand_manufacturer toshiba_spinand_manufacturer = {
++	.id = SPINAND_MFR_TOSHIBA,
++	.name = "Toshiba",
++	.ops = &toshiba_spinand_manuf_ops,
++};
+--- a/include/linux/mtd/spinand.h
++++ b/include/linux/mtd/spinand.h
+@@ -196,6 +196,7 @@ struct spinand_manufacturer {
+ /* SPI NAND manufacturers */
+ extern const struct spinand_manufacturer macronix_spinand_manufacturer;
+ extern const struct spinand_manufacturer micron_spinand_manufacturer;
++extern const struct spinand_manufacturer toshiba_spinand_manufacturer;
+ extern const struct spinand_manufacturer winbond_spinand_manufacturer;
+ 
+ /**
diff --git a/target/linux/generic/backport-5.4/452-v5.0-mtd-spinand-add-support-for-GigaDevice-GD5FxGQ4xA.patch b/target/linux/generic/backport-5.4/452-v5.0-mtd-spinand-add-support-for-GigaDevice-GD5FxGQ4xA.patch
new file mode 100644
index 0000000000..4e6f18a4cb
--- /dev/null
+++ b/target/linux/generic/backport-5.4/452-v5.0-mtd-spinand-add-support-for-GigaDevice-GD5FxGQ4xA.patch
@@ -0,0 +1,196 @@
+From c93c613214ac70c87beab5422a60077bf126b855 Mon Sep 17 00:00:00 2001
+From: Chuanhong Guo <gch981213@gmail.com>
+Date: Wed, 28 Nov 2018 21:07:25 +0800
+Subject: [PATCH 3/8] mtd: spinand: add support for GigaDevice GD5FxGQ4xA
+
+Add support for GigaDevice GD5F1G/2G/4GQ4xA SPI NAND.
+
+Signed-off-by: Chuanhong Guo <gch981213@gmail.com>
+Reviewed-by: Frieder Schrempf <frieder.schrempf@kontron.de>
+Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
+---
+ drivers/mtd/nand/spi/Makefile     |   2 +-
+ drivers/mtd/nand/spi/core.c       |   1 +
+ drivers/mtd/nand/spi/gigadevice.c | 148 ++++++++++++++++++++++++++++++
+ include/linux/mtd/spinand.h       |   1 +
+ 4 files changed, 151 insertions(+), 1 deletion(-)
+ create mode 100644 drivers/mtd/nand/spi/gigadevice.c
+
+--- a/drivers/mtd/nand/spi/Makefile
++++ b/drivers/mtd/nand/spi/Makefile
+@@ -1,3 +1,3 @@
+ # SPDX-License-Identifier: GPL-2.0
+-spinand-objs := core.o macronix.o micron.o toshiba.o winbond.o
++spinand-objs := core.o gigadevice.o macronix.o micron.o toshiba.o winbond.o
+ obj-$(CONFIG_MTD_SPI_NAND) += spinand.o
+--- a/drivers/mtd/nand/spi/core.c
++++ b/drivers/mtd/nand/spi/core.c
+@@ -762,6 +762,7 @@ static const struct nand_ops spinand_ops
+ };
+ 
+ static const struct spinand_manufacturer *spinand_manufacturers[] = {
++	&gigadevice_spinand_manufacturer,
+ 	&macronix_spinand_manufacturer,
+ 	&micron_spinand_manufacturer,
+ 	&toshiba_spinand_manufacturer,
+--- /dev/null
++++ b/drivers/mtd/nand/spi/gigadevice.c
+@@ -0,0 +1,148 @@
++// SPDX-License-Identifier: GPL-2.0
++/*
++ * Author:
++ *	Chuanhong Guo <gch981213@gmail.com>
++ */
++
++#include <linux/device.h>
++#include <linux/kernel.h>
++#include <linux/mtd/spinand.h>
++
++#define SPINAND_MFR_GIGADEVICE			0xC8
++#define GD5FXGQ4XA_STATUS_ECC_1_7_BITFLIPS	(1 << 4)
++#define GD5FXGQ4XA_STATUS_ECC_8_BITFLIPS	(3 << 4)
++
++static SPINAND_OP_VARIANTS(read_cache_variants,
++		SPINAND_PAGE_READ_FROM_CACHE_QUADIO_OP(0, 2, NULL, 0),
++		SPINAND_PAGE_READ_FROM_CACHE_X4_OP(0, 1, NULL, 0),
++		SPINAND_PAGE_READ_FROM_CACHE_DUALIO_OP(0, 1, NULL, 0),
++		SPINAND_PAGE_READ_FROM_CACHE_X2_OP(0, 1, NULL, 0),
++		SPINAND_PAGE_READ_FROM_CACHE_OP(true, 0, 1, NULL, 0),
++		SPINAND_PAGE_READ_FROM_CACHE_OP(false, 0, 1, NULL, 0));
++
++static SPINAND_OP_VARIANTS(write_cache_variants,
++		SPINAND_PROG_LOAD_X4(true, 0, NULL, 0),
++		SPINAND_PROG_LOAD(true, 0, NULL, 0));
++
++static SPINAND_OP_VARIANTS(update_cache_variants,
++		SPINAND_PROG_LOAD_X4(false, 0, NULL, 0),
++		SPINAND_PROG_LOAD(false, 0, NULL, 0));
++
++static int gd5fxgq4xa_ooblayout_ecc(struct mtd_info *mtd, int section,
++				  struct mtd_oob_region *region)
++{
++	if (section > 3)
++		return -ERANGE;
++
++	region->offset = (16 * section) + 8;
++	region->length = 8;
++
++	return 0;
++}
++
++static int gd5fxgq4xa_ooblayout_free(struct mtd_info *mtd, int section,
++				   struct mtd_oob_region *region)
++{
++	if (section > 3)
++		return -ERANGE;
++
++	if (section) {
++		region->offset = 16 * section;
++		region->length = 8;
++	} else {
++		/* section 0 has one byte reserved for bad block mark */
++		region->offset = 1;
++		region->length = 7;
++	}
++	return 0;
++}
++
++static int gd5fxgq4xa_ecc_get_status(struct spinand_device *spinand,
++					 u8 status)
++{
++	switch (status & STATUS_ECC_MASK) {
++	case STATUS_ECC_NO_BITFLIPS:
++		return 0;
++
++	case GD5FXGQ4XA_STATUS_ECC_1_7_BITFLIPS:
++		/* 1-7 bits are flipped. return the maximum. */
++		return 7;
++
++	case GD5FXGQ4XA_STATUS_ECC_8_BITFLIPS:
++		return 8;
++
++	case STATUS_ECC_UNCOR_ERROR:
++		return -EBADMSG;
++
++	default:
++		break;
++	}
++
++	return -EINVAL;
++}
++
++static const struct mtd_ooblayout_ops gd5fxgq4xa_ooblayout = {
++	.ecc = gd5fxgq4xa_ooblayout_ecc,
++	.free = gd5fxgq4xa_ooblayout_free,
++};
++
++static const struct spinand_info gigadevice_spinand_table[] = {
++	SPINAND_INFO("GD5F1GQ4xA", 0xF1,
++		     NAND_MEMORG(1, 2048, 64, 64, 1024, 1, 1, 1),
++		     NAND_ECCREQ(8, 512),
++		     SPINAND_INFO_OP_VARIANTS(&read_cache_variants,
++					      &write_cache_variants,
++					      &update_cache_variants),
++		     0,
++		     SPINAND_ECCINFO(&gd5fxgq4xa_ooblayout,
++				     gd5fxgq4xa_ecc_get_status)),
++	SPINAND_INFO("GD5F2GQ4xA", 0xF2,
++		     NAND_MEMORG(1, 2048, 64, 64, 2048, 1, 1, 1),
++		     NAND_ECCREQ(8, 512),
++		     SPINAND_INFO_OP_VARIANTS(&read_cache_variants,
++					      &write_cache_variants,
++					      &update_cache_variants),
++		     0,
++		     SPINAND_ECCINFO(&gd5fxgq4xa_ooblayout,
++				     gd5fxgq4xa_ecc_get_status)),
++	SPINAND_INFO("GD5F4GQ4xA", 0xF4,
++		     NAND_MEMORG(1, 2048, 64, 64, 4096, 1, 1, 1),
++		     NAND_ECCREQ(8, 512),
++		     SPINAND_INFO_OP_VARIANTS(&read_cache_variants,
++					      &write_cache_variants,
++					      &update_cache_variants),
++		     0,
++		     SPINAND_ECCINFO(&gd5fxgq4xa_ooblayout,
++				     gd5fxgq4xa_ecc_get_status)),
++};
++
++static int gigadevice_spinand_detect(struct spinand_device *spinand)
++{
++	u8 *id = spinand->id.data;
++	int ret;
++
++	/*
++	 * For GD NANDs, There is an address byte needed to shift in before IDs
++	 * are read out, so the first byte in raw_id is dummy.
++	 */
++	if (id[1] != SPINAND_MFR_GIGADEVICE)
++		return 0;
++
++	ret = spinand_match_and_init(spinand, gigadevice_spinand_table,
++				     ARRAY_SIZE(gigadevice_spinand_table),
++				     id[2]);
++	if (ret)
++		return ret;
++
++	return 1;
++}
++
++static const struct spinand_manufacturer_ops gigadevice_spinand_manuf_ops = {
++	.detect = gigadevice_spinand_detect,
++};
++
++const struct spinand_manufacturer gigadevice_spinand_manufacturer = {
++	.id = SPINAND_MFR_GIGADEVICE,
++	.name = "GigaDevice",
++	.ops = &gigadevice_spinand_manuf_ops,
++};
+--- a/include/linux/mtd/spinand.h
++++ b/include/linux/mtd/spinand.h
+@@ -194,6 +194,7 @@ struct spinand_manufacturer {
+ };
+ 
+ /* SPI NAND manufacturers */
++extern const struct spinand_manufacturer gigadevice_spinand_manufacturer;
+ extern const struct spinand_manufacturer macronix_spinand_manufacturer;
+ extern const struct spinand_manufacturer micron_spinand_manufacturer;
+ extern const struct spinand_manufacturer toshiba_spinand_manufacturer;
diff --git a/target/linux/generic/backport-5.4/455-v5.1-mtd-spinand-Add-support-for-all-Toshiba-Memory-produ.patch b/target/linux/generic/backport-5.4/455-v5.1-mtd-spinand-Add-support-for-all-Toshiba-Memory-produ.patch
new file mode 100644
index 0000000000..aad82dcf7a
--- /dev/null
+++ b/target/linux/generic/backport-5.4/455-v5.1-mtd-spinand-Add-support-for-all-Toshiba-Memory-produ.patch
@@ -0,0 +1,136 @@
+From db214513f62fd13c0a9af3bd5c5d634dba37e65d Mon Sep 17 00:00:00 2001
+From: Yoshio Furuyama <tmcmc-mb-yfuruyama7@ml.toshiba.co.jp>
+Date: Wed, 16 Jan 2019 14:53:19 +0900
+Subject: [PATCH 7/8] mtd: spinand: Add support for all Toshiba Memory products
+
+Add device table for Toshiba Memory products.
+Also, generalize OOB layout structure and function names.
+
+Signed-off-by: Yoshio Furuyama <tmcmc-mb-yfuruyama7@ml.toshiba.co.jp>
+Reviewed-by: Frieder Schrempf <frieder.schrempf@kontron.de>
+Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
+---
+ drivers/mtd/nand/spi/toshiba.c | 79 ++++++++++++++++++++++++++++------
+ 1 file changed, 65 insertions(+), 14 deletions(-)
+
+--- a/drivers/mtd/nand/spi/toshiba.c
++++ b/drivers/mtd/nand/spi/toshiba.c
+@@ -25,19 +25,19 @@ static SPINAND_OP_VARIANTS(write_cache_v
+ static SPINAND_OP_VARIANTS(update_cache_variants,
+ 		SPINAND_PROG_LOAD(false, 0, NULL, 0));
+ 
+-static int tc58cvg2s0h_ooblayout_ecc(struct mtd_info *mtd, int section,
++static int tc58cxgxsx_ooblayout_ecc(struct mtd_info *mtd, int section,
+ 				     struct mtd_oob_region *region)
+ {
+-	if (section > 7)
++	if (section > 0)
+ 		return -ERANGE;
+ 
+-	region->offset = 128 + 16 * section;
+-	region->length = 16;
++	region->offset = mtd->oobsize / 2;
++	region->length = mtd->oobsize / 2;
+ 
+ 	return 0;
+ }
+ 
+-static int tc58cvg2s0h_ooblayout_free(struct mtd_info *mtd, int section,
++static int tc58cxgxsx_ooblayout_free(struct mtd_info *mtd, int section,
+ 				      struct mtd_oob_region *region)
+ {
+ 	if (section > 0)
+@@ -45,17 +45,17 @@ static int tc58cvg2s0h_ooblayout_free(st
+ 
+ 	/* 2 bytes reserved for BBM */
+ 	region->offset = 2;
+-	region->length = 126;
++	region->length = (mtd->oobsize / 2) - 2;
+ 
+ 	return 0;
+ }
+ 
+-static const struct mtd_ooblayout_ops tc58cvg2s0h_ooblayout = {
+-	.ecc = tc58cvg2s0h_ooblayout_ecc,
+-	.free = tc58cvg2s0h_ooblayout_free,
++static const struct mtd_ooblayout_ops tc58cxgxsx_ooblayout = {
++	.ecc = tc58cxgxsx_ooblayout_ecc,
++	.free = tc58cxgxsx_ooblayout_free,
+ };
+ 
+-static int tc58cvg2s0h_ecc_get_status(struct spinand_device *spinand,
++static int tc58cxgxsx_ecc_get_status(struct spinand_device *spinand,
+ 				      u8 status)
+ {
+ 	struct nand_device *nand = spinand_to_nand(spinand);
+@@ -94,15 +94,66 @@ static int tc58cvg2s0h_ecc_get_status(st
+ }
+ 
+ static const struct spinand_info toshiba_spinand_table[] = {
+-	SPINAND_INFO("TC58CVG2S0H", 0xCD,
++	/* 3.3V 1Gb */
++	SPINAND_INFO("TC58CVG0S3", 0xC2,
++		     NAND_MEMORG(1, 2048, 128, 64, 1024, 1, 1, 1),
++		     NAND_ECCREQ(8, 512),
++		     SPINAND_INFO_OP_VARIANTS(&read_cache_variants,
++					      &write_cache_variants,
++					      &update_cache_variants),
++		     0,
++		     SPINAND_ECCINFO(&tc58cxgxsx_ooblayout,
++				     tc58cxgxsx_ecc_get_status)),
++	/* 3.3V 2Gb */
++	SPINAND_INFO("TC58CVG1S3", 0xCB,
++		     NAND_MEMORG(1, 2048, 128, 64, 2048, 1, 1, 1),
++		     NAND_ECCREQ(8, 512),
++		     SPINAND_INFO_OP_VARIANTS(&read_cache_variants,
++					      &write_cache_variants,
++					      &update_cache_variants),
++		     0,
++		     SPINAND_ECCINFO(&tc58cxgxsx_ooblayout,
++				     tc58cxgxsx_ecc_get_status)),
++	/* 3.3V 4Gb */
++	SPINAND_INFO("TC58CVG2S0", 0xCD,
++		     NAND_MEMORG(1, 4096, 256, 64, 2048, 1, 1, 1),
++		     NAND_ECCREQ(8, 512),
++		     SPINAND_INFO_OP_VARIANTS(&read_cache_variants,
++					      &write_cache_variants,
++					      &update_cache_variants),
++		     0,
++		     SPINAND_ECCINFO(&tc58cxgxsx_ooblayout,
++				     tc58cxgxsx_ecc_get_status)),
++	/* 1.8V 1Gb */
++	SPINAND_INFO("TC58CYG0S3", 0xB2,
++		     NAND_MEMORG(1, 2048, 128, 64, 1024, 1, 1, 1),
++		     NAND_ECCREQ(8, 512),
++		     SPINAND_INFO_OP_VARIANTS(&read_cache_variants,
++					      &write_cache_variants,
++					      &update_cache_variants),
++		     0,
++		     SPINAND_ECCINFO(&tc58cxgxsx_ooblayout,
++				     tc58cxgxsx_ecc_get_status)),
++	/* 1.8V 2Gb */
++	SPINAND_INFO("TC58CYG1S3", 0xBB,
++		     NAND_MEMORG(1, 2048, 128, 64, 2048, 1, 1, 1),
++		     NAND_ECCREQ(8, 512),
++		     SPINAND_INFO_OP_VARIANTS(&read_cache_variants,
++					      &write_cache_variants,
++					      &update_cache_variants),
++		     0,
++		     SPINAND_ECCINFO(&tc58cxgxsx_ooblayout,
++				     tc58cxgxsx_ecc_get_status)),
++	/* 1.8V 4Gb */
++	SPINAND_INFO("TC58CYG2S0", 0xBD,
+ 		     NAND_MEMORG(1, 4096, 256, 64, 2048, 1, 1, 1),
+ 		     NAND_ECCREQ(8, 512),
+ 		     SPINAND_INFO_OP_VARIANTS(&read_cache_variants,
+ 					      &write_cache_variants,
+ 					      &update_cache_variants),
+-		     SPINAND_HAS_QE_BIT,
+-		     SPINAND_ECCINFO(&tc58cvg2s0h_ooblayout,
+-				     tc58cvg2s0h_ecc_get_status)),
++		     0,
++		     SPINAND_ECCINFO(&tc58cxgxsx_ooblayout,
++				     tc58cxgxsx_ecc_get_status)),
+ };
+ 
+ static int toshiba_spinand_detect(struct spinand_device *spinand)
diff --git a/target/linux/generic/backport-5.4/456-v5.1-mtd-spinand-Add-support-for-GigaDevice-GD5F1GQ4UExxG.patch b/target/linux/generic/backport-5.4/456-v5.1-mtd-spinand-Add-support-for-GigaDevice-GD5F1GQ4UExxG.patch
new file mode 100644
index 0000000000..8e48debf43
--- /dev/null
+++ b/target/linux/generic/backport-5.4/456-v5.1-mtd-spinand-Add-support-for-GigaDevice-GD5F1GQ4UExxG.patch
@@ -0,0 +1,129 @@
+From c40c7a990a46e5102a1cc4190557bf315d32d80d Mon Sep 17 00:00:00 2001
+From: Stefan Roese <sr@denx.de>
+Date: Thu, 24 Jan 2019 13:48:06 +0100
+Subject: [PATCH 8/8] mtd: spinand: Add support for GigaDevice GD5F1GQ4UExxG
+
+Add support for GigaDevice GD5F1GQ4UExxG SPI NAND chip.
+
+Signed-off-by: Stefan Roese <sr@denx.de>
+Cc: Chuanhong Guo <gch981213@gmail.com>
+Cc: Frieder Schrempf <frieder.schrempf@kontron.de>
+Cc: Miquel Raynal <miquel.raynal@bootlin.com>
+Cc: Boris Brezillon <bbrezillon@kernel.org>
+Reviewed-by: Boris Brezillon <bbrezillon@kernel.org>
+Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
+---
+ drivers/mtd/nand/spi/gigadevice.c | 83 +++++++++++++++++++++++++++++++
+ 1 file changed, 83 insertions(+)
+
+--- a/drivers/mtd/nand/spi/gigadevice.c
++++ b/drivers/mtd/nand/spi/gigadevice.c
+@@ -12,6 +12,8 @@
+ #define GD5FXGQ4XA_STATUS_ECC_1_7_BITFLIPS	(1 << 4)
+ #define GD5FXGQ4XA_STATUS_ECC_8_BITFLIPS	(3 << 4)
+ 
++#define GD5FXGQ4UEXXG_REG_STATUS2		0xf0
++
+ static SPINAND_OP_VARIANTS(read_cache_variants,
+ 		SPINAND_PAGE_READ_FROM_CACHE_QUADIO_OP(0, 2, NULL, 0),
+ 		SPINAND_PAGE_READ_FROM_CACHE_X4_OP(0, 1, NULL, 0),
+@@ -81,11 +83,83 @@ static int gd5fxgq4xa_ecc_get_status(str
+ 	return -EINVAL;
+ }
+ 
++static int gd5fxgq4uexxg_ooblayout_ecc(struct mtd_info *mtd, int section,
++				       struct mtd_oob_region *region)
++{
++	if (section)
++		return -ERANGE;
++
++	region->offset = 64;
++	region->length = 64;
++
++	return 0;
++}
++
++static int gd5fxgq4uexxg_ooblayout_free(struct mtd_info *mtd, int section,
++					struct mtd_oob_region *region)
++{
++	if (section)
++		return -ERANGE;
++
++	/* Reserve 1 bytes for the BBM. */
++	region->offset = 1;
++	region->length = 63;
++
++	return 0;
++}
++
++static int gd5fxgq4uexxg_ecc_get_status(struct spinand_device *spinand,
++					u8 status)
++{
++	u8 status2;
++	struct spi_mem_op op = SPINAND_GET_FEATURE_OP(GD5FXGQ4UEXXG_REG_STATUS2,
++						      &status2);
++	int ret;
++
++	switch (status & STATUS_ECC_MASK) {
++	case STATUS_ECC_NO_BITFLIPS:
++		return 0;
++
++	case GD5FXGQ4XA_STATUS_ECC_1_7_BITFLIPS:
++		/*
++		 * Read status2 register to determine a more fine grained
++		 * bit error status
++		 */
++		ret = spi_mem_exec_op(spinand->spimem, &op);
++		if (ret)
++			return ret;
++
++		/*
++		 * 4 ... 7 bits are flipped (1..4 can't be detected, so
++		 * report the maximum of 4 in this case
++		 */
++		/* bits sorted this way (3...0): ECCS1,ECCS0,ECCSE1,ECCSE0 */
++		return ((status & STATUS_ECC_MASK) >> 2) |
++			((status2 & STATUS_ECC_MASK) >> 4);
++
++	case GD5FXGQ4XA_STATUS_ECC_8_BITFLIPS:
++		return 8;
++
++	case STATUS_ECC_UNCOR_ERROR:
++		return -EBADMSG;
++
++	default:
++		break;
++	}
++
++	return -EINVAL;
++}
++
+ static const struct mtd_ooblayout_ops gd5fxgq4xa_ooblayout = {
+ 	.ecc = gd5fxgq4xa_ooblayout_ecc,
+ 	.free = gd5fxgq4xa_ooblayout_free,
+ };
+ 
++static const struct mtd_ooblayout_ops gd5fxgq4uexxg_ooblayout = {
++	.ecc = gd5fxgq4uexxg_ooblayout_ecc,
++	.free = gd5fxgq4uexxg_ooblayout_free,
++};
++
+ static const struct spinand_info gigadevice_spinand_table[] = {
+ 	SPINAND_INFO("GD5F1GQ4xA", 0xF1,
+ 		     NAND_MEMORG(1, 2048, 64, 64, 1024, 1, 1, 1),
+@@ -114,6 +188,15 @@ static const struct spinand_info gigadev
+ 		     0,
+ 		     SPINAND_ECCINFO(&gd5fxgq4xa_ooblayout,
+ 				     gd5fxgq4xa_ecc_get_status)),
++	SPINAND_INFO("GD5F1GQ4UExxG", 0xd1,
++		     NAND_MEMORG(1, 2048, 128, 64, 1024, 1, 1, 1),
++		     NAND_ECCREQ(8, 512),
++		     SPINAND_INFO_OP_VARIANTS(&read_cache_variants,
++					      &write_cache_variants,
++					      &update_cache_variants),
++		     0,
++		     SPINAND_ECCINFO(&gd5fxgq4uexxg_ooblayout,
++				     gd5fxgq4uexxg_ecc_get_status)),
+ };
+ 
+ static int gigadevice_spinand_detect(struct spinand_device *spinand)
diff --git a/target/linux/generic/backport-5.4/460-v5.0-mtd-spi-nor-Add-support-for-mx25u12835f.patch b/target/linux/generic/backport-5.4/460-v5.0-mtd-spi-nor-Add-support-for-mx25u12835f.patch
new file mode 100644
index 0000000000..1bdf35b987
--- /dev/null
+++ b/target/linux/generic/backport-5.4/460-v5.0-mtd-spi-nor-Add-support-for-mx25u12835f.patch
@@ -0,0 +1,25 @@
+From 81554171373018b83f3554b9e725d2b5bf1844a5 Mon Sep 17 00:00:00 2001
+From: Alexander Sverdlin <alexander.sverdlin@nokia.com>
+Date: Fri, 13 Jul 2018 15:06:46 +0200
+Subject: [PATCH] mtd: spi-nor: Add support for mx25u12835f
+
+This chip supports dual and quad read and uniform 4K-byte erase.
+
+Signed-off-by: Alexander Sverdlin <alexander.sverdlin@nokia.com>
+Reviewed-by: Tudor Ambarus <tudor.ambarus@microchip.com>
+Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com>
+---
+ drivers/mtd/spi-nor/spi-nor.c | 2 ++
+ 1 file changed, 2 insertions(+)
+
+--- a/drivers/mtd/spi-nor/spi-nor.c
++++ b/drivers/mtd/spi-nor/spi-nor.c
+@@ -1088,6 +1088,8 @@ static const struct flash_info spi_nor_i
+ 	{ "mx25u6435f",  INFO(0xc22537, 0, 64 * 1024, 128, SECT_4K) },
+ 	{ "mx25l12805d", INFO(0xc22018, 0, 64 * 1024, 256, 0) },
+ 	{ "mx25l12855e", INFO(0xc22618, 0, 64 * 1024, 256, 0) },
++	{ "mx25u12835f", INFO(0xc22538, 0, 64 * 1024, 256,
++			 SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ) },
+ 	{ "mx25l25635e", INFO(0xc22019, 0, 64 * 1024, 512, SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ) },
+ 	{ "mx25u25635f", INFO(0xc22539, 0, 64 * 1024, 512, SECT_4K | SPI_NOR_4B_OPCODES) },
+ 	{ "mx25l25655e", INFO(0xc22619, 0, 64 * 1024, 512, 0) },
diff --git a/target/linux/generic/backport-5.4/460-v5.3-mtd-spinand-Define-macros-for-page-read-ops-with-thr.patch b/target/linux/generic/backport-5.4/460-v5.3-mtd-spinand-Define-macros-for-page-read-ops-with-thr.patch
new file mode 100644
index 0000000000..c28ae1d797
--- /dev/null
+++ b/target/linux/generic/backport-5.4/460-v5.3-mtd-spinand-Define-macros-for-page-read-ops-with-thr.patch
@@ -0,0 +1,81 @@
+From d014717d50b1efd011a3a028ce92563a4dc9bae5 Mon Sep 17 00:00:00 2001
+From: Jeff Kletsky <git-commits@allycomm.com>
+Date: Wed, 22 May 2019 15:05:53 -0700
+Subject: [PATCH 1/3] mtd: spinand: Define macros for page-read ops with
+ three-byte addresses
+
+The GigaDevice GD5F1GQ4UFxxG SPI NAND utilizes three-byte addresses
+for its page-read ops.
+
+http://www.gigadevice.com/datasheet/gd5f1gq4xfxxg/
+
+Signed-off-by: Jeff Kletsky <git-commits@allycomm.com>
+Reviewed-by: Frieder Schrempf <frieder.schrempf@kontron.de>
+Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
+---
+ include/linux/mtd/spinand.h | 30 ++++++++++++++++++++++++++++++
+ 1 file changed, 30 insertions(+)
+
+--- a/include/linux/mtd/spinand.h
++++ b/include/linux/mtd/spinand.h
+@@ -68,30 +68,60 @@
+ 		   SPI_MEM_OP_DUMMY(ndummy, 1),				\
+ 		   SPI_MEM_OP_DATA_IN(len, buf, 1))
+ 
++#define SPINAND_PAGE_READ_FROM_CACHE_OP_3A(fast, addr, ndummy, buf, len) \
++	SPI_MEM_OP(SPI_MEM_OP_CMD(fast ? 0x0b : 0x03, 1),		\
++		   SPI_MEM_OP_ADDR(3, addr, 1),				\
++		   SPI_MEM_OP_DUMMY(ndummy, 1),				\
++		   SPI_MEM_OP_DATA_IN(len, buf, 1))
++
+ #define SPINAND_PAGE_READ_FROM_CACHE_X2_OP(addr, ndummy, buf, len)	\
+ 	SPI_MEM_OP(SPI_MEM_OP_CMD(0x3b, 1),				\
+ 		   SPI_MEM_OP_ADDR(2, addr, 1),				\
+ 		   SPI_MEM_OP_DUMMY(ndummy, 1),				\
+ 		   SPI_MEM_OP_DATA_IN(len, buf, 2))
+ 
++#define SPINAND_PAGE_READ_FROM_CACHE_X2_OP_3A(addr, ndummy, buf, len)	\
++	SPI_MEM_OP(SPI_MEM_OP_CMD(0x3b, 1),				\
++		   SPI_MEM_OP_ADDR(3, addr, 1),				\
++		   SPI_MEM_OP_DUMMY(ndummy, 1),				\
++		   SPI_MEM_OP_DATA_IN(len, buf, 2))
++
+ #define SPINAND_PAGE_READ_FROM_CACHE_X4_OP(addr, ndummy, buf, len)	\
+ 	SPI_MEM_OP(SPI_MEM_OP_CMD(0x6b, 1),				\
+ 		   SPI_MEM_OP_ADDR(2, addr, 1),				\
+ 		   SPI_MEM_OP_DUMMY(ndummy, 1),				\
+ 		   SPI_MEM_OP_DATA_IN(len, buf, 4))
+ 
++#define SPINAND_PAGE_READ_FROM_CACHE_X4_OP_3A(addr, ndummy, buf, len)	\
++	SPI_MEM_OP(SPI_MEM_OP_CMD(0x6b, 1),				\
++		   SPI_MEM_OP_ADDR(3, addr, 1),				\
++		   SPI_MEM_OP_DUMMY(ndummy, 1),				\
++		   SPI_MEM_OP_DATA_IN(len, buf, 4))
++
+ #define SPINAND_PAGE_READ_FROM_CACHE_DUALIO_OP(addr, ndummy, buf, len)	\
+ 	SPI_MEM_OP(SPI_MEM_OP_CMD(0xbb, 1),				\
+ 		   SPI_MEM_OP_ADDR(2, addr, 2),				\
+ 		   SPI_MEM_OP_DUMMY(ndummy, 2),				\
+ 		   SPI_MEM_OP_DATA_IN(len, buf, 2))
+ 
++#define SPINAND_PAGE_READ_FROM_CACHE_DUALIO_OP_3A(addr, ndummy, buf, len) \
++	SPI_MEM_OP(SPI_MEM_OP_CMD(0xbb, 1),				\
++		   SPI_MEM_OP_ADDR(3, addr, 2),				\
++		   SPI_MEM_OP_DUMMY(ndummy, 2),				\
++		   SPI_MEM_OP_DATA_IN(len, buf, 2))
++
+ #define SPINAND_PAGE_READ_FROM_CACHE_QUADIO_OP(addr, ndummy, buf, len)	\
+ 	SPI_MEM_OP(SPI_MEM_OP_CMD(0xeb, 1),				\
+ 		   SPI_MEM_OP_ADDR(2, addr, 4),				\
+ 		   SPI_MEM_OP_DUMMY(ndummy, 4),				\
+ 		   SPI_MEM_OP_DATA_IN(len, buf, 4))
+ 
++#define SPINAND_PAGE_READ_FROM_CACHE_QUADIO_OP_3A(addr, ndummy, buf, len) \
++	SPI_MEM_OP(SPI_MEM_OP_CMD(0xeb, 1),				\
++		   SPI_MEM_OP_ADDR(3, addr, 4),				\
++		   SPI_MEM_OP_DUMMY(ndummy, 4),				\
++		   SPI_MEM_OP_DATA_IN(len, buf, 4))
++
+ #define SPINAND_PROG_EXEC_OP(addr)					\
+ 	SPI_MEM_OP(SPI_MEM_OP_CMD(0x10, 1),				\
+ 		   SPI_MEM_OP_ADDR(3, addr, 1),				\
diff --git a/target/linux/generic/backport-5.4/461-v5.3-mtd-spinand-Add-support-for-two-byte-device-IDs.patch b/target/linux/generic/backport-5.4/461-v5.3-mtd-spinand-Add-support-for-two-byte-device-IDs.patch
new file mode 100644
index 0000000000..fcbecbb762
--- /dev/null
+++ b/target/linux/generic/backport-5.4/461-v5.3-mtd-spinand-Add-support-for-two-byte-device-IDs.patch
@@ -0,0 +1,48 @@
+From 53dd94a79d3bfdaae30e5a4ebf474ea1af1d572e Mon Sep 17 00:00:00 2001
+From: Jeff Kletsky <git-commits@allycomm.com>
+Date: Wed, 22 May 2019 15:05:54 -0700
+Subject: [PATCH 2/3] mtd: spinand: Add support for two-byte device IDs
+
+The GigaDevice GD5F1GQ4UFxxG SPI NAND utilizes two-byte device IDs.
+
+http://www.gigadevice.com/datasheet/gd5f1gq4xfxxg/
+
+Signed-off-by: Jeff Kletsky <git-commits@allycomm.com>
+Reviewed-by: Frieder Schrempf <frieder.schrempf@kontron.de>
+Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
+---
+ drivers/mtd/nand/spi/core.c | 2 +-
+ include/linux/mtd/spinand.h | 4 ++--
+ 2 files changed, 3 insertions(+), 3 deletions(-)
+
+--- a/drivers/mtd/nand/spi/core.c
++++ b/drivers/mtd/nand/spi/core.c
+@@ -853,7 +853,7 @@ spinand_select_op_variant(struct spinand
+  */
+ int spinand_match_and_init(struct spinand_device *spinand,
+ 			   const struct spinand_info *table,
+-			   unsigned int table_size, u8 devid)
++			   unsigned int table_size, u16 devid)
+ {
+ 	struct nand_device *nand = spinand_to_nand(spinand);
+ 	unsigned int i;
+--- a/include/linux/mtd/spinand.h
++++ b/include/linux/mtd/spinand.h
+@@ -290,7 +290,7 @@ struct spinand_ecc_info {
+  */
+ struct spinand_info {
+ 	const char *model;
+-	u8 devid;
++	u16 devid;
+ 	u32 flags;
+ 	struct nand_memory_organization memorg;
+ 	struct nand_ecc_req eccreq;
+@@ -445,7 +445,7 @@ static inline void spinand_set_of_node(s
+ 
+ int spinand_match_and_init(struct spinand_device *dev,
+ 			   const struct spinand_info *table,
+-			   unsigned int table_size, u8 devid);
++			   unsigned int table_size, u16 devid);
+ 
+ int spinand_upd_cfg(struct spinand_device *spinand, u8 mask, u8 val);
+ int spinand_select_target(struct spinand_device *spinand, unsigned int target);
diff --git a/target/linux/generic/backport-5.4/462-v5.3-mtd-spinand-Add-support-for-GigaDevice-GD5F1GQ4UFxxG.patch b/target/linux/generic/backport-5.4/462-v5.3-mtd-spinand-Add-support-for-GigaDevice-GD5F1GQ4UFxxG.patch
new file mode 100644
index 0000000000..06d87ba5e0
--- /dev/null
+++ b/target/linux/generic/backport-5.4/462-v5.3-mtd-spinand-Add-support-for-GigaDevice-GD5F1GQ4UFxxG.patch
@@ -0,0 +1,197 @@
+
+IMPORTANT NOTE
+==============
+
+The content of this patch has been adapted for Linux 4.19
+
+Changes were made in Linux 5.x to add the bad-block limit
+to the metadata available to the driver, adding a parameter
+
+NAND_MEMORG(1, 2048, 128, 64, 1024, 20, 1, 1, 1),
+                                     ^- New bad-block limit
+
+This patch omits that parameter from the upstream patch
+for compatibility with the Linux 4.19 driver.
+
+=====
+
+From 049df13c4e63884fe6634db5568e08f65922256e Mon Sep 17 00:00:00 2001
+From: Jeff Kletsky <git-commits@allycomm.com>
+Date: Wed, 22 May 2019 15:05:55 -0700
+Subject: [PATCH 3/3] mtd: spinand: Add support for GigaDevice GD5F1GQ4UFxxG
+
+The GigaDevice GD5F1GQ4UFxxG SPI NAND is in current production devices
+and, while it has the same logical layout as the E-series devices,
+it differs in the SPI interfacing in significant ways.
+
+This support is contingent on previous commits to:
+
+  * Add support for two-byte device IDs
+  * Define macros for page-read ops with three-byte addresses
+
+http://www.gigadevice.com/datasheet/gd5f1gq4xfxxg/
+
+Signed-off-by: Jeff Kletsky <git-commits@allycomm.com>
+Reviewed-by: Frieder Schrempf <frieder.schrempf@kontron.de>
+Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
+---
+ drivers/mtd/nand/spi/gigadevice.c | 79 +++++++++++++++++++++++++------
+ 1 file changed, 64 insertions(+), 15 deletions(-)
+
+--- a/drivers/mtd/nand/spi/gigadevice.c
++++ b/drivers/mtd/nand/spi/gigadevice.c
+@@ -9,11 +9,17 @@
+ #include <linux/mtd/spinand.h>
+ 
+ #define SPINAND_MFR_GIGADEVICE			0xC8
++
+ #define GD5FXGQ4XA_STATUS_ECC_1_7_BITFLIPS	(1 << 4)
+ #define GD5FXGQ4XA_STATUS_ECC_8_BITFLIPS	(3 << 4)
+ 
+ #define GD5FXGQ4UEXXG_REG_STATUS2		0xf0
+ 
++#define GD5FXGQ4UXFXXG_STATUS_ECC_MASK		(7 << 4)
++#define GD5FXGQ4UXFXXG_STATUS_ECC_NO_BITFLIPS	(0 << 4)
++#define GD5FXGQ4UXFXXG_STATUS_ECC_1_3_BITFLIPS	(1 << 4)
++#define GD5FXGQ4UXFXXG_STATUS_ECC_UNCOR_ERROR	(7 << 4)
++
+ static SPINAND_OP_VARIANTS(read_cache_variants,
+ 		SPINAND_PAGE_READ_FROM_CACHE_QUADIO_OP(0, 2, NULL, 0),
+ 		SPINAND_PAGE_READ_FROM_CACHE_X4_OP(0, 1, NULL, 0),
+@@ -22,6 +28,14 @@ static SPINAND_OP_VARIANTS(read_cache_va
+ 		SPINAND_PAGE_READ_FROM_CACHE_OP(true, 0, 1, NULL, 0),
+ 		SPINAND_PAGE_READ_FROM_CACHE_OP(false, 0, 1, NULL, 0));
+ 
++static SPINAND_OP_VARIANTS(read_cache_variants_f,
++		SPINAND_PAGE_READ_FROM_CACHE_QUADIO_OP(0, 2, NULL, 0),
++		SPINAND_PAGE_READ_FROM_CACHE_X4_OP_3A(0, 1, NULL, 0),
++		SPINAND_PAGE_READ_FROM_CACHE_DUALIO_OP(0, 1, NULL, 0),
++		SPINAND_PAGE_READ_FROM_CACHE_X2_OP_3A(0, 1, NULL, 0),
++		SPINAND_PAGE_READ_FROM_CACHE_OP_3A(true, 0, 1, NULL, 0),
++		SPINAND_PAGE_READ_FROM_CACHE_OP_3A(false, 0, 0, NULL, 0));
++
+ static SPINAND_OP_VARIANTS(write_cache_variants,
+ 		SPINAND_PROG_LOAD_X4(true, 0, NULL, 0),
+ 		SPINAND_PROG_LOAD(true, 0, NULL, 0));
+@@ -59,6 +73,11 @@ static int gd5fxgq4xa_ooblayout_free(str
+ 	return 0;
+ }
+ 
++static const struct mtd_ooblayout_ops gd5fxgq4xa_ooblayout = {
++	.ecc = gd5fxgq4xa_ooblayout_ecc,
++	.free = gd5fxgq4xa_ooblayout_free,
++};
++
+ static int gd5fxgq4xa_ecc_get_status(struct spinand_device *spinand,
+ 					 u8 status)
+ {
+@@ -83,7 +102,7 @@ static int gd5fxgq4xa_ecc_get_status(str
+ 	return -EINVAL;
+ }
+ 
+-static int gd5fxgq4uexxg_ooblayout_ecc(struct mtd_info *mtd, int section,
++static int gd5fxgq4_variant2_ooblayout_ecc(struct mtd_info *mtd, int section,
+ 				       struct mtd_oob_region *region)
+ {
+ 	if (section)
+@@ -95,7 +114,7 @@ static int gd5fxgq4uexxg_ooblayout_ecc(s
+ 	return 0;
+ }
+ 
+-static int gd5fxgq4uexxg_ooblayout_free(struct mtd_info *mtd, int section,
++static int gd5fxgq4_variant2_ooblayout_free(struct mtd_info *mtd, int section,
+ 					struct mtd_oob_region *region)
+ {
+ 	if (section)
+@@ -108,6 +127,11 @@ static int gd5fxgq4uexxg_ooblayout_free(
+ 	return 0;
+ }
+ 
++static const struct mtd_ooblayout_ops gd5fxgq4_variant2_ooblayout = {
++	.ecc = gd5fxgq4_variant2_ooblayout_ecc,
++	.free = gd5fxgq4_variant2_ooblayout_free,
++};
++
+ static int gd5fxgq4uexxg_ecc_get_status(struct spinand_device *spinand,
+ 					u8 status)
+ {
+@@ -150,15 +174,25 @@ static int gd5fxgq4uexxg_ecc_get_status(
+ 	return -EINVAL;
+ }
+ 
+-static const struct mtd_ooblayout_ops gd5fxgq4xa_ooblayout = {
+-	.ecc = gd5fxgq4xa_ooblayout_ecc,
+-	.free = gd5fxgq4xa_ooblayout_free,
+-};
++static int gd5fxgq4ufxxg_ecc_get_status(struct spinand_device *spinand,
++					u8 status)
++{
++	switch (status & GD5FXGQ4UXFXXG_STATUS_ECC_MASK) {
++	case GD5FXGQ4UXFXXG_STATUS_ECC_NO_BITFLIPS:
++		return 0;
+ 
+-static const struct mtd_ooblayout_ops gd5fxgq4uexxg_ooblayout = {
+-	.ecc = gd5fxgq4uexxg_ooblayout_ecc,
+-	.free = gd5fxgq4uexxg_ooblayout_free,
+-};
++	case GD5FXGQ4UXFXXG_STATUS_ECC_1_3_BITFLIPS:
++		return 3;
++
++	case GD5FXGQ4UXFXXG_STATUS_ECC_UNCOR_ERROR:
++		return -EBADMSG;
++
++	default: /* (2 << 4) through (6 << 4) are 4-8 corrected errors */
++		return ((status & GD5FXGQ4UXFXXG_STATUS_ECC_MASK) >> 4) + 2;
++	}
++
++	return -EINVAL;
++}
+ 
+ static const struct spinand_info gigadevice_spinand_table[] = {
+ 	SPINAND_INFO("GD5F1GQ4xA", 0xF1,
+@@ -195,25 +229,40 @@ static const struct spinand_info gigadev
+ 					      &write_cache_variants,
+ 					      &update_cache_variants),
+ 		     0,
+-		     SPINAND_ECCINFO(&gd5fxgq4uexxg_ooblayout,
++		     SPINAND_ECCINFO(&gd5fxgq4_variant2_ooblayout,
+ 				     gd5fxgq4uexxg_ecc_get_status)),
++	SPINAND_INFO("GD5F1GQ4UFxxG", 0xb148,
++		     NAND_MEMORG(1, 2048, 128, 64, 1024, 1, 1, 1),
++		     NAND_ECCREQ(8, 512),
++		     SPINAND_INFO_OP_VARIANTS(&read_cache_variants_f,
++					      &write_cache_variants,
++					      &update_cache_variants),
++		     0,
++		     SPINAND_ECCINFO(&gd5fxgq4_variant2_ooblayout,
++				     gd5fxgq4ufxxg_ecc_get_status)),
+ };
+ 
+ static int gigadevice_spinand_detect(struct spinand_device *spinand)
+ {
+ 	u8 *id = spinand->id.data;
++	u16 did;
+ 	int ret;
+ 
+ 	/*
+-	 * For GD NANDs, There is an address byte needed to shift in before IDs
+-	 * are read out, so the first byte in raw_id is dummy.
++	 * Earlier GDF5-series devices (A,E) return [0][MID][DID]
++	 * Later (F) devices return [MID][DID1][DID2]
+ 	 */
+-	if (id[1] != SPINAND_MFR_GIGADEVICE)
++
++	if (id[0] == SPINAND_MFR_GIGADEVICE)
++		did = (id[1] << 8) + id[2];
++	else if (id[0] == 0 && id[1] == SPINAND_MFR_GIGADEVICE)
++		did = id[2];
++	else
+ 		return 0;
+ 
+ 	ret = spinand_match_and_init(spinand, gigadevice_spinand_table,
+ 				     ARRAY_SIZE(gigadevice_spinand_table),
+-				     id[2]);
++				     did);
+ 	if (ret)
+ 		return ret;
+ 
diff --git a/target/linux/generic/backport-5.4/463-v5.3-mtd-spinand-Add-initial-support-for-Paragon-PN26G0xA.patch b/target/linux/generic/backport-5.4/463-v5.3-mtd-spinand-Add-initial-support-for-Paragon-PN26G0xA.patch
new file mode 100644
index 0000000000..17b8e779bc
--- /dev/null
+++ b/target/linux/generic/backport-5.4/463-v5.3-mtd-spinand-Add-initial-support-for-Paragon-PN26G0xA.patch
@@ -0,0 +1,203 @@
+From 3552691616c940a7c4125c2678ba816653cd725e Mon Sep 17 00:00:00 2001
+From: Jeff Kletsky <git-commits@allycomm.com>
+Date: Tue, 18 Jun 2019 10:08:05 -0700
+Subject: [PATCH] mtd: spinand: Add initial support for Paragon PN26G0xA
+
+Add initial support for Paragon Technology
+PN26G01Axxxxx and PN26G02Axxxxx SPI NAND
+
+Datasheets available at
+http://www.xtxtech.com/upfile/2016082517274590.pdf
+http://www.xtxtech.com/upfile/2016082517282329.pdf
+
+Signed-off-by: Jeff Kletsky <git-commits@allycomm.com>
+Reviewed-by: Frieder Schrempf <frieder.schrempf@kontron.de>
+Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
+
+ADOPTED FROM UPSTREAM	due to upstream commit 377e517b5fa5 in Linux 5.2
+			which added another parameter to NAND_MEMORG
+---
+ drivers/mtd/nand/spi/Makefile  |   2 +-
+ drivers/mtd/nand/spi/core.c    |   1 +
+ drivers/mtd/nand/spi/paragon.c | 147 +++++++++++++++++++++++++++++++++
+ include/linux/mtd/spinand.h    |   1 +
+ 4 files changed, 150 insertions(+), 1 deletion(-)
+ create mode 100644 drivers/mtd/nand/spi/paragon.c
+
+--- a/drivers/mtd/nand/spi/Makefile
++++ b/drivers/mtd/nand/spi/Makefile
+@@ -1,3 +1,3 @@
+ # SPDX-License-Identifier: GPL-2.0
+-spinand-objs := core.o gigadevice.o macronix.o micron.o toshiba.o winbond.o
++spinand-objs := core.o gigadevice.o macronix.o micron.o paragon.o toshiba.o winbond.o
+ obj-$(CONFIG_MTD_SPI_NAND) += spinand.o
+--- a/drivers/mtd/nand/spi/core.c
++++ b/drivers/mtd/nand/spi/core.c
+@@ -765,6 +765,7 @@ static const struct spinand_manufacturer
+ 	&gigadevice_spinand_manufacturer,
+ 	&macronix_spinand_manufacturer,
+ 	&micron_spinand_manufacturer,
++	&paragon_spinand_manufacturer,
+ 	&toshiba_spinand_manufacturer,
+ 	&winbond_spinand_manufacturer,
+ };
+--- /dev/null
++++ b/drivers/mtd/nand/spi/paragon.c
+@@ -0,0 +1,147 @@
++// SPDX-License-Identifier: GPL-2.0
++/*
++ * Copyright (C) 2019 Jeff Kletsky
++ *
++ * Author: Jeff Kletsky <git-commits@allycomm.com>
++ */
++
++#include <linux/device.h>
++#include <linux/kernel.h>
++#include <linux/mtd/spinand.h>
++
++
++#define SPINAND_MFR_PARAGON	0xa1
++
++
++#define PN26G0XA_STATUS_ECC_BITMASK		(3 << 4)
++
++#define PN26G0XA_STATUS_ECC_NONE_DETECTED	(0 << 4)
++#define PN26G0XA_STATUS_ECC_1_7_CORRECTED	(1 << 4)
++#define PN26G0XA_STATUS_ECC_ERRORED		(2 << 4)
++#define PN26G0XA_STATUS_ECC_8_CORRECTED		(3 << 4)
++
++
++static SPINAND_OP_VARIANTS(read_cache_variants,
++		SPINAND_PAGE_READ_FROM_CACHE_QUADIO_OP(0, 2, NULL, 0),
++		SPINAND_PAGE_READ_FROM_CACHE_X4_OP(0, 1, NULL, 0),
++		SPINAND_PAGE_READ_FROM_CACHE_DUALIO_OP(0, 1, NULL, 0),
++		SPINAND_PAGE_READ_FROM_CACHE_X2_OP(0, 1, NULL, 0),
++		SPINAND_PAGE_READ_FROM_CACHE_OP(true, 0, 1, NULL, 0),
++		SPINAND_PAGE_READ_FROM_CACHE_OP(false, 0, 1, NULL, 0));
++
++static SPINAND_OP_VARIANTS(write_cache_variants,
++		SPINAND_PROG_LOAD_X4(true, 0, NULL, 0),
++		SPINAND_PROG_LOAD(true, 0, NULL, 0));
++
++static SPINAND_OP_VARIANTS(update_cache_variants,
++		SPINAND_PROG_LOAD_X4(false, 0, NULL, 0),
++		SPINAND_PROG_LOAD(false, 0, NULL, 0));
++
++
++static int pn26g0xa_ooblayout_ecc(struct mtd_info *mtd, int section,
++				   struct mtd_oob_region *region)
++{
++	if (section > 3)
++		return -ERANGE;
++
++	region->offset = 6 + (15 * section); /* 4 BBM + 2 user bytes */
++	region->length = 13;
++
++	return 0;
++}
++
++static int pn26g0xa_ooblayout_free(struct mtd_info *mtd, int section,
++				   struct mtd_oob_region *region)
++{
++	if (section > 4)
++		return -ERANGE;
++
++	if (section == 4) {
++		region->offset = 64;
++		region->length = 64;
++	} else {
++		region->offset = 4 + (15 * section);
++		region->length = 2;
++	}
++
++	return 0;
++}
++
++static int pn26g0xa_ecc_get_status(struct spinand_device *spinand,
++				   u8 status)
++{
++	switch (status & PN26G0XA_STATUS_ECC_BITMASK) {
++	case PN26G0XA_STATUS_ECC_NONE_DETECTED:
++		return 0;
++
++	case PN26G0XA_STATUS_ECC_1_7_CORRECTED:
++		return 7;	/* Return upper limit by convention */
++
++	case PN26G0XA_STATUS_ECC_8_CORRECTED:
++		return 8;
++
++	case PN26G0XA_STATUS_ECC_ERRORED:
++		return -EBADMSG;
++
++	default:
++		break;
++	}
++
++	return -EINVAL;
++}
++
++static const struct mtd_ooblayout_ops pn26g0xa_ooblayout = {
++	.ecc = pn26g0xa_ooblayout_ecc,
++	.free = pn26g0xa_ooblayout_free,
++};
++
++
++static const struct spinand_info paragon_spinand_table[] = {
++	SPINAND_INFO("PN26G01A", 0xe1,
++		     NAND_MEMORG(1, 2048, 128, 64, 1024, 1, 1, 1),
++		     NAND_ECCREQ(8, 512),
++		     SPINAND_INFO_OP_VARIANTS(&read_cache_variants,
++					      &write_cache_variants,
++					      &update_cache_variants),
++		     0,
++		     SPINAND_ECCINFO(&pn26g0xa_ooblayout,
++				     pn26g0xa_ecc_get_status)),
++	SPINAND_INFO("PN26G02A", 0xe2,
++		     NAND_MEMORG(1, 2048, 128, 64, 2048, 1, 1, 1),
++		     NAND_ECCREQ(8, 512),
++		     SPINAND_INFO_OP_VARIANTS(&read_cache_variants,
++					      &write_cache_variants,
++					      &update_cache_variants),
++		     0,
++		     SPINAND_ECCINFO(&pn26g0xa_ooblayout,
++				     pn26g0xa_ecc_get_status)),
++};
++
++static int paragon_spinand_detect(struct spinand_device *spinand)
++{
++	u8 *id = spinand->id.data;
++	int ret;
++
++	/* Read ID returns [0][MID][DID] */
++
++	if (id[1] != SPINAND_MFR_PARAGON)
++		return 0;
++
++	ret = spinand_match_and_init(spinand, paragon_spinand_table,
++				     ARRAY_SIZE(paragon_spinand_table),
++				     id[2]);
++	if (ret)
++		return ret;
++
++	return 1;
++}
++
++static const struct spinand_manufacturer_ops paragon_spinand_manuf_ops = {
++	.detect = paragon_spinand_detect,
++};
++
++const struct spinand_manufacturer paragon_spinand_manufacturer = {
++	.id = SPINAND_MFR_PARAGON,
++	.name = "Paragon",
++	.ops = &paragon_spinand_manuf_ops,
++};
+--- a/include/linux/mtd/spinand.h
++++ b/include/linux/mtd/spinand.h
+@@ -227,6 +227,7 @@ struct spinand_manufacturer {
+ extern const struct spinand_manufacturer gigadevice_spinand_manufacturer;
+ extern const struct spinand_manufacturer macronix_spinand_manufacturer;
+ extern const struct spinand_manufacturer micron_spinand_manufacturer;
++extern const struct spinand_manufacturer paragon_spinand_manufacturer;
+ extern const struct spinand_manufacturer toshiba_spinand_manufacturer;
+ extern const struct spinand_manufacturer winbond_spinand_manufacturer;
+ 
diff --git a/target/linux/generic/backport-5.4/700-v5.1-net-phylink-only-call-mac_config-during-resolve-when.patch b/target/linux/generic/backport-5.4/700-v5.1-net-phylink-only-call-mac_config-during-resolve-when.patch
new file mode 100644
index 0000000000..0e272ea891
--- /dev/null
+++ b/target/linux/generic/backport-5.4/700-v5.1-net-phylink-only-call-mac_config-during-resolve-when.patch
@@ -0,0 +1,44 @@
+From 6f3ea4e5b1f0867ec217f6101fcb89783ed905d7 Mon Sep 17 00:00:00 2001
+From: Russell King <rmk+kernel@armlinux.org.uk>
+Date: Sat, 9 Feb 2019 18:23:26 +0000
+Subject: [PATCH] net: phylink: only call mac_config() during resolve
+ when link is up
+
+There's little point calling mac_config() when the link is down.
+
+Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
+---
+ drivers/net/phy/phylink.c | 11 +++++++++--
+ 1 file changed, 9 insertions(+), 2 deletions(-)
+
+--- a/drivers/net/phy/phylink.c
++++ b/drivers/net/phy/phylink.c
+@@ -339,6 +339,13 @@ static void phylink_mac_config(struct ph
+ 	pl->ops->mac_config(pl->netdev, pl->link_an_mode, state);
+ }
+ 
++static void phylink_mac_config_up(struct phylink *pl,
++				  const struct phylink_link_state *state)
++{
++	if (state->link)
++		phylink_mac_config(pl, state);
++}
++
+ static void phylink_mac_an_restart(struct phylink *pl)
+ {
+ 	if (pl->link_config.an_enabled &&
+@@ -442,12 +449,12 @@ static void phylink_resolve(struct work_
+ 		case MLO_AN_PHY:
+ 			link_state = pl->phy_state;
+ 			phylink_resolve_flow(pl, &link_state);
+-			phylink_mac_config(pl, &link_state);
++			phylink_mac_config_up(pl, &link_state);
+ 			break;
+ 
+ 		case MLO_AN_FIXED:
+ 			phylink_get_fixed_state(pl, &link_state);
+-			phylink_mac_config(pl, &link_state);
++			phylink_mac_config_up(pl, &link_state);
+ 			break;
+ 
+ 		case MLO_AN_INBAND:
diff --git a/target/linux/generic/backport-5.4/701-v5.2-net-phylink-ensure-inband-AN-works-correctly.patch b/target/linux/generic/backport-5.4/701-v5.2-net-phylink-ensure-inband-AN-works-correctly.patch
new file mode 100644
index 0000000000..746aca2e5a
--- /dev/null
+++ b/target/linux/generic/backport-5.4/701-v5.2-net-phylink-ensure-inband-AN-works-correctly.patch
@@ -0,0 +1,59 @@
+From 72f973f292b3eaaf451ebcd3253900d41f4ef24a Mon Sep 17 00:00:00 2001
+From: Russell King <rmk+kernel@armlinux.org.uk>
+Date: Fri, 25 Jan 2019 17:42:51 +0000
+Subject: [PATCH] net: phylink: ensure inband AN works correctly
+
+Do not update the link interface mode while the link is down to avoid
+spurious link interface changes.
+
+Always call mac_config if we have a PHY to propagate the pause mode
+settings to the MAC.
+
+Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
+---
+ drivers/net/phy/phylink.c | 37 +++++++++++++++----------------------
+ 1 file changed, 15 insertions(+), 22 deletions(-)
+
+--- a/drivers/net/phy/phylink.c
++++ b/drivers/net/phy/phylink.c
+@@ -459,28 +459,21 @@ static void phylink_resolve(struct work_
+ 
+ 		case MLO_AN_INBAND:
+ 			phylink_get_mac_state(pl, &link_state);
+-			if (pl->phydev) {
+-				bool changed = false;
+ 
+-				link_state.link = link_state.link &&
+-						  pl->phy_state.link;
++			/* If we have a phy, the "up" state is the union of
++			 * both the PHY and the MAC */
++			if (pl->phydev)
++				link_state.link &= pl->phy_state.link;
+ 
+-				if (pl->phy_state.interface !=
+-				    link_state.interface) {
+-					link_state.interface = pl->phy_state.interface;
+-					changed = true;
+-				}
++			/* Only update if the PHY link is up */
++			if (pl->phydev && pl->phy_state.link) {
++				link_state.interface = pl->phy_state.interface;
+ 
+-				/* Propagate the flow control from the PHY
+-				 * to the MAC. Also propagate the interface
+-				 * if changed.
+-				 */
+-				if (pl->phy_state.link || changed) {
+-					link_state.pause |= pl->phy_state.pause;
+-					phylink_resolve_flow(pl, &link_state);
+-
+-					phylink_mac_config(pl, &link_state);
+-				}
++				/* If we have a PHY, we need to update with
++				 * the pause mode bits. */
++				link_state.pause |= pl->phy_state.pause;
++				phylink_resolve_flow(pl, &link_state);
++				phylink_mac_config(pl, &link_state);
+ 			}
+ 			break;
+ 		}
diff --git a/target/linux/generic/backport-5.4/702-v4.20-net-ethernet-Add-helper-for-MACs-which-support-asym-.patch b/target/linux/generic/backport-5.4/702-v4.20-net-ethernet-Add-helper-for-MACs-which-support-asym-.patch
new file mode 100644
index 0000000000..3ada51636b
--- /dev/null
+++ b/target/linux/generic/backport-5.4/702-v4.20-net-ethernet-Add-helper-for-MACs-which-support-asym-.patch
@@ -0,0 +1,49 @@
+From 1da223db3a0c522300b519ecbe1dc45927e28088 Mon Sep 17 00:00:00 2001
+From: Andrew Lunn <andrew@lunn.ch>
+Date: Wed, 12 Sep 2018 01:53:15 +0200
+Subject: [PATCH 600/660] net: ethernet: Add helper for MACs which support asym
+ pause
+
+Rather than have the MAC drivers manipulate phydev members to indicate
+they support Asym Pause, add a helper function.
+
+Signed-off-by: Andrew Lunn <andrew@lunn.ch>
+Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
+Signed-off-by: David S. Miller <davem@davemloft.net>
+---
+ drivers/net/phy/phy_device.c | 13 +++++++++++++
+ include/linux/phy.h          |  1 +
+ 2 files changed, 14 insertions(+)
+
+--- a/drivers/net/phy/phy_device.c
++++ b/drivers/net/phy/phy_device.c
+@@ -1777,6 +1777,19 @@ int phy_set_max_speed(struct phy_device
+ }
+ EXPORT_SYMBOL(phy_set_max_speed);
+ 
++/**
++ * phy_support_asym_pause - Enable support of asym pause
++ * @phydev: target phy_device struct
++ *
++ * Description: Called by the MAC to indicate is supports Asym Pause.
++ */
++void phy_support_asym_pause(struct phy_device *phydev)
++{
++	phydev->supported |= SUPPORTED_Pause | SUPPORTED_Asym_Pause;
++	phydev->advertising = phydev->supported;
++}
++EXPORT_SYMBOL(phy_support_asym_pause);
++
+ static void of_set_phy_supported(struct phy_device *phydev)
+ {
+ 	struct device_node *node = phydev->mdio.dev.of_node;
+--- a/include/linux/phy.h
++++ b/include/linux/phy.h
+@@ -1049,6 +1049,7 @@ int phy_mii_ioctl(struct phy_device *phy
+ int phy_start_interrupts(struct phy_device *phydev);
+ void phy_print_status(struct phy_device *phydev);
+ int phy_set_max_speed(struct phy_device *phydev, u32 max_speed);
++void phy_support_asym_pause(struct phy_device *phydev);
+ 
+ int phy_register_fixup(const char *bus_id, u32 phy_uid, u32 phy_uid_mask,
+ 		       int (*run)(struct phy_device *));
diff --git a/target/linux/generic/backport-5.4/703-v4.20-net-ethernet-Add-helper-for-set_pauseparam-for-Asym-.patch b/target/linux/generic/backport-5.4/703-v4.20-net-ethernet-Add-helper-for-set_pauseparam-for-Asym-.patch
new file mode 100644
index 0000000000..4ad3bf698a
--- /dev/null
+++ b/target/linux/generic/backport-5.4/703-v4.20-net-ethernet-Add-helper-for-set_pauseparam-for-Asym-.patch
@@ -0,0 +1,66 @@
+From ce825df56e0480a2cbb296e38976babafb57e503 Mon Sep 17 00:00:00 2001
+From: Andrew Lunn <andrew@lunn.ch>
+Date: Wed, 12 Sep 2018 01:53:17 +0200
+Subject: [PATCH 601/660] net: ethernet: Add helper for set_pauseparam for Asym
+ Pause
+
+ethtool can be used to enable/disable pause. Add a helper to configure
+the PHY when asym pause is supported.
+
+Signed-off-by: Andrew Lunn <andrew@lunn.ch>
+Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
+Signed-off-by: David S. Miller <davem@davemloft.net>
+---
+ drivers/net/phy/phy_device.c | 30 ++++++++++++++++++++++++++++++
+ include/linux/phy.h          |  1 +
+ 2 files changed, 31 insertions(+)
+
+--- a/drivers/net/phy/phy_device.c
++++ b/drivers/net/phy/phy_device.c
+@@ -1790,6 +1790,36 @@ void phy_support_asym_pause(struct phy_d
+ }
+ EXPORT_SYMBOL(phy_support_asym_pause);
+ 
++/**
++ * phy_set_asym_pause - Configure Pause and Asym Pause
++ * @phydev: target phy_device struct
++ * @rx: Receiver Pause is supported
++ * @tx: Transmit Pause is supported
++ *
++ * Description: Configure advertised Pause support depending on if
++ * transmit and receiver pause is supported. If there has been a
++ * change in adverting, trigger a new autoneg. Generally called from
++ * the set_pauseparam .ndo.
++ */
++void phy_set_asym_pause(struct phy_device *phydev, bool rx, bool tx)
++{
++	u16 oldadv = phydev->advertising;
++	u16 newadv = oldadv &= ~(SUPPORTED_Pause | SUPPORTED_Asym_Pause);
++
++	if (rx)
++		newadv |= SUPPORTED_Pause | SUPPORTED_Asym_Pause;
++	if (tx)
++		newadv ^= SUPPORTED_Asym_Pause;
++
++	if (oldadv != newadv) {
++		phydev->advertising = newadv;
++
++		if (phydev->autoneg)
++			phy_start_aneg(phydev);
++	}
++}
++EXPORT_SYMBOL(phy_set_asym_pause);
++
+ static void of_set_phy_supported(struct phy_device *phydev)
+ {
+ 	struct device_node *node = phydev->mdio.dev.of_node;
+--- a/include/linux/phy.h
++++ b/include/linux/phy.h
+@@ -1050,6 +1050,7 @@ int phy_start_interrupts(struct phy_devi
+ void phy_print_status(struct phy_device *phydev);
+ int phy_set_max_speed(struct phy_device *phydev, u32 max_speed);
+ void phy_support_asym_pause(struct phy_device *phydev);
++void phy_set_asym_pause(struct phy_device *phydev, bool rx, bool tx);
+ 
+ int phy_register_fixup(const char *bus_id, u32 phy_uid, u32 phy_uid_mask,
+ 		       int (*run)(struct phy_device *));
diff --git a/target/linux/generic/backport-5.4/704-v4.20-net-phy-Stop-with-excessive-soft-reset.patch b/target/linux/generic/backport-5.4/704-v4.20-net-phy-Stop-with-excessive-soft-reset.patch
new file mode 100644
index 0000000000..00ef6b7a1d
--- /dev/null
+++ b/target/linux/generic/backport-5.4/704-v4.20-net-phy-Stop-with-excessive-soft-reset.patch
@@ -0,0 +1,40 @@
+From 1541649a9dd79e9b941d399de564475e426a2d0b Mon Sep 17 00:00:00 2001
+From: Florian Fainelli <f.fainelli@gmail.com>
+Date: Tue, 25 Sep 2018 11:28:45 -0700
+Subject: [PATCH 602/660] net: phy: Stop with excessive soft reset
+
+While consolidating the PHY reset in phy_init_hw() an unconditionaly
+BMCR soft-reset I became quite trigger happy with those. This was later
+on deactivated for the Generic PHY driver on the premise that a prior
+software entity (e.g: bootloader) might have applied workarounds in
+commit 0878fff1f42c ("net: phy: Do not perform software reset for
+Generic PHY").
+
+Since we have a hook to wire-up a soft_reset callback, just use that and
+get rid of the call to genphy_soft_reset() entirely. This speeds up
+initialization and link establishment for most PHYs out there that do
+not require a reset.
+
+Fixes: 87aa9f9c61ad ("net: phy: consolidate PHY reset in phy_init_hw()")
+Tested-by: Wang, Dongsheng <dongsheng.wang@hxt-semitech.com>
+Tested-by: Chris Healy <cphealy@gmail.com>
+Tested-by: Andrew Lunn <andrew@lunn.ch>
+Tested-by: Clemens Gruber <clemens.gruber@pqgruber.com>
+Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
+Signed-off-by: David S. Miller <davem@davemloft.net>
+Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
+---
+ drivers/net/phy/phy_device.c | 2 --
+ 1 file changed, 2 deletions(-)
+
+--- a/drivers/net/phy/phy_device.c
++++ b/drivers/net/phy/phy_device.c
+@@ -886,8 +886,6 @@ int phy_init_hw(struct phy_device *phyde
+ 
+ 	if (phydev->drv->soft_reset)
+ 		ret = phydev->drv->soft_reset(phydev);
+-	else
+-		ret = genphy_soft_reset(phydev);
+ 
+ 	if (ret < 0)
+ 		return ret;
diff --git a/target/linux/generic/backport-5.4/705-v5.1-net-phy-provide-full-set-of-accessor-functions-to-MM.patch b/target/linux/generic/backport-5.4/705-v5.1-net-phy-provide-full-set-of-accessor-functions-to-MM.patch
new file mode 100644
index 0000000000..9a587ad3a6
--- /dev/null
+++ b/target/linux/generic/backport-5.4/705-v5.1-net-phy-provide-full-set-of-accessor-functions-to-MM.patch
@@ -0,0 +1,375 @@
+From 80758d9542205cd2e9fa730067bc3888d4f5a096 Mon Sep 17 00:00:00 2001
+From: Nikita Yushchenko <nikita.yoush@cogentembedded.com>
+Date: Wed, 6 Feb 2019 07:36:40 +0100
+Subject: [PATCH 603/660] net: phy: provide full set of accessor functions to
+ MMD registers
+
+This adds full set of locked and unlocked accessor functions to read and
+write PHY MMD registers and/or bitfields.
+
+Set of functions exactly matches what is already available for PHY
+legacy registers.
+
+Signed-off-by: Nikita Yushchenko <nikita.yoush@cogentembedded.com>
+Signed-off-by: Andrew Lunn <andrew@lunn.ch>
+Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
+Signed-off-by: David S. Miller <davem@davemloft.net>
+Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
+---
+ drivers/net/phy/phy-core.c | 116 ++++++++++++++++++++++++++++----
+ include/linux/phy.h        | 134 ++++++++++++++++++++++++++++++-------
+ 2 files changed, 214 insertions(+), 36 deletions(-)
+
+--- a/drivers/net/phy/phy-core.c
++++ b/drivers/net/phy/phy-core.c
+@@ -247,15 +247,15 @@ static void mmd_phy_indirect(struct mii_
+ }
+ 
+ /**
+- * phy_read_mmd - Convenience function for reading a register
++ * __phy_read_mmd - Convenience function for reading a register
+  * from an MMD on a given PHY.
+  * @phydev: The phy_device struct
+  * @devad: The MMD to read from (0..31)
+  * @regnum: The register on the MMD to read (0..65535)
+  *
+- * Same rules as for phy_read();
++ * Same rules as for __phy_read();
+  */
+-int phy_read_mmd(struct phy_device *phydev, int devad, u32 regnum)
++int __phy_read_mmd(struct phy_device *phydev, int devad, u32 regnum)
+ {
+ 	int val;
+ 
+@@ -267,33 +267,52 @@ int phy_read_mmd(struct phy_device *phyd
+ 	} else if (phydev->is_c45) {
+ 		u32 addr = MII_ADDR_C45 | (devad << 16) | (regnum & 0xffff);
+ 
+-		val = mdiobus_read(phydev->mdio.bus, phydev->mdio.addr, addr);
++		val = __mdiobus_read(phydev->mdio.bus, phydev->mdio.addr, addr);
+ 	} else {
+ 		struct mii_bus *bus = phydev->mdio.bus;
+ 		int phy_addr = phydev->mdio.addr;
+ 
+-		mutex_lock(&bus->mdio_lock);
+ 		mmd_phy_indirect(bus, phy_addr, devad, regnum);
+ 
+ 		/* Read the content of the MMD's selected register */
+ 		val = __mdiobus_read(bus, phy_addr, MII_MMD_DATA);
+-		mutex_unlock(&bus->mdio_lock);
+ 	}
+ 	return val;
+ }
++EXPORT_SYMBOL(__phy_read_mmd);
++
++/**
++ * phy_read_mmd - Convenience function for reading a register
++ * from an MMD on a given PHY.
++ * @phydev: The phy_device struct
++ * @devad: The MMD to read from
++ * @regnum: The register on the MMD to read
++ *
++ * Same rules as for phy_read();
++ */
++int phy_read_mmd(struct phy_device *phydev, int devad, u32 regnum)
++{
++	int ret;
++
++	mutex_lock(&phydev->mdio.bus->mdio_lock);
++	ret = __phy_read_mmd(phydev, devad, regnum);
++	mutex_unlock(&phydev->mdio.bus->mdio_lock);
++
++	return ret;
++}
+ EXPORT_SYMBOL(phy_read_mmd);
+ 
+ /**
+- * phy_write_mmd - Convenience function for writing a register
++ * __phy_write_mmd - Convenience function for writing a register
+  * on an MMD on a given PHY.
+  * @phydev: The phy_device struct
+  * @devad: The MMD to read from
+  * @regnum: The register on the MMD to read
+  * @val: value to write to @regnum
+  *
+- * Same rules as for phy_write();
++ * Same rules as for __phy_write();
+  */
+-int phy_write_mmd(struct phy_device *phydev, int devad, u32 regnum, u16 val)
++int __phy_write_mmd(struct phy_device *phydev, int devad, u32 regnum, u16 val)
+ {
+ 	int ret;
+ 
+@@ -305,23 +324,43 @@ int phy_write_mmd(struct phy_device *phy
+ 	} else if (phydev->is_c45) {
+ 		u32 addr = MII_ADDR_C45 | (devad << 16) | (regnum & 0xffff);
+ 
+-		ret = mdiobus_write(phydev->mdio.bus, phydev->mdio.addr,
+-				    addr, val);
++		ret = __mdiobus_write(phydev->mdio.bus, phydev->mdio.addr,
++				      addr, val);
+ 	} else {
+ 		struct mii_bus *bus = phydev->mdio.bus;
+ 		int phy_addr = phydev->mdio.addr;
+ 
+-		mutex_lock(&bus->mdio_lock);
+ 		mmd_phy_indirect(bus, phy_addr, devad, regnum);
+ 
+ 		/* Write the data into MMD's selected register */
+ 		__mdiobus_write(bus, phy_addr, MII_MMD_DATA, val);
+-		mutex_unlock(&bus->mdio_lock);
+ 
+ 		ret = 0;
+ 	}
+ 	return ret;
+ }
++EXPORT_SYMBOL(__phy_write_mmd);
++
++/**
++ * phy_write_mmd - Convenience function for writing a register
++ * on an MMD on a given PHY.
++ * @phydev: The phy_device struct
++ * @devad: The MMD to read from
++ * @regnum: The register on the MMD to read
++ * @val: value to write to @regnum
++ *
++ * Same rules as for phy_write();
++ */
++int phy_write_mmd(struct phy_device *phydev, int devad, u32 regnum, u16 val)
++{
++	int ret;
++
++	mutex_lock(&phydev->mdio.bus->mdio_lock);
++	ret = __phy_write_mmd(phydev, devad, regnum, val);
++	mutex_unlock(&phydev->mdio.bus->mdio_lock);
++
++	return ret;
++}
+ EXPORT_SYMBOL(phy_write_mmd);
+ 
+ /**
+@@ -371,6 +410,57 @@ int phy_modify(struct phy_device *phydev
+ }
+ EXPORT_SYMBOL_GPL(phy_modify);
+ 
++/**
++ * __phy_modify_mmd - Convenience function for modifying a register on MMD
++ * @phydev: the phy_device struct
++ * @devad: the MMD containing register to modify
++ * @regnum: register number to modify
++ * @mask: bit mask of bits to clear
++ * @set: new value of bits set in mask to write to @regnum
++ *
++ * Unlocked helper function which allows a MMD register to be modified as
++ * new register value = (old register value & ~mask) | set
++ */
++int __phy_modify_mmd(struct phy_device *phydev, int devad, u32 regnum,
++		     u16 mask, u16 set)
++{
++	int ret;
++
++	ret = __phy_read_mmd(phydev, devad, regnum);
++	if (ret < 0)
++		return ret;
++
++	ret = __phy_write_mmd(phydev, devad, regnum, (ret & ~mask) | set);
++
++	return ret < 0 ? ret : 0;
++}
++EXPORT_SYMBOL_GPL(__phy_modify_mmd);
++
++/**
++ * phy_modify_mmd - Convenience function for modifying a register on MMD
++ * @phydev: the phy_device struct
++ * @devad: the MMD containing register to modify
++ * @regnum: register number to modify
++ * @mask: bit mask of bits to clear
++ * @set: new value of bits set in mask to write to @regnum
++ *
++ * NOTE: MUST NOT be called from interrupt context,
++ * because the bus read/write functions may wait for an interrupt
++ * to conclude the operation.
++ */
++int phy_modify_mmd(struct phy_device *phydev, int devad, u32 regnum,
++		   u16 mask, u16 set)
++{
++	int ret;
++
++	mutex_lock(&phydev->mdio.bus->mdio_lock);
++	ret = __phy_modify_mmd(phydev, devad, regnum, mask, set);
++	mutex_unlock(&phydev->mdio.bus->mdio_lock);
++
++	return ret;
++}
++EXPORT_SYMBOL_GPL(phy_modify_mmd);
++
+ static int __phy_read_page(struct phy_device *phydev)
+ {
+ 	return phydev->drv->read_page(phydev);
+--- a/include/linux/phy.h
++++ b/include/linux/phy.h
+@@ -695,17 +695,6 @@ size_t phy_speeds(unsigned int *speeds,
+ void phy_resolve_aneg_linkmode(struct phy_device *phydev);
+ 
+ /**
+- * phy_read_mmd - Convenience function for reading a register
+- * from an MMD on a given PHY.
+- * @phydev: The phy_device struct
+- * @devad: The MMD to read from
+- * @regnum: The register on the MMD to read
+- *
+- * Same rules as for phy_read();
+- */
+-int phy_read_mmd(struct phy_device *phydev, int devad, u32 regnum);
+-
+-/**
+  * phy_read - Convenience function for reading a given PHY register
+  * @phydev: the phy_device struct
+  * @regnum: register number to read
+@@ -760,9 +749,60 @@ static inline int __phy_write(struct phy
+ 			       val);
+ }
+ 
++/**
++ * phy_read_mmd - Convenience function for reading a register
++ * from an MMD on a given PHY.
++ * @phydev: The phy_device struct
++ * @devad: The MMD to read from
++ * @regnum: The register on the MMD to read
++ *
++ * Same rules as for phy_read();
++ */
++int phy_read_mmd(struct phy_device *phydev, int devad, u32 regnum);
++
++/**
++ * __phy_read_mmd - Convenience function for reading a register
++ * from an MMD on a given PHY.
++ * @phydev: The phy_device struct
++ * @devad: The MMD to read from
++ * @regnum: The register on the MMD to read
++ *
++ * Same rules as for __phy_read();
++ */
++int __phy_read_mmd(struct phy_device *phydev, int devad, u32 regnum);
++
++/**
++ * phy_write_mmd - Convenience function for writing a register
++ * on an MMD on a given PHY.
++ * @phydev: The phy_device struct
++ * @devad: The MMD to write to
++ * @regnum: The register on the MMD to read
++ * @val: value to write to @regnum
++ *
++ * Same rules as for phy_write();
++ */
++int phy_write_mmd(struct phy_device *phydev, int devad, u32 regnum, u16 val);
++
++/**
++ * __phy_write_mmd - Convenience function for writing a register
++ * on an MMD on a given PHY.
++ * @phydev: The phy_device struct
++ * @devad: The MMD to write to
++ * @regnum: The register on the MMD to read
++ * @val: value to write to @regnum
++ *
++ * Same rules as for __phy_write();
++ */
++int __phy_write_mmd(struct phy_device *phydev, int devad, u32 regnum, u16 val);
++
+ int __phy_modify(struct phy_device *phydev, u32 regnum, u16 mask, u16 set);
+ int phy_modify(struct phy_device *phydev, u32 regnum, u16 mask, u16 set);
+ 
++int __phy_modify_mmd(struct phy_device *phydev, int devad, u32 regnum,
++		u16 mask, u16 set);
++int phy_modify_mmd(struct phy_device *phydev, int devad, u32 regnum,
++		u16 mask, u16 set);
++
+ /**
+  * __phy_set_bits - Convenience function for setting bits in a PHY register
+  * @phydev: the phy_device struct
+@@ -813,6 +853,66 @@ static inline int phy_clear_bits(struct
+ }
+ 
+ /**
++ * __phy_set_bits_mmd - Convenience function for setting bits in a register
++ * on MMD
++ * @phydev: the phy_device struct
++ * @devad: the MMD containing register to modify
++ * @regnum: register number to modify
++ * @val: bits to set
++ *
++ * The caller must have taken the MDIO bus lock.
++ */
++static inline int __phy_set_bits_mmd(struct phy_device *phydev, int devad,
++		u32 regnum, u16 val)
++{
++	return __phy_modify_mmd(phydev, devad, regnum, 0, val);
++}
++
++/**
++ * __phy_clear_bits_mmd - Convenience function for clearing bits in a register
++ * on MMD
++ * @phydev: the phy_device struct
++ * @devad: the MMD containing register to modify
++ * @regnum: register number to modify
++ * @val: bits to clear
++ *
++ * The caller must have taken the MDIO bus lock.
++ */
++static inline int __phy_clear_bits_mmd(struct phy_device *phydev, int devad,
++		u32 regnum, u16 val)
++{
++	return __phy_modify_mmd(phydev, devad, regnum, val, 0);
++}
++
++/**
++ * phy_set_bits_mmd - Convenience function for setting bits in a register
++ * on MMD
++ * @phydev: the phy_device struct
++ * @devad: the MMD containing register to modify
++ * @regnum: register number to modify
++ * @val: bits to set
++ */
++static inline int phy_set_bits_mmd(struct phy_device *phydev, int devad,
++		u32 regnum, u16 val)
++{
++	return phy_modify_mmd(phydev, devad, regnum, 0, val);
++}
++
++/**
++ * phy_clear_bits_mmd - Convenience function for clearing bits in a register
++ * on MMD
++ * @phydev: the phy_device struct
++ * @devad: the MMD containing register to modify
++ * @regnum: register number to modify
++ * @val: bits to clear
++ */
++static inline int phy_clear_bits_mmd(struct phy_device *phydev, int devad,
++		u32 regnum, u16 val)
++{
++	return phy_modify_mmd(phydev, devad, regnum, val, 0);
++}
++
++/**
+  * phy_interrupt_is_valid - Convenience function for testing a given PHY irq
+  * @phydev: the phy_device struct
+  *
+@@ -888,18 +988,6 @@ static inline bool phy_is_pseudo_fixed_l
+ 	return phydev->is_pseudo_fixed_link;
+ }
+ 
+-/**
+- * phy_write_mmd - Convenience function for writing a register
+- * on an MMD on a given PHY.
+- * @phydev: The phy_device struct
+- * @devad: The MMD to read from
+- * @regnum: The register on the MMD to read
+- * @val: value to write to @regnum
+- *
+- * Same rules as for phy_write();
+- */
+-int phy_write_mmd(struct phy_device *phydev, int devad, u32 regnum, u16 val);
+-
+ int phy_save_page(struct phy_device *phydev);
+ int phy_select_page(struct phy_device *phydev, int page);
+ int phy_restore_page(struct phy_device *phydev, int oldpage, int ret);
diff --git a/target/linux/generic/backport-5.4/706-v5.1-net-phy-add-register-modifying-helpers-returning-1-o.patch b/target/linux/generic/backport-5.4/706-v5.1-net-phy-add-register-modifying-helpers-returning-1-o.patch
new file mode 100644
index 0000000000..dddfcc2018
--- /dev/null
+++ b/target/linux/generic/backport-5.4/706-v5.1-net-phy-add-register-modifying-helpers-returning-1-o.patch
@@ -0,0 +1,217 @@
+From c1e3f753f6b85d7636024159bb78f764e09492f1 Mon Sep 17 00:00:00 2001
+From: Heiner Kallweit <hkallweit1@gmail.com>
+Date: Sun, 10 Feb 2019 19:57:56 +0100
+Subject: [PATCH 604/660] net: phy: add register modifying helpers returning 1
+ on change
+
+When modifying registers there are scenarios where we need to know
+whether the register content actually changed. This patch adds
+new helpers to not break users of the current ones, phy_modify() etc.
+
+Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
+Reviewed-by: Andrew Lunn <andrew@lunn.ch>
+Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
+Signed-off-by: David S. Miller <davem@davemloft.net>
+Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
+---
+ drivers/net/phy/phy-core.c | 127 ++++++++++++++++++++++++++++++++++---
+ include/linux/phy.h        |  12 +++-
+ 2 files changed, 128 insertions(+), 11 deletions(-)
+
+--- a/drivers/net/phy/phy-core.c
++++ b/drivers/net/phy/phy-core.c
+@@ -364,7 +364,7 @@ int phy_write_mmd(struct phy_device *phy
+ EXPORT_SYMBOL(phy_write_mmd);
+ 
+ /**
+- * __phy_modify() - Convenience function for modifying a PHY register
++ * __phy_modify_changed() - Convenience function for modifying a PHY register
+  * @phydev: a pointer to a &struct phy_device
+  * @regnum: register number
+  * @mask: bit mask of bits to clear
+@@ -372,16 +372,69 @@ EXPORT_SYMBOL(phy_write_mmd);
+  *
+  * Unlocked helper function which allows a PHY register to be modified as
+  * new register value = (old register value & ~mask) | set
++ *
++ * Returns negative errno, 0 if there was no change, and 1 in case of change
+  */
+-int __phy_modify(struct phy_device *phydev, u32 regnum, u16 mask, u16 set)
++int __phy_modify_changed(struct phy_device *phydev, u32 regnum, u16 mask,
++			 u16 set)
+ {
+-	int ret;
++	int new, ret;
+ 
+ 	ret = __phy_read(phydev, regnum);
+ 	if (ret < 0)
+ 		return ret;
+ 
+-	ret = __phy_write(phydev, regnum, (ret & ~mask) | set);
++	new = (ret & ~mask) | set;
++	if (new == ret)
++		return 0;
++
++	ret = __phy_write(phydev, regnum, new);
++
++	return ret < 0 ? ret : 1;
++}
++EXPORT_SYMBOL_GPL(__phy_modify_changed);
++
++/**
++ * phy_modify_changed - Function for modifying a PHY register
++ * @phydev: the phy_device struct
++ * @regnum: register number to modify
++ * @mask: bit mask of bits to clear
++ * @set: new value of bits set in mask to write to @regnum
++ *
++ * NOTE: MUST NOT be called from interrupt context,
++ * because the bus read/write functions may wait for an interrupt
++ * to conclude the operation.
++ *
++ * Returns negative errno, 0 if there was no change, and 1 in case of change
++ */
++int phy_modify_changed(struct phy_device *phydev, u32 regnum, u16 mask, u16 set)
++{
++	int ret;
++
++	mutex_lock(&phydev->mdio.bus->mdio_lock);
++	ret = __phy_modify_changed(phydev, regnum, mask, set);
++	mutex_unlock(&phydev->mdio.bus->mdio_lock);
++
++	return ret;
++}
++EXPORT_SYMBOL_GPL(phy_modify_changed);
++
++/**
++ * __phy_modify - Convenience function for modifying a PHY register
++ * @phydev: the phy_device struct
++ * @regnum: register number to modify
++ * @mask: bit mask of bits to clear
++ * @set: new value of bits set in mask to write to @regnum
++ *
++ * NOTE: MUST NOT be called from interrupt context,
++ * because the bus read/write functions may wait for an interrupt
++ * to conclude the operation.
++ */
++int __phy_modify(struct phy_device *phydev, u32 regnum, u16 mask, u16 set)
++{
++	int ret;
++
++	ret = __phy_modify_changed(phydev, regnum, mask, set);
+ 
+ 	return ret < 0 ? ret : 0;
+ }
+@@ -411,7 +464,7 @@ int phy_modify(struct phy_device *phydev
+ EXPORT_SYMBOL_GPL(phy_modify);
+ 
+ /**
+- * __phy_modify_mmd - Convenience function for modifying a register on MMD
++ * __phy_modify_mmd_changed - Function for modifying a register on MMD
+  * @phydev: the phy_device struct
+  * @devad: the MMD containing register to modify
+  * @regnum: register number to modify
+@@ -420,17 +473,73 @@ EXPORT_SYMBOL_GPL(phy_modify);
+  *
+  * Unlocked helper function which allows a MMD register to be modified as
+  * new register value = (old register value & ~mask) | set
++ *
++ * Returns negative errno, 0 if there was no change, and 1 in case of change
+  */
+-int __phy_modify_mmd(struct phy_device *phydev, int devad, u32 regnum,
+-		     u16 mask, u16 set)
++int __phy_modify_mmd_changed(struct phy_device *phydev, int devad, u32 regnum,
++			     u16 mask, u16 set)
+ {
+-	int ret;
++	int new, ret;
+ 
+ 	ret = __phy_read_mmd(phydev, devad, regnum);
+ 	if (ret < 0)
+ 		return ret;
+ 
+-	ret = __phy_write_mmd(phydev, devad, regnum, (ret & ~mask) | set);
++	new = (ret & ~mask) | set;
++	if (new == ret)
++		return 0;
++
++	ret = __phy_write_mmd(phydev, devad, regnum, new);
++
++	return ret < 0 ? ret : 1;
++}
++EXPORT_SYMBOL_GPL(__phy_modify_mmd_changed);
++
++/**
++ * phy_modify_mmd_changed - Function for modifying a register on MMD
++ * @phydev: the phy_device struct
++ * @devad: the MMD containing register to modify
++ * @regnum: register number to modify
++ * @mask: bit mask of bits to clear
++ * @set: new value of bits set in mask to write to @regnum
++ *
++ * NOTE: MUST NOT be called from interrupt context,
++ * because the bus read/write functions may wait for an interrupt
++ * to conclude the operation.
++ *
++ * Returns negative errno, 0 if there was no change, and 1 in case of change
++ */
++int phy_modify_mmd_changed(struct phy_device *phydev, int devad, u32 regnum,
++			   u16 mask, u16 set)
++{
++	int ret;
++
++	mutex_lock(&phydev->mdio.bus->mdio_lock);
++	ret = __phy_modify_mmd_changed(phydev, devad, regnum, mask, set);
++	mutex_unlock(&phydev->mdio.bus->mdio_lock);
++
++	return ret;
++}
++EXPORT_SYMBOL_GPL(phy_modify_mmd_changed);
++
++/**
++ * __phy_modify_mmd - Convenience function for modifying a register on MMD
++ * @phydev: the phy_device struct
++ * @devad: the MMD containing register to modify
++ * @regnum: register number to modify
++ * @mask: bit mask of bits to clear
++ * @set: new value of bits set in mask to write to @regnum
++ *
++ * NOTE: MUST NOT be called from interrupt context,
++ * because the bus read/write functions may wait for an interrupt
++ * to conclude the operation.
++ */
++int __phy_modify_mmd(struct phy_device *phydev, int devad, u32 regnum,
++		     u16 mask, u16 set)
++{
++	int ret;
++
++	ret = __phy_modify_mmd_changed(phydev, devad, regnum, mask, set);
+ 
+ 	return ret < 0 ? ret : 0;
+ }
+--- a/include/linux/phy.h
++++ b/include/linux/phy.h
+@@ -795,13 +795,21 @@ int phy_write_mmd(struct phy_device *phy
+  */
+ int __phy_write_mmd(struct phy_device *phydev, int devad, u32 regnum, u16 val);
+ 
++int __phy_modify_changed(struct phy_device *phydev, u32 regnum, u16 mask,
++			 u16 set);
++int phy_modify_changed(struct phy_device *phydev, u32 regnum, u16 mask,
++		       u16 set);
+ int __phy_modify(struct phy_device *phydev, u32 regnum, u16 mask, u16 set);
+ int phy_modify(struct phy_device *phydev, u32 regnum, u16 mask, u16 set);
+ 
++int __phy_modify_mmd_changed(struct phy_device *phydev, int devad, u32 regnum,
++			     u16 mask, u16 set);
++int phy_modify_mmd_changed(struct phy_device *phydev, int devad, u32 regnum,
++			   u16 mask, u16 set);
+ int __phy_modify_mmd(struct phy_device *phydev, int devad, u32 regnum,
+-		u16 mask, u16 set);
++		     u16 mask, u16 set);
+ int phy_modify_mmd(struct phy_device *phydev, int devad, u32 regnum,
+-		u16 mask, u16 set);
++		   u16 mask, u16 set);
+ 
+ /**
+  * __phy_set_bits - Convenience function for setting bits in a PHY register
diff --git a/target/linux/generic/backport-5.4/707-v5.1-net-phy-add-genphy_c45_check_and_restart_aneg.patch b/target/linux/generic/backport-5.4/707-v5.1-net-phy-add-genphy_c45_check_and_restart_aneg.patch
new file mode 100644
index 0000000000..6d47fa9634
--- /dev/null
+++ b/target/linux/generic/backport-5.4/707-v5.1-net-phy-add-genphy_c45_check_and_restart_aneg.patch
@@ -0,0 +1,64 @@
+From 2c3db705737cf52d7d24c993f0889b25b956c718 Mon Sep 17 00:00:00 2001
+From: Heiner Kallweit <hkallweit1@gmail.com>
+Date: Mon, 18 Feb 2019 21:27:18 +0100
+Subject: [PATCH 605/660] net: phy: add genphy_c45_check_and_restart_aneg
+
+This function will be used by config_aneg callback implementations of
+PHY drivers and allows to reduce boilerplate code.
+
+Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
+Signed-off-by: David S. Miller <davem@davemloft.net>
+---
+ drivers/net/phy/phy-c45.c | 30 ++++++++++++++++++++++++++++++
+ include/linux/phy.h       |  1 +
+ 2 files changed, 31 insertions(+)
+
+--- a/drivers/net/phy/phy-c45.c
++++ b/drivers/net/phy/phy-c45.c
+@@ -110,6 +110,36 @@ int genphy_c45_restart_aneg(struct phy_d
+ EXPORT_SYMBOL_GPL(genphy_c45_restart_aneg);
+ 
+ /**
++ * genphy_c45_check_and_restart_aneg - Enable and restart auto-negotiation
++ * @phydev: target phy_device struct
++ * @restart: whether aneg restart is requested
++ *
++ * This assumes that the auto-negotiation MMD is present.
++ *
++ * Check, and restart auto-negotiation if needed.
++ */
++int genphy_c45_check_and_restart_aneg(struct phy_device *phydev, bool restart)
++{
++	int ret = 0;
++
++	if (!restart) {
++		/* Configure and restart aneg if it wasn't set before */
++		ret = phy_read_mmd(phydev, MDIO_MMD_AN, MDIO_CTRL1);
++		if (ret < 0)
++			return ret;
++
++		if (!(ret & MDIO_AN_CTRL1_ENABLE))
++			restart = true;
++	}
++
++	if (restart)
++		ret = genphy_c45_restart_aneg(phydev);
++
++	return ret;
++}
++EXPORT_SYMBOL_GPL(genphy_c45_check_and_restart_aneg);
++
++/**
+  * genphy_c45_aneg_done - return auto-negotiation complete status
+  * @phydev: target phy_device struct
+  *
+--- a/include/linux/phy.h
++++ b/include/linux/phy.h
+@@ -1098,6 +1098,7 @@ int genphy_write_mmd_unsupported(struct
+ 
+ /* Clause 45 PHY */
+ int genphy_c45_restart_aneg(struct phy_device *phydev);
++int genphy_c45_check_and_restart_aneg(struct phy_device *phydev, bool restart);
+ int genphy_c45_aneg_done(struct phy_device *phydev);
+ int genphy_c45_read_link(struct phy_device *phydev, u32 mmd_mask);
+ int genphy_c45_read_lpa(struct phy_device *phydev);
diff --git a/target/linux/generic/backport-5.4/708-v5.3-net-phylink-remove-netdev-from-phylink-mii-ioctl-emu.patch b/target/linux/generic/backport-5.4/708-v5.3-net-phylink-remove-netdev-from-phylink-mii-ioctl-emu.patch
new file mode 100644
index 0000000000..1c3f1cc01a
--- /dev/null
+++ b/target/linux/generic/backport-5.4/708-v5.3-net-phylink-remove-netdev-from-phylink-mii-ioctl-emu.patch
@@ -0,0 +1,59 @@
+From 4c4323084e9a67210c8d269dceba1be99356c414 Mon Sep 17 00:00:00 2001
+From: Russell King <rmk+kernel@armlinux.org.uk>
+Date: Tue, 28 May 2019 10:57:18 +0100
+Subject: [PATCH 606/660] net: phylink: remove netdev from phylink mii ioctl
+ emulation
+
+The netdev used in the phylink ioctl emulation is never used, so let's
+remove it.
+
+Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
+Reviewed-by: Andrew Lunn <andrew@lunn.ch>
+Signed-off-by: David S. Miller <davem@davemloft.net>
+Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
+---
+ drivers/net/phy/phylink.c | 12 ++++--------
+ 1 file changed, 4 insertions(+), 8 deletions(-)
+
+--- a/drivers/net/phy/phylink.c
++++ b/drivers/net/phy/phylink.c
+@@ -1360,8 +1360,8 @@ EXPORT_SYMBOL_GPL(phylink_ethtool_set_ee
+  *
+  * FIXME: should deal with negotiation state too.
+  */
+-static int phylink_mii_emul_read(struct net_device *ndev, unsigned int reg,
+-				 struct phylink_link_state *state, bool aneg)
++static int phylink_mii_emul_read(unsigned int reg,
++				 struct phylink_link_state *state)
+ {
+ 	struct fixed_phy_status fs;
+ 	int val;
+@@ -1376,8 +1376,6 @@ static int phylink_mii_emul_read(struct
+ 	if (reg == MII_BMSR) {
+ 		if (!state->an_complete)
+ 			val &= ~BMSR_ANEGCOMPLETE;
+-		if (!aneg)
+-			val &= ~BMSR_ANEGCAPABLE;
+ 	}
+ 	return val;
+ }
+@@ -1473,8 +1471,7 @@ static int phylink_mii_read(struct phyli
+ 	case MLO_AN_FIXED:
+ 		if (phy_id == 0) {
+ 			phylink_get_fixed_state(pl, &state);
+-			val = phylink_mii_emul_read(pl->netdev, reg, &state,
+-						    true);
++			val = phylink_mii_emul_read(reg, &state);
+ 		}
+ 		break;
+ 
+@@ -1487,8 +1484,7 @@ static int phylink_mii_read(struct phyli
+ 			if (val < 0)
+ 				return val;
+ 
+-			val = phylink_mii_emul_read(pl->netdev, reg, &state,
+-						    true);
++			val = phylink_mii_emul_read(reg, &state);
+ 		}
+ 		break;
+ 	}
diff --git a/target/linux/generic/backport-5.4/709-v5.3-net-phylink-support-for-link-gpio-interrupt.patch b/target/linux/generic/backport-5.4/709-v5.3-net-phylink-support-for-link-gpio-interrupt.patch
new file mode 100644
index 0000000000..84a1c853d1
--- /dev/null
+++ b/target/linux/generic/backport-5.4/709-v5.3-net-phylink-support-for-link-gpio-interrupt.patch
@@ -0,0 +1,90 @@
+From cba0aba37d2228556e0d1f776d403435868cdbfa Mon Sep 17 00:00:00 2001
+From: Russell King <rmk+kernel@armlinux.org.uk>
+Date: Tue, 28 May 2019 10:57:23 +0100
+Subject: [PATCH 607/660] net: phylink: support for link gpio interrupt
+
+Add support for using GPIO interrupts with a fixed-link GPIO rather than
+polling the GPIO every second and invoking the phylink resolution.  This
+avoids unnecessary calls to mac_config().
+
+Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
+Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
+Signed-off-by: David S. Miller <davem@davemloft.net>
+Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
+---
+ drivers/net/phy/phylink.c | 36 ++++++++++++++++++++++++++++++++----
+ 1 file changed, 32 insertions(+), 4 deletions(-)
+
+--- a/drivers/net/phy/phylink.c
++++ b/drivers/net/phy/phylink.c
+@@ -59,6 +59,7 @@ struct phylink {
+ 	phy_interface_t cur_interface;
+ 
+ 	struct gpio_desc *link_gpio;
++	unsigned int link_irq;
+ 	struct timer_list link_poll;
+ 	void (*get_fixed_state)(struct net_device *dev,
+ 				struct phylink_link_state *s);
+@@ -645,7 +646,7 @@ void phylink_destroy(struct phylink *pl)
+ {
+ 	if (pl->sfp_bus)
+ 		sfp_unregister_upstream(pl->sfp_bus);
+-	if (!IS_ERR_OR_NULL(pl->link_gpio))
++	if (pl->link_gpio)
+ 		gpiod_put(pl->link_gpio);
+ 
+ 	cancel_work_sync(&pl->resolve);
+@@ -912,6 +913,15 @@ void phylink_mac_change(struct phylink *
+ }
+ EXPORT_SYMBOL_GPL(phylink_mac_change);
+ 
++static irqreturn_t phylink_link_handler(int irq, void *data)
++{
++	struct phylink *pl = data;
++
++	phylink_run_resolve(pl);
++
++	return IRQ_HANDLED;
++}
++
+ /**
+  * phylink_start() - start a phylink instance
+  * @pl: a pointer to a &struct phylink returned from phylink_create()
+@@ -947,7 +957,22 @@ void phylink_start(struct phylink *pl)
+ 	clear_bit(PHYLINK_DISABLE_STOPPED, &pl->phylink_disable_state);
+ 	phylink_run_resolve(pl);
+ 
+-	if (pl->link_an_mode == MLO_AN_FIXED && !IS_ERR(pl->link_gpio))
++	if (pl->link_an_mode == MLO_AN_FIXED && pl->link_gpio) {
++		int irq = gpiod_to_irq(pl->link_gpio);
++
++		if (irq > 0) {
++			if (!request_irq(irq, phylink_link_handler,
++					 IRQF_TRIGGER_RISING |
++					 IRQF_TRIGGER_FALLING,
++					 "netdev link", pl))
++				pl->link_irq = irq;
++			else
++				irq = 0;
++		}
++		if (irq <= 0)
++			mod_timer(&pl->link_poll, jiffies + HZ);
++	}
++	if (pl->link_an_mode == MLO_AN_FIXED && pl->get_fixed_state)
+ 		mod_timer(&pl->link_poll, jiffies + HZ);
+ 	if (pl->sfp_bus)
+ 		sfp_upstream_start(pl->sfp_bus);
+@@ -973,8 +998,11 @@ void phylink_stop(struct phylink *pl)
+ 		phy_stop(pl->phydev);
+ 	if (pl->sfp_bus)
+ 		sfp_upstream_stop(pl->sfp_bus);
+-	if (pl->link_an_mode == MLO_AN_FIXED && !IS_ERR(pl->link_gpio))
+-		del_timer_sync(&pl->link_poll);
++	del_timer_sync(&pl->link_poll);
++	if (pl->link_irq) {
++		free_irq(pl->link_irq, pl);
++		pl->link_irq = 0;
++	}
+ 
+ 	phylink_run_resolve_and_disable(pl, PHYLINK_DISABLE_STOPPED);
+ }
diff --git a/target/linux/generic/backport-5.4/710-v5.3-net-phy-allow-Clause-45-access-via-mii-ioctl.patch b/target/linux/generic/backport-5.4/710-v5.3-net-phy-allow-Clause-45-access-via-mii-ioctl.patch
new file mode 100644
index 0000000000..3a601c65b0
--- /dev/null
+++ b/target/linux/generic/backport-5.4/710-v5.3-net-phy-allow-Clause-45-access-via-mii-ioctl.patch
@@ -0,0 +1,77 @@
+From eb5df3d026824832831376bbdf04e01a52776eea Mon Sep 17 00:00:00 2001
+From: Russell King <rmk+kernel@armlinux.org.uk>
+Date: Tue, 28 May 2019 10:57:29 +0100
+Subject: [PATCH 608/660] net: phy: allow Clause 45 access via mii ioctl
+
+Allow userspace to generate Clause 45 MII access cycles via phylib.
+This is useful for tools such as mii-diag to be able to inspect Clause
+45 PHYs.
+
+Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
+Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
+Signed-off-by: David S. Miller <davem@davemloft.net>
+Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
+---
+ drivers/net/phy/phy.c | 33 ++++++++++++++++++++++++---------
+ 1 file changed, 24 insertions(+), 9 deletions(-)
+
+--- a/drivers/net/phy/phy.c
++++ b/drivers/net/phy/phy.c
+@@ -397,6 +397,7 @@ int phy_mii_ioctl(struct phy_device *phy
+ 	struct mii_ioctl_data *mii_data = if_mii(ifr);
+ 	u16 val = mii_data->val_in;
+ 	bool change_autoneg = false;
++	int prtad, devad;
+ 
+ 	switch (cmd) {
+ 	case SIOCGMIIPHY:
+@@ -404,14 +405,29 @@ int phy_mii_ioctl(struct phy_device *phy
+ 		/* fall through */
+ 
+ 	case SIOCGMIIREG:
+-		mii_data->val_out = mdiobus_read(phydev->mdio.bus,
+-						 mii_data->phy_id,
+-						 mii_data->reg_num);
++		if (mdio_phy_id_is_c45(mii_data->phy_id)) {
++			prtad = mdio_phy_id_prtad(mii_data->phy_id);
++			devad = mdio_phy_id_devad(mii_data->phy_id);
++			devad = MII_ADDR_C45 | devad << 16 | mii_data->reg_num;
++		} else {
++			prtad = mii_data->phy_id;
++			devad = mii_data->reg_num;
++		}
++		mii_data->val_out = mdiobus_read(phydev->mdio.bus, prtad,
++						 devad);
+ 		return 0;
+ 
+ 	case SIOCSMIIREG:
+-		if (mii_data->phy_id == phydev->mdio.addr) {
+-			switch (mii_data->reg_num) {
++		if (mdio_phy_id_is_c45(mii_data->phy_id)) {
++			prtad = mdio_phy_id_prtad(mii_data->phy_id);
++			devad = mdio_phy_id_devad(mii_data->phy_id);
++			devad = MII_ADDR_C45 | devad << 16 | mii_data->reg_num;
++		} else {
++			prtad = mii_data->phy_id;
++			devad = mii_data->reg_num;
++		}
++		if (prtad == phydev->mdio.addr) {
++			switch (devad) {
+ 			case MII_BMCR:
+ 				if ((val & (BMCR_RESET | BMCR_ANENABLE)) == 0) {
+ 					if (phydev->autoneg == AUTONEG_ENABLE)
+@@ -443,11 +459,10 @@ int phy_mii_ioctl(struct phy_device *phy
+ 			}
+ 		}
+ 
+-		mdiobus_write(phydev->mdio.bus, mii_data->phy_id,
+-			      mii_data->reg_num, val);
++		mdiobus_write(phydev->mdio.bus, prtad, devad, val);
+ 
+-		if (mii_data->phy_id == phydev->mdio.addr &&
+-		    mii_data->reg_num == MII_BMCR &&
++		if (prtad == phydev->mdio.addr &&
++		    devad == MII_BMCR &&
+ 		    val & BMCR_RESET)
+ 			return phy_init_hw(phydev);
+ 
diff --git a/target/linux/generic/backport-5.4/711-v5.3-net-sfp-add-mandatory-attach-detach-methods-for-sfp-.patch b/target/linux/generic/backport-5.4/711-v5.3-net-sfp-add-mandatory-attach-detach-methods-for-sfp-.patch
new file mode 100644
index 0000000000..74dc39fa7f
--- /dev/null
+++ b/target/linux/generic/backport-5.4/711-v5.3-net-sfp-add-mandatory-attach-detach-methods-for-sfp-.patch
@@ -0,0 +1,94 @@
+From aeabfaa63285470e81fa341e14f92d68880aa160 Mon Sep 17 00:00:00 2001
+From: Russell King <rmk+kernel@armlinux.org.uk>
+Date: Tue, 28 May 2019 10:57:34 +0100
+Subject: [PATCH 609/660] net: sfp: add mandatory attach/detach methods for sfp
+ buses
+
+Add attach and detach methods for SFP buses, which will allow us to get
+rid of the netdev storage in sfp-bus.
+
+Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
+Reviewed-by: Andrew Lunn <andrew@lunn.ch>
+Signed-off-by: David S. Miller <davem@davemloft.net>
+Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
+---
+ drivers/net/phy/phylink.c | 16 ++++++++++++++++
+ drivers/net/phy/sfp-bus.c |  4 ++--
+ include/linux/sfp.h       |  6 ++++++
+ 3 files changed, 24 insertions(+), 2 deletions(-)
+
+--- a/drivers/net/phy/phylink.c
++++ b/drivers/net/phy/phylink.c
+@@ -1615,6 +1615,20 @@ int phylink_mii_ioctl(struct phylink *pl
+ }
+ EXPORT_SYMBOL_GPL(phylink_mii_ioctl);
+ 
++static void phylink_sfp_attach(void *upstream, struct sfp_bus *bus)
++{
++	struct phylink *pl = upstream;
++
++	pl->netdev->sfp_bus = bus;
++}
++
++static void phylink_sfp_detach(void *upstream, struct sfp_bus *bus)
++{
++	struct phylink *pl = upstream;
++
++	pl->netdev->sfp_bus = NULL;
++}
++
+ static int phylink_sfp_module_insert(void *upstream,
+ 				     const struct sfp_eeprom_id *id)
+ {
+@@ -1733,6 +1747,8 @@ static void phylink_sfp_disconnect_phy(v
+ }
+ 
+ static const struct sfp_upstream_ops sfp_phylink_ops = {
++	.attach = phylink_sfp_attach,
++	.detach = phylink_sfp_detach,
+ 	.module_insert = phylink_sfp_module_insert,
+ 	.link_up = phylink_sfp_link_up,
+ 	.link_down = phylink_sfp_link_down,
+--- a/drivers/net/phy/sfp-bus.c
++++ b/drivers/net/phy/sfp-bus.c
+@@ -350,7 +350,7 @@ static int sfp_register_bus(struct sfp_b
+ 	bus->socket_ops->attach(bus->sfp);
+ 	if (bus->started)
+ 		bus->socket_ops->start(bus->sfp);
+-	bus->netdev->sfp_bus = bus;
++	bus->upstream_ops->attach(bus->upstream, bus);
+ 	bus->registered = true;
+ 	return 0;
+ }
+@@ -359,8 +359,8 @@ static void sfp_unregister_bus(struct sf
+ {
+ 	const struct sfp_upstream_ops *ops = bus->upstream_ops;
+ 
+-	bus->netdev->sfp_bus = NULL;
+ 	if (bus->registered) {
++		bus->upstream_ops->detach(bus->upstream, bus);
+ 		if (bus->started)
+ 			bus->socket_ops->stop(bus->sfp);
+ 		bus->socket_ops->detach(bus->sfp);
+--- a/include/linux/sfp.h
++++ b/include/linux/sfp.h
+@@ -469,6 +469,10 @@ struct sfp_bus;
+ 
+ /**
+  * struct sfp_upstream_ops - upstream operations structure
++ * @attach: called when the sfp socket driver is bound to the upstream
++ *   (mandatory).
++ * @detach: called when the sfp socket driver is unbound from the upstream
++ *   (mandatory).
+  * @module_insert: called after a module has been detected to determine
+  *   whether the module is supported for the upstream device.
+  * @module_remove: called after the module has been removed.
+@@ -481,6 +485,8 @@ struct sfp_bus;
+  *   been removed.
+  */
+ struct sfp_upstream_ops {
++	void (*attach)(void *priv, struct sfp_bus *bus);
++	void (*detach)(void *priv, struct sfp_bus *bus);
+ 	int (*module_insert)(void *priv, const struct sfp_eeprom_id *id);
+ 	void (*module_remove)(void *priv);
+ 	void (*link_down)(void *priv);
diff --git a/target/linux/generic/backport-5.4/712-v5.3-net-sfp-remove-sfp-bus-use-of-netdevs.patch b/target/linux/generic/backport-5.4/712-v5.3-net-sfp-remove-sfp-bus-use-of-netdevs.patch
new file mode 100644
index 0000000000..8f0c37e092
--- /dev/null
+++ b/target/linux/generic/backport-5.4/712-v5.3-net-sfp-remove-sfp-bus-use-of-netdevs.patch
@@ -0,0 +1,118 @@
+From 60d756717d772be90d07a07cd2cc140c76da3e4a Mon Sep 17 00:00:00 2001
+From: Russell King <rmk+kernel@armlinux.org.uk>
+Date: Tue, 28 May 2019 10:57:39 +0100
+Subject: [PATCH 610/660] net: sfp: remove sfp-bus use of netdevs
+
+The sfp-bus code now no longer has any use for the network device
+structure, so remove its use.
+
+Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
+Reviewed-by: Andrew Lunn <andrew@lunn.ch>
+Signed-off-by: David S. Miller <davem@davemloft.net>
+Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
+---
+ drivers/net/phy/phylink.c |  3 +--
+ drivers/net/phy/sfp-bus.c | 10 +++-------
+ include/linux/sfp.h       |  6 ++----
+ 3 files changed, 6 insertions(+), 13 deletions(-)
+
+--- a/drivers/net/phy/phylink.c
++++ b/drivers/net/phy/phylink.c
+@@ -555,8 +555,7 @@ static int phylink_register_sfp(struct p
+ 		return ret;
+ 	}
+ 
+-	pl->sfp_bus = sfp_register_upstream(ref.fwnode, pl->netdev, pl,
+-					    &sfp_phylink_ops);
++	pl->sfp_bus = sfp_register_upstream(ref.fwnode, pl, &sfp_phylink_ops);
+ 	if (!pl->sfp_bus)
+ 		return -ENOMEM;
+ 
+--- a/drivers/net/phy/sfp-bus.c
++++ b/drivers/net/phy/sfp-bus.c
+@@ -23,7 +23,6 @@ struct sfp_bus {
+ 
+ 	const struct sfp_upstream_ops *upstream_ops;
+ 	void *upstream;
+-	struct net_device *netdev;
+ 	struct phy_device *phydev;
+ 
+ 	bool registered;
+@@ -442,13 +441,11 @@ static void sfp_upstream_clear(struct sf
+ {
+ 	bus->upstream_ops = NULL;
+ 	bus->upstream = NULL;
+-	bus->netdev = NULL;
+ }
+ 
+ /**
+  * sfp_register_upstream() - Register the neighbouring device
+  * @fwnode: firmware node for the SFP bus
+- * @ndev: network device associated with the interface
+  * @upstream: the upstream private data
+  * @ops: the upstream's &struct sfp_upstream_ops
+  *
+@@ -459,7 +456,7 @@ static void sfp_upstream_clear(struct sf
+  * On error, returns %NULL.
+  */
+ struct sfp_bus *sfp_register_upstream(struct fwnode_handle *fwnode,
+-				      struct net_device *ndev, void *upstream,
++				      void *upstream,
+ 				      const struct sfp_upstream_ops *ops)
+ {
+ 	struct sfp_bus *bus = sfp_bus_get(fwnode);
+@@ -469,7 +466,6 @@ struct sfp_bus *sfp_register_upstream(st
+ 		rtnl_lock();
+ 		bus->upstream_ops = ops;
+ 		bus->upstream = upstream;
+-		bus->netdev = ndev;
+ 
+ 		if (bus->sfp) {
+ 			ret = sfp_register_bus(bus);
+@@ -591,7 +587,7 @@ struct sfp_bus *sfp_register_socket(stru
+ 		bus->sfp = sfp;
+ 		bus->socket_ops = ops;
+ 
+-		if (bus->netdev) {
++		if (bus->upstream_ops) {
+ 			ret = sfp_register_bus(bus);
+ 			if (ret)
+ 				sfp_socket_clear(bus);
+@@ -611,7 +607,7 @@ EXPORT_SYMBOL_GPL(sfp_register_socket);
+ void sfp_unregister_socket(struct sfp_bus *bus)
+ {
+ 	rtnl_lock();
+-	if (bus->netdev)
++	if (bus->upstream_ops)
+ 		sfp_unregister_bus(bus);
+ 	sfp_socket_clear(bus);
+ 	rtnl_unlock();
+--- a/include/linux/sfp.h
++++ b/include/linux/sfp.h
+@@ -464,7 +464,6 @@ enum {
+ struct fwnode_handle;
+ struct ethtool_eeprom;
+ struct ethtool_modinfo;
+-struct net_device;
+ struct sfp_bus;
+ 
+ /**
+@@ -510,7 +509,7 @@ int sfp_get_module_eeprom(struct sfp_bus
+ void sfp_upstream_start(struct sfp_bus *bus);
+ void sfp_upstream_stop(struct sfp_bus *bus);
+ struct sfp_bus *sfp_register_upstream(struct fwnode_handle *fwnode,
+-				      struct net_device *ndev, void *upstream,
++				      void *upstream,
+ 				      const struct sfp_upstream_ops *ops);
+ void sfp_unregister_upstream(struct sfp_bus *bus);
+ #else
+@@ -555,8 +554,7 @@ static inline void sfp_upstream_stop(str
+ }
+ 
+ static inline struct sfp_bus *sfp_register_upstream(
+-	struct fwnode_handle *fwnode,
+-	struct net_device *ndev, void *upstream,
++	struct fwnode_handle *fwnode, void *upstream,
+ 	const struct sfp_upstream_ops *ops)
+ {
+ 	return (struct sfp_bus *)-1;
diff --git a/target/linux/generic/backport-5.4/713-v5.2-net-phylink-avoid-reducing-support-mask.patch b/target/linux/generic/backport-5.4/713-v5.2-net-phylink-avoid-reducing-support-mask.patch
new file mode 100644
index 0000000000..3aa8d9e571
--- /dev/null
+++ b/target/linux/generic/backport-5.4/713-v5.2-net-phylink-avoid-reducing-support-mask.patch
@@ -0,0 +1,84 @@
+From 8ac1d3e5cf7d277769ba3403d99f643fab1e3fae Mon Sep 17 00:00:00 2001
+From: Russell King <rmk+kernel@armlinux.org.uk>
+Date: Sat, 23 Nov 2019 14:19:54 +0000
+Subject: [PATCH 611/660] net: phylink: avoid reducing support mask
+
+Avoid reducing the support mask as a result of the interface type
+selected for SFP modules, or when setting the link settings through
+ethtool - this should only change when the supported link modes of
+the hardware combination change.
+
+Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
+Signed-off-by: David S. Miller <davem@davemloft.net>
+---
+ drivers/net/phy/phylink.c | 13 +++++++++----
+ 1 file changed, 9 insertions(+), 4 deletions(-)
+
+--- a/drivers/net/phy/phylink.c
++++ b/drivers/net/phy/phylink.c
+@@ -1137,6 +1137,7 @@ EXPORT_SYMBOL_GPL(phylink_ethtool_ksetti
+ int phylink_ethtool_ksettings_set(struct phylink *pl,
+ 				  const struct ethtool_link_ksettings *kset)
+ {
++	__ETHTOOL_DECLARE_LINK_MODE_MASK(support);
+ 	struct ethtool_link_ksettings our_kset;
+ 	struct phylink_link_state config;
+ 	int ret;
+@@ -1147,11 +1148,12 @@ int phylink_ethtool_ksettings_set(struct
+ 	    kset->base.autoneg != AUTONEG_ENABLE)
+ 		return -EINVAL;
+ 
++	linkmode_copy(support, pl->supported);
+ 	config = pl->link_config;
+ 
+ 	/* Mask out unsupported advertisements */
+ 	linkmode_and(config.advertising, kset->link_modes.advertising,
+-		     pl->supported);
++		     support);
+ 
+ 	/* FIXME: should we reject autoneg if phy/mac does not support it? */
+ 	if (kset->base.autoneg == AUTONEG_DISABLE) {
+@@ -1161,7 +1163,7 @@ int phylink_ethtool_ksettings_set(struct
+ 		 * duplex.
+ 		 */
+ 		s = phy_lookup_setting(kset->base.speed, kset->base.duplex,
+-				       pl->supported,
++				       support,
+ 				       __ETHTOOL_LINK_MODE_MASK_NBITS, false);
+ 		if (!s)
+ 			return -EINVAL;
+@@ -1191,7 +1193,7 @@ int phylink_ethtool_ksettings_set(struct
+ 		__set_bit(ETHTOOL_LINK_MODE_Autoneg_BIT, config.advertising);
+ 	}
+ 
+-	if (phylink_validate(pl, pl->supported, &config))
++	if (phylink_validate(pl, support, &config))
+ 		return -EINVAL;
+ 
+ 	/* If autonegotiation is enabled, we must have an advertisement */
+@@ -1633,6 +1635,7 @@ static int phylink_sfp_module_insert(voi
+ {
+ 	struct phylink *pl = upstream;
+ 	__ETHTOOL_DECLARE_LINK_MODE_MASK(support) = { 0, };
++	__ETHTOOL_DECLARE_LINK_MODE_MASK(support1);
+ 	struct phylink_link_state config;
+ 	phy_interface_t iface;
+ 	int ret = 0;
+@@ -1660,6 +1663,8 @@ static int phylink_sfp_module_insert(voi
+ 		return ret;
+ 	}
+ 
++	linkmode_copy(support1, support);
++
+ 	iface = sfp_select_interface(pl->sfp_bus, id, config.advertising);
+ 	if (iface == PHY_INTERFACE_MODE_NA) {
+ 		netdev_err(pl->netdev,
+@@ -1669,7 +1674,7 @@ static int phylink_sfp_module_insert(voi
+ 	}
+ 
+ 	config.interface = iface;
+-	ret = phylink_validate(pl, support, &config);
++	ret = phylink_validate(pl, support1, &config);
+ 	if (ret) {
+ 		netdev_err(pl->netdev, "validation of %s/%s with support %*pb failed: %d\n",
+ 			   phylink_an_mode_str(MLO_AN_INBAND),
diff --git a/target/linux/generic/backport-5.4/714-v5.3-net-sfp-Stop-SFP-polling-and-interrupt-handling-duri.patch b/target/linux/generic/backport-5.4/714-v5.3-net-sfp-Stop-SFP-polling-and-interrupt-handling-duri.patch
new file mode 100644
index 0000000000..0509950296
--- /dev/null
+++ b/target/linux/generic/backport-5.4/714-v5.3-net-sfp-Stop-SFP-polling-and-interrupt-handling-duri.patch
@@ -0,0 +1,94 @@
+From 254236a22109efa84c9e9f5a9c76a1719439e309 Mon Sep 17 00:00:00 2001
+From: Robert Hancock <hancock@sedsystems.ca>
+Date: Fri, 7 Jun 2019 10:42:35 -0600
+Subject: [PATCH 612/660] net: sfp: Stop SFP polling and interrupt handling
+ during shutdown
+
+SFP device polling can cause problems during the shutdown process if the
+parent devices of the network controller have been shut down already.
+This problem was seen on the iMX6 platform with PCIe devices, where
+accessing the device after the bus is shut down causes a hang.
+
+Free any acquired GPIO interrupts and stop all delayed work in the SFP
+driver during the shutdown process, so that we ensure that no pending
+operations are still occurring after the SFP shutdown completes.
+
+Signed-off-by: Robert Hancock <hancock@sedsystems.ca>
+Signed-off-by: David S. Miller <davem@davemloft.net>
+---
+ drivers/net/phy/sfp.c | 31 ++++++++++++++++++++++++++-----
+ 1 file changed, 26 insertions(+), 5 deletions(-)
+
+--- a/drivers/net/phy/sfp.c
++++ b/drivers/net/phy/sfp.c
+@@ -183,6 +183,7 @@ struct sfp {
+ 	int (*write)(struct sfp *, bool, u8, void *, size_t);
+ 
+ 	struct gpio_desc *gpio[GPIO_MAX];
++	int gpio_irq[GPIO_MAX];
+ 
+ 	bool attached;
+ 	struct mutex st_mutex;			/* Protects state */
+@@ -1803,7 +1804,7 @@ static int sfp_probe(struct platform_dev
+ 	const struct sff_data *sff;
+ 	struct sfp *sfp;
+ 	bool poll = false;
+-	int irq, err, i;
++	int err, i;
+ 
+ 	sfp = sfp_alloc(&pdev->dev);
+ 	if (IS_ERR(sfp))
+@@ -1885,19 +1886,22 @@ static int sfp_probe(struct platform_dev
+ 		if (gpio_flags[i] != GPIOD_IN || !sfp->gpio[i])
+ 			continue;
+ 
+-		irq = gpiod_to_irq(sfp->gpio[i]);
+-		if (!irq) {
++		sfp->gpio_irq[i] = gpiod_to_irq(sfp->gpio[i]);
++		if (!sfp->gpio_irq[i]) {
+ 			poll = true;
+ 			continue;
+ 		}
+ 
+-		err = devm_request_threaded_irq(sfp->dev, irq, NULL, sfp_irq,
++		err = devm_request_threaded_irq(sfp->dev, sfp->gpio_irq[i],
++						NULL, sfp_irq,
+ 						IRQF_ONESHOT |
+ 						IRQF_TRIGGER_RISING |
+ 						IRQF_TRIGGER_FALLING,
+ 						dev_name(sfp->dev), sfp);
+-		if (err)
++		if (err) {
++			sfp->gpio_irq[i] = 0;
+ 			poll = true;
++		}
+ 	}
+ 
+ 	if (poll)
+@@ -1928,9 +1932,26 @@ static int sfp_remove(struct platform_de
+ 	return 0;
+ }
+ 
++static void sfp_shutdown(struct platform_device *pdev)
++{
++	struct sfp *sfp = platform_get_drvdata(pdev);
++	int i;
++
++	for (i = 0; i < GPIO_MAX; i++) {
++		if (!sfp->gpio_irq[i])
++			continue;
++
++		devm_free_irq(sfp->dev, sfp->gpio_irq[i], sfp);
++	}
++
++	cancel_delayed_work_sync(&sfp->poll);
++	cancel_delayed_work_sync(&sfp->timeout);
++}
++
+ static struct platform_driver sfp_driver = {
+ 	.probe = sfp_probe,
+ 	.remove = sfp_remove,
++	.shutdown = sfp_shutdown,
+ 	.driver = {
+ 		.name = "sfp",
+ 		.of_match_table = sfp_of_match,
diff --git a/target/linux/generic/backport-5.4/715-v5.3-net-phylink-don-t-start-and-stop-SGMII-PHYs-in-SFP-m.patch b/target/linux/generic/backport-5.4/715-v5.3-net-phylink-don-t-start-and-stop-SGMII-PHYs-in-SFP-m.patch
new file mode 100644
index 0000000000..94fb2fb3e4
--- /dev/null
+++ b/target/linux/generic/backport-5.4/715-v5.3-net-phylink-don-t-start-and-stop-SGMII-PHYs-in-SFP-m.patch
@@ -0,0 +1,141 @@
+From b8803113537a1c1f457eba6270d46e3af305031f Mon Sep 17 00:00:00 2001
+From: Arseny Solokha <asolokha@kb.kras.ru>
+Date: Wed, 24 Jul 2019 20:31:39 +0700
+Subject: [PATCH 613/660] net: phylink: don't start and stop SGMII PHYs in SFP
+ modules twice
+
+SFP modules connected using the SGMII interface have their own PHYs which
+are handled by the struct phylink's phydev field. On the other hand, for
+the modules connected using 1000Base-X interface that field is not set.
+
+Since commit ce0aa27ff3f6 ("sfp: add sfp-bus to bridge between network
+devices and sfp cages") phylink_start() ends up setting the phydev field
+using the sfp-bus infrastructure, which eventually calls phy_start() on it,
+and then calling phy_start() again on the same phydev from phylink_start()
+itself. Similar call sequence holds for phylink_stop(), only in the reverse
+order. This results in WARNs during network interface bringup and shutdown
+when a copper SFP module is connected, as phy_start() and phy_stop() are
+called twice in a row for the same phy_device:
+
+  % ip link set up dev eth0
+  ------------[ cut here ]------------
+  called from state UP
+  WARNING: CPU: 1 PID: 155 at drivers/net/phy/phy.c:895 phy_start+0x74/0xc0
+  Modules linked in:
+  CPU: 1 PID: 155 Comm: backend Not tainted 5.2.0+ #1
+  NIP:  c0227bf0 LR: c0227bf0 CTR: c004d224
+  REGS: df547720 TRAP: 0700   Not tainted  (5.2.0+)
+  MSR:  00029000 <CE,EE,ME>  CR: 24002822  XER: 00000000
+
+  GPR00: c0227bf0 df5477d8 df5d7080 00000014 df9d2370 df9d5ac4 1f4eb000 00000001
+  GPR08: c061fe58 00000000 00000000 df5477d8 0000003c 100c8768 00000000 00000000
+  GPR16: df486a00 c046f1c8 c046eea0 00000000 c046e904 c0239604 db68449c 00000000
+  GPR24: e9083204 00000000 00000001 db684460 e9083404 00000000 db6dce00 db6dcc00
+  NIP [c0227bf0] phy_start+0x74/0xc0
+  LR [c0227bf0] phy_start+0x74/0xc0
+  Call Trace:
+  [df5477d8] [c0227bf0] phy_start+0x74/0xc0 (unreliable)
+  [df5477e8] [c023cad0] startup_gfar+0x398/0x3f4
+  [df547828] [c023cf08] gfar_enet_open+0x364/0x374
+  [df547898] [c029d870] __dev_open+0xe4/0x140
+  [df5478c8] [c029db70] __dev_change_flags+0xf0/0x188
+  [df5478f8] [c029dc28] dev_change_flags+0x20/0x54
+  [df547918] [c02ae304] do_setlink+0x310/0x818
+  [df547a08] [c02b1eb8] __rtnl_newlink+0x384/0x6b0
+  [df547c28] [c02b222c] rtnl_newlink+0x48/0x68
+  [df547c48] [c02ad7c8] rtnetlink_rcv_msg+0x240/0x27c
+  [df547c98] [c02cc068] netlink_rcv_skb+0x8c/0xf0
+  [df547cd8] [c02cba3c] netlink_unicast+0x114/0x19c
+  [df547d08] [c02cbd74] netlink_sendmsg+0x2b0/0x2c0
+  [df547d58] [c027b668] sock_sendmsg_nosec+0x20/0x40
+  [df547d68] [c027d080] ___sys_sendmsg+0x17c/0x1dc
+  [df547e98] [c027df7c] __sys_sendmsg+0x68/0x84
+  [df547ef8] [c027e430] sys_socketcall+0x1a0/0x204
+  [df547f38] [c000d1d8] ret_from_syscall+0x0/0x38
+  --- interrupt: c01 at 0xfd4e030
+      LR = 0xfd4e010
+  Instruction dump:
+  813f0188 38800000 2b890005 419d0014 3d40c046 5529103a 394aa208 7c8a482e
+  3c60c046 3863a1b8 4cc63182 4be009a1 <0fe00000> 48000030 3c60c046 3863a1d0
+  ---[ end trace d4c095aeaf6ea998 ]---
+
+and
+
+  % ip link set down dev eth0
+  ------------[ cut here ]------------
+  called from state HALTED
+  WARNING: CPU: 1 PID: 184 at drivers/net/phy/phy.c:858 phy_stop+0x3c/0x88
+
+  <...>
+
+  Call Trace:
+  [df581788] [c0228450] phy_stop+0x3c/0x88 (unreliable)
+  [df581798] [c022d548] sfp_sm_phy_detach+0x1c/0x44
+  [df5817a8] [c022e8cc] sfp_sm_event+0x4b0/0x87c
+  [df581848] [c022f04c] sfp_upstream_stop+0x34/0x44
+  [df581858] [c0225608] phylink_stop+0x7c/0xe4
+  [df581868] [c023c57c] stop_gfar+0x7c/0x94
+  [df581888] [c023c5b8] gfar_close+0x24/0x94
+  [df5818a8] [c0298688] __dev_close_many+0xdc/0xf8
+  [df5818c8] [c029db58] __dev_change_flags+0xd8/0x188
+  [df5818f8] [c029dc28] dev_change_flags+0x20/0x54
+  [df581918] [c02ae304] do_setlink+0x310/0x818
+  [df581a08] [c02b1eb8] __rtnl_newlink+0x384/0x6b0
+  [df581c28] [c02b222c] rtnl_newlink+0x48/0x68
+  [df581c48] [c02ad7c8] rtnetlink_rcv_msg+0x240/0x27c
+  [df581c98] [c02cc068] netlink_rcv_skb+0x8c/0xf0
+  [df581cd8] [c02cba3c] netlink_unicast+0x114/0x19c
+  [df581d08] [c02cbd74] netlink_sendmsg+0x2b0/0x2c0
+  [df581d58] [c027b668] sock_sendmsg_nosec+0x20/0x40
+  [df581d68] [c027d080] ___sys_sendmsg+0x17c/0x1dc
+  [df581e98] [c027df7c] __sys_sendmsg+0x68/0x84
+  [df581ef8] [c027e430] sys_socketcall+0x1a0/0x204
+  [df581f38] [c000d1d8] ret_from_syscall+0x0/0x38
+
+  <...>
+
+  ---[ end trace d4c095aeaf6ea999 ]---
+
+SFP modules with the 1000Base-X interface are not affected.
+
+Place explicit calls to phy_start() and phy_stop() before enabling or after
+disabling an attached SFP module, where phydev is not yet set (or is
+already unset), so they will be made only from the inside of sfp-bus, if
+needed.
+
+Fixes: 217962615662 ("net: phy: warn if phy_start is called from invalid state")
+Signed-off-by: Arseny Solokha <asolokha@kb.kras.ru>
+Acked-by: Russell King <rmk+kernel@armlinux.org.uk>
+Signed-off-by: David S. Miller <davem@davemloft.net>
+---
+ drivers/net/phy/phylink.c | 8 ++++----
+ 1 file changed, 4 insertions(+), 4 deletions(-)
+
+--- a/drivers/net/phy/phylink.c
++++ b/drivers/net/phy/phylink.c
+@@ -973,10 +973,10 @@ void phylink_start(struct phylink *pl)
+ 	}
+ 	if (pl->link_an_mode == MLO_AN_FIXED && pl->get_fixed_state)
+ 		mod_timer(&pl->link_poll, jiffies + HZ);
+-	if (pl->sfp_bus)
+-		sfp_upstream_start(pl->sfp_bus);
+ 	if (pl->phydev)
+ 		phy_start(pl->phydev);
++	if (pl->sfp_bus)
++		sfp_upstream_start(pl->sfp_bus);
+ }
+ EXPORT_SYMBOL_GPL(phylink_start);
+ 
+@@ -993,10 +993,10 @@ void phylink_stop(struct phylink *pl)
+ {
+ 	ASSERT_RTNL();
+ 
+-	if (pl->phydev)
+-		phy_stop(pl->phydev);
+ 	if (pl->sfp_bus)
+ 		sfp_upstream_stop(pl->sfp_bus);
++	if (pl->phydev)
++		phy_stop(pl->phydev);
+ 	del_timer_sync(&pl->link_poll);
+ 	if (pl->link_irq) {
+ 		free_irq(pl->link_irq, pl);
diff --git a/target/linux/generic/backport-5.4/716-v5.4-net-sfp-move-fwnode-parsing-into-sfp-bus-layer.patch b/target/linux/generic/backport-5.4/716-v5.4-net-sfp-move-fwnode-parsing-into-sfp-bus-layer.patch
new file mode 100644
index 0000000000..27ab78f3ee
--- /dev/null
+++ b/target/linux/generic/backport-5.4/716-v5.4-net-sfp-move-fwnode-parsing-into-sfp-bus-layer.patch
@@ -0,0 +1,179 @@
+From 4054955f0da08c81d42220cb445820d474f1ac92 Mon Sep 17 00:00:00 2001
+From: Russell King <rmk+kernel@armlinux.org.uk>
+Date: Sat, 14 Sep 2019 14:21:22 +0100
+Subject: [PATCH 614/660] net: sfp: move fwnode parsing into sfp-bus layer
+
+Rather than parsing the sfp firmware node in phylink, parse it in the
+sfp-bus code, so we can re-use this code for PHYs without having to
+duplicate the parsing.
+
+Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
+---
+ drivers/net/phy/phylink.c | 21 ++++---------
+ drivers/net/phy/sfp-bus.c | 65 +++++++++++++++++++++++++--------------
+ include/linux/sfp.h       | 10 +++---
+ 3 files changed, 53 insertions(+), 43 deletions(-)
+
+--- a/drivers/net/phy/phylink.c
++++ b/drivers/net/phy/phylink.c
+@@ -538,26 +538,17 @@ static const struct sfp_upstream_ops sfp
+ static int phylink_register_sfp(struct phylink *pl,
+ 				struct fwnode_handle *fwnode)
+ {
+-	struct fwnode_reference_args ref;
++	struct sfp_bus *bus;
+ 	int ret;
+ 
+-	if (!fwnode)
+-		return 0;
+-
+-	ret = fwnode_property_get_reference_args(fwnode, "sfp", NULL,
+-						 0, 0, &ref);
+-	if (ret < 0) {
+-		if (ret == -ENOENT)
+-			return 0;
+-
+-		netdev_err(pl->netdev, "unable to parse \"sfp\" node: %d\n",
+-			   ret);
++	bus = sfp_register_upstream_node(fwnode, pl, &sfp_phylink_ops);
++	if (IS_ERR(bus)) {
++		ret = PTR_ERR(bus);
++		netdev_err(pl->netdev, "unable to attach SFP bus: %d\n", ret);
+ 		return ret;
+ 	}
+ 
+-	pl->sfp_bus = sfp_register_upstream(ref.fwnode, pl, &sfp_phylink_ops);
+-	if (!pl->sfp_bus)
+-		return -ENOMEM;
++	pl->sfp_bus = bus;
+ 
+ 	return 0;
+ }
+--- a/drivers/net/phy/sfp-bus.c
++++ b/drivers/net/phy/sfp-bus.c
+@@ -3,6 +3,7 @@
+ #include <linux/list.h>
+ #include <linux/mutex.h>
+ #include <linux/phylink.h>
++#include <linux/property.h>
+ #include <linux/rtnetlink.h>
+ #include <linux/slab.h>
+ 
+@@ -444,45 +445,63 @@ static void sfp_upstream_clear(struct sf
+ }
+ 
+ /**
+- * sfp_register_upstream() - Register the neighbouring device
+- * @fwnode: firmware node for the SFP bus
++ * sfp_register_upstream_node() - parse and register the neighbouring device
++ * @fwnode: firmware node for the parent device (MAC or PHY)
+  * @upstream: the upstream private data
+  * @ops: the upstream's &struct sfp_upstream_ops
+  *
+- * Register the upstream device (eg, PHY) with the SFP bus. MAC drivers
+- * should use phylink, which will call this function for them. Returns
+- * a pointer to the allocated &struct sfp_bus.
++ * Parse the parent device's firmware node for a SFP bus, and register the
++ * SFP bus using sfp_register_upstream().
+  *
+- * On error, returns %NULL.
++ * Returns: on success, a pointer to the sfp_bus structure,
++ *	    %NULL if no SFP is specified,
++ * 	    on failure, an error pointer value:
++ * 		corresponding to the errors detailed for
++ * 		fwnode_property_get_reference_args().
++ * 	        %-ENOMEM if we failed to allocate the bus.
++ *		an error from the upstream's connect_phy() method.
+  */
+-struct sfp_bus *sfp_register_upstream(struct fwnode_handle *fwnode,
+-				      void *upstream,
+-				      const struct sfp_upstream_ops *ops)
+-{
+-	struct sfp_bus *bus = sfp_bus_get(fwnode);
+-	int ret = 0;
+-
+-	if (bus) {
+-		rtnl_lock();
+-		bus->upstream_ops = ops;
+-		bus->upstream = upstream;
++struct sfp_bus *sfp_register_upstream_node(struct fwnode_handle *fwnode,
++					   void *upstream,
++					   const struct sfp_upstream_ops *ops)
++{
++	struct fwnode_reference_args ref;
++	struct sfp_bus *bus;
++	int ret;
+ 
+-		if (bus->sfp) {
+-			ret = sfp_register_bus(bus);
+-			if (ret)
+-				sfp_upstream_clear(bus);
+-		}
+-		rtnl_unlock();
++	ret = fwnode_property_get_reference_args(fwnode, "sfp", NULL,
++						 0, 0, &ref);
++	if (ret == -ENOENT)
++		return NULL;
++	else if (ret < 0)
++		return ERR_PTR(ret);
++
++	bus = sfp_bus_get(ref.fwnode);
++	fwnode_handle_put(ref.fwnode);
++	if (!bus)
++		return ERR_PTR(-ENOMEM);
++
++	rtnl_lock();
++	bus->upstream_ops = ops;
++	bus->upstream = upstream;
++
++	if (bus->sfp) {
++		ret = sfp_register_bus(bus);
++		if (ret)
++			sfp_upstream_clear(bus);
++	} else {
++		ret = 0;
+ 	}
++	rtnl_unlock();
+ 
+ 	if (ret) {
+ 		sfp_bus_put(bus);
+-		bus = NULL;
++		bus = ERR_PTR(ret);
+ 	}
+ 
+ 	return bus;
+ }
+-EXPORT_SYMBOL_GPL(sfp_register_upstream);
++EXPORT_SYMBOL_GPL(sfp_register_upstream_node);
+ 
+ /**
+  * sfp_unregister_upstream() - Unregister sfp bus
+--- a/include/linux/sfp.h
++++ b/include/linux/sfp.h
+@@ -508,9 +508,9 @@ int sfp_get_module_eeprom(struct sfp_bus
+ 			  u8 *data);
+ void sfp_upstream_start(struct sfp_bus *bus);
+ void sfp_upstream_stop(struct sfp_bus *bus);
+-struct sfp_bus *sfp_register_upstream(struct fwnode_handle *fwnode,
+-				      void *upstream,
+-				      const struct sfp_upstream_ops *ops);
++struct sfp_bus *sfp_register_upstream_node(struct fwnode_handle *fwnode,
++					   void *upstream,
++					   const struct sfp_upstream_ops *ops);
+ void sfp_unregister_upstream(struct sfp_bus *bus);
+ #else
+ static inline int sfp_parse_port(struct sfp_bus *bus,
+@@ -553,11 +553,11 @@ static inline void sfp_upstream_stop(str
+ {
+ }
+ 
+-static inline struct sfp_bus *sfp_register_upstream(
++static inline struct sfp_bus *sfp_register_upstream_node(
+ 	struct fwnode_handle *fwnode, void *upstream,
+ 	const struct sfp_upstream_ops *ops)
+ {
+-	return (struct sfp_bus *)-1;
++	return NULL;
+ }
+ 
+ static inline void sfp_unregister_upstream(struct sfp_bus *bus)
diff --git a/target/linux/generic/backport-5.4/717-v5.5-net-sfp-rework-upstream-interface.patch b/target/linux/generic/backport-5.4/717-v5.5-net-sfp-rework-upstream-interface.patch
new file mode 100644
index 0000000000..f7dd187c16
--- /dev/null
+++ b/target/linux/generic/backport-5.4/717-v5.5-net-sfp-rework-upstream-interface.patch
@@ -0,0 +1,254 @@
+From 863b5b6941f9f43b924393b6ba2b36647e7dee42 Mon Sep 17 00:00:00 2001
+From: Russell King <rmk+kernel@armlinux.org.uk>
+Date: Thu, 7 Nov 2019 17:06:08 +0000
+Subject: [PATCH 615/660] net: sfp: rework upstream interface
+
+The current upstream interface is an all-or-nothing, which is
+sub-optimal for future changes, as it doesn't allow the upstream driver
+to prepare for the SFP module becoming available, as it is at boot.
+
+Switch to a find-sfp-bus, add-upstream, del-upstream, put-sfp-bus
+interface structure instead, which allows the upstream driver to
+prepare for a module being available as soon as add-upstream is called.
+
+Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
+---
+ drivers/net/phy/phylink.c | 10 +++--
+ drivers/net/phy/sfp-bus.c | 92 +++++++++++++++++++++++++++------------
+ include/linux/sfp.h       | 25 +++++++----
+ 3 files changed, 88 insertions(+), 39 deletions(-)
+
+--- a/drivers/net/phy/phylink.c
++++ b/drivers/net/phy/phylink.c
+@@ -541,7 +541,7 @@ static int phylink_register_sfp(struct p
+ 	struct sfp_bus *bus;
+ 	int ret;
+ 
+-	bus = sfp_register_upstream_node(fwnode, pl, &sfp_phylink_ops);
++	bus = sfp_bus_find_fwnode(fwnode);
+ 	if (IS_ERR(bus)) {
+ 		ret = PTR_ERR(bus);
+ 		netdev_err(pl->netdev, "unable to attach SFP bus: %d\n", ret);
+@@ -550,7 +550,10 @@ static int phylink_register_sfp(struct p
+ 
+ 	pl->sfp_bus = bus;
+ 
+-	return 0;
++	ret = sfp_bus_add_upstream(bus, pl, &sfp_phylink_ops);
++	sfp_bus_put(bus);
++
++	return ret;
+ }
+ 
+ /**
+@@ -634,8 +637,7 @@ EXPORT_SYMBOL_GPL(phylink_create);
+  */
+ void phylink_destroy(struct phylink *pl)
+ {
+-	if (pl->sfp_bus)
+-		sfp_unregister_upstream(pl->sfp_bus);
++	sfp_bus_del_upstream(pl->sfp_bus);
+ 	if (pl->link_gpio)
+ 		gpiod_put(pl->link_gpio);
+ 
+--- a/drivers/net/phy/sfp-bus.c
++++ b/drivers/net/phy/sfp-bus.c
+@@ -328,10 +328,19 @@ static void sfp_bus_release(struct kref
+ 	kfree(bus);
+ }
+ 
+-static void sfp_bus_put(struct sfp_bus *bus)
++/**
++ * sfp_bus_put() - put a reference on the &struct sfp_bus
++ * bus: the &struct sfp_bus found via sfp_bus_find_fwnode()
++ *
++ * Put a reference on the &struct sfp_bus and free the underlying structure
++ * if this was the last reference.
++ */
++void sfp_bus_put(struct sfp_bus *bus)
+ {
+-	kref_put_mutex(&bus->kref, sfp_bus_release, &sfp_mutex);
++	if (bus)
++		kref_put_mutex(&bus->kref, sfp_bus_release, &sfp_mutex);
+ }
++EXPORT_SYMBOL_GPL(sfp_bus_put);
+ 
+ static int sfp_register_bus(struct sfp_bus *bus)
+ {
+@@ -347,11 +356,11 @@ static int sfp_register_bus(struct sfp_b
+ 				return ret;
+ 		}
+ 	}
++	bus->registered = true;
+ 	bus->socket_ops->attach(bus->sfp);
+ 	if (bus->started)
+ 		bus->socket_ops->start(bus->sfp);
+ 	bus->upstream_ops->attach(bus->upstream, bus);
+-	bus->registered = true;
+ 	return 0;
+ }
+ 
+@@ -445,13 +454,12 @@ static void sfp_upstream_clear(struct sf
+ }
+ 
+ /**
+- * sfp_register_upstream_node() - parse and register the neighbouring device
++ * sfp_bus_find_fwnode() - parse and locate the SFP bus from fwnode
+  * @fwnode: firmware node for the parent device (MAC or PHY)
+- * @upstream: the upstream private data
+- * @ops: the upstream's &struct sfp_upstream_ops
+  *
+- * Parse the parent device's firmware node for a SFP bus, and register the
+- * SFP bus using sfp_register_upstream().
++ * Parse the parent device's firmware node for a SFP bus, and locate
++ * the sfp_bus structure, incrementing its reference count.  This must
++ * be put via sfp_bus_put() when done.
+  *
+  * Returns: on success, a pointer to the sfp_bus structure,
+  *	    %NULL if no SFP is specified,
+@@ -461,9 +469,7 @@ static void sfp_upstream_clear(struct sf
+  * 	        %-ENOMEM if we failed to allocate the bus.
+  *		an error from the upstream's connect_phy() method.
+  */
+-struct sfp_bus *sfp_register_upstream_node(struct fwnode_handle *fwnode,
+-					   void *upstream,
+-					   const struct sfp_upstream_ops *ops)
++struct sfp_bus *sfp_bus_find_fwnode(struct fwnode_handle *fwnode)
+ {
+ 	struct fwnode_reference_args ref;
+ 	struct sfp_bus *bus;
+@@ -481,7 +487,39 @@ struct sfp_bus *sfp_register_upstream_no
+ 	if (!bus)
+ 		return ERR_PTR(-ENOMEM);
+ 
++	return bus;
++}
++EXPORT_SYMBOL_GPL(sfp_bus_find_fwnode);
++
++/**
++ * sfp_bus_add_upstream() - parse and register the neighbouring device
++ * @bus: the &struct sfp_bus found via sfp_bus_find_fwnode()
++ * @upstream: the upstream private data
++ * @ops: the upstream's &struct sfp_upstream_ops
++ *
++ * Add upstream driver for the SFP bus, and if the bus is complete, register
++ * the SFP bus using sfp_register_upstream().  This takes a reference on the
++ * bus, so it is safe to put the bus after this call.
++ *
++ * Returns: on success, a pointer to the sfp_bus structure,
++ *	    %NULL if no SFP is specified,
++ * 	    on failure, an error pointer value:
++ * 		corresponding to the errors detailed for
++ * 		fwnode_property_get_reference_args().
++ * 	        %-ENOMEM if we failed to allocate the bus.
++ *		an error from the upstream's connect_phy() method.
++ */
++int sfp_bus_add_upstream(struct sfp_bus *bus, void *upstream,
++			 const struct sfp_upstream_ops *ops)
++{
++	int ret;
++
++	/* If no bus, return success */
++	if (!bus)
++		return 0;
++
+ 	rtnl_lock();
++	kref_get(&bus->kref);
+ 	bus->upstream_ops = ops;
+ 	bus->upstream = upstream;
+ 
+@@ -494,33 +532,33 @@ struct sfp_bus *sfp_register_upstream_no
+ 	}
+ 	rtnl_unlock();
+ 
+-	if (ret) {
++	if (ret)
+ 		sfp_bus_put(bus);
+-		bus = ERR_PTR(ret);
+-	}
+ 
+-	return bus;
++	return ret;
+ }
+-EXPORT_SYMBOL_GPL(sfp_register_upstream_node);
++EXPORT_SYMBOL_GPL(sfp_bus_add_upstream);
+ 
+ /**
+- * sfp_unregister_upstream() - Unregister sfp bus
++ * sfp_bus_del_upstream() - Delete a sfp bus
+  * @bus: a pointer to the &struct sfp_bus structure for the sfp module
+  *
+- * Unregister a previously registered upstream connection for the SFP
+- * module. @bus is returned from sfp_register_upstream().
++ * Delete a previously registered upstream connection for the SFP
++ * module. @bus should have been added by sfp_bus_add_upstream().
+  */
+-void sfp_unregister_upstream(struct sfp_bus *bus)
++void sfp_bus_del_upstream(struct sfp_bus *bus)
+ {
+-	rtnl_lock();
+-	if (bus->sfp)
+-		sfp_unregister_bus(bus);
+-	sfp_upstream_clear(bus);
+-	rtnl_unlock();
++	if (bus) {
++		rtnl_lock();
++		if (bus->sfp)
++			sfp_unregister_bus(bus);
++		sfp_upstream_clear(bus);
++		rtnl_unlock();
+ 
+-	sfp_bus_put(bus);
++		sfp_bus_put(bus);
++	}
+ }
+-EXPORT_SYMBOL_GPL(sfp_unregister_upstream);
++EXPORT_SYMBOL_GPL(sfp_bus_del_upstream);
+ 
+ /* Socket driver entry points */
+ int sfp_add_phy(struct sfp_bus *bus, struct phy_device *phydev)
+--- a/include/linux/sfp.h
++++ b/include/linux/sfp.h
+@@ -508,10 +508,11 @@ int sfp_get_module_eeprom(struct sfp_bus
+ 			  u8 *data);
+ void sfp_upstream_start(struct sfp_bus *bus);
+ void sfp_upstream_stop(struct sfp_bus *bus);
+-struct sfp_bus *sfp_register_upstream_node(struct fwnode_handle *fwnode,
+-					   void *upstream,
+-					   const struct sfp_upstream_ops *ops);
+-void sfp_unregister_upstream(struct sfp_bus *bus);
++void sfp_bus_put(struct sfp_bus *bus);
++struct sfp_bus *sfp_bus_find_fwnode(struct fwnode_handle *fwnode);
++int sfp_bus_add_upstream(struct sfp_bus *bus, void *upstream,
++			 const struct sfp_upstream_ops *ops);
++void sfp_bus_del_upstream(struct sfp_bus *bus);
+ #else
+ static inline int sfp_parse_port(struct sfp_bus *bus,
+ 				 const struct sfp_eeprom_id *id,
+@@ -553,14 +554,22 @@ static inline void sfp_upstream_stop(str
+ {
+ }
+ 
+-static inline struct sfp_bus *sfp_register_upstream_node(
+-	struct fwnode_handle *fwnode, void *upstream,
+-	const struct sfp_upstream_ops *ops)
++static inline void sfp_bus_put(struct sfp_bus *bus)
++{
++}
++
++static inline struct sfp_bus *sfp_bus_find_fwnode(struct fwnode_handle *fwnode)
+ {
+ 	return NULL;
+ }
+ 
+-static inline void sfp_unregister_upstream(struct sfp_bus *bus)
++static int sfp_bus_add_upstream(struct sfp_bus *bus, void *upstream,
++				const struct sfp_upstream_ops *ops)
++{
++	return 0;
++}
++
++static inline void sfp_bus_del_upstream(struct sfp_bus *bus)
+ {
+ }
+ #endif
diff --git a/target/linux/generic/backport-5.4/718-v5.5-net-sfp-fix-sfp_bus_put-kernel-documentation.patch b/target/linux/generic/backport-5.4/718-v5.5-net-sfp-fix-sfp_bus_put-kernel-documentation.patch
new file mode 100644
index 0000000000..59d2ce588c
--- /dev/null
+++ b/target/linux/generic/backport-5.4/718-v5.5-net-sfp-fix-sfp_bus_put-kernel-documentation.patch
@@ -0,0 +1,27 @@
+From ea7bfd81921827d334c2a23bd11ef0e4e2abafd2 Mon Sep 17 00:00:00 2001
+From: Russell King <rmk+kernel@armlinux.org.uk>
+Date: Sat, 9 Nov 2019 08:13:50 +0000
+Subject: [PATCH 616/660] net: sfp: fix sfp_bus_put() kernel documentation
+
+The kbuild test robot found a problem with htmldocs with the recent
+change to the SFP interfaces.  Fix the kernel documentation for
+sfp_bus_put() which was missing an '@' before the argument name
+description.
+
+Fixes: 727b3668b730 ("net: sfp: rework upstream interface")
+Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
+---
+ drivers/net/phy/sfp-bus.c | 2 +-
+ 1 file changed, 1 insertion(+), 1 deletion(-)
+
+--- a/drivers/net/phy/sfp-bus.c
++++ b/drivers/net/phy/sfp-bus.c
+@@ -330,7 +330,7 @@ static void sfp_bus_release(struct kref
+ 
+ /**
+  * sfp_bus_put() - put a reference on the &struct sfp_bus
+- * bus: the &struct sfp_bus found via sfp_bus_find_fwnode()
++ * @bus: the &struct sfp_bus found via sfp_bus_find_fwnode()
+  *
+  * Put a reference on the &struct sfp_bus and free the underlying structure
+  * if this was the last reference.
diff --git a/target/linux/generic/backport-5.4/719-v5.5-net-sfp-fix-sfp_bus_add_upstream-warning.patch b/target/linux/generic/backport-5.4/719-v5.5-net-sfp-fix-sfp_bus_add_upstream-warning.patch
new file mode 100644
index 0000000000..9528049e1b
--- /dev/null
+++ b/target/linux/generic/backport-5.4/719-v5.5-net-sfp-fix-sfp_bus_add_upstream-warning.patch
@@ -0,0 +1,27 @@
+From f76d84cd85f8bd3f083495f7ca723822cba8abc9 Mon Sep 17 00:00:00 2001
+From: Russell King <rmk+kernel@armlinux.org.uk>
+Date: Mon, 11 Nov 2019 10:23:35 +0000
+Subject: [PATCH 617/660] net: sfp: fix sfp_bus_add_upstream() warning
+
+When building with SFP disabled, the stub for sfp_bus_add_upstream()
+missed "inline".  Add it.
+
+Fixes: 727b3668b730 ("net: sfp: rework upstream interface")
+Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
+---
+ include/linux/sfp.h | 4 ++--
+ 1 file changed, 2 insertions(+), 2 deletions(-)
+
+--- a/include/linux/sfp.h
++++ b/include/linux/sfp.h
+@@ -563,8 +563,8 @@ static inline struct sfp_bus *sfp_bus_fi
+ 	return NULL;
+ }
+ 
+-static int sfp_bus_add_upstream(struct sfp_bus *bus, void *upstream,
+-				const struct sfp_upstream_ops *ops)
++static inline int sfp_bus_add_upstream(struct sfp_bus *bus, void *upstream,
++				       const struct sfp_upstream_ops *ops)
+ {
+ 	return 0;
+ }
diff --git a/target/linux/generic/backport-5.4/720-v5.5-net-sfp-move-sfp-sub-state-machines-into-separate-fu.patch b/target/linux/generic/backport-5.4/720-v5.5-net-sfp-move-sfp-sub-state-machines-into-separate-fu.patch
new file mode 100644
index 0000000000..2f90b00438
--- /dev/null
+++ b/target/linux/generic/backport-5.4/720-v5.5-net-sfp-move-sfp-sub-state-machines-into-separate-fu.patch
@@ -0,0 +1,124 @@
+From b9d6ed5cdb67533feda7f221eb06f2f9f1ff5047 Mon Sep 17 00:00:00 2001
+From: Russell King <rmk+kernel@armlinux.org.uk>
+Date: Fri, 11 Oct 2019 19:33:58 +0100
+Subject: [PATCH 618/660] net: sfp: move sfp sub-state machines into separate
+ functions
+
+Move the SFP sub-state machines out of the main state machine function,
+in preparation for it doing a bit more with the device state.  By doing
+so, we ensure that our debug after the main state machine is always
+printed.
+
+Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
+---
+ drivers/net/phy/sfp.c | 74 +++++++++++++++++++++++++------------------
+ 1 file changed, 43 insertions(+), 31 deletions(-)
+
+--- a/drivers/net/phy/sfp.c
++++ b/drivers/net/phy/sfp.c
+@@ -1479,19 +1479,34 @@ static void sfp_sm_mod_remove(struct sfp
+ 	dev_info(sfp->dev, "module removed\n");
+ }
+ 
+-static void sfp_sm_event(struct sfp *sfp, unsigned int event)
++/* This state machine tracks the netdev up/down state */
++static void sfp_sm_device(struct sfp *sfp, unsigned int event)
+ {
+-	mutex_lock(&sfp->sm_mutex);
++	switch (sfp->sm_dev_state) {
++	default:
++		if (event == SFP_E_DEV_UP)
++			sfp->sm_dev_state = SFP_DEV_UP;
++		break;
+ 
+-	dev_dbg(sfp->dev, "SM: enter %s:%s:%s event %s\n",
+-		mod_state_to_str(sfp->sm_mod_state),
+-		dev_state_to_str(sfp->sm_dev_state),
+-		sm_state_to_str(sfp->sm_state),
+-		event_to_str(event));
++	case SFP_DEV_UP:
++		if (event == SFP_E_DEV_DOWN) {
++			/* If the module has a PHY, avoid raising TX disable
++			 * as this resets the PHY. Otherwise, raise it to
++			 * turn the laser off.
++			 */
++			if (!sfp->mod_phy)
++				sfp_module_tx_disable(sfp);
++			sfp->sm_dev_state = SFP_DEV_DOWN;
++		}
++		break;
++	}
++}
+ 
+-	/* This state machine tracks the insert/remove state of
+-	 * the module, and handles probing the on-board EEPROM.
+-	 */
++/* This state machine tracks the insert/remove state of
++ * the module, and handles probing the on-board EEPROM.
++ */
++static void sfp_sm_module(struct sfp *sfp, unsigned int event)
++{
+ 	switch (sfp->sm_mod_state) {
+ 	default:
+ 		if (event == SFP_E_INSERT && sfp->attached) {
+@@ -1531,27 +1546,10 @@ static void sfp_sm_event(struct sfp *sfp
+ 		}
+ 		break;
+ 	}
++}
+ 
+-	/* This state machine tracks the netdev up/down state */
+-	switch (sfp->sm_dev_state) {
+-	default:
+-		if (event == SFP_E_DEV_UP)
+-			sfp->sm_dev_state = SFP_DEV_UP;
+-		break;
+-
+-	case SFP_DEV_UP:
+-		if (event == SFP_E_DEV_DOWN) {
+-			/* If the module has a PHY, avoid raising TX disable
+-			 * as this resets the PHY. Otherwise, raise it to
+-			 * turn the laser off.
+-			 */
+-			if (!sfp->mod_phy)
+-				sfp_module_tx_disable(sfp);
+-			sfp->sm_dev_state = SFP_DEV_DOWN;
+-		}
+-		break;
+-	}
+-
++static void sfp_sm_main(struct sfp *sfp, unsigned int event)
++{
+ 	/* Some events are global */
+ 	if (sfp->sm_state != SFP_S_DOWN &&
+ 	    (sfp->sm_mod_state != SFP_MOD_PRESENT ||
+@@ -1562,7 +1560,6 @@ static void sfp_sm_event(struct sfp *sfp
+ 		if (sfp->mod_phy)
+ 			sfp_sm_phy_detach(sfp);
+ 		sfp_sm_next(sfp, SFP_S_DOWN, 0);
+-		mutex_unlock(&sfp->sm_mutex);
+ 		return;
+ 	}
+ 
+@@ -1617,6 +1614,21 @@ static void sfp_sm_event(struct sfp *sfp
+ 	case SFP_S_TX_DISABLE:
+ 		break;
+ 	}
++}
++
++static void sfp_sm_event(struct sfp *sfp, unsigned int event)
++{
++	mutex_lock(&sfp->sm_mutex);
++
++	dev_dbg(sfp->dev, "SM: enter %s:%s:%s event %s\n",
++		mod_state_to_str(sfp->sm_mod_state),
++		dev_state_to_str(sfp->sm_dev_state),
++		sm_state_to_str(sfp->sm_state),
++		event_to_str(event));
++
++	sfp_sm_module(sfp, event);
++	sfp_sm_device(sfp, event);
++	sfp_sm_main(sfp, event);
+ 
+ 	dev_dbg(sfp->dev, "SM: exit %s:%s:%s\n",
+ 		mod_state_to_str(sfp->sm_mod_state),
diff --git a/target/linux/generic/backport-5.4/721-v5.5-net-sfp-move-tx-disable-on-device-down-to-main-state.patch b/target/linux/generic/backport-5.4/721-v5.5-net-sfp-move-tx-disable-on-device-down-to-main-state.patch
new file mode 100644
index 0000000000..5b3caaf0fd
--- /dev/null
+++ b/target/linux/generic/backport-5.4/721-v5.5-net-sfp-move-tx-disable-on-device-down-to-main-state.patch
@@ -0,0 +1,41 @@
+From 7e89b737c97a9e7a81dd1584000bc136b92f12fd Mon Sep 17 00:00:00 2001
+From: Russell King <rmk+kernel@armlinux.org.uk>
+Date: Fri, 11 Oct 2019 22:14:47 +0100
+Subject: [PATCH 619/660] net: sfp: move tx disable on device down to main
+ state machine
+
+Move the tx disable assertion on device down to the main state
+machine.
+
+Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
+---
+ drivers/net/phy/sfp.c | 10 ++--------
+ 1 file changed, 2 insertions(+), 8 deletions(-)
+
+--- a/drivers/net/phy/sfp.c
++++ b/drivers/net/phy/sfp.c
+@@ -1489,15 +1489,8 @@ static void sfp_sm_device(struct sfp *sf
+ 		break;
+ 
+ 	case SFP_DEV_UP:
+-		if (event == SFP_E_DEV_DOWN) {
+-			/* If the module has a PHY, avoid raising TX disable
+-			 * as this resets the PHY. Otherwise, raise it to
+-			 * turn the laser off.
+-			 */
+-			if (!sfp->mod_phy)
+-				sfp_module_tx_disable(sfp);
++		if (event == SFP_E_DEV_DOWN)
+ 			sfp->sm_dev_state = SFP_DEV_DOWN;
+-		}
+ 		break;
+ 	}
+ }
+@@ -1559,6 +1552,7 @@ static void sfp_sm_main(struct sfp *sfp,
+ 			sfp_sm_link_down(sfp);
+ 		if (sfp->mod_phy)
+ 			sfp_sm_phy_detach(sfp);
++		sfp_module_tx_disable(sfp);
+ 		sfp_sm_next(sfp, SFP_S_DOWN, 0);
+ 		return;
+ 	}
diff --git a/target/linux/generic/backport-5.4/722-v5.5-net-sfp-rename-sfp_sm_ins_next-as-sfp_sm_mod_next.patch b/target/linux/generic/backport-5.4/722-v5.5-net-sfp-rename-sfp_sm_ins_next-as-sfp_sm_mod_next.patch
new file mode 100644
index 0000000000..ed84e76fdf
--- /dev/null
+++ b/target/linux/generic/backport-5.4/722-v5.5-net-sfp-rename-sfp_sm_ins_next-as-sfp_sm_mod_next.patch
@@ -0,0 +1,71 @@
+From f2a1ccfc4ad4f97c98c3cc18eb32992151ce089a Mon Sep 17 00:00:00 2001
+From: Russell King <rmk+kernel@armlinux.org.uk>
+Date: Fri, 11 Oct 2019 22:27:21 +0100
+Subject: [PATCH 620/660] net: sfp: rename sfp_sm_ins_next() as
+ sfp_sm_mod_next()
+
+sfp_sm_ins_next() modifies the module state machine.  Change it's name
+to reflect this.
+
+Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
+---
+ drivers/net/phy/sfp.c | 16 ++++++++--------
+ 1 file changed, 8 insertions(+), 8 deletions(-)
+
+--- a/drivers/net/phy/sfp.c
++++ b/drivers/net/phy/sfp.c
+@@ -1180,7 +1180,7 @@ static void sfp_sm_next(struct sfp *sfp,
+ 	sfp_sm_set_timer(sfp, timeout);
+ }
+ 
+-static void sfp_sm_ins_next(struct sfp *sfp, unsigned int state,
++static void sfp_sm_mod_next(struct sfp *sfp, unsigned int state,
+ 			    unsigned int timeout)
+ {
+ 	sfp->sm_mod_state = state;
+@@ -1504,22 +1504,22 @@ static void sfp_sm_module(struct sfp *sf
+ 	default:
+ 		if (event == SFP_E_INSERT && sfp->attached) {
+ 			sfp_module_tx_disable(sfp);
+-			sfp_sm_ins_next(sfp, SFP_MOD_PROBE, T_PROBE_INIT);
++			sfp_sm_mod_next(sfp, SFP_MOD_PROBE, T_PROBE_INIT);
+ 		}
+ 		break;
+ 
+ 	case SFP_MOD_PROBE:
+ 		if (event == SFP_E_REMOVE) {
+-			sfp_sm_ins_next(sfp, SFP_MOD_EMPTY, 0);
++			sfp_sm_mod_next(sfp, SFP_MOD_EMPTY, 0);
+ 		} else if (event == SFP_E_TIMEOUT) {
+ 			int val = sfp_sm_mod_probe(sfp);
+ 
+ 			if (val == 0)
+-				sfp_sm_ins_next(sfp, SFP_MOD_PRESENT, 0);
++				sfp_sm_mod_next(sfp, SFP_MOD_PRESENT, 0);
+ 			else if (val > 0)
+-				sfp_sm_ins_next(sfp, SFP_MOD_HPOWER, val);
++				sfp_sm_mod_next(sfp, SFP_MOD_HPOWER, val);
+ 			else if (val != -EAGAIN)
+-				sfp_sm_ins_next(sfp, SFP_MOD_ERROR, 0);
++				sfp_sm_mod_next(sfp, SFP_MOD_ERROR, 0);
+ 			else
+ 				sfp_sm_set_timer(sfp, T_PROBE_RETRY);
+ 		}
+@@ -1527,7 +1527,7 @@ static void sfp_sm_module(struct sfp *sf
+ 
+ 	case SFP_MOD_HPOWER:
+ 		if (event == SFP_E_TIMEOUT) {
+-			sfp_sm_ins_next(sfp, SFP_MOD_PRESENT, 0);
++			sfp_sm_mod_next(sfp, SFP_MOD_PRESENT, 0);
+ 			break;
+ 		}
+ 		/* fallthrough */
+@@ -1535,7 +1535,7 @@ static void sfp_sm_module(struct sfp *sf
+ 	case SFP_MOD_ERROR:
+ 		if (event == SFP_E_REMOVE) {
+ 			sfp_sm_mod_remove(sfp);
+-			sfp_sm_ins_next(sfp, SFP_MOD_EMPTY, 0);
++			sfp_sm_mod_next(sfp, SFP_MOD_EMPTY, 0);
+ 		}
+ 		break;
+ 	}
diff --git a/target/linux/generic/backport-5.4/723-v5.5-net-sfp-handle-module-remove-outside-state-machine.patch b/target/linux/generic/backport-5.4/723-v5.5-net-sfp-handle-module-remove-outside-state-machine.patch
new file mode 100644
index 0000000000..542aeaea77
--- /dev/null
+++ b/target/linux/generic/backport-5.4/723-v5.5-net-sfp-handle-module-remove-outside-state-machine.patch
@@ -0,0 +1,53 @@
+From d2591ea5520e2ee8fa557f96bb64c23cafac4b20 Mon Sep 17 00:00:00 2001
+From: Russell King <rmk+kernel@armlinux.org.uk>
+Date: Tue, 15 Oct 2019 10:33:13 +0100
+Subject: [PATCH 621/660] net: sfp: handle module remove outside state machine
+
+Removing a module resets the module state machine back to its initial
+state.  Rather than explicitly handling this in every state, handle it
+early on outside of the state machine.
+
+Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
+---
+ drivers/net/phy/sfp.c | 16 +++++++++-------
+ 1 file changed, 9 insertions(+), 7 deletions(-)
+
+--- a/drivers/net/phy/sfp.c
++++ b/drivers/net/phy/sfp.c
+@@ -1500,6 +1500,14 @@ static void sfp_sm_device(struct sfp *sf
+  */
+ static void sfp_sm_module(struct sfp *sfp, unsigned int event)
+ {
++	/* Handle remove event globally, it resets this state machine */
++	if (event == SFP_E_REMOVE) {
++		if (sfp->sm_mod_state > SFP_MOD_PROBE)
++			sfp_sm_mod_remove(sfp);
++		sfp_sm_mod_next(sfp, SFP_MOD_EMPTY, 0);
++		return;
++	}
++
+ 	switch (sfp->sm_mod_state) {
+ 	default:
+ 		if (event == SFP_E_INSERT && sfp->attached) {
+@@ -1509,9 +1517,7 @@ static void sfp_sm_module(struct sfp *sf
+ 		break;
+ 
+ 	case SFP_MOD_PROBE:
+-		if (event == SFP_E_REMOVE) {
+-			sfp_sm_mod_next(sfp, SFP_MOD_EMPTY, 0);
+-		} else if (event == SFP_E_TIMEOUT) {
++		if (event == SFP_E_TIMEOUT) {
+ 			int val = sfp_sm_mod_probe(sfp);
+ 
+ 			if (val == 0)
+@@ -1533,10 +1539,6 @@ static void sfp_sm_module(struct sfp *sf
+ 		/* fallthrough */
+ 	case SFP_MOD_PRESENT:
+ 	case SFP_MOD_ERROR:
+-		if (event == SFP_E_REMOVE) {
+-			sfp_sm_mod_remove(sfp);
+-			sfp_sm_mod_next(sfp, SFP_MOD_EMPTY, 0);
+-		}
+ 		break;
+ 	}
+ }
diff --git a/target/linux/generic/backport-5.4/724-v5.5-net-sfp-rename-T_PROBE_WAIT-to-T_SERIAL.patch b/target/linux/generic/backport-5.4/724-v5.5-net-sfp-rename-T_PROBE_WAIT-to-T_SERIAL.patch
new file mode 100644
index 0000000000..e0c35feea3
--- /dev/null
+++ b/target/linux/generic/backport-5.4/724-v5.5-net-sfp-rename-T_PROBE_WAIT-to-T_SERIAL.patch
@@ -0,0 +1,51 @@
+From 615090acb3c0b41691f3a03522ea38350387c0e4 Mon Sep 17 00:00:00 2001
+From: Russell King <rmk+kernel@armlinux.org.uk>
+Date: Tue, 15 Oct 2019 10:54:15 +0100
+Subject: [PATCH 622/660] net: sfp: rename T_PROBE_WAIT to T_SERIAL
+
+SFF-8472 rev 12.2 defines the time for the serial bus to become ready
+using t_serial.  Use this as our identifier for this timeout to make
+it clear what we are referring to.
+
+Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
+---
+ drivers/net/phy/sfp.c | 13 ++++++-------
+ 1 file changed, 6 insertions(+), 7 deletions(-)
+
+--- a/drivers/net/phy/sfp.c
++++ b/drivers/net/phy/sfp.c
+@@ -147,11 +147,10 @@ static const enum gpiod_flags gpio_flags
+  * the same length on the PCB, which means it's possible for MOD DEF 0 to
+  * connect before the I2C bus on MOD DEF 1/2.
+  *
+- * The SFP MSA specifies 300ms as t_init (the time taken for TX_FAULT to
+- * be deasserted) but makes no mention of the earliest time before we can
+- * access the I2C EEPROM.  However, Avago modules require 300ms.
++ * The SFF-8472 specifies t_serial ("Time from power on until module is
++ * ready for data transmission over the two wire serial bus.") as 300ms.
+  */
+-#define T_PROBE_INIT	msecs_to_jiffies(300)
++#define T_SERIAL	msecs_to_jiffies(300)
+ #define T_HPOWER_LEVEL	msecs_to_jiffies(300)
+ #define T_PROBE_RETRY	msecs_to_jiffies(100)
+ 
+@@ -1495,8 +1494,8 @@ static void sfp_sm_device(struct sfp *sf
+ 	}
+ }
+ 
+-/* This state machine tracks the insert/remove state of
+- * the module, and handles probing the on-board EEPROM.
++/* This state machine tracks the insert/remove state of the module, probes
++ * the on-board EEPROM, and sets up the power level.
+  */
+ static void sfp_sm_module(struct sfp *sfp, unsigned int event)
+ {
+@@ -1512,7 +1511,7 @@ static void sfp_sm_module(struct sfp *sf
+ 	default:
+ 		if (event == SFP_E_INSERT && sfp->attached) {
+ 			sfp_module_tx_disable(sfp);
+-			sfp_sm_mod_next(sfp, SFP_MOD_PROBE, T_PROBE_INIT);
++			sfp_sm_mod_next(sfp, SFP_MOD_PROBE, T_SERIAL);
+ 		}
+ 		break;
+ 
diff --git a/target/linux/generic/backport-5.4/725-v5.5-net-sfp-parse-SFP-power-requirement-earlier.patch b/target/linux/generic/backport-5.4/725-v5.5-net-sfp-parse-SFP-power-requirement-earlier.patch
new file mode 100644
index 0000000000..0b358f86d2
--- /dev/null
+++ b/target/linux/generic/backport-5.4/725-v5.5-net-sfp-parse-SFP-power-requirement-earlier.patch
@@ -0,0 +1,115 @@
+From d4b8746219e8c0361e5ed6e440ab3a8a600d1f76 Mon Sep 17 00:00:00 2001
+From: Russell King <rmk+kernel@armlinux.org.uk>
+Date: Fri, 11 Oct 2019 17:24:40 +0100
+Subject: [PATCH 623/660] net: sfp: parse SFP power requirement earlier
+
+Parse the SFP power requirement earlier, in preparation for moving the
+power level setup code.
+
+Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
+---
+ drivers/net/phy/sfp.c | 42 +++++++++++++++++++++++++++++-------------
+ 1 file changed, 29 insertions(+), 13 deletions(-)
+
+--- a/drivers/net/phy/sfp.c
++++ b/drivers/net/phy/sfp.c
+@@ -196,6 +196,8 @@ struct sfp {
+ 	unsigned int sm_retries;
+ 
+ 	struct sfp_eeprom_id id;
++	unsigned int module_power_mW;
++
+ #if IS_ENABLED(CONFIG_HWMON)
+ 	struct sfp_diag diag;
+ 	struct device *hwmon_dev;
+@@ -1309,17 +1311,14 @@ static void sfp_sm_mod_init(struct sfp *
+ 		sfp_sm_probe_phy(sfp);
+ }
+ 
+-static int sfp_sm_mod_hpower(struct sfp *sfp)
++static int sfp_module_parse_power(struct sfp *sfp)
+ {
+-	u32 power;
+-	u8 val;
+-	int err;
++	u32 power_mW = 1000;
+ 
+-	power = 1000;
+ 	if (sfp->id.ext.options & cpu_to_be16(SFP_OPTIONS_POWER_DECL))
+-		power = 1500;
++		power_mW = 1500;
+ 	if (sfp->id.ext.options & cpu_to_be16(SFP_OPTIONS_HIGH_POWER_LEVEL))
+-		power = 2000;
++		power_mW = 2000;
+ 
+ 	if (sfp->id.ext.sff8472_compliance == SFP_SFF8472_COMPLIANCE_NONE &&
+ 	    (sfp->id.ext.diagmon & (SFP_DIAGMON_DDM | SFP_DIAGMON_ADDRMODE)) !=
+@@ -1328,23 +1327,33 @@ static int sfp_sm_mod_hpower(struct sfp
+ 		 * or requires an address change sequence, so assume that
+ 		 * the module powers up in the indicated power mode.
+ 		 */
+-		if (power > sfp->max_power_mW) {
++		if (power_mW > sfp->max_power_mW) {
+ 			dev_err(sfp->dev,
+ 				"Host does not support %u.%uW modules\n",
+-				power / 1000, (power / 100) % 10);
++				power_mW / 1000, (power_mW / 100) % 10);
+ 			return -EINVAL;
+ 		}
+ 		return 0;
+ 	}
+ 
+-	if (power > sfp->max_power_mW) {
++	if (power_mW > sfp->max_power_mW) {
+ 		dev_warn(sfp->dev,
+ 			 "Host does not support %u.%uW modules, module left in power mode 1\n",
+-			 power / 1000, (power / 100) % 10);
++			 power_mW / 1000, (power_mW / 100) % 10);
+ 		return 0;
+ 	}
+ 
+-	if (power <= 1000)
++	sfp->module_power_mW = power_mW;
++
++	return 0;
++}
++
++static int sfp_sm_mod_hpower(struct sfp *sfp)
++{
++	u8 val;
++	int err;
++
++	if (sfp->module_power_mW <= 1000)
+ 		return 0;
+ 
+ 	err = sfp_read(sfp, true, SFP_EXT_STATUS, &val, sizeof(val));
+@@ -1364,7 +1373,8 @@ static int sfp_sm_mod_hpower(struct sfp
+ 	}
+ 
+ 	dev_info(sfp->dev, "Module switched to %u.%uW power level\n",
+-		 power / 1000, (power / 100) % 10);
++		 sfp->module_power_mW / 1000,
++		 (sfp->module_power_mW / 100) % 10);
+ 	return T_HPOWER_LEVEL;
+ 
+ err:
+@@ -1451,6 +1461,11 @@ static int sfp_sm_mod_probe(struct sfp *
+ 		dev_warn(sfp->dev,
+ 			 "module address swap to access page 0xA2 is not supported.\n");
+ 
++	/* Parse the module power requirement */
++	ret = sfp_module_parse_power(sfp);
++	if (ret < 0)
++		return ret;
++
+ 	ret = sfp_hwmon_insert(sfp);
+ 	if (ret < 0)
+ 		return ret;
+@@ -1474,6 +1489,7 @@ static void sfp_sm_mod_remove(struct sfp
+ 	sfp_module_tx_disable(sfp);
+ 
+ 	memset(&sfp->id, 0, sizeof(sfp->id));
++	sfp->module_power_mW = 0;
+ 
+ 	dev_info(sfp->dev, "module removed\n");
+ }
diff --git a/target/linux/generic/backport-5.4/726-v5.5-net-sfp-avoid-power-switch-on-address-change-modules.patch b/target/linux/generic/backport-5.4/726-v5.5-net-sfp-avoid-power-switch-on-address-change-modules.patch
new file mode 100644
index 0000000000..2ddd4c4d02
--- /dev/null
+++ b/target/linux/generic/backport-5.4/726-v5.5-net-sfp-avoid-power-switch-on-address-change-modules.patch
@@ -0,0 +1,65 @@
+From dca678b8838945572cf50584cb33a7199c1fd397 Mon Sep 17 00:00:00 2001
+From: Russell King <rmk+kernel@armlinux.org.uk>
+Date: Thu, 17 Oct 2019 00:24:18 +0100
+Subject: [PATCH 624/660] net: sfp: avoid power switch on address-change
+ modules
+
+If the module indicates that it requires an address change sequence to
+switch between address 0x50 and 0x51, which we don't support, we can't
+write to the register that controls the power mode to switch to high
+power mode.  Warn the user that the module may not be functional in
+this case, and don't try to change the power mode.
+
+Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
+---
+ drivers/net/phy/sfp.c | 31 ++++++++++++++++++++-----------
+ 1 file changed, 20 insertions(+), 11 deletions(-)
+
+--- a/drivers/net/phy/sfp.c
++++ b/drivers/net/phy/sfp.c
+@@ -1320,25 +1320,34 @@ static int sfp_module_parse_power(struct
+ 	if (sfp->id.ext.options & cpu_to_be16(SFP_OPTIONS_HIGH_POWER_LEVEL))
+ 		power_mW = 2000;
+ 
+-	if (sfp->id.ext.sff8472_compliance == SFP_SFF8472_COMPLIANCE_NONE &&
+-	    (sfp->id.ext.diagmon & (SFP_DIAGMON_DDM | SFP_DIAGMON_ADDRMODE)) !=
+-	    SFP_DIAGMON_DDM) {
+-		/* The module appears not to implement bus address 0xa2,
+-		 * or requires an address change sequence, so assume that
+-		 * the module powers up in the indicated power mode.
+-		 */
+-		if (power_mW > sfp->max_power_mW) {
++	if (power_mW > sfp->max_power_mW) {
++		/* Module power specification exceeds the allowed maximum. */
++		if (sfp->id.ext.sff8472_compliance ==
++			SFP_SFF8472_COMPLIANCE_NONE &&
++		    !(sfp->id.ext.diagmon & SFP_DIAGMON_DDM)) {
++			/* The module appears not to implement bus address
++			 * 0xa2, so assume that the module powers up in the
++			 * indicated mode.
++			 */
+ 			dev_err(sfp->dev,
+ 				"Host does not support %u.%uW modules\n",
+ 				power_mW / 1000, (power_mW / 100) % 10);
+ 			return -EINVAL;
++		} else {
++			dev_warn(sfp->dev,
++				 "Host does not support %u.%uW modules, module left in power mode 1\n",
++				 power_mW / 1000, (power_mW / 100) % 10);
++			return 0;
+ 		}
+-		return 0;
+ 	}
+ 
+-	if (power_mW > sfp->max_power_mW) {
++	/* If the module requires a higher power mode, but also requires
++	 * an address change sequence, warn the user that the module may
++	 * not be functional.
++	 */
++	if (sfp->id.ext.diagmon & SFP_DIAGMON_ADDRMODE && power_mW > 1000) {
+ 		dev_warn(sfp->dev,
+-			 "Host does not support %u.%uW modules, module left in power mode 1\n",
++			 "Address Change Sequence not supported but module requies %u.%uW, module may not be functional\n",
+ 			 power_mW / 1000, (power_mW / 100) % 10);
+ 		return 0;
+ 	}
diff --git a/target/linux/generic/backport-5.4/727-v5.5-net-sfp-control-TX_DISABLE-and-phy-only-from-main-st.patch b/target/linux/generic/backport-5.4/727-v5.5-net-sfp-control-TX_DISABLE-and-phy-only-from-main-st.patch
new file mode 100644
index 0000000000..0eac6abb88
--- /dev/null
+++ b/target/linux/generic/backport-5.4/727-v5.5-net-sfp-control-TX_DISABLE-and-phy-only-from-main-st.patch
@@ -0,0 +1,52 @@
+From df5c4d93c5a59cba0f7479a4cd4e22b50726ce88 Mon Sep 17 00:00:00 2001
+From: Russell King <rmk+kernel@armlinux.org.uk>
+Date: Thu, 17 Oct 2019 11:12:42 +0100
+Subject: [PATCH 625/660] net: sfp: control TX_DISABLE and phy only from main
+ state machine
+
+We initialise TX_DISABLE when the sfp cage is probed, and then
+maintain its state in the main state machine.  However, the module
+state machine:
+- negates it when detecting a newly inserted module when it's already
+  guaranteed to be negated.
+- negates it when the module is removed, but the main state machine
+  will do this anyway.
+
+Make TX_DISABLE entirely controlled by the main state machine.
+
+The main state machine also probes the module for a PHY, and removes
+the PHY when the the module is removed.  Hence, removing the PHY in
+sfp_sm_module_remove() is also redundant, and is a left-over from
+when we tried to probe for the PHY from the module state machine.
+
+Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
+---
+ drivers/net/phy/sfp.c | 9 +--------
+ 1 file changed, 1 insertion(+), 8 deletions(-)
+
+--- a/drivers/net/phy/sfp.c
++++ b/drivers/net/phy/sfp.c
+@@ -1492,11 +1492,6 @@ static void sfp_sm_mod_remove(struct sfp
+ 
+ 	sfp_hwmon_remove(sfp);
+ 
+-	if (sfp->mod_phy)
+-		sfp_sm_phy_detach(sfp);
+-
+-	sfp_module_tx_disable(sfp);
+-
+ 	memset(&sfp->id, 0, sizeof(sfp->id));
+ 	sfp->module_power_mW = 0;
+ 
+@@ -1534,10 +1529,8 @@ static void sfp_sm_module(struct sfp *sf
+ 
+ 	switch (sfp->sm_mod_state) {
+ 	default:
+-		if (event == SFP_E_INSERT && sfp->attached) {
+-			sfp_module_tx_disable(sfp);
++		if (event == SFP_E_INSERT && sfp->attached)
+ 			sfp_sm_mod_next(sfp, SFP_MOD_PROBE, T_SERIAL);
+-		}
+ 		break;
+ 
+ 	case SFP_MOD_PROBE:
diff --git a/target/linux/generic/backport-5.4/728-v5.5-net-sfp-split-the-PHY-probe-from-sfp_sm_mod_init.patch b/target/linux/generic/backport-5.4/728-v5.5-net-sfp-split-the-PHY-probe-from-sfp_sm_mod_init.patch
new file mode 100644
index 0000000000..7830b9268f
--- /dev/null
+++ b/target/linux/generic/backport-5.4/728-v5.5-net-sfp-split-the-PHY-probe-from-sfp_sm_mod_init.patch
@@ -0,0 +1,53 @@
+From 5ed0bd49b2d3ac4439c2d7f44e5a82b7cf6f409a Mon Sep 17 00:00:00 2001
+From: Russell King <rmk+kernel@armlinux.org.uk>
+Date: Fri, 18 Oct 2019 10:09:02 +0100
+Subject: [PATCH 626/660] net: sfp: split the PHY probe from sfp_sm_mod_init()
+
+Move the PHY probe into a separate function, splitting it from
+sfp_sm_mod_init().  This will allow us to eliminate the 50ms mdelay()
+inside the state machine.
+
+Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
+---
+ drivers/net/phy/sfp.c | 21 +++++++++++++--------
+ 1 file changed, 13 insertions(+), 8 deletions(-)
+
+--- a/drivers/net/phy/sfp.c
++++ b/drivers/net/phy/sfp.c
+@@ -1288,14 +1288,10 @@ static void sfp_sm_fault(struct sfp *sfp
+ static void sfp_sm_mod_init(struct sfp *sfp)
+ {
+ 	sfp_module_tx_enable(sfp);
++}
+ 
+-	/* Wait t_init before indicating that the link is up, provided the
+-	 * current state indicates no TX_FAULT.  If TX_FAULT clears before
+-	 * this time, that's fine too.
+-	 */
+-	sfp_sm_next(sfp, SFP_S_INIT, T_INIT_JIFFIES);
+-	sfp->sm_retries = 5;
+-
++static void sfp_sm_probe_for_phy(struct sfp *sfp)
++{
+ 	/* Setting the serdes link mode is guesswork: there's no
+ 	 * field in the EEPROM which indicates what mode should
+ 	 * be used.
+@@ -1580,8 +1576,17 @@ static void sfp_sm_main(struct sfp *sfp,
+ 	switch (sfp->sm_state) {
+ 	case SFP_S_DOWN:
+ 		if (sfp->sm_mod_state == SFP_MOD_PRESENT &&
+-		    sfp->sm_dev_state == SFP_DEV_UP)
++		    sfp->sm_dev_state == SFP_DEV_UP) {
+ 			sfp_sm_mod_init(sfp);
++			sfp_sm_probe_for_phy(sfp);
++
++			/* Wait t_init before indicating that the link is up,
++			 * provided the current state indicates no TX_FAULT. If
++			 * TX_FAULT clears before this time, that's fine too.
++			 */
++			sfp_sm_next(sfp, SFP_S_INIT, T_INIT_JIFFIES);
++			sfp->sm_retries = 5;
++		}
+ 		break;
+ 
+ 	case SFP_S_INIT:
diff --git a/target/linux/generic/backport-5.4/729-v5.5-net-sfp-eliminate-mdelay-from-PHY-probe.patch b/target/linux/generic/backport-5.4/729-v5.5-net-sfp-eliminate-mdelay-from-PHY-probe.patch
new file mode 100644
index 0000000000..5dc92bd10e
--- /dev/null
+++ b/target/linux/generic/backport-5.4/729-v5.5-net-sfp-eliminate-mdelay-from-PHY-probe.patch
@@ -0,0 +1,130 @@
+From 0fe72afaa31f98ebd71bd6683fc47021105d0157 Mon Sep 17 00:00:00 2001
+From: Russell King <rmk+kernel@armlinux.org.uk>
+Date: Fri, 18 Oct 2019 10:21:46 +0100
+Subject: [PATCH 627/660] net: sfp: eliminate mdelay() from PHY probe
+
+Rather than using mdelay() to wait before probing the PHY (which holds
+several locks, including the rtnl lock), add an extra wait state to
+the state machine to introduce the 50ms delay without holding any
+locks.
+
+Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
+---
+ drivers/net/phy/sfp.c | 52 +++++++++++++++++++++++++++++++++----------
+ 1 file changed, 40 insertions(+), 12 deletions(-)
+
+--- a/drivers/net/phy/sfp.c
++++ b/drivers/net/phy/sfp.c
+@@ -52,6 +52,7 @@ enum {
+ 	SFP_DEV_UP,
+ 
+ 	SFP_S_DOWN = 0,
++	SFP_S_WAIT,
+ 	SFP_S_INIT,
+ 	SFP_S_WAIT_LOS,
+ 	SFP_S_LINK_UP,
+@@ -108,6 +109,7 @@ static const char *event_to_str(unsigned
+ 
+ static const char * const sm_state_strings[] = {
+ 	[SFP_S_DOWN] = "down",
++	[SFP_S_WAIT] = "wait",
+ 	[SFP_S_INIT] = "init",
+ 	[SFP_S_WAIT_LOS] = "wait_los",
+ 	[SFP_S_LINK_UP] = "link_up",
+@@ -139,6 +141,7 @@ static const enum gpiod_flags gpio_flags
+ 	GPIOD_ASIS,
+ };
+ 
++#define T_WAIT		msecs_to_jiffies(50)
+ #define T_INIT_JIFFIES	msecs_to_jiffies(300)
+ #define T_RESET_US	10
+ #define T_FAULT_RECOVER	msecs_to_jiffies(1000)
+@@ -159,9 +162,6 @@ static const enum gpiod_flags gpio_flags
+  */
+ #define SFP_PHY_ADDR	22
+ 
+-/* Give this long for the PHY to reset. */
+-#define T_PHY_RESET_MS	50
+-
+ struct sff_data {
+ 	unsigned int gpios;
+ 	bool (*module_supported)(const struct sfp_eeprom_id *id);
+@@ -1202,8 +1202,6 @@ static void sfp_sm_probe_phy(struct sfp
+ 	struct phy_device *phy;
+ 	int err;
+ 
+-	msleep(T_PHY_RESET_MS);
+-
+ 	phy = mdiobus_scan(sfp->i2c_mii, SFP_PHY_ADDR);
+ 	if (phy == ERR_PTR(-ENODEV)) {
+ 		dev_info(sfp->dev, "no PHY detected\n");
+@@ -1558,6 +1556,8 @@ static void sfp_sm_module(struct sfp *sf
+ 
+ static void sfp_sm_main(struct sfp *sfp, unsigned int event)
+ {
++	unsigned long timeout;
++
+ 	/* Some events are global */
+ 	if (sfp->sm_state != SFP_S_DOWN &&
+ 	    (sfp->sm_mod_state != SFP_MOD_PRESENT ||
+@@ -1575,17 +1575,45 @@ static void sfp_sm_main(struct sfp *sfp,
+ 	/* The main state machine */
+ 	switch (sfp->sm_state) {
+ 	case SFP_S_DOWN:
+-		if (sfp->sm_mod_state == SFP_MOD_PRESENT &&
+-		    sfp->sm_dev_state == SFP_DEV_UP) {
+-			sfp_sm_mod_init(sfp);
+-			sfp_sm_probe_for_phy(sfp);
++		if (sfp->sm_mod_state != SFP_MOD_PRESENT ||
++		    sfp->sm_dev_state != SFP_DEV_UP)
++			break;
++
++		sfp_sm_mod_init(sfp);
++
++		/* Initialise the fault clearance retries */
++		sfp->sm_retries = 5;
++
++		/* We need to check the TX_FAULT state, which is not defined
++		 * while TX_DISABLE is asserted. The earliest we want to do
++		 * anything (such as probe for a PHY) is 50ms.
++		 */
++		sfp_sm_next(sfp, SFP_S_WAIT, T_WAIT);
++		break;
++
++	case SFP_S_WAIT:
++		if (event != SFP_E_TIMEOUT)
++			break;
++
++		sfp_sm_probe_for_phy(sfp);
+ 
++		if (sfp->state & SFP_F_TX_FAULT) {
+ 			/* Wait t_init before indicating that the link is up,
+ 			 * provided the current state indicates no TX_FAULT. If
+ 			 * TX_FAULT clears before this time, that's fine too.
+ 			 */
+-			sfp_sm_next(sfp, SFP_S_INIT, T_INIT_JIFFIES);
+-			sfp->sm_retries = 5;
++			timeout = T_INIT_JIFFIES;
++			if (timeout > T_WAIT)
++				timeout -= T_WAIT;
++			else
++				timeout = 1;
++
++			sfp_sm_next(sfp, SFP_S_INIT, timeout);
++		} else {
++			/* TX_FAULT is not asserted, assume the module has
++			 * finished initialising.
++			 */
++			goto init_done;
+ 		}
+ 		break;
+ 
+@@ -1593,7 +1621,7 @@ static void sfp_sm_main(struct sfp *sfp,
+ 		if (event == SFP_E_TIMEOUT && sfp->state & SFP_F_TX_FAULT)
+ 			sfp_sm_fault(sfp, true);
+ 		else if (event == SFP_E_TIMEOUT || event == SFP_E_TX_CLEAR)
+-			sfp_sm_link_check_los(sfp);
++	init_done:	sfp_sm_link_check_los(sfp);
+ 		break;
+ 
+ 	case SFP_S_WAIT_LOS:
diff --git a/target/linux/generic/backport-5.4/730-v5.5-net-sfp-allow-fault-processing-to-transition-to-othe.patch b/target/linux/generic/backport-5.4/730-v5.5-net-sfp-allow-fault-processing-to-transition-to-othe.patch
new file mode 100644
index 0000000000..6e34e6cc0f
--- /dev/null
+++ b/target/linux/generic/backport-5.4/730-v5.5-net-sfp-allow-fault-processing-to-transition-to-othe.patch
@@ -0,0 +1,69 @@
+From 2aa424ee7fbe43e2cd24e28c2f6388c4e1796bd2 Mon Sep 17 00:00:00 2001
+From: Russell King <rmk+kernel@armlinux.org.uk>
+Date: Fri, 18 Oct 2019 09:58:33 +0100
+Subject: [PATCH 628/660] net: sfp: allow fault processing to transition to
+ other states
+
+Add the next state to sfp_sm_fault() so that it can branch to other
+states. This will be necessary to improve the initialisation path.
+
+Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
+---
+ drivers/net/phy/sfp.c | 12 ++++++------
+ 1 file changed, 6 insertions(+), 6 deletions(-)
+
+--- a/drivers/net/phy/sfp.c
++++ b/drivers/net/phy/sfp.c
+@@ -1269,7 +1269,7 @@ static bool sfp_los_event_inactive(struc
+ 		event == SFP_E_LOS_LOW);
+ }
+ 
+-static void sfp_sm_fault(struct sfp *sfp, bool warn)
++static void sfp_sm_fault(struct sfp *sfp, unsigned int next_state, bool warn)
+ {
+ 	if (sfp->sm_retries && !--sfp->sm_retries) {
+ 		dev_err(sfp->dev,
+@@ -1279,7 +1279,7 @@ static void sfp_sm_fault(struct sfp *sfp
+ 		if (warn)
+ 			dev_err(sfp->dev, "module transmit fault indicated\n");
+ 
+-		sfp_sm_next(sfp, SFP_S_TX_FAULT, T_FAULT_RECOVER);
++		sfp_sm_next(sfp, next_state, T_FAULT_RECOVER);
+ 	}
+ }
+ 
+@@ -1619,14 +1619,14 @@ static void sfp_sm_main(struct sfp *sfp,
+ 
+ 	case SFP_S_INIT:
+ 		if (event == SFP_E_TIMEOUT && sfp->state & SFP_F_TX_FAULT)
+-			sfp_sm_fault(sfp, true);
++			sfp_sm_fault(sfp, SFP_S_TX_FAULT, true);
+ 		else if (event == SFP_E_TIMEOUT || event == SFP_E_TX_CLEAR)
+ 	init_done:	sfp_sm_link_check_los(sfp);
+ 		break;
+ 
+ 	case SFP_S_WAIT_LOS:
+ 		if (event == SFP_E_TX_FAULT)
+-			sfp_sm_fault(sfp, true);
++			sfp_sm_fault(sfp, SFP_S_TX_FAULT, true);
+ 		else if (sfp_los_event_inactive(sfp, event))
+ 			sfp_sm_link_up(sfp);
+ 		break;
+@@ -1634,7 +1634,7 @@ static void sfp_sm_main(struct sfp *sfp,
+ 	case SFP_S_LINK_UP:
+ 		if (event == SFP_E_TX_FAULT) {
+ 			sfp_sm_link_down(sfp);
+-			sfp_sm_fault(sfp, true);
++			sfp_sm_fault(sfp, SFP_S_TX_FAULT, true);
+ 		} else if (sfp_los_event_active(sfp, event)) {
+ 			sfp_sm_link_down(sfp);
+ 			sfp_sm_next(sfp, SFP_S_WAIT_LOS, 0);
+@@ -1650,7 +1650,7 @@ static void sfp_sm_main(struct sfp *sfp,
+ 
+ 	case SFP_S_REINIT:
+ 		if (event == SFP_E_TIMEOUT && sfp->state & SFP_F_TX_FAULT) {
+-			sfp_sm_fault(sfp, false);
++			sfp_sm_fault(sfp, SFP_S_TX_FAULT, false);
+ 		} else if (event == SFP_E_TIMEOUT || event == SFP_E_TX_CLEAR) {
+ 			dev_info(sfp->dev, "module transmit fault recovered\n");
+ 			sfp_sm_link_check_los(sfp);
diff --git a/target/linux/generic/backport-5.4/731-v5.5-net-sfp-ensure-TX_FAULT-has-deasserted-before-probin.patch b/target/linux/generic/backport-5.4/731-v5.5-net-sfp-ensure-TX_FAULT-has-deasserted-before-probin.patch
new file mode 100644
index 0000000000..03415fb6e7
--- /dev/null
+++ b/target/linux/generic/backport-5.4/731-v5.5-net-sfp-ensure-TX_FAULT-has-deasserted-before-probin.patch
@@ -0,0 +1,80 @@
+From 38b62a12231be4b86fc5ca5477579d29831c02a5 Mon Sep 17 00:00:00 2001
+From: Russell King <rmk+kernel@armlinux.org.uk>
+Date: Fri, 18 Oct 2019 10:31:07 +0100
+Subject: [PATCH 629/660] net: sfp: ensure TX_FAULT has deasserted before
+ probing the PHY
+
+TX_FAULT should be deasserted to indicate that the module has completed
+its initialisation.  This may include the on-board PHY, so wait until
+the module has deasserted TX_FAULT before probing the PHY.
+
+This means that we need an extra state to handle a TX_FAULT that
+remains set for longer than t_init, since using the existing handling
+state would bypass the PHY probe.
+
+Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
+---
+ drivers/net/phy/sfp.c | 31 +++++++++++++++++++++++++------
+ 1 file changed, 25 insertions(+), 6 deletions(-)
+
+--- a/drivers/net/phy/sfp.c
++++ b/drivers/net/phy/sfp.c
+@@ -54,6 +54,7 @@ enum {
+ 	SFP_S_DOWN = 0,
+ 	SFP_S_WAIT,
+ 	SFP_S_INIT,
++	SFP_S_INIT_TX_FAULT,
+ 	SFP_S_WAIT_LOS,
+ 	SFP_S_LINK_UP,
+ 	SFP_S_TX_FAULT,
+@@ -111,6 +112,7 @@ static const char * const sm_state_strin
+ 	[SFP_S_DOWN] = "down",
+ 	[SFP_S_WAIT] = "wait",
+ 	[SFP_S_INIT] = "init",
++	[SFP_S_INIT_TX_FAULT] = "init_tx_fault",
+ 	[SFP_S_WAIT_LOS] = "wait_los",
+ 	[SFP_S_LINK_UP] = "link_up",
+ 	[SFP_S_TX_FAULT] = "tx_fault",
+@@ -1595,8 +1597,6 @@ static void sfp_sm_main(struct sfp *sfp,
+ 		if (event != SFP_E_TIMEOUT)
+ 			break;
+ 
+-		sfp_sm_probe_for_phy(sfp);
+-
+ 		if (sfp->state & SFP_F_TX_FAULT) {
+ 			/* Wait t_init before indicating that the link is up,
+ 			 * provided the current state indicates no TX_FAULT. If
+@@ -1618,10 +1618,29 @@ static void sfp_sm_main(struct sfp *sfp,
+ 		break;
+ 
+ 	case SFP_S_INIT:
+-		if (event == SFP_E_TIMEOUT && sfp->state & SFP_F_TX_FAULT)
+-			sfp_sm_fault(sfp, SFP_S_TX_FAULT, true);
+-		else if (event == SFP_E_TIMEOUT || event == SFP_E_TX_CLEAR)
+-	init_done:	sfp_sm_link_check_los(sfp);
++		if (event == SFP_E_TIMEOUT && sfp->state & SFP_F_TX_FAULT) {
++			/* TX_FAULT is still asserted after t_init, so assume
++			 * there is a fault.
++			 */
++			sfp_sm_fault(sfp, SFP_S_INIT_TX_FAULT,
++				     sfp->sm_retries == 5);
++		} else if (event == SFP_E_TIMEOUT || event == SFP_E_TX_CLEAR) {
++	init_done:	/* TX_FAULT deasserted or we timed out with TX_FAULT
++			 * clear.  Probe for the PHY and check the LOS state.
++			 */
++			sfp_sm_probe_for_phy(sfp);
++			sfp_sm_link_check_los(sfp);
++
++			/* Reset the fault retry count */
++			sfp->sm_retries = 5;
++		}
++		break;
++
++	case SFP_S_INIT_TX_FAULT:
++		if (event == SFP_E_TIMEOUT) {
++			sfp_module_tx_fault_reset(sfp);
++			sfp_sm_next(sfp, SFP_S_INIT, T_INIT_JIFFIES);
++		}
+ 		break;
+ 
+ 	case SFP_S_WAIT_LOS:
diff --git a/target/linux/generic/backport-5.4/732-v5.5-net-sfp-track-upstream-s-attachment-state-in-state-m.patch b/target/linux/generic/backport-5.4/732-v5.5-net-sfp-track-upstream-s-attachment-state-in-state-m.patch
new file mode 100644
index 0000000000..5ee44dbf0c
--- /dev/null
+++ b/target/linux/generic/backport-5.4/732-v5.5-net-sfp-track-upstream-s-attachment-state-in-state-m.patch
@@ -0,0 +1,153 @@
+From ec6036a58f979c66bbd5cd9d0d1c783a98c2c644 Mon Sep 17 00:00:00 2001
+From: Russell King <rmk+kernel@armlinux.org.uk>
+Date: Tue, 5 Nov 2019 12:57:40 +0000
+Subject: [PATCH 630/660] net: sfp: track upstream's attachment state in state
+ machine
+
+Track the upstream's attachment state in the state machine rather than
+maintaining a boolean, which ensures that we have a strict order of
+ATTACH followed by an UP event - we can never believe that a newly
+attached upstream will be anything but down.
+
+Rearrange the order of state machines so we run the module state
+machine after the upstream device's state machine, so the module state
+machine can check the current state of the device and take action to
+e.g. reset back to empty state when the upstream is detached.
+
+This is to allow the module detection to run independently of the
+network device becoming available.
+
+Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
+---
+ drivers/net/phy/sfp.c | 42 +++++++++++++++++++++++++++++-------------
+ 1 file changed, 29 insertions(+), 13 deletions(-)
+
+--- a/drivers/net/phy/sfp.c
++++ b/drivers/net/phy/sfp.c
+@@ -34,6 +34,8 @@ enum {
+ 
+ 	SFP_E_INSERT = 0,
+ 	SFP_E_REMOVE,
++	SFP_E_DEV_ATTACH,
++	SFP_E_DEV_DETACH,
+ 	SFP_E_DEV_DOWN,
+ 	SFP_E_DEV_UP,
+ 	SFP_E_TX_FAULT,
+@@ -48,7 +50,8 @@ enum {
+ 	SFP_MOD_PRESENT,
+ 	SFP_MOD_ERROR,
+ 
+-	SFP_DEV_DOWN = 0,
++	SFP_DEV_DETACHED = 0,
++	SFP_DEV_DOWN,
+ 	SFP_DEV_UP,
+ 
+ 	SFP_S_DOWN = 0,
+@@ -78,6 +81,7 @@ static const char *mod_state_to_str(unsi
+ }
+ 
+ static const char * const dev_state_strings[] = {
++	[SFP_DEV_DETACHED] = "detached",
+ 	[SFP_DEV_DOWN] = "down",
+ 	[SFP_DEV_UP] = "up",
+ };
+@@ -92,6 +96,8 @@ static const char *dev_state_to_str(unsi
+ static const char * const event_strings[] = {
+ 	[SFP_E_INSERT] = "insert",
+ 	[SFP_E_REMOVE] = "remove",
++	[SFP_E_DEV_ATTACH] = "dev_attach",
++	[SFP_E_DEV_DETACH] = "dev_detach",
+ 	[SFP_E_DEV_DOWN] = "dev_down",
+ 	[SFP_E_DEV_UP] = "dev_up",
+ 	[SFP_E_TX_FAULT] = "tx_fault",
+@@ -186,7 +192,6 @@ struct sfp {
+ 	struct gpio_desc *gpio[GPIO_MAX];
+ 	int gpio_irq[GPIO_MAX];
+ 
+-	bool attached;
+ 	struct mutex st_mutex;			/* Protects state */
+ 	unsigned int state;
+ 	struct delayed_work poll;
+@@ -1494,17 +1499,26 @@ static void sfp_sm_mod_remove(struct sfp
+ 	dev_info(sfp->dev, "module removed\n");
+ }
+ 
+-/* This state machine tracks the netdev up/down state */
++/* This state machine tracks the upstream's state */
+ static void sfp_sm_device(struct sfp *sfp, unsigned int event)
+ {
+ 	switch (sfp->sm_dev_state) {
+ 	default:
+-		if (event == SFP_E_DEV_UP)
++		if (event == SFP_E_DEV_ATTACH)
++			sfp->sm_dev_state = SFP_DEV_DOWN;
++		break;
++
++	case SFP_DEV_DOWN:
++		if (event == SFP_E_DEV_DETACH)
++			sfp->sm_dev_state = SFP_DEV_DETACHED;
++		else if (event == SFP_E_DEV_UP)
+ 			sfp->sm_dev_state = SFP_DEV_UP;
+ 		break;
+ 
+ 	case SFP_DEV_UP:
+-		if (event == SFP_E_DEV_DOWN)
++		if (event == SFP_E_DEV_DETACH)
++			sfp->sm_dev_state = SFP_DEV_DETACHED;
++		else if (event == SFP_E_DEV_DOWN)
+ 			sfp->sm_dev_state = SFP_DEV_DOWN;
+ 		break;
+ 	}
+@@ -1515,17 +1529,20 @@ static void sfp_sm_device(struct sfp *sf
+  */
+ static void sfp_sm_module(struct sfp *sfp, unsigned int event)
+ {
+-	/* Handle remove event globally, it resets this state machine */
+-	if (event == SFP_E_REMOVE) {
++	/* Handle remove event globally, it resets this state machine.
++	 * Also deal with upstream detachment.
++	 */
++	if (event == SFP_E_REMOVE || sfp->sm_dev_state < SFP_DEV_DOWN) {
+ 		if (sfp->sm_mod_state > SFP_MOD_PROBE)
+ 			sfp_sm_mod_remove(sfp);
+-		sfp_sm_mod_next(sfp, SFP_MOD_EMPTY, 0);
++		if (sfp->sm_mod_state != SFP_MOD_EMPTY)
++			sfp_sm_mod_next(sfp, SFP_MOD_EMPTY, 0);
+ 		return;
+ 	}
+ 
+ 	switch (sfp->sm_mod_state) {
+ 	default:
+-		if (event == SFP_E_INSERT && sfp->attached)
++		if (event == SFP_E_INSERT)
+ 			sfp_sm_mod_next(sfp, SFP_MOD_PROBE, T_SERIAL);
+ 		break;
+ 
+@@ -1691,8 +1708,8 @@ static void sfp_sm_event(struct sfp *sfp
+ 		sm_state_to_str(sfp->sm_state),
+ 		event_to_str(event));
+ 
+-	sfp_sm_module(sfp, event);
+ 	sfp_sm_device(sfp, event);
++	sfp_sm_module(sfp, event);
+ 	sfp_sm_main(sfp, event);
+ 
+ 	dev_dbg(sfp->dev, "SM: exit %s:%s:%s\n",
+@@ -1705,15 +1722,14 @@ static void sfp_sm_event(struct sfp *sfp
+ 
+ static void sfp_attach(struct sfp *sfp)
+ {
+-	sfp->attached = true;
++	sfp_sm_event(sfp, SFP_E_DEV_ATTACH);
+ 	if (sfp->state & SFP_F_PRESENT)
+ 		sfp_sm_event(sfp, SFP_E_INSERT);
+ }
+ 
+ static void sfp_detach(struct sfp *sfp)
+ {
+-	sfp->attached = false;
+-	sfp_sm_event(sfp, SFP_E_REMOVE);
++	sfp_sm_event(sfp, SFP_E_DEV_DETACH);
+ }
+ 
+ static void sfp_start(struct sfp *sfp)
diff --git a/target/linux/generic/backport-5.4/733-v5.5-net-sfp-split-power-mode-switching-from-probe.patch b/target/linux/generic/backport-5.4/733-v5.5-net-sfp-split-power-mode-switching-from-probe.patch
new file mode 100644
index 0000000000..06b3cb5428
--- /dev/null
+++ b/target/linux/generic/backport-5.4/733-v5.5-net-sfp-split-power-mode-switching-from-probe.patch
@@ -0,0 +1,184 @@
+From fdff863a4ce3677907f64396e34c45025abb6600 Mon Sep 17 00:00:00 2001
+From: Russell King <rmk+kernel@armlinux.org.uk>
+Date: Tue, 5 Nov 2019 12:59:36 +0000
+Subject: [PATCH 631/660] net: sfp: split power mode switching from probe
+
+Switch the power mode switching from the probe, so that we don't
+repeatedly re-probe the SFP device if there is a problem accessing
+the registers at I2C address 0x51.
+
+In splitting this out, we can also fix a bug where we leave the module
+in high-power mode when the upstream device is detached but the module
+is still inserted.
+
+Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
+---
+ drivers/net/phy/sfp.c | 101 ++++++++++++++++++++++++++----------------
+ 1 file changed, 64 insertions(+), 37 deletions(-)
+
+--- a/drivers/net/phy/sfp.c
++++ b/drivers/net/phy/sfp.c
+@@ -47,6 +47,7 @@ enum {
+ 	SFP_MOD_EMPTY = 0,
+ 	SFP_MOD_PROBE,
+ 	SFP_MOD_HPOWER,
++	SFP_MOD_WAITPWR,
+ 	SFP_MOD_PRESENT,
+ 	SFP_MOD_ERROR,
+ 
+@@ -69,6 +70,7 @@ static const char  * const mod_state_str
+ 	[SFP_MOD_EMPTY] = "empty",
+ 	[SFP_MOD_PROBE] = "probe",
+ 	[SFP_MOD_HPOWER] = "hpower",
++	[SFP_MOD_WAITPWR] = "waitpwr",
+ 	[SFP_MOD_PRESENT] = "present",
+ 	[SFP_MOD_ERROR] = "error",
+ };
+@@ -1358,37 +1360,34 @@ static int sfp_module_parse_power(struct
+ 	return 0;
+ }
+ 
+-static int sfp_sm_mod_hpower(struct sfp *sfp)
++static int sfp_sm_mod_hpower(struct sfp *sfp, bool enable)
+ {
+ 	u8 val;
+ 	int err;
+ 
+-	if (sfp->module_power_mW <= 1000)
+-		return 0;
+-
+ 	err = sfp_read(sfp, true, SFP_EXT_STATUS, &val, sizeof(val));
+ 	if (err != sizeof(val)) {
+ 		dev_err(sfp->dev, "Failed to read EEPROM: %d\n", err);
+-		err = -EAGAIN;
+-		goto err;
++		return -EAGAIN;
+ 	}
+ 
+-	val |= BIT(0);
++	if (enable)
++		val |= BIT(0);
++	else
++		val &= ~BIT(0);
+ 
+ 	err = sfp_write(sfp, true, SFP_EXT_STATUS, &val, sizeof(val));
+ 	if (err != sizeof(val)) {
+ 		dev_err(sfp->dev, "Failed to write EEPROM: %d\n", err);
+-		err = -EAGAIN;
+-		goto err;
++		return -EAGAIN;
+ 	}
+ 
+-	dev_info(sfp->dev, "Module switched to %u.%uW power level\n",
+-		 sfp->module_power_mW / 1000,
+-		 (sfp->module_power_mW / 100) % 10);
+-	return T_HPOWER_LEVEL;
++	if (enable)
++		dev_info(sfp->dev, "Module switched to %u.%uW power level\n",
++			 sfp->module_power_mW / 1000,
++			 (sfp->module_power_mW / 100) % 10);
+ 
+-err:
+-	return err;
++	return 0;
+ }
+ 
+ static int sfp_sm_mod_probe(struct sfp *sfp)
+@@ -1484,7 +1483,7 @@ static int sfp_sm_mod_probe(struct sfp *
+ 	if (ret < 0)
+ 		return ret;
+ 
+-	return sfp_sm_mod_hpower(sfp);
++	return 0;
+ }
+ 
+ static void sfp_sm_mod_remove(struct sfp *sfp)
+@@ -1529,13 +1528,22 @@ static void sfp_sm_device(struct sfp *sf
+  */
+ static void sfp_sm_module(struct sfp *sfp, unsigned int event)
+ {
+-	/* Handle remove event globally, it resets this state machine.
+-	 * Also deal with upstream detachment.
+-	 */
+-	if (event == SFP_E_REMOVE || sfp->sm_dev_state < SFP_DEV_DOWN) {
++	int err;
++
++	/* Handle remove event globally, it resets this state machine */
++	if (event == SFP_E_REMOVE) {
+ 		if (sfp->sm_mod_state > SFP_MOD_PROBE)
+ 			sfp_sm_mod_remove(sfp);
+-		if (sfp->sm_mod_state != SFP_MOD_EMPTY)
++		sfp_sm_mod_next(sfp, SFP_MOD_EMPTY, 0);
++		return;
++	}
++
++	/* Handle device detach globally */
++	if (sfp->sm_dev_state < SFP_DEV_DOWN) {
++		if (sfp->module_power_mW > 1000 &&
++		    sfp->sm_mod_state > SFP_MOD_HPOWER)
++			sfp_sm_mod_hpower(sfp, false);
++		if (sfp->sm_mod_state > SFP_MOD_EMPTY)
+ 			sfp_sm_mod_next(sfp, SFP_MOD_EMPTY, 0);
+ 		return;
+ 	}
+@@ -1547,26 +1555,45 @@ static void sfp_sm_module(struct sfp *sf
+ 		break;
+ 
+ 	case SFP_MOD_PROBE:
+-		if (event == SFP_E_TIMEOUT) {
+-			int val = sfp_sm_mod_probe(sfp);
++		if (event != SFP_E_TIMEOUT)
++			break;
+ 
+-			if (val == 0)
+-				sfp_sm_mod_next(sfp, SFP_MOD_PRESENT, 0);
+-			else if (val > 0)
+-				sfp_sm_mod_next(sfp, SFP_MOD_HPOWER, val);
+-			else if (val != -EAGAIN)
+-				sfp_sm_mod_next(sfp, SFP_MOD_ERROR, 0);
+-			else
+-				sfp_sm_set_timer(sfp, T_PROBE_RETRY);
++		err = sfp_sm_mod_probe(sfp);
++		if (err == -EAGAIN) {
++			sfp_sm_set_timer(sfp, T_PROBE_RETRY);
++			break;
+ 		}
+-		break;
++		if (err < 0) {
++			sfp_sm_mod_next(sfp, SFP_MOD_ERROR, 0);
++			break;
++		}
++
++		/* If this is a power level 1 module, we are done */
++		if (sfp->module_power_mW <= 1000)
++			goto insert;
+ 
++		sfp_sm_mod_next(sfp, SFP_MOD_HPOWER, 0);
++		/* fall through */
+ 	case SFP_MOD_HPOWER:
+-		if (event == SFP_E_TIMEOUT) {
+-			sfp_sm_mod_next(sfp, SFP_MOD_PRESENT, 0);
++		/* Enable high power mode */
++		err = sfp_sm_mod_hpower(sfp, true);
++		if (err == 0)
++			sfp_sm_mod_next(sfp, SFP_MOD_WAITPWR, T_HPOWER_LEVEL);
++		else if (err != -EAGAIN)
++			sfp_sm_mod_next(sfp, SFP_MOD_ERROR, 0);
++		else
++			sfp_sm_set_timer(sfp, T_PROBE_RETRY);
++		break;
++
++	case SFP_MOD_WAITPWR:
++		/* Wait for T_HPOWER_LEVEL to time out */
++		if (event != SFP_E_TIMEOUT)
+ 			break;
+-		}
+-		/* fallthrough */
++
++	insert:
++		sfp_sm_mod_next(sfp, SFP_MOD_PRESENT, 0);
++		break;
++
+ 	case SFP_MOD_PRESENT:
+ 	case SFP_MOD_ERROR:
+ 		break;
diff --git a/target/linux/generic/backport-5.4/734-v5.5-net-sfp-move-module-insert-reporting-out-of-probe.patch b/target/linux/generic/backport-5.4/734-v5.5-net-sfp-move-module-insert-reporting-out-of-probe.patch
new file mode 100644
index 0000000000..26b6a6b0e4
--- /dev/null
+++ b/target/linux/generic/backport-5.4/734-v5.5-net-sfp-move-module-insert-reporting-out-of-probe.patch
@@ -0,0 +1,159 @@
+From 57cbf7453551db1df619b79410d79fc418d862d5 Mon Sep 17 00:00:00 2001
+From: Russell King <rmk+kernel@armlinux.org.uk>
+Date: Tue, 5 Nov 2019 13:00:45 +0000
+Subject: [PATCH 632/660] net: sfp: move module insert reporting out of probe
+
+Move the module insertion reporting out of the probe handling, but
+after we have detected that the upstream has attached (since that is
+whom we are reporting insertion to.)
+
+Only report module removal if we had previously reported a module
+insertion.
+
+This gives cleaner semantics, and means we can probe the module before
+we have an upstream attached.
+
+Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
+---
+ drivers/net/phy/sfp.c | 58 +++++++++++++++++++++++++++++--------------
+ 1 file changed, 40 insertions(+), 18 deletions(-)
+
+--- a/drivers/net/phy/sfp.c
++++ b/drivers/net/phy/sfp.c
+@@ -45,11 +45,12 @@ enum {
+ 	SFP_E_TIMEOUT,
+ 
+ 	SFP_MOD_EMPTY = 0,
++	SFP_MOD_ERROR,
+ 	SFP_MOD_PROBE,
++	SFP_MOD_WAITDEV,
+ 	SFP_MOD_HPOWER,
+ 	SFP_MOD_WAITPWR,
+ 	SFP_MOD_PRESENT,
+-	SFP_MOD_ERROR,
+ 
+ 	SFP_DEV_DETACHED = 0,
+ 	SFP_DEV_DOWN,
+@@ -68,11 +69,12 @@ enum {
+ 
+ static const char  * const mod_state_strings[] = {
+ 	[SFP_MOD_EMPTY] = "empty",
++	[SFP_MOD_ERROR] = "error",
+ 	[SFP_MOD_PROBE] = "probe",
++	[SFP_MOD_WAITDEV] = "waitdev",
+ 	[SFP_MOD_HPOWER] = "hpower",
+ 	[SFP_MOD_WAITPWR] = "waitpwr",
+ 	[SFP_MOD_PRESENT] = "present",
+-	[SFP_MOD_ERROR] = "error",
+ };
+ 
+ static const char *mod_state_to_str(unsigned short mod_state)
+@@ -1479,16 +1481,13 @@ static int sfp_sm_mod_probe(struct sfp *
+ 	if (ret < 0)
+ 		return ret;
+ 
+-	ret = sfp_module_insert(sfp->sfp_bus, &sfp->id);
+-	if (ret < 0)
+-		return ret;
+-
+ 	return 0;
+ }
+ 
+ static void sfp_sm_mod_remove(struct sfp *sfp)
+ {
+-	sfp_module_remove(sfp->sfp_bus);
++	if (sfp->sm_mod_state > SFP_MOD_WAITDEV)
++		sfp_module_remove(sfp->sfp_bus);
+ 
+ 	sfp_hwmon_remove(sfp);
+ 
+@@ -1539,12 +1538,12 @@ static void sfp_sm_module(struct sfp *sf
+ 	}
+ 
+ 	/* Handle device detach globally */
+-	if (sfp->sm_dev_state < SFP_DEV_DOWN) {
++	if (sfp->sm_dev_state < SFP_DEV_DOWN &&
++	    sfp->sm_mod_state > SFP_MOD_WAITDEV) {
+ 		if (sfp->module_power_mW > 1000 &&
+ 		    sfp->sm_mod_state > SFP_MOD_HPOWER)
+ 			sfp_sm_mod_hpower(sfp, false);
+-		if (sfp->sm_mod_state > SFP_MOD_EMPTY)
+-			sfp_sm_mod_next(sfp, SFP_MOD_EMPTY, 0);
++		sfp_sm_mod_next(sfp, SFP_MOD_WAITDEV, 0);
+ 		return;
+ 	}
+ 
+@@ -1555,6 +1554,7 @@ static void sfp_sm_module(struct sfp *sf
+ 		break;
+ 
+ 	case SFP_MOD_PROBE:
++		/* Wait for T_PROBE_INIT to time out */
+ 		if (event != SFP_E_TIMEOUT)
+ 			break;
+ 
+@@ -1568,6 +1568,20 @@ static void sfp_sm_module(struct sfp *sf
+ 			break;
+ 		}
+ 
++		sfp_sm_mod_next(sfp, SFP_MOD_WAITDEV, 0);
++		/* fall through */
++	case SFP_MOD_WAITDEV:
++		/* Ensure that the device is attached before proceeding */
++		if (sfp->sm_dev_state < SFP_DEV_DOWN)
++			break;
++
++		/* Report the module insertion to the upstream device */
++		err = sfp_module_insert(sfp->sfp_bus, &sfp->id);
++		if (err < 0) {
++			sfp_sm_mod_next(sfp, SFP_MOD_ERROR, 0);
++			break;
++		}
++
+ 		/* If this is a power level 1 module, we are done */
+ 		if (sfp->module_power_mW <= 1000)
+ 			goto insert;
+@@ -1577,12 +1591,17 @@ static void sfp_sm_module(struct sfp *sf
+ 	case SFP_MOD_HPOWER:
+ 		/* Enable high power mode */
+ 		err = sfp_sm_mod_hpower(sfp, true);
+-		if (err == 0)
+-			sfp_sm_mod_next(sfp, SFP_MOD_WAITPWR, T_HPOWER_LEVEL);
+-		else if (err != -EAGAIN)
+-			sfp_sm_mod_next(sfp, SFP_MOD_ERROR, 0);
+-		else
+-			sfp_sm_set_timer(sfp, T_PROBE_RETRY);
++		if (err < 0) {
++			if (err != -EAGAIN) {
++				sfp_module_remove(sfp->sfp_bus);
++				sfp_sm_mod_next(sfp, SFP_MOD_ERROR, 0);
++			} else {
++				sfp_sm_set_timer(sfp, T_PROBE_RETRY);
++			}
++			break;
++		}
++
++		sfp_sm_mod_next(sfp, SFP_MOD_WAITPWR, T_HPOWER_LEVEL);
+ 		break;
+ 
+ 	case SFP_MOD_WAITPWR:
+@@ -1750,8 +1769,6 @@ static void sfp_sm_event(struct sfp *sfp
+ static void sfp_attach(struct sfp *sfp)
+ {
+ 	sfp_sm_event(sfp, SFP_E_DEV_ATTACH);
+-	if (sfp->state & SFP_F_PRESENT)
+-		sfp_sm_event(sfp, SFP_E_INSERT);
+ }
+ 
+ static void sfp_detach(struct sfp *sfp)
+@@ -2001,6 +2018,11 @@ static int sfp_probe(struct platform_dev
+ 		sfp->state |= SFP_F_RATE_SELECT;
+ 	sfp_set_state(sfp, sfp->state);
+ 	sfp_module_tx_disable(sfp);
++	if (sfp->state & SFP_F_PRESENT) {
++		rtnl_lock();
++		sfp_sm_event(sfp, SFP_E_INSERT);
++		rtnl_unlock();
++	}
+ 
+ 	for (i = 0; i < GPIO_MAX; i++) {
+ 		if (gpio_flags[i] != GPIOD_IN || !sfp->gpio[i])
diff --git a/target/linux/generic/backport-5.4/735-v5.5-net-sfp-allow-sfp-to-probe-slow-to-initialise-GPON-m.patch b/target/linux/generic/backport-5.4/735-v5.5-net-sfp-allow-sfp-to-probe-slow-to-initialise-GPON-m.patch
new file mode 100644
index 0000000000..6cbd0864f7
--- /dev/null
+++ b/target/linux/generic/backport-5.4/735-v5.5-net-sfp-allow-sfp-to-probe-slow-to-initialise-GPON-m.patch
@@ -0,0 +1,110 @@
+From fb56cd08880aff8fb030e684fa4311bef712a499 Mon Sep 17 00:00:00 2001
+From: Russell King <rmk+kernel@armlinux.org.uk>
+Date: Tue, 5 Nov 2019 13:02:30 +0000
+Subject: [PATCH 633/660] net: sfp: allow sfp to probe slow to initialise GPON
+ modules
+
+Some GPON modules (e.g. Huawei MA5671A) take a significant amount of
+time to start responding on the I2C bus, contary to the SFF
+specifications.
+
+Work around this by implementing a two-level timeout strategy, where
+we initially quickly retry for the module, and then use a slower retry
+after we exceed a maximum number of quick attempts.
+
+Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
+---
+ drivers/net/phy/sfp.c | 38 ++++++++++++++++++++++++++++----------
+ 1 file changed, 28 insertions(+), 10 deletions(-)
+
+--- a/drivers/net/phy/sfp.c
++++ b/drivers/net/phy/sfp.c
+@@ -165,9 +165,12 @@ static const enum gpiod_flags gpio_flags
+  * The SFF-8472 specifies t_serial ("Time from power on until module is
+  * ready for data transmission over the two wire serial bus.") as 300ms.
+  */
+-#define T_SERIAL	msecs_to_jiffies(300)
+-#define T_HPOWER_LEVEL	msecs_to_jiffies(300)
+-#define T_PROBE_RETRY	msecs_to_jiffies(100)
++#define T_SERIAL		msecs_to_jiffies(300)
++#define T_HPOWER_LEVEL		msecs_to_jiffies(300)
++#define T_PROBE_RETRY_INIT	msecs_to_jiffies(100)
++#define R_PROBE_RETRY_INIT	10
++#define T_PROBE_RETRY_SLOW	msecs_to_jiffies(5000)
++#define R_PROBE_RETRY_SLOW	12
+ 
+ /* SFP modules appear to always have their PHY configured for bus address
+  * 0x56 (which with mdio-i2c, translates to a PHY address of 22).
+@@ -202,6 +205,8 @@ struct sfp {
+ 	struct delayed_work timeout;
+ 	struct mutex sm_mutex;			/* Protects state machine */
+ 	unsigned char sm_mod_state;
++	unsigned char sm_mod_tries_init;
++	unsigned char sm_mod_tries;
+ 	unsigned char sm_dev_state;
+ 	unsigned short sm_state;
+ 	unsigned int sm_retries;
+@@ -1392,7 +1397,7 @@ static int sfp_sm_mod_hpower(struct sfp
+ 	return 0;
+ }
+ 
+-static int sfp_sm_mod_probe(struct sfp *sfp)
++static int sfp_sm_mod_probe(struct sfp *sfp, bool report)
+ {
+ 	/* SFP module inserted - read I2C data */
+ 	struct sfp_eeprom_id id;
+@@ -1402,7 +1407,8 @@ static int sfp_sm_mod_probe(struct sfp *
+ 
+ 	ret = sfp_read(sfp, false, 0, &id, sizeof(id));
+ 	if (ret < 0) {
+-		dev_err(sfp->dev, "failed to read EEPROM: %d\n", ret);
++		if (report)
++			dev_err(sfp->dev, "failed to read EEPROM: %d\n", ret);
+ 		return -EAGAIN;
+ 	}
+ 
+@@ -1549,8 +1555,11 @@ static void sfp_sm_module(struct sfp *sf
+ 
+ 	switch (sfp->sm_mod_state) {
+ 	default:
+-		if (event == SFP_E_INSERT)
++		if (event == SFP_E_INSERT) {
+ 			sfp_sm_mod_next(sfp, SFP_MOD_PROBE, T_SERIAL);
++			sfp->sm_mod_tries_init = R_PROBE_RETRY_INIT;
++			sfp->sm_mod_tries = R_PROBE_RETRY_SLOW;
++		}
+ 		break;
+ 
+ 	case SFP_MOD_PROBE:
+@@ -1558,10 +1567,19 @@ static void sfp_sm_module(struct sfp *sf
+ 		if (event != SFP_E_TIMEOUT)
+ 			break;
+ 
+-		err = sfp_sm_mod_probe(sfp);
++		err = sfp_sm_mod_probe(sfp, sfp->sm_mod_tries == 1);
+ 		if (err == -EAGAIN) {
+-			sfp_sm_set_timer(sfp, T_PROBE_RETRY);
+-			break;
++			if (sfp->sm_mod_tries_init &&
++			   --sfp->sm_mod_tries_init) {
++				sfp_sm_set_timer(sfp, T_PROBE_RETRY_INIT);
++				break;
++			} else if (sfp->sm_mod_tries && --sfp->sm_mod_tries) {
++				if (sfp->sm_mod_tries == R_PROBE_RETRY_SLOW - 1)
++					dev_warn(sfp->dev,
++						 "please wait, module slow to respond\n");
++				sfp_sm_set_timer(sfp, T_PROBE_RETRY_SLOW);
++				break;
++			}
+ 		}
+ 		if (err < 0) {
+ 			sfp_sm_mod_next(sfp, SFP_MOD_ERROR, 0);
+@@ -1596,7 +1614,7 @@ static void sfp_sm_module(struct sfp *sf
+ 				sfp_module_remove(sfp->sfp_bus);
+ 				sfp_sm_mod_next(sfp, SFP_MOD_ERROR, 0);
+ 			} else {
+-				sfp_sm_set_timer(sfp, T_PROBE_RETRY);
++				sfp_sm_set_timer(sfp, T_PROBE_RETRY_INIT);
+ 			}
+ 			break;
+ 		}
diff --git a/target/linux/generic/backport-5.4/736-v5.5-net-sfp-allow-modules-with-slow-diagnostics-to-probe.patch b/target/linux/generic/backport-5.4/736-v5.5-net-sfp-allow-modules-with-slow-diagnostics-to-probe.patch
new file mode 100644
index 0000000000..fe1e6c4822
--- /dev/null
+++ b/target/linux/generic/backport-5.4/736-v5.5-net-sfp-allow-modules-with-slow-diagnostics-to-probe.patch
@@ -0,0 +1,198 @@
+From 559391fc20fae506adcb311b904cc544c76436c0 Mon Sep 17 00:00:00 2001
+From: Russell King <rmk+kernel@armlinux.org.uk>
+Date: Thu, 7 Nov 2019 18:52:07 +0000
+Subject: [PATCH 634/660] net: sfp: allow modules with slow diagnostics to
+ probe
+
+When a module is inserted, we attempt to read read the ID from address
+0x50.  Once we are able to read the ID, we immediately attempt to
+initialise the hwmon support by reading from address 0x51.  If this
+fails, then we fall into error state, and assume that the module is
+not usable.
+
+Modules such as the ALCATELLUCENT 3FE46541AA use a real EEPROM for
+I2C address 0x50, which responds immediately.  However, address 0x51
+is an emulated, which only becomes available once the on-board firmware
+has booted.  This prompts us to fall into the error state.
+
+Since the module may be usable without diagnostics, arrange for the
+hwmon probe independent of the rest of the SFP itself, retrying every
+5s for up to about 60s for the monitoring to become available, and
+print an error message if it doesn't become available.
+
+Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
+---
+ drivers/net/phy/sfp.c | 96 +++++++++++++++++++++++++++++++++----------
+ 1 file changed, 74 insertions(+), 22 deletions(-)
+
+--- a/drivers/net/phy/sfp.c
++++ b/drivers/net/phy/sfp.c
+@@ -216,6 +216,8 @@ struct sfp {
+ 
+ #if IS_ENABLED(CONFIG_HWMON)
+ 	struct sfp_diag diag;
++	struct delayed_work hwmon_probe;
++	unsigned int hwmon_tries;
+ 	struct device *hwmon_dev;
+ 	char *hwmon_name;
+ #endif
+@@ -1094,29 +1096,27 @@ static const struct hwmon_chip_info sfp_
+ 	.info = sfp_hwmon_info,
+ };
+ 
+-static int sfp_hwmon_insert(struct sfp *sfp)
++static void sfp_hwmon_probe(struct work_struct *work)
+ {
++	struct sfp *sfp = container_of(work, struct sfp, hwmon_probe.work);
+ 	int err, i;
+ 
+-	if (sfp->id.ext.sff8472_compliance == SFP_SFF8472_COMPLIANCE_NONE)
+-		return 0;
+-
+-	if (!(sfp->id.ext.diagmon & SFP_DIAGMON_DDM))
+-		return 0;
+-
+-	if (sfp->id.ext.diagmon & SFP_DIAGMON_ADDRMODE)
+-		/* This driver in general does not support address
+-		 * change.
+-		 */
+-		return 0;
+-
+ 	err = sfp_read(sfp, true, 0, &sfp->diag, sizeof(sfp->diag));
+-	if (err < 0)
+-		return err;
++	if (err < 0) {
++		if (sfp->hwmon_tries--) {
++			mod_delayed_work(system_wq, &sfp->hwmon_probe,
++					 T_PROBE_RETRY_SLOW);
++		} else {
++			dev_warn(sfp->dev, "hwmon probe failed: %d\n", err);
++		}
++		return;
++	}
+ 
+ 	sfp->hwmon_name = kstrdup(dev_name(sfp->dev), GFP_KERNEL);
+-	if (!sfp->hwmon_name)
+-		return -ENODEV;
++	if (!sfp->hwmon_name) {
++		dev_err(sfp->dev, "out of memory for hwmon name\n");
++		return;
++	}
+ 
+ 	for (i = 0; sfp->hwmon_name[i]; i++)
+ 		if (hwmon_is_bad_char(sfp->hwmon_name[i]))
+@@ -1126,18 +1126,52 @@ static int sfp_hwmon_insert(struct sfp *
+ 							 sfp->hwmon_name, sfp,
+ 							 &sfp_hwmon_chip_info,
+ 							 NULL);
++	if (IS_ERR(sfp->hwmon_dev))
++		dev_err(sfp->dev, "failed to register hwmon device: %ld\n",
++			PTR_ERR(sfp->hwmon_dev));
++}
++
++static int sfp_hwmon_insert(struct sfp *sfp)
++{
++	if (sfp->id.ext.sff8472_compliance == SFP_SFF8472_COMPLIANCE_NONE)
++		return 0;
++
++	if (!(sfp->id.ext.diagmon & SFP_DIAGMON_DDM))
++		return 0;
++
++	if (sfp->id.ext.diagmon & SFP_DIAGMON_ADDRMODE)
++		/* This driver in general does not support address
++		 * change.
++		 */
++		return 0;
++
++	mod_delayed_work(system_wq, &sfp->hwmon_probe, 1);
++	sfp->hwmon_tries = R_PROBE_RETRY_SLOW;
+ 
+-	return PTR_ERR_OR_ZERO(sfp->hwmon_dev);
++	return 0;
+ }
+ 
+ static void sfp_hwmon_remove(struct sfp *sfp)
+ {
++	cancel_delayed_work_sync(&sfp->hwmon_probe);
+ 	if (!IS_ERR_OR_NULL(sfp->hwmon_dev)) {
+ 		hwmon_device_unregister(sfp->hwmon_dev);
+ 		sfp->hwmon_dev = NULL;
+ 		kfree(sfp->hwmon_name);
+ 	}
+ }
++
++static int sfp_hwmon_init(struct sfp *sfp)
++{
++	INIT_DELAYED_WORK(&sfp->hwmon_probe, sfp_hwmon_probe);
++
++	return 0;
++}
++
++static void sfp_hwmon_exit(struct sfp *sfp)
++{
++	cancel_delayed_work_sync(&sfp->hwmon_probe);
++}
+ #else
+ static int sfp_hwmon_insert(struct sfp *sfp)
+ {
+@@ -1147,6 +1181,15 @@ static int sfp_hwmon_insert(struct sfp *
+ static void sfp_hwmon_remove(struct sfp *sfp)
+ {
+ }
++
++static int sfp_hwmon_init(struct sfp *sfp)
++{
++	return 0;
++}
++
++static void sfp_hwmon_exit(struct sfp *sfp)
++{
++}
+ #endif
+ 
+ /* Helpers */
+@@ -1483,10 +1526,6 @@ static int sfp_sm_mod_probe(struct sfp *
+ 	if (ret < 0)
+ 		return ret;
+ 
+-	ret = sfp_hwmon_insert(sfp);
+-	if (ret < 0)
+-		return ret;
+-
+ 	return 0;
+ }
+ 
+@@ -1635,6 +1674,15 @@ static void sfp_sm_module(struct sfp *sf
+ 	case SFP_MOD_ERROR:
+ 		break;
+ 	}
++
++#if IS_ENABLED(CONFIG_HWMON)
++	if (sfp->sm_mod_state >= SFP_MOD_WAITDEV &&
++	    IS_ERR_OR_NULL(sfp->hwmon_dev)) {
++		err = sfp_hwmon_insert(sfp);
++		if (err)
++			dev_warn(sfp->dev, "hwmon probe failed: %d\n", err);
++	}
++#endif
+ }
+ 
+ static void sfp_sm_main(struct sfp *sfp, unsigned int event)
+@@ -1936,6 +1984,8 @@ static struct sfp *sfp_alloc(struct devi
+ 	INIT_DELAYED_WORK(&sfp->poll, sfp_poll);
+ 	INIT_DELAYED_WORK(&sfp->timeout, sfp_timeout);
+ 
++	sfp_hwmon_init(sfp);
++
+ 	return sfp;
+ }
+ 
+@@ -1943,6 +1993,8 @@ static void sfp_cleanup(void *data)
+ {
+ 	struct sfp *sfp = data;
+ 
++	sfp_hwmon_exit(sfp);
++
+ 	cancel_delayed_work_sync(&sfp->poll);
+ 	cancel_delayed_work_sync(&sfp->timeout);
+ 	if (sfp->i2c_mii) {
diff --git a/target/linux/generic/backport-5.4/737-v5.5-net-phy-add-core-phylib-sfp-support.patch b/target/linux/generic/backport-5.4/737-v5.5-net-phy-add-core-phylib-sfp-support.patch
new file mode 100644
index 0000000000..9b34d40a0f
--- /dev/null
+++ b/target/linux/generic/backport-5.4/737-v5.5-net-phy-add-core-phylib-sfp-support.patch
@@ -0,0 +1,183 @@
+From eb156db588ac583cdae7b91eaac9c0ad3a358e63 Mon Sep 17 00:00:00 2001
+From: Russell King <rmk+kernel@armlinux.org.uk>
+Date: Sun, 15 Sep 2019 20:05:34 +0100
+Subject: [PATCH 635/660] net: phy: add core phylib sfp support
+
+Add core phylib help for supporting SFP sockets on PHYs.  This provides
+a mechanism to inform the SFP layer about PHY up/down events, and also
+unregister the SFP bus when the PHY is going away.
+
+Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
+---
+ drivers/net/phy/phy.c        |  7 ++++
+ drivers/net/phy/phy_device.c | 66 ++++++++++++++++++++++++++++++++++++
+ include/linux/phy.h          | 11 ++++++
+ 3 files changed, 84 insertions(+)
+
+--- a/drivers/net/phy/phy.c
++++ b/drivers/net/phy/phy.c
+@@ -30,6 +30,7 @@
+ #include <linux/ethtool.h>
+ #include <linux/phy.h>
+ #include <linux/phy_led_triggers.h>
++#include <linux/sfp.h>
+ #include <linux/workqueue.h>
+ #include <linux/mdio.h>
+ #include <linux/io.h>
+@@ -871,6 +872,9 @@ void phy_stop(struct phy_device *phydev)
+ 	if (phy_interrupt_is_valid(phydev))
+ 		phy_disable_interrupts(phydev);
+ 
++	if (phydev->sfp_bus)
++		sfp_upstream_stop(phydev->sfp_bus);
++
+ 	phydev->state = PHY_HALTED;
+ 
+ out_unlock:
+@@ -899,6 +903,9 @@ void phy_start(struct phy_device *phydev
+ 
+ 	mutex_lock(&phydev->lock);
+ 
++	if (phydev->sfp_bus)
++		sfp_upstream_start(phydev->sfp_bus);
++
+ 	switch (phydev->state) {
+ 	case PHY_STARTING:
+ 		phydev->state = PHY_PENDING;
+--- a/drivers/net/phy/phy_device.c
++++ b/drivers/net/phy/phy_device.c
+@@ -31,6 +31,7 @@
+ #include <linux/ethtool.h>
+ #include <linux/phy.h>
+ #include <linux/phy_led_triggers.h>
++#include <linux/sfp.h>
+ #include <linux/mdio.h>
+ #include <linux/io.h>
+ #include <linux/uaccess.h>
+@@ -944,6 +945,65 @@ void phy_attached_print(struct phy_devic
+ EXPORT_SYMBOL(phy_attached_print);
+ 
+ /**
++ * phy_sfp_attach - attach the SFP bus to the PHY upstream network device
++ * @upstream: pointer to the phy device
++ * @bus: sfp bus representing cage being attached
++ *
++ * This is used to fill in the sfp_upstream_ops .attach member.
++ */
++void phy_sfp_attach(void *upstream, struct sfp_bus *bus)
++{
++	struct phy_device *phydev = upstream;
++
++	if (phydev->attached_dev)
++		phydev->attached_dev->sfp_bus = bus;
++	phydev->sfp_bus_attached = true;
++}
++EXPORT_SYMBOL(phy_sfp_attach);
++
++/**
++ * phy_sfp_detach - detach the SFP bus from the PHY upstream network device
++ * @upstream: pointer to the phy device
++ * @bus: sfp bus representing cage being attached
++ *
++ * This is used to fill in the sfp_upstream_ops .detach member.
++ */
++void phy_sfp_detach(void *upstream, struct sfp_bus *bus)
++{
++	struct phy_device *phydev = upstream;
++
++	if (phydev->attached_dev)
++		phydev->attached_dev->sfp_bus = NULL;
++	phydev->sfp_bus_attached = false;
++}
++EXPORT_SYMBOL(phy_sfp_detach);
++
++/**
++ * phy_sfp_probe - probe for a SFP cage attached to this PHY device
++ * @phydev: Pointer to phy_device
++ * @ops: SFP's upstream operations
++ */
++int phy_sfp_probe(struct phy_device *phydev,
++		  const struct sfp_upstream_ops *ops)
++{
++	struct sfp_bus *bus;
++	int ret;
++
++	if (phydev->mdio.dev.fwnode) {
++		bus = sfp_bus_find_fwnode(phydev->mdio.dev.fwnode);
++		if (IS_ERR(bus))
++			return PTR_ERR(bus);
++
++		phydev->sfp_bus = bus;
++
++		ret = sfp_bus_add_upstream(bus, phydev, ops);
++		sfp_bus_put(bus);
++	}
++	return 0;
++}
++EXPORT_SYMBOL(phy_sfp_probe);
++
++/**
+  * phy_attach_direct - attach a network device to a given PHY device pointer
+  * @dev: network device to attach
+  * @phydev: Pointer to phy_device to attach
+@@ -1016,6 +1076,9 @@ int phy_attach_direct(struct net_device
+ 	phydev->attached_dev = dev;
+ 	dev->phydev = phydev;
+ 
++	if (phydev->sfp_bus_attached)
++		dev->sfp_bus = phydev->sfp_bus;
++
+ 	/* Some Ethernet drivers try to connect to a PHY device before
+ 	 * calling register_netdevice() -> netdev_register_kobject() and
+ 	 * does the dev->dev.kobj initialization. Here we only check for
+@@ -1950,6 +2013,9 @@ static int phy_remove(struct device *dev
+ 	phydev->state = PHY_DOWN;
+ 	mutex_unlock(&phydev->lock);
+ 
++	sfp_bus_del_upstream(phydev->sfp_bus);
++	phydev->sfp_bus = NULL;
++
+ 	if (phydev->drv && phydev->drv->remove) {
+ 		phydev->drv->remove(phydev);
+ 
+--- a/include/linux/phy.h
++++ b/include/linux/phy.h
+@@ -184,6 +184,8 @@ static inline const char *phy_modes(phy_
+ 
+ struct device;
+ struct phylink;
++struct sfp_bus;
++struct sfp_upstream_ops;
+ struct sk_buff;
+ 
+ /*
+@@ -382,6 +384,8 @@ struct phy_c45_device_ids {
+  * irq: IRQ number of the PHY's interrupt (-1 if none)
+  * phy_timer: The timer for handling the state machine
+  * phy_queue: A work_queue for the phy_mac_interrupt
++ * sfp_bus_attached: flag indicating whether the SFP bus has been attached
++ * sfp_bus: SFP bus attached to this PHY's fiber port
+  * attached_dev: The attached enet driver's device instance ptr
+  * adjust_link: Callback for the enet controller to respond to
+  * changes in the link state.
+@@ -471,6 +475,9 @@ struct phy_device {
+ 
+ 	struct mutex lock;
+ 
++	/* This may be modified under the rtnl lock */
++	bool sfp_bus_attached;
++	struct sfp_bus *sfp_bus;
+ 	struct phylink *phylink;
+ 	struct net_device *attached_dev;
+ 
+@@ -1031,6 +1038,10 @@ int phy_suspend(struct phy_device *phyde
+ int phy_resume(struct phy_device *phydev);
+ int __phy_resume(struct phy_device *phydev);
+ int phy_loopback(struct phy_device *phydev, bool enable);
++void phy_sfp_attach(void *upstream, struct sfp_bus *bus);
++void phy_sfp_detach(void *upstream, struct sfp_bus *bus);
++int phy_sfp_probe(struct phy_device *phydev,
++	          const struct sfp_upstream_ops *ops);
+ struct phy_device *phy_attach(struct net_device *dev, const char *bus_id,
+ 			      phy_interface_t interface);
+ struct phy_device *phy_find_first(struct mii_bus *bus);
diff --git a/target/linux/generic/backport-5.4/738-v5.5-net-phy-marvell10g-add-SFP-support.patch b/target/linux/generic/backport-5.4/738-v5.5-net-phy-marvell10g-add-SFP-support.patch
new file mode 100644
index 0000000000..a67431ce5c
--- /dev/null
+++ b/target/linux/generic/backport-5.4/738-v5.5-net-phy-marvell10g-add-SFP-support.patch
@@ -0,0 +1,67 @@
+From 0836d9fb41ed90090ef4af0d7abe784ee7706f80 Mon Sep 17 00:00:00 2001
+From: Russell King <rmk+kernel@armlinux.org.uk>
+Date: Fri, 14 Apr 2017 14:21:25 +0100
+Subject: [PATCH 636/660] net: phy: marvell10g: add SFP+ support
+
+Add support for SFP+ cages to the Marvell 10G PHY driver. This is
+slightly complicated by the way phylib works in that we need to use
+a multi-step process to attach the SFP bus, and we also need to track
+the phylink state machine to know when the module's transmit disable
+signal should change state.
+
+With appropriate DT changes, this allows the SFP+ canges on the
+Macchiatobin platform to be functional.
+
+Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
+---
+ drivers/net/phy/marvell10g.c | 25 ++++++++++++++++++++++++-
+ 1 file changed, 24 insertions(+), 1 deletion(-)
+
+--- a/drivers/net/phy/marvell10g.c
++++ b/drivers/net/phy/marvell10g.c
+@@ -25,6 +25,7 @@
+ #include <linux/hwmon.h>
+ #include <linux/marvell_phy.h>
+ #include <linux/phy.h>
++#include <linux/sfp.h>
+ 
+ enum {
+ 	MV_PMA_BOOT		= 0xc050,
+@@ -219,6 +220,28 @@ static int mv3310_hwmon_probe(struct phy
+ }
+ #endif
+ 
++static int mv3310_sfp_insert(void *upstream, const struct sfp_eeprom_id *id)
++{
++	struct phy_device *phydev = upstream;
++	__ETHTOOL_DECLARE_LINK_MODE_MASK(support) = { 0, };
++	phy_interface_t iface;
++
++	sfp_parse_support(phydev->sfp_bus, id, support);
++	iface = sfp_select_interface(phydev->sfp_bus, id, support);
++
++	if (iface != PHY_INTERFACE_MODE_10GKR) {
++		dev_err(&phydev->mdio.dev, "incompatible SFP module inserted\n");
++		return -EINVAL;
++	}
++	return 0;
++}
++
++static const struct sfp_upstream_ops mv3310_sfp_ops = {
++	.attach = phy_sfp_attach,
++	.detach = phy_sfp_detach,
++	.module_insert = mv3310_sfp_insert,
++};
++
+ static int mv3310_probe(struct phy_device *phydev)
+ {
+ 	struct mv3310_priv *priv;
+@@ -249,7 +272,7 @@ static int mv3310_probe(struct phy_devic
+ 	if (ret)
+ 		return ret;
+ 
+-	return 0;
++	return phy_sfp_probe(phydev, &mv3310_sfp_ops);
+ }
+ 
+ static int mv3310_suspend(struct phy_device *phydev)
diff --git a/target/linux/generic/backport-5.4/739-v5.5-net-phylink-update-to-use-phy_support_asym_pause.patch b/target/linux/generic/backport-5.4/739-v5.5-net-phylink-update-to-use-phy_support_asym_pause.patch
new file mode 100644
index 0000000000..15db0abc96
--- /dev/null
+++ b/target/linux/generic/backport-5.4/739-v5.5-net-phylink-update-to-use-phy_support_asym_pause.patch
@@ -0,0 +1,45 @@
+From 09d7d8395ec61fba4392b35baa6f71c4e36489df Mon Sep 17 00:00:00 2001
+From: Russell King <rmk+kernel@armlinux.org.uk>
+Date: Fri, 8 Nov 2019 15:18:02 +0000
+Subject: [PATCH 637/660] net: phylink: update to use phy_support_asym_pause()
+
+Use phy_support_asym_pause() rather than open-coding it.
+
+Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
+---
+ drivers/net/phy/phylink.c | 17 +++++++----------
+ 1 file changed, 7 insertions(+), 10 deletions(-)
+
+--- a/drivers/net/phy/phylink.c
++++ b/drivers/net/phy/phylink.c
+@@ -678,12 +678,6 @@ static int phylink_bringup_phy(struct ph
+ 	u32 advertising;
+ 	int ret;
+ 
+-	memset(&config, 0, sizeof(config));
+-	ethtool_convert_legacy_u32_to_link_mode(supported, phy->supported);
+-	ethtool_convert_legacy_u32_to_link_mode(config.advertising,
+-						phy->advertising);
+-	config.interface = pl->link_config.interface;
+-
+ 	/*
+ 	 * This is the new way of dealing with flow control for PHYs,
+ 	 * as described by Timur Tabi in commit 529ed1275263 ("net: phy:
+@@ -691,10 +685,13 @@ static int phylink_bringup_phy(struct ph
+ 	 * using our validate call to the MAC, we rely upon the MAC
+ 	 * clearing the bits from both supported and advertising fields.
+ 	 */
+-	if (phylink_test(supported, Pause))
+-		phylink_set(config.advertising, Pause);
+-	if (phylink_test(supported, Asym_Pause))
+-		phylink_set(config.advertising, Asym_Pause);
++	phy_support_asym_pause(phy);
++
++	memset(&config, 0, sizeof(config));
++	ethtool_convert_legacy_u32_to_link_mode(supported, phy->supported);
++	ethtool_convert_legacy_u32_to_link_mode(config.advertising,
++						phy->advertising);
++	config.interface = pl->link_config.interface;
+ 
+ 	ret = phylink_validate(pl, supported, &config);
+ 	if (ret)
diff --git a/target/linux/generic/backport-5.4/740-v5.5-net-phy-avoid-matching-all-ones-clause-45-PHY-IDs.patch b/target/linux/generic/backport-5.4/740-v5.5-net-phy-avoid-matching-all-ones-clause-45-PHY-IDs.patch
new file mode 100644
index 0000000000..81f161e9b1
--- /dev/null
+++ b/target/linux/generic/backport-5.4/740-v5.5-net-phy-avoid-matching-all-ones-clause-45-PHY-IDs.patch
@@ -0,0 +1,63 @@
+From 1be8018db381200c24854e0c299206c557f76fe0 Mon Sep 17 00:00:00 2001
+From: Russell King <rmk+kernel@armlinux.org.uk>
+Date: Mon, 11 Nov 2019 11:58:09 +0000
+Subject: [PATCH 638/660] net: phy: avoid matching all-ones clause 45 PHY IDs
+
+We currently match clause 45 PHYs using any ID read from a MMD marked
+as present in the "Devices in package" registers 5 and 6.  However,
+this is incorrect.  45.2 says:
+
+  "The definition of the term package is vendor specific and could be
+   a chip, module, or other similar entity."
+
+so a package could be more or less than the whole PHY - a PHY could be
+made up of several modules instantiated onto a single chip such as the
+Marvell 88x3310, or some of the MMDs could be disabled according to
+chip configuration, such as the Broadcom 84881.
+
+In the case of Broadcom 84881, the "Devices in package" registers
+contain 0xc000009b, meaning that there is a PHYXS present in the
+package, but all registers in MMD 4 return 0xffff.  This leads to our
+matching code incorrectly binding this PHY to one of our generic PHY
+drivers.
+
+This patch changes the way we determine whether to attempt to match a
+MMD identifier, or use it to request a module - if the identifier is
+all-ones, then we skip over it. When reading the identifiers, we
+initialise phydev->c45_ids.device_ids to all-ones, only reading the
+device ID if the "Devices in package" registers indicates we should.
+
+This avoids the generic drivers incorrectly matching on a PHY ID of
+0xffffffff.
+
+Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
+---
+ drivers/net/phy/phy_device.c | 7 +++++--
+ 1 file changed, 5 insertions(+), 2 deletions(-)
+
+--- a/drivers/net/phy/phy_device.c
++++ b/drivers/net/phy/phy_device.c
+@@ -335,7 +335,7 @@ static int phy_bus_match(struct device *
+ 
+ 	if (phydev->is_c45) {
+ 		for (i = 1; i < num_ids; i++) {
+-			if (!(phydev->c45_ids.devices_in_package & (1 << i)))
++			if (phydev->c45_ids.device_ids[i] == 0xffffffff)
+ 				continue;
+ 
+ 			if ((phydrv->phy_id & phydrv->phy_id_mask) ==
+@@ -623,10 +623,13 @@ static int get_phy_id(struct mii_bus *bu
+  */
+ struct phy_device *get_phy_device(struct mii_bus *bus, int addr, bool is_c45)
+ {
+-	struct phy_c45_device_ids c45_ids = {0};
++	struct phy_c45_device_ids c45_ids;
+ 	u32 phy_id = 0;
+ 	int r;
+ 
++	c45_ids.devices_in_package = 0;
++	memset(c45_ids.device_ids, 0xff, sizeof(c45_ids.device_ids));
++
+ 	r = get_phy_id(bus, addr, &phy_id, is_c45, &c45_ids);
+ 	if (r)
+ 		return ERR_PTR(r);
diff --git a/target/linux/generic/backport-5.4/741-v5.5-net-phylink-fix-link-mode-modification-in-PHY-mode.patch b/target/linux/generic/backport-5.4/741-v5.5-net-phylink-fix-link-mode-modification-in-PHY-mode.patch
new file mode 100644
index 0000000000..596ecc8272
--- /dev/null
+++ b/target/linux/generic/backport-5.4/741-v5.5-net-phylink-fix-link-mode-modification-in-PHY-mode.patch
@@ -0,0 +1,66 @@
+From 4c9633f75dc35abe1b9261e0415d77802f35741d Mon Sep 17 00:00:00 2001
+From: Russell King <rmk+kernel@armlinux.org.uk>
+Date: Tue, 5 Nov 2019 11:58:00 +0000
+Subject: [PATCH 639/660] net: phylink: fix link mode modification in PHY mode
+
+Modifying the link settings via phylink_ethtool_ksettings_set() and
+phylink_ethtool_set_pauseparam() didn't always work as intended for
+PHY based setups, as calling phylink_mac_config() would result in the
+unresolved configuration being committed to the MAC, rather than the
+configuration with the speed and duplex setting.
+
+This would work fine if the update caused the link to renegotiate,
+but if no settings have changed, phylib won't trigger a renegotiation
+cycle, and the MAC will be left incorrectly configured.
+
+Avoid calling phylink_mac_config() unless we are using an inband mode
+in phylink_ethtool_ksettings_set(), and use phy_set_asym_pause() as
+introduced in 4.20 to set the PHY settings in
+phylink_ethtool_set_pauseparam().
+
+Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
+---
+ drivers/net/phy/phylink.c | 24 ++++++++++++++++--------
+ 1 file changed, 16 insertions(+), 8 deletions(-)
+
+--- a/drivers/net/phy/phylink.c
++++ b/drivers/net/phy/phylink.c
+@@ -1210,7 +1210,13 @@ int phylink_ethtool_ksettings_set(struct
+ 	pl->link_config.duplex = our_kset.base.duplex;
+ 	pl->link_config.an_enabled = our_kset.base.autoneg != AUTONEG_DISABLE;
+ 
+-	if (!test_bit(PHYLINK_DISABLE_STOPPED, &pl->phylink_disable_state)) {
++	/* If we have a PHY, phylib will call our link state function if the
++	 * mode has changed, which will trigger a resolve and update the MAC
++	 * configuration. For a fixed link, this isn't able to change any
++	 * parameters, which just leaves inband mode.
++	 */
++	if (pl->link_an_mode == MLO_AN_INBAND &&
++	    !test_bit(PHYLINK_DISABLE_STOPPED, &pl->phylink_disable_state)) {
+ 		phylink_mac_config(pl, &pl->link_config);
+ 		phylink_mac_an_restart(pl);
+ 	}
+@@ -1290,14 +1296,16 @@ int phylink_ethtool_set_pauseparam(struc
+ 	if (pause->tx_pause)
+ 		config->pause |= MLO_PAUSE_TX;
+ 
+-	if (!test_bit(PHYLINK_DISABLE_STOPPED, &pl->phylink_disable_state)) {
++	/* If we have a PHY, phylib will call our link state function if the
++	 * mode has changed, which will trigger a resolve and update the MAC
++	 * configuration.
++	 */
++	if (pl->phydev) {
++		phy_set_asym_pause(pl->phydev, pause->rx_pause,
++				   pause->tx_pause);
++	} else if (!test_bit(PHYLINK_DISABLE_STOPPED,
++			     &pl->phylink_disable_state)) {
+ 		switch (pl->link_an_mode) {
+-		case MLO_AN_PHY:
+-			/* Silently mark the carrier down, and then trigger a resolve */
+-			netif_carrier_off(pl->netdev);
+-			phylink_run_resolve(pl);
+-			break;
+-
+ 		case MLO_AN_FIXED:
+ 			/* Should we allow fixed links to change against the config? */
+ 			phylink_resolve_flow(pl, config);
diff --git a/target/linux/generic/backport-5.4/742-v5.5-net-sfp-add-support-for-module-quirks.patch b/target/linux/generic/backport-5.4/742-v5.5-net-sfp-add-support-for-module-quirks.patch
new file mode 100644
index 0000000000..5068bd468c
--- /dev/null
+++ b/target/linux/generic/backport-5.4/742-v5.5-net-sfp-add-support-for-module-quirks.patch
@@ -0,0 +1,111 @@
+From 8df5dd55cef48c0769379e04dbc085a899b106d4 Mon Sep 17 00:00:00 2001
+From: Russell King <rmk+kernel@armlinux.org.uk>
+Date: Fri, 8 Mar 2019 14:02:25 +0000
+Subject: [PATCH 640/660] net: sfp: add support for module quirks
+
+Add support for applying module quirks to the list of supported
+ethtool link modes.
+
+Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
+---
+ drivers/net/phy/sfp-bus.c | 54 +++++++++++++++++++++++++++++++++++++++
+ 1 file changed, 54 insertions(+)
+
+--- a/drivers/net/phy/sfp-bus.c
++++ b/drivers/net/phy/sfp-bus.c
+@@ -9,6 +9,12 @@
+ 
+ #include "sfp.h"
+ 
++struct sfp_quirk {
++	const char *vendor;
++	const char *part;
++	void (*modes)(const struct sfp_eeprom_id *id, unsigned long *modes);
++};
++
+ /**
+  * struct sfp_bus - internal representation of a sfp bus
+  */
+@@ -21,6 +27,7 @@ struct sfp_bus {
+ 	const struct sfp_socket_ops *socket_ops;
+ 	struct device *sfp_dev;
+ 	struct sfp *sfp;
++	const struct sfp_quirk *sfp_quirk;
+ 
+ 	const struct sfp_upstream_ops *upstream_ops;
+ 	void *upstream;
+@@ -30,6 +37,46 @@ struct sfp_bus {
+ 	bool started;
+ };
+ 
++static const struct sfp_quirk sfp_quirks[] = {
++};
++
++static size_t sfp_strlen(const char *str, size_t maxlen)
++{
++	size_t size, i;
++
++	/* Trailing characters should be filled with space chars */
++	for (i = 0, size = 0; i < maxlen; i++)
++		if (str[i] != ' ')
++			size = i + 1;
++
++	return size;
++}
++
++static bool sfp_match(const char *qs, const char *str, size_t len)
++{
++	if (!qs)
++		return true;
++	if (strlen(qs) != len)
++		return false;
++	return !strncmp(qs, str, len);
++}
++
++static const struct sfp_quirk *sfp_lookup_quirk(const struct sfp_eeprom_id *id)
++{
++	const struct sfp_quirk *q;
++	unsigned int i;
++	size_t vs, ps;
++
++	vs = sfp_strlen(id->base.vendor_name, ARRAY_SIZE(id->base.vendor_name));
++	ps = sfp_strlen(id->base.vendor_pn, ARRAY_SIZE(id->base.vendor_pn));
++
++	for (i = 0, q = sfp_quirks; i < ARRAY_SIZE(sfp_quirks); i++, q++)
++		if (sfp_match(q->vendor, id->base.vendor_name, vs) &&
++		    sfp_match(q->part, id->base.vendor_pn, ps))
++			return q;
++
++	return NULL;
++}
+ /**
+  * sfp_parse_port() - Parse the EEPROM base ID, setting the port type
+  * @bus: a pointer to the &struct sfp_bus structure for the sfp module
+@@ -233,6 +280,9 @@ void sfp_parse_support(struct sfp_bus *b
+ 			phylink_set(modes, 1000baseX_Full);
+ 	}
+ 
++	if (bus->sfp_quirk)
++		bus->sfp_quirk->modes(id, modes);
++
+ 	bitmap_or(support, support, modes, __ETHTOOL_LINK_MODE_MASK_NBITS);
+ 
+ 	phylink_set(support, Autoneg);
+@@ -609,6 +659,8 @@ int sfp_module_insert(struct sfp_bus *bu
+ 	const struct sfp_upstream_ops *ops = sfp_get_upstream_ops(bus);
+ 	int ret = 0;
+ 
++	bus->sfp_quirk = sfp_lookup_quirk(id);
++
+ 	if (ops && ops->module_insert)
+ 		ret = ops->module_insert(bus->upstream, id);
+ 
+@@ -622,6 +674,8 @@ void sfp_module_remove(struct sfp_bus *b
+ 
+ 	if (ops && ops->module_remove)
+ 		ops->module_remove(bus->upstream);
++
++	bus->sfp_quirk = NULL;
+ }
+ EXPORT_SYMBOL_GPL(sfp_module_remove);
+ 
diff --git a/target/linux/generic/backport-5.4/743-v5.5-net-sfp-add-some-quirks-for-GPON-modules.patch b/target/linux/generic/backport-5.4/743-v5.5-net-sfp-add-some-quirks-for-GPON-modules.patch
new file mode 100644
index 0000000000..10c34881d8
--- /dev/null
+++ b/target/linux/generic/backport-5.4/743-v5.5-net-sfp-add-some-quirks-for-GPON-modules.patch
@@ -0,0 +1,52 @@
+From ecaa542cfed078dbc356dadff0bad4b6a8e704a0 Mon Sep 17 00:00:00 2001
+From: Russell King <rmk+kernel@armlinux.org.uk>
+Date: Fri, 17 May 2019 10:14:45 +0100
+Subject: [PATCH 641/660] net: sfp: add some quirks for GPON modules
+
+Marc Micalizzi reports that Huawei MA5671A and Alcatel/Lucent G-010S-P
+modules are capable of 2500base-X, but incorrectly report their
+capabilities in the EEPROM.  It seems rather common that GPON modules
+mis-report.
+
+Let's fix these modules by adding some quirks.
+
+Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
+---
+ drivers/net/phy/sfp-bus.c | 25 +++++++++++++++++++++++++
+ 1 file changed, 25 insertions(+)
+
+--- a/drivers/net/phy/sfp-bus.c
++++ b/drivers/net/phy/sfp-bus.c
+@@ -37,7 +37,32 @@ struct sfp_bus {
+ 	bool started;
+ };
+ 
++static void sfp_quirk_2500basex(const struct sfp_eeprom_id *id,
++				unsigned long *modes)
++{
++	phylink_set(modes, 2500baseX_Full);
++}
++
+ static const struct sfp_quirk sfp_quirks[] = {
++	{
++		// Alcatel Lucent G-010S-P can operate at 2500base-X, but
++		// incorrectly report 2500MBd NRZ in their EEPROM
++		.vendor = "ALCATELLUCENT",
++		.part = "G010SP",
++		.modes = sfp_quirk_2500basex,
++	}, {
++		// Alcatel Lucent G-010S-A can operate at 2500base-X, but
++		// report 3.2GBd NRZ in their EEPROM
++		.vendor = "ALCATELLUCENT",
++		.part = "3FE46541AA",
++		.modes = sfp_quirk_2500basex,
++	}, {
++		// Huawei MA5671A can operate at 2500base-X, but report 1.2GBd
++		// NRZ in their EEPROM
++		.vendor = "HUAWEI",
++		.part = "MA5671A",
++		.modes = sfp_quirk_2500basex,
++	},
+ };
+ 
+ static size_t sfp_strlen(const char *str, size_t maxlen)
diff --git a/target/linux/generic/backport-5.4/744-v5.5-net-sfp-soft-status-and-control-support.patch b/target/linux/generic/backport-5.4/744-v5.5-net-sfp-soft-status-and-control-support.patch
new file mode 100644
index 0000000000..163d8072e6
--- /dev/null
+++ b/target/linux/generic/backport-5.4/744-v5.5-net-sfp-soft-status-and-control-support.patch
@@ -0,0 +1,225 @@
+From 40e0b3b15f7da92e6b065292b14af7b9bfb1c6e0 Mon Sep 17 00:00:00 2001
+From: Russell King <rmk+kernel@armlinux.org.uk>
+Date: Fri, 13 Sep 2019 23:00:35 +0100
+Subject: [PATCH 642/660] net: sfp: soft status and control support
+
+Add support for the soft status and control register, which allows
+TX_FAULT and RX_LOS to be monitored and TX_DISABLE to be set.  We
+make use of this when the board does not support GPIOs for these
+signals.
+
+Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
+---
+ drivers/net/phy/sfp.c | 110 ++++++++++++++++++++++++++++++++++--------
+ include/linux/sfp.h   |   4 ++
+ 2 files changed, 94 insertions(+), 20 deletions(-)
+
+--- a/drivers/net/phy/sfp.c
++++ b/drivers/net/phy/sfp.c
+@@ -199,7 +199,10 @@ struct sfp {
+ 	struct gpio_desc *gpio[GPIO_MAX];
+ 	int gpio_irq[GPIO_MAX];
+ 
++	bool need_poll;
++
+ 	struct mutex st_mutex;			/* Protects state */
++	unsigned int state_soft_mask;
+ 	unsigned int state;
+ 	struct delayed_work poll;
+ 	struct delayed_work timeout;
+@@ -393,24 +396,90 @@ static int sfp_i2c_configure(struct sfp
+ }
+ 
+ /* Interface */
+-static unsigned int sfp_get_state(struct sfp *sfp)
++static int sfp_read(struct sfp *sfp, bool a2, u8 addr, void *buf, size_t len)
+ {
+-	return sfp->get_state(sfp);
++	return sfp->read(sfp, a2, addr, buf, len);
+ }
+ 
+-static void sfp_set_state(struct sfp *sfp, unsigned int state)
++static int sfp_write(struct sfp *sfp, bool a2, u8 addr, void *buf, size_t len)
+ {
+-	sfp->set_state(sfp, state);
++	return sfp->write(sfp, a2, addr, buf, len);
+ }
+ 
+-static int sfp_read(struct sfp *sfp, bool a2, u8 addr, void *buf, size_t len)
++static unsigned int sfp_soft_get_state(struct sfp *sfp)
+ {
+-	return sfp->read(sfp, a2, addr, buf, len);
++	unsigned int state = 0;
++	u8 status;
++
++	if (sfp_read(sfp, true, SFP_STATUS, &status, sizeof(status)) ==
++		     sizeof(status)) {
++		if (status & SFP_STATUS_RX_LOS)
++			state |= SFP_F_LOS;
++		if (status & SFP_STATUS_TX_FAULT)
++			state |= SFP_F_TX_FAULT;
++	}
++
++	return state & sfp->state_soft_mask;
+ }
+ 
+-static int sfp_write(struct sfp *sfp, bool a2, u8 addr, void *buf, size_t len)
++static void sfp_soft_set_state(struct sfp *sfp, unsigned int state)
+ {
+-	return sfp->write(sfp, a2, addr, buf, len);
++	u8 status;
++
++	if (sfp_read(sfp, true, SFP_STATUS, &status, sizeof(status)) ==
++		     sizeof(status)) {
++		if (state & SFP_F_TX_DISABLE)
++			status |= SFP_STATUS_TX_DISABLE_FORCE;
++		else
++			status &= ~SFP_STATUS_TX_DISABLE_FORCE;
++
++		sfp_write(sfp, true, SFP_STATUS, &status, sizeof(status));
++	}
++}
++
++static void sfp_soft_start_poll(struct sfp *sfp)
++{
++	const struct sfp_eeprom_id *id = &sfp->id;
++
++	sfp->state_soft_mask = 0;
++	if (id->ext.enhopts & SFP_ENHOPTS_SOFT_TX_DISABLE &&
++	    !sfp->gpio[GPIO_TX_DISABLE])
++		sfp->state_soft_mask |= SFP_F_TX_DISABLE;
++	if (id->ext.enhopts & SFP_ENHOPTS_SOFT_TX_FAULT &&
++	    !sfp->gpio[GPIO_TX_FAULT])
++		sfp->state_soft_mask |= SFP_F_TX_FAULT;
++	if (id->ext.enhopts & SFP_ENHOPTS_SOFT_RX_LOS &&
++	    !sfp->gpio[GPIO_LOS])
++		sfp->state_soft_mask |= SFP_F_LOS;
++
++	if (sfp->state_soft_mask & (SFP_F_LOS | SFP_F_TX_FAULT) &&
++	    !sfp->need_poll)
++		mod_delayed_work(system_wq, &sfp->poll, poll_jiffies);
++}
++
++static void sfp_soft_stop_poll(struct sfp *sfp)
++{
++	sfp->state_soft_mask = 0;
++}
++
++static unsigned int sfp_get_state(struct sfp *sfp)
++{
++	unsigned int state = sfp->get_state(sfp);
++
++	if (state & SFP_F_PRESENT &&
++	    sfp->state_soft_mask & (SFP_F_LOS | SFP_F_TX_FAULT))
++		state |= sfp_soft_get_state(sfp);
++
++	return state;
++}
++
++static void sfp_set_state(struct sfp *sfp, unsigned int state)
++{
++	sfp->set_state(sfp, state);
++
++	if (state & SFP_F_PRESENT &&
++	    sfp->state_soft_mask & SFP_F_TX_DISABLE)
++		sfp_soft_set_state(sfp, state);
+ }
+ 
+ static unsigned int sfp_check(void *buf, size_t len)
+@@ -1342,11 +1411,6 @@ static void sfp_sm_fault(struct sfp *sfp
+ 	}
+ }
+ 
+-static void sfp_sm_mod_init(struct sfp *sfp)
+-{
+-	sfp_module_tx_enable(sfp);
+-}
+-
+ static void sfp_sm_probe_for_phy(struct sfp *sfp)
+ {
+ 	/* Setting the serdes link mode is guesswork: there's no
+@@ -1509,7 +1573,7 @@ static int sfp_sm_mod_probe(struct sfp *
+ 		 (int)sizeof(id.ext.datecode), id.ext.datecode);
+ 
+ 	/* Check whether we support this module */
+-	if (!sfp->type->module_supported(&sfp->id)) {
++	if (!sfp->type->module_supported(&id)) {
+ 		dev_err(sfp->dev,
+ 			"module is not supported - phys id 0x%02x 0x%02x\n",
+ 			sfp->id.base.phys_id, sfp->id.base.phys_ext_id);
+@@ -1699,6 +1763,7 @@ static void sfp_sm_main(struct sfp *sfp,
+ 		if (sfp->mod_phy)
+ 			sfp_sm_phy_detach(sfp);
+ 		sfp_module_tx_disable(sfp);
++		sfp_soft_stop_poll(sfp);
+ 		sfp_sm_next(sfp, SFP_S_DOWN, 0);
+ 		return;
+ 	}
+@@ -1710,7 +1775,10 @@ static void sfp_sm_main(struct sfp *sfp,
+ 		    sfp->sm_dev_state != SFP_DEV_UP)
+ 			break;
+ 
+-		sfp_sm_mod_init(sfp);
++		if (!(sfp->id.ext.diagmon & SFP_DIAGMON_ADDRMODE))
++			sfp_soft_start_poll(sfp);
++
++		sfp_module_tx_enable(sfp);
+ 
+ 		/* Initialise the fault clearance retries */
+ 		sfp->sm_retries = 5;
+@@ -1966,7 +2034,10 @@ static void sfp_poll(struct work_struct
+ 	struct sfp *sfp = container_of(work, struct sfp, poll.work);
+ 
+ 	sfp_check_state(sfp);
+-	mod_delayed_work(system_wq, &sfp->poll, poll_jiffies);
++
++	if (sfp->state_soft_mask & (SFP_F_LOS | SFP_F_TX_FAULT) ||
++	    sfp->need_poll)
++		mod_delayed_work(system_wq, &sfp->poll, poll_jiffies);
+ }
+ 
+ static struct sfp *sfp_alloc(struct device *dev)
+@@ -2010,7 +2081,6 @@ static int sfp_probe(struct platform_dev
+ {
+ 	const struct sff_data *sff;
+ 	struct sfp *sfp;
+-	bool poll = false;
+ 	int err, i;
+ 
+ 	sfp = sfp_alloc(&pdev->dev);
+@@ -2100,7 +2170,7 @@ static int sfp_probe(struct platform_dev
+ 
+ 		sfp->gpio_irq[i] = gpiod_to_irq(sfp->gpio[i]);
+ 		if (!sfp->gpio_irq[i]) {
+-			poll = true;
++			sfp->need_poll = true;
+ 			continue;
+ 		}
+ 
+@@ -2112,11 +2182,11 @@ static int sfp_probe(struct platform_dev
+ 						dev_name(sfp->dev), sfp);
+ 		if (err) {
+ 			sfp->gpio_irq[i] = 0;
+-			poll = true;
++			sfp->need_poll = true;
+ 		}
+ 	}
+ 
+-	if (poll)
++	if (sfp->need_poll)
+ 		mod_delayed_work(system_wq, &sfp->poll, poll_jiffies);
+ 
+ 	/* We could have an issue in cases no Tx disable pin is available or
+--- a/include/linux/sfp.h
++++ b/include/linux/sfp.h
+@@ -428,6 +428,10 @@ enum {
+ 	SFP_TEC_CUR			= 0x6c,
+ 
+ 	SFP_STATUS			= 0x6e,
++	SFP_STATUS_TX_DISABLE		= BIT(7),
++	SFP_STATUS_TX_DISABLE_FORCE	= BIT(6),
++	SFP_STATUS_TX_FAULT		= BIT(2),
++	SFP_STATUS_RX_LOS		= BIT(1),
+ 	SFP_ALARM0			= 0x70,
+ 	SFP_ALARM0_TEMP_HIGH		= BIT(7),
+ 	SFP_ALARM0_TEMP_LOW		= BIT(6),
diff --git a/target/linux/generic/config-5.4 b/target/linux/generic/config-5.4
new file mode 100644
index 0000000000..6cb4f927a0
--- /dev/null
+++ b/target/linux/generic/config-5.4
@@ -0,0 +1,6101 @@
+# CONFIG_104_QUAD_8 is not set
+CONFIG_32BIT=y
+# CONFIG_6LOWPAN is not set
+# CONFIG_6LOWPAN_DEBUGFS is not set
+# CONFIG_6PACK is not set
+# CONFIG_8139CP is not set
+# CONFIG_8139TOO is not set
+# CONFIG_9P_FS is not set
+# CONFIG_AB3100_CORE is not set
+# CONFIG_AB8500_CORE is not set
+# CONFIG_ABP060MG is not set
+# CONFIG_ABX500_CORE is not set
+# CONFIG_ACCESSIBILITY is not set
+# CONFIG_ACENIC is not set
+# CONFIG_ACERHDF is not set
+# CONFIG_ACER_WIRELESS is not set
+# CONFIG_ACORN_PARTITION is not set
+# CONFIG_ACPI_ALS is not set
+# CONFIG_ACPI_APEI is not set
+# CONFIG_ACPI_BUTTON is not set
+# CONFIG_ACPI_CONFIGFS is not set
+# CONFIG_ACPI_CUSTOM_METHOD is not set
+# CONFIG_ACPI_EXTLOG is not set
+# CONFIG_ACPI_HED is not set
+# CONFIG_ACPI_NFIT is not set
+# CONFIG_ACPI_REDUCED_HARDWARE_ONLY is not set
+# CONFIG_ACPI_TABLE_UPGRADE is not set
+# CONFIG_ACPI_VIDEO is not set
+# CONFIG_AD2S1200 is not set
+# CONFIG_AD2S1210 is not set
+# CONFIG_AD2S90 is not set
+# CONFIG_AD5064 is not set
+# CONFIG_AD525X_DPOT is not set
+# CONFIG_AD5272 is not set
+# CONFIG_AD5360 is not set
+# CONFIG_AD5380 is not set
+# CONFIG_AD5421 is not set
+# CONFIG_AD5446 is not set
+# CONFIG_AD5449 is not set
+# CONFIG_AD5504 is not set
+# CONFIG_AD5592R is not set
+# CONFIG_AD5593R is not set
+# CONFIG_AD5624R_SPI is not set
+# CONFIG_AD5686 is not set
+# CONFIG_AD5686_SPI is not set
+# CONFIG_AD5696_I2C is not set
+# CONFIG_AD5755 is not set
+# CONFIG_AD5758 is not set
+# CONFIG_AD5761 is not set
+# CONFIG_AD5764 is not set
+# CONFIG_AD5791 is not set
+# CONFIG_AD5933 is not set
+# CONFIG_AD7150 is not set
+# CONFIG_AD7152 is not set
+# CONFIG_AD7192 is not set
+# CONFIG_AD7266 is not set
+# CONFIG_AD7280 is not set
+# CONFIG_AD7291 is not set
+# CONFIG_AD7298 is not set
+# CONFIG_AD7303 is not set
+# CONFIG_AD7476 is not set
+# CONFIG_AD7606 is not set
+# CONFIG_AD7746 is not set
+# CONFIG_AD7766 is not set
+# CONFIG_AD7780 is not set
+# CONFIG_AD7791 is not set
+# CONFIG_AD7793 is not set
+# CONFIG_AD7816 is not set
+# CONFIG_AD7887 is not set
+# CONFIG_AD7923 is not set
+# CONFIG_AD799X is not set
+# CONFIG_AD8366 is not set
+# CONFIG_AD8801 is not set
+# CONFIG_AD9523 is not set
+# CONFIG_AD9832 is not set
+# CONFIG_AD9834 is not set
+# CONFIG_ADAPTEC_STARFIRE is not set
+# CONFIG_ADE7753 is not set
+# CONFIG_ADE7754 is not set
+# CONFIG_ADE7758 is not set
+# CONFIG_ADE7759 is not set
+# CONFIG_ADE7854 is not set
+# CONFIG_ADF4350 is not set
+# CONFIG_ADFS_FS is not set
+# CONFIG_ADIS16060 is not set
+# CONFIG_ADIS16080 is not set
+# CONFIG_ADIS16130 is not set
+# CONFIG_ADIS16136 is not set
+# CONFIG_ADIS16201 is not set
+# CONFIG_ADIS16203 is not set
+# CONFIG_ADIS16204 is not set
+# CONFIG_ADIS16209 is not set
+# CONFIG_ADIS16220 is not set
+# CONFIG_ADIS16240 is not set
+# CONFIG_ADIS16260 is not set
+# CONFIG_ADIS16400 is not set
+# CONFIG_ADIS16480 is not set
+# CONFIG_ADJD_S311 is not set
+# CONFIG_ADM6996_PHY is not set
+# CONFIG_ADM8211 is not set
+# CONFIG_ADT7316 is not set
+CONFIG_ADVISE_SYSCALLS=y
+# CONFIG_ADXL345_I2C is not set
+# CONFIG_ADXL345_SPI is not set
+# CONFIG_ADXRS450 is not set
+CONFIG_AEABI=y
+# CONFIG_AFE4403 is not set
+# CONFIG_AFE4404 is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_AFS_FS is not set
+# CONFIG_AF_KCM is not set
+# CONFIG_AF_RXRPC is not set
+# CONFIG_AF_RXRPC_INJECT_LOSS is not set
+# CONFIG_AF_RXRPC_IPV6 is not set
+# CONFIG_AGP is not set
+# CONFIG_AHCI_CEVA is not set
+# CONFIG_AHCI_IMX is not set
+# CONFIG_AHCI_MVEBU is not set
+# CONFIG_AHCI_QORIQ is not set
+CONFIG_AIO=y
+# CONFIG_AIRO is not set
+# CONFIG_AIRO_CS is not set
+# CONFIG_AIX_PARTITION is not set
+# CONFIG_AK09911 is not set
+# CONFIG_AK8974 is not set
+# CONFIG_AK8975 is not set
+# CONFIG_AL3320A is not set
+# CONFIG_ALIM7101_WDT is not set
+CONFIG_ALLOW_DEV_COREDUMP=y
+# CONFIG_ALTERA_MBOX is not set
+# CONFIG_ALTERA_MSGDMA is not set
+# CONFIG_ALTERA_STAPL is not set
+# CONFIG_ALTERA_TSE is not set
+# CONFIG_ALX is not set
+# CONFIG_AM2315 is not set
+# CONFIG_AM335X_PHY_USB is not set
+# CONFIG_AMBA_PL08X is not set
+# CONFIG_AMD8111_ETH is not set
+# CONFIG_AMD_MEM_ENCRYPT is not set
+# CONFIG_AMD_PHY is not set
+# CONFIG_AMD_XGBE is not set
+# CONFIG_AMD_XGBE_HAVE_ECC is not set
+# CONFIG_AMIGA_PARTITION is not set
+# CONFIG_AMILO_RFKILL is not set
+# CONFIG_ANDROID is not set
+CONFIG_ANON_INODES=y
+# CONFIG_APDS9300 is not set
+# CONFIG_APDS9802ALS is not set
+# CONFIG_APDS9960 is not set
+# CONFIG_APM8018X is not set
+# CONFIG_APM_EMULATION is not set
+# CONFIG_APPLE_GMUX is not set
+# CONFIG_APPLE_PROPERTIES is not set
+# CONFIG_APPLICOM is not set
+# CONFIG_AQTION is not set
+# CONFIG_AQUANTIA_PHY is not set
+# CONFIG_AR5523 is not set
+# CONFIG_AR7 is not set
+# CONFIG_AR8216_PHY is not set
+# CONFIG_AR8216_PHY_LEDS is not set
+# CONFIG_ARCH_ACTIONS is not set
+# CONFIG_ARCH_ALPINE is not set
+# CONFIG_ARCH_ARTPEC is not set
+# CONFIG_ARCH_ASPEED is not set
+# CONFIG_ARCH_AT91 is not set
+# CONFIG_ARCH_BCM is not set
+# CONFIG_ARCH_BCM2835 is not set
+# CONFIG_ARCH_BCM_21664 is not set
+# CONFIG_ARCH_BCM_23550 is not set
+# CONFIG_ARCH_BCM_281XX is not set
+# CONFIG_ARCH_BCM_5301X is not set
+# CONFIG_ARCH_BCM_53573 is not set
+# CONFIG_ARCH_BCM_63XX is not set
+# CONFIG_ARCH_BCM_CYGNUS is not set
+# CONFIG_ARCH_BCM_IPROC is not set
+# CONFIG_ARCH_BCM_NSP is not set
+# CONFIG_ARCH_BERLIN is not set
+# CONFIG_ARCH_BRCMSTB is not set
+# CONFIG_ARCH_CLPS711X is not set
+# CONFIG_ARCH_CNS3XXX is not set
+# CONFIG_ARCH_DAVINCI is not set
+# CONFIG_ARCH_DIGICOLOR is not set
+# CONFIG_ARCH_DMA_ADDR_T_64BIT is not set
+# CONFIG_ARCH_DOVE is not set
+# CONFIG_ARCH_EBSA110 is not set
+# CONFIG_ARCH_EP93XX is not set
+# CONFIG_ARCH_EXYNOS is not set
+CONFIG_ARCH_FLATMEM_ENABLE=y
+# CONFIG_ARCH_FOOTBRIDGE is not set
+# CONFIG_ARCH_GEMINI is not set
+CONFIG_ARCH_HAS_DEVMEM_IS_ALLOWED=y
+# CONFIG_ARCH_HAS_ILOG2_U32 is not set
+# CONFIG_ARCH_HAS_ILOG2_U64 is not set
+CONFIG_ARCH_HAS_UBSAN_SANITIZE_ALL=y
+# CONFIG_ARCH_HI3xxx is not set
+# CONFIG_ARCH_HIGHBANK is not set
+# CONFIG_ARCH_HISI is not set
+# CONFIG_ARCH_INTEGRATOR is not set
+# CONFIG_ARCH_IOP13XX is not set
+# CONFIG_ARCH_IOP32X is not set
+# CONFIG_ARCH_IOP33X is not set
+# CONFIG_ARCH_IXP4XX is not set
+# CONFIG_ARCH_K3 is not set
+# CONFIG_ARCH_KEYSTONE is not set
+# CONFIG_ARCH_KS8695 is not set
+# CONFIG_ARCH_LAYERSCAPE is not set
+# CONFIG_ARCH_LG1K is not set
+# CONFIG_ARCH_LPC32XX is not set
+# CONFIG_ARCH_MEDIATEK is not set
+# CONFIG_ARCH_MESON is not set
+CONFIG_ARCH_MMAP_RND_BITS=8
+CONFIG_ARCH_MMAP_RND_BITS_MAX=16
+CONFIG_ARCH_MMAP_RND_BITS_MIN=8
+CONFIG_ARCH_MMAP_RND_COMPAT_BITS_MAX=16
+CONFIG_ARCH_MMAP_RND_COMPAT_BITS_MIN=8
+# CONFIG_ARCH_MMP is not set
+# CONFIG_ARCH_MULTIPLATFORM is not set
+# CONFIG_ARCH_MULTI_V6 is not set
+# CONFIG_ARCH_MULTI_V7 is not set
+# CONFIG_ARCH_MV78XX0 is not set
+# CONFIG_ARCH_MVEBU is not set
+# CONFIG_ARCH_MXC is not set
+# CONFIG_ARCH_MXS is not set
+# CONFIG_ARCH_NEEDS_CPU_IDLE_COUPLED is not set
+# CONFIG_ARCH_NETX is not set
+# CONFIG_ARCH_NOMADIK is not set
+# CONFIG_ARCH_NPCM is not set
+# CONFIG_ARCH_NSPIRE is not set
+# CONFIG_ARCH_OMAP is not set
+# CONFIG_ARCH_OMAP1 is not set
+# CONFIG_ARCH_OMAP2 is not set
+# CONFIG_ARCH_OMAP2PLUS is not set
+# CONFIG_ARCH_OMAP3 is not set
+# CONFIG_ARCH_OMAP4 is not set
+# CONFIG_ARCH_ORION5X is not set
+# CONFIG_ARCH_OXNAS is not set
+# CONFIG_ARCH_PHYS_ADDR_T_64BIT is not set
+# CONFIG_ARCH_PICOXCELL is not set
+# CONFIG_ARCH_PRIMA2 is not set
+# CONFIG_ARCH_PXA is not set
+# CONFIG_ARCH_QCOM is not set
+# CONFIG_ARCH_REALTEK is not set
+# CONFIG_ARCH_REALVIEW is not set
+# CONFIG_ARCH_RENESAS is not set
+# CONFIG_ARCH_ROCKCHIP is not set
+# CONFIG_ARCH_RPC is not set
+# CONFIG_ARCH_S3C24XX is not set
+# CONFIG_ARCH_S3C64XX is not set
+# CONFIG_ARCH_S5PV210 is not set
+# CONFIG_ARCH_SA1100 is not set
+# CONFIG_ARCH_SEATTLE is not set
+# CONFIG_ARCH_SHMOBILE is not set
+# CONFIG_ARCH_SHMOBILE_MULTI is not set
+# CONFIG_ARCH_SIRF is not set
+# CONFIG_ARCH_SOCFPGA is not set
+# CONFIG_ARCH_SPRD is not set
+# CONFIG_ARCH_STI is not set
+# CONFIG_ARCH_STM32 is not set
+# CONFIG_ARCH_STRATIX10 is not set
+# CONFIG_ARCH_SUNXI is not set
+# CONFIG_ARCH_SYNQUACER is not set
+# CONFIG_ARCH_TANGO is not set
+# CONFIG_ARCH_TEGRA is not set
+# CONFIG_ARCH_THUNDER is not set
+# CONFIG_ARCH_THUNDER2 is not set
+# CONFIG_ARCH_U300 is not set
+# CONFIG_ARCH_U8500 is not set
+# CONFIG_ARCH_UNIPHIER is not set
+# CONFIG_ARCH_VERSATILE is not set
+# CONFIG_ARCH_VEXPRESS is not set
+# CONFIG_ARCH_VIRT is not set
+# CONFIG_ARCH_VT8500 is not set
+# CONFIG_ARCH_VULCAN is not set
+# CONFIG_ARCH_W90X900 is not set
+# CONFIG_ARCH_WANTS_THP_SWAP is not set
+# CONFIG_ARCH_WANTS_UBSAN_NO_NULL is not set
+# CONFIG_ARCH_WM8505 is not set
+# CONFIG_ARCH_WM8750 is not set
+# CONFIG_ARCH_WM8850 is not set
+# CONFIG_ARCH_XGENE is not set
+# CONFIG_ARCH_ZX is not set
+# CONFIG_ARCH_ZYNQ is not set
+# CONFIG_ARCH_ZYNQMP is not set
+# CONFIG_ARCNET is not set
+# CONFIG_ARC_EMAC is not set
+# CONFIG_ARC_IRQ_NO_AUTOSAVE is not set
+# CONFIG_ARM64_ERRATUM_1024718 is not set
+# CONFIG_ARM64_ERRATUM_1463225 is not set
+# CONFIG_ARM64_ERRATUM_819472 is not set
+# CONFIG_ARM64_ERRATUM_824069 is not set
+# CONFIG_ARM64_ERRATUM_826319 is not set
+# CONFIG_ARM64_ERRATUM_827319 is not set
+# CONFIG_ARM64_ERRATUM_832075 is not set
+# CONFIG_ARM64_ERRATUM_834220 is not set
+# CONFIG_ARM64_ERRATUM_843419 is not set
+# CONFIG_ARM64_ERRATUM_845719 is not set
+# CONFIG_ARM64_ERRATUM_858921 is not set
+# CONFIG_ARM64_RAS_EXTN is not set
+# CONFIG_ARM64_RELOC_TEST is not set
+CONFIG_ARM64_SW_TTBR0_PAN=y
+# CONFIG_ARM_APPENDED_DTB is not set
+# CONFIG_ARM_ARCH_TIMER is not set
+# CONFIG_ARM_BIG_LITTLE_CPUFREQ is not set
+# CONFIG_ARM_CCI is not set
+# CONFIG_ARM_CCI400_PMU is not set
+# CONFIG_ARM_CCI5xx_PMU is not set
+# CONFIG_ARM_CCI_PMU is not set
+# CONFIG_ARM_CCN is not set
+# CONFIG_ARM_CPUIDLE is not set
+CONFIG_ARM_CPU_TOPOLOGY=y
+# CONFIG_ARM_CRYPTO is not set
+CONFIG_ARM_DMA_MEM_BUFFERABLE=y
+# CONFIG_ARM_DSU_PMU is not set
+# CONFIG_ARM_ERRATA_326103 is not set
+# CONFIG_ARM_ERRATA_364296 is not set
+# CONFIG_ARM_ERRATA_411920 is not set
+# CONFIG_ARM_ERRATA_430973 is not set
+# CONFIG_ARM_ERRATA_458693 is not set
+# CONFIG_ARM_ERRATA_460075 is not set
+# CONFIG_ARM_ERRATA_643719 is not set
+# CONFIG_ARM_ERRATA_720789 is not set
+# CONFIG_ARM_ERRATA_742230 is not set
+# CONFIG_ARM_ERRATA_742231 is not set
+# CONFIG_ARM_ERRATA_743622 is not set
+# CONFIG_ARM_ERRATA_751472 is not set
+# CONFIG_ARM_ERRATA_754322 is not set
+# CONFIG_ARM_ERRATA_754327 is not set
+# CONFIG_ARM_ERRATA_764369 is not set
+# CONFIG_ARM_ERRATA_773022 is not set
+# CONFIG_ARM_ERRATA_775420 is not set
+# CONFIG_ARM_ERRATA_798181 is not set
+# CONFIG_ARM_ERRATA_818325_852422 is not set
+# CONFIG_ARM_ERRATA_821420 is not set
+# CONFIG_ARM_ERRATA_825619 is not set
+# CONFIG_ARM_ERRATA_852421 is not set
+# CONFIG_ARM_ERRATA_852423 is not set
+CONFIG_ARM_GIC_MAX_NR=1
+# CONFIG_ARM_KERNMEM_PERMS is not set
+# CONFIG_ARM_KIRKWOOD_CPUFREQ is not set
+# CONFIG_ARM_KPROBES_TEST is not set
+# CONFIG_ARM_MHU is not set
+# CONFIG_ARM_MODULE_PLTS is not set
+# CONFIG_ARM_PATCH_PHYS_VIRT is not set
+# CONFIG_ARM_PSCI is not set
+# CONFIG_ARM_PSCI_CHECKER is not set
+# CONFIG_ARM_PTDUMP is not set
+# CONFIG_ARM_PTDUMP_DEBUGFS is not set
+# CONFIG_ARM_SBSA_WATCHDOG is not set
+# CONFIG_ARM_SCPI_PROTOCOL is not set
+# CONFIG_ARM_SDE_INTERFACE is not set
+# CONFIG_ARM_SPE_PMU is not set
+# CONFIG_ARM_TIMER_SP804 is not set
+# CONFIG_ARM_UNWIND is not set
+# CONFIG_ARM_VIRT_EXT is not set
+# CONFIG_AS3935 is not set
+# CONFIG_ASM9260_TIMER is not set
+# CONFIG_ASUS_LAPTOP is not set
+# CONFIG_ASUS_WIRELESS is not set
+# CONFIG_ASYMMETRIC_KEY_TYPE is not set
+# CONFIG_ASYMMETRIC_PUBLIC_KEY_SUBTYPE is not set
+# CONFIG_ASYNC_RAID6_TEST is not set
+# CONFIG_ASYNC_TX_DMA is not set
+# CONFIG_AT76C50X_USB is not set
+# CONFIG_AT803X_PHY is not set
+# CONFIG_AT91_SAMA5D2_ADC is not set
+# CONFIG_ATA is not set
+# CONFIG_ATAGS is not set
+CONFIG_ATAGS_PROC=y
+# CONFIG_ATALK is not set
+# CONFIG_ATARI_PARTITION is not set
+# CONFIG_ATA_ACPI is not set
+CONFIG_ATA_BMDMA=y
+# CONFIG_ATA_GENERIC is not set
+# CONFIG_ATA_NONSTANDARD is not set
+# CONFIG_ATA_OVER_ETH is not set
+# CONFIG_ATA_PIIX is not set
+CONFIG_ATA_SFF=y
+# CONFIG_ATA_VERBOSE_ERROR is not set
+# CONFIG_ATH10K is not set
+# CONFIG_ATH25 is not set
+# CONFIG_ATH5K is not set
+# CONFIG_ATH6KL is not set
+# CONFIG_ATH79 is not set
+# CONFIG_ATH9K is not set
+# CONFIG_ATH9K_HTC is not set
+# CONFIG_ATH_DEBUG is not set
+# CONFIG_ATL1 is not set
+# CONFIG_ATL1C is not set
+# CONFIG_ATL1E is not set
+# CONFIG_ATL2 is not set
+# CONFIG_ATLAS_PH_SENSOR is not set
+# CONFIG_ATM is not set
+# CONFIG_ATMEL is not set
+# CONFIG_ATMEL_PIT is not set
+# CONFIG_ATMEL_SSC is not set
+# CONFIG_ATM_AMBASSADOR is not set
+# CONFIG_ATM_BR2684 is not set
+CONFIG_ATM_BR2684_IPFILTER=y
+# CONFIG_ATM_CLIP is not set
+CONFIG_ATM_CLIP_NO_ICMP=y
+# CONFIG_ATM_DRIVERS is not set
+# CONFIG_ATM_DUMMY is not set
+# CONFIG_ATM_ENI is not set
+# CONFIG_ATM_FIRESTREAM is not set
+# CONFIG_ATM_FORE200E is not set
+# CONFIG_ATM_HE is not set
+# CONFIG_ATM_HORIZON is not set
+# CONFIG_ATM_IA is not set
+# CONFIG_ATM_IDT77252 is not set
+# CONFIG_ATM_LANAI is not set
+# CONFIG_ATM_LANE is not set
+# CONFIG_ATM_MPOA is not set
+# CONFIG_ATM_NICSTAR is not set
+# CONFIG_ATM_SOLOS is not set
+# CONFIG_ATM_TCP is not set
+# CONFIG_ATM_ZATM is not set
+# CONFIG_ATOMIC64_SELFTEST is not set
+# CONFIG_ATP is not set
+# CONFIG_AUDIT is not set
+# CONFIG_AUDIT_ARCH_COMPAT_GENERIC is not set
+# CONFIG_AURORA_NB8800 is not set
+# CONFIG_AUTOFS4_FS is not set
+# CONFIG_AUTOFS_FS is not set
+# CONFIG_AUTO_ZRELADDR is not set
+# CONFIG_AUXDISPLAY is not set
+# CONFIG_AX25 is not set
+# CONFIG_AX25_DAMA_SLAVE is not set
+# CONFIG_AX88796 is not set
+# CONFIG_AX88796B_PHY is not set
+# CONFIG_AXP20X_ADC is not set
+# CONFIG_AXP20X_POWER is not set
+# CONFIG_AXP288_ADC is not set
+# CONFIG_AXP288_FUEL_GAUGE is not set
+# CONFIG_B43 is not set
+# CONFIG_B43LEGACY is not set
+# CONFIG_B44 is not set
+# CONFIG_B53 is not set
+# CONFIG_BACKLIGHT_ADP8860 is not set
+# CONFIG_BACKLIGHT_ADP8870 is not set
+# CONFIG_BACKLIGHT_APPLE is not set
+# CONFIG_BACKLIGHT_ARCXCNN is not set
+# CONFIG_BACKLIGHT_BD6107 is not set
+# CONFIG_BACKLIGHT_GENERIC is not set
+# CONFIG_BACKLIGHT_GPIO is not set
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+# CONFIG_BACKLIGHT_LM3630A is not set
+# CONFIG_BACKLIGHT_LM3639 is not set
+# CONFIG_BACKLIGHT_LP855X is not set
+# CONFIG_BACKLIGHT_LV5207LP is not set
+# CONFIG_BACKLIGHT_PANDORA is not set
+# CONFIG_BACKLIGHT_PM8941_WLED is not set
+# CONFIG_BACKLIGHT_PWM is not set
+# CONFIG_BACKLIGHT_RPI is not set
+# CONFIG_BACKLIGHT_SAHARA is not set
+# CONFIG_BACKTRACE_SELF_TEST is not set
+CONFIG_BASE_FULL=y
+CONFIG_BASE_SMALL=0
+# CONFIG_BATMAN_ADV is not set
+# CONFIG_BATTERY_BQ27XXX is not set
+# CONFIG_BATTERY_BQ27XXX_HDQ is not set
+# CONFIG_BATTERY_DS2760 is not set
+# CONFIG_BATTERY_DS2780 is not set
+# CONFIG_BATTERY_DS2781 is not set
+# CONFIG_BATTERY_DS2782 is not set
+# CONFIG_BATTERY_GAUGE_LTC2941 is not set
+# CONFIG_BATTERY_GOLDFISH is not set
+# CONFIG_BATTERY_LEGO_EV3 is not set
+# CONFIG_BATTERY_MAX17040 is not set
+# CONFIG_BATTERY_MAX17042 is not set
+# CONFIG_BATTERY_MAX1721X is not set
+# CONFIG_BATTERY_SBS is not set
+# CONFIG_BAYCOM_EPP is not set
+# CONFIG_BAYCOM_PAR is not set
+# CONFIG_BAYCOM_SER_FDX is not set
+# CONFIG_BAYCOM_SER_HDX is not set
+# CONFIG_BCACHE is not set
+# CONFIG_BCM47XX is not set
+# CONFIG_BCM63XX is not set
+# CONFIG_BCM63XX_PHY is not set
+# CONFIG_BCM7038_WDT is not set
+# CONFIG_BCM7XXX_PHY is not set
+# CONFIG_BCM84881_PHY is not set
+# CONFIG_BCM87XX_PHY is not set
+# CONFIG_BCMA is not set
+# CONFIG_BCMA_DRIVER_GPIO is not set
+CONFIG_BCMA_POSSIBLE=y
+# CONFIG_BCMGENET is not set
+# CONFIG_BCM_IPROC_ADC is not set
+# CONFIG_BCM_KONA_USB2_PHY is not set
+# CONFIG_BCM_SBA_RAID is not set
+# CONFIG_BDI_SWITCH is not set
+# CONFIG_BE2ISCSI is not set
+# CONFIG_BE2NET is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_BGMAC is not set
+# CONFIG_BH1750 is not set
+# CONFIG_BH1780 is not set
+# CONFIG_BIG_KEYS is not set
+# CONFIG_BIG_LITTLE is not set
+# CONFIG_BINARY_PRINTF is not set
+# CONFIG_BINFMT_AOUT is not set
+CONFIG_BINFMT_ELF=y
+# CONFIG_BINFMT_ELF_FDPIC is not set
+# CONFIG_BINFMT_FLAT is not set
+# CONFIG_BINFMT_MISC is not set
+CONFIG_BINFMT_SCRIPT=y
+CONFIG_BITREVERSE=y
+# CONFIG_BLK_CGROUP_IOLATENCY is not set
+# CONFIG_BLK_CMDLINE_PARSER is not set
+# CONFIG_BLK_CPQ_CISS_DA is not set
+# CONFIG_BLK_CPQ_DA is not set
+# CONFIG_BLK_DEBUG_FS is not set
+CONFIG_BLK_DEV=y
+# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
+# CONFIG_BLK_DEV_4DRIVES is not set
+# CONFIG_BLK_DEV_AEC62XX is not set
+# CONFIG_BLK_DEV_ALI14XX is not set
+# CONFIG_BLK_DEV_ALI15X3 is not set
+# CONFIG_BLK_DEV_AMD74XX is not set
+# CONFIG_BLK_DEV_ATIIXP is not set
+# CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_BSGLIB is not set
+# CONFIG_BLK_DEV_CMD640 is not set
+# CONFIG_BLK_DEV_CMD64X is not set
+# CONFIG_BLK_DEV_COW_COMMON is not set
+# CONFIG_BLK_DEV_CRYPTOLOOP is not set
+# CONFIG_BLK_DEV_CS5520 is not set
+# CONFIG_BLK_DEV_CS5530 is not set
+# CONFIG_BLK_DEV_CS5535 is not set
+# CONFIG_BLK_DEV_CS5536 is not set
+# CONFIG_BLK_DEV_CY82C693 is not set
+# CONFIG_BLK_DEV_DAC960 is not set
+# CONFIG_BLK_DEV_DELKIN is not set
+# CONFIG_BLK_DEV_DRBD is not set
+# CONFIG_BLK_DEV_DTC2278 is not set
+# CONFIG_BLK_DEV_FD is not set
+# CONFIG_BLK_DEV_GENERIC is not set
+# CONFIG_BLK_DEV_HD is not set
+# CONFIG_BLK_DEV_HPT366 is not set
+# CONFIG_BLK_DEV_HT6560B is not set
+# CONFIG_BLK_DEV_IDEACPI is not set
+# CONFIG_BLK_DEV_IDECD is not set
+# CONFIG_BLK_DEV_IDECS is not set
+# CONFIG_BLK_DEV_IDEPCI is not set
+# CONFIG_BLK_DEV_IDEPNP is not set
+# CONFIG_BLK_DEV_IDETAPE is not set
+# CONFIG_BLK_DEV_IDE_AU1XXX is not set
+# CONFIG_BLK_DEV_IDE_SATA is not set
+CONFIG_BLK_DEV_INITRD=y
+# CONFIG_BLK_DEV_INTEGRITY is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_BLK_DEV_IT8172 is not set
+# CONFIG_BLK_DEV_IT8213 is not set
+# CONFIG_BLK_DEV_IT821X is not set
+# CONFIG_BLK_DEV_JMICRON is not set
+# CONFIG_BLK_DEV_LOOP is not set
+CONFIG_BLK_DEV_LOOP_MIN_COUNT=8
+# CONFIG_BLK_DEV_NBD is not set
+# CONFIG_BLK_DEV_NS87415 is not set
+# CONFIG_BLK_DEV_NULL_BLK is not set
+# CONFIG_BLK_DEV_NVME is not set
+# CONFIG_BLK_DEV_OFFBOARD is not set
+# CONFIG_BLK_DEV_OPTI621 is not set
+# CONFIG_BLK_DEV_PCIESSD_MTIP32XX is not set
+# CONFIG_BLK_DEV_PDC202XX_NEW is not set
+# CONFIG_BLK_DEV_PDC202XX_OLD is not set
+# CONFIG_BLK_DEV_PIIX is not set
+# CONFIG_BLK_DEV_PLATFORM is not set
+# CONFIG_BLK_DEV_PMEM is not set
+# CONFIG_BLK_DEV_QD65XX is not set
+# CONFIG_BLK_DEV_RAM is not set
+# CONFIG_BLK_DEV_RBD is not set
+# CONFIG_BLK_DEV_RSXX is not set
+# CONFIG_BLK_DEV_RZ1000 is not set
+# CONFIG_BLK_DEV_SC1200 is not set
+# CONFIG_BLK_DEV_SD is not set
+# CONFIG_BLK_DEV_SIIMAGE is not set
+# CONFIG_BLK_DEV_SIS5513 is not set
+# CONFIG_BLK_DEV_SKD is not set
+# CONFIG_BLK_DEV_SL82C105 is not set
+# CONFIG_BLK_DEV_SLC90E66 is not set
+# CONFIG_BLK_DEV_SR is not set
+# CONFIG_BLK_DEV_SVWKS is not set
+# CONFIG_BLK_DEV_SX8 is not set
+# CONFIG_BLK_DEV_TC86C001 is not set
+# CONFIG_BLK_DEV_THROTTLING is not set
+# CONFIG_BLK_DEV_TRIFLEX is not set
+# CONFIG_BLK_DEV_TRM290 is not set
+# CONFIG_BLK_DEV_UMC8672 is not set
+# CONFIG_BLK_DEV_UMEM is not set
+# CONFIG_BLK_DEV_VIA82CXXX is not set
+# CONFIG_BLK_DEV_ZONED is not set
+# CONFIG_BLK_SED_OPAL is not set
+# CONFIG_BLK_WBT is not set
+CONFIG_BLOCK=y
+# CONFIG_BMA180 is not set
+# CONFIG_BMA220 is not set
+# CONFIG_BMC150_ACCEL is not set
+# CONFIG_BMC150_MAGN is not set
+# CONFIG_BMC150_MAGN_I2C is not set
+# CONFIG_BMC150_MAGN_SPI is not set
+# CONFIG_BME680 is not set
+# CONFIG_BMG160 is not set
+# CONFIG_BMI160_I2C is not set
+# CONFIG_BMI160_SPI is not set
+# CONFIG_BMIPS_GENERIC is not set
+# CONFIG_BMP085 is not set
+# CONFIG_BMP085_I2C is not set
+# CONFIG_BMP085_SPI is not set
+# CONFIG_BMP280 is not set
+# CONFIG_BNA is not set
+# CONFIG_BNX2 is not set
+# CONFIG_BNX2X is not set
+# CONFIG_BNX2X_SRIOV is not set
+# CONFIG_BNXT is not set
+# CONFIG_BONDING is not set
+# CONFIG_BOOKE_WDT is not set
+CONFIG_BOOKE_WDT_DEFAULT_TIMEOUT=3
+# CONFIG_BOOT_PRINTK_DELAY is not set
+CONFIG_BOOT_RAW=y
+CONFIG_BPF=y
+# CONFIG_BPFILTER is not set
+CONFIG_BPF_JIT=y
+# CONFIG_BPF_JIT_ALWAYS_ON is not set
+# CONFIG_BPF_STREAM_PARSER is not set
+CONFIG_BPF_SYSCALL=y
+# CONFIG_BPQETHER is not set
+CONFIG_BQL=y
+CONFIG_BRANCH_PROFILE_NONE=y
+# CONFIG_BRCMFMAC is not set
+# CONFIG_BRCMSMAC is not set
+# CONFIG_BRCMSTB_GISB_ARB is not set
+CONFIG_BRIDGE=y
+# CONFIG_BRIDGE_EBT_802_3 is not set
+# CONFIG_BRIDGE_EBT_AMONG is not set
+# CONFIG_BRIDGE_EBT_ARP is not set
+# CONFIG_BRIDGE_EBT_ARPREPLY is not set
+# CONFIG_BRIDGE_EBT_BROUTE is not set
+# CONFIG_BRIDGE_EBT_DNAT is not set
+# CONFIG_BRIDGE_EBT_IP is not set
+# CONFIG_BRIDGE_EBT_IP6 is not set
+# CONFIG_BRIDGE_EBT_LIMIT is not set
+# CONFIG_BRIDGE_EBT_LOG is not set
+# CONFIG_BRIDGE_EBT_MARK is not set
+# CONFIG_BRIDGE_EBT_MARK_T is not set
+# CONFIG_BRIDGE_EBT_NFLOG is not set
+# CONFIG_BRIDGE_EBT_PKTTYPE is not set
+# CONFIG_BRIDGE_EBT_REDIRECT is not set
+# CONFIG_BRIDGE_EBT_SNAT is not set
+# CONFIG_BRIDGE_EBT_STP is not set
+# CONFIG_BRIDGE_EBT_T_FILTER is not set
+# CONFIG_BRIDGE_EBT_T_NAT is not set
+# CONFIG_BRIDGE_EBT_VLAN is not set
+CONFIG_BRIDGE_IGMP_SNOOPING=y
+# CONFIG_BRIDGE_NETFILTER is not set
+# CONFIG_BRIDGE_NF_EBTABLES is not set
+CONFIG_BRIDGE_VLAN_FILTERING=y
+# CONFIG_BROADCOM_PHY is not set
+CONFIG_BROKEN_ON_SMP=y
+# CONFIG_BSD_DISKLABEL is not set
+# CONFIG_BSD_PROCESS_ACCT is not set
+# CONFIG_BSD_PROCESS_ACCT_V3 is not set
+# CONFIG_BT is not set
+# CONFIG_BTRFS_ASSERT is not set
+# CONFIG_BTRFS_DEBUG is not set
+# CONFIG_BTRFS_FS is not set
+# CONFIG_BTRFS_FS_POSIX_ACL is not set
+# CONFIG_BTRFS_FS_REF_VERIFY is not set
+# CONFIG_BTRFS_FS_RUN_SANITY_TESTS is not set
+# CONFIG_BT_ATH3K is not set
+# CONFIG_BT_BNEP is not set
+CONFIG_BT_BNEP_MC_FILTER=y
+CONFIG_BT_BNEP_PROTO_FILTER=y
+# CONFIG_BT_BREDR is not set
+# CONFIG_BT_CMTP is not set
+# CONFIG_BT_HCIBCM203X is not set
+# CONFIG_BT_HCIBFUSB is not set
+# CONFIG_BT_HCIBLUECARD is not set
+# CONFIG_BT_HCIBPA10X is not set
+# CONFIG_BT_HCIBT3C is not set
+# CONFIG_BT_HCIBTSDIO is not set
+# CONFIG_BT_HCIBTUART is not set
+# CONFIG_BT_HCIBTUSB is not set
+# CONFIG_BT_HCIBTUSB_AUTOSUSPEND is not set
+# CONFIG_BT_HCIBTUSB_RTL is not set
+# CONFIG_BT_HCIDTL1 is not set
+# CONFIG_BT_HCIUART is not set
+# CONFIG_BT_HCIUART_3WIRE is not set
+# CONFIG_BT_HCIUART_AG6XX is not set
+# CONFIG_BT_HCIUART_ATH3K is not set
+CONFIG_BT_HCIUART_BCSP=y
+CONFIG_BT_HCIUART_H4=y
+# CONFIG_BT_HCIUART_LL is not set
+# CONFIG_BT_HCIUART_MRVL is not set
+# CONFIG_BT_HCIUART_QCA is not set
+# CONFIG_BT_HCIVHCI is not set
+# CONFIG_BT_HIDP is not set
+# CONFIG_BT_HS is not set
+# CONFIG_BT_LE is not set
+# CONFIG_BT_LEDS is not set
+# CONFIG_BT_MRVL is not set
+# CONFIG_BT_MTKUART is not set
+# CONFIG_BT_RFCOMM is not set
+CONFIG_BT_RFCOMM_TTY=y
+# CONFIG_BT_SELFTEST is not set
+CONFIG_BUG=y
+# CONFIG_BUG_ON_DATA_CORRUPTION is not set
+CONFIG_BUILDTIME_EXTABLE_SORT=y
+# CONFIG_BUILD_BIN2C is not set
+CONFIG_BUILD_SALT=""
+# CONFIG_C2PORT is not set
+CONFIG_CACHE_L2X0_PMU=y
+# CONFIG_CADENCE_WATCHDOG is not set
+# CONFIG_CAIF is not set
+# CONFIG_CAN is not set
+# CONFIG_CAN_BCM is not set
+# CONFIG_CAN_DEBUG_DEVICES is not set
+# CONFIG_CAN_DEV is not set
+# CONFIG_CAN_GS_USB is not set
+# CONFIG_CAN_GW is not set
+# CONFIG_CAN_HI311X is not set
+# CONFIG_CAN_IFI_CANFD is not set
+# CONFIG_CAN_MCBA_USB is not set
+# CONFIG_CAN_M_CAN is not set
+# CONFIG_CAN_PEAK_PCIEFD is not set
+# CONFIG_CAN_RAW is not set
+# CONFIG_CAN_RCAR is not set
+# CONFIG_CAN_RCAR_CANFD is not set
+# CONFIG_CAN_SLCAN is not set
+# CONFIG_CAN_SUN4I is not set
+# CONFIG_CAN_UCAN is not set
+# CONFIG_CAN_VCAN is not set
+# CONFIG_CAN_VXCAN is not set
+# CONFIG_CAPI_AVM is not set
+# CONFIG_CAPI_EICON is not set
+# CONFIG_CAPI_TRACE is not set
+CONFIG_CARDBUS=y
+# CONFIG_CARDMAN_4000 is not set
+# CONFIG_CARDMAN_4040 is not set
+# CONFIG_CARL9170 is not set
+# CONFIG_CASSINI is not set
+# CONFIG_CAVIUM_CPT is not set
+# CONFIG_CAVIUM_ERRATUM_22375 is not set
+# CONFIG_CAVIUM_ERRATUM_23144 is not set
+# CONFIG_CAVIUM_ERRATUM_23154 is not set
+# CONFIG_CAVIUM_ERRATUM_27456 is not set
+# CONFIG_CAVIUM_ERRATUM_30115 is not set
+# CONFIG_CAVIUM_OCTEON_SOC is not set
+# CONFIG_CAVIUM_PTP is not set
+# CONFIG_CB710_CORE is not set
+# CONFIG_CC10001_ADC is not set
+# CONFIG_CCS811 is not set
+CONFIG_CC_HAS_SANCOV_TRACE_PC=y
+CONFIG_CC_HAS_STACKPROTECTOR_NONE=y
+CONFIG_CC_OPTIMIZE_FOR_PERFORMANCE=y
+# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
+# CONFIG_CDROM_PKTCDVD is not set
+# CONFIG_CEPH_FS is not set
+# CONFIG_CEPH_LIB is not set
+# CONFIG_CFG80211 is not set
+# CONFIG_CFG80211_CERTIFICATION_ONUS is not set
+# CONFIG_CGROUPS is not set
+# CONFIG_CGROUP_BPF is not set
+# CONFIG_CGROUP_DEBUG is not set
+# CONFIG_CGROUP_NET_CLASSID is not set
+# CONFIG_CGROUP_NET_PRIO is not set
+# CONFIG_CGROUP_RDMA is not set
+# CONFIG_CHARGER_ADP5061 is not set
+# CONFIG_CHARGER_BQ2415X is not set
+# CONFIG_CHARGER_BQ24190 is not set
+# CONFIG_CHARGER_BQ24257 is not set
+# CONFIG_CHARGER_BQ24735 is not set
+# CONFIG_CHARGER_BQ25890 is not set
+# CONFIG_CHARGER_DETECTOR_MAX14656 is not set
+# CONFIG_CHARGER_GPIO is not set
+# CONFIG_CHARGER_ISP1704 is not set
+# CONFIG_CHARGER_LP8727 is not set
+# CONFIG_CHARGER_LTC3651 is not set
+# CONFIG_CHARGER_MANAGER is not set
+# CONFIG_CHARGER_MAX8903 is not set
+# CONFIG_CHARGER_RT9455 is not set
+# CONFIG_CHARGER_SBS is not set
+# CONFIG_CHARGER_SMB347 is not set
+# CONFIG_CHARGER_TWL4030 is not set
+# CONFIG_CHASH_SELFTEST is not set
+# CONFIG_CHASH_STATS is not set
+# CONFIG_CHECKPOINT_RESTORE is not set
+# CONFIG_CHELSIO_T1 is not set
+# CONFIG_CHELSIO_T3 is not set
+# CONFIG_CHELSIO_T4 is not set
+# CONFIG_CHELSIO_T4VF is not set
+# CONFIG_CHROME_PLATFORMS is not set
+# CONFIG_CHR_DEV_OSST is not set
+# CONFIG_CHR_DEV_SCH is not set
+# CONFIG_CHR_DEV_SG is not set
+# CONFIG_CHR_DEV_ST is not set
+# CONFIG_CICADA_PHY is not set
+# CONFIG_CIFS is not set
+# CONFIG_CIFS_ACL is not set
+CONFIG_CIFS_ALLOW_INSECURE_LEGACY=y
+# CONFIG_CIFS_DEBUG is not set
+# CONFIG_CIFS_DEBUG2 is not set
+# CONFIG_CIFS_FSCACHE is not set
+# CONFIG_CIFS_NFSD_EXPORT is not set
+CONFIG_CIFS_POSIX=y
+# CONFIG_CIFS_SMB2 is not set
+CONFIG_CIFS_STATS=y
+# CONFIG_CIFS_STATS2 is not set
+# CONFIG_CIFS_WEAK_PW_HASH is not set
+# CONFIG_CIFS_XATTR is not set
+# CONFIG_CIO_DAC is not set
+CONFIG_CLANG_VERSION=0
+# CONFIG_CLEANCACHE is not set
+# CONFIG_CLKSRC_VERSATILE is not set
+# CONFIG_CLK_HSDK is not set
+# CONFIG_CLK_QORIQ is not set
+# CONFIG_CLOCK_THERMAL is not set
+CONFIG_CLS_U32_MARK=y
+# CONFIG_CLS_U32_PERF is not set
+# CONFIG_CM32181 is not set
+# CONFIG_CM3232 is not set
+# CONFIG_CM3323 is not set
+# CONFIG_CM3605 is not set
+# CONFIG_CM36651 is not set
+# CONFIG_CMA is not set
+CONFIG_CMDLINE=""
+# CONFIG_CMDLINE_BOOL is not set
+# CONFIG_CMDLINE_EXTEND is not set
+# CONFIG_CMDLINE_FORCE is not set
+# CONFIG_CMDLINE_FROM_BOOTLOADER is not set
+# CONFIG_CMDLINE_PARTITION is not set
+# CONFIG_CNIC is not set
+# CONFIG_CODA_FS is not set
+# CONFIG_CODE_PATCHING_SELFTEST is not set
+# CONFIG_COMEDI is not set
+# CONFIG_COMMON_CLK_CDCE706 is not set
+# CONFIG_COMMON_CLK_CDCE925 is not set
+# CONFIG_COMMON_CLK_CS2000_CP is not set
+# CONFIG_COMMON_CLK_IPROC is not set
+# CONFIG_COMMON_CLK_MAX9485 is not set
+# CONFIG_COMMON_CLK_NXP is not set
+# CONFIG_COMMON_CLK_PIC32 is not set
+# CONFIG_COMMON_CLK_PWM is not set
+# CONFIG_COMMON_CLK_PXA is not set
+# CONFIG_COMMON_CLK_QCOM is not set
+# CONFIG_COMMON_CLK_SI514 is not set
+# CONFIG_COMMON_CLK_SI5351 is not set
+# CONFIG_COMMON_CLK_SI544 is not set
+# CONFIG_COMMON_CLK_SI570 is not set
+# CONFIG_COMMON_CLK_VC5 is not set
+# CONFIG_COMMON_CLK_VERSATILE is not set
+# CONFIG_COMMON_CLK_XGENE is not set
+# CONFIG_COMMON_CLK_XLNX_CLKWZRD is not set
+CONFIG_COMPACTION=y
+# CONFIG_COMPAL_LAPTOP is not set
+# CONFIG_COMPAT is not set
+# CONFIG_COMPAT_BRK is not set
+# CONFIG_COMPILE_TEST is not set
+# CONFIG_CONFIGFS_FS is not set
+# CONFIG_CONFIG_KVM_AMD_SEV is not set
+# CONFIG_CONNECTOR is not set
+CONFIG_CONSOLE_LOGLEVEL_DEFAULT=7
+CONFIG_CONSOLE_LOGLEVEL_QUIET=4
+CONFIG_CONSTRUCTORS=y
+# CONFIG_CONTEXT_SWITCH_TRACER is not set
+# CONFIG_COPS is not set
+# CONFIG_CORDIC is not set
+# CONFIG_COREDUMP is not set
+# CONFIG_CORESIGHT is not set
+# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
+# CONFIG_CORTINA_PHY is not set
+# CONFIG_CPA_DEBUG is not set
+# CONFIG_CPU_DCACHE_DISABLE is not set
+# CONFIG_CPU_FREQ is not set
+# CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE is not set
+# CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND is not set
+# CONFIG_CPU_FREQ_DEFAULT_GOV_POWERSAVE is not set
+# CONFIG_CPU_FREQ_DEFAULT_GOV_SCHEDUTIL is not set
+# CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set
+# CONFIG_CPU_FREQ_GOV_SCHEDUTIL is not set
+# CONFIG_CPU_FREQ_STAT_DETAILS is not set
+# CONFIG_CPU_IDLE is not set
+# CONFIG_CPU_IDLE_GOV_MENU is not set
+# CONFIG_CPU_IDLE_MULTIPLE_DRIVERS is not set
+# CONFIG_CPU_ISOLATION is not set
+# CONFIG_CPU_NO_EFFICIENT_FFS is not set
+CONFIG_CPU_SW_DOMAIN_PAN=y
+# CONFIG_CRAMFS is not set
+CONFIG_CRAMFS_BLOCKDEV=y
+# CONFIG_CRAMFS_MTD is not set
+CONFIG_CRASHLOG=y
+# CONFIG_CRASH_DUMP is not set
+# CONFIG_CRC16 is not set
+CONFIG_CRC32=y
+# CONFIG_CRC32_BIT is not set
+CONFIG_CRC32_SARWATE=y
+# CONFIG_CRC32_SELFTEST is not set
+# CONFIG_CRC32_SLICEBY4 is not set
+# CONFIG_CRC32_SLICEBY8 is not set
+# CONFIG_CRC4 is not set
+# CONFIG_CRC64 is not set
+# CONFIG_CRC7 is not set
+# CONFIG_CRC8 is not set
+# CONFIG_CRC_CCITT is not set
+# CONFIG_CRC_ITU_T is not set
+# CONFIG_CRC_T10DIF is not set
+CONFIG_CROSS_COMPILE=""
+# CONFIG_CROSS_MEMORY_ATTACH is not set
+CONFIG_CRYPTO=y
+# CONFIG_CRYPTO_842 is not set
+# CONFIG_CRYPTO_AEAD is not set
+# CONFIG_CRYPTO_AEGIS128 is not set
+# CONFIG_CRYPTO_AEGIS128L is not set
+# CONFIG_CRYPTO_AEGIS128L_AESNI_SSE2 is not set
+# CONFIG_CRYPTO_AEGIS128_AESNI_SSE2 is not set
+# CONFIG_CRYPTO_AEGIS256 is not set
+# CONFIG_CRYPTO_AEGIS256_AESNI_SSE2 is not set
+CONFIG_CRYPTO_AES=y
+# CONFIG_CRYPTO_AES_586 is not set
+# CONFIG_CRYPTO_AES_ARM is not set
+# CONFIG_CRYPTO_AES_ARM_BS is not set
+# CONFIG_CRYPTO_AES_NI_INTEL is not set
+# CONFIG_CRYPTO_AES_TI is not set
+CONFIG_CRYPTO_ALGAPI=y
+CONFIG_CRYPTO_ALGAPI2=y
+# CONFIG_CRYPTO_ANSI_CPRNG is not set
+# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_ARC4 is not set
+# CONFIG_CRYPTO_AUTHENC is not set
+CONFIG_CRYPTO_BLKCIPHER=y
+CONFIG_CRYPTO_BLKCIPHER2=y
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_CAMELLIA is not set
+# CONFIG_CRYPTO_CAST5 is not set
+# CONFIG_CRYPTO_CAST6 is not set
+# CONFIG_CRYPTO_CBC is not set
+# CONFIG_CRYPTO_CCM is not set
+# CONFIG_CRYPTO_CFB is not set
+# CONFIG_CRYPTO_CHACHA20 is not set
+# CONFIG_CRYPTO_CHACHA20POLY1305 is not set
+# CONFIG_CRYPTO_CMAC is not set
+# CONFIG_CRYPTO_CRC32 is not set
+# CONFIG_CRYPTO_CRC32C is not set
+# CONFIG_CRYPTO_CRC32C_INTEL is not set
+# CONFIG_CRYPTO_CRCT10DIF is not set
+# CONFIG_CRYPTO_CRYPTD is not set
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_CTS is not set
+# CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_DES is not set
+# CONFIG_CRYPTO_DEV_ATMEL_AES is not set
+# CONFIG_CRYPTO_DEV_ATMEL_AUTHENC is not set
+# CONFIG_CRYPTO_DEV_ATMEL_ECC is not set
+# CONFIG_CRYPTO_DEV_ATMEL_SHA is not set
+# CONFIG_CRYPTO_DEV_ATMEL_TDES is not set
+# CONFIG_CRYPTO_DEV_CAVIUM_ZIP is not set
+# CONFIG_CRYPTO_DEV_CCP is not set
+# CONFIG_CRYPTO_DEV_CCREE is not set
+# CONFIG_CRYPTO_DEV_FSL_CAAM is not set
+# CONFIG_CRYPTO_DEV_FSL_CAAM_CRYPTO_API_DESC is not set
+# CONFIG_CRYPTO_DEV_HIFN_795X is not set
+# CONFIG_CRYPTO_DEV_HISI_SEC is not set
+# CONFIG_CRYPTO_DEV_IMGTEC_HASH is not set
+# CONFIG_CRYPTO_DEV_MARVELL_CESA is not set
+# CONFIG_CRYPTO_DEV_MV_CESA is not set
+# CONFIG_CRYPTO_DEV_MXC_SCC is not set
+# CONFIG_CRYPTO_DEV_MXS_DCP is not set
+# CONFIG_CRYPTO_DEV_NITROX_CNN55XX is not set
+# CONFIG_CRYPTO_DEV_QAT_C3XXX is not set
+# CONFIG_CRYPTO_DEV_QAT_C3XXXVF is not set
+# CONFIG_CRYPTO_DEV_QAT_C62X is not set
+# CONFIG_CRYPTO_DEV_QAT_C62XVF is not set
+# CONFIG_CRYPTO_DEV_QAT_DH895xCC is not set
+# CONFIG_CRYPTO_DEV_QAT_DH895xCCVF is not set
+# CONFIG_CRYPTO_DEV_QCE is not set
+# CONFIG_CRYPTO_DEV_S5P is not set
+# CONFIG_CRYPTO_DEV_SAFEXCEL is not set
+# CONFIG_CRYPTO_DEV_SAHARA is not set
+# CONFIG_CRYPTO_DEV_SP_PSP is not set
+# CONFIG_CRYPTO_DEV_TALITOS is not set
+# CONFIG_CRYPTO_DEV_VIRTIO is not set
+# CONFIG_CRYPTO_DH is not set
+# CONFIG_CRYPTO_DRBG_CTR is not set
+# CONFIG_CRYPTO_DRBG_HASH is not set
+# CONFIG_CRYPTO_DRBG_MENU is not set
+# CONFIG_CRYPTO_ECB is not set
+# CONFIG_CRYPTO_ECDH is not set
+# CONFIG_CRYPTO_ECHAINIV is not set
+# CONFIG_CRYPTO_FCRYPT is not set
+# CONFIG_CRYPTO_FIPS is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_GF128MUL is not set
+# CONFIG_CRYPTO_GHASH is not set
+# CONFIG_CRYPTO_GHASH_CLMUL_NI_INTEL is not set
+# CONFIG_CRYPTO_HASH is not set
+# CONFIG_CRYPTO_HMAC is not set
+# CONFIG_CRYPTO_HW is not set
+# CONFIG_CRYPTO_JITTERENTROPY is not set
+# CONFIG_CRYPTO_KEYWRAP is not set
+# CONFIG_CRYPTO_KHAZAD is not set
+# CONFIG_CRYPTO_LRW is not set
+# CONFIG_CRYPTO_LZ4 is not set
+# CONFIG_CRYPTO_LZ4HC is not set
+# CONFIG_CRYPTO_LZO is not set
+# CONFIG_CRYPTO_MANAGER is not set
+# CONFIG_CRYPTO_MANAGER2 is not set
+CONFIG_CRYPTO_MANAGER_DISABLE_TESTS=y
+# CONFIG_CRYPTO_MCRYPTD is not set
+# CONFIG_CRYPTO_MD4 is not set
+# CONFIG_CRYPTO_MD5 is not set
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_MORUS1280 is not set
+# CONFIG_CRYPTO_MORUS1280_AVX2 is not set
+# CONFIG_CRYPTO_MORUS1280_SSE2 is not set
+# CONFIG_CRYPTO_MORUS640 is not set
+# CONFIG_CRYPTO_MORUS640_SSE2 is not set
+# CONFIG_CRYPTO_NULL is not set
+# CONFIG_CRYPTO_PCBC is not set
+# CONFIG_CRYPTO_PCOMP is not set
+# CONFIG_CRYPTO_PCOMP2 is not set
+CONFIG_CRYPTO_PCRYPT=y
+# CONFIG_CRYPTO_POLY1305 is not set
+# CONFIG_CRYPTO_RMD128 is not set
+# CONFIG_CRYPTO_RMD160 is not set
+# CONFIG_CRYPTO_RMD256 is not set
+# CONFIG_CRYPTO_RMD320 is not set
+# CONFIG_CRYPTO_RNG is not set
+# CONFIG_CRYPTO_RSA is not set
+# CONFIG_CRYPTO_SALSA20 is not set
+# CONFIG_CRYPTO_SALSA20_586 is not set
+# CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_SEQIV is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_SHA1 is not set
+# CONFIG_CRYPTO_SHA1_ARM is not set
+# CONFIG_CRYPTO_SHA256 is not set
+# CONFIG_CRYPTO_SHA3 is not set
+# CONFIG_CRYPTO_SHA512 is not set
+# CONFIG_CRYPTO_SM3 is not set
+# CONFIG_CRYPTO_SM4 is not set
+# CONFIG_CRYPTO_SPECK is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_TEST is not set
+# CONFIG_CRYPTO_TGR192 is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+# CONFIG_CRYPTO_TWOFISH_586 is not set
+# CONFIG_CRYPTO_TWOFISH_COMMON is not set
+# CONFIG_CRYPTO_USER is not set
+# CONFIG_CRYPTO_USER_API_AEAD is not set
+# CONFIG_CRYPTO_USER_API_HASH is not set
+# CONFIG_CRYPTO_USER_API_RNG is not set
+# CONFIG_CRYPTO_USER_API_SKCIPHER is not set
+# CONFIG_CRYPTO_VMAC is not set
+# CONFIG_CRYPTO_WP512 is not set
+# CONFIG_CRYPTO_XCBC is not set
+# CONFIG_CRYPTO_XTS is not set
+# CONFIG_CRYPTO_ZLIB is not set
+# CONFIG_CRYPTO_ZSTD is not set
+# CONFIG_CS5535_MFGPT is not set
+# CONFIG_CS89x0 is not set
+# CONFIG_CUSE is not set
+# CONFIG_CW1200 is not set
+# CONFIG_CXL_AFU_DRIVER_OPS is not set
+# CONFIG_CXL_BASE is not set
+# CONFIG_CXL_EEH is not set
+# CONFIG_CXL_KERNEL_API is not set
+# CONFIG_CXL_LIB is not set
+# CONFIG_CYPRESS_FIRMWARE is not set
+# CONFIG_DA280 is not set
+# CONFIG_DA311 is not set
+# CONFIG_DAVICOM_PHY is not set
+# CONFIG_DAX is not set
+# CONFIG_DCB is not set
+# CONFIG_DDR is not set
+# CONFIG_DEBUG_ALIGN_RODATA is not set
+# CONFIG_DEBUG_ATOMIC_SLEEP is not set
+# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
+# CONFIG_DEBUG_BUGVERBOSE is not set
+# CONFIG_DEBUG_CREDENTIALS is not set
+# CONFIG_DEBUG_DEVRES is not set
+# CONFIG_DEBUG_DRIVER is not set
+# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
+CONFIG_DEBUG_FS=y
+# CONFIG_DEBUG_GPIO is not set
+# CONFIG_DEBUG_HIGHMEM is not set
+# CONFIG_DEBUG_ICEDCC is not set
+# CONFIG_DEBUG_INFO is not set
+# CONFIG_DEBUG_INFO_DWARF4 is not set
+CONFIG_DEBUG_INFO_REDUCED=y
+# CONFIG_DEBUG_INFO_SPLIT is not set
+CONFIG_DEBUG_KERNEL=y
+# CONFIG_DEBUG_KMEMLEAK is not set
+# CONFIG_DEBUG_KOBJECT is not set
+# CONFIG_DEBUG_KOBJECT_RELEASE is not set
+# CONFIG_DEBUG_LIST is not set
+# CONFIG_DEBUG_LL is not set
+# CONFIG_DEBUG_LL_UART_8250 is not set
+# CONFIG_DEBUG_LL_UART_PL01X is not set
+# CONFIG_DEBUG_LOCKDEP is not set
+# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
+# CONFIG_DEBUG_LOCK_ALLOC is not set
+# CONFIG_DEBUG_MEMORY_INIT is not set
+# CONFIG_DEBUG_MUTEXES is not set
+# CONFIG_DEBUG_NOTIFIERS is not set
+# CONFIG_DEBUG_NX_TEST is not set
+# CONFIG_DEBUG_OBJECTS is not set
+# CONFIG_DEBUG_PAGEALLOC is not set
+# CONFIG_DEBUG_PAGE_REF is not set
+# CONFIG_DEBUG_PERF_USE_VMALLOC is not set
+# CONFIG_DEBUG_PER_CPU_MAPS is not set
+# CONFIG_DEBUG_PINCTRL is not set
+# CONFIG_DEBUG_PI_LIST is not set
+# CONFIG_DEBUG_PREEMPT is not set
+# CONFIG_DEBUG_RODATA_TEST is not set
+# CONFIG_DEBUG_RSEQ is not set
+# CONFIG_DEBUG_RT_MUTEXES is not set
+# CONFIG_DEBUG_RWSEMS is not set
+# CONFIG_DEBUG_SECTION_MISMATCH is not set
+# CONFIG_DEBUG_SEMIHOSTING is not set
+# CONFIG_DEBUG_SG is not set
+# CONFIG_DEBUG_SHIRQ is not set
+# CONFIG_DEBUG_SLAB is not set
+# CONFIG_DEBUG_SPINLOCK is not set
+# CONFIG_DEBUG_STACKOVERFLOW is not set
+# CONFIG_DEBUG_STACK_USAGE is not set
+# CONFIG_DEBUG_STRICT_USER_COPY_CHECKS is not set
+# CONFIG_DEBUG_TEST_DRIVER_REMOVE is not set
+# CONFIG_DEBUG_TIMEKEEPING is not set
+# CONFIG_DEBUG_UART_8250_PALMCHIP is not set
+# CONFIG_DEBUG_UART_BCM63XX is not set
+# CONFIG_DEBUG_VIRTUAL is not set
+# CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_WQ_FORCE_RR_CPU is not set
+# CONFIG_DEBUG_WW_MUTEX_SLOWPATH is not set
+# CONFIG_DEBUG_WX is not set
+# CONFIG_DEBUG_ZBOOT is not set
+# CONFIG_DECNET is not set
+CONFIG_DEFAULT_CUBIC=y
+CONFIG_DEFAULT_DEADLINE=y
+CONFIG_DEFAULT_HOSTNAME="(none)"
+CONFIG_DEFAULT_IOSCHED="deadline"
+CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
+# CONFIG_DEFAULT_NOOP is not set
+# CONFIG_DEFAULT_RENO is not set
+CONFIG_DEFAULT_SECURITY=""
+CONFIG_DEFAULT_SECURITY_DAC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+# CONFIG_DEFERRED_STRUCT_PAGE_INIT is not set
+# CONFIG_DELL_LAPTOP is not set
+# CONFIG_DELL_RBTN is not set
+# CONFIG_DELL_SMBIOS is not set
+# CONFIG_DELL_SMO8800 is not set
+# CONFIG_DEPRECATED_PARAM_STRUCT is not set
+# CONFIG_DETECT_HUNG_TASK is not set
+# CONFIG_DEVKMEM is not set
+# CONFIG_DEVMEM is not set
+CONFIG_DEVPORT=y
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
+# CONFIG_DEVTMPFS is not set
+# CONFIG_DEVTMPFS_MOUNT is not set
+# CONFIG_DEV_DAX is not set
+# CONFIG_DGAP is not set
+# CONFIG_DGNC is not set
+# CONFIG_DHT11 is not set
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_DISPLAY_CONNECTOR_ANALOG_TV is not set
+# CONFIG_DISPLAY_CONNECTOR_DVI is not set
+# CONFIG_DISPLAY_CONNECTOR_HDMI is not set
+# CONFIG_DISPLAY_ENCODER_TFP410 is not set
+# CONFIG_DISPLAY_ENCODER_TPD12S015 is not set
+# CONFIG_DISPLAY_PANEL_DPI is not set
+# CONFIG_DISPLAY_PANEL_LGPHILIPS_LB035Q02 is not set
+# CONFIG_DISPLAY_PANEL_TPO_TD028TTEC1 is not set
+# CONFIG_DISPLAY_PANEL_TPO_TD043MTEA1 is not set
+# CONFIG_DL2K is not set
+# CONFIG_DLM is not set
+# CONFIG_DM9000 is not set
+# CONFIG_DMADEVICES is not set
+# CONFIG_DMADEVICES_DEBUG is not set
+# CONFIG_DMARD06 is not set
+# CONFIG_DMARD09 is not set
+# CONFIG_DMARD10 is not set
+# CONFIG_DMASCC is not set
+# CONFIG_DMATEST is not set
+# CONFIG_DMA_API_DEBUG is not set
+# CONFIG_DMA_ENGINE is not set
+# CONFIG_DMA_FENCE_TRACE is not set
+# CONFIG_DMA_JZ4780 is not set
+# CONFIG_DMA_NOOP_OPS is not set
+# CONFIG_DMA_SHARED_BUFFER is not set
+# CONFIG_DMA_VIRT_OPS is not set
+# CONFIG_DM_CACHE is not set
+# CONFIG_DM_DEBUG is not set
+# CONFIG_DM_DELAY is not set
+# CONFIG_DM_ERA is not set
+# CONFIG_DM_FLAKEY is not set
+# CONFIG_DM_INTEGRITY is not set
+# CONFIG_DM_LOG_USERSPACE is not set
+# CONFIG_DM_LOG_WRITES is not set
+# CONFIG_DM_MQ_DEFAULT is not set
+# CONFIG_DM_MULTIPATH is not set
+# CONFIG_DM_RAID is not set
+# CONFIG_DM_SWITCH is not set
+# CONFIG_DM_THIN_PROVISIONING is not set
+# CONFIG_DM_UEVENT is not set
+# CONFIG_DM_UNSTRIPED is not set
+# CONFIG_DM_VERITY is not set
+# CONFIG_DM_WRITECACHE is not set
+# CONFIG_DM_ZERO is not set
+# CONFIG_DNET is not set
+# CONFIG_DNOTIFY is not set
+# CONFIG_DNS_RESOLVER is not set
+CONFIG_DOUBLEFAULT=y
+# CONFIG_DP83822_PHY is not set
+# CONFIG_DP83848_PHY is not set
+# CONFIG_DP83867_PHY is not set
+# CONFIG_DP83TC811_PHY is not set
+# CONFIG_DPOT_DAC is not set
+CONFIG_DQL=y
+# CONFIG_DRAGONRISE_FF is not set
+# CONFIG_DRM is not set
+# CONFIG_DRM_AMDGPU is not set
+# CONFIG_DRM_AMDGPU_CIK is not set
+# CONFIG_DRM_AMDGPU_GART_DEBUGFS is not set
+# CONFIG_DRM_AMDGPU_SI is not set
+# CONFIG_DRM_AMDGPU_USERPTR is not set
+# CONFIG_DRM_AMD_ACP is not set
+# CONFIG_DRM_ANALOGIX_ANX78XX is not set
+# CONFIG_DRM_ARCPGU is not set
+# CONFIG_DRM_ARMADA is not set
+# CONFIG_DRM_AST is not set
+# CONFIG_DRM_BOCHS is not set
+# CONFIG_DRM_CDNS_DSI is not set
+# CONFIG_DRM_CIRRUS_QEMU is not set
+# CONFIG_DRM_DEBUG_MM is not set
+# CONFIG_DRM_DEBUG_SELFTEST is not set
+# CONFIG_DRM_DP_AUX_CHARDEV is not set
+# CONFIG_DRM_DP_CEC is not set
+# CONFIG_DRM_DUMB_VGA_DAC is not set
+# CONFIG_DRM_DW_HDMI_CEC is not set
+# CONFIG_DRM_ETNAVIV is not set
+# CONFIG_DRM_EXYNOS is not set
+# CONFIG_DRM_FBDEV_EMULATION is not set
+# CONFIG_DRM_FBDEV_LEAK_PHYS_SMEM is not set
+# CONFIG_DRM_FSL_DCU is not set
+# CONFIG_DRM_GMA500 is not set
+# CONFIG_DRM_HDLCD is not set
+# CONFIG_DRM_HISI_HIBMC is not set
+# CONFIG_DRM_HISI_KIRIN is not set
+# CONFIG_DRM_I2C_ADV7511 is not set
+# CONFIG_DRM_I2C_CH7006 is not set
+# CONFIG_DRM_I2C_NXP_TDA9950 is not set
+# CONFIG_DRM_I2C_NXP_TDA998X is not set
+# CONFIG_DRM_I2C_SIL164 is not set
+# CONFIG_DRM_I915 is not set
+# CONFIG_DRM_LEGACY is not set
+# CONFIG_DRM_LIB_RANDOM is not set
+# CONFIG_DRM_LOAD_EDID_FIRMWARE is not set
+# CONFIG_DRM_LVDS_ENCODER is not set
+# CONFIG_DRM_MALI_DISPLAY is not set
+# CONFIG_DRM_MEGACHIPS_STDPXXXX_GE_B850V3_FW is not set
+# CONFIG_DRM_MGAG200 is not set
+# CONFIG_DRM_MXSFB is not set
+# CONFIG_DRM_NOUVEAU is not set
+# CONFIG_DRM_NXP_PTN3460 is not set
+# CONFIG_DRM_OMAP is not set
+# CONFIG_DRM_PANEL_ARM_VERSATILE is not set
+# CONFIG_DRM_PANEL_ILITEK_IL9322 is not set
+# CONFIG_DRM_PANEL_ILITEK_ILI9881C is not set
+# CONFIG_DRM_PANEL_INNOLUX_P079ZCA is not set
+# CONFIG_DRM_PANEL_JDI_LT070ME05000 is not set
+# CONFIG_DRM_PANEL_LG_LG4573 is not set
+# CONFIG_DRM_PANEL_LVDS is not set
+# CONFIG_DRM_PANEL_ORISETECH_OTM8009A is not set
+# CONFIG_DRM_PANEL_PANASONIC_VVX10F034N00 is not set
+# CONFIG_DRM_PANEL_RASPBERRYPI_TOUCHSCREEN is not set
+# CONFIG_DRM_PANEL_RAYDIUM_RM68200 is not set
+# CONFIG_DRM_PANEL_SAMSUNG_LD9040 is not set
+# CONFIG_DRM_PANEL_SAMSUNG_S6E3HA2 is not set
+# CONFIG_DRM_PANEL_SAMSUNG_S6E63J0X03 is not set
+# CONFIG_DRM_PANEL_SAMSUNG_S6E8AA0 is not set
+# CONFIG_DRM_PANEL_SEIKO_43WVF1G is not set
+# CONFIG_DRM_PANEL_SHARP_LQ101R1SX01 is not set
+# CONFIG_DRM_PANEL_SHARP_LS043T1LE01 is not set
+# CONFIG_DRM_PANEL_SITRONIX_ST7789V is not set
+# CONFIG_DRM_PARADE_PS8622 is not set
+# CONFIG_DRM_PL111 is not set
+# CONFIG_DRM_QXL is not set
+# CONFIG_DRM_RADEON is not set
+# CONFIG_DRM_RADEON_USERPTR is not set
+# CONFIG_DRM_RCAR_DW_HDMI is not set
+# CONFIG_DRM_RCAR_LVDS is not set
+# CONFIG_DRM_SII902X is not set
+# CONFIG_DRM_SII9234 is not set
+# CONFIG_DRM_SIL_SII8620 is not set
+# CONFIG_DRM_STI is not set
+# CONFIG_DRM_STM is not set
+# CONFIG_DRM_SUN4I is not set
+# CONFIG_DRM_THINE_THC63LVD1024 is not set
+# CONFIG_DRM_TILCDC is not set
+# CONFIG_DRM_TINYDRM is not set
+# CONFIG_DRM_TI_TFP410 is not set
+# CONFIG_DRM_TOSHIBA_TC358767 is not set
+# CONFIG_DRM_UDL is not set
+# CONFIG_DRM_VBOXVIDEO is not set
+# CONFIG_DRM_VGEM is not set
+# CONFIG_DRM_VIRTIO_GPU is not set
+# CONFIG_DRM_VKMS is not set
+# CONFIG_DRM_VMWGFX is not set
+# CONFIG_DRM_XEN is not set
+# CONFIG_DS1682 is not set
+# CONFIG_DS1803 is not set
+# CONFIG_DS4424 is not set
+# CONFIG_DST_CACHE is not set
+# CONFIG_DTLK is not set
+# CONFIG_DUMMY is not set
+CONFIG_DUMMY_CONSOLE_COLUMNS=80
+CONFIG_DUMMY_CONSOLE_ROWS=25
+# CONFIG_DUMMY_IRQ is not set
+# CONFIG_DVB_AU8522_V4L is not set
+# CONFIG_DVB_CORE is not set
+# CONFIG_DVB_DUMMY_FE is not set
+# CONFIG_DVB_TUNER_DIB0070 is not set
+# CONFIG_DVB_TUNER_DIB0090 is not set
+# CONFIG_DWC_XLGMAC is not set
+# CONFIG_DWMAC_IPQ806X is not set
+# CONFIG_DWMAC_LPC18XX is not set
+# CONFIG_DWMAC_MESON is not set
+# CONFIG_DWMAC_ROCKCHIP is not set
+# CONFIG_DWMAC_SOCFPGA is not set
+# CONFIG_DWMAC_STI is not set
+# CONFIG_DW_AXI_DMAC is not set
+# CONFIG_DW_DMAC is not set
+# CONFIG_DW_DMAC_PCI is not set
+# CONFIG_DW_WATCHDOG is not set
+# CONFIG_DYNAMIC_DEBUG is not set
+# CONFIG_E100 is not set
+# CONFIG_E1000 is not set
+# CONFIG_E1000E is not set
+# CONFIG_E1000E_HWTS is not set
+# CONFIG_EARLY_PRINTK_8250 is not set
+# CONFIG_EARLY_PRINTK_USB_XDBC is not set
+# CONFIG_EBC_C384_WDT is not set
+# CONFIG_ECHO is not set
+# CONFIG_ECRYPT_FS is not set
+# CONFIG_EDAC is not set
+# CONFIG_EEEPC_LAPTOP is not set
+# CONFIG_EEPROM_93CX6 is not set
+# CONFIG_EEPROM_93XX46 is not set
+# CONFIG_EEPROM_AT24 is not set
+# CONFIG_EEPROM_AT25 is not set
+# CONFIG_EEPROM_DIGSY_MTC_CFG is not set
+# CONFIG_EEPROM_IDT_89HPESX is not set
+# CONFIG_EEPROM_LEGACY is not set
+# CONFIG_EEPROM_MAX6875 is not set
+# CONFIG_EFI is not set
+CONFIG_EFI_PARTITION=y
+# CONFIG_EFS_FS is not set
+CONFIG_ELFCORE=y
+# CONFIG_ELF_CORE is not set
+# CONFIG_EMAC_ROCKCHIP is not set
+CONFIG_EMBEDDED=y
+# CONFIG_EM_TIMER_STI is not set
+# CONFIG_ENABLE_MUST_CHECK is not set
+CONFIG_ENABLE_WARN_DEPRECATED=y
+# CONFIG_ENA_ETHERNET is not set
+# CONFIG_ENC28J60 is not set
+# CONFIG_ENCLOSURE_SERVICES is not set
+# CONFIG_ENCRYPTED_KEYS is not set
+# CONFIG_ENCX24J600 is not set
+# CONFIG_ENIC is not set
+# CONFIG_ENVELOPE_DETECTOR is not set
+# CONFIG_EPAPR_PARAVIRT is not set
+# CONFIG_EPIC100 is not set
+CONFIG_EPOLL=y
+# CONFIG_EQUALIZER is not set
+# CONFIG_EROFS_FS is not set
+# CONFIG_ET131X is not set
+CONFIG_ETHERNET=y
+# CONFIG_ETHOC is not set
+CONFIG_EVENTFD=y
+CONFIG_EXPERT=y
+CONFIG_EXPORTFS=y
+# CONFIG_EXPORTFS_BLOCK_OPS is not set
+# CONFIG_EXT2_FS is not set
+# CONFIG_EXT2_FS_XATTR is not set
+# CONFIG_EXT3_FS is not set
+# CONFIG_EXT4_DEBUG is not set
+# CONFIG_EXT4_ENCRYPTION is not set
+# CONFIG_EXT4_FS is not set
+# CONFIG_EXT4_FS_POSIX_ACL is not set
+# CONFIG_EXT4_FS_SECURITY is not set
+CONFIG_EXT4_USE_FOR_EXT2=y
+# CONFIG_EXTCON is not set
+# CONFIG_EXTCON_ADC_JACK is not set
+# CONFIG_EXTCON_ARIZONA is not set
+# CONFIG_EXTCON_AXP288 is not set
+# CONFIG_EXTCON_GPIO is not set
+# CONFIG_EXTCON_INTEL_INT3496 is not set
+# CONFIG_EXTCON_MAX3355 is not set
+# CONFIG_EXTCON_QCOM_SPMI_MISC is not set
+# CONFIG_EXTCON_RT8973A is not set
+# CONFIG_EXTCON_SM5502 is not set
+# CONFIG_EXTCON_USB_GPIO is not set
+CONFIG_EXTRA_FIRMWARE=""
+CONFIG_EXTRA_TARGETS=""
+# CONFIG_EXYNOS_ADC is not set
+# CONFIG_EXYNOS_VIDEO is not set
+# CONFIG_EZCHIP_NPS_MANAGEMENT_ENET is not set
+# CONFIG_EZX_PCAP is not set
+# CONFIG_F2FS_FAULT_INJECTION is not set
+# CONFIG_F2FS_FS is not set
+# CONFIG_F2FS_FS_ENCRYPTION is not set
+# CONFIG_F2FS_FS_POSIX_ACL is not set
+# CONFIG_F2FS_IO_TRACE is not set
+# CONFIG_FAILOVER is not set
+# CONFIG_FAIR_GROUP_SCHED is not set
+# CONFIG_FANOTIFY is not set
+CONFIG_FAT_DEFAULT_CODEPAGE=437
+CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
+# CONFIG_FAT_DEFAULT_UTF8 is not set
+# CONFIG_FAT_FS is not set
+# CONFIG_FAULT_INJECTION is not set
+# CONFIG_FB is not set
+# CONFIG_FB_3DFX is not set
+# CONFIG_FB_ARC is not set
+# CONFIG_FB_ARK is not set
+# CONFIG_FB_ARMCLCD is not set
+# CONFIG_FB_ASILIANT is not set
+# CONFIG_FB_ATY is not set
+# CONFIG_FB_ATY128 is not set
+# CONFIG_FB_AUO_K190X is not set
+# CONFIG_FB_BACKLIGHT is not set
+# CONFIG_FB_BIG_ENDIAN is not set
+# CONFIG_FB_BOOT_VESA_SUPPORT is not set
+# CONFIG_FB_BOTH_ENDIAN is not set
+# CONFIG_FB_BROADSHEET is not set
+# CONFIG_FB_CARMINE is not set
+# CONFIG_FB_CFB_COPYAREA is not set
+# CONFIG_FB_CFB_FILLRECT is not set
+# CONFIG_FB_CFB_IMAGEBLIT is not set
+# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
+# CONFIG_FB_CIRRUS is not set
+# CONFIG_FB_CYBER2000 is not set
+# CONFIG_FB_DA8XX is not set
+# CONFIG_FB_DDC is not set
+# CONFIG_FB_FLEX is not set
+# CONFIG_FB_FOREIGN_ENDIAN is not set
+# CONFIG_FB_GEODE is not set
+# CONFIG_FB_GOLDFISH is not set
+# CONFIG_FB_HGA is not set
+# CONFIG_FB_I740 is not set
+# CONFIG_FB_IBM_GXT4500 is not set
+# CONFIG_FB_IMSTT is not set
+# CONFIG_FB_IMX is not set
+# CONFIG_FB_KYRO is not set
+# CONFIG_FB_LE80578 is not set
+# CONFIG_FB_LITTLE_ENDIAN is not set
+# CONFIG_FB_MACMODES is not set
+# CONFIG_FB_MATROX is not set
+# CONFIG_FB_MB862XX is not set
+# CONFIG_FB_METRONOME is not set
+# CONFIG_FB_MODE_HELPERS is not set
+# CONFIG_FB_MXS is not set
+# CONFIG_FB_N411 is not set
+# CONFIG_FB_NEOMAGIC is not set
+CONFIG_FB_NOTIFY=y
+# CONFIG_FB_NVIDIA is not set
+# CONFIG_FB_OF is not set
+# CONFIG_FB_OMAP2 is not set
+# CONFIG_FB_OPENCORES is not set
+# CONFIG_FB_PM2 is not set
+# CONFIG_FB_PM3 is not set
+# CONFIG_FB_PS3 is not set
+# CONFIG_FB_PXA is not set
+# CONFIG_FB_RADEON is not set
+# CONFIG_FB_RIVA is not set
+# CONFIG_FB_S1D13XXX is not set
+# CONFIG_FB_S3 is not set
+# CONFIG_FB_SAVAGE is not set
+# CONFIG_FB_SIMPLE is not set
+# CONFIG_FB_SIS is not set
+# CONFIG_FB_SM712 is not set
+# CONFIG_FB_SM750 is not set
+# CONFIG_FB_SMSCUFX is not set
+# CONFIG_FB_SSD1307 is not set
+# CONFIG_FB_SVGALIB is not set
+# CONFIG_FB_SYS_COPYAREA is not set
+# CONFIG_FB_SYS_FILLRECT is not set
+# CONFIG_FB_SYS_FOPS is not set
+# CONFIG_FB_SYS_IMAGEBLIT is not set
+# CONFIG_FB_TFT is not set
+# CONFIG_FB_TFT_AGM1264K_FL is not set
+# CONFIG_FB_TFT_BD663474 is not set
+# CONFIG_FB_TFT_FBTFT_DEVICE is not set
+# CONFIG_FB_TFT_HX8340BN is not set
+# CONFIG_FB_TFT_HX8347D is not set
+# CONFIG_FB_TFT_HX8353D is not set
+# CONFIG_FB_TFT_HX8357D is not set
+# CONFIG_FB_TFT_ILI9163 is not set
+# CONFIG_FB_TFT_ILI9320 is not set
+# CONFIG_FB_TFT_ILI9325 is not set
+# CONFIG_FB_TFT_ILI9340 is not set
+# CONFIG_FB_TFT_ILI9341 is not set
+# CONFIG_FB_TFT_ILI9481 is not set
+# CONFIG_FB_TFT_ILI9486 is not set
+# CONFIG_FB_TFT_PCD8544 is not set
+# CONFIG_FB_TFT_RA8875 is not set
+# CONFIG_FB_TFT_S6D02A1 is not set
+# CONFIG_FB_TFT_S6D1121 is not set
+# CONFIG_FB_TFT_SH1106 is not set
+# CONFIG_FB_TFT_SSD1289 is not set
+# CONFIG_FB_TFT_SSD1305 is not set
+# CONFIG_FB_TFT_SSD1306 is not set
+# CONFIG_FB_TFT_SSD1325 is not set
+# CONFIG_FB_TFT_SSD1331 is not set
+# CONFIG_FB_TFT_SSD1351 is not set
+# CONFIG_FB_TFT_ST7735R is not set
+# CONFIG_FB_TFT_ST7789V is not set
+# CONFIG_FB_TFT_TINYLCD is not set
+# CONFIG_FB_TFT_TLS8204 is not set
+# CONFIG_FB_TFT_UC1611 is not set
+# CONFIG_FB_TFT_UC1701 is not set
+# CONFIG_FB_TFT_UPD161704 is not set
+# CONFIG_FB_TFT_WATTEROTT is not set
+# CONFIG_FB_TILEBLITTING is not set
+# CONFIG_FB_TMIO is not set
+# CONFIG_FB_TRIDENT is not set
+# CONFIG_FB_UDL is not set
+# CONFIG_FB_UVESA is not set
+# CONFIG_FB_VGA16 is not set
+# CONFIG_FB_VIA is not set
+# CONFIG_FB_VIRTUAL is not set
+# CONFIG_FB_VOODOO1 is not set
+# CONFIG_FB_VT8623 is not set
+# CONFIG_FB_XGI is not set
+# CONFIG_FCOE is not set
+# CONFIG_FCOE_FNIC is not set
+# CONFIG_FDDI is not set
+# CONFIG_FEALNX is not set
+# CONFIG_FENCE_TRACE is not set
+# CONFIG_FHANDLE is not set
+CONFIG_FIB_RULES=y
+CONFIG_FILE_LOCKING=y
+# CONFIG_FIND_BIT_BENCHMARK is not set
+# CONFIG_FIREWIRE is not set
+# CONFIG_FIREWIRE_NOSY is not set
+# CONFIG_FIREWIRE_SERIAL is not set
+# CONFIG_FIRMWARE_EDID is not set
+# CONFIG_FIRMWARE_IN_KERNEL is not set
+# CONFIG_FIRMWARE_MEMMAP is not set
+# CONFIG_FIXED_PHY is not set
+CONFIG_FLATMEM=y
+CONFIG_FLATMEM_MANUAL=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+# CONFIG_FM10K is not set
+# CONFIG_FMC is not set
+# CONFIG_FORCEDETH is not set
+CONFIG_FORCE_MAX_ZONEORDER=11
+CONFIG_FORTIFY_SOURCE=y
+# CONFIG_FPGA is not set
+# CONFIG_FRAMEBUFFER_CONSOLE is not set
+# CONFIG_FRAMEBUFFER_CONSOLE_DEFERRED_TAKEOVER is not set
+# CONFIG_FRAME_POINTER is not set
+CONFIG_FRAME_WARN=1024
+# CONFIG_FREEZER is not set
+# CONFIG_FRONTSWAP is not set
+# CONFIG_FSCACHE is not set
+# CONFIG_FSI is not set
+# CONFIG_FSL_EDMA is not set
+# CONFIG_FSL_ERRATUM_A008585 is not set
+# CONFIG_FSL_MC_BUS is not set
+# CONFIG_FSL_PQ_MDIO is not set
+# CONFIG_FSL_XGMAC_MDIO is not set
+CONFIG_FSNOTIFY=y
+# CONFIG_FS_DAX is not set
+# CONFIG_FS_ENCRYPTION is not set
+# CONFIG_FS_POSIX_ACL is not set
+# CONFIG_FTGMAC100 is not set
+# CONFIG_FTL is not set
+# CONFIG_FTMAC100 is not set
+# CONFIG_FTRACE is not set
+# CONFIG_FTRACE_STARTUP_TEST is not set
+# CONFIG_FTR_FIXUP_SELFTEST is not set
+# CONFIG_FTWDT010_WATCHDOG is not set
+# CONFIG_FUJITSU_ES is not set
+# CONFIG_FUJITSU_LAPTOP is not set
+# CONFIG_FUJITSU_TABLET is not set
+# CONFIG_FUNCTION_TRACER is not set
+# CONFIG_FUSE_FS is not set
+# CONFIG_FUSION is not set
+# CONFIG_FUSION_FC is not set
+# CONFIG_FUSION_SAS is not set
+# CONFIG_FUSION_SPI is not set
+CONFIG_FUTEX=y
+CONFIG_FUTEX_PI=y
+# CONFIG_FW_CFG_SYSFS is not set
+CONFIG_FW_LOADER=y
+CONFIG_FW_LOADER_USER_HELPER=y
+CONFIG_FW_LOADER_USER_HELPER_FALLBACK=y
+CONFIG_GACT_PROB=y
+# CONFIG_GADGET_UAC1 is not set
+# CONFIG_GAMEPORT is not set
+# CONFIG_GATEWORKS_GW16083 is not set
+# CONFIG_GCC_PLUGINS is not set
+# CONFIG_GCOV is not set
+# CONFIG_GCOV_KERNEL is not set
+# CONFIG_GDB_SCRIPTS is not set
+# CONFIG_GEMINI_ETHERNET is not set
+# CONFIG_GENERIC_ADC_BATTERY is not set
+# CONFIG_GENERIC_ADC_THERMAL is not set
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+# CONFIG_GENERIC_CPU_DEVICES is not set
+CONFIG_GENERIC_HWEIGHT=y
+# CONFIG_GENERIC_IRQ_DEBUGFS is not set
+CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_GENERIC_NET_UTILS=y
+# CONFIG_GENERIC_PHY is not set
+# CONFIG_GENEVE is not set
+# CONFIG_GENWQE is not set
+# CONFIG_GFS2_FS is not set
+# CONFIG_GIGASET_CAPI is not set
+# CONFIG_GIGASET_DEBUG is not set
+# CONFIG_GIGASET_DUMMYLL is not set
+# CONFIG_GLOB_SELFTEST is not set
+# CONFIG_GNSS is not set
+# CONFIG_GOLDFISH is not set
+# CONFIG_GOOGLE_FIRMWARE is not set
+# CONFIG_GP2AP020A00F is not set
+# CONFIG_GPD_POCKET_FAN is not set
+# CONFIG_GPIOLIB is not set
+CONFIG_GPIOLIB_FASTPATH_LIMIT=512
+# CONFIG_GPIO_104_DIO_48E is not set
+# CONFIG_GPIO_104_IDIO_16 is not set
+# CONFIG_GPIO_104_IDI_48 is not set
+# CONFIG_GPIO_74X164 is not set
+# CONFIG_GPIO_74XX_MMIO is not set
+# CONFIG_GPIO_ADNP is not set
+# CONFIG_GPIO_ADP5588 is not set
+# CONFIG_GPIO_ALTERA is not set
+# CONFIG_GPIO_AMD8111 is not set
+# CONFIG_GPIO_AMDPT is not set
+# CONFIG_GPIO_BCM_KONA is not set
+# CONFIG_GPIO_BT8XX is not set
+# CONFIG_GPIO_CS5535 is not set
+# CONFIG_GPIO_DWAPB is not set
+# CONFIG_GPIO_EM is not set
+# CONFIG_GPIO_EXAR is not set
+# CONFIG_GPIO_F7188X is not set
+# CONFIG_GPIO_FTGPIO010 is not set
+# CONFIG_GPIO_GENERIC_PLATFORM is not set
+# CONFIG_GPIO_GPIO_MM is not set
+# CONFIG_GPIO_GRGPIO is not set
+# CONFIG_GPIO_HLWD is not set
+# CONFIG_GPIO_ICH is not set
+# CONFIG_GPIO_IT87 is not set
+# CONFIG_GPIO_LYNXPOINT is not set
+# CONFIG_GPIO_MAX3191X is not set
+# CONFIG_GPIO_MAX7300 is not set
+# CONFIG_GPIO_MAX7301 is not set
+# CONFIG_GPIO_MAX732X is not set
+# CONFIG_GPIO_MB86S7X is not set
+# CONFIG_GPIO_MC33880 is not set
+# CONFIG_GPIO_MCP23S08 is not set
+# CONFIG_GPIO_ML_IOH is not set
+# CONFIG_GPIO_MOCKUP is not set
+# CONFIG_GPIO_MPC8XXX is not set
+# CONFIG_GPIO_PCA953X is not set
+# CONFIG_GPIO_PCF857X is not set
+# CONFIG_GPIO_PCH is not set
+# CONFIG_GPIO_PCIE_IDIO_24 is not set
+# CONFIG_GPIO_PCI_IDIO_16 is not set
+# CONFIG_GPIO_PISOSR is not set
+# CONFIG_GPIO_PL061 is not set
+# CONFIG_GPIO_RCAR is not set
+# CONFIG_GPIO_RDC321X is not set
+# CONFIG_GPIO_SCH is not set
+# CONFIG_GPIO_SCH311X is not set
+# CONFIG_GPIO_SX150X is not set
+# CONFIG_GPIO_SYSCON is not set
+# CONFIG_GPIO_SYSFS is not set
+# CONFIG_GPIO_TPIC2810 is not set
+# CONFIG_GPIO_TS4900 is not set
+# CONFIG_GPIO_TS5500 is not set
+# CONFIG_GPIO_VX855 is not set
+# CONFIG_GPIO_WATCHDOG is not set
+# CONFIG_GPIO_WINBOND is not set
+# CONFIG_GPIO_WS16C48 is not set
+# CONFIG_GPIO_XGENE is not set
+# CONFIG_GPIO_XILINX is not set
+# CONFIG_GPIO_XRA1403 is not set
+# CONFIG_GPIO_ZEVIO is not set
+# CONFIG_GPIO_ZX is not set
+# CONFIG_GREENASIA_FF is not set
+# CONFIG_GREYBUS is not set
+# CONFIG_GS_FPGABOOT is not set
+# CONFIG_GTP is not set
+# CONFIG_GUP_BENCHMARK is not set
+# CONFIG_HAMACHI is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_HAPPYMEAL is not set
+CONFIG_HARDENED_USERCOPY=y
+# CONFIG_HARDENED_USERCOPY_FALLBACK is not set
+# CONFIG_HARDENED_USERCOPY_PAGESPAN is not set
+CONFIG_HARDEN_EL2_VECTORS=y
+# CONFIG_HARDLOCKUP_DETECTOR is not set
+# CONFIG_HAVE_AOUT is not set
+CONFIG_HAVE_ARCH_HARDENED_USERCOPY=y
+# CONFIG_HAVE_ARCH_HASH is not set
+CONFIG_HAVE_ARCH_MMAP_RND_BITS=y
+# CONFIG_HAVE_ARCH_VMAP_STACK is not set
+CONFIG_HAVE_ARCH_WITHIN_STACK_FRAMES=y
+# CONFIG_HAVE_ARM_ARCH_TIMER is not set
+CONFIG_HAVE_EXIT_THREAD=y
+CONFIG_HAVE_GCC_PLUGINS=y
+CONFIG_HAVE_HARDENED_USERCOPY_ALLOCATOR=y
+CONFIG_HAVE_KERNEL_BZIP2=y
+CONFIG_HAVE_KERNEL_CAT=y
+CONFIG_HAVE_KERNEL_GZIP=y
+CONFIG_HAVE_KERNEL_LZ4=y
+CONFIG_HAVE_KERNEL_LZMA=y
+CONFIG_HAVE_KERNEL_LZO=y
+CONFIG_HAVE_KERNEL_XZ=y
+CONFIG_HAVE_KPROBES=y
+CONFIG_HAVE_KRETPROBES=y
+CONFIG_HAVE_NMI=y
+CONFIG_HAVE_STACKPROTECTOR=y
+# CONFIG_HCALL_STATS is not set
+# CONFIG_HDC100X is not set
+# CONFIG_HDLC is not set
+# CONFIG_HDLC_CISCO is not set
+# CONFIG_HDLC_FR is not set
+# CONFIG_HDLC_PPP is not set
+# CONFIG_HDLC_RAW is not set
+# CONFIG_HDLC_RAW_ETH is not set
+# CONFIG_HDMI_LPE_AUDIO is not set
+# CONFIG_HDQ_MASTER_OMAP is not set
+# CONFIG_HEADERS_CHECK is not set
+# CONFIG_HERMES is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_HFSPLUS_FS_POSIX_ACL is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFS_FS_POSIX_ACL is not set
+# CONFIG_HI8435 is not set
+# CONFIG_HIBERNATION is not set
+# CONFIG_HID is not set
+# CONFIG_HIDRAW is not set
+# CONFIG_HID_A4TECH is not set
+# CONFIG_HID_ACCUTOUCH is not set
+# CONFIG_HID_ACRUX is not set
+# CONFIG_HID_ACRUX_FF is not set
+# CONFIG_HID_ALPS is not set
+# CONFIG_HID_APPLE is not set
+# CONFIG_HID_APPLEIR is not set
+# CONFIG_HID_ASUS is not set
+# CONFIG_HID_AUREAL is not set
+# CONFIG_HID_BATTERY_STRENGTH is not set
+# CONFIG_HID_BELKIN is not set
+# CONFIG_HID_BETOP_FF is not set
+# CONFIG_HID_BIGBEN_FF is not set
+# CONFIG_HID_CHERRY is not set
+# CONFIG_HID_CHICONY is not set
+# CONFIG_HID_CMEDIA is not set
+# CONFIG_HID_CORSAIR is not set
+# CONFIG_HID_COUGAR is not set
+# CONFIG_HID_CP2112 is not set
+# CONFIG_HID_CYPRESS is not set
+# CONFIG_HID_DRAGONRISE is not set
+# CONFIG_HID_ELAN is not set
+# CONFIG_HID_ELECOM is not set
+# CONFIG_HID_ELO is not set
+# CONFIG_HID_EMS_FF is not set
+# CONFIG_HID_EZKEY is not set
+# CONFIG_HID_GEMBIRD is not set
+# CONFIG_HID_GENERIC is not set
+# CONFIG_HID_GFRM is not set
+# CONFIG_HID_GOOGLE_HAMMER is not set
+# CONFIG_HID_GREENASIA is not set
+# CONFIG_HID_GT683R is not set
+# CONFIG_HID_GYRATION is not set
+# CONFIG_HID_HOLTEK is not set
+# CONFIG_HID_ICADE is not set
+# CONFIG_HID_ITE is not set
+# CONFIG_HID_JABRA is not set
+# CONFIG_HID_KENSINGTON is not set
+# CONFIG_HID_KEYTOUCH is not set
+# CONFIG_HID_KYE is not set
+# CONFIG_HID_LCPOWER is not set
+# CONFIG_HID_LED is not set
+# CONFIG_HID_LENOVO is not set
+# CONFIG_HID_LOGITECH is not set
+# CONFIG_HID_LOGITECH_DJ is not set
+# CONFIG_HID_LOGITECH_HIDPP is not set
+# CONFIG_HID_MAGICMOUSE is not set
+# CONFIG_HID_MAYFLASH is not set
+# CONFIG_HID_MICROSOFT is not set
+# CONFIG_HID_MONTEREY is not set
+# CONFIG_HID_MULTITOUCH is not set
+# CONFIG_HID_NTI is not set
+# CONFIG_HID_NTRIG is not set
+# CONFIG_HID_ORTEK is not set
+# CONFIG_HID_PANTHERLORD is not set
+# CONFIG_HID_PENMOUNT is not set
+# CONFIG_HID_PETALYNX is not set
+# CONFIG_HID_PICOLCD is not set
+# CONFIG_HID_PID is not set
+# CONFIG_HID_PLANTRONICS is not set
+# CONFIG_HID_PRIMAX is not set
+# CONFIG_HID_PRODIKEYS is not set
+# CONFIG_HID_REDRAGON is not set
+# CONFIG_HID_RETRODE is not set
+# CONFIG_HID_RMI is not set
+# CONFIG_HID_ROCCAT is not set
+# CONFIG_HID_SAITEK is not set
+# CONFIG_HID_SAMSUNG is not set
+# CONFIG_HID_SENSOR_HUB is not set
+# CONFIG_HID_SMARTJOYPLUS is not set
+# CONFIG_HID_SONY is not set
+# CONFIG_HID_SPEEDLINK is not set
+# CONFIG_HID_STEAM is not set
+# CONFIG_HID_STEELSERIES is not set
+# CONFIG_HID_SUNPLUS is not set
+# CONFIG_HID_THINGM is not set
+# CONFIG_HID_THRUSTMASTER is not set
+# CONFIG_HID_TIVO is not set
+# CONFIG_HID_TOPSEED is not set
+# CONFIG_HID_TWINHAN is not set
+# CONFIG_HID_UCLOGIC is not set
+# CONFIG_HID_UDRAW_PS3 is not set
+# CONFIG_HID_WACOM is not set
+# CONFIG_HID_WALTOP is not set
+# CONFIG_HID_WIIMOTE is not set
+# CONFIG_HID_XINMO is not set
+# CONFIG_HID_ZEROPLUS is not set
+# CONFIG_HID_ZYDACRON is not set
+# CONFIG_HIGHMEM is not set
+CONFIG_HIGH_RES_TIMERS=y
+# CONFIG_HINIC is not set
+# CONFIG_HIP04_ETH is not set
+# CONFIG_HIPPI is not set
+# CONFIG_HISILICON_ERRATUM_161010101 is not set
+# CONFIG_HISILICON_ERRATUM_161600802 is not set
+# CONFIG_HISI_FEMAC is not set
+# CONFIG_HIX5HD2_GMAC is not set
+# CONFIG_HMC6352 is not set
+# CONFIG_HNS is not set
+# CONFIG_HNS3 is not set
+# CONFIG_HNS_DSAF is not set
+# CONFIG_HNS_ENET is not set
+# CONFIG_HOSTAP is not set
+# CONFIG_HOSTAP_CS is not set
+# CONFIG_HOSTAP_PCI is not set
+# CONFIG_HOSTAP_PLX is not set
+# CONFIG_HOTPLUG_CPU is not set
+# CONFIG_HOTPLUG_PCI is not set
+# CONFIG_HP03 is not set
+# CONFIG_HP100 is not set
+# CONFIG_HP206C is not set
+CONFIG_HPET_MMAP_DEFAULT=y
+# CONFIG_HPFS_FS is not set
+# CONFIG_HP_ILO is not set
+# CONFIG_HP_WIRELESS is not set
+# CONFIG_HSI is not set
+# CONFIG_HSR is not set
+# CONFIG_HTC_EGPIO is not set
+# CONFIG_HTC_I2CPLD is not set
+# CONFIG_HTC_PASIC3 is not set
+# CONFIG_HTS221 is not set
+# CONFIG_HTU21 is not set
+# CONFIG_HUGETLB_PAGE is not set
+# CONFIG_HVC_DCC is not set
+# CONFIG_HVC_UDBG is not set
+# CONFIG_HWLAT_TRACER is not set
+# CONFIG_HWMON is not set
+# CONFIG_HWMON_DEBUG_CHIP is not set
+# CONFIG_HWMON_VID is not set
+# CONFIG_HWSPINLOCK is not set
+# CONFIG_HWSPINLOCK_OMAP is not set
+CONFIG_HW_PERF_EVENTS=y
+# CONFIG_HW_RANDOM is not set
+# CONFIG_HW_RANDOM_AMD is not set
+# CONFIG_HW_RANDOM_ATMEL is not set
+# CONFIG_HW_RANDOM_CAVIUM is not set
+# CONFIG_HW_RANDOM_EXYNOS is not set
+# CONFIG_HW_RANDOM_GEODE is not set
+# CONFIG_HW_RANDOM_INTEL is not set
+# CONFIG_HW_RANDOM_IPROC_RNG200 is not set
+# CONFIG_HW_RANDOM_OMAP is not set
+# CONFIG_HW_RANDOM_OMAP3_ROM is not set
+# CONFIG_HW_RANDOM_PPC4XX is not set
+# CONFIG_HW_RANDOM_TIMERIOMEM is not set
+CONFIG_HW_RANDOM_TPM=y
+# CONFIG_HW_RANDOM_VIA is not set
+# CONFIG_HW_RANDOM_VIRTIO is not set
+# CONFIG_HX711 is not set
+# CONFIG_HYPERV is not set
+# CONFIG_HYPERV_TSCPAGE is not set
+# CONFIG_HYSDN is not set
+CONFIG_HZ=100
+CONFIG_HZ_100=y
+# CONFIG_HZ_1000 is not set
+# CONFIG_HZ_1024 is not set
+# CONFIG_HZ_128 is not set
+# CONFIG_HZ_200 is not set
+# CONFIG_HZ_24 is not set
+# CONFIG_HZ_250 is not set
+# CONFIG_HZ_256 is not set
+# CONFIG_HZ_300 is not set
+# CONFIG_HZ_48 is not set
+# CONFIG_HZ_500 is not set
+# CONFIG_HZ_PERIODIC is not set
+# CONFIG_I2C is not set
+# CONFIG_I2C_ALGOBIT is not set
+# CONFIG_I2C_ALGOPCA is not set
+# CONFIG_I2C_ALGOPCF is not set
+# CONFIG_I2C_ALI1535 is not set
+# CONFIG_I2C_ALI1563 is not set
+# CONFIG_I2C_ALI15X3 is not set
+# CONFIG_I2C_AMD756 is not set
+# CONFIG_I2C_AMD8111 is not set
+# CONFIG_I2C_ARB_GPIO_CHALLENGE is not set
+# CONFIG_I2C_AU1550 is not set
+# CONFIG_I2C_BCM2835 is not set
+# CONFIG_I2C_BCM_IPROC is not set
+# CONFIG_I2C_CADENCE is not set
+# CONFIG_I2C_CBUS_GPIO is not set
+# CONFIG_I2C_CHARDEV is not set
+# CONFIG_I2C_COMPAT is not set
+# CONFIG_I2C_DEBUG_ALGO is not set
+# CONFIG_I2C_DEBUG_BUS is not set
+# CONFIG_I2C_DEBUG_CORE is not set
+# CONFIG_I2C_DEMUX_PINCTRL is not set
+# CONFIG_I2C_DESIGNWARE_PCI is not set
+# CONFIG_I2C_DESIGNWARE_PLATFORM is not set
+# CONFIG_I2C_DIOLAN_U2C is not set
+# CONFIG_I2C_EG20T is not set
+# CONFIG_I2C_ELEKTOR is not set
+# CONFIG_I2C_EMEV2 is not set
+# CONFIG_I2C_GPIO is not set
+# CONFIG_I2C_GPIO_FAULT_INJECTOR is not set
+# CONFIG_I2C_HELPER_AUTO is not set
+# CONFIG_I2C_HID is not set
+# CONFIG_I2C_I801 is not set
+# CONFIG_I2C_IBM_IIC is not set
+# CONFIG_I2C_IMG is not set
+# CONFIG_I2C_ISCH is not set
+# CONFIG_I2C_ISMT is not set
+# CONFIG_I2C_MLXCPLD is not set
+# CONFIG_I2C_MPC is not set
+# CONFIG_I2C_MUX is not set
+# CONFIG_I2C_MUX_GPIO is not set
+# CONFIG_I2C_MUX_GPMUX is not set
+# CONFIG_I2C_MUX_LTC4306 is not set
+# CONFIG_I2C_MUX_MLXCPLD is not set
+# CONFIG_I2C_MUX_PCA9541 is not set
+# CONFIG_I2C_MUX_PCA954x is not set
+# CONFIG_I2C_MUX_PINCTRL is not set
+# CONFIG_I2C_MUX_REG is not set
+# CONFIG_I2C_MV64XXX is not set
+# CONFIG_I2C_NFORCE2 is not set
+# CONFIG_I2C_NOMADIK is not set
+# CONFIG_I2C_OCORES is not set
+# CONFIG_I2C_OCTEON is not set
+# CONFIG_I2C_PARPORT is not set
+# CONFIG_I2C_PARPORT_LIGHT is not set
+# CONFIG_I2C_PCA_ISA is not set
+# CONFIG_I2C_PCA_PLATFORM is not set
+# CONFIG_I2C_PIIX4 is not set
+# CONFIG_I2C_PXA_PCI is not set
+# CONFIG_I2C_RCAR is not set
+# CONFIG_I2C_RK3X is not set
+# CONFIG_I2C_ROBOTFUZZ_OSIF is not set
+# CONFIG_I2C_S3C2410 is not set
+# CONFIG_I2C_SCMI is not set
+# CONFIG_I2C_SH_MOBILE is not set
+# CONFIG_I2C_SIMTEC is not set
+# CONFIG_I2C_SIS5595 is not set
+# CONFIG_I2C_SIS630 is not set
+# CONFIG_I2C_SIS96X is not set
+# CONFIG_I2C_SLAVE is not set
+# CONFIG_I2C_SMBUS is not set
+# CONFIG_I2C_STUB is not set
+# CONFIG_I2C_TAOS_EVM is not set
+# CONFIG_I2C_THUNDERX is not set
+# CONFIG_I2C_TINY_USB is not set
+# CONFIG_I2C_VERSATILE is not set
+# CONFIG_I2C_VIA is not set
+# CONFIG_I2C_VIAPRO is not set
+# CONFIG_I2C_XILINX is not set
+# CONFIG_I40E is not set
+# CONFIG_I40EVF is not set
+# CONFIG_I6300ESB_WDT is not set
+# CONFIG_I82092 is not set
+# CONFIG_I82365 is not set
+# CONFIG_IAQCORE is not set
+# CONFIG_IBM_ASM is not set
+# CONFIG_IBM_EMAC_DEBUG is not set
+# CONFIG_IBM_EMAC_EMAC4 is not set
+# CONFIG_IBM_EMAC_MAL_CLR_ICINTSTAT is not set
+# CONFIG_IBM_EMAC_MAL_COMMON_ERR is not set
+# CONFIG_IBM_EMAC_NO_FLOW_CTRL is not set
+# CONFIG_IBM_EMAC_RGMII is not set
+# CONFIG_IBM_EMAC_TAH is not set
+# CONFIG_IBM_EMAC_ZMII is not set
+# CONFIG_ICE is not set
+# CONFIG_ICPLUS_PHY is not set
+# CONFIG_ICS932S401 is not set
+# CONFIG_IDE is not set
+# CONFIG_IDEAPAD_LAPTOP is not set
+# CONFIG_IDE_GD is not set
+# CONFIG_IDE_PROC_FS is not set
+# CONFIG_IDE_TASK_IOCTL is not set
+# CONFIG_IDLE_PAGE_TRACKING is not set
+# CONFIG_IEEE802154 is not set
+# CONFIG_IEEE802154_ADF7242 is not set
+# CONFIG_IEEE802154_ATUSB is not set
+# CONFIG_IEEE802154_CA8210 is not set
+# CONFIG_IEEE802154_HWSIM is not set
+# CONFIG_IEEE802154_MCR20A is not set
+# CONFIG_IFB is not set
+# CONFIG_IGB is not set
+# CONFIG_IGBVF is not set
+# CONFIG_IIO is not set
+# CONFIG_IIO_BUFFER_CB is not set
+# CONFIG_IIO_BUFFER_HW_CONSUMER is not set
+# CONFIG_IIO_CONFIGFS is not set
+CONFIG_IIO_CONSUMERS_PER_TRIGGER=2
+# CONFIG_IIO_CROS_EC_ACCEL_LEGACY is not set
+# CONFIG_IIO_INTERRUPT_TRIGGER is not set
+# CONFIG_IIO_MUX is not set
+# CONFIG_IIO_PERIODIC_RTC_TRIGGER is not set
+# CONFIG_IIO_RESCALE is not set
+# CONFIG_IIO_SIMPLE_DUMMY is not set
+# CONFIG_IIO_SSP_SENSORHUB is not set
+# CONFIG_IIO_ST_ACCEL_3AXIS is not set
+# CONFIG_IIO_ST_GYRO_3AXIS is not set
+# CONFIG_IIO_ST_LSM6DSX is not set
+# CONFIG_IIO_ST_MAGN_3AXIS is not set
+# CONFIG_IIO_ST_PRESS is not set
+# CONFIG_IIO_SW_DEVICE is not set
+# CONFIG_IIO_SW_TRIGGER is not set
+# CONFIG_IIO_SYSFS_TRIGGER is not set
+# CONFIG_IKCONFIG is not set
+# CONFIG_IKCONFIG_PROC is not set
+# CONFIG_IMAGE_CMDLINE_HACK is not set
+# CONFIG_IMGPDC_WDT is not set
+# CONFIG_IMG_MDC_DMA is not set
+# CONFIG_IMX7D_ADC is not set
+# CONFIG_IMX_IPUV3_CORE is not set
+# CONFIG_IMX_THERMAL is not set
+# CONFIG_INA2XX_ADC is not set
+# CONFIG_INDIRECT_PIO is not set
+CONFIG_INET=y
+# CONFIG_INET6_AH is not set
+# CONFIG_INET6_ESP is not set
+# CONFIG_INET6_IPCOMP is not set
+# CONFIG_INET6_TUNNEL is not set
+# CONFIG_INET6_XFRM_MODE_BEET is not set
+# CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set
+# CONFIG_INET6_XFRM_MODE_TRANSPORT is not set
+# CONFIG_INET6_XFRM_MODE_TUNNEL is not set
+# CONFIG_INET6_XFRM_TUNNEL is not set
+# CONFIG_INET_AH is not set
+# CONFIG_INET_DIAG is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_LRO is not set
+# CONFIG_INET_TCP_DIAG is not set
+# CONFIG_INET_TUNNEL is not set
+# CONFIG_INET_UDP_DIAG is not set
+# CONFIG_INET_XFRM_MODE_BEET is not set
+# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
+# CONFIG_INET_XFRM_MODE_TUNNEL is not set
+# CONFIG_INET_XFRM_TUNNEL is not set
+# CONFIG_INFINIBAND is not set
+# CONFIG_INFTL is not set
+CONFIG_INIT_ENV_ARG_LIMIT=32
+# CONFIG_INLINE_READ_LOCK is not set
+# CONFIG_INLINE_READ_LOCK_BH is not set
+# CONFIG_INLINE_READ_LOCK_IRQ is not set
+# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
+# CONFIG_INLINE_READ_TRYLOCK is not set
+CONFIG_INLINE_READ_UNLOCK=y
+# CONFIG_INLINE_READ_UNLOCK_BH is not set
+CONFIG_INLINE_READ_UNLOCK_IRQ=y
+# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_SPIN_LOCK is not set
+# CONFIG_INLINE_SPIN_LOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
+# CONFIG_INLINE_SPIN_TRYLOCK is not set
+# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set
+# CONFIG_INLINE_SPIN_UNLOCK_BH is not set
+CONFIG_INLINE_SPIN_UNLOCK_IRQ=y
+# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_WRITE_LOCK is not set
+# CONFIG_INLINE_WRITE_LOCK_BH is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQ is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
+# CONFIG_INLINE_WRITE_TRYLOCK is not set
+CONFIG_INLINE_WRITE_UNLOCK=y
+# CONFIG_INLINE_WRITE_UNLOCK_BH is not set
+CONFIG_INLINE_WRITE_UNLOCK_IRQ=y
+# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
+CONFIG_INOTIFY_USER=y
+# CONFIG_INPUT is not set
+# CONFIG_INPUT_AD714X is not set
+# CONFIG_INPUT_ADXL34X is not set
+# CONFIG_INPUT_APANEL is not set
+# CONFIG_INPUT_ATI_REMOTE2 is not set
+# CONFIG_INPUT_ATLAS_BTNS is not set
+# CONFIG_INPUT_ATMEL_CAPTOUCH is not set
+# CONFIG_INPUT_AXP20X_PEK is not set
+# CONFIG_INPUT_BMA150 is not set
+# CONFIG_INPUT_CM109 is not set
+# CONFIG_INPUT_CMA3000 is not set
+# CONFIG_INPUT_DRV260X_HAPTICS is not set
+# CONFIG_INPUT_DRV2665_HAPTICS is not set
+# CONFIG_INPUT_DRV2667_HAPTICS is not set
+# CONFIG_INPUT_E3X0_BUTTON is not set
+# CONFIG_INPUT_EVBUG is not set
+# CONFIG_INPUT_EVDEV is not set
+# CONFIG_INPUT_FF_MEMLESS is not set
+# CONFIG_INPUT_GP2A is not set
+# CONFIG_INPUT_GPIO_BEEPER is not set
+# CONFIG_INPUT_GPIO_DECODER is not set
+# CONFIG_INPUT_GPIO_ROTARY_ENCODER is not set
+# CONFIG_INPUT_GPIO_TILT_POLLED is not set
+# CONFIG_INPUT_IDEAPAD_SLIDEBAR is not set
+# CONFIG_INPUT_IMS_PCU is not set
+# CONFIG_INPUT_JOYDEV is not set
+# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_KEYBOARD is not set
+# CONFIG_INPUT_KEYSPAN_REMOTE is not set
+# CONFIG_INPUT_KXTJ9 is not set
+# CONFIG_INPUT_LEDS is not set
+# CONFIG_INPUT_MATRIXKMAP is not set
+# CONFIG_INPUT_MAX8997_HAPTIC is not set
+CONFIG_INPUT_MISC=y
+# CONFIG_INPUT_MMA8450 is not set
+# CONFIG_INPUT_MOUSE is not set
+# CONFIG_INPUT_MOUSEDEV is not set
+# CONFIG_INPUT_MPU3050 is not set
+# CONFIG_INPUT_PALMAS_PWRBUTTON is not set
+# CONFIG_INPUT_PCF8574 is not set
+# CONFIG_INPUT_PCSPKR is not set
+# CONFIG_INPUT_POLLDEV is not set
+# CONFIG_INPUT_POWERMATE is not set
+# CONFIG_INPUT_PWM_BEEPER is not set
+# CONFIG_INPUT_PWM_VIBRA is not set
+# CONFIG_INPUT_REGULATOR_HAPTIC is not set
+# CONFIG_INPUT_SOC_BUTTON_ARRAY is not set
+# CONFIG_INPUT_SPARSEKMAP is not set
+# CONFIG_INPUT_TABLET is not set
+# CONFIG_INPUT_TOUCHSCREEN is not set
+# CONFIG_INPUT_TPS65218_PWRBUTTON is not set
+# CONFIG_INPUT_TWL4030_PWRBUTTON is not set
+# CONFIG_INPUT_TWL4030_VIBRA is not set
+# CONFIG_INPUT_TWL6040_VIBRA is not set
+# CONFIG_INPUT_UINPUT is not set
+# CONFIG_INPUT_WISTRON_BTNS is not set
+# CONFIG_INPUT_YEALINK is not set
+# CONFIG_INT340X_THERMAL is not set
+# CONFIG_INTEL_ATOMISP2_PM is not set
+# CONFIG_INTEL_CHT_INT33FE is not set
+# CONFIG_INTEL_HID_EVENT is not set
+# CONFIG_INTEL_IDLE is not set
+# CONFIG_INTEL_IDMA64 is not set
+# CONFIG_INTEL_IOATDMA is not set
+# CONFIG_INTEL_ISH_HID is not set
+# CONFIG_INTEL_MEI is not set
+# CONFIG_INTEL_MEI_ME is not set
+# CONFIG_INTEL_MEI_TXE is not set
+# CONFIG_INTEL_MIC_CARD is not set
+# CONFIG_INTEL_MIC_HOST is not set
+# CONFIG_INTEL_MID_PTI is not set
+# CONFIG_INTEL_OAKTRAIL is not set
+# CONFIG_INTEL_PMC_CORE is not set
+# CONFIG_INTEL_PUNIT_IPC is not set
+# CONFIG_INTEL_RST is not set
+# CONFIG_INTEL_SMARTCONNECT is not set
+# CONFIG_INTEL_SOC_PMIC is not set
+# CONFIG_INTEL_SOC_PMIC_CHTDC_TI is not set
+# CONFIG_INTEL_SOC_PMIC_CHTWC is not set
+# CONFIG_INTEL_TH is not set
+# CONFIG_INTEL_VBTN is not set
+# CONFIG_INTEL_XWAY_PHY is not set
+# CONFIG_INTERVAL_TREE_TEST is not set
+# CONFIG_INV_MPU6050_I2C is not set
+# CONFIG_INV_MPU6050_IIO is not set
+# CONFIG_INV_MPU6050_SPI is not set
+# CONFIG_IOMMU_SUPPORT is not set
+# CONFIG_IOSCHED_BFQ is not set
+# CONFIG_IOSCHED_CFQ is not set
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IO_STRICT_DEVMEM=y
+# CONFIG_IP17XX_PHY is not set
+# CONFIG_IP6_NF_FILTER is not set
+# CONFIG_IP6_NF_IPTABLES is not set
+# CONFIG_IP6_NF_MANGLE is not set
+# CONFIG_IP6_NF_MATCH_AH is not set
+# CONFIG_IP6_NF_MATCH_EUI64 is not set
+# CONFIG_IP6_NF_MATCH_FRAG is not set
+# CONFIG_IP6_NF_MATCH_HL is not set
+# CONFIG_IP6_NF_MATCH_IPV6HEADER is not set
+# CONFIG_IP6_NF_MATCH_MH is not set
+# CONFIG_IP6_NF_MATCH_OPTS is not set
+# CONFIG_IP6_NF_MATCH_RPFILTER is not set
+# CONFIG_IP6_NF_MATCH_RT is not set
+# CONFIG_IP6_NF_MATCH_SRH is not set
+# CONFIG_IP6_NF_NAT is not set
+# CONFIG_IP6_NF_RAW is not set
+# CONFIG_IP6_NF_SECURITY is not set
+# CONFIG_IP6_NF_TARGET_HL is not set
+# CONFIG_IP6_NF_TARGET_REJECT is not set
+# CONFIG_IP6_NF_TARGET_SYNPROXY is not set
+# CONFIG_IPACK_BUS is not set
+# CONFIG_IPC_NS is not set
+# CONFIG_IPMI_HANDLER is not set
+# CONFIG_IPV6 is not set
+# CONFIG_IPV6_FOU is not set
+# CONFIG_IPV6_FOU_TUNNEL is not set
+# CONFIG_IPV6_ILA is not set
+# CONFIG_IPV6_MIP6 is not set
+# CONFIG_IPV6_MROUTE is not set
+# CONFIG_IPV6_MROUTE_MULTIPLE_TABLES is not set
+# CONFIG_IPV6_MULTIPLE_TABLES is not set
+CONFIG_IPV6_NDISC_NODETYPE=y
+# CONFIG_IPV6_OPTIMISTIC_DAD is not set
+# CONFIG_IPV6_ROUTER_PREF is not set
+# CONFIG_IPV6_ROUTE_INFO is not set
+# CONFIG_IPV6_SEG6_HMAC is not set
+# CONFIG_IPV6_SEG6_LWTUNNEL is not set
+# CONFIG_IPV6_SIT is not set
+# CONFIG_IPV6_SIT_6RD is not set
+# CONFIG_IPV6_TUNNEL is not set
+# CONFIG_IPV6_VTI is not set
+# CONFIG_IPVLAN is not set
+# CONFIG_IPW2100 is not set
+# CONFIG_IPW2100_DEBUG is not set
+CONFIG_IPW2100_MONITOR=y
+# CONFIG_IPW2200 is not set
+# CONFIG_IPW2200_DEBUG is not set
+CONFIG_IPW2200_MONITOR=y
+# CONFIG_IPW2200_PROMISCUOUS is not set
+# CONFIG_IPW2200_QOS is not set
+# CONFIG_IPW2200_RADIOTAP is not set
+# CONFIG_IPWIRELESS is not set
+# CONFIG_IPX is not set
+CONFIG_IP_ADVANCED_ROUTER=y
+# CONFIG_IP_DCCP is not set
+# CONFIG_IP_FIB_TRIE_STATS is not set
+# CONFIG_IP_MROUTE is not set
+CONFIG_IP_MROUTE_MULTIPLE_TABLES=y
+CONFIG_IP_MULTICAST=y
+CONFIG_IP_MULTIPLE_TABLES=y
+# CONFIG_IP_NF_ARPFILTER is not set
+# CONFIG_IP_NF_ARPTABLES is not set
+# CONFIG_IP_NF_ARP_MANGLE is not set
+# CONFIG_IP_NF_FILTER is not set
+# CONFIG_IP_NF_IPTABLES is not set
+# CONFIG_IP_NF_MANGLE is not set
+# CONFIG_IP_NF_MATCH_AH is not set
+# CONFIG_IP_NF_MATCH_ECN is not set
+# CONFIG_IP_NF_MATCH_RPFILTER is not set
+# CONFIG_IP_NF_MATCH_TTL is not set
+# CONFIG_IP_NF_RAW is not set
+# CONFIG_IP_NF_SECURITY is not set
+# CONFIG_IP_NF_TARGET_CLUSTERIP is not set
+# CONFIG_IP_NF_TARGET_ECN is not set
+# CONFIG_IP_NF_TARGET_MASQUERADE is not set
+# CONFIG_IP_NF_TARGET_NETMAP is not set
+# CONFIG_IP_NF_TARGET_REDIRECT is not set
+# CONFIG_IP_NF_TARGET_REJECT is not set
+# CONFIG_IP_NF_TARGET_SYNPROXY is not set
+# CONFIG_IP_NF_TARGET_TTL is not set
+# CONFIG_IP_PIMSM_V1 is not set
+# CONFIG_IP_PIMSM_V2 is not set
+# CONFIG_IP_PNP is not set
+CONFIG_IP_ROUTE_MULTIPATH=y
+CONFIG_IP_ROUTE_VERBOSE=y
+# CONFIG_IP_SCTP is not set
+# CONFIG_IP_SET is not set
+# CONFIG_IP_SET_HASH_IPMAC is not set
+# CONFIG_IP_VS is not set
+# CONFIG_IP_VS_MH is not set
+CONFIG_IP_VS_MH_TAB_INDEX=10
+# CONFIG_IRDA is not set
+# CONFIG_IRQSOFF_TRACER is not set
+# CONFIG_IRQ_ALL_CPUS is not set
+# CONFIG_IRQ_DOMAIN_DEBUG is not set
+# CONFIG_IRQ_POLL is not set
+# CONFIG_IRQ_TIME_ACCOUNTING is not set
+# CONFIG_IR_GPIO_CIR is not set
+# CONFIG_IR_HIX5HD2 is not set
+# CONFIG_IR_IGORPLUGUSB is not set
+# CONFIG_IR_IGUANA is not set
+# CONFIG_IR_IMG is not set
+# CONFIG_IR_IMON is not set
+# CONFIG_IR_JVC_DECODER is not set
+# CONFIG_IR_LIRC_CODEC is not set
+# CONFIG_IR_MCEUSB is not set
+# CONFIG_IR_NEC_DECODER is not set
+# CONFIG_IR_RC5_DECODER is not set
+# CONFIG_IR_RC6_DECODER is not set
+# CONFIG_IR_REDRAT3 is not set
+# CONFIG_IR_SONY_DECODER is not set
+# CONFIG_IR_STREAMZAP is not set
+# CONFIG_IR_TTUSBIR is not set
+# CONFIG_ISA_BUS is not set
+# CONFIG_ISA_BUS_API is not set
+# CONFIG_ISCSI_BOOT_SYSFS is not set
+# CONFIG_ISCSI_TCP is not set
+CONFIG_ISDN=y
+# CONFIG_ISDN_AUDIO is not set
+# CONFIG_ISDN_CAPI is not set
+# CONFIG_ISDN_CAPI_CAPIDRV is not set
+# CONFIG_ISDN_DIVERSION is not set
+# CONFIG_ISDN_DRV_ACT2000 is not set
+# CONFIG_ISDN_DRV_GIGASET is not set
+# CONFIG_ISDN_DRV_HISAX is not set
+# CONFIG_ISDN_DRV_ICN is not set
+# CONFIG_ISDN_DRV_LOOP is not set
+# CONFIG_ISDN_DRV_PCBIT is not set
+# CONFIG_ISDN_DRV_SC is not set
+# CONFIG_ISDN_I4L is not set
+# CONFIG_ISL29003 is not set
+# CONFIG_ISL29020 is not set
+# CONFIG_ISL29125 is not set
+# CONFIG_ISL29501 is not set
+# CONFIG_ISO9660_FS is not set
+# CONFIG_ISS4xx is not set
+# CONFIG_ITG3200 is not set
+# CONFIG_IWL3945 is not set
+# CONFIG_IWLWIFI is not set
+# CONFIG_IXGB is not set
+# CONFIG_IXGBE is not set
+# CONFIG_IXGBEVF is not set
+# CONFIG_JAILHOUSE_GUEST is not set
+# CONFIG_JBD2_DEBUG is not set
+# CONFIG_JFFS2_CMODE_FAVOURLZO is not set
+# CONFIG_JFFS2_CMODE_NONE is not set
+CONFIG_JFFS2_CMODE_PRIORITY=y
+# CONFIG_JFFS2_CMODE_SIZE is not set
+CONFIG_JFFS2_COMPRESSION_OPTIONS=y
+CONFIG_JFFS2_FS=y
+CONFIG_JFFS2_FS_DEBUG=0
+# CONFIG_JFFS2_FS_POSIX_ACL is not set
+# CONFIG_JFFS2_FS_SECURITY is not set
+# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
+CONFIG_JFFS2_FS_WRITEBUFFER=y
+CONFIG_JFFS2_FS_XATTR=y
+CONFIG_JFFS2_LZMA=y
+# CONFIG_JFFS2_LZO is not set
+CONFIG_JFFS2_RTIME=y
+# CONFIG_JFFS2_RUBIN is not set
+CONFIG_JFFS2_SUMMARY=y
+# CONFIG_JFFS2_ZLIB is not set
+# CONFIG_JFS_DEBUG is not set
+# CONFIG_JFS_FS is not set
+# CONFIG_JFS_POSIX_ACL is not set
+# CONFIG_JFS_SECURITY is not set
+# CONFIG_JFS_STATISTICS is not set
+# CONFIG_JME is not set
+CONFIG_JOLIET=y
+# CONFIG_JSA1212 is not set
+# CONFIG_JUMP_LABEL is not set
+# CONFIG_KALLSYMS is not set
+# CONFIG_KALLSYMS_ABSOLUTE_PERCPU is not set
+# CONFIG_KALLSYMS_ALL is not set
+CONFIG_KALLSYMS_BASE_RELATIVE=y
+# CONFIG_KALLSYMS_UNCOMPRESSED is not set
+# CONFIG_KARMA_PARTITION is not set
+# CONFIG_KASAN is not set
+# CONFIG_KCOV is not set
+# CONFIG_KERNEL_BZIP2 is not set
+# CONFIG_KERNEL_CAT is not set
+# CONFIG_KERNEL_GZIP is not set
+# CONFIG_KERNEL_LZ4 is not set
+# CONFIG_KERNEL_LZMA is not set
+# CONFIG_KERNEL_LZO is not set
+CONFIG_KERNEL_MODE_NEON=y
+CONFIG_KERNEL_XZ=y
+CONFIG_KERNFS=y
+# CONFIG_KEXEC is not set
+# CONFIG_KEXEC_FILE is not set
+# CONFIG_KEYBOARD_ADC is not set
+# CONFIG_KEYBOARD_ADP5588 is not set
+# CONFIG_KEYBOARD_ADP5589 is not set
+# CONFIG_KEYBOARD_ATKBD is not set
+# CONFIG_KEYBOARD_BCM is not set
+# CONFIG_KEYBOARD_CAP11XX is not set
+# CONFIG_KEYBOARD_DLINK_DIR685 is not set
+# CONFIG_KEYBOARD_GPIO is not set
+# CONFIG_KEYBOARD_GPIO_POLLED is not set
+# CONFIG_KEYBOARD_LKKBD is not set
+# CONFIG_KEYBOARD_LM8323 is not set
+# CONFIG_KEYBOARD_LM8333 is not set
+# CONFIG_KEYBOARD_MATRIX is not set
+# CONFIG_KEYBOARD_MAX7359 is not set
+# CONFIG_KEYBOARD_MCS is not set
+# CONFIG_KEYBOARD_MPR121 is not set
+# CONFIG_KEYBOARD_NEWTON is not set
+# CONFIG_KEYBOARD_OMAP4 is not set
+# CONFIG_KEYBOARD_OPENCORES is not set
+# CONFIG_KEYBOARD_PXA27x is not set
+# CONFIG_KEYBOARD_QT1070 is not set
+# CONFIG_KEYBOARD_QT2160 is not set
+# CONFIG_KEYBOARD_SAMSUNG is not set
+# CONFIG_KEYBOARD_SH_KEYSC is not set
+# CONFIG_KEYBOARD_SNVS_PWRKEY is not set
+# CONFIG_KEYBOARD_STMPE is not set
+# CONFIG_KEYBOARD_STOWAWAY is not set
+# CONFIG_KEYBOARD_SUNKBD is not set
+# CONFIG_KEYBOARD_TCA6416 is not set
+# CONFIG_KEYBOARD_TCA8418 is not set
+# CONFIG_KEYBOARD_TEGRA is not set
+# CONFIG_KEYBOARD_TM2_TOUCHKEY is not set
+# CONFIG_KEYBOARD_TWL4030 is not set
+# CONFIG_KEYBOARD_XTKBD is not set
+# CONFIG_KEYS is not set
+# CONFIG_KEY_DH_OPERATIONS is not set
+# CONFIG_KGDB is not set
+# CONFIG_KMEMCHECK is not set
+# CONFIG_KMX61 is not set
+# CONFIG_KPROBES is not set
+# CONFIG_KPROBES_SANITY_TEST is not set
+# CONFIG_KS7010 is not set
+# CONFIG_KS8842 is not set
+# CONFIG_KS8851 is not set
+# CONFIG_KS8851_MLL is not set
+# CONFIG_KSM is not set
+# CONFIG_KSZ884X_PCI is not set
+CONFIG_KUSER_HELPERS=y
+# CONFIG_KVM_AMD is not set
+# CONFIG_KVM_GUEST is not set
+# CONFIG_KVM_INTEL is not set
+# CONFIG_KXCJK1013 is not set
+# CONFIG_KXSD9 is not set
+# CONFIG_L2TP is not set
+# CONFIG_L2TP_ETH is not set
+# CONFIG_L2TP_IP is not set
+# CONFIG_L2TP_V3 is not set
+# CONFIG_LAN743X is not set
+# CONFIG_LANMEDIA is not set
+# CONFIG_LANTIQ is not set
+# CONFIG_LAPB is not set
+# CONFIG_LASAT is not set
+# CONFIG_LATENCYTOP is not set
+# CONFIG_LATTICE_ECP3_CONFIG is not set
+CONFIG_LBDAF=y
+# CONFIG_LCD_AMS369FG06 is not set
+# CONFIG_LCD_HX8357 is not set
+# CONFIG_LCD_ILI922X is not set
+# CONFIG_LCD_ILI9320 is not set
+# CONFIG_LCD_L4F00242T03 is not set
+# CONFIG_LCD_LD9040 is not set
+# CONFIG_LCD_LMS283GF05 is not set
+# CONFIG_LCD_LMS501KF03 is not set
+# CONFIG_LCD_LTV350QV is not set
+# CONFIG_LCD_OTM3225A is not set
+# CONFIG_LCD_S6E63M0 is not set
+# CONFIG_LCD_TDO24M is not set
+# CONFIG_LCD_VGG2432A4 is not set
+CONFIG_LDISC_AUTOLOAD=y
+# CONFIG_LDM_PARTITION is not set
+CONFIG_LD_DEAD_CODE_DATA_ELIMINATION=y
+# CONFIG_LEDS_APU is not set
+# CONFIG_LEDS_BCM6328 is not set
+# CONFIG_LEDS_BCM6358 is not set
+# CONFIG_LEDS_BD2802 is not set
+# CONFIG_LEDS_BLINKM is not set
+CONFIG_LEDS_BRIGHTNESS_HW_CHANGED=y
+CONFIG_LEDS_CLASS=y
+# CONFIG_LEDS_CLASS_FLASH is not set
+# CONFIG_LEDS_CR0014114 is not set
+# CONFIG_LEDS_DAC124S085 is not set
+# CONFIG_LEDS_GPIO is not set
+# CONFIG_LEDS_INTEL_SS4200 is not set
+# CONFIG_LEDS_IS31FL319X is not set
+# CONFIG_LEDS_IS31FL32XX is not set
+# CONFIG_LEDS_LM3530 is not set
+# CONFIG_LEDS_LM355x is not set
+# CONFIG_LEDS_LM3642 is not set
+# CONFIG_LEDS_LM3692X is not set
+# CONFIG_LEDS_LP3944 is not set
+# CONFIG_LEDS_LP3952 is not set
+# CONFIG_LEDS_LP5521 is not set
+# CONFIG_LEDS_LP5523 is not set
+# CONFIG_LEDS_LP5562 is not set
+# CONFIG_LEDS_LP8501 is not set
+# CONFIG_LEDS_LP8860 is not set
+# CONFIG_LEDS_LT3593 is not set
+# CONFIG_LEDS_MLXCPLD is not set
+# CONFIG_LEDS_MLXREG is not set
+# CONFIG_LEDS_NIC78BX is not set
+# CONFIG_LEDS_NS2 is not set
+# CONFIG_LEDS_OT200 is not set
+# CONFIG_LEDS_PCA9532 is not set
+# CONFIG_LEDS_PCA955X is not set
+# CONFIG_LEDS_PCA963X is not set
+# CONFIG_LEDS_PWM is not set
+# CONFIG_LEDS_REGULATOR is not set
+# CONFIG_LEDS_SYSCON is not set
+# CONFIG_LEDS_TCA6507 is not set
+# CONFIG_LEDS_TLC591XX is not set
+CONFIG_LEDS_TRIGGERS=y
+# CONFIG_LEDS_TRIGGER_ACTIVITY is not set
+# CONFIG_LEDS_TRIGGER_BACKLIGHT is not set
+# CONFIG_LEDS_TRIGGER_CAMERA is not set
+# CONFIG_LEDS_TRIGGER_CPU is not set
+CONFIG_LEDS_TRIGGER_DEFAULT_ON=y
+# CONFIG_LEDS_TRIGGER_DISK is not set
+# CONFIG_LEDS_TRIGGER_GPIO is not set
+# CONFIG_LEDS_TRIGGER_HEARTBEAT is not set
+# CONFIG_LEDS_TRIGGER_IDE_DISK is not set
+# CONFIG_LEDS_TRIGGER_MTD is not set
+CONFIG_LEDS_TRIGGER_NETDEV=y
+# CONFIG_LEDS_TRIGGER_ONESHOT is not set
+# CONFIG_LEDS_TRIGGER_PANIC is not set
+CONFIG_LEDS_TRIGGER_TIMER=y
+# CONFIG_LEDS_TRIGGER_TRANSIENT is not set
+# CONFIG_LEDS_USER is not set
+# CONFIG_LED_TRIGGER_PHY is not set
+# CONFIG_LEGACY_PTYS is not set
+# CONFIG_LGUEST is not set
+# CONFIG_LIB80211 is not set
+# CONFIG_LIB80211_CRYPT_CCMP is not set
+# CONFIG_LIB80211_CRYPT_TKIP is not set
+# CONFIG_LIB80211_CRYPT_WEP is not set
+# CONFIG_LIB80211_DEBUG is not set
+# CONFIG_LIBCRC32C is not set
+# CONFIG_LIBERTAS is not set
+# CONFIG_LIBERTAS_THINFIRM is not set
+# CONFIG_LIBERTAS_USB is not set
+# CONFIG_LIBFC is not set
+# CONFIG_LIBFCOE is not set
+# CONFIG_LIBIPW_DEBUG is not set
+# CONFIG_LIBNVDIMM is not set
+# CONFIG_LIDAR_LITE_V2 is not set
+# CONFIG_LIQUIDIO is not set
+# CONFIG_LIQUIDIO_VF is not set
+# CONFIG_LIS3L02DQ is not set
+# CONFIG_LKDTM is not set
+CONFIG_LLC=y
+# CONFIG_LLC2 is not set
+# CONFIG_LMP91000 is not set
+# CONFIG_LNET is not set
+CONFIG_LOCALVERSION=""
+# CONFIG_LOCALVERSION_AUTO is not set
+# CONFIG_LOCKD is not set
+CONFIG_LOCKDEP_SUPPORT=y
+CONFIG_LOCKD_V4=y
+# CONFIG_LOCKUP_DETECTOR is not set
+# CONFIG_LOCK_STAT is not set
+# CONFIG_LOCK_TORTURE_TEST is not set
+# CONFIG_LOGFS is not set
+# CONFIG_LOGIG940_FF is not set
+# CONFIG_LOGIRUMBLEPAD2_FF is not set
+# CONFIG_LOGITECH_FF is not set
+# CONFIG_LOGIWHEELS_FF is not set
+# CONFIG_LOGO is not set
+CONFIG_LOG_BUF_SHIFT=17
+CONFIG_LOG_CPU_MAX_BUF_SHIFT=12
+# CONFIG_LOONGSON_MC146818 is not set
+# CONFIG_LPC_ICH is not set
+# CONFIG_LPC_SCH is not set
+# CONFIG_LP_CONSOLE is not set
+# CONFIG_LSI_ET1011C_PHY is not set
+# CONFIG_LTC2471 is not set
+# CONFIG_LTC2485 is not set
+# CONFIG_LTC2497 is not set
+# CONFIG_LTC2632 is not set
+# CONFIG_LTE_GDM724X is not set
+# CONFIG_LTPC is not set
+# CONFIG_LTR501 is not set
+# CONFIG_LUSTRE_FS is not set
+# CONFIG_LV0104CS is not set
+# CONFIG_LWTUNNEL is not set
+# CONFIG_LXT_PHY is not set
+# CONFIG_LZ4HC_COMPRESS is not set
+# CONFIG_LZ4_COMPRESS is not set
+# CONFIG_LZ4_DECOMPRESS is not set
+CONFIG_LZMA_COMPRESS=y
+CONFIG_LZMA_DECOMPRESS=y
+# CONFIG_LZO_COMPRESS is not set
+# CONFIG_LZO_DECOMPRESS is not set
+# CONFIG_M62332 is not set
+# CONFIG_MAC80211 is not set
+# CONFIG_MAC80211_MESSAGE_TRACING is not set
+CONFIG_MAC80211_STA_HASH_MAX_SIZE=0
+# CONFIG_MACB is not set
+# CONFIG_MACH_ASM9260 is not set
+# CONFIG_MACH_DECSTATION is not set
+# CONFIG_MACH_INGENIC is not set
+# CONFIG_MACH_JAZZ is not set
+# CONFIG_MACH_JZ4740 is not set
+# CONFIG_MACH_LOONGSON32 is not set
+# CONFIG_MACH_LOONGSON64 is not set
+# CONFIG_MACH_PIC32 is not set
+# CONFIG_MACH_PISTACHIO is not set
+# CONFIG_MACH_TX39XX is not set
+# CONFIG_MACH_TX49XX is not set
+# CONFIG_MACH_VR41XX is not set
+# CONFIG_MACH_XILFPGA is not set
+# CONFIG_MACINTOSH_DRIVERS is not set
+# CONFIG_MACSEC is not set
+# CONFIG_MACVLAN is not set
+# CONFIG_MACVTAP is not set
+# CONFIG_MAC_EMUMOUSEBTN is not set
+# CONFIG_MAC_PARTITION is not set
+# CONFIG_MAG3110 is not set
+# CONFIG_MAGIC_SYSRQ is not set
+CONFIG_MAGIC_SYSRQ_DEFAULT_ENABLE=0x1
+# CONFIG_MAGIC_SYSRQ_SERIAL is not set
+# CONFIG_MAILBOX is not set
+# CONFIG_MANAGER_SBS is not set
+# CONFIG_MANDATORY_FILE_LOCKING is not set
+# CONFIG_MANGLE_BOOTARGS is not set
+# CONFIG_MARVELL_10G_PHY is not set
+# CONFIG_MARVELL_PHY is not set
+# CONFIG_MAX1027 is not set
+# CONFIG_MAX11100 is not set
+# CONFIG_MAX1118 is not set
+# CONFIG_MAX1363 is not set
+# CONFIG_MAX30100 is not set
+# CONFIG_MAX30102 is not set
+# CONFIG_MAX44000 is not set
+# CONFIG_MAX517 is not set
+# CONFIG_MAX5481 is not set
+# CONFIG_MAX5487 is not set
+# CONFIG_MAX5821 is not set
+# CONFIG_MAX63XX_WATCHDOG is not set
+# CONFIG_MAX9611 is not set
+# CONFIG_MAXIM_THERMOCOUPLE is not set
+CONFIG_MAY_USE_DEVLINK=y
+# CONFIG_MC3230 is not set
+# CONFIG_MCB is not set
+# CONFIG_MCP320X is not set
+# CONFIG_MCP3422 is not set
+# CONFIG_MCP4018 is not set
+# CONFIG_MCP4131 is not set
+# CONFIG_MCP4531 is not set
+# CONFIG_MCP4725 is not set
+# CONFIG_MCP4922 is not set
+# CONFIG_MCPM is not set
+# CONFIG_MD is not set
+# CONFIG_MDIO_BCM_UNIMAC is not set
+# CONFIG_MDIO_BITBANG is not set
+# CONFIG_MDIO_BUS_MUX_GPIO is not set
+# CONFIG_MDIO_BUS_MUX_MMIOREG is not set
+# CONFIG_MDIO_DEVICE is not set
+# CONFIG_MDIO_HISI_FEMAC is not set
+# CONFIG_MDIO_MSCC_MIIM is not set
+# CONFIG_MDIO_OCTEON is not set
+# CONFIG_MDIO_THUNDER is not set
+# CONFIG_MD_FAULTY is not set
+# CONFIG_MEDIA_ANALOG_TV_SUPPORT is not set
+# CONFIG_MEDIA_ATTACH is not set
+# CONFIG_MEDIA_CAMERA_SUPPORT is not set
+# CONFIG_MEDIA_CEC_SUPPORT is not set
+# CONFIG_MEDIA_CONTROLLER is not set
+# CONFIG_MEDIA_DIGITAL_TV_SUPPORT is not set
+# CONFIG_MEDIA_PCI_SUPPORT is not set
+# CONFIG_MEDIA_RADIO_SUPPORT is not set
+# CONFIG_MEDIA_RC_SUPPORT is not set
+# CONFIG_MEDIA_SDR_SUPPORT is not set
+# CONFIG_MEDIA_SUBDRV_AUTOSELECT is not set
+# CONFIG_MEDIA_SUPPORT is not set
+# CONFIG_MEDIA_USB_SUPPORT is not set
+# CONFIG_MEGARAID_LEGACY is not set
+# CONFIG_MEGARAID_NEWGEN is not set
+# CONFIG_MEGARAID_SAS is not set
+# CONFIG_MELLANOX_PLATFORM is not set
+CONFIG_MEMBARRIER=y
+# CONFIG_MEMORY is not set
+# CONFIG_MEMORY_FAILURE is not set
+# CONFIG_MEMSTICK is not set
+# CONFIG_MEMTEST is not set
+# CONFIG_MEN_A21_WDT is not set
+# CONFIG_MESON_SM is not set
+CONFIG_MESSAGE_LOGLEVEL_DEFAULT=4
+# CONFIG_MFD_88PM800 is not set
+# CONFIG_MFD_88PM805 is not set
+# CONFIG_MFD_88PM860X is not set
+# CONFIG_MFD_AAT2870_CORE is not set
+# CONFIG_MFD_ACT8945A is not set
+# CONFIG_MFD_ARIZONA_I2C is not set
+# CONFIG_MFD_ARIZONA_SPI is not set
+# CONFIG_MFD_AS3711 is not set
+# CONFIG_MFD_AS3722 is not set
+# CONFIG_MFD_ASIC3 is not set
+# CONFIG_MFD_ATMEL_FLEXCOM is not set
+# CONFIG_MFD_ATMEL_HLCDC is not set
+# CONFIG_MFD_AXP20X is not set
+# CONFIG_MFD_AXP20X_I2C is not set
+# CONFIG_MFD_BCM590XX is not set
+# CONFIG_MFD_BD9571MWV is not set
+# CONFIG_MFD_CORE is not set
+# CONFIG_MFD_CPCAP is not set
+# CONFIG_MFD_CROS_EC is not set
+# CONFIG_MFD_CS5535 is not set
+# CONFIG_MFD_DA9052_I2C is not set
+# CONFIG_MFD_DA9052_SPI is not set
+# CONFIG_MFD_DA9055 is not set
+# CONFIG_MFD_DA9062 is not set
+# CONFIG_MFD_DA9063 is not set
+# CONFIG_MFD_DA9150 is not set
+# CONFIG_MFD_DLN2 is not set
+# CONFIG_MFD_EXYNOS_LPASS is not set
+# CONFIG_MFD_HI6421_PMIC is not set
+# CONFIG_MFD_INTEL_QUARK_I2C_GPIO is not set
+# CONFIG_MFD_JANZ_CMODIO is not set
+# CONFIG_MFD_KEMPLD is not set
+# CONFIG_MFD_LM3533 is not set
+# CONFIG_MFD_LP3943 is not set
+# CONFIG_MFD_LP8788 is not set
+# CONFIG_MFD_MADERA is not set
+# CONFIG_MFD_MAX14577 is not set
+# CONFIG_MFD_MAX77620 is not set
+# CONFIG_MFD_MAX77686 is not set
+# CONFIG_MFD_MAX77693 is not set
+# CONFIG_MFD_MAX77843 is not set
+# CONFIG_MFD_MAX8907 is not set
+# CONFIG_MFD_MAX8925 is not set
+# CONFIG_MFD_MAX8997 is not set
+# CONFIG_MFD_MAX8998 is not set
+# CONFIG_MFD_MC13XXX is not set
+# CONFIG_MFD_MC13XXX_I2C is not set
+# CONFIG_MFD_MC13XXX_SPI is not set
+# CONFIG_MFD_MENF21BMC is not set
+# CONFIG_MFD_MT6397 is not set
+# CONFIG_MFD_OMAP_USB_HOST is not set
+# CONFIG_MFD_PALMAS is not set
+# CONFIG_MFD_PCF50633 is not set
+# CONFIG_MFD_PM8921_CORE is not set
+# CONFIG_MFD_PM8XXX is not set
+# CONFIG_MFD_RC5T583 is not set
+# CONFIG_MFD_RDC321X is not set
+# CONFIG_MFD_RETU is not set
+# CONFIG_MFD_RK808 is not set
+# CONFIG_MFD_RN5T618 is not set
+# CONFIG_MFD_ROHM_BD718XX is not set
+# CONFIG_MFD_RT5033 is not set
+# CONFIG_MFD_RTSX_PCI is not set
+# CONFIG_MFD_RTSX_USB is not set
+# CONFIG_MFD_SEC_CORE is not set
+# CONFIG_MFD_SI476X_CORE is not set
+# CONFIG_MFD_SKY81452 is not set
+# CONFIG_MFD_SM501 is not set
+# CONFIG_MFD_SMSC is not set
+# CONFIG_MFD_STMPE is not set
+# CONFIG_MFD_SYSCON is not set
+# CONFIG_MFD_T7L66XB is not set
+# CONFIG_MFD_TC3589X is not set
+# CONFIG_MFD_TC6387XB is not set
+# CONFIG_MFD_TC6393XB is not set
+# CONFIG_MFD_TIMBERDALE is not set
+# CONFIG_MFD_TI_AM335X_TSCADC is not set
+# CONFIG_MFD_TI_LMU is not set
+# CONFIG_MFD_TI_LP873X is not set
+# CONFIG_MFD_TI_LP87565 is not set
+# CONFIG_MFD_TMIO is not set
+# CONFIG_MFD_TPS65086 is not set
+# CONFIG_MFD_TPS65090 is not set
+# CONFIG_MFD_TPS65217 is not set
+# CONFIG_MFD_TPS65218 is not set
+# CONFIG_MFD_TPS6586X is not set
+# CONFIG_MFD_TPS65910 is not set
+# CONFIG_MFD_TPS65912 is not set
+# CONFIG_MFD_TPS65912_I2C is not set
+# CONFIG_MFD_TPS65912_SPI is not set
+# CONFIG_MFD_TPS68470 is not set
+# CONFIG_MFD_TPS80031 is not set
+# CONFIG_MFD_VIPERBOARD is not set
+# CONFIG_MFD_VX855 is not set
+# CONFIG_MFD_WL1273_CORE is not set
+# CONFIG_MFD_WM831X is not set
+# CONFIG_MFD_WM831X_I2C is not set
+# CONFIG_MFD_WM831X_SPI is not set
+# CONFIG_MFD_WM8350_I2C is not set
+# CONFIG_MFD_WM8400 is not set
+# CONFIG_MFD_WM8994 is not set
+# CONFIG_MG_DISK is not set
+# CONFIG_MICREL_KS8995MA is not set
+# CONFIG_MICREL_PHY is not set
+# CONFIG_MICROCHIP_KSZ is not set
+# CONFIG_MICROCHIP_PHY is not set
+# CONFIG_MICROCHIP_T1_PHY is not set
+# CONFIG_MICROSEMI_PHY is not set
+# CONFIG_MIGRATION is not set
+CONFIG_MII=y
+# CONFIG_MIKROTIK_RB532 is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_MINIX_FS_NATIVE_ENDIAN is not set
+# CONFIG_MINIX_SUBPARTITION is not set
+# CONFIG_MIPS_ALCHEMY is not set
+# CONFIG_MIPS_CDMM is not set
+# CONFIG_MIPS_COBALT is not set
+# CONFIG_MIPS_FPU_EMULATOR is not set
+# CONFIG_MIPS_GENERIC is not set
+# CONFIG_MIPS_MALTA is not set
+# CONFIG_MIPS_O32_FP64_SUPPORT is not set
+# CONFIG_MIPS_PARAVIRT is not set
+# CONFIG_MIPS_PLATFORM_DEVICES is not set
+# CONFIG_MIPS_SEAD3 is not set
+CONFIG_MISC_FILESYSTEMS=y
+# CONFIG_MISC_RTSX_PCI is not set
+# CONFIG_MISC_RTSX_USB is not set
+# CONFIG_MISDN is not set
+# CONFIG_MISDN_AVMFRITZ is not set
+# CONFIG_MISDN_HFCPCI is not set
+# CONFIG_MISDN_HFCUSB is not set
+# CONFIG_MISDN_INFINEON is not set
+# CONFIG_MISDN_NETJET is not set
+# CONFIG_MISDN_SPEEDFAX is not set
+# CONFIG_MISDN_W6692 is not set
+# CONFIG_MKISS is not set
+# CONFIG_MLX4_CORE is not set
+# CONFIG_MLX4_EN is not set
+# CONFIG_MLX5_CORE is not set
+# CONFIG_MLX90614 is not set
+# CONFIG_MLX90632 is not set
+# CONFIG_MLXFW is not set
+# CONFIG_MLXSW_CORE is not set
+# CONFIG_MLX_CPLD_PLATFORM is not set
+# CONFIG_MLX_PLATFORM is not set
+# CONFIG_MMA7455_I2C is not set
+# CONFIG_MMA7455_SPI is not set
+# CONFIG_MMA7660 is not set
+# CONFIG_MMA8452 is not set
+# CONFIG_MMA9551 is not set
+# CONFIG_MMA9553 is not set
+# CONFIG_MMC is not set
+# CONFIG_MMC35240 is not set
+# CONFIG_MMC_ARMMMCI is not set
+# CONFIG_MMC_AU1X is not set
+# CONFIG_MMC_BLOCK is not set
+CONFIG_MMC_BLOCK_BOUNCE=y
+CONFIG_MMC_BLOCK_MINORS=8
+# CONFIG_MMC_CAVIUM_THUNDERX is not set
+# CONFIG_MMC_CB710 is not set
+# CONFIG_MMC_CQHCI is not set
+# CONFIG_MMC_DEBUG is not set
+# CONFIG_MMC_DW is not set
+# CONFIG_MMC_MTK is not set
+# CONFIG_MMC_MVSDIO is not set
+# CONFIG_MMC_S3C is not set
+# CONFIG_MMC_SDHCI is not set
+# CONFIG_MMC_SDHCI_ACPI is not set
+# CONFIG_MMC_SDHCI_BCM_KONA is not set
+# CONFIG_MMC_SDHCI_CADENCE is not set
+# CONFIG_MMC_SDHCI_F_SDH30 is not set
+# CONFIG_MMC_SDHCI_IPROC is not set
+# CONFIG_MMC_SDHCI_MSM is not set
+# CONFIG_MMC_SDHCI_OF_ARASAN is not set
+# CONFIG_MMC_SDHCI_OF_AT91 is not set
+# CONFIG_MMC_SDHCI_OF_DWCMSHC is not set
+# CONFIG_MMC_SDHCI_OF_ESDHC is not set
+# CONFIG_MMC_SDHCI_OF_HLWD is not set
+# CONFIG_MMC_SDHCI_OMAP is not set
+# CONFIG_MMC_SDHCI_PXAV2 is not set
+# CONFIG_MMC_SDHCI_PXAV3 is not set
+# CONFIG_MMC_SDHCI_S3C is not set
+# CONFIG_MMC_SDHCI_XENON is not set
+# CONFIG_MMC_SDRICOH_CS is not set
+# CONFIG_MMC_SPI is not set
+# CONFIG_MMC_TEST is not set
+# CONFIG_MMC_TOSHIBA_PCI is not set
+# CONFIG_MMC_USDHI6ROL0 is not set
+# CONFIG_MMC_USHC is not set
+# CONFIG_MMC_VIA_SDMMC is not set
+# CONFIG_MMC_VUB300 is not set
+# CONFIG_MMIOTRACE is not set
+CONFIG_MMU=y
+CONFIG_MODULES=y
+# CONFIG_MODULE_COMPRESS is not set
+# CONFIG_MODULE_FORCE_LOAD is not set
+# CONFIG_MODULE_FORCE_UNLOAD is not set
+# CONFIG_MODULE_SIG is not set
+# CONFIG_MODULE_SRCVERSION_ALL is not set
+CONFIG_MODULE_STRIPPED=y
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_MODVERSIONS is not set
+# CONFIG_MOST is not set
+# CONFIG_MOUSE_APPLETOUCH is not set
+# CONFIG_MOUSE_ELAN_I2C is not set
+# CONFIG_MOUSE_GPIO is not set
+# CONFIG_MOUSE_INPORT is not set
+# CONFIG_MOUSE_LOGIBM is not set
+# CONFIG_MOUSE_PC110PAD is not set
+# CONFIG_MOUSE_PS2_FOCALTECH is not set
+# CONFIG_MOUSE_PS2_SENTELIC is not set
+# CONFIG_MOUSE_SYNAPTICS_I2C is not set
+# CONFIG_MOUSE_SYNAPTICS_USB is not set
+# CONFIG_MPL115 is not set
+# CONFIG_MPL115_I2C is not set
+# CONFIG_MPL115_SPI is not set
+# CONFIG_MPL3115 is not set
+# CONFIG_MPLS is not set
+# CONFIG_MPU3050_I2C is not set
+# CONFIG_MQ_IOSCHED_DEADLINE is not set
+# CONFIG_MQ_IOSCHED_KYBER is not set
+# CONFIG_MS5611 is not set
+# CONFIG_MS5637 is not set
+# CONFIG_MSCC_OCELOT_SWITCH is not set
+# CONFIG_MSDOS_FS is not set
+CONFIG_MSDOS_PARTITION=y
+# CONFIG_MSI_BITMAP_SELFTEST is not set
+# CONFIG_MSI_LAPTOP is not set
+CONFIG_MTD=y
+# CONFIG_MTD_ABSENT is not set
+# CONFIG_MTD_AFS_PARTS is not set
+# CONFIG_MTD_AR7_PARTS is not set
+CONFIG_MTD_BLKDEVS=y
+CONFIG_MTD_BLOCK=y
+# CONFIG_MTD_BLOCK2MTD is not set
+CONFIG_MTD_CFI=y
+# CONFIG_MTD_CFI_ADV_OPTIONS is not set
+CONFIG_MTD_CFI_AMDSTD=y
+# CONFIG_MTD_CFI_BE_BYTE_SWAP is not set
+CONFIG_MTD_CFI_I1=y
+CONFIG_MTD_CFI_I2=y
+# CONFIG_MTD_CFI_I4 is not set
+# CONFIG_MTD_CFI_I8 is not set
+CONFIG_MTD_CFI_INTELEXT=y
+# CONFIG_MTD_CFI_LE_BYTE_SWAP is not set
+CONFIG_MTD_CFI_NOSWAP=y
+# CONFIG_MTD_CFI_STAA is not set
+CONFIG_MTD_CFI_UTIL=y
+# CONFIG_MTD_CMDLINE_PARTS is not set
+CONFIG_MTD_COMPLEX_MAPPINGS=y
+# CONFIG_MTD_DATAFLASH is not set
+# CONFIG_MTD_DOCG3 is not set
+CONFIG_MTD_GEN_PROBE=y
+# CONFIG_MTD_GPIO_ADDR is not set
+# CONFIG_MTD_INTEL_VR_NOR is not set
+# CONFIG_MTD_JEDECPROBE is not set
+# CONFIG_MTD_LATCH_ADDR is not set
+# CONFIG_MTD_LPDDR is not set
+# CONFIG_MTD_LPDDR2_NVM is not set
+# CONFIG_MTD_M25P80 is not set
+CONFIG_MTD_MAP_BANK_WIDTH_1=y
+# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
+CONFIG_MTD_MAP_BANK_WIDTH_2=y
+# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
+CONFIG_MTD_MAP_BANK_WIDTH_4=y
+# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
+# CONFIG_MTD_MCHP23K256 is not set
+# CONFIG_MTD_MT81xx_NOR is not set
+# CONFIG_MTD_MTDRAM is not set
+# CONFIG_MTD_MYLOADER_PARTS is not set
+# CONFIG_MTD_NAND is not set
+# CONFIG_MTD_NAND_AMS_DELTA is not set
+# CONFIG_MTD_NAND_AR934X is not set
+# CONFIG_MTD_NAND_AR934X_HW_ECC is not set
+# CONFIG_MTD_NAND_ATMEL is not set
+# CONFIG_MTD_NAND_AU1550 is not set
+# CONFIG_MTD_NAND_BCH is not set
+# CONFIG_MTD_NAND_BF5XX is not set
+# CONFIG_MTD_NAND_BRCMNAND is not set
+# CONFIG_MTD_NAND_CAFE is not set
+# CONFIG_MTD_NAND_CM_X270 is not set
+# CONFIG_MTD_NAND_CS553X is not set
+# CONFIG_MTD_NAND_DAVINCI is not set
+# CONFIG_MTD_NAND_DENALI is not set
+# CONFIG_MTD_NAND_DENALI_DT is not set
+# CONFIG_MTD_NAND_DENALI_PCI is not set
+CONFIG_MTD_NAND_DENALI_SCRATCH_REG_ADDR=0xff108018
+# CONFIG_MTD_NAND_DISKONCHIP is not set
+# CONFIG_MTD_NAND_DOCG4 is not set
+# CONFIG_MTD_NAND_ECC is not set
+# CONFIG_MTD_NAND_ECC_BCH is not set
+# CONFIG_MTD_NAND_ECC_SMC is not set
+# CONFIG_MTD_NAND_FSL_ELBC is not set
+# CONFIG_MTD_NAND_FSL_IFC is not set
+# CONFIG_MTD_NAND_FSL_UPM is not set
+# CONFIG_MTD_NAND_FSMC is not set
+# CONFIG_MTD_NAND_GPIO is not set
+# CONFIG_MTD_NAND_GPMI_NAND is not set
+# CONFIG_MTD_NAND_HISI504 is not set
+CONFIG_MTD_NAND_IDS=y
+# CONFIG_MTD_NAND_JZ4740 is not set
+# CONFIG_MTD_NAND_MPC5121_NFC is not set
+# CONFIG_MTD_NAND_MTK is not set
+# CONFIG_MTD_NAND_MXC is not set
+# CONFIG_MTD_NAND_NANDSIM is not set
+# CONFIG_MTD_NAND_NDFC is not set
+# CONFIG_MTD_NAND_NUC900 is not set
+# CONFIG_MTD_NAND_OMAP2 is not set
+# CONFIG_MTD_NAND_OMAP_BCH_BUILD is not set
+# CONFIG_MTD_NAND_ORION is not set
+# CONFIG_MTD_NAND_PASEMI is not set
+# CONFIG_MTD_NAND_PLATFORM is not set
+# CONFIG_MTD_NAND_PXA3xx is not set
+# CONFIG_MTD_NAND_RB4XX is not set
+# CONFIG_MTD_NAND_RB750 is not set
+# CONFIG_MTD_NAND_RICOH is not set
+# CONFIG_MTD_NAND_S3C2410 is not set
+# CONFIG_MTD_NAND_SHARPSL is not set
+# CONFIG_MTD_NAND_SH_FLCTL is not set
+# CONFIG_MTD_NAND_SOCRATES is not set
+# CONFIG_MTD_NAND_TMIO is not set
+# CONFIG_MTD_NAND_TXX9NDFMC is not set
+CONFIG_MTD_OF_PARTS=y
+# CONFIG_MTD_ONENAND is not set
+# CONFIG_MTD_OOPS is not set
+# CONFIG_MTD_OTP is not set
+# CONFIG_MTD_PARTITIONED_MASTER is not set
+# CONFIG_MTD_PCI is not set
+# CONFIG_MTD_PCMCIA is not set
+# CONFIG_MTD_PHRAM is not set
+# CONFIG_MTD_PHYSMAP is not set
+# CONFIG_MTD_PHYSMAP_COMPAT is not set
+CONFIG_MTD_PHYSMAP_OF=y
+# CONFIG_MTD_PHYSMAP_OF_GEMINI is not set
+# CONFIG_MTD_PHYSMAP_OF_VERSATILE is not set
+# CONFIG_MTD_PLATRAM is not set
+# CONFIG_MTD_PMC551 is not set
+# CONFIG_MTD_RAM is not set
+CONFIG_MTD_REDBOOT_DIRECTORY_BLOCK=-1
+# CONFIG_MTD_REDBOOT_PARTS is not set
+# CONFIG_MTD_REDBOOT_PARTS_READONLY is not set
+# CONFIG_MTD_REDBOOT_PARTS_UNALLOCATED is not set
+# CONFIG_MTD_ROM is not set
+CONFIG_MTD_ROOTFS_ROOT_DEV=y
+# CONFIG_MTD_SLRAM is not set
+# CONFIG_MTD_SM_COMMON is not set
+# CONFIG_MTD_SPINAND_MT29F is not set
+# CONFIG_MTD_SPI_NAND is not set
+# CONFIG_MTD_SPI_NOR is not set
+# CONFIG_MTD_SPI_NOR_USE_4K_SECTORS is not set
+CONFIG_MTD_SPI_NOR_USE_4K_SECTORS_LIMIT=4096
+CONFIG_MTD_SPLIT=y
+# CONFIG_MTD_SPLIT_BRNIMAGE_FW is not set
+# CONFIG_MTD_SPLIT_EVA_FW is not set
+# CONFIG_MTD_SPLIT_FIRMWARE is not set
+CONFIG_MTD_SPLIT_FIRMWARE_NAME="firmware"
+# CONFIG_MTD_SPLIT_FIT_FW is not set
+# CONFIG_MTD_SPLIT_JIMAGE_FW is not set
+# CONFIG_MTD_SPLIT_LZMA_FW is not set
+# CONFIG_MTD_SPLIT_MINOR_FW is not set
+# CONFIG_MTD_SPLIT_SEAMA_FW is not set
+CONFIG_MTD_SPLIT_SQUASHFS_ROOT=y
+CONFIG_MTD_SPLIT_SUPPORT=y
+# CONFIG_MTD_SPLIT_TPLINK_FW is not set
+# CONFIG_MTD_SPLIT_TRX_FW is not set
+# CONFIG_MTD_SPLIT_UIMAGE_FW is not set
+# CONFIG_MTD_SPLIT_WRGG_FW is not set
+# CONFIG_MTD_SST25L is not set
+# CONFIG_MTD_SWAP is not set
+# CONFIG_MTD_TESTS is not set
+# CONFIG_MTD_UBI is not set
+# CONFIG_MTD_UIMAGE_SPLIT is not set
+# CONFIG_MTD_VIRT_CONCAT is not set
+# CONFIG_MTK_MMC is not set
+CONFIG_MULTIUSER=y
+# CONFIG_MUTEX_SPIN_ON_OWNER is not set
+# CONFIG_MV643XX_ETH is not set
+# CONFIG_MVMDIO is not set
+# CONFIG_MVNETA_BM is not set
+# CONFIG_MVSW61XX_PHY is not set
+# CONFIG_MVSWITCH_PHY is not set
+# CONFIG_MV_XOR_V2 is not set
+# CONFIG_MWAVE is not set
+# CONFIG_MWL8K is not set
+# CONFIG_MXC4005 is not set
+# CONFIG_MXC6255 is not set
+# CONFIG_MYRI10GE is not set
+# CONFIG_NAMESPACES is not set
+# CONFIG_NATIONAL_PHY is not set
+# CONFIG_NATSEMI is not set
+# CONFIG_NAU7802 is not set
+# CONFIG_NBPFAXI_DMA is not set
+# CONFIG_NCP_FS is not set
+# CONFIG_NE2000 is not set
+# CONFIG_NE2K_PCI is not set
+# CONFIG_NEC_MARKEINS is not set
+CONFIG_NET=y
+# CONFIG_NETCONSOLE is not set
+CONFIG_NETDEVICES=y
+# CONFIG_NETDEVSIM is not set
+# CONFIG_NETFILTER is not set
+# CONFIG_NETFILTER_ADVANCED is not set
+# CONFIG_NETFILTER_DEBUG is not set
+# CONFIG_NETFILTER_INGRESS is not set
+# CONFIG_NETFILTER_NETLINK is not set
+# CONFIG_NETFILTER_NETLINK_ACCT is not set
+# CONFIG_NETFILTER_NETLINK_GLUE_CT is not set
+# CONFIG_NETFILTER_NETLINK_LOG is not set
+# CONFIG_NETFILTER_NETLINK_OSF is not set
+# CONFIG_NETFILTER_NETLINK_QUEUE is not set
+# CONFIG_NETFILTER_XTABLES is not set
+# CONFIG_NETFILTER_XT_CONNMARK is not set
+# CONFIG_NETFILTER_XT_MARK is not set
+# CONFIG_NETFILTER_XT_MATCH_ADDRTYPE is not set
+# CONFIG_NETFILTER_XT_MATCH_BPF is not set
+# CONFIG_NETFILTER_XT_MATCH_CGROUP is not set
+# CONFIG_NETFILTER_XT_MATCH_CLUSTER is not set
+# CONFIG_NETFILTER_XT_MATCH_COMMENT is not set
+# CONFIG_NETFILTER_XT_MATCH_CONNBYTES is not set
+# CONFIG_NETFILTER_XT_MATCH_CONNLABEL is not set
+# CONFIG_NETFILTER_XT_MATCH_CONNLIMIT is not set
+# CONFIG_NETFILTER_XT_MATCH_CONNMARK is not set
+# CONFIG_NETFILTER_XT_MATCH_CONNTRACK is not set
+# CONFIG_NETFILTER_XT_MATCH_CPU is not set
+# CONFIG_NETFILTER_XT_MATCH_DCCP is not set
+# CONFIG_NETFILTER_XT_MATCH_DEVGROUP is not set
+# CONFIG_NETFILTER_XT_MATCH_DSCP is not set
+# CONFIG_NETFILTER_XT_MATCH_ECN is not set
+# CONFIG_NETFILTER_XT_MATCH_ESP is not set
+# CONFIG_NETFILTER_XT_MATCH_HASHLIMIT is not set
+# CONFIG_NETFILTER_XT_MATCH_HELPER is not set
+# CONFIG_NETFILTER_XT_MATCH_HL is not set
+# CONFIG_NETFILTER_XT_MATCH_IPCOMP is not set
+# CONFIG_NETFILTER_XT_MATCH_IPRANGE is not set
+# CONFIG_NETFILTER_XT_MATCH_L2TP is not set
+# CONFIG_NETFILTER_XT_MATCH_LENGTH is not set
+# CONFIG_NETFILTER_XT_MATCH_LIMIT is not set
+# CONFIG_NETFILTER_XT_MATCH_MAC is not set
+# CONFIG_NETFILTER_XT_MATCH_MARK is not set
+# CONFIG_NETFILTER_XT_MATCH_MULTIPORT is not set
+# CONFIG_NETFILTER_XT_MATCH_NFACCT is not set
+# CONFIG_NETFILTER_XT_MATCH_OSF is not set
+# CONFIG_NETFILTER_XT_MATCH_OWNER is not set
+# CONFIG_NETFILTER_XT_MATCH_PHYSDEV is not set
+# CONFIG_NETFILTER_XT_MATCH_PKTTYPE is not set
+# CONFIG_NETFILTER_XT_MATCH_POLICY is not set
+# CONFIG_NETFILTER_XT_MATCH_QUOTA is not set
+# CONFIG_NETFILTER_XT_MATCH_RATEEST is not set
+# CONFIG_NETFILTER_XT_MATCH_REALM is not set
+# CONFIG_NETFILTER_XT_MATCH_RECENT is not set
+# CONFIG_NETFILTER_XT_MATCH_SCTP is not set
+# CONFIG_NETFILTER_XT_MATCH_SOCKET is not set
+# CONFIG_NETFILTER_XT_MATCH_STATE is not set
+# CONFIG_NETFILTER_XT_MATCH_STATISTIC is not set
+# CONFIG_NETFILTER_XT_MATCH_STRING is not set
+# CONFIG_NETFILTER_XT_MATCH_TCPMSS is not set
+# CONFIG_NETFILTER_XT_MATCH_TIME is not set
+# CONFIG_NETFILTER_XT_MATCH_U32 is not set
+# CONFIG_NETFILTER_XT_TARGET_AUDIT is not set
+# CONFIG_NETFILTER_XT_TARGET_CHECKSUM is not set
+# CONFIG_NETFILTER_XT_TARGET_CLASSIFY is not set
+# CONFIG_NETFILTER_XT_TARGET_CONNMARK is not set
+# CONFIG_NETFILTER_XT_TARGET_CT is not set
+# CONFIG_NETFILTER_XT_TARGET_DSCP is not set
+# CONFIG_NETFILTER_XT_TARGET_HL is not set
+# CONFIG_NETFILTER_XT_TARGET_HMARK is not set
+# CONFIG_NETFILTER_XT_TARGET_IDLETIMER is not set
+# CONFIG_NETFILTER_XT_TARGET_LED is not set
+# CONFIG_NETFILTER_XT_TARGET_LOG is not set
+# CONFIG_NETFILTER_XT_TARGET_MARK is not set
+# CONFIG_NETFILTER_XT_TARGET_NETMAP is not set
+# CONFIG_NETFILTER_XT_TARGET_NFLOG is not set
+# CONFIG_NETFILTER_XT_TARGET_NFQUEUE is not set
+# CONFIG_NETFILTER_XT_TARGET_NOTRACK is not set
+# CONFIG_NETFILTER_XT_TARGET_RATEEST is not set
+# CONFIG_NETFILTER_XT_TARGET_REDIRECT is not set
+# CONFIG_NETFILTER_XT_TARGET_TCPMSS is not set
+# CONFIG_NETFILTER_XT_TARGET_TCPOPTSTRIP is not set
+# CONFIG_NETFILTER_XT_TARGET_TEE is not set
+# CONFIG_NETFILTER_XT_TARGET_TPROXY is not set
+# CONFIG_NETFILTER_XT_TARGET_TRACE is not set
+# CONFIG_NETLINK_DIAG is not set
+# CONFIG_NETLINK_MMAP is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NETROM is not set
+CONFIG_NETWORK_FILESYSTEMS=y
+# CONFIG_NETWORK_PHY_TIMESTAMPING is not set
+# CONFIG_NETWORK_SECMARK is not set
+# CONFIG_NETXEN_NIC is not set
+# CONFIG_NET_9P is not set
+# CONFIG_NET_ACT_BPF is not set
+# CONFIG_NET_ACT_CSUM is not set
+# CONFIG_NET_ACT_GACT is not set
+# CONFIG_NET_ACT_IFE is not set
+# CONFIG_NET_ACT_IPT is not set
+# CONFIG_NET_ACT_MIRRED is not set
+# CONFIG_NET_ACT_NAT is not set
+# CONFIG_NET_ACT_PEDIT is not set
+# CONFIG_NET_ACT_POLICE is not set
+# CONFIG_NET_ACT_SAMPLE is not set
+# CONFIG_NET_ACT_SIMP is not set
+# CONFIG_NET_ACT_SKBEDIT is not set
+# CONFIG_NET_ACT_SKBMOD is not set
+# CONFIG_NET_ACT_TUNNEL_KEY is not set
+# CONFIG_NET_ACT_VLAN is not set
+CONFIG_NET_CADENCE=y
+# CONFIG_NET_CALXEDA_XGMAC is not set
+CONFIG_NET_CLS=y
+# CONFIG_NET_CLS_ACT is not set
+# CONFIG_NET_CLS_BASIC is not set
+# CONFIG_NET_CLS_BPF is not set
+# CONFIG_NET_CLS_FLOW is not set
+# CONFIG_NET_CLS_FLOWER is not set
+# CONFIG_NET_CLS_FW is not set
+CONFIG_NET_CLS_IND=y
+# CONFIG_NET_CLS_MATCHALL is not set
+# CONFIG_NET_CLS_ROUTE4 is not set
+# CONFIG_NET_CLS_RSVP is not set
+# CONFIG_NET_CLS_RSVP6 is not set
+# CONFIG_NET_CLS_TCINDEX is not set
+# CONFIG_NET_CLS_U32 is not set
+CONFIG_NET_CORE=y
+# CONFIG_NET_DEVLINK is not set
+# CONFIG_NET_DROP_MONITOR is not set
+# CONFIG_NET_DSA is not set
+# CONFIG_NET_DSA_BCM_SF2 is not set
+# CONFIG_NET_DSA_LEGACY is not set
+# CONFIG_NET_DSA_LOOP is not set
+# CONFIG_NET_DSA_MT7530 is not set
+# CONFIG_NET_DSA_MV88E6060 is not set
+# CONFIG_NET_DSA_MV88E6123_61_65 is not set
+# CONFIG_NET_DSA_MV88E6131 is not set
+# CONFIG_NET_DSA_MV88E6171 is not set
+# CONFIG_NET_DSA_MV88E6352 is not set
+# CONFIG_NET_DSA_MV88E6XXX is not set
+# CONFIG_NET_DSA_MV88E6XXX_NEED_PPU is not set
+# CONFIG_NET_DSA_QCA8K is not set
+# CONFIG_NET_DSA_REALTEK_SMI is not set
+# CONFIG_NET_DSA_SMSC_LAN9303_I2C is not set
+# CONFIG_NET_DSA_SMSC_LAN9303_MDIO is not set
+# CONFIG_NET_DSA_TAG_DSA is not set
+# CONFIG_NET_DSA_TAG_EDSA is not set
+# CONFIG_NET_DSA_VITESSE_VSC73XX is not set
+# CONFIG_NET_EMATCH is not set
+# CONFIG_NET_EMATCH_CANID is not set
+# CONFIG_NET_EMATCH_CMP is not set
+# CONFIG_NET_EMATCH_IPT is not set
+# CONFIG_NET_EMATCH_META is not set
+# CONFIG_NET_EMATCH_NBYTE is not set
+CONFIG_NET_EMATCH_STACK=32
+# CONFIG_NET_EMATCH_TEXT is not set
+# CONFIG_NET_EMATCH_U32 is not set
+# CONFIG_NET_FAILOVER is not set
+# CONFIG_NET_FC is not set
+# CONFIG_NET_FOU is not set
+# CONFIG_NET_FOU_IP_TUNNELS is not set
+# CONFIG_NET_IFE is not set
+# CONFIG_NET_IPGRE is not set
+CONFIG_NET_IPGRE_BROADCAST=y
+# CONFIG_NET_IPGRE_DEMUX is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPVTI is not set
+# CONFIG_NET_IP_TUNNEL is not set
+# CONFIG_NET_KEY is not set
+# CONFIG_NET_KEY_MIGRATE is not set
+# CONFIG_NET_L3_MASTER_DEV is not set
+# CONFIG_NET_MPLS_GSO is not set
+# CONFIG_NET_NCSI is not set
+# CONFIG_NET_NSH is not set
+# CONFIG_NET_PACKET_ENGINE is not set
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
+# CONFIG_NET_PTP_CLASSIFY is not set
+CONFIG_NET_RX_BUSY_POLL=y
+# CONFIG_NET_SB1000 is not set
+CONFIG_NET_SCHED=y
+# CONFIG_NET_SCH_ATM is not set
+# CONFIG_NET_SCH_CAKE is not set
+# CONFIG_NET_SCH_CBQ is not set
+# CONFIG_NET_SCH_CBS is not set
+# CONFIG_NET_SCH_CHOKE is not set
+# CONFIG_NET_SCH_CODEL is not set
+# CONFIG_NET_SCH_DEFAULT is not set
+# CONFIG_NET_SCH_DRR is not set
+# CONFIG_NET_SCH_DSMARK is not set
+# CONFIG_NET_SCH_ETF is not set
+CONFIG_NET_SCH_FIFO=y
+# CONFIG_NET_SCH_FQ is not set
+CONFIG_NET_SCH_FQ_CODEL=y
+# CONFIG_NET_SCH_GRED is not set
+# CONFIG_NET_SCH_HFSC is not set
+# CONFIG_NET_SCH_HHF is not set
+# CONFIG_NET_SCH_HTB is not set
+# CONFIG_NET_SCH_INGRESS is not set
+# CONFIG_NET_SCH_MQPRIO is not set
+# CONFIG_NET_SCH_MULTIQ is not set
+# CONFIG_NET_SCH_NETEM is not set
+# CONFIG_NET_SCH_PIE is not set
+# CONFIG_NET_SCH_PLUG is not set
+# CONFIG_NET_SCH_PRIO is not set
+# CONFIG_NET_SCH_QFQ is not set
+# CONFIG_NET_SCH_RED is not set
+# CONFIG_NET_SCH_SFB is not set
+# CONFIG_NET_SCH_SFQ is not set
+# CONFIG_NET_SCH_SKBPRIO is not set
+# CONFIG_NET_SCH_TBF is not set
+# CONFIG_NET_SCH_TEQL is not set
+# CONFIG_NET_SCTPPROBE is not set
+# CONFIG_NET_SWITCHDEV is not set
+# CONFIG_NET_TCPPROBE is not set
+# CONFIG_NET_TEAM is not set
+# CONFIG_NET_TULIP is not set
+# CONFIG_NET_UDP_TUNNEL is not set
+CONFIG_NET_VENDOR_3COM=y
+CONFIG_NET_VENDOR_8390=y
+CONFIG_NET_VENDOR_ADAPTEC=y
+CONFIG_NET_VENDOR_AGERE=y
+CONFIG_NET_VENDOR_ALACRITECH=y
+CONFIG_NET_VENDOR_ALTEON=y
+CONFIG_NET_VENDOR_AMAZON=y
+CONFIG_NET_VENDOR_AMD=y
+CONFIG_NET_VENDOR_AQUANTIA=y
+CONFIG_NET_VENDOR_ARC=y
+CONFIG_NET_VENDOR_ATHEROS=y
+CONFIG_NET_VENDOR_AURORA=y
+CONFIG_NET_VENDOR_BROADCOM=y
+CONFIG_NET_VENDOR_BROCADE=y
+CONFIG_NET_VENDOR_CADENCE=y
+CONFIG_NET_VENDOR_CAVIUM=y
+CONFIG_NET_VENDOR_CHELSIO=y
+CONFIG_NET_VENDOR_CIRRUS=y
+CONFIG_NET_VENDOR_CISCO=y
+CONFIG_NET_VENDOR_CORTINA=y
+CONFIG_NET_VENDOR_DEC=y
+CONFIG_NET_VENDOR_DLINK=y
+CONFIG_NET_VENDOR_EMULEX=y
+CONFIG_NET_VENDOR_EXAR=y
+CONFIG_NET_VENDOR_EZCHIP=y
+CONFIG_NET_VENDOR_FARADAY=y
+CONFIG_NET_VENDOR_FREESCALE=y
+CONFIG_NET_VENDOR_FUJITSU=y
+CONFIG_NET_VENDOR_HISILICON=y
+CONFIG_NET_VENDOR_HP=y
+CONFIG_NET_VENDOR_HUAWEI=y
+CONFIG_NET_VENDOR_I825XX=y
+CONFIG_NET_VENDOR_IBM=y
+CONFIG_NET_VENDOR_INTEL=y
+CONFIG_NET_VENDOR_MARVELL=y
+CONFIG_NET_VENDOR_MELLANOX=y
+CONFIG_NET_VENDOR_MICREL=y
+CONFIG_NET_VENDOR_MICROCHIP=y
+CONFIG_NET_VENDOR_MICROSEMI=y
+CONFIG_NET_VENDOR_MYRI=y
+CONFIG_NET_VENDOR_NATSEMI=y
+CONFIG_NET_VENDOR_NETERION=y
+CONFIG_NET_VENDOR_NETRONOME=y
+CONFIG_NET_VENDOR_NI=y
+CONFIG_NET_VENDOR_NVIDIA=y
+CONFIG_NET_VENDOR_OKI=y
+CONFIG_NET_VENDOR_PACKET_ENGINES=y
+CONFIG_NET_VENDOR_QLOGIC=y
+CONFIG_NET_VENDOR_QUALCOMM=y
+CONFIG_NET_VENDOR_RDC=y
+CONFIG_NET_VENDOR_REALTEK=y
+CONFIG_NET_VENDOR_RENESAS=y
+CONFIG_NET_VENDOR_ROCKER=y
+CONFIG_NET_VENDOR_SAMSUNG=y
+CONFIG_NET_VENDOR_SEEQ=y
+CONFIG_NET_VENDOR_SILAN=y
+CONFIG_NET_VENDOR_SIS=y
+CONFIG_NET_VENDOR_SMSC=y
+CONFIG_NET_VENDOR_SOCIONEXT=y
+CONFIG_NET_VENDOR_SOLARFLARE=y
+CONFIG_NET_VENDOR_STMICRO=y
+CONFIG_NET_VENDOR_SUN=y
+CONFIG_NET_VENDOR_SYNOPSYS=y
+CONFIG_NET_VENDOR_TEHUTI=y
+CONFIG_NET_VENDOR_TI=y
+CONFIG_NET_VENDOR_TOSHIBA=y
+CONFIG_NET_VENDOR_VIA=y
+CONFIG_NET_VENDOR_WIZNET=y
+CONFIG_NET_VENDOR_XILINX=y
+CONFIG_NET_VENDOR_XIRCOM=y
+# CONFIG_NET_VRF is not set
+# CONFIG_NET_XGENE is not set
+CONFIG_NEW_LEDS=y
+# CONFIG_NFC is not set
+# CONFIG_NFP is not set
+# CONFIG_NFSD is not set
+# CONFIG_NFSD_V2_ACL is not set
+CONFIG_NFSD_V3=y
+# CONFIG_NFSD_V3_ACL is not set
+# CONFIG_NFSD_V4 is not set
+# CONFIG_NFS_ACL_SUPPORT is not set
+CONFIG_NFS_COMMON=y
+# CONFIG_NFS_FS is not set
+# CONFIG_NFS_FSCACHE is not set
+# CONFIG_NFS_SWAP is not set
+# CONFIG_NFS_V2 is not set
+CONFIG_NFS_V3=y
+# CONFIG_NFS_V3_ACL is not set
+# CONFIG_NFS_V4 is not set
+# CONFIG_NFS_V4_1 is not set
+# CONFIG_NFTL is not set
+# CONFIG_NFT_BRIDGE_META is not set
+# CONFIG_NFT_BRIDGE_REJECT is not set
+# CONFIG_NFT_CONNLIMIT is not set
+# CONFIG_NFT_DUP_IPV4 is not set
+# CONFIG_NFT_DUP_IPV6 is not set
+# CONFIG_NFT_FIB_IPV4 is not set
+# CONFIG_NFT_FIB_IPV6 is not set
+# CONFIG_NFT_FIB_NETDEV is not set
+# CONFIG_NFT_FLOW_OFFLOAD is not set
+# CONFIG_NFT_OBJREF is not set
+# CONFIG_NFT_OSF is not set
+# CONFIG_NFT_RT is not set
+# CONFIG_NFT_SET_BITMAP is not set
+# CONFIG_NFT_SOCKET is not set
+# CONFIG_NFT_TPROXY is not set
+# CONFIG_NFT_TUNNEL is not set
+# CONFIG_NF_CONNTRACK is not set
+# CONFIG_NF_CONNTRACK_AMANDA is not set
+# CONFIG_NF_CONNTRACK_EVENTS is not set
+# CONFIG_NF_CONNTRACK_FTP is not set
+# CONFIG_NF_CONNTRACK_H323 is not set
+# CONFIG_NF_CONNTRACK_IPV4 is not set
+# CONFIG_NF_CONNTRACK_IPV6 is not set
+# CONFIG_NF_CONNTRACK_IRC is not set
+# CONFIG_NF_CONNTRACK_LABELS is not set
+# CONFIG_NF_CONNTRACK_MARK is not set
+# CONFIG_NF_CONNTRACK_NETBIOS_NS is not set
+# CONFIG_NF_CONNTRACK_PPTP is not set
+CONFIG_NF_CONNTRACK_PROCFS=y
+# CONFIG_NF_CONNTRACK_PROC_COMPAT is not set
+# CONFIG_NF_CONNTRACK_SANE is not set
+# CONFIG_NF_CONNTRACK_SIP is not set
+# CONFIG_NF_CONNTRACK_SNMP is not set
+# CONFIG_NF_CONNTRACK_TFTP is not set
+# CONFIG_NF_CONNTRACK_TIMEOUT is not set
+# CONFIG_NF_CONNTRACK_TIMESTAMP is not set
+# CONFIG_NF_CONNTRACK_ZONES is not set
+# CONFIG_NF_CT_NETLINK is not set
+# CONFIG_NF_CT_NETLINK_TIMEOUT is not set
+# CONFIG_NF_CT_PROTO_DCCP is not set
+# CONFIG_NF_CT_PROTO_GRE is not set
+# CONFIG_NF_CT_PROTO_SCTP is not set
+# CONFIG_NF_CT_PROTO_UDPLITE is not set
+# CONFIG_NF_DEFRAG_IPV4 is not set
+# CONFIG_NF_DUP_IPV4 is not set
+# CONFIG_NF_DUP_IPV6 is not set
+# CONFIG_NF_FLOW_TABLE is not set
+# CONFIG_NF_LOG_ARP is not set
+# CONFIG_NF_LOG_BRIDGE is not set
+# CONFIG_NF_LOG_IPV4 is not set
+# CONFIG_NF_LOG_NETDEV is not set
+# CONFIG_NF_NAT is not set
+# CONFIG_NF_NAT_AMANDA is not set
+# CONFIG_NF_NAT_FTP is not set
+# CONFIG_NF_NAT_H323 is not set
+# CONFIG_NF_NAT_IPV6 is not set
+# CONFIG_NF_NAT_IRC is not set
+CONFIG_NF_NAT_MASQUERADE_IPV4=y
+CONFIG_NF_NAT_MASQUERADE_IPV6=y
+# CONFIG_NF_NAT_NEEDED is not set
+# CONFIG_NF_NAT_PPTP is not set
+# CONFIG_NF_NAT_PROTO_GRE is not set
+# CONFIG_NF_NAT_SIP is not set
+# CONFIG_NF_NAT_SNMP_BASIC is not set
+# CONFIG_NF_NAT_TFTP is not set
+# CONFIG_NF_REJECT_IPV4 is not set
+# CONFIG_NF_REJECT_IPV6 is not set
+# CONFIG_NF_SOCKET_IPV4 is not set
+# CONFIG_NF_SOCKET_IPV6 is not set
+# CONFIG_NF_TABLES is not set
+CONFIG_NF_TABLES_ARP=y
+CONFIG_NF_TABLES_BRIDGE=y
+CONFIG_NF_TABLES_INET=y
+CONFIG_NF_TABLES_IPV4=y
+CONFIG_NF_TABLES_IPV6=y
+CONFIG_NF_TABLES_NETDEV=y
+# CONFIG_NF_TABLES_SET is not set
+# CONFIG_NF_TPROXY_IPV4 is not set
+# CONFIG_NF_TPROXY_IPV6 is not set
+# CONFIG_NI65 is not set
+# CONFIG_NI903X_WDT is not set
+# CONFIG_NIC7018_WDT is not set
+# CONFIG_NILFS2_FS is not set
+# CONFIG_NIU is not set
+CONFIG_NLATTR=y
+# CONFIG_NLMON is not set
+# CONFIG_NLM_XLP_BOARD is not set
+# CONFIG_NLM_XLR_BOARD is not set
+# CONFIG_NLS is not set
+# CONFIG_NLS_ASCII is not set
+# CONFIG_NLS_CODEPAGE_1250 is not set
+# CONFIG_NLS_CODEPAGE_1251 is not set
+# CONFIG_NLS_CODEPAGE_437 is not set
+# CONFIG_NLS_CODEPAGE_737 is not set
+# CONFIG_NLS_CODEPAGE_775 is not set
+# CONFIG_NLS_CODEPAGE_850 is not set
+# CONFIG_NLS_CODEPAGE_852 is not set
+# CONFIG_NLS_CODEPAGE_855 is not set
+# CONFIG_NLS_CODEPAGE_857 is not set
+# CONFIG_NLS_CODEPAGE_860 is not set
+# CONFIG_NLS_CODEPAGE_861 is not set
+# CONFIG_NLS_CODEPAGE_862 is not set
+# CONFIG_NLS_CODEPAGE_863 is not set
+# CONFIG_NLS_CODEPAGE_864 is not set
+# CONFIG_NLS_CODEPAGE_865 is not set
+# CONFIG_NLS_CODEPAGE_866 is not set
+# CONFIG_NLS_CODEPAGE_869 is not set
+# CONFIG_NLS_CODEPAGE_874 is not set
+# CONFIG_NLS_CODEPAGE_932 is not set
+# CONFIG_NLS_CODEPAGE_936 is not set
+# CONFIG_NLS_CODEPAGE_949 is not set
+# CONFIG_NLS_CODEPAGE_950 is not set
+CONFIG_NLS_DEFAULT="iso8859-1"
+# CONFIG_NLS_ISO8859_1 is not set
+# CONFIG_NLS_ISO8859_13 is not set
+# CONFIG_NLS_ISO8859_14 is not set
+# CONFIG_NLS_ISO8859_15 is not set
+# CONFIG_NLS_ISO8859_2 is not set
+# CONFIG_NLS_ISO8859_3 is not set
+# CONFIG_NLS_ISO8859_4 is not set
+# CONFIG_NLS_ISO8859_5 is not set
+# CONFIG_NLS_ISO8859_6 is not set
+# CONFIG_NLS_ISO8859_7 is not set
+# CONFIG_NLS_ISO8859_8 is not set
+# CONFIG_NLS_ISO8859_9 is not set
+# CONFIG_NLS_KOI8_R is not set
+# CONFIG_NLS_KOI8_U is not set
+# CONFIG_NLS_MAC_CELTIC is not set
+# CONFIG_NLS_MAC_CENTEURO is not set
+# CONFIG_NLS_MAC_CROATIAN is not set
+# CONFIG_NLS_MAC_CYRILLIC is not set
+# CONFIG_NLS_MAC_GAELIC is not set
+# CONFIG_NLS_MAC_GREEK is not set
+# CONFIG_NLS_MAC_ICELAND is not set
+# CONFIG_NLS_MAC_INUIT is not set
+# CONFIG_NLS_MAC_ROMAN is not set
+# CONFIG_NLS_MAC_ROMANIAN is not set
+# CONFIG_NLS_MAC_TURKISH is not set
+# CONFIG_NLS_UTF8 is not set
+CONFIG_NMI_LOG_BUF_SHIFT=13
+# CONFIG_NOP_USB_XCEIV is not set
+# CONFIG_NORTEL_HERMES is not set
+# CONFIG_NOTIFIER_ERROR_INJECTION is not set
+# CONFIG_NOUVEAU_LEGACY_CTX_SUPPORT is not set
+# CONFIG_NOZOMI is not set
+# CONFIG_NO_BOOTMEM is not set
+# CONFIG_NO_HZ is not set
+# CONFIG_NO_HZ_FULL is not set
+# CONFIG_NO_HZ_IDLE is not set
+# CONFIG_NS83820 is not set
+# CONFIG_NTB is not set
+# CONFIG_NTFS_DEBUG is not set
+# CONFIG_NTFS_FS is not set
+# CONFIG_NTFS_RW is not set
+# CONFIG_NTP_PPS is not set
+# CONFIG_NVM is not set
+# CONFIG_NVMEM is not set
+# CONFIG_NVMEM_BCM_OCOTP is not set
+# CONFIG_NVMEM_IMX_OCOTP is not set
+# CONFIG_NVME_FC is not set
+# CONFIG_NVME_TARGET is not set
+# CONFIG_NVRAM is not set
+# CONFIG_NV_TCO is not set
+# CONFIG_NXP_STB220 is not set
+# CONFIG_NXP_STB225 is not set
+# CONFIG_N_GSM is not set
+# CONFIG_OABI_COMPAT is not set
+# CONFIG_OBS600 is not set
+# CONFIG_OCFS2_FS is not set
+# CONFIG_OF_OVERLAY is not set
+# CONFIG_OF_UNITTEST is not set
+# CONFIG_OMAP2_DSS_DEBUG is not set
+# CONFIG_OMAP2_DSS_DEBUGFS is not set
+# CONFIG_OMAP2_DSS_SDI is not set
+# CONFIG_OMAP_OCP2SCP is not set
+# CONFIG_OMAP_USB2 is not set
+# CONFIG_OMFS_FS is not set
+# CONFIG_OPENVSWITCH is not set
+# CONFIG_OPROFILE is not set
+# CONFIG_OPROFILE_EVENT_MULTIPLEX is not set
+# CONFIG_OPT3001 is not set
+CONFIG_OPTIMIZE_INLINING=y
+# CONFIG_ORANGEFS_FS is not set
+# CONFIG_ORION_WATCHDOG is not set
+# CONFIG_OSF_PARTITION is not set
+CONFIG_OVERLAY_FS=y
+# CONFIG_OVERLAY_FS_INDEX is not set
+# CONFIG_OVERLAY_FS_METACOPY is not set
+CONFIG_OVERLAY_FS_REDIRECT_ALWAYS_FOLLOW=y
+# CONFIG_OVERLAY_FS_REDIRECT_DIR is not set
+CONFIG_OVERLAY_FS_XINO_AUTO=y
+# CONFIG_OWL_LOADER is not set
+# CONFIG_P54_COMMON is not set
+# CONFIG_PA12203001 is not set
+CONFIG_PACKET=y
+# CONFIG_PACKET_DIAG is not set
+# CONFIG_PAGE_EXTENSION is not set
+# CONFIG_PAGE_OWNER is not set
+# CONFIG_PAGE_POISONING is not set
+# CONFIG_PAGE_SIZE_16KB is not set
+# CONFIG_PAGE_SIZE_32KB is not set
+CONFIG_PAGE_SIZE_4KB=y
+# CONFIG_PAGE_SIZE_64KB is not set
+# CONFIG_PAGE_SIZE_8KB is not set
+# CONFIG_PALMAS_GPADC is not set
+# CONFIG_PANASONIC_LAPTOP is not set
+# CONFIG_PANEL is not set
+CONFIG_PANIC_ON_OOPS=y
+CONFIG_PANIC_ON_OOPS_VALUE=1
+CONFIG_PANIC_TIMEOUT=1
+# CONFIG_PANTHERLORD_FF is not set
+# CONFIG_PARAVIRT is not set
+# CONFIG_PARAVIRT_TIME_ACCOUNTING is not set
+# CONFIG_PARPORT is not set
+# CONFIG_PARPORT_1284 is not set
+# CONFIG_PARPORT_AX88796 is not set
+# CONFIG_PARPORT_GSC is not set
+# CONFIG_PARPORT_PC is not set
+CONFIG_PARTITION_ADVANCED=y
+# CONFIG_PATA_ALI is not set
+# CONFIG_PATA_AMD is not set
+# CONFIG_PATA_ARASAN_CF is not set
+# CONFIG_PATA_ARTOP is not set
+# CONFIG_PATA_ATIIXP is not set
+# CONFIG_PATA_ATP867X is not set
+# CONFIG_PATA_CMD640_PCI is not set
+# CONFIG_PATA_CMD64X is not set
+# CONFIG_PATA_CS5520 is not set
+# CONFIG_PATA_CS5530 is not set
+# CONFIG_PATA_CS5535 is not set
+# CONFIG_PATA_CS5536 is not set
+# CONFIG_PATA_CYPRESS is not set
+# CONFIG_PATA_EFAR is not set
+# CONFIG_PATA_HPT366 is not set
+# CONFIG_PATA_HPT37X is not set
+# CONFIG_PATA_HPT3X2N is not set
+# CONFIG_PATA_HPT3X3 is not set
+# CONFIG_PATA_IMX is not set
+# CONFIG_PATA_ISAPNP is not set
+# CONFIG_PATA_IT8213 is not set
+# CONFIG_PATA_IT821X is not set
+# CONFIG_PATA_JMICRON is not set
+# CONFIG_PATA_LEGACY is not set
+# CONFIG_PATA_MARVELL is not set
+# CONFIG_PATA_MPIIX is not set
+# CONFIG_PATA_NETCELL is not set
+# CONFIG_PATA_NINJA32 is not set
+# CONFIG_PATA_NS87410 is not set
+# CONFIG_PATA_NS87415 is not set
+# CONFIG_PATA_OCTEON_CF is not set
+# CONFIG_PATA_OF_PLATFORM is not set
+# CONFIG_PATA_OLDPIIX is not set
+# CONFIG_PATA_OPTI is not set
+# CONFIG_PATA_OPTIDMA is not set
+# CONFIG_PATA_PCMCIA is not set
+# CONFIG_PATA_PDC2027X is not set
+# CONFIG_PATA_PDC_OLD is not set
+# CONFIG_PATA_PLATFORM is not set
+# CONFIG_PATA_QDI is not set
+# CONFIG_PATA_RADISYS is not set
+# CONFIG_PATA_RDC is not set
+# CONFIG_PATA_RZ1000 is not set
+# CONFIG_PATA_SC1200 is not set
+# CONFIG_PATA_SCH is not set
+# CONFIG_PATA_SERVERWORKS is not set
+# CONFIG_PATA_SIL680 is not set
+# CONFIG_PATA_SIS is not set
+# CONFIG_PATA_TOSHIBA is not set
+# CONFIG_PATA_TRIFLEX is not set
+# CONFIG_PATA_VIA is not set
+# CONFIG_PATA_WINBOND is not set
+# CONFIG_PATA_WINBOND_VLB is not set
+# CONFIG_PC104 is not set
+# CONFIG_PC300TOO is not set
+# CONFIG_PCCARD is not set
+# CONFIG_PCH_DMA is not set
+# CONFIG_PCH_GBE is not set
+# CONFIG_PCH_PHUB is not set
+# CONFIG_PCI is not set
+# CONFIG_PCI200SYN is not set
+# CONFIG_PCIEAER_INJECT is not set
+# CONFIG_PCIEASPM is not set
+# CONFIG_PCIEPORTBUS is not set
+# CONFIG_PCIE_ALTERA is not set
+# CONFIG_PCIE_ARMADA_8K is not set
+# CONFIG_PCIE_CADENCE_HOST is not set
+# CONFIG_PCIE_DPC is not set
+# CONFIG_PCIE_DW_PLAT is not set
+# CONFIG_PCIE_DW_PLAT_HOST is not set
+# CONFIG_PCIE_ECRC is not set
+# CONFIG_PCIE_IPROC is not set
+# CONFIG_PCIE_KIRIN is not set
+# CONFIG_PCIE_PTM is not set
+# CONFIG_PCIE_XILINX is not set
+# CONFIG_PCIPCWATCHDOG is not set
+# CONFIG_PCI_ATMEL is not set
+# CONFIG_PCI_CNB20LE_QUIRK is not set
+# CONFIG_PCI_DEBUG is not set
+# CONFIG_PCI_DISABLE_COMMON_QUIRKS is not set
+# CONFIG_PCI_ENDPOINT is not set
+# CONFIG_PCI_ENDPOINT_TEST is not set
+# CONFIG_PCI_FTPCI100 is not set
+# CONFIG_PCI_HERMES is not set
+# CONFIG_PCI_HISI is not set
+# CONFIG_PCI_HOST_GENERIC is not set
+# CONFIG_PCI_HOST_THUNDER_ECAM is not set
+# CONFIG_PCI_HOST_THUNDER_PEM is not set
+# CONFIG_PCI_IOV is not set
+# CONFIG_PCI_LAYERSCAPE is not set
+# CONFIG_PCI_MSI is not set
+# CONFIG_PCI_PASID is not set
+# CONFIG_PCI_PF_STUB is not set
+# CONFIG_PCI_PRI is not set
+CONFIG_PCI_QUIRKS=y
+# CONFIG_PCI_REALLOC_ENABLE_AUTO is not set
+# CONFIG_PCI_STUB is not set
+# CONFIG_PCI_SW_SWITCHTEC is not set
+CONFIG_PCI_SYSCALL=y
+# CONFIG_PCI_V3_SEMI is not set
+# CONFIG_PCI_XGENE is not set
+# CONFIG_PCMCIA is not set
+# CONFIG_PCMCIA_3C574 is not set
+# CONFIG_PCMCIA_3C589 is not set
+# CONFIG_PCMCIA_AHA152X is not set
+# CONFIG_PCMCIA_ATMEL is not set
+# CONFIG_PCMCIA_AXNET is not set
+# CONFIG_PCMCIA_DEBUG is not set
+# CONFIG_PCMCIA_FDOMAIN is not set
+# CONFIG_PCMCIA_FMVJ18X is not set
+# CONFIG_PCMCIA_HERMES is not set
+# CONFIG_PCMCIA_LOAD_CIS is not set
+# CONFIG_PCMCIA_NINJA_SCSI is not set
+# CONFIG_PCMCIA_NMCLAN is not set
+# CONFIG_PCMCIA_PCNET is not set
+# CONFIG_PCMCIA_QLOGIC is not set
+# CONFIG_PCMCIA_RAYCS is not set
+# CONFIG_PCMCIA_SMC91C92 is not set
+# CONFIG_PCMCIA_SPECTRUM is not set
+# CONFIG_PCMCIA_SYM53C500 is not set
+# CONFIG_PCMCIA_WL3501 is not set
+# CONFIG_PCMCIA_XIRC2PS is not set
+# CONFIG_PCMCIA_XIRCOM is not set
+# CONFIG_PCNET32 is not set
+# CONFIG_PCSPKR_PLATFORM is not set
+# CONFIG_PD6729 is not set
+# CONFIG_PDA_POWER is not set
+# CONFIG_PDC_ADMA is not set
+# CONFIG_PERCPU_STATS is not set
+# CONFIG_PERCPU_TEST is not set
+# CONFIG_PERF_EVENTS is not set
+# CONFIG_PERF_EVENTS_AMD_POWER is not set
+# CONFIG_PERSISTENT_KEYRINGS is not set
+# CONFIG_PHANTOM is not set
+# CONFIG_PHONET is not set
+# CONFIG_PHYLIB is not set
+# CONFIG_PHYS_ADDR_T_64BIT is not set
+# CONFIG_PHY_CPCAP_USB is not set
+# CONFIG_PHY_EXYNOS_DP_VIDEO is not set
+# CONFIG_PHY_EXYNOS_MIPI_VIDEO is not set
+# CONFIG_PHY_MAPPHONE_MDM6600 is not set
+# CONFIG_PHY_PXA_28NM_HSIC is not set
+# CONFIG_PHY_PXA_28NM_USB2 is not set
+# CONFIG_PHY_QCOM_DWC3 is not set
+# CONFIG_PHY_QCOM_USB_HS is not set
+# CONFIG_PHY_QCOM_USB_HSIC is not set
+# CONFIG_PHY_SAMSUNG_USB2 is not set
+# CONFIG_PHY_TUSB1210 is not set
+# CONFIG_PHY_XGENE is not set
+# CONFIG_PI433 is not set
+# CONFIG_PID_IN_CONTEXTIDR is not set
+# CONFIG_PID_NS is not set
+CONFIG_PINCONF=y
+# CONFIG_PINCTRL is not set
+# CONFIG_PINCTRL_AMD is not set
+# CONFIG_PINCTRL_AXP209 is not set
+# CONFIG_PINCTRL_CEDARFORK is not set
+# CONFIG_PINCTRL_EXYNOS is not set
+# CONFIG_PINCTRL_EXYNOS5440 is not set
+# CONFIG_PINCTRL_ICELAKE is not set
+# CONFIG_PINCTRL_MCP23S08 is not set
+# CONFIG_PINCTRL_MSM8X74 is not set
+CONFIG_PINCTRL_SINGLE=y
+# CONFIG_PINCTRL_SX150X is not set
+CONFIG_PINMUX=y
+# CONFIG_PKCS7_MESSAGE_PARSER is not set
+# CONFIG_PL320_MBOX is not set
+# CONFIG_PL330_DMA is not set
+# CONFIG_PLATFORM_MHU is not set
+# CONFIG_PLAT_SPEAR is not set
+# CONFIG_PLIP is not set
+CONFIG_PLUGIN_HOSTCC=""
+# CONFIG_PLX_HERMES is not set
+# CONFIG_PM is not set
+# CONFIG_PMBUS is not set
+# CONFIG_PMC_MSP is not set
+# CONFIG_PMIC_ADP5520 is not set
+# CONFIG_PMIC_DA903X is not set
+# CONFIG_PM_AUTOSLEEP is not set
+# CONFIG_PM_DEVFREQ is not set
+# CONFIG_PM_WAKELOCKS is not set
+# CONFIG_POSIX_MQUEUE is not set
+CONFIG_POSIX_TIMERS=y
+# CONFIG_POWERCAP is not set
+# CONFIG_POWER_AVS is not set
+# CONFIG_POWER_RESET is not set
+# CONFIG_POWER_RESET_BRCMKONA is not set
+# CONFIG_POWER_RESET_BRCMSTB is not set
+# CONFIG_POWER_RESET_GPIO is not set
+# CONFIG_POWER_RESET_GPIO_RESTART is not set
+# CONFIG_POWER_RESET_LTC2952 is not set
+# CONFIG_POWER_RESET_PIIX4_POWEROFF is not set
+# CONFIG_POWER_RESET_RESTART is not set
+# CONFIG_POWER_RESET_SYSCON is not set
+# CONFIG_POWER_RESET_SYSCON_POWEROFF is not set
+# CONFIG_POWER_RESET_VERSATILE is not set
+# CONFIG_POWER_RESET_XGENE is not set
+# CONFIG_POWER_SUPPLY is not set
+# CONFIG_POWER_SUPPLY_DEBUG is not set
+# CONFIG_PPC4xx_GPIO is not set
+# CONFIG_PPC_16K_PAGES is not set
+# CONFIG_PPC_256K_PAGES is not set
+CONFIG_PPC_4K_PAGES=y
+# CONFIG_PPC_64K_PAGES is not set
+# CONFIG_PPC_DISABLE_WERROR is not set
+# CONFIG_PPC_EMULATED_STATS is not set
+# CONFIG_PPC_EPAPR_HV_BYTECHAN is not set
+# CONFIG_PPP is not set
+# CONFIG_PPPOATM is not set
+# CONFIG_PPPOE is not set
+# CONFIG_PPPOL2TP is not set
+# CONFIG_PPP_ASYNC is not set
+# CONFIG_PPP_BSDCOMP is not set
+# CONFIG_PPP_DEFLATE is not set
+CONFIG_PPP_FILTER=y
+# CONFIG_PPP_MPPE is not set
+CONFIG_PPP_MULTILINK=y
+# CONFIG_PPP_SYNC_TTY is not set
+# CONFIG_PPS is not set
+# CONFIG_PPS_CLIENT_GPIO is not set
+# CONFIG_PPS_CLIENT_KTIMER is not set
+# CONFIG_PPS_CLIENT_LDISC is not set
+# CONFIG_PPS_CLIENT_PARPORT is not set
+# CONFIG_PPS_DEBUG is not set
+# CONFIG_PPTP is not set
+# CONFIG_PREEMPT is not set
+# CONFIG_PREEMPTIRQ_DELAY_TEST is not set
+# CONFIG_PREEMPTIRQ_EVENTS is not set
+CONFIG_PREEMPT_NONE=y
+# CONFIG_PREEMPT_TRACER is not set
+# CONFIG_PREEMPT_VOLUNTARY is not set
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+CONFIG_PRINTK=y
+CONFIG_PRINTK_NMI=y
+CONFIG_PRINTK_SAFE_LOG_BUF_SHIFT=13
+# CONFIG_PRINTK_TIME is not set
+CONFIG_PRINT_STACK_DEPTH=64
+# CONFIG_PRISM2_USB is not set
+# CONFIG_PRISM54 is not set
+# CONFIG_PROC_CHILDREN is not set
+CONFIG_PROC_FS=y
+# CONFIG_PROC_KCORE is not set
+# CONFIG_PROC_PAGE_MONITOR is not set
+CONFIG_PROC_STRIPPED=y
+CONFIG_PROC_SYSCTL=y
+# CONFIG_PROC_VMCORE_DEVICE_DUMP is not set
+# CONFIG_PROFILE_ALL_BRANCHES is not set
+# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
+# CONFIG_PROFILING is not set
+# CONFIG_PROVE_LOCKING is not set
+# CONFIG_PROVE_RCU is not set
+# CONFIG_PROVE_RCU_REPEATEDLY is not set
+# CONFIG_PSAMPLE is not set
+# CONFIG_PSB6970_PHY is not set
+# CONFIG_PSTORE is not set
+# CONFIG_PTP_1588_CLOCK is not set
+# CONFIG_PTP_1588_CLOCK_IXP46X is not set
+# CONFIG_PTP_1588_CLOCK_KVM is not set
+# CONFIG_PTP_1588_CLOCK_PCH is not set
+# CONFIG_PUBLIC_KEY_ALGO_RSA is not set
+# CONFIG_PWM is not set
+# CONFIG_PWM_FSL_FTM is not set
+# CONFIG_PWM_PCA9685 is not set
+CONFIG_PWRSEQ_EMMC=y
+# CONFIG_PWRSEQ_SD8787 is not set
+CONFIG_PWRSEQ_SIMPLE=y
+# CONFIG_QCA7000 is not set
+# CONFIG_QCA7000_SPI is not set
+# CONFIG_QCA7000_UART is not set
+# CONFIG_QCOM_EMAC is not set
+# CONFIG_QCOM_FALKOR_ERRATUM_1003 is not set
+# CONFIG_QCOM_FALKOR_ERRATUM_1009 is not set
+# CONFIG_QCOM_FALKOR_ERRATUM_E1041 is not set
+# CONFIG_QCOM_HIDMA is not set
+# CONFIG_QCOM_HIDMA_MGMT is not set
+# CONFIG_QCOM_QDF2400_ERRATUM_0065 is not set
+# CONFIG_QCOM_SPMI_IADC is not set
+# CONFIG_QCOM_SPMI_TEMP_ALARM is not set
+# CONFIG_QCOM_SPMI_VADC is not set
+# CONFIG_QED is not set
+# CONFIG_QLA3XXX is not set
+# CONFIG_QLCNIC is not set
+# CONFIG_QLGE is not set
+# CONFIG_QNX4FS_FS is not set
+# CONFIG_QNX6FS_FS is not set
+# CONFIG_QORIQ_CPUFREQ is not set
+# CONFIG_QORIQ_THERMAL is not set
+# CONFIG_QSEMI_PHY is not set
+# CONFIG_QUEUED_LOCK_STAT is not set
+# CONFIG_QUOTA is not set
+# CONFIG_QUOTACTL is not set
+# CONFIG_QUOTA_DEBUG is not set
+# CONFIG_R3964 is not set
+# CONFIG_R6040 is not set
+# CONFIG_R8169 is not set
+# CONFIG_R8188EU is not set
+# CONFIG_R8712U is not set
+# CONFIG_R8723AU is not set
+# CONFIG_RADIO_ADAPTERS is not set
+# CONFIG_RADIO_AZTECH is not set
+# CONFIG_RADIO_CADET is not set
+# CONFIG_RADIO_GEMTEK is not set
+# CONFIG_RADIO_MAXIRADIO is not set
+# CONFIG_RADIO_RTRACK is not set
+# CONFIG_RADIO_RTRACK2 is not set
+# CONFIG_RADIO_SF16FMI is not set
+# CONFIG_RADIO_SF16FMR2 is not set
+# CONFIG_RADIO_TERRATEC is not set
+# CONFIG_RADIO_TRUST is not set
+# CONFIG_RADIO_TYPHOON is not set
+# CONFIG_RADIO_ZOLTRIX is not set
+# CONFIG_RAID_ATTRS is not set
+# CONFIG_RALINK is not set
+# CONFIG_RANDOM32_SELFTEST is not set
+# CONFIG_RANDOM_TRUST_CPU is not set
+# CONFIG_RAPIDIO is not set
+# CONFIG_RAS is not set
+# CONFIG_RAW_DRIVER is not set
+# CONFIG_RBTREE_TEST is not set
+CONFIG_RCU_CPU_STALL_TIMEOUT=60
+# CONFIG_RCU_EQS_DEBUG is not set
+# CONFIG_RCU_EXPEDITE_BOOT is not set
+CONFIG_RCU_EXPERT=y
+CONFIG_RCU_FANOUT=32
+CONFIG_RCU_FANOUT_LEAF=16
+# CONFIG_RCU_FAST_NO_HZ is not set
+CONFIG_RCU_KTHREAD_PRIO=0
+# CONFIG_RCU_NOCB_CPU is not set
+# CONFIG_RCU_PERF_TEST is not set
+# CONFIG_RCU_TORTURE_TEST is not set
+CONFIG_RCU_TORTURE_TEST_SLOW_INIT_DELAY=3
+# CONFIG_RCU_TRACE is not set
+# CONFIG_RC_ATI_REMOTE is not set
+# CONFIG_RC_CORE is not set
+# CONFIG_RC_DECODERS is not set
+# CONFIG_RC_LOOPBACK is not set
+# CONFIG_RC_MAP is not set
+# CONFIG_RDS is not set
+# CONFIG_RD_BZIP2 is not set
+# CONFIG_RD_GZIP is not set
+# CONFIG_RD_LZ4 is not set
+# CONFIG_RD_LZMA is not set
+# CONFIG_RD_LZO is not set
+# CONFIG_RD_XZ is not set
+# CONFIG_READABLE_ASM is not set
+# CONFIG_REALTEK_PHY is not set
+# CONFIG_REDWOOD is not set
+# CONFIG_REFCOUNT_FULL is not set
+# CONFIG_REGMAP is not set
+# CONFIG_REGMAP_I2C is not set
+# CONFIG_REGMAP_MMIO is not set
+# CONFIG_REGMAP_SPI is not set
+# CONFIG_REGULATOR is not set
+# CONFIG_REGULATOR_88PG86X is not set
+# CONFIG_REGULATOR_ACT8865 is not set
+# CONFIG_REGULATOR_AD5398 is not set
+# CONFIG_REGULATOR_ANATOP is not set
+# CONFIG_REGULATOR_DA9210 is not set
+# CONFIG_REGULATOR_DA9211 is not set
+# CONFIG_REGULATOR_DEBUG is not set
+# CONFIG_REGULATOR_FAN53555 is not set
+# CONFIG_REGULATOR_FIXED_VOLTAGE is not set
+# CONFIG_REGULATOR_GPIO is not set
+# CONFIG_REGULATOR_ISL6271A is not set
+# CONFIG_REGULATOR_ISL9305 is not set
+# CONFIG_REGULATOR_LP3971 is not set
+# CONFIG_REGULATOR_LP3972 is not set
+# CONFIG_REGULATOR_LP872X is not set
+# CONFIG_REGULATOR_LP8755 is not set
+# CONFIG_REGULATOR_LTC3589 is not set
+# CONFIG_REGULATOR_LTC3676 is not set
+# CONFIG_REGULATOR_MAX1586 is not set
+# CONFIG_REGULATOR_MAX8649 is not set
+# CONFIG_REGULATOR_MAX8660 is not set
+# CONFIG_REGULATOR_MAX8952 is not set
+# CONFIG_REGULATOR_MAX8973 is not set
+# CONFIG_REGULATOR_MT6311 is not set
+# CONFIG_REGULATOR_PFUZE100 is not set
+# CONFIG_REGULATOR_PV88060 is not set
+# CONFIG_REGULATOR_PV88080 is not set
+# CONFIG_REGULATOR_PV88090 is not set
+# CONFIG_REGULATOR_PWM is not set
+# CONFIG_REGULATOR_SY8106A is not set
+# CONFIG_REGULATOR_TI_ABB is not set
+# CONFIG_REGULATOR_TPS51632 is not set
+# CONFIG_REGULATOR_TPS62360 is not set
+# CONFIG_REGULATOR_TPS65023 is not set
+# CONFIG_REGULATOR_TPS6507X is not set
+# CONFIG_REGULATOR_TPS65132 is not set
+# CONFIG_REGULATOR_TPS6524X is not set
+# CONFIG_REGULATOR_USERSPACE_CONSUMER is not set
+# CONFIG_REGULATOR_VCTRL is not set
+# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set
+# CONFIG_REISERFS_CHECK is not set
+# CONFIG_REISERFS_FS is not set
+# CONFIG_REISERFS_FS_POSIX_ACL is not set
+# CONFIG_REISERFS_FS_SECURITY is not set
+# CONFIG_REISERFS_FS_XATTR is not set
+# CONFIG_REISERFS_PROC_INFO is not set
+# CONFIG_RELAY is not set
+# CONFIG_RELOCATABLE is not set
+# CONFIG_REMOTEPROC is not set
+# CONFIG_RENESAS_PHY is not set
+# CONFIG_RESET_ATH79 is not set
+# CONFIG_RESET_BERLIN is not set
+# CONFIG_RESET_CONTROLLER is not set
+# CONFIG_RESET_IMX7 is not set
+# CONFIG_RESET_LANTIQ is not set
+# CONFIG_RESET_LPC18XX is not set
+# CONFIG_RESET_MESON is not set
+# CONFIG_RESET_PISTACHIO is not set
+# CONFIG_RESET_SOCFPGA is not set
+# CONFIG_RESET_STM32 is not set
+# CONFIG_RESET_SUNXI is not set
+# CONFIG_RESET_TEGRA_BPMP is not set
+# CONFIG_RESET_TI_SYSCON is not set
+# CONFIG_RESET_ZYNQ is not set
+# CONFIG_RFD77402 is not set
+# CONFIG_RFD_FTL is not set
+CONFIG_RFKILL=y
+# CONFIG_RFKILL_FULL is not set
+# CONFIG_RFKILL_GPIO is not set
+# CONFIG_RFKILL_INPUT is not set
+# CONFIG_RFKILL_LEDS is not set
+# CONFIG_RFKILL_REGULATOR is not set
+# CONFIG_RING_BUFFER_BENCHMARK is not set
+# CONFIG_RING_BUFFER_STARTUP_TEST is not set
+# CONFIG_RMI4_CORE is not set
+# CONFIG_RMNET is not set
+# CONFIG_ROCKCHIP_PHY is not set
+# CONFIG_ROCKER is not set
+# CONFIG_ROMFS_FS is not set
+# CONFIG_ROSE is not set
+# CONFIG_RPCSEC_GSS_KRB5 is not set
+# CONFIG_RPMSG_QCOM_GLINK_RPM is not set
+# CONFIG_RPMSG_VIRTIO is not set
+# CONFIG_RPR0521 is not set
+# CONFIG_RSEQ is not set
+# CONFIG_RT2X00 is not set
+# CONFIG_RTC_CLASS is not set
+# CONFIG_RTC_DEBUG is not set
+# CONFIG_RTC_DRV_ABB5ZES3 is not set
+# CONFIG_RTC_DRV_ABX80X is not set
+# CONFIG_RTC_DRV_ARMADA38X is not set
+# CONFIG_RTC_DRV_AU1XXX is not set
+# CONFIG_RTC_DRV_BQ32K is not set
+# CONFIG_RTC_DRV_BQ4802 is not set
+CONFIG_RTC_DRV_CMOS=y
+# CONFIG_RTC_DRV_DS1286 is not set
+# CONFIG_RTC_DRV_DS1302 is not set
+# CONFIG_RTC_DRV_DS1305 is not set
+# CONFIG_RTC_DRV_DS1307 is not set
+# CONFIG_RTC_DRV_DS1307_CENTURY is not set
+# CONFIG_RTC_DRV_DS1307_HWMON is not set
+# CONFIG_RTC_DRV_DS1343 is not set
+# CONFIG_RTC_DRV_DS1347 is not set
+# CONFIG_RTC_DRV_DS1374 is not set
+# CONFIG_RTC_DRV_DS1390 is not set
+# CONFIG_RTC_DRV_DS1511 is not set
+# CONFIG_RTC_DRV_DS1553 is not set
+# CONFIG_RTC_DRV_DS1672 is not set
+# CONFIG_RTC_DRV_DS1685_FAMILY is not set
+# CONFIG_RTC_DRV_DS1742 is not set
+# CONFIG_RTC_DRV_DS2404 is not set
+# CONFIG_RTC_DRV_DS3232 is not set
+# CONFIG_RTC_DRV_DS3234 is not set
+# CONFIG_RTC_DRV_EM3027 is not set
+# CONFIG_RTC_DRV_EP93XX is not set
+# CONFIG_RTC_DRV_FM3130 is not set
+# CONFIG_RTC_DRV_FTRTC010 is not set
+# CONFIG_RTC_DRV_GENERIC is not set
+# CONFIG_RTC_DRV_HID_SENSOR_TIME is not set
+# CONFIG_RTC_DRV_HYM8563 is not set
+# CONFIG_RTC_DRV_ISL12022 is not set
+# CONFIG_RTC_DRV_ISL12026 is not set
+# CONFIG_RTC_DRV_ISL12057 is not set
+# CONFIG_RTC_DRV_ISL1208 is not set
+# CONFIG_RTC_DRV_M41T80 is not set
+# CONFIG_RTC_DRV_M41T93 is not set
+# CONFIG_RTC_DRV_M41T94 is not set
+# CONFIG_RTC_DRV_M48T35 is not set
+# CONFIG_RTC_DRV_M48T59 is not set
+# CONFIG_RTC_DRV_M48T86 is not set
+# CONFIG_RTC_DRV_MAX6900 is not set
+# CONFIG_RTC_DRV_MAX6902 is not set
+# CONFIG_RTC_DRV_MAX6916 is not set
+# CONFIG_RTC_DRV_MCP795 is not set
+# CONFIG_RTC_DRV_MOXART is not set
+# CONFIG_RTC_DRV_MPC5121 is not set
+# CONFIG_RTC_DRV_MSM6242 is not set
+# CONFIG_RTC_DRV_OMAP is not set
+# CONFIG_RTC_DRV_PCF2123 is not set
+# CONFIG_RTC_DRV_PCF2127 is not set
+# CONFIG_RTC_DRV_PCF85063 is not set
+# CONFIG_RTC_DRV_PCF8523 is not set
+# CONFIG_RTC_DRV_PCF85363 is not set
+# CONFIG_RTC_DRV_PCF8563 is not set
+# CONFIG_RTC_DRV_PCF8583 is not set
+# CONFIG_RTC_DRV_PL030 is not set
+# CONFIG_RTC_DRV_PL031 is not set
+# CONFIG_RTC_DRV_PS3 is not set
+# CONFIG_RTC_DRV_PT7C4338 is not set
+# CONFIG_RTC_DRV_R7301 is not set
+# CONFIG_RTC_DRV_R9701 is not set
+# CONFIG_RTC_DRV_RP5C01 is not set
+# CONFIG_RTC_DRV_RS5C348 is not set
+# CONFIG_RTC_DRV_RS5C372 is not set
+# CONFIG_RTC_DRV_RTC7301 is not set
+# CONFIG_RTC_DRV_RV3029C2 is not set
+# CONFIG_RTC_DRV_RV8803 is not set
+# CONFIG_RTC_DRV_RX4581 is not set
+# CONFIG_RTC_DRV_RX6110 is not set
+# CONFIG_RTC_DRV_RX8010 is not set
+# CONFIG_RTC_DRV_RX8025 is not set
+# CONFIG_RTC_DRV_RX8581 is not set
+# CONFIG_RTC_DRV_S35390A is not set
+# CONFIG_RTC_DRV_SNVS is not set
+# CONFIG_RTC_DRV_STK17TA8 is not set
+# CONFIG_RTC_DRV_SUN6I is not set
+# CONFIG_RTC_DRV_TEST is not set
+# CONFIG_RTC_DRV_V3020 is not set
+# CONFIG_RTC_DRV_X1205 is not set
+# CONFIG_RTC_DRV_XGENE is not set
+# CONFIG_RTC_DRV_ZYNQMP is not set
+CONFIG_RTC_HCTOSYS=y
+CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
+CONFIG_RTC_INTF_DEV=y
+# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
+CONFIG_RTC_INTF_PROC=y
+CONFIG_RTC_INTF_SYSFS=y
+CONFIG_RTC_LIB=y
+# CONFIG_RTC_NVMEM is not set
+CONFIG_RTC_SYSTOHC=y
+CONFIG_RTC_SYSTOHC_DEVICE="rtc0"
+# CONFIG_RTL8180 is not set
+# CONFIG_RTL8187 is not set
+# CONFIG_RTL8192E is not set
+# CONFIG_RTL8192U is not set
+# CONFIG_RTL8306_PHY is not set
+# CONFIG_RTL8366RB_PHY is not set
+# CONFIG_RTL8366S_PHY is not set
+# CONFIG_RTL8366_SMI is not set
+# CONFIG_RTL8366_SMI_DEBUG_FS is not set
+# CONFIG_RTL8367B_PHY is not set
+# CONFIG_RTL8367_PHY is not set
+# CONFIG_RTLLIB is not set
+# CONFIG_RTL_CARDS is not set
+# CONFIG_RTS5208 is not set
+CONFIG_RT_MUTEXES=y
+# CONFIG_RUNTIME_DEBUG is not set
+CONFIG_RUNTIME_TESTING_MENU=y
+CONFIG_RWSEM_GENERIC_SPINLOCK=y
+CONFIG_RXKAD=y
+# CONFIG_S2IO is not set
+# CONFIG_SAMPLES is not set
+# CONFIG_SAMSUNG_LAPTOP is not set
+# CONFIG_SATA_ACARD_AHCI is not set
+# CONFIG_SATA_AHCI is not set
+# CONFIG_SATA_AHCI_PLATFORM is not set
+# CONFIG_SATA_DWC is not set
+# CONFIG_SATA_FSL is not set
+# CONFIG_SATA_HIGHBANK is not set
+# CONFIG_SATA_INIC162X is not set
+CONFIG_SATA_MOBILE_LPM_POLICY=0
+# CONFIG_SATA_MV is not set
+# CONFIG_SATA_NV is not set
+# CONFIG_SATA_PMP is not set
+# CONFIG_SATA_PROMISE is not set
+# CONFIG_SATA_QSTOR is not set
+# CONFIG_SATA_RCAR is not set
+# CONFIG_SATA_SIL is not set
+# CONFIG_SATA_SIL24 is not set
+# CONFIG_SATA_SIS is not set
+# CONFIG_SATA_SVW is not set
+# CONFIG_SATA_SX4 is not set
+# CONFIG_SATA_ULI is not set
+# CONFIG_SATA_VIA is not set
+# CONFIG_SATA_VITESSE is not set
+# CONFIG_SBC_FITPC2_WATCHDOG is not set
+CONFIG_SBITMAP=y
+# CONFIG_SC92031 is not set
+# CONFIG_SCA3000 is not set
+# CONFIG_SCACHE_DEBUGFS is not set
+# CONFIG_SCC is not set
+# CONFIG_SCHEDSTATS is not set
+# CONFIG_SCHED_AUTOGROUP is not set
+# CONFIG_SCHED_DEBUG is not set
+CONFIG_SCHED_HRTICK=y
+# CONFIG_SCHED_MC is not set
+CONFIG_SCHED_OMIT_FRAME_POINTER=y
+# CONFIG_SCHED_SMT is not set
+# CONFIG_SCHED_STACK_END_CHECK is not set
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_SCR24X is not set
+# CONFIG_SCSI is not set
+# CONFIG_SCSI_3W_9XXX is not set
+# CONFIG_SCSI_3W_SAS is not set
+# CONFIG_SCSI_7000FASST is not set
+# CONFIG_SCSI_AACRAID is not set
+# CONFIG_SCSI_ACARD is not set
+# CONFIG_SCSI_ADVANSYS is not set
+# CONFIG_SCSI_AHA152X is not set
+# CONFIG_SCSI_AHA1542 is not set
+# CONFIG_SCSI_AIC79XX is not set
+# CONFIG_SCSI_AIC7XXX is not set
+# CONFIG_SCSI_AIC94XX is not set
+# CONFIG_SCSI_AM53C974 is not set
+# CONFIG_SCSI_ARCMSR is not set
+# CONFIG_SCSI_BFA_FC is not set
+# CONFIG_SCSI_BNX2X_FCOE is not set
+# CONFIG_SCSI_BNX2_ISCSI is not set
+# CONFIG_SCSI_BUSLOGIC is not set
+# CONFIG_SCSI_CHELSIO_FCOE is not set
+# CONFIG_SCSI_CONSTANTS is not set
+# CONFIG_SCSI_CXGB3_ISCSI is not set
+# CONFIG_SCSI_CXGB4_ISCSI is not set
+# CONFIG_SCSI_DC395x is not set
+# CONFIG_SCSI_DEBUG is not set
+# CONFIG_SCSI_DH is not set
+CONFIG_SCSI_DMA=y
+# CONFIG_SCSI_DMX3191D is not set
+# CONFIG_SCSI_DPT_I2O is not set
+# CONFIG_SCSI_DTC3280 is not set
+# CONFIG_SCSI_EATA is not set
+# CONFIG_SCSI_ESAS2R is not set
+# CONFIG_SCSI_FC_ATTRS is not set
+# CONFIG_SCSI_FUTURE_DOMAIN is not set
+# CONFIG_SCSI_GDTH is not set
+# CONFIG_SCSI_GENERIC_NCR5380 is not set
+# CONFIG_SCSI_GENERIC_NCR5380_MMIO is not set
+# CONFIG_SCSI_HISI_SAS is not set
+# CONFIG_SCSI_HPSA is not set
+# CONFIG_SCSI_HPTIOP is not set
+# CONFIG_SCSI_IN2000 is not set
+# CONFIG_SCSI_INIA100 is not set
+# CONFIG_SCSI_INITIO is not set
+# CONFIG_SCSI_IPR is not set
+# CONFIG_SCSI_IPS is not set
+# CONFIG_SCSI_ISCI is not set
+# CONFIG_SCSI_ISCSI_ATTRS is not set
+# CONFIG_SCSI_LOGGING is not set
+CONFIG_SCSI_LOWLEVEL=y
+# CONFIG_SCSI_LOWLEVEL_PCMCIA is not set
+# CONFIG_SCSI_LPFC is not set
+CONFIG_SCSI_MOD=y
+# CONFIG_SCSI_MPT2SAS is not set
+# CONFIG_SCSI_MPT3SAS is not set
+# CONFIG_SCSI_MQ_DEFAULT is not set
+# CONFIG_SCSI_MVSAS is not set
+# CONFIG_SCSI_MVSAS_DEBUG is not set
+# CONFIG_SCSI_MVUMI is not set
+# CONFIG_SCSI_NCR53C406A is not set
+# CONFIG_SCSI_NETLINK is not set
+# CONFIG_SCSI_NSP32 is not set
+# CONFIG_SCSI_OSD_INITIATOR is not set
+# CONFIG_SCSI_PAS16 is not set
+# CONFIG_SCSI_PM8001 is not set
+# CONFIG_SCSI_PMCRAID is not set
+CONFIG_SCSI_PROC_FS=y
+# CONFIG_SCSI_QLA_FC is not set
+# CONFIG_SCSI_QLA_ISCSI is not set
+# CONFIG_SCSI_QLOGIC_1280 is not set
+# CONFIG_SCSI_QLOGIC_FAS is not set
+# CONFIG_SCSI_SAS_ATTRS is not set
+# CONFIG_SCSI_SAS_LIBSAS is not set
+# CONFIG_SCSI_SCAN_ASYNC is not set
+# CONFIG_SCSI_SMARTPQI is not set
+# CONFIG_SCSI_SNIC is not set
+# CONFIG_SCSI_SPI_ATTRS is not set
+# CONFIG_SCSI_SRP_ATTRS is not set
+# CONFIG_SCSI_STEX is not set
+# CONFIG_SCSI_SYM53C416 is not set
+# CONFIG_SCSI_SYM53C8XX_2 is not set
+# CONFIG_SCSI_T128 is not set
+# CONFIG_SCSI_U14_34F is not set
+# CONFIG_SCSI_UFSHCD is not set
+# CONFIG_SCSI_ULTRASTOR is not set
+# CONFIG_SCSI_VIRTIO is not set
+# CONFIG_SCSI_WD719X is not set
+# CONFIG_SCx200_ACB is not set
+# CONFIG_SDIO_UART is not set
+# CONFIG_SD_ADC_MODULATOR is not set
+# CONFIG_SECCOMP is not set
+CONFIG_SECTION_MISMATCH_WARN_ONLY=y
+# CONFIG_SECURITY is not set
+# CONFIG_SECURITYFS is not set
+CONFIG_SECURITY_DMESG_RESTRICT=y
+CONFIG_SELECT_MEMORY_MODEL=y
+# CONFIG_SENSORS_ABITUGURU is not set
+# CONFIG_SENSORS_ABITUGURU3 is not set
+# CONFIG_SENSORS_ACPI_POWER is not set
+# CONFIG_SENSORS_AD7314 is not set
+# CONFIG_SENSORS_AD7414 is not set
+# CONFIG_SENSORS_AD7418 is not set
+# CONFIG_SENSORS_ADC128D818 is not set
+# CONFIG_SENSORS_ADCXX is not set
+# CONFIG_SENSORS_ADM1021 is not set
+# CONFIG_SENSORS_ADM1025 is not set
+# CONFIG_SENSORS_ADM1026 is not set
+# CONFIG_SENSORS_ADM1029 is not set
+# CONFIG_SENSORS_ADM1031 is not set
+# CONFIG_SENSORS_ADM1275 is not set
+# CONFIG_SENSORS_ADM9240 is not set
+# CONFIG_SENSORS_ADS1015 is not set
+# CONFIG_SENSORS_ADS7828 is not set
+# CONFIG_SENSORS_ADS7871 is not set
+# CONFIG_SENSORS_ADT7310 is not set
+# CONFIG_SENSORS_ADT7410 is not set
+# CONFIG_SENSORS_ADT7411 is not set
+# CONFIG_SENSORS_ADT7462 is not set
+# CONFIG_SENSORS_ADT7470 is not set
+# CONFIG_SENSORS_ADT7475 is not set
+# CONFIG_SENSORS_AMC6821 is not set
+# CONFIG_SENSORS_APDS990X is not set
+# CONFIG_SENSORS_APPLESMC is not set
+# CONFIG_SENSORS_ASB100 is not set
+# CONFIG_SENSORS_ASC7621 is not set
+# CONFIG_SENSORS_ASPEED is not set
+# CONFIG_SENSORS_ATK0110 is not set
+# CONFIG_SENSORS_ATXP1 is not set
+# CONFIG_SENSORS_BH1770 is not set
+# CONFIG_SENSORS_BH1780 is not set
+# CONFIG_SENSORS_CORETEMP is not set
+# CONFIG_SENSORS_DELL_SMM is not set
+# CONFIG_SENSORS_DME1737 is not set
+# CONFIG_SENSORS_DS1621 is not set
+# CONFIG_SENSORS_DS620 is not set
+# CONFIG_SENSORS_EMC1403 is not set
+# CONFIG_SENSORS_EMC2103 is not set
+# CONFIG_SENSORS_EMC6W201 is not set
+# CONFIG_SENSORS_F71805F is not set
+# CONFIG_SENSORS_F71882FG is not set
+# CONFIG_SENSORS_F75375S is not set
+# CONFIG_SENSORS_FAM15H_POWER is not set
+# CONFIG_SENSORS_FSCHMD is not set
+# CONFIG_SENSORS_FTSTEUTATES is not set
+# CONFIG_SENSORS_G760A is not set
+# CONFIG_SENSORS_G762 is not set
+# CONFIG_SENSORS_GL518SM is not set
+# CONFIG_SENSORS_GL520SM is not set
+# CONFIG_SENSORS_GPIO_FAN is not set
+# CONFIG_SENSORS_GSC is not set
+# CONFIG_SENSORS_HDAPS is not set
+# CONFIG_SENSORS_HIH6130 is not set
+# CONFIG_SENSORS_HMC5843 is not set
+# CONFIG_SENSORS_HMC5843_I2C is not set
+# CONFIG_SENSORS_HMC5843_SPI is not set
+# CONFIG_SENSORS_HTU21 is not set
+# CONFIG_SENSORS_I5500 is not set
+# CONFIG_SENSORS_I5K_AMB is not set
+# CONFIG_SENSORS_IBM_CFFPS is not set
+# CONFIG_SENSORS_IIO_HWMON is not set
+# CONFIG_SENSORS_INA209 is not set
+# CONFIG_SENSORS_INA2XX is not set
+# CONFIG_SENSORS_INA3221 is not set
+# CONFIG_SENSORS_IR35221 is not set
+# CONFIG_SENSORS_ISL29018 is not set
+# CONFIG_SENSORS_ISL29028 is not set
+# CONFIG_SENSORS_IT87 is not set
+# CONFIG_SENSORS_JC42 is not set
+# CONFIG_SENSORS_K10TEMP is not set
+# CONFIG_SENSORS_K8TEMP is not set
+# CONFIG_SENSORS_LINEAGE is not set
+# CONFIG_SENSORS_LIS3LV02D is not set
+# CONFIG_SENSORS_LIS3_I2C is not set
+# CONFIG_SENSORS_LIS3_SPI is not set
+# CONFIG_SENSORS_LM25066 is not set
+# CONFIG_SENSORS_LM63 is not set
+# CONFIG_SENSORS_LM70 is not set
+# CONFIG_SENSORS_LM73 is not set
+# CONFIG_SENSORS_LM75 is not set
+# CONFIG_SENSORS_LM77 is not set
+# CONFIG_SENSORS_LM78 is not set
+# CONFIG_SENSORS_LM80 is not set
+# CONFIG_SENSORS_LM83 is not set
+# CONFIG_SENSORS_LM85 is not set
+# CONFIG_SENSORS_LM87 is not set
+# CONFIG_SENSORS_LM90 is not set
+# CONFIG_SENSORS_LM92 is not set
+# CONFIG_SENSORS_LM93 is not set
+# CONFIG_SENSORS_LM95234 is not set
+# CONFIG_SENSORS_LM95241 is not set
+# CONFIG_SENSORS_LM95245 is not set
+# CONFIG_SENSORS_LTC2945 is not set
+# CONFIG_SENSORS_LTC2978 is not set
+# CONFIG_SENSORS_LTC2990 is not set
+# CONFIG_SENSORS_LTC3815 is not set
+# CONFIG_SENSORS_LTC4151 is not set
+# CONFIG_SENSORS_LTC4215 is not set
+# CONFIG_SENSORS_LTC4222 is not set
+# CONFIG_SENSORS_LTC4245 is not set
+# CONFIG_SENSORS_LTC4260 is not set
+# CONFIG_SENSORS_LTC4261 is not set
+# CONFIG_SENSORS_MAX1111 is not set
+# CONFIG_SENSORS_MAX16064 is not set
+# CONFIG_SENSORS_MAX16065 is not set
+# CONFIG_SENSORS_MAX1619 is not set
+# CONFIG_SENSORS_MAX1668 is not set
+# CONFIG_SENSORS_MAX197 is not set
+# CONFIG_SENSORS_MAX20751 is not set
+# CONFIG_SENSORS_MAX31722 is not set
+# CONFIG_SENSORS_MAX31785 is not set
+# CONFIG_SENSORS_MAX31790 is not set
+# CONFIG_SENSORS_MAX34440 is not set
+# CONFIG_SENSORS_MAX6621 is not set
+# CONFIG_SENSORS_MAX6639 is not set
+# CONFIG_SENSORS_MAX6642 is not set
+# CONFIG_SENSORS_MAX6650 is not set
+# CONFIG_SENSORS_MAX6697 is not set
+# CONFIG_SENSORS_MAX8688 is not set
+# CONFIG_SENSORS_MCP3021 is not set
+# CONFIG_SENSORS_NCT6683 is not set
+# CONFIG_SENSORS_NCT6775 is not set
+# CONFIG_SENSORS_NCT7802 is not set
+# CONFIG_SENSORS_NCT7904 is not set
+# CONFIG_SENSORS_NPCM7XX is not set
+# CONFIG_SENSORS_NSA320 is not set
+# CONFIG_SENSORS_NTC_THERMISTOR is not set
+# CONFIG_SENSORS_PC87360 is not set
+# CONFIG_SENSORS_PC87427 is not set
+# CONFIG_SENSORS_PCF8591 is not set
+# CONFIG_SENSORS_PMBUS is not set
+# CONFIG_SENSORS_POWR1220 is not set
+# CONFIG_SENSORS_PWM_FAN is not set
+# CONFIG_SENSORS_SCH5627 is not set
+# CONFIG_SENSORS_SCH5636 is not set
+# CONFIG_SENSORS_SCH56XX_COMMON is not set
+# CONFIG_SENSORS_SHT15 is not set
+# CONFIG_SENSORS_SHT21 is not set
+# CONFIG_SENSORS_SHT3x is not set
+# CONFIG_SENSORS_SHTC1 is not set
+# CONFIG_SENSORS_SIS5595 is not set
+# CONFIG_SENSORS_SMM665 is not set
+# CONFIG_SENSORS_SMSC47B397 is not set
+# CONFIG_SENSORS_SMSC47M1 is not set
+# CONFIG_SENSORS_SMSC47M192 is not set
+# CONFIG_SENSORS_STTS751 is not set
+# CONFIG_SENSORS_TC654 is not set
+# CONFIG_SENSORS_TC74 is not set
+# CONFIG_SENSORS_THMC50 is not set
+# CONFIG_SENSORS_TMP102 is not set
+# CONFIG_SENSORS_TMP103 is not set
+# CONFIG_SENSORS_TMP108 is not set
+# CONFIG_SENSORS_TMP401 is not set
+# CONFIG_SENSORS_TMP421 is not set
+# CONFIG_SENSORS_TPS40422 is not set
+# CONFIG_SENSORS_TPS53679 is not set
+# CONFIG_SENSORS_TSL2550 is not set
+# CONFIG_SENSORS_TSL2563 is not set
+# CONFIG_SENSORS_UCD9000 is not set
+# CONFIG_SENSORS_UCD9200 is not set
+# CONFIG_SENSORS_VEXPRESS is not set
+# CONFIG_SENSORS_VIA686A is not set
+# CONFIG_SENSORS_VIA_CPUTEMP is not set
+# CONFIG_SENSORS_VT1211 is not set
+# CONFIG_SENSORS_VT8231 is not set
+# CONFIG_SENSORS_W83627EHF is not set
+# CONFIG_SENSORS_W83627HF is not set
+# CONFIG_SENSORS_W83773G is not set
+# CONFIG_SENSORS_W83781D is not set
+# CONFIG_SENSORS_W83791D is not set
+# CONFIG_SENSORS_W83792D is not set
+# CONFIG_SENSORS_W83793 is not set
+# CONFIG_SENSORS_W83795 is not set
+# CONFIG_SENSORS_W83L785TS is not set
+# CONFIG_SENSORS_W83L786NG is not set
+# CONFIG_SENSORS_XGENE is not set
+# CONFIG_SENSORS_ZL6100 is not set
+CONFIG_SERIAL_8250=y
+# CONFIG_SERIAL_8250_ACCENT is not set
+# CONFIG_SERIAL_8250_ASPEED_VUART is not set
+# CONFIG_SERIAL_8250_BOCA is not set
+CONFIG_SERIAL_8250_CONSOLE=y
+# CONFIG_SERIAL_8250_CS is not set
+# CONFIG_SERIAL_8250_DEPRECATED_OPTIONS is not set
+# CONFIG_SERIAL_8250_DETECT_IRQ is not set
+CONFIG_SERIAL_8250_DMA=y
+# CONFIG_SERIAL_8250_DW is not set
+# CONFIG_SERIAL_8250_EM is not set
+# CONFIG_SERIAL_8250_EXAR is not set
+# CONFIG_SERIAL_8250_EXAR_ST16C554 is not set
+# CONFIG_SERIAL_8250_EXTENDED is not set
+# CONFIG_SERIAL_8250_FINTEK is not set
+# CONFIG_SERIAL_8250_FOURPORT is not set
+# CONFIG_SERIAL_8250_HUB6 is not set
+# CONFIG_SERIAL_8250_INGENIC is not set
+# CONFIG_SERIAL_8250_LPSS is not set
+# CONFIG_SERIAL_8250_MANY_PORTS is not set
+# CONFIG_SERIAL_8250_MID is not set
+# CONFIG_SERIAL_8250_MOXA is not set
+CONFIG_SERIAL_8250_NR_UARTS=2
+# CONFIG_SERIAL_8250_PCI is not set
+# CONFIG_SERIAL_8250_RSA is not set
+# CONFIG_SERIAL_8250_RT288X is not set
+CONFIG_SERIAL_8250_RUNTIME_UARTS=2
+# CONFIG_SERIAL_ALTERA_JTAGUART is not set
+# CONFIG_SERIAL_ALTERA_UART is not set
+# CONFIG_SERIAL_AMBA_PL010 is not set
+# CONFIG_SERIAL_ARC is not set
+# CONFIG_SERIAL_BCM63XX is not set
+# CONFIG_SERIAL_CONEXANT_DIGICOLOR is not set
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+# CONFIG_SERIAL_DEV_BUS is not set
+CONFIG_SERIAL_EARLYCON=y
+# CONFIG_SERIAL_EARLYCON_ARM_SEMIHOST is not set
+# CONFIG_SERIAL_FSL_LPUART is not set
+# CONFIG_SERIAL_GRLIB_GAISLER_APBUART is not set
+# CONFIG_SERIAL_IFX6X60 is not set
+# CONFIG_SERIAL_JSM is not set
+# CONFIG_SERIAL_MAX3100 is not set
+# CONFIG_SERIAL_MAX310X is not set
+# CONFIG_SERIAL_NONSTANDARD is not set
+# CONFIG_SERIAL_OF_PLATFORM is not set
+# CONFIG_SERIAL_OF_PLATFORM_NWPSERIAL is not set
+# CONFIG_SERIAL_PCH_UART is not set
+# CONFIG_SERIAL_RP2 is not set
+# CONFIG_SERIAL_SC16IS7XX is not set
+# CONFIG_SERIAL_SCCNXP is not set
+# CONFIG_SERIAL_SH_SCI is not set
+# CONFIG_SERIAL_STM32 is not set
+# CONFIG_SERIAL_ST_ASC is not set
+# CONFIG_SERIAL_TIMBERDALE is not set
+# CONFIG_SERIAL_UARTLITE is not set
+# CONFIG_SERIAL_XILINX_PS_UART is not set
+# CONFIG_SERIO is not set
+# CONFIG_SERIO_ALTERA_PS2 is not set
+# CONFIG_SERIO_AMBAKMI is not set
+# CONFIG_SERIO_APBPS2 is not set
+# CONFIG_SERIO_ARC_PS2 is not set
+# CONFIG_SERIO_CT82C710 is not set
+# CONFIG_SERIO_GPIO_PS2 is not set
+# CONFIG_SERIO_I8042 is not set
+# CONFIG_SERIO_LIBPS2 is not set
+# CONFIG_SERIO_PARKBD is not set
+# CONFIG_SERIO_PCIPS2 is not set
+# CONFIG_SERIO_PS2MULT is not set
+# CONFIG_SERIO_RAW is not set
+# CONFIG_SERIO_SERPORT is not set
+# CONFIG_SERIO_SUN4I_PS2 is not set
+# CONFIG_SFC is not set
+# CONFIG_SFC_FALCON is not set
+# CONFIG_SFI is not set
+# CONFIG_SFP is not set
+# CONFIG_SGETMASK_SYSCALL is not set
+# CONFIG_SGI_IOC4 is not set
+# CONFIG_SGI_IP22 is not set
+# CONFIG_SGI_IP27 is not set
+# CONFIG_SGI_IP28 is not set
+# CONFIG_SGI_IP32 is not set
+# CONFIG_SGI_PARTITION is not set
+# CONFIG_SG_POOL is not set
+# CONFIG_SG_SPLIT is not set
+CONFIG_SHMEM=y
+# CONFIG_SH_ETH is not set
+# CONFIG_SH_TIMER_CMT is not set
+# CONFIG_SH_TIMER_MTU2 is not set
+# CONFIG_SH_TIMER_TMU is not set
+# CONFIG_SI1133 is not set
+# CONFIG_SI1145 is not set
+# CONFIG_SI7005 is not set
+# CONFIG_SI7020 is not set
+# CONFIG_SIBYTE_BIGSUR is not set
+# CONFIG_SIBYTE_CARMEL is not set
+# CONFIG_SIBYTE_CRHINE is not set
+# CONFIG_SIBYTE_CRHONE is not set
+# CONFIG_SIBYTE_LITTLESUR is not set
+# CONFIG_SIBYTE_RHONE is not set
+# CONFIG_SIBYTE_SENTOSA is not set
+# CONFIG_SIBYTE_SWARM is not set
+CONFIG_SIGNALFD=y
+# CONFIG_SIGNED_PE_FILE_VERIFICATION is not set
+# CONFIG_SIMPLE_GPIO is not set
+# CONFIG_SIMPLE_PM_BUS is not set
+# CONFIG_SIOX is not set
+# CONFIG_SIS190 is not set
+# CONFIG_SIS900 is not set
+# CONFIG_SKGE is not set
+# CONFIG_SKY2 is not set
+# CONFIG_SKY2_DEBUG is not set
+# CONFIG_SLAB is not set
+CONFIG_SLABINFO=y
+# CONFIG_SLAB_FREELIST_HARDENED is not set
+# CONFIG_SLAB_FREELIST_RANDOM is not set
+CONFIG_SLAB_MERGE_DEFAULT=y
+# CONFIG_SLHC is not set
+# CONFIG_SLICOSS is not set
+# CONFIG_SLIMBUS is not set
+# CONFIG_SLIP is not set
+# CONFIG_SLOB is not set
+CONFIG_SLUB=y
+CONFIG_SLUB_CPU_PARTIAL=y
+# CONFIG_SLUB_DEBUG is not set
+# CONFIG_SLUB_DEBUG_ON is not set
+# CONFIG_SLUB_MEMCG_SYSFS_ON is not set
+# CONFIG_SLUB_STATS is not set
+# CONFIG_SMARTJOYPLUS_FF is not set
+# CONFIG_SMC911X is not set
+# CONFIG_SMC9194 is not set
+# CONFIG_SMC91X is not set
+# CONFIG_SMP is not set
+# CONFIG_SMSC911X is not set
+# CONFIG_SMSC9420 is not set
+# CONFIG_SMSC_PHY is not set
+# CONFIG_SM_FTL is not set
+# CONFIG_SND is not set
+# CONFIG_SND_AC97_POWER_SAVE is not set
+# CONFIG_SND_AD1816A is not set
+# CONFIG_SND_AD1848 is not set
+# CONFIG_SND_AD1889 is not set
+# CONFIG_SND_ADLIB is not set
+# CONFIG_SND_ALI5451 is not set
+# CONFIG_SND_ALOOP is not set
+# CONFIG_SND_ALS100 is not set
+# CONFIG_SND_ALS300 is not set
+# CONFIG_SND_ALS4000 is not set
+# CONFIG_SND_ARM is not set
+# CONFIG_SND_ASIHPI is not set
+# CONFIG_SND_ATIIXP is not set
+# CONFIG_SND_ATIIXP_MODEM is not set
+# CONFIG_SND_ATMEL_AC97C is not set
+# CONFIG_SND_ATMEL_SOC is not set
+# CONFIG_SND_AU8810 is not set
+# CONFIG_SND_AU8820 is not set
+# CONFIG_SND_AU8830 is not set
+# CONFIG_SND_AUDIO_GRAPH_CARD is not set
+# CONFIG_SND_AUDIO_GRAPH_SCU_CARD is not set
+# CONFIG_SND_AW2 is not set
+# CONFIG_SND_AZT2320 is not set
+# CONFIG_SND_AZT3328 is not set
+# CONFIG_SND_BCD2000 is not set
+# CONFIG_SND_BT87X is not set
+# CONFIG_SND_CA0106 is not set
+# CONFIG_SND_CMI8330 is not set
+# CONFIG_SND_CMIPCI is not set
+# CONFIG_SND_CS4231 is not set
+# CONFIG_SND_CS4236 is not set
+# CONFIG_SND_CS4281 is not set
+# CONFIG_SND_CS46XX is not set
+# CONFIG_SND_CS5530 is not set
+# CONFIG_SND_CS5535AUDIO is not set
+# CONFIG_SND_CTXFI is not set
+# CONFIG_SND_DARLA20 is not set
+# CONFIG_SND_DARLA24 is not set
+# CONFIG_SND_DEBUG is not set
+# CONFIG_SND_DESIGNWARE_I2S is not set
+CONFIG_SND_DRIVERS=y
+# CONFIG_SND_DUMMY is not set
+# CONFIG_SND_DYNAMIC_MINORS is not set
+# CONFIG_SND_ECHO3G is not set
+# CONFIG_SND_EDMA_SOC is not set
+# CONFIG_SND_EMU10K1 is not set
+# CONFIG_SND_EMU10K1X is not set
+# CONFIG_SND_EMU10K1_SEQ is not set
+# CONFIG_SND_ENS1370 is not set
+# CONFIG_SND_ENS1371 is not set
+# CONFIG_SND_ES1688 is not set
+# CONFIG_SND_ES18XX is not set
+# CONFIG_SND_ES1938 is not set
+# CONFIG_SND_ES1968 is not set
+# CONFIG_SND_FIREWIRE is not set
+# CONFIG_SND_FM801 is not set
+# CONFIG_SND_GINA20 is not set
+# CONFIG_SND_GINA24 is not set
+# CONFIG_SND_GUSCLASSIC is not set
+# CONFIG_SND_GUSEXTREME is not set
+# CONFIG_SND_GUSMAX is not set
+# CONFIG_SND_HDA_INTEL is not set
+CONFIG_SND_HDA_POWER_SAVE_DEFAULT=0
+CONFIG_SND_HDA_PREALLOC_SIZE=64
+# CONFIG_SND_HDSP is not set
+# CONFIG_SND_HDSPM is not set
+# CONFIG_SND_HRTIMER is not set
+# CONFIG_SND_HWDEP is not set
+# CONFIG_SND_I2S_HI6210_I2S is not set
+# CONFIG_SND_ICE1712 is not set
+# CONFIG_SND_ICE1724 is not set
+# CONFIG_SND_INDIGO is not set
+# CONFIG_SND_INDIGODJ is not set
+# CONFIG_SND_INDIGODJX is not set
+# CONFIG_SND_INDIGOIO is not set
+# CONFIG_SND_INDIGOIOX is not set
+# CONFIG_SND_INTEL8X0 is not set
+# CONFIG_SND_INTEL8X0M is not set
+# CONFIG_SND_INTERWAVE is not set
+# CONFIG_SND_INTERWAVE_STB is not set
+# CONFIG_SND_ISA is not set
+# CONFIG_SND_KIRKWOOD_SOC is not set
+# CONFIG_SND_KORG1212 is not set
+# CONFIG_SND_LAYLA20 is not set
+# CONFIG_SND_LAYLA24 is not set
+# CONFIG_SND_LOLA is not set
+# CONFIG_SND_LX6464ES is not set
+# CONFIG_SND_MAESTRO3 is not set
+CONFIG_SND_MAX_CARDS=16
+# CONFIG_SND_MIA is not set
+# CONFIG_SND_MIPS is not set
+# CONFIG_SND_MIRO is not set
+# CONFIG_SND_MIXART is not set
+# CONFIG_SND_MIXER_OSS is not set
+# CONFIG_SND_MONA is not set
+# CONFIG_SND_MPC52xx_SOC_EFIKA is not set
+# CONFIG_SND_MPU401 is not set
+# CONFIG_SND_MTPAV is not set
+# CONFIG_SND_MTS64 is not set
+# CONFIG_SND_MXS_SOC is not set
+# CONFIG_SND_NM256 is not set
+# CONFIG_SND_OPL3SA2 is not set
+# CONFIG_SND_OPL3_LIB_SEQ is not set
+# CONFIG_SND_OPL4_LIB_SEQ is not set
+# CONFIG_SND_OPTI92X_AD1848 is not set
+# CONFIG_SND_OPTI92X_CS4231 is not set
+# CONFIG_SND_OPTI93X is not set
+CONFIG_SND_OSSEMUL=y
+# CONFIG_SND_OXYGEN is not set
+CONFIG_SND_PCI=y
+# CONFIG_SND_PCM is not set
+# CONFIG_SND_PCMCIA is not set
+# CONFIG_SND_PCM_OSS is not set
+CONFIG_SND_PCM_OSS_PLUGINS=y
+# CONFIG_SND_PCM_TIMER is not set
+# CONFIG_SND_PCM_XRUN_DEBUG is not set
+# CONFIG_SND_PCXHR is not set
+# CONFIG_SND_PDAUDIOCF is not set
+# CONFIG_SND_PORTMAN2X4 is not set
+# CONFIG_SND_POWERPC_SOC is not set
+# CONFIG_SND_PPC is not set
+CONFIG_SND_PROC_FS=y
+# CONFIG_SND_RAWMIDI is not set
+# CONFIG_SND_RAWMIDI_SEQ is not set
+# CONFIG_SND_RIPTIDE is not set
+# CONFIG_SND_RME32 is not set
+# CONFIG_SND_RME96 is not set
+# CONFIG_SND_RME9652 is not set
+# CONFIG_SND_RTCTIMER is not set
+# CONFIG_SND_SB16 is not set
+# CONFIG_SND_SB8 is not set
+# CONFIG_SND_SBAWE is not set
+# CONFIG_SND_SBAWE_SEQ is not set
+# CONFIG_SND_SE6X is not set
+# CONFIG_SND_SEQUENCER is not set
+# CONFIG_SND_SERIAL_U16550 is not set
+# CONFIG_SND_SIMPLE_CARD is not set
+# CONFIG_SND_SIMPLE_SCU_CARD is not set
+# CONFIG_SND_SIS7019 is not set
+# CONFIG_SND_SOC is not set
+# CONFIG_SND_SOC_AC97_CODEC is not set
+# CONFIG_SND_SOC_ADAU1701 is not set
+# CONFIG_SND_SOC_ADAU1761_I2C is not set
+# CONFIG_SND_SOC_ADAU1761_SPI is not set
+# CONFIG_SND_SOC_ADAU7002 is not set
+# CONFIG_SND_SOC_AK4104 is not set
+# CONFIG_SND_SOC_AK4458 is not set
+# CONFIG_SND_SOC_AK4554 is not set
+# CONFIG_SND_SOC_AK4613 is not set
+# CONFIG_SND_SOC_AK4642 is not set
+# CONFIG_SND_SOC_AK5386 is not set
+# CONFIG_SND_SOC_AK5558 is not set
+# CONFIG_SND_SOC_ALC5623 is not set
+# CONFIG_SND_SOC_AMD_ACP is not set
+# CONFIG_SND_SOC_AU1XAUDIO is not set
+# CONFIG_SND_SOC_AU1XPSC is not set
+# CONFIG_SND_SOC_BD28623 is not set
+# CONFIG_SND_SOC_BT_SCO is not set
+# CONFIG_SND_SOC_CS35L32 is not set
+# CONFIG_SND_SOC_CS35L33 is not set
+# CONFIG_SND_SOC_CS35L34 is not set
+# CONFIG_SND_SOC_CS35L35 is not set
+# CONFIG_SND_SOC_CS4265 is not set
+# CONFIG_SND_SOC_CS4270 is not set
+# CONFIG_SND_SOC_CS4271 is not set
+# CONFIG_SND_SOC_CS4271_I2C is not set
+# CONFIG_SND_SOC_CS4271_SPI is not set
+# CONFIG_SND_SOC_CS42L42 is not set
+# CONFIG_SND_SOC_CS42L51_I2C is not set
+# CONFIG_SND_SOC_CS42L52 is not set
+# CONFIG_SND_SOC_CS42L56 is not set
+# CONFIG_SND_SOC_CS42L73 is not set
+# CONFIG_SND_SOC_CS42XX8_I2C is not set
+# CONFIG_SND_SOC_CS43130 is not set
+# CONFIG_SND_SOC_CS4349 is not set
+# CONFIG_SND_SOC_CS53L30 is not set
+# CONFIG_SND_SOC_DIO2125 is not set
+# CONFIG_SND_SOC_ES7134 is not set
+# CONFIG_SND_SOC_ES7241 is not set
+# CONFIG_SND_SOC_ES8316 is not set
+# CONFIG_SND_SOC_ES8328 is not set
+# CONFIG_SND_SOC_ES8328_I2C is not set
+# CONFIG_SND_SOC_ES8328_SPI is not set
+# CONFIG_SND_SOC_EUKREA_TLV320 is not set
+# CONFIG_SND_SOC_FSL_ASOC_CARD is not set
+# CONFIG_SND_SOC_FSL_ASRC is not set
+# CONFIG_SND_SOC_FSL_ESAI is not set
+# CONFIG_SND_SOC_FSL_SAI is not set
+# CONFIG_SND_SOC_FSL_SPDIF is not set
+# CONFIG_SND_SOC_FSL_SSI is not set
+# CONFIG_SND_SOC_GTM601 is not set
+# CONFIG_SND_SOC_ICS43432 is not set
+# CONFIG_SND_SOC_IMG is not set
+# CONFIG_SND_SOC_IMX_AUDMUX is not set
+# CONFIG_SND_SOC_IMX_ES8328 is not set
+# CONFIG_SND_SOC_IMX_SPDIF is not set
+# CONFIG_SND_SOC_IMX_WM8962 is not set
+# CONFIG_SND_SOC_INNO_RK3036 is not set
+# CONFIG_SND_SOC_INTEL_BAYTRAIL is not set
+# CONFIG_SND_SOC_INTEL_BDW_RT5677_MACH is not set
+# CONFIG_SND_SOC_INTEL_BXT_DA7219_MAX98357A_MACH is not set
+# CONFIG_SND_SOC_INTEL_BXT_RT298_MACH is not set
+# CONFIG_SND_SOC_INTEL_BYTCR_RT5640_MACH is not set
+# CONFIG_SND_SOC_INTEL_BYTCR_RT5651_MACH is not set
+# CONFIG_SND_SOC_INTEL_BYT_CHT_DA7213_MACH is not set
+# CONFIG_SND_SOC_INTEL_BYT_CHT_ES8316_MACH is not set
+# CONFIG_SND_SOC_INTEL_BYT_CHT_NOCODEC_MACH is not set
+# CONFIG_SND_SOC_INTEL_BYT_MAX98090_MACH is not set
+# CONFIG_SND_SOC_INTEL_BYT_RT5640_MACH is not set
+# CONFIG_SND_SOC_INTEL_CHT_BSW_MAX98090_TI_MACH is not set
+# CONFIG_SND_SOC_INTEL_CHT_BSW_NAU8824_MACH is not set
+# CONFIG_SND_SOC_INTEL_CHT_BSW_RT5645_MACH is not set
+# CONFIG_SND_SOC_INTEL_CHT_BSW_RT5672_MACH is not set
+# CONFIG_SND_SOC_INTEL_HASWELL is not set
+# CONFIG_SND_SOC_INTEL_KBL_RT5663_MAX98927_MACH is not set
+# CONFIG_SND_SOC_INTEL_KBL_RT5663_RT5514_MAX98927_MACH is not set
+# CONFIG_SND_SOC_INTEL_SKL_NAU88L25_MAX98357A_MACH is not set
+# CONFIG_SND_SOC_INTEL_SKL_NAU88L25_SSM4567_MACH is not set
+# CONFIG_SND_SOC_INTEL_SKL_RT286_MACH is not set
+# CONFIG_SND_SOC_INTEL_SKYLAKE is not set
+# CONFIG_SND_SOC_INTEL_SST is not set
+CONFIG_SND_SOC_INTEL_SST_TOPLEVEL=y
+# CONFIG_SND_SOC_MAX9759 is not set
+# CONFIG_SND_SOC_MAX98373 is not set
+# CONFIG_SND_SOC_MAX98504 is not set
+# CONFIG_SND_SOC_MAX9860 is not set
+# CONFIG_SND_SOC_MAX9867 is not set
+# CONFIG_SND_SOC_MAX98927 is not set
+# CONFIG_SND_SOC_MEDIATEK is not set
+# CONFIG_SND_SOC_MPC5200_AC97 is not set
+# CONFIG_SND_SOC_MPC5200_I2S is not set
+# CONFIG_SND_SOC_MSM8916_WCD_ANALOG is not set
+# CONFIG_SND_SOC_MSM8916_WCD_DIGITAL is not set
+# CONFIG_SND_SOC_MT2701 is not set
+# CONFIG_SND_SOC_MT6351 is not set
+# CONFIG_SND_SOC_MT8173 is not set
+# CONFIG_SND_SOC_NAU8540 is not set
+# CONFIG_SND_SOC_NAU8810 is not set
+# CONFIG_SND_SOC_NAU8824 is not set
+# CONFIG_SND_SOC_PCM1681 is not set
+# CONFIG_SND_SOC_PCM1789_I2C is not set
+# CONFIG_SND_SOC_PCM1792A is not set
+# CONFIG_SND_SOC_PCM179X_I2C is not set
+# CONFIG_SND_SOC_PCM179X_SPI is not set
+# CONFIG_SND_SOC_PCM186X_I2C is not set
+# CONFIG_SND_SOC_PCM186X_SPI is not set
+# CONFIG_SND_SOC_PCM3168A_I2C is not set
+# CONFIG_SND_SOC_PCM3168A_SPI is not set
+# CONFIG_SND_SOC_PCM512x_I2C is not set
+# CONFIG_SND_SOC_PCM512x_SPI is not set
+# CONFIG_SND_SOC_QCOM is not set
+# CONFIG_SND_SOC_RT5616 is not set
+# CONFIG_SND_SOC_RT5631 is not set
+# CONFIG_SND_SOC_RT5677_SPI is not set
+# CONFIG_SND_SOC_SGTL5000 is not set
+# CONFIG_SND_SOC_SIMPLE_AMPLIFIER is not set
+# CONFIG_SND_SOC_SIRF_AUDIO_CODEC is not set
+# CONFIG_SND_SOC_SPDIF is not set
+# CONFIG_SND_SOC_SSM2305 is not set
+# CONFIG_SND_SOC_SSM2602_I2C is not set
+# CONFIG_SND_SOC_SSM2602_SPI is not set
+# CONFIG_SND_SOC_SSM4567 is not set
+# CONFIG_SND_SOC_STA32X is not set
+# CONFIG_SND_SOC_STA350 is not set
+# CONFIG_SND_SOC_STI_SAS is not set
+# CONFIG_SND_SOC_TAS2552 is not set
+# CONFIG_SND_SOC_TAS5086 is not set
+# CONFIG_SND_SOC_TAS571X is not set
+# CONFIG_SND_SOC_TAS5720 is not set
+# CONFIG_SND_SOC_TAS6424 is not set
+# CONFIG_SND_SOC_TDA7419 is not set
+# CONFIG_SND_SOC_TFA9879 is not set
+# CONFIG_SND_SOC_TLV320AIC23_I2C is not set
+# CONFIG_SND_SOC_TLV320AIC23_SPI is not set
+# CONFIG_SND_SOC_TLV320AIC31XX is not set
+# CONFIG_SND_SOC_TLV320AIC32X4_I2C is not set
+# CONFIG_SND_SOC_TLV320AIC32X4_SPI is not set
+# CONFIG_SND_SOC_TLV320AIC3X is not set
+# CONFIG_SND_SOC_TPA6130A2 is not set
+# CONFIG_SND_SOC_TS3A227E is not set
+# CONFIG_SND_SOC_TSCS42XX is not set
+# CONFIG_SND_SOC_TSCS454 is not set
+# CONFIG_SND_SOC_WM8510 is not set
+# CONFIG_SND_SOC_WM8523 is not set
+# CONFIG_SND_SOC_WM8524 is not set
+# CONFIG_SND_SOC_WM8580 is not set
+# CONFIG_SND_SOC_WM8711 is not set
+# CONFIG_SND_SOC_WM8728 is not set
+# CONFIG_SND_SOC_WM8731 is not set
+# CONFIG_SND_SOC_WM8737 is not set
+# CONFIG_SND_SOC_WM8741 is not set
+# CONFIG_SND_SOC_WM8750 is not set
+# CONFIG_SND_SOC_WM8753 is not set
+# CONFIG_SND_SOC_WM8770 is not set
+# CONFIG_SND_SOC_WM8776 is not set
+# CONFIG_SND_SOC_WM8782 is not set
+# CONFIG_SND_SOC_WM8804_I2C is not set
+# CONFIG_SND_SOC_WM8804_SPI is not set
+# CONFIG_SND_SOC_WM8903 is not set
+# CONFIG_SND_SOC_WM8960 is not set
+# CONFIG_SND_SOC_WM8962 is not set
+# CONFIG_SND_SOC_WM8974 is not set
+# CONFIG_SND_SOC_WM8978 is not set
+# CONFIG_SND_SOC_WM8985 is not set
+# CONFIG_SND_SOC_XTFPGA_I2S is not set
+# CONFIG_SND_SOC_ZX_AUD96P22 is not set
+# CONFIG_SND_SONICVIBES is not set
+# CONFIG_SND_SPI is not set
+# CONFIG_SND_SSCAPE is not set
+# CONFIG_SND_SST_ATOM_HIFI2_PLATFORM_ACPI is not set
+# CONFIG_SND_SST_ATOM_HIFI2_PLATFORM_PCI is not set
+# CONFIG_SND_SUN4I_CODEC is not set
+# CONFIG_SND_SUPPORT_OLD_API is not set
+# CONFIG_SND_TIMER is not set
+# CONFIG_SND_TRIDENT is not set
+CONFIG_SND_USB=y
+# CONFIG_SND_USB_6FIRE is not set
+# CONFIG_SND_USB_AUDIO is not set
+# CONFIG_SND_USB_CAIAQ is not set
+# CONFIG_SND_USB_HIFACE is not set
+# CONFIG_SND_USB_POD is not set
+# CONFIG_SND_USB_PODHD is not set
+# CONFIG_SND_USB_TONEPORT is not set
+# CONFIG_SND_USB_UA101 is not set
+# CONFIG_SND_USB_US122L is not set
+# CONFIG_SND_USB_USX2Y is not set
+# CONFIG_SND_USB_VARIAX is not set
+# CONFIG_SND_VERBOSE_PRINTK is not set
+CONFIG_SND_VERBOSE_PROCFS=y
+# CONFIG_SND_VIA82XX is not set
+# CONFIG_SND_VIA82XX_MODEM is not set
+# CONFIG_SND_VIRTUOSO is not set
+# CONFIG_SND_VX222 is not set
+# CONFIG_SND_VXPOCKET is not set
+# CONFIG_SND_WAVEFRONT is not set
+CONFIG_SND_X86=y
+# CONFIG_SND_XEN_FRONTEND is not set
+# CONFIG_SND_YMFPCI is not set
+# CONFIG_SNI_RM is not set
+# CONFIG_SOCIONEXT_SYNQUACER_PREITS is not set
+# CONFIG_SOCK_CGROUP_DATA is not set
+# CONFIG_SOC_AM33XX is not set
+# CONFIG_SOC_AM43XX is not set
+# CONFIG_SOC_BRCMSTB is not set
+# CONFIG_SOC_CAMERA is not set
+# CONFIG_SOC_DRA7XX is not set
+# CONFIG_SOC_HAS_OMAP2_SDRC is not set
+# CONFIG_SOC_OMAP5 is not set
+# CONFIG_SOC_TI is not set
+# CONFIG_SOFTLOCKUP_DETECTOR is not set
+# CONFIG_SOFT_WATCHDOG is not set
+# CONFIG_SOLARIS_X86_PARTITION is not set
+# CONFIG_SONYPI is not set
+# CONFIG_SONY_LAPTOP is not set
+# CONFIG_SOUND is not set
+# CONFIG_SOUNDWIRE is not set
+# CONFIG_SOUND_OSS_CORE is not set
+# CONFIG_SOUND_PRIME is not set
+# CONFIG_SP5100_TCO is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_STATIC is not set
+# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
+# CONFIG_SPARSE_IRQ is not set
+# CONFIG_SPARSE_RCU_POINTER is not set
+# CONFIG_SPEAKUP is not set
+# CONFIG_SPI is not set
+# CONFIG_SPINLOCK_TEST is not set
+# CONFIG_SPI_ALTERA is not set
+# CONFIG_SPI_AU1550 is not set
+# CONFIG_SPI_AXI_SPI_ENGINE is not set
+# CONFIG_SPI_BCM2835 is not set
+# CONFIG_SPI_BCM_QSPI is not set
+# CONFIG_SPI_BITBANG is not set
+# CONFIG_SPI_BUTTERFLY is not set
+# CONFIG_SPI_CADENCE is not set
+# CONFIG_SPI_CADENCE_QUADSPI is not set
+# CONFIG_SPI_DEBUG is not set
+# CONFIG_SPI_DESIGNWARE is not set
+# CONFIG_SPI_FSL_DSPI is not set
+# CONFIG_SPI_FSL_ESPI is not set
+# CONFIG_SPI_FSL_SPI is not set
+# CONFIG_SPI_GPIO is not set
+# CONFIG_SPI_GPIO_OLD is not set
+# CONFIG_SPI_IMG_SPFI is not set
+# CONFIG_SPI_LM70_LLP is not set
+# CONFIG_SPI_LOOPBACK_TEST is not set
+# CONFIG_SPI_MASTER is not set
+# CONFIG_SPI_MEM is not set
+# CONFIG_SPI_MPC52xx is not set
+# CONFIG_SPI_MPC52xx_PSC is not set
+# CONFIG_SPI_OCTEON is not set
+# CONFIG_SPI_OC_TINY is not set
+# CONFIG_SPI_ORION is not set
+# CONFIG_SPI_PL022 is not set
+# CONFIG_SPI_PPC4xx is not set
+# CONFIG_SPI_PXA2XX is not set
+# CONFIG_SPI_PXA2XX_PCI is not set
+# CONFIG_SPI_ROCKCHIP is not set
+# CONFIG_SPI_S3C64XX is not set
+# CONFIG_SPI_SC18IS602 is not set
+# CONFIG_SPI_SLAVE is not set
+# CONFIG_SPI_SPIDEV is not set
+# CONFIG_SPI_THUNDERX is not set
+# CONFIG_SPI_TI_QSPI is not set
+# CONFIG_SPI_TLE62X0 is not set
+# CONFIG_SPI_TOPCLIFF_PCH is not set
+# CONFIG_SPI_XCOMM is not set
+# CONFIG_SPI_XILINX is not set
+# CONFIG_SPI_XWAY is not set
+# CONFIG_SPI_ZYNQMP_GQSPI is not set
+CONFIG_SPLIT_PTLOCK_CPUS=4
+# CONFIG_SPMI is not set
+CONFIG_SQUASHFS=y
+# CONFIG_SQUASHFS_4K_DEVBLK_SIZE is not set
+# CONFIG_SQUASHFS_DECOMP_MULTI is not set
+CONFIG_SQUASHFS_DECOMP_MULTI_PERCPU=y
+# CONFIG_SQUASHFS_DECOMP_SINGLE is not set
+CONFIG_SQUASHFS_EMBEDDED=y
+# CONFIG_SQUASHFS_FILE_CACHE is not set
+CONFIG_SQUASHFS_FILE_DIRECT=y
+CONFIG_SQUASHFS_FRAGMENT_CACHE_SIZE=3
+# CONFIG_SQUASHFS_LZ4 is not set
+# CONFIG_SQUASHFS_LZO is not set
+# CONFIG_SQUASHFS_XATTR is not set
+CONFIG_SQUASHFS_XZ=y
+# CONFIG_SQUASHFS_ZLIB is not set
+# CONFIG_SQUASHFS_ZSTD is not set
+# CONFIG_SRAM is not set
+# CONFIG_SRF04 is not set
+# CONFIG_SRF08 is not set
+# CONFIG_SSB is not set
+# CONFIG_SSB_DEBUG is not set
+# CONFIG_SSB_DRIVER_GPIO is not set
+# CONFIG_SSB_HOST_SOC is not set
+# CONFIG_SSB_PCMCIAHOST is not set
+CONFIG_SSB_POSSIBLE=y
+# CONFIG_SSB_SDIOHOST is not set
+# CONFIG_SSB_SILENT is not set
+# CONFIG_SSFDC is not set
+# CONFIG_STACKPROTECTOR is not set
+# CONFIG_STACKPROTECTOR_STRONG is not set
+# CONFIG_STACKTRACE is not set
+CONFIG_STACKTRACE_SUPPORT=y
+# CONFIG_STACK_TRACER is not set
+# CONFIG_STACK_VALIDATION is not set
+CONFIG_STAGING=y
+# CONFIG_STAGING_BOARD is not set
+# CONFIG_STAGING_GASKET_FRAMEWORK is not set
+# CONFIG_STAGING_MEDIA is not set
+CONFIG_STANDALONE=y
+# CONFIG_STATIC_KEYS_SELFTEST is not set
+# CONFIG_STATIC_USERMODEHELPER is not set
+CONFIG_STDBINUTILS=y
+# CONFIG_STE10XP is not set
+# CONFIG_STE_MODEM_RPROC is not set
+# CONFIG_STK3310 is not set
+# CONFIG_STK8312 is not set
+# CONFIG_STK8BA50 is not set
+# CONFIG_STM is not set
+# CONFIG_STMMAC_ETH is not set
+# CONFIG_STMMAC_PCI is not set
+# CONFIG_STMMAC_PLATFORM is not set
+# CONFIG_STM_DUMMY is not set
+# CONFIG_STM_SOURCE_CONSOLE is not set
+CONFIG_STP=y
+# CONFIG_STREAM_PARSER is not set
+# CONFIG_STRICT_DEVMEM is not set
+CONFIG_STRICT_KERNEL_RWX=y
+CONFIG_STRICT_MODULE_RWX=y
+# CONFIG_STRING_SELFTEST is not set
+CONFIG_STRIP_ASM_SYMS=y
+# CONFIG_STX104 is not set
+# CONFIG_ST_UVIS25 is not set
+# CONFIG_SUN4I_GPADC is not set
+# CONFIG_SUN50I_DE2_BUS is not set
+# CONFIG_SUN50I_ERRATUM_UNKNOWN1 is not set
+# CONFIG_SUNDANCE is not set
+# CONFIG_SUNGEM is not set
+# CONFIG_SUNRPC is not set
+# CONFIG_SUNRPC_DEBUG is not set
+# CONFIG_SUNRPC_GSS is not set
+# CONFIG_SUNXI_SRAM is not set
+# CONFIG_SUN_PARTITION is not set
+# CONFIG_SURFACE_3_BUTTON is not set
+# CONFIG_SUSPEND is not set
+# CONFIG_SUSPEND_SKIP_SYNC is not set
+CONFIG_SWAP=y
+# CONFIG_SWCONFIG is not set
+# CONFIG_SWCONFIG_B53 is not set
+# CONFIG_SWCONFIG_B53_MDIO_DRIVER is not set
+# CONFIG_SWCONFIG_B53_MMAP_DRIVER is not set
+# CONFIG_SWCONFIG_B53_SPI_DRIVER is not set
+# CONFIG_SWCONFIG_B53_SRAB_DRIVER is not set
+# CONFIG_SWCONFIG_LEDS is not set
+# CONFIG_SW_SYNC is not set
+# CONFIG_SX9500 is not set
+# CONFIG_SXGBE_ETH is not set
+# CONFIG_SYNCLINK_CS is not set
+# CONFIG_SYNC_FILE is not set
+# CONFIG_SYNOPSYS_DWC_ETH_QOS is not set
+CONFIG_SYN_COOKIES=y
+# CONFIG_SYSCON_REBOOT_MODE is not set
+CONFIG_SYSCTL=y
+# CONFIG_SYSCTL_SYSCALL is not set
+CONFIG_SYSFS=y
+# CONFIG_SYSFS_DEPRECATED is not set
+# CONFIG_SYSFS_DEPRECATED_V2 is not set
+# CONFIG_SYSFS_SYSCALL is not set
+# CONFIG_SYSTEMPORT is not set
+# CONFIG_SYSTEM_BLACKLIST_KEYRING is not set
+# CONFIG_SYSTEM_DATA_VERIFICATION is not set
+# CONFIG_SYSTEM_TRUSTED_KEYRING is not set
+CONFIG_SYSTEM_TRUSTED_KEYS=""
+# CONFIG_SYSV68_PARTITION is not set
+CONFIG_SYSVIPC=y
+CONFIG_SYSVIPC_SYSCTL=y
+# CONFIG_SYSV_FS is not set
+# CONFIG_SYS_HYPERVISOR is not set
+# CONFIG_T5403 is not set
+# CONFIG_TARGET_CORE is not set
+# CONFIG_TASKSTATS is not set
+# CONFIG_TASKS_RCU is not set
+# CONFIG_TASK_XACCT is not set
+# CONFIG_TC35815 is not set
+# CONFIG_TCG_ATMEL is not set
+# CONFIG_TCG_CRB is not set
+# CONFIG_TCG_INFINEON is not set
+# CONFIG_TCG_NSC is not set
+# CONFIG_TCG_ST33_I2C is not set
+# CONFIG_TCG_TIS is not set
+# CONFIG_TCG_TIS_I2C_ATMEL is not set
+# CONFIG_TCG_TIS_I2C_INFINEON is not set
+# CONFIG_TCG_TIS_I2C_NUVOTON is not set
+# CONFIG_TCG_TIS_SPI is not set
+# CONFIG_TCG_TIS_ST33ZP24_I2C is not set
+# CONFIG_TCG_TIS_ST33ZP24_SPI is not set
+# CONFIG_TCG_TPM is not set
+# CONFIG_TCG_VTPM_PROXY is not set
+# CONFIG_TCG_XEN is not set
+# CONFIG_TCIC is not set
+CONFIG_TCP_CONG_ADVANCED=y
+# CONFIG_TCP_CONG_BBR is not set
+# CONFIG_TCP_CONG_BIC is not set
+# CONFIG_TCP_CONG_CDG is not set
+CONFIG_TCP_CONG_CUBIC=y
+# CONFIG_TCP_CONG_DCTCP is not set
+# CONFIG_TCP_CONG_HSTCP is not set
+# CONFIG_TCP_CONG_HTCP is not set
+# CONFIG_TCP_CONG_HYBLA is not set
+# CONFIG_TCP_CONG_ILLINOIS is not set
+# CONFIG_TCP_CONG_LP is not set
+# CONFIG_TCP_CONG_NV is not set
+# CONFIG_TCP_CONG_SCALABLE is not set
+# CONFIG_TCP_CONG_VEGAS is not set
+# CONFIG_TCP_CONG_VENO is not set
+# CONFIG_TCP_CONG_WESTWOOD is not set
+# CONFIG_TCP_CONG_YEAH is not set
+# CONFIG_TCP_MD5SIG is not set
+# CONFIG_TCS3414 is not set
+# CONFIG_TCS3472 is not set
+# CONFIG_TEE is not set
+# CONFIG_TEGRA_AHB is not set
+# CONFIG_TEGRA_HOST1X is not set
+# CONFIG_TEHUTI is not set
+# CONFIG_TERANETICS_PHY is not set
+# CONFIG_TEST_ASYNC_DRIVER_PROBE is not set
+# CONFIG_TEST_BITFIELD is not set
+# CONFIG_TEST_BITMAP is not set
+# CONFIG_TEST_BPF is not set
+# CONFIG_TEST_FIRMWARE is not set
+# CONFIG_TEST_HASH is not set
+# CONFIG_TEST_HEXDUMP is not set
+# CONFIG_TEST_IDA is not set
+# CONFIG_TEST_KMOD is not set
+# CONFIG_TEST_KSTRTOX is not set
+# CONFIG_TEST_LIST_SORT is not set
+# CONFIG_TEST_LKM is not set
+# CONFIG_TEST_OVERFLOW is not set
+# CONFIG_TEST_POWER is not set
+# CONFIG_TEST_PRINTF is not set
+# CONFIG_TEST_RHASHTABLE is not set
+# CONFIG_TEST_SORT is not set
+# CONFIG_TEST_STATIC_KEYS is not set
+# CONFIG_TEST_STRING_HELPERS is not set
+# CONFIG_TEST_SYSCTL is not set
+# CONFIG_TEST_UDELAY is not set
+# CONFIG_TEST_USER_COPY is not set
+# CONFIG_TEST_UUID is not set
+CONFIG_TEXTSEARCH=y
+# CONFIG_TEXTSEARCH_BM is not set
+# CONFIG_TEXTSEARCH_FSM is not set
+# CONFIG_TEXTSEARCH_KMP is not set
+# CONFIG_THERMAL is not set
+# CONFIG_THERMAL_DEFAULT_GOV_FAIR_SHARE is not set
+# CONFIG_THERMAL_DEFAULT_GOV_POWER_ALLOCATOR is not set
+# CONFIG_THERMAL_DEFAULT_GOV_USER_SPACE is not set
+# CONFIG_THERMAL_EMULATION is not set
+# CONFIG_THERMAL_GOV_BANG_BANG is not set
+# CONFIG_THERMAL_GOV_FAIR_SHARE is not set
+# CONFIG_THERMAL_GOV_POWER_ALLOCATOR is not set
+# CONFIG_THERMAL_GOV_USER_SPACE is not set
+# CONFIG_THERMAL_HWMON is not set
+# CONFIG_THERMAL_STATISTICS is not set
+# CONFIG_THERMAL_WRITABLE_TRIPS is not set
+# CONFIG_THINKPAD_ACPI is not set
+CONFIG_THIN_ARCHIVES=y
+# CONFIG_THRUSTMASTER_FF is not set
+# CONFIG_THUNDERBOLT is not set
+# CONFIG_THUNDER_NIC_BGX is not set
+# CONFIG_THUNDER_NIC_PF is not set
+# CONFIG_THUNDER_NIC_RGX is not set
+# CONFIG_THUNDER_NIC_VF is not set
+# CONFIG_TICK_CPU_ACCOUNTING is not set
+CONFIG_TICK_ONESHOT=y
+# CONFIG_TIFM_CORE is not set
+# CONFIG_TIGON3 is not set
+# CONFIG_TIMB_DMA is not set
+CONFIG_TIMERFD=y
+# CONFIG_TIMER_STATS is not set
+CONFIG_TINY_RCU=y
+# CONFIG_TIPC is not set
+# CONFIG_TI_ADC081C is not set
+# CONFIG_TI_ADC0832 is not set
+# CONFIG_TI_ADC084S021 is not set
+# CONFIG_TI_ADC108S102 is not set
+# CONFIG_TI_ADC12138 is not set
+# CONFIG_TI_ADC128S052 is not set
+# CONFIG_TI_ADC161S626 is not set
+# CONFIG_TI_ADS1015 is not set
+# CONFIG_TI_ADS7950 is not set
+# CONFIG_TI_ADS8688 is not set
+# CONFIG_TI_AM335X_ADC is not set
+# CONFIG_TI_CPSW is not set
+# CONFIG_TI_CPSW_ALE is not set
+# CONFIG_TI_CPTS is not set
+# CONFIG_TI_DAC082S085 is not set
+# CONFIG_TI_DAC5571 is not set
+# CONFIG_TI_DAC7512 is not set
+# CONFIG_TI_DAVINCI_CPDMA is not set
+# CONFIG_TI_DAVINCI_MDIO is not set
+# CONFIG_TI_ST is not set
+# CONFIG_TI_SYSCON_RESET is not set
+# CONFIG_TI_TLC4541 is not set
+# CONFIG_TLAN is not set
+# CONFIG_TLS is not set
+# CONFIG_TMD_HERMES is not set
+# CONFIG_TMP006 is not set
+# CONFIG_TMP007 is not set
+CONFIG_TMPFS=y
+# CONFIG_TMPFS_POSIX_ACL is not set
+CONFIG_TMPFS_XATTR=y
+# CONFIG_TOPSTAR_LAPTOP is not set
+# CONFIG_TORTURE_TEST is not set
+# CONFIG_TOSHIBA_HAPS is not set
+# CONFIG_TOUCHSCREEN_88PM860X is not set
+# CONFIG_TOUCHSCREEN_AD7877 is not set
+# CONFIG_TOUCHSCREEN_AD7879 is not set
+# CONFIG_TOUCHSCREEN_AD7879_I2C is not set
+# CONFIG_TOUCHSCREEN_AD7879_SPI is not set
+# CONFIG_TOUCHSCREEN_ADC is not set
+# CONFIG_TOUCHSCREEN_ADS7846 is not set
+# CONFIG_TOUCHSCREEN_AR1021_I2C is not set
+# CONFIG_TOUCHSCREEN_ATMEL_MXT is not set
+# CONFIG_TOUCHSCREEN_ATMEL_MXT_T37 is not set
+# CONFIG_TOUCHSCREEN_AUO_PIXCIR is not set
+# CONFIG_TOUCHSCREEN_BU21013 is not set
+# CONFIG_TOUCHSCREEN_BU21029 is not set
+# CONFIG_TOUCHSCREEN_CHIPONE_ICN8318 is not set
+# CONFIG_TOUCHSCREEN_CHIPONE_ICN8505 is not set
+# CONFIG_TOUCHSCREEN_COLIBRI_VF50 is not set
+# CONFIG_TOUCHSCREEN_CY8CTMG110 is not set
+# CONFIG_TOUCHSCREEN_CYTTSP4_CORE is not set
+# CONFIG_TOUCHSCREEN_CYTTSP4_I2C is not set
+# CONFIG_TOUCHSCREEN_CYTTSP4_SPI is not set
+# CONFIG_TOUCHSCREEN_CYTTSP_CORE is not set
+# CONFIG_TOUCHSCREEN_CYTTSP_I2C is not set
+# CONFIG_TOUCHSCREEN_CYTTSP_SPI is not set
+# CONFIG_TOUCHSCREEN_DA9034 is not set
+# CONFIG_TOUCHSCREEN_DA9052 is not set
+# CONFIG_TOUCHSCREEN_DYNAPRO is not set
+# CONFIG_TOUCHSCREEN_EDT_FT5X06 is not set
+# CONFIG_TOUCHSCREEN_EETI is not set
+# CONFIG_TOUCHSCREEN_EGALAX is not set
+# CONFIG_TOUCHSCREEN_EGALAX_SERIAL is not set
+# CONFIG_TOUCHSCREEN_EKTF2127 is not set
+# CONFIG_TOUCHSCREEN_ELAN is not set
+# CONFIG_TOUCHSCREEN_ELO is not set
+# CONFIG_TOUCHSCREEN_EXC3000 is not set
+# CONFIG_TOUCHSCREEN_FUJITSU is not set
+# CONFIG_TOUCHSCREEN_GOODIX is not set
+# CONFIG_TOUCHSCREEN_GUNZE is not set
+# CONFIG_TOUCHSCREEN_HAMPSHIRE is not set
+# CONFIG_TOUCHSCREEN_HIDEEP is not set
+# CONFIG_TOUCHSCREEN_HP600 is not set
+# CONFIG_TOUCHSCREEN_HP7XX is not set
+# CONFIG_TOUCHSCREEN_HTCPEN is not set
+# CONFIG_TOUCHSCREEN_ILI210X is not set
+# CONFIG_TOUCHSCREEN_IMX6UL_TSC is not set
+# CONFIG_TOUCHSCREEN_INEXIO is not set
+# CONFIG_TOUCHSCREEN_IPAQ_MICRO is not set
+# CONFIG_TOUCHSCREEN_IPROC is not set
+# CONFIG_TOUCHSCREEN_LPC32XX is not set
+# CONFIG_TOUCHSCREEN_MAX11801 is not set
+# CONFIG_TOUCHSCREEN_MC13783 is not set
+# CONFIG_TOUCHSCREEN_MCS5000 is not set
+# CONFIG_TOUCHSCREEN_MELFAS_MIP4 is not set
+# CONFIG_TOUCHSCREEN_MIGOR is not set
+# CONFIG_TOUCHSCREEN_MK712 is not set
+# CONFIG_TOUCHSCREEN_MMS114 is not set
+# CONFIG_TOUCHSCREEN_MTOUCH is not set
+# CONFIG_TOUCHSCREEN_MX25 is not set
+# CONFIG_TOUCHSCREEN_MXS_LRADC is not set
+# CONFIG_TOUCHSCREEN_PCAP is not set
+# CONFIG_TOUCHSCREEN_PENMOUNT is not set
+# CONFIG_TOUCHSCREEN_PIXCIR is not set
+# CONFIG_TOUCHSCREEN_PROPERTIES is not set
+# CONFIG_TOUCHSCREEN_RM_TS is not set
+# CONFIG_TOUCHSCREEN_ROHM_BU21023 is not set
+# CONFIG_TOUCHSCREEN_RPI_FT5406 is not set
+# CONFIG_TOUCHSCREEN_S3C2410 is not set
+# CONFIG_TOUCHSCREEN_S6SY761 is not set
+# CONFIG_TOUCHSCREEN_SILEAD is not set
+# CONFIG_TOUCHSCREEN_SIS_I2C is not set
+# CONFIG_TOUCHSCREEN_ST1232 is not set
+# CONFIG_TOUCHSCREEN_STMFTS is not set
+# CONFIG_TOUCHSCREEN_STMPE is not set
+# CONFIG_TOUCHSCREEN_SUN4I is not set
+# CONFIG_TOUCHSCREEN_SUR40 is not set
+# CONFIG_TOUCHSCREEN_SURFACE3_SPI is not set
+# CONFIG_TOUCHSCREEN_SX8654 is not set
+# CONFIG_TOUCHSCREEN_TI_AM335X_TSC is not set
+# CONFIG_TOUCHSCREEN_TOUCHIT213 is not set
+# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set
+# CONFIG_TOUCHSCREEN_TOUCHWIN is not set
+# CONFIG_TOUCHSCREEN_TPS6507X is not set
+# CONFIG_TOUCHSCREEN_TS4800 is not set
+# CONFIG_TOUCHSCREEN_TSC2004 is not set
+# CONFIG_TOUCHSCREEN_TSC2005 is not set
+# CONFIG_TOUCHSCREEN_TSC2007 is not set
+# CONFIG_TOUCHSCREEN_TSC2007_IIO is not set
+# CONFIG_TOUCHSCREEN_TSC200X_CORE is not set
+# CONFIG_TOUCHSCREEN_TSC_SERIO is not set
+# CONFIG_TOUCHSCREEN_UCB1400 is not set
+# CONFIG_TOUCHSCREEN_USB_3M is not set
+# CONFIG_TOUCHSCREEN_USB_COMPOSITE is not set
+# CONFIG_TOUCHSCREEN_USB_DMC_TSC10 is not set
+# CONFIG_TOUCHSCREEN_USB_E2I is not set
+# CONFIG_TOUCHSCREEN_USB_EASYTOUCH is not set
+# CONFIG_TOUCHSCREEN_USB_EGALAX is not set
+# CONFIG_TOUCHSCREEN_USB_ELO is not set
+# CONFIG_TOUCHSCREEN_USB_ETT_TC45USB is not set
+# CONFIG_TOUCHSCREEN_USB_ETURBO is not set
+# CONFIG_TOUCHSCREEN_USB_GENERAL_TOUCH is not set
+# CONFIG_TOUCHSCREEN_USB_GOTOP is not set
+# CONFIG_TOUCHSCREEN_USB_GUNZE is not set
+# CONFIG_TOUCHSCREEN_USB_IDEALTEK is not set
+# CONFIG_TOUCHSCREEN_USB_IRTOUCH is not set
+# CONFIG_TOUCHSCREEN_USB_ITM is not set
+# CONFIG_TOUCHSCREEN_USB_JASTEC is not set
+# CONFIG_TOUCHSCREEN_USB_NEXIO is not set
+# CONFIG_TOUCHSCREEN_USB_PANJIT is not set
+# CONFIG_TOUCHSCREEN_USB_ZYTRONIC is not set
+# CONFIG_TOUCHSCREEN_W90X900 is not set
+# CONFIG_TOUCHSCREEN_WACOM_I2C is not set
+# CONFIG_TOUCHSCREEN_WACOM_W8001 is not set
+# CONFIG_TOUCHSCREEN_WDT87XX_I2C is not set
+# CONFIG_TOUCHSCREEN_WM831X is not set
+# CONFIG_TOUCHSCREEN_WM9705 is not set
+# CONFIG_TOUCHSCREEN_WM9712 is not set
+# CONFIG_TOUCHSCREEN_WM9713 is not set
+# CONFIG_TOUCHSCREEN_WM97XX is not set
+# CONFIG_TOUCHSCREEN_WM97XX_MAINSTONE is not set
+# CONFIG_TOUCHSCREEN_WM97XX_ZYLONITE is not set
+# CONFIG_TOUCHSCREEN_ZET6223 is not set
+# CONFIG_TOUCHSCREEN_ZFORCE is not set
+# CONFIG_TPL0102 is not set
+# CONFIG_TPS6105X is not set
+# CONFIG_TPS65010 is not set
+# CONFIG_TPS6507X is not set
+# CONFIG_TRACEPOINT_BENCHMARK is not set
+# CONFIG_TRACER_SNAPSHOT is not set
+# CONFIG_TRACER_SNAPSHOT_PER_CPU_SWAP is not set
+# CONFIG_TRACE_BRANCH_PROFILING is not set
+# CONFIG_TRACE_EVAL_MAP_FILE is not set
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
+# CONFIG_TRACE_SINK is not set
+# CONFIG_TRACING_EVENTS_GPIO is not set
+CONFIG_TRACING_SUPPORT=y
+CONFIG_TRAD_SIGNALS=y
+# CONFIG_TRANSPARENT_HUGEPAGE is not set
+# CONFIG_TREE_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_TRIM_UNUSED_KSYMS is not set
+# CONFIG_TRUSTED_KEYS is not set
+# CONFIG_TSL2583 is not set
+# CONFIG_TSL2772 is not set
+# CONFIG_TSL2x7x is not set
+# CONFIG_TSL4531 is not set
+# CONFIG_TSYS01 is not set
+# CONFIG_TSYS02D is not set
+# CONFIG_TTPCI_EEPROM is not set
+CONFIG_TTY=y
+# CONFIG_TTY_PRINTK is not set
+# CONFIG_TUN is not set
+# CONFIG_TUN_VNET_CROSS_LE is not set
+# CONFIG_TWL4030_CORE is not set
+# CONFIG_TWL4030_MADC is not set
+# CONFIG_TWL6030_GPADC is not set
+# CONFIG_TWL6040_CORE is not set
+# CONFIG_TYPEC is not set
+# CONFIG_TYPEC_TCPM is not set
+# CONFIG_TYPEC_UCSI is not set
+# CONFIG_TYPHOON is not set
+# CONFIG_UACCESS_WITH_MEMCPY is not set
+# CONFIG_UBIFS_ATIME_SUPPORT is not set
+# CONFIG_UBIFS_FS_ENCRYPTION is not set
+CONFIG_UBIFS_FS_FORMAT4=y
+# CONFIG_UBIFS_FS_SECURITY is not set
+# CONFIG_UBIFS_FS_XATTR is not set
+# CONFIG_UBSAN is not set
+# CONFIG_UCB1400_CORE is not set
+# CONFIG_UCSI is not set
+# CONFIG_UDF_FS is not set
+CONFIG_UEVENT_HELPER=y
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+# CONFIG_UFS_FS is not set
+# CONFIG_UHID is not set
+CONFIG_UID16=y
+# CONFIG_UIO is not set
+# CONFIG_ULTRA is not set
+# CONFIG_ULTRIX_PARTITION is not set
+# CONFIG_UNISYSSPAR is not set
+# CONFIG_UNISYS_VISORBUS is not set
+CONFIG_UNIX=y
+CONFIG_UNIX98_PTYS=y
+# CONFIG_UNIXWARE_DISKLABEL is not set
+# CONFIG_UNIX_DIAG is not set
+# CONFIG_UNUSED_SYMBOLS is not set
+# CONFIG_UPROBES is not set
+# CONFIG_UPROBE_EVENTS is not set
+# CONFIG_US5182D is not set
+# CONFIG_USB is not set
+# CONFIG_USBIP_CORE is not set
+CONFIG_USBIP_VHCI_HC_PORTS=8
+CONFIG_USBIP_VHCI_NR_HCS=1
+# CONFIG_USBIP_VUDC is not set
+# CONFIG_USBPCWATCHDOG is not set
+# CONFIG_USB_ACM is not set
+# CONFIG_USB_ADUTUX is not set
+CONFIG_USB_ALI_M5632=y
+# CONFIG_USB_AMD5536UDC is not set
+CONFIG_USB_AN2720=y
+# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set
+# CONFIG_USB_APPLEDISPLAY is not set
+CONFIG_USB_ARCH_HAS_HCD=y
+CONFIG_USB_ARMLINUX=y
+# CONFIG_USB_ATM is not set
+# CONFIG_USB_BDC_UDC is not set
+CONFIG_USB_BELKIN=y
+# CONFIG_USB_C67X00_HCD is not set
+# CONFIG_USB_CATC is not set
+# CONFIG_USB_CDC_COMPOSITE is not set
+# CONFIG_USB_CHAOSKEY is not set
+# CONFIG_USB_CHIPIDEA is not set
+# CONFIG_USB_CONFIGFS is not set
+# CONFIG_USB_CXACRU is not set
+# CONFIG_USB_CYPRESS_CY7C63 is not set
+# CONFIG_USB_CYTHERM is not set
+CONFIG_USB_DEFAULT_PERSIST=y
+# CONFIG_USB_DSBR is not set
+# CONFIG_USB_DUMMY_HCD is not set
+# CONFIG_USB_DWC2 is not set
+# CONFIG_USB_DWC2_DEBUG is not set
+# CONFIG_USB_DWC2_DUAL_ROLE is not set
+# CONFIG_USB_DWC2_HOST is not set
+# CONFIG_USB_DWC2_PERIPHERAL is not set
+# CONFIG_USB_DWC3 is not set
+# CONFIG_USB_DWC3_EXYNOS is not set
+# CONFIG_USB_DWC3_HAPS is not set
+# CONFIG_USB_DWC3_KEYSTONE is not set
+# CONFIG_USB_DWC3_OF_SIMPLE is not set
+# CONFIG_USB_DWC3_PCI is not set
+# CONFIG_USB_DWC3_QCOM is not set
+# CONFIG_USB_DWC3_ULPI is not set
+# CONFIG_USB_DYNAMIC_MINORS is not set
+# CONFIG_USB_EG20T is not set
+# CONFIG_USB_EHCI_ATH79 is not set
+# CONFIG_USB_EHCI_HCD_AT91 is not set
+# CONFIG_USB_EHCI_HCD_OMAP is not set
+# CONFIG_USB_EHCI_HCD_PPC_OF is not set
+# CONFIG_USB_EHCI_MSM is not set
+# CONFIG_USB_EHCI_MV is not set
+CONFIG_USB_EHCI_ROOT_HUB_TT=y
+CONFIG_USB_EHCI_TT_NEWSCHED=y
+# CONFIG_USB_EHSET_TEST_FIXTURE is not set
+# CONFIG_USB_EMI26 is not set
+# CONFIG_USB_EMI62 is not set
+# CONFIG_USB_EPSON2888 is not set
+# CONFIG_USB_EZUSB_FX2 is not set
+# CONFIG_USB_FOTG210_HCD is not set
+# CONFIG_USB_FOTG210_UDC is not set
+# CONFIG_USB_FSL_USB2 is not set
+# CONFIG_USB_FTDI_ELAN is not set
+# CONFIG_USB_FUNCTIONFS is not set
+# CONFIG_USB_FUSB300 is not set
+# CONFIG_USB_GADGET is not set
+# CONFIG_USB_GADGETFS is not set
+# CONFIG_USB_GADGET_DEBUG is not set
+# CONFIG_USB_GADGET_DEBUG_FILES is not set
+# CONFIG_USB_GADGET_DEBUG_FS is not set
+CONFIG_USB_GADGET_STORAGE_NUM_BUFFERS=2
+CONFIG_USB_GADGET_VBUS_DRAW=2
+# CONFIG_USB_GADGET_XILINX is not set
+# CONFIG_USB_GL860 is not set
+# CONFIG_USB_GOKU is not set
+# CONFIG_USB_GPIO_VBUS is not set
+# CONFIG_USB_GR_UDC is not set
+# CONFIG_USB_GSPCA is not set
+# CONFIG_USB_GSPCA_BENQ is not set
+# CONFIG_USB_GSPCA_CONEX is not set
+# CONFIG_USB_GSPCA_CPIA1 is not set
+# CONFIG_USB_GSPCA_DTCS033 is not set
+# CONFIG_USB_GSPCA_ETOMS is not set
+# CONFIG_USB_GSPCA_FINEPIX is not set
+# CONFIG_USB_GSPCA_JEILINJ is not set
+# CONFIG_USB_GSPCA_JL2005BCD is not set
+# CONFIG_USB_GSPCA_KINECT is not set
+# CONFIG_USB_GSPCA_KONICA is not set
+# CONFIG_USB_GSPCA_MARS is not set
+# CONFIG_USB_GSPCA_MR97310A is not set
+# CONFIG_USB_GSPCA_NW80X is not set
+# CONFIG_USB_GSPCA_OV519 is not set
+# CONFIG_USB_GSPCA_OV534 is not set
+# CONFIG_USB_GSPCA_OV534_9 is not set
+# CONFIG_USB_GSPCA_PAC207 is not set
+# CONFIG_USB_GSPCA_PAC7302 is not set
+# CONFIG_USB_GSPCA_PAC7311 is not set
+# CONFIG_USB_GSPCA_SE401 is not set
+# CONFIG_USB_GSPCA_SN9C2028 is not set
+# CONFIG_USB_GSPCA_SN9C20X is not set
+# CONFIG_USB_GSPCA_SONIXB is not set
+# CONFIG_USB_GSPCA_SONIXJ is not set
+# CONFIG_USB_GSPCA_SPCA1528 is not set
+# CONFIG_USB_GSPCA_SPCA500 is not set
+# CONFIG_USB_GSPCA_SPCA501 is not set
+# CONFIG_USB_GSPCA_SPCA505 is not set
+# CONFIG_USB_GSPCA_SPCA506 is not set
+# CONFIG_USB_GSPCA_SPCA508 is not set
+# CONFIG_USB_GSPCA_SPCA561 is not set
+# CONFIG_USB_GSPCA_SQ905 is not set
+# CONFIG_USB_GSPCA_SQ905C is not set
+# CONFIG_USB_GSPCA_SQ930X is not set
+# CONFIG_USB_GSPCA_STK014 is not set
+# CONFIG_USB_GSPCA_STK1135 is not set
+# CONFIG_USB_GSPCA_STV0680 is not set
+# CONFIG_USB_GSPCA_SUNPLUS is not set
+# CONFIG_USB_GSPCA_T613 is not set
+# CONFIG_USB_GSPCA_TOPRO is not set
+# CONFIG_USB_GSPCA_TOUPTEK is not set
+# CONFIG_USB_GSPCA_TV8532 is not set
+# CONFIG_USB_GSPCA_VC032X is not set
+# CONFIG_USB_GSPCA_VICAM is not set
+# CONFIG_USB_GSPCA_XIRLINK_CIT is not set
+# CONFIG_USB_GSPCA_ZC3XX is not set
+# CONFIG_USB_G_ACM_MS is not set
+# CONFIG_USB_G_DBGP is not set
+# CONFIG_USB_G_HID is not set
+# CONFIG_USB_G_MULTI is not set
+# CONFIG_USB_G_NCM is not set
+# CONFIG_USB_G_NOKIA is not set
+# CONFIG_USB_G_PRINTER is not set
+# CONFIG_USB_G_SERIAL is not set
+# CONFIG_USB_G_WEBCAM is not set
+# CONFIG_USB_HCD_TEST_MODE is not set
+# CONFIG_USB_HID is not set
+# CONFIG_USB_HIDDEV is not set
+# CONFIG_USB_HSIC_USB3503 is not set
+# CONFIG_USB_HSIC_USB4604 is not set
+# CONFIG_USB_HSO is not set
+# CONFIG_USB_HUB_USB251XB is not set
+# CONFIG_USB_HWA_HCD is not set
+# CONFIG_USB_IDMOUSE is not set
+# CONFIG_USB_IMX21_HCD is not set
+# CONFIG_USB_IOWARRIOR is not set
+# CONFIG_USB_IPHETH is not set
+# CONFIG_USB_ISIGHTFW is not set
+# CONFIG_USB_ISP116X_HCD is not set
+# CONFIG_USB_ISP1301 is not set
+# CONFIG_USB_ISP1362_HCD is not set
+# CONFIG_USB_ISP1760 is not set
+# CONFIG_USB_ISP1760_HCD is not set
+# CONFIG_USB_KAWETH is not set
+# CONFIG_USB_KBD is not set
+# CONFIG_USB_KC2190 is not set
+# CONFIG_USB_LAN78XX is not set
+# CONFIG_USB_LCD is not set
+# CONFIG_USB_LD is not set
+# CONFIG_USB_LED is not set
+# CONFIG_USB_LEDS_TRIGGER_USBPORT is not set
+# CONFIG_USB_LED_TRIG is not set
+# CONFIG_USB_LEGOTOWER is not set
+# CONFIG_USB_LINK_LAYER_TEST is not set
+# CONFIG_USB_M5602 is not set
+# CONFIG_USB_M66592 is not set
+# CONFIG_USB_MASS_STORAGE is not set
+# CONFIG_USB_MAX3421_HCD is not set
+# CONFIG_USB_MDC800 is not set
+# CONFIG_USB_MICROTEK is not set
+# CONFIG_USB_MIDI_GADGET is not set
+# CONFIG_USB_MON is not set
+# CONFIG_USB_MOUSE is not set
+# CONFIG_USB_MSM_OTG is not set
+# CONFIG_USB_MTU3 is not set
+# CONFIG_USB_MUSB_HDRC is not set
+# CONFIG_USB_MV_U3D is not set
+# CONFIG_USB_MV_UDC is not set
+# CONFIG_USB_MXS_PHY is not set
+# CONFIG_USB_NET2272 is not set
+# CONFIG_USB_NET2280 is not set
+# CONFIG_USB_NET_AX88179_178A is not set
+# CONFIG_USB_NET_AX8817X is not set
+# CONFIG_USB_NET_CDCETHER is not set
+# CONFIG_USB_NET_CDC_EEM is not set
+# CONFIG_USB_NET_CDC_MBIM is not set
+# CONFIG_USB_NET_CDC_NCM is not set
+# CONFIG_USB_NET_CDC_SUBSET is not set
+# CONFIG_USB_NET_CH9200 is not set
+# CONFIG_USB_NET_CX82310_ETH is not set
+# CONFIG_USB_NET_DM9601 is not set
+# CONFIG_USB_NET_DRIVERS is not set
+# CONFIG_USB_NET_GL620A is not set
+# CONFIG_USB_NET_HUAWEI_CDC_NCM is not set
+# CONFIG_USB_NET_INT51X1 is not set
+# CONFIG_USB_NET_KALMIA is not set
+# CONFIG_USB_NET_MCS7830 is not set
+# CONFIG_USB_NET_NET1080 is not set
+# CONFIG_USB_NET_PLUSB is not set
+# CONFIG_USB_NET_QMI_WWAN is not set
+# CONFIG_USB_NET_RNDIS_HOST is not set
+# CONFIG_USB_NET_RNDIS_WLAN is not set
+# CONFIG_USB_NET_SMSC75XX is not set
+# CONFIG_USB_NET_SMSC95XX is not set
+# CONFIG_USB_NET_SR9700 is not set
+# CONFIG_USB_NET_SR9800 is not set
+# CONFIG_USB_NET_ZAURUS is not set
+# CONFIG_USB_OHCI_HCD is not set
+# CONFIG_USB_OHCI_HCD_PCI is not set
+# CONFIG_USB_OHCI_HCD_PPC_OF is not set
+# CONFIG_USB_OHCI_HCD_PPC_OF_BE is not set
+# CONFIG_USB_OHCI_HCD_PPC_OF_LE is not set
+# CONFIG_USB_OHCI_HCD_SSB is not set
+CONFIG_USB_OHCI_LITTLE_ENDIAN=y
+# CONFIG_USB_OTG is not set
+# CONFIG_USB_OTG_BLACKLIST_HUB is not set
+# CONFIG_USB_OTG_FSM is not set
+# CONFIG_USB_OTG_WHITELIST is not set
+# CONFIG_USB_OXU210HP_HCD is not set
+# CONFIG_USB_PCI is not set
+# CONFIG_USB_PEGASUS is not set
+# CONFIG_USB_PHY is not set
+# CONFIG_USB_PRINTER is not set
+# CONFIG_USB_PWC_INPUT_EVDEV is not set
+# CONFIG_USB_PXA27X is not set
+# CONFIG_USB_R8A66597 is not set
+# CONFIG_USB_R8A66597_HCD is not set
+# CONFIG_USB_RCAR_PHY is not set
+# CONFIG_USB_RENESAS_USBHS is not set
+# CONFIG_USB_RIO500 is not set
+# CONFIG_USB_ROLE_SWITCH is not set
+# CONFIG_USB_RTL8150 is not set
+# CONFIG_USB_RTL8152 is not set
+# CONFIG_USB_S2255 is not set
+# CONFIG_USB_SERIAL is not set
+# CONFIG_USB_SERIAL_AIRCABLE is not set
+# CONFIG_USB_SERIAL_ARK3116 is not set
+# CONFIG_USB_SERIAL_BELKIN is not set
+# CONFIG_USB_SERIAL_CH341 is not set
+# CONFIG_USB_SERIAL_CP210X is not set
+# CONFIG_USB_SERIAL_CYBERJACK is not set
+# CONFIG_USB_SERIAL_CYPRESS_M8 is not set
+# CONFIG_USB_SERIAL_DEBUG is not set
+# CONFIG_USB_SERIAL_DIGI_ACCELEPORT is not set
+# CONFIG_USB_SERIAL_EDGEPORT is not set
+# CONFIG_USB_SERIAL_EDGEPORT_TI is not set
+# CONFIG_USB_SERIAL_EMPEG is not set
+# CONFIG_USB_SERIAL_F81232 is not set
+# CONFIG_USB_SERIAL_F8153X is not set
+# CONFIG_USB_SERIAL_FTDI_SIO is not set
+# CONFIG_USB_SERIAL_GARMIN is not set
+CONFIG_USB_SERIAL_GENERIC=y
+# CONFIG_USB_SERIAL_IPAQ is not set
+# CONFIG_USB_SERIAL_IPW is not set
+# CONFIG_USB_SERIAL_IR is not set
+# CONFIG_USB_SERIAL_IUU is not set
+# CONFIG_USB_SERIAL_KEYSPAN is not set
+CONFIG_USB_SERIAL_KEYSPAN_MPR=y
+# CONFIG_USB_SERIAL_KEYSPAN_PDA is not set
+CONFIG_USB_SERIAL_KEYSPAN_USA18X=y
+CONFIG_USB_SERIAL_KEYSPAN_USA19=y
+CONFIG_USB_SERIAL_KEYSPAN_USA19QI=y
+CONFIG_USB_SERIAL_KEYSPAN_USA19QW=y
+CONFIG_USB_SERIAL_KEYSPAN_USA19W=y
+CONFIG_USB_SERIAL_KEYSPAN_USA28=y
+CONFIG_USB_SERIAL_KEYSPAN_USA28X=y
+CONFIG_USB_SERIAL_KEYSPAN_USA28XA=y
+CONFIG_USB_SERIAL_KEYSPAN_USA28XB=y
+CONFIG_USB_SERIAL_KEYSPAN_USA49W=y
+CONFIG_USB_SERIAL_KEYSPAN_USA49WLC=y
+# CONFIG_USB_SERIAL_KLSI is not set
+# CONFIG_USB_SERIAL_KOBIL_SCT is not set
+# CONFIG_USB_SERIAL_MCT_U232 is not set
+# CONFIG_USB_SERIAL_METRO is not set
+# CONFIG_USB_SERIAL_MOS7715_PARPORT is not set
+# CONFIG_USB_SERIAL_MOS7720 is not set
+# CONFIG_USB_SERIAL_MOS7840 is not set
+# CONFIG_USB_SERIAL_MXUPORT is not set
+# CONFIG_USB_SERIAL_NAVMAN is not set
+# CONFIG_USB_SERIAL_OMNINET is not set
+# CONFIG_USB_SERIAL_OPTICON is not set
+# CONFIG_USB_SERIAL_OPTION is not set
+# CONFIG_USB_SERIAL_OTI6858 is not set
+# CONFIG_USB_SERIAL_PL2303 is not set
+# CONFIG_USB_SERIAL_QCAUX is not set
+# CONFIG_USB_SERIAL_QT2 is not set
+# CONFIG_USB_SERIAL_QUALCOMM is not set
+# CONFIG_USB_SERIAL_SAFE is not set
+CONFIG_USB_SERIAL_SAFE_PADDED=y
+# CONFIG_USB_SERIAL_SIERRAWIRELESS is not set
+# CONFIG_USB_SERIAL_SIMPLE is not set
+# CONFIG_USB_SERIAL_SPCP8X5 is not set
+# CONFIG_USB_SERIAL_SSU100 is not set
+# CONFIG_USB_SERIAL_SYMBOL is not set
+# CONFIG_USB_SERIAL_TI is not set
+# CONFIG_USB_SERIAL_UPD78F0730 is not set
+# CONFIG_USB_SERIAL_VISOR is not set
+# CONFIG_USB_SERIAL_WHITEHEAT is not set
+# CONFIG_USB_SERIAL_WISHBONE is not set
+# CONFIG_USB_SERIAL_XIRCOM is not set
+# CONFIG_USB_SERIAL_XSENS_MT is not set
+# CONFIG_USB_SEVSEG is not set
+# CONFIG_USB_SIERRA_NET is not set
+# CONFIG_USB_SISUSBVGA is not set
+# CONFIG_USB_SL811_HCD is not set
+# CONFIG_USB_SNP_UDC_PLAT is not set
+# CONFIG_USB_SPEEDTOUCH is not set
+# CONFIG_USB_STKWEBCAM is not set
+# CONFIG_USB_STORAGE is not set
+# CONFIG_USB_STORAGE_ALAUDA is not set
+# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
+# CONFIG_USB_STORAGE_DATAFAB is not set
+# CONFIG_USB_STORAGE_DEBUG is not set
+# CONFIG_USB_STORAGE_ENE_UB6250 is not set
+# CONFIG_USB_STORAGE_FREECOM is not set
+# CONFIG_USB_STORAGE_ISD200 is not set
+# CONFIG_USB_STORAGE_JUMPSHOT is not set
+# CONFIG_USB_STORAGE_KARMA is not set
+# CONFIG_USB_STORAGE_ONETOUCH is not set
+# CONFIG_USB_STORAGE_REALTEK is not set
+# CONFIG_USB_STORAGE_SDDR09 is not set
+# CONFIG_USB_STORAGE_SDDR55 is not set
+# CONFIG_USB_STORAGE_USBAT is not set
+# CONFIG_USB_STV06XX is not set
+# CONFIG_USB_SUPPORT is not set
+# CONFIG_USB_SWITCH_FSA9480 is not set
+# CONFIG_USB_TEST is not set
+# CONFIG_USB_TMC is not set
+# CONFIG_USB_TRANCEVIBRATOR is not set
+# CONFIG_USB_UAS is not set
+# CONFIG_USB_UEAGLEATM is not set
+# CONFIG_USB_ULPI is not set
+# CONFIG_USB_ULPI_BUS is not set
+# CONFIG_USB_USBNET is not set
+# CONFIG_USB_USS720 is not set
+# CONFIG_USB_VIDEO_CLASS is not set
+CONFIG_USB_VIDEO_CLASS_INPUT_EVDEV=y
+# CONFIG_USB_VL600 is not set
+# CONFIG_USB_WDM is not set
+# CONFIG_USB_WHCI_HCD is not set
+# CONFIG_USB_WUSB is not set
+# CONFIG_USB_WUSB_CBAF is not set
+# CONFIG_USB_XHCI_DBGCAP is not set
+# CONFIG_USB_XHCI_HCD is not set
+# CONFIG_USB_XHCI_MVEBU is not set
+# CONFIG_USB_XUSBATM is not set
+# CONFIG_USB_YUREX is not set
+# CONFIG_USB_ZD1201 is not set
+# CONFIG_USB_ZERO is not set
+# CONFIG_USB_ZR364XX is not set
+# CONFIG_USELIB is not set
+# CONFIG_USERFAULTFD is not set
+# CONFIG_USE_OF is not set
+# CONFIG_UTS_NS is not set
+# CONFIG_UWB is not set
+# CONFIG_U_SERIAL_CONSOLE is not set
+# CONFIG_V4L_MEM2MEM_DRIVERS is not set
+# CONFIG_V4L_TEST_DRIVERS is not set
+# CONFIG_VBOXGUEST is not set
+# CONFIG_VCNL4000 is not set
+# CONFIG_VDSO is not set
+# CONFIG_VEML6070 is not set
+# CONFIG_VETH is not set
+# CONFIG_VEXPRESS_CONFIG is not set
+# CONFIG_VF610_ADC is not set
+# CONFIG_VF610_DAC is not set
+# CONFIG_VFAT_FS is not set
+# CONFIG_VGASTATE is not set
+# CONFIG_VGA_ARB is not set
+# CONFIG_VGA_SWITCHEROO is not set
+# CONFIG_VHOST_CROSS_ENDIAN_LEGACY is not set
+# CONFIG_VHOST_NET is not set
+# CONFIG_VHOST_VSOCK is not set
+# CONFIG_VIA_RHINE is not set
+# CONFIG_VIA_VELOCITY is not set
+# CONFIG_VIDEO_ADV7170 is not set
+# CONFIG_VIDEO_ADV7175 is not set
+# CONFIG_VIDEO_ADV7180 is not set
+# CONFIG_VIDEO_ADV7183 is not set
+# CONFIG_VIDEO_ADV7343 is not set
+# CONFIG_VIDEO_ADV7393 is not set
+# CONFIG_VIDEO_ADV_DEBUG is not set
+# CONFIG_VIDEO_AK881X is not set
+# CONFIG_VIDEO_BT819 is not set
+# CONFIG_VIDEO_BT848 is not set
+# CONFIG_VIDEO_BT856 is not set
+# CONFIG_VIDEO_BT866 is not set
+# CONFIG_VIDEO_CADENCE is not set
+# CONFIG_VIDEO_CAFE_CCIC is not set
+# CONFIG_VIDEO_CS3308 is not set
+# CONFIG_VIDEO_CS5345 is not set
+# CONFIG_VIDEO_CS53L32A is not set
+# CONFIG_VIDEO_CX231XX is not set
+# CONFIG_VIDEO_CX2341X is not set
+# CONFIG_VIDEO_CX25840 is not set
+# CONFIG_VIDEO_CX88 is not set
+# CONFIG_VIDEO_DEV is not set
+# CONFIG_VIDEO_DM6446_CCDC is not set
+# CONFIG_VIDEO_DT3155 is not set
+# CONFIG_VIDEO_EM28XX is not set
+# CONFIG_VIDEO_FIXED_MINOR_RANGES is not set
+# CONFIG_VIDEO_GO7007 is not set
+# CONFIG_VIDEO_HDPVR is not set
+# CONFIG_VIDEO_HEXIUM_GEMINI is not set
+# CONFIG_VIDEO_HEXIUM_ORION is not set
+# CONFIG_VIDEO_I2C is not set
+# CONFIG_VIDEO_IR_I2C is not set
+# CONFIG_VIDEO_IVTV is not set
+# CONFIG_VIDEO_KS0127 is not set
+# CONFIG_VIDEO_M52790 is not set
+# CONFIG_VIDEO_ML86V7667 is not set
+# CONFIG_VIDEO_MSP3400 is not set
+# CONFIG_VIDEO_MT9M111 is not set
+# CONFIG_VIDEO_MT9T112 is not set
+# CONFIG_VIDEO_MT9V011 is not set
+# CONFIG_VIDEO_MT9V111 is not set
+# CONFIG_VIDEO_MXB is not set
+# CONFIG_VIDEO_NOON010PC30 is not set
+# CONFIG_VIDEO_OMAP2_VOUT is not set
+# CONFIG_VIDEO_OV2640 is not set
+# CONFIG_VIDEO_OV2659 is not set
+# CONFIG_VIDEO_OV5695 is not set
+# CONFIG_VIDEO_OV6650 is not set
+# CONFIG_VIDEO_OV7640 is not set
+# CONFIG_VIDEO_OV7670 is not set
+# CONFIG_VIDEO_OV772X is not set
+# CONFIG_VIDEO_OV7740 is not set
+# CONFIG_VIDEO_PVRUSB2 is not set
+# CONFIG_VIDEO_RJ54N1 is not set
+# CONFIG_VIDEO_SAA6588 is not set
+# CONFIG_VIDEO_SAA6752HS is not set
+# CONFIG_VIDEO_SAA7110 is not set
+# CONFIG_VIDEO_SAA711X is not set
+# CONFIG_VIDEO_SAA7127 is not set
+# CONFIG_VIDEO_SAA7134 is not set
+# CONFIG_VIDEO_SAA717X is not set
+# CONFIG_VIDEO_SAA7185 is not set
+# CONFIG_VIDEO_SH_MOBILE_CEU is not set
+# CONFIG_VIDEO_SONY_BTF_MPX is not set
+# CONFIG_VIDEO_SR030PC30 is not set
+# CONFIG_VIDEO_TDA7432 is not set
+# CONFIG_VIDEO_TDA9840 is not set
+# CONFIG_VIDEO_TEA6415C is not set
+# CONFIG_VIDEO_TEA6420 is not set
+# CONFIG_VIDEO_THS7303 is not set
+# CONFIG_VIDEO_THS8200 is not set
+# CONFIG_VIDEO_TIMBERDALE is not set
+# CONFIG_VIDEO_TLV320AIC23B is not set
+# CONFIG_VIDEO_TM6000 is not set
+# CONFIG_VIDEO_TVAUDIO is not set
+# CONFIG_VIDEO_TVP514X is not set
+# CONFIG_VIDEO_TVP5150 is not set
+# CONFIG_VIDEO_TVP7002 is not set
+# CONFIG_VIDEO_TW2804 is not set
+# CONFIG_VIDEO_TW9903 is not set
+# CONFIG_VIDEO_TW9906 is not set
+# CONFIG_VIDEO_TW9910 is not set
+# CONFIG_VIDEO_UDA1342 is not set
+# CONFIG_VIDEO_UPD64031A is not set
+# CONFIG_VIDEO_UPD64083 is not set
+# CONFIG_VIDEO_USBTV is not set
+# CONFIG_VIDEO_USBVISION is not set
+# CONFIG_VIDEO_V4L2 is not set
+# CONFIG_VIDEO_VP27SMPX is not set
+# CONFIG_VIDEO_VPX3220 is not set
+# CONFIG_VIDEO_VS6624 is not set
+# CONFIG_VIDEO_WM8739 is not set
+# CONFIG_VIDEO_WM8775 is not set
+# CONFIG_VIDEO_ZORAN is not set
+# CONFIG_VIRTIO_BALLOON is not set
+# CONFIG_VIRTIO_BLK_SCSI is not set
+# CONFIG_VIRTIO_INPUT is not set
+CONFIG_VIRTIO_MENU=y
+# CONFIG_VIRTIO_MMIO is not set
+# CONFIG_VIRTIO_PCI is not set
+# CONFIG_VIRTUALIZATION is not set
+# CONFIG_VIRT_CPU_ACCOUNTING_GEN is not set
+# CONFIG_VIRT_DRIVERS is not set
+CONFIG_VIRT_TO_BUS=y
+# CONFIG_VITESSE_PHY is not set
+# CONFIG_VL6180 is not set
+CONFIG_VLAN_8021Q=y
+# CONFIG_VLAN_8021Q_GVRP is not set
+# CONFIG_VLAN_8021Q_MVRP is not set
+# CONFIG_VME_BUS is not set
+# CONFIG_VMSPLIT_1G is not set
+# CONFIG_VMSPLIT_2G is not set
+# CONFIG_VMSPLIT_2G_OPT is not set
+CONFIG_VMSPLIT_3G=y
+# CONFIG_VMSPLIT_3G_OPT is not set
+# CONFIG_VMWARE_PVSCSI is not set
+# CONFIG_VMXNET3 is not set
+# CONFIG_VM_EVENT_COUNTERS is not set
+# CONFIG_VOP_BUS is not set
+# CONFIG_VORTEX is not set
+# CONFIG_VSOCKETS is not set
+# CONFIG_VSOCKETS_DIAG is not set
+# CONFIG_VT is not set
+# CONFIG_VT6655 is not set
+# CONFIG_VT6656 is not set
+# CONFIG_VXFS_FS is not set
+# CONFIG_VXGE is not set
+# CONFIG_VXLAN is not set
+# CONFIG_VZ89X is not set
+# CONFIG_W1 is not set
+# CONFIG_W1_CON is not set
+# CONFIG_W1_MASTER_DS1WM is not set
+# CONFIG_W1_MASTER_DS2482 is not set
+# CONFIG_W1_MASTER_DS2490 is not set
+# CONFIG_W1_MASTER_GPIO is not set
+# CONFIG_W1_MASTER_MATROX is not set
+# CONFIG_W1_SLAVE_BQ27000 is not set
+# CONFIG_W1_SLAVE_DS2405 is not set
+# CONFIG_W1_SLAVE_DS2406 is not set
+# CONFIG_W1_SLAVE_DS2408 is not set
+# CONFIG_W1_SLAVE_DS2413 is not set
+# CONFIG_W1_SLAVE_DS2423 is not set
+# CONFIG_W1_SLAVE_DS2431 is not set
+# CONFIG_W1_SLAVE_DS2433 is not set
+# CONFIG_W1_SLAVE_DS2438 is not set
+# CONFIG_W1_SLAVE_DS2760 is not set
+# CONFIG_W1_SLAVE_DS2780 is not set
+# CONFIG_W1_SLAVE_DS2781 is not set
+# CONFIG_W1_SLAVE_DS2805 is not set
+# CONFIG_W1_SLAVE_DS28E04 is not set
+# CONFIG_W1_SLAVE_DS28E17 is not set
+# CONFIG_W1_SLAVE_SMEM is not set
+# CONFIG_W1_SLAVE_THERM is not set
+# CONFIG_W83627HF_WDT is not set
+# CONFIG_W83877F_WDT is not set
+# CONFIG_W83977F_WDT is not set
+# CONFIG_WAN is not set
+# CONFIG_WANXL is not set
+# CONFIG_WARN_ALL_UNSEEDED_RANDOM is not set
+CONFIG_WATCHDOG=y
+# CONFIG_WATCHDOG_CORE is not set
+CONFIG_WATCHDOG_HANDLE_BOOT_ENABLED=y
+# CONFIG_WATCHDOG_NOWAYOUT is not set
+# CONFIG_WATCHDOG_PRETIMEOUT_GOV is not set
+# CONFIG_WATCHDOG_SYSFS is not set
+# CONFIG_WD80x3 is not set
+# CONFIG_WDAT_WDT is not set
+# CONFIG_WDTPCI is not set
+CONFIG_WEXT_CORE=y
+CONFIG_WEXT_PRIV=y
+CONFIG_WEXT_PROC=y
+CONFIG_WEXT_SPY=y
+CONFIG_WILINK_PLATFORM_DATA=y
+# CONFIG_WIMAX is not set
+# CONFIG_WIMAX_GDM72XX is not set
+CONFIG_WIRELESS=y
+CONFIG_WIRELESS_EXT=y
+# CONFIG_WIRELESS_WDS is not set
+# CONFIG_WIZNET_W5100 is not set
+# CONFIG_WIZNET_W5300 is not set
+# CONFIG_WL1251 is not set
+# CONFIG_WL12XX is not set
+# CONFIG_WL18XX is not set
+CONFIG_WLAN=y
+# CONFIG_WLAN_VENDOR_ADMTEK is not set
+# CONFIG_WLAN_VENDOR_ATH is not set
+# CONFIG_WLAN_VENDOR_ATMEL is not set
+# CONFIG_WLAN_VENDOR_BROADCOM is not set
+# CONFIG_WLAN_VENDOR_CISCO is not set
+# CONFIG_WLAN_VENDOR_INTEL is not set
+# CONFIG_WLAN_VENDOR_INTERSIL is not set
+# CONFIG_WLAN_VENDOR_MARVELL is not set
+# CONFIG_WLAN_VENDOR_MEDIATEK is not set
+# CONFIG_WLAN_VENDOR_QUANTENNA is not set
+# CONFIG_WLAN_VENDOR_RALINK is not set
+# CONFIG_WLAN_VENDOR_REALTEK is not set
+# CONFIG_WLAN_VENDOR_RSI is not set
+# CONFIG_WLAN_VENDOR_ST is not set
+# CONFIG_WLAN_VENDOR_TI is not set
+# CONFIG_WLAN_VENDOR_ZYDAS is not set
+# CONFIG_WLCORE is not set
+# CONFIG_WL_MEDIATEK is not set
+CONFIG_WL_TI=y
+CONFIG_WQ_POWER_EFFICIENT_DEFAULT=y
+# CONFIG_WQ_WATCHDOG is not set
+# CONFIG_WW_MUTEX_SELFTEST is not set
+# CONFIG_X25 is not set
+# CONFIG_X509_CERTIFICATE_PARSER is not set
+# CONFIG_X86_DEBUG_STATIC_CPU_HAS is not set
+# CONFIG_X86_PKG_TEMP_THERMAL is not set
+CONFIG_X86_SYSFB=y
+# CONFIG_XDP_SOCKETS is not set
+# CONFIG_XEN is not set
+# CONFIG_XEN_GRANT_DMA_ALLOC is not set
+# CONFIG_XEN_PVCALLS_FRONTEND is not set
+CONFIG_XEN_SCRUB_PAGES_DEFAULT=y
+CONFIG_XFRM=y
+# CONFIG_XFRM_INTERFACE is not set
+# CONFIG_XFRM_IPCOMP is not set
+# CONFIG_XFRM_MIGRATE is not set
+# CONFIG_XFRM_STATISTICS is not set
+# CONFIG_XFRM_SUB_POLICY is not set
+# CONFIG_XFRM_USER is not set
+# CONFIG_XFS_DEBUG is not set
+# CONFIG_XFS_FS is not set
+# CONFIG_XFS_ONLINE_SCRUB is not set
+# CONFIG_XFS_POSIX_ACL is not set
+# CONFIG_XFS_QUOTA is not set
+# CONFIG_XFS_RT is not set
+# CONFIG_XFS_WARN is not set
+# CONFIG_XILINX_AXI_EMAC is not set
+# CONFIG_XILINX_DMA is not set
+# CONFIG_XILINX_EMACLITE is not set
+# CONFIG_XILINX_GMII2RGMII is not set
+# CONFIG_XILINX_LL_TEMAC is not set
+# CONFIG_XILINX_VCU is not set
+# CONFIG_XILINX_WATCHDOG is not set
+# CONFIG_XILINX_ZYNQMP_DMA is not set
+# CONFIG_XILLYBUS is not set
+# CONFIG_XIL_AXIS_FIFO is not set
+# CONFIG_XIP_KERNEL is not set
+# CONFIG_XMON is not set
+CONFIG_XZ_DEC=y
+# CONFIG_XZ_DEC_ARM is not set
+# CONFIG_XZ_DEC_ARMTHUMB is not set
+# CONFIG_XZ_DEC_BCJ is not set
+# CONFIG_XZ_DEC_IA64 is not set
+# CONFIG_XZ_DEC_POWERPC is not set
+# CONFIG_XZ_DEC_SPARC is not set
+# CONFIG_XZ_DEC_TEST is not set
+# CONFIG_XZ_DEC_X86 is not set
+# CONFIG_YAM is not set
+# CONFIG_YELLOWFIN is not set
+# CONFIG_YENTA is not set
+# CONFIG_YENTA_O2 is not set
+# CONFIG_YENTA_RICOH is not set
+# CONFIG_YENTA_TI is not set
+# CONFIG_YENTA_TOSHIBA is not set
+# CONFIG_ZBUD is not set
+# CONFIG_ZD1211RW is not set
+# CONFIG_ZD1211RW_DEBUG is not set
+# CONFIG_ZEROPLUS_FF is not set
+# CONFIG_ZIIRAVE_WATCHDOG is not set
+# CONFIG_ZISOFS is not set
+# CONFIG_ZLIB_DEFLATE is not set
+# CONFIG_ZLIB_INFLATE is not set
+CONFIG_ZONE_DMA=y
+# CONFIG_ZOPT2201 is not set
+# CONFIG_ZPA2326 is not set
+# CONFIG_ZPOOL is not set
+# CONFIG_ZRAM is not set
+# CONFIG_ZRAM_MEMORY_TRACKING is not set
+# CONFIG_ZSMALLOC is not set
+# CONFIG_ZX_TDM is not set
diff --git a/target/linux/generic/hack-5.4/204-module_strip.patch b/target/linux/generic/hack-5.4/204-module_strip.patch
new file mode 100644
index 0000000000..41bb021e71
--- /dev/null
+++ b/target/linux/generic/hack-5.4/204-module_strip.patch
@@ -0,0 +1,206 @@
+From a779a482fb9b9f8fcdf8b2519c789b4b9bb5dd05 Mon Sep 17 00:00:00 2001
+From: Felix Fietkau <nbd@nbd.name>
+Date: Fri, 7 Jul 2017 16:56:48 +0200
+Subject: build: add a hack for removing non-essential module info
+
+Signed-off-by: Felix Fietkau <nbd@nbd.name>
+---
+ include/linux/module.h      | 13 ++++++++-----
+ include/linux/moduleparam.h | 15 ++++++++++++---
+ init/Kconfig                |  7 +++++++
+ kernel/module.c             |  5 ++++-
+ scripts/mod/modpost.c       | 12 ++++++++++++
+ 5 files changed, 43 insertions(+), 9 deletions(-)
+
+--- a/include/linux/module.h
++++ b/include/linux/module.h
+@@ -160,6 +160,7 @@ extern void cleanup_module(void);
+ 
+ /* Generic info of form tag = "info" */
+ #define MODULE_INFO(tag, info) __MODULE_INFO(tag, tag, info)
++#define MODULE_INFO_STRIP(tag, info) __MODULE_INFO_STRIP(tag, tag, info)
+ 
+ /* For userspace: you can also call me... */
+ #define MODULE_ALIAS(_alias) MODULE_INFO(alias, _alias)
+@@ -203,12 +204,12 @@ extern void cleanup_module(void);
+  * Author(s), use "Name <email>" or just "Name", for multiple
+  * authors use multiple MODULE_AUTHOR() statements/lines.
+  */
+-#define MODULE_AUTHOR(_author) MODULE_INFO(author, _author)
++#define MODULE_AUTHOR(_author) MODULE_INFO_STRIP(author, _author)
+ 
+ /* What your module does. */
+-#define MODULE_DESCRIPTION(_description) MODULE_INFO(description, _description)
++#define MODULE_DESCRIPTION(_description) MODULE_INFO_STRIP(description, _description)
+ 
+-#ifdef MODULE
++#if defined(MODULE) && !defined(CONFIG_MODULE_STRIPPED)
+ /* Creates an alias so file2alias.c can find device table. */
+ #define MODULE_DEVICE_TABLE(type, name)					\
+ extern typeof(name) __mod_##type##__##name##_device_table		\
+@@ -235,7 +236,9 @@ extern typeof(name) __mod_##type##__##na
+  */
+ 
+ #if defined(MODULE) || !defined(CONFIG_SYSFS)
+-#define MODULE_VERSION(_version) MODULE_INFO(version, _version)
++#define MODULE_VERSION(_version) MODULE_INFO_STRIP(version, _version)
++#elif defined(CONFIG_MODULE_STRIPPED)
++#define MODULE_VERSION(_version) __MODULE_INFO_DISABLED(version)
+ #else
+ #define MODULE_VERSION(_version)					\
+ 	static struct module_version_attribute ___modver_attr = {	\
+@@ -257,7 +260,7 @@ extern typeof(name) __mod_##type##__##na
+ /* Optional firmware file (or files) needed by the module
+  * format is simply firmware file name.  Multiple firmware
+  * files require multiple MODULE_FIRMWARE() specifiers */
+-#define MODULE_FIRMWARE(_firmware) MODULE_INFO(firmware, _firmware)
++#define MODULE_FIRMWARE(_firmware) MODULE_INFO_STRIP(firmware, _firmware)
+ 
+ struct notifier_block;
+ 
+--- a/include/linux/moduleparam.h
++++ b/include/linux/moduleparam.h
+@@ -17,6 +17,16 @@
+ /* Chosen so that structs with an unsigned long line up. */
+ #define MAX_PARAM_PREFIX_LEN (64 - sizeof(unsigned long))
+ 
++/* This struct is here for syntactic coherency, it is not used */
++#define __MODULE_INFO_DISABLED(name)					  \
++  struct __UNIQUE_ID(name) {}
++
++#ifdef CONFIG_MODULE_STRIPPED
++#define __MODULE_INFO_STRIP(tag, name, info) __MODULE_INFO_DISABLED(name)
++#else
++#define __MODULE_INFO_STRIP(tag, name, info) __MODULE_INFO(tag, name, info)
++#endif
++
+ #ifdef MODULE
+ #define __MODULE_INFO(tag, name, info)					  \
+ static const char __UNIQUE_ID(name)[]					  \
+@@ -24,8 +34,7 @@ static const char __UNIQUE_ID(name)[]
+   = __stringify(tag) "=" info
+ #else  /* !MODULE */
+ /* This struct is here for syntactic coherency, it is not used */
+-#define __MODULE_INFO(tag, name, info)					  \
+-  struct __UNIQUE_ID(name) {}
++#define __MODULE_INFO(tag, name, info) __MODULE_INFO_DISABLED(name)
+ #endif
+ #define __MODULE_PARM_TYPE(name, _type)					  \
+   __MODULE_INFO(parmtype, name##type, #name ":" _type)
+@@ -33,7 +42,7 @@ static const char __UNIQUE_ID(name)[]
+ /* One for each parameter, describing how to use it.  Some files do
+    multiple of these per line, so can't just use MODULE_INFO. */
+ #define MODULE_PARM_DESC(_parm, desc) \
+-	__MODULE_INFO(parm, _parm, #_parm ":" desc)
++	__MODULE_INFO_STRIP(parm, _parm, #_parm ":" desc)
+ 
+ struct kernel_param;
+ 
+--- a/init/Kconfig
++++ b/init/Kconfig
+@@ -1997,6 +1997,13 @@ config TRIM_UNUSED_KSYMS
+ 
+ 	  If unsure, or if you need to build out-of-tree modules, say N.
+ 
++config MODULE_STRIPPED
++	bool "Reduce module size"
++	depends on MODULES
++	help
++	  Remove module parameter descriptions, author info, version, aliases,
++	  device tables, etc.
++
+ endif # MODULES
+ 
+ config MODULES_TREE_LOOKUP
+--- a/kernel/module.c
++++ b/kernel/module.c
+@@ -3029,9 +3029,11 @@ static int setup_load_info(struct load_i
+ 
+ static int check_modinfo(struct module *mod, struct load_info *info, int flags)
+ {
+-	const char *modmagic = get_modinfo(info, "vermagic");
+ 	int err;
+ 
++#ifndef CONFIG_MODULE_STRIPPED
++	const char *modmagic = get_modinfo(info, "vermagic");
++
+ 	if (flags & MODULE_INIT_IGNORE_VERMAGIC)
+ 		modmagic = NULL;
+ 
+@@ -3052,6 +3054,7 @@ static int check_modinfo(struct module *
+ 				mod->name);
+ 		add_taint_module(mod, TAINT_OOT_MODULE, LOCKDEP_STILL_OK);
+ 	}
++#endif
+ 
+ 	check_modinfo_retpoline(mod, info);
+ 
+--- a/scripts/mod/modpost.c
++++ b/scripts/mod/modpost.c
+@@ -1983,7 +1983,9 @@ static void read_symbols(const char *mod
+ 		symname = remove_dot(info.strtab + sym->st_name);
+ 
+ 		handle_modversions(mod, &info, sym, symname);
++#ifndef CONFIG_MODULE_STRIPPED
+ 		handle_moddevtable(mod, &info, sym, symname);
++#endif
+ 	}
+ 	if (!is_vmlinux(modname) || vmlinux_section_warnings)
+ 		check_sec_ref(mod, modname, &info);
+@@ -2146,8 +2148,10 @@ static void add_header(struct buffer *b,
+ 	buf_printf(b, "\n");
+ 	buf_printf(b, "BUILD_SALT;\n");
+ 	buf_printf(b, "\n");
++#ifndef CONFIG_MODULE_STRIPPED
+ 	buf_printf(b, "MODULE_INFO(vermagic, VERMAGIC_STRING);\n");
+ 	buf_printf(b, "MODULE_INFO(name, KBUILD_MODNAME);\n");
++#endif
+ 	buf_printf(b, "\n");
+ 	buf_printf(b, "__visible struct module __this_module\n");
+ 	buf_printf(b, "__attribute__((section(\".gnu.linkonce.this_module\"))) = {\n");
+@@ -2164,8 +2168,10 @@ static void add_header(struct buffer *b,
+ 
+ static void add_intree_flag(struct buffer *b, int is_intree)
+ {
++#ifndef CONFIG_MODULE_STRIPPED
+ 	if (is_intree)
+ 		buf_printf(b, "\nMODULE_INFO(intree, \"Y\");\n");
++#endif
+ }
+ 
+ /* Cannot check for assembler */
+@@ -2178,8 +2184,10 @@ static void add_retpoline(struct buffer
+ 
+ static void add_staging_flag(struct buffer *b, const char *name)
+ {
++#ifndef CONFIG_MODULE_STRIPPED
+ 	if (strstarts(name, "drivers/staging"))
+ 		buf_printf(b, "\nMODULE_INFO(staging, \"Y\");\n");
++#endif
+ }
+ 
+ /**
+@@ -2278,11 +2286,13 @@ static void add_depends(struct buffer *b
+ 
+ static void add_srcversion(struct buffer *b, struct module *mod)
+ {
++#ifndef CONFIG_MODULE_STRIPPED
+ 	if (mod->srcversion[0]) {
+ 		buf_printf(b, "\n");
+ 		buf_printf(b, "MODULE_INFO(srcversion, \"%s\");\n",
+ 			   mod->srcversion);
+ 	}
++#endif
+ }
+ 
+ static void write_if_changed(struct buffer *b, const char *fname)
+@@ -2519,7 +2529,9 @@ int main(int argc, char **argv)
+ 		add_staging_flag(&buf, mod->name);
+ 		err |= add_versions(&buf, mod);
+ 		add_depends(&buf, mod, modules);
++#ifndef CONFIG_MODULE_STRIPPED
+ 		add_moddevtable(&buf, mod);
++#endif
+ 		add_srcversion(&buf, mod);
+ 
+ 		sprintf(fname, "%s.mod.c", mod->name);
diff --git a/target/linux/generic/hack-5.4/207-disable-modorder.patch b/target/linux/generic/hack-5.4/207-disable-modorder.patch
new file mode 100644
index 0000000000..f47da3f24e
--- /dev/null
+++ b/target/linux/generic/hack-5.4/207-disable-modorder.patch
@@ -0,0 +1,44 @@
+From c9ef4ab0f54356ee9f91d9676ea0ec123840ddc7 Mon Sep 17 00:00:00 2001
+From: Felix Fietkau <nbd@nbd.name>
+Date: Fri, 7 Jul 2017 16:57:33 +0200
+Subject: kernel: do not build modules.order
+
+It is not needed for anything on the system and skipping this saves some
+build time, especially in cases where there is nothing to do.
+
+lede-commit: afc1675833a7bf5df094f59f7250369520646d04
+Signed-off-by: Felix Fietkau <nbd@nbd.name>
+---
+ Makefile               | 2 --
+ scripts/Makefile.build | 2 +-
+ 2 files changed, 1 insertion(+), 3 deletions(-)
+
+--- a/Makefile
++++ b/Makefile
+@@ -1232,7 +1232,6 @@ all: modules
+ 
+ PHONY += modules
+ modules: $(vmlinux-dirs) $(if $(KBUILD_BUILTIN),vmlinux) modules.builtin
+-	$(Q)$(AWK) '!x[$$0]++' $(vmlinux-dirs:%=$(objtree)/%/modules.order) > $(objtree)/modules.order
+ 	@$(kecho) '  Building modules, stage 2.';
+ 	$(Q)$(MAKE) -f $(srctree)/scripts/Makefile.modpost
+ 
+@@ -1261,7 +1260,6 @@ _modinst_:
+ 		rm -f $(MODLIB)/build ; \
+ 		ln -s $(CURDIR) $(MODLIB)/build ; \
+ 	fi
+-	@cp -f $(objtree)/modules.order $(MODLIB)/
+ 	@cp -f $(objtree)/modules.builtin $(MODLIB)/
+ 	$(Q)$(MAKE) -f $(srctree)/scripts/Makefile.modinst
+ 
+--- a/scripts/Makefile.build
++++ b/scripts/Makefile.build
+@@ -78,7 +78,7 @@ modorder-target := $(obj)/modules.order
+ # We keep a list of all modules in $(MODVERDIR)
+ 
+ __build: $(if $(KBUILD_BUILTIN),$(builtin-target) $(lib-target) $(extra-y)) \
+-	 $(if $(KBUILD_MODULES),$(obj-m) $(modorder-target)) \
++	 $(if $(KBUILD_MODULES),$(obj-m)) \
+ 	 $(subdir-ym) $(always)
+ 	@:
+ 
diff --git a/target/linux/generic/hack-5.4/210-darwin_scripts_include.patch b/target/linux/generic/hack-5.4/210-darwin_scripts_include.patch
new file mode 100644
index 0000000000..be6adc0d11
--- /dev/null
+++ b/target/linux/generic/hack-5.4/210-darwin_scripts_include.patch
@@ -0,0 +1,3053 @@
+From db7c30dcd9a0391bf13b62c9f91e144d762ef43a Mon Sep 17 00:00:00 2001
+From: Florian Fainelli <f.fainelli@gmail.com>
+Date: Fri, 7 Jul 2017 17:00:49 +0200
+Subject: Add an OSX specific patch to make the kernel be compiled
+
+lede-commit: 3fc2a24f0422b2f55f9ed43f116db3111f700526
+Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
+---
+ scripts/kconfig/Makefile   |    3 +
+ scripts/mod/elf.h          | 3007 ++++++++++++++++++++++++++++++++++++++++++++
+ scripts/mod/mk_elfconfig.c |    4 +
+ scripts/mod/modpost.h      |    4 +
+ 4 files changed, 3018 insertions(+)
+ create mode 100644 scripts/mod/elf.h
+
+--- /dev/null
++++ b/scripts/mod/elf.h
+@@ -0,0 +1,3007 @@
++/* This file defines standard ELF types, structures, and macros.
++   Copyright (C) 1995-2012 Free Software Foundation, Inc.
++   This file is part of the GNU C Library.
++
++   The GNU C Library is free software; you can redistribute it and/or
++   modify it under the terms of the GNU Lesser General Public
++   License as published by the Free Software Foundation; either
++   version 2.1 of the License, or (at your option) any later version.
++
++   The GNU C Library is distributed in the hope that it will be useful,
++   but WITHOUT ANY WARRANTY; without even the implied warranty of
++   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
++   Lesser General Public License for more details.
++
++   You should have received a copy of the GNU Lesser General Public
++   License along with the GNU C Library; if not, see
++   <http://www.gnu.org/licenses/>.  */
++
++#ifndef _ELF_H
++#define	_ELF_H 1
++
++/* Standard ELF types.  */
++
++#include <stdint.h>
++
++/* Type for a 16-bit quantity.  */
++typedef uint16_t Elf32_Half;
++typedef uint16_t Elf64_Half;
++
++/* Types for signed and unsigned 32-bit quantities.  */
++typedef uint32_t Elf32_Word;
++typedef	int32_t  Elf32_Sword;
++typedef uint32_t Elf64_Word;
++typedef	int32_t  Elf64_Sword;
++
++/* Types for signed and unsigned 64-bit quantities.  */
++typedef uint64_t Elf32_Xword;
++typedef	int64_t  Elf32_Sxword;
++typedef uint64_t Elf64_Xword;
++typedef	int64_t  Elf64_Sxword;
++
++/* Type of addresses.  */
++typedef uint32_t Elf32_Addr;
++typedef uint64_t Elf64_Addr;
++
++/* Type of file offsets.  */
++typedef uint32_t Elf32_Off;
++typedef uint64_t Elf64_Off;
++
++/* Type for section indices, which are 16-bit quantities.  */
++typedef uint16_t Elf32_Section;
++typedef uint16_t Elf64_Section;
++
++/* Type for version symbol information.  */
++typedef Elf32_Half Elf32_Versym;
++typedef Elf64_Half Elf64_Versym;
++
++
++/* The ELF file header.  This appears at the start of every ELF file.  */
++
++#define EI_NIDENT (16)
++
++typedef struct
++{
++  unsigned char	e_ident[EI_NIDENT];	/* Magic number and other info */
++  Elf32_Half	e_type;			/* Object file type */
++  Elf32_Half	e_machine;		/* Architecture */
++  Elf32_Word	e_version;		/* Object file version */
++  Elf32_Addr	e_entry;		/* Entry point virtual address */
++  Elf32_Off	e_phoff;		/* Program header table file offset */
++  Elf32_Off	e_shoff;		/* Section header table file offset */
++  Elf32_Word	e_flags;		/* Processor-specific flags */
++  Elf32_Half	e_ehsize;		/* ELF header size in bytes */
++  Elf32_Half	e_phentsize;		/* Program header table entry size */
++  Elf32_Half	e_phnum;		/* Program header table entry count */
++  Elf32_Half	e_shentsize;		/* Section header table entry size */
++  Elf32_Half	e_shnum;		/* Section header table entry count */
++  Elf32_Half	e_shstrndx;		/* Section header string table index */
++} Elf32_Ehdr;
++
++typedef struct
++{
++  unsigned char	e_ident[EI_NIDENT];	/* Magic number and other info */
++  Elf64_Half	e_type;			/* Object file type */
++  Elf64_Half	e_machine;		/* Architecture */
++  Elf64_Word	e_version;		/* Object file version */
++  Elf64_Addr	e_entry;		/* Entry point virtual address */
++  Elf64_Off	e_phoff;		/* Program header table file offset */
++  Elf64_Off	e_shoff;		/* Section header table file offset */
++  Elf64_Word	e_flags;		/* Processor-specific flags */
++  Elf64_Half	e_ehsize;		/* ELF header size in bytes */
++  Elf64_Half	e_phentsize;		/* Program header table entry size */
++  Elf64_Half	e_phnum;		/* Program header table entry count */
++  Elf64_Half	e_shentsize;		/* Section header table entry size */
++  Elf64_Half	e_shnum;		/* Section header table entry count */
++  Elf64_Half	e_shstrndx;		/* Section header string table index */
++} Elf64_Ehdr;
++
++/* Fields in the e_ident array.  The EI_* macros are indices into the
++   array.  The macros under each EI_* macro are the values the byte
++   may have.  */
++
++#define EI_MAG0		0		/* File identification byte 0 index */
++#define ELFMAG0		0x7f		/* Magic number byte 0 */
++
++#define EI_MAG1		1		/* File identification byte 1 index */
++#define ELFMAG1		'E'		/* Magic number byte 1 */
++
++#define EI_MAG2		2		/* File identification byte 2 index */
++#define ELFMAG2		'L'		/* Magic number byte 2 */
++
++#define EI_MAG3		3		/* File identification byte 3 index */
++#define ELFMAG3		'F'		/* Magic number byte 3 */
++
++/* Conglomeration of the identification bytes, for easy testing as a word.  */
++#define	ELFMAG		"\177ELF"
++#define	SELFMAG		4
++
++#define EI_CLASS	4		/* File class byte index */
++#define ELFCLASSNONE	0		/* Invalid class */
++#define ELFCLASS32	1		/* 32-bit objects */
++#define ELFCLASS64	2		/* 64-bit objects */
++#define ELFCLASSNUM	3
++
++#define EI_DATA		5		/* Data encoding byte index */
++#define ELFDATANONE	0		/* Invalid data encoding */
++#define ELFDATA2LSB	1		/* 2's complement, little endian */
++#define ELFDATA2MSB	2		/* 2's complement, big endian */
++#define ELFDATANUM	3
++
++#define EI_VERSION	6		/* File version byte index */
++					/* Value must be EV_CURRENT */
++
++#define EI_OSABI	7		/* OS ABI identification */
++#define ELFOSABI_NONE		0	/* UNIX System V ABI */
++#define ELFOSABI_SYSV		0	/* Alias.  */
++#define ELFOSABI_HPUX		1	/* HP-UX */
++#define ELFOSABI_NETBSD		2	/* NetBSD.  */
++#define ELFOSABI_GNU		3	/* Object uses GNU ELF extensions.  */
++#define ELFOSABI_LINUX		ELFOSABI_GNU /* Compatibility alias.  */
++#define ELFOSABI_SOLARIS	6	/* Sun Solaris.  */
++#define ELFOSABI_AIX		7	/* IBM AIX.  */
++#define ELFOSABI_IRIX		8	/* SGI Irix.  */
++#define ELFOSABI_FREEBSD	9	/* FreeBSD.  */
++#define ELFOSABI_TRU64		10	/* Compaq TRU64 UNIX.  */
++#define ELFOSABI_MODESTO	11	/* Novell Modesto.  */
++#define ELFOSABI_OPENBSD	12	/* OpenBSD.  */
++#define ELFOSABI_ARM_AEABI	64	/* ARM EABI */
++#define ELFOSABI_ARM		97	/* ARM */
++#define ELFOSABI_STANDALONE	255	/* Standalone (embedded) application */
++
++#define EI_ABIVERSION	8		/* ABI version */
++
++#define EI_PAD		9		/* Byte index of padding bytes */
++
++/* Legal values for e_type (object file type).  */
++
++#define ET_NONE		0		/* No file type */
++#define ET_REL		1		/* Relocatable file */
++#define ET_EXEC		2		/* Executable file */
++#define ET_DYN		3		/* Shared object file */
++#define ET_CORE		4		/* Core file */
++#define	ET_NUM		5		/* Number of defined types */
++#define ET_LOOS		0xfe00		/* OS-specific range start */
++#define ET_HIOS		0xfeff		/* OS-specific range end */
++#define ET_LOPROC	0xff00		/* Processor-specific range start */
++#define ET_HIPROC	0xffff		/* Processor-specific range end */
++
++/* Legal values for e_machine (architecture).  */
++
++#define EM_NONE		 0		/* No machine */
++#define EM_M32		 1		/* AT&T WE 32100 */
++#define EM_SPARC	 2		/* SUN SPARC */
++#define EM_386		 3		/* Intel 80386 */
++#define EM_68K		 4		/* Motorola m68k family */
++#define EM_88K		 5		/* Motorola m88k family */
++#define EM_860		 7		/* Intel 80860 */
++#define EM_MIPS		 8		/* MIPS R3000 big-endian */
++#define EM_S370		 9		/* IBM System/370 */
++#define EM_MIPS_RS3_LE	10		/* MIPS R3000 little-endian */
++
++#define EM_PARISC	15		/* HPPA */
++#define EM_VPP500	17		/* Fujitsu VPP500 */
++#define EM_SPARC32PLUS	18		/* Sun's "v8plus" */
++#define EM_960		19		/* Intel 80960 */
++#define EM_PPC		20		/* PowerPC */
++#define EM_PPC64	21		/* PowerPC 64-bit */
++#define EM_S390		22		/* IBM S390 */
++
++#define EM_V800		36		/* NEC V800 series */
++#define EM_FR20		37		/* Fujitsu FR20 */
++#define EM_RH32		38		/* TRW RH-32 */
++#define EM_RCE		39		/* Motorola RCE */
++#define EM_ARM		40		/* ARM */
++#define EM_FAKE_ALPHA	41		/* Digital Alpha */
++#define EM_SH		42		/* Hitachi SH */
++#define EM_SPARCV9	43		/* SPARC v9 64-bit */
++#define EM_TRICORE	44		/* Siemens Tricore */
++#define EM_ARC		45		/* Argonaut RISC Core */
++#define EM_H8_300	46		/* Hitachi H8/300 */
++#define EM_H8_300H	47		/* Hitachi H8/300H */
++#define EM_H8S		48		/* Hitachi H8S */
++#define EM_H8_500	49		/* Hitachi H8/500 */
++#define EM_IA_64	50		/* Intel Merced */
++#define EM_MIPS_X	51		/* Stanford MIPS-X */
++#define EM_COLDFIRE	52		/* Motorola Coldfire */
++#define EM_68HC12	53		/* Motorola M68HC12 */
++#define EM_MMA		54		/* Fujitsu MMA Multimedia Accelerator*/
++#define EM_PCP		55		/* Siemens PCP */
++#define EM_NCPU		56		/* Sony nCPU embeeded RISC */
++#define EM_NDR1		57		/* Denso NDR1 microprocessor */
++#define EM_STARCORE	58		/* Motorola Start*Core processor */
++#define EM_ME16		59		/* Toyota ME16 processor */
++#define EM_ST100	60		/* STMicroelectronic ST100 processor */
++#define EM_TINYJ	61		/* Advanced Logic Corp. Tinyj emb.fam*/
++#define EM_X86_64	62		/* AMD x86-64 architecture */
++#define EM_PDSP		63		/* Sony DSP Processor */
++
++#define EM_FX66		66		/* Siemens FX66 microcontroller */
++#define EM_ST9PLUS	67		/* STMicroelectronics ST9+ 8/16 mc */
++#define EM_ST7		68		/* STmicroelectronics ST7 8 bit mc */
++#define EM_68HC16	69		/* Motorola MC68HC16 microcontroller */
++#define EM_68HC11	70		/* Motorola MC68HC11 microcontroller */
++#define EM_68HC08	71		/* Motorola MC68HC08 microcontroller */
++#define EM_68HC05	72		/* Motorola MC68HC05 microcontroller */
++#define EM_SVX		73		/* Silicon Graphics SVx */
++#define EM_ST19		74		/* STMicroelectronics ST19 8 bit mc */
++#define EM_VAX		75		/* Digital VAX */
++#define EM_CRIS		76		/* Axis Communications 32-bit embedded processor */
++#define EM_JAVELIN	77		/* Infineon Technologies 32-bit embedded processor */
++#define EM_FIREPATH	78		/* Element 14 64-bit DSP Processor */
++#define EM_ZSP		79		/* LSI Logic 16-bit DSP Processor */
++#define EM_MMIX		80		/* Donald Knuth's educational 64-bit processor */
++#define EM_HUANY	81		/* Harvard University machine-independent object files */
++#define EM_PRISM	82		/* SiTera Prism */
++#define EM_AVR		83		/* Atmel AVR 8-bit microcontroller */
++#define EM_FR30		84		/* Fujitsu FR30 */
++#define EM_D10V		85		/* Mitsubishi D10V */
++#define EM_D30V		86		/* Mitsubishi D30V */
++#define EM_V850		87		/* NEC v850 */
++#define EM_M32R		88		/* Mitsubishi M32R */
++#define EM_MN10300	89		/* Matsushita MN10300 */
++#define EM_MN10200	90		/* Matsushita MN10200 */
++#define EM_PJ		91		/* picoJava */
++#define EM_OPENRISC	92		/* OpenRISC 32-bit embedded processor */
++#define EM_ARC_A5	93		/* ARC Cores Tangent-A5 */
++#define EM_XTENSA	94		/* Tensilica Xtensa Architecture */
++#define EM_TILEPRO	188		/* Tilera TILEPro */
++#define EM_TILEGX	191		/* Tilera TILE-Gx */
++#define EM_NUM		192
++
++/* If it is necessary to assign new unofficial EM_* values, please
++   pick large random numbers (0x8523, 0xa7f2, etc.) to minimize the
++   chances of collision with official or non-GNU unofficial values.  */
++
++#define EM_ALPHA	0x9026
++
++/* Legal values for e_version (version).  */
++
++#define EV_NONE		0		/* Invalid ELF version */
++#define EV_CURRENT	1		/* Current version */
++#define EV_NUM		2
++
++/* Section header.  */
++
++typedef struct
++{
++  Elf32_Word	sh_name;		/* Section name (string tbl index) */
++  Elf32_Word	sh_type;		/* Section type */
++  Elf32_Word	sh_flags;		/* Section flags */
++  Elf32_Addr	sh_addr;		/* Section virtual addr at execution */
++  Elf32_Off	sh_offset;		/* Section file offset */
++  Elf32_Word	sh_size;		/* Section size in bytes */
++  Elf32_Word	sh_link;		/* Link to another section */
++  Elf32_Word	sh_info;		/* Additional section information */
++  Elf32_Word	sh_addralign;		/* Section alignment */
++  Elf32_Word	sh_entsize;		/* Entry size if section holds table */
++} Elf32_Shdr;
++
++typedef struct
++{
++  Elf64_Word	sh_name;		/* Section name (string tbl index) */
++  Elf64_Word	sh_type;		/* Section type */
++  Elf64_Xword	sh_flags;		/* Section flags */
++  Elf64_Addr	sh_addr;		/* Section virtual addr at execution */
++  Elf64_Off	sh_offset;		/* Section file offset */
++  Elf64_Xword	sh_size;		/* Section size in bytes */
++  Elf64_Word	sh_link;		/* Link to another section */
++  Elf64_Word	sh_info;		/* Additional section information */
++  Elf64_Xword	sh_addralign;		/* Section alignment */
++  Elf64_Xword	sh_entsize;		/* Entry size if section holds table */
++} Elf64_Shdr;
++
++/* Special section indices.  */
++
++#define SHN_UNDEF	0		/* Undefined section */
++#define SHN_LORESERVE	0xff00		/* Start of reserved indices */
++#define SHN_LOPROC	0xff00		/* Start of processor-specific */
++#define SHN_BEFORE	0xff00		/* Order section before all others
++					   (Solaris).  */
++#define SHN_AFTER	0xff01		/* Order section after all others
++					   (Solaris).  */
++#define SHN_HIPROC	0xff1f		/* End of processor-specific */
++#define SHN_LOOS	0xff20		/* Start of OS-specific */
++#define SHN_HIOS	0xff3f		/* End of OS-specific */
++#define SHN_ABS		0xfff1		/* Associated symbol is absolute */
++#define SHN_COMMON	0xfff2		/* Associated symbol is common */
++#define SHN_XINDEX	0xffff		/* Index is in extra table.  */
++#define SHN_HIRESERVE	0xffff		/* End of reserved indices */
++
++/* Legal values for sh_type (section type).  */
++
++#define SHT_NULL	  0		/* Section header table entry unused */
++#define SHT_PROGBITS	  1		/* Program data */
++#define SHT_SYMTAB	  2		/* Symbol table */
++#define SHT_STRTAB	  3		/* String table */
++#define SHT_RELA	  4		/* Relocation entries with addends */
++#define SHT_HASH	  5		/* Symbol hash table */
++#define SHT_DYNAMIC	  6		/* Dynamic linking information */
++#define SHT_NOTE	  7		/* Notes */
++#define SHT_NOBITS	  8		/* Program space with no data (bss) */
++#define SHT_REL		  9		/* Relocation entries, no addends */
++#define SHT_SHLIB	  10		/* Reserved */
++#define SHT_DYNSYM	  11		/* Dynamic linker symbol table */
++#define SHT_INIT_ARRAY	  14		/* Array of constructors */
++#define SHT_FINI_ARRAY	  15		/* Array of destructors */
++#define SHT_PREINIT_ARRAY 16		/* Array of pre-constructors */
++#define SHT_GROUP	  17		/* Section group */
++#define SHT_SYMTAB_SHNDX  18		/* Extended section indeces */
++#define	SHT_NUM		  19		/* Number of defined types.  */
++#define SHT_LOOS	  0x60000000	/* Start OS-specific.  */
++#define SHT_GNU_ATTRIBUTES 0x6ffffff5	/* Object attributes.  */
++#define SHT_GNU_HASH	  0x6ffffff6	/* GNU-style hash table.  */
++#define SHT_GNU_LIBLIST	  0x6ffffff7	/* Prelink library list */
++#define SHT_CHECKSUM	  0x6ffffff8	/* Checksum for DSO content.  */
++#define SHT_LOSUNW	  0x6ffffffa	/* Sun-specific low bound.  */
++#define SHT_SUNW_move	  0x6ffffffa
++#define SHT_SUNW_COMDAT   0x6ffffffb
++#define SHT_SUNW_syminfo  0x6ffffffc
++#define SHT_GNU_verdef	  0x6ffffffd	/* Version definition section.  */
++#define SHT_GNU_verneed	  0x6ffffffe	/* Version needs section.  */
++#define SHT_GNU_versym	  0x6fffffff	/* Version symbol table.  */
++#define SHT_HISUNW	  0x6fffffff	/* Sun-specific high bound.  */
++#define SHT_HIOS	  0x6fffffff	/* End OS-specific type */
++#define SHT_LOPROC	  0x70000000	/* Start of processor-specific */
++#define SHT_HIPROC	  0x7fffffff	/* End of processor-specific */
++#define SHT_LOUSER	  0x80000000	/* Start of application-specific */
++#define SHT_HIUSER	  0x8fffffff	/* End of application-specific */
++
++/* Legal values for sh_flags (section flags).  */
++
++#define SHF_WRITE	     (1 << 0)	/* Writable */
++#define SHF_ALLOC	     (1 << 1)	/* Occupies memory during execution */
++#define SHF_EXECINSTR	     (1 << 2)	/* Executable */
++#define SHF_MERGE	     (1 << 4)	/* Might be merged */
++#define SHF_STRINGS	     (1 << 5)	/* Contains nul-terminated strings */
++#define SHF_INFO_LINK	     (1 << 6)	/* `sh_info' contains SHT index */
++#define SHF_LINK_ORDER	     (1 << 7)	/* Preserve order after combining */
++#define SHF_OS_NONCONFORMING (1 << 8)	/* Non-standard OS specific handling
++					   required */
++#define SHF_GROUP	     (1 << 9)	/* Section is member of a group.  */
++#define SHF_TLS		     (1 << 10)	/* Section hold thread-local data.  */
++#define SHF_MASKOS	     0x0ff00000	/* OS-specific.  */
++#define SHF_MASKPROC	     0xf0000000	/* Processor-specific */
++#define SHF_ORDERED	     (1 << 30)	/* Special ordering requirement
++					   (Solaris).  */
++#define SHF_EXCLUDE	     (1 << 31)	/* Section is excluded unless
++					   referenced or allocated (Solaris).*/
++
++/* Section group handling.  */
++#define GRP_COMDAT	0x1		/* Mark group as COMDAT.  */
++
++/* Symbol table entry.  */
++
++typedef struct
++{
++  Elf32_Word	st_name;		/* Symbol name (string tbl index) */
++  Elf32_Addr	st_value;		/* Symbol value */
++  Elf32_Word	st_size;		/* Symbol size */
++  unsigned char	st_info;		/* Symbol type and binding */
++  unsigned char	st_other;		/* Symbol visibility */
++  Elf32_Section	st_shndx;		/* Section index */
++} Elf32_Sym;
++
++typedef struct
++{
++  Elf64_Word	st_name;		/* Symbol name (string tbl index) */
++  unsigned char	st_info;		/* Symbol type and binding */
++  unsigned char st_other;		/* Symbol visibility */
++  Elf64_Section	st_shndx;		/* Section index */
++  Elf64_Addr	st_value;		/* Symbol value */
++  Elf64_Xword	st_size;		/* Symbol size */
++} Elf64_Sym;
++
++/* The syminfo section if available contains additional information about
++   every dynamic symbol.  */
++
++typedef struct
++{
++  Elf32_Half si_boundto;		/* Direct bindings, symbol bound to */
++  Elf32_Half si_flags;			/* Per symbol flags */
++} Elf32_Syminfo;
++
++typedef struct
++{
++  Elf64_Half si_boundto;		/* Direct bindings, symbol bound to */
++  Elf64_Half si_flags;			/* Per symbol flags */
++} Elf64_Syminfo;
++
++/* Possible values for si_boundto.  */
++#define SYMINFO_BT_SELF		0xffff	/* Symbol bound to self */
++#define SYMINFO_BT_PARENT	0xfffe	/* Symbol bound to parent */
++#define SYMINFO_BT_LOWRESERVE	0xff00	/* Beginning of reserved entries */
++
++/* Possible bitmasks for si_flags.  */
++#define SYMINFO_FLG_DIRECT	0x0001	/* Direct bound symbol */
++#define SYMINFO_FLG_PASSTHRU	0x0002	/* Pass-thru symbol for translator */
++#define SYMINFO_FLG_COPY	0x0004	/* Symbol is a copy-reloc */
++#define SYMINFO_FLG_LAZYLOAD	0x0008	/* Symbol bound to object to be lazy
++					   loaded */
++/* Syminfo version values.  */
++#define SYMINFO_NONE		0
++#define SYMINFO_CURRENT		1
++#define SYMINFO_NUM		2
++
++
++/* How to extract and insert information held in the st_info field.  */
++
++#define ELF32_ST_BIND(val)		(((unsigned char) (val)) >> 4)
++#define ELF32_ST_TYPE(val)		((val) & 0xf)
++#define ELF32_ST_INFO(bind, type)	(((bind) << 4) + ((type) & 0xf))
++
++/* Both Elf32_Sym and Elf64_Sym use the same one-byte st_info field.  */
++#define ELF64_ST_BIND(val)		ELF32_ST_BIND (val)
++#define ELF64_ST_TYPE(val)		ELF32_ST_TYPE (val)
++#define ELF64_ST_INFO(bind, type)	ELF32_ST_INFO ((bind), (type))
++
++/* Legal values for ST_BIND subfield of st_info (symbol binding).  */
++
++#define STB_LOCAL	0		/* Local symbol */
++#define STB_GLOBAL	1		/* Global symbol */
++#define STB_WEAK	2		/* Weak symbol */
++#define	STB_NUM		3		/* Number of defined types.  */
++#define STB_LOOS	10		/* Start of OS-specific */
++#define STB_GNU_UNIQUE	10		/* Unique symbol.  */
++#define STB_HIOS	12		/* End of OS-specific */
++#define STB_LOPROC	13		/* Start of processor-specific */
++#define STB_HIPROC	15		/* End of processor-specific */
++
++/* Legal values for ST_TYPE subfield of st_info (symbol type).  */
++
++#define STT_NOTYPE	0		/* Symbol type is unspecified */
++#define STT_OBJECT	1		/* Symbol is a data object */
++#define STT_FUNC	2		/* Symbol is a code object */
++#define STT_SECTION	3		/* Symbol associated with a section */
++#define STT_FILE	4		/* Symbol's name is file name */
++#define STT_COMMON	5		/* Symbol is a common data object */
++#define STT_TLS		6		/* Symbol is thread-local data object*/
++#define	STT_NUM		7		/* Number of defined types.  */
++#define STT_LOOS	10		/* Start of OS-specific */
++#define STT_GNU_IFUNC	10		/* Symbol is indirect code object */
++#define STT_HIOS	12		/* End of OS-specific */
++#define STT_LOPROC	13		/* Start of processor-specific */
++#define STT_HIPROC	15		/* End of processor-specific */
++
++
++/* Symbol table indices are found in the hash buckets and chain table
++   of a symbol hash table section.  This special index value indicates
++   the end of a chain, meaning no further symbols are found in that bucket.  */
++
++#define STN_UNDEF	0		/* End of a chain.  */
++
++
++/* How to extract and insert information held in the st_other field.  */
++
++#define ELF32_ST_VISIBILITY(o)	((o) & 0x03)
++
++/* For ELF64 the definitions are the same.  */
++#define ELF64_ST_VISIBILITY(o)	ELF32_ST_VISIBILITY (o)
++
++/* Symbol visibility specification encoded in the st_other field.  */
++#define STV_DEFAULT	0		/* Default symbol visibility rules */
++#define STV_INTERNAL	1		/* Processor specific hidden class */
++#define STV_HIDDEN	2		/* Sym unavailable in other modules */
++#define STV_PROTECTED	3		/* Not preemptible, not exported */
++
++
++/* Relocation table entry without addend (in section of type SHT_REL).  */
++
++typedef struct
++{
++  Elf32_Addr	r_offset;		/* Address */
++  Elf32_Word	r_info;			/* Relocation type and symbol index */
++} Elf32_Rel;
++
++/* I have seen two different definitions of the Elf64_Rel and
++   Elf64_Rela structures, so we'll leave them out until Novell (or
++   whoever) gets their act together.  */
++/* The following, at least, is used on Sparc v9, MIPS, and Alpha.  */
++
++typedef struct
++{
++  Elf64_Addr	r_offset;		/* Address */
++  Elf64_Xword	r_info;			/* Relocation type and symbol index */
++} Elf64_Rel;
++
++/* Relocation table entry with addend (in section of type SHT_RELA).  */
++
++typedef struct
++{
++  Elf32_Addr	r_offset;		/* Address */
++  Elf32_Word	r_info;			/* Relocation type and symbol index */
++  Elf32_Sword	r_addend;		/* Addend */
++} Elf32_Rela;
++
++typedef struct
++{
++  Elf64_Addr	r_offset;		/* Address */
++  Elf64_Xword	r_info;			/* Relocation type and symbol index */
++  Elf64_Sxword	r_addend;		/* Addend */
++} Elf64_Rela;
++
++/* How to extract and insert information held in the r_info field.  */
++
++#define ELF32_R_SYM(val)		((val) >> 8)
++#define ELF32_R_TYPE(val)		((val) & 0xff)
++#define ELF32_R_INFO(sym, type)		(((sym) << 8) + ((type) & 0xff))
++
++#define ELF64_R_SYM(i)			((i) >> 32)
++#define ELF64_R_TYPE(i)			((i) & 0xffffffff)
++#define ELF64_R_INFO(sym,type)		((((Elf64_Xword) (sym)) << 32) + (type))
++
++/* Program segment header.  */
++
++typedef struct
++{
++  Elf32_Word	p_type;			/* Segment type */
++  Elf32_Off	p_offset;		/* Segment file offset */
++  Elf32_Addr	p_vaddr;		/* Segment virtual address */
++  Elf32_Addr	p_paddr;		/* Segment physical address */
++  Elf32_Word	p_filesz;		/* Segment size in file */
++  Elf32_Word	p_memsz;		/* Segment size in memory */
++  Elf32_Word	p_flags;		/* Segment flags */
++  Elf32_Word	p_align;		/* Segment alignment */
++} Elf32_Phdr;
++
++typedef struct
++{
++  Elf64_Word	p_type;			/* Segment type */
++  Elf64_Word	p_flags;		/* Segment flags */
++  Elf64_Off	p_offset;		/* Segment file offset */
++  Elf64_Addr	p_vaddr;		/* Segment virtual address */
++  Elf64_Addr	p_paddr;		/* Segment physical address */
++  Elf64_Xword	p_filesz;		/* Segment size in file */
++  Elf64_Xword	p_memsz;		/* Segment size in memory */
++  Elf64_Xword	p_align;		/* Segment alignment */
++} Elf64_Phdr;
++
++/* Special value for e_phnum.  This indicates that the real number of
++   program headers is too large to fit into e_phnum.  Instead the real
++   value is in the field sh_info of section 0.  */
++
++#define PN_XNUM		0xffff
++
++/* Legal values for p_type (segment type).  */
++
++#define	PT_NULL		0		/* Program header table entry unused */
++#define PT_LOAD		1		/* Loadable program segment */
++#define PT_DYNAMIC	2		/* Dynamic linking information */
++#define PT_INTERP	3		/* Program interpreter */
++#define PT_NOTE		4		/* Auxiliary information */
++#define PT_SHLIB	5		/* Reserved */
++#define PT_PHDR		6		/* Entry for header table itself */
++#define PT_TLS		7		/* Thread-local storage segment */
++#define	PT_NUM		8		/* Number of defined types */
++#define PT_LOOS		0x60000000	/* Start of OS-specific */
++#define PT_GNU_EH_FRAME	0x6474e550	/* GCC .eh_frame_hdr segment */
++#define PT_GNU_STACK	0x6474e551	/* Indicates stack executability */
++#define PT_GNU_RELRO	0x6474e552	/* Read-only after relocation */
++#define PT_LOSUNW	0x6ffffffa
++#define PT_SUNWBSS	0x6ffffffa	/* Sun Specific segment */
++#define PT_SUNWSTACK	0x6ffffffb	/* Stack segment */
++#define PT_HISUNW	0x6fffffff
++#define PT_HIOS		0x6fffffff	/* End of OS-specific */
++#define PT_LOPROC	0x70000000	/* Start of processor-specific */
++#define PT_HIPROC	0x7fffffff	/* End of processor-specific */
++
++/* Legal values for p_flags (segment flags).  */
++
++#define PF_X		(1 << 0)	/* Segment is executable */
++#define PF_W		(1 << 1)	/* Segment is writable */
++#define PF_R		(1 << 2)	/* Segment is readable */
++#define PF_MASKOS	0x0ff00000	/* OS-specific */
++#define PF_MASKPROC	0xf0000000	/* Processor-specific */
++
++/* Legal values for note segment descriptor types for core files. */
++
++#define NT_PRSTATUS	1		/* Contains copy of prstatus struct */
++#define NT_FPREGSET	2		/* Contains copy of fpregset struct */
++#define NT_PRPSINFO	3		/* Contains copy of prpsinfo struct */
++#define NT_PRXREG	4		/* Contains copy of prxregset struct */
++#define NT_TASKSTRUCT	4		/* Contains copy of task structure */
++#define NT_PLATFORM	5		/* String from sysinfo(SI_PLATFORM) */
++#define NT_AUXV		6		/* Contains copy of auxv array */
++#define NT_GWINDOWS	7		/* Contains copy of gwindows struct */
++#define NT_ASRS		8		/* Contains copy of asrset struct */
++#define NT_PSTATUS	10		/* Contains copy of pstatus struct */
++#define NT_PSINFO	13		/* Contains copy of psinfo struct */
++#define NT_PRCRED	14		/* Contains copy of prcred struct */
++#define NT_UTSNAME	15		/* Contains copy of utsname struct */
++#define NT_LWPSTATUS	16		/* Contains copy of lwpstatus struct */
++#define NT_LWPSINFO	17		/* Contains copy of lwpinfo struct */
++#define NT_PRFPXREG	20		/* Contains copy of fprxregset struct */
++#define NT_PRXFPREG	0x46e62b7f	/* Contains copy of user_fxsr_struct */
++#define NT_PPC_VMX	0x100		/* PowerPC Altivec/VMX registers */
++#define NT_PPC_SPE	0x101		/* PowerPC SPE/EVR registers */
++#define NT_PPC_VSX	0x102		/* PowerPC VSX registers */
++#define NT_386_TLS	0x200		/* i386 TLS slots (struct user_desc) */
++#define NT_386_IOPERM	0x201		/* x86 io permission bitmap (1=deny) */
++#define NT_X86_XSTATE	0x202		/* x86 extended state using xsave */
++
++/* Legal values for the note segment descriptor types for object files.  */
++
++#define NT_VERSION	1		/* Contains a version string.  */
++
++
++/* Dynamic section entry.  */
++
++typedef struct
++{
++  Elf32_Sword	d_tag;			/* Dynamic entry type */
++  union
++    {
++      Elf32_Word d_val;			/* Integer value */
++      Elf32_Addr d_ptr;			/* Address value */
++    } d_un;
++} Elf32_Dyn;
++
++typedef struct
++{
++  Elf64_Sxword	d_tag;			/* Dynamic entry type */
++  union
++    {
++      Elf64_Xword d_val;		/* Integer value */
++      Elf64_Addr d_ptr;			/* Address value */
++    } d_un;
++} Elf64_Dyn;
++
++/* Legal values for d_tag (dynamic entry type).  */
++
++#define DT_NULL		0		/* Marks end of dynamic section */
++#define DT_NEEDED	1		/* Name of needed library */
++#define DT_PLTRELSZ	2		/* Size in bytes of PLT relocs */
++#define DT_PLTGOT	3		/* Processor defined value */
++#define DT_HASH		4		/* Address of symbol hash table */
++#define DT_STRTAB	5		/* Address of string table */
++#define DT_SYMTAB	6		/* Address of symbol table */
++#define DT_RELA		7		/* Address of Rela relocs */
++#define DT_RELASZ	8		/* Total size of Rela relocs */
++#define DT_RELAENT	9		/* Size of one Rela reloc */
++#define DT_STRSZ	10		/* Size of string table */
++#define DT_SYMENT	11		/* Size of one symbol table entry */
++#define DT_INIT		12		/* Address of init function */
++#define DT_FINI		13		/* Address of termination function */
++#define DT_SONAME	14		/* Name of shared object */
++#define DT_RPATH	15		/* Library search path (deprecated) */
++#define DT_SYMBOLIC	16		/* Start symbol search here */
++#define DT_REL		17		/* Address of Rel relocs */
++#define DT_RELSZ	18		/* Total size of Rel relocs */
++#define DT_RELENT	19		/* Size of one Rel reloc */
++#define DT_PLTREL	20		/* Type of reloc in PLT */
++#define DT_DEBUG	21		/* For debugging; unspecified */
++#define DT_TEXTREL	22		/* Reloc might modify .text */
++#define DT_JMPREL	23		/* Address of PLT relocs */
++#define	DT_BIND_NOW	24		/* Process relocations of object */
++#define	DT_INIT_ARRAY	25		/* Array with addresses of init fct */
++#define	DT_FINI_ARRAY	26		/* Array with addresses of fini fct */
++#define	DT_INIT_ARRAYSZ	27		/* Size in bytes of DT_INIT_ARRAY */
++#define	DT_FINI_ARRAYSZ	28		/* Size in bytes of DT_FINI_ARRAY */
++#define DT_RUNPATH	29		/* Library search path */
++#define DT_FLAGS	30		/* Flags for the object being loaded */
++#define DT_ENCODING	32		/* Start of encoded range */
++#define DT_PREINIT_ARRAY 32		/* Array with addresses of preinit fct*/
++#define DT_PREINIT_ARRAYSZ 33		/* size in bytes of DT_PREINIT_ARRAY */
++#define	DT_NUM		34		/* Number used */
++#define DT_LOOS		0x6000000d	/* Start of OS-specific */
++#define DT_HIOS		0x6ffff000	/* End of OS-specific */
++#define DT_LOPROC	0x70000000	/* Start of processor-specific */
++#define DT_HIPROC	0x7fffffff	/* End of processor-specific */
++#define	DT_PROCNUM	DT_MIPS_NUM	/* Most used by any processor */
++
++/* DT_* entries which fall between DT_VALRNGHI & DT_VALRNGLO use the
++   Dyn.d_un.d_val field of the Elf*_Dyn structure.  This follows Sun's
++   approach.  */
++#define DT_VALRNGLO	0x6ffffd00
++#define DT_GNU_PRELINKED 0x6ffffdf5	/* Prelinking timestamp */
++#define DT_GNU_CONFLICTSZ 0x6ffffdf6	/* Size of conflict section */
++#define DT_GNU_LIBLISTSZ 0x6ffffdf7	/* Size of library list */
++#define DT_CHECKSUM	0x6ffffdf8
++#define DT_PLTPADSZ	0x6ffffdf9
++#define DT_MOVEENT	0x6ffffdfa
++#define DT_MOVESZ	0x6ffffdfb
++#define DT_FEATURE_1	0x6ffffdfc	/* Feature selection (DTF_*).  */
++#define DT_POSFLAG_1	0x6ffffdfd	/* Flags for DT_* entries, effecting
++					   the following DT_* entry.  */
++#define DT_SYMINSZ	0x6ffffdfe	/* Size of syminfo table (in bytes) */
++#define DT_SYMINENT	0x6ffffdff	/* Entry size of syminfo */
++#define DT_VALRNGHI	0x6ffffdff
++#define DT_VALTAGIDX(tag)	(DT_VALRNGHI - (tag))	/* Reverse order! */
++#define DT_VALNUM 12
++
++/* DT_* entries which fall between DT_ADDRRNGHI & DT_ADDRRNGLO use the
++   Dyn.d_un.d_ptr field of the Elf*_Dyn structure.
++
++   If any adjustment is made to the ELF object after it has been
++   built these entries will need to be adjusted.  */
++#define DT_ADDRRNGLO	0x6ffffe00
++#define DT_GNU_HASH	0x6ffffef5	/* GNU-style hash table.  */
++#define DT_TLSDESC_PLT	0x6ffffef6
++#define DT_TLSDESC_GOT	0x6ffffef7
++#define DT_GNU_CONFLICT	0x6ffffef8	/* Start of conflict section */
++#define DT_GNU_LIBLIST	0x6ffffef9	/* Library list */
++#define DT_CONFIG	0x6ffffefa	/* Configuration information.  */
++#define DT_DEPAUDIT	0x6ffffefb	/* Dependency auditing.  */
++#define DT_AUDIT	0x6ffffefc	/* Object auditing.  */
++#define	DT_PLTPAD	0x6ffffefd	/* PLT padding.  */
++#define	DT_MOVETAB	0x6ffffefe	/* Move table.  */
++#define DT_SYMINFO	0x6ffffeff	/* Syminfo table.  */
++#define DT_ADDRRNGHI	0x6ffffeff
++#define DT_ADDRTAGIDX(tag)	(DT_ADDRRNGHI - (tag))	/* Reverse order! */
++#define DT_ADDRNUM 11
++
++/* The versioning entry types.  The next are defined as part of the
++   GNU extension.  */
++#define DT_VERSYM	0x6ffffff0
++
++#define DT_RELACOUNT	0x6ffffff9
++#define DT_RELCOUNT	0x6ffffffa
++
++/* These were chosen by Sun.  */
++#define DT_FLAGS_1	0x6ffffffb	/* State flags, see DF_1_* below.  */
++#define	DT_VERDEF	0x6ffffffc	/* Address of version definition
++					   table */
++#define	DT_VERDEFNUM	0x6ffffffd	/* Number of version definitions */
++#define	DT_VERNEED	0x6ffffffe	/* Address of table with needed
++					   versions */
++#define	DT_VERNEEDNUM	0x6fffffff	/* Number of needed versions */
++#define DT_VERSIONTAGIDX(tag)	(DT_VERNEEDNUM - (tag))	/* Reverse order! */
++#define DT_VERSIONTAGNUM 16
++
++/* Sun added these machine-independent extensions in the "processor-specific"
++   range.  Be compatible.  */
++#define DT_AUXILIARY    0x7ffffffd      /* Shared object to load before self */
++#define DT_FILTER       0x7fffffff      /* Shared object to get values from */
++#define DT_EXTRATAGIDX(tag)	((Elf32_Word)-((Elf32_Sword) (tag) <<1>>1)-1)
++#define DT_EXTRANUM	3
++
++/* Values of `d_un.d_val' in the DT_FLAGS entry.  */
++#define DF_ORIGIN	0x00000001	/* Object may use DF_ORIGIN */
++#define DF_SYMBOLIC	0x00000002	/* Symbol resolutions starts here */
++#define DF_TEXTREL	0x00000004	/* Object contains text relocations */
++#define DF_BIND_NOW	0x00000008	/* No lazy binding for this object */
++#define DF_STATIC_TLS	0x00000010	/* Module uses the static TLS model */
++
++/* State flags selectable in the `d_un.d_val' element of the DT_FLAGS_1
++   entry in the dynamic section.  */
++#define DF_1_NOW	0x00000001	/* Set RTLD_NOW for this object.  */
++#define DF_1_GLOBAL	0x00000002	/* Set RTLD_GLOBAL for this object.  */
++#define DF_1_GROUP	0x00000004	/* Set RTLD_GROUP for this object.  */
++#define DF_1_NODELETE	0x00000008	/* Set RTLD_NODELETE for this object.*/
++#define DF_1_LOADFLTR	0x00000010	/* Trigger filtee loading at runtime.*/
++#define DF_1_INITFIRST	0x00000020	/* Set RTLD_INITFIRST for this object*/
++#define DF_1_NOOPEN	0x00000040	/* Set RTLD_NOOPEN for this object.  */
++#define DF_1_ORIGIN	0x00000080	/* $ORIGIN must be handled.  */
++#define DF_1_DIRECT	0x00000100	/* Direct binding enabled.  */
++#define DF_1_TRANS	0x00000200
++#define DF_1_INTERPOSE	0x00000400	/* Object is used to interpose.  */
++#define DF_1_NODEFLIB	0x00000800	/* Ignore default lib search path.  */
++#define DF_1_NODUMP	0x00001000	/* Object can't be dldump'ed.  */
++#define DF_1_CONFALT	0x00002000	/* Configuration alternative created.*/
++#define DF_1_ENDFILTEE	0x00004000	/* Filtee terminates filters search. */
++#define	DF_1_DISPRELDNE	0x00008000	/* Disp reloc applied at build time. */
++#define	DF_1_DISPRELPND	0x00010000	/* Disp reloc applied at run-time.  */
++
++/* Flags for the feature selection in DT_FEATURE_1.  */
++#define DTF_1_PARINIT	0x00000001
++#define DTF_1_CONFEXP	0x00000002
++
++/* Flags in the DT_POSFLAG_1 entry effecting only the next DT_* entry.  */
++#define DF_P1_LAZYLOAD	0x00000001	/* Lazyload following object.  */
++#define DF_P1_GROUPPERM	0x00000002	/* Symbols from next object are not
++					   generally available.  */
++
++/* Version definition sections.  */
++
++typedef struct
++{
++  Elf32_Half	vd_version;		/* Version revision */
++  Elf32_Half	vd_flags;		/* Version information */
++  Elf32_Half	vd_ndx;			/* Version Index */
++  Elf32_Half	vd_cnt;			/* Number of associated aux entries */
++  Elf32_Word	vd_hash;		/* Version name hash value */
++  Elf32_Word	vd_aux;			/* Offset in bytes to verdaux array */
++  Elf32_Word	vd_next;		/* Offset in bytes to next verdef
++					   entry */
++} Elf32_Verdef;
++
++typedef struct
++{
++  Elf64_Half	vd_version;		/* Version revision */
++  Elf64_Half	vd_flags;		/* Version information */
++  Elf64_Half	vd_ndx;			/* Version Index */
++  Elf64_Half	vd_cnt;			/* Number of associated aux entries */
++  Elf64_Word	vd_hash;		/* Version name hash value */
++  Elf64_Word	vd_aux;			/* Offset in bytes to verdaux array */
++  Elf64_Word	vd_next;		/* Offset in bytes to next verdef
++					   entry */
++} Elf64_Verdef;
++
++
++/* Legal values for vd_version (version revision).  */
++#define VER_DEF_NONE	0		/* No version */
++#define VER_DEF_CURRENT	1		/* Current version */
++#define VER_DEF_NUM	2		/* Given version number */
++
++/* Legal values for vd_flags (version information flags).  */
++#define VER_FLG_BASE	0x1		/* Version definition of file itself */
++#define VER_FLG_WEAK	0x2		/* Weak version identifier */
++
++/* Versym symbol index values.  */
++#define	VER_NDX_LOCAL		0	/* Symbol is local.  */
++#define	VER_NDX_GLOBAL		1	/* Symbol is global.  */
++#define	VER_NDX_LORESERVE	0xff00	/* Beginning of reserved entries.  */
++#define	VER_NDX_ELIMINATE	0xff01	/* Symbol is to be eliminated.  */
++
++/* Auxialiary version information.  */
++
++typedef struct
++{
++  Elf32_Word	vda_name;		/* Version or dependency names */
++  Elf32_Word	vda_next;		/* Offset in bytes to next verdaux
++					   entry */
++} Elf32_Verdaux;
++
++typedef struct
++{
++  Elf64_Word	vda_name;		/* Version or dependency names */
++  Elf64_Word	vda_next;		/* Offset in bytes to next verdaux
++					   entry */
++} Elf64_Verdaux;
++
++
++/* Version dependency section.  */
++
++typedef struct
++{
++  Elf32_Half	vn_version;		/* Version of structure */
++  Elf32_Half	vn_cnt;			/* Number of associated aux entries */
++  Elf32_Word	vn_file;		/* Offset of filename for this
++					   dependency */
++  Elf32_Word	vn_aux;			/* Offset in bytes to vernaux array */
++  Elf32_Word	vn_next;		/* Offset in bytes to next verneed
++					   entry */
++} Elf32_Verneed;
++
++typedef struct
++{
++  Elf64_Half	vn_version;		/* Version of structure */
++  Elf64_Half	vn_cnt;			/* Number of associated aux entries */
++  Elf64_Word	vn_file;		/* Offset of filename for this
++					   dependency */
++  Elf64_Word	vn_aux;			/* Offset in bytes to vernaux array */
++  Elf64_Word	vn_next;		/* Offset in bytes to next verneed
++					   entry */
++} Elf64_Verneed;
++
++
++/* Legal values for vn_version (version revision).  */
++#define VER_NEED_NONE	 0		/* No version */
++#define VER_NEED_CURRENT 1		/* Current version */
++#define VER_NEED_NUM	 2		/* Given version number */
++
++/* Auxiliary needed version information.  */
++
++typedef struct
++{
++  Elf32_Word	vna_hash;		/* Hash value of dependency name */
++  Elf32_Half	vna_flags;		/* Dependency specific information */
++  Elf32_Half	vna_other;		/* Unused */
++  Elf32_Word	vna_name;		/* Dependency name string offset */
++  Elf32_Word	vna_next;		/* Offset in bytes to next vernaux
++					   entry */
++} Elf32_Vernaux;
++
++typedef struct
++{
++  Elf64_Word	vna_hash;		/* Hash value of dependency name */
++  Elf64_Half	vna_flags;		/* Dependency specific information */
++  Elf64_Half	vna_other;		/* Unused */
++  Elf64_Word	vna_name;		/* Dependency name string offset */
++  Elf64_Word	vna_next;		/* Offset in bytes to next vernaux
++					   entry */
++} Elf64_Vernaux;
++
++
++/* Legal values for vna_flags.  */
++#define VER_FLG_WEAK	0x2		/* Weak version identifier */
++
++
++/* Auxiliary vector.  */
++
++/* This vector is normally only used by the program interpreter.  The
++   usual definition in an ABI supplement uses the name auxv_t.  The
++   vector is not usually defined in a standard <elf.h> file, but it
++   can't hurt.  We rename it to avoid conflicts.  The sizes of these
++   types are an arrangement between the exec server and the program
++   interpreter, so we don't fully specify them here.  */
++
++typedef struct
++{
++  uint32_t a_type;		/* Entry type */
++  union
++    {
++      uint32_t a_val;		/* Integer value */
++      /* We use to have pointer elements added here.  We cannot do that,
++	 though, since it does not work when using 32-bit definitions
++	 on 64-bit platforms and vice versa.  */
++    } a_un;
++} Elf32_auxv_t;
++
++typedef struct
++{
++  uint64_t a_type;		/* Entry type */
++  union
++    {
++      uint64_t a_val;		/* Integer value */
++      /* We use to have pointer elements added here.  We cannot do that,
++	 though, since it does not work when using 32-bit definitions
++	 on 64-bit platforms and vice versa.  */
++    } a_un;
++} Elf64_auxv_t;
++
++/* Legal values for a_type (entry type).  */
++
++#define AT_NULL		0		/* End of vector */
++#define AT_IGNORE	1		/* Entry should be ignored */
++#define AT_EXECFD	2		/* File descriptor of program */
++#define AT_PHDR		3		/* Program headers for program */
++#define AT_PHENT	4		/* Size of program header entry */
++#define AT_PHNUM	5		/* Number of program headers */
++#define AT_PAGESZ	6		/* System page size */
++#define AT_BASE		7		/* Base address of interpreter */
++#define AT_FLAGS	8		/* Flags */
++#define AT_ENTRY	9		/* Entry point of program */
++#define AT_NOTELF	10		/* Program is not ELF */
++#define AT_UID		11		/* Real uid */
++#define AT_EUID		12		/* Effective uid */
++#define AT_GID		13		/* Real gid */
++#define AT_EGID		14		/* Effective gid */
++#define AT_CLKTCK	17		/* Frequency of times() */
++
++/* Some more special a_type values describing the hardware.  */
++#define AT_PLATFORM	15		/* String identifying platform.  */
++#define AT_HWCAP	16		/* Machine dependent hints about
++					   processor capabilities.  */
++
++/* This entry gives some information about the FPU initialization
++   performed by the kernel.  */
++#define AT_FPUCW	18		/* Used FPU control word.  */
++
++/* Cache block sizes.  */
++#define AT_DCACHEBSIZE	19		/* Data cache block size.  */
++#define AT_ICACHEBSIZE	20		/* Instruction cache block size.  */
++#define AT_UCACHEBSIZE	21		/* Unified cache block size.  */
++
++/* A special ignored value for PPC, used by the kernel to control the
++   interpretation of the AUXV. Must be > 16.  */
++#define AT_IGNOREPPC	22		/* Entry should be ignored.  */
++
++#define	AT_SECURE	23		/* Boolean, was exec setuid-like?  */
++
++#define AT_BASE_PLATFORM 24		/* String identifying real platforms.*/
++
++#define AT_RANDOM	25		/* Address of 16 random bytes.  */
++
++#define AT_EXECFN	31		/* Filename of executable.  */
++
++/* Pointer to the global system page used for system calls and other
++   nice things.  */
++#define AT_SYSINFO	32
++#define AT_SYSINFO_EHDR	33
++
++/* Shapes of the caches.  Bits 0-3 contains associativity; bits 4-7 contains
++   log2 of line size; mask those to get cache size.  */
++#define AT_L1I_CACHESHAPE	34
++#define AT_L1D_CACHESHAPE	35
++#define AT_L2_CACHESHAPE	36
++#define AT_L3_CACHESHAPE	37
++
++/* Note section contents.  Each entry in the note section begins with
++   a header of a fixed form.  */
++
++typedef struct
++{
++  Elf32_Word n_namesz;			/* Length of the note's name.  */
++  Elf32_Word n_descsz;			/* Length of the note's descriptor.  */
++  Elf32_Word n_type;			/* Type of the note.  */
++} Elf32_Nhdr;
++
++typedef struct
++{
++  Elf64_Word n_namesz;			/* Length of the note's name.  */
++  Elf64_Word n_descsz;			/* Length of the note's descriptor.  */
++  Elf64_Word n_type;			/* Type of the note.  */
++} Elf64_Nhdr;
++
++/* Known names of notes.  */
++
++/* Solaris entries in the note section have this name.  */
++#define ELF_NOTE_SOLARIS	"SUNW Solaris"
++
++/* Note entries for GNU systems have this name.  */
++#define ELF_NOTE_GNU		"GNU"
++
++
++/* Defined types of notes for Solaris.  */
++
++/* Value of descriptor (one word) is desired pagesize for the binary.  */
++#define ELF_NOTE_PAGESIZE_HINT	1
++
++
++/* Defined note types for GNU systems.  */
++
++/* ABI information.  The descriptor consists of words:
++   word 0: OS descriptor
++   word 1: major version of the ABI
++   word 2: minor version of the ABI
++   word 3: subminor version of the ABI
++*/
++#define NT_GNU_ABI_TAG	1
++#define ELF_NOTE_ABI	NT_GNU_ABI_TAG /* Old name.  */
++
++/* Known OSes.  These values can appear in word 0 of an
++   NT_GNU_ABI_TAG note section entry.  */
++#define ELF_NOTE_OS_LINUX	0
++#define ELF_NOTE_OS_GNU		1
++#define ELF_NOTE_OS_SOLARIS2	2
++#define ELF_NOTE_OS_FREEBSD	3
++
++/* Synthetic hwcap information.  The descriptor begins with two words:
++   word 0: number of entries
++   word 1: bitmask of enabled entries
++   Then follow variable-length entries, one byte followed by a
++   '\0'-terminated hwcap name string.  The byte gives the bit
++   number to test if enabled, (1U << bit) & bitmask.  */
++#define NT_GNU_HWCAP	2
++
++/* Build ID bits as generated by ld --build-id.
++   The descriptor consists of any nonzero number of bytes.  */
++#define NT_GNU_BUILD_ID	3
++
++/* Version note generated by GNU gold containing a version string.  */
++#define NT_GNU_GOLD_VERSION	4
++
++
++/* Move records.  */
++typedef struct
++{
++  Elf32_Xword m_value;		/* Symbol value.  */
++  Elf32_Word m_info;		/* Size and index.  */
++  Elf32_Word m_poffset;		/* Symbol offset.  */
++  Elf32_Half m_repeat;		/* Repeat count.  */
++  Elf32_Half m_stride;		/* Stride info.  */
++} Elf32_Move;
++
++typedef struct
++{
++  Elf64_Xword m_value;		/* Symbol value.  */
++  Elf64_Xword m_info;		/* Size and index.  */
++  Elf64_Xword m_poffset;	/* Symbol offset.  */
++  Elf64_Half m_repeat;		/* Repeat count.  */
++  Elf64_Half m_stride;		/* Stride info.  */
++} Elf64_Move;
++
++/* Macro to construct move records.  */
++#define ELF32_M_SYM(info)	((info) >> 8)
++#define ELF32_M_SIZE(info)	((unsigned char) (info))
++#define ELF32_M_INFO(sym, size)	(((sym) << 8) + (unsigned char) (size))
++
++#define ELF64_M_SYM(info)	ELF32_M_SYM (info)
++#define ELF64_M_SIZE(info)	ELF32_M_SIZE (info)
++#define ELF64_M_INFO(sym, size)	ELF32_M_INFO (sym, size)
++
++
++/* Motorola 68k specific definitions.  */
++
++/* Values for Elf32_Ehdr.e_flags.  */
++#define EF_CPU32	0x00810000
++
++/* m68k relocs.  */
++
++#define R_68K_NONE	0		/* No reloc */
++#define R_68K_32	1		/* Direct 32 bit  */
++#define R_68K_16	2		/* Direct 16 bit  */
++#define R_68K_8		3		/* Direct 8 bit  */
++#define R_68K_PC32	4		/* PC relative 32 bit */
++#define R_68K_PC16	5		/* PC relative 16 bit */
++#define R_68K_PC8	6		/* PC relative 8 bit */
++#define R_68K_GOT32	7		/* 32 bit PC relative GOT entry */
++#define R_68K_GOT16	8		/* 16 bit PC relative GOT entry */
++#define R_68K_GOT8	9		/* 8 bit PC relative GOT entry */
++#define R_68K_GOT32O	10		/* 32 bit GOT offset */
++#define R_68K_GOT16O	11		/* 16 bit GOT offset */
++#define R_68K_GOT8O	12		/* 8 bit GOT offset */
++#define R_68K_PLT32	13		/* 32 bit PC relative PLT address */
++#define R_68K_PLT16	14		/* 16 bit PC relative PLT address */
++#define R_68K_PLT8	15		/* 8 bit PC relative PLT address */
++#define R_68K_PLT32O	16		/* 32 bit PLT offset */
++#define R_68K_PLT16O	17		/* 16 bit PLT offset */
++#define R_68K_PLT8O	18		/* 8 bit PLT offset */
++#define R_68K_COPY	19		/* Copy symbol at runtime */
++#define R_68K_GLOB_DAT	20		/* Create GOT entry */
++#define R_68K_JMP_SLOT	21		/* Create PLT entry */
++#define R_68K_RELATIVE	22		/* Adjust by program base */
++#define R_68K_TLS_GD32      25          /* 32 bit GOT offset for GD */
++#define R_68K_TLS_GD16      26          /* 16 bit GOT offset for GD */
++#define R_68K_TLS_GD8       27          /* 8 bit GOT offset for GD */
++#define R_68K_TLS_LDM32     28          /* 32 bit GOT offset for LDM */
++#define R_68K_TLS_LDM16     29          /* 16 bit GOT offset for LDM */
++#define R_68K_TLS_LDM8      30          /* 8 bit GOT offset for LDM */
++#define R_68K_TLS_LDO32     31          /* 32 bit module-relative offset */
++#define R_68K_TLS_LDO16     32          /* 16 bit module-relative offset */
++#define R_68K_TLS_LDO8      33          /* 8 bit module-relative offset */
++#define R_68K_TLS_IE32      34          /* 32 bit GOT offset for IE */
++#define R_68K_TLS_IE16      35          /* 16 bit GOT offset for IE */
++#define R_68K_TLS_IE8       36          /* 8 bit GOT offset for IE */
++#define R_68K_TLS_LE32      37          /* 32 bit offset relative to
++					   static TLS block */
++#define R_68K_TLS_LE16      38          /* 16 bit offset relative to
++					   static TLS block */
++#define R_68K_TLS_LE8       39          /* 8 bit offset relative to
++					   static TLS block */
++#define R_68K_TLS_DTPMOD32  40          /* 32 bit module number */
++#define R_68K_TLS_DTPREL32  41          /* 32 bit module-relative offset */
++#define R_68K_TLS_TPREL32   42          /* 32 bit TP-relative offset */
++/* Keep this the last entry.  */
++#define R_68K_NUM	43
++
++/* Intel 80386 specific definitions.  */
++
++/* i386 relocs.  */
++
++#define R_386_NONE	   0		/* No reloc */
++#define R_386_32	   1		/* Direct 32 bit  */
++#define R_386_PC32	   2		/* PC relative 32 bit */
++#define R_386_GOT32	   3		/* 32 bit GOT entry */
++#define R_386_PLT32	   4		/* 32 bit PLT address */
++#define R_386_COPY	   5		/* Copy symbol at runtime */
++#define R_386_GLOB_DAT	   6		/* Create GOT entry */
++#define R_386_JMP_SLOT	   7		/* Create PLT entry */
++#define R_386_RELATIVE	   8		/* Adjust by program base */
++#define R_386_GOTOFF	   9		/* 32 bit offset to GOT */
++#define R_386_GOTPC	   10		/* 32 bit PC relative offset to GOT */
++#define R_386_32PLT	   11
++#define R_386_TLS_TPOFF	   14		/* Offset in static TLS block */
++#define R_386_TLS_IE	   15		/* Address of GOT entry for static TLS
++					   block offset */
++#define R_386_TLS_GOTIE	   16		/* GOT entry for static TLS block
++					   offset */
++#define R_386_TLS_LE	   17		/* Offset relative to static TLS
++					   block */
++#define R_386_TLS_GD	   18		/* Direct 32 bit for GNU version of
++					   general dynamic thread local data */
++#define R_386_TLS_LDM	   19		/* Direct 32 bit for GNU version of
++					   local dynamic thread local data
++					   in LE code */
++#define R_386_16	   20
++#define R_386_PC16	   21
++#define R_386_8		   22
++#define R_386_PC8	   23
++#define R_386_TLS_GD_32	   24		/* Direct 32 bit for general dynamic
++					   thread local data */
++#define R_386_TLS_GD_PUSH  25		/* Tag for pushl in GD TLS code */
++#define R_386_TLS_GD_CALL  26		/* Relocation for call to
++					   __tls_get_addr() */
++#define R_386_TLS_GD_POP   27		/* Tag for popl in GD TLS code */
++#define R_386_TLS_LDM_32   28		/* Direct 32 bit for local dynamic
++					   thread local data in LE code */
++#define R_386_TLS_LDM_PUSH 29		/* Tag for pushl in LDM TLS code */
++#define R_386_TLS_LDM_CALL 30		/* Relocation for call to
++					   __tls_get_addr() in LDM code */
++#define R_386_TLS_LDM_POP  31		/* Tag for popl in LDM TLS code */
++#define R_386_TLS_LDO_32   32		/* Offset relative to TLS block */
++#define R_386_TLS_IE_32	   33		/* GOT entry for negated static TLS
++					   block offset */
++#define R_386_TLS_LE_32	   34		/* Negated offset relative to static
++					   TLS block */
++#define R_386_TLS_DTPMOD32 35		/* ID of module containing symbol */
++#define R_386_TLS_DTPOFF32 36		/* Offset in TLS block */
++#define R_386_TLS_TPOFF32  37		/* Negated offset in static TLS block */
++/* 38? */
++#define R_386_TLS_GOTDESC  39		/* GOT offset for TLS descriptor.  */
++#define R_386_TLS_DESC_CALL 40		/* Marker of call through TLS
++					   descriptor for
++					   relaxation.  */
++#define R_386_TLS_DESC     41		/* TLS descriptor containing
++					   pointer to code and to
++					   argument, returning the TLS
++					   offset for the symbol.  */
++#define R_386_IRELATIVE	   42		/* Adjust indirectly by program base */
++/* Keep this the last entry.  */
++#define R_386_NUM	   43
++
++/* SUN SPARC specific definitions.  */
++
++/* Legal values for ST_TYPE subfield of st_info (symbol type).  */
++
++#define STT_SPARC_REGISTER	13	/* Global register reserved to app. */
++
++/* Values for Elf64_Ehdr.e_flags.  */
++
++#define EF_SPARCV9_MM		3
++#define EF_SPARCV9_TSO		0
++#define EF_SPARCV9_PSO		1
++#define EF_SPARCV9_RMO		2
++#define EF_SPARC_LEDATA		0x800000 /* little endian data */
++#define EF_SPARC_EXT_MASK	0xFFFF00
++#define EF_SPARC_32PLUS		0x000100 /* generic V8+ features */
++#define EF_SPARC_SUN_US1	0x000200 /* Sun UltraSPARC1 extensions */
++#define EF_SPARC_HAL_R1		0x000400 /* HAL R1 extensions */
++#define EF_SPARC_SUN_US3	0x000800 /* Sun UltraSPARCIII extensions */
++
++/* SPARC relocs.  */
++
++#define R_SPARC_NONE		0	/* No reloc */
++#define R_SPARC_8		1	/* Direct 8 bit */
++#define R_SPARC_16		2	/* Direct 16 bit */
++#define R_SPARC_32		3	/* Direct 32 bit */
++#define R_SPARC_DISP8		4	/* PC relative 8 bit */
++#define R_SPARC_DISP16		5	/* PC relative 16 bit */
++#define R_SPARC_DISP32		6	/* PC relative 32 bit */
++#define R_SPARC_WDISP30		7	/* PC relative 30 bit shifted */
++#define R_SPARC_WDISP22		8	/* PC relative 22 bit shifted */
++#define R_SPARC_HI22		9	/* High 22 bit */
++#define R_SPARC_22		10	/* Direct 22 bit */
++#define R_SPARC_13		11	/* Direct 13 bit */
++#define R_SPARC_LO10		12	/* Truncated 10 bit */
++#define R_SPARC_GOT10		13	/* Truncated 10 bit GOT entry */
++#define R_SPARC_GOT13		14	/* 13 bit GOT entry */
++#define R_SPARC_GOT22		15	/* 22 bit GOT entry shifted */
++#define R_SPARC_PC10		16	/* PC relative 10 bit truncated */
++#define R_SPARC_PC22		17	/* PC relative 22 bit shifted */
++#define R_SPARC_WPLT30		18	/* 30 bit PC relative PLT address */
++#define R_SPARC_COPY		19	/* Copy symbol at runtime */
++#define R_SPARC_GLOB_DAT	20	/* Create GOT entry */
++#define R_SPARC_JMP_SLOT	21	/* Create PLT entry */
++#define R_SPARC_RELATIVE	22	/* Adjust by program base */
++#define R_SPARC_UA32		23	/* Direct 32 bit unaligned */
++
++/* Additional Sparc64 relocs.  */
++
++#define R_SPARC_PLT32		24	/* Direct 32 bit ref to PLT entry */
++#define R_SPARC_HIPLT22		25	/* High 22 bit PLT entry */
++#define R_SPARC_LOPLT10		26	/* Truncated 10 bit PLT entry */
++#define R_SPARC_PCPLT32		27	/* PC rel 32 bit ref to PLT entry */
++#define R_SPARC_PCPLT22		28	/* PC rel high 22 bit PLT entry */
++#define R_SPARC_PCPLT10		29	/* PC rel trunc 10 bit PLT entry */
++#define R_SPARC_10		30	/* Direct 10 bit */
++#define R_SPARC_11		31	/* Direct 11 bit */
++#define R_SPARC_64		32	/* Direct 64 bit */
++#define R_SPARC_OLO10		33	/* 10bit with secondary 13bit addend */
++#define R_SPARC_HH22		34	/* Top 22 bits of direct 64 bit */
++#define R_SPARC_HM10		35	/* High middle 10 bits of ... */
++#define R_SPARC_LM22		36	/* Low middle 22 bits of ... */
++#define R_SPARC_PC_HH22		37	/* Top 22 bits of pc rel 64 bit */
++#define R_SPARC_PC_HM10		38	/* High middle 10 bit of ... */
++#define R_SPARC_PC_LM22		39	/* Low miggle 22 bits of ... */
++#define R_SPARC_WDISP16		40	/* PC relative 16 bit shifted */
++#define R_SPARC_WDISP19		41	/* PC relative 19 bit shifted */
++#define R_SPARC_GLOB_JMP	42	/* was part of v9 ABI but was removed */
++#define R_SPARC_7		43	/* Direct 7 bit */
++#define R_SPARC_5		44	/* Direct 5 bit */
++#define R_SPARC_6		45	/* Direct 6 bit */
++#define R_SPARC_DISP64		46	/* PC relative 64 bit */
++#define R_SPARC_PLT64		47	/* Direct 64 bit ref to PLT entry */
++#define R_SPARC_HIX22		48	/* High 22 bit complemented */
++#define R_SPARC_LOX10		49	/* Truncated 11 bit complemented */
++#define R_SPARC_H44		50	/* Direct high 12 of 44 bit */
++#define R_SPARC_M44		51	/* Direct mid 22 of 44 bit */
++#define R_SPARC_L44		52	/* Direct low 10 of 44 bit */
++#define R_SPARC_REGISTER	53	/* Global register usage */
++#define R_SPARC_UA64		54	/* Direct 64 bit unaligned */
++#define R_SPARC_UA16		55	/* Direct 16 bit unaligned */
++#define R_SPARC_TLS_GD_HI22	56
++#define R_SPARC_TLS_GD_LO10	57
++#define R_SPARC_TLS_GD_ADD	58
++#define R_SPARC_TLS_GD_CALL	59
++#define R_SPARC_TLS_LDM_HI22	60
++#define R_SPARC_TLS_LDM_LO10	61
++#define R_SPARC_TLS_LDM_ADD	62
++#define R_SPARC_TLS_LDM_CALL	63
++#define R_SPARC_TLS_LDO_HIX22	64
++#define R_SPARC_TLS_LDO_LOX10	65
++#define R_SPARC_TLS_LDO_ADD	66
++#define R_SPARC_TLS_IE_HI22	67
++#define R_SPARC_TLS_IE_LO10	68
++#define R_SPARC_TLS_IE_LD	69
++#define R_SPARC_TLS_IE_LDX	70
++#define R_SPARC_TLS_IE_ADD	71
++#define R_SPARC_TLS_LE_HIX22	72
++#define R_SPARC_TLS_LE_LOX10	73
++#define R_SPARC_TLS_DTPMOD32	74
++#define R_SPARC_TLS_DTPMOD64	75
++#define R_SPARC_TLS_DTPOFF32	76
++#define R_SPARC_TLS_DTPOFF64	77
++#define R_SPARC_TLS_TPOFF32	78
++#define R_SPARC_TLS_TPOFF64	79
++#define R_SPARC_GOTDATA_HIX22	80
++#define R_SPARC_GOTDATA_LOX10	81
++#define R_SPARC_GOTDATA_OP_HIX22	82
++#define R_SPARC_GOTDATA_OP_LOX10	83
++#define R_SPARC_GOTDATA_OP	84
++#define R_SPARC_H34		85
++#define R_SPARC_SIZE32		86
++#define R_SPARC_SIZE64		87
++#define R_SPARC_WDISP10		88
++#define R_SPARC_JMP_IREL	248
++#define R_SPARC_IRELATIVE	249
++#define R_SPARC_GNU_VTINHERIT	250
++#define R_SPARC_GNU_VTENTRY	251
++#define R_SPARC_REV32		252
++/* Keep this the last entry.  */
++#define R_SPARC_NUM		253
++
++/* For Sparc64, legal values for d_tag of Elf64_Dyn.  */
++
++#define DT_SPARC_REGISTER 0x70000001
++#define DT_SPARC_NUM	2
++
++/* MIPS R3000 specific definitions.  */
++
++/* Legal values for e_flags field of Elf32_Ehdr.  */
++
++#define EF_MIPS_NOREORDER   1		/* A .noreorder directive was used */
++#define EF_MIPS_PIC	    2		/* Contains PIC code */
++#define EF_MIPS_CPIC	    4		/* Uses PIC calling sequence */
++#define EF_MIPS_XGOT	    8
++#define EF_MIPS_64BIT_WHIRL 16
++#define EF_MIPS_ABI2	    32
++#define EF_MIPS_ABI_ON32    64
++#define EF_MIPS_ARCH	    0xf0000000	/* MIPS architecture level */
++
++/* Legal values for MIPS architecture level.  */
++
++#define EF_MIPS_ARCH_1	    0x00000000	/* -mips1 code.  */
++#define EF_MIPS_ARCH_2	    0x10000000	/* -mips2 code.  */
++#define EF_MIPS_ARCH_3	    0x20000000	/* -mips3 code.  */
++#define EF_MIPS_ARCH_4	    0x30000000	/* -mips4 code.  */
++#define EF_MIPS_ARCH_5	    0x40000000	/* -mips5 code.  */
++#define EF_MIPS_ARCH_32	    0x60000000	/* MIPS32 code.  */
++#define EF_MIPS_ARCH_64	    0x70000000	/* MIPS64 code.  */
++
++/* The following are non-official names and should not be used.  */
++
++#define E_MIPS_ARCH_1	  0x00000000	/* -mips1 code.  */
++#define E_MIPS_ARCH_2	  0x10000000	/* -mips2 code.  */
++#define E_MIPS_ARCH_3	  0x20000000	/* -mips3 code.  */
++#define E_MIPS_ARCH_4	  0x30000000	/* -mips4 code.  */
++#define E_MIPS_ARCH_5	  0x40000000	/* -mips5 code.  */
++#define E_MIPS_ARCH_32	  0x60000000	/* MIPS32 code.  */
++#define E_MIPS_ARCH_64	  0x70000000	/* MIPS64 code.  */
++
++/* Special section indices.  */
++
++#define SHN_MIPS_ACOMMON    0xff00	/* Allocated common symbols */
++#define SHN_MIPS_TEXT	    0xff01	/* Allocated test symbols.  */
++#define SHN_MIPS_DATA	    0xff02	/* Allocated data symbols.  */
++#define SHN_MIPS_SCOMMON    0xff03	/* Small common symbols */
++#define SHN_MIPS_SUNDEFINED 0xff04	/* Small undefined symbols */
++
++/* Legal values for sh_type field of Elf32_Shdr.  */
++
++#define SHT_MIPS_LIBLIST       0x70000000 /* Shared objects used in link */
++#define SHT_MIPS_MSYM	       0x70000001
++#define SHT_MIPS_CONFLICT      0x70000002 /* Conflicting symbols */
++#define SHT_MIPS_GPTAB	       0x70000003 /* Global data area sizes */
++#define SHT_MIPS_UCODE	       0x70000004 /* Reserved for SGI/MIPS compilers */
++#define SHT_MIPS_DEBUG	       0x70000005 /* MIPS ECOFF debugging information*/
++#define SHT_MIPS_REGINFO       0x70000006 /* Register usage information */
++#define SHT_MIPS_PACKAGE       0x70000007
++#define SHT_MIPS_PACKSYM       0x70000008
++#define SHT_MIPS_RELD	       0x70000009
++#define SHT_MIPS_IFACE         0x7000000b
++#define SHT_MIPS_CONTENT       0x7000000c
++#define SHT_MIPS_OPTIONS       0x7000000d /* Miscellaneous options.  */
++#define SHT_MIPS_SHDR	       0x70000010
++#define SHT_MIPS_FDESC	       0x70000011
++#define SHT_MIPS_EXTSYM	       0x70000012
++#define SHT_MIPS_DENSE	       0x70000013
++#define SHT_MIPS_PDESC	       0x70000014
++#define SHT_MIPS_LOCSYM	       0x70000015
++#define SHT_MIPS_AUXSYM	       0x70000016
++#define SHT_MIPS_OPTSYM	       0x70000017
++#define SHT_MIPS_LOCSTR	       0x70000018
++#define SHT_MIPS_LINE	       0x70000019
++#define SHT_MIPS_RFDESC	       0x7000001a
++#define SHT_MIPS_DELTASYM      0x7000001b
++#define SHT_MIPS_DELTAINST     0x7000001c
++#define SHT_MIPS_DELTACLASS    0x7000001d
++#define SHT_MIPS_DWARF         0x7000001e /* DWARF debugging information.  */
++#define SHT_MIPS_DELTADECL     0x7000001f
++#define SHT_MIPS_SYMBOL_LIB    0x70000020
++#define SHT_MIPS_EVENTS	       0x70000021 /* Event section.  */
++#define SHT_MIPS_TRANSLATE     0x70000022
++#define SHT_MIPS_PIXIE	       0x70000023
++#define SHT_MIPS_XLATE	       0x70000024
++#define SHT_MIPS_XLATE_DEBUG   0x70000025
++#define SHT_MIPS_WHIRL	       0x70000026
++#define SHT_MIPS_EH_REGION     0x70000027
++#define SHT_MIPS_XLATE_OLD     0x70000028
++#define SHT_MIPS_PDR_EXCEPTION 0x70000029
++
++/* Legal values for sh_flags field of Elf32_Shdr.  */
++
++#define SHF_MIPS_GPREL	 0x10000000	/* Must be part of global data area */
++#define SHF_MIPS_MERGE	 0x20000000
++#define SHF_MIPS_ADDR	 0x40000000
++#define SHF_MIPS_STRINGS 0x80000000
++#define SHF_MIPS_NOSTRIP 0x08000000
++#define SHF_MIPS_LOCAL	 0x04000000
++#define SHF_MIPS_NAMES	 0x02000000
++#define SHF_MIPS_NODUPE	 0x01000000
++
++
++/* Symbol tables.  */
++
++/* MIPS specific values for `st_other'.  */
++#define STO_MIPS_DEFAULT		0x0
++#define STO_MIPS_INTERNAL		0x1
++#define STO_MIPS_HIDDEN			0x2
++#define STO_MIPS_PROTECTED		0x3
++#define STO_MIPS_PLT			0x8
++#define STO_MIPS_SC_ALIGN_UNUSED	0xff
++
++/* MIPS specific values for `st_info'.  */
++#define STB_MIPS_SPLIT_COMMON		13
++
++/* Entries found in sections of type SHT_MIPS_GPTAB.  */
++
++typedef union
++{
++  struct
++    {
++      Elf32_Word gt_current_g_value;	/* -G value used for compilation */
++      Elf32_Word gt_unused;		/* Not used */
++    } gt_header;			/* First entry in section */
++  struct
++    {
++      Elf32_Word gt_g_value;		/* If this value were used for -G */
++      Elf32_Word gt_bytes;		/* This many bytes would be used */
++    } gt_entry;				/* Subsequent entries in section */
++} Elf32_gptab;
++
++/* Entry found in sections of type SHT_MIPS_REGINFO.  */
++
++typedef struct
++{
++  Elf32_Word	ri_gprmask;		/* General registers used */
++  Elf32_Word	ri_cprmask[4];		/* Coprocessor registers used */
++  Elf32_Sword	ri_gp_value;		/* $gp register value */
++} Elf32_RegInfo;
++
++/* Entries found in sections of type SHT_MIPS_OPTIONS.  */
++
++typedef struct
++{
++  unsigned char kind;		/* Determines interpretation of the
++				   variable part of descriptor.  */
++  unsigned char size;		/* Size of descriptor, including header.  */
++  Elf32_Section section;	/* Section header index of section affected,
++				   0 for global options.  */
++  Elf32_Word info;		/* Kind-specific information.  */
++} Elf_Options;
++
++/* Values for `kind' field in Elf_Options.  */
++
++#define ODK_NULL	0	/* Undefined.  */
++#define ODK_REGINFO	1	/* Register usage information.  */
++#define ODK_EXCEPTIONS	2	/* Exception processing options.  */
++#define ODK_PAD		3	/* Section padding options.  */
++#define ODK_HWPATCH	4	/* Hardware workarounds performed */
++#define ODK_FILL	5	/* record the fill value used by the linker. */
++#define ODK_TAGS	6	/* reserve space for desktop tools to write. */
++#define ODK_HWAND	7	/* HW workarounds.  'AND' bits when merging. */
++#define ODK_HWOR	8	/* HW workarounds.  'OR' bits when merging.  */
++
++/* Values for `info' in Elf_Options for ODK_EXCEPTIONS entries.  */
++
++#define OEX_FPU_MIN	0x1f	/* FPE's which MUST be enabled.  */
++#define OEX_FPU_MAX	0x1f00	/* FPE's which MAY be enabled.  */
++#define OEX_PAGE0	0x10000	/* page zero must be mapped.  */
++#define OEX_SMM		0x20000	/* Force sequential memory mode?  */
++#define OEX_FPDBUG	0x40000	/* Force floating point debug mode?  */
++#define OEX_PRECISEFP	OEX_FPDBUG
++#define OEX_DISMISS	0x80000	/* Dismiss invalid address faults?  */
++
++#define OEX_FPU_INVAL	0x10
++#define OEX_FPU_DIV0	0x08
++#define OEX_FPU_OFLO	0x04
++#define OEX_FPU_UFLO	0x02
++#define OEX_FPU_INEX	0x01
++
++/* Masks for `info' in Elf_Options for an ODK_HWPATCH entry.  */
++
++#define OHW_R4KEOP	0x1	/* R4000 end-of-page patch.  */
++#define OHW_R8KPFETCH	0x2	/* may need R8000 prefetch patch.  */
++#define OHW_R5KEOP	0x4	/* R5000 end-of-page patch.  */
++#define OHW_R5KCVTL	0x8	/* R5000 cvt.[ds].l bug.  clean=1.  */
++
++#define OPAD_PREFIX	0x1
++#define OPAD_POSTFIX	0x2
++#define OPAD_SYMBOL	0x4
++
++/* Entry found in `.options' section.  */
++
++typedef struct
++{
++  Elf32_Word hwp_flags1;	/* Extra flags.  */
++  Elf32_Word hwp_flags2;	/* Extra flags.  */
++} Elf_Options_Hw;
++
++/* Masks for `info' in ElfOptions for ODK_HWAND and ODK_HWOR entries.  */
++
++#define OHWA0_R4KEOP_CHECKED	0x00000001
++#define OHWA1_R4KEOP_CLEAN	0x00000002
++
++/* MIPS relocs.  */
++
++#define R_MIPS_NONE		0	/* No reloc */
++#define R_MIPS_16		1	/* Direct 16 bit */
++#define R_MIPS_32		2	/* Direct 32 bit */
++#define R_MIPS_REL32		3	/* PC relative 32 bit */
++#define R_MIPS_26		4	/* Direct 26 bit shifted */
++#define R_MIPS_HI16		5	/* High 16 bit */
++#define R_MIPS_LO16		6	/* Low 16 bit */
++#define R_MIPS_GPREL16		7	/* GP relative 16 bit */
++#define R_MIPS_LITERAL		8	/* 16 bit literal entry */
++#define R_MIPS_GOT16		9	/* 16 bit GOT entry */
++#define R_MIPS_PC16		10	/* PC relative 16 bit */
++#define R_MIPS_CALL16		11	/* 16 bit GOT entry for function */
++#define R_MIPS_GPREL32		12	/* GP relative 32 bit */
++
++#define R_MIPS_SHIFT5		16
++#define R_MIPS_SHIFT6		17
++#define R_MIPS_64		18
++#define R_MIPS_GOT_DISP		19
++#define R_MIPS_GOT_PAGE		20
++#define R_MIPS_GOT_OFST		21
++#define R_MIPS_GOT_HI16		22
++#define R_MIPS_GOT_LO16		23
++#define R_MIPS_SUB		24
++#define R_MIPS_INSERT_A		25
++#define R_MIPS_INSERT_B		26
++#define R_MIPS_DELETE		27
++#define R_MIPS_HIGHER		28
++#define R_MIPS_HIGHEST		29
++#define R_MIPS_CALL_HI16	30
++#define R_MIPS_CALL_LO16	31
++#define R_MIPS_SCN_DISP		32
++#define R_MIPS_REL16		33
++#define R_MIPS_ADD_IMMEDIATE	34
++#define R_MIPS_PJUMP		35
++#define R_MIPS_RELGOT		36
++#define R_MIPS_JALR		37
++#define R_MIPS_TLS_DTPMOD32	38	/* Module number 32 bit */
++#define R_MIPS_TLS_DTPREL32	39	/* Module-relative offset 32 bit */
++#define R_MIPS_TLS_DTPMOD64	40	/* Module number 64 bit */
++#define R_MIPS_TLS_DTPREL64	41	/* Module-relative offset 64 bit */
++#define R_MIPS_TLS_GD		42	/* 16 bit GOT offset for GD */
++#define R_MIPS_TLS_LDM		43	/* 16 bit GOT offset for LDM */
++#define R_MIPS_TLS_DTPREL_HI16	44	/* Module-relative offset, high 16 bits */
++#define R_MIPS_TLS_DTPREL_LO16	45	/* Module-relative offset, low 16 bits */
++#define R_MIPS_TLS_GOTTPREL	46	/* 16 bit GOT offset for IE */
++#define R_MIPS_TLS_TPREL32	47	/* TP-relative offset, 32 bit */
++#define R_MIPS_TLS_TPREL64	48	/* TP-relative offset, 64 bit */
++#define R_MIPS_TLS_TPREL_HI16	49	/* TP-relative offset, high 16 bits */
++#define R_MIPS_TLS_TPREL_LO16	50	/* TP-relative offset, low 16 bits */
++#define R_MIPS_GLOB_DAT		51
++#define R_MIPS_COPY		126
++#define R_MIPS_JUMP_SLOT        127
++/* Keep this the last entry.  */
++#define R_MIPS_NUM		128
++
++/* Legal values for p_type field of Elf32_Phdr.  */
++
++#define PT_MIPS_REGINFO	0x70000000	/* Register usage information */
++#define PT_MIPS_RTPROC  0x70000001	/* Runtime procedure table. */
++#define PT_MIPS_OPTIONS 0x70000002
++
++/* Special program header types.  */
++
++#define PF_MIPS_LOCAL	0x10000000
++
++/* Legal values for d_tag field of Elf32_Dyn.  */
++
++#define DT_MIPS_RLD_VERSION  0x70000001	/* Runtime linker interface version */
++#define DT_MIPS_TIME_STAMP   0x70000002	/* Timestamp */
++#define DT_MIPS_ICHECKSUM    0x70000003	/* Checksum */
++#define DT_MIPS_IVERSION     0x70000004	/* Version string (string tbl index) */
++#define DT_MIPS_FLAGS	     0x70000005	/* Flags */
++#define DT_MIPS_BASE_ADDRESS 0x70000006	/* Base address */
++#define DT_MIPS_MSYM	     0x70000007
++#define DT_MIPS_CONFLICT     0x70000008	/* Address of CONFLICT section */
++#define DT_MIPS_LIBLIST	     0x70000009	/* Address of LIBLIST section */
++#define DT_MIPS_LOCAL_GOTNO  0x7000000a	/* Number of local GOT entries */
++#define DT_MIPS_CONFLICTNO   0x7000000b	/* Number of CONFLICT entries */
++#define DT_MIPS_LIBLISTNO    0x70000010	/* Number of LIBLIST entries */
++#define DT_MIPS_SYMTABNO     0x70000011	/* Number of DYNSYM entries */
++#define DT_MIPS_UNREFEXTNO   0x70000012	/* First external DYNSYM */
++#define DT_MIPS_GOTSYM	     0x70000013	/* First GOT entry in DYNSYM */
++#define DT_MIPS_HIPAGENO     0x70000014	/* Number of GOT page table entries */
++#define DT_MIPS_RLD_MAP	     0x70000016	/* Address of run time loader map.  */
++#define DT_MIPS_DELTA_CLASS  0x70000017	/* Delta C++ class definition.  */
++#define DT_MIPS_DELTA_CLASS_NO    0x70000018 /* Number of entries in
++						DT_MIPS_DELTA_CLASS.  */
++#define DT_MIPS_DELTA_INSTANCE    0x70000019 /* Delta C++ class instances.  */
++#define DT_MIPS_DELTA_INSTANCE_NO 0x7000001a /* Number of entries in
++						DT_MIPS_DELTA_INSTANCE.  */
++#define DT_MIPS_DELTA_RELOC  0x7000001b /* Delta relocations.  */
++#define DT_MIPS_DELTA_RELOC_NO 0x7000001c /* Number of entries in
++					     DT_MIPS_DELTA_RELOC.  */
++#define DT_MIPS_DELTA_SYM    0x7000001d /* Delta symbols that Delta
++					   relocations refer to.  */
++#define DT_MIPS_DELTA_SYM_NO 0x7000001e /* Number of entries in
++					   DT_MIPS_DELTA_SYM.  */
++#define DT_MIPS_DELTA_CLASSSYM 0x70000020 /* Delta symbols that hold the
++					     class declaration.  */
++#define DT_MIPS_DELTA_CLASSSYM_NO 0x70000021 /* Number of entries in
++						DT_MIPS_DELTA_CLASSSYM.  */
++#define DT_MIPS_CXX_FLAGS    0x70000022 /* Flags indicating for C++ flavor.  */
++#define DT_MIPS_PIXIE_INIT   0x70000023
++#define DT_MIPS_SYMBOL_LIB   0x70000024
++#define DT_MIPS_LOCALPAGE_GOTIDX 0x70000025
++#define DT_MIPS_LOCAL_GOTIDX 0x70000026
++#define DT_MIPS_HIDDEN_GOTIDX 0x70000027
++#define DT_MIPS_PROTECTED_GOTIDX 0x70000028
++#define DT_MIPS_OPTIONS	     0x70000029 /* Address of .options.  */
++#define DT_MIPS_INTERFACE    0x7000002a /* Address of .interface.  */
++#define DT_MIPS_DYNSTR_ALIGN 0x7000002b
++#define DT_MIPS_INTERFACE_SIZE 0x7000002c /* Size of the .interface section. */
++#define DT_MIPS_RLD_TEXT_RESOLVE_ADDR 0x7000002d /* Address of rld_text_rsolve
++						    function stored in GOT.  */
++#define DT_MIPS_PERF_SUFFIX  0x7000002e /* Default suffix of dso to be added
++					   by rld on dlopen() calls.  */
++#define DT_MIPS_COMPACT_SIZE 0x7000002f /* (O32)Size of compact rel section. */
++#define DT_MIPS_GP_VALUE     0x70000030 /* GP value for aux GOTs.  */
++#define DT_MIPS_AUX_DYNAMIC  0x70000031 /* Address of aux .dynamic.  */
++/* The address of .got.plt in an executable using the new non-PIC ABI.  */
++#define DT_MIPS_PLTGOT	     0x70000032
++/* The base of the PLT in an executable using the new non-PIC ABI if that
++   PLT is writable.  For a non-writable PLT, this is omitted or has a zero
++   value.  */
++#define DT_MIPS_RWPLT        0x70000034
++#define DT_MIPS_NUM	     0x35
++
++/* Legal values for DT_MIPS_FLAGS Elf32_Dyn entry.  */
++
++#define RHF_NONE		   0		/* No flags */
++#define RHF_QUICKSTART		   (1 << 0)	/* Use quickstart */
++#define RHF_NOTPOT		   (1 << 1)	/* Hash size not power of 2 */
++#define RHF_NO_LIBRARY_REPLACEMENT (1 << 2)	/* Ignore LD_LIBRARY_PATH */
++#define RHF_NO_MOVE		   (1 << 3)
++#define RHF_SGI_ONLY		   (1 << 4)
++#define RHF_GUARANTEE_INIT	   (1 << 5)
++#define RHF_DELTA_C_PLUS_PLUS	   (1 << 6)
++#define RHF_GUARANTEE_START_INIT   (1 << 7)
++#define RHF_PIXIE		   (1 << 8)
++#define RHF_DEFAULT_DELAY_LOAD	   (1 << 9)
++#define RHF_REQUICKSTART	   (1 << 10)
++#define RHF_REQUICKSTARTED	   (1 << 11)
++#define RHF_CORD		   (1 << 12)
++#define RHF_NO_UNRES_UNDEF	   (1 << 13)
++#define RHF_RLD_ORDER_SAFE	   (1 << 14)
++
++/* Entries found in sections of type SHT_MIPS_LIBLIST.  */
++
++typedef struct
++{
++  Elf32_Word l_name;		/* Name (string table index) */
++  Elf32_Word l_time_stamp;	/* Timestamp */
++  Elf32_Word l_checksum;	/* Checksum */
++  Elf32_Word l_version;		/* Interface version */
++  Elf32_Word l_flags;		/* Flags */
++} Elf32_Lib;
++
++typedef struct
++{
++  Elf64_Word l_name;		/* Name (string table index) */
++  Elf64_Word l_time_stamp;	/* Timestamp */
++  Elf64_Word l_checksum;	/* Checksum */
++  Elf64_Word l_version;		/* Interface version */
++  Elf64_Word l_flags;		/* Flags */
++} Elf64_Lib;
++
++
++/* Legal values for l_flags.  */
++
++#define LL_NONE		  0
++#define LL_EXACT_MATCH	  (1 << 0)	/* Require exact match */
++#define LL_IGNORE_INT_VER (1 << 1)	/* Ignore interface version */
++#define LL_REQUIRE_MINOR  (1 << 2)
++#define LL_EXPORTS	  (1 << 3)
++#define LL_DELAY_LOAD	  (1 << 4)
++#define LL_DELTA	  (1 << 5)
++
++/* Entries found in sections of type SHT_MIPS_CONFLICT.  */
++
++typedef Elf32_Addr Elf32_Conflict;
++
++
++/* HPPA specific definitions.  */
++
++/* Legal values for e_flags field of Elf32_Ehdr.  */
++
++#define EF_PARISC_TRAPNIL	0x00010000 /* Trap nil pointer dereference.  */
++#define EF_PARISC_EXT		0x00020000 /* Program uses arch. extensions. */
++#define EF_PARISC_LSB		0x00040000 /* Program expects little endian. */
++#define EF_PARISC_WIDE		0x00080000 /* Program expects wide mode.  */
++#define EF_PARISC_NO_KABP	0x00100000 /* No kernel assisted branch
++					      prediction.  */
++#define EF_PARISC_LAZYSWAP	0x00400000 /* Allow lazy swapping.  */
++#define EF_PARISC_ARCH		0x0000ffff /* Architecture version.  */
++
++/* Defined values for `e_flags & EF_PARISC_ARCH' are:  */
++
++#define EFA_PARISC_1_0		    0x020b /* PA-RISC 1.0 big-endian.  */
++#define EFA_PARISC_1_1		    0x0210 /* PA-RISC 1.1 big-endian.  */
++#define EFA_PARISC_2_0		    0x0214 /* PA-RISC 2.0 big-endian.  */
++
++/* Additional section indeces.  */
++
++#define SHN_PARISC_ANSI_COMMON	0xff00	   /* Section for tenatively declared
++					      symbols in ANSI C.  */
++#define SHN_PARISC_HUGE_COMMON	0xff01	   /* Common blocks in huge model.  */
++
++/* Legal values for sh_type field of Elf32_Shdr.  */
++
++#define SHT_PARISC_EXT		0x70000000 /* Contains product specific ext. */
++#define SHT_PARISC_UNWIND	0x70000001 /* Unwind information.  */
++#define SHT_PARISC_DOC		0x70000002 /* Debug info for optimized code. */
++
++/* Legal values for sh_flags field of Elf32_Shdr.  */
++
++#define SHF_PARISC_SHORT	0x20000000 /* Section with short addressing. */
++#define SHF_PARISC_HUGE		0x40000000 /* Section far from gp.  */
++#define SHF_PARISC_SBP		0x80000000 /* Static branch prediction code. */
++
++/* Legal values for ST_TYPE subfield of st_info (symbol type).  */
++
++#define STT_PARISC_MILLICODE	13	/* Millicode function entry point.  */
++
++#define STT_HP_OPAQUE		(STT_LOOS + 0x1)
++#define STT_HP_STUB		(STT_LOOS + 0x2)
++
++/* HPPA relocs.  */
++
++#define R_PARISC_NONE		0	/* No reloc.  */
++#define R_PARISC_DIR32		1	/* Direct 32-bit reference.  */
++#define R_PARISC_DIR21L		2	/* Left 21 bits of eff. address.  */
++#define R_PARISC_DIR17R		3	/* Right 17 bits of eff. address.  */
++#define R_PARISC_DIR17F		4	/* 17 bits of eff. address.  */
++#define R_PARISC_DIR14R		6	/* Right 14 bits of eff. address.  */
++#define R_PARISC_PCREL32	9	/* 32-bit rel. address.  */
++#define R_PARISC_PCREL21L	10	/* Left 21 bits of rel. address.  */
++#define R_PARISC_PCREL17R	11	/* Right 17 bits of rel. address.  */
++#define R_PARISC_PCREL17F	12	/* 17 bits of rel. address.  */
++#define R_PARISC_PCREL14R	14	/* Right 14 bits of rel. address.  */
++#define R_PARISC_DPREL21L	18	/* Left 21 bits of rel. address.  */
++#define R_PARISC_DPREL14R	22	/* Right 14 bits of rel. address.  */
++#define R_PARISC_GPREL21L	26	/* GP-relative, left 21 bits.  */
++#define R_PARISC_GPREL14R	30	/* GP-relative, right 14 bits.  */
++#define R_PARISC_LTOFF21L	34	/* LT-relative, left 21 bits.  */
++#define R_PARISC_LTOFF14R	38	/* LT-relative, right 14 bits.  */
++#define R_PARISC_SECREL32	41	/* 32 bits section rel. address.  */
++#define R_PARISC_SEGBASE	48	/* No relocation, set segment base.  */
++#define R_PARISC_SEGREL32	49	/* 32 bits segment rel. address.  */
++#define R_PARISC_PLTOFF21L	50	/* PLT rel. address, left 21 bits.  */
++#define R_PARISC_PLTOFF14R	54	/* PLT rel. address, right 14 bits.  */
++#define R_PARISC_LTOFF_FPTR32	57	/* 32 bits LT-rel. function pointer. */
++#define R_PARISC_LTOFF_FPTR21L	58	/* LT-rel. fct ptr, left 21 bits. */
++#define R_PARISC_LTOFF_FPTR14R	62	/* LT-rel. fct ptr, right 14 bits. */
++#define R_PARISC_FPTR64		64	/* 64 bits function address.  */
++#define R_PARISC_PLABEL32	65	/* 32 bits function address.  */
++#define R_PARISC_PLABEL21L	66	/* Left 21 bits of fdesc address.  */
++#define R_PARISC_PLABEL14R	70	/* Right 14 bits of fdesc address.  */
++#define R_PARISC_PCREL64	72	/* 64 bits PC-rel. address.  */
++#define R_PARISC_PCREL22F	74	/* 22 bits PC-rel. address.  */
++#define R_PARISC_PCREL14WR	75	/* PC-rel. address, right 14 bits.  */
++#define R_PARISC_PCREL14DR	76	/* PC rel. address, right 14 bits.  */
++#define R_PARISC_PCREL16F	77	/* 16 bits PC-rel. address.  */
++#define R_PARISC_PCREL16WF	78	/* 16 bits PC-rel. address.  */
++#define R_PARISC_PCREL16DF	79	/* 16 bits PC-rel. address.  */
++#define R_PARISC_DIR64		80	/* 64 bits of eff. address.  */
++#define R_PARISC_DIR14WR	83	/* 14 bits of eff. address.  */
++#define R_PARISC_DIR14DR	84	/* 14 bits of eff. address.  */
++#define R_PARISC_DIR16F		85	/* 16 bits of eff. address.  */
++#define R_PARISC_DIR16WF	86	/* 16 bits of eff. address.  */
++#define R_PARISC_DIR16DF	87	/* 16 bits of eff. address.  */
++#define R_PARISC_GPREL64	88	/* 64 bits of GP-rel. address.  */
++#define R_PARISC_GPREL14WR	91	/* GP-rel. address, right 14 bits.  */
++#define R_PARISC_GPREL14DR	92	/* GP-rel. address, right 14 bits.  */
++#define R_PARISC_GPREL16F	93	/* 16 bits GP-rel. address.  */
++#define R_PARISC_GPREL16WF	94	/* 16 bits GP-rel. address.  */
++#define R_PARISC_GPREL16DF	95	/* 16 bits GP-rel. address.  */
++#define R_PARISC_LTOFF64	96	/* 64 bits LT-rel. address.  */
++#define R_PARISC_LTOFF14WR	99	/* LT-rel. address, right 14 bits.  */
++#define R_PARISC_LTOFF14DR	100	/* LT-rel. address, right 14 bits.  */
++#define R_PARISC_LTOFF16F	101	/* 16 bits LT-rel. address.  */
++#define R_PARISC_LTOFF16WF	102	/* 16 bits LT-rel. address.  */
++#define R_PARISC_LTOFF16DF	103	/* 16 bits LT-rel. address.  */
++#define R_PARISC_SECREL64	104	/* 64 bits section rel. address.  */
++#define R_PARISC_SEGREL64	112	/* 64 bits segment rel. address.  */
++#define R_PARISC_PLTOFF14WR	115	/* PLT-rel. address, right 14 bits.  */
++#define R_PARISC_PLTOFF14DR	116	/* PLT-rel. address, right 14 bits.  */
++#define R_PARISC_PLTOFF16F	117	/* 16 bits LT-rel. address.  */
++#define R_PARISC_PLTOFF16WF	118	/* 16 bits PLT-rel. address.  */
++#define R_PARISC_PLTOFF16DF	119	/* 16 bits PLT-rel. address.  */
++#define R_PARISC_LTOFF_FPTR64	120	/* 64 bits LT-rel. function ptr.  */
++#define R_PARISC_LTOFF_FPTR14WR	123	/* LT-rel. fct. ptr., right 14 bits. */
++#define R_PARISC_LTOFF_FPTR14DR	124	/* LT-rel. fct. ptr., right 14 bits. */
++#define R_PARISC_LTOFF_FPTR16F	125	/* 16 bits LT-rel. function ptr.  */
++#define R_PARISC_LTOFF_FPTR16WF	126	/* 16 bits LT-rel. function ptr.  */
++#define R_PARISC_LTOFF_FPTR16DF	127	/* 16 bits LT-rel. function ptr.  */
++#define R_PARISC_LORESERVE	128
++#define R_PARISC_COPY		128	/* Copy relocation.  */
++#define R_PARISC_IPLT		129	/* Dynamic reloc, imported PLT */
++#define R_PARISC_EPLT		130	/* Dynamic reloc, exported PLT */
++#define R_PARISC_TPREL32	153	/* 32 bits TP-rel. address.  */
++#define R_PARISC_TPREL21L	154	/* TP-rel. address, left 21 bits.  */
++#define R_PARISC_TPREL14R	158	/* TP-rel. address, right 14 bits.  */
++#define R_PARISC_LTOFF_TP21L	162	/* LT-TP-rel. address, left 21 bits. */
++#define R_PARISC_LTOFF_TP14R	166	/* LT-TP-rel. address, right 14 bits.*/
++#define R_PARISC_LTOFF_TP14F	167	/* 14 bits LT-TP-rel. address.  */
++#define R_PARISC_TPREL64	216	/* 64 bits TP-rel. address.  */
++#define R_PARISC_TPREL14WR	219	/* TP-rel. address, right 14 bits.  */
++#define R_PARISC_TPREL14DR	220	/* TP-rel. address, right 14 bits.  */
++#define R_PARISC_TPREL16F	221	/* 16 bits TP-rel. address.  */
++#define R_PARISC_TPREL16WF	222	/* 16 bits TP-rel. address.  */
++#define R_PARISC_TPREL16DF	223	/* 16 bits TP-rel. address.  */
++#define R_PARISC_LTOFF_TP64	224	/* 64 bits LT-TP-rel. address.  */
++#define R_PARISC_LTOFF_TP14WR	227	/* LT-TP-rel. address, right 14 bits.*/
++#define R_PARISC_LTOFF_TP14DR	228	/* LT-TP-rel. address, right 14 bits.*/
++#define R_PARISC_LTOFF_TP16F	229	/* 16 bits LT-TP-rel. address.  */
++#define R_PARISC_LTOFF_TP16WF	230	/* 16 bits LT-TP-rel. address.  */
++#define R_PARISC_LTOFF_TP16DF	231	/* 16 bits LT-TP-rel. address.  */
++#define R_PARISC_GNU_VTENTRY	232
++#define R_PARISC_GNU_VTINHERIT	233
++#define R_PARISC_TLS_GD21L	234	/* GD 21-bit left.  */
++#define R_PARISC_TLS_GD14R	235	/* GD 14-bit right.  */
++#define R_PARISC_TLS_GDCALL	236	/* GD call to __t_g_a.  */
++#define R_PARISC_TLS_LDM21L	237	/* LD module 21-bit left.  */
++#define R_PARISC_TLS_LDM14R	238	/* LD module 14-bit right.  */
++#define R_PARISC_TLS_LDMCALL	239	/* LD module call to __t_g_a.  */
++#define R_PARISC_TLS_LDO21L	240	/* LD offset 21-bit left.  */
++#define R_PARISC_TLS_LDO14R	241	/* LD offset 14-bit right.  */
++#define R_PARISC_TLS_DTPMOD32	242	/* DTP module 32-bit.  */
++#define R_PARISC_TLS_DTPMOD64	243	/* DTP module 64-bit.  */
++#define R_PARISC_TLS_DTPOFF32	244	/* DTP offset 32-bit.  */
++#define R_PARISC_TLS_DTPOFF64	245	/* DTP offset 32-bit.  */
++#define R_PARISC_TLS_LE21L	R_PARISC_TPREL21L
++#define R_PARISC_TLS_LE14R	R_PARISC_TPREL14R
++#define R_PARISC_TLS_IE21L	R_PARISC_LTOFF_TP21L
++#define R_PARISC_TLS_IE14R	R_PARISC_LTOFF_TP14R
++#define R_PARISC_TLS_TPREL32	R_PARISC_TPREL32
++#define R_PARISC_TLS_TPREL64	R_PARISC_TPREL64
++#define R_PARISC_HIRESERVE	255
++
++/* Legal values for p_type field of Elf32_Phdr/Elf64_Phdr.  */
++
++#define PT_HP_TLS		(PT_LOOS + 0x0)
++#define PT_HP_CORE_NONE		(PT_LOOS + 0x1)
++#define PT_HP_CORE_VERSION	(PT_LOOS + 0x2)
++#define PT_HP_CORE_KERNEL	(PT_LOOS + 0x3)
++#define PT_HP_CORE_COMM		(PT_LOOS + 0x4)
++#define PT_HP_CORE_PROC		(PT_LOOS + 0x5)
++#define PT_HP_CORE_LOADABLE	(PT_LOOS + 0x6)
++#define PT_HP_CORE_STACK	(PT_LOOS + 0x7)
++#define PT_HP_CORE_SHM		(PT_LOOS + 0x8)
++#define PT_HP_CORE_MMF		(PT_LOOS + 0x9)
++#define PT_HP_PARALLEL		(PT_LOOS + 0x10)
++#define PT_HP_FASTBIND		(PT_LOOS + 0x11)
++#define PT_HP_OPT_ANNOT		(PT_LOOS + 0x12)
++#define PT_HP_HSL_ANNOT		(PT_LOOS + 0x13)
++#define PT_HP_STACK		(PT_LOOS + 0x14)
++
++#define PT_PARISC_ARCHEXT	0x70000000
++#define PT_PARISC_UNWIND	0x70000001
++
++/* Legal values for p_flags field of Elf32_Phdr/Elf64_Phdr.  */
++
++#define PF_PARISC_SBP		0x08000000
++
++#define PF_HP_PAGE_SIZE		0x00100000
++#define PF_HP_FAR_SHARED	0x00200000
++#define PF_HP_NEAR_SHARED	0x00400000
++#define PF_HP_CODE		0x01000000
++#define PF_HP_MODIFY		0x02000000
++#define PF_HP_LAZYSWAP		0x04000000
++#define PF_HP_SBP		0x08000000
++
++
++/* Alpha specific definitions.  */
++
++/* Legal values for e_flags field of Elf64_Ehdr.  */
++
++#define EF_ALPHA_32BIT		1	/* All addresses must be < 2GB.  */
++#define EF_ALPHA_CANRELAX	2	/* Relocations for relaxing exist.  */
++
++/* Legal values for sh_type field of Elf64_Shdr.  */
++
++/* These two are primerily concerned with ECOFF debugging info.  */
++#define SHT_ALPHA_DEBUG		0x70000001
++#define SHT_ALPHA_REGINFO	0x70000002
++
++/* Legal values for sh_flags field of Elf64_Shdr.  */
++
++#define SHF_ALPHA_GPREL		0x10000000
++
++/* Legal values for st_other field of Elf64_Sym.  */
++#define STO_ALPHA_NOPV		0x80	/* No PV required.  */
++#define STO_ALPHA_STD_GPLOAD	0x88	/* PV only used for initial ldgp.  */
++
++/* Alpha relocs.  */
++
++#define R_ALPHA_NONE		0	/* No reloc */
++#define R_ALPHA_REFLONG		1	/* Direct 32 bit */
++#define R_ALPHA_REFQUAD		2	/* Direct 64 bit */
++#define R_ALPHA_GPREL32		3	/* GP relative 32 bit */
++#define R_ALPHA_LITERAL		4	/* GP relative 16 bit w/optimization */
++#define R_ALPHA_LITUSE		5	/* Optimization hint for LITERAL */
++#define R_ALPHA_GPDISP		6	/* Add displacement to GP */
++#define R_ALPHA_BRADDR		7	/* PC+4 relative 23 bit shifted */
++#define R_ALPHA_HINT		8	/* PC+4 relative 16 bit shifted */
++#define R_ALPHA_SREL16		9	/* PC relative 16 bit */
++#define R_ALPHA_SREL32		10	/* PC relative 32 bit */
++#define R_ALPHA_SREL64		11	/* PC relative 64 bit */
++#define R_ALPHA_GPRELHIGH	17	/* GP relative 32 bit, high 16 bits */
++#define R_ALPHA_GPRELLOW	18	/* GP relative 32 bit, low 16 bits */
++#define R_ALPHA_GPREL16		19	/* GP relative 16 bit */
++#define R_ALPHA_COPY		24	/* Copy symbol at runtime */
++#define R_ALPHA_GLOB_DAT	25	/* Create GOT entry */
++#define R_ALPHA_JMP_SLOT	26	/* Create PLT entry */
++#define R_ALPHA_RELATIVE	27	/* Adjust by program base */
++#define R_ALPHA_TLS_GD_HI	28
++#define R_ALPHA_TLSGD		29
++#define R_ALPHA_TLS_LDM		30
++#define R_ALPHA_DTPMOD64	31
++#define R_ALPHA_GOTDTPREL	32
++#define R_ALPHA_DTPREL64	33
++#define R_ALPHA_DTPRELHI	34
++#define R_ALPHA_DTPRELLO	35
++#define R_ALPHA_DTPREL16	36
++#define R_ALPHA_GOTTPREL	37
++#define R_ALPHA_TPREL64		38
++#define R_ALPHA_TPRELHI		39
++#define R_ALPHA_TPRELLO		40
++#define R_ALPHA_TPREL16		41
++/* Keep this the last entry.  */
++#define R_ALPHA_NUM		46
++
++/* Magic values of the LITUSE relocation addend.  */
++#define LITUSE_ALPHA_ADDR	0
++#define LITUSE_ALPHA_BASE	1
++#define LITUSE_ALPHA_BYTOFF	2
++#define LITUSE_ALPHA_JSR	3
++#define LITUSE_ALPHA_TLS_GD	4
++#define LITUSE_ALPHA_TLS_LDM	5
++
++/* Legal values for d_tag of Elf64_Dyn.  */
++#define DT_ALPHA_PLTRO		(DT_LOPROC + 0)
++#define DT_ALPHA_NUM		1
++
++/* PowerPC specific declarations */
++
++/* Values for Elf32/64_Ehdr.e_flags.  */
++#define EF_PPC_EMB		0x80000000	/* PowerPC embedded flag */
++
++/* Cygnus local bits below */
++#define EF_PPC_RELOCATABLE	0x00010000	/* PowerPC -mrelocatable flag*/
++#define EF_PPC_RELOCATABLE_LIB	0x00008000	/* PowerPC -mrelocatable-lib
++						   flag */
++
++/* PowerPC relocations defined by the ABIs */
++#define R_PPC_NONE		0
++#define R_PPC_ADDR32		1	/* 32bit absolute address */
++#define R_PPC_ADDR24		2	/* 26bit address, 2 bits ignored.  */
++#define R_PPC_ADDR16		3	/* 16bit absolute address */
++#define R_PPC_ADDR16_LO		4	/* lower 16bit of absolute address */
++#define R_PPC_ADDR16_HI		5	/* high 16bit of absolute address */
++#define R_PPC_ADDR16_HA		6	/* adjusted high 16bit */
++#define R_PPC_ADDR14		7	/* 16bit address, 2 bits ignored */
++#define R_PPC_ADDR14_BRTAKEN	8
++#define R_PPC_ADDR14_BRNTAKEN	9
++#define R_PPC_REL24		10	/* PC relative 26 bit */
++#define R_PPC_REL14		11	/* PC relative 16 bit */
++#define R_PPC_REL14_BRTAKEN	12
++#define R_PPC_REL14_BRNTAKEN	13
++#define R_PPC_GOT16		14
++#define R_PPC_GOT16_LO		15
++#define R_PPC_GOT16_HI		16
++#define R_PPC_GOT16_HA		17
++#define R_PPC_PLTREL24		18
++#define R_PPC_COPY		19
++#define R_PPC_GLOB_DAT		20
++#define R_PPC_JMP_SLOT		21
++#define R_PPC_RELATIVE		22
++#define R_PPC_LOCAL24PC		23
++#define R_PPC_UADDR32		24
++#define R_PPC_UADDR16		25
++#define R_PPC_REL32		26
++#define R_PPC_PLT32		27
++#define R_PPC_PLTREL32		28
++#define R_PPC_PLT16_LO		29
++#define R_PPC_PLT16_HI		30
++#define R_PPC_PLT16_HA		31
++#define R_PPC_SDAREL16		32
++#define R_PPC_SECTOFF		33
++#define R_PPC_SECTOFF_LO	34
++#define R_PPC_SECTOFF_HI	35
++#define R_PPC_SECTOFF_HA	36
++
++/* PowerPC relocations defined for the TLS access ABI.  */
++#define R_PPC_TLS		67 /* none	(sym+add)@tls */
++#define R_PPC_DTPMOD32		68 /* word32	(sym+add)@dtpmod */
++#define R_PPC_TPREL16		69 /* half16*	(sym+add)@tprel */
++#define R_PPC_TPREL16_LO	70 /* half16	(sym+add)@tprel@l */
++#define R_PPC_TPREL16_HI	71 /* half16	(sym+add)@tprel@h */
++#define R_PPC_TPREL16_HA	72 /* half16	(sym+add)@tprel@ha */
++#define R_PPC_TPREL32		73 /* word32	(sym+add)@tprel */
++#define R_PPC_DTPREL16		74 /* half16*	(sym+add)@dtprel */
++#define R_PPC_DTPREL16_LO	75 /* half16	(sym+add)@dtprel@l */
++#define R_PPC_DTPREL16_HI	76 /* half16	(sym+add)@dtprel@h */
++#define R_PPC_DTPREL16_HA	77 /* half16	(sym+add)@dtprel@ha */
++#define R_PPC_DTPREL32		78 /* word32	(sym+add)@dtprel */
++#define R_PPC_GOT_TLSGD16	79 /* half16*	(sym+add)@got@tlsgd */
++#define R_PPC_GOT_TLSGD16_LO	80 /* half16	(sym+add)@got@tlsgd@l */
++#define R_PPC_GOT_TLSGD16_HI	81 /* half16	(sym+add)@got@tlsgd@h */
++#define R_PPC_GOT_TLSGD16_HA	82 /* half16	(sym+add)@got@tlsgd@ha */
++#define R_PPC_GOT_TLSLD16	83 /* half16*	(sym+add)@got@tlsld */
++#define R_PPC_GOT_TLSLD16_LO	84 /* half16	(sym+add)@got@tlsld@l */
++#define R_PPC_GOT_TLSLD16_HI	85 /* half16	(sym+add)@got@tlsld@h */
++#define R_PPC_GOT_TLSLD16_HA	86 /* half16	(sym+add)@got@tlsld@ha */
++#define R_PPC_GOT_TPREL16	87 /* half16*	(sym+add)@got@tprel */
++#define R_PPC_GOT_TPREL16_LO	88 /* half16	(sym+add)@got@tprel@l */
++#define R_PPC_GOT_TPREL16_HI	89 /* half16	(sym+add)@got@tprel@h */
++#define R_PPC_GOT_TPREL16_HA	90 /* half16	(sym+add)@got@tprel@ha */
++#define R_PPC_GOT_DTPREL16	91 /* half16*	(sym+add)@got@dtprel */
++#define R_PPC_GOT_DTPREL16_LO	92 /* half16*	(sym+add)@got@dtprel@l */
++#define R_PPC_GOT_DTPREL16_HI	93 /* half16*	(sym+add)@got@dtprel@h */
++#define R_PPC_GOT_DTPREL16_HA	94 /* half16*	(sym+add)@got@dtprel@ha */
++
++/* The remaining relocs are from the Embedded ELF ABI, and are not
++   in the SVR4 ELF ABI.  */
++#define R_PPC_EMB_NADDR32	101
++#define R_PPC_EMB_NADDR16	102
++#define R_PPC_EMB_NADDR16_LO	103
++#define R_PPC_EMB_NADDR16_HI	104
++#define R_PPC_EMB_NADDR16_HA	105
++#define R_PPC_EMB_SDAI16	106
++#define R_PPC_EMB_SDA2I16	107
++#define R_PPC_EMB_SDA2REL	108
++#define R_PPC_EMB_SDA21		109	/* 16 bit offset in SDA */
++#define R_PPC_EMB_MRKREF	110
++#define R_PPC_EMB_RELSEC16	111
++#define R_PPC_EMB_RELST_LO	112
++#define R_PPC_EMB_RELST_HI	113
++#define R_PPC_EMB_RELST_HA	114
++#define R_PPC_EMB_BIT_FLD	115
++#define R_PPC_EMB_RELSDA	116	/* 16 bit relative offset in SDA */
++
++/* Diab tool relocations.  */
++#define R_PPC_DIAB_SDA21_LO	180	/* like EMB_SDA21, but lower 16 bit */
++#define R_PPC_DIAB_SDA21_HI	181	/* like EMB_SDA21, but high 16 bit */
++#define R_PPC_DIAB_SDA21_HA	182	/* like EMB_SDA21, adjusted high 16 */
++#define R_PPC_DIAB_RELSDA_LO	183	/* like EMB_RELSDA, but lower 16 bit */
++#define R_PPC_DIAB_RELSDA_HI	184	/* like EMB_RELSDA, but high 16 bit */
++#define R_PPC_DIAB_RELSDA_HA	185	/* like EMB_RELSDA, adjusted high 16 */
++
++/* GNU extension to support local ifunc.  */
++#define R_PPC_IRELATIVE		248
++
++/* GNU relocs used in PIC code sequences.  */
++#define R_PPC_REL16		249	/* half16   (sym+add-.) */
++#define R_PPC_REL16_LO		250	/* half16   (sym+add-.)@l */
++#define R_PPC_REL16_HI		251	/* half16   (sym+add-.)@h */
++#define R_PPC_REL16_HA		252	/* half16   (sym+add-.)@ha */
++
++/* This is a phony reloc to handle any old fashioned TOC16 references
++   that may still be in object files.  */
++#define R_PPC_TOC16		255
++
++/* PowerPC specific values for the Dyn d_tag field.  */
++#define DT_PPC_GOT		(DT_LOPROC + 0)
++#define DT_PPC_NUM		1
++
++/* PowerPC64 relocations defined by the ABIs */
++#define R_PPC64_NONE		R_PPC_NONE
++#define R_PPC64_ADDR32		R_PPC_ADDR32 /* 32bit absolute address */
++#define R_PPC64_ADDR24		R_PPC_ADDR24 /* 26bit address, word aligned */
++#define R_PPC64_ADDR16		R_PPC_ADDR16 /* 16bit absolute address */
++#define R_PPC64_ADDR16_LO	R_PPC_ADDR16_LO	/* lower 16bits of address */
++#define R_PPC64_ADDR16_HI	R_PPC_ADDR16_HI	/* high 16bits of address. */
++#define R_PPC64_ADDR16_HA	R_PPC_ADDR16_HA /* adjusted high 16bits.  */
++#define R_PPC64_ADDR14		R_PPC_ADDR14 /* 16bit address, word aligned */
++#define R_PPC64_ADDR14_BRTAKEN	R_PPC_ADDR14_BRTAKEN
++#define R_PPC64_ADDR14_BRNTAKEN	R_PPC_ADDR14_BRNTAKEN
++#define R_PPC64_REL24		R_PPC_REL24 /* PC-rel. 26 bit, word aligned */
++#define R_PPC64_REL14		R_PPC_REL14 /* PC relative 16 bit */
++#define R_PPC64_REL14_BRTAKEN	R_PPC_REL14_BRTAKEN
++#define R_PPC64_REL14_BRNTAKEN	R_PPC_REL14_BRNTAKEN
++#define R_PPC64_GOT16		R_PPC_GOT16
++#define R_PPC64_GOT16_LO	R_PPC_GOT16_LO
++#define R_PPC64_GOT16_HI	R_PPC_GOT16_HI
++#define R_PPC64_GOT16_HA	R_PPC_GOT16_HA
++
++#define R_PPC64_COPY		R_PPC_COPY
++#define R_PPC64_GLOB_DAT	R_PPC_GLOB_DAT
++#define R_PPC64_JMP_SLOT	R_PPC_JMP_SLOT
++#define R_PPC64_RELATIVE	R_PPC_RELATIVE
++
++#define R_PPC64_UADDR32		R_PPC_UADDR32
++#define R_PPC64_UADDR16		R_PPC_UADDR16
++#define R_PPC64_REL32		R_PPC_REL32
++#define R_PPC64_PLT32		R_PPC_PLT32
++#define R_PPC64_PLTREL32	R_PPC_PLTREL32
++#define R_PPC64_PLT16_LO	R_PPC_PLT16_LO
++#define R_PPC64_PLT16_HI	R_PPC_PLT16_HI
++#define R_PPC64_PLT16_HA	R_PPC_PLT16_HA
++
++#define R_PPC64_SECTOFF		R_PPC_SECTOFF
++#define R_PPC64_SECTOFF_LO	R_PPC_SECTOFF_LO
++#define R_PPC64_SECTOFF_HI	R_PPC_SECTOFF_HI
++#define R_PPC64_SECTOFF_HA	R_PPC_SECTOFF_HA
++#define R_PPC64_ADDR30		37 /* word30 (S + A - P) >> 2 */
++#define R_PPC64_ADDR64		38 /* doubleword64 S + A */
++#define R_PPC64_ADDR16_HIGHER	39 /* half16 #higher(S + A) */
++#define R_PPC64_ADDR16_HIGHERA	40 /* half16 #highera(S + A) */
++#define R_PPC64_ADDR16_HIGHEST	41 /* half16 #highest(S + A) */
++#define R_PPC64_ADDR16_HIGHESTA	42 /* half16 #highesta(S + A) */
++#define R_PPC64_UADDR64		43 /* doubleword64 S + A */
++#define R_PPC64_REL64		44 /* doubleword64 S + A - P */
++#define R_PPC64_PLT64		45 /* doubleword64 L + A */
++#define R_PPC64_PLTREL64	46 /* doubleword64 L + A - P */
++#define R_PPC64_TOC16		47 /* half16* S + A - .TOC */
++#define R_PPC64_TOC16_LO	48 /* half16 #lo(S + A - .TOC.) */
++#define R_PPC64_TOC16_HI	49 /* half16 #hi(S + A - .TOC.) */
++#define R_PPC64_TOC16_HA	50 /* half16 #ha(S + A - .TOC.) */
++#define R_PPC64_TOC		51 /* doubleword64 .TOC */
++#define R_PPC64_PLTGOT16	52 /* half16* M + A */
++#define R_PPC64_PLTGOT16_LO	53 /* half16 #lo(M + A) */
++#define R_PPC64_PLTGOT16_HI	54 /* half16 #hi(M + A) */
++#define R_PPC64_PLTGOT16_HA	55 /* half16 #ha(M + A) */
++
++#define R_PPC64_ADDR16_DS	56 /* half16ds* (S + A) >> 2 */
++#define R_PPC64_ADDR16_LO_DS	57 /* half16ds  #lo(S + A) >> 2 */
++#define R_PPC64_GOT16_DS	58 /* half16ds* (G + A) >> 2 */
++#define R_PPC64_GOT16_LO_DS	59 /* half16ds  #lo(G + A) >> 2 */
++#define R_PPC64_PLT16_LO_DS	60 /* half16ds  #lo(L + A) >> 2 */
++#define R_PPC64_SECTOFF_DS	61 /* half16ds* (R + A) >> 2 */
++#define R_PPC64_SECTOFF_LO_DS	62 /* half16ds  #lo(R + A) >> 2 */
++#define R_PPC64_TOC16_DS	63 /* half16ds* (S + A - .TOC.) >> 2 */
++#define R_PPC64_TOC16_LO_DS	64 /* half16ds  #lo(S + A - .TOC.) >> 2 */
++#define R_PPC64_PLTGOT16_DS	65 /* half16ds* (M + A) >> 2 */
++#define R_PPC64_PLTGOT16_LO_DS	66 /* half16ds  #lo(M + A) >> 2 */
++
++/* PowerPC64 relocations defined for the TLS access ABI.  */
++#define R_PPC64_TLS		67 /* none	(sym+add)@tls */
++#define R_PPC64_DTPMOD64	68 /* doubleword64 (sym+add)@dtpmod */
++#define R_PPC64_TPREL16		69 /* half16*	(sym+add)@tprel */
++#define R_PPC64_TPREL16_LO	70 /* half16	(sym+add)@tprel@l */
++#define R_PPC64_TPREL16_HI	71 /* half16	(sym+add)@tprel@h */
++#define R_PPC64_TPREL16_HA	72 /* half16	(sym+add)@tprel@ha */
++#define R_PPC64_TPREL64		73 /* doubleword64 (sym+add)@tprel */
++#define R_PPC64_DTPREL16	74 /* half16*	(sym+add)@dtprel */
++#define R_PPC64_DTPREL16_LO	75 /* half16	(sym+add)@dtprel@l */
++#define R_PPC64_DTPREL16_HI	76 /* half16	(sym+add)@dtprel@h */
++#define R_PPC64_DTPREL16_HA	77 /* half16	(sym+add)@dtprel@ha */
++#define R_PPC64_DTPREL64	78 /* doubleword64 (sym+add)@dtprel */
++#define R_PPC64_GOT_TLSGD16	79 /* half16*	(sym+add)@got@tlsgd */
++#define R_PPC64_GOT_TLSGD16_LO	80 /* half16	(sym+add)@got@tlsgd@l */
++#define R_PPC64_GOT_TLSGD16_HI	81 /* half16	(sym+add)@got@tlsgd@h */
++#define R_PPC64_GOT_TLSGD16_HA	82 /* half16	(sym+add)@got@tlsgd@ha */
++#define R_PPC64_GOT_TLSLD16	83 /* half16*	(sym+add)@got@tlsld */
++#define R_PPC64_GOT_TLSLD16_LO	84 /* half16	(sym+add)@got@tlsld@l */
++#define R_PPC64_GOT_TLSLD16_HI	85 /* half16	(sym+add)@got@tlsld@h */
++#define R_PPC64_GOT_TLSLD16_HA	86 /* half16	(sym+add)@got@tlsld@ha */
++#define R_PPC64_GOT_TPREL16_DS	87 /* half16ds*	(sym+add)@got@tprel */
++#define R_PPC64_GOT_TPREL16_LO_DS 88 /* half16ds (sym+add)@got@tprel@l */
++#define R_PPC64_GOT_TPREL16_HI	89 /* half16	(sym+add)@got@tprel@h */
++#define R_PPC64_GOT_TPREL16_HA	90 /* half16	(sym+add)@got@tprel@ha */
++#define R_PPC64_GOT_DTPREL16_DS	91 /* half16ds*	(sym+add)@got@dtprel */
++#define R_PPC64_GOT_DTPREL16_LO_DS 92 /* half16ds (sym+add)@got@dtprel@l */
++#define R_PPC64_GOT_DTPREL16_HI	93 /* half16	(sym+add)@got@dtprel@h */
++#define R_PPC64_GOT_DTPREL16_HA	94 /* half16	(sym+add)@got@dtprel@ha */
++#define R_PPC64_TPREL16_DS	95 /* half16ds*	(sym+add)@tprel */
++#define R_PPC64_TPREL16_LO_DS	96 /* half16ds	(sym+add)@tprel@l */
++#define R_PPC64_TPREL16_HIGHER	97 /* half16	(sym+add)@tprel@higher */
++#define R_PPC64_TPREL16_HIGHERA	98 /* half16	(sym+add)@tprel@highera */
++#define R_PPC64_TPREL16_HIGHEST	99 /* half16	(sym+add)@tprel@highest */
++#define R_PPC64_TPREL16_HIGHESTA 100 /* half16	(sym+add)@tprel@highesta */
++#define R_PPC64_DTPREL16_DS	101 /* half16ds* (sym+add)@dtprel */
++#define R_PPC64_DTPREL16_LO_DS	102 /* half16ds	(sym+add)@dtprel@l */
++#define R_PPC64_DTPREL16_HIGHER	103 /* half16	(sym+add)@dtprel@higher */
++#define R_PPC64_DTPREL16_HIGHERA 104 /* half16	(sym+add)@dtprel@highera */
++#define R_PPC64_DTPREL16_HIGHEST 105 /* half16	(sym+add)@dtprel@highest */
++#define R_PPC64_DTPREL16_HIGHESTA 106 /* half16	(sym+add)@dtprel@highesta */
++
++/* GNU extension to support local ifunc.  */
++#define R_PPC64_JMP_IREL	247
++#define R_PPC64_IRELATIVE	248
++#define R_PPC64_REL16		249	/* half16   (sym+add-.) */
++#define R_PPC64_REL16_LO	250	/* half16   (sym+add-.)@l */
++#define R_PPC64_REL16_HI	251	/* half16   (sym+add-.)@h */
++#define R_PPC64_REL16_HA	252	/* half16   (sym+add-.)@ha */
++
++/* PowerPC64 specific values for the Dyn d_tag field.  */
++#define DT_PPC64_GLINK  (DT_LOPROC + 0)
++#define DT_PPC64_OPD	(DT_LOPROC + 1)
++#define DT_PPC64_OPDSZ	(DT_LOPROC + 2)
++#define DT_PPC64_NUM    3
++
++
++/* ARM specific declarations */
++
++/* Processor specific flags for the ELF header e_flags field.  */
++#define EF_ARM_RELEXEC		0x01
++#define EF_ARM_HASENTRY		0x02
++#define EF_ARM_INTERWORK	0x04
++#define EF_ARM_APCS_26		0x08
++#define EF_ARM_APCS_FLOAT	0x10
++#define EF_ARM_PIC		0x20
++#define EF_ARM_ALIGN8		0x40 /* 8-bit structure alignment is in use */
++#define EF_ARM_NEW_ABI		0x80
++#define EF_ARM_OLD_ABI		0x100
++#define EF_ARM_SOFT_FLOAT	0x200
++#define EF_ARM_VFP_FLOAT	0x400
++#define EF_ARM_MAVERICK_FLOAT	0x800
++
++
++/* Other constants defined in the ARM ELF spec. version B-01.  */
++/* NB. These conflict with values defined above.  */
++#define EF_ARM_SYMSARESORTED	0x04
++#define EF_ARM_DYNSYMSUSESEGIDX	0x08
++#define EF_ARM_MAPSYMSFIRST	0x10
++#define EF_ARM_EABIMASK		0XFF000000
++
++/* Constants defined in AAELF.  */
++#define EF_ARM_BE8	    0x00800000
++#define EF_ARM_LE8	    0x00400000
++
++#define EF_ARM_EABI_VERSION(flags)	((flags) & EF_ARM_EABIMASK)
++#define EF_ARM_EABI_UNKNOWN	0x00000000
++#define EF_ARM_EABI_VER1	0x01000000
++#define EF_ARM_EABI_VER2	0x02000000
++#define EF_ARM_EABI_VER3	0x03000000
++#define EF_ARM_EABI_VER4	0x04000000
++#define EF_ARM_EABI_VER5	0x05000000
++
++/* Additional symbol types for Thumb.  */
++#define STT_ARM_TFUNC		STT_LOPROC /* A Thumb function.  */
++#define STT_ARM_16BIT		STT_HIPROC /* A Thumb label.  */
++
++/* ARM-specific values for sh_flags */
++#define SHF_ARM_ENTRYSECT	0x10000000 /* Section contains an entry point */
++#define SHF_ARM_COMDEF		0x80000000 /* Section may be multiply defined
++					      in the input to a link step.  */
++
++/* ARM-specific program header flags */
++#define PF_ARM_SB		0x10000000 /* Segment contains the location
++					      addressed by the static base. */
++#define PF_ARM_PI		0x20000000 /* Position-independent segment.  */
++#define PF_ARM_ABS		0x40000000 /* Absolute segment.  */
++
++/* Processor specific values for the Phdr p_type field.  */
++#define PT_ARM_EXIDX		(PT_LOPROC + 1)	/* ARM unwind segment.  */
++
++/* Processor specific values for the Shdr sh_type field.  */
++#define SHT_ARM_EXIDX		(SHT_LOPROC + 1) /* ARM unwind section.  */
++#define SHT_ARM_PREEMPTMAP	(SHT_LOPROC + 2) /* Preemption details.  */
++#define SHT_ARM_ATTRIBUTES	(SHT_LOPROC + 3) /* ARM attributes section.  */
++
++
++/* ARM relocs.  */
++
++#define R_ARM_NONE		0	/* No reloc */
++#define R_ARM_PC24		1	/* PC relative 26 bit branch */
++#define R_ARM_ABS32		2	/* Direct 32 bit  */
++#define R_ARM_REL32		3	/* PC relative 32 bit */
++#define R_ARM_PC13		4
++#define R_ARM_ABS16		5	/* Direct 16 bit */
++#define R_ARM_ABS12		6	/* Direct 12 bit */
++#define R_ARM_THM_ABS5		7
++#define R_ARM_ABS8		8	/* Direct 8 bit */
++#define R_ARM_SBREL32		9
++#define R_ARM_THM_PC22		10
++#define R_ARM_THM_PC8		11
++#define R_ARM_AMP_VCALL9	12
++#define R_ARM_SWI24		13	/* Obsolete static relocation.  */
++#define R_ARM_TLS_DESC		13      /* Dynamic relocation.  */
++#define R_ARM_THM_SWI8		14
++#define R_ARM_XPC25		15
++#define R_ARM_THM_XPC22		16
++#define R_ARM_TLS_DTPMOD32	17	/* ID of module containing symbol */
++#define R_ARM_TLS_DTPOFF32	18	/* Offset in TLS block */
++#define R_ARM_TLS_TPOFF32	19	/* Offset in static TLS block */
++#define R_ARM_COPY		20	/* Copy symbol at runtime */
++#define R_ARM_GLOB_DAT		21	/* Create GOT entry */
++#define R_ARM_JUMP_SLOT		22	/* Create PLT entry */
++#define R_ARM_RELATIVE		23	/* Adjust by program base */
++#define R_ARM_GOTOFF		24	/* 32 bit offset to GOT */
++#define R_ARM_GOTPC		25	/* 32 bit PC relative offset to GOT */
++#define R_ARM_GOT32		26	/* 32 bit GOT entry */
++#define R_ARM_PLT32		27	/* 32 bit PLT address */
++#define R_ARM_ALU_PCREL_7_0	32
++#define R_ARM_ALU_PCREL_15_8	33
++#define R_ARM_ALU_PCREL_23_15	34
++#define R_ARM_LDR_SBREL_11_0	35
++#define R_ARM_ALU_SBREL_19_12	36
++#define R_ARM_ALU_SBREL_27_20	37
++#define R_ARM_TLS_GOTDESC	90
++#define R_ARM_TLS_CALL		91
++#define R_ARM_TLS_DESCSEQ	92
++#define R_ARM_THM_TLS_CALL	93
++#define R_ARM_GNU_VTENTRY	100
++#define R_ARM_GNU_VTINHERIT	101
++#define R_ARM_THM_PC11		102	/* thumb unconditional branch */
++#define R_ARM_THM_PC9		103	/* thumb conditional branch */
++#define R_ARM_TLS_GD32		104	/* PC-rel 32 bit for global dynamic
++					   thread local data */
++#define R_ARM_TLS_LDM32		105	/* PC-rel 32 bit for local dynamic
++					   thread local data */
++#define R_ARM_TLS_LDO32		106	/* 32 bit offset relative to TLS
++					   block */
++#define R_ARM_TLS_IE32		107	/* PC-rel 32 bit for GOT entry of
++					   static TLS block offset */
++#define R_ARM_TLS_LE32		108	/* 32 bit offset relative to static
++					   TLS block */
++#define	R_ARM_THM_TLS_DESCSEQ	129
++#define R_ARM_IRELATIVE		160
++#define R_ARM_RXPC25		249
++#define R_ARM_RSBREL32		250
++#define R_ARM_THM_RPC22		251
++#define R_ARM_RREL32		252
++#define R_ARM_RABS22		253
++#define R_ARM_RPC24		254
++#define R_ARM_RBASE		255
++/* Keep this the last entry.  */
++#define R_ARM_NUM		256
++
++/* IA-64 specific declarations.  */
++
++/* Processor specific flags for the Ehdr e_flags field.  */
++#define EF_IA_64_MASKOS		0x0000000f	/* os-specific flags */
++#define EF_IA_64_ABI64		0x00000010	/* 64-bit ABI */
++#define EF_IA_64_ARCH		0xff000000	/* arch. version mask */
++
++/* Processor specific values for the Phdr p_type field.  */
++#define PT_IA_64_ARCHEXT	(PT_LOPROC + 0)	/* arch extension bits */
++#define PT_IA_64_UNWIND		(PT_LOPROC + 1)	/* ia64 unwind bits */
++#define PT_IA_64_HP_OPT_ANOT	(PT_LOOS + 0x12)
++#define PT_IA_64_HP_HSL_ANOT	(PT_LOOS + 0x13)
++#define PT_IA_64_HP_STACK	(PT_LOOS + 0x14)
++
++/* Processor specific flags for the Phdr p_flags field.  */
++#define PF_IA_64_NORECOV	0x80000000	/* spec insns w/o recovery */
++
++/* Processor specific values for the Shdr sh_type field.  */
++#define SHT_IA_64_EXT		(SHT_LOPROC + 0) /* extension bits */
++#define SHT_IA_64_UNWIND	(SHT_LOPROC + 1) /* unwind bits */
++
++/* Processor specific flags for the Shdr sh_flags field.  */
++#define SHF_IA_64_SHORT		0x10000000	/* section near gp */
++#define SHF_IA_64_NORECOV	0x20000000	/* spec insns w/o recovery */
++
++/* Processor specific values for the Dyn d_tag field.  */
++#define DT_IA_64_PLT_RESERVE	(DT_LOPROC + 0)
++#define DT_IA_64_NUM		1
++
++/* IA-64 relocations.  */
++#define R_IA64_NONE		0x00	/* none */
++#define R_IA64_IMM14		0x21	/* symbol + addend, add imm14 */
++#define R_IA64_IMM22		0x22	/* symbol + addend, add imm22 */
++#define R_IA64_IMM64		0x23	/* symbol + addend, mov imm64 */
++#define R_IA64_DIR32MSB		0x24	/* symbol + addend, data4 MSB */
++#define R_IA64_DIR32LSB		0x25	/* symbol + addend, data4 LSB */
++#define R_IA64_DIR64MSB		0x26	/* symbol + addend, data8 MSB */
++#define R_IA64_DIR64LSB		0x27	/* symbol + addend, data8 LSB */
++#define R_IA64_GPREL22		0x2a	/* @gprel(sym + add), add imm22 */
++#define R_IA64_GPREL64I		0x2b	/* @gprel(sym + add), mov imm64 */
++#define R_IA64_GPREL32MSB	0x2c	/* @gprel(sym + add), data4 MSB */
++#define R_IA64_GPREL32LSB	0x2d	/* @gprel(sym + add), data4 LSB */
++#define R_IA64_GPREL64MSB	0x2e	/* @gprel(sym + add), data8 MSB */
++#define R_IA64_GPREL64LSB	0x2f	/* @gprel(sym + add), data8 LSB */
++#define R_IA64_LTOFF22		0x32	/* @ltoff(sym + add), add imm22 */
++#define R_IA64_LTOFF64I		0x33	/* @ltoff(sym + add), mov imm64 */
++#define R_IA64_PLTOFF22		0x3a	/* @pltoff(sym + add), add imm22 */
++#define R_IA64_PLTOFF64I	0x3b	/* @pltoff(sym + add), mov imm64 */
++#define R_IA64_PLTOFF64MSB	0x3e	/* @pltoff(sym + add), data8 MSB */
++#define R_IA64_PLTOFF64LSB	0x3f	/* @pltoff(sym + add), data8 LSB */
++#define R_IA64_FPTR64I		0x43	/* @fptr(sym + add), mov imm64 */
++#define R_IA64_FPTR32MSB	0x44	/* @fptr(sym + add), data4 MSB */
++#define R_IA64_FPTR32LSB	0x45	/* @fptr(sym + add), data4 LSB */
++#define R_IA64_FPTR64MSB	0x46	/* @fptr(sym + add), data8 MSB */
++#define R_IA64_FPTR64LSB	0x47	/* @fptr(sym + add), data8 LSB */
++#define R_IA64_PCREL60B		0x48	/* @pcrel(sym + add), brl */
++#define R_IA64_PCREL21B		0x49	/* @pcrel(sym + add), ptb, call */
++#define R_IA64_PCREL21M		0x4a	/* @pcrel(sym + add), chk.s */
++#define R_IA64_PCREL21F		0x4b	/* @pcrel(sym + add), fchkf */
++#define R_IA64_PCREL32MSB	0x4c	/* @pcrel(sym + add), data4 MSB */
++#define R_IA64_PCREL32LSB	0x4d	/* @pcrel(sym + add), data4 LSB */
++#define R_IA64_PCREL64MSB	0x4e	/* @pcrel(sym + add), data8 MSB */
++#define R_IA64_PCREL64LSB	0x4f	/* @pcrel(sym + add), data8 LSB */
++#define R_IA64_LTOFF_FPTR22	0x52	/* @ltoff(@fptr(s+a)), imm22 */
++#define R_IA64_LTOFF_FPTR64I	0x53	/* @ltoff(@fptr(s+a)), imm64 */
++#define R_IA64_LTOFF_FPTR32MSB	0x54	/* @ltoff(@fptr(s+a)), data4 MSB */
++#define R_IA64_LTOFF_FPTR32LSB	0x55	/* @ltoff(@fptr(s+a)), data4 LSB */
++#define R_IA64_LTOFF_FPTR64MSB	0x56	/* @ltoff(@fptr(s+a)), data8 MSB */
++#define R_IA64_LTOFF_FPTR64LSB	0x57	/* @ltoff(@fptr(s+a)), data8 LSB */
++#define R_IA64_SEGREL32MSB	0x5c	/* @segrel(sym + add), data4 MSB */
++#define R_IA64_SEGREL32LSB	0x5d	/* @segrel(sym + add), data4 LSB */
++#define R_IA64_SEGREL64MSB	0x5e	/* @segrel(sym + add), data8 MSB */
++#define R_IA64_SEGREL64LSB	0x5f	/* @segrel(sym + add), data8 LSB */
++#define R_IA64_SECREL32MSB	0x64	/* @secrel(sym + add), data4 MSB */
++#define R_IA64_SECREL32LSB	0x65	/* @secrel(sym + add), data4 LSB */
++#define R_IA64_SECREL64MSB	0x66	/* @secrel(sym + add), data8 MSB */
++#define R_IA64_SECREL64LSB	0x67	/* @secrel(sym + add), data8 LSB */
++#define R_IA64_REL32MSB		0x6c	/* data 4 + REL */
++#define R_IA64_REL32LSB		0x6d	/* data 4 + REL */
++#define R_IA64_REL64MSB		0x6e	/* data 8 + REL */
++#define R_IA64_REL64LSB		0x6f	/* data 8 + REL */
++#define R_IA64_LTV32MSB		0x74	/* symbol + addend, data4 MSB */
++#define R_IA64_LTV32LSB		0x75	/* symbol + addend, data4 LSB */
++#define R_IA64_LTV64MSB		0x76	/* symbol + addend, data8 MSB */
++#define R_IA64_LTV64LSB		0x77	/* symbol + addend, data8 LSB */
++#define R_IA64_PCREL21BI	0x79	/* @pcrel(sym + add), 21bit inst */
++#define R_IA64_PCREL22		0x7a	/* @pcrel(sym + add), 22bit inst */
++#define R_IA64_PCREL64I		0x7b	/* @pcrel(sym + add), 64bit inst */
++#define R_IA64_IPLTMSB		0x80	/* dynamic reloc, imported PLT, MSB */
++#define R_IA64_IPLTLSB		0x81	/* dynamic reloc, imported PLT, LSB */
++#define R_IA64_COPY		0x84	/* copy relocation */
++#define R_IA64_SUB		0x85	/* Addend and symbol difference */
++#define R_IA64_LTOFF22X		0x86	/* LTOFF22, relaxable.  */
++#define R_IA64_LDXMOV		0x87	/* Use of LTOFF22X.  */
++#define R_IA64_TPREL14		0x91	/* @tprel(sym + add), imm14 */
++#define R_IA64_TPREL22		0x92	/* @tprel(sym + add), imm22 */
++#define R_IA64_TPREL64I		0x93	/* @tprel(sym + add), imm64 */
++#define R_IA64_TPREL64MSB	0x96	/* @tprel(sym + add), data8 MSB */
++#define R_IA64_TPREL64LSB	0x97	/* @tprel(sym + add), data8 LSB */
++#define R_IA64_LTOFF_TPREL22	0x9a	/* @ltoff(@tprel(s+a)), imm2 */
++#define R_IA64_DTPMOD64MSB	0xa6	/* @dtpmod(sym + add), data8 MSB */
++#define R_IA64_DTPMOD64LSB	0xa7	/* @dtpmod(sym + add), data8 LSB */
++#define R_IA64_LTOFF_DTPMOD22	0xaa	/* @ltoff(@dtpmod(sym + add)), imm22 */
++#define R_IA64_DTPREL14		0xb1	/* @dtprel(sym + add), imm14 */
++#define R_IA64_DTPREL22		0xb2	/* @dtprel(sym + add), imm22 */
++#define R_IA64_DTPREL64I	0xb3	/* @dtprel(sym + add), imm64 */
++#define R_IA64_DTPREL32MSB	0xb4	/* @dtprel(sym + add), data4 MSB */
++#define R_IA64_DTPREL32LSB	0xb5	/* @dtprel(sym + add), data4 LSB */
++#define R_IA64_DTPREL64MSB	0xb6	/* @dtprel(sym + add), data8 MSB */
++#define R_IA64_DTPREL64LSB	0xb7	/* @dtprel(sym + add), data8 LSB */
++#define R_IA64_LTOFF_DTPREL22	0xba	/* @ltoff(@dtprel(s+a)), imm22 */
++
++/* SH specific declarations */
++
++/* Processor specific flags for the ELF header e_flags field.  */
++#define EF_SH_MACH_MASK		0x1f
++#define EF_SH_UNKNOWN		0x0
++#define EF_SH1			0x1
++#define EF_SH2			0x2
++#define EF_SH3			0x3
++#define EF_SH_DSP		0x4
++#define EF_SH3_DSP		0x5
++#define EF_SH4AL_DSP		0x6
++#define EF_SH3E			0x8
++#define EF_SH4			0x9
++#define EF_SH2E			0xb
++#define EF_SH4A			0xc
++#define EF_SH2A			0xd
++#define EF_SH4_NOFPU		0x10
++#define EF_SH4A_NOFPU		0x11
++#define EF_SH4_NOMMU_NOFPU	0x12
++#define EF_SH2A_NOFPU		0x13
++#define EF_SH3_NOMMU		0x14
++#define EF_SH2A_SH4_NOFPU	0x15
++#define EF_SH2A_SH3_NOFPU	0x16
++#define EF_SH2A_SH4		0x17
++#define EF_SH2A_SH3E		0x18
++
++/* SH relocs.  */
++#define	R_SH_NONE		0
++#define	R_SH_DIR32		1
++#define	R_SH_REL32		2
++#define	R_SH_DIR8WPN		3
++#define	R_SH_IND12W		4
++#define	R_SH_DIR8WPL		5
++#define	R_SH_DIR8WPZ		6
++#define	R_SH_DIR8BP		7
++#define	R_SH_DIR8W		8
++#define	R_SH_DIR8L		9
++#define	R_SH_SWITCH16		25
++#define	R_SH_SWITCH32		26
++#define	R_SH_USES		27
++#define	R_SH_COUNT		28
++#define	R_SH_ALIGN		29
++#define	R_SH_CODE		30
++#define	R_SH_DATA		31
++#define	R_SH_LABEL		32
++#define	R_SH_SWITCH8		33
++#define	R_SH_GNU_VTINHERIT	34
++#define	R_SH_GNU_VTENTRY	35
++#define	R_SH_TLS_GD_32		144
++#define	R_SH_TLS_LD_32		145
++#define	R_SH_TLS_LDO_32		146
++#define	R_SH_TLS_IE_32		147
++#define	R_SH_TLS_LE_32		148
++#define	R_SH_TLS_DTPMOD32	149
++#define	R_SH_TLS_DTPOFF32	150
++#define	R_SH_TLS_TPOFF32	151
++#define	R_SH_GOT32		160
++#define	R_SH_PLT32		161
++#define	R_SH_COPY		162
++#define	R_SH_GLOB_DAT		163
++#define	R_SH_JMP_SLOT		164
++#define	R_SH_RELATIVE		165
++#define	R_SH_GOTOFF		166
++#define	R_SH_GOTPC		167
++/* Keep this the last entry.  */
++#define	R_SH_NUM		256
++
++/* S/390 specific definitions.  */
++
++/* Valid values for the e_flags field.  */
++
++#define EF_S390_HIGH_GPRS    0x00000001  /* High GPRs kernel facility needed.  */
++
++/* Additional s390 relocs */
++
++#define R_390_NONE		0	/* No reloc.  */
++#define R_390_8			1	/* Direct 8 bit.  */
++#define R_390_12		2	/* Direct 12 bit.  */
++#define R_390_16		3	/* Direct 16 bit.  */
++#define R_390_32		4	/* Direct 32 bit.  */
++#define R_390_PC32		5	/* PC relative 32 bit.	*/
++#define R_390_GOT12		6	/* 12 bit GOT offset.  */
++#define R_390_GOT32		7	/* 32 bit GOT offset.  */
++#define R_390_PLT32		8	/* 32 bit PC relative PLT address.  */
++#define R_390_COPY		9	/* Copy symbol at runtime.  */
++#define R_390_GLOB_DAT		10	/* Create GOT entry.  */
++#define R_390_JMP_SLOT		11	/* Create PLT entry.  */
++#define R_390_RELATIVE		12	/* Adjust by program base.  */
++#define R_390_GOTOFF32		13	/* 32 bit offset to GOT.	 */
++#define R_390_GOTPC		14	/* 32 bit PC relative offset to GOT.  */
++#define R_390_GOT16		15	/* 16 bit GOT offset.  */
++#define R_390_PC16		16	/* PC relative 16 bit.	*/
++#define R_390_PC16DBL		17	/* PC relative 16 bit shifted by 1.  */
++#define R_390_PLT16DBL		18	/* 16 bit PC rel. PLT shifted by 1.  */
++#define R_390_PC32DBL		19	/* PC relative 32 bit shifted by 1.  */
++#define R_390_PLT32DBL		20	/* 32 bit PC rel. PLT shifted by 1.  */
++#define R_390_GOTPCDBL		21	/* 32 bit PC rel. GOT shifted by 1.  */
++#define R_390_64		22	/* Direct 64 bit.  */
++#define R_390_PC64		23	/* PC relative 64 bit.	*/
++#define R_390_GOT64		24	/* 64 bit GOT offset.  */
++#define R_390_PLT64		25	/* 64 bit PC relative PLT address.  */
++#define R_390_GOTENT		26	/* 32 bit PC rel. to GOT entry >> 1. */
++#define R_390_GOTOFF16		27	/* 16 bit offset to GOT. */
++#define R_390_GOTOFF64		28	/* 64 bit offset to GOT. */
++#define R_390_GOTPLT12		29	/* 12 bit offset to jump slot.	*/
++#define R_390_GOTPLT16		30	/* 16 bit offset to jump slot.	*/
++#define R_390_GOTPLT32		31	/* 32 bit offset to jump slot.	*/
++#define R_390_GOTPLT64		32	/* 64 bit offset to jump slot.	*/
++#define R_390_GOTPLTENT		33	/* 32 bit rel. offset to jump slot.  */
++#define R_390_PLTOFF16		34	/* 16 bit offset from GOT to PLT. */
++#define R_390_PLTOFF32		35	/* 32 bit offset from GOT to PLT. */
++#define R_390_PLTOFF64		36	/* 16 bit offset from GOT to PLT. */
++#define R_390_TLS_LOAD		37	/* Tag for load insn in TLS code.  */
++#define R_390_TLS_GDCALL	38	/* Tag for function call in general
++					   dynamic TLS code. */
++#define R_390_TLS_LDCALL	39	/* Tag for function call in local
++					   dynamic TLS code. */
++#define R_390_TLS_GD32		40	/* Direct 32 bit for general dynamic
++					   thread local data.  */
++#define R_390_TLS_GD64		41	/* Direct 64 bit for general dynamic
++					  thread local data.  */
++#define R_390_TLS_GOTIE12	42	/* 12 bit GOT offset for static TLS
++					   block offset.  */
++#define R_390_TLS_GOTIE32	43	/* 32 bit GOT offset for static TLS
++					   block offset.  */
++#define R_390_TLS_GOTIE64	44	/* 64 bit GOT offset for static TLS
++					   block offset. */
++#define R_390_TLS_LDM32		45	/* Direct 32 bit for local dynamic
++					   thread local data in LE code.  */
++#define R_390_TLS_LDM64		46	/* Direct 64 bit for local dynamic
++					   thread local data in LE code.  */
++#define R_390_TLS_IE32		47	/* 32 bit address of GOT entry for
++					   negated static TLS block offset.  */
++#define R_390_TLS_IE64		48	/* 64 bit address of GOT entry for
++					   negated static TLS block offset.  */
++#define R_390_TLS_IEENT		49	/* 32 bit rel. offset to GOT entry for
++					   negated static TLS block offset.  */
++#define R_390_TLS_LE32		50	/* 32 bit negated offset relative to
++					   static TLS block.  */
++#define R_390_TLS_LE64		51	/* 64 bit negated offset relative to
++					   static TLS block.  */
++#define R_390_TLS_LDO32		52	/* 32 bit offset relative to TLS
++					   block.  */
++#define R_390_TLS_LDO64		53	/* 64 bit offset relative to TLS
++					   block.  */
++#define R_390_TLS_DTPMOD	54	/* ID of module containing symbol.  */
++#define R_390_TLS_DTPOFF	55	/* Offset in TLS block.	 */
++#define R_390_TLS_TPOFF		56	/* Negated offset in static TLS
++					   block.  */
++#define R_390_20		57	/* Direct 20 bit.  */
++#define R_390_GOT20		58	/* 20 bit GOT offset.  */
++#define R_390_GOTPLT20		59	/* 20 bit offset to jump slot.  */
++#define R_390_TLS_GOTIE20	60	/* 20 bit GOT offset for static TLS
++					   block offset.  */
++#define R_390_IRELATIVE         61      /* STT_GNU_IFUNC relocation.  */
++/* Keep this the last entry.  */
++#define R_390_NUM		62
++
++
++/* CRIS relocations.  */
++#define R_CRIS_NONE		0
++#define R_CRIS_8		1
++#define R_CRIS_16		2
++#define R_CRIS_32		3
++#define R_CRIS_8_PCREL		4
++#define R_CRIS_16_PCREL		5
++#define R_CRIS_32_PCREL		6
++#define R_CRIS_GNU_VTINHERIT	7
++#define R_CRIS_GNU_VTENTRY	8
++#define R_CRIS_COPY		9
++#define R_CRIS_GLOB_DAT		10
++#define R_CRIS_JUMP_SLOT	11
++#define R_CRIS_RELATIVE		12
++#define R_CRIS_16_GOT		13
++#define R_CRIS_32_GOT		14
++#define R_CRIS_16_GOTPLT	15
++#define R_CRIS_32_GOTPLT	16
++#define R_CRIS_32_GOTREL	17
++#define R_CRIS_32_PLT_GOTREL	18
++#define R_CRIS_32_PLT_PCREL	19
++
++#define R_CRIS_NUM		20
++
++
++/* AMD x86-64 relocations.  */
++#define R_X86_64_NONE		0	/* No reloc */
++#define R_X86_64_64		1	/* Direct 64 bit  */
++#define R_X86_64_PC32		2	/* PC relative 32 bit signed */
++#define R_X86_64_GOT32		3	/* 32 bit GOT entry */
++#define R_X86_64_PLT32		4	/* 32 bit PLT address */
++#define R_X86_64_COPY		5	/* Copy symbol at runtime */
++#define R_X86_64_GLOB_DAT	6	/* Create GOT entry */
++#define R_X86_64_JUMP_SLOT	7	/* Create PLT entry */
++#define R_X86_64_RELATIVE	8	/* Adjust by program base */
++#define R_X86_64_GOTPCREL	9	/* 32 bit signed PC relative
++					   offset to GOT */
++#define R_X86_64_32		10	/* Direct 32 bit zero extended */
++#define R_X86_64_32S		11	/* Direct 32 bit sign extended */
++#define R_X86_64_16		12	/* Direct 16 bit zero extended */
++#define R_X86_64_PC16		13	/* 16 bit sign extended pc relative */
++#define R_X86_64_8		14	/* Direct 8 bit sign extended  */
++#define R_X86_64_PC8		15	/* 8 bit sign extended pc relative */
++#define R_X86_64_DTPMOD64	16	/* ID of module containing symbol */
++#define R_X86_64_DTPOFF64	17	/* Offset in module's TLS block */
++#define R_X86_64_TPOFF64	18	/* Offset in initial TLS block */
++#define R_X86_64_TLSGD		19	/* 32 bit signed PC relative offset
++					   to two GOT entries for GD symbol */
++#define R_X86_64_TLSLD		20	/* 32 bit signed PC relative offset
++					   to two GOT entries for LD symbol */
++#define R_X86_64_DTPOFF32	21	/* Offset in TLS block */
++#define R_X86_64_GOTTPOFF	22	/* 32 bit signed PC relative offset
++					   to GOT entry for IE symbol */
++#define R_X86_64_TPOFF32	23	/* Offset in initial TLS block */
++#define R_X86_64_PC64		24	/* PC relative 64 bit */
++#define R_X86_64_GOTOFF64	25	/* 64 bit offset to GOT */
++#define R_X86_64_GOTPC32	26	/* 32 bit signed pc relative
++					   offset to GOT */
++#define R_X86_64_GOT64		27	/* 64-bit GOT entry offset */
++#define R_X86_64_GOTPCREL64	28	/* 64-bit PC relative offset
++					   to GOT entry */
++#define R_X86_64_GOTPC64	29	/* 64-bit PC relative offset to GOT */
++#define R_X86_64_GOTPLT64	30 	/* like GOT64, says PLT entry needed */
++#define R_X86_64_PLTOFF64	31	/* 64-bit GOT relative offset
++					   to PLT entry */
++#define R_X86_64_SIZE32		32	/* Size of symbol plus 32-bit addend */
++#define R_X86_64_SIZE64		33	/* Size of symbol plus 64-bit addend */
++#define R_X86_64_GOTPC32_TLSDESC 34	/* GOT offset for TLS descriptor.  */
++#define R_X86_64_TLSDESC_CALL   35	/* Marker for call through TLS
++					   descriptor.  */
++#define R_X86_64_TLSDESC        36	/* TLS descriptor.  */
++#define R_X86_64_IRELATIVE	37	/* Adjust indirectly by program base */
++#define R_X86_64_RELATIVE64	38	/* 64-bit adjust by program base */
++
++#define R_X86_64_NUM		39
++
++
++/* AM33 relocations.  */
++#define R_MN10300_NONE		0	/* No reloc.  */
++#define R_MN10300_32		1	/* Direct 32 bit.  */
++#define R_MN10300_16		2	/* Direct 16 bit.  */
++#define R_MN10300_8		3	/* Direct 8 bit.  */
++#define R_MN10300_PCREL32	4	/* PC-relative 32-bit.  */
++#define R_MN10300_PCREL16	5	/* PC-relative 16-bit signed.  */
++#define R_MN10300_PCREL8	6	/* PC-relative 8-bit signed.  */
++#define R_MN10300_GNU_VTINHERIT	7	/* Ancient C++ vtable garbage... */
++#define R_MN10300_GNU_VTENTRY	8	/* ... collection annotation.  */
++#define R_MN10300_24		9	/* Direct 24 bit.  */
++#define R_MN10300_GOTPC32	10	/* 32-bit PCrel offset to GOT.  */
++#define R_MN10300_GOTPC16	11	/* 16-bit PCrel offset to GOT.  */
++#define R_MN10300_GOTOFF32	12	/* 32-bit offset from GOT.  */
++#define R_MN10300_GOTOFF24	13	/* 24-bit offset from GOT.  */
++#define R_MN10300_GOTOFF16	14	/* 16-bit offset from GOT.  */
++#define R_MN10300_PLT32		15	/* 32-bit PCrel to PLT entry.  */
++#define R_MN10300_PLT16		16	/* 16-bit PCrel to PLT entry.  */
++#define R_MN10300_GOT32		17	/* 32-bit offset to GOT entry.  */
++#define R_MN10300_GOT24		18	/* 24-bit offset to GOT entry.  */
++#define R_MN10300_GOT16		19	/* 16-bit offset to GOT entry.  */
++#define R_MN10300_COPY		20	/* Copy symbol at runtime.  */
++#define R_MN10300_GLOB_DAT	21	/* Create GOT entry.  */
++#define R_MN10300_JMP_SLOT	22	/* Create PLT entry.  */
++#define R_MN10300_RELATIVE	23	/* Adjust by program base.  */
++
++#define R_MN10300_NUM		24
++
++
++/* M32R relocs.  */
++#define R_M32R_NONE		0	/* No reloc. */
++#define R_M32R_16		1	/* Direct 16 bit. */
++#define R_M32R_32		2	/* Direct 32 bit. */
++#define R_M32R_24		3	/* Direct 24 bit. */
++#define R_M32R_10_PCREL		4	/* PC relative 10 bit shifted. */
++#define R_M32R_18_PCREL		5	/* PC relative 18 bit shifted. */
++#define R_M32R_26_PCREL		6	/* PC relative 26 bit shifted. */
++#define R_M32R_HI16_ULO		7	/* High 16 bit with unsigned low. */
++#define R_M32R_HI16_SLO		8	/* High 16 bit with signed low. */
++#define R_M32R_LO16		9	/* Low 16 bit. */
++#define R_M32R_SDA16		10	/* 16 bit offset in SDA. */
++#define R_M32R_GNU_VTINHERIT	11
++#define R_M32R_GNU_VTENTRY	12
++/* M32R relocs use SHT_RELA.  */
++#define R_M32R_16_RELA		33	/* Direct 16 bit. */
++#define R_M32R_32_RELA		34	/* Direct 32 bit. */
++#define R_M32R_24_RELA		35	/* Direct 24 bit. */
++#define R_M32R_10_PCREL_RELA	36	/* PC relative 10 bit shifted. */
++#define R_M32R_18_PCREL_RELA	37	/* PC relative 18 bit shifted. */
++#define R_M32R_26_PCREL_RELA	38	/* PC relative 26 bit shifted. */
++#define R_M32R_HI16_ULO_RELA	39	/* High 16 bit with unsigned low */
++#define R_M32R_HI16_SLO_RELA	40	/* High 16 bit with signed low */
++#define R_M32R_LO16_RELA	41	/* Low 16 bit */
++#define R_M32R_SDA16_RELA	42	/* 16 bit offset in SDA */
++#define R_M32R_RELA_GNU_VTINHERIT	43
++#define R_M32R_RELA_GNU_VTENTRY	44
++#define R_M32R_REL32		45	/* PC relative 32 bit.  */
++
++#define R_M32R_GOT24		48	/* 24 bit GOT entry */
++#define R_M32R_26_PLTREL	49	/* 26 bit PC relative to PLT shifted */
++#define R_M32R_COPY		50	/* Copy symbol at runtime */
++#define R_M32R_GLOB_DAT		51	/* Create GOT entry */
++#define R_M32R_JMP_SLOT		52	/* Create PLT entry */
++#define R_M32R_RELATIVE		53	/* Adjust by program base */
++#define R_M32R_GOTOFF		54	/* 24 bit offset to GOT */
++#define R_M32R_GOTPC24		55	/* 24 bit PC relative offset to GOT */
++#define R_M32R_GOT16_HI_ULO	56	/* High 16 bit GOT entry with unsigned
++					   low */
++#define R_M32R_GOT16_HI_SLO	57	/* High 16 bit GOT entry with signed
++					   low */
++#define R_M32R_GOT16_LO		58	/* Low 16 bit GOT entry */
++#define R_M32R_GOTPC_HI_ULO	59	/* High 16 bit PC relative offset to
++					   GOT with unsigned low */
++#define R_M32R_GOTPC_HI_SLO	60	/* High 16 bit PC relative offset to
++					   GOT with signed low */
++#define R_M32R_GOTPC_LO		61	/* Low 16 bit PC relative offset to
++					   GOT */
++#define R_M32R_GOTOFF_HI_ULO	62	/* High 16 bit offset to GOT
++					   with unsigned low */
++#define R_M32R_GOTOFF_HI_SLO	63	/* High 16 bit offset to GOT
++					   with signed low */
++#define R_M32R_GOTOFF_LO	64	/* Low 16 bit offset to GOT */
++#define R_M32R_NUM		256	/* Keep this the last entry. */
++
++
++/* TILEPro relocations.  */
++#define R_TILEPRO_NONE		0	/* No reloc */
++#define R_TILEPRO_32		1	/* Direct 32 bit */
++#define R_TILEPRO_16		2	/* Direct 16 bit */
++#define R_TILEPRO_8		3	/* Direct 8 bit */
++#define R_TILEPRO_32_PCREL	4	/* PC relative 32 bit */
++#define R_TILEPRO_16_PCREL	5	/* PC relative 16 bit */
++#define R_TILEPRO_8_PCREL	6	/* PC relative 8 bit */
++#define R_TILEPRO_LO16		7	/* Low 16 bit */
++#define R_TILEPRO_HI16		8	/* High 16 bit */
++#define R_TILEPRO_HA16		9	/* High 16 bit, adjusted */
++#define R_TILEPRO_COPY		10	/* Copy relocation */
++#define R_TILEPRO_GLOB_DAT	11	/* Create GOT entry */
++#define R_TILEPRO_JMP_SLOT	12	/* Create PLT entry */
++#define R_TILEPRO_RELATIVE	13	/* Adjust by program base */
++#define R_TILEPRO_BROFF_X1	14	/* X1 pipe branch offset */
++#define R_TILEPRO_JOFFLONG_X1	15	/* X1 pipe jump offset */
++#define R_TILEPRO_JOFFLONG_X1_PLT 16	/* X1 pipe jump offset to PLT */
++#define R_TILEPRO_IMM8_X0	17	/* X0 pipe 8-bit */
++#define R_TILEPRO_IMM8_Y0	18	/* Y0 pipe 8-bit */
++#define R_TILEPRO_IMM8_X1	19	/* X1 pipe 8-bit */
++#define R_TILEPRO_IMM8_Y1	20	/* Y1 pipe 8-bit */
++#define R_TILEPRO_MT_IMM15_X1	21	/* X1 pipe mtspr */
++#define R_TILEPRO_MF_IMM15_X1	22	/* X1 pipe mfspr */
++#define R_TILEPRO_IMM16_X0	23	/* X0 pipe 16-bit */
++#define R_TILEPRO_IMM16_X1	24	/* X1 pipe 16-bit */
++#define R_TILEPRO_IMM16_X0_LO	25	/* X0 pipe low 16-bit */
++#define R_TILEPRO_IMM16_X1_LO	26	/* X1 pipe low 16-bit */
++#define R_TILEPRO_IMM16_X0_HI	27	/* X0 pipe high 16-bit */
++#define R_TILEPRO_IMM16_X1_HI	28	/* X1 pipe high 16-bit */
++#define R_TILEPRO_IMM16_X0_HA	29	/* X0 pipe high 16-bit, adjusted */
++#define R_TILEPRO_IMM16_X1_HA	30	/* X1 pipe high 16-bit, adjusted */
++#define R_TILEPRO_IMM16_X0_PCREL 31	/* X0 pipe PC relative 16 bit */
++#define R_TILEPRO_IMM16_X1_PCREL 32	/* X1 pipe PC relative 16 bit */
++#define R_TILEPRO_IMM16_X0_LO_PCREL 33	/* X0 pipe PC relative low 16 bit */
++#define R_TILEPRO_IMM16_X1_LO_PCREL 34	/* X1 pipe PC relative low 16 bit */
++#define R_TILEPRO_IMM16_X0_HI_PCREL 35	/* X0 pipe PC relative high 16 bit */
++#define R_TILEPRO_IMM16_X1_HI_PCREL 36	/* X1 pipe PC relative high 16 bit */
++#define R_TILEPRO_IMM16_X0_HA_PCREL 37	/* X0 pipe PC relative ha() 16 bit */
++#define R_TILEPRO_IMM16_X1_HA_PCREL 38	/* X1 pipe PC relative ha() 16 bit */
++#define R_TILEPRO_IMM16_X0_GOT	39	/* X0 pipe 16-bit GOT offset */
++#define R_TILEPRO_IMM16_X1_GOT	40	/* X1 pipe 16-bit GOT offset */
++#define R_TILEPRO_IMM16_X0_GOT_LO 41	/* X0 pipe low 16-bit GOT offset */
++#define R_TILEPRO_IMM16_X1_GOT_LO 42	/* X1 pipe low 16-bit GOT offset */
++#define R_TILEPRO_IMM16_X0_GOT_HI 43	/* X0 pipe high 16-bit GOT offset */
++#define R_TILEPRO_IMM16_X1_GOT_HI 44	/* X1 pipe high 16-bit GOT offset */
++#define R_TILEPRO_IMM16_X0_GOT_HA 45	/* X0 pipe ha() 16-bit GOT offset */
++#define R_TILEPRO_IMM16_X1_GOT_HA 46	/* X1 pipe ha() 16-bit GOT offset */
++#define R_TILEPRO_MMSTART_X0	47	/* X0 pipe mm "start" */
++#define R_TILEPRO_MMEND_X0	48	/* X0 pipe mm "end" */
++#define R_TILEPRO_MMSTART_X1	49	/* X1 pipe mm "start" */
++#define R_TILEPRO_MMEND_X1	50	/* X1 pipe mm "end" */
++#define R_TILEPRO_SHAMT_X0	51	/* X0 pipe shift amount */
++#define R_TILEPRO_SHAMT_X1	52	/* X1 pipe shift amount */
++#define R_TILEPRO_SHAMT_Y0	53	/* Y0 pipe shift amount */
++#define R_TILEPRO_SHAMT_Y1	54	/* Y1 pipe shift amount */
++#define R_TILEPRO_DEST_IMM8_X1	55	/* X1 pipe destination 8-bit */
++/* Relocs 56-59 are currently not defined.  */
++#define R_TILEPRO_TLS_GD_CALL	60	/* "jal" for TLS GD */
++#define R_TILEPRO_IMM8_X0_TLS_GD_ADD 61	/* X0 pipe "addi" for TLS GD */
++#define R_TILEPRO_IMM8_X1_TLS_GD_ADD 62	/* X1 pipe "addi" for TLS GD */
++#define R_TILEPRO_IMM8_Y0_TLS_GD_ADD 63	/* Y0 pipe "addi" for TLS GD */
++#define R_TILEPRO_IMM8_Y1_TLS_GD_ADD 64	/* Y1 pipe "addi" for TLS GD */
++#define R_TILEPRO_TLS_IE_LOAD	65	/* "lw_tls" for TLS IE */
++#define R_TILEPRO_IMM16_X0_TLS_GD 66	/* X0 pipe 16-bit TLS GD offset */
++#define R_TILEPRO_IMM16_X1_TLS_GD 67	/* X1 pipe 16-bit TLS GD offset */
++#define R_TILEPRO_IMM16_X0_TLS_GD_LO 68	/* X0 pipe low 16-bit TLS GD offset */
++#define R_TILEPRO_IMM16_X1_TLS_GD_LO 69	/* X1 pipe low 16-bit TLS GD offset */
++#define R_TILEPRO_IMM16_X0_TLS_GD_HI 70	/* X0 pipe high 16-bit TLS GD offset */
++#define R_TILEPRO_IMM16_X1_TLS_GD_HI 71	/* X1 pipe high 16-bit TLS GD offset */
++#define R_TILEPRO_IMM16_X0_TLS_GD_HA 72	/* X0 pipe ha() 16-bit TLS GD offset */
++#define R_TILEPRO_IMM16_X1_TLS_GD_HA 73	/* X1 pipe ha() 16-bit TLS GD offset */
++#define R_TILEPRO_IMM16_X0_TLS_IE 74	/* X0 pipe 16-bit TLS IE offset */
++#define R_TILEPRO_IMM16_X1_TLS_IE 75	/* X1 pipe 16-bit TLS IE offset */
++#define R_TILEPRO_IMM16_X0_TLS_IE_LO 76	/* X0 pipe low 16-bit TLS IE offset */
++#define R_TILEPRO_IMM16_X1_TLS_IE_LO 77	/* X1 pipe low 16-bit TLS IE offset */
++#define R_TILEPRO_IMM16_X0_TLS_IE_HI 78	/* X0 pipe high 16-bit TLS IE offset */
++#define R_TILEPRO_IMM16_X1_TLS_IE_HI 79	/* X1 pipe high 16-bit TLS IE offset */
++#define R_TILEPRO_IMM16_X0_TLS_IE_HA 80	/* X0 pipe ha() 16-bit TLS IE offset */
++#define R_TILEPRO_IMM16_X1_TLS_IE_HA 81	/* X1 pipe ha() 16-bit TLS IE offset */
++#define R_TILEPRO_TLS_DTPMOD32	82	/* ID of module containing symbol */
++#define R_TILEPRO_TLS_DTPOFF32	83	/* Offset in TLS block */
++#define R_TILEPRO_TLS_TPOFF32	84	/* Offset in static TLS block */
++#define R_TILEPRO_IMM16_X0_TLS_LE 85	/* X0 pipe 16-bit TLS LE offset */
++#define R_TILEPRO_IMM16_X1_TLS_LE 86	/* X1 pipe 16-bit TLS LE offset */
++#define R_TILEPRO_IMM16_X0_TLS_LE_LO 87	/* X0 pipe low 16-bit TLS LE offset */
++#define R_TILEPRO_IMM16_X1_TLS_LE_LO 88	/* X1 pipe low 16-bit TLS LE offset */
++#define R_TILEPRO_IMM16_X0_TLS_LE_HI 89	/* X0 pipe high 16-bit TLS LE offset */
++#define R_TILEPRO_IMM16_X1_TLS_LE_HI 90	/* X1 pipe high 16-bit TLS LE offset */
++#define R_TILEPRO_IMM16_X0_TLS_LE_HA 91	/* X0 pipe ha() 16-bit TLS LE offset */
++#define R_TILEPRO_IMM16_X1_TLS_LE_HA 92	/* X1 pipe ha() 16-bit TLS LE offset */
++
++#define R_TILEPRO_GNU_VTINHERIT	128	/* GNU C++ vtable hierarchy */
++#define R_TILEPRO_GNU_VTENTRY	129	/* GNU C++ vtable member usage */
++
++#define R_TILEPRO_NUM		130
++
++
++/* TILE-Gx relocations.  */
++#define R_TILEGX_NONE		0	/* No reloc */
++#define R_TILEGX_64		1	/* Direct 64 bit */
++#define R_TILEGX_32		2	/* Direct 32 bit */
++#define R_TILEGX_16		3	/* Direct 16 bit */
++#define R_TILEGX_8		4	/* Direct 8 bit */
++#define R_TILEGX_64_PCREL	5	/* PC relative 64 bit */
++#define R_TILEGX_32_PCREL	6	/* PC relative 32 bit */
++#define R_TILEGX_16_PCREL	7	/* PC relative 16 bit */
++#define R_TILEGX_8_PCREL	8	/* PC relative 8 bit */
++#define R_TILEGX_HW0		9	/* hword 0 16-bit */
++#define R_TILEGX_HW1		10	/* hword 1 16-bit */
++#define R_TILEGX_HW2		11	/* hword 2 16-bit */
++#define R_TILEGX_HW3		12	/* hword 3 16-bit */
++#define R_TILEGX_HW0_LAST	13	/* last hword 0 16-bit */
++#define R_TILEGX_HW1_LAST	14	/* last hword 1 16-bit */
++#define R_TILEGX_HW2_LAST	15	/* last hword 2 16-bit */
++#define R_TILEGX_COPY		16	/* Copy relocation */
++#define R_TILEGX_GLOB_DAT	17	/* Create GOT entry */
++#define R_TILEGX_JMP_SLOT	18	/* Create PLT entry */
++#define R_TILEGX_RELATIVE	19	/* Adjust by program base */
++#define R_TILEGX_BROFF_X1	20	/* X1 pipe branch offset */
++#define R_TILEGX_JUMPOFF_X1	21	/* X1 pipe jump offset */
++#define R_TILEGX_JUMPOFF_X1_PLT	22	/* X1 pipe jump offset to PLT */
++#define R_TILEGX_IMM8_X0	23	/* X0 pipe 8-bit */
++#define R_TILEGX_IMM8_Y0	24	/* Y0 pipe 8-bit */
++#define R_TILEGX_IMM8_X1	25	/* X1 pipe 8-bit */
++#define R_TILEGX_IMM8_Y1	26	/* Y1 pipe 8-bit */
++#define R_TILEGX_DEST_IMM8_X1	27	/* X1 pipe destination 8-bit */
++#define R_TILEGX_MT_IMM14_X1	28	/* X1 pipe mtspr */
++#define R_TILEGX_MF_IMM14_X1	29	/* X1 pipe mfspr */
++#define R_TILEGX_MMSTART_X0	30	/* X0 pipe mm "start" */
++#define R_TILEGX_MMEND_X0	31	/* X0 pipe mm "end" */
++#define R_TILEGX_SHAMT_X0	32	/* X0 pipe shift amount */
++#define R_TILEGX_SHAMT_X1	33	/* X1 pipe shift amount */
++#define R_TILEGX_SHAMT_Y0	34	/* Y0 pipe shift amount */
++#define R_TILEGX_SHAMT_Y1	35	/* Y1 pipe shift amount */
++#define R_TILEGX_IMM16_X0_HW0	36	/* X0 pipe hword 0 */
++#define R_TILEGX_IMM16_X1_HW0	37	/* X1 pipe hword 0 */
++#define R_TILEGX_IMM16_X0_HW1	38	/* X0 pipe hword 1 */
++#define R_TILEGX_IMM16_X1_HW1	39	/* X1 pipe hword 1 */
++#define R_TILEGX_IMM16_X0_HW2	40	/* X0 pipe hword 2 */
++#define R_TILEGX_IMM16_X1_HW2	41	/* X1 pipe hword 2 */
++#define R_TILEGX_IMM16_X0_HW3	42	/* X0 pipe hword 3 */
++#define R_TILEGX_IMM16_X1_HW3	43	/* X1 pipe hword 3 */
++#define R_TILEGX_IMM16_X0_HW0_LAST 44	/* X0 pipe last hword 0 */
++#define R_TILEGX_IMM16_X1_HW0_LAST 45	/* X1 pipe last hword 0 */
++#define R_TILEGX_IMM16_X0_HW1_LAST 46	/* X0 pipe last hword 1 */
++#define R_TILEGX_IMM16_X1_HW1_LAST 47	/* X1 pipe last hword 1 */
++#define R_TILEGX_IMM16_X0_HW2_LAST 48	/* X0 pipe last hword 2 */
++#define R_TILEGX_IMM16_X1_HW2_LAST 49	/* X1 pipe last hword 2 */
++#define R_TILEGX_IMM16_X0_HW0_PCREL 50	/* X0 pipe PC relative hword 0 */
++#define R_TILEGX_IMM16_X1_HW0_PCREL 51	/* X1 pipe PC relative hword 0 */
++#define R_TILEGX_IMM16_X0_HW1_PCREL 52	/* X0 pipe PC relative hword 1 */
++#define R_TILEGX_IMM16_X1_HW1_PCREL 53	/* X1 pipe PC relative hword 1 */
++#define R_TILEGX_IMM16_X0_HW2_PCREL 54	/* X0 pipe PC relative hword 2 */
++#define R_TILEGX_IMM16_X1_HW2_PCREL 55	/* X1 pipe PC relative hword 2 */
++#define R_TILEGX_IMM16_X0_HW3_PCREL 56	/* X0 pipe PC relative hword 3 */
++#define R_TILEGX_IMM16_X1_HW3_PCREL 57	/* X1 pipe PC relative hword 3 */
++#define R_TILEGX_IMM16_X0_HW0_LAST_PCREL 58 /* X0 pipe PC-rel last hword 0 */
++#define R_TILEGX_IMM16_X1_HW0_LAST_PCREL 59 /* X1 pipe PC-rel last hword 0 */
++#define R_TILEGX_IMM16_X0_HW1_LAST_PCREL 60 /* X0 pipe PC-rel last hword 1 */
++#define R_TILEGX_IMM16_X1_HW1_LAST_PCREL 61 /* X1 pipe PC-rel last hword 1 */
++#define R_TILEGX_IMM16_X0_HW2_LAST_PCREL 62 /* X0 pipe PC-rel last hword 2 */
++#define R_TILEGX_IMM16_X1_HW2_LAST_PCREL 63 /* X1 pipe PC-rel last hword 2 */
++#define R_TILEGX_IMM16_X0_HW0_GOT 64	/* X0 pipe hword 0 GOT offset */
++#define R_TILEGX_IMM16_X1_HW0_GOT 65	/* X1 pipe hword 0 GOT offset */
++/* Relocs 66-71 are currently not defined.  */
++#define R_TILEGX_IMM16_X0_HW0_LAST_GOT 72 /* X0 pipe last hword 0 GOT offset */
++#define R_TILEGX_IMM16_X1_HW0_LAST_GOT 73 /* X1 pipe last hword 0 GOT offset */
++#define R_TILEGX_IMM16_X0_HW1_LAST_GOT 74 /* X0 pipe last hword 1 GOT offset */
++#define R_TILEGX_IMM16_X1_HW1_LAST_GOT 75 /* X1 pipe last hword 1 GOT offset */
++/* Relocs 76-77 are currently not defined.  */
++#define R_TILEGX_IMM16_X0_HW0_TLS_GD 78	/* X0 pipe hword 0 TLS GD offset */
++#define R_TILEGX_IMM16_X1_HW0_TLS_GD 79	/* X1 pipe hword 0 TLS GD offset */
++#define R_TILEGX_IMM16_X0_HW0_TLS_LE 80	/* X0 pipe hword 0 TLS LE offset */
++#define R_TILEGX_IMM16_X1_HW0_TLS_LE 81	/* X1 pipe hword 0 TLS LE offset */
++#define R_TILEGX_IMM16_X0_HW0_LAST_TLS_LE 82 /* X0 pipe last hword 0 LE off */
++#define R_TILEGX_IMM16_X1_HW0_LAST_TLS_LE 83 /* X1 pipe last hword 0 LE off */
++#define R_TILEGX_IMM16_X0_HW1_LAST_TLS_LE 84 /* X0 pipe last hword 1 LE off */
++#define R_TILEGX_IMM16_X1_HW1_LAST_TLS_LE 85 /* X1 pipe last hword 1 LE off */
++#define R_TILEGX_IMM16_X0_HW0_LAST_TLS_GD 86 /* X0 pipe last hword 0 GD off */
++#define R_TILEGX_IMM16_X1_HW0_LAST_TLS_GD 87 /* X1 pipe last hword 0 GD off */
++#define R_TILEGX_IMM16_X0_HW1_LAST_TLS_GD 88 /* X0 pipe last hword 1 GD off */
++#define R_TILEGX_IMM16_X1_HW1_LAST_TLS_GD 89 /* X1 pipe last hword 1 GD off */
++/* Relocs 90-91 are currently not defined.  */
++#define R_TILEGX_IMM16_X0_HW0_TLS_IE 92	/* X0 pipe hword 0 TLS IE offset */
++#define R_TILEGX_IMM16_X1_HW0_TLS_IE 93	/* X1 pipe hword 0 TLS IE offset */
++/* Relocs 94-99 are currently not defined.  */
++#define R_TILEGX_IMM16_X0_HW0_LAST_TLS_IE 100 /* X0 pipe last hword 0 IE off */
++#define R_TILEGX_IMM16_X1_HW0_LAST_TLS_IE 101 /* X1 pipe last hword 0 IE off */
++#define R_TILEGX_IMM16_X0_HW1_LAST_TLS_IE 102 /* X0 pipe last hword 1 IE off */
++#define R_TILEGX_IMM16_X1_HW1_LAST_TLS_IE 103 /* X1 pipe last hword 1 IE off */
++/* Relocs 104-105 are currently not defined.  */
++#define R_TILEGX_TLS_DTPMOD64	106	/* 64-bit ID of symbol's module */
++#define R_TILEGX_TLS_DTPOFF64	107	/* 64-bit offset in TLS block */
++#define R_TILEGX_TLS_TPOFF64	108	/* 64-bit offset in static TLS block */
++#define R_TILEGX_TLS_DTPMOD32	109	/* 32-bit ID of symbol's module */
++#define R_TILEGX_TLS_DTPOFF32	110	/* 32-bit offset in TLS block */
++#define R_TILEGX_TLS_TPOFF32	111	/* 32-bit offset in static TLS block */
++#define R_TILEGX_TLS_GD_CALL	112	/* "jal" for TLS GD */
++#define R_TILEGX_IMM8_X0_TLS_GD_ADD 113	/* X0 pipe "addi" for TLS GD */
++#define R_TILEGX_IMM8_X1_TLS_GD_ADD 114	/* X1 pipe "addi" for TLS GD */
++#define R_TILEGX_IMM8_Y0_TLS_GD_ADD 115	/* Y0 pipe "addi" for TLS GD */
++#define R_TILEGX_IMM8_Y1_TLS_GD_ADD 116	/* Y1 pipe "addi" for TLS GD */
++#define R_TILEGX_TLS_IE_LOAD	117	/* "ld_tls" for TLS IE */
++#define R_TILEGX_IMM8_X0_TLS_ADD 118	/* X0 pipe "addi" for TLS GD/IE */
++#define R_TILEGX_IMM8_X1_TLS_ADD 119	/* X1 pipe "addi" for TLS GD/IE */
++#define R_TILEGX_IMM8_Y0_TLS_ADD 120	/* Y0 pipe "addi" for TLS GD/IE */
++#define R_TILEGX_IMM8_Y1_TLS_ADD 121	/* Y1 pipe "addi" for TLS GD/IE */
++
++#define R_TILEGX_GNU_VTINHERIT	128	/* GNU C++ vtable hierarchy */
++#define R_TILEGX_GNU_VTENTRY	129	/* GNU C++ vtable member usage */
++
++#define R_TILEGX_NUM		130
++
++#endif	/* elf.h */
+--- a/scripts/mod/mk_elfconfig.c
++++ b/scripts/mod/mk_elfconfig.c
+@@ -2,7 +2,11 @@
+ #include <stdio.h>
+ #include <stdlib.h>
+ #include <string.h>
++#ifndef __APPLE__
+ #include <elf.h>
++#else
++#include "elf.h"
++#endif
+ 
+ int
+ main(int argc, char **argv)
+--- a/scripts/mod/modpost.h
++++ b/scripts/mod/modpost.h
+@@ -8,7 +8,11 @@
+ #include <sys/mman.h>
+ #include <fcntl.h>
+ #include <unistd.h>
++#if !(defined(__APPLE__) || defined(__CYGWIN__))
+ #include <elf.h>
++#else
++#include "elf.h"
++#endif
+ 
+ #include "elfconfig.h"
+ 
diff --git a/target/linux/generic/hack-5.4/212-byteshift_portability.patch b/target/linux/generic/hack-5.4/212-byteshift_portability.patch
new file mode 100644
index 0000000000..1a5ac87988
--- /dev/null
+++ b/target/linux/generic/hack-5.4/212-byteshift_portability.patch
@@ -0,0 +1,65 @@
+From 48232d3d931c95953ce2ddfe7da7bb164aef6a73 Mon Sep 17 00:00:00 2001
+From: Felix Fietkau <nbd@nbd.name>
+Date: Fri, 7 Jul 2017 17:03:16 +0200
+Subject: linux-3.6: fix portability of some includes files in tools/ used on the host
+
+lede-commit: 6040b1d29ab1f047c5e49b748abcb6a3196add28
+Signed-off-by: Felix Fietkau <nbd@nbd.name>
+---
+ tools/include/tools/be_byteshift.h |  4 ++++
+ tools/include/tools/le_byteshift.h |  4 ++++
+ tools/include/tools/linux_types.h  | 22 ++++++++++++++++++++++
+ 3 files changed, 30 insertions(+)
+ create mode 100644 tools/include/tools/linux_types.h
+
+--- a/tools/include/tools/be_byteshift.h
++++ b/tools/include/tools/be_byteshift.h
+@@ -2,6 +2,10 @@
+ #ifndef _TOOLS_BE_BYTESHIFT_H
+ #define _TOOLS_BE_BYTESHIFT_H
+ 
++#ifndef __linux__
++#include "linux_types.h"
++#endif
++
+ #include <stdint.h>
+ 
+ static inline uint16_t __get_unaligned_be16(const uint8_t *p)
+--- a/tools/include/tools/le_byteshift.h
++++ b/tools/include/tools/le_byteshift.h
+@@ -2,6 +2,10 @@
+ #ifndef _TOOLS_LE_BYTESHIFT_H
+ #define _TOOLS_LE_BYTESHIFT_H
+ 
++#ifndef __linux__
++#include "linux_types.h"
++#endif
++
+ #include <stdint.h>
+ 
+ static inline uint16_t __get_unaligned_le16(const uint8_t *p)
+--- /dev/null
++++ b/tools/include/tools/linux_types.h
+@@ -0,0 +1,22 @@
++#ifndef __LINUX_TYPES_H
++#define __LINUX_TYPES_H
++
++#include <stdint.h>
++
++typedef uint8_t __u8;
++typedef uint8_t __be8;
++typedef uint8_t __le8;
++
++typedef uint16_t __u16;
++typedef uint16_t __be16;
++typedef uint16_t __le16;
++
++typedef uint32_t __u32;
++typedef uint32_t __be32;
++typedef uint32_t __le32;
++
++typedef uint64_t __u64;
++typedef uint64_t __be64;
++typedef uint64_t __le64;
++
++#endif
diff --git a/target/linux/generic/hack-5.4/214-spidev_h_portability.patch b/target/linux/generic/hack-5.4/214-spidev_h_portability.patch
new file mode 100644
index 0000000000..093f600c85
--- /dev/null
+++ b/target/linux/generic/hack-5.4/214-spidev_h_portability.patch
@@ -0,0 +1,24 @@
+From be9be95ff10e16a5b4ad36f903978d0cc5747024 Mon Sep 17 00:00:00 2001
+From: Felix Fietkau <nbd@nbd.name>
+Date: Fri, 7 Jul 2017 17:04:08 +0200
+Subject: kernel: fix linux/spi/spidev.h portability issues with musl
+
+Felix will try to get this define included into musl
+
+lede-commit: 795e7cf60de19e7a076a46874fab7bb88b43bbff
+Signed-off-by: Felix Fietkau <nbd@nbd.name>
+---
+ include/uapi/linux/spi/spidev.h | 2 +-
+ 1 file changed, 1 insertion(+), 1 deletion(-)
+
+--- a/include/uapi/linux/spi/spidev.h
++++ b/include/uapi/linux/spi/spidev.h
+@@ -113,7 +113,7 @@ struct spi_ioc_transfer {
+ 
+ /* not all platforms use <asm-generic/ioctl.h> or _IOC_TYPECHECK() ... */
+ #define SPI_MSGSIZE(N) \
+-	((((N)*(sizeof (struct spi_ioc_transfer))) < (1 << _IOC_SIZEBITS)) \
++	((((N)*(sizeof (struct spi_ioc_transfer))) < (1 << 13)) \
+ 		? ((N)*(sizeof (struct spi_ioc_transfer))) : 0)
+ #define SPI_IOC_MESSAGE(N) _IOW(SPI_IOC_MAGIC, 0, char[SPI_MSGSIZE(N)])
+ 
diff --git a/target/linux/generic/hack-5.4/220-gc_sections.patch b/target/linux/generic/hack-5.4/220-gc_sections.patch
new file mode 100644
index 0000000000..77422e821b
--- /dev/null
+++ b/target/linux/generic/hack-5.4/220-gc_sections.patch
@@ -0,0 +1,192 @@
+From e3d8676f5722b7622685581e06e8f53e6138e3ab Mon Sep 17 00:00:00 2001
+From: Felix Fietkau <nbd@nbd.name>
+Date: Sat, 15 Jul 2017 23:42:36 +0200
+Subject: use -ffunction-sections, -fdata-sections and --gc-sections
+
+In combination with kernel symbol export stripping this significantly reduces
+the kernel image size. Used on both ARM and MIPS architectures.
+
+Signed-off-by: Felix Fietkau <nbd@nbd.name>
+Signed-off-by: Jonas Gorski <jogo@openwrt.org>
+Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
+---
+ Makefile                          | 10 +++----
+ arch/arm/Kconfig                  |  1 +
+ arch/arm/boot/compressed/Makefile |  1 +
+ arch/arm/kernel/vmlinux.lds.S     | 26 ++++++++--------
+ arch/mips/Kconfig                 |  1 +
+ arch/mips/kernel/vmlinux.lds.S    |  4 +--
+ include/asm-generic/vmlinux.lds.h | 63 ++++++++++++++++++++-------------------
+ 7 files changed, 55 insertions(+), 51 deletions(-)
+
+--- a/Makefile
++++ b/Makefile
+@@ -294,6 +294,11 @@ else
+ scripts/Kbuild.include: ;
+ include scripts/Kbuild.include
+ 
++ifdef CONFIG_LD_DEAD_CODE_DATA_ELIMINATION
++KBUILD_CFLAGS_KERNEL += -ffunction-sections -fdata-sections
++LDFLAGS_vmlinux += --gc-sections
++endif
++
+ # Read KERNELRELEASE from include/config/kernel.release (if it exists)
+ KERNELRELEASE = $(shell cat include/config/kernel.release 2> /dev/null)
+ KERNELVERSION = $(VERSION)$(if $(PATCHLEVEL),.$(PATCHLEVEL)$(if $(SUBLEVEL),.$(SUBLEVEL)))$(EXTRAVERSION)
+@@ -782,11 +787,6 @@ ifdef CONFIG_DEBUG_SECTION_MISMATCH
+ KBUILD_CFLAGS += $(call cc-option, -fno-inline-functions-called-once)
+ endif
+ 
+-ifdef CONFIG_LD_DEAD_CODE_DATA_ELIMINATION
+-KBUILD_CFLAGS_KERNEL += -ffunction-sections -fdata-sections
+-LDFLAGS_vmlinux += --gc-sections
+-endif
+-
+ # arch Makefile may override CC so keep this after arch Makefile is included
+ NOSTDINC_FLAGS += -nostdinc -isystem $(shell $(CC) -print-file-name=include)
+ 
+--- a/arch/arm/Kconfig
++++ b/arch/arm/Kconfig
+@@ -98,6 +98,7 @@ config ARM
+ 	select HAVE_UID16
+ 	select HAVE_VIRT_CPU_ACCOUNTING_GEN
+ 	select IRQ_FORCED_THREADING
++	select HAVE_LD_DEAD_CODE_DATA_ELIMINATION
+ 	select MODULES_USE_ELF_REL
+ 	select NEED_DMA_MAP_STATE
+ 	select NO_BOOTMEM
+--- a/arch/arm/boot/compressed/Makefile
++++ b/arch/arm/boot/compressed/Makefile
+@@ -106,6 +106,7 @@ ifeq ($(CONFIG_FUNCTION_TRACER),y)
+ ORIG_CFLAGS := $(KBUILD_CFLAGS)
+ KBUILD_CFLAGS = $(subst -pg, , $(ORIG_CFLAGS))
+ endif
++KBUILD_CFLAGS_KERNEL := $(patsubst -f%-sections,,$(KBUILD_CFLAGS_KERNEL))
+ 
+ # -fstack-protector-strong triggers protection checks in this code,
+ # but it is being used too early to link to meaningful stack_chk logic.
+--- a/arch/arm/kernel/vmlinux.lds.S
++++ b/arch/arm/kernel/vmlinux.lds.S
+@@ -100,24 +100,24 @@ SECTIONS
+ 	}
+ 	.init.arch.info : {
+ 		__arch_info_begin = .;
+-		*(.arch.info.init)
++		KEEP(*(.arch.info.init))
+ 		__arch_info_end = .;
+ 	}
+ 	.init.tagtable : {
+ 		__tagtable_begin = .;
+-		*(.taglist.init)
++		KEEP(*(.taglist.init))
+ 		__tagtable_end = .;
+ 	}
+ #ifdef CONFIG_SMP_ON_UP
+ 	.init.smpalt : {
+ 		__smpalt_begin = .;
+-		*(.alt.smp.init)
++		KEEP(*(.alt.smp.init))
+ 		__smpalt_end = .;
+ 	}
+ #endif
+ 	.init.pv_table : {
+ 		__pv_table_begin = .;
+-		*(.pv_table)
++		KEEP(*(.pv_table))
+ 		__pv_table_end = .;
+ 	}
+ 
+--- a/arch/arm/kernel/vmlinux.lds.h
++++ b/arch/arm/kernel/vmlinux.lds.h
+@@ -22,13 +22,13 @@
+ #define ARM_MMU_DISCARD(x)
+ #else
+ #define ARM_MMU_KEEP(x)
+-#define ARM_MMU_DISCARD(x)	x
++#define ARM_MMU_DISCARD(x)	KEEP(x)
+ #endif
+ 
+ #define PROC_INFO							\
+ 		. = ALIGN(4);						\
+ 		__proc_info_begin = .;					\
+-		*(.proc.info.init)					\
++		KEEP(*(.proc.info.init))				\
+ 		__proc_info_end = .;
+ 
+ #define HYPERVISOR_TEXT							\
+@@ -39,11 +39,11 @@
+ #define IDMAP_TEXT							\
+ 		ALIGN_FUNCTION();					\
+ 		__idmap_text_start = .;					\
+-		*(.idmap.text)						\
++		KEEP(*(.idmap.text))					\
+ 		__idmap_text_end = .;					\
+ 		. = ALIGN(PAGE_SIZE);					\
+ 		__hyp_idmap_text_start = .;				\
+-		*(.hyp.idmap.text)					\
++		KEEP(*(.hyp.idmap.text))				\
+ 		__hyp_idmap_text_end = .;
+ 
+ #define ARM_DISCARD							\
+@@ -86,12 +86,12 @@
+ 	. = ALIGN(8);							\
+ 	.ARM.unwind_idx : {						\
+ 		__start_unwind_idx = .;					\
+-		*(.ARM.exidx*)						\
++		KEEP(*(.ARM.exidx*))					\
+ 		__stop_unwind_idx = .;					\
+ 	}								\
+ 	.ARM.unwind_tab : {						\
+ 		__start_unwind_tab = .;					\
+-		*(.ARM.extab*)						\
++		KEEP(*(.ARM.extab*))					\
+ 		__stop_unwind_tab = .;					\
+ 	}
+ 
+@@ -102,14 +102,14 @@
+ #define ARM_VECTORS							\
+ 	__vectors_start = .;						\
+ 	.vectors 0xffff0000 : AT(__vectors_start) {			\
+-		*(.vectors)						\
++		KEEP(*(.vectors))					\
+ 	}								\
+ 	. = __vectors_start + SIZEOF(.vectors);				\
+ 	__vectors_end = .;						\
+ 									\
+ 	__stubs_start = .;						\
+ 	.stubs ADDR(.vectors) + 0x1000 : AT(__stubs_start) {		\
+-		*(.stubs)						\
++		KEEP(*(.stubs))						\
+ 	}								\
+ 	. = __stubs_start + SIZEOF(.stubs);				\
+ 	__stubs_end = .;						\
+--- a/arch/mips/Kconfig
++++ b/arch/mips/Kconfig
+@@ -43,6 +43,7 @@ config MIPS
+ 	select HAVE_ARCH_TRANSPARENT_HUGEPAGE if CPU_SUPPORTS_HUGEPAGES && 64BIT
+ 	select HAVE_CBPF_JIT if (!64BIT && !CPU_MICROMIPS)
+ 	select HAVE_EBPF_JIT if (64BIT && !CPU_MICROMIPS)
++	select HAVE_LD_DEAD_CODE_DATA_ELIMINATION
+ 	select HAVE_CONTEXT_TRACKING
+ 	select HAVE_COPY_THREAD_TLS
+ 	select HAVE_C_RECORDMCOUNT
+--- a/arch/mips/kernel/vmlinux.lds.S
++++ b/arch/mips/kernel/vmlinux.lds.S
+@@ -72,7 +72,7 @@ SECTIONS
+ 	/* Exception table for data bus errors */
+ 	__dbe_table : {
+ 		__start___dbe_table = .;
+-		*(__dbe_table)
++		KEEP(*(__dbe_table))
+ 		__stop___dbe_table = .;
+ 	}
+ 
+@@ -123,7 +123,7 @@ SECTIONS
+ 	. = ALIGN(4);
+ 	.mips.machines.init : AT(ADDR(.mips.machines.init) - LOAD_OFFSET) {
+ 		__mips_machines_start = .;
+-		*(.mips.machines.init)
++		KEEP(*(.mips.machines.init))
+ 		__mips_machines_end = .;
+ 	}
+ 
diff --git a/target/linux/generic/hack-5.4/221-module_exports.patch b/target/linux/generic/hack-5.4/221-module_exports.patch
new file mode 100644
index 0000000000..cd5ae5830c
--- /dev/null
+++ b/target/linux/generic/hack-5.4/221-module_exports.patch
@@ -0,0 +1,101 @@
+From b14784e7883390c20ed3ff904892255404a5914b Mon Sep 17 00:00:00 2001
+From: Felix Fietkau <nbd@nbd.name>
+Date: Fri, 7 Jul 2017 17:05:53 +0200
+Subject: add an optional config option for stripping all unnecessary symbol exports from the kernel image
+
+lede-commit: bb5a40c64b7c4f4848509fa0a6625055fc9e66cc
+Signed-off-by: Felix Fietkau <nbd@nbd.name>
+---
+ include/asm-generic/vmlinux.lds.h | 18 +++++++++++++++---
+ include/linux/export.h            |  9 ++++++++-
+ scripts/Makefile.build            |  2 +-
+ 3 files changed, 24 insertions(+), 5 deletions(-)
+
+--- a/include/asm-generic/vmlinux.lds.h
++++ b/include/asm-generic/vmlinux.lds.h
+@@ -54,6 +54,16 @@
+ #define LOAD_OFFSET 0
+ #endif
+ 
++#ifndef SYMTAB_KEEP
++#define SYMTAB_KEEP KEEP(*(SORT(___ksymtab+*)))
++#define SYMTAB_KEEP_GPL KEEP(*(SORT(___ksymtab_gpl+*)))
++#endif
++
++#ifndef SYMTAB_DISCARD
++#define SYMTAB_DISCARD
++#define SYMTAB_DISCARD_GPL
++#endif
++
+ /* Align . to a 8 byte boundary equals to maximum function alignment. */
+ #define ALIGN_FUNCTION()  . = ALIGN(8)
+ 
+@@ -372,14 +382,14 @@
+ 	/* Kernel symbol table: Normal symbols */			\
+ 	__ksymtab         : AT(ADDR(__ksymtab) - LOAD_OFFSET) {		\
+ 		__start___ksymtab = .;					\
+-		KEEP(*(SORT(___ksymtab+*)))				\
++		SYMTAB_KEEP						\
+ 		__stop___ksymtab = .;					\
+ 	}								\
+ 									\
+ 	/* Kernel symbol table: GPL-only symbols */			\
+ 	__ksymtab_gpl     : AT(ADDR(__ksymtab_gpl) - LOAD_OFFSET) {	\
+ 		__start___ksymtab_gpl = .;				\
+-		KEEP(*(SORT(___ksymtab_gpl+*)))				\
++		SYMTAB_KEEP_GPL						\
+ 		__stop___ksymtab_gpl = .;				\
+ 	}								\
+ 									\
+@@ -441,7 +451,7 @@
+ 									\
+ 	/* Kernel symbol table: strings */				\
+         __ksymtab_strings : AT(ADDR(__ksymtab_strings) - LOAD_OFFSET) {	\
+-		*(__ksymtab_strings)					\
++		*(__ksymtab_strings+*)					\
+ 	}								\
+ 									\
+ 	/* __*init sections */						\
+@@ -841,6 +851,8 @@
+ 	EXIT_TEXT							\
+ 	EXIT_DATA							\
+ 	EXIT_CALL							\
++	SYMTAB_DISCARD							\
++	SYMTAB_DISCARD_GPL						\
+ 	*(.discard)							\
+ 	*(.discard.*)							\
+ 	}
+--- a/include/linux/export.h
++++ b/include/linux/export.h
+@@ -74,12 +74,19 @@ struct kernel_symbol {
+ };
+ #endif
+ 
++#ifdef MODULE
++#define __EXPORT_SUFFIX(sym)
++#else
++#define __EXPORT_SUFFIX(sym) "+" #sym
++#endif
++
+ /* For every exported symbol, place a struct in the __ksymtab section */
+ #define ___EXPORT_SYMBOL(sym, sec)					\
+ 	extern typeof(sym) sym;						\
+ 	__CRC_SYMBOL(sym, sec)						\
+ 	static const char __kstrtab_##sym[]				\
+-	__attribute__((section("__ksymtab_strings"), used, aligned(1)))	\
++	__attribute__((section("__ksymtab_strings"			\
++	  __EXPORT_SUFFIX(sym)), used, aligned(1)))			\
+ 	= #sym;								\
+ 	__KSYMTAB_ENTRY(sym, sec)
+ 
+--- a/scripts/Makefile.build
++++ b/scripts/Makefile.build
+@@ -408,7 +408,7 @@ targets += $(extra-y) $(MAKECMDGOALS) $(
+ # Linker scripts preprocessor (.lds.S -> .lds)
+ # ---------------------------------------------------------------------------
+ quiet_cmd_cpp_lds_S = LDS     $@
+-      cmd_cpp_lds_S = $(CPP) $(cpp_flags) -P -U$(ARCH) \
++      cmd_cpp_lds_S = $(CPP) $(EXTRA_LDSFLAGS) $(cpp_flags) -P -U$(ARCH) \
+ 	                     -D__ASSEMBLY__ -DLINKER_SCRIPT -o $@ $<
+ 
+ $(obj)/%.lds: $(src)/%.lds.S FORCE
diff --git a/target/linux/generic/hack-5.4/230-openwrt_lzma_options.patch b/target/linux/generic/hack-5.4/230-openwrt_lzma_options.patch
new file mode 100644
index 0000000000..1e945cd4c1
--- /dev/null
+++ b/target/linux/generic/hack-5.4/230-openwrt_lzma_options.patch
@@ -0,0 +1,71 @@
+From b3d00b452467f621317953d9e4c6f9ae8dcfd271 Mon Sep 17 00:00:00 2001
+From: Imre Kaloz <kaloz@openwrt.org>
+Date: Fri, 7 Jul 2017 17:06:55 +0200
+Subject: use the openwrt lzma options for now
+
+lede-commit: 548de949f392049420a6a1feeef118b30ab8ea8c
+Signed-off-by: Imre Kaloz <kaloz@openwrt.org>
+---
+ lib/decompress.c              |  1 +
+ scripts/Makefile.lib          |  2 +-
+ usr/gen_initramfs_list.sh | 10 +++++-----
+ 3 files changed, 7 insertions(+), 6 deletions(-)
+
+--- a/lib/decompress.c
++++ b/lib/decompress.c
+@@ -49,6 +49,7 @@ static const struct compress_format comp
+ 	{ {0x1f, 0x9e}, "gzip", gunzip },
+ 	{ {0x42, 0x5a}, "bzip2", bunzip2 },
+ 	{ {0x5d, 0x00}, "lzma", unlzma },
++	{ {0x6d, 0x00}, "lzma-openwrt", unlzma },
+ 	{ {0xfd, 0x37}, "xz", unxz },
+ 	{ {0x89, 0x4c}, "lzo", unlzo },
+ 	{ {0x02, 0x21}, "lz4", unlz4 },
+--- a/scripts/Makefile.lib
++++ b/scripts/Makefile.lib
+@@ -325,7 +325,7 @@ cmd_bzip2 = (cat $(filter-out FORCE,$^)
+ 
+ quiet_cmd_lzma = LZMA    $@
+ cmd_lzma = (cat $(filter-out FORCE,$^) | \
+-	lzma -9 && $(call size_append, $(filter-out FORCE,$^))) > $@ || \
++	lzma e -d20 -lc1 -lp2 -pb2 -eos -si -so && $(call size_append, $(filter-out FORCE,$^))) > $@ || \
+ 	(rm -f $@ ; false)
+ 
+ quiet_cmd_lzo = LZO     $@
+--- a/usr/gen_initramfs_list.sh
++++ b/usr/gen_initramfs_list.sh
+@@ -229,7 +229,7 @@ cpio_list=
+ output="/dev/stdout"
+ output_file=""
+ is_cpio_compressed=
+-compr="gzip -n -9 -f"
++compr="gzip -n -9 -f -"
+ 
+ arg="$1"
+ case "$arg" in
+@@ -245,13 +245,13 @@ case "$arg" in
+ 		output=${cpio_list}
+ 		echo "$output_file" | grep -q "\.gz$" \
+                 && [ -x "`which gzip 2> /dev/null`" ] \
+-                && compr="gzip -n -9 -f"
++                && compr="gzip -n -9 -f -"
+ 		echo "$output_file" | grep -q "\.bz2$" \
+                 && [ -x "`which bzip2 2> /dev/null`" ] \
+-                && compr="bzip2 -9 -f"
++                && compr="bzip2 -9 -f -"
+ 		echo "$output_file" | grep -q "\.lzma$" \
+                 && [ -x "`which lzma 2> /dev/null`" ] \
+-                && compr="lzma -9 -f"
++                && compr="lzma e -d20 -lc1 -lp2 -pb2 -eos -si -so"
+ 		echo "$output_file" | grep -q "\.xz$" \
+                 && [ -x "`which xz 2> /dev/null`" ] \
+                 && compr="xz --check=crc32 --lzma2=dict=1MiB"
+@@ -320,7 +320,7 @@ if [ ! -z ${output_file} ]; then
+ 	if [ "${is_cpio_compressed}" = "compressed" ]; then
+ 		cat ${cpio_tfile} > ${output_file}
+ 	else
+-		(cat ${cpio_tfile} | ${compr}  - > ${output_file}) \
++		(cat ${cpio_tfile} | ${compr} > ${output_file}) \
+ 		|| (rm -f ${output_file} ; false)
+ 	fi
+ 	[ -z ${cpio_file} ] && rm ${cpio_tfile}
diff --git a/target/linux/generic/hack-5.4/250-netfilter_depends.patch b/target/linux/generic/hack-5.4/250-netfilter_depends.patch
new file mode 100644
index 0000000000..cb744bd8ab
--- /dev/null
+++ b/target/linux/generic/hack-5.4/250-netfilter_depends.patch
@@ -0,0 +1,27 @@
+From: Felix Fietkau <nbd@nbd.name>
+Subject: hack: net: remove bogus netfilter dependencies
+
+lede-commit: 589d2a377dee27d206fc3725325309cf649e4df6
+Signed-off-by: Felix Fietkau <nbd@nbd.name>
+---
+ net/netfilter/Kconfig | 2 --
+ 1 file changed, 2 deletions(-)
+
+--- a/net/netfilter/Kconfig
++++ b/net/netfilter/Kconfig
+@@ -241,7 +241,6 @@ config NF_CONNTRACK_FTP
+ 
+ config NF_CONNTRACK_H323
+ 	tristate "H.323 protocol support"
+-	depends on IPV6 || IPV6=n
+ 	depends on NETFILTER_ADVANCED
+ 	help
+ 	  H.323 is a VoIP signalling protocol from ITU-T. As one of the most
+@@ -1077,7 +1076,6 @@ config NETFILTER_XT_TARGET_SECMARK
+ 
+ config NETFILTER_XT_TARGET_TCPMSS
+ 	tristate '"TCPMSS" target support'
+-	depends on IPV6 || IPV6=n
+ 	default m if NETFILTER_ADVANCED=n
+ 	---help---
+ 	  This option adds a `TCPMSS' target, which allows you to alter the
diff --git a/target/linux/generic/hack-5.4/251-sound_kconfig.patch b/target/linux/generic/hack-5.4/251-sound_kconfig.patch
new file mode 100644
index 0000000000..2cfc2fab3a
--- /dev/null
+++ b/target/linux/generic/hack-5.4/251-sound_kconfig.patch
@@ -0,0 +1,197 @@
+From da3c50704f14132f4adf80d48e9a4cd5d46e54c9 Mon Sep 17 00:00:00 2001
+From: John Crispin <john@phrozen.org>
+Date: Fri, 7 Jul 2017 17:09:21 +0200
+Subject: kconfig: owrt specifc dependencies
+
+Signed-off-by: John Crispin <john@phrozen.org>
+---
+ crypto/Kconfig        | 10 +++++-----
+ drivers/bcma/Kconfig  |  1 +
+ drivers/ssb/Kconfig   |  3 ++-
+ lib/Kconfig           |  8 ++++----
+ net/netfilter/Kconfig |  2 +-
+ net/wireless/Kconfig  | 17 ++++++++++-------
+ sound/core/Kconfig    |  4 ++--
+ 7 files changed, 25 insertions(+), 20 deletions(-)
+
+--- a/crypto/Kconfig
++++ b/crypto/Kconfig
+@@ -33,7 +33,7 @@ config CRYPTO_FIPS
+ 	  this is.
+ 
+ config CRYPTO_ALGAPI
+-	tristate
++	tristate "ALGAPI"
+ 	select CRYPTO_ALGAPI2
+ 	help
+ 	  This option provides the API for cryptographic algorithms.
+@@ -42,7 +42,7 @@ config CRYPTO_ALGAPI2
+ 	tristate
+ 
+ config CRYPTO_AEAD
+-	tristate
++	tristate "AEAD"
+ 	select CRYPTO_AEAD2
+ 	select CRYPTO_ALGAPI
+ 
+@@ -53,7 +53,7 @@ config CRYPTO_AEAD2
+ 	select CRYPTO_RNG2
+ 
+ config CRYPTO_BLKCIPHER
+-	tristate
++	tristate "BLKCIPHER"
+ 	select CRYPTO_BLKCIPHER2
+ 	select CRYPTO_ALGAPI
+ 
+@@ -64,7 +64,7 @@ config CRYPTO_BLKCIPHER2
+ 	select CRYPTO_WORKQUEUE
+ 
+ config CRYPTO_HASH
+-	tristate
++	tristate "HASH"
+ 	select CRYPTO_HASH2
+ 	select CRYPTO_ALGAPI
+ 
+@@ -73,7 +73,7 @@ config CRYPTO_HASH2
+ 	select CRYPTO_ALGAPI2
+ 
+ config CRYPTO_RNG
+-	tristate
++	tristate "RNG"
+ 	select CRYPTO_RNG2
+ 	select CRYPTO_ALGAPI
+ 
+--- a/drivers/bcma/Kconfig
++++ b/drivers/bcma/Kconfig
+@@ -16,6 +16,7 @@ if BCMA
+ # Support for Block-I/O. SELECT this from the driver that needs it.
+ config BCMA_BLOCKIO
+ 	bool
++	default y
+ 
+ config BCMA_HOST_PCI_POSSIBLE
+ 	bool
+--- a/drivers/ssb/Kconfig
++++ b/drivers/ssb/Kconfig
+@@ -28,6 +28,7 @@ config SSB_SPROM
+ config SSB_BLOCKIO
+ 	bool
+ 	depends on SSB
++	default y
+ 
+ config SSB_PCIHOST_POSSIBLE
+ 	bool
+@@ -48,7 +49,7 @@ config SSB_PCIHOST
+ config SSB_B43_PCI_BRIDGE
+ 	bool
+ 	depends on SSB_PCIHOST
+-	default n
++	default y
+ 
+ config SSB_PCMCIAHOST_POSSIBLE
+ 	bool
+--- a/lib/Kconfig
++++ b/lib/Kconfig
+@@ -377,16 +377,16 @@ config BCH_CONST_T
+ # Textsearch support is select'ed if needed
+ #
+ config TEXTSEARCH
+-	bool
++	bool "Textsearch support"
+ 
+ config TEXTSEARCH_KMP
+-	tristate
++	tristate "Textsearch KMP"
+ 
+ config TEXTSEARCH_BM
+-	tristate
++	tristate "Textsearch BM"
+ 
+ config TEXTSEARCH_FSM
+-	tristate
++	tristate "Textsearch FSM"
+ 
+ config BTREE
+ 	bool
+--- a/net/netfilter/Kconfig
++++ b/net/netfilter/Kconfig
+@@ -10,7 +10,7 @@ config NETFILTER_INGRESS
+ 	  infrastructure.
+ 
+ config NETFILTER_NETLINK
+-	tristate
++	tristate "Netfilter NFNETLINK interface"
+ 
+ config NETFILTER_FAMILY_BRIDGE
+ 	bool
+--- a/net/wireless/Kconfig
++++ b/net/wireless/Kconfig
+@@ -1,5 +1,5 @@
+ config WIRELESS_EXT
+-	bool
++	bool "Wireless extensions"
+ 
+ config WEXT_CORE
+ 	def_bool y
+@@ -11,10 +11,10 @@ config WEXT_PROC
+ 	depends on WEXT_CORE
+ 
+ config WEXT_SPY
+-	bool
++	bool "WEXT_SPY"
+ 
+ config WEXT_PRIV
+-	bool
++	bool "WEXT_PRIV"
+ 
+ config CFG80211
+ 	tristate "cfg80211 - wireless configuration API"
+@@ -202,7 +202,7 @@ config CFG80211_WEXT_EXPORT
+ endif # CFG80211
+ 
+ config LIB80211
+-	tristate
++	tristate "LIB80211"
+ 	default n
+ 	help
+ 	  This options enables a library of common routines used
+@@ -211,13 +211,16 @@ config LIB80211
+ 	  Drivers should select this themselves if needed.
+ 
+ config LIB80211_CRYPT_WEP
+-	tristate
++	tristate "LIB80211_CRYPT_WEP"
++	select LIB80211
+ 
+ config LIB80211_CRYPT_CCMP
+-	tristate
++	tristate "LIB80211_CRYPT_CCMP"
++	select LIB80211
+ 
+ config LIB80211_CRYPT_TKIP
+-	tristate
++	tristate "LIB80211_CRYPT_TKIP"
++	select LIB80211
+ 
+ config LIB80211_DEBUG
+ 	bool "lib80211 debugging messages"
+--- a/sound/core/Kconfig
++++ b/sound/core/Kconfig
+@@ -16,7 +16,7 @@ config SND_DMAENGINE_PCM
+ 	tristate
+ 
+ config SND_HWDEP
+-	tristate
++	tristate "Sound hardware support"
+ 
+ config SND_SEQ_DEVICE
+ 	tristate
+@@ -26,7 +26,7 @@ config SND_RAWMIDI
+ 	select SND_SEQ_DEVICE if SND_SEQUENCER != n
+ 
+ config SND_COMPRESS_OFFLOAD
+-	tristate
++	tristate "Compression offloading support"
+ 
+ config SND_JACK
+ 	bool
diff --git a/target/linux/generic/hack-5.4/259-regmap_dynamic.patch b/target/linux/generic/hack-5.4/259-regmap_dynamic.patch
new file mode 100644
index 0000000000..ec4636dbee
--- /dev/null
+++ b/target/linux/generic/hack-5.4/259-regmap_dynamic.patch
@@ -0,0 +1,110 @@
+From 811d9e2268a62b830cfe93cd8bc929afcb8b198b Mon Sep 17 00:00:00 2001
+From: Felix Fietkau <nbd@nbd.name>
+Date: Sat, 15 Jul 2017 21:12:38 +0200
+Subject: kernel: move regmap bloat out of the kernel image if it is only being used in modules
+
+lede-commit: 96f39119815028073583e4fca3a9c5fe9141e998
+Signed-off-by: Felix Fietkau <nbd@nbd.name>
+---
+ drivers/base/regmap/Kconfig  | 15 ++++++++++-----
+ drivers/base/regmap/Makefile | 12 ++++++++----
+ drivers/base/regmap/regmap.c |  3 +++
+ include/linux/regmap.h       |  2 +-
+ 4 files changed, 22 insertions(+), 10 deletions(-)
+
+--- a/drivers/base/regmap/Kconfig
++++ b/drivers/base/regmap/Kconfig
+@@ -4,9 +4,8 @@
+ # subsystems should select the appropriate symbols.
+ 
+ config REGMAP
+-	default y if (REGMAP_I2C || REGMAP_SPI || REGMAP_SPMI || REGMAP_W1 || REGMAP_AC97 || REGMAP_MMIO || REGMAP_IRQ)
+ 	select IRQ_DOMAIN if REGMAP_IRQ
+-	bool
++	tristate
+ 
+ config REGCACHE_COMPRESSED
+ 	select LZO_COMPRESS
+@@ -18,6 +17,7 @@ config REGMAP_AC97
+ 
+ config REGMAP_I2C
+ 	tristate
++	select REGMAP
+ 	depends on I2C
+ 
+ config REGMAP_SLIMBUS
+@@ -26,20 +26,26 @@ config REGMAP_SLIMBUS
+ 
+ config REGMAP_SPI
+ 	tristate
++	select REGMAP
++	depends on SPI_MASTER
+ 	depends on SPI
+ 
+ config REGMAP_SPMI
++	select REGMAP
+ 	tristate
+ 	depends on SPMI
+ 
+ config REGMAP_W1
++	select REGMAP
+ 	tristate
+ 	depends on W1
+ 
+ config REGMAP_MMIO
+ 	tristate
++	select REGMAP
+ 
+ config REGMAP_IRQ
++	select REGMAP
+ 	bool
+ 
+ config REGMAP_SOUNDWIRE
+--- a/drivers/base/regmap/Makefile
++++ b/drivers/base/regmap/Makefile
+@@ -2,10 +2,14 @@
+ # For include/trace/define_trace.h to include trace.h
+ CFLAGS_regmap.o := -I$(src)
+ 
+-obj-$(CONFIG_REGMAP) += regmap.o regcache.o
+-obj-$(CONFIG_REGMAP) += regcache-rbtree.o regcache-flat.o
+-obj-$(CONFIG_REGCACHE_COMPRESSED) += regcache-lzo.o
+-obj-$(CONFIG_DEBUG_FS) += regmap-debugfs.o
++regmap-core-objs = regmap.o regcache.o regcache-rbtree.o regcache-flat.o
++ifdef CONFIG_DEBUG_FS
++regmap-core-objs += regmap-debugfs.o
++endif
++ifdef CONFIG_REGCACHE_COMPRESSED
++regmap-core-objs += regcache-lzo.o
++endif
++obj-$(CONFIG_REGMAP) += regmap-core.o
+ obj-$(CONFIG_REGMAP_AC97) += regmap-ac97.o
+ obj-$(CONFIG_REGMAP_I2C) += regmap-i2c.o
+ obj-$(CONFIG_REGMAP_SLIMBUS) += regmap-slimbus.o
+--- a/drivers/base/regmap/regmap.c
++++ b/drivers/base/regmap/regmap.c
+@@ -13,6 +13,7 @@
+ #include <linux/device.h>
+ #include <linux/slab.h>
+ #include <linux/export.h>
++#include <linux/module.h>
+ #include <linux/mutex.h>
+ #include <linux/err.h>
+ #include <linux/of.h>
+@@ -3039,3 +3040,5 @@ static int __init regmap_initcall(void)
+ 	return 0;
+ }
+ postcore_initcall(regmap_initcall);
++
++MODULE_LICENSE("GPL");
+--- a/include/linux/regmap.h
++++ b/include/linux/regmap.h
+@@ -187,7 +187,7 @@ struct reg_sequence {
+ 	pollret ?: ((cond) ? 0 : -ETIMEDOUT); \
+ })
+ 
+-#ifdef CONFIG_REGMAP
++#if IS_REACHABLE(CONFIG_REGMAP)
+ 
+ enum regmap_endian {
+ 	/* Unspecified -> 0 -> Backwards compatible default */
diff --git a/target/linux/generic/hack-5.4/260-crypto_test_dependencies.patch b/target/linux/generic/hack-5.4/260-crypto_test_dependencies.patch
new file mode 100644
index 0000000000..f11f45437f
--- /dev/null
+++ b/target/linux/generic/hack-5.4/260-crypto_test_dependencies.patch
@@ -0,0 +1,60 @@
+From fd1799b0bf5efa46dd3e6dfbbf3955564807e508 Mon Sep 17 00:00:00 2001
+From: Felix Fietkau <nbd@nbd.name>
+Date: Fri, 7 Jul 2017 17:12:51 +0200
+Subject: kernel: prevent cryptomgr from pulling in useless extra dependencies for tests that are not run
+
+Reduces kernel size after LZMA by about 5k on MIPS
+
+lede-commit: 044c316167e076479a344c59905e5b435b84a77f
+Signed-off-by: Felix Fietkau <nbd@nbd.name>
+---
+ crypto/Kconfig   | 13 ++++++-------
+ crypto/algboss.c |  4 ++++
+ 2 files changed, 10 insertions(+), 7 deletions(-)
+
+--- a/crypto/Kconfig
++++ b/crypto/Kconfig
+@@ -144,13 +144,13 @@ config CRYPTO_MANAGER
+ 	  cbc(aes).
+ 
+ config CRYPTO_MANAGER2
+-	def_tristate CRYPTO_MANAGER || (CRYPTO_MANAGER!=n && CRYPTO_ALGAPI=y)
+-	select CRYPTO_AEAD2
+-	select CRYPTO_HASH2
+-	select CRYPTO_BLKCIPHER2
+-	select CRYPTO_AKCIPHER2
+-	select CRYPTO_KPP2
+-	select CRYPTO_ACOMP2
++	def_tristate CRYPTO_MANAGER || (CRYPTO_MANAGER!=n && CRYPTO_ALGAPI=y && !CRYPTO_MANAGER_DISABLE_TESTS)
++	select CRYPTO_AEAD2 if !CRYPTO_MANAGER_DISABLE_TESTS
++	select CRYPTO_HASH2 if !CRYPTO_MANAGER_DISABLE_TESTS
++	select CRYPTO_BLKCIPHER2 if !CRYPTO_MANAGER_DISABLE_TESTS
++	select CRYPTO_AKCIPHER2 if !CRYPTO_MANAGER_DISABLE_TESTS
++	select CRYPTO_KPP2 if !CRYPTO_MANAGER_DISABLE_TESTS
++	select CRYPTO_ACOMP2 if !CRYPTO_MANAGER_DISABLE_TESTS
+ 
+ config CRYPTO_USER
+ 	tristate "Userspace cryptographic algorithm configuration"
+@@ -163,7 +163,6 @@ config CRYPTO_USER
+ config CRYPTO_MANAGER_DISABLE_TESTS
+ 	bool "Disable run-time self tests"
+ 	default y
+-	depends on CRYPTO_MANAGER2
+ 	help
+ 	  Disable run-time self tests that normally take place at
+ 	  algorithm registration.
+--- a/crypto/algboss.c
++++ b/crypto/algboss.c
+@@ -247,8 +247,12 @@ static int cryptomgr_schedule_test(struc
+ 	type = alg->cra_flags;
+ 
+ 	/* Do not test internal algorithms. */
++#ifdef CONFIG_CRYPTO_MANAGER_DISABLE_TESTS
++	type |= CRYPTO_ALG_TESTED;
++#else
+ 	if (type & CRYPTO_ALG_INTERNAL)
+ 		type |= CRYPTO_ALG_TESTED;
++#endif
+ 
+ 	param->type = type;
+ 
diff --git a/target/linux/generic/hack-5.4/280-rfkill-stubs.patch b/target/linux/generic/hack-5.4/280-rfkill-stubs.patch
new file mode 100644
index 0000000000..7bb7d26b90
--- /dev/null
+++ b/target/linux/generic/hack-5.4/280-rfkill-stubs.patch
@@ -0,0 +1,84 @@
+From 236c1acdfef5958010ac9814a9872e0a46fd78ee Mon Sep 17 00:00:00 2001
+From: John Crispin <john@phrozen.org>
+Date: Fri, 7 Jul 2017 17:13:44 +0200
+Subject: rfkill: add fake rfkill support
+
+allow building of modules depending on RFKILL even if RFKILL is not enabled.
+
+Signed-off-by: John Crispin <john@phrozen.org>
+---
+ include/linux/rfkill.h |  2 +-
+ net/Makefile           |  2 +-
+ net/rfkill/Kconfig     | 14 +++++++++-----
+ net/rfkill/Makefile    |  2 +-
+ 4 files changed, 12 insertions(+), 8 deletions(-)
+
+--- a/include/linux/rfkill.h
++++ b/include/linux/rfkill.h
+@@ -64,7 +64,7 @@ struct rfkill_ops {
+ 	int	(*set_block)(void *data, bool blocked);
+ };
+ 
+-#if defined(CONFIG_RFKILL) || defined(CONFIG_RFKILL_MODULE)
++#if defined(CONFIG_RFKILL_FULL) || defined(CONFIG_RFKILL_FULL_MODULE)
+ /**
+  * rfkill_alloc - Allocate rfkill structure
+  * @name: name of the struct -- the string is not copied internally
+--- a/net/Makefile
++++ b/net/Makefile
+@@ -53,7 +53,7 @@ obj-$(CONFIG_TIPC)		+= tipc/
+ obj-$(CONFIG_NETLABEL)		+= netlabel/
+ obj-$(CONFIG_IUCV)		+= iucv/
+ obj-$(CONFIG_SMC)		+= smc/
+-obj-$(CONFIG_RFKILL)		+= rfkill/
++obj-$(CONFIG_RFKILL_FULL)	+= rfkill/
+ obj-$(CONFIG_NET_9P)		+= 9p/
+ obj-$(CONFIG_CAIF)		+= caif/
+ ifneq ($(CONFIG_DCB),)
+--- a/net/rfkill/Kconfig
++++ b/net/rfkill/Kconfig
+@@ -1,7 +1,11 @@
+ #
+ # RF switch subsystem configuration
+ #
+-menuconfig RFKILL
++config RFKILL
++	bool
++	default y
++
++menuconfig RFKILL_FULL
+ 	tristate "RF switch subsystem support"
+ 	help
+ 	  Say Y here if you want to have control over RF switches
+@@ -13,19 +17,19 @@ menuconfig RFKILL
+ # LED trigger support
+ config RFKILL_LEDS
+ 	bool
+-	depends on RFKILL
++	depends on RFKILL_FULL
+ 	depends on LEDS_TRIGGERS = y || RFKILL = LEDS_TRIGGERS
+ 	default y
+ 
+ config RFKILL_INPUT
+ 	bool "RF switch input support" if EXPERT
+-	depends on RFKILL
++	depends on RFKILL_FULL
+ 	depends on INPUT = y || RFKILL = INPUT
+ 	default y if !EXPERT
+ 
+ config RFKILL_GPIO
+ 	tristate "GPIO RFKILL driver"
+-	depends on RFKILL
++	depends on RFKILL_FULL
+ 	depends on GPIOLIB || COMPILE_TEST
+ 	default n
+ 	help
+--- a/net/rfkill/Makefile
++++ b/net/rfkill/Makefile
+@@ -4,5 +4,5 @@
+ 
+ rfkill-y			+= core.o
+ rfkill-$(CONFIG_RFKILL_INPUT)	+= input.o
+-obj-$(CONFIG_RFKILL)		+= rfkill.o
++obj-$(CONFIG_RFKILL_FULL)	+= rfkill.o
+ obj-$(CONFIG_RFKILL_GPIO)	+= rfkill-gpio.o
diff --git a/target/linux/generic/hack-5.4/290-nvmem-make-CONFIG_NVMEM-tristate-again.patch b/target/linux/generic/hack-5.4/290-nvmem-make-CONFIG_NVMEM-tristate-again.patch
new file mode 100644
index 0000000000..ad45dc9168
--- /dev/null
+++ b/target/linux/generic/hack-5.4/290-nvmem-make-CONFIG_NVMEM-tristate-again.patch
@@ -0,0 +1,33 @@
+From 2579d9b982c7232f9354bcca5262e26a84c38799 Mon Sep 17 00:00:00 2001
+From: Hauke Mehrtens <hauke@hauke-m.de>
+Date: Fri, 2 Nov 2018 17:40:32 +0100
+Subject: [PATCH] nvmem: make CONFIG_NVMEM tristate again
+
+Only build it in when OF_NET is selected and make it possible to build
+it as module otherwise.
+
+Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
+---
+ drivers/nvmem/Kconfig | 2 +-
+ drivers/of/Kconfig    | 1 +
+ 2 files changed, 2 insertions(+), 1 deletion(-)
+
+--- a/drivers/nvmem/Kconfig
++++ b/drivers/nvmem/Kconfig
+@@ -1,5 +1,5 @@
+ menuconfig NVMEM
+-	bool "NVMEM Support"
++	tristate "NVMEM Support"
+ 	help
+ 	  Support for NVMEM(Non Volatile Memory) devices like EEPROM, EFUSES...
+ 
+--- a/drivers/of/Kconfig
++++ b/drivers/of/Kconfig
+@@ -71,6 +71,7 @@ config OF_IRQ
+ 
+ config OF_NET
+ 	depends on NETDEVICES
++	select NVMEM
+ 	def_bool y
+ 
+ config OF_MDIO
diff --git a/target/linux/generic/hack-5.4/300-MIPS-r4k_cache-use-more-efficient-cache-blast.patch b/target/linux/generic/hack-5.4/300-MIPS-r4k_cache-use-more-efficient-cache-blast.patch
new file mode 100644
index 0000000000..c07ccf9474
--- /dev/null
+++ b/target/linux/generic/hack-5.4/300-MIPS-r4k_cache-use-more-efficient-cache-blast.patch
@@ -0,0 +1,66 @@
+From: Ben Menchaca <ben.menchaca@qca.qualcomm.com>
+Date: Fri, 7 Jun 2013 18:35:22 -0500
+Subject: MIPS: r4k_cache: use more efficient cache blast
+
+Optimize the compiler output for larger cache blast cases that are
+common for DMA-based networking.
+
+Signed-off-by: Ben Menchaca <ben.menchaca@qca.qualcomm.com>
+Signed-off-by: Felix Fietkau <nbd@nbd.name>
+---
+--- a/arch/mips/include/asm/r4kcache.h
++++ b/arch/mips/include/asm/r4kcache.h
+@@ -683,16 +683,48 @@ static inline void prot##extra##blast_##
+ 						    unsigned long end)	\
+ {									\
+ 	unsigned long lsize = cpu_##desc##_line_size();			\
++	unsigned long lsize_2 = lsize * 2;				\
++	unsigned long lsize_3 = lsize * 3;				\
++	unsigned long lsize_4 = lsize * 4;				\
++	unsigned long lsize_5 = lsize * 5;				\
++	unsigned long lsize_6 = lsize * 6;				\
++	unsigned long lsize_7 = lsize * 7;				\
++	unsigned long lsize_8 = lsize * 8;				\
+ 	unsigned long addr = start & ~(lsize - 1);			\
+-	unsigned long aend = (end - 1) & ~(lsize - 1);			\
++	unsigned long aend = (end + lsize - 1) & ~(lsize - 1);		\
++	int lines = (aend - addr) / lsize;				\
+ 									\
+ 	__##pfx##flush_prologue						\
+ 									\
+-	while (1) {							\
++	while (lines >= 8) {						\
++		prot##cache_op(hitop, addr);				\
++		prot##cache_op(hitop, addr + lsize);			\
++		prot##cache_op(hitop, addr + lsize_2);			\
++		prot##cache_op(hitop, addr + lsize_3);			\
++		prot##cache_op(hitop, addr + lsize_4);			\
++		prot##cache_op(hitop, addr + lsize_5);			\
++		prot##cache_op(hitop, addr + lsize_6);			\
++		prot##cache_op(hitop, addr + lsize_7);			\
++		addr += lsize_8;					\
++		lines -= 8;						\
++	}								\
++									\
++	if (lines & 0x4) {						\
++		prot##cache_op(hitop, addr);				\
++		prot##cache_op(hitop, addr + lsize);			\
++		prot##cache_op(hitop, addr + lsize_2);			\
++		prot##cache_op(hitop, addr + lsize_3);			\
++		addr += lsize_4;					\
++	}								\
++									\
++	if (lines & 0x2) {						\
++		prot##cache_op(hitop, addr);				\
++		prot##cache_op(hitop, addr + lsize);			\
++		addr += lsize_2;					\
++	}								\
++									\
++	if (lines & 0x1) {						\
+ 		prot##cache_op(hitop, addr);				\
+-		if (addr == aend)					\
+-			break;						\
+-		addr += lsize;						\
+ 	}								\
+ 									\
+ 	__##pfx##flush_epilogue						\
diff --git a/target/linux/generic/hack-5.4/301-mips_image_cmdline_hack.patch b/target/linux/generic/hack-5.4/301-mips_image_cmdline_hack.patch
new file mode 100644
index 0000000000..da7d1fdbe0
--- /dev/null
+++ b/target/linux/generic/hack-5.4/301-mips_image_cmdline_hack.patch
@@ -0,0 +1,38 @@
+From: John Crispin <john@phrozen.org>
+Subject: hack: kernel: add generic image_cmdline hack to MIPS targets
+
+lede-commit: d59f5b3a987a48508257a0ddbaeadc7909f9f976
+Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
+---
+ arch/mips/Kconfig       | 4 ++++
+ arch/mips/kernel/head.S | 6 ++++++
+ 2 files changed, 10 insertions(+)
+
+--- a/arch/mips/Kconfig
++++ b/arch/mips/Kconfig
+@@ -1144,6 +1144,10 @@ config SYNC_R4K
+ config MIPS_MACHINE
+ 	def_bool n
+ 
++config IMAGE_CMDLINE_HACK
++	bool "OpenWrt specific image command line hack"
++	default n
++
+ config NO_IOPORT_MAP
+ 	def_bool n
+ 
+--- a/arch/mips/kernel/head.S
++++ b/arch/mips/kernel/head.S
+@@ -79,6 +79,12 @@ FEXPORT(__kernel_entry)
+ 	j	kernel_entry
+ #endif
+ 
++#ifdef CONFIG_IMAGE_CMDLINE_HACK
++	.ascii	"CMDLINE:"
++EXPORT(__image_cmdline)
++	.fill	0x400
++#endif /* CONFIG_IMAGE_CMDLINE_HACK */
++
+ 	__REF
+ 
+ NESTED(kernel_entry, 16, sp)			# kernel entry point
diff --git a/target/linux/generic/hack-5.4/321-powerpc_crtsavres_prereq.patch b/target/linux/generic/hack-5.4/321-powerpc_crtsavres_prereq.patch
new file mode 100644
index 0000000000..26c385f011
--- /dev/null
+++ b/target/linux/generic/hack-5.4/321-powerpc_crtsavres_prereq.patch
@@ -0,0 +1,39 @@
+From 107c0964cb8db7ca28ac5199426414fdab3c274d Mon Sep 17 00:00:00 2001
+From: "Alexandros C. Couloumbis" <alex@ozo.com>
+Date: Fri, 7 Jul 2017 17:14:51 +0200
+Subject: hack: arch: powerpc: drop register save/restore library from modules
+
+Upstream GCC uses a libgcc function for saving/restoring registers. This
+makes the code bigger, and upstream kernels need to carry that function
+for every single kernel module. Our GCC is patched to avoid those
+references, so we can drop the extra bloat for modules.
+
+lede-commit: e8e1084654f50904e6bf77b70b2de3f137d7b3ec
+Signed-off-by: Alexandros C. Couloumbis <alex@ozo.com>
+---
+ arch/powerpc/Makefile | 1 -
+ 1 file changed, 1 deletion(-)
+
+--- a/arch/powerpc/Makefile
++++ b/arch/powerpc/Makefile
+@@ -60,20 +60,6 @@ machine-$(CONFIG_PPC64) += 64
+ machine-$(CONFIG_CPU_LITTLE_ENDIAN) += le
+ UTS_MACHINE := $(subst $(space),,$(machine-y))
+ 
+-# XXX This needs to be before we override LD below
+-ifdef CONFIG_PPC32
+-KBUILD_LDFLAGS_MODULE += arch/powerpc/lib/crtsavres.o
+-else
+-KBUILD_LDFLAGS_MODULE += -T $(srctree)/arch/powerpc/kernel/module.lds
+-ifeq ($(call ld-ifversion, -ge, 225000000, y),y)
+-# Have the linker provide sfpr if possible.
+-# There is a corresponding test in arch/powerpc/lib/Makefile
+-KBUILD_LDFLAGS_MODULE += --save-restore-funcs
+-else
+-KBUILD_LDFLAGS_MODULE += arch/powerpc/lib/crtsavres.o
+-endif
+-endif
+-
+ ifdef CONFIG_CPU_LITTLE_ENDIAN
+ KBUILD_CFLAGS	+= -mlittle-endian
+ KBUILD_LDFLAGS	+= -EL
diff --git a/target/linux/generic/hack-5.4/531-debloat_lzma.patch b/target/linux/generic/hack-5.4/531-debloat_lzma.patch
new file mode 100644
index 0000000000..2e453cc2f2
--- /dev/null
+++ b/target/linux/generic/hack-5.4/531-debloat_lzma.patch
@@ -0,0 +1,1040 @@
+From 3fd297761ac246c54d7723c57fca95c112b99465 Mon Sep 17 00:00:00 2001
+From: Felix Fietkau <nbd@nbd.name>
+Date: Sat, 15 Jul 2017 21:15:44 +0200
+Subject: lzma: de-bloat the lzma library used by jffs2
+
+lede-commit: 3fd1dd08fbcbb78b34efefd32c3032e5c99108d6
+Signed-off-by: Felix Fietkau <nbd@nbd.name>
+---
+ include/linux/lzma/LzFind.h  |  17 ---
+ include/linux/lzma/LzmaDec.h | 101 ---------------
+ include/linux/lzma/LzmaEnc.h |  20 ---
+ lib/lzma/LzFind.c            | 287 ++++---------------------------------------
+ lib/lzma/LzmaDec.c           |  86 +------------
+ lib/lzma/LzmaEnc.c           | 172 ++------------------------
+ 6 files changed, 42 insertions(+), 641 deletions(-)
+
+--- a/include/linux/lzma/LzFind.h
++++ b/include/linux/lzma/LzFind.h
+@@ -55,11 +55,6 @@ typedef struct _CMatchFinder
+ 
+ #define Inline_MatchFinder_GetNumAvailableBytes(p) ((p)->streamPos - (p)->pos)
+ 
+-int MatchFinder_NeedMove(CMatchFinder *p);
+-Byte *MatchFinder_GetPointerToCurrentPos(CMatchFinder *p);
+-void MatchFinder_MoveBlock(CMatchFinder *p);
+-void MatchFinder_ReadIfRequired(CMatchFinder *p);
+-
+ void MatchFinder_Construct(CMatchFinder *p);
+ 
+ /* Conditions:
+@@ -70,12 +65,6 @@ int MatchFinder_Create(CMatchFinder *p,
+     UInt32 keepAddBufferBefore, UInt32 matchMaxLen, UInt32 keepAddBufferAfter,
+     ISzAlloc *alloc);
+ void MatchFinder_Free(CMatchFinder *p, ISzAlloc *alloc);
+-void MatchFinder_Normalize3(UInt32 subValue, CLzRef *items, UInt32 numItems);
+-void MatchFinder_ReduceOffsets(CMatchFinder *p, UInt32 subValue);
+-
+-UInt32 * GetMatchesSpec1(UInt32 lenLimit, UInt32 curMatch, UInt32 pos, const Byte *buffer, CLzRef *son,
+-    UInt32 _cyclicBufferPos, UInt32 _cyclicBufferSize, UInt32 _cutValue,
+-    UInt32 *distances, UInt32 maxLen);
+ 
+ /*
+ Conditions:
+@@ -102,12 +91,6 @@ typedef struct _IMatchFinder
+ 
+ void MatchFinder_CreateVTable(CMatchFinder *p, IMatchFinder *vTable);
+ 
+-void MatchFinder_Init(CMatchFinder *p);
+-UInt32 Bt3Zip_MatchFinder_GetMatches(CMatchFinder *p, UInt32 *distances);
+-UInt32 Hc3Zip_MatchFinder_GetMatches(CMatchFinder *p, UInt32 *distances);
+-void Bt3Zip_MatchFinder_Skip(CMatchFinder *p, UInt32 num);
+-void Hc3Zip_MatchFinder_Skip(CMatchFinder *p, UInt32 num);
+-
+ #ifdef __cplusplus
+ }
+ #endif
+--- a/include/linux/lzma/LzmaDec.h
++++ b/include/linux/lzma/LzmaDec.h
+@@ -31,14 +31,6 @@ typedef struct _CLzmaProps
+   UInt32 dicSize;
+ } CLzmaProps;
+ 
+-/* LzmaProps_Decode - decodes properties
+-Returns:
+-  SZ_OK
+-  SZ_ERROR_UNSUPPORTED - Unsupported properties
+-*/
+-
+-SRes LzmaProps_Decode(CLzmaProps *p, const Byte *data, unsigned size);
+-
+ 
+ /* ---------- LZMA Decoder state ---------- */
+ 
+@@ -70,8 +62,6 @@ typedef struct
+ 
+ #define LzmaDec_Construct(p) { (p)->dic = 0; (p)->probs = 0; }
+ 
+-void LzmaDec_Init(CLzmaDec *p);
+-
+ /* There are two types of LZMA streams:
+      0) Stream with end mark. That end mark adds about 6 bytes to compressed size.
+      1) Stream without end mark. You must know exact uncompressed size to decompress such stream. */
+@@ -108,97 +98,6 @@ typedef enum
+ 
+ /* ELzmaStatus is used only as output value for function call */
+ 
+-
+-/* ---------- Interfaces ---------- */
+-
+-/* There are 3 levels of interfaces:
+-     1) Dictionary Interface
+-     2) Buffer Interface
+-     3) One Call Interface
+-   You can select any of these interfaces, but don't mix functions from different
+-   groups for same object. */
+-
+-
+-/* There are two variants to allocate state for Dictionary Interface:
+-     1) LzmaDec_Allocate / LzmaDec_Free
+-     2) LzmaDec_AllocateProbs / LzmaDec_FreeProbs
+-   You can use variant 2, if you set dictionary buffer manually.
+-   For Buffer Interface you must always use variant 1.
+-
+-LzmaDec_Allocate* can return:
+-  SZ_OK
+-  SZ_ERROR_MEM         - Memory allocation error
+-  SZ_ERROR_UNSUPPORTED - Unsupported properties
+-*/
+-   
+-SRes LzmaDec_AllocateProbs(CLzmaDec *p, const Byte *props, unsigned propsSize, ISzAlloc *alloc);
+-void LzmaDec_FreeProbs(CLzmaDec *p, ISzAlloc *alloc);
+-
+-SRes LzmaDec_Allocate(CLzmaDec *state, const Byte *prop, unsigned propsSize, ISzAlloc *alloc);
+-void LzmaDec_Free(CLzmaDec *state, ISzAlloc *alloc);
+-
+-/* ---------- Dictionary Interface ---------- */
+-
+-/* You can use it, if you want to eliminate the overhead for data copying from
+-   dictionary to some other external buffer.
+-   You must work with CLzmaDec variables directly in this interface.
+-
+-   STEPS:
+-     LzmaDec_Constr()
+-     LzmaDec_Allocate()
+-     for (each new stream)
+-     {
+-       LzmaDec_Init()
+-       while (it needs more decompression)
+-       {
+-         LzmaDec_DecodeToDic()
+-         use data from CLzmaDec::dic and update CLzmaDec::dicPos
+-       }
+-     }
+-     LzmaDec_Free()
+-*/
+-
+-/* LzmaDec_DecodeToDic
+-   
+-   The decoding to internal dictionary buffer (CLzmaDec::dic).
+-   You must manually update CLzmaDec::dicPos, if it reaches CLzmaDec::dicBufSize !!!
+-
+-finishMode:
+-  It has meaning only if the decoding reaches output limit (dicLimit).
+-  LZMA_FINISH_ANY - Decode just dicLimit bytes.
+-  LZMA_FINISH_END - Stream must be finished after dicLimit.
+-
+-Returns:
+-  SZ_OK
+-    status:
+-      LZMA_STATUS_FINISHED_WITH_MARK
+-      LZMA_STATUS_NOT_FINISHED
+-      LZMA_STATUS_NEEDS_MORE_INPUT
+-      LZMA_STATUS_MAYBE_FINISHED_WITHOUT_MARK
+-  SZ_ERROR_DATA - Data error
+-*/
+-
+-SRes LzmaDec_DecodeToDic(CLzmaDec *p, SizeT dicLimit,
+-    const Byte *src, SizeT *srcLen, ELzmaFinishMode finishMode, ELzmaStatus *status);
+-
+-
+-/* ---------- Buffer Interface ---------- */
+-
+-/* It's zlib-like interface.
+-   See LzmaDec_DecodeToDic description for information about STEPS and return results,
+-   but you must use LzmaDec_DecodeToBuf instead of LzmaDec_DecodeToDic and you don't need
+-   to work with CLzmaDec variables manually.
+-
+-finishMode:
+-  It has meaning only if the decoding reaches output limit (*destLen).
+-  LZMA_FINISH_ANY - Decode just destLen bytes.
+-  LZMA_FINISH_END - Stream must be finished after (*destLen).
+-*/
+-
+-SRes LzmaDec_DecodeToBuf(CLzmaDec *p, Byte *dest, SizeT *destLen,
+-    const Byte *src, SizeT *srcLen, ELzmaFinishMode finishMode, ELzmaStatus *status);
+-
+-
+ /* ---------- One Call Interface ---------- */
+ 
+ /* LzmaDecode
+--- a/include/linux/lzma/LzmaEnc.h
++++ b/include/linux/lzma/LzmaEnc.h
+@@ -31,9 +31,6 @@ typedef struct _CLzmaEncProps
+ } CLzmaEncProps;
+ 
+ void LzmaEncProps_Init(CLzmaEncProps *p);
+-void LzmaEncProps_Normalize(CLzmaEncProps *p);
+-UInt32 LzmaEncProps_GetDictSize(const CLzmaEncProps *props2);
+-
+ 
+ /* ---------- CLzmaEncHandle Interface ---------- */
+ 
+@@ -53,26 +50,9 @@ CLzmaEncHandle LzmaEnc_Create(ISzAlloc *
+ void LzmaEnc_Destroy(CLzmaEncHandle p, ISzAlloc *alloc, ISzAlloc *allocBig);
+ SRes LzmaEnc_SetProps(CLzmaEncHandle p, const CLzmaEncProps *props);
+ SRes LzmaEnc_WriteProperties(CLzmaEncHandle p, Byte *properties, SizeT *size);
+-SRes LzmaEnc_Encode(CLzmaEncHandle p, ISeqOutStream *outStream, ISeqInStream *inStream,
+-    ICompressProgress *progress, ISzAlloc *alloc, ISzAlloc *allocBig);
+ SRes LzmaEnc_MemEncode(CLzmaEncHandle p, Byte *dest, SizeT *destLen, const Byte *src, SizeT srcLen,
+     int writeEndMark, ICompressProgress *progress, ISzAlloc *alloc, ISzAlloc *allocBig);
+ 
+-/* ---------- One Call Interface ---------- */
+-
+-/* LzmaEncode
+-Return code:
+-  SZ_OK               - OK
+-  SZ_ERROR_MEM        - Memory allocation error
+-  SZ_ERROR_PARAM      - Incorrect paramater
+-  SZ_ERROR_OUTPUT_EOF - output buffer overflow
+-  SZ_ERROR_THREAD     - errors in multithreading functions (only for Mt version)
+-*/
+-
+-SRes LzmaEncode(Byte *dest, SizeT *destLen, const Byte *src, SizeT srcLen,
+-    const CLzmaEncProps *props, Byte *propsEncoded, SizeT *propsSize, int writeEndMark,
+-    ICompressProgress *progress, ISzAlloc *alloc, ISzAlloc *allocBig);
+-
+ #ifdef __cplusplus
+ }
+ #endif
+--- a/lib/lzma/LzFind.c
++++ b/lib/lzma/LzFind.c
+@@ -14,9 +14,15 @@
+ 
+ #define kStartMaxLen 3
+ 
++#if 0
++#define DIRECT_INPUT	p->directInput
++#else
++#define DIRECT_INPUT	1
++#endif
++
+ static void LzInWindow_Free(CMatchFinder *p, ISzAlloc *alloc)
+ {
+-  if (!p->directInput)
++  if (!DIRECT_INPUT)
+   {
+     alloc->Free(alloc, p->bufferBase);
+     p->bufferBase = 0;
+@@ -28,7 +34,7 @@ static void LzInWindow_Free(CMatchFinder
+ static int LzInWindow_Create(CMatchFinder *p, UInt32 keepSizeReserv, ISzAlloc *alloc)
+ {
+   UInt32 blockSize = p->keepSizeBefore + p->keepSizeAfter + keepSizeReserv;
+-  if (p->directInput)
++  if (DIRECT_INPUT)
+   {
+     p->blockSize = blockSize;
+     return 1;
+@@ -42,12 +48,12 @@ static int LzInWindow_Create(CMatchFinde
+   return (p->bufferBase != 0);
+ }
+ 
+-Byte *MatchFinder_GetPointerToCurrentPos(CMatchFinder *p) { return p->buffer; }
+-Byte MatchFinder_GetIndexByte(CMatchFinder *p, Int32 index) { return p->buffer[index]; }
++static Byte *MatchFinder_GetPointerToCurrentPos(CMatchFinder *p) { return p->buffer; }
++static Byte MatchFinder_GetIndexByte(CMatchFinder *p, Int32 index) { return p->buffer[index]; }
+ 
+-UInt32 MatchFinder_GetNumAvailableBytes(CMatchFinder *p) { return p->streamPos - p->pos; }
++static UInt32 MatchFinder_GetNumAvailableBytes(CMatchFinder *p) { return p->streamPos - p->pos; }
+ 
+-void MatchFinder_ReduceOffsets(CMatchFinder *p, UInt32 subValue)
++static void MatchFinder_ReduceOffsets(CMatchFinder *p, UInt32 subValue)
+ {
+   p->posLimit -= subValue;
+   p->pos -= subValue;
+@@ -58,7 +64,7 @@ static void MatchFinder_ReadBlock(CMatch
+ {
+   if (p->streamEndWasReached || p->result != SZ_OK)
+     return;
+-  if (p->directInput)
++  if (DIRECT_INPUT)
+   {
+     UInt32 curSize = 0xFFFFFFFF - p->streamPos;
+     if (curSize > p->directInputRem)
+@@ -89,7 +95,7 @@ static void MatchFinder_ReadBlock(CMatch
+   }
+ }
+ 
+-void MatchFinder_MoveBlock(CMatchFinder *p)
++static void MatchFinder_MoveBlock(CMatchFinder *p)
+ {
+   memmove(p->bufferBase,
+     p->buffer - p->keepSizeBefore,
+@@ -97,22 +103,14 @@ void MatchFinder_MoveBlock(CMatchFinder
+   p->buffer = p->bufferBase + p->keepSizeBefore;
+ }
+ 
+-int MatchFinder_NeedMove(CMatchFinder *p)
++static int MatchFinder_NeedMove(CMatchFinder *p)
+ {
+-  if (p->directInput)
++  if (DIRECT_INPUT)
+     return 0;
+   /* if (p->streamEndWasReached) return 0; */
+   return ((size_t)(p->bufferBase + p->blockSize - p->buffer) <= p->keepSizeAfter);
+ }
+ 
+-void MatchFinder_ReadIfRequired(CMatchFinder *p)
+-{
+-  if (p->streamEndWasReached)
+-    return;
+-  if (p->keepSizeAfter >= p->streamPos - p->pos)
+-    MatchFinder_ReadBlock(p);
+-}
+-
+ static void MatchFinder_CheckAndMoveAndRead(CMatchFinder *p)
+ {
+   if (MatchFinder_NeedMove(p))
+@@ -268,7 +266,7 @@ static void MatchFinder_SetLimits(CMatch
+   p->posLimit = p->pos + limit;
+ }
+ 
+-void MatchFinder_Init(CMatchFinder *p)
++static void MatchFinder_Init(CMatchFinder *p)
+ {
+   UInt32 i;
+   for (i = 0; i < p->hashSizeSum; i++)
+@@ -287,7 +285,7 @@ static UInt32 MatchFinder_GetSubValue(CM
+   return (p->pos - p->historySize - 1) & kNormalizeMask;
+ }
+ 
+-void MatchFinder_Normalize3(UInt32 subValue, CLzRef *items, UInt32 numItems)
++static void MatchFinder_Normalize3(UInt32 subValue, CLzRef *items, UInt32 numItems)
+ {
+   UInt32 i;
+   for (i = 0; i < numItems; i++)
+@@ -319,38 +317,7 @@ static void MatchFinder_CheckLimits(CMat
+   MatchFinder_SetLimits(p);
+ }
+ 
+-static UInt32 * Hc_GetMatchesSpec(UInt32 lenLimit, UInt32 curMatch, UInt32 pos, const Byte *cur, CLzRef *son,
+-    UInt32 _cyclicBufferPos, UInt32 _cyclicBufferSize, UInt32 cutValue,
+-    UInt32 *distances, UInt32 maxLen)
+-{
+-  son[_cyclicBufferPos] = curMatch;
+-  for (;;)
+-  {
+-    UInt32 delta = pos - curMatch;
+-    if (cutValue-- == 0 || delta >= _cyclicBufferSize)
+-      return distances;
+-    {
+-      const Byte *pb = cur - delta;
+-      curMatch = son[_cyclicBufferPos - delta + ((delta > _cyclicBufferPos) ? _cyclicBufferSize : 0)];
+-      if (pb[maxLen] == cur[maxLen] && *pb == *cur)
+-      {
+-        UInt32 len = 0;
+-        while (++len != lenLimit)
+-          if (pb[len] != cur[len])
+-            break;
+-        if (maxLen < len)
+-        {
+-          *distances++ = maxLen = len;
+-          *distances++ = delta - 1;
+-          if (len == lenLimit)
+-            return distances;
+-        }
+-      }
+-    }
+-  }
+-}
+-
+-UInt32 * GetMatchesSpec1(UInt32 lenLimit, UInt32 curMatch, UInt32 pos, const Byte *cur, CLzRef *son,
++static UInt32 * GetMatchesSpec1(UInt32 lenLimit, UInt32 curMatch, UInt32 pos, const Byte *cur, CLzRef *son,
+     UInt32 _cyclicBufferPos, UInt32 _cyclicBufferSize, UInt32 cutValue,
+     UInt32 *distances, UInt32 maxLen)
+ {
+@@ -460,10 +427,10 @@ static void SkipMatchesSpec(UInt32 lenLi
+   p->buffer++; \
+   if (++p->pos == p->posLimit) MatchFinder_CheckLimits(p);
+ 
+-#define MOVE_POS_RET MOVE_POS return offset;
+-
+ static void MatchFinder_MovePos(CMatchFinder *p) { MOVE_POS; }
+ 
++#define MOVE_POS_RET MatchFinder_MovePos(p); return offset;
++
+ #define GET_MATCHES_HEADER2(minLen, ret_op) \
+   UInt32 lenLimit; UInt32 hashValue; const Byte *cur; UInt32 curMatch; \
+   lenLimit = p->lenLimit; { if (lenLimit < minLen) { MatchFinder_MovePos(p); ret_op; }} \
+@@ -479,62 +446,7 @@ static void MatchFinder_MovePos(CMatchFi
+   distances + offset, maxLen) - distances); MOVE_POS_RET;
+ 
+ #define SKIP_FOOTER \
+-  SkipMatchesSpec(lenLimit, curMatch, MF_PARAMS(p)); MOVE_POS;
+-
+-static UInt32 Bt2_MatchFinder_GetMatches(CMatchFinder *p, UInt32 *distances)
+-{
+-  UInt32 offset;
+-  GET_MATCHES_HEADER(2)
+-  HASH2_CALC;
+-  curMatch = p->hash[hashValue];
+-  p->hash[hashValue] = p->pos;
+-  offset = 0;
+-  GET_MATCHES_FOOTER(offset, 1)
+-}
+-
+-UInt32 Bt3Zip_MatchFinder_GetMatches(CMatchFinder *p, UInt32 *distances)
+-{
+-  UInt32 offset;
+-  GET_MATCHES_HEADER(3)
+-  HASH_ZIP_CALC;
+-  curMatch = p->hash[hashValue];
+-  p->hash[hashValue] = p->pos;
+-  offset = 0;
+-  GET_MATCHES_FOOTER(offset, 2)
+-}
+-
+-static UInt32 Bt3_MatchFinder_GetMatches(CMatchFinder *p, UInt32 *distances)
+-{
+-  UInt32 hash2Value, delta2, maxLen, offset;
+-  GET_MATCHES_HEADER(3)
+-
+-  HASH3_CALC;
+-
+-  delta2 = p->pos - p->hash[hash2Value];
+-  curMatch = p->hash[kFix3HashSize + hashValue];
+-  
+-  p->hash[hash2Value] =
+-  p->hash[kFix3HashSize + hashValue] = p->pos;
+-
+-
+-  maxLen = 2;
+-  offset = 0;
+-  if (delta2 < p->cyclicBufferSize && *(cur - delta2) == *cur)
+-  {
+-    for (; maxLen != lenLimit; maxLen++)
+-      if (cur[(ptrdiff_t)maxLen - delta2] != cur[maxLen])
+-        break;
+-    distances[0] = maxLen;
+-    distances[1] = delta2 - 1;
+-    offset = 2;
+-    if (maxLen == lenLimit)
+-    {
+-      SkipMatchesSpec(lenLimit, curMatch, MF_PARAMS(p));
+-      MOVE_POS_RET;
+-    }
+-  }
+-  GET_MATCHES_FOOTER(offset, maxLen)
+-}
++  SkipMatchesSpec(lenLimit, curMatch, MF_PARAMS(p)); MatchFinder_MovePos(p);
+ 
+ static UInt32 Bt4_MatchFinder_GetMatches(CMatchFinder *p, UInt32 *distances)
+ {
+@@ -583,108 +495,6 @@ static UInt32 Bt4_MatchFinder_GetMatches
+   GET_MATCHES_FOOTER(offset, maxLen)
+ }
+ 
+-static UInt32 Hc4_MatchFinder_GetMatches(CMatchFinder *p, UInt32 *distances)
+-{
+-  UInt32 hash2Value, hash3Value, delta2, delta3, maxLen, offset;
+-  GET_MATCHES_HEADER(4)
+-
+-  HASH4_CALC;
+-
+-  delta2 = p->pos - p->hash[                hash2Value];
+-  delta3 = p->pos - p->hash[kFix3HashSize + hash3Value];
+-  curMatch = p->hash[kFix4HashSize + hashValue];
+-
+-  p->hash[                hash2Value] =
+-  p->hash[kFix3HashSize + hash3Value] =
+-  p->hash[kFix4HashSize + hashValue] = p->pos;
+-
+-  maxLen = 1;
+-  offset = 0;
+-  if (delta2 < p->cyclicBufferSize && *(cur - delta2) == *cur)
+-  {
+-    distances[0] = maxLen = 2;
+-    distances[1] = delta2 - 1;
+-    offset = 2;
+-  }
+-  if (delta2 != delta3 && delta3 < p->cyclicBufferSize && *(cur - delta3) == *cur)
+-  {
+-    maxLen = 3;
+-    distances[offset + 1] = delta3 - 1;
+-    offset += 2;
+-    delta2 = delta3;
+-  }
+-  if (offset != 0)
+-  {
+-    for (; maxLen != lenLimit; maxLen++)
+-      if (cur[(ptrdiff_t)maxLen - delta2] != cur[maxLen])
+-        break;
+-    distances[offset - 2] = maxLen;
+-    if (maxLen == lenLimit)
+-    {
+-      p->son[p->cyclicBufferPos] = curMatch;
+-      MOVE_POS_RET;
+-    }
+-  }
+-  if (maxLen < 3)
+-    maxLen = 3;
+-  offset = (UInt32)(Hc_GetMatchesSpec(lenLimit, curMatch, MF_PARAMS(p),
+-    distances + offset, maxLen) - (distances));
+-  MOVE_POS_RET
+-}
+-
+-UInt32 Hc3Zip_MatchFinder_GetMatches(CMatchFinder *p, UInt32 *distances)
+-{
+-  UInt32 offset;
+-  GET_MATCHES_HEADER(3)
+-  HASH_ZIP_CALC;
+-  curMatch = p->hash[hashValue];
+-  p->hash[hashValue] = p->pos;
+-  offset = (UInt32)(Hc_GetMatchesSpec(lenLimit, curMatch, MF_PARAMS(p),
+-    distances, 2) - (distances));
+-  MOVE_POS_RET
+-}
+-
+-static void Bt2_MatchFinder_Skip(CMatchFinder *p, UInt32 num)
+-{
+-  do
+-  {
+-    SKIP_HEADER(2)
+-    HASH2_CALC;
+-    curMatch = p->hash[hashValue];
+-    p->hash[hashValue] = p->pos;
+-    SKIP_FOOTER
+-  }
+-  while (--num != 0);
+-}
+-
+-void Bt3Zip_MatchFinder_Skip(CMatchFinder *p, UInt32 num)
+-{
+-  do
+-  {
+-    SKIP_HEADER(3)
+-    HASH_ZIP_CALC;
+-    curMatch = p->hash[hashValue];
+-    p->hash[hashValue] = p->pos;
+-    SKIP_FOOTER
+-  }
+-  while (--num != 0);
+-}
+-
+-static void Bt3_MatchFinder_Skip(CMatchFinder *p, UInt32 num)
+-{
+-  do
+-  {
+-    UInt32 hash2Value;
+-    SKIP_HEADER(3)
+-    HASH3_CALC;
+-    curMatch = p->hash[kFix3HashSize + hashValue];
+-    p->hash[hash2Value] =
+-    p->hash[kFix3HashSize + hashValue] = p->pos;
+-    SKIP_FOOTER
+-  }
+-  while (--num != 0);
+-}
+-
+ static void Bt4_MatchFinder_Skip(CMatchFinder *p, UInt32 num)
+ {
+   do
+@@ -701,61 +511,12 @@ static void Bt4_MatchFinder_Skip(CMatchF
+   while (--num != 0);
+ }
+ 
+-static void Hc4_MatchFinder_Skip(CMatchFinder *p, UInt32 num)
+-{
+-  do
+-  {
+-    UInt32 hash2Value, hash3Value;
+-    SKIP_HEADER(4)
+-    HASH4_CALC;
+-    curMatch = p->hash[kFix4HashSize + hashValue];
+-    p->hash[                hash2Value] =
+-    p->hash[kFix3HashSize + hash3Value] =
+-    p->hash[kFix4HashSize + hashValue] = p->pos;
+-    p->son[p->cyclicBufferPos] = curMatch;
+-    MOVE_POS
+-  }
+-  while (--num != 0);
+-}
+-
+-void Hc3Zip_MatchFinder_Skip(CMatchFinder *p, UInt32 num)
+-{
+-  do
+-  {
+-    SKIP_HEADER(3)
+-    HASH_ZIP_CALC;
+-    curMatch = p->hash[hashValue];
+-    p->hash[hashValue] = p->pos;
+-    p->son[p->cyclicBufferPos] = curMatch;
+-    MOVE_POS
+-  }
+-  while (--num != 0);
+-}
+-
+ void MatchFinder_CreateVTable(CMatchFinder *p, IMatchFinder *vTable)
+ {
+   vTable->Init = (Mf_Init_Func)MatchFinder_Init;
+   vTable->GetIndexByte = (Mf_GetIndexByte_Func)MatchFinder_GetIndexByte;
+   vTable->GetNumAvailableBytes = (Mf_GetNumAvailableBytes_Func)MatchFinder_GetNumAvailableBytes;
+   vTable->GetPointerToCurrentPos = (Mf_GetPointerToCurrentPos_Func)MatchFinder_GetPointerToCurrentPos;
+-  if (!p->btMode)
+-  {
+-    vTable->GetMatches = (Mf_GetMatches_Func)Hc4_MatchFinder_GetMatches;
+-    vTable->Skip = (Mf_Skip_Func)Hc4_MatchFinder_Skip;
+-  }
+-  else if (p->numHashBytes == 2)
+-  {
+-    vTable->GetMatches = (Mf_GetMatches_Func)Bt2_MatchFinder_GetMatches;
+-    vTable->Skip = (Mf_Skip_Func)Bt2_MatchFinder_Skip;
+-  }
+-  else if (p->numHashBytes == 3)
+-  {
+-    vTable->GetMatches = (Mf_GetMatches_Func)Bt3_MatchFinder_GetMatches;
+-    vTable->Skip = (Mf_Skip_Func)Bt3_MatchFinder_Skip;
+-  }
+-  else
+-  {
+-    vTable->GetMatches = (Mf_GetMatches_Func)Bt4_MatchFinder_GetMatches;
+-    vTable->Skip = (Mf_Skip_Func)Bt4_MatchFinder_Skip;
+-  }
++  vTable->GetMatches = (Mf_GetMatches_Func)Bt4_MatchFinder_GetMatches;
++  vTable->Skip = (Mf_Skip_Func)Bt4_MatchFinder_Skip;
+ }
+--- a/lib/lzma/LzmaDec.c
++++ b/lib/lzma/LzmaDec.c
+@@ -682,7 +682,7 @@ static void LzmaDec_InitRc(CLzmaDec *p,
+   p->needFlush = 0;
+ }
+ 
+-void LzmaDec_InitDicAndState(CLzmaDec *p, Bool initDic, Bool initState)
++static void LzmaDec_InitDicAndState(CLzmaDec *p, Bool initDic, Bool initState)
+ {
+   p->needFlush = 1;
+   p->remainLen = 0;
+@@ -698,7 +698,7 @@ void LzmaDec_InitDicAndState(CLzmaDec *p
+     p->needInitState = 1;
+ }
+ 
+-void LzmaDec_Init(CLzmaDec *p)
++static void LzmaDec_Init(CLzmaDec *p)
+ {
+   p->dicPos = 0;
+   LzmaDec_InitDicAndState(p, True, True);
+@@ -716,7 +716,7 @@ static void LzmaDec_InitStateReal(CLzmaD
+   p->needInitState = 0;
+ }
+ 
+-SRes LzmaDec_DecodeToDic(CLzmaDec *p, SizeT dicLimit, const Byte *src, SizeT *srcLen,
++static SRes LzmaDec_DecodeToDic(CLzmaDec *p, SizeT dicLimit, const Byte *src, SizeT *srcLen,
+     ELzmaFinishMode finishMode, ELzmaStatus *status)
+ {
+   SizeT inSize = *srcLen;
+@@ -837,65 +837,13 @@ SRes LzmaDec_DecodeToDic(CLzmaDec *p, Si
+   return (p->code == 0) ? SZ_OK : SZ_ERROR_DATA;
+ }
+ 
+-SRes LzmaDec_DecodeToBuf(CLzmaDec *p, Byte *dest, SizeT *destLen, const Byte *src, SizeT *srcLen, ELzmaFinishMode finishMode, ELzmaStatus *status)
+-{
+-  SizeT outSize = *destLen;
+-  SizeT inSize = *srcLen;
+-  *srcLen = *destLen = 0;
+-  for (;;)
+-  {
+-    SizeT inSizeCur = inSize, outSizeCur, dicPos;
+-    ELzmaFinishMode curFinishMode;
+-    SRes res;
+-    if (p->dicPos == p->dicBufSize)
+-      p->dicPos = 0;
+-    dicPos = p->dicPos;
+-    if (outSize > p->dicBufSize - dicPos)
+-    {
+-      outSizeCur = p->dicBufSize;
+-      curFinishMode = LZMA_FINISH_ANY;
+-    }
+-    else
+-    {
+-      outSizeCur = dicPos + outSize;
+-      curFinishMode = finishMode;
+-    }
+-
+-    res = LzmaDec_DecodeToDic(p, outSizeCur, src, &inSizeCur, curFinishMode, status);
+-    src += inSizeCur;
+-    inSize -= inSizeCur;
+-    *srcLen += inSizeCur;
+-    outSizeCur = p->dicPos - dicPos;
+-    memcpy(dest, p->dic + dicPos, outSizeCur);
+-    dest += outSizeCur;
+-    outSize -= outSizeCur;
+-    *destLen += outSizeCur;
+-    if (res != 0)
+-      return res;
+-    if (outSizeCur == 0 || outSize == 0)
+-      return SZ_OK;
+-  }
+-}
+-
+-void LzmaDec_FreeProbs(CLzmaDec *p, ISzAlloc *alloc)
++static void LzmaDec_FreeProbs(CLzmaDec *p, ISzAlloc *alloc)
+ {
+   alloc->Free(alloc, p->probs);
+   p->probs = 0;
+ }
+ 
+-static void LzmaDec_FreeDict(CLzmaDec *p, ISzAlloc *alloc)
+-{
+-  alloc->Free(alloc, p->dic);
+-  p->dic = 0;
+-}
+-
+-void LzmaDec_Free(CLzmaDec *p, ISzAlloc *alloc)
+-{
+-  LzmaDec_FreeProbs(p, alloc);
+-  LzmaDec_FreeDict(p, alloc);
+-}
+-
+-SRes LzmaProps_Decode(CLzmaProps *p, const Byte *data, unsigned size)
++static SRes LzmaProps_Decode(CLzmaProps *p, const Byte *data, unsigned size)
+ {
+   UInt32 dicSize;
+   Byte d;
+@@ -935,7 +883,7 @@ static SRes LzmaDec_AllocateProbs2(CLzma
+   return SZ_OK;
+ }
+ 
+-SRes LzmaDec_AllocateProbs(CLzmaDec *p, const Byte *props, unsigned propsSize, ISzAlloc *alloc)
++static SRes LzmaDec_AllocateProbs(CLzmaDec *p, const Byte *props, unsigned propsSize, ISzAlloc *alloc)
+ {
+   CLzmaProps propNew;
+   RINOK(LzmaProps_Decode(&propNew, props, propsSize));
+@@ -943,28 +891,6 @@ SRes LzmaDec_AllocateProbs(CLzmaDec *p,
+   p->prop = propNew;
+   return SZ_OK;
+ }
+-
+-SRes LzmaDec_Allocate(CLzmaDec *p, const Byte *props, unsigned propsSize, ISzAlloc *alloc)
+-{
+-  CLzmaProps propNew;
+-  SizeT dicBufSize;
+-  RINOK(LzmaProps_Decode(&propNew, props, propsSize));
+-  RINOK(LzmaDec_AllocateProbs2(p, &propNew, alloc));
+-  dicBufSize = propNew.dicSize;
+-  if (p->dic == 0 || dicBufSize != p->dicBufSize)
+-  {
+-    LzmaDec_FreeDict(p, alloc);
+-    p->dic = (Byte *)alloc->Alloc(alloc, dicBufSize);
+-    if (p->dic == 0)
+-    {
+-      LzmaDec_FreeProbs(p, alloc);
+-      return SZ_ERROR_MEM;
+-    }
+-  }
+-  p->dicBufSize = dicBufSize;
+-  p->prop = propNew;
+-  return SZ_OK;
+-}
+ 
+ SRes LzmaDecode(Byte *dest, SizeT *destLen, const Byte *src, SizeT *srcLen,
+     const Byte *propData, unsigned propSize, ELzmaFinishMode finishMode,
+--- a/lib/lzma/LzmaEnc.c
++++ b/lib/lzma/LzmaEnc.c
+@@ -53,7 +53,7 @@ void LzmaEncProps_Init(CLzmaEncProps *p)
+   p->writeEndMark = 0;
+ }
+ 
+-void LzmaEncProps_Normalize(CLzmaEncProps *p)
++static void LzmaEncProps_Normalize(CLzmaEncProps *p)
+ {
+   int level = p->level;
+   if (level < 0) level = 5;
+@@ -76,7 +76,7 @@ void LzmaEncProps_Normalize(CLzmaEncProp
+       #endif
+ }
+ 
+-UInt32 LzmaEncProps_GetDictSize(const CLzmaEncProps *props2)
++static UInt32 __maybe_unused LzmaEncProps_GetDictSize(const CLzmaEncProps *props2)
+ {
+   CLzmaEncProps props = *props2;
+   LzmaEncProps_Normalize(&props);
+@@ -93,7 +93,7 @@ UInt32 LzmaEncProps_GetDictSize(const CL
+ 
+ #define BSR2_RET(pos, res) { unsigned long i; _BitScanReverse(&i, (pos)); res = (i + i) + ((pos >> (i - 1)) & 1); }
+ 
+-UInt32 GetPosSlot1(UInt32 pos)
++static UInt32 GetPosSlot1(UInt32 pos)
+ {
+   UInt32 res;
+   BSR2_RET(pos, res);
+@@ -107,7 +107,7 @@ UInt32 GetPosSlot1(UInt32 pos)
+ #define kNumLogBits (9 + (int)sizeof(size_t) / 2)
+ #define kDicLogSizeMaxCompress ((kNumLogBits - 1) * 2 + 7)
+ 
+-void LzmaEnc_FastPosInit(Byte *g_FastPos)
++static void LzmaEnc_FastPosInit(Byte *g_FastPos)
+ {
+   int c = 2, slotFast;
+   g_FastPos[0] = 0;
+@@ -339,58 +339,6 @@ typedef struct
+   CSaveState saveState;
+ } CLzmaEnc;
+ 
+-void LzmaEnc_SaveState(CLzmaEncHandle pp)
+-{
+-  CLzmaEnc *p = (CLzmaEnc *)pp;
+-  CSaveState *dest = &p->saveState;
+-  int i;
+-  dest->lenEnc = p->lenEnc;
+-  dest->repLenEnc = p->repLenEnc;
+-  dest->state = p->state;
+-
+-  for (i = 0; i < kNumStates; i++)
+-  {
+-    memcpy(dest->isMatch[i], p->isMatch[i], sizeof(p->isMatch[i]));
+-    memcpy(dest->isRep0Long[i], p->isRep0Long[i], sizeof(p->isRep0Long[i]));
+-  }
+-  for (i = 0; i < kNumLenToPosStates; i++)
+-    memcpy(dest->posSlotEncoder[i], p->posSlotEncoder[i], sizeof(p->posSlotEncoder[i]));
+-  memcpy(dest->isRep, p->isRep, sizeof(p->isRep));
+-  memcpy(dest->isRepG0, p->isRepG0, sizeof(p->isRepG0));
+-  memcpy(dest->isRepG1, p->isRepG1, sizeof(p->isRepG1));
+-  memcpy(dest->isRepG2, p->isRepG2, sizeof(p->isRepG2));
+-  memcpy(dest->posEncoders, p->posEncoders, sizeof(p->posEncoders));
+-  memcpy(dest->posAlignEncoder, p->posAlignEncoder, sizeof(p->posAlignEncoder));
+-  memcpy(dest->reps, p->reps, sizeof(p->reps));
+-  memcpy(dest->litProbs, p->litProbs, (0x300 << p->lclp) * sizeof(CLzmaProb));
+-}
+-
+-void LzmaEnc_RestoreState(CLzmaEncHandle pp)
+-{
+-  CLzmaEnc *dest = (CLzmaEnc *)pp;
+-  const CSaveState *p = &dest->saveState;
+-  int i;
+-  dest->lenEnc = p->lenEnc;
+-  dest->repLenEnc = p->repLenEnc;
+-  dest->state = p->state;
+-
+-  for (i = 0; i < kNumStates; i++)
+-  {
+-    memcpy(dest->isMatch[i], p->isMatch[i], sizeof(p->isMatch[i]));
+-    memcpy(dest->isRep0Long[i], p->isRep0Long[i], sizeof(p->isRep0Long[i]));
+-  }
+-  for (i = 0; i < kNumLenToPosStates; i++)
+-    memcpy(dest->posSlotEncoder[i], p->posSlotEncoder[i], sizeof(p->posSlotEncoder[i]));
+-  memcpy(dest->isRep, p->isRep, sizeof(p->isRep));
+-  memcpy(dest->isRepG0, p->isRepG0, sizeof(p->isRepG0));
+-  memcpy(dest->isRepG1, p->isRepG1, sizeof(p->isRepG1));
+-  memcpy(dest->isRepG2, p->isRepG2, sizeof(p->isRepG2));
+-  memcpy(dest->posEncoders, p->posEncoders, sizeof(p->posEncoders));
+-  memcpy(dest->posAlignEncoder, p->posAlignEncoder, sizeof(p->posAlignEncoder));
+-  memcpy(dest->reps, p->reps, sizeof(p->reps));
+-  memcpy(dest->litProbs, p->litProbs, (0x300 << dest->lclp) * sizeof(CLzmaProb));
+-}
+-
+ SRes LzmaEnc_SetProps(CLzmaEncHandle pp, const CLzmaEncProps *props2)
+ {
+   CLzmaEnc *p = (CLzmaEnc *)pp;
+@@ -600,7 +548,7 @@ static void LitEnc_EncodeMatched(CRangeE
+   while (symbol < 0x10000);
+ }
+ 
+-void LzmaEnc_InitPriceTables(UInt32 *ProbPrices)
++static void LzmaEnc_InitPriceTables(UInt32 *ProbPrices)
+ {
+   UInt32 i;
+   for (i = (1 << kNumMoveReducingBits) / 2; i < kBitModelTotal; i += (1 << kNumMoveReducingBits))
+@@ -1676,7 +1624,7 @@ static void FillDistancesPrices(CLzmaEnc
+   p->matchPriceCount = 0;
+ }
+ 
+-void LzmaEnc_Construct(CLzmaEnc *p)
++static void LzmaEnc_Construct(CLzmaEnc *p)
+ {
+   RangeEnc_Construct(&p->rc);
+   MatchFinder_Construct(&p->matchFinderBase);
+@@ -1709,7 +1657,7 @@ CLzmaEncHandle LzmaEnc_Create(ISzAlloc *
+   return p;
+ }
+ 
+-void LzmaEnc_FreeLits(CLzmaEnc *p, ISzAlloc *alloc)
++static void LzmaEnc_FreeLits(CLzmaEnc *p, ISzAlloc *alloc)
+ {
+   alloc->Free(alloc, p->litProbs);
+   alloc->Free(alloc, p->saveState.litProbs);
+@@ -1717,7 +1665,7 @@ void LzmaEnc_FreeLits(CLzmaEnc *p, ISzAl
+   p->saveState.litProbs = 0;
+ }
+ 
+-void LzmaEnc_Destruct(CLzmaEnc *p, ISzAlloc *alloc, ISzAlloc *allocBig)
++static void LzmaEnc_Destruct(CLzmaEnc *p, ISzAlloc *alloc, ISzAlloc *allocBig)
+ {
+   #ifndef _7ZIP_ST
+   MatchFinderMt_Destruct(&p->matchFinderMt, allocBig);
+@@ -1947,7 +1895,7 @@ static SRes LzmaEnc_Alloc(CLzmaEnc *p, U
+   return SZ_OK;
+ }
+ 
+-void LzmaEnc_Init(CLzmaEnc *p)
++static void LzmaEnc_Init(CLzmaEnc *p)
+ {
+   UInt32 i;
+   p->state = 0;
+@@ -2005,7 +1953,7 @@ void LzmaEnc_Init(CLzmaEnc *p)
+   p->lpMask = (1 << p->lp) - 1;
+ }
+ 
+-void LzmaEnc_InitPrices(CLzmaEnc *p)
++static void LzmaEnc_InitPrices(CLzmaEnc *p)
+ {
+   if (!p->fastMode)
+   {
+@@ -2037,26 +1985,6 @@ static SRes LzmaEnc_AllocAndInit(CLzmaEn
+   return SZ_OK;
+ }
+ 
+-static SRes LzmaEnc_Prepare(CLzmaEncHandle pp, ISeqOutStream *outStream, ISeqInStream *inStream,
+-    ISzAlloc *alloc, ISzAlloc *allocBig)
+-{
+-  CLzmaEnc *p = (CLzmaEnc *)pp;
+-  p->matchFinderBase.stream = inStream;
+-  p->needInit = 1;
+-  p->rc.outStream = outStream;
+-  return LzmaEnc_AllocAndInit(p, 0, alloc, allocBig);
+-}
+-
+-SRes LzmaEnc_PrepareForLzma2(CLzmaEncHandle pp,
+-    ISeqInStream *inStream, UInt32 keepWindowSize,
+-    ISzAlloc *alloc, ISzAlloc *allocBig)
+-{
+-  CLzmaEnc *p = (CLzmaEnc *)pp;
+-  p->matchFinderBase.stream = inStream;
+-  p->needInit = 1;
+-  return LzmaEnc_AllocAndInit(p, keepWindowSize, alloc, allocBig);
+-}
+-
+ static void LzmaEnc_SetInputBuf(CLzmaEnc *p, const Byte *src, SizeT srcLen)
+ {
+   p->matchFinderBase.directInput = 1;
+@@ -2064,7 +1992,7 @@ static void LzmaEnc_SetInputBuf(CLzmaEnc
+   p->matchFinderBase.directInputRem = srcLen;
+ }
+ 
+-SRes LzmaEnc_MemPrepare(CLzmaEncHandle pp, const Byte *src, SizeT srcLen,
++static SRes LzmaEnc_MemPrepare(CLzmaEncHandle pp, const Byte *src, SizeT srcLen,
+     UInt32 keepWindowSize, ISzAlloc *alloc, ISzAlloc *allocBig)
+ {
+   CLzmaEnc *p = (CLzmaEnc *)pp;
+@@ -2074,7 +2002,7 @@ SRes LzmaEnc_MemPrepare(CLzmaEncHandle p
+   return LzmaEnc_AllocAndInit(p, keepWindowSize, alloc, allocBig);
+ }
+ 
+-void LzmaEnc_Finish(CLzmaEncHandle pp)
++static void LzmaEnc_Finish(CLzmaEncHandle pp)
+ {
+   #ifndef _7ZIP_ST
+   CLzmaEnc *p = (CLzmaEnc *)pp;
+@@ -2107,53 +2035,6 @@ static size_t MyWrite(void *pp, const vo
+   return size;
+ }
+ 
+-
+-UInt32 LzmaEnc_GetNumAvailableBytes(CLzmaEncHandle pp)
+-{
+-  const CLzmaEnc *p = (CLzmaEnc *)pp;
+-  return p->matchFinder.GetNumAvailableBytes(p->matchFinderObj);
+-}
+-
+-const Byte *LzmaEnc_GetCurBuf(CLzmaEncHandle pp)
+-{
+-  const CLzmaEnc *p = (CLzmaEnc *)pp;
+-  return p->matchFinder.GetPointerToCurrentPos(p->matchFinderObj) - p->additionalOffset;
+-}
+-
+-SRes LzmaEnc_CodeOneMemBlock(CLzmaEncHandle pp, Bool reInit,
+-    Byte *dest, size_t *destLen, UInt32 desiredPackSize, UInt32 *unpackSize)
+-{
+-  CLzmaEnc *p = (CLzmaEnc *)pp;
+-  UInt64 nowPos64;
+-  SRes res;
+-  CSeqOutStreamBuf outStream;
+-
+-  outStream.funcTable.Write = MyWrite;
+-  outStream.data = dest;
+-  outStream.rem = *destLen;
+-  outStream.overflow = False;
+-
+-  p->writeEndMark = False;
+-  p->finished = False;
+-  p->result = SZ_OK;
+-
+-  if (reInit)
+-    LzmaEnc_Init(p);
+-  LzmaEnc_InitPrices(p);
+-  nowPos64 = p->nowPos64;
+-  RangeEnc_Init(&p->rc);
+-  p->rc.outStream = &outStream.funcTable;
+-
+-  res = LzmaEnc_CodeOneBlock(p, True, desiredPackSize, *unpackSize);
+-  
+-  *unpackSize = (UInt32)(p->nowPos64 - nowPos64);
+-  *destLen -= outStream.rem;
+-  if (outStream.overflow)
+-    return SZ_ERROR_OUTPUT_EOF;
+-
+-  return res;
+-}
+-
+ static SRes LzmaEnc_Encode2(CLzmaEnc *p, ICompressProgress *progress)
+ {
+   SRes res = SZ_OK;
+@@ -2184,13 +2065,6 @@ static SRes LzmaEnc_Encode2(CLzmaEnc *p,
+   return res;
+ }
+ 
+-SRes LzmaEnc_Encode(CLzmaEncHandle pp, ISeqOutStream *outStream, ISeqInStream *inStream, ICompressProgress *progress,
+-    ISzAlloc *alloc, ISzAlloc *allocBig)
+-{
+-  RINOK(LzmaEnc_Prepare(pp, outStream, inStream, alloc, allocBig));
+-  return LzmaEnc_Encode2((CLzmaEnc *)pp, progress);
+-}
+-
+ SRes LzmaEnc_WriteProperties(CLzmaEncHandle pp, Byte *props, SizeT *size)
+ {
+   CLzmaEnc *p = (CLzmaEnc *)pp;
+@@ -2247,25 +2121,3 @@ SRes LzmaEnc_MemEncode(CLzmaEncHandle pp
+     return SZ_ERROR_OUTPUT_EOF;
+   return res;
+ }
+-
+-SRes LzmaEncode(Byte *dest, SizeT *destLen, const Byte *src, SizeT srcLen,
+-    const CLzmaEncProps *props, Byte *propsEncoded, SizeT *propsSize, int writeEndMark,
+-    ICompressProgress *progress, ISzAlloc *alloc, ISzAlloc *allocBig)
+-{
+-  CLzmaEnc *p = (CLzmaEnc *)LzmaEnc_Create(alloc);
+-  SRes res;
+-  if (p == 0)
+-    return SZ_ERROR_MEM;
+-
+-  res = LzmaEnc_SetProps(p, props);
+-  if (res == SZ_OK)
+-  {
+-    res = LzmaEnc_WriteProperties(p, propsEncoded, propsSize);
+-    if (res == SZ_OK)
+-      res = LzmaEnc_MemEncode(p, dest, destLen, src, srcLen,
+-          writeEndMark, progress, alloc, allocBig);
+-  }
+-
+-  LzmaEnc_Destroy(p, alloc, allocBig);
+-  return res;
+-}
diff --git a/target/linux/generic/hack-5.4/550-loop-Report-EOPNOTSUPP-properly.patch b/target/linux/generic/hack-5.4/550-loop-Report-EOPNOTSUPP-properly.patch
new file mode 100644
index 0000000000..023de0078d
--- /dev/null
+++ b/target/linux/generic/hack-5.4/550-loop-Report-EOPNOTSUPP-properly.patch
@@ -0,0 +1,41 @@
+From 2e864386e62e702a343be2507062ee08d5dfc810 Mon Sep 17 00:00:00 2001
+From: Evan Green <evgreen@chromium.org>
+Date: Thu, 14 Nov 2019 15:50:07 -0800
+Subject: loop: Report EOPNOTSUPP properly
+
+Properly plumb out EOPNOTSUPP from loop driver operations, which may
+get returned when for instance a discard operation is attempted but not
+supported by the underlying block device. Before this change, everything
+was reported in the log as an I/O error, which is scary and not
+helpful in debugging.
+
+Signed-off-by: Evan Green <evgreen@chromium.org>
+Reviewed-by: Gwendal Grignou <gwendal@chromium.org>
+Reviewed-by: Bart Van Assche <bvanassche@acm.org>
+---
+ drivers/block/loop.c | 7 +++++--
+ 1 file changed, 5 insertions(+), 2 deletions(-)
+
+--- a/drivers/block/loop.c
++++ b/drivers/block/loop.c
+@@ -460,7 +460,7 @@ static void lo_complete_rq(struct reques
+ 	if (!cmd->use_aio || cmd->ret < 0 || cmd->ret == blk_rq_bytes(rq) ||
+ 	    req_op(rq) != REQ_OP_READ) {
+ 		if (cmd->ret < 0)
+-			ret = BLK_STS_IOERR;
++			ret = errno_to_blk_status(cmd->ret);
+ 		goto end_io;
+ 	}
+ 
+@@ -1904,7 +1904,10 @@ static void loop_handle_cmd(struct loop_
+  failed:
+ 	/* complete non-aio request */
+ 	if (!cmd->use_aio || ret) {
+-		cmd->ret = ret ? -EIO : 0;
++		if (ret == -EOPNOTSUPP)
++			cmd->ret = ret;
++		else
++			cmd->ret = ret ? -EIO : 0;
+ 		blk_mq_complete_request(rq);
+ 	}
+ }
diff --git a/target/linux/generic/hack-5.4/551-loop-Better-discard-support-for-block-devices.patch b/target/linux/generic/hack-5.4/551-loop-Better-discard-support-for-block-devices.patch
new file mode 100644
index 0000000000..ac393e5f13
--- /dev/null
+++ b/target/linux/generic/hack-5.4/551-loop-Better-discard-support-for-block-devices.patch
@@ -0,0 +1,101 @@
+From 3117c3f45edbcc269baaebd3d13f39b7bf884aa6 Mon Sep 17 00:00:00 2001
+From: Evan Green <evgreen@chromium.org>
+Date: Thu, 14 Nov 2019 15:50:08 -0800
+Subject: loop: Better discard support for block devices
+
+If the backing device for a loop device is itself a block device,
+then mirror the "write zeroes" capabilities of the underlying
+block device into the loop device. Copy this capability into both
+max_write_zeroes_sectors and max_discard_sectors of the loop device.
+
+The reason for this is that REQ_OP_DISCARD on a loop device translates
+into blkdev_issue_zeroout(), rather than blkdev_issue_discard(). This
+presents a consistent interface for loop devices (that discarded data
+is zeroed), regardless of the backing device type of the loop device.
+There should be no behavior change for loop devices backed by regular
+files.
+
+This change fixes blktest block/003, and removes an extraneous
+error print in block/013 when testing on a loop device backed
+by a block device that does not support discard.
+
+Signed-off-by: Evan Green <evgreen@chromium.org>
+Reviewed-by: Gwendal Grignou <gwendal@chromium.org>
+Reviewed-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
+---
+ drivers/block/loop.c | 40 +++++++++++++++++++++++++++++-----------
+ 1 file changed, 29 insertions(+), 11 deletions(-)
+
+--- a/drivers/block/loop.c
++++ b/drivers/block/loop.c
+@@ -426,11 +426,12 @@ static int lo_fallocate(struct loop_devi
+ 	 * information.
+ 	 */
+ 	struct file *file = lo->lo_backing_file;
++	struct request_queue *q = lo->lo_queue;
+ 	int ret;
+ 
+ 	mode |= FALLOC_FL_KEEP_SIZE;
+ 
+-	if ((!file->f_op->fallocate) || lo->lo_encrypt_key_size) {
++	if (!blk_queue_discard(q)) {
+ 		ret = -EOPNOTSUPP;
+ 		goto out;
+ 	}
+@@ -863,6 +864,21 @@ static void loop_config_discard(struct l
+ 	struct file *file = lo->lo_backing_file;
+ 	struct inode *inode = file->f_mapping->host;
+ 	struct request_queue *q = lo->lo_queue;
++	struct request_queue *backingq;
++
++	/*
++	 * If the backing device is a block device, mirror its zeroing
++	 * capability. REQ_OP_DISCARD translates to a zero-out even when backed
++	 * by block devices to keep consistent behavior with file-backed loop
++	 * devices.
++	 */
++	if (S_ISBLK(inode->i_mode) && !lo->lo_encrypt_key_size) {
++		backingq = bdev_get_queue(inode->i_bdev);
++		blk_queue_max_discard_sectors(q,
++			backingq->limits.max_write_zeroes_sectors);
++
++		blk_queue_max_write_zeroes_sectors(q,
++			backingq->limits.max_write_zeroes_sectors);
+ 
+ 	/*
+ 	 * We use punch hole to reclaim the free space used by the
+@@ -870,22 +886,24 @@ static void loop_config_discard(struct l
+ 	 * encryption is enabled, because it may give an attacker
+ 	 * useful information.
+ 	 */
+-	if ((!file->f_op->fallocate) ||
+-	    lo->lo_encrypt_key_size) {
++	} else if ((!file->f_op->fallocate) || lo->lo_encrypt_key_size) {
+ 		q->limits.discard_granularity = 0;
+ 		q->limits.discard_alignment = 0;
+ 		blk_queue_max_discard_sectors(q, 0);
+ 		blk_queue_max_write_zeroes_sectors(q, 0);
+-		blk_queue_flag_clear(QUEUE_FLAG_DISCARD, q);
+-		return;
+-	}
+ 
+-	q->limits.discard_granularity = inode->i_sb->s_blocksize;
+-	q->limits.discard_alignment = 0;
++	} else {
++		q->limits.discard_granularity = inode->i_sb->s_blocksize;
++		q->limits.discard_alignment = 0;
+ 
+-	blk_queue_max_discard_sectors(q, UINT_MAX >> 9);
+-	blk_queue_max_write_zeroes_sectors(q, UINT_MAX >> 9);
+-	blk_queue_flag_set(QUEUE_FLAG_DISCARD, q);
++		blk_queue_max_discard_sectors(q, UINT_MAX >> 9);
++		blk_queue_max_write_zeroes_sectors(q, UINT_MAX >> 9);
++	}
++
++	if (q->limits.max_write_zeroes_sectors)
++		blk_queue_flag_set(QUEUE_FLAG_DISCARD, q);
++	else
++		blk_queue_flag_clear(QUEUE_FLAG_DISCARD, q);
+ }
+ 
+ static void loop_unprepare_queue(struct loop_device *lo)
diff --git a/target/linux/generic/hack-5.4/640-bridge-only-accept-EAP-locally.patch b/target/linux/generic/hack-5.4/640-bridge-only-accept-EAP-locally.patch
new file mode 100644
index 0000000000..f77a1965ca
--- /dev/null
+++ b/target/linux/generic/hack-5.4/640-bridge-only-accept-EAP-locally.patch
@@ -0,0 +1,82 @@
+From: Felix Fietkau <nbd@nbd.name>
+Date: Fri, 7 Jul 2017 17:18:54 +0200
+Subject: bridge: only accept EAP locally
+
+When bridging, do not forward EAP frames to other ports, only deliver
+them locally, regardless of the state.
+
+Signed-off-by: Felix Fietkau <nbd@nbd.name>
+[add disable_eap_hack sysfs attribute]
+Signed-off-by: Etienne Champetier <champetier.etienne@gmail.com>
+---
+
+--- a/net/bridge/br_input.c
++++ b/net/bridge/br_input.c
+@@ -108,10 +108,14 @@ int br_handle_frame_finish(struct net *n
+ 		}
+ 	}
+ 
++	BR_INPUT_SKB_CB(skb)->brdev = br->dev;
++
++	if (skb->protocol == htons(ETH_P_PAE) && !br->disable_eap_hack)
++		return br_pass_frame_up(skb);
++
+ 	if (p->state == BR_STATE_LEARNING)
+ 		goto drop;
+ 
+-	BR_INPUT_SKB_CB(skb)->brdev = br->dev;
+ 	BR_INPUT_SKB_CB(skb)->src_port_isolated = !!(p->flags & BR_ISOLATED);
+ 
+ 	if (IS_ENABLED(CONFIG_INET) &&
+--- a/net/bridge/br_private.h
++++ b/net/bridge/br_private.h
+@@ -337,6 +337,8 @@ struct net_bridge {
+ 	u16				group_fwd_mask;
+ 	u16				group_fwd_mask_required;
+ 
++	bool				disable_eap_hack;
++
+ 	/* STP */
+ 	bridge_id			designated_root;
+ 	bridge_id			bridge_id;
+--- a/net/bridge/br_sysfs_br.c
++++ b/net/bridge/br_sysfs_br.c
+@@ -170,6 +170,30 @@ static ssize_t group_fwd_mask_store(stru
+ }
+ static DEVICE_ATTR_RW(group_fwd_mask);
+ 
++static ssize_t disable_eap_hack_show(struct device *d,
++				   struct device_attribute *attr,
++				   char *buf)
++{
++	struct net_bridge *br = to_bridge(d);
++	return sprintf(buf, "%u\n", br->disable_eap_hack);
++}
++
++static int set_disable_eap_hack(struct net_bridge *br, unsigned long val)
++{
++	br->disable_eap_hack = !!val;
++
++	return 0;
++}
++
++static ssize_t disable_eap_hack_store(struct device *d,
++				    struct device_attribute *attr,
++				    const char *buf,
++				    size_t len)
++{
++	return store_bridge_parm(d, buf, len, set_disable_eap_hack);
++}
++static DEVICE_ATTR_RW(disable_eap_hack);
++
+ static ssize_t priority_show(struct device *d, struct device_attribute *attr,
+ 			     char *buf)
+ {
+@@ -810,6 +834,7 @@ static struct attribute *bridge_attrs[]
+ 	&dev_attr_ageing_time.attr,
+ 	&dev_attr_stp_state.attr,
+ 	&dev_attr_group_fwd_mask.attr,
++	&dev_attr_disable_eap_hack.attr,
+ 	&dev_attr_priority.attr,
+ 	&dev_attr_bridge_id.attr,
+ 	&dev_attr_root_id.attr,
diff --git a/target/linux/generic/hack-5.4/645-netfilter-connmark-introduce-set-dscpmark.patch b/target/linux/generic/hack-5.4/645-netfilter-connmark-introduce-set-dscpmark.patch
new file mode 100644
index 0000000000..a4f246d112
--- /dev/null
+++ b/target/linux/generic/hack-5.4/645-netfilter-connmark-introduce-set-dscpmark.patch
@@ -0,0 +1,212 @@
+From eda40b8c8c82e0f2789d6bc8bf63846dce2e8f32 Mon Sep 17 00:00:00 2001
+From: Kevin Darbyshire-Bryant <ldir@darbyshire-bryant.me.uk>
+Date: Sat, 23 Mar 2019 09:29:49 +0000
+Subject: [PATCH] netfilter: connmark: introduce set-dscpmark
+
+set-dscpmark is a method of storing the DSCP of an ip packet into
+conntrack mark.  In combination with a suitable tc filter action
+(act_ctinfo) DSCP values are able to be stored in the mark on egress and
+restored on ingress across links that otherwise alter or bleach DSCP.
+
+This is useful for qdiscs such as CAKE which are able to shape according
+to policies based on DSCP.
+
+Ingress classification is traditionally a challenging task since
+iptables rules haven't yet run and tc filter/eBPF programs are pre-NAT
+lookups, hence are unable to see internal IPv4 addresses as used on the
+typical home masquerading gateway.
+
+x_tables CONNMARK set-dscpmark target solves the problem of storing the
+DSCP to the conntrack mark in a way suitable for the new act_ctinfo tc
+action to restore.
+
+The set-dscpmark option accepts 2 parameters, a 32bit 'dscpmask' and a
+32bit 'statemask'.  The dscp mask must be 6 contiguous bits and
+represents the area where the DSCP will be stored in the connmark.  The
+state mask is a minimum 1 bit length mask that must not overlap with the
+dscpmask.  It represents a flag which is set when the DSCP has been
+stored in the conntrack mark. This is useful to implement a 'one shot'
+iptables based classification where the 'complicated' iptables rules are
+only run once to classify the connection on initial (egress) packet and
+subsequent packets are all marked/restored with the same DSCP.  A state
+mask of zero disables the setting of a status bit/s.
+
+example syntax with a suitably modified iptables user space application:
+
+iptables -A QOS_MARK_eth0 -t mangle -j CONNMARK --set-dscpmark 0xfc000000/0x01000000
+
+Would store the DSCP in the top 6 bits of the 32bit mark field, and use
+the LSB of the top byte as the 'DSCP has been stored' marker.
+
+|----0xFC----conntrack mark----000000---|
+| Bits 31-26 | bit 25 | bit24 |~~~ Bit 0|
+| DSCP       | unused | flag  |unused   |
+|-----------------------0x01---000000---|
+      ^                   ^
+      |                   |
+      ---|             Conditional flag
+         |             set this when dscp
+|-ip diffserv-|        stored in mark
+| 6 bits      |
+|-------------|
+
+an identically configured tc action to restore looks like:
+
+tc filter show dev eth0 ingress
+filter parent ffff: protocol all pref 10 u32 chain 0
+filter parent ffff: protocol all pref 10 u32 chain 0 fh 800: ht divisor 1
+filter parent ffff: protocol all pref 10 u32 chain 0 fh 800::800 order 2048 key ht 800 bkt 0 flowid 1: not_in_hw
+  match 00000000/00000000 at 0
+	action order 1: ctinfo zone 0 pipe
+	 index 2 ref 1 bind 1 dscp 0xfc000000/0x1000000
+
+	action order 2: mirred (Egress Redirect to device ifb4eth0) stolen
+	index 1 ref 1 bind 1
+
+|----0xFC----conntrack mark----000000---|
+| Bits 31-26 | bit 25 | bit24 |~~~ Bit 0|
+| DSCP       | unused | flag  |unused   |
+|-----------------------0x01---000000---|
+      |                   |
+      |                   |
+      ---|             Conditional flag
+         v             only restore if set
+|-ip diffserv-|
+| 6 bits      |
+|-------------|
+
+Signed-off-by: Kevin Darbyshire-Bryant <ldir@darbyshire-bryant.me.uk>
+---
+ include/uapi/linux/netfilter/xt_connmark.h | 10 ++++
+ net/netfilter/xt_connmark.c                | 55 ++++++++++++++++++----
+ 2 files changed, 57 insertions(+), 8 deletions(-)
+
+--- a/include/uapi/linux/netfilter/xt_connmark.h
++++ b/include/uapi/linux/netfilter/xt_connmark.h
+@@ -20,6 +20,11 @@ enum {
+ };
+ 
+ enum {
++	XT_CONNMARK_VALUE = BIT(0),
++	XT_CONNMARK_DSCP = BIT(1)
++};
++
++enum {
+ 	D_SHIFT_LEFT = 0,
+ 	D_SHIFT_RIGHT,
+ };
+@@ -34,6 +39,11 @@ struct xt_connmark_tginfo2 {
+ 	__u8 shift_dir, shift_bits, mode;
+ };
+ 
++struct xt_connmark_tginfo3 {
++	__u32 ctmark, ctmask, nfmask;
++	__u8 shift_dir, shift_bits, mode, func;
++};
++
+ struct xt_connmark_mtinfo1 {
+ 	__u32 mark, mask;
+ 	__u8 invert;
+--- a/net/netfilter/xt_connmark.c
++++ b/net/netfilter/xt_connmark.c
+@@ -36,12 +36,13 @@ MODULE_ALIAS("ipt_connmark");
+ MODULE_ALIAS("ip6t_connmark");
+ 
+ static unsigned int
+-connmark_tg_shift(struct sk_buff *skb, const struct xt_connmark_tginfo2 *info)
++connmark_tg_shift(struct sk_buff *skb, const struct xt_connmark_tginfo3 *info)
+ {
+ 	enum ip_conntrack_info ctinfo;
+ 	u_int32_t new_targetmark;
+ 	struct nf_conn *ct;
+ 	u_int32_t newmark;
++	u_int8_t dscp;
+ 
+ 	ct = nf_ct_get(skb, &ctinfo);
+ 	if (ct == NULL)
+@@ -49,12 +50,24 @@ connmark_tg_shift(struct sk_buff *skb, c
+ 
+ 	switch (info->mode) {
+ 	case XT_CONNMARK_SET:
+-		newmark = (ct->mark & ~info->ctmask) ^ info->ctmark;
+-		if (info->shift_dir == D_SHIFT_RIGHT)
+-			newmark >>= info->shift_bits;
+-		else
+-			newmark <<= info->shift_bits;
++		newmark = ct->mark;
++		if (info->func & XT_CONNMARK_VALUE) {
++			newmark = (newmark & ~info->ctmask) ^ info->ctmark;
++			if (info->shift_dir == D_SHIFT_RIGHT)
++				newmark >>= info->shift_bits;
++			else
++				newmark <<= info->shift_bits;
++		} else if (info->func & XT_CONNMARK_DSCP) {
++			if (skb->protocol == htons(ETH_P_IP))
++				dscp = ipv4_get_dsfield(ip_hdr(skb)) >> 2;
++			else if (skb->protocol == htons(ETH_P_IPV6))
++				dscp = ipv6_get_dsfield(ipv6_hdr(skb)) >> 2;
++			else	/* protocol doesn't have diffserv */
++				break;
+ 
++			newmark = (newmark & ~info->ctmark) |
++				  (info->ctmask | (dscp << info->shift_bits));
++		}
+ 		if (ct->mark != newmark) {
+ 			ct->mark = newmark;
+ 			nf_conntrack_event_cache(IPCT_MARK, ct);
+@@ -93,20 +106,36 @@ static unsigned int
+ connmark_tg(struct sk_buff *skb, const struct xt_action_param *par)
+ {
+ 	const struct xt_connmark_tginfo1 *info = par->targinfo;
+-	const struct xt_connmark_tginfo2 info2 = {
++	const struct xt_connmark_tginfo3 info3 = {
+ 		.ctmark	= info->ctmark,
+ 		.ctmask	= info->ctmask,
+ 		.nfmask	= info->nfmask,
+ 		.mode	= info->mode,
++		.func	= XT_CONNMARK_VALUE
+ 	};
+ 
+-	return connmark_tg_shift(skb, &info2);
++	return connmark_tg_shift(skb, &info3);
+ }
+ 
+ static unsigned int
+ connmark_tg_v2(struct sk_buff *skb, const struct xt_action_param *par)
+ {
+ 	const struct xt_connmark_tginfo2 *info = par->targinfo;
++	const struct xt_connmark_tginfo3 info3 = {
++		.ctmark	= info->ctmark,
++		.ctmask	= info->ctmask,
++		.nfmask	= info->nfmask,
++		.mode	= info->mode,
++		.func	= XT_CONNMARK_VALUE
++	};
++
++	return connmark_tg_shift(skb, &info3);
++}
++
++static unsigned int
++connmark_tg_v3(struct sk_buff *skb, const struct xt_action_param *par)
++{
++	const struct xt_connmark_tginfo3 *info = par->targinfo;
+ 
+ 	return connmark_tg_shift(skb, info);
+ }
+@@ -177,6 +206,16 @@ static struct xt_target connmark_tg_reg[
+ 		.targetsize     = sizeof(struct xt_connmark_tginfo2),
+ 		.destroy        = connmark_tg_destroy,
+ 		.me             = THIS_MODULE,
++	},
++	{
++		.name           = "CONNMARK",
++		.revision       = 3,
++		.family         = NFPROTO_UNSPEC,
++		.checkentry     = connmark_tg_check,
++		.target         = connmark_tg_v3,
++		.targetsize     = sizeof(struct xt_connmark_tginfo3),
++		.destroy        = connmark_tg_destroy,
++		.me             = THIS_MODULE,
+ 	}
+ };
+ 
diff --git a/target/linux/generic/hack-5.4/647-netfilter-flow-acct.patch b/target/linux/generic/hack-5.4/647-netfilter-flow-acct.patch
new file mode 100644
index 0000000000..fd8a871113
--- /dev/null
+++ b/target/linux/generic/hack-5.4/647-netfilter-flow-acct.patch
@@ -0,0 +1,70 @@
+--- a/include/net/netfilter/nf_flow_table.h
++++ b/include/net/netfilter/nf_flow_table.h
+@@ -163,6 +163,8 @@ struct nf_flow_table_hw {
+ int nf_flow_table_hw_register(const struct nf_flow_table_hw *offload);
+ void nf_flow_table_hw_unregister(const struct nf_flow_table_hw *offload);
+ 
++void nf_flow_table_acct(struct flow_offload *flow, struct sk_buff *skb, int dir);
++
+ extern struct work_struct nf_flow_offload_hw_work;
+ 
+ #define MODULE_ALIAS_NF_FLOWTABLE(family)	\
+--- a/net/netfilter/nf_flow_table_core.c
++++ b/net/netfilter/nf_flow_table_core.c
+@@ -11,6 +11,7 @@
+ #include <net/netfilter/nf_conntrack.h>
+ #include <net/netfilter/nf_conntrack_core.h>
+ #include <net/netfilter/nf_conntrack_tuple.h>
++#include <net/netfilter/nf_conntrack_acct.h>
+ 
+ struct flow_offload_entry {
+ 	struct flow_offload	flow;
+@@ -149,6 +150,22 @@ void flow_offload_free(struct flow_offlo
+ }
+ EXPORT_SYMBOL_GPL(flow_offload_free);
+ 
++void nf_flow_table_acct(struct flow_offload *flow, struct sk_buff *skb, int dir)
++{
++	struct flow_offload_entry *entry;
++	struct nf_conn_acct *acct;
++
++	entry = container_of(flow, struct flow_offload_entry, flow);
++	acct = nf_conn_acct_find(entry->ct);
++	if (acct) {
++		struct nf_conn_counter *counter = acct->counter;
++
++		atomic64_inc(&counter[dir].packets);
++		atomic64_add(skb->len, &counter[dir].bytes);
++	}
++}
++EXPORT_SYMBOL_GPL(nf_flow_table_acct);
++
+ static u32 flow_offload_hash(const void *data, u32 len, u32 seed)
+ {
+ 	const struct flow_offload_tuple *tuple = data;
+--- a/net/netfilter/nf_flow_table_ip.c
++++ b/net/netfilter/nf_flow_table_ip.c
+@@ -11,6 +11,7 @@
+ #include <net/ip6_route.h>
+ #include <net/neighbour.h>
+ #include <net/netfilter/nf_flow_table.h>
++
+ /* For layer 4 checksum field offset. */
+ #include <linux/tcp.h>
+ #include <linux/udp.h>
+@@ -267,6 +268,7 @@ nf_flow_offload_ip_hook(void *priv, stru
+ 	skb->dev = outdev;
+ 	nexthop = rt_nexthop(rt, flow->tuplehash[!dir].tuple.src_v4.s_addr);
+ 	skb_dst_set_noref(skb, &rt->dst);
++	nf_flow_table_acct(flow, skb, dir);
+ 	neigh_xmit(NEIGH_ARP_TABLE, outdev, &nexthop, skb);
+ 
+ 	return NF_STOLEN;
+@@ -487,6 +489,7 @@ nf_flow_offload_ipv6_hook(void *priv, st
+ 	skb->dev = outdev;
+ 	nexthop = rt6_nexthop(rt, &flow->tuplehash[!dir].tuple.src_v6);
+ 	skb_dst_set_noref(skb, &rt->dst);
++	nf_flow_table_acct(flow, skb, dir);
+ 	neigh_xmit(NEIGH_ND_TABLE, outdev, nexthop, skb);
+ 
+ 	return NF_STOLEN;
diff --git a/target/linux/generic/hack-5.4/650-netfilter-add-xt_OFFLOAD-target.patch b/target/linux/generic/hack-5.4/650-netfilter-add-xt_OFFLOAD-target.patch
new file mode 100644
index 0000000000..55247bc2a3
--- /dev/null
+++ b/target/linux/generic/hack-5.4/650-netfilter-add-xt_OFFLOAD-target.patch
@@ -0,0 +1,553 @@
+From: Felix Fietkau <nbd@nbd.name>
+Date: Tue, 20 Feb 2018 15:56:02 +0100
+Subject: [PATCH] netfilter: add xt_OFFLOAD target
+
+Signed-off-by: Felix Fietkau <nbd@nbd.name>
+---
+ create mode 100644 net/netfilter/xt_OFFLOAD.c
+
+--- a/net/ipv4/netfilter/Kconfig
++++ b/net/ipv4/netfilter/Kconfig
+@@ -63,8 +63,6 @@ config NF_TABLES_ARP
+ 	help
+ 	  This option enables the ARP support for nf_tables.
+ 
+-endif # NF_TABLES
+-
+ config NF_FLOW_TABLE_IPV4
+ 	tristate "Netfilter flow table IPv4 module"
+ 	depends on NF_FLOW_TABLE
+@@ -73,6 +71,8 @@ config NF_FLOW_TABLE_IPV4
+ 
+ 	  To compile it as a module, choose M here.
+ 
++endif # NF_TABLES
++
+ config NF_DUP_IPV4
+ 	tristate "Netfilter IPv4 packet duplication to alternate destination"
+ 	depends on !NF_CONNTRACK || NF_CONNTRACK
+--- a/net/ipv6/netfilter/Kconfig
++++ b/net/ipv6/netfilter/Kconfig
+@@ -80,7 +80,6 @@ config NFT_FIB_IPV6
+ 	  multicast or blackhole.
+ 
+ endif # NF_TABLES_IPV6
+-endif # NF_TABLES
+ 
+ config NF_FLOW_TABLE_IPV6
+ 	tristate "Netfilter flow table IPv6 module"
+@@ -90,6 +89,8 @@ config NF_FLOW_TABLE_IPV6
+ 
+ 	  To compile it as a module, choose M here.
+ 
++endif # NF_TABLES
++
+ config NF_DUP_IPV6
+ 	tristate "Netfilter IPv6 packet duplication to alternate destination"
+ 	depends on !NF_CONNTRACK || NF_CONNTRACK
+--- a/net/netfilter/Kconfig
++++ b/net/netfilter/Kconfig
+@@ -693,8 +693,6 @@ config NFT_FIB_NETDEV
+ 
+ endif # NF_TABLES_NETDEV
+ 
+-endif # NF_TABLES
+-
+ config NF_FLOW_TABLE_INET
+ 	tristate "Netfilter flow table mixed IPv4/IPv6 module"
+ 	depends on NF_FLOW_TABLE
+@@ -703,11 +701,12 @@ config NF_FLOW_TABLE_INET
+ 
+ 	  To compile it as a module, choose M here.
+ 
++endif # NF_TABLES
++
+ config NF_FLOW_TABLE
+ 	tristate "Netfilter flow table module"
+ 	depends on NETFILTER_INGRESS
+ 	depends on NF_CONNTRACK
+-	depends on NF_TABLES
+ 	help
+ 	  This option adds the flow table core infrastructure.
+ 
+@@ -996,6 +995,15 @@ config NETFILTER_XT_TARGET_NOTRACK
+ 	depends on NETFILTER_ADVANCED
+ 	select NETFILTER_XT_TARGET_CT
+ 
++config NETFILTER_XT_TARGET_FLOWOFFLOAD
++	tristate '"FLOWOFFLOAD" target support'
++	depends on NF_FLOW_TABLE
++	depends on NETFILTER_INGRESS
++	help
++	  This option adds a `FLOWOFFLOAD' target, which uses the nf_flow_offload
++	  module to speed up processing of packets by bypassing the usual
++	  netfilter chains
++
+ config NETFILTER_XT_TARGET_RATEEST
+ 	tristate '"RATEEST" target support'
+ 	depends on NETFILTER_ADVANCED
+--- a/net/netfilter/Makefile
++++ b/net/netfilter/Makefile
+@@ -144,6 +144,7 @@ obj-$(CONFIG_NETFILTER_XT_TARGET_CLASSIF
+ obj-$(CONFIG_NETFILTER_XT_TARGET_CONNSECMARK) += xt_CONNSECMARK.o
+ obj-$(CONFIG_NETFILTER_XT_TARGET_CT) += xt_CT.o
+ obj-$(CONFIG_NETFILTER_XT_TARGET_DSCP) += xt_DSCP.o
++obj-$(CONFIG_NETFILTER_XT_TARGET_FLOWOFFLOAD) += xt_FLOWOFFLOAD.o
+ obj-$(CONFIG_NETFILTER_XT_TARGET_HL) += xt_HL.o
+ obj-$(CONFIG_NETFILTER_XT_TARGET_HMARK) += xt_HMARK.o
+ obj-$(CONFIG_NETFILTER_XT_TARGET_LED) += xt_LED.o
+--- /dev/null
++++ b/net/netfilter/xt_FLOWOFFLOAD.c
+@@ -0,0 +1,422 @@
++/*
++ * Copyright (C) 2018 Felix Fietkau <nbd@nbd.name>
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License version 2 as
++ * published by the Free Software Foundation.
++ */
++#include <linux/module.h>
++#include <linux/init.h>
++#include <linux/netfilter.h>
++#include <linux/netfilter/xt_FLOWOFFLOAD.h>
++#include <net/ip.h>
++#include <net/netfilter/nf_conntrack.h>
++#include <net/netfilter/nf_conntrack_extend.h>
++#include <net/netfilter/nf_conntrack_helper.h>
++#include <net/netfilter/nf_flow_table.h>
++
++static struct nf_flowtable nf_flowtable;
++static HLIST_HEAD(hooks);
++static DEFINE_SPINLOCK(hooks_lock);
++static struct delayed_work hook_work;
++
++struct xt_flowoffload_hook {
++	struct hlist_node list;
++	struct nf_hook_ops ops;
++	struct net *net;
++	bool registered;
++	bool used;
++};
++
++static unsigned int
++xt_flowoffload_net_hook(void *priv, struct sk_buff *skb,
++			  const struct nf_hook_state *state)
++{
++	switch (skb->protocol) {
++	case htons(ETH_P_IP):
++		return nf_flow_offload_ip_hook(priv, skb, state);
++	case htons(ETH_P_IPV6):
++		return nf_flow_offload_ipv6_hook(priv, skb, state);
++	}
++
++	return NF_ACCEPT;
++}
++
++static int
++xt_flowoffload_create_hook(struct net_device *dev)
++{
++	struct xt_flowoffload_hook *hook;
++	struct nf_hook_ops *ops;
++
++	hook = kzalloc(sizeof(*hook), GFP_ATOMIC);
++	if (!hook)
++		return -ENOMEM;
++
++	ops = &hook->ops;
++	ops->pf = NFPROTO_NETDEV;
++	ops->hooknum = NF_NETDEV_INGRESS;
++	ops->priority = 10;
++	ops->priv = &nf_flowtable;
++	ops->hook = xt_flowoffload_net_hook;
++	ops->dev = dev;
++
++	hlist_add_head(&hook->list, &hooks);
++	mod_delayed_work(system_power_efficient_wq, &hook_work, 0);
++
++	return 0;
++}
++
++static struct xt_flowoffload_hook *
++flow_offload_lookup_hook(struct net_device *dev)
++{
++	struct xt_flowoffload_hook *hook;
++
++	hlist_for_each_entry(hook, &hooks, list) {
++		if (hook->ops.dev == dev)
++			return hook;
++	}
++
++	return NULL;
++}
++
++static void
++xt_flowoffload_check_device(struct net_device *dev)
++{
++	struct xt_flowoffload_hook *hook;
++
++	spin_lock_bh(&hooks_lock);
++	hook = flow_offload_lookup_hook(dev);
++	if (hook)
++		hook->used = true;
++	else
++		xt_flowoffload_create_hook(dev);
++	spin_unlock_bh(&hooks_lock);
++}
++
++static void
++xt_flowoffload_register_hooks(void)
++{
++	struct xt_flowoffload_hook *hook;
++
++restart:
++	hlist_for_each_entry(hook, &hooks, list) {
++		if (hook->registered)
++			continue;
++
++		hook->registered = true;
++		hook->net = dev_net(hook->ops.dev);
++		spin_unlock_bh(&hooks_lock);
++		nf_register_net_hook(hook->net, &hook->ops);
++		spin_lock_bh(&hooks_lock);
++		goto restart;
++	}
++
++}
++
++static void
++xt_flowoffload_cleanup_hooks(void)
++{
++	struct xt_flowoffload_hook *hook;
++
++restart:
++	hlist_for_each_entry(hook, &hooks, list) {
++		if (hook->used || !hook->registered)
++			continue;
++
++		hlist_del(&hook->list);
++		spin_unlock_bh(&hooks_lock);
++		nf_unregister_net_hook(hook->net, &hook->ops);
++		kfree(hook);
++		spin_lock_bh(&hooks_lock);
++		goto restart;
++	}
++
++}
++
++static void
++xt_flowoffload_check_hook(struct flow_offload *flow, void *data)
++{
++	struct flow_offload_tuple *tuple = &flow->tuplehash[0].tuple;
++	struct xt_flowoffload_hook *hook;
++	bool *found = data;
++
++	spin_lock_bh(&hooks_lock);
++	hlist_for_each_entry(hook, &hooks, list) {
++		if (hook->ops.dev->ifindex != tuple->iifidx &&
++		    hook->ops.dev->ifindex != tuple->oifidx)
++			continue;
++
++		hook->used = true;
++		*found = true;
++	}
++	spin_unlock_bh(&hooks_lock);
++}
++
++static void
++xt_flowoffload_hook_work(struct work_struct *work)
++{
++	struct xt_flowoffload_hook *hook;
++	bool found = false;
++	int err;
++
++	spin_lock_bh(&hooks_lock);
++	xt_flowoffload_register_hooks();
++	hlist_for_each_entry(hook, &hooks, list)
++		hook->used = false;
++	spin_unlock_bh(&hooks_lock);
++
++	err = nf_flow_table_iterate(&nf_flowtable, xt_flowoffload_check_hook,
++				    &found);
++	if (err && err != -EAGAIN)
++	    goto out;
++
++	spin_lock_bh(&hooks_lock);
++	xt_flowoffload_cleanup_hooks();
++	spin_unlock_bh(&hooks_lock);
++
++out:
++	if (found)
++		queue_delayed_work(system_power_efficient_wq, &hook_work, HZ);
++}
++
++static bool
++xt_flowoffload_skip(struct sk_buff *skb, int family)
++{
++	if (skb_sec_path(skb))
++		return true;
++
++	if (family == NFPROTO_IPV4) {
++		const struct ip_options *opt = &(IPCB(skb)->opt);
++
++		if (unlikely(opt->optlen))
++			return true;
++	}
++
++	return false;
++}
++
++static struct dst_entry *
++xt_flowoffload_dst(const struct nf_conn *ct, enum ip_conntrack_dir dir,
++		   const struct xt_action_param *par, int ifindex)
++{
++	struct dst_entry *dst = NULL;
++	struct flowi fl;
++
++	memset(&fl, 0, sizeof(fl));
++	switch (xt_family(par)) {
++	case NFPROTO_IPV4:
++		fl.u.ip4.daddr = ct->tuplehash[dir].tuple.src.u3.ip;
++		fl.u.ip4.flowi4_oif = ifindex;
++		break;
++	case NFPROTO_IPV6:
++		fl.u.ip6.saddr = ct->tuplehash[dir].tuple.dst.u3.in6;
++		fl.u.ip6.daddr = ct->tuplehash[dir].tuple.src.u3.in6;
++		fl.u.ip6.flowi6_oif = ifindex;
++		break;
++	}
++
++	nf_route(xt_net(par), &dst, &fl, false, xt_family(par));
++
++	return dst;
++}
++
++static int
++xt_flowoffload_route(struct sk_buff *skb, const struct nf_conn *ct,
++		   const struct xt_action_param *par,
++		   struct nf_flow_route *route, enum ip_conntrack_dir dir)
++{
++	struct dst_entry *this_dst, *other_dst;
++
++	this_dst = xt_flowoffload_dst(ct, !dir, par, xt_out(par)->ifindex);
++	other_dst = xt_flowoffload_dst(ct, dir, par, xt_in(par)->ifindex);
++
++	route->tuple[dir].dst		= this_dst;
++	route->tuple[!dir].dst		= other_dst;
++
++	if (!this_dst || !other_dst)
++		return -ENOENT;
++
++	if (dst_xfrm(this_dst) || dst_xfrm(other_dst))
++		return -EINVAL;
++
++	return 0;
++}
++
++static unsigned int
++flowoffload_tg(struct sk_buff *skb, const struct xt_action_param *par)
++{
++	const struct xt_flowoffload_target_info *info = par->targinfo;
++	struct tcphdr _tcph, *tcph = NULL;
++	enum ip_conntrack_info ctinfo;
++	enum ip_conntrack_dir dir;
++	struct nf_flow_route route;
++	struct flow_offload *flow = NULL;
++	struct nf_conn *ct;
++	struct net *net;
++
++	if (xt_flowoffload_skip(skb, xt_family(par)))
++		return XT_CONTINUE;
++
++	ct = nf_ct_get(skb, &ctinfo);
++	if (ct == NULL)
++		return XT_CONTINUE;
++
++	switch (ct->tuplehash[IP_CT_DIR_ORIGINAL].tuple.dst.protonum) {
++	case IPPROTO_TCP:
++		if (ct->proto.tcp.state != TCP_CONNTRACK_ESTABLISHED)
++			return XT_CONTINUE;
++
++		tcph = skb_header_pointer(skb, par->thoff,
++					  sizeof(_tcph), &_tcph);
++		if (unlikely(!tcph || tcph->fin || tcph->rst))
++			return XT_CONTINUE;
++		break;
++	case IPPROTO_UDP:
++		break;
++	default:
++		return XT_CONTINUE;
++	}
++
++	if (nf_ct_ext_exist(ct, NF_CT_EXT_HELPER) ||
++	    ct->status & IPS_SEQ_ADJUST)
++		return XT_CONTINUE;
++
++	if (!nf_ct_is_confirmed(ct))
++		return XT_CONTINUE;
++
++	if (!xt_in(par) || !xt_out(par))
++		return XT_CONTINUE;
++
++	if (test_and_set_bit(IPS_OFFLOAD_BIT, &ct->status))
++		return XT_CONTINUE;
++
++	dir = CTINFO2DIR(ctinfo);
++
++	if (xt_flowoffload_route(skb, ct, par, &route, dir) == 0)
++		flow = flow_offload_alloc(ct, &route);
++
++	dst_release(route.tuple[dir].dst);
++	dst_release(route.tuple[!dir].dst);
++
++	if (!flow)
++		goto err_flow_route;
++
++	if (tcph) {
++		ct->proto.tcp.seen[0].flags |= IP_CT_TCP_FLAG_BE_LIBERAL;
++		ct->proto.tcp.seen[1].flags |= IP_CT_TCP_FLAG_BE_LIBERAL;
++	}
++
++	if (flow_offload_add(&nf_flowtable, flow) < 0)
++		goto err_flow_add;
++
++	xt_flowoffload_check_device(xt_in(par));
++	xt_flowoffload_check_device(xt_out(par));
++
++	net = read_pnet(&nf_flowtable.ft_net);
++	if (!net)
++		write_pnet(&nf_flowtable.ft_net, xt_net(par));
++
++	if (info->flags & XT_FLOWOFFLOAD_HW)
++		nf_flow_offload_hw_add(xt_net(par), flow, ct);
++
++	return XT_CONTINUE;
++
++err_flow_add:
++	flow_offload_free(flow);
++err_flow_route:
++	clear_bit(IPS_OFFLOAD_BIT, &ct->status);
++	return XT_CONTINUE;
++}
++
++
++static int flowoffload_chk(const struct xt_tgchk_param *par)
++{
++	struct xt_flowoffload_target_info *info = par->targinfo;
++
++	if (info->flags & ~XT_FLOWOFFLOAD_MASK)
++		return -EINVAL;
++
++	return 0;
++}
++
++static struct xt_target offload_tg_reg __read_mostly = {
++	.family		= NFPROTO_UNSPEC,
++	.name		= "FLOWOFFLOAD",
++	.revision	= 0,
++	.targetsize	= sizeof(struct xt_flowoffload_target_info),
++	.usersize	= sizeof(struct xt_flowoffload_target_info),
++	.checkentry	= flowoffload_chk,
++	.target		= flowoffload_tg,
++	.me		= THIS_MODULE,
++};
++
++static int xt_flowoffload_table_init(struct nf_flowtable *table)
++{
++	table->flags = NF_FLOWTABLE_F_HW;
++	nf_flow_table_init(table);
++	return 0;
++}
++
++static void xt_flowoffload_table_cleanup(struct nf_flowtable *table)
++{
++	nf_flow_table_free(table);
++}
++
++static int flow_offload_netdev_event(struct notifier_block *this,
++				     unsigned long event, void *ptr)
++{
++	struct xt_flowoffload_hook *hook = NULL;
++	struct net_device *dev = netdev_notifier_info_to_dev(ptr);
++
++	if (event != NETDEV_UNREGISTER)
++		return NOTIFY_DONE;
++
++	spin_lock_bh(&hooks_lock);
++	hook = flow_offload_lookup_hook(dev);
++	if (hook) {
++		hlist_del(&hook->list);
++	}
++	spin_unlock_bh(&hooks_lock);
++	if (hook) {
++		nf_unregister_net_hook(hook->net, &hook->ops);
++		kfree(hook);
++	}
++
++	nf_flow_table_cleanup(dev_net(dev), dev);
++
++	return NOTIFY_DONE;
++}
++
++static struct notifier_block flow_offload_netdev_notifier = {
++	.notifier_call	= flow_offload_netdev_event,
++};
++
++static int __init xt_flowoffload_tg_init(void)
++{
++	int ret;
++
++	register_netdevice_notifier(&flow_offload_netdev_notifier);
++
++	INIT_DELAYED_WORK(&hook_work, xt_flowoffload_hook_work);
++
++	ret = xt_flowoffload_table_init(&nf_flowtable);
++	if (ret)
++		return ret;
++
++	ret = xt_register_target(&offload_tg_reg);
++	if (ret)
++		xt_flowoffload_table_cleanup(&nf_flowtable);
++
++	return ret;
++}
++
++static void __exit xt_flowoffload_tg_exit(void)
++{
++	xt_unregister_target(&offload_tg_reg);
++	xt_flowoffload_table_cleanup(&nf_flowtable);
++	unregister_netdevice_notifier(&flow_offload_netdev_notifier);
++}
++
++MODULE_LICENSE("GPL");
++module_init(xt_flowoffload_tg_init);
++module_exit(xt_flowoffload_tg_exit);
+--- a/net/netfilter/nf_flow_table_core.c
++++ b/net/netfilter/nf_flow_table_core.c
+@@ -6,7 +6,6 @@
+ #include <linux/netdevice.h>
+ #include <net/ip.h>
+ #include <net/ip6_route.h>
+-#include <net/netfilter/nf_tables.h>
+ #include <net/netfilter/nf_flow_table.h>
+ #include <net/netfilter/nf_conntrack.h>
+ #include <net/netfilter/nf_conntrack_core.h>
+--- /dev/null
++++ b/include/uapi/linux/netfilter/xt_FLOWOFFLOAD.h
+@@ -0,0 +1,17 @@
++/* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */
++#ifndef _XT_FLOWOFFLOAD_H
++#define _XT_FLOWOFFLOAD_H
++
++#include <linux/types.h>
++
++enum {
++	XT_FLOWOFFLOAD_HW	= 1 << 0,
++
++	XT_FLOWOFFLOAD_MASK	= XT_FLOWOFFLOAD_HW
++};
++
++struct xt_flowoffload_target_info {
++	__u32 flags;
++};
++
++#endif /* _XT_FLOWOFFLOAD_H */
diff --git a/target/linux/generic/hack-5.4/651-wireless_mesh_header.patch b/target/linux/generic/hack-5.4/651-wireless_mesh_header.patch
new file mode 100644
index 0000000000..965b431d01
--- /dev/null
+++ b/target/linux/generic/hack-5.4/651-wireless_mesh_header.patch
@@ -0,0 +1,24 @@
+From 6d3bc769657b0ee7c7506dad9911111c4226a7ea Mon Sep 17 00:00:00 2001
+From: Imre Kaloz <kaloz@openwrt.org>
+Date: Fri, 7 Jul 2017 17:21:05 +0200
+Subject: mac80211: increase wireless mesh header size
+
+lede-commit 3d4466cfd8f75f717efdb1f96fdde3c70d865fc1
+Signed-off-by: Imre Kaloz <kaloz@openwrt.org>
+---
+ include/linux/netdevice.h | 4 ++--
+ 1 file changed, 2 insertions(+), 2 deletions(-)
+
+--- a/include/linux/netdevice.h
++++ b/include/linux/netdevice.h
+@@ -140,8 +140,8 @@ static inline bool dev_xmit_complete(int
+ 
+ #if defined(CONFIG_HYPERV_NET)
+ # define LL_MAX_HEADER 128
+-#elif defined(CONFIG_WLAN) || IS_ENABLED(CONFIG_AX25)
+-# if defined(CONFIG_MAC80211_MESH)
++#elif defined(CONFIG_WLAN) || IS_ENABLED(CONFIG_AX25) || 1
++# if defined(CONFIG_MAC80211_MESH) || 1
+ #  define LL_MAX_HEADER 128
+ # else
+ #  define LL_MAX_HEADER 96
diff --git a/target/linux/generic/hack-5.4/660-fq_codel_defaults.patch b/target/linux/generic/hack-5.4/660-fq_codel_defaults.patch
new file mode 100644
index 0000000000..42698c6451
--- /dev/null
+++ b/target/linux/generic/hack-5.4/660-fq_codel_defaults.patch
@@ -0,0 +1,27 @@
+From a6ccb238939b25851474a279b20367fd24a0e816 Mon Sep 17 00:00:00 2001
+From: Felix Fietkau <nbd@nbd.name>
+Date: Fri, 7 Jul 2017 17:21:53 +0200
+Subject:  hack: net: fq_codel: tune defaults for small devices
+
+Assume that x86_64 devices always have a big memory and do not need this 
+optimization compared to devices with only 32 MB or 64 MB RAM.
+
+Signed-off-by: Felix Fietkau <nbd@nbd.name>
+---
+ net/sched/sch_fq_codel.c | 2 +-
+ 1 file changed, 1 insertion(+), 1 deletion(-)
+
+--- a/net/sched/sch_fq_codel.c
++++ b/net/sched/sch_fq_codel.c
+@@ -474,7 +474,11 @@ static int fq_codel_init(struct Qdisc *s
+ 
+ 	sch->limit = 10*1024;
+ 	q->flows_cnt = 1024;
++#ifdef CONFIG_X86_64
+ 	q->memory_limit = 32 << 20; /* 32 MBytes */
++#else
++	q->memory_limit = 4 << 20; /* 4 MBytes */
++#endif
+ 	q->drop_batch_size = 64;
+ 	q->quantum = psched_mtu(qdisc_dev(sch));
+ 	INIT_LIST_HEAD(&q->new_flows);
diff --git a/target/linux/generic/hack-5.4/661-use_fq_codel_by_default.patch b/target/linux/generic/hack-5.4/661-use_fq_codel_by_default.patch
new file mode 100644
index 0000000000..2778377de7
--- /dev/null
+++ b/target/linux/generic/hack-5.4/661-use_fq_codel_by_default.patch
@@ -0,0 +1,94 @@
+From 1d418f7e88035ed7a94073f6354246c66e9193e9 Mon Sep 17 00:00:00 2001
+From: Felix Fietkau <nbd@nbd.name>
+Date: Fri, 7 Jul 2017 17:22:58 +0200
+Subject: fq_codel: switch default qdisc from pfifo_fast to fq_codel and remove pfifo_fast
+
+Signed-off-by: Felix Fietkau <nbd@nbd.name>
+---
+ include/net/sch_generic.h | 3 ++-
+ net/sched/Kconfig         | 3 ++-
+ net/sched/sch_api.c       | 2 +-
+ net/sched/sch_fq_codel.c  | 3 ++-
+ net/sched/sch_generic.c   | 4 ++--
+ 5 files changed, 9 insertions(+), 6 deletions(-)
+
+--- a/include/net/sch_generic.h
++++ b/include/net/sch_generic.h
+@@ -487,12 +487,13 @@ extern struct Qdisc_ops noop_qdisc_ops;
+ extern struct Qdisc_ops pfifo_fast_ops;
+ extern struct Qdisc_ops mq_qdisc_ops;
+ extern struct Qdisc_ops noqueue_qdisc_ops;
++extern struct Qdisc_ops fq_codel_qdisc_ops;
+ extern const struct Qdisc_ops *default_qdisc_ops;
+ static inline const struct Qdisc_ops *
+ get_default_qdisc_ops(const struct net_device *dev, int ntx)
+ {
+ 	return ntx < dev->real_num_tx_queues ?
+-			default_qdisc_ops : &pfifo_fast_ops;
++			default_qdisc_ops : &fq_codel_qdisc_ops;
+ }
+ 
+ struct Qdisc_class_common {
+--- a/net/sched/Kconfig
++++ b/net/sched/Kconfig
+@@ -3,8 +3,9 @@
+ #
+ 
+ menuconfig NET_SCHED
+-	bool "QoS and/or fair queueing"
++	def_bool y
+ 	select NET_SCH_FIFO
++	select NET_SCH_FQ_CODEL
+ 	---help---
+ 	  When the kernel has several packets to send out over a network
+ 	  device, it has to decide which ones to send first, which ones to
+--- a/net/sched/sch_api.c
++++ b/net/sched/sch_api.c
+@@ -2162,7 +2162,7 @@ static int __init pktsched_init(void)
+ 		return err;
+ 	}
+ 
+-	register_qdisc(&pfifo_fast_ops);
++	register_qdisc(&fq_codel_qdisc_ops);
+ 	register_qdisc(&pfifo_qdisc_ops);
+ 	register_qdisc(&bfifo_qdisc_ops);
+ 	register_qdisc(&pfifo_head_drop_qdisc_ops);
+--- a/net/sched/sch_fq_codel.c
++++ b/net/sched/sch_fq_codel.c
+@@ -714,7 +714,7 @@ static const struct Qdisc_class_ops fq_c
+ 	.walk		=	fq_codel_walk,
+ };
+ 
+-static struct Qdisc_ops fq_codel_qdisc_ops __read_mostly = {
++struct Qdisc_ops fq_codel_qdisc_ops __read_mostly = {
+ 	.cl_ops		=	&fq_codel_class_ops,
+ 	.id		=	"fq_codel",
+ 	.priv_size	=	sizeof(struct fq_codel_sched_data),
+@@ -729,6 +729,7 @@ static struct Qdisc_ops fq_codel_qdisc_o
+ 	.dump_stats =	fq_codel_dump_stats,
+ 	.owner		=	THIS_MODULE,
+ };
++EXPORT_SYMBOL(fq_codel_qdisc_ops);
+ 
+ static int __init fq_codel_module_init(void)
+ {
+--- a/net/sched/sch_generic.c
++++ b/net/sched/sch_generic.c
+@@ -35,7 +35,7 @@
+ #include <net/xfrm.h>
+ 
+ /* Qdisc to use by default */
+-const struct Qdisc_ops *default_qdisc_ops = &pfifo_fast_ops;
++const struct Qdisc_ops *default_qdisc_ops = &fq_codel_qdisc_ops;
+ EXPORT_SYMBOL(default_qdisc_ops);
+ 
+ /* Main transmission queue. */
+@@ -1025,7 +1025,7 @@ static void attach_one_default_qdisc(str
+ 				     void *_unused)
+ {
+ 	struct Qdisc *qdisc;
+-	const struct Qdisc_ops *ops = default_qdisc_ops;
++	const struct Qdisc_ops *ops = &fq_codel_qdisc_ops;
+ 
+ 	if (dev->priv_flags & IFF_NO_QUEUE)
+ 		ops = &noqueue_qdisc_ops;
diff --git a/target/linux/generic/hack-5.4/662-remove_pfifo_fast.patch b/target/linux/generic/hack-5.4/662-remove_pfifo_fast.patch
new file mode 100644
index 0000000000..e49507a590
--- /dev/null
+++ b/target/linux/generic/hack-5.4/662-remove_pfifo_fast.patch
@@ -0,0 +1,220 @@
+From b531d492d5ef1cf9dba0f4888eb5fd8624a6d762 Mon Sep 17 00:00:00 2001
+From: Felix Fietkau <nbd@nbd.name>
+Date: Fri, 7 Jul 2017 17:23:42 +0200
+Subject: net: sched: switch default qdisc from pfifo_fast to fq_codel and remove pfifo_fast
+
+Signed-off-by: Felix Fietkau <nbd@nbd.name>
+---
+ net/sched/sch_generic.c | 140 ------------------------------------------------
+ 1 file changed, 140 deletions(-)
+
+--- a/net/sched/sch_generic.c
++++ b/net/sched/sch_generic.c
+@@ -612,207 +612,6 @@ struct Qdisc_ops noqueue_qdisc_ops __rea
+ 	.owner		=	THIS_MODULE,
+ };
+ 
+-static const u8 prio2band[TC_PRIO_MAX + 1] = {
+-	1, 2, 2, 2, 1, 2, 0, 0 , 1, 1, 1, 1, 1, 1, 1, 1
+-};
+-
+-/* 3-band FIFO queue: old style, but should be a bit faster than
+-   generic prio+fifo combination.
+- */
+-
+-#define PFIFO_FAST_BANDS 3
+-
+-/*
+- * Private data for a pfifo_fast scheduler containing:
+- *	- rings for priority bands
+- */
+-struct pfifo_fast_priv {
+-	struct skb_array q[PFIFO_FAST_BANDS];
+-};
+-
+-static inline struct skb_array *band2list(struct pfifo_fast_priv *priv,
+-					  int band)
+-{
+-	return &priv->q[band];
+-}
+-
+-static int pfifo_fast_enqueue(struct sk_buff *skb, struct Qdisc *qdisc,
+-			      struct sk_buff **to_free)
+-{
+-	int band = prio2band[skb->priority & TC_PRIO_MAX];
+-	struct pfifo_fast_priv *priv = qdisc_priv(qdisc);
+-	struct skb_array *q = band2list(priv, band);
+-	unsigned int pkt_len = qdisc_pkt_len(skb);
+-	int err;
+-
+-	err = skb_array_produce(q, skb);
+-
+-	if (unlikely(err))
+-		return qdisc_drop_cpu(skb, qdisc, to_free);
+-
+-	qdisc_qstats_atomic_qlen_inc(qdisc);
+-	/* Note: skb can not be used after skb_array_produce(),
+-	 * so we better not use qdisc_qstats_cpu_backlog_inc()
+-	 */
+-	this_cpu_add(qdisc->cpu_qstats->backlog, pkt_len);
+-	return NET_XMIT_SUCCESS;
+-}
+-
+-static struct sk_buff *pfifo_fast_dequeue(struct Qdisc *qdisc)
+-{
+-	struct pfifo_fast_priv *priv = qdisc_priv(qdisc);
+-	struct sk_buff *skb = NULL;
+-	int band;
+-
+-	for (band = 0; band < PFIFO_FAST_BANDS && !skb; band++) {
+-		struct skb_array *q = band2list(priv, band);
+-
+-		if (__skb_array_empty(q))
+-			continue;
+-
+-		skb = __skb_array_consume(q);
+-	}
+-	if (likely(skb)) {
+-		qdisc_qstats_cpu_backlog_dec(qdisc, skb);
+-		qdisc_bstats_cpu_update(qdisc, skb);
+-		qdisc_qstats_atomic_qlen_dec(qdisc);
+-	}
+-
+-	return skb;
+-}
+-
+-static struct sk_buff *pfifo_fast_peek(struct Qdisc *qdisc)
+-{
+-	struct pfifo_fast_priv *priv = qdisc_priv(qdisc);
+-	struct sk_buff *skb = NULL;
+-	int band;
+-
+-	for (band = 0; band < PFIFO_FAST_BANDS && !skb; band++) {
+-		struct skb_array *q = band2list(priv, band);
+-
+-		skb = __skb_array_peek(q);
+-	}
+-
+-	return skb;
+-}
+-
+-static void pfifo_fast_reset(struct Qdisc *qdisc)
+-{
+-	int i, band;
+-	struct pfifo_fast_priv *priv = qdisc_priv(qdisc);
+-
+-	for (band = 0; band < PFIFO_FAST_BANDS; band++) {
+-		struct skb_array *q = band2list(priv, band);
+-		struct sk_buff *skb;
+-
+-		/* NULL ring is possible if destroy path is due to a failed
+-		 * skb_array_init() in pfifo_fast_init() case.
+-		 */
+-		if (!q->ring.queue)
+-			continue;
+-
+-		while ((skb = __skb_array_consume(q)) != NULL)
+-			kfree_skb(skb);
+-	}
+-
+-	for_each_possible_cpu(i) {
+-		struct gnet_stats_queue *q = per_cpu_ptr(qdisc->cpu_qstats, i);
+-
+-		q->backlog = 0;
+-	}
+-}
+-
+-static int pfifo_fast_dump(struct Qdisc *qdisc, struct sk_buff *skb)
+-{
+-	struct tc_prio_qopt opt = { .bands = PFIFO_FAST_BANDS };
+-
+-	memcpy(&opt.priomap, prio2band, TC_PRIO_MAX + 1);
+-	if (nla_put(skb, TCA_OPTIONS, sizeof(opt), &opt))
+-		goto nla_put_failure;
+-	return skb->len;
+-
+-nla_put_failure:
+-	return -1;
+-}
+-
+-static int pfifo_fast_init(struct Qdisc *qdisc, struct nlattr *opt,
+-			   struct netlink_ext_ack *extack)
+-{
+-	unsigned int qlen = qdisc_dev(qdisc)->tx_queue_len;
+-	struct pfifo_fast_priv *priv = qdisc_priv(qdisc);
+-	int prio;
+-
+-	/* guard against zero length rings */
+-	if (!qlen)
+-		return -EINVAL;
+-
+-	for (prio = 0; prio < PFIFO_FAST_BANDS; prio++) {
+-		struct skb_array *q = band2list(priv, prio);
+-		int err;
+-
+-		err = skb_array_init(q, qlen, GFP_KERNEL);
+-		if (err)
+-			return -ENOMEM;
+-	}
+-
+-	/* Can by-pass the queue discipline */
+-	qdisc->flags |= TCQ_F_CAN_BYPASS;
+-	return 0;
+-}
+-
+-static void pfifo_fast_destroy(struct Qdisc *sch)
+-{
+-	struct pfifo_fast_priv *priv = qdisc_priv(sch);
+-	int prio;
+-
+-	for (prio = 0; prio < PFIFO_FAST_BANDS; prio++) {
+-		struct skb_array *q = band2list(priv, prio);
+-
+-		/* NULL ring is possible if destroy path is due to a failed
+-		 * skb_array_init() in pfifo_fast_init() case.
+-		 */
+-		if (!q->ring.queue)
+-			continue;
+-		/* Destroy ring but no need to kfree_skb because a call to
+-		 * pfifo_fast_reset() has already done that work.
+-		 */
+-		ptr_ring_cleanup(&q->ring, NULL);
+-	}
+-}
+-
+-static int pfifo_fast_change_tx_queue_len(struct Qdisc *sch,
+-					  unsigned int new_len)
+-{
+-	struct pfifo_fast_priv *priv = qdisc_priv(sch);
+-	struct skb_array *bands[PFIFO_FAST_BANDS];
+-	int prio;
+-
+-	for (prio = 0; prio < PFIFO_FAST_BANDS; prio++) {
+-		struct skb_array *q = band2list(priv, prio);
+-
+-		bands[prio] = q;
+-	}
+-
+-	return skb_array_resize_multiple(bands, PFIFO_FAST_BANDS, new_len,
+-					 GFP_KERNEL);
+-}
+-
+-struct Qdisc_ops pfifo_fast_ops __read_mostly = {
+-	.id		=	"pfifo_fast",
+-	.priv_size	=	sizeof(struct pfifo_fast_priv),
+-	.enqueue	=	pfifo_fast_enqueue,
+-	.dequeue	=	pfifo_fast_dequeue,
+-	.peek		=	pfifo_fast_peek,
+-	.init		=	pfifo_fast_init,
+-	.destroy	=	pfifo_fast_destroy,
+-	.reset		=	pfifo_fast_reset,
+-	.dump		=	pfifo_fast_dump,
+-	.change_tx_queue_len =  pfifo_fast_change_tx_queue_len,
+-	.owner		=	THIS_MODULE,
+-	.static_flags	=	TCQ_F_NOLOCK | TCQ_F_CPUSTATS,
+-};
+-EXPORT_SYMBOL(pfifo_fast_ops);
+-
+ static struct lock_class_key qdisc_tx_busylock;
+ static struct lock_class_key qdisc_running_key;
+ 
diff --git a/target/linux/generic/hack-5.4/700-swconfig_switch_drivers.patch b/target/linux/generic/hack-5.4/700-swconfig_switch_drivers.patch
new file mode 100644
index 0000000000..ebfcfe81c7
--- /dev/null
+++ b/target/linux/generic/hack-5.4/700-swconfig_switch_drivers.patch
@@ -0,0 +1,140 @@
+From 36e516290611e613aa92996cb4339561452695b4 Mon Sep 17 00:00:00 2001
+From: Felix Fietkau <nbd@nbd.name>
+Date: Fri, 7 Jul 2017 17:24:23 +0200
+Subject: net: swconfig: adds openwrt switch layer
+
+Signed-off-by: Felix Fietkau <nbd@nbd.name>
+---
+ drivers/net/phy/Kconfig   | 83 +++++++++++++++++++++++++++++++++++++++++++++++
+ drivers/net/phy/Makefile  | 15 +++++++++
+ include/uapi/linux/Kbuild |  1 +
+ 3 files changed, 99 insertions(+)
+
+--- a/drivers/net/phy/Kconfig
++++ b/drivers/net/phy/Kconfig
+@@ -209,6 +209,89 @@ config LED_TRIGGER_PHY
+ 		for any speed known to the PHY.
+ 
+ 
++comment "Switch configuration API + drivers"
++
++config SWCONFIG
++	tristate "Switch configuration API"
++	---help---
++	  Switch configuration API using netlink. This allows
++	  you to configure the VLAN features of certain switches.
++
++config SWCONFIG_LEDS
++	bool "Switch LED trigger support"
++	depends on (SWCONFIG && LEDS_TRIGGERS)
++
++config ADM6996_PHY
++	tristate "Driver for ADM6996 switches"
++	select SWCONFIG
++	---help---
++	  Currently supports the ADM6996FC and ADM6996M switches.
++	  Support for FC is very limited.
++
++config AR8216_PHY
++	tristate "Driver for Atheros AR8216 switches"
++	select ETHERNET_PACKET_MANGLE
++	select SWCONFIG
++
++config AR8216_PHY_LEDS
++	bool "Atheros AR8216 switch LED support"
++	depends on (AR8216_PHY && LEDS_CLASS)
++
++source "drivers/net/phy/b53/Kconfig"
++
++config IP17XX_PHY
++	tristate "Driver for IC+ IP17xx switches"
++	select SWCONFIG
++
++config MVSWITCH_PHY
++	tristate "Driver for Marvell 88E6060 switches"
++	select ETHERNET_PACKET_MANGLE
++
++config MVSW61XX_PHY
++	tristate "Driver for Marvell 88E6171/6172 switches"
++	select SWCONFIG
++
++config PSB6970_PHY
++	tristate "Lantiq XWAY Tantos (PSB6970) Ethernet switch"
++	select SWCONFIG
++	select ETHERNET_PACKET_MANGLE
++
++config RTL8306_PHY
++	tristate "Driver for Realtek RTL8306S switches"
++	select SWCONFIG
++
++config RTL8366_SMI
++	tristate "Driver for the RTL8366 SMI interface"
++	depends on GPIOLIB
++	---help---
++	  This module implements the SMI interface protocol which is used
++	  by some RTL8366 ethernet switch devices via the generic GPIO API.
++
++if RTL8366_SMI
++
++config RTL8366_SMI_DEBUG_FS
++	bool "RTL8366 SMI interface debugfs support"
++        depends on DEBUG_FS
++        default n
++
++config RTL8366S_PHY
++	tristate "Driver for the Realtek RTL8366S switch"
++	select SWCONFIG
++
++config RTL8366RB_PHY
++	tristate "Driver for the Realtek RTL8366RB switch"
++	select SWCONFIG
++
++config RTL8367_PHY
++	tristate "Driver for the Realtek RTL8367R/M switches"
++	select SWCONFIG
++
++config RTL8367B_PHY
++	tristate "Driver fot the Realtek RTL8367R-VB switch"
++	select SWCONFIG
++
++endif # RTL8366_SMI
++
+ comment "MII PHY device drivers"
+ 
+ config SFP
+--- a/drivers/net/phy/Makefile
++++ b/drivers/net/phy/Makefile
+@@ -22,6 +22,21 @@ libphy-$(CONFIG_LED_TRIGGER_PHY)	+= phy_
+ obj-$(CONFIG_PHYLINK)		+= phylink.o
+ obj-$(CONFIG_PHYLIB)		+= libphy.o
+ 
++obj-$(CONFIG_SWCONFIG)		+= swconfig.o
++obj-$(CONFIG_ADM6996_PHY)	+= adm6996.o
++obj-$(CONFIG_AR8216_PHY)	+= ar8216.o ar8327.o
++obj-$(CONFIG_SWCONFIG_B53)	+= b53/
++obj-$(CONFIG_IP17XX_PHY)	+= ip17xx.o
++obj-$(CONFIG_MVSWITCH_PHY)	+= mvswitch.o
++obj-$(CONFIG_MVSW61XX_PHY)	+= mvsw61xx.o
++obj-$(CONFIG_PSB6970_PHY)	+= psb6970.o
++obj-$(CONFIG_RTL8306_PHY)	+= rtl8306.o
++obj-$(CONFIG_RTL8366_SMI)	+= rtl8366_smi.o
++obj-$(CONFIG_RTL8366S_PHY)	+= rtl8366s.o
++obj-$(CONFIG_RTL8366RB_PHY)	+= rtl8366rb.o
++obj-$(CONFIG_RTL8367_PHY)	+= rtl8367.o
++obj-$(CONFIG_RTL8367B_PHY)	+= rtl8367b.o
++
+ obj-$(CONFIG_MDIO_BCM_IPROC)	+= mdio-bcm-iproc.o
+ obj-$(CONFIG_MDIO_BCM_UNIMAC)	+= mdio-bcm-unimac.o
+ obj-$(CONFIG_MDIO_BITBANG)	+= mdio-bitbang.o
+--- a/include/linux/platform_data/b53.h
++++ b/include/linux/platform_data/b53.h
+@@ -29,6 +29,9 @@ struct b53_platform_data {
+ 	u32 chip_id;
+ 	u16 enabled_ports;
+ 
++	/* allow to specify an ethX alias */
++	const char *alias;
++
+ 	/* only used by MMAP'd driver */
+ 	unsigned big_endian:1;
+ 	void __iomem *regs;
diff --git a/target/linux/generic/hack-5.4/702-phy_add_aneg_done_function.patch b/target/linux/generic/hack-5.4/702-phy_add_aneg_done_function.patch
new file mode 100644
index 0000000000..a0e6484be8
--- /dev/null
+++ b/target/linux/generic/hack-5.4/702-phy_add_aneg_done_function.patch
@@ -0,0 +1,27 @@
+--- a/include/linux/phy.h
++++ b/include/linux/phy.h
+@@ -555,6 +555,12 @@ struct phy_driver {
+ 	/* Determines the negotiated speed and duplex */
+ 	int (*read_status)(struct phy_device *phydev);
+ 
++	/* 
++	 * Update the value in phydev->link to reflect the 
++	 * current link value
++	 */
++	int (*update_link)(struct phy_device *phydev);
++
+ 	/* Clears any pending interrupts */
+ 	int (*ack_interrupt)(struct phy_device *phydev);
+ 
+--- a/drivers/net/phy/phy_device.c
++++ b/drivers/net/phy/phy_device.c
+@@ -1577,6 +1577,9 @@ int genphy_update_link(struct phy_device
+ {
+ 	int status;
+ 
++	if (phydev->drv && phydev->drv->update_link)
++		return phydev->drv->update_link(phydev);
++
+ 	/* The link state is latched low so that momentary link
+ 	 * drops can be detected. Do not double-read the status
+ 	 * in polling mode to detect such short link drops.
diff --git a/target/linux/generic/hack-5.4/721-phy_packets.patch b/target/linux/generic/hack-5.4/721-phy_packets.patch
new file mode 100644
index 0000000000..1ad7d46764
--- /dev/null
+++ b/target/linux/generic/hack-5.4/721-phy_packets.patch
@@ -0,0 +1,176 @@
+From ffe387740bbe88dd88bbe04d6375902708003d6e Mon Sep 17 00:00:00 2001
+From: Felix Fietkau <nbd@nbd.name>
+Date: Fri, 7 Jul 2017 17:25:00 +0200
+Subject: net: add packet mangeling patch
+
+Signed-off-by: Felix Fietkau <nbd@nbd.name>
+---
+ include/linux/netdevice.h | 11 +++++++++++
+ include/linux/skbuff.h    | 14 ++++----------
+ net/Kconfig               |  6 ++++++
+ net/core/dev.c            | 18 ++++++++++++++----
+ net/core/skbuff.c         | 17 +++++++++++++++++
+ net/ethernet/eth.c        |  6 ++++++
+ 6 files changed, 58 insertions(+), 14 deletions(-)
+
+--- a/include/linux/netdevice.h
++++ b/include/linux/netdevice.h
+@@ -1514,6 +1514,7 @@ enum netdev_priv_flags {
+ 	IFF_FAILOVER_SLAVE		= 1<<28,
+ 	IFF_L3MDEV_RX_HANDLER		= 1<<29,
+ 	IFF_LIVE_RENAME_OK		= 1<<30,
++	IFF_NO_IP_ALIGN			= 1<<31,
+ };
+ 
+ #define IFF_802_1Q_VLAN			IFF_802_1Q_VLAN
+@@ -1546,6 +1547,7 @@ enum netdev_priv_flags {
+ #define IFF_FAILOVER_SLAVE		IFF_FAILOVER_SLAVE
+ #define IFF_L3MDEV_RX_HANDLER		IFF_L3MDEV_RX_HANDLER
+ #define IFF_LIVE_RENAME_OK		IFF_LIVE_RENAME_OK
++#define IFF_NO_IP_ALIGN			IFF_NO_IP_ALIGN
+ 
+ /**
+  *	struct net_device - The DEVICE structure.
+@@ -1846,6 +1848,11 @@ struct net_device {
+ 	const struct tlsdev_ops *tlsdev_ops;
+ #endif
+ 
++#ifdef CONFIG_ETHERNET_PACKET_MANGLE
++	void (*eth_mangle_rx)(struct net_device *dev, struct sk_buff *skb);
++	struct sk_buff *(*eth_mangle_tx)(struct net_device *dev, struct sk_buff *skb);
++#endif
++
+ 	const struct header_ops *header_ops;
+ 
+ 	unsigned int		flags;
+@@ -1928,6 +1935,10 @@ struct net_device {
+ 	struct mpls_dev __rcu	*mpls_ptr;
+ #endif
+ 
++#ifdef CONFIG_ETHERNET_PACKET_MANGLE
++	void			*phy_ptr; /* PHY device specific data */
++#endif
++
+ /*
+  * Cache lines mostly used on receive path (including eth_type_trans())
+  */
+--- a/include/linux/skbuff.h
++++ b/include/linux/skbuff.h
+@@ -2547,6 +2547,10 @@ static inline int pskb_trim(struct sk_bu
+ 	return (len < skb->len) ? __pskb_trim(skb, len) : 0;
+ }
+ 
++extern struct sk_buff *__netdev_alloc_skb_ip_align(struct net_device *dev,
++		unsigned int length, gfp_t gfp);
++
++
+ /**
+  *	pskb_trim_unique - remove end from a paged unique (not cloned) buffer
+  *	@skb: buffer to alter
+@@ -2678,16 +2682,6 @@ static inline struct sk_buff *dev_alloc_
+ }
+ 
+ 
+-static inline struct sk_buff *__netdev_alloc_skb_ip_align(struct net_device *dev,
+-		unsigned int length, gfp_t gfp)
+-{
+-	struct sk_buff *skb = __netdev_alloc_skb(dev, length + NET_IP_ALIGN, gfp);
+-
+-	if (NET_IP_ALIGN && skb)
+-		skb_reserve(skb, NET_IP_ALIGN);
+-	return skb;
+-}
+-
+ static inline struct sk_buff *netdev_alloc_skb_ip_align(struct net_device *dev,
+ 		unsigned int length)
+ {
+--- a/net/Kconfig
++++ b/net/Kconfig
+@@ -25,6 +25,12 @@ menuconfig NET
+ 
+ if NET
+ 
++config ETHERNET_PACKET_MANGLE
++	bool
++	help
++	  This option can be selected by phy drivers that need to mangle
++	  packets going in or out of an ethernet device.
++
+ config WANT_COMPAT_NETLINK_MESSAGES
+ 	bool
+ 	help
+--- a/net/core/dev.c
++++ b/net/core/dev.c
+@@ -3253,10 +3253,20 @@ static int xmit_one(struct sk_buff *skb,
+ 	if (!list_empty(&ptype_all) || !list_empty(&dev->ptype_all))
+ 		dev_queue_xmit_nit(skb, dev);
+ 
+-	len = skb->len;
+-	trace_net_dev_start_xmit(skb, dev);
+-	rc = netdev_start_xmit(skb, dev, txq, more);
+-	trace_net_dev_xmit(skb, rc, dev, len);
++#ifdef CONFIG_ETHERNET_PACKET_MANGLE
++	if (!dev->eth_mangle_tx ||
++	    (skb = dev->eth_mangle_tx(dev, skb)) != NULL)
++#else
++	if (1)
++#endif
++	{
++		len = skb->len;
++		trace_net_dev_start_xmit(skb, dev);
++		rc = netdev_start_xmit(skb, dev, txq, more);
++		trace_net_dev_xmit(skb, rc, dev, len);
++	} else {
++		rc = NETDEV_TX_OK;
++	}
+ 
+ 	return rc;
+ }
+--- a/net/core/skbuff.c
++++ b/net/core/skbuff.c
+@@ -63,6 +63,7 @@
+ #include <linux/errqueue.h>
+ #include <linux/prefetch.h>
+ #include <linux/if_vlan.h>
++#include <linux/if.h>
+ 
+ #include <net/protocol.h>
+ #include <net/dst.h>
+@@ -503,6 +504,22 @@ skb_fail:
+ }
+ EXPORT_SYMBOL(__napi_alloc_skb);
+ 
++struct sk_buff *__netdev_alloc_skb_ip_align(struct net_device *dev,
++		unsigned int length, gfp_t gfp)
++{
++	struct sk_buff *skb = __netdev_alloc_skb(dev, length + NET_IP_ALIGN, gfp);
++
++#ifdef CONFIG_ETHERNET_PACKET_MANGLE
++	if (dev && (dev->priv_flags & IFF_NO_IP_ALIGN))
++		return skb;
++#endif
++
++	if (NET_IP_ALIGN && skb)
++		skb_reserve(skb, NET_IP_ALIGN);
++	return skb;
++}
++EXPORT_SYMBOL(__netdev_alloc_skb_ip_align);
++
+ void skb_add_rx_frag(struct sk_buff *skb, int i, struct page *page, int off,
+ 		     int size, unsigned int truesize)
+ {
+--- a/net/ethernet/eth.c
++++ b/net/ethernet/eth.c
+@@ -172,6 +172,12 @@ __be16 eth_type_trans(struct sk_buff *sk
+ 	const struct ethhdr *eth;
+ 
+ 	skb->dev = dev;
++
++#ifdef CONFIG_ETHERNET_PACKET_MANGLE
++	if (dev->eth_mangle_rx)
++		dev->eth_mangle_rx(dev, skb);
++#endif
++
+ 	skb_reset_mac_header(skb);
+ 
+ 	eth = (struct ethhdr *)skb->data;
diff --git a/target/linux/generic/hack-5.4/773-bgmac-add-srab-switch.patch b/target/linux/generic/hack-5.4/773-bgmac-add-srab-switch.patch
new file mode 100644
index 0000000000..3b4781657e
--- /dev/null
+++ b/target/linux/generic/hack-5.4/773-bgmac-add-srab-switch.patch
@@ -0,0 +1,98 @@
+From 3cb240533ab787899dc7f17aa7d6c5b4810e2e58 Mon Sep 17 00:00:00 2001
+From: Hauke Mehrtens <hauke@hauke-m.de>
+Date: Fri, 7 Jul 2017 17:26:01 +0200
+Subject: bcm53xx: bgmac: use srab switch driver
+
+use the srab switch driver on these SoCs.
+
+Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
+---
+ drivers/net/ethernet/broadcom/bgmac-bcma.c |  1 +
+ drivers/net/ethernet/broadcom/bgmac.c      | 24 ++++++++++++++++++++++++
+ drivers/net/ethernet/broadcom/bgmac.h      |  4 ++++
+ 3 files changed, 29 insertions(+)
+
+--- a/drivers/net/ethernet/broadcom/bgmac-bcma.c
++++ b/drivers/net/ethernet/broadcom/bgmac-bcma.c
+@@ -268,6 +268,7 @@ static int bgmac_probe(struct bcma_devic
+ 		bgmac->feature_flags |= BGMAC_FEAT_CLKCTLST;
+ 		bgmac->feature_flags |= BGMAC_FEAT_NO_RESET;
+ 		bgmac->feature_flags |= BGMAC_FEAT_FORCE_SPEED_2500;
++		bgmac->feature_flags |= BGMAC_FEAT_SRAB;
+ 		break;
+ 	default:
+ 		bgmac->feature_flags |= BGMAC_FEAT_CLKCTLST;
+--- a/drivers/net/ethernet/broadcom/bgmac.c
++++ b/drivers/net/ethernet/broadcom/bgmac.c
+@@ -12,6 +12,7 @@
+ #include <linux/bcma/bcma.h>
+ #include <linux/etherdevice.h>
+ #include <linux/interrupt.h>
++#include <linux/platform_data/b53.h>
+ #include <linux/bcm47xx_nvram.h>
+ #include <linux/phy.h>
+ #include <linux/phy_fixed.h>
+@@ -1409,6 +1410,17 @@ static const struct ethtool_ops bgmac_et
+ 	.set_link_ksettings     = phy_ethtool_set_link_ksettings,
+ };
+ 
++static struct b53_platform_data bgmac_b53_pdata = {
++};
++
++static struct platform_device bgmac_b53_dev = {
++	.name		= "b53-srab-switch",
++	.id		= -1,
++	.dev		= {
++		.platform_data = &bgmac_b53_pdata,
++	},
++};
++
+ /**************************************************
+  * MII
+  **************************************************/
+@@ -1540,6 +1552,14 @@ int bgmac_enet_probe(struct bgmac *bgmac
+ 	net_dev->hw_features = net_dev->features;
+ 	net_dev->vlan_features = net_dev->features;
+ 
++	if ((bgmac->feature_flags & BGMAC_FEAT_SRAB) && !bgmac_b53_pdata.regs) {
++		bgmac_b53_pdata.regs = ioremap_nocache(0x18007000, 0x1000);
++
++		err = platform_device_register(&bgmac_b53_dev);
++		if (!err)
++			bgmac->b53_device = &bgmac_b53_dev;
++	}
++
+ 	err = register_netdev(bgmac->net_dev);
+ 	if (err) {
+ 		dev_err(bgmac->dev, "Cannot register net device\n");
+@@ -1562,6 +1582,10 @@ EXPORT_SYMBOL_GPL(bgmac_enet_probe);
+ 
+ void bgmac_enet_remove(struct bgmac *bgmac)
+ {
++	if (bgmac->b53_device)
++		platform_device_unregister(&bgmac_b53_dev);
++	bgmac->b53_device = NULL;
++
+ 	unregister_netdev(bgmac->net_dev);
+ 	phy_disconnect(bgmac->net_dev->phydev);
+ 	netif_napi_del(&bgmac->napi);
+--- a/drivers/net/ethernet/broadcom/bgmac.h
++++ b/drivers/net/ethernet/broadcom/bgmac.h
+@@ -427,6 +427,7 @@
+ #define BGMAC_FEAT_CC4_IF_SW_TYPE_RGMII	BIT(18)
+ #define BGMAC_FEAT_CC7_IF_TYPE_RGMII	BIT(19)
+ #define BGMAC_FEAT_IDM_MASK		BIT(20)
++#define BGMAC_FEAT_SRAB			BIT(21)
+ 
+ struct bgmac_slot_info {
+ 	union {
+@@ -532,6 +533,9 @@ struct bgmac {
+ 	void (*cmn_maskset32)(struct bgmac *bgmac, u16 offset, u32 mask,
+ 			      u32 set);
+ 	int (*phy_connect)(struct bgmac *bgmac);
++
++	/* platform device for associated switch */
++	struct platform_device *b53_device;
+ };
+ 
+ struct bgmac *bgmac_alloc(struct device *dev);
diff --git a/target/linux/generic/hack-5.4/901-debloat_sock_diag.patch b/target/linux/generic/hack-5.4/901-debloat_sock_diag.patch
new file mode 100644
index 0000000000..639f76d309
--- /dev/null
+++ b/target/linux/generic/hack-5.4/901-debloat_sock_diag.patch
@@ -0,0 +1,136 @@
+From 3b6115d6b57a263bdc8c9b1df273bd4a7955eead Mon Sep 17 00:00:00 2001
+From: Felix Fietkau <nbd@nbd.name>
+Date: Sat, 8 Jul 2017 08:16:31 +0200
+Subject: debloat: add some debloat patches, strip down procfs and make O_DIRECT support optional, saves ~15K after lzma on MIPS
+
+Signed-off-by: Felix Fietkau <nbd@nbd.name>
+---
+ net/Kconfig         | 3 +++
+ net/core/Makefile   | 3 ++-
+ net/core/sock.c     | 2 ++
+ net/ipv4/Kconfig    | 1 +
+ net/netlink/Kconfig | 1 +
+ net/packet/Kconfig  | 1 +
+ net/unix/Kconfig    | 1 +
+ 7 files changed, 11 insertions(+), 1 deletion(-)
+
+--- a/net/Kconfig
++++ b/net/Kconfig
+@@ -98,6 +98,9 @@ source "net/netlabel/Kconfig"
+ 
+ endif # if INET
+ 
++config SOCK_DIAG
++	bool
++
+ config NETWORK_SECMARK
+ 	bool "Security Marking"
+ 	help
+--- a/net/core/Makefile
++++ b/net/core/Makefile
+@@ -10,9 +10,10 @@ obj-$(CONFIG_SYSCTL) += sysctl_net_core.
+ 
+ obj-y		     += dev.o ethtool.o dev_addr_lists.o dst.o netevent.o \
+ 			neighbour.o rtnetlink.o utils.o link_watch.o filter.o \
+-			sock_diag.o dev_ioctl.o tso.o sock_reuseport.o \
++ 			dev_ioctl.o tso.o sock_reuseport.o \
+ 			fib_notifier.o xdp.o
+ 
++obj-$(CONFIG_SOCK_DIAG) += sock_diag.o
+ obj-y += net-sysfs.o
+ obj-$(CONFIG_PAGE_POOL) += page_pool.o
+ obj-$(CONFIG_PROC_FS) += net-procfs.o
+--- a/net/core/sock.c
++++ b/net/core/sock.c
+@@ -490,6 +490,18 @@ discard_and_relse:
+ }
+ EXPORT_SYMBOL(__sk_receive_skb);
+ 
++u64 sock_gen_cookie(struct sock *sk)
++{
++	while (1) {
++		u64 res = atomic64_read(&sk->sk_cookie);
++
++		if (res)
++			return res;
++		res = atomic64_inc_return(&sock_net(sk)->cookie_gen);
++		atomic64_cmpxchg(&sk->sk_cookie, 0, res);
++	}
++}
++
+ struct dst_entry *__sk_dst_check(struct sock *sk, u32 cookie)
+ {
+ 	struct dst_entry *dst = __sk_dst_get(sk);
+@@ -1603,9 +1615,11 @@ static void __sk_free(struct sock *sk)
+ 	if (likely(sk->sk_net_refcnt))
+ 		sock_inuse_add(sock_net(sk), -1);
+ 
++#ifdef CONFIG_SOCK_DIAG
+ 	if (unlikely(sk->sk_net_refcnt && sock_diag_has_destroy_listeners(sk)))
+ 		sock_diag_broadcast_destroy(sk);
+ 	else
++#endif
+ 		sk_destruct(sk);
+ }
+ 
+--- a/net/core/sock_diag.c
++++ b/net/core/sock_diag.c
+@@ -20,18 +20,6 @@ static int (*inet_rcv_compat)(struct sk_
+ static DEFINE_MUTEX(sock_diag_table_mutex);
+ static struct workqueue_struct *broadcast_wq;
+ 
+-u64 sock_gen_cookie(struct sock *sk)
+-{
+-	while (1) {
+-		u64 res = atomic64_read(&sk->sk_cookie);
+-
+-		if (res)
+-			return res;
+-		res = atomic64_inc_return(&sock_net(sk)->cookie_gen);
+-		atomic64_cmpxchg(&sk->sk_cookie, 0, res);
+-	}
+-}
+-
+ int sock_diag_check_cookie(struct sock *sk, const __u32 *cookie)
+ {
+ 	u64 res;
+--- a/net/ipv4/Kconfig
++++ b/net/ipv4/Kconfig
+@@ -425,6 +425,7 @@ config INET_XFRM_MODE_BEET
+ 
+ config INET_DIAG
+ 	tristate "INET: socket monitoring interface"
++	select SOCK_DIAG
+ 	default y
+ 	---help---
+ 	  Support for INET (TCP, DCCP, etc) socket monitoring interface used by
+--- a/net/netlink/Kconfig
++++ b/net/netlink/Kconfig
+@@ -4,6 +4,7 @@
+ 
+ config NETLINK_DIAG
+ 	tristate "NETLINK: socket monitoring interface"
++	select SOCK_DIAG
+ 	default n
+ 	---help---
+ 	  Support for NETLINK socket monitoring interface used by the ss tool.
+--- a/net/packet/Kconfig
++++ b/net/packet/Kconfig
+@@ -18,6 +18,7 @@ config PACKET
+ config PACKET_DIAG
+ 	tristate "Packet: sockets monitoring interface"
+ 	depends on PACKET
++	select SOCK_DIAG
+ 	default n
+ 	---help---
+ 	  Support for PF_PACKET sockets monitoring interface used by the ss tool.
+--- a/net/unix/Kconfig
++++ b/net/unix/Kconfig
+@@ -22,6 +22,7 @@ config UNIX
+ config UNIX_DIAG
+ 	tristate "UNIX: socket monitoring interface"
+ 	depends on UNIX
++	select SOCK_DIAG
+ 	default n
+ 	---help---
+ 	  Support for UNIX socket monitoring interface used by the ss tool.
diff --git a/target/linux/generic/hack-5.4/902-debloat_proc.patch b/target/linux/generic/hack-5.4/902-debloat_proc.patch
new file mode 100644
index 0000000000..1442cee8bb
--- /dev/null
+++ b/target/linux/generic/hack-5.4/902-debloat_proc.patch
@@ -0,0 +1,405 @@
+From 9e3f1d0805b2d919904dd9a4ff0d956314cc3cba Mon Sep 17 00:00:00 2001
+From: Felix Fietkau <nbd@nbd.name>
+Date: Sat, 8 Jul 2017 08:20:09 +0200
+Subject: debloat: procfs
+
+Signed-off-by: Felix Fietkau <nbd@nbd.name>
+---
+ fs/locks.c               |  2 ++
+ fs/proc/Kconfig          |  5 +++++
+ fs/proc/consoles.c       |  3 +++
+ fs/proc/proc_tty.c       | 11 ++++++++++-
+ include/net/snmp.h       | 18 +++++++++++++++++-
+ ipc/msg.c                |  3 +++
+ ipc/sem.c                |  2 ++
+ ipc/shm.c                |  2 ++
+ ipc/util.c               |  3 +++
+ kernel/exec_domain.c     |  2 ++
+ kernel/irq/proc.c        |  9 +++++++++
+ kernel/time/timer_list.c |  2 ++
+ mm/vmalloc.c             |  2 ++
+ mm/vmstat.c              |  8 +++++---
+ net/8021q/vlanproc.c     |  6 ++++++
+ net/core/net-procfs.c    | 18 ++++++++++++------
+ net/core/sock.c          |  2 ++
+ net/ipv4/fib_trie.c      | 18 ++++++++++++------
+ net/ipv4/proc.c          |  3 +++
+ net/ipv4/route.c         |  3 +++
+ 20 files changed, 105 insertions(+), 17 deletions(-)
+
+--- a/fs/locks.c
++++ b/fs/locks.c
+@@ -2786,6 +2786,8 @@ static const struct seq_operations locks
+ 
+ static int __init proc_locks_init(void)
+ {
++	if (IS_ENABLED(CONFIG_PROC_STRIPPED))
++		return 0;
+ 	proc_create_seq_private("locks", 0, NULL, &locks_seq_operations,
+ 			sizeof(struct locks_iterator), NULL);
+ 	return 0;
+--- a/fs/proc/Kconfig
++++ b/fs/proc/Kconfig
+@@ -97,3 +97,8 @@ config PROC_CHILDREN
+ 
+ 	  Say Y if you are running any user-space software which takes benefit from
+ 	  this interface. For example, rkt is such a piece of software.
++
++config PROC_STRIPPED
++	default n
++	depends on EXPERT
++	bool "Strip non-essential /proc functionality to reduce code size"
+--- a/fs/proc/consoles.c
++++ b/fs/proc/consoles.c
+@@ -93,6 +93,9 @@ static const struct seq_operations conso
+ 
+ static int __init proc_consoles_init(void)
+ {
++	if (IS_ENABLED(CONFIG_PROC_STRIPPED))
++		return 0;
++
+ 	proc_create_seq("consoles", 0, NULL, &consoles_op);
+ 	return 0;
+ }
+--- a/fs/proc/proc_tty.c
++++ b/fs/proc/proc_tty.c
+@@ -133,7 +133,10 @@ static const struct seq_operations tty_d
+ void proc_tty_register_driver(struct tty_driver *driver)
+ {
+ 	struct proc_dir_entry *ent;
+-		
++
++	if (IS_ENABLED(CONFIG_PROC_STRIPPED))
++		return;
++
+ 	if (!driver->driver_name || driver->proc_entry ||
+ 	    !driver->ops->proc_show)
+ 		return;
+@@ -150,6 +153,9 @@ void proc_tty_unregister_driver(struct t
+ {
+ 	struct proc_dir_entry *ent;
+ 
++	if (IS_ENABLED(CONFIG_PROC_STRIPPED))
++		return;
++
+ 	ent = driver->proc_entry;
+ 	if (!ent)
+ 		return;
+@@ -164,6 +170,9 @@ void proc_tty_unregister_driver(struct t
+  */
+ void __init proc_tty_init(void)
+ {
++	if (IS_ENABLED(CONFIG_PROC_STRIPPED))
++		return;
++
+ 	if (!proc_mkdir("tty", NULL))
+ 		return;
+ 	proc_mkdir("tty/ldisc", NULL);	/* Preserved: it's userspace visible */
+--- a/include/net/snmp.h
++++ b/include/net/snmp.h
+@@ -123,6 +123,21 @@ struct linux_xfrm_mib {
+ #define DECLARE_SNMP_STAT(type, name)	\
+ 	extern __typeof__(type) __percpu *name
+ 
++#ifdef CONFIG_PROC_STRIPPED
++#define __SNMP_STATS_DUMMY(mib)	\
++	do { (void) mib->mibs[0]; } while(0)
++
++#define __SNMP_INC_STATS(mib, field) __SNMP_STATS_DUMMY(mib)
++#define SNMP_INC_STATS_ATOMIC_LONG(mib, field) __SNMP_STATS_DUMMY(mib)
++#define SNMP_INC_STATS(mib, field) __SNMP_STATS_DUMMY(mib)
++#define SNMP_DEC_STATS(mib, field) __SNMP_STATS_DUMMY(mib)
++#define __SNMP_ADD_STATS(mib, field, addend) __SNMP_STATS_DUMMY(mib)
++#define SNMP_ADD_STATS(mib, field, addend) __SNMP_STATS_DUMMY(mib)
++#define SNMP_UPD_PO_STATS(mib, basefield, addend) __SNMP_STATS_DUMMY(mib)
++#define __SNMP_UPD_PO_STATS(mib, basefield, addend) __SNMP_STATS_DUMMY(mib)
++
++#else
++
+ #define __SNMP_INC_STATS(mib, field)	\
+ 			__this_cpu_inc(mib->mibs[field])
+ 
+@@ -153,8 +168,9 @@ struct linux_xfrm_mib {
+ 		__this_cpu_add(ptr[basefield##OCTETS], addend);	\
+ 	} while (0)
+ 
++#endif
+ 
+-#if BITS_PER_LONG==32
++#if (BITS_PER_LONG==32) && !defined(CONFIG_PROC_STRIPPED)
+ 
+ #define __SNMP_ADD_STATS64(mib, field, addend) 				\
+ 	do {								\
+--- a/ipc/msg.c
++++ b/ipc/msg.c
+@@ -1292,6 +1292,9 @@ void __init msg_init(void)
+ {
+ 	msg_init_ns(&init_ipc_ns);
+ 
++	if (IS_ENABLED(CONFIG_PROC_STRIPPED))
++		return;
++
+ 	ipc_init_proc_interface("sysvipc/msg",
+ 				"       key      msqid perms      cbytes       qnum lspid lrpid   uid   gid  cuid  cgid      stime      rtime      ctime\n",
+ 				IPC_MSG_IDS, sysvipc_msg_proc_show);
+--- a/ipc/sem.c
++++ b/ipc/sem.c
+@@ -243,6 +243,8 @@ void sem_exit_ns(struct ipc_namespace *n
+ void __init sem_init(void)
+ {
+ 	sem_init_ns(&init_ipc_ns);
++	if (IS_ENABLED(CONFIG_PROC_STRIPPED))
++		return;
+ 	ipc_init_proc_interface("sysvipc/sem",
+ 				"       key      semid perms      nsems   uid   gid  cuid  cgid      otime      ctime\n",
+ 				IPC_SEM_IDS, sysvipc_sem_proc_show);
+--- a/ipc/shm.c
++++ b/ipc/shm.c
+@@ -144,6 +144,8 @@ pure_initcall(ipc_ns_init);
+ 
+ void __init shm_init(void)
+ {
++	if (IS_ENABLED(CONFIG_PROC_STRIPPED))
++		return;
+ 	ipc_init_proc_interface("sysvipc/shm",
+ #if BITS_PER_LONG <= 32
+ 				"       key      shmid perms       size  cpid  lpid nattch   uid   gid  cuid  cgid      atime      dtime      ctime        rss       swap\n",
+--- a/ipc/util.c
++++ b/ipc/util.c
+@@ -140,6 +140,9 @@ void __init ipc_init_proc_interface(cons
+ 	struct proc_dir_entry *pde;
+ 	struct ipc_proc_iface *iface;
+ 
++	if (IS_ENABLED(CONFIG_PROC_STRIPPED))
++		return;
++
+ 	iface = kmalloc(sizeof(*iface), GFP_KERNEL);
+ 	if (!iface)
+ 		return;
+--- a/kernel/exec_domain.c
++++ b/kernel/exec_domain.c
+@@ -29,6 +29,8 @@ static int execdomains_proc_show(struct
+ 
+ static int __init proc_execdomains_init(void)
+ {
++	if (IS_ENABLED(CONFIG_PROC_STRIPPED))
++		return 0;
+ 	proc_create_single("execdomains", 0, NULL, execdomains_proc_show);
+ 	return 0;
+ }
+--- a/kernel/irq/proc.c
++++ b/kernel/irq/proc.c
+@@ -333,6 +333,9 @@ void register_irq_proc(unsigned int irq,
+ 	void __maybe_unused *irqp = (void *)(unsigned long) irq;
+ 	char name [MAX_NAMELEN];
+ 
++	if (IS_ENABLED(CONFIG_PROC_STRIPPED) && !IS_ENABLED(CONFIG_SMP))
++		return;
++
+ 	if (!root_irq_dir || (desc->irq_data.chip == &no_irq_chip))
+ 		return;
+ 
+@@ -386,6 +389,9 @@ void unregister_irq_proc(unsigned int ir
+ {
+ 	char name [MAX_NAMELEN];
+ 
++	if (IS_ENABLED(CONFIG_PROC_STRIPPED) && !IS_ENABLED(CONFIG_SMP))
++		return;
++
+ 	if (!root_irq_dir || !desc->dir)
+ 		return;
+ #ifdef CONFIG_SMP
+@@ -424,6 +430,9 @@ void init_irq_proc(void)
+ 	unsigned int irq;
+ 	struct irq_desc *desc;
+ 
++	if (IS_ENABLED(CONFIG_PROC_STRIPPED) && !IS_ENABLED(CONFIG_SMP))
++		return;
++
+ 	/* create /proc/irq */
+ 	root_irq_dir = proc_mkdir("irq", NULL);
+ 	if (!root_irq_dir)
+--- a/kernel/time/timer_list.c
++++ b/kernel/time/timer_list.c
+@@ -375,6 +375,8 @@ static int __init init_timer_list_procfs
+ {
+ 	struct proc_dir_entry *pe;
+ 
++	if (IS_ENABLED(CONFIG_PROC_STRIPPED))
++		return 0;
+ 	pe = proc_create_seq_private("timer_list", 0400, NULL, &timer_list_sops,
+ 			sizeof(struct timer_list_iter), NULL);
+ 	if (!pe)
+--- a/mm/vmalloc.c
++++ b/mm/vmalloc.c
+@@ -2749,6 +2749,8 @@ static const struct seq_operations vmall
+ 
+ static int __init proc_vmalloc_init(void)
+ {
++	if (IS_ENABLED(CONFIG_PROC_STRIPPED))
++		return 0;
+ 	if (IS_ENABLED(CONFIG_NUMA))
+ 		proc_create_seq_private("vmallocinfo", 0400, NULL,
+ 				&vmalloc_op,
+--- a/mm/vmstat.c
++++ b/mm/vmstat.c
+@@ -1972,10 +1972,12 @@ void __init init_mm_internals(void)
+ 	start_shepherd_timer();
+ #endif
+ #ifdef CONFIG_PROC_FS
+-	proc_create_seq("buddyinfo", 0444, NULL, &fragmentation_op);
+-	proc_create_seq("pagetypeinfo", 0400, NULL, &pagetypeinfo_op);
++	if (!IS_ENABLED(CONFIG_PROC_STRIPPED)) {
++		proc_create_seq("buddyinfo", 0444, NULL, &fragmentation_op);
++		proc_create_seq("pagetypeinfo", 0400, NULL, &pagetypeinfo_op);
++		proc_create_seq("zoneinfo", 0444, NULL, &zoneinfo_op);
++	}
+ 	proc_create_seq("vmstat", 0444, NULL, &vmstat_op);
+-	proc_create_seq("zoneinfo", 0444, NULL, &zoneinfo_op);
+ #endif
+ }
+ 
+--- a/net/8021q/vlanproc.c
++++ b/net/8021q/vlanproc.c
+@@ -96,6 +96,9 @@ void vlan_proc_cleanup(struct net *net)
+ {
+ 	struct vlan_net *vn = net_generic(net, vlan_net_id);
+ 
++	if (IS_ENABLED(CONFIG_PROC_STRIPPED))
++		return;
++
+ 	if (vn->proc_vlan_conf)
+ 		remove_proc_entry(name_conf, vn->proc_vlan_dir);
+ 
+@@ -115,6 +118,9 @@ int __net_init vlan_proc_init(struct net
+ {
+ 	struct vlan_net *vn = net_generic(net, vlan_net_id);
+ 
++	if (IS_ENABLED(CONFIG_PROC_STRIPPED))
++		return 0;
++
+ 	vn->proc_vlan_dir = proc_net_mkdir(net, name_root, net->proc_net);
+ 	if (!vn->proc_vlan_dir)
+ 		goto err;
+--- a/net/core/net-procfs.c
++++ b/net/core/net-procfs.c
+@@ -279,10 +279,12 @@ static int __net_init dev_proc_net_init(
+ 	if (!proc_create_net("dev", 0444, net->proc_net, &dev_seq_ops,
+ 			sizeof(struct seq_net_private)))
+ 		goto out;
+-	if (!proc_create_seq("softnet_stat", 0444, net->proc_net,
++	if (!IS_ENABLED(CONFIG_PROC_STRIPPED) &&
++			!proc_create_seq("softnet_stat", 0444, net->proc_net,
+ 			 &softnet_seq_ops))
+ 		goto out_dev;
+-	if (!proc_create_net("ptype", 0444, net->proc_net, &ptype_seq_ops,
++	if (!IS_ENABLED(CONFIG_PROC_STRIPPED) &&
++			!proc_create_net("ptype", 0444, net->proc_net, &ptype_seq_ops,
+ 			sizeof(struct seq_net_private)))
+ 		goto out_softnet;
+ 
+@@ -292,9 +294,11 @@ static int __net_init dev_proc_net_init(
+ out:
+ 	return rc;
+ out_ptype:
+-	remove_proc_entry("ptype", net->proc_net);
++	if (!IS_ENABLED(CONFIG_PROC_STRIPPED))
++		remove_proc_entry("ptype", net->proc_net);
+ out_softnet:
+-	remove_proc_entry("softnet_stat", net->proc_net);
++	if (!IS_ENABLED(CONFIG_PROC_STRIPPED))
++		remove_proc_entry("softnet_stat", net->proc_net);
+ out_dev:
+ 	remove_proc_entry("dev", net->proc_net);
+ 	goto out;
+@@ -304,8 +308,10 @@ static void __net_exit dev_proc_net_exit
+ {
+ 	wext_proc_exit(net);
+ 
+-	remove_proc_entry("ptype", net->proc_net);
+-	remove_proc_entry("softnet_stat", net->proc_net);
++	if (!IS_ENABLED(CONFIG_PROC_STRIPPED)) {
++		remove_proc_entry("ptype", net->proc_net);
++		remove_proc_entry("softnet_stat", net->proc_net);
++	}
+ 	remove_proc_entry("dev", net->proc_net);
+ }
+ 
+--- a/net/core/sock.c
++++ b/net/core/sock.c
+@@ -3486,6 +3486,8 @@ static __net_initdata struct pernet_oper
+ 
+ static int __init proto_init(void)
+ {
++	if (IS_ENABLED(CONFIG_PROC_STRIPPED))
++		return 0;
+ 	return register_pernet_subsys(&proto_net_ops);
+ }
+ 
+--- a/net/ipv4/fib_trie.c
++++ b/net/ipv4/fib_trie.c
+@@ -2717,11 +2717,13 @@ static const struct seq_operations fib_r
+ 
+ int __net_init fib_proc_init(struct net *net)
+ {
+-	if (!proc_create_net("fib_trie", 0444, net->proc_net, &fib_trie_seq_ops,
++	if (!IS_ENABLED(CONFIG_PROC_STRIPPED) &&
++			!proc_create_net("fib_trie", 0444, net->proc_net, &fib_trie_seq_ops,
+ 			sizeof(struct fib_trie_iter)))
+ 		goto out1;
+ 
+-	if (!proc_create_net_single("fib_triestat", 0444, net->proc_net,
++	if (!IS_ENABLED(CONFIG_PROC_STRIPPED) &&
++			!proc_create_net_single("fib_triestat", 0444, net->proc_net,
+ 			fib_triestat_seq_show, NULL))
+ 		goto out2;
+ 
+@@ -2732,17 +2734,21 @@ int __net_init fib_proc_init(struct net
+ 	return 0;
+ 
+ out3:
+-	remove_proc_entry("fib_triestat", net->proc_net);
++	if (!IS_ENABLED(CONFIG_PROC_STRIPPED))
++		remove_proc_entry("fib_triestat", net->proc_net);
+ out2:
+-	remove_proc_entry("fib_trie", net->proc_net);
++	if (!IS_ENABLED(CONFIG_PROC_STRIPPED))
++		remove_proc_entry("fib_trie", net->proc_net);
+ out1:
+ 	return -ENOMEM;
+ }
+ 
+ void __net_exit fib_proc_exit(struct net *net)
+ {
+-	remove_proc_entry("fib_trie", net->proc_net);
+-	remove_proc_entry("fib_triestat", net->proc_net);
++	if (!IS_ENABLED(CONFIG_PROC_STRIPPED)) {
++		remove_proc_entry("fib_trie", net->proc_net);
++		remove_proc_entry("fib_triestat", net->proc_net);
++	}
+ 	remove_proc_entry("route", net->proc_net);
+ }
+ 
+--- a/net/ipv4/proc.c
++++ b/net/ipv4/proc.c
+@@ -524,5 +524,8 @@ static __net_initdata struct pernet_oper
+ 
+ int __init ip_misc_proc_init(void)
+ {
++	if (IS_ENABLED(CONFIG_PROC_STRIPPED))
++		return 0;
++
+ 	return register_pernet_subsys(&ip_proc_ops);
+ }
+--- a/net/ipv4/route.c
++++ b/net/ipv4/route.c
+@@ -411,6 +411,9 @@ static struct pernet_operations ip_rt_pr
+ 
+ static int __init ip_rt_proc_init(void)
+ {
++	if (IS_ENABLED(CONFIG_PROC_STRIPPED))
++		return 0;
++
+ 	return register_pernet_subsys(&ip_rt_proc_ops);
+ }
+ 
diff --git a/target/linux/generic/hack-5.4/904-debloat_dma_buf.patch b/target/linux/generic/hack-5.4/904-debloat_dma_buf.patch
new file mode 100644
index 0000000000..3cbafc701e
--- /dev/null
+++ b/target/linux/generic/hack-5.4/904-debloat_dma_buf.patch
@@ -0,0 +1,64 @@
+From e3692cb2fcd5ba1244512a0f43b8118f65f1c375 Mon Sep 17 00:00:00 2001
+From: Felix Fietkau <nbd@nbd.name>
+Date: Sat, 8 Jul 2017 08:20:43 +0200
+Subject: debloat: dmabuf
+
+Signed-off-by: Felix Fietkau <nbd@nbd.name>
+---
+ drivers/base/Kconfig      |  2 +-
+ drivers/dma-buf/Makefile  | 10 +++++++---
+ drivers/dma-buf/dma-buf.c |  4 +++-
+ kernel/sched/core.c       |  1 +
+ 4 files changed, 12 insertions(+), 5 deletions(-)
+
+--- a/drivers/base/Kconfig
++++ b/drivers/base/Kconfig
+@@ -172,7 +172,7 @@ config SOC_BUS
+ source "drivers/base/regmap/Kconfig"
+ 
+ config DMA_SHARED_BUFFER
+-	bool
++	tristate
+ 	default n
+ 	select ANON_INODES
+ 	select IRQ_WORK
+--- a/drivers/dma-buf/Makefile
++++ b/drivers/dma-buf/Makefile
+@@ -1,3 +1,7 @@
+-obj-y := dma-buf.o dma-fence.o dma-fence-array.o reservation.o seqno-fence.o
+-obj-$(CONFIG_SYNC_FILE)		+= sync_file.o
+-obj-$(CONFIG_SW_SYNC)		+= sw_sync.o sync_debug.o
++obj-$(CONFIG_DMA_SHARED_BUFFER) := dma-shared-buffer.o
++
++dma-buf-objs-y := dma-buf.o dma-fence.o dma-fence-array.o reservation.o seqno-fence.o
++dma-buf-objs-$(CONFIG_SYNC_FILE)		+= sync_file.o
++dma-buf-objs-$(CONFIG_SW_SYNC)		+= sw_sync.o sync_debug.o
++
++dma-shared-buffer-objs :=  $(dma-buf-objs-y)
+--- a/drivers/dma-buf/dma-buf.c
++++ b/drivers/dma-buf/dma-buf.c
+@@ -34,6 +34,7 @@
+ #include <linux/poll.h>
+ #include <linux/reservation.h>
+ #include <linux/mm.h>
++#include <linux/module.h>
+ 
+ #include <uapi/linux/dma-buf.h>
+ 
+@@ -1159,4 +1160,5 @@ static void __exit dma_buf_deinit(void)
+ {
+ 	dma_buf_uninit_debugfs();
+ }
+-__exitcall(dma_buf_deinit);
++module_exit(dma_buf_deinit);
++MODULE_LICENSE("GPL");
+--- a/kernel/sched/core.c
++++ b/kernel/sched/core.c
+@@ -2129,6 +2129,7 @@ int wake_up_state(struct task_struct *p,
+ {
+ 	return try_to_wake_up(p, state, 0);
+ }
++EXPORT_SYMBOL_GPL(wake_up_state);
+ 
+ /*
+  * Perform scheduler related setup for a newly forked process p.
diff --git a/target/linux/generic/hack-5.4/910-kobject_uevent.patch b/target/linux/generic/hack-5.4/910-kobject_uevent.patch
new file mode 100644
index 0000000000..c4c41ca400
--- /dev/null
+++ b/target/linux/generic/hack-5.4/910-kobject_uevent.patch
@@ -0,0 +1,32 @@
+From 0d37e6edc09c99e683dd91ca0e83bbc0df8477b3 Mon Sep 17 00:00:00 2001
+From: Felix Fietkau <nbd@nbd.name>
+Date: Sun, 16 Jul 2017 16:56:10 +0200
+Subject: lib: add uevent_next_seqnum()
+
+Signed-off-by: Felix Fietkau <nbd@nbd.name>
+---
+ include/linux/kobject.h |  5 +++++
+ lib/kobject_uevent.c    | 37 +++++++++++++++++++++++++++++++++++++
+ 2 files changed, 42 insertions(+)
+
+--- a/lib/kobject_uevent.c
++++ b/lib/kobject_uevent.c
+@@ -179,6 +179,18 @@ out:
+ 	return r;
+ }
+ 
++u64 uevent_next_seqnum(void)
++{
++	u64 seq;
++
++	mutex_lock(&uevent_sock_mutex);
++	seq = ++uevent_seqnum;
++	mutex_unlock(&uevent_sock_mutex);
++
++	return seq;
++}
++EXPORT_SYMBOL_GPL(uevent_next_seqnum);
++
+ /**
+  * kobject_synth_uevent - send synthetic uevent with arguments
+  *
diff --git a/target/linux/generic/hack-5.4/911-kobject_add_broadcast_uevent.patch b/target/linux/generic/hack-5.4/911-kobject_add_broadcast_uevent.patch
new file mode 100644
index 0000000000..06b94117c1
--- /dev/null
+++ b/target/linux/generic/hack-5.4/911-kobject_add_broadcast_uevent.patch
@@ -0,0 +1,76 @@
+From 0d37e6edc09c99e683dd91ca0e83bbc0df8477b3 Mon Sep 17 00:00:00 2001
+From: Felix Fietkau <nbd@nbd.name>
+Date: Sun, 16 Jul 2017 16:56:10 +0200
+Subject: lib: add uevent_next_seqnum()
+
+Signed-off-by: Felix Fietkau <nbd@nbd.name>
+---
+ include/linux/kobject.h |  5 +++++
+ lib/kobject_uevent.c    | 37 +++++++++++++++++++++++++++++++++++++
+ 2 files changed, 42 insertions(+)
+
+--- a/include/linux/kobject.h
++++ b/include/linux/kobject.h
+@@ -32,6 +32,8 @@
+ #define UEVENT_NUM_ENVP			32	/* number of env pointers */
+ #define UEVENT_BUFFER_SIZE		2048	/* buffer for the variables */
+ 
++struct sk_buff;
++
+ #ifdef CONFIG_UEVENT_HELPER
+ /* path to the userspace helper executed on an event */
+ extern char uevent_helper[];
+@@ -244,4 +246,7 @@ int kobject_synth_uevent(struct kobject
+ __printf(2, 3)
+ int add_uevent_var(struct kobj_uevent_env *env, const char *format, ...);
+ 
++int broadcast_uevent(struct sk_buff *skb, __u32 pid, __u32 group,
++		     gfp_t allocation);
++
+ #endif /* _KOBJECT_H_ */
+--- a/lib/kobject_uevent.c
++++ b/lib/kobject_uevent.c
+@@ -688,6 +688,43 @@ int add_uevent_var(struct kobj_uevent_en
+ EXPORT_SYMBOL_GPL(add_uevent_var);
+ 
+ #if defined(CONFIG_NET)
++int broadcast_uevent(struct sk_buff *skb, __u32 pid, __u32 group,
++		     gfp_t allocation)
++{
++	struct uevent_sock *ue_sk;
++	int err = 0;
++
++	/* send netlink message */
++	mutex_lock(&uevent_sock_mutex);
++	list_for_each_entry(ue_sk, &uevent_sock_list, list) {
++		struct sock *uevent_sock = ue_sk->sk;
++		struct sk_buff *skb2;
++
++		skb2 = skb_clone(skb, allocation);
++		if (!skb2)
++			break;
++
++		err = netlink_broadcast(uevent_sock, skb2, pid, group,
++					allocation);
++		if (err)
++			break;
++	}
++	mutex_unlock(&uevent_sock_mutex);
++
++	kfree_skb(skb);
++	return err;
++}
++#else
++int broadcast_uevent(struct sk_buff *skb, __u32 pid, __u32 group,
++		     gfp_t allocation)
++{
++	kfree_skb(skb);
++	return 0;
++}
++#endif
++EXPORT_SYMBOL_GPL(broadcast_uevent);
++
++#if defined(CONFIG_NET)
+ static int uevent_net_broadcast(struct sock *usk, struct sk_buff *skb,
+ 				struct netlink_ext_ack *extack)
+ {
diff --git a/target/linux/generic/hack-5.4/921-always-create-console-node-in-initramfs.patch b/target/linux/generic/hack-5.4/921-always-create-console-node-in-initramfs.patch
new file mode 100644
index 0000000000..e437579050
--- /dev/null
+++ b/target/linux/generic/hack-5.4/921-always-create-console-node-in-initramfs.patch
@@ -0,0 +1,40 @@
+From 5d301596fdc72f6cb672f72eb3c66e7cddefb103 Mon Sep 17 00:00:00 2001
+From: Felix Fietkau <nbd@nbd.name>
+Date: Sat, 8 Jul 2017 08:26:02 +0200
+Subject: initramfs: always create console node
+
+Signed-off-by: Felix Fietkau <nbd@nbd.name>
+---
+ usr/gen_initramfs_list.sh | 14 ++++++++++++++
+ 1 file changed, 14 insertions(+)
+
+--- a/usr/gen_initramfs_list.sh
++++ b/usr/gen_initramfs_list.sh
+@@ -59,6 +59,18 @@ default_initramfs() {
+ 	EOF
+ }
+ 
++list_openwrt_initramfs() {
++	:
++}
++
++openwrt_initramfs() {
++	# make sure that /dev/console exists
++	cat <<-EOF >> ${output}
++		dir /dev 0755 0 0
++		nod /dev/console 0600 0 0 c 5 1
++	EOF
++}
++
+ filetype() {
+ 	local argv1="$1"
+ 
+@@ -180,6 +192,8 @@ dir_filelist() {
+ 	if [  "$(echo "${dirlist}" | wc -l)" -gt 1 ]; then
+ 		${dep_list}print_mtime "$1"
+ 
++		${dep_list}openwrt_initramfs
++
+ 		echo "${dirlist}" | \
+ 		while read x; do
+ 			${dep_list}parse ${x}
diff --git a/target/linux/generic/hack-5.4/930-crashlog.patch b/target/linux/generic/hack-5.4/930-crashlog.patch
new file mode 100644
index 0000000000..bb16f22915
--- /dev/null
+++ b/target/linux/generic/hack-5.4/930-crashlog.patch
@@ -0,0 +1,338 @@
+From 6b1ab74a9917012d0c559edc4ed299d9228ac89f Mon Sep 17 00:00:00 2001
+From: Felix Fietkau <nbd@nbd.name>
+Date: Sat, 8 Jul 2017 08:26:47 +0200
+Subject: kernel: add the new 'crashlog' feature
+
+this tries to store kernel oops/panic logs in a fixed location in RAM to
+recover them available to user space using debugfs
+
+Signed-off-by: Felix Fietkau <nbd@nbd.name>
+---
+ include/linux/crashlog.h |  17 ++++
+ init/Kconfig             |   4 +
+ kernel/Makefile          |   1 +
+ kernel/crashlog.c        | 213 +++++++++++++++++++++++++++++++++++++++++++++++
+ kernel/module.c          |   3 +
+ mm/bootmem.c             |   2 +
+ mm/memblock.c            |   5 ++
+ 7 files changed, 245 insertions(+)
+ create mode 100644 include/linux/crashlog.h
+ create mode 100644 kernel/crashlog.c
+
+--- /dev/null
++++ b/include/linux/crashlog.h
+@@ -0,0 +1,17 @@
++#ifndef __CRASHLOG_H
++#define __CRASHLOG_H
++
++#ifdef CONFIG_CRASHLOG
++void crashlog_init_bootmem(struct bootmem_data *bdata);
++void crashlog_init_memblock(phys_addr_t addr, phys_addr_t size);
++#else
++static inline void crashlog_init_bootmem(struct bootmem_data *bdata)
++{
++}
++
++static inline void crashlog_init_memblock(phys_addr_t addr, phys_addr_t size)
++{
++}
++#endif
++
++#endif
+--- a/init/Kconfig
++++ b/init/Kconfig
+@@ -1049,6 +1049,10 @@ config RELAY
+ 
+ 	  If unsure, say N.
+ 
++config CRASHLOG
++	bool "Crash logging"
++	depends on (!NO_BOOTMEM || HAVE_MEMBLOCK)
++
+ config BLK_DEV_INITRD
+ 	bool "Initial RAM filesystem and RAM disk (initramfs/initrd) support"
+ 	help
+--- a/kernel/Makefile
++++ b/kernel/Makefile
+@@ -114,6 +114,7 @@ obj-$(CONFIG_TORTURE_TEST) += torture.o
+ obj-$(CONFIG_HAS_IOMEM) += iomem.o
+ obj-$(CONFIG_ZONE_DEVICE) += memremap.o
+ obj-$(CONFIG_RSEQ) += rseq.o
++obj-$(CONFIG_CRASHLOG) += crashlog.o
+ 
+ $(obj)/configs.o: $(obj)/config_data.h
+ 
+--- /dev/null
++++ b/kernel/crashlog.c
+@@ -0,0 +1,213 @@
++/*
++ * Crash information logger
++ * Copyright (C) 2010 Felix Fietkau <nbd@nbd.name>
++ *
++ * Based on ramoops.c
++ *   Copyright (C) 2010 Marco Stornelli <marco.stornelli@gmail.com>
++ *
++ * This program is free software; you can redistribute it and/or
++ * modify it under the terms of the GNU General Public License
++ * version 2 as published by the Free Software Foundation.
++ *
++ * This program is distributed in the hope that it will be useful, but
++ * WITHOUT ANY WARRANTY; without even the implied warranty of
++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
++ * General Public License for more details.
++ *
++ * You should have received a copy of the GNU General Public License
++ * along with this program; if not, write to the Free Software
++ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
++ * 02110-1301 USA
++ *
++ */
++
++#include <linux/module.h>
++#include <linux/bootmem.h>
++#include <linux/memblock.h>
++#include <linux/debugfs.h>
++#include <linux/crashlog.h>
++#include <linux/kmsg_dump.h>
++#include <linux/module.h>
++#include <linux/pfn.h>
++#include <linux/vmalloc.h>
++#include <asm/io.h>
++
++#define CRASHLOG_PAGES	4
++#define CRASHLOG_SIZE	(CRASHLOG_PAGES * PAGE_SIZE)
++#define CRASHLOG_MAGIC	0xa1eedead
++
++/*
++ * Start the log at 1M before the end of RAM, as some boot loaders like
++ * to use the end of the RAM for stack usage and other things
++ * If this fails, fall back to using the last part.
++ */
++#define CRASHLOG_OFFSET	(1024 * 1024)
++
++struct crashlog_data {
++	u32 magic;
++	u32 len;
++	u8 data[];
++};
++
++static struct debugfs_blob_wrapper crashlog_blob;
++static unsigned long crashlog_addr = 0;
++static struct crashlog_data *crashlog_buf;
++static struct kmsg_dumper dump;
++static bool first = true;
++
++extern struct list_head *crashlog_modules;
++
++static bool crashlog_set_addr(phys_addr_t addr, phys_addr_t size)
++{
++	/* Limit to lower 64 MB to avoid highmem */
++	phys_addr_t limit = 64 * 1024 * 1024;
++
++	if (crashlog_addr)
++		return false;
++
++	if (addr > limit)
++		return false;
++
++	if (addr + size > limit)
++		size = limit - addr;
++
++	crashlog_addr = addr;
++
++	if (addr + size > CRASHLOG_OFFSET)
++		crashlog_addr += size - CRASHLOG_OFFSET;
++
++	return true;
++}
++
++#ifndef CONFIG_NO_BOOTMEM
++void __init crashlog_init_bootmem(bootmem_data_t *bdata)
++{
++	phys_addr_t start, end;
++
++	start = PFN_PHYS(bdata->node_low_pfn);
++	end = PFN_PHYS(bdata->node_min_pfn);
++	if (!crashlog_set_addr(start, end - start))
++		return;
++
++	if (reserve_bootmem(crashlog_addr, CRASHLOG_SIZE, BOOTMEM_EXCLUSIVE) < 0) {
++		printk("Crashlog failed to allocate RAM at address 0x%lx\n",
++		       crashlog_addr);
++		crashlog_addr = 0;
++	}
++}
++#endif
++
++#ifdef CONFIG_HAVE_MEMBLOCK
++void __init_memblock crashlog_init_memblock(phys_addr_t addr, phys_addr_t size)
++{
++	if (!crashlog_set_addr(addr, size))
++		return;
++
++	if (memblock_reserve(crashlog_addr, CRASHLOG_SIZE)) {
++		printk("Crashlog failed to allocate RAM at address 0x%lx\n",
++		       crashlog_addr);
++		crashlog_addr = 0;
++	}
++}
++#endif
++
++static void __init crashlog_copy(void)
++{
++	if (crashlog_buf->magic != CRASHLOG_MAGIC)
++		return;
++
++	if (!crashlog_buf->len || crashlog_buf->len >
++	    CRASHLOG_SIZE - sizeof(*crashlog_buf))
++		return;
++
++	crashlog_blob.size = crashlog_buf->len;
++	crashlog_blob.data = kmemdup(crashlog_buf->data,
++		crashlog_buf->len, GFP_KERNEL);
++
++	debugfs_create_blob("crashlog", 0700, NULL, &crashlog_blob);
++}
++
++static int get_maxlen(void)
++{
++	return CRASHLOG_SIZE - sizeof(*crashlog_buf) - crashlog_buf->len;
++}
++
++static void crashlog_printf(const char *fmt, ...)
++{
++	va_list args;
++	int len = get_maxlen();
++
++	if (!len)
++		return;
++
++	va_start(args, fmt);
++	crashlog_buf->len += vscnprintf(
++		&crashlog_buf->data[crashlog_buf->len],
++		len, fmt, args);
++	va_end(args);
++}
++
++static void crashlog_do_dump(struct kmsg_dumper *dumper,
++		enum kmsg_dump_reason reason)
++{
++	struct timeval tv;
++	struct module *m;
++	char *buf;
++	size_t len;
++
++	if (!first)
++		crashlog_printf("\n===================================\n");
++
++	do_gettimeofday(&tv);
++	crashlog_printf("Time: %lu.%lu\n",
++		(long)tv.tv_sec, (long)tv.tv_usec);
++
++	if (first) {
++		crashlog_printf("Modules:");
++		list_for_each_entry(m, crashlog_modules, list) {
++			crashlog_printf("\t%s@%p+%x", m->name,
++			m->core_layout.base, m->core_layout.size,
++			m->init_layout.base, m->init_layout.size);
++		}
++		crashlog_printf("\n");
++		first = false;
++	}
++
++	buf = (char *)&crashlog_buf->data[crashlog_buf->len];
++
++	kmsg_dump_get_buffer(dumper, true, buf, get_maxlen(), &len);
++
++	crashlog_buf->len += len;
++}
++
++
++int __init crashlog_init_fs(void)
++{
++	struct page *pages[CRASHLOG_PAGES];
++	pgprot_t prot;
++	int i;
++
++	if (!crashlog_addr) {
++		printk("No memory allocated for crashlog\n");
++		return -ENOMEM;
++	}
++
++	printk("Crashlog allocated RAM at address 0x%lx\n", (unsigned long) crashlog_addr);
++	for (i = 0; i < CRASHLOG_PAGES; i++)
++		pages[i] = pfn_to_page((crashlog_addr >> PAGE_SHIFT) + i);
++
++	prot = pgprot_writecombine(PAGE_KERNEL);
++	crashlog_buf = vmap(pages, CRASHLOG_PAGES, VM_MAP, prot);
++
++	crashlog_copy();
++
++	crashlog_buf->magic = CRASHLOG_MAGIC;
++	crashlog_buf->len = 0;
++
++	dump.max_reason = KMSG_DUMP_OOPS;
++	dump.dump = crashlog_do_dump;
++	kmsg_dump_register(&dump);
++
++	return 0;
++}
++module_init(crashlog_init_fs);
+--- a/kernel/module.c
++++ b/kernel/module.c
+@@ -251,6 +251,9 @@ static void mod_update_bounds(struct mod
+ #ifdef CONFIG_KGDB_KDB
+ struct list_head *kdb_modules = &modules; /* kdb needs the list of modules */
+ #endif /* CONFIG_KGDB_KDB */
++#ifdef CONFIG_CRASHLOG
++struct list_head *crashlog_modules = &modules;
++#endif
+ 
+ static void module_assert_mutex(void)
+ {
+--- a/mm/bootmem.c
++++ b/mm/bootmem.c
+@@ -15,6 +15,7 @@
+ #include <linux/export.h>
+ #include <linux/kmemleak.h>
+ #include <linux/range.h>
++#include <linux/crashlog.h>
+ #include <linux/bug.h>
+ #include <linux/io.h>
+ #include <linux/bootmem.h>
+@@ -215,6 +216,7 @@ static unsigned long __init free_all_boo
+ 	if (!bdata->node_bootmem_map)
+ 		return 0;
+ 
++	crashlog_init_bootmem(bdata);
+ 	map = bdata->node_bootmem_map;
+ 	start = bdata->node_min_pfn;
+ 	end = bdata->node_low_pfn;
+--- a/mm/memblock.c
++++ b/mm/memblock.c
+@@ -21,6 +21,7 @@
+ #include <linux/seq_file.h>
+ #include <linux/memblock.h>
+ #include <linux/bootmem.h>
++#include <linux/crashlog.h>
+ 
+ #include <asm/sections.h>
+ #include <linux/io.h>
+@@ -547,6 +548,8 @@ static void __init_memblock memblock_ins
+ 	memblock_set_region_node(rgn, nid);
+ 	type->cnt++;
+ 	type->total_size += size;
++	if (type == &memblock.memory)
++		crashlog_init_memblock(base, size);
+ }
+ 
+ /**
+@@ -586,6 +589,8 @@ int __init_memblock memblock_add_range(s
+ 		type->regions[0].flags = flags;
+ 		memblock_set_region_node(&type->regions[0], nid);
+ 		type->total_size = size;
++		if (type == &memblock.memory)
++			crashlog_init_memblock(base, size);
+ 		return 0;
+ 	}
+ repeat:
diff --git a/target/linux/generic/pending-5.4/0931-w1-gpio-fix-problem-with-platfom-data-in-w1-gpio.patch b/target/linux/generic/pending-5.4/0931-w1-gpio-fix-problem-with-platfom-data-in-w1-gpio.patch
new file mode 100644
index 0000000000..be9ceebc3a
--- /dev/null
+++ b/target/linux/generic/pending-5.4/0931-w1-gpio-fix-problem-with-platfom-data-in-w1-gpio.patch
@@ -0,0 +1,26 @@
+From d9c8bc8c1408f3e8529db6e4e04017b4c579c342 Mon Sep 17 00:00:00 2001
+From: Pawel Dembicki <paweldembicki@gmail.com>
+Date: Sun, 18 Feb 2018 17:08:04 +0100
+Subject: [PATCH] w1: gpio: fix problem with platfom data in w1-gpio
+
+In devices, where fdt is used, is impossible to apply platform data
+without proper fdt node.
+
+This patch allow to use platform data in devices with fdt.
+
+Signed-off-by: Pawel Dembicki <paweldembicki@gmail.com>
+---
+ drivers/w1/masters/w1-gpio.c | 7 +++----
+ 1 file changed, 3 insertions(+), 4 deletions(-)
+
+--- a/drivers/w1/masters/w1-gpio.c
++++ b/drivers/w1/masters/w1-gpio.c
+@@ -79,7 +79,7 @@ static int w1_gpio_probe(struct platform
+ 	enum gpiod_flags gflags = GPIOD_OUT_LOW_OPEN_DRAIN;
+ 	int err;
+ 
+-	if (of_have_populated_dt()) {
++	if (of_have_populated_dt() && !dev_get_platdata(&pdev->dev)) {
+ 		pdata = devm_kzalloc(&pdev->dev, sizeof(*pdata), GFP_KERNEL);
+ 		if (!pdata)
+ 			return -ENOMEM;
diff --git a/target/linux/generic/pending-5.4/102-MIPS-only-process-negative-stack-offsets-on-stack-tr.patch b/target/linux/generic/pending-5.4/102-MIPS-only-process-negative-stack-offsets-on-stack-tr.patch
new file mode 100644
index 0000000000..0b87f493ec
--- /dev/null
+++ b/target/linux/generic/pending-5.4/102-MIPS-only-process-negative-stack-offsets-on-stack-tr.patch
@@ -0,0 +1,57 @@
+From: Felix Fietkau <nbd@nbd.name>
+Date: Wed, 18 Apr 2018 10:50:05 +0200
+Subject: [PATCH] MIPS: only process negative stack offsets on stack traces
+
+Fixes endless back traces in cases where the compiler emits a stack
+pointer increase in a branch delay slot (probably for some form of
+function return).
+
+[    3.475442] BUG: MAX_STACK_TRACE_ENTRIES too low!
+[    3.480070] turning off the locking correctness validator.
+[    3.485521] CPU: 0 PID: 1 Comm: swapper/0 Not tainted 4.14.34 #0
+[    3.491475] Stack : 00000000 00000000 00000000 00000000 80e0fce2 00000034 00000000 00000000
+[    3.499764]         87c3838c 80696377 8061047c 00000000 00000001 00000001 87c2d850 6534689f
+[    3.508059]         00000000 00000000 80e10000 00000000 00000000 000000cf 0000000f 00000000
+[    3.516353]         00000000 806a0000 00076891 00000000 00000000 00000000 ffffffff 00000000
+[    3.524648]         806c0000 00000004 80e10000 806a0000 00000003 80690000 00000000 80700000
+[    3.532942]         ...
+[    3.535362] Call Trace:
+[    3.537818] [<80010a48>] show_stack+0x58/0x100
+[    3.542207] [<804c2f78>] dump_stack+0xe8/0x170
+[    3.546613] [<80079f90>] save_trace+0xf0/0x110
+[    3.551010] [<8007b1ec>] mark_lock+0x33c/0x78c
+[    3.555413] [<8007bf48>] __lock_acquire+0x2ac/0x1a08
+[    3.560337] [<8007de60>] lock_acquire+0x64/0x8c
+[    3.564846] [<804e1570>] _raw_spin_lock_irqsave+0x54/0x78
+[    3.570186] [<801b618c>] kernfs_notify+0x94/0xac
+[    3.574770] [<801b7b10>] sysfs_notify+0x74/0xa0
+[    3.579257] [<801b618c>] kernfs_notify+0x94/0xac
+[    3.583839] [<801b7b10>] sysfs_notify+0x74/0xa0
+[    3.588329] [<801b618c>] kernfs_notify+0x94/0xac
+[    3.592911] [<801b7b10>] sysfs_notify+0x74/0xa0
+[    3.597401] [<801b618c>] kernfs_notify+0x94/0xac
+[    3.601983] [<801b7b10>] sysfs_notify+0x74/0xa0
+[    3.606473] [<801b618c>] kernfs_notify+0x94/0xac
+[    3.611055] [<801b7b10>] sysfs_notify+0x74/0xa0
+[    3.615545] [<801b618c>] kernfs_notify+0x94/0xac
+[    3.620125] [<801b7b10>] sysfs_notify+0x74/0xa0
+[    3.624619] [<801b618c>] kernfs_notify+0x94/0xac
+[    3.629197] [<801b7b10>] sysfs_notify+0x74/0xa0
+[    3.633691] [<801b618c>] kernfs_notify+0x94/0xac
+[    3.638269] [<801b7b10>] sysfs_notify+0x74/0xa0
+[    3.642763] [<801b618c>] kernfs_notify+0x94/0xac
+
+Signed-off-by: Felix Fietkau <nbd@nbd.name>
+---
+
+--- a/arch/mips/kernel/process.c
++++ b/arch/mips/kernel/process.c
+@@ -361,6 +361,8 @@ static inline int is_sp_move_ins(union m
+ 
+ 	if (ip->i_format.opcode == addiu_op ||
+ 	    ip->i_format.opcode == daddiu_op) {
++		if (ip->i_format.simmediate > 0)
++			return 0;
+ 		*frame_size = -ip->i_format.simmediate;
+ 		return 1;
+ 	}
diff --git a/target/linux/generic/pending-5.4/103-MIPS-perf-ath79-Fix-perfcount-IRQ-assignment.patch b/target/linux/generic/pending-5.4/103-MIPS-perf-ath79-Fix-perfcount-IRQ-assignment.patch
new file mode 100644
index 0000000000..6b74c7da1d
--- /dev/null
+++ b/target/linux/generic/pending-5.4/103-MIPS-perf-ath79-Fix-perfcount-IRQ-assignment.patch
@@ -0,0 +1,110 @@
+From 852a88f35f4b7e5ebb717fed3c3a3330d5ad4336 Mon Sep 17 00:00:00 2001
+From: =?UTF-8?q?Petr=20=C5=A0tetiar?= <ynezz@true.cz>
+Date: Wed, 10 Apr 2019 16:43:27 +0200
+Subject: [PATCH v2] MIPS: perf: ath79: Fix perfcount IRQ assignment
+MIME-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+
+Currently it's not possible to use perf on ath79 due to genirq flags
+mismatch happening on static virtual IRQ 13 which is used for
+performance counters hardware IRQ 5.
+
+On TP-Link Archer C7v5:
+
+           CPU0
+  2:          0      MIPS   2  ath9k
+  4:        318      MIPS   4  19000000.eth
+  7:      55034      MIPS   7  timer
+  8:       1236      MISC   3  ttyS0
+ 12:          0      INTC   1  ehci_hcd:usb1
+ 13:          0  gpio-ath79   2  keys
+ 14:          0  gpio-ath79   5  keys
+ 15:         31  AR724X PCI    1  ath10k_pci
+
+ $ perf top
+ genirq: Flags mismatch irq 13. 00014c83 (mips_perf_pmu) vs. 00002003 (keys)
+
+On TP-Link Archer C7v4:
+
+         CPU0
+  4:          0      MIPS   4  19000000.eth
+  5:       7135      MIPS   5  1a000000.eth
+  7:      98379      MIPS   7  timer
+  8:         30      MISC   3  ttyS0
+ 12:      90028      INTC   0  ath9k
+ 13:       5520      INTC   1  ehci_hcd:usb1
+ 14:       4623      INTC   2  ehci_hcd:usb2
+ 15:      32844  AR724X PCI    1  ath10k_pci
+ 16:          0  gpio-ath79  16  keys
+ 23:          0  gpio-ath79  23  keys
+
+ $ perf top
+ genirq: Flags mismatch irq 13. 00014c80 (mips_perf_pmu) vs. 00000080 (ehci_hcd:usb1)
+
+This problem is happening, because currently statically assigned virtual
+IRQ 13 for performance counters is not claimed during the initialization
+of MIPS PMU during the bootup, so the IRQ subsystem doesn't know, that
+this interrupt isn't available for further use.
+
+So this patch fixes the issue by simply booking hardware IRQ 5 for MIPS PMU.
+
+Tested-by: Kevin 'ldir' Darbyshire-Bryant <ldir@darbyshire-bryant.me.uk>
+Signed-off-by: Petr Å tetiar <ynezz@true.cz>
+---
+
+Changes since v1:
+
+ I've incorporated two comments which I've received on IRC from blogic and
+ I've also reworded the commit message to match the changes in v2 of this
+ patch.
+
+  * use actual hardware perfcount IRQ 5 instead of the virtual IRQ 13
+  * dropped the CONFIG_PERF_EVENTS ifdef around irq_create_mapping
+
+ arch/mips/ath79/setup.c          |  6 ------
+ drivers/irqchip/irq-ath79-misc.c | 11 +++++++++++
+ 2 files changed, 11 insertions(+), 6 deletions(-)
+
+--- a/arch/mips/ath79/setup.c
++++ b/arch/mips/ath79/setup.c
+@@ -211,12 +211,6 @@ const char *get_system_type(void)
+ 	return ath79_sys_type;
+ }
+ 
+-int get_c0_perfcount_int(void)
+-{
+-	return ATH79_MISC_IRQ(5);
+-}
+-EXPORT_SYMBOL_GPL(get_c0_perfcount_int);
+-
+ unsigned int get_c0_compare_int(void)
+ {
+ 	return CP0_LEGACY_COMPARE_IRQ;
+--- a/drivers/irqchip/irq-ath79-misc.c
++++ b/drivers/irqchip/irq-ath79-misc.c
+@@ -22,6 +22,15 @@
+ #define AR71XX_RESET_REG_MISC_INT_ENABLE	4
+ 
+ #define ATH79_MISC_IRQ_COUNT			32
++#define ATH79_MISC_PERF_IRQ			5
++
++static int ath79_perfcount_irq;
++
++int get_c0_perfcount_int(void)
++{
++	return ath79_perfcount_irq;
++}
++EXPORT_SYMBOL_GPL(get_c0_perfcount_int);
+ 
+ static void ath79_misc_irq_handler(struct irq_desc *desc)
+ {
+@@ -113,6 +122,8 @@ static void __init ath79_misc_intc_domai
+ {
+ 	void __iomem *base = domain->host_data;
+ 
++	ath79_perfcount_irq = irq_create_mapping(domain, ATH79_MISC_PERF_IRQ);
++
+ 	/* Disable and clear all interrupts */
+ 	__raw_writel(0, base + AR71XX_RESET_REG_MISC_INT_ENABLE);
+ 	__raw_writel(0, base + AR71XX_RESET_REG_MISC_INT_STATUS);
diff --git a/target/linux/generic/pending-5.4/110-ehci_hcd_ignore_oc.patch b/target/linux/generic/pending-5.4/110-ehci_hcd_ignore_oc.patch
new file mode 100644
index 0000000000..cad00b5527
--- /dev/null
+++ b/target/linux/generic/pending-5.4/110-ehci_hcd_ignore_oc.patch
@@ -0,0 +1,79 @@
+From: Florian Fainelli <florian@openwrt.org>
+Subject: USB: EHCI: add ignore_oc flag to disable overcurrent checking
+
+This patch adds an ignore_oc flag which can be set by EHCI controller
+not supporting or wanting to disable overcurrent checking. The EHCI
+platform data in include/linux/usb/ehci_pdriver.h is also augmented to
+take advantage of this new flag.
+
+Signed-off-by: Florian Fainelli <florian@openwrt.org>
+---
+ drivers/usb/host/ehci-hcd.c      |    2 +-
+ drivers/usb/host/ehci-hub.c      |    4 ++--
+ drivers/usb/host/ehci-platform.c |    1 +
+ drivers/usb/host/ehci.h          |    1 +
+ include/linux/usb/ehci_pdriver.h |    1 +
+ 5 files changed, 6 insertions(+), 3 deletions(-)
+
+--- a/drivers/usb/host/ehci-hcd.c
++++ b/drivers/usb/host/ehci-hcd.c
+@@ -638,7 +638,7 @@ static int ehci_run (struct usb_hcd *hcd
+ 		"USB %x.%x started, EHCI %x.%02x%s\n",
+ 		((ehci->sbrn & 0xf0)>>4), (ehci->sbrn & 0x0f),
+ 		temp >> 8, temp & 0xff,
+-		ignore_oc ? ", overcurrent ignored" : "");
++		(ignore_oc || ehci->ignore_oc) ? ", overcurrent ignored" : "");
+ 
+ 	ehci_writel(ehci, INTR_MASK,
+ 		    &ehci->regs->intr_enable); /* Turn On Interrupts */
+--- a/drivers/usb/host/ehci-hub.c
++++ b/drivers/usb/host/ehci-hub.c
+@@ -641,7 +641,7 @@ ehci_hub_status_data (struct usb_hcd *hc
+ 	 * always set, seem to clear PORT_OCC and PORT_CSC when writing to
+ 	 * PORT_POWER; that's surprising, but maybe within-spec.
+ 	 */
+-	if (!ignore_oc)
++	if (!ignore_oc && !ehci->ignore_oc)
+ 		mask = PORT_CSC | PORT_PEC | PORT_OCC;
+ 	else
+ 		mask = PORT_CSC | PORT_PEC;
+@@ -1011,7 +1011,7 @@ int ehci_hub_control(
+ 		if (temp & PORT_PEC)
+ 			status |= USB_PORT_STAT_C_ENABLE << 16;
+ 
+-		if ((temp & PORT_OCC) && !ignore_oc){
++		if ((temp & PORT_OCC) && (!ignore_oc && !ehci->ignore_oc)){
+ 			status |= USB_PORT_STAT_C_OVERCURRENT << 16;
+ 
+ 			/*
+--- a/drivers/usb/host/ehci-platform.c
++++ b/drivers/usb/host/ehci-platform.c
+@@ -208,6 +208,8 @@ static int ehci_platform_probe(struct pl
+ 		hcd->has_tt = 1;
+ 	if (pdata->reset_on_resume)
+ 		priv->reset_on_resume = true;
++	if (pdata->ignore_oc)
++		ehci->ignore_oc = 1;
+ 
+ #ifndef CONFIG_USB_EHCI_BIG_ENDIAN_MMIO
+ 	if (ehci->big_endian_mmio) {
+--- a/drivers/usb/host/ehci.h
++++ b/drivers/usb/host/ehci.h
+@@ -218,6 +218,7 @@ struct ehci_hcd {			/* one per controlle
+ 	unsigned		frame_index_bug:1; /* MosChip (AKA NetMos) */
+ 	unsigned		need_oc_pp_cycle:1; /* MPC834X port power */
+ 	unsigned		imx28_write_fix:1; /* For Freescale i.MX28 */
++	unsigned		ignore_oc:1;
+ 
+ 	/* required for usb32 quirk */
+ 	#define OHCI_CTRL_HCFS          (3 << 6)
+--- a/include/linux/usb/ehci_pdriver.h
++++ b/include/linux/usb/ehci_pdriver.h
+@@ -50,6 +50,7 @@ struct usb_ehci_pdata {
+ 	unsigned	no_io_watchdog:1;
+ 	unsigned	reset_on_resume:1;
+ 	unsigned	dma_mask_64:1;
++	unsigned	ignore_oc:1;
+ 
+ 	/* Turn on all power and clocks */
+ 	int (*power_on)(struct platform_device *pdev);
diff --git a/target/linux/generic/pending-5.4/120-Fix-alloc_node_mem_map-with-ARCH_PFN_OFFSET-calcu.patch b/target/linux/generic/pending-5.4/120-Fix-alloc_node_mem_map-with-ARCH_PFN_OFFSET-calcu.patch
new file mode 100644
index 0000000000..ec541a865c
--- /dev/null
+++ b/target/linux/generic/pending-5.4/120-Fix-alloc_node_mem_map-with-ARCH_PFN_OFFSET-calcu.patch
@@ -0,0 +1,82 @@
+From: Tobias Wolf <dev-NTEO@vplace.de>
+Subject: mm: Fix alloc_node_mem_map with ARCH_PFN_OFFSET calculation
+
+An rt288x (ralink) based router (Belkin F5D8235 v1) does not boot with any
+kernel beyond version 4.3 resulting in:
+
+BUG: Bad page state in process swapper  pfn:086ac
+
+bisect resulted in:
+
+a1c34a3bf00af2cede839879502e12dc68491ad5 is the first bad commit
+commit a1c34a3bf00af2cede839879502e12dc68491ad5
+Author: Laura Abbott <laura@labbott.name>
+Date:   Thu Nov 5 18:48:46 2015 -0800
+
+    mm: Don't offset memmap for flatmem
+
+    Srinivas Kandagatla reported bad page messages when trying to remove the
+    bottom 2MB on an ARM based IFC6410 board
+
+      BUG: Bad page state in process swapper  pfn:fffa8
+      page:ef7fb500 count:0 mapcount:0 mapping:  (null) index:0x0
+      flags: 0x96640253(locked|error|dirty|active|arch_1|reclaim|mlocked)
+      page dumped because: PAGE_FLAGS_CHECK_AT_FREE flag(s) set
+      bad because of flags:
+      flags: 0x200041(locked|active|mlocked)
+      Modules linked in:
+      CPU: 0 PID: 0 Comm: swapper Not tainted 3.19.0-rc3-00007-g412f9ba-dirty
+#816
+      Hardware name: Qualcomm (Flattened Device Tree)
+        unwind_backtrace
+        show_stack
+        dump_stack
+        bad_page
+        free_pages_prepare
+        free_hot_cold_page
+        __free_pages
+        free_highmem_page
+        mem_init
+        start_kernel
+      Disabling lock debugging due to kernel taint
+    [...]
+:040000 040000 2de013c372345fd471cd58f0553c9b38b0ef1cc4
+0a8156f848733dfa21e16c196dfb6c0a76290709 M      mm
+
+This fix for ARM does not account ARCH_PFN_OFFSET for mem_map as later used by
+page_to_pfn anymore.
+
+The following output was generated with two hacked in printk statements:
+
+printk("before %p vs. %p or %p\n", mem_map, mem_map - offset, mem_map -
+(pgdat->node_start_pfn - ARCH_PFN_OFFSET));
+		if (page_to_pfn(mem_map) != pgdat->node_start_pfn)
+			mem_map -= offset + (pgdat->node_start_pfn - ARCH_PFN_OFFSET);
+printk("after %p\n", mem_map);
+
+Output:
+
+[    0.000000] before 8861b280 vs. 8861b280 or 8851b280
+[    0.000000] after 8851b280
+
+As seen in the first line mem_map with subtraction of offset does not equal the
+mem_map after subtraction of ARCH_PFN_OFFSET.
+
+After adding the offset of ARCH_PFN_OFFSET as well to mem_map as the
+previously calculated offset is zero for the named platform it is able to boot
+4.4 and 4.9-rc7 again.
+
+Signed-off-by: Tobias Wolf <dev-NTEO@vplace.de>
+---
+
+--- a/mm/page_alloc.c
++++ b/mm/page_alloc.c
+@@ -6400,7 +6400,7 @@ static void __ref alloc_node_mem_map(str
+ 		mem_map = NODE_DATA(0)->node_mem_map;
+ #if defined(CONFIG_HAVE_MEMBLOCK_NODE_MAP) || defined(CONFIG_FLATMEM)
+ 		if (page_to_pfn(mem_map) != pgdat->node_start_pfn)
+-			mem_map -= offset;
++			mem_map -= offset + (pgdat->node_start_pfn - ARCH_PFN_OFFSET);
+ #endif /* CONFIG_HAVE_MEMBLOCK_NODE_MAP */
+ 	}
+ #endif
diff --git a/target/linux/generic/pending-5.4/130-add-linux-spidev-compatible-si3210.patch b/target/linux/generic/pending-5.4/130-add-linux-spidev-compatible-si3210.patch
new file mode 100644
index 0000000000..3a42182c97
--- /dev/null
+++ b/target/linux/generic/pending-5.4/130-add-linux-spidev-compatible-si3210.patch
@@ -0,0 +1,18 @@
+From: Giuseppe Lippolis <giu.lippolis@gmail.com>
+Subject: Add the linux,spidev compatible in spidev Several device in ramips have this binding in the dts
+
+Signed-off-by: Giuseppe Lippolis <giu.lippolis@gmail.com>
+---
+ drivers/spi/spidev.c | 1 +
+ 1 file changed, 1 insertion(+)
+
+--- a/drivers/spi/spidev.c
++++ b/drivers/spi/spidev.c
+@@ -672,6 +672,7 @@ static const struct of_device_id spidev_
+ 	{ .compatible = "lineartechnology,ltc2488" },
+ 	{ .compatible = "ge,achc" },
+ 	{ .compatible = "semtech,sx1301" },
++	{ .compatible = "siliconlabs,si3210" },
+ 	{},
+ };
+ MODULE_DEVICE_TABLE(of, spidev_dt_ids);
diff --git a/target/linux/generic/pending-5.4/131-spi-use-gpio_set_value_cansleep-for-setting-chipsele.patch b/target/linux/generic/pending-5.4/131-spi-use-gpio_set_value_cansleep-for-setting-chipsele.patch
new file mode 100644
index 0000000000..bd5ed6f888
--- /dev/null
+++ b/target/linux/generic/pending-5.4/131-spi-use-gpio_set_value_cansleep-for-setting-chipsele.patch
@@ -0,0 +1,20 @@
+From: Felix Fietkau <nbd@nbd.name>
+Subject: spi: use gpio_set_value_cansleep for setting chipselect GPIO
+
+Sleeping is safe inside spi_transfer_one_message, and some GPIO chips
+need to sleep for setting values
+
+Signed-off-by: Felix Fietkau <nbd@nbd.name>
+---
+
+--- a/drivers/spi/spi.c
++++ b/drivers/spi/spi.c
+@@ -733,7 +733,7 @@ static void spi_set_cs(struct spi_device
+ 		enable = !enable;
+ 
+ 	if (gpio_is_valid(spi->cs_gpio)) {
+-		gpio_set_value(spi->cs_gpio, !enable);
++		gpio_set_value_cansleep(spi->cs_gpio, !enable);
+ 		/* Some SPI masters need both GPIO CS & slave_select */
+ 		if ((spi->controller->flags & SPI_MASTER_GPIO_SS) &&
+ 		    spi->controller->set_cs)
diff --git a/target/linux/generic/pending-5.4/132-spi-spi-gpio-fix-crash-when-num-chipselects-is-0.patch b/target/linux/generic/pending-5.4/132-spi-spi-gpio-fix-crash-when-num-chipselects-is-0.patch
new file mode 100644
index 0000000000..ed94f937c9
--- /dev/null
+++ b/target/linux/generic/pending-5.4/132-spi-spi-gpio-fix-crash-when-num-chipselects-is-0.patch
@@ -0,0 +1,64 @@
+From 0f76408d8c1cb0979f4286dd23912e6e59784b35 Mon Sep 17 00:00:00 2001
+From: DENG Qingfang <dqfext@gmail.com>
+Date: Thu, 19 Sep 2019 11:42:55 +0200
+Subject: [PATCH] spi: spi-gpio: fix crash when num-chipselects is 0
+MIME-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+
+If an spi-gpio was specified with num-chipselects = <0> in dts, kernel will crash:
+
+Unable to handle kernel paging request at virtual address 32697073
+pgd = (ptrval)
+[32697073] *pgd=00000000
+Internal error: Oops: 5 [# 1] SMP ARM
+Modules linked in:
+CPU: 2 PID: 1 Comm: swapper/0 Not tainted 4.19.72 #0
+Hardware name: Generic DT based system
+PC is at validate_desc+0x28/0x80
+LR is at gpiod_direction_output+0x14/0x128
+...
+[<c0544db4>] (validate_desc) from [<c0545228>] (gpiod_direction_output+0x14/0x128)
+[<c0545228>] (gpiod_direction_output) from [<c05fa714>] (spi_gpio_setup+0x58/0x64)
+[<c05fa714>] (spi_gpio_setup) from [<c05f7258>] (spi_setup+0x12c/0x148)
+[<c05f7258>] (spi_setup) from [<c05f7330>] (spi_add_device+0xbc/0x12c)
+[<c05f7330>] (spi_add_device) from [<c05f7f74>] (spi_register_controller+0x838/0x924)
+[<c05f7f74>] (spi_register_controller) from [<c05fa494>] (spi_bitbang_start+0x108/0x120)
+[<c05fa494>] (spi_bitbang_start) from [<c05faa34>] (spi_gpio_probe+0x314/0x338)
+[<c05faa34>] (spi_gpio_probe) from [<c05a844c>] (platform_drv_probe+0x34/0x70)
+
+The cause is spi_gpio_setup() did not check if the spi-gpio has chipselect pins
+before setting their direction and results in derefing an invalid pointer.
+
+The bug is spotted in kernel 4.19.72 on OpenWrt, and does not occur in 4.14.
+
+There is a similar fix upstream 249e2632dcd0509b8f8f296f5aabf4d48dfd6da8.
+
+Ref: https://patchwork.kernel.org/patch/11150619/
+Cc: Linus Walleij <linus.walleij@linaro.org>
+Cc: stable@vger.kernel.org
+Signed-off-by: DENG Qingfang <dqfext@gmail.com>
+Signed-off-by: Petr Å tetiar <ynezz@true.cz>
+---
+ drivers/spi/spi-gpio.c | 10 ++++++----
+ 1 file changed, 6 insertions(+), 4 deletions(-)
+
+--- a/drivers/spi/spi-gpio.c
++++ b/drivers/spi/spi-gpio.c
+@@ -242,10 +242,12 @@ static int spi_gpio_setup(struct spi_dev
+ 	 * The CS GPIOs have already been
+ 	 * initialized from the descriptor lookup.
+ 	 */
+-	cs = spi_gpio->cs_gpios[spi->chip_select];
+-	if (!spi->controller_state && cs)
+-		status = gpiod_direction_output(cs,
+-						!(spi->mode & SPI_CS_HIGH));
++	if (spi_gpio->has_cs) {
++		cs = spi_gpio->cs_gpios[spi->chip_select];
++		if (!spi->controller_state && cs)
++			status = gpiod_direction_output(cs,
++						  !(spi->mode & SPI_CS_HIGH));
++	}
+ 
+ 	if (!status)
+ 		status = spi_bitbang_setup(spi);
diff --git a/target/linux/generic/pending-5.4/140-jffs2-use-.rename2-and-add-RENAME_WHITEOUT-support.patch b/target/linux/generic/pending-5.4/140-jffs2-use-.rename2-and-add-RENAME_WHITEOUT-support.patch
new file mode 100644
index 0000000000..c97e93250b
--- /dev/null
+++ b/target/linux/generic/pending-5.4/140-jffs2-use-.rename2-and-add-RENAME_WHITEOUT-support.patch
@@ -0,0 +1,62 @@
+From: Felix Fietkau <nbd@nbd.name>
+Subject: jffs2: use .rename2 and add RENAME_WHITEOUT support
+
+It is required for renames on overlayfs
+
+Signed-off-by: Felix Fietkau <nbd@nbd.name>
+---
+
+--- a/fs/jffs2/dir.c
++++ b/fs/jffs2/dir.c
+@@ -752,6 +752,24 @@ static int jffs2_mknod (struct inode *di
+ 	return ret;
+ }
+ 
++static int jffs2_whiteout (struct inode *old_dir, struct dentry *old_dentry)
++{
++	struct dentry *wh;
++	int err;
++
++	wh = d_alloc(old_dentry->d_parent, &old_dentry->d_name);
++	if (!wh)
++		return -ENOMEM;
++
++	err = jffs2_mknod(old_dir, wh, S_IFCHR | WHITEOUT_MODE,
++			  WHITEOUT_DEV);
++	if (err)
++		return err;
++
++	d_rehash(wh);
++	return 0;
++}
++
+ static int jffs2_rename (struct inode *old_dir_i, struct dentry *old_dentry,
+ 			 struct inode *new_dir_i, struct dentry *new_dentry,
+ 			 unsigned int flags)
+@@ -762,7 +780,7 @@ static int jffs2_rename (struct inode *o
+ 	uint8_t type;
+ 	uint32_t now;
+ 
+-	if (flags & ~RENAME_NOREPLACE)
++	if (flags & ~(RENAME_NOREPLACE|RENAME_WHITEOUT))
+ 		return -EINVAL;
+ 
+ 	/* The VFS will check for us and prevent trying to rename a
+@@ -828,9 +846,14 @@ static int jffs2_rename (struct inode *o
+ 	if (d_is_dir(old_dentry) && !victim_f)
+ 		inc_nlink(new_dir_i);
+ 
+-	/* Unlink the original */
+-	ret = jffs2_do_unlink(c, JFFS2_INODE_INFO(old_dir_i),
+-			      old_dentry->d_name.name, old_dentry->d_name.len, NULL, now);
++	if (flags & RENAME_WHITEOUT)
++		/* Replace with whiteout */
++		ret = jffs2_whiteout(old_dir_i, old_dentry);
++	else
++		/* Unlink the original */
++		ret = jffs2_do_unlink(c, JFFS2_INODE_INFO(old_dir_i),
++				      old_dentry->d_name.name,
++				      old_dentry->d_name.len, NULL, now);
+ 
+ 	/* We don't touch inode->i_nlink */
+ 
diff --git a/target/linux/generic/pending-5.4/141-jffs2-add-RENAME_EXCHANGE-support.patch b/target/linux/generic/pending-5.4/141-jffs2-add-RENAME_EXCHANGE-support.patch
new file mode 100644
index 0000000000..093a73ab66
--- /dev/null
+++ b/target/linux/generic/pending-5.4/141-jffs2-add-RENAME_EXCHANGE-support.patch
@@ -0,0 +1,73 @@
+From: Felix Fietkau <nbd@nbd.name>
+Subject: jffs2: add RENAME_EXCHANGE support
+
+Signed-off-by: Felix Fietkau <nbd@nbd.name>
+---
+
+--- a/fs/jffs2/dir.c
++++ b/fs/jffs2/dir.c
+@@ -777,18 +777,31 @@ static int jffs2_rename (struct inode *o
+ 	int ret;
+ 	struct jffs2_sb_info *c = JFFS2_SB_INFO(old_dir_i->i_sb);
+ 	struct jffs2_inode_info *victim_f = NULL;
++	struct inode *fst_inode = d_inode(old_dentry);
++	struct inode *snd_inode = d_inode(new_dentry);
+ 	uint8_t type;
+ 	uint32_t now;
+ 
+-	if (flags & ~(RENAME_NOREPLACE|RENAME_WHITEOUT))
++	if (flags & ~(RENAME_NOREPLACE|RENAME_WHITEOUT|RENAME_EXCHANGE))
+ 		return -EINVAL;
+ 
++	if ((flags & RENAME_EXCHANGE) && (old_dir_i != new_dir_i)) {
++		if (S_ISDIR(fst_inode->i_mode) && !S_ISDIR(snd_inode->i_mode)) {
++			inc_nlink(new_dir_i);
++			drop_nlink(old_dir_i);
++		}
++		else if (!S_ISDIR(fst_inode->i_mode) && S_ISDIR(snd_inode->i_mode)) {
++			drop_nlink(new_dir_i);
++			inc_nlink(old_dir_i);
++		}
++	}
++
+ 	/* The VFS will check for us and prevent trying to rename a
+ 	 * file over a directory and vice versa, but if it's a directory,
+ 	 * the VFS can't check whether the victim is empty. The filesystem
+ 	 * needs to do that for itself.
+ 	 */
+-	if (d_really_is_positive(new_dentry)) {
++	if (d_really_is_positive(new_dentry) && !(flags & RENAME_EXCHANGE)) {
+ 		victim_f = JFFS2_INODE_INFO(d_inode(new_dentry));
+ 		if (d_is_dir(new_dentry)) {
+ 			struct jffs2_full_dirent *fd;
+@@ -823,7 +836,7 @@ static int jffs2_rename (struct inode *o
+ 	if (ret)
+ 		return ret;
+ 
+-	if (victim_f) {
++	if (victim_f && !(flags & RENAME_EXCHANGE)) {
+ 		/* There was a victim. Kill it off nicely */
+ 		if (d_is_dir(new_dentry))
+ 			clear_nlink(d_inode(new_dentry));
+@@ -849,6 +862,12 @@ static int jffs2_rename (struct inode *o
+ 	if (flags & RENAME_WHITEOUT)
+ 		/* Replace with whiteout */
+ 		ret = jffs2_whiteout(old_dir_i, old_dentry);
++	else if (flags & RENAME_EXCHANGE)
++		/* Replace the original */
++		ret = jffs2_do_link(c, JFFS2_INODE_INFO(old_dir_i),
++				    d_inode(new_dentry)->i_ino, type,
++				    old_dentry->d_name.name, old_dentry->d_name.len,
++				    now);
+ 	else
+ 		/* Unlink the original */
+ 		ret = jffs2_do_unlink(c, JFFS2_INODE_INFO(old_dir_i),
+@@ -880,7 +899,7 @@ static int jffs2_rename (struct inode *o
+ 		return ret;
+ 	}
+ 
+-	if (d_is_dir(old_dentry))
++	if (d_is_dir(old_dentry) && !(flags & RENAME_EXCHANGE))
+ 		drop_nlink(old_dir_i);
+ 
+ 	new_dir_i->i_mtime = new_dir_i->i_ctime = old_dir_i->i_mtime = old_dir_i->i_ctime = ITIME(now);
diff --git a/target/linux/generic/pending-5.4/150-bridge_allow_receiption_on_disabled_port.patch b/target/linux/generic/pending-5.4/150-bridge_allow_receiption_on_disabled_port.patch
new file mode 100644
index 0000000000..583c34a448
--- /dev/null
+++ b/target/linux/generic/pending-5.4/150-bridge_allow_receiption_on_disabled_port.patch
@@ -0,0 +1,45 @@
+From: Stephen Hemminger <stephen@networkplumber.org>
+Subject: bridge: allow receiption on disabled port
+
+When an ethernet device is enslaved to a bridge, and the bridge STP
+detects loss of carrier (or operational state down), then normally
+packet receiption is blocked.
+
+This breaks control applications like WPA which maybe expecting to
+receive packets to negotiate to bring link up. The bridge needs to
+block forwarding packets from these disabled ports, but there is no
+hard requirement to not allow local packet delivery.
+
+Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
+Signed-off-by: Felix Fietkau <nbd@nbd.name>
+
+--- a/net/bridge/br_input.c
++++ b/net/bridge/br_input.c
+@@ -193,6 +193,9 @@ static void __br_handle_local_finish(str
+ /* note: already called with rcu_read_lock */
+ static int br_handle_local_finish(struct net *net, struct sock *sk, struct sk_buff *skb)
+ {
++	struct net_bridge_port *p = br_port_get_rcu(skb->dev);
++
++	if (p->state != BR_STATE_DISABLED)
+ 	__br_handle_local_finish(skb);
+ 
+ 	/* return 1 to signal the okfn() was called so it's ok to use the skb */
+@@ -289,6 +292,17 @@ rx_handler_result_t br_handle_frame(stru
+ 
+ forward:
+ 	switch (p->state) {
++	case BR_STATE_DISABLED:
++		if (ether_addr_equal(p->br->dev->dev_addr, dest))
++			skb->pkt_type = PACKET_HOST;
++
++		if (NF_HOOK(NFPROTO_BRIDGE, NF_BR_PRE_ROUTING,
++			dev_net(skb->dev), NULL, skb, skb->dev, NULL,
++			br_handle_local_finish) == 1) {
++			return RX_HANDLER_PASS;
++		}
++		break;
++
+ 	case BR_STATE_FORWARDING:
+ 		rhook = rcu_dereference(br_should_route_hook);
+ 		if (rhook) {
diff --git a/target/linux/generic/pending-5.4/180-net-phy-at803x-add-support-for-AT8032.patch b/target/linux/generic/pending-5.4/180-net-phy-at803x-add-support-for-AT8032.patch
new file mode 100644
index 0000000000..e496301e4e
--- /dev/null
+++ b/target/linux/generic/pending-5.4/180-net-phy-at803x-add-support-for-AT8032.patch
@@ -0,0 +1,63 @@
+From: Felix Fietkau <nbd@nbd.name>
+Subject: net: phy: at803x: add support for AT8032
+
+Like AT8030, this PHY needs the GPIO reset workaround
+
+Signed-off-by: Felix Fietkau <nbd@nbd.name>
+---
+
+--- a/drivers/net/phy/at803x.c
++++ b/drivers/net/phy/at803x.c
+@@ -62,8 +62,10 @@
+ 
+ #define ATH8030_PHY_ID 0x004dd076
+ #define ATH8031_PHY_ID 0x004dd074
++#define ATH8032_PHY_ID 0x004dd023
+ #define ATH8035_PHY_ID 0x004dd072
+ #define AT803X_PHY_ID_MASK			0xffffffef
++#define AT8032_PHY_ID_MASK			0xffffffff
+ 
+ MODULE_DESCRIPTION("Atheros 803x PHY driver");
+ MODULE_AUTHOR("Matus Ujhelyi");
+@@ -308,7 +310,7 @@ static void at803x_link_change_notify(st
+ 	struct at803x_priv *priv = phydev->priv;
+ 
+ 	/*
+-	 * Conduct a hardware reset for AT8030 every time a link loss is
++	 * Conduct a hardware reset for AT8030/2 every time a link loss is
+ 	 * signalled. This is necessary to circumvent a hardware bug that
+ 	 * occurs when the cable is unplugged while TX packets are pending
+ 	 * in the FIFO. In such cases, the FIFO enters an error mode it
+@@ -414,6 +416,24 @@ static struct phy_driver at803x_driver[]
+ 	.aneg_done		= at803x_aneg_done,
+ 	.ack_interrupt		= &at803x_ack_interrupt,
+ 	.config_intr		= &at803x_config_intr,
++}, {
++	/* ATHEROS 8032 */
++	.phy_id			= ATH8032_PHY_ID,
++	.name			= "Atheros 8032 ethernet",
++	.phy_id_mask		= AT8032_PHY_ID_MASK,
++	.probe			= at803x_probe,
++	.config_init		= at803x_config_init,
++	.link_change_notify	= at803x_link_change_notify,
++	.set_wol		= at803x_set_wol,
++	.get_wol		= at803x_get_wol,
++	.suspend		= at803x_suspend,
++	.resume			= at803x_resume,
++	.features		= PHY_BASIC_FEATURES,
++	.flags			= PHY_HAS_INTERRUPT,
++	.config_aneg		= genphy_config_aneg,
++	.read_status		= genphy_read_status,
++	.ack_interrupt		= at803x_ack_interrupt,
++	.config_intr		= at803x_config_intr,
+ } };
+ 
+ module_phy_driver(at803x_driver);
+@@ -421,6 +441,7 @@ module_phy_driver(at803x_driver);
+ static struct mdio_device_id __maybe_unused atheros_tbl[] = {
+ 	{ ATH8030_PHY_ID, AT803X_PHY_ID_MASK },
+ 	{ ATH8031_PHY_ID, AT803X_PHY_ID_MASK },
++	{ ATH8032_PHY_ID, AT8032_PHY_ID_MASK },
+ 	{ ATH8035_PHY_ID, AT803X_PHY_ID_MASK },
+ 	{ }
+ };
diff --git a/target/linux/generic/pending-5.4/201-extra_optimization.patch b/target/linux/generic/pending-5.4/201-extra_optimization.patch
new file mode 100644
index 0000000000..cafccd42c9
--- /dev/null
+++ b/target/linux/generic/pending-5.4/201-extra_optimization.patch
@@ -0,0 +1,32 @@
+From: Felix Fietkau <nbd@nbd.name>
+Subject: Upgrade to Linux 2.6.19
+
+- Includes large parts of the patch from #1021 by dpalffy
+- Includes RB532 NAND driver changes by n0-1
+
+[john@phrozen.org: feix will add this to his upstream queue]
+
+lede-commit: bff468813f78f81e36ebb2a3f4354de7365e640f
+Signed-off-by: Felix Fietkau <nbd@nbd.name>
+---
+ Makefile | 6 +++---
+ 1 file changed, 3 insertions(+), 3 deletions(-)
+
+--- a/Makefile
++++ b/Makefile
+@@ -657,12 +657,12 @@ KBUILD_CFLAGS	+= $(call cc-disable-warni
+ KBUILD_CFLAGS	+= $(call cc-disable-warning, address-of-packed-member)
+ 
+ ifdef CONFIG_CC_OPTIMIZE_FOR_SIZE
+-KBUILD_CFLAGS	+= -Os $(call cc-disable-warning,maybe-uninitialized,)
++KBUILD_CFLAGS	+= -Os $(call cc-disable-warning,maybe-uninitialized,) $(EXTRA_OPTIMIZATION)
+ else
+ ifdef CONFIG_PROFILE_ALL_BRANCHES
+-KBUILD_CFLAGS	+= -O2 $(call cc-disable-warning,maybe-uninitialized,)
++KBUILD_CFLAGS	+= -O2 $(call cc-disable-warning,maybe-uninitialized,) $(EXTRA_OPTIMIZATION)
+ else
+-KBUILD_CFLAGS   += -O2
++KBUILD_CFLAGS   += -O2 -fno-reorder-blocks -fno-tree-ch $(EXTRA_OPTIMIZATION)
+ endif
+ endif
+ 
diff --git a/target/linux/generic/pending-5.4/203-kallsyms_uncompressed.patch b/target/linux/generic/pending-5.4/203-kallsyms_uncompressed.patch
new file mode 100644
index 0000000000..9230279fca
--- /dev/null
+++ b/target/linux/generic/pending-5.4/203-kallsyms_uncompressed.patch
@@ -0,0 +1,119 @@
+From: Felix Fietkau <nbd@nbd.name>
+Subject: kernel: add a config option for keeping the kallsyms table uncompressed, saving ~9kb kernel size after lzma on ar71xx
+
+[john@phrozen.org: added to my upstream queue 30.12.2016]
+lede-commit: e0e3509b5ce2ccf93d4d67ea907613f5f7ec2eed
+Signed-off-by: Felix Fietkau <nbd@nbd.name>
+---
+ init/Kconfig            | 11 +++++++++++
+ kernel/kallsyms.c       |  8 ++++++++
+ scripts/kallsyms.c      | 12 ++++++++++++
+ scripts/link-vmlinux.sh |  4 ++++
+ 4 files changed, 35 insertions(+)
+
+--- a/init/Kconfig
++++ b/init/Kconfig
+@@ -1149,6 +1149,17 @@ config SYSCTL_ARCH_UNALIGN_ALLOW
+ 	  the unaligned access emulation.
+ 	  see arch/parisc/kernel/unaligned.c for reference
+ 
++config KALLSYMS_UNCOMPRESSED
++	bool "Keep kallsyms uncompressed"
++	depends on KALLSYMS
++	help
++		Normally kallsyms contains compressed symbols (using a token table),
++		reducing the uncompressed kernel image size. Keeping the symbol table
++		uncompressed significantly improves the size of this part in compressed
++		kernel images.
++
++		Say N unless you need compressed kernel images to be small.
++
+ config HAVE_PCSPKR_PLATFORM
+ 	bool
+ 
+--- a/kernel/kallsyms.c
++++ b/kernel/kallsyms.c
+@@ -74,6 +74,11 @@ static unsigned int kallsyms_expand_symb
+ 	 * For every byte on the compressed symbol data, copy the table
+ 	 * entry for that byte.
+ 	 */
++#ifdef CONFIG_KALLSYMS_UNCOMPRESSED
++	memcpy(result, data + 1, len - 1);
++	result += len - 1;
++	len = 0;
++#endif
+ 	while (len) {
+ 		tptr = &kallsyms_token_table[kallsyms_token_index[*data]];
+ 		data++;
+@@ -106,6 +111,9 @@ tail:
+  */
+ static char kallsyms_get_symbol_type(unsigned int off)
+ {
++#ifdef CONFIG_KALLSYMS_UNCOMPRESSED
++	return kallsyms_names[off + 1];
++#endif
+ 	/*
+ 	 * Get just the first code, look it up in the token table,
+ 	 * and return the first char from this token.
+--- a/scripts/kallsyms.c
++++ b/scripts/kallsyms.c
+@@ -61,6 +61,7 @@ static struct addr_range percpu_range =
+ static struct sym_entry *table;
+ static unsigned int table_size, table_cnt;
+ static int all_symbols = 0;
++static int uncompressed = 0;
+ static int absolute_percpu = 0;
+ static int base_relative = 0;
+ 
+@@ -442,6 +443,9 @@ static void write_src(void)
+ 
+ 	free(markers);
+ 
++	if (uncompressed)
++		return;
++
+ 	output_label("kallsyms_token_table");
+ 	off = 0;
+ 	for (i = 0; i < 256; i++) {
+@@ -502,6 +506,9 @@ static void *find_token(unsigned char *s
+ {
+ 	int i;
+ 
++	if (uncompressed)
++		return NULL;
++
+ 	for (i = 0; i < len - 1; i++) {
+ 		if (str[i] == token[0] && str[i+1] == token[1])
+ 			return &str[i];
+@@ -574,6 +581,9 @@ static void optimize_result(void)
+ {
+ 	int i, best;
+ 
++	if (uncompressed)
++		return;
++
+ 	/* using the '\0' symbol last allows compress_symbols to use standard
+ 	 * fast string functions */
+ 	for (i = 255; i >= 0; i--) {
+@@ -756,6 +766,8 @@ int main(int argc, char **argv)
+ 				absolute_percpu = 1;
+ 			else if (strcmp(argv[i], "--base-relative") == 0)
+ 				base_relative = 1;
++			else if (strcmp(argv[i], "--uncompressed") == 0)
++				uncompressed = 1;
+ 			else
+ 				usage();
+ 		}
+--- a/scripts/link-vmlinux.sh
++++ b/scripts/link-vmlinux.sh
+@@ -133,6 +133,10 @@ kallsyms()
+ 		kallsymopt="${kallsymopt} --base-relative"
+ 	fi
+ 
++	if [ -n "${CONFIG_KALLSYMS_UNCOMPRESSED}" ]; then
++		kallsymopt="${kallsymopt} --uncompressed"
++	fi
++
+ 	local aflags="${KBUILD_AFLAGS} ${KBUILD_AFLAGS_KERNEL}               \
+ 		      ${NOSTDINC_FLAGS} ${LINUXINCLUDE} ${KBUILD_CPPFLAGS}"
+ 
diff --git a/target/linux/generic/pending-5.4/205-backtrace_module_info.patch b/target/linux/generic/pending-5.4/205-backtrace_module_info.patch
new file mode 100644
index 0000000000..5671173d45
--- /dev/null
+++ b/target/linux/generic/pending-5.4/205-backtrace_module_info.patch
@@ -0,0 +1,45 @@
+From: Felix Fietkau <nbd@nbd.name>
+Subject: kernel: when KALLSYMS is disabled, print module address + size for matching backtrace entries
+
+[john@phrozen.org: felix will add this to his upstream queue]
+
+lede-commit 53827cdc824556cda910b23ce5030c363b8f1461
+Signed-off-by: Felix Fietkau <nbd@nbd.name>
+---
+ lib/vsprintf.c | 15 +++++++++++----
+ 1 file changed, 11 insertions(+), 4 deletions(-)
+
+--- a/lib/vsprintf.c
++++ b/lib/vsprintf.c
+@@ -681,8 +681,10 @@ char *symbol_string(char *buf, char *end
+ 		    struct printf_spec spec, const char *fmt)
+ {
+ 	unsigned long value;
+-#ifdef CONFIG_KALLSYMS
+ 	char sym[KSYM_SYMBOL_LEN];
++#ifndef CONFIG_KALLSYMS
++	struct module *mod;
++	int len;
+ #endif
+ 
+ 	if (fmt[1] == 'R')
+@@ -696,11 +698,16 @@ char *symbol_string(char *buf, char *end
+ 		sprint_symbol(sym, value);
+ 	else
+ 		sprint_symbol_no_offset(sym, value);
+-
+-	return string(buf, end, sym, spec);
+ #else
+-	return special_hex_number(buf, end, value, sizeof(void *));
++	len = snprintf(sym, sizeof(sym), "0x%lx", value);
++
++	mod = __module_address(value);
++	if (mod)
++		snprintf(sym + len, sizeof(sym) - len, " [%s@%p+0x%x]",
++			 mod->name, mod->core_layout.base,
++			 mod->core_layout.size);
+ #endif
++	return string(buf, end, sym, spec);
+ }
+ 
+ static const struct printf_spec default_str_spec = {
diff --git a/target/linux/generic/pending-5.4/220-optimize_inlining.patch b/target/linux/generic/pending-5.4/220-optimize_inlining.patch
new file mode 100644
index 0000000000..ae032709d2
--- /dev/null
+++ b/target/linux/generic/pending-5.4/220-optimize_inlining.patch
@@ -0,0 +1,225 @@
+--- a/arch/arm/kernel/atags.h
++++ b/arch/arm/kernel/atags.h
+@@ -5,7 +5,7 @@ void convert_to_tag_list(struct tag *tag
+ const struct machine_desc *setup_machine_tags(phys_addr_t __atags_pointer,
+ 	unsigned int machine_nr);
+ #else
+-static inline const struct machine_desc *
++static inline const struct machine_desc * __init __noreturn
+ setup_machine_tags(phys_addr_t __atags_pointer, unsigned int machine_nr)
+ {
+ 	early_print("no ATAGS support: can't continue\n");
+--- a/arch/arm64/include/asm/cpufeature.h
++++ b/arch/arm64/include/asm/cpufeature.h
+@@ -366,7 +366,7 @@ static inline bool cpu_have_feature(unsi
+ }
+ 
+ /* System capability check for constant caps */
+-static inline bool __cpus_have_const_cap(int num)
++static __always_inline bool __cpus_have_const_cap(int num)
+ {
+ 	if (num >= ARM64_NCAPS)
+ 		return false;
+@@ -380,7 +380,7 @@ static inline bool cpus_have_cap(unsigne
+ 	return test_bit(num, cpu_hwcaps);
+ }
+ 
+-static inline bool cpus_have_const_cap(int num)
++static __always_inline bool cpus_have_const_cap(int num)
+ {
+ 	if (static_branch_likely(&arm64_const_caps_ready))
+ 		return __cpus_have_const_cap(num);
+--- a/arch/mips/include/asm/bitops.h
++++ b/arch/mips/include/asm/bitops.h
+@@ -463,7 +463,7 @@ static inline void __clear_bit_unlock(un
+  * Return the bit position (0..63) of the most significant 1 bit in a word
+  * Returns -1 if no 1 bit exists
+  */
+-static inline unsigned long __fls(unsigned long word)
++static __always_inline unsigned long __fls(unsigned long word)
+ {
+ 	int num;
+ 
+@@ -529,7 +529,7 @@ static inline unsigned long __fls(unsign
+  * Returns 0..SZLONG-1
+  * Undefined if no bit exists, so code should check against 0 first.
+  */
+-static inline unsigned long __ffs(unsigned long word)
++static __always_inline unsigned long __ffs(unsigned long word)
+ {
+ 	return __fls(word & -word);
+ }
+--- a/arch/mips/kernel/cpu-bugs64.c
++++ b/arch/mips/kernel/cpu-bugs64.c
+@@ -42,8 +42,8 @@ static inline void align_mod(const int a
+ 		: GCC_IMM_ASM() (align), GCC_IMM_ASM() (mod));
+ }
+ 
+-static inline void mult_sh_align_mod(long *v1, long *v2, long *w,
+-				     const int align, const int mod)
++static __always_inline void mult_sh_align_mod(long *v1, long *v2, long *w,
++					      const int align, const int mod)
+ {
+ 	unsigned long flags;
+ 	int m1, m2;
+--- a/arch/powerpc/kernel/prom_init.c
++++ b/arch/powerpc/kernel/prom_init.c
+@@ -498,14 +498,14 @@ static int __init prom_next_node(phandle
+ 	}
+ }
+ 
+-static inline int prom_getprop(phandle node, const char *pname,
+-			       void *value, size_t valuelen)
++static inline int __init prom_getprop(phandle node, const char *pname,
++				      void *value, size_t valuelen)
+ {
+ 	return call_prom("getprop", 4, 1, node, ADDR(pname),
+ 			 (u32)(unsigned long) value, (u32) valuelen);
+ }
+ 
+-static inline int prom_getproplen(phandle node, const char *pname)
++static inline int __init prom_getproplen(phandle node, const char *pname)
+ {
+ 	return call_prom("getproplen", 2, 1, node, ADDR(pname));
+ }
+--- a/arch/powerpc/mm/tlb-radix.c
++++ b/arch/powerpc/mm/tlb-radix.c
+@@ -90,8 +90,8 @@ void radix__tlbiel_all(unsigned int acti
+ 	asm volatile(PPC_INVALIDATE_ERAT "; isync" : : :"memory");
+ }
+ 
+-static inline void __tlbiel_pid(unsigned long pid, int set,
+-				unsigned long ric)
++static __always_inline void __tlbiel_pid(unsigned long pid, int set,
++					 unsigned long ric)
+ {
+ 	unsigned long rb,rs,prs,r;
+ 
+@@ -106,7 +106,7 @@ static inline void __tlbiel_pid(unsigned
+ 	trace_tlbie(0, 1, rb, rs, ric, prs, r);
+ }
+ 
+-static inline void __tlbie_pid(unsigned long pid, unsigned long ric)
++static __always_inline void __tlbie_pid(unsigned long pid, unsigned long ric)
+ {
+ 	unsigned long rb,rs,prs,r;
+ 
+@@ -136,7 +136,7 @@ static inline void __tlbiel_lpid(unsigne
+ 	trace_tlbie(lpid, 1, rb, rs, ric, prs, r);
+ }
+ 
+-static inline void __tlbie_lpid(unsigned long lpid, unsigned long ric)
++static __always_inline void __tlbie_lpid(unsigned long lpid, unsigned long ric)
+ {
+ 	unsigned long rb,rs,prs,r;
+ 
+@@ -300,7 +300,7 @@ static inline void fixup_tlbie_lpid(unsi
+ /*
+  * We use 128 set in radix mode and 256 set in hpt mode.
+  */
+-static inline void _tlbiel_pid(unsigned long pid, unsigned long ric)
++static __always_inline void _tlbiel_pid(unsigned long pid, unsigned long ric)
+ {
+ 	int set;
+ 
+@@ -983,7 +983,7 @@ void radix__tlb_flush(struct mmu_gather
+ 	tlb->need_flush_all = 0;
+ }
+ 
+-static inline void __radix__flush_tlb_range_psize(struct mm_struct *mm,
++static __always_inline void __radix__flush_tlb_range_psize(struct mm_struct *mm,
+ 				unsigned long start, unsigned long end,
+ 				int psize, bool also_pwc)
+ {
+--- a/arch/s390/include/asm/cpacf.h
++++ b/arch/s390/include/asm/cpacf.h
+@@ -202,7 +202,7 @@ static inline int __cpacf_check_opcode(u
+ 	}
+ }
+ 
+-static inline int cpacf_query(unsigned int opcode, cpacf_mask_t *mask)
++static __always_inline int cpacf_query(unsigned int opcode, cpacf_mask_t *mask)
+ {
+ 	if (__cpacf_check_opcode(opcode)) {
+ 		__cpacf_query(opcode, mask);
+--- a/arch/x86/Kconfig.debug
++++ b/arch/x86/Kconfig.debug
+@@ -276,20 +276,6 @@ config CPA_DEBUG
+ 	---help---
+ 	  Do change_page_attr() self-tests every 30 seconds.
+ 
+-config OPTIMIZE_INLINING
+-	bool "Allow gcc to uninline functions marked 'inline'"
+-	---help---
+-	  This option determines if the kernel forces gcc to inline the functions
+-	  developers have marked 'inline'. Doing so takes away freedom from gcc to
+-	  do what it thinks is best, which is desirable for the gcc 3.x series of
+-	  compilers. The gcc 4.x series have a rewritten inlining algorithm and
+-	  enabling this option will generate a smaller kernel there. Hopefully
+-	  this algorithm is so good that allowing gcc 4.x and above to make the
+-	  decision will become the default in the future. Until then this option
+-	  is there to test gcc for this.
+-
+-	  If unsure, say N.
+-
+ config DEBUG_ENTRY
+ 	bool "Debug low-level entry code"
+ 	depends on DEBUG_KERNEL
+--- a/drivers/mtd/nand/raw/vf610_nfc.c
++++ b/drivers/mtd/nand/raw/vf610_nfc.c
+@@ -373,7 +373,7 @@ static int vf610_nfc_cmd(struct nand_chi
+ {
+ 	const struct nand_op_instr *instr;
+ 	struct vf610_nfc *nfc = chip_to_nfc(chip);
+-	int op_id = -1, trfr_sz = 0, offset;
++	int op_id = -1, trfr_sz = 0, offset = 0;
+ 	u32 col = 0, row = 0, cmd1 = 0, cmd2 = 0, code = 0;
+ 	bool force8bit = false;
+ 
+--- a/lib/Kconfig.debug
++++ b/lib/Kconfig.debug
+@@ -309,6 +309,20 @@ config HEADERS_CHECK
+ 	  exported to $(INSTALL_HDR_PATH) (usually 'usr/include' in
+ 	  your build tree), to make sure they're suitable.
+ 
++config OPTIMIZE_INLINING
++	bool "Allow compiler to uninline functions marked 'inline'"
++	help
++	  This option determines if the kernel forces gcc to inline the functions
++	  developers have marked 'inline'. Doing so takes away freedom from gcc to
++	  do what it thinks is best, which is desirable for the gcc 3.x series of
++	  compilers. The gcc 4.x series have a rewritten inlining algorithm and
++	  enabling this option will generate a smaller kernel there. Hopefully
++	  this algorithm is so good that allowing gcc 4.x and above to make the
++	  decision will become the default in the future. Until then this option
++	  is there to test gcc for this.
++
++	  If unsure, say N.
++
+ config DEBUG_SECTION_MISMATCH
+ 	bool "Enable full Section mismatch analysis"
+ 	help
+--- a/arch/x86/Kconfig
++++ b/arch/x86/Kconfig
+@@ -306,9 +306,6 @@ config ZONE_DMA32
+ config AUDIT_ARCH
+ 	def_bool y if X86_64
+ 
+-config ARCH_SUPPORTS_OPTIMIZED_INLINING
+-	def_bool y
+-
+ config ARCH_SUPPORTS_DEBUG_PAGEALLOC
+ 	def_bool y
+ 
+--- a/include/linux/compiler_types.h
++++ b/include/linux/compiler_types.h
+@@ -268,8 +268,7 @@ struct ftrace_likely_data {
+  * of extern inline functions at link time.
+  * A lot of inline functions can cause havoc with function tracing.
+  */
+-#if !defined(CONFIG_ARCH_SUPPORTS_OPTIMIZED_INLINING) || \
+-	!defined(CONFIG_OPTIMIZE_INLINING)
++#if !defined(CONFIG_OPTIMIZE_INLINING)
+ #define inline \
+ 	inline __attribute__((always_inline, unused)) notrace __gnu_inline
+ #else
diff --git a/target/linux/generic/pending-5.4/240-remove-unsane-filenames-from-deps_initramfs-list.patch b/target/linux/generic/pending-5.4/240-remove-unsane-filenames-from-deps_initramfs-list.patch
new file mode 100644
index 0000000000..c0dfe49c9b
--- /dev/null
+++ b/target/linux/generic/pending-5.4/240-remove-unsane-filenames-from-deps_initramfs-list.patch
@@ -0,0 +1,46 @@
+From: Gabor Juhos <juhosg@openwrt.org>
+Subject: usr: sanitize deps_initramfs list
+
+If any filename in the intramfs dependency
+list contains a colon, that causes a kernel
+build error like this:
+
+/devel/openwrt/build_dir/linux-ar71xx_generic/linux-3.6.6/usr/Makefile:58: *** multiple target patterns.  Stop.
+make[5]: *** [usr] Error 2
+
+Fix it by removing such filenames from the
+deps_initramfs list.
+
+Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
+---
+ usr/Makefile | 8 +++++---
+ 1 file changed, 5 insertions(+), 3 deletions(-)
+
+--- a/usr/Makefile
++++ b/usr/Makefile
+@@ -42,20 +42,22 @@ ifneq ($(wildcard $(obj)/$(datafile_d_y)
+ 	include $(obj)/$(datafile_d_y)
+ endif
+ 
++deps_initramfs_sane := $(foreach v,$(deps_initramfs),$(if $(findstring :,$(v)),,$(v)))
++
+ quiet_cmd_initfs = GEN     $@
+       cmd_initfs = $(initramfs) -o $@ $(ramfs-args) $(ramfs-input)
+ 
+ targets := $(datafile_y)
+ 
+ # do not try to update files included in initramfs
+-$(deps_initramfs): ;
++$(deps_initramfs_sane): ;
+ 
+-$(deps_initramfs): klibcdirs
++$(deps_initramfs_sane): klibcdirs
+ # We rebuild initramfs_data.cpio if:
+ # 1) Any included file is newer then initramfs_data.cpio
+ # 2) There are changes in which files are included (added or deleted)
+ # 3) If gen_init_cpio are newer than initramfs_data.cpio
+ # 4) arguments to gen_initramfs.sh changes
+-$(obj)/$(datafile_y): $(obj)/gen_init_cpio $(deps_initramfs) klibcdirs
++$(obj)/$(datafile_y): $(obj)/gen_init_cpio $(deps_initramfs_sane) klibcdirs
+ 	$(Q)$(initramfs) -l $(ramfs-input) > $(obj)/$(datafile_d_y)
+ 	$(call if_changed,initfs)
diff --git a/target/linux/generic/pending-5.4/261-enable_wilink_platform_without_drivers.patch b/target/linux/generic/pending-5.4/261-enable_wilink_platform_without_drivers.patch
new file mode 100644
index 0000000000..9955ab3c0b
--- /dev/null
+++ b/target/linux/generic/pending-5.4/261-enable_wilink_platform_without_drivers.patch
@@ -0,0 +1,20 @@
+From: Imre Kaloz <kaloz@openwrt.org>
+Subject: [PATCH] hack: net: wireless: make the wl12xx glue code available with
+ compat-wireless, too
+
+Signed-off-by: Imre Kaloz <kaloz@openwrt.org>
+---
+ drivers/net/wireless/ti/Kconfig | 2 +-
+ 1 file changed, 1 insertion(+), 1 deletion(-)
+
+--- a/drivers/net/wireless/ti/Kconfig
++++ b/drivers/net/wireless/ti/Kconfig
+@@ -19,7 +19,7 @@ source "drivers/net/wireless/ti/wlcore/K
+ 
+ config WILINK_PLATFORM_DATA
+ 	bool "TI WiLink platform data"
+-	depends on WLCORE_SDIO || WL1251_SDIO
++	depends on WLCORE_SDIO || WL1251_SDIO || ARCH_OMAP2PLUS
+ 	default y
+ 	---help---
+ 	Small platform data bit needed to pass data to the sdio modules.
diff --git a/target/linux/generic/pending-5.4/300-mips_expose_boot_raw.patch b/target/linux/generic/pending-5.4/300-mips_expose_boot_raw.patch
new file mode 100644
index 0000000000..e19cec1400
--- /dev/null
+++ b/target/linux/generic/pending-5.4/300-mips_expose_boot_raw.patch
@@ -0,0 +1,40 @@
+From: Mark Miller <mark@mirell.org>
+Subject: mips: expose CONFIG_BOOT_RAW
+
+This exposes the CONFIG_BOOT_RAW symbol in Kconfig. This is needed on
+certain Broadcom chipsets running CFE in order to load the kernel.
+
+Signed-off-by: Mark Miller <mark@mirell.org>
+Acked-by: Rob Landley <rob@landley.net>
+---
+--- a/arch/mips/Kconfig
++++ b/arch/mips/Kconfig
+@@ -1063,9 +1063,6 @@ config FW_ARC
+ config ARCH_MAY_HAVE_PC_FDC
+ 	bool
+ 
+-config BOOT_RAW
+-	bool
+-
+ config CEVT_BCM1480
+ 	bool
+ 
+@@ -2969,6 +2966,18 @@ choice
+ 		bool "Extend builtin kernel arguments with bootloader arguments"
+ endchoice
+ 
++config BOOT_RAW
++	bool "Enable the kernel to be executed from the load address"
++	default n
++	help
++	 Allow the kernel to be executed from the load address for
++	 bootloaders which cannot read the ELF format. This places
++	 a jump to start_kernel at the load address.
++
++	 If unsure, say N.
++
++
++
+ endmenu
+ 
+ config LOCKDEP_SUPPORT
diff --git a/target/linux/generic/pending-5.4/302-mips_no_branch_likely.patch b/target/linux/generic/pending-5.4/302-mips_no_branch_likely.patch
new file mode 100644
index 0000000000..6192c417d3
--- /dev/null
+++ b/target/linux/generic/pending-5.4/302-mips_no_branch_likely.patch
@@ -0,0 +1,22 @@
+From: Felix Fietkau <nbd@nbd.name>
+Subject: mips: use -mno-branch-likely for kernel and userspace
+
+saves ~11k kernel size after lzma and ~12k squashfs size in the
+
+lede-commit: 41a039f46450ffae9483d6216422098669da2900
+Signed-off-by: Felix Fietkau <nbd@nbd.name>
+---
+ arch/mips/Makefile | 2 +-
+ 1 file changed, 1 insertion(+), 1 deletion(-)
+
+--- a/arch/mips/Makefile
++++ b/arch/mips/Makefile
+@@ -91,7 +91,7 @@ all-$(CONFIG_SYS_SUPPORTS_ZBOOT)+= vmlin
+ # machines may also.  Since BFD is incredibly buggy with respect to
+ # crossformat linking we rely on the elf2ecoff tool for format conversion.
+ #
+-cflags-y			+= -G 0 -mno-abicalls -fno-pic -pipe
++cflags-y			+= -G 0 -mno-abicalls -fno-pic -pipe -mno-branch-likely
+ cflags-y			+= -msoft-float
+ LDFLAGS_vmlinux			+= -G 0 -static -n -nostdlib
+ KBUILD_AFLAGS_MODULE		+= -mlong-calls
diff --git a/target/linux/generic/pending-5.4/304-mips_disable_fpu.patch b/target/linux/generic/pending-5.4/304-mips_disable_fpu.patch
new file mode 100644
index 0000000000..332bb71e22
--- /dev/null
+++ b/target/linux/generic/pending-5.4/304-mips_disable_fpu.patch
@@ -0,0 +1,137 @@
+From:   Manuel Lauss <manuel.lauss@gmail.com>
+Subject: [RFC PATCH v4 2/2] MIPS: make FPU emulator optional
+
+This small patch makes the MIPS FPU emulator optional. The kernel
+kills float-users on systems without a hardware FPU by sending a SIGILL.
+
+Disabling the emulator shrinks vmlinux by about 54kBytes (32bit,
+optimizing for size).
+
+Signed-off-by: Manuel Lauss <manuel.lauss@gmail.com>
+---
+v4: rediffed because of patch 1/2, should now work with micromips as well
+v3: updated patch description with size savings.
+v2: incorporated changes suggested by Jonas Gorski
+    force the fpu emulator on for micromips: relocating the parts
+    of the mmips code in the emulator to other areas would be a
+    much larger change; I went the cheap route instead with this.
+
+ arch/mips/Kbuild                     |  2 +-
+ arch/mips/Kconfig                    | 14 ++++++++++++++
+ arch/mips/include/asm/fpu.h          |  5 +++--
+ arch/mips/include/asm/fpu_emulator.h | 15 +++++++++++++++
+ 4 files changed, 33 insertions(+), 3 deletions(-)
+
+--- a/arch/mips/Kconfig
++++ b/arch/mips/Kconfig
+@@ -2893,6 +2893,20 @@ config MIPS_O32_FP64_SUPPORT
+ 
+ 	  If unsure, say N.
+ 
++config MIPS_FPU_EMULATOR
++	bool "MIPS FPU Emulator"
++	default y
++	help
++	  This option lets you disable the built-in MIPS FPU (Coprocessor 1)
++	  emulator, which handles floating-point instructions on processors
++	  without a hardware FPU.  It is generally a good idea to keep the
++	  emulator built-in, unless you are perfectly sure you have a
++	  complete soft-float environment.  With the emulator disabled, all
++	  users of float operations will be killed with an illegal instr-
++	  uction exception.
++
++	  Say Y, please.
++
+ config USE_OF
+ 	bool
+ 	select OF
+--- a/arch/mips/Makefile
++++ b/arch/mips/Makefile
+@@ -323,7 +323,7 @@ OBJCOPYFLAGS		+= --remove-section=.regin
+ head-y := arch/mips/kernel/head.o
+ 
+ libs-y			+= arch/mips/lib/
+-libs-y			+= arch/mips/math-emu/
++libs-$(CONFIG_MIPS_FPU_EMULATOR)	+= arch/mips/math-emu/
+ 
+ # See arch/mips/Kbuild for content of core part of the kernel
+ core-y += arch/mips/
+--- a/arch/mips/include/asm/fpu.h
++++ b/arch/mips/include/asm/fpu.h
+@@ -230,8 +230,10 @@ static inline int init_fpu(void)
+ 		/* Restore FRE */
+ 		write_c0_config5(config5);
+ 		enable_fpu_hazard();
+-	} else
++	} else if (IS_ENABLED(CONFIG_MIPS_FPU_EMULATOR))
+ 		fpu_emulator_init_fpu();
++	else
++		ret = SIGILL;
+ 
+ 	return ret;
+ }
+--- a/arch/mips/include/asm/fpu_emulator.h
++++ b/arch/mips/include/asm/fpu_emulator.h
+@@ -30,6 +30,7 @@
+ #include <asm/local.h>
+ #include <asm/processor.h>
+ 
++#ifdef CONFIG_MIPS_FPU_EMULATOR
+ #ifdef CONFIG_DEBUG_FS
+ 
+ struct mips_fpu_emulator_stats {
+@@ -179,6 +180,16 @@ do {									\
+ extern int fpu_emulator_cop1Handler(struct pt_regs *xcp,
+ 				    struct mips_fpu_struct *ctx, int has_fpu,
+ 				    void __user **fault_addr);
++#else	/* no CONFIG_MIPS_FPU_EMULATOR */
++static inline int fpu_emulator_cop1Handler(struct pt_regs *xcp,
++				struct mips_fpu_struct *ctx, int has_fpu,
++				void __user **fault_addr)
++{
++	*fault_addr = NULL;
++	return SIGILL;	/* we don't speak MIPS FPU */
++}
++#endif	/* CONFIG_MIPS_FPU_EMULATOR */
++
+ void force_fcr31_sig(unsigned long fcr31, void __user *fault_addr,
+ 		     struct task_struct *tsk);
+ int process_fpemu_return(int sig, void __user *fault_addr,
+--- a/arch/mips/include/asm/dsemul.h
++++ b/arch/mips/include/asm/dsemul.h
+@@ -41,6 +41,7 @@ struct task_struct;
+ extern int mips_dsemul(struct pt_regs *regs, mips_instruction ir,
+ 		       unsigned long branch_pc, unsigned long cont_pc);
+ 
++#ifdef CONFIG_MIPS_FPU_EMULATOR
+ /**
+  * do_dsemulret() - Return from a delay slot 'emulation' frame
+  * @xcp:	User thread register context.
+@@ -88,5 +89,27 @@ extern bool dsemul_thread_rollback(struc
+  * before @mm is freed in order to avoid memory leaks.
+  */
+ extern void dsemul_mm_cleanup(struct mm_struct *mm);
++#else
++static inline bool do_dsemulret(struct pt_regs *xcp)
++{
++	return false;
++}
++
++static inline bool dsemul_thread_cleanup(struct task_struct *tsk)
++{
++	return false;
++}
++
++static inline bool dsemul_thread_rollback(struct pt_regs *regs)
++{
++	return false;
++}
++
++static inline void dsemul_mm_cleanup(struct mm_struct *mm)
++{
++
++}
++
++#endif
+ 
+ #endif /* __MIPS_ASM_DSEMUL_H__ */
diff --git a/target/linux/generic/pending-5.4/305-mips_module_reloc.patch b/target/linux/generic/pending-5.4/305-mips_module_reloc.patch
new file mode 100644
index 0000000000..a8e4e78c91
--- /dev/null
+++ b/target/linux/generic/pending-5.4/305-mips_module_reloc.patch
@@ -0,0 +1,371 @@
+From: Felix Fietkau <nbd@nbd.name>
+Subject: mips: replace -mlong-calls with -mno-long-calls to make function calls faster in kernel modules to achieve this, try to
+
+lede-commit: 3b3d64743ba2a874df9d70cd19e242205b0a788c
+Signed-off-by: Felix Fietkau <nbd@nbd.name>
+---
+ arch/mips/Makefile             |   5 +
+ arch/mips/include/asm/module.h |   5 +
+ arch/mips/kernel/module.c      | 279 ++++++++++++++++++++++++++++++++++++++++-
+ 3 files changed, 284 insertions(+), 5 deletions(-)
+
+--- a/arch/mips/Makefile
++++ b/arch/mips/Makefile
+@@ -94,8 +94,18 @@ all-$(CONFIG_SYS_SUPPORTS_ZBOOT)+= vmlin
+ cflags-y			+= -G 0 -mno-abicalls -fno-pic -pipe -mno-branch-likely
+ cflags-y			+= -msoft-float
+ LDFLAGS_vmlinux			+= -G 0 -static -n -nostdlib
++ifdef CONFIG_64BIT
+ KBUILD_AFLAGS_MODULE		+= -mlong-calls
+ KBUILD_CFLAGS_MODULE		+= -mlong-calls
++else
++  ifdef CONFIG_DYNAMIC_FTRACE
++    KBUILD_AFLAGS_MODULE	+= -mlong-calls
++    KBUILD_CFLAGS_MODULE	+= -mlong-calls
++  else
++    KBUILD_AFLAGS_MODULE	+= -mno-long-calls
++    KBUILD_CFLAGS_MODULE	+= -mno-long-calls
++  endif
++endif
+ 
+ ifeq ($(CONFIG_RELOCATABLE),y)
+ LDFLAGS_vmlinux			+= --emit-relocs
+--- a/arch/mips/include/asm/module.h
++++ b/arch/mips/include/asm/module.h
+@@ -12,6 +12,11 @@ struct mod_arch_specific {
+ 	const struct exception_table_entry *dbe_start;
+ 	const struct exception_table_entry *dbe_end;
+ 	struct mips_hi16 *r_mips_hi16_list;
++
++	void *phys_plt_tbl;
++	void *virt_plt_tbl;
++	unsigned int phys_plt_offset;
++	unsigned int virt_plt_offset;
+ };
+ 
+ typedef uint8_t Elf64_Byte;		/* Type for a 8-bit quantity.  */
+--- a/arch/mips/kernel/module.c
++++ b/arch/mips/kernel/module.c
+@@ -44,14 +44,221 @@ struct mips_hi16 {
+ static LIST_HEAD(dbe_list);
+ static DEFINE_SPINLOCK(dbe_lock);
+ 
+-#ifdef MODULE_START
++/*
++ * Get the potential max trampolines size required of the init and
++ * non-init sections. Only used if we cannot find enough contiguous
++ * physically mapped memory to put the module into.
++ */
++static unsigned int
++get_plt_size(const Elf_Ehdr *hdr, const Elf_Shdr *sechdrs,
++             const char *secstrings, unsigned int symindex, bool is_init)
++{
++	unsigned long ret = 0;
++	unsigned int i, j;
++	Elf_Sym *syms;
++
++	/* Everything marked ALLOC (this includes the exported symbols) */
++	for (i = 1; i < hdr->e_shnum; ++i) {
++		unsigned int info = sechdrs[i].sh_info;
++
++		if (sechdrs[i].sh_type != SHT_REL
++		    && sechdrs[i].sh_type != SHT_RELA)
++			continue;
++
++		/* Not a valid relocation section? */
++		if (info >= hdr->e_shnum)
++			continue;
++
++		/* Don't bother with non-allocated sections */
++		if (!(sechdrs[info].sh_flags & SHF_ALLOC))
++			continue;
++
++		/* If it's called *.init*, and we're not init, we're
++                   not interested */
++		if ((strstr(secstrings + sechdrs[i].sh_name, ".init") != 0)
++		    != is_init)
++			continue;
++
++		syms = (Elf_Sym *) sechdrs[symindex].sh_addr;
++		if (sechdrs[i].sh_type == SHT_REL) {
++			Elf_Mips_Rel *rel = (void *) sechdrs[i].sh_addr;
++			unsigned int size = sechdrs[i].sh_size / sizeof(*rel);
++
++			for (j = 0; j < size; ++j) {
++				Elf_Sym *sym;
++
++				if (ELF_MIPS_R_TYPE(rel[j]) != R_MIPS_26)
++					continue;
++
++				sym = syms + ELF_MIPS_R_SYM(rel[j]);
++				if (!is_init && sym->st_shndx != SHN_UNDEF)
++					continue;
++
++				ret += 4 * sizeof(int);
++			}
++		} else {
++			Elf_Mips_Rela *rela = (void *) sechdrs[i].sh_addr;
++			unsigned int size = sechdrs[i].sh_size / sizeof(*rela);
++
++			for (j = 0; j < size; ++j) {
++				Elf_Sym *sym;
++
++				if (ELF_MIPS_R_TYPE(rela[j]) != R_MIPS_26)
++					continue;
++
++				sym = syms + ELF_MIPS_R_SYM(rela[j]);
++				if (!is_init && sym->st_shndx != SHN_UNDEF)
++					continue;
++
++				ret += 4 * sizeof(int);
++			}
++		}
++	}
++
++	return ret;
++}
++
++#ifndef MODULE_START
++static void *alloc_phys(unsigned long size)
++{
++	unsigned order;
++	struct page *page;
++	struct page *p;
++
++	size = PAGE_ALIGN(size);
++	order = get_order(size);
++
++	page = alloc_pages(GFP_KERNEL | __GFP_NORETRY | __GFP_NOWARN |
++			__GFP_THISNODE, order);
++	if (!page)
++		return NULL;
++
++	split_page(page, order);
++
++	/* mark all pages except for the last one */
++	for (p = page; p + 1 < page + (size >> PAGE_SHIFT); ++p)
++		set_bit(PG_owner_priv_1, &p->flags);
++
++	for (p = page + (size >> PAGE_SHIFT); p < page + (1 << order); ++p)
++		__free_page(p);
++
++	return page_address(page);
++}
++#endif
++
++static void free_phys(void *ptr)
++{
++	struct page *page;
++	bool free;
++
++	page = virt_to_page(ptr);
++	do {
++		free = test_and_clear_bit(PG_owner_priv_1, &page->flags);
++		__free_page(page);
++		page++;
++	} while (free);
++}
++
++
+ void *module_alloc(unsigned long size)
+ {
++#ifdef MODULE_START
+ 	return __vmalloc_node_range(size, 1, MODULE_START, MODULE_END,
+ 				GFP_KERNEL, PAGE_KERNEL, 0, NUMA_NO_NODE,
+ 				__builtin_return_address(0));
++#else
++	void *ptr;
++
++	if (size == 0)
++		return NULL;
++
++	ptr = alloc_phys(size);
++
++	/* If we failed to allocate physically contiguous memory,
++	 * fall back to regular vmalloc. The module loader code will
++	 * create jump tables to handle long jumps */
++	if (!ptr)
++		return vmalloc(size);
++
++	return ptr;
++#endif
+ }
++
++static inline bool is_phys_addr(void *ptr)
++{
++#ifdef CONFIG_64BIT
++	return (KSEGX((unsigned long)ptr) == CKSEG0);
++#else
++	return (KSEGX(ptr) == KSEG0);
+ #endif
++}
++
++/* Free memory returned from module_alloc */
++void module_memfree(void *module_region)
++{
++	if (is_phys_addr(module_region))
++		free_phys(module_region);
++	else
++		vfree(module_region);
++}
++
++static void *__module_alloc(int size, bool phys)
++{
++	void *ptr;
++
++	if (phys)
++		ptr = kmalloc(size, GFP_KERNEL);
++	else
++		ptr = vmalloc(size);
++	return ptr;
++}
++
++static void __module_free(void *ptr)
++{
++	if (is_phys_addr(ptr))
++		kfree(ptr);
++	else
++		vfree(ptr);
++}
++
++int module_frob_arch_sections(Elf_Ehdr *hdr, Elf_Shdr *sechdrs,
++			      char *secstrings, struct module *mod)
++{
++	unsigned int symindex = 0;
++	unsigned int core_size, init_size;
++	int i;
++
++	mod->arch.phys_plt_offset = 0;
++	mod->arch.virt_plt_offset = 0;
++	mod->arch.phys_plt_tbl = NULL;
++	mod->arch.virt_plt_tbl = NULL;
++
++	if (IS_ENABLED(CONFIG_64BIT))
++		return 0;
++
++	for (i = 1; i < hdr->e_shnum; i++)
++		if (sechdrs[i].sh_type == SHT_SYMTAB)
++			symindex = i;
++
++	core_size = get_plt_size(hdr, sechdrs, secstrings, symindex, false);
++	init_size = get_plt_size(hdr, sechdrs, secstrings, symindex, true);
++
++	if ((core_size + init_size) == 0)
++		return 0;
++
++	mod->arch.phys_plt_tbl = __module_alloc(core_size + init_size, 1);
++	if (!mod->arch.phys_plt_tbl)
++		return -ENOMEM;
++
++	mod->arch.virt_plt_tbl = __module_alloc(core_size + init_size, 0);
++	if (!mod->arch.virt_plt_tbl) {
++		__module_free(mod->arch.phys_plt_tbl);
++		mod->arch.phys_plt_tbl = NULL;
++		return -ENOMEM;
++	}
++
++	return 0;
++}
+ 
+ static int apply_r_mips_none(struct module *me, u32 *location,
+ 			     u32 base, Elf_Addr v, bool rela)
+@@ -67,9 +274,40 @@ static int apply_r_mips_32(struct module
+ 	return 0;
+ }
+ 
++static Elf_Addr add_plt_entry_to(unsigned *plt_offset,
++				 void *start, Elf_Addr v)
++{
++	unsigned *tramp = start + *plt_offset;
++	*plt_offset += 4 * sizeof(int);
++
++	/* adjust carry for addiu */
++	if (v & 0x00008000)
++		v += 0x10000;
++
++	tramp[0] = 0x3c190000 | (v >> 16);      /* lui t9, hi16 */
++	tramp[1] = 0x27390000 | (v & 0xffff);   /* addiu t9, t9, lo16 */
++	tramp[2] = 0x03200008;                  /* jr t9 */
++	tramp[3] = 0x00000000;                  /* nop */
++
++	return (Elf_Addr) tramp;
++}
++
++static Elf_Addr add_plt_entry(struct module *me, void *location, Elf_Addr v)
++{
++	if (is_phys_addr(location))
++		return add_plt_entry_to(&me->arch.phys_plt_offset,
++				me->arch.phys_plt_tbl, v);
++	else
++		return add_plt_entry_to(&me->arch.virt_plt_offset,
++				me->arch.virt_plt_tbl, v);
++
++}
++
+ static int apply_r_mips_26(struct module *me, u32 *location,
+ 			   u32 base, Elf_Addr v, bool rela)
+ {
++	u32 ofs = base & 0x03ffffff;
++
+ 	if (v % 4) {
+ 		pr_err("module %s: dangerous R_MIPS_26 relocation\n",
+ 		       me->name);
+@@ -77,13 +315,17 @@ static int apply_r_mips_26(struct module
+ 	}
+ 
+ 	if ((v & 0xf0000000) != (((unsigned long)location + 4) & 0xf0000000)) {
+-		pr_err("module %s: relocation overflow\n",
+-		       me->name);
+-		return -ENOEXEC;
++		v = add_plt_entry(me, location, v + (ofs << 2));
++		if (!v) {
++			pr_err("module %s: relocation overflow\n",
++			       me->name);
++			return -ENOEXEC;
++		}
++		ofs = 0;
+ 	}
+ 
+ 	*location = (*location & ~0x03ffffff) |
+-		    ((base + (v >> 2)) & 0x03ffffff);
++		    ((ofs + (v >> 2)) & 0x03ffffff);
+ 
+ 	return 0;
+ }
+@@ -459,9 +701,36 @@ int module_finalize(const Elf_Ehdr *hdr,
+ 		list_add(&me->arch.dbe_list, &dbe_list);
+ 		spin_unlock_irq(&dbe_lock);
+ 	}
++
++	/* Get rid of the fixup trampoline if we're running the module
++	 * from physically mapped address space */
++	if (me->arch.phys_plt_offset == 0) {
++		__module_free(me->arch.phys_plt_tbl);
++		me->arch.phys_plt_tbl = NULL;
++	}
++	if (me->arch.virt_plt_offset == 0) {
++		__module_free(me->arch.virt_plt_tbl);
++		me->arch.virt_plt_tbl = NULL;
++	}
++
+ 	return 0;
+ }
+ 
++void module_arch_freeing_init(struct module *mod)
++{
++	if (mod->state == MODULE_STATE_LIVE)
++		return;
++
++	if (mod->arch.phys_plt_tbl) {
++		__module_free(mod->arch.phys_plt_tbl);
++		mod->arch.phys_plt_tbl = NULL;
++	}
++	if (mod->arch.virt_plt_tbl) {
++		__module_free(mod->arch.virt_plt_tbl);
++		mod->arch.virt_plt_tbl = NULL;
++	}
++}
++
+ void module_arch_cleanup(struct module *mod)
+ {
+ 	spin_lock_irq(&dbe_lock);
diff --git a/target/linux/generic/pending-5.4/306-mips_mem_functions_performance.patch b/target/linux/generic/pending-5.4/306-mips_mem_functions_performance.patch
new file mode 100644
index 0000000000..e73cfd61b3
--- /dev/null
+++ b/target/linux/generic/pending-5.4/306-mips_mem_functions_performance.patch
@@ -0,0 +1,106 @@
+From: Felix Fietkau <nbd@nbd.name>
+Subject: [PATCH] mips: allow the compiler to optimize memset, memcmp, memcpy  for better performance and (in some instances) smaller code
+
+lede-commit: 07e59c7bc7f375f792ec9734be42fe4fa391a8bb
+Signed-off-by: Felix Fietkau <nbd@nbd.name>
+---
+ arch/mips/boot/compressed/Makefile |  3 ++-
+ arch/mips/include/asm/string.h     | 38 ++++++++++++++++++++++++++++++++++++++
+ arch/mips/lib/Makefile             |  2 +-
+ arch/mips/lib/memcmp.c             | 22 ++++++++++++++++++++++
+ 4 files changed, 63 insertions(+), 2 deletions(-)
+ create mode 100644 arch/mips/lib/memcmp.c
+
+--- a/arch/mips/boot/compressed/Makefile
++++ b/arch/mips/boot/compressed/Makefile
+@@ -23,7 +23,8 @@ KBUILD_CFLAGS := $(filter-out -pg, $(KBU
+ KBUILD_CFLAGS := $(filter-out -fstack-protector, $(KBUILD_CFLAGS))
+ 
+ KBUILD_CFLAGS := $(KBUILD_CFLAGS) -D__KERNEL__ \
+-	-DBOOT_HEAP_SIZE=$(BOOT_HEAP_SIZE) -D"VMLINUX_LOAD_ADDRESS_ULL=$(VMLINUX_LOAD_ADDRESS)ull"
++	-DBOOT_HEAP_SIZE=$(BOOT_HEAP_SIZE) -D"VMLINUX_LOAD_ADDRESS_ULL=$(VMLINUX_LOAD_ADDRESS)ull" \
++	-D__ZBOOT__
+ 
+ KBUILD_AFLAGS := $(KBUILD_AFLAGS) -D__ASSEMBLY__ \
+ 	-DBOOT_HEAP_SIZE=$(BOOT_HEAP_SIZE) \
+--- a/arch/mips/include/asm/string.h
++++ b/arch/mips/include/asm/string.h
+@@ -140,4 +140,42 @@ extern void *memcpy(void *__to, __const_
+ #define __HAVE_ARCH_MEMMOVE
+ extern void *memmove(void *__dest, __const__ void *__src, size_t __n);
+ 
++#ifndef __ZBOOT__
++#define memset(__s, __c, len)					\
++({								\
++	size_t __len = (len);					\
++	void *__ret;						\
++	if (__builtin_constant_p(len) && __len >= 64)		\
++		__ret = memset((__s), (__c), __len);		\
++	else							\
++		__ret = __builtin_memset((__s), (__c), __len);	\
++	__ret;							\
++})
++
++#define memcpy(dst, src, len)					\
++({								\
++	size_t __len = (len);					\
++	void *__ret;						\
++	if (__builtin_constant_p(len) && __len >= 64)		\
++		__ret = memcpy((dst), (src), __len);		\
++	else							\
++		__ret = __builtin_memcpy((dst), (src), __len);	\
++	__ret;							\
++})
++
++#define memmove(dst, src, len)					\
++({								\
++	size_t __len = (len);					\
++	void *__ret;						\
++	if (__builtin_constant_p(len) && __len >= 64)		\
++		__ret = memmove((dst), (src), __len);		\
++	else							\
++		__ret = __builtin_memmove((dst), (src), __len);	\
++	__ret;							\
++})
++
++#define __HAVE_ARCH_MEMCMP
++#define memcmp(src1, src2, len) __builtin_memcmp((src1), (src2), (len))
++#endif
++
+ #endif /* _ASM_STRING_H */
+--- a/arch/mips/lib/Makefile
++++ b/arch/mips/lib/Makefile
+@@ -5,7 +5,7 @@
+ 
+ lib-y	+= bitops.o csum_partial.o delay.o memcpy.o memset.o \
+ 	   mips-atomic.o strncpy_user.o \
+-	   strnlen_user.o uncached.o
++	   strnlen_user.o uncached.o memcmp.o
+ 
+ obj-y			+= iomap.o iomap_copy.o
+ obj-$(CONFIG_PCI)	+= iomap-pci.o
+--- /dev/null
++++ b/arch/mips/lib/memcmp.c
+@@ -0,0 +1,22 @@
++/*
++ *  copied from linux/lib/string.c
++ *
++ *  Copyright (C) 1991, 1992  Linus Torvalds
++ */
++
++#include <linux/module.h>
++#include <linux/string.h>
++
++#undef memcmp
++int memcmp(const void *cs, const void *ct, size_t count)
++{
++	const unsigned char *su1, *su2;
++	int res = 0;
++
++	for (su1 = cs, su2 = ct; 0 < count; ++su1, ++su2, count--)
++		if ((res = *su1 - *su2) != 0)
++			break;
++	return res;
++}
++EXPORT_SYMBOL(memcmp);
++
diff --git a/target/linux/generic/pending-5.4/307-mips_highmem_offset.patch b/target/linux/generic/pending-5.4/307-mips_highmem_offset.patch
new file mode 100644
index 0000000000..9dd2fa9863
--- /dev/null
+++ b/target/linux/generic/pending-5.4/307-mips_highmem_offset.patch
@@ -0,0 +1,19 @@
+From: Felix Fietkau <nbd@nbd.name>
+Subject: kernel: adjust mips highmem offset to avoid the need for -mlong-calls on systems with >256M RAM
+
+Signed-off-by: Felix Fietkau <nbd@nbd.name>
+---
+ arch/mips/include/asm/mach-generic/spaces.h | 2 +-
+ 1 file changed, 1 insertion(+), 1 deletion(-)
+
+--- a/arch/mips/include/asm/mach-generic/spaces.h
++++ b/arch/mips/include/asm/mach-generic/spaces.h
+@@ -50,7 +50,7 @@
+  * Memory above this physical address will be considered highmem.
+  */
+ #ifndef HIGHMEM_START
+-#define HIGHMEM_START		_AC(0x20000000, UL)
++#define HIGHMEM_START		_AC(0x10000000, UL)
+ #endif
+ 
+ #endif /* CONFIG_32BIT */
diff --git a/target/linux/generic/pending-5.4/308-mips32r2_tune.patch b/target/linux/generic/pending-5.4/308-mips32r2_tune.patch
new file mode 100644
index 0000000000..8636511464
--- /dev/null
+++ b/target/linux/generic/pending-5.4/308-mips32r2_tune.patch
@@ -0,0 +1,22 @@
+From: Felix Fietkau <nbd@nbd.name>
+Subject: kernel: add -mtune=34kc to MIPS CFLAGS when building for mips32r2
+
+This provides a good tradeoff across at least 24Kc-74Kc, while also
+producing smaller code.
+
+Signed-off-by: Felix Fietkau <nbd@nbd.name>
+---
+ arch/mips/Makefile | 2 +-
+ 1 file changed, 1 insertion(+), 1 deletion(-)
+
+--- a/arch/mips/Makefile
++++ b/arch/mips/Makefile
+@@ -177,7 +177,7 @@ cflags-$(CONFIG_CPU_VR41XX)	+= -march=r4
+ cflags-$(CONFIG_CPU_R4X00)	+= -march=r4600 -Wa,--trap
+ cflags-$(CONFIG_CPU_TX49XX)	+= -march=r4600 -Wa,--trap
+ cflags-$(CONFIG_CPU_MIPS32_R1)	+= -march=mips32 -Wa,--trap
+-cflags-$(CONFIG_CPU_MIPS32_R2)	+= -march=mips32r2 -Wa,--trap
++cflags-$(CONFIG_CPU_MIPS32_R2)	+= -march=mips32r2 -mtune=34kc -Wa,--trap
+ cflags-$(CONFIG_CPU_MIPS32_R6)	+= -march=mips32r6 -Wa,--trap -modd-spreg
+ cflags-$(CONFIG_CPU_MIPS64_R1)	+= -march=mips64 -Wa,--trap
+ cflags-$(CONFIG_CPU_MIPS64_R2)	+= -march=mips64r2 -Wa,--trap
diff --git a/target/linux/generic/pending-5.4/309-MIPS-Add-CPU-option-reporting-to-proc-cpuinfo.patch b/target/linux/generic/pending-5.4/309-MIPS-Add-CPU-option-reporting-to-proc-cpuinfo.patch
new file mode 100644
index 0000000000..e4075a24bd
--- /dev/null
+++ b/target/linux/generic/pending-5.4/309-MIPS-Add-CPU-option-reporting-to-proc-cpuinfo.patch
@@ -0,0 +1,142 @@
+From 87ec87c2ad615c1a177cd08ef5fa29fc739f6e50 Mon Sep 17 00:00:00 2001
+From: Hauke Mehrtens <hauke@hauke-m.de>
+Date: Sun, 23 Dec 2018 18:06:53 +0100
+Subject: [PATCH] MIPS: Add CPU option reporting to /proc/cpuinfo
+
+Many MIPS CPUs have optional CPU features which are not activates for
+all CPU cores. Print the CPU options which are implemented in the core
+in /proc/cpuinfo. This makes it possible to see what features are
+supported and which are not supported. This should cover all standard
+MIPS extensions, before it only printed information about the main MIPS
+ASEs.
+
+Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
+---
+ arch/mips/kernel/proc.c | 116 ++++++++++++++++++++++++++++++++++++++++
+ 1 file changed, 116 insertions(+)
+
+--- a/arch/mips/kernel/proc.c
++++ b/arch/mips/kernel/proc.c
+@@ -134,6 +134,122 @@ static int show_cpuinfo(struct seq_file
+ 		seq_printf(m, "micromips kernel\t: %s\n",
+ 		      (read_c0_config3() & MIPS_CONF3_ISA_OE) ?  "yes" : "no");
+ 	}
++
++	seq_printf(m, "Options implemented\t:");
++	if (cpu_has_tlb)
++		seq_printf(m, "%s", " tlb");
++	if (cpu_has_ftlb)
++		seq_printf(m, "%s", " ftlb");
++	if (cpu_has_tlbinv)
++		seq_printf(m, "%s", " tlbinv");
++	if (cpu_has_segments)
++		seq_printf(m, "%s", " segments");
++	if (cpu_has_rixiex)
++		seq_printf(m, "%s", " rixiex");
++	if (cpu_has_ldpte)
++		seq_printf(m, "%s", " ldpte");
++	if (cpu_has_maar)
++		seq_printf(m, "%s", " maar");
++	if (cpu_has_rw_llb)
++		seq_printf(m, "%s", " rw_llb");
++	if (cpu_has_4kex)
++		seq_printf(m, "%s", " 4kex");
++	if (cpu_has_3k_cache)
++		seq_printf(m, "%s", " 3k_cache");
++	if (cpu_has_4k_cache)
++		seq_printf(m, "%s", " 4k_cache");
++	if (cpu_has_6k_cache)
++		seq_printf(m, "%s", " 6k_cache");
++	if (cpu_has_8k_cache)
++		seq_printf(m, "%s", " 8k_cache");
++	if (cpu_has_tx39_cache)
++		seq_printf(m, "%s", " tx39_cache");
++	if (cpu_has_octeon_cache)
++		seq_printf(m, "%s", " octeon_cache");
++	if (cpu_has_fpu)
++		seq_printf(m, "%s", " fpu");
++	if (cpu_has_32fpr)
++		seq_printf(m, "%s", " 32fpr");
++	if (cpu_has_cache_cdex_p)
++		seq_printf(m, "%s", " cache_cdex_p");
++	if (cpu_has_cache_cdex_s)
++		seq_printf(m, "%s", " cache_cdex_s");
++	if (cpu_has_prefetch)
++		seq_printf(m, "%s", " prefetch");
++	if (cpu_has_mcheck)
++		seq_printf(m, "%s", " mcheck");
++	if (cpu_has_ejtag)
++		seq_printf(m, "%s", " ejtag");
++	if (cpu_has_llsc)
++		seq_printf(m, "%s", " llsc");
++	if (cpu_has_bp_ghist)
++		seq_printf(m, "%s", " bp_ghist");
++	if (cpu_has_guestctl0ext)
++		seq_printf(m, "%s", " guestctl0ext");
++	if (cpu_has_guestctl1)
++		seq_printf(m, "%s", " guestctl1");
++	if (cpu_has_guestctl2)
++		seq_printf(m, "%s", " guestctl2");
++	if (cpu_has_guestid)
++		seq_printf(m, "%s", " guestid");
++	if (cpu_has_drg)
++		seq_printf(m, "%s", " drg");
++	if (cpu_has_rixi)
++		seq_printf(m, "%s", " rixi");
++	if (cpu_has_lpa)
++		seq_printf(m, "%s", " lpa");
++	if (cpu_has_mvh)
++		seq_printf(m, "%s", " mvh");
++	if (cpu_has_vtag_icache)
++		seq_printf(m, "%s", " vtag_icache");
++	if (cpu_has_dc_aliases)
++		seq_printf(m, "%s", " dc_aliases");
++	if (cpu_has_ic_fills_f_dc)
++		seq_printf(m, "%s", " ic_fills_f_dc");
++	if (cpu_has_pindexed_dcache)
++		seq_printf(m, "%s", " pindexed_dcache");
++	if (cpu_has_userlocal)
++		seq_printf(m, "%s", " userlocal");
++	if (cpu_has_nofpuex)
++		seq_printf(m, "%s", " nofpuex");
++	if (cpu_has_vint)
++		seq_printf(m, "%s", " vint");
++	if (cpu_has_veic)
++		seq_printf(m, "%s", " veic");
++	if (cpu_has_inclusive_pcaches)
++		seq_printf(m, "%s", " inclusive_pcaches");
++	if (cpu_has_perf_cntr_intr_bit)
++		seq_printf(m, "%s", " perf_cntr_intr_bit");
++	if (cpu_has_ufr)
++		seq_printf(m, "%s", " ufr");
++	if (cpu_has_fre)
++		seq_printf(m, "%s", " fre");
++	if (cpu_has_cdmm)
++		seq_printf(m, "%s", " cdmm");
++	if (cpu_has_small_pages)
++		seq_printf(m, "%s", " small_pages");
++	if (cpu_has_nan_legacy)
++		seq_printf(m, "%s", " nan_legacy");
++	if (cpu_has_nan_2008)
++		seq_printf(m, "%s", " nan_2008");
++	if (cpu_has_ebase_wg)
++		seq_printf(m, "%s", " ebase_wg");
++	if (cpu_has_badinstr)
++		seq_printf(m, "%s", " badinstr");
++	if (cpu_has_badinstrp)
++		seq_printf(m, "%s", " badinstrp");
++	if (cpu_has_contextconfig)
++		seq_printf(m, "%s", " contextconfig");
++	if (cpu_has_perf)
++		seq_printf(m, "%s", " perf");
++	if (cpu_has_shared_ftlb_ram)
++		seq_printf(m, "%s", " shared_ftlb_ram");
++	if (cpu_has_shared_ftlb_entries)
++		seq_printf(m, "%s", " shared_ftlb_entries");
++	if (cpu_has_mipsmt_pertccounters)
++		seq_printf(m, "%s", " mipsmt_pertccounters");
++	seq_printf(m, "\n");
++
+ 	seq_printf(m, "shadow register sets\t: %d\n",
+ 		      cpu_data[n].srsets);
+ 	seq_printf(m, "kscratch registers\t: %d\n",
diff --git a/target/linux/generic/pending-5.4/310-arm_module_unresolved_weak_sym.patch b/target/linux/generic/pending-5.4/310-arm_module_unresolved_weak_sym.patch
new file mode 100644
index 0000000000..bc9f0a4c4d
--- /dev/null
+++ b/target/linux/generic/pending-5.4/310-arm_module_unresolved_weak_sym.patch
@@ -0,0 +1,22 @@
+From: Felix Fietkau <nbd@nbd.name>
+Subject: fix errors in unresolved weak symbols on arm
+
+lede-commit: 570699d4838a907c3ef9f2819bf19eb72997b32f
+Signed-off-by: Felix Fietkau <nbd@nbd.name>
+---
+ arch/arm/kernel/module.c | 4 ++++
+ 1 file changed, 4 insertions(+)
+
+--- a/arch/arm/kernel/module.c
++++ b/arch/arm/kernel/module.c
+@@ -95,6 +95,10 @@ apply_relocate(Elf32_Shdr *sechdrs, cons
+ 			return -ENOEXEC;
+ 		}
+ 
++		if ((IS_ERR_VALUE(sym->st_value) || !sym->st_value) &&
++		    ELF_ST_BIND(sym->st_info) == STB_WEAK)
++			continue;
++
+ 		loc = dstsec->sh_addr + rel->r_offset;
+ 
+ 		switch (ELF32_R_TYPE(rel->r_info)) {
diff --git a/target/linux/generic/pending-5.4/330-MIPS-kexec-Accept-command-line-parameters-from-users.patch b/target/linux/generic/pending-5.4/330-MIPS-kexec-Accept-command-line-parameters-from-users.patch
new file mode 100644
index 0000000000..44d85b5b86
--- /dev/null
+++ b/target/linux/generic/pending-5.4/330-MIPS-kexec-Accept-command-line-parameters-from-users.patch
@@ -0,0 +1,274 @@
+From: Yousong Zhou <yszhou4tech@gmail.com>
+Subject: MIPS: kexec: Accept command line parameters from userspace.
+
+Signed-off-by: Yousong Zhou <yszhou4tech@gmail.com>
+---
+ arch/mips/kernel/machine_kexec.c   |  153 +++++++++++++++++++++++++++++++-----
+ arch/mips/kernel/machine_kexec.h   |   20 +++++
+ arch/mips/kernel/relocate_kernel.S |   21 +++--
+ 3 files changed, 167 insertions(+), 27 deletions(-)
+ create mode 100644 arch/mips/kernel/machine_kexec.h
+
+--- a/arch/mips/kernel/machine_kexec.c
++++ b/arch/mips/kernel/machine_kexec.c
+@@ -10,14 +10,11 @@
+ #include <linux/mm.h>
+ #include <linux/delay.h>
+ 
++#include <asm/bootinfo.h>
+ #include <asm/cacheflush.h>
+ #include <asm/page.h>
+-
+-extern const unsigned char relocate_new_kernel[];
+-extern const size_t relocate_new_kernel_size;
+-
+-extern unsigned long kexec_start_address;
+-extern unsigned long kexec_indirection_page;
++#include <linux/uaccess.h>
++#include "machine_kexec.h"
+ 
+ int (*_machine_kexec_prepare)(struct kimage *) = NULL;
+ void (*_machine_kexec_shutdown)(void) = NULL;
+@@ -28,6 +25,101 @@ atomic_t kexec_ready_to_reboot = ATOMIC_
+ void (*_crash_smp_send_stop)(void) = NULL;
+ #endif
+ 
++static void machine_kexec_print_args(void)
++{
++	unsigned long argc = (int)kexec_args[0];
++	int i;
++
++	pr_info("kexec_args[0] (argc): %lu\n", argc);
++	pr_info("kexec_args[1] (argv): %p\n", (void *)kexec_args[1]);
++	pr_info("kexec_args[2] (env ): %p\n", (void *)kexec_args[2]);
++	pr_info("kexec_args[3] (desc): %p\n", (void *)kexec_args[3]);
++
++	for (i = 0; i < argc; i++) {
++		pr_info("kexec_argv[%d] = %p, %s\n",
++				i, kexec_argv[i], kexec_argv[i]);
++	}
++}
++
++static void machine_kexec_init_argv(struct kimage *image)
++{
++	void __user *buf = NULL;
++	size_t bufsz;
++	size_t size;
++	int i;
++
++	bufsz = 0;
++	for (i = 0; i < image->nr_segments; i++) {
++		struct kexec_segment *seg;
++
++		seg = &image->segment[i];
++		if (seg->bufsz < 6)
++			continue;
++
++		if (strncmp((char *) seg->buf, "kexec ", 6))
++			continue;
++
++		buf = seg->buf;
++		bufsz = seg->bufsz;
++		break;
++	}
++
++	if (!buf)
++		return;
++
++	size = KEXEC_COMMAND_LINE_SIZE;
++	size = min(size, bufsz);
++	if (size < bufsz)
++		pr_warn("kexec command line truncated to %zd bytes\n", size);
++
++	/* Copy to kernel space */
++	if (copy_from_user(kexec_argv_buf, buf, size))
++		pr_warn("kexec command line copy to kernel space failed\n");
++
++	kexec_argv_buf[size - 1] = 0;
++}
++
++static void machine_kexec_parse_argv(struct kimage *image)
++{
++	char *reboot_code_buffer;
++	int reloc_delta;
++	char *ptr;
++	int argc;
++	int i;
++
++	ptr = kexec_argv_buf;
++	argc = 0;
++
++	/*
++	 * convert command line string to array of parameters
++	 * (as bootloader does).
++	 */
++	while (ptr && *ptr && (KEXEC_MAX_ARGC > argc)) {
++		if (*ptr == ' ') {
++			*ptr++ = '\0';
++			continue;
++		}
++
++		kexec_argv[argc++] = ptr;
++		ptr = strchr(ptr, ' ');
++	}
++
++	if (!argc)
++		return;
++
++	kexec_args[0] = argc;
++	kexec_args[1] = (unsigned long)kexec_argv;
++	kexec_args[2] = 0;
++	kexec_args[3] = 0;
++
++	reboot_code_buffer = page_address(image->control_code_page);
++	reloc_delta = reboot_code_buffer - (char *)kexec_relocate_new_kernel;
++
++	kexec_args[1] += reloc_delta;
++	for (i = 0; i < argc; i++)
++		kexec_argv[i] += reloc_delta;
++}
++
+ static void kexec_image_info(const struct kimage *kimage)
+ {
+ 	unsigned long i;
+@@ -52,6 +144,18 @@ int
+ machine_kexec_prepare(struct kimage *kimage)
+ {
+ 	kexec_image_info(kimage);
++	/*
++	 * Whenever arguments passed from kexec-tools, Init the arguments as
++	 * the original ones to try avoiding booting failure.
++	 */
++
++	kexec_args[0] = fw_arg0;
++	kexec_args[1] = fw_arg1;
++	kexec_args[2] = fw_arg2;
++	kexec_args[3] = fw_arg3;
++
++	machine_kexec_init_argv(kimage);
++	machine_kexec_parse_argv(kimage);
+ 
+ 	if (_machine_kexec_prepare)
+ 		return _machine_kexec_prepare(kimage);
+@@ -89,10 +193,12 @@ machine_kexec(struct kimage *image)
+ 	unsigned long *ptr;
+ 
+ 	reboot_code_buffer =
+-	  (unsigned long)page_address(image->control_code_page);
++		(unsigned long)page_address(image->control_code_page);
++	pr_info("reboot_code_buffer = %p\n", (void *)reboot_code_buffer);
+ 
+ 	kexec_start_address =
+ 		(unsigned long) phys_to_virt(image->start);
++	pr_info("kexec_start_address = %p\n", (void *)kexec_start_address);
+ 
+ 	if (image->type == KEXEC_TYPE_DEFAULT) {
+ 		kexec_indirection_page =
+@@ -100,9 +206,19 @@ machine_kexec(struct kimage *image)
+ 	} else {
+ 		kexec_indirection_page = (unsigned long)&image->head;
+ 	}
++	pr_info("kexec_indirection_page = %p\n", (void *)kexec_indirection_page);
+ 
+-	memcpy((void*)reboot_code_buffer, relocate_new_kernel,
+-	       relocate_new_kernel_size);
++	pr_info("Where is memcpy: %p\n", memcpy);
++	pr_info("kexec_relocate_new_kernel = %p, kexec_relocate_new_kernel_end = %p\n",
++		(void *)kexec_relocate_new_kernel, &kexec_relocate_new_kernel_end);
++	pr_info("Copy %lu bytes from %p to %p\n", KEXEC_RELOCATE_NEW_KERNEL_SIZE,
++		(void *)kexec_relocate_new_kernel, (void *)reboot_code_buffer);
++	memcpy((void*)reboot_code_buffer, kexec_relocate_new_kernel,
++	       KEXEC_RELOCATE_NEW_KERNEL_SIZE);
++
++	pr_info("Before _print_args().\n");
++	machine_kexec_print_args();
++	pr_info("Before eval loop.\n");
+ 
+ 	/*
+ 	 * The generic kexec code builds a page list with physical
+@@ -124,15 +240,16 @@ machine_kexec(struct kimage *image)
+ 	/*
+ 	 * we do not want to be bothered.
+ 	 */
++	pr_info("Before irq_disable.\n");
+ 	local_irq_disable();
+ 
+-	printk("Will call new kernel at %08lx\n", image->start);
+-	printk("Bye ...\n");
++	pr_info("Will call new kernel at %08lx\n", image->start);
++	pr_info("Bye ...\n");
+ 	__flush_cache_all();
+ #ifdef CONFIG_SMP
+ 	/* All secondary cpus now may jump to kexec_wait cycle */
+ 	relocated_kexec_smp_wait = reboot_code_buffer +
+-		(void *)(kexec_smp_wait - relocate_new_kernel);
++		(void *)(kexec_smp_wait - kexec_relocate_new_kernel);
+ 	smp_wmb();
+ 	atomic_set(&kexec_ready_to_reboot, 1);
+ #endif
+--- /dev/null
++++ b/arch/mips/kernel/machine_kexec.h
+@@ -0,0 +1,20 @@
++#ifndef _MACHINE_KEXEC_H
++#define _MACHINE_KEXEC_H
++
++#ifndef __ASSEMBLY__
++extern const unsigned char kexec_relocate_new_kernel[];
++extern unsigned long kexec_relocate_new_kernel_end;
++extern unsigned long kexec_start_address;
++extern unsigned long kexec_indirection_page;
++
++extern char kexec_argv_buf[];
++extern char *kexec_argv[];
++
++#define KEXEC_RELOCATE_NEW_KERNEL_SIZE	((unsigned long)&kexec_relocate_new_kernel_end - (unsigned long)kexec_relocate_new_kernel)
++#endif /* !__ASSEMBLY__ */
++
++#define KEXEC_COMMAND_LINE_SIZE		256
++#define KEXEC_ARGV_SIZE			(KEXEC_COMMAND_LINE_SIZE / 16)
++#define KEXEC_MAX_ARGC			(KEXEC_ARGV_SIZE / sizeof(long))
++
++#endif
+--- a/arch/mips/kernel/relocate_kernel.S
++++ b/arch/mips/kernel/relocate_kernel.S
+@@ -12,8 +12,9 @@
+ #include <asm/mipsregs.h>
+ #include <asm/stackframe.h>
+ #include <asm/addrspace.h>
++#include "machine_kexec.h"
+ 
+-LEAF(relocate_new_kernel)
++LEAF(kexec_relocate_new_kernel)
+ 	PTR_L a0,	arg0
+ 	PTR_L a1,	arg1
+ 	PTR_L a2,	arg2
+@@ -98,7 +99,7 @@ done:
+ #endif
+ 	/* jump to kexec_start_address */
+ 	j		s1
+-	END(relocate_new_kernel)
++	END(kexec_relocate_new_kernel)
+ 
+ #ifdef CONFIG_SMP
+ /*
+@@ -184,9 +185,15 @@ kexec_indirection_page:
+ 	PTR		0
+ 	.size		kexec_indirection_page, PTRSIZE
+ 
+-relocate_new_kernel_end:
++kexec_argv_buf:
++	EXPORT(kexec_argv_buf)
++	.skip		KEXEC_COMMAND_LINE_SIZE
++	.size		kexec_argv_buf, KEXEC_COMMAND_LINE_SIZE
++
++kexec_argv:
++	EXPORT(kexec_argv)
++	.skip		KEXEC_ARGV_SIZE
++	.size		kexec_argv, KEXEC_ARGV_SIZE
+ 
+-relocate_new_kernel_size:
+-	EXPORT(relocate_new_kernel_size)
+-	PTR		relocate_new_kernel_end - relocate_new_kernel
+-	.size		relocate_new_kernel_size, PTRSIZE
++kexec_relocate_new_kernel_end:
++	EXPORT(kexec_relocate_new_kernel_end)
diff --git a/target/linux/generic/pending-5.4/332-arc-add-OWRTDTB-section.patch b/target/linux/generic/pending-5.4/332-arc-add-OWRTDTB-section.patch
new file mode 100644
index 0000000000..ec89547726
--- /dev/null
+++ b/target/linux/generic/pending-5.4/332-arc-add-OWRTDTB-section.patch
@@ -0,0 +1,84 @@
+From 34ef04f3845ed2b47d57dd9d3b795b16e1f8185a Mon Sep 17 00:00:00 2001
+From: Evgeniy Didin <Evgeniy.Didin@synopsys.com>
+Date: Fri, 15 Mar 2019 18:53:38 +0300
+Subject: [PATCH] arc add OWRTDTB section
+
+This change allows OpenWRT to patch resulting kernel binary with
+external .dtb.
+
+That allows us to re-use exactky the same vmlinux on different boards
+given its ARC core configurations match (at least cache line sizes etc).
+
+""patch-dtb" searches for ASCII "OWRTDTB:" strign and copies external
+.dtb right after it, keeping the string in place.
+
+Signed-off-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com>
+Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
+Signed-off-by: Evgeniy Didin <Evgeniy.Didin@synopsys.com>
+---
+ arch/arc/kernel/head.S        | 10 ++++++++++
+ arch/arc/kernel/setup.c       |  4 +++-
+ arch/arc/kernel/vmlinux.lds.S | 13 +++++++++++++
+ 3 files changed, 26 insertions(+), 1 deletion(-)
+
+--- a/arch/arc/kernel/head.S
++++ b/arch/arc/kernel/head.S
+@@ -59,6 +59,16 @@
+ #endif
+ .endm
+ 
++	; Here "patch-dtb" will embed external .dtb
++	; Note "patch-dtb" searches for ASCII "OWRTDTB:" string
++	; and pastes .dtb right after it, hense the string precedes
++	; __image_dtb symbol.
++	.section .owrt, "aw",@progbits
++	.ascii  "OWRTDTB:"
++ENTRY(__image_dtb)
++	.fill   0x4000
++END(__image_dtb)
++
+ 	.section .init.text, "ax",@progbits
+ 
+ ;----------------------------------------------------------------
+--- a/arch/arc/kernel/setup.c
++++ b/arch/arc/kernel/setup.c
+@@ -526,7 +526,7 @@ void __init handle_uboot_args(void)
+ ignore_uboot_args:
+ 
+ 	if (use_embedded_dtb) {
+-		machine_desc = setup_machine_fdt(__dtb_start);
++		machine_desc = setup_machine_fdt(&__image_dtb);
+ 		if (!machine_desc)
+ 			panic("Embedded DT invalid\n");
+ 	}
+@@ -542,6 +542,8 @@ ignore_uboot_args:
+ 	}
+ }
+ 
++extern struct boot_param_header __image_dtb;
++
+ void __init setup_arch(char **cmdline_p)
+ {
+ 	handle_uboot_args();
+--- a/arch/arc/kernel/vmlinux.lds.S
++++ b/arch/arc/kernel/vmlinux.lds.S
+@@ -30,6 +30,19 @@ SECTIONS
+ 
+ 	. = CONFIG_LINUX_LINK_BASE;
+ 
++	/*
++	* In OpenWRT we want to patch built binary embedding .dtb of choice.
++	* This is implemented with "patch-dtb" utility which searches for
++	* "OWRTDTB:" string in first 16k of image and if it is found
++	* copies .dtb right after mentioned string.
++	*
++	* Note: "OWRTDTB:" won't be overwritten with .dtb, .dtb will follow it.
++	*/
++ 	.owrt : {
++		*(.owrt)
++	. = ALIGN(PAGE_SIZE);
++	}
++
+ 	_int_vec_base_lds = .;
+ 	.vector : {
+ 		*(.vector)
diff --git a/target/linux/generic/pending-5.4/333-arc-enable-unaligned-access-in-kernel-mode.patch b/target/linux/generic/pending-5.4/333-arc-enable-unaligned-access-in-kernel-mode.patch
new file mode 100644
index 0000000000..4e0265aef5
--- /dev/null
+++ b/target/linux/generic/pending-5.4/333-arc-enable-unaligned-access-in-kernel-mode.patch
@@ -0,0 +1,24 @@
+From: Alexey Brodkin <abrodkin@synopsys.com>
+Subject: arc: enable unaligned access in kernel mode
+
+This enables misaligned access handling even in kernel mode.
+Some wireless drivers (ath9k-htc and mt7601u) use misaligned accesses
+here and there and to cope with that without fixing stuff in the drivers
+we're just gracefully handling it on ARC.
+
+Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
+---
+ arch/arc/kernel/unaligned.c | 2 +-
+ 1 file changed, 1 insertion(+), 1 deletion(-)
+
+--- a/arch/arc/kernel/unaligned.c
++++ b/arch/arc/kernel/unaligned.c
+@@ -206,7 +206,7 @@ int misaligned_fixup(unsigned long addre
+ 	char buf[TASK_COMM_LEN];
+ 
+ 	/* handle user mode only and only if enabled by sysadmin */
+-	if (!user_mode(regs) || !unaligned_enabled)
++	if (!unaligned_enabled)
+ 		return 1;
+ 
+ 	if (no_unaligned_warning) {
diff --git a/target/linux/generic/pending-5.4/341-MIPS-mm-remove-no-op-dma_map_ops-where-possible.patch b/target/linux/generic/pending-5.4/341-MIPS-mm-remove-no-op-dma_map_ops-where-possible.patch
new file mode 100644
index 0000000000..07a6da453f
--- /dev/null
+++ b/target/linux/generic/pending-5.4/341-MIPS-mm-remove-no-op-dma_map_ops-where-possible.patch
@@ -0,0 +1,82 @@
+From 203f17906ff45705fbdaa0430dbbc71142c2640f Mon Sep 17 00:00:00 2001
+From: Hauke Mehrtens <hauke@hauke-m.de>
+Date: Sat, 8 Dec 2018 21:45:53 +0100
+Subject: [PATCH 1/3] MIPS: Compile post DMA flush only when needed
+
+dma_sync_phys() is only called for some CPUs when a mapping is removed.
+Add ARCH_HAS_SYNC_DMA_FOR_CPU only for the CPUs listed in
+cpu_needs_post_dma_flush() which need this extra call and do not compile
+this code in for other CPUs. We need this for R10000, R12000, BMIPS5000
+CPUs and CPUs supporting MAAR which was introduced in MIPS32r5.
+
+This will hopefully improve the performance of the not affected devices.
+
+Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
+---
+ arch/mips/Kconfig              | 6 +++++-
+ arch/mips/mm/dma-noncoherent.c | 2 ++
+ 2 files changed, 7 insertions(+), 1 deletion(-)
+
+--- a/arch/mips/Kconfig
++++ b/arch/mips/Kconfig
+@@ -1117,7 +1117,6 @@ config DMA_PERDEV_COHERENT
+ config DMA_NONCOHERENT
+ 	bool
+ 	select ARCH_HAS_SYNC_DMA_FOR_DEVICE
+-	select ARCH_HAS_SYNC_DMA_FOR_CPU
+ 	select NEED_DMA_MAP_STATE
+ 	select DMA_NONCOHERENT_MMAP
+ 	select DMA_NONCOHERENT_CACHE_SYNC
+@@ -1898,9 +1897,11 @@ config SYS_HAS_CPU_MIPS32_R3_5
+ 
+ config SYS_HAS_CPU_MIPS32_R5
+ 	bool
++	select ARCH_HAS_SYNC_DMA_FOR_CPU
+ 
+ config SYS_HAS_CPU_MIPS32_R6
+ 	bool
++	select ARCH_HAS_SYNC_DMA_FOR_CPU
+ 
+ config SYS_HAS_CPU_MIPS64_R1
+ 	bool
+@@ -1910,6 +1911,7 @@ config SYS_HAS_CPU_MIPS64_R2
+ 
+ config SYS_HAS_CPU_MIPS64_R6
+ 	bool
++	select ARCH_HAS_SYNC_DMA_FOR_CPU
+ 
+ config SYS_HAS_CPU_R3000
+ 	bool
+@@ -1946,6 +1948,7 @@ config SYS_HAS_CPU_R8000
+ 
+ config SYS_HAS_CPU_R10000
+ 	bool
++	select ARCH_HAS_SYNC_DMA_FOR_CPU
+ 
+ config SYS_HAS_CPU_RM7000
+ 	bool
+@@ -1974,6 +1977,7 @@ config SYS_HAS_CPU_BMIPS4380
+ config SYS_HAS_CPU_BMIPS5000
+ 	bool
+ 	select SYS_HAS_CPU_BMIPS
++	select ARCH_HAS_SYNC_DMA_FOR_CPU
+ 
+ config SYS_HAS_CPU_XLR
+ 	bool
+--- a/arch/mips/mm/dma-noncoherent.c
++++ b/arch/mips/mm/dma-noncoherent.c
+@@ -191,12 +191,14 @@ void arch_sync_dma_for_device(struct dev
+ 		dma_sync_phys(paddr, size, dir);
+ }
+ 
++#ifdef CONFIG_ARCH_HAS_SYNC_DMA_FOR_CPU
+ void arch_sync_dma_for_cpu(struct device *dev, phys_addr_t paddr,
+ 		size_t size, enum dma_data_direction dir)
+ {
+ 	if (cpu_needs_post_dma_flush(dev))
+ 		dma_sync_phys(paddr, size, dir);
+ }
++#endif
+ 
+ void arch_dma_cache_sync(struct device *dev, void *vaddr, size_t size,
+ 		enum dma_data_direction direction)
diff --git a/target/linux/generic/pending-5.4/342-powerpc-Enable-kernel-XZ-compression-option-on-PPC_8.patch b/target/linux/generic/pending-5.4/342-powerpc-Enable-kernel-XZ-compression-option-on-PPC_8.patch
new file mode 100644
index 0000000000..035a84b1e4
--- /dev/null
+++ b/target/linux/generic/pending-5.4/342-powerpc-Enable-kernel-XZ-compression-option-on-PPC_8.patch
@@ -0,0 +1,25 @@
+From 66770a004afe10df11d3902e16eaa0c2c39436bb Mon Sep 17 00:00:00 2001
+From: Pawel Dembicki <paweldembicki@gmail.com>
+Date: Fri, 24 May 2019 17:56:19 +0200
+Subject: [PATCH] powerpc: Enable kernel XZ compression option on PPC_85xx
+
+Enable kernel XZ compression option on PPC_85xx. Tested with
+simpleImage on TP-Link TL-WDR4900 (Freescale P1014 processor).
+
+Suggested-by: Christian Lamparter <chunkeey@gmail.com>
+Signed-off-by: Pawel Dembicki <paweldembicki@gmail.com>
+---
+ arch/powerpc/Kconfig | 2 +-
+ 1 file changed, 1 insertion(+), 1 deletion(-)
+
+--- a/arch/powerpc/Kconfig
++++ b/arch/powerpc/Kconfig
+@@ -197,7 +197,7 @@ config PPC
+ 	select HAVE_IOREMAP_PROT
+ 	select HAVE_IRQ_EXIT_ON_IRQ_STACK
+ 	select HAVE_KERNEL_GZIP
+-	select HAVE_KERNEL_XZ			if PPC_BOOK3S
++	select HAVE_KERNEL_XZ			if PPC_BOOK3S || PPC_85xx
+ 	select HAVE_KPROBES
+ 	select HAVE_KPROBES_ON_FTRACE
+ 	select HAVE_KRETPROBES
diff --git a/target/linux/generic/pending-5.4/400-mtd-add-rootfs-split-support.patch b/target/linux/generic/pending-5.4/400-mtd-add-rootfs-split-support.patch
new file mode 100644
index 0000000000..bc783deb40
--- /dev/null
+++ b/target/linux/generic/pending-5.4/400-mtd-add-rootfs-split-support.patch
@@ -0,0 +1,107 @@
+From: Felix Fietkau <nbd@nbd.name>
+Subject: make rootfs split/detection more generic - patch can be moved to generic-2.6 after testing on other platforms
+
+lede-commit: 328e660b31f0937d52c5ae3d6e7029409918a9df
+Signed-off-by: Felix Fietkau <nbd@nbd.name>
+---
+ drivers/mtd/Kconfig            | 17 +++++++++++++++++
+ drivers/mtd/mtdpart.c          | 35 +++++++++++++++++++++++++++++++++++
+ include/linux/mtd/partitions.h |  2 ++
+ 3 files changed, 54 insertions(+)
+
+--- a/drivers/mtd/Kconfig
++++ b/drivers/mtd/Kconfig
+@@ -11,6 +11,23 @@ menuconfig MTD
+ 
+ if MTD
+ 
++menu "OpenWrt specific MTD options"
++
++config MTD_ROOTFS_ROOT_DEV
++	bool "Automatically set 'rootfs' partition to be root filesystem"
++	default y
++
++config MTD_SPLIT_FIRMWARE
++	bool "Automatically split firmware partition for kernel+rootfs"
++	default y
++
++config MTD_SPLIT_FIRMWARE_NAME
++	string "Firmware partition name"
++	depends on MTD_SPLIT_FIRMWARE
++	default "firmware"
++
++endmenu
++
+ config MTD_TESTS
+ 	tristate "MTD tests support (DANGEROUS)"
+ 	depends on m
+--- a/drivers/mtd/mtdpart.c
++++ b/drivers/mtd/mtdpart.c
+@@ -29,10 +29,12 @@
+ #include <linux/kmod.h>
+ #include <linux/mtd/mtd.h>
+ #include <linux/mtd/partitions.h>
++#include <linux/magic.h>
+ #include <linux/err.h>
+ #include <linux/of.h>
+ 
+ #include "mtdcore.h"
++#include "mtdsplit/mtdsplit.h"
+ 
+ /* Our partition linked list */
+ static LIST_HEAD(mtd_partitions);
+@@ -52,6 +54,8 @@ struct mtd_part {
+ 	struct list_head list;
+ };
+ 
++static void mtd_partition_split(struct mtd_info *master, struct mtd_part *part);
++
+ /*
+  * Given a pointer to the MTD object in the mtd_part structure, we can retrieve
+  * the pointer to that structure.
+@@ -626,6 +630,7 @@ int mtd_add_partition(struct mtd_info *p
+ 	if (ret)
+ 		goto err_remove_part;
+ 
++	mtd_partition_split(parent, new);
+ 	mtd_add_partition_attrs(new);
+ 
+ 	return 0;
+@@ -712,6 +717,29 @@ int mtd_del_partition(struct mtd_info *m
+ }
+ EXPORT_SYMBOL_GPL(mtd_del_partition);
+ 
++#ifdef CONFIG_MTD_SPLIT_FIRMWARE_NAME
++#define SPLIT_FIRMWARE_NAME	CONFIG_MTD_SPLIT_FIRMWARE_NAME
++#else
++#define SPLIT_FIRMWARE_NAME	"unused"
++#endif
++
++static void split_firmware(struct mtd_info *master, struct mtd_part *part)
++{
++}
++
++static void mtd_partition_split(struct mtd_info *master, struct mtd_part *part)
++{
++	static int rootfs_found = 0;
++
++	if (rootfs_found)
++		return;
++
++	if (IS_ENABLED(CONFIG_MTD_SPLIT_FIRMWARE) &&
++	    !strcmp(part->mtd.name, SPLIT_FIRMWARE_NAME) &&
++	    !of_find_property(mtd_get_of_node(&part->mtd), "compatible", NULL))
++		split_firmware(master, part);
++}
++
+ /*
+  * This function, given a master MTD object and a partition table, creates
+  * and registers slave MTD objects which are bound to the master according to
+@@ -752,6 +780,7 @@ int add_mtd_partitions(struct mtd_info *
+ 			goto err_del_partitions;
+ 		}
+ 
++		mtd_partition_split(master, slave);
+ 		mtd_add_partition_attrs(slave);
+ 		/* Look for subpartitions */
+ 		parse_mtd_partitions(&slave->mtd, parts[i].types, NULL);
diff --git a/target/linux/generic/pending-5.4/401-mtd-add-support-for-different-partition-parser-types.patch b/target/linux/generic/pending-5.4/401-mtd-add-support-for-different-partition-parser-types.patch
new file mode 100644
index 0000000000..a59659cda6
--- /dev/null
+++ b/target/linux/generic/pending-5.4/401-mtd-add-support-for-different-partition-parser-types.patch
@@ -0,0 +1,142 @@
+From: Gabor Juhos <juhosg@openwrt.org>
+Subject: mtd: add support for different partition parser types
+
+Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
+---
+ drivers/mtd/mtdpart.c          |   56 ++++++++++++++++++++++++++++++++++++++++
+ include/linux/mtd/partitions.h |   11 ++++++++
+ 2 files changed, 67 insertions(+)
+
+--- a/drivers/mtd/mtdpart.c
++++ b/drivers/mtd/mtdpart.c
+@@ -55,6 +55,10 @@ struct mtd_part {
+ };
+ 
+ static void mtd_partition_split(struct mtd_info *master, struct mtd_part *part);
++static int parse_mtd_partitions_by_type(struct mtd_info *master,
++					enum mtd_parser_type type,
++					const struct mtd_partition **pparts,
++					struct mtd_part_parser_data *data);
+ 
+ /*
+  * Given a pointer to the MTD object in the mtd_part structure, we can retrieve
+@@ -717,6 +721,36 @@ int mtd_del_partition(struct mtd_info *m
+ }
+ EXPORT_SYMBOL_GPL(mtd_del_partition);
+ 
++static int
++run_parsers_by_type(struct mtd_part *slave, enum mtd_parser_type type)
++{
++	struct mtd_partition *parts;
++	int nr_parts;
++	int i;
++
++	nr_parts = parse_mtd_partitions_by_type(&slave->mtd, type, (const struct mtd_partition **)&parts,
++						NULL);
++	if (nr_parts <= 0)
++		return nr_parts;
++
++	if (WARN_ON(!parts))
++		return 0;
++
++	for (i = 0; i < nr_parts; i++) {
++		/* adjust partition offsets */
++		parts[i].offset += slave->offset;
++
++		mtd_add_partition(slave->parent,
++				  parts[i].name,
++				  parts[i].offset,
++				  parts[i].size);
++	}
++
++	kfree(parts);
++
++	return nr_parts;
++}
++
+ #ifdef CONFIG_MTD_SPLIT_FIRMWARE_NAME
+ #define SPLIT_FIRMWARE_NAME	CONFIG_MTD_SPLIT_FIRMWARE_NAME
+ #else
+@@ -1066,6 +1100,61 @@ void mtd_part_parser_cleanup(struct mtd_
+ 	}
+ }
+ 
++static struct mtd_part_parser *
++get_partition_parser_by_type(enum mtd_parser_type type,
++			     struct mtd_part_parser *start)
++{
++	struct mtd_part_parser *p, *ret = NULL;
++
++	spin_lock(&part_parser_lock);
++
++	p = list_prepare_entry(start, &part_parsers, list);
++	if (start)
++		mtd_part_parser_put(start);
++
++	list_for_each_entry_continue(p, &part_parsers, list) {
++		if (p->type == type && try_module_get(p->owner)) {
++			ret = p;
++			break;
++		}
++	}
++
++	spin_unlock(&part_parser_lock);
++
++	return ret;
++}
++
++static int parse_mtd_partitions_by_type(struct mtd_info *master,
++					enum mtd_parser_type type,
++					const struct mtd_partition **pparts,
++					struct mtd_part_parser_data *data)
++{
++	struct mtd_part_parser *prev = NULL;
++	int ret = 0;
++
++	while (1) {
++		struct mtd_part_parser *parser;
++
++		parser = get_partition_parser_by_type(type, prev);
++		if (!parser)
++			break;
++
++		ret = (*parser->parse_fn)(master, pparts, data);
++
++		if (ret > 0) {
++			mtd_part_parser_put(parser);
++			printk(KERN_NOTICE
++			       "%d %s partitions found on MTD device %s\n",
++			       ret, parser->name, master->name);
++			break;
++		}
++
++		prev = parser;
++	}
++
++	return ret;
++}
++
+ int mtd_is_partition(const struct mtd_info *mtd)
+ {
+ 	struct mtd_part *part;
+--- a/include/linux/mtd/partitions.h
++++ b/include/linux/mtd/partitions.h
+@@ -73,6 +73,10 @@ struct mtd_part_parser_data {
+  * Functions dealing with the various ways of partitioning the space
+  */
+ 
++enum mtd_parser_type {
++	MTD_PARSER_TYPE_DEVICE = 0,
++};
++
+ struct mtd_part_parser {
+ 	struct list_head list;
+ 	struct module *owner;
+@@ -81,6 +85,7 @@ struct mtd_part_parser {
+ 	int (*parse_fn)(struct mtd_info *, const struct mtd_partition **,
+ 			struct mtd_part_parser_data *);
+ 	void (*cleanup)(const struct mtd_partition *pparts, int nr_parts);
++	enum mtd_parser_type type;
+ };
+ 
+ /* Container for passing around a set of parsed partitions */
diff --git a/target/linux/generic/pending-5.4/402-mtd-use-typed-mtd-parsers-for-rootfs-and-firmware-split.patch b/target/linux/generic/pending-5.4/402-mtd-use-typed-mtd-parsers-for-rootfs-and-firmware-split.patch
new file mode 100644
index 0000000000..58d2e44574
--- /dev/null
+++ b/target/linux/generic/pending-5.4/402-mtd-use-typed-mtd-parsers-for-rootfs-and-firmware-split.patch
@@ -0,0 +1,44 @@
+From: Gabor Juhos <juhosg@openwrt.org>
+Subject: kernel/3.10: allow to use partition parsers for rootfs and firmware split
+
+lede-commit: 3b71cd94bc9517bc25267dccb393b07d4b54564e
+Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
+---
+ drivers/mtd/mtdpart.c          | 37 +++++++++++++++++++++++++++++++++++++
+ include/linux/mtd/partitions.h |  2 ++
+ 2 files changed, 39 insertions(+)
+
+--- a/drivers/mtd/mtdpart.c
++++ b/drivers/mtd/mtdpart.c
+@@ -759,6 +759,7 @@ run_parsers_by_type(struct mtd_part *sla
+ 
+ static void split_firmware(struct mtd_info *master, struct mtd_part *part)
+ {
++	run_parsers_by_type(part, MTD_PARSER_TYPE_FIRMWARE);
+ }
+ 
+ static void mtd_partition_split(struct mtd_info *master, struct mtd_part *part)
+@@ -768,6 +769,12 @@ static void mtd_partition_split(struct m
+ 	if (rootfs_found)
+ 		return;
+ 
++	if (!strcmp(part->mtd.name, "rootfs")) {
++		run_parsers_by_type(part, MTD_PARSER_TYPE_ROOTFS);
++
++		rootfs_found = 1;
++	}
++
+ 	if (IS_ENABLED(CONFIG_MTD_SPLIT_FIRMWARE) &&
+ 	    !strcmp(part->mtd.name, SPLIT_FIRMWARE_NAME) &&
+ 	    !of_find_property(mtd_get_of_node(&part->mtd), "compatible", NULL))
+--- a/include/linux/mtd/partitions.h
++++ b/include/linux/mtd/partitions.h
+@@ -75,6 +75,8 @@ struct mtd_part_parser_data {
+ 
+ enum mtd_parser_type {
+ 	MTD_PARSER_TYPE_DEVICE = 0,
++	MTD_PARSER_TYPE_ROOTFS,
++	MTD_PARSER_TYPE_FIRMWARE,
+ };
+ 
+ struct mtd_part_parser {
diff --git a/target/linux/generic/pending-5.4/403-mtd-hook-mtdsplit-to-Kbuild.patch b/target/linux/generic/pending-5.4/403-mtd-hook-mtdsplit-to-Kbuild.patch
new file mode 100644
index 0000000000..60cf043e9b
--- /dev/null
+++ b/target/linux/generic/pending-5.4/403-mtd-hook-mtdsplit-to-Kbuild.patch
@@ -0,0 +1,32 @@
+From: Gabor Juhos <juhosg@openwrt.org>
+Subject: [PATCH] kernel/3.10: move squashfs check from rootfs split code into a separate file
+
+lede-commit: d89bea92b31b4e157a0fa438e75370f089f73427
+Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
+---
+ drivers/mtd/Kconfig  | 2 ++
+ drivers/mtd/Makefile | 2 ++
+ 2 files changed, 4 insertions(+)
+
+--- a/drivers/mtd/Kconfig
++++ b/drivers/mtd/Kconfig
+@@ -26,6 +26,8 @@ config MTD_SPLIT_FIRMWARE_NAME
+ 	depends on MTD_SPLIT_FIRMWARE
+ 	default "firmware"
+ 
++source "drivers/mtd/mtdsplit/Kconfig"
++
+ endmenu
+ 
+ config MTD_TESTS
+--- a/drivers/mtd/Makefile
++++ b/drivers/mtd/Makefile
+@@ -7,6 +7,8 @@
+ obj-$(CONFIG_MTD)		+= mtd.o
+ mtd-y				:= mtdcore.o mtdsuper.o mtdconcat.o mtdpart.o mtdchar.o
+ 
++obj-$(CONFIG_MTD_SPLIT)		+= mtdsplit/
++
+ obj-$(CONFIG_MTD_OF_PARTS)	+= ofpart.o
+ obj-$(CONFIG_MTD_REDBOOT_PARTS) += redboot.o
+ obj-$(CONFIG_MTD_CMDLINE_PARTS) += cmdlinepart.o
diff --git a/target/linux/generic/pending-5.4/404-mtd-add-more-helper-functions.patch b/target/linux/generic/pending-5.4/404-mtd-add-more-helper-functions.patch
new file mode 100644
index 0000000000..e404ec1fb2
--- /dev/null
+++ b/target/linux/generic/pending-5.4/404-mtd-add-more-helper-functions.patch
@@ -0,0 +1,76 @@
+From: Gabor Juhos <juhosg@openwrt.org>
+Subject: kernel/3.10: add separate rootfs partition parser
+
+lede-commit: daec7ad7688415156e2730e401503d09bd3acf91
+Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
+---
+ drivers/mtd/mtdpart.c          | 29 +++++++++++++++++++++++++++++
+ include/linux/mtd/mtd.h        | 18 ++++++++++++++++++
+ include/linux/mtd/partitions.h |  2 ++
+ 3 files changed, 49 insertions(+)
+
+--- a/drivers/mtd/mtdpart.c
++++ b/drivers/mtd/mtdpart.c
+@@ -1179,6 +1179,24 @@ int mtd_is_partition(const struct mtd_in
+ }
+ EXPORT_SYMBOL_GPL(mtd_is_partition);
+ 
++struct mtd_info *mtdpart_get_master(const struct mtd_info *mtd)
++{
++	if (!mtd_is_partition(mtd))
++		return (struct mtd_info *)mtd;
++
++	return mtd_to_part(mtd)->parent;
++}
++EXPORT_SYMBOL_GPL(mtdpart_get_master);
++
++uint64_t mtdpart_get_offset(const struct mtd_info *mtd)
++{
++	if (!mtd_is_partition(mtd))
++		return 0;
++
++	return mtd_to_part(mtd)->offset;
++}
++EXPORT_SYMBOL_GPL(mtdpart_get_offset);
++
+ /* Returns the size of the entire flash chip */
+ uint64_t mtd_get_device_size(const struct mtd_info *mtd)
+ {
+--- a/include/linux/mtd/mtd.h
++++ b/include/linux/mtd/mtd.h
+@@ -507,6 +507,24 @@ static inline void mtd_align_erase_req(s
+ 		req->len += mtd->erasesize - mod;
+ }
+ 
++static inline uint64_t mtd_roundup_to_eb(uint64_t sz, struct mtd_info *mtd)
++{
++	if (mtd_mod_by_eb(sz, mtd) == 0)
++		return sz;
++
++	/* Round up to next erase block */
++	return (mtd_div_by_eb(sz, mtd) + 1) * mtd->erasesize;
++}
++
++static inline uint64_t mtd_rounddown_to_eb(uint64_t sz, struct mtd_info *mtd)
++{
++	if (mtd_mod_by_eb(sz, mtd) == 0)
++		return sz;
++
++	/* Round down to the start of the current erase block */
++	return (mtd_div_by_eb(sz, mtd)) * mtd->erasesize;
++}
++
+ static inline uint32_t mtd_div_by_ws(uint64_t sz, struct mtd_info *mtd)
+ {
+ 	if (mtd->writesize_shift)
+--- a/include/linux/mtd/partitions.h
++++ b/include/linux/mtd/partitions.h
+@@ -116,6 +116,8 @@ int mtd_is_partition(const struct mtd_in
+ int mtd_add_partition(struct mtd_info *master, const char *name,
+ 		      long long offset, long long length);
+ int mtd_del_partition(struct mtd_info *master, int partno);
++struct mtd_info *mtdpart_get_master(const struct mtd_info *mtd);
++uint64_t mtdpart_get_offset(const struct mtd_info *mtd);
+ uint64_t mtd_get_device_size(const struct mtd_info *mtd);
+ 
+ #endif
diff --git a/target/linux/generic/pending-5.4/411-mtd-partial_eraseblock_write.patch b/target/linux/generic/pending-5.4/411-mtd-partial_eraseblock_write.patch
new file mode 100644
index 0000000000..bf9822fda8
--- /dev/null
+++ b/target/linux/generic/pending-5.4/411-mtd-partial_eraseblock_write.patch
@@ -0,0 +1,132 @@
+From: Felix Fietkau <nbd@nbd.name>
+Subject: mtd: implement write support for partitions covering only a part of an eraseblock (buffer data that would otherwise be erased)
+
+lede-commit: 87a8e8ac1067f58ba831c4aae443f3655c31cd80
+Signed-off-by: Felix Fietkau <nbd@nbd.name>
+---
+ drivers/mtd/mtdpart.c   | 90 ++++++++++++++++++++++++++++++++++++++++++++-----
+ include/linux/mtd/mtd.h |  4 +++
+ 2 files changed, 85 insertions(+), 9 deletions(-)
+
+--- a/drivers/mtd/mtdpart.c
++++ b/drivers/mtd/mtdpart.c
+@@ -36,6 +36,8 @@
+ #include "mtdcore.h"
+ #include "mtdsplit/mtdsplit.h"
+ 
++#define MTD_ERASE_PARTIAL	0x8000 /* partition only covers parts of an erase block */
++
+ /* Our partition linked list */
+ static LIST_HEAD(mtd_partitions);
+ static DEFINE_MUTEX(mtd_partitions_mutex);
+@@ -220,6 +222,53 @@ static int part_erase(struct mtd_info *m
+ {
+ 	struct mtd_part *part = mtd_to_part(mtd);
+ 	int ret;
++	size_t wrlen = 0;
++	u8 *erase_buf = NULL;
++	u32 erase_buf_ofs = 0;
++	bool partial_start = false;
++
++	if (mtd->flags & MTD_ERASE_PARTIAL) {
++		size_t readlen = 0;
++		u64 mtd_ofs;
++
++		erase_buf = kmalloc(part->parent->erasesize, GFP_ATOMIC);
++		if (!erase_buf)
++			return -ENOMEM;
++
++		mtd_ofs = part->offset + instr->addr;
++		erase_buf_ofs = do_div(mtd_ofs, part->parent->erasesize);
++
++		if (erase_buf_ofs > 0) {
++			instr->addr -= erase_buf_ofs;
++			ret = mtd_read(part->parent,
++				instr->addr + part->offset,
++				part->parent->erasesize,
++				&readlen, erase_buf);
++
++			instr->len += erase_buf_ofs;
++			partial_start = true;
++		} else {
++			mtd_ofs = part->offset + part->mtd.size;
++			erase_buf_ofs = part->parent->erasesize -
++				do_div(mtd_ofs, part->parent->erasesize);
++
++			if (erase_buf_ofs > 0) {
++				instr->len += erase_buf_ofs;
++				ret = mtd_read(part->parent,
++					part->offset + instr->addr +
++					instr->len - part->parent->erasesize,
++					part->parent->erasesize, &readlen,
++					erase_buf);
++			} else {
++				ret = 0;
++			}
++		}
++		if (ret < 0) {
++			kfree(erase_buf);
++			return ret;
++		}
++
++	}
+ 
+ 	instr->addr += part->offset;
+ 	ret = part->parent->_erase(part->parent, instr);
+@@ -227,6 +276,24 @@ static int part_erase(struct mtd_info *m
+ 		instr->fail_addr -= part->offset;
+ 	instr->addr -= part->offset;
+ 
++	if (mtd->flags & MTD_ERASE_PARTIAL) {
++		if (partial_start) {
++			part->parent->_write(part->parent,
++				instr->addr, erase_buf_ofs,
++				&wrlen, erase_buf);
++			instr->addr += erase_buf_ofs;
++		} else {
++			instr->len -= erase_buf_ofs;
++			part->parent->_write(part->parent,
++				instr->addr + instr->len,
++				erase_buf_ofs, &wrlen,
++				erase_buf +
++				part->parent->erasesize -
++				erase_buf_ofs);
++		}
++		kfree(erase_buf);
++	}
++
+ 	return ret;
+ }
+ 
+@@ -539,19 +606,22 @@ static struct mtd_part *allocate_partiti
+ 	remainder = do_div(tmp, wr_alignment);
+ 	if ((slave->mtd.flags & MTD_WRITEABLE) && remainder) {
+ 		/* Doesn't start on a boundary of major erase size */
+-		/* FIXME: Let it be writable if it is on a boundary of
+-		 * _minor_ erase size though */
+-		slave->mtd.flags &= ~MTD_WRITEABLE;
+-		printk(KERN_WARNING"mtd: partition \"%s\" doesn't start on an erase/write block boundary -- force read-only\n",
+-			part->name);
++		slave->mtd.flags |= MTD_ERASE_PARTIAL;
++		if (((u32)slave->mtd.size) > parent->erasesize)
++			slave->mtd.flags &= ~MTD_WRITEABLE;
++		else
++			slave->mtd.erasesize = slave->mtd.size;
+ 	}
+ 
+-	tmp = part_absolute_offset(parent) + slave->mtd.size;
++	tmp = part_absolute_offset(parent) + slave->offset + slave->mtd.size;
+ 	remainder = do_div(tmp, wr_alignment);
+ 	if ((slave->mtd.flags & MTD_WRITEABLE) && remainder) {
+-		slave->mtd.flags &= ~MTD_WRITEABLE;
+-		printk(KERN_WARNING"mtd: partition \"%s\" doesn't end on an erase/write block -- force read-only\n",
+-			part->name);
++		slave->mtd.flags |= MTD_ERASE_PARTIAL;
++
++		if ((u32)slave->mtd.size > parent->erasesize)
++			slave->mtd.flags &= ~MTD_WRITEABLE;
++		else
++			slave->mtd.erasesize = slave->mtd.size;
+ 	}
+ 
+ 	mtd_set_ooblayout(&slave->mtd, &part_ooblayout_ops);
diff --git a/target/linux/generic/pending-5.4/412-mtd-partial_eraseblock_unlock.patch b/target/linux/generic/pending-5.4/412-mtd-partial_eraseblock_unlock.patch
new file mode 100644
index 0000000000..a54603a0f8
--- /dev/null
+++ b/target/linux/generic/pending-5.4/412-mtd-partial_eraseblock_unlock.patch
@@ -0,0 +1,40 @@
+From: Tim Harvey <tharvey@gateworks.com>
+Subject: mtd: allow partial block unlock
+
+This allows sysupgrade for devices such as the Gateworks Avila/Cambria
+product families based on the ixp4xx using the redboot bootloader with
+combined FIS directory and RedBoot config partitions on larger FLASH
+devices with larger eraseblocks.
+
+This second iteration of this patch addresses previous issues:
+- whitespace breakage fixed
+- unlock in all scenarios
+- simplification and fix logic bug
+
+[john@phrozen.org: this should be moved to the ixp4xx folder]
+
+Signed-off-by: Tim Harvey <tharvey@gateworks.com>
+---
+ drivers/mtd/mtdpart.c | 11 ++++++++++-
+ 1 file changed, 10 insertions(+), 1 deletion(-)
+
+--- a/drivers/mtd/mtdpart.c
++++ b/drivers/mtd/mtdpart.c
+@@ -306,7 +306,16 @@ static int part_lock(struct mtd_info *mt
+ static int part_unlock(struct mtd_info *mtd, loff_t ofs, uint64_t len)
+ {
+ 	struct mtd_part *part = mtd_to_part(mtd);
+-	return part->parent->_unlock(part->parent, ofs + part->offset, len);
++
++	ofs += part->offset;
++
++	if (mtd->flags & MTD_ERASE_PARTIAL) {
++		/* round up len to next erasesize and round down offset to prev block */
++		len = (mtd_div_by_eb(len, part->parent) + 1) * part->parent->erasesize;
++		ofs &= ~(part->parent->erasesize - 1);
++	}
++
++	return part->parent->_unlock(part->parent, ofs, len);
+ }
+ 
+ static int part_is_locked(struct mtd_info *mtd, loff_t ofs, uint64_t len)
diff --git a/target/linux/generic/pending-5.4/419-mtd-redboot-add-of_match_table-with-DT-binding.patch b/target/linux/generic/pending-5.4/419-mtd-redboot-add-of_match_table-with-DT-binding.patch
new file mode 100644
index 0000000000..fbf9a0553c
--- /dev/null
+++ b/target/linux/generic/pending-5.4/419-mtd-redboot-add-of_match_table-with-DT-binding.patch
@@ -0,0 +1,31 @@
+From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <rafal@milecki.pl>
+Subject: [PATCH] mtd: redboot: add of_match_table with DT binding
+MIME-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+
+This allows parsing RedBoot compatible partitions for properly described
+flash device in DT.
+
+Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
+---
+
+--- a/drivers/mtd/redboot.c
++++ b/drivers/mtd/redboot.c
+@@ -289,9 +289,16 @@ static int parse_redboot_partitions(stru
+ 	return ret;
+ }
+ 
++static const struct of_device_id redboot_parser_of_match_table[] = {
++	{ .compatible = "ecoscentric,redboot-fis-partitions" },
++	{},
++};
++MODULE_DEVICE_TABLE(of, redboot_parser_of_match_table);
++
+ static struct mtd_part_parser redboot_parser = {
+ 	.parse_fn = parse_redboot_partitions,
+ 	.name = "RedBoot",
++	.of_match_table = redboot_parser_of_match_table,
+ };
+ module_mtd_part_parser(redboot_parser);
+ 
diff --git a/target/linux/generic/pending-5.4/420-mtd-redboot_space.patch b/target/linux/generic/pending-5.4/420-mtd-redboot_space.patch
new file mode 100644
index 0000000000..85fbe0512d
--- /dev/null
+++ b/target/linux/generic/pending-5.4/420-mtd-redboot_space.patch
@@ -0,0 +1,41 @@
+From: Felix Fietkau <nbd@nbd.name>
+Subject: add patch for including unpartitioned space in the rootfs partition for redboot devices (if applicable)
+
+[john@phrozen.org: used by ixp and others]
+
+lede-commit: 394918851f84e4d00fa16eb900e7700e95091f00
+Signed-off-by: Felix Fietkau <nbd@nbd.name>
+---
+ drivers/mtd/redboot.c | 19 +++++++++++++------
+ 1 file changed, 13 insertions(+), 6 deletions(-)
+
+--- a/drivers/mtd/redboot.c
++++ b/drivers/mtd/redboot.c
+@@ -265,14 +265,21 @@ static int parse_redboot_partitions(stru
+ #endif
+ 		names += strlen(names)+1;
+ 
+-#ifdef CONFIG_MTD_REDBOOT_PARTS_UNALLOCATED
+ 		if(fl->next && fl->img->flash_base + fl->img->size + master->erasesize <= fl->next->img->flash_base) {
+-			i++;
+-			parts[i].offset = parts[i-1].size + parts[i-1].offset;
+-			parts[i].size = fl->next->img->flash_base - parts[i].offset;
+-			parts[i].name = nullname;
+-		}
++			if (!strcmp(parts[i].name, "rootfs")) {
++				parts[i].size = fl->next->img->flash_base;
++				parts[i].size &= ~(master->erasesize - 1);
++				parts[i].size -= parts[i].offset;
++#ifdef CONFIG_MTD_REDBOOT_PARTS_UNALLOCATED
++				nrparts--;
++			} else {
++				i++;
++				parts[i].offset = parts[i-1].size + parts[i-1].offset;
++				parts[i].size = fl->next->img->flash_base - parts[i].offset;
++				parts[i].name = nullname;
+ #endif
++			}
++		}
+ 		tmp_fl = fl;
+ 		fl = fl->next;
+ 		kfree(tmp_fl);
diff --git a/target/linux/generic/pending-5.4/430-mtd-add-myloader-partition-parser.patch b/target/linux/generic/pending-5.4/430-mtd-add-myloader-partition-parser.patch
new file mode 100644
index 0000000000..bd49893dd8
--- /dev/null
+++ b/target/linux/generic/pending-5.4/430-mtd-add-myloader-partition-parser.patch
@@ -0,0 +1,47 @@
+From: Florian Fainelli <f.fainelli@gmail.com>
+Subject: Add myloader partition table parser
+
+[john@phozen.org: shoud be upstreamable]
+
+lede-commit: d8bf22859b51faa09d22c056fe221a45d2f7a3b8
+Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
+---
+ drivers/mtd/Kconfig  | 16 ++++++++++++++++
+ drivers/mtd/Makefile |  1 +
+ 2 files changed, 17 insertions(+)
+
+--- a/drivers/mtd/Kconfig
++++ b/drivers/mtd/Kconfig
+@@ -177,6 +177,22 @@ menu "Partition parsers"
+ source "drivers/mtd/parsers/Kconfig"
+ endmenu
+ 
++config MTD_MYLOADER_PARTS
++	tristate "MyLoader partition parsing"
++	depends on ADM5120 || ATH25 || ATH79
++	---help---
++	  MyLoader is a bootloader which allows the user to define partitions
++	  in flash devices, by putting a table in the second erase block
++	  on the device, similar to a partition table. This table gives the 
++	  offsets and lengths of the user defined partitions.
++
++	  If you need code which can detect and parse these tables, and
++	  register MTD 'partitions' corresponding to each image detected,
++	  enable this option.
++
++	  You will still need the parsing functions to be called by the driver
++	  for your particular device. It won't happen automatically.
++
+ comment "User Modules And Translation Layers"
+ 
+ #
+--- a/drivers/mtd/Makefile
++++ b/drivers/mtd/Makefile
+@@ -16,6 +16,7 @@ obj-$(CONFIG_MTD_AFS_PARTS)	+= afs.o
+ obj-$(CONFIG_MTD_AR7_PARTS)	+= ar7part.o
+ obj-$(CONFIG_MTD_BCM63XX_PARTS)	+= bcm63xxpart.o
+ obj-$(CONFIG_MTD_BCM47XX_PARTS)	+= bcm47xxpart.o
++obj-$(CONFIG_MTD_MYLOADER_PARTS) += myloader.o
+ obj-y				+= parsers/
+ 
+ # 'Users' - code which presents functionality to userspace.
diff --git a/target/linux/generic/pending-5.4/431-mtd-bcm47xxpart-check-for-bad-blocks-when-calculatin.patch b/target/linux/generic/pending-5.4/431-mtd-bcm47xxpart-check-for-bad-blocks-when-calculatin.patch
new file mode 100644
index 0000000000..d54c284c34
--- /dev/null
+++ b/target/linux/generic/pending-5.4/431-mtd-bcm47xxpart-check-for-bad-blocks-when-calculatin.patch
@@ -0,0 +1,68 @@
+From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <zajec5@gmail.com>
+Subject: [PATCH] mtd: bcm47xxpart: check for bad blocks when calculating offsets
+
+Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
+---
+
+--- a/drivers/mtd/parsers/parser_trx.c
++++ b/drivers/mtd/parsers/parser_trx.c
+@@ -29,6 +29,33 @@ struct trx_header {
+ 	uint32_t offset[3];
+ } __packed;
+ 
++/*
++ * Calculate real end offset (address) for a given amount of data. It checks
++ * all blocks skipping bad ones.
++ */
++static size_t parser_trx_real_offset(struct mtd_info *mtd, size_t bytes)
++{
++	size_t real_offset = 0;
++
++	if (mtd_block_isbad(mtd, real_offset))
++		pr_warn("Base offset shouldn't be at bad block");
++
++	while (bytes >= mtd->erasesize) {
++		bytes -= mtd->erasesize;
++		real_offset += mtd->erasesize;
++		while (mtd_block_isbad(mtd, real_offset)) {
++			real_offset += mtd->erasesize;
++
++			if (real_offset >= mtd->size)
++				return real_offset - mtd->erasesize;
++		}
++	}
++
++	real_offset += bytes;
++
++	return real_offset;
++}
++
+ static const char *parser_trx_data_part_name(struct mtd_info *master,
+ 					     size_t offset)
+ {
+@@ -83,21 +110,21 @@ static int parser_trx_parse(struct mtd_i
+ 	if (trx.offset[2]) {
+ 		part = &parts[curr_part++];
+ 		part->name = "loader";
+-		part->offset = trx.offset[i];
++		part->offset = parser_trx_real_offset(mtd, trx.offset[i]);
+ 		i++;
+ 	}
+ 
+ 	if (trx.offset[i]) {
+ 		part = &parts[curr_part++];
+ 		part->name = "linux";
+-		part->offset = trx.offset[i];
++		part->offset = parser_trx_real_offset(mtd, trx.offset[i]);
+ 		i++;
+ 	}
+ 
+ 	if (trx.offset[i]) {
+ 		part = &parts[curr_part++];
+-		part->name = parser_trx_data_part_name(mtd, trx.offset[i]);
+-		part->offset = trx.offset[i];
++		part->offset = parser_trx_real_offset(mtd, trx.offset[i]);
++		part->name = parser_trx_data_part_name(mtd, part->offset);
+ 		i++;
+ 	}
+ 
diff --git a/target/linux/generic/pending-5.4/432-mtd-bcm47xxpart-detect-T_Meter-partition.patch b/target/linux/generic/pending-5.4/432-mtd-bcm47xxpart-detect-T_Meter-partition.patch
new file mode 100644
index 0000000000..a6d0828b99
--- /dev/null
+++ b/target/linux/generic/pending-5.4/432-mtd-bcm47xxpart-detect-T_Meter-partition.patch
@@ -0,0 +1,37 @@
+From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <zajec5@gmail.com>
+Subject: mtd: bcm47xxpart: detect T_Meter partition
+
+It can be found on many Netgear devices. It consists of many 0x30 blocks
+starting with 4D 54.
+
+Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
+---
+ drivers/mtd/bcm47xxpart.c | 10 ++++++++++
+ 1 file changed, 10 insertions(+)
+
+--- a/drivers/mtd/bcm47xxpart.c
++++ b/drivers/mtd/bcm47xxpart.c
+@@ -39,6 +39,7 @@
+ #define NVRAM_HEADER			0x48534C46	/* FLSH */
+ #define POT_MAGIC1			0x54544f50	/* POTT */
+ #define POT_MAGIC2			0x504f		/* OP */
++#define T_METER_MAGIC			0x4D540000	/* MT */
+ #define ML_MAGIC1			0x39685a42
+ #define ML_MAGIC2			0x26594131
+ #define TRX_MAGIC			0x30524448
+@@ -182,6 +183,15 @@ static int bcm47xxpart_parse(struct mtd_
+ 					     MTD_WRITEABLE);
+ 			continue;
+ 		}
++
++		/* T_Meter */
++		if ((le32_to_cpu(buf[0x000 / 4]) & 0xFFFF0000) == T_METER_MAGIC &&
++		    (le32_to_cpu(buf[0x030 / 4]) & 0xFFFF0000) == T_METER_MAGIC &&
++		    (le32_to_cpu(buf[0x060 / 4]) & 0xFFFF0000) == T_METER_MAGIC) {
++			bcm47xxpart_add_part(&parts[curr_part++], "T_Meter", offset,
++					     MTD_WRITEABLE);
++			continue;
++		}
+ 
+ 		/* TRX */
+ 		if (buf[0x000 / 4] == TRX_MAGIC) {
diff --git a/target/linux/generic/pending-5.4/440-block2mtd_init.patch b/target/linux/generic/pending-5.4/440-block2mtd_init.patch
new file mode 100644
index 0000000000..b8ec11f3dd
--- /dev/null
+++ b/target/linux/generic/pending-5.4/440-block2mtd_init.patch
@@ -0,0 +1,116 @@
+From: Felix Fietkau <nbd@nbd.name>
+Subject: block2mtd
+
+Signed-off-by: Felix Fietkau <nbd@nbd.name>
+---
+ drivers/mtd/devices/block2mtd.c | 30 ++++++++++++++++++++----------
+ 1 file changed, 20 insertions(+), 10 deletions(-)
+
+--- a/drivers/mtd/devices/block2mtd.c
++++ b/drivers/mtd/devices/block2mtd.c
+@@ -26,6 +26,7 @@
+ #include <linux/list.h>
+ #include <linux/init.h>
+ #include <linux/mtd/mtd.h>
++#include <linux/mtd/partitions.h>
+ #include <linux/mutex.h>
+ #include <linux/mount.h>
+ #include <linux/slab.h>
+@@ -214,7 +215,7 @@ static void block2mtd_free_device(struct
+ 
+ 
+ static struct block2mtd_dev *add_device(char *devname, int erase_size,
+-		int timeout)
++		const char *mtdname, int timeout)
+ {
+ #ifndef MODULE
+ 	int i;
+@@ -222,6 +223,7 @@ static struct block2mtd_dev *add_device(
+ 	const fmode_t mode = FMODE_READ | FMODE_WRITE | FMODE_EXCL;
+ 	struct block_device *bdev;
+ 	struct block2mtd_dev *dev;
++	struct mtd_partition *part;
+ 	char *name;
+ 
+ 	if (!devname)
+@@ -278,13 +280,16 @@ static struct block2mtd_dev *add_device(
+ 
+ 	/* Setup the MTD structure */
+ 	/* make the name contain the block device in */
+-	name = kasprintf(GFP_KERNEL, "block2mtd: %s", devname);
++	if (!mtdname)
++		mtdname = devname;
++	name = kmalloc(strlen(mtdname) + 1, GFP_KERNEL);
+ 	if (!name)
+ 		goto err_destroy_mutex;
+ 
++	strcpy(name, mtdname);
+ 	dev->mtd.name = name;
+ 
+-	dev->mtd.size = dev->blkdev->bd_inode->i_size & PAGE_MASK;
++	dev->mtd.size = dev->blkdev->bd_inode->i_size & PAGE_MASK & ~(erase_size - 1);
+ 	dev->mtd.erasesize = erase_size;
+ 	dev->mtd.writesize = 1;
+ 	dev->mtd.writebufsize = PAGE_SIZE;
+@@ -297,7 +302,11 @@ static struct block2mtd_dev *add_device(
+ 	dev->mtd.priv = dev;
+ 	dev->mtd.owner = THIS_MODULE;
+ 
+-	if (mtd_device_register(&dev->mtd, NULL, 0)) {
++	part = kzalloc(sizeof(struct mtd_partition), GFP_KERNEL);
++	part->name = name;
++	part->offset = 0;
++	part->size = dev->mtd.size;
++	if (mtd_device_register(&dev->mtd, part, 1)) {
+ 		/* Device didn't get added, so free the entry */
+ 		goto err_destroy_mutex;
+ 	}
+@@ -305,8 +314,7 @@ static struct block2mtd_dev *add_device(
+ 	list_add(&dev->list, &blkmtd_device_list);
+ 	pr_info("mtd%d: [%s] erase_size = %dKiB [%d]\n",
+ 		dev->mtd.index,
+-		dev->mtd.name + strlen("block2mtd: "),
+-		dev->mtd.erasesize >> 10, dev->mtd.erasesize);
++		mtdname, dev->mtd.erasesize >> 10, dev->mtd.erasesize);
+ 	return dev;
+ 
+ err_destroy_mutex:
+@@ -379,7 +387,7 @@ static int block2mtd_setup2(const char *
+ 	/* 80 for device, 12 for erase size, 80 for name, 8 for timeout */
+ 	char buf[80 + 12 + 80 + 8];
+ 	char *str = buf;
+-	char *token[2];
++	char *token[3];
+ 	char *name;
+ 	size_t erase_size = PAGE_SIZE;
+ 	unsigned long timeout = MTD_DEFAULT_TIMEOUT;
+@@ -393,7 +401,7 @@ static int block2mtd_setup2(const char *
+ 	strcpy(str, val);
+ 	kill_final_newline(str);
+ 
+-	for (i = 0; i < 2; i++)
++	for (i = 0; i < 3; i++)
+ 		token[i] = strsep(&str, ",");
+ 
+ 	if (str) {
+@@ -419,8 +427,10 @@ static int block2mtd_setup2(const char *
+ 			return 0;
+ 		}
+ 	}
++	if (token[2] && (strlen(token[2]) + 1 > 80))
++		pr_err("mtd device name too long\n");
+ 
+-	add_device(name, erase_size, timeout);
++	add_device(name, erase_size, token[2], timeout);
+ 
+ 	return 0;
+ }
+@@ -454,7 +464,7 @@ static int block2mtd_setup(const char *v
+ 
+ 
+ module_param_call(block2mtd, block2mtd_setup, NULL, NULL, 0200);
+-MODULE_PARM_DESC(block2mtd, "Device to use. \"block2mtd=<dev>[,<erasesize>]\"");
++MODULE_PARM_DESC(block2mtd, "Device to use. \"block2mtd=<dev>[,<erasesize>[,<name>]]\"");
+ 
+ static int __init block2mtd_init(void)
+ {
diff --git a/target/linux/generic/pending-5.4/441-block2mtd_probe.patch b/target/linux/generic/pending-5.4/441-block2mtd_probe.patch
new file mode 100644
index 0000000000..7e974e01ed
--- /dev/null
+++ b/target/linux/generic/pending-5.4/441-block2mtd_probe.patch
@@ -0,0 +1,47 @@
+From: Felix Fietkau <nbd@nbd.name>
+Subject: block2mtd
+
+Signed-off-by: Felix Fietkau <nbd@nbd.name>
+---
+ drivers/mtd/devices/block2mtd.c | 9 ++++++---
+ 1 file changed, 6 insertions(+), 3 deletions(-)
+
+--- a/drivers/mtd/devices/block2mtd.c
++++ b/drivers/mtd/devices/block2mtd.c
+@@ -387,7 +387,7 @@ static int block2mtd_setup2(const char *
+ 	/* 80 for device, 12 for erase size, 80 for name, 8 for timeout */
+ 	char buf[80 + 12 + 80 + 8];
+ 	char *str = buf;
+-	char *token[3];
++	char *token[4];
+ 	char *name;
+ 	size_t erase_size = PAGE_SIZE;
+ 	unsigned long timeout = MTD_DEFAULT_TIMEOUT;
+@@ -401,7 +401,7 @@ static int block2mtd_setup2(const char *
+ 	strcpy(str, val);
+ 	kill_final_newline(str);
+ 
+-	for (i = 0; i < 3; i++)
++	for (i = 0; i < 4; i++)
+ 		token[i] = strsep(&str, ",");
+ 
+ 	if (str) {
+@@ -430,6 +430,9 @@ static int block2mtd_setup2(const char *
+ 	if (token[2] && (strlen(token[2]) + 1 > 80))
+ 		pr_err("mtd device name too long\n");
+ 
++	if (token[3] && kstrtoul(token[3], 0, &timeout))
++		pr_err("invalid timeout\n");
++
+ 	add_device(name, erase_size, token[2], timeout);
+ 
+ 	return 0;
+@@ -464,7 +467,7 @@ static int block2mtd_setup(const char *v
+ 
+ 
+ module_param_call(block2mtd, block2mtd_setup, NULL, NULL, 0200);
+-MODULE_PARM_DESC(block2mtd, "Device to use. \"block2mtd=<dev>[,<erasesize>[,<name>]]\"");
++MODULE_PARM_DESC(block2mtd, "Device to use. \"block2mtd=<dev>[,<erasesize>[,<name>[,<timeout>]]]\"");
+ 
+ static int __init block2mtd_init(void)
+ {
diff --git a/target/linux/generic/pending-5.4/450-mtd-spi-nor-allow-NOR-driver-to-write-fewer-bytes-th.patch b/target/linux/generic/pending-5.4/450-mtd-spi-nor-allow-NOR-driver-to-write-fewer-bytes-th.patch
new file mode 100644
index 0000000000..6981c6d943
--- /dev/null
+++ b/target/linux/generic/pending-5.4/450-mtd-spi-nor-allow-NOR-driver-to-write-fewer-bytes-th.patch
@@ -0,0 +1,36 @@
+From: Felix Fietkau <nbd@nbd.name>
+Date: Thu, 22 Feb 2018 11:11:57 +0100
+Subject: [PATCH] mtd: spi-nor: allow NOR driver to write fewer bytes than
+ requested
+
+The write size can be constrained by the maximum message/transfer size
+of the SPI controller. Only check for ret = 0 to avoid an infinite loop.
+
+Signed-off-by: Felix Fietkau <nbd@nbd.name>
+---
+
+--- a/drivers/mtd/spi-nor/spi-nor.c
++++ b/drivers/mtd/spi-nor/spi-nor.c
+@@ -1457,7 +1457,7 @@ static int spi_nor_write(struct mtd_info
+ 
+ 		write_enable(nor);
+ 		ret = nor->write(nor, addr, page_remain, buf + i);
+-		if (ret < 0)
++		if (ret <= 0)
+ 			goto write_err;
+ 		written = ret;
+ 
+@@ -1466,13 +1466,6 @@ static int spi_nor_write(struct mtd_info
+ 			goto write_err;
+ 		*retlen += written;
+ 		i += written;
+-		if (written != page_remain) {
+-			dev_err(nor->dev,
+-				"While writing %zu bytes written %zd bytes\n",
+-				page_remain, written);
+-			ret = -EIO;
+-			goto write_err;
+-		}
+ 	}
+ 
+ write_err:
diff --git a/target/linux/generic/pending-5.4/460-mtd-cfi_cmdset_0002-no-erase_suspend.patch b/target/linux/generic/pending-5.4/460-mtd-cfi_cmdset_0002-no-erase_suspend.patch
new file mode 100644
index 0000000000..88d386302a
--- /dev/null
+++ b/target/linux/generic/pending-5.4/460-mtd-cfi_cmdset_0002-no-erase_suspend.patch
@@ -0,0 +1,25 @@
+From: Felix Fietkau <nbd@nbd.name>
+Subject: kernel: disable cfi cmdset 0002 erase suspend
+
+on some platforms, erase suspend leads to data corruption and lockups when write
+ops collide with erase ops. this has been observed on the buffalo wzr-hp-g300nh.
+rather than play whack-a-mole with a hard to reproduce issue on a variety of devices,
+simply disable erase suspend, as it will usually not produce any useful gain on
+the small filesystems used on embedded hardware.
+
+Signed-off-by: Felix Fietkau <nbd@nbd.name>
+---
+ drivers/mtd/chips/cfi_cmdset_0002.c | 2 +-
+ 1 file changed, 1 insertion(+), 1 deletion(-)
+
+--- a/drivers/mtd/chips/cfi_cmdset_0002.c
++++ b/drivers/mtd/chips/cfi_cmdset_0002.c
+@@ -812,7 +812,7 @@ static int get_chip(struct map_info *map
+ 		return 0;
+ 
+ 	case FL_ERASING:
+-		if (!cfip || !(cfip->EraseSuspend & (0x1|0x2)) ||
++		if (1 /* no suspend */ || !cfip || !(cfip->EraseSuspend & (0x1|0x2)) ||
+ 		    !(mode == FL_READY || mode == FL_POINT ||
+ 		    (mode == FL_WRITING && (cfip->EraseSuspend & 0x2))))
+ 			goto sleep;
diff --git a/target/linux/generic/pending-5.4/461-mtd-cfi_cmdset_0002-add-buffer-write-cmd-timeout.patch b/target/linux/generic/pending-5.4/461-mtd-cfi_cmdset_0002-add-buffer-write-cmd-timeout.patch
new file mode 100644
index 0000000000..1b07791eca
--- /dev/null
+++ b/target/linux/generic/pending-5.4/461-mtd-cfi_cmdset_0002-add-buffer-write-cmd-timeout.patch
@@ -0,0 +1,17 @@
+From: George Kashperko <george@znau.edu.ua>
+Subject: Issue map read after Write Buffer Load command to ensure chip is ready to receive data.
+
+Signed-off-by: George Kashperko <george@znau.edu.ua>
+---
+ drivers/mtd/chips/cfi_cmdset_0002.c |    1 +
+ 1 file changed, 1 insertion(+)
+--- a/drivers/mtd/chips/cfi_cmdset_0002.c
++++ b/drivers/mtd/chips/cfi_cmdset_0002.c
+@@ -1838,6 +1838,7 @@ static int __xipram do_write_buffer(stru
+ 
+ 	/* Write Buffer Load */
+ 	map_write(map, CMD(0x25), cmd_adr);
++	(void) map_read(map, cmd_adr);
+ 
+ 	chip->state = FL_WRITING_TO_BUFFER;
+ 
diff --git a/target/linux/generic/pending-5.4/465-m25p80-mx-disable-software-protection.patch b/target/linux/generic/pending-5.4/465-m25p80-mx-disable-software-protection.patch
new file mode 100644
index 0000000000..0c5d6cfa63
--- /dev/null
+++ b/target/linux/generic/pending-5.4/465-m25p80-mx-disable-software-protection.patch
@@ -0,0 +1,18 @@
+From: Felix Fietkau <nbd@nbd.name>
+Subject: Disable software protection bits for Macronix flashes.
+
+Signed-off-by: Felix Fietkau <nbd@nbd.name>
+---
+ drivers/mtd/spi-nor/spi-nor.c | 1 +
+ 1 file changed, 1 insertion(+)
+
+--- a/drivers/mtd/spi-nor/spi-nor.c
++++ b/drivers/mtd/spi-nor/spi-nor.c
+@@ -2735,6 +2735,7 @@ static int spi_nor_init(struct spi_nor *
+ 	 */
+ 	if (JEDEC_MFR(nor->info) == SNOR_MFR_ATMEL ||
+ 	    JEDEC_MFR(nor->info) == SNOR_MFR_INTEL ||
++	    JEDEC_MFR(nor->info) == SNOR_MFR_MACRONIX ||
+ 	    JEDEC_MFR(nor->info) == SNOR_MFR_SST ||
+ 	    nor->info->flags & SPI_NOR_HAS_LOCK) {
+ 		write_enable(nor);
diff --git a/target/linux/generic/pending-5.4/466-Revert-mtd-spi-nor-fix-Spansion-regressions-aliased-.patch b/target/linux/generic/pending-5.4/466-Revert-mtd-spi-nor-fix-Spansion-regressions-aliased-.patch
new file mode 100644
index 0000000000..fb6ae7df7b
--- /dev/null
+++ b/target/linux/generic/pending-5.4/466-Revert-mtd-spi-nor-fix-Spansion-regressions-aliased-.patch
@@ -0,0 +1,37 @@
+From: Matthias Schiffer <mschiffer@universe-factory.net>
+Date: Tue, 9 Jan 2018 20:41:48 +0100
+Subject: [PATCH] Revert "mtd: spi-nor: fix Spansion regressions (aliased with
+ Winbond)"
+
+This reverts commit 67b9bcd36906e12a15ffec19463afbbd6a41660e.
+
+The underlying issue breaking Spansion flash has been fixed with "mtd: spi-nor:
+wait until lock/unlock operations are ready" and "mtd: spi-nor: wait for SR_WIP
+to clear on initial unlock", so we can support unlocking for Winbond flash
+again.
+
+Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net>
+---
+ drivers/mtd/spi-nor/spi-nor.c | 4 +++-
+ 1 file changed, 3 insertions(+), 1 deletion(-)
+
+--- a/drivers/mtd/spi-nor/spi-nor.c
++++ b/drivers/mtd/spi-nor/spi-nor.c
+@@ -2737,6 +2737,7 @@ static int spi_nor_init(struct spi_nor *
+ 	    JEDEC_MFR(nor->info) == SNOR_MFR_INTEL ||
+ 	    JEDEC_MFR(nor->info) == SNOR_MFR_MACRONIX ||
+ 	    JEDEC_MFR(nor->info) == SNOR_MFR_SST ||
++	    JEDEC_MFR(nor->info) == SNOR_MFR_WINBOND ||
+ 	    nor->info->flags & SPI_NOR_HAS_LOCK) {
+ 		write_enable(nor);
+ 		write_sr(nor, 0);
+@@ -2873,7 +2874,8 @@ int spi_nor_scan(struct spi_nor *nor, co
+ 
+ 	/* NOR protection support for STmicro/Micron chips and similar */
+ 	if (JEDEC_MFR(info) == SNOR_MFR_MICRON ||
+-			info->flags & SPI_NOR_HAS_LOCK) {
++	    JEDEC_MFR(info) == SNOR_MFR_WINBOND ||
++	    info->flags & SPI_NOR_HAS_LOCK) {
+ 		nor->flash_lock = stm_lock;
+ 		nor->flash_unlock = stm_unlock;
+ 		nor->flash_is_locked = stm_is_locked;
diff --git a/target/linux/generic/pending-5.4/470-mtd-spi-nor-support-limiting-4K-sectors-support-base.patch b/target/linux/generic/pending-5.4/470-mtd-spi-nor-support-limiting-4K-sectors-support-base.patch
new file mode 100644
index 0000000000..12d785856a
--- /dev/null
+++ b/target/linux/generic/pending-5.4/470-mtd-spi-nor-support-limiting-4K-sectors-support-base.patch
@@ -0,0 +1,56 @@
+From: Felix Fietkau <nbd@nbd.name>
+Date: Sat, 4 Nov 2017 07:40:23 +0100
+Subject: [PATCH] mtd: spi-nor: support limiting 4K sectors support based on
+ flash size
+
+Some devices need 4K sectors to be able to deal with small flash chips.
+For instance, w25x05 is 64 KiB in size, and without 4K sectors, the
+entire chip is just one erase block.
+On bigger flash chip sizes, using 4K sectors can significantly slow down
+many operations, including using a writable filesystem. There are several
+platforms where it makes sense to use a single kernel on both kinds of
+devices.
+
+To support this properly, allow configuring an upper flash chip size
+limit for 4K sectors support.
+
+Signed-off-by: Felix Fietkau <nbd@nbd.name>
+---
+
+--- a/drivers/mtd/spi-nor/Kconfig
++++ b/drivers/mtd/spi-nor/Kconfig
+@@ -39,6 +39,17 @@ config SPI_ASPEED_SMC
+ 	  and support for the SPI flash memory controller (SPI) for
+ 	  the host firmware. The implementation only supports SPI NOR.
+ 
++config MTD_SPI_NOR_USE_4K_SECTORS_LIMIT
++	int "Maximum flash chip size to use 4K sectors on (in KiB)"
++	depends on MTD_SPI_NOR_USE_4K_SECTORS
++	default "4096"
++	help
++	  There are many flash chips that support 4K sectors, but are so large
++	  that using them significantly slows down writing large amounts of
++	  data or using a writable filesystem.
++	  Any flash chip larger than the size specified in this option will
++	  not use 4K sectors.
++
+ config SPI_ATMEL_QUADSPI
+ 	tristate "Atmel Quad SPI Controller"
+ 	depends on ARCH_AT91 || (ARM && COMPILE_TEST && !ARCH_EBSA110)
+--- a/drivers/mtd/spi-nor/spi-nor.c
++++ b/drivers/mtd/spi-nor/spi-nor.c
+@@ -2649,10 +2649,12 @@ static int spi_nor_select_erase(struct s
+ 
+ #ifdef CONFIG_MTD_SPI_NOR_USE_4K_SECTORS
+ 	/* prefer "small sector" erase if possible */
+-	if (info->flags & SECT_4K) {
++	if ((info->flags & SECT_4K) && (mtd->size <=
++	    CONFIG_MTD_SPI_NOR_USE_4K_SECTORS_LIMIT * 1024)) {
+ 		nor->erase_opcode = SPINOR_OP_BE_4K;
+ 		mtd->erasesize = 4096;
+-	} else if (info->flags & SECT_4K_PMC) {
++	} else if ((info->flags & SECT_4K_PMC) && (mtd->size <=
++		   CONFIG_MTD_SPI_NOR_USE_4K_SECTORS_LIMIT * 1024)) {
+ 		nor->erase_opcode = SPINOR_OP_BE_4K_PMC;
+ 		mtd->erasesize = 4096;
+ 	} else
diff --git a/target/linux/generic/pending-5.4/475-mtd-spi-nor-Add-Winbond-w25q128jv-support.patch b/target/linux/generic/pending-5.4/475-mtd-spi-nor-Add-Winbond-w25q128jv-support.patch
new file mode 100644
index 0000000000..72c4470332
--- /dev/null
+++ b/target/linux/generic/pending-5.4/475-mtd-spi-nor-Add-Winbond-w25q128jv-support.patch
@@ -0,0 +1,34 @@
+From: Robert Marko <robimarko@gmail.com>
+To: linux-mtd@lists.infradead.org
+Subject: mtd: spi-nor: Add Winbond w25q128jv support
+Date: Mon, 25 Jun 2018 13:17:48 +0200
+
+Datasheet:
+http://www.winbond.com/resource-files/w25q128jv%20revf%2003272018%20plus.pdf
+
+Testing done on Mikrotik Routerboard  wAP R board.
+It does not support Dual or Quad modes.
+
+Signed-off-by: Robert Marko <robimarko@gmail.com>
+---
+
+Changes in v2:
+	- Correct the title
+---
+ drivers/mtd/spi-nor/spi-nor.c | 5 +++++
+ 1 file changed, 5 insertions(+)
+
+--- a/drivers/mtd/spi-nor/spi-nor.c
++++ b/drivers/mtd/spi-nor/spi-nor.c
+@@ -1241,6 +1241,11 @@ static const struct flash_info spi_nor_i
+ 			SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ |
+ 			SPI_NOR_HAS_LOCK | SPI_NOR_HAS_TB)
+ 	},
++	{
++		"w25q128jv", INFO(0xef7018, 0, 64 * 1024, 256,
++			SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ |
++			SPI_NOR_HAS_LOCK | SPI_NOR_HAS_TB)
++	},
+ 	{ "w25q80", INFO(0xef5014, 0, 64 * 1024,  16, SECT_4K) },
+ 	{ "w25q80bl", INFO(0xef4014, 0, 64 * 1024,  16, SECT_4K) },
+ 	{ "w25q128", INFO(0xef4018, 0, 64 * 1024, 256, SECT_4K) },
diff --git a/target/linux/generic/pending-5.4/476-mtd-spi-nor-add-eon-en25q128.patch b/target/linux/generic/pending-5.4/476-mtd-spi-nor-add-eon-en25q128.patch
new file mode 100644
index 0000000000..69ac17ce4c
--- /dev/null
+++ b/target/linux/generic/pending-5.4/476-mtd-spi-nor-add-eon-en25q128.patch
@@ -0,0 +1,18 @@
+From: Piotr Dymacz <pepe2k@gmail.com>
+Subject: kernel/mtd: add support for EON EN25Q128
+
+Signed-off-by: Piotr Dymacz <pepe2k@gmail.com>
+---
+ drivers/mtd/spi-nor/spi-nor.c | 1 +
+ 1 file changed, 1 insertion(+)
+
+--- a/drivers/mtd/spi-nor/spi-nor.c
++++ b/drivers/mtd/spi-nor/spi-nor.c
+@@ -994,6 +994,7 @@ static const struct flash_info spi_nor_i
+ 	{ "en25q32b",   INFO(0x1c3016, 0, 64 * 1024,   64, 0) },
+ 	{ "en25p64",    INFO(0x1c2017, 0, 64 * 1024,  128, 0) },
+ 	{ "en25q64",    INFO(0x1c3017, 0, 64 * 1024,  128, SECT_4K) },
++	{ "en25q128",   INFO(0x1c3018, 0, 64 * 1024,  256, SECT_4K) },
+ 	{ "en25qh32",   INFO(0x1c7016, 0, 64 * 1024,   64, 0) },
+ 	{ "en25qh128",  INFO(0x1c7018, 0, 64 * 1024,  256, 0) },
+ 	{ "en25qh256",  INFO(0x1c7019, 0, 64 * 1024,  512, 0) },
diff --git a/target/linux/generic/pending-5.4/477-mtd-add-spi-nor-add-mx25u3235f.patch b/target/linux/generic/pending-5.4/477-mtd-add-spi-nor-add-mx25u3235f.patch
new file mode 100644
index 0000000000..0648b12e12
--- /dev/null
+++ b/target/linux/generic/pending-5.4/477-mtd-add-spi-nor-add-mx25u3235f.patch
@@ -0,0 +1,18 @@
+From: André Valentin <avalentin@marcant.net>
+Subject: linux/mtd: add id for mx25u3235f needed by ZyXEL NBG6817
+
+Signed-off-by: André Valentin <avalentin@marcant.net>
+---
+ drivers/mtd/spi-nor/spi-nor.c | 1 +
+ 1 file changed, 1 insertion(+)
+
+--- a/drivers/mtd/spi-nor/spi-nor.c
++++ b/drivers/mtd/spi-nor/spi-nor.c
+@@ -1083,6 +1083,7 @@ static const struct flash_info spi_nor_i
+ 	{ "mx25l3205d",  INFO(0xc22016, 0, 64 * 1024,  64, SECT_4K) },
+ 	{ "mx25l3255e",  INFO(0xc29e16, 0, 64 * 1024,  64, SECT_4K) },
+ 	{ "mx25l6405d",  INFO(0xc22017, 0, 64 * 1024, 128, SECT_4K) },
++	{ "mx25u3235f",	 INFO(0xc22536, 0, 64 * 1024, 64, 0) },
+ 	{ "mx25u2033e",  INFO(0xc22532, 0, 64 * 1024,   4, SECT_4K) },
+ 	{ "mx25u4035",   INFO(0xc22533, 0, 64 * 1024,   8, SECT_4K) },
+ 	{ "mx25u8035",   INFO(0xc22534, 0, 64 * 1024,  16, SECT_4K) },
diff --git a/target/linux/generic/pending-5.4/479-mtd-spi-nor-add-eon-en25qh64.patch b/target/linux/generic/pending-5.4/479-mtd-spi-nor-add-eon-en25qh64.patch
new file mode 100644
index 0000000000..6bb7754733
--- /dev/null
+++ b/target/linux/generic/pending-5.4/479-mtd-spi-nor-add-eon-en25qh64.patch
@@ -0,0 +1,10 @@
+--- a/drivers/mtd/spi-nor/spi-nor.c
++++ b/drivers/mtd/spi-nor/spi-nor.c
+@@ -996,6 +996,7 @@ static const struct flash_info spi_nor_i
+ 	{ "en25q64",    INFO(0x1c3017, 0, 64 * 1024,  128, SECT_4K) },
+ 	{ "en25q128",   INFO(0x1c3018, 0, 64 * 1024,  256, SECT_4K) },
+ 	{ "en25qh32",   INFO(0x1c7016, 0, 64 * 1024,   64, 0) },
++	{ "en25qh64",   INFO(0x1c7017, 0, 64 * 1024,   128, 0) },
+ 	{ "en25qh128",  INFO(0x1c7018, 0, 64 * 1024,  256, 0) },
+ 	{ "en25qh256",  INFO(0x1c7019, 0, 64 * 1024,  512, 0) },
+ 	{ "en25s64",	INFO(0x1c3817, 0, 64 * 1024,  128, SECT_4K) },
diff --git a/target/linux/generic/pending-5.4/479-mtd-spi-nor-add-xtx-xt25f128b.patch b/target/linux/generic/pending-5.4/479-mtd-spi-nor-add-xtx-xt25f128b.patch
new file mode 100644
index 0000000000..664837928b
--- /dev/null
+++ b/target/linux/generic/pending-5.4/479-mtd-spi-nor-add-xtx-xt25f128b.patch
@@ -0,0 +1,42 @@
+From patchwork Thu Feb  6 17:19:41 2020
+Content-Type: text/plain; charset="utf-8"
+MIME-Version: 1.0
+Content-Transfer-Encoding: 7bit
+X-Patchwork-Submitter: Daniel Golle <daniel@makrotopia.org>
+X-Patchwork-Id: 1234465
+Date: Thu, 6 Feb 2020 19:19:41 +0200
+From: Daniel Golle <daniel@makrotopia.org>
+To: linux-mtd@lists.infradead.org
+Subject: [PATCH v2] mtd: spi-nor: Add support for xt25f128b chip
+Message-ID: <20200206171941.GA2398@makrotopia.org>
+MIME-Version: 1.0
+Content-Disposition: inline
+List-Subscribe: <http://lists.infradead.org/mailman/listinfo/linux-mtd>,
+ <mailto:linux-mtd-request@lists.infradead.org?subject=subscribe>
+Cc: Eitan Cohen <eitan@neot-semadar.com>, Piotr Dymacz <pepe2k@gmail.com>,
+ Tudor Ambarus <tudor.ambarus@microchip.com>
+Sender: "linux-mtd" <linux-mtd-bounces@lists.infradead.org>
+Errors-To: linux-mtd-bounces+incoming=patchwork.ozlabs.org@lists.infradead.org
+
+Add XT25F128B made by XTX Technology (Shenzhen) Limited.
+This chip supports dual and quad read and uniform 4K-byte erase.
+Verified on Teltonika RUT955 which comes with XT25F128B in recent
+versions of the device.
+
+Signed-off-by: Daniel Golle <daniel@makrotopia.org>
+---
+ drivers/mtd/spi-nor/spi-nor.c | 4 ++++
+ 1 file changed, 4 insertions(+)
+
+--- a/drivers/mtd/spi-nor/spi-nor.c
++++ b/drivers/mtd/spi-nor/spi-nor.c
+@@ -1273,6 +1273,9 @@ static const struct flash_info spi_nor_i
+ 	/* XMC (Wuhan Xinxin Semiconductor Manufacturing Corp.) */
+ 	{ "XM25QH64A", INFO(0x207017, 0, 64 * 1024, 128, SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ) },
+ 	{ "XM25QH128A", INFO(0x207018, 0, 64 * 1024, 256, SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ) },
++
++	/* XTX Technology (Shenzhen) Limited */
++	{ "xt25f128b", INFO(0x0B4018, 0, 64 * 1024, 256, SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ) },
+ 	{ },
+ };
+ 
diff --git a/target/linux/generic/pending-5.4/480-mtd-set-rootfs-to-be-root-dev.patch b/target/linux/generic/pending-5.4/480-mtd-set-rootfs-to-be-root-dev.patch
new file mode 100644
index 0000000000..dce0432fac
--- /dev/null
+++ b/target/linux/generic/pending-5.4/480-mtd-set-rootfs-to-be-root-dev.patch
@@ -0,0 +1,38 @@
+From: Gabor Juhos <juhosg@openwrt.org>
+Subject: kernel/3.1[02]: move MTD root device setup code to mtdcore
+
+The current code only allows to automatically set
+root device on MTD partitions. Move the code to MTD
+core to allow to use it with all MTD devices.
+
+Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
+---
+ drivers/mtd/mtdcore.c | 10 ++++++++++
+ 1 file changed, 10 insertions(+)
+
+--- a/drivers/mtd/mtdcore.c
++++ b/drivers/mtd/mtdcore.c
+@@ -41,6 +41,7 @@
+ #include <linux/reboot.h>
+ #include <linux/leds.h>
+ #include <linux/debugfs.h>
++#include <linux/root_dev.h>
+ 
+ #include <linux/mtd/mtd.h>
+ #include <linux/mtd/partitions.h>
+@@ -593,6 +594,15 @@ int add_mtd_device(struct mtd_info *mtd)
+ 	   of this try_ nonsense, and no bitching about it
+ 	   either. :) */
+ 	__module_get(THIS_MODULE);
++
++	if (!strcmp(mtd->name, "rootfs") &&
++	    IS_ENABLED(CONFIG_MTD_ROOTFS_ROOT_DEV) &&
++	    ROOT_DEV == 0) {
++		pr_notice("mtd: device %d (%s) set to be root filesystem\n",
++			  mtd->index, mtd->name);
++		ROOT_DEV = MKDEV(MTD_BLOCK_MAJOR, mtd->index);
++	}
++
+ 	return 0;
+ 
+ fail_added:
diff --git a/target/linux/generic/pending-5.4/490-ubi-auto-attach-mtd-device-named-ubi-or-data-on-boot.patch b/target/linux/generic/pending-5.4/490-ubi-auto-attach-mtd-device-named-ubi-or-data-on-boot.patch
new file mode 100644
index 0000000000..79d18d036f
--- /dev/null
+++ b/target/linux/generic/pending-5.4/490-ubi-auto-attach-mtd-device-named-ubi-or-data-on-boot.patch
@@ -0,0 +1,97 @@
+From: Daniel Golle <daniel@makrotopia.org>
+Subject: ubi: auto-attach mtd device named "ubi" or "data" on boot
+
+Signed-off-by: Daniel Golle <daniel@makrotopia.org>
+---
+ drivers/mtd/ubi/build.c | 36 ++++++++++++++++++++++++++++++++++++
+ 1 file changed, 36 insertions(+)
+
+--- a/drivers/mtd/ubi/build.c
++++ b/drivers/mtd/ubi/build.c
+@@ -1181,6 +1181,73 @@ static struct mtd_info * __init open_mtd
+ 	return mtd;
+ }
+ 
++/*
++ * This function tries attaching mtd partitions named either "ubi" or "data"
++ * during boot.
++ */
++static void __init ubi_auto_attach(void)
++{
++	int err;
++	struct mtd_info *mtd;
++	loff_t offset = 0;
++	size_t len;
++	char magic[4];
++
++	/* try attaching mtd device named "ubi" or "data" */
++	mtd = open_mtd_device("ubi");
++	if (IS_ERR(mtd))
++		mtd = open_mtd_device("data");
++
++	if (IS_ERR(mtd))
++		return;
++
++	/* get the first not bad block */
++	if (mtd_can_have_bb(mtd))
++		while (mtd_block_isbad(mtd, offset)) {
++			offset += mtd->erasesize;
++
++			if (offset > mtd->size) {
++				pr_err("UBI error: Failed to find a non-bad "
++				       "block on mtd%d\n", mtd->index);
++				goto cleanup;
++			}
++		}
++
++	/* check if the read from flash was successful */
++	err = mtd_read(mtd, offset, 4, &len, (void *) magic);
++	if ((err && !mtd_is_bitflip(err)) || len != 4) {
++		pr_err("UBI error: unable to read from mtd%d\n", mtd->index);
++		goto cleanup;
++	}
++
++	/* check for a valid ubi magic */
++	if (strncmp(magic, "UBI#", 4)) {
++		pr_err("UBI error: no valid UBI magic found inside mtd%d\n", mtd->index);
++		goto cleanup;
++	}
++
++	/* don't auto-add media types where UBI doesn't makes sense */
++	if (mtd->type != MTD_NANDFLASH &&
++	    mtd->type != MTD_NORFLASH &&
++	    mtd->type != MTD_DATAFLASH &&
++	    mtd->type != MTD_MLCNANDFLASH)
++		goto cleanup;
++
++	mutex_lock(&ubi_devices_mutex);
++	pr_notice("UBI: auto-attach mtd%d\n", mtd->index);
++	err = ubi_attach_mtd_dev(mtd, UBI_DEV_NUM_AUTO, 0, 0);
++	mutex_unlock(&ubi_devices_mutex);
++	if (err < 0) {
++		pr_err("UBI error: cannot attach mtd%d\n", mtd->index);
++		goto cleanup;
++	}
++
++	return;
++
++cleanup:
++	put_mtd_device(mtd);
++}
++
+ static int __init ubi_init(void)
+ {
+ 	int err, i, k;
+@@ -1264,6 +1331,12 @@ static int __init ubi_init(void)
+ 		}
+ 	}
+ 
++	/* auto-attach mtd devices only if built-in to the kernel and no ubi.mtd
++	 * parameter was given */
++	if (IS_ENABLED(CONFIG_MTD_ROOTFS_ROOT_DEV) &&
++	    !ubi_is_module() && !mtd_devs)
++		ubi_auto_attach();
++
+ 	err = ubiblock_init();
+ 	if (err) {
+ 		pr_err("UBI error: block: cannot initialize, error %d\n", err);
diff --git a/target/linux/generic/pending-5.4/491-ubi-auto-create-ubiblock-device-for-rootfs.patch b/target/linux/generic/pending-5.4/491-ubi-auto-create-ubiblock-device-for-rootfs.patch
new file mode 100644
index 0000000000..cb2d525610
--- /dev/null
+++ b/target/linux/generic/pending-5.4/491-ubi-auto-create-ubiblock-device-for-rootfs.patch
@@ -0,0 +1,66 @@
+From: Daniel Golle <daniel@makrotopia.org>
+Subject: ubi: auto-create ubiblock device for rootfs
+
+Signed-off-by: Daniel Golle <daniel@makrotopia.org>
+---
+ drivers/mtd/ubi/block.c | 42 ++++++++++++++++++++++++++++++++++++++++++
+ 1 file changed, 42 insertions(+)
+
+--- a/drivers/mtd/ubi/block.c
++++ b/drivers/mtd/ubi/block.c
+@@ -633,6 +633,44 @@ static void __init ubiblock_create_from_
+ 	}
+ }
+ 
++#define UBIFS_NODE_MAGIC  0x06101831
++static inline int ubi_vol_is_ubifs(struct ubi_volume_desc *desc)
++{
++	int ret;
++	uint32_t magic_of, magic;
++	ret = ubi_read(desc, 0, (char *)&magic_of, 0, 4);
++	if (ret)
++		return 0;
++	magic = le32_to_cpu(magic_of);
++	return magic == UBIFS_NODE_MAGIC;
++}
++
++static void __init ubiblock_create_auto_rootfs(void)
++{
++	int ubi_num, ret, is_ubifs;
++	struct ubi_volume_desc *desc;
++	struct ubi_volume_info vi;
++
++	for (ubi_num = 0; ubi_num < UBI_MAX_DEVICES; ubi_num++) {
++		desc = ubi_open_volume_nm(ubi_num, "rootfs", UBI_READONLY);
++		if (IS_ERR(desc))
++			continue;
++
++		ubi_get_volume_info(desc, &vi);
++		is_ubifs = ubi_vol_is_ubifs(desc);
++		ubi_close_volume(desc);
++		if (is_ubifs)
++			break;
++
++		ret = ubiblock_create(&vi);
++		if (ret)
++			pr_err("UBI error: block: can't add '%s' volume, err=%d\n",
++				vi.name, ret);
++		/* always break if we get here */
++		break;
++	}
++}
++
+ static void ubiblock_remove_all(void)
+ {
+ 	struct ubiblock *next;
+@@ -665,6 +703,10 @@ int __init ubiblock_init(void)
+ 	 */
+ 	ubiblock_create_from_param();
+ 
++	/* auto-attach "rootfs" volume if existing and non-ubifs */
++	if (IS_ENABLED(CONFIG_MTD_ROOTFS_ROOT_DEV))
++		ubiblock_create_auto_rootfs();
++
+ 	/*
+ 	 * Block devices are only created upon user requests, so we ignore
+ 	 * existing volumes.
diff --git a/target/linux/generic/pending-5.4/492-try-auto-mounting-ubi0-rootfs-in-init-do_mounts.c.patch b/target/linux/generic/pending-5.4/492-try-auto-mounting-ubi0-rootfs-in-init-do_mounts.c.patch
new file mode 100644
index 0000000000..b76e83e4a3
--- /dev/null
+++ b/target/linux/generic/pending-5.4/492-try-auto-mounting-ubi0-rootfs-in-init-do_mounts.c.patch
@@ -0,0 +1,51 @@
+From: Daniel Golle <daniel@makrotopia.org>
+Subject: try auto-mounting ubi0:rootfs in init/do_mounts.c
+
+Signed-off-by: Daniel Golle <daniel@makrotopia.org>
+---
+ init/do_mounts.c | 26 +++++++++++++++++++++++++-
+ 1 file changed, 25 insertions(+), 1 deletion(-)
+
+--- a/init/do_mounts.c
++++ b/init/do_mounts.c
+@@ -427,7 +427,28 @@ retry:
+ out:
+ 	put_page(page);
+ }
+- 
++
++static int __init mount_ubi_rootfs(void)
++{
++	int flags = MS_SILENT;
++	int err, tried = 0;
++
++	while (tried < 2) {
++		err = do_mount_root("ubi0:rootfs", "ubifs", flags, \
++					root_mount_data);
++		switch (err) {
++			case -EACCES:
++				flags |= MS_RDONLY;
++				tried++;
++				break;
++			default:
++				return err;
++		}
++	}
++
++	return -EINVAL;
++}
++
+ #ifdef CONFIG_ROOT_NFS
+ 
+ #define NFSROOT_TIMEOUT_MIN	5
+@@ -521,6 +542,10 @@ void __init mount_root(void)
+ 			change_floppy("root floppy");
+ 	}
+ #endif
++#ifdef CONFIG_MTD_ROOTFS_ROOT_DEV
++	if (!mount_ubi_rootfs())
++		return;
++#endif
+ #ifdef CONFIG_BLOCK
+ 	{
+ 		int err = create_dev("/dev/root", ROOT_DEV);
diff --git a/target/linux/generic/pending-5.4/493-ubi-set-ROOT_DEV-to-ubiblock-rootfs-if-unset.patch b/target/linux/generic/pending-5.4/493-ubi-set-ROOT_DEV-to-ubiblock-rootfs-if-unset.patch
new file mode 100644
index 0000000000..1bb53ada7f
--- /dev/null
+++ b/target/linux/generic/pending-5.4/493-ubi-set-ROOT_DEV-to-ubiblock-rootfs-if-unset.patch
@@ -0,0 +1,34 @@
+From: Daniel Golle <daniel@makrotopia.org>
+Subject: ubi: set ROOT_DEV to ubiblock "rootfs" if unset
+
+Signed-off-by: Daniel Golle <daniel@makrotopia.org>
+---
+ drivers/mtd/ubi/block.c | 10 ++++++++++
+ 1 file changed, 10 insertions(+)
+
+--- a/drivers/mtd/ubi/block.c
++++ b/drivers/mtd/ubi/block.c
+@@ -50,6 +50,7 @@
+ #include <linux/scatterlist.h>
+ #include <linux/idr.h>
+ #include <asm/div64.h>
++#include <linux/root_dev.h>
+ 
+ #include "ubi-media.h"
+ #include "ubi.h"
+@@ -445,6 +446,15 @@ int ubiblock_create(struct ubi_volume_in
+ 	dev_info(disk_to_dev(dev->gd), "created from ubi%d:%d(%s)",
+ 		 dev->ubi_num, dev->vol_id, vi->name);
+ 	mutex_unlock(&devices_mutex);
++
++	if (!strcmp(vi->name, "rootfs") &&
++	    IS_ENABLED(CONFIG_MTD_ROOTFS_ROOT_DEV) &&
++	    ROOT_DEV == 0) {
++		pr_notice("ubiblock: device ubiblock%d_%d (%s) set to be root filesystem\n",
++			  dev->ubi_num, dev->vol_id, vi->name);
++		ROOT_DEV = MKDEV(gd->major, gd->first_minor);
++	}
++
+ 	return 0;
+ 
+ out_free_queue:
diff --git a/target/linux/generic/pending-5.4/494-mtd-ubi-add-EOF-marker-support.patch b/target/linux/generic/pending-5.4/494-mtd-ubi-add-EOF-marker-support.patch
new file mode 100644
index 0000000000..e38f11e592
--- /dev/null
+++ b/target/linux/generic/pending-5.4/494-mtd-ubi-add-EOF-marker-support.patch
@@ -0,0 +1,60 @@
+From: Gabor Juhos <juhosg@openwrt.org>
+Subject: mtd: add EOF marker support to the UBI layer
+
+Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
+---
+ drivers/mtd/ubi/attach.c | 25 ++++++++++++++++++++++---
+ drivers/mtd/ubi/ubi.h    |  1 +
+ 2 files changed, 23 insertions(+), 3 deletions(-)
+
+--- a/drivers/mtd/ubi/attach.c
++++ b/drivers/mtd/ubi/attach.c
+@@ -939,6 +939,13 @@ static bool vol_ignored(int vol_id)
+ #endif
+ }
+ 
++static bool ec_hdr_has_eof(struct ubi_ec_hdr *ech)
++{
++	return ech->padding1[0] == 'E' &&
++	       ech->padding1[1] == 'O' &&
++	       ech->padding1[2] == 'F';
++}
++
+ /**
+  * scan_peb - scan and process UBI headers of a PEB.
+  * @ubi: UBI device description object
+@@ -971,9 +978,21 @@ static int scan_peb(struct ubi_device *u
+ 		return 0;
+ 	}
+ 
+-	err = ubi_io_read_ec_hdr(ubi, pnum, ech, 0);
+-	if (err < 0)
+-		return err;
++	if (!ai->eof_found) {
++		err = ubi_io_read_ec_hdr(ubi, pnum, ech, 0);
++		if (err < 0)
++			return err;
++
++		if (ec_hdr_has_eof(ech)) {
++			pr_notice("UBI: EOF marker found, PEBs from %d will be erased\n",
++				pnum);
++			ai->eof_found = true;
++		}
++	}
++
++	if (ai->eof_found)
++		err = UBI_IO_FF_BITFLIPS;
++
+ 	switch (err) {
+ 	case 0:
+ 		break;
+--- a/drivers/mtd/ubi/ubi.h
++++ b/drivers/mtd/ubi/ubi.h
+@@ -789,6 +789,7 @@ struct ubi_attach_info {
+ 	int mean_ec;
+ 	uint64_t ec_sum;
+ 	int ec_count;
++	bool eof_found;
+ 	struct kmem_cache *aeb_slab_cache;
+ 	struct ubi_ec_hdr *ech;
+ 	struct ubi_vid_io_buf *vidb;
diff --git a/target/linux/generic/pending-5.4/495-mtd-core-add-get_mtd_device_by_node.patch b/target/linux/generic/pending-5.4/495-mtd-core-add-get_mtd_device_by_node.patch
new file mode 100644
index 0000000000..1446ca2abc
--- /dev/null
+++ b/target/linux/generic/pending-5.4/495-mtd-core-add-get_mtd_device_by_node.patch
@@ -0,0 +1,75 @@
+From 1bd1b740f208d1cf4071932cc51860d37266c402 Mon Sep 17 00:00:00 2001
+From: Bernhard Frauendienst <kernel@nospam.obeliks.de>
+Date: Sat, 1 Sep 2018 00:30:11 +0200
+Subject: [PATCH 495/497] mtd: core: add get_mtd_device_by_node
+
+Add function to retrieve a mtd device by its OF node. Since drivers can
+assign arbitrary names to mtd devices in the absence of a label
+property, there is no other reliable way to retrieve a mtd device for a
+given OF node.
+
+Signed-off-by: Bernhard Frauendienst <kernel@nospam.obeliks.de>
+Reviewed-by: Miquel Raynal <miquel.raynal@bootlin.com>
+---
+ drivers/mtd/mtdcore.c   | 38 ++++++++++++++++++++++++++++++++++++++
+ include/linux/mtd/mtd.h |  2 ++
+ 2 files changed, 40 insertions(+)
+
+--- a/drivers/mtd/mtdcore.c
++++ b/drivers/mtd/mtdcore.c
+@@ -938,6 +938,44 @@ out_unlock:
+ }
+ EXPORT_SYMBOL_GPL(get_mtd_device_nm);
+ 
++/**
++ *	get_mtd_device_by_node - obtain a validated handle for an MTD device
++ *	by of_node
++ *	@of_node: OF node of MTD device to open
++ *
++ *	This function returns MTD device description structure in case of
++ *	success and an error code in case of failure.
++ */
++struct mtd_info *get_mtd_device_by_node(const struct device_node *of_node)
++{
++	int err = -ENODEV;
++	struct mtd_info *mtd = NULL, *other;
++
++	mutex_lock(&mtd_table_mutex);
++
++	mtd_for_each_device(other) {
++		if (of_node == other->dev.of_node) {
++			mtd = other;
++			break;
++		}
++	}
++
++	if (!mtd)
++		goto out_unlock;
++
++	err = __get_mtd_device(mtd);
++	if (err)
++		goto out_unlock;
++
++	mutex_unlock(&mtd_table_mutex);
++	return mtd;
++
++out_unlock:
++	mutex_unlock(&mtd_table_mutex);
++	return ERR_PTR(err);
++}
++EXPORT_SYMBOL_GPL(get_mtd_device_by_node);
++
+ void put_mtd_device(struct mtd_info *mtd)
+ {
+ 	mutex_lock(&mtd_table_mutex);
+--- a/include/linux/mtd/mtd.h
++++ b/include/linux/mtd/mtd.h
+@@ -589,6 +589,8 @@ extern struct mtd_info *get_mtd_device(s
+ extern int __get_mtd_device(struct mtd_info *mtd);
+ extern void __put_mtd_device(struct mtd_info *mtd);
+ extern struct mtd_info *get_mtd_device_nm(const char *name);
++extern struct mtd_info *get_mtd_device_by_node(
++		const struct device_node *of_node);
+ extern void put_mtd_device(struct mtd_info *mtd);
+ 
+ 
diff --git a/target/linux/generic/pending-5.4/496-dt-bindings-add-bindings-for-mtd-concat-devices.patch b/target/linux/generic/pending-5.4/496-dt-bindings-add-bindings-for-mtd-concat-devices.patch
new file mode 100644
index 0000000000..01f3b9ec2d
--- /dev/null
+++ b/target/linux/generic/pending-5.4/496-dt-bindings-add-bindings-for-mtd-concat-devices.patch
@@ -0,0 +1,52 @@
+From 5734c6669fba7ddb5ef491ccff7159d15dba0b59 Mon Sep 17 00:00:00 2001
+From: Bernhard Frauendienst <kernel@nospam.obeliks.de>
+Date: Wed, 5 Sep 2018 01:32:51 +0200
+Subject: [PATCH 496/497] dt-bindings: add bindings for mtd-concat devices
+
+Document virtual mtd-concat device bindings.
+
+Signed-off-by: Bernhard Frauendienst <kernel@nospam.obeliks.de>
+---
+ .../devicetree/bindings/mtd/mtd-concat.txt    | 36 +++++++++++++++++++
+ 1 file changed, 36 insertions(+)
+ create mode 100644 Documentation/devicetree/bindings/mtd/mtd-concat.txt
+
+--- /dev/null
++++ b/Documentation/devicetree/bindings/mtd/mtd-concat.txt
+@@ -0,0 +1,36 @@
++Virtual MTD concat device
++
++Requires properties:
++- devices: list of phandles to mtd nodes that should be concatenated
++
++Example:
++
++&spi {
++	flash0: flash@0 {
++		...
++	};
++	flash1: flash@1 {
++		...
++	};
++};
++
++flash {
++	compatible = "mtd-concat";
++
++	devices = <&flash0 &flash1>;
++
++	partitions {
++		compatible = "fixed-partitions";
++
++		partition@0 {
++			label = "boot";
++			reg = <0x0000000 0x0040000>;
++			read-only;
++		};
++
++		partition@40000 {
++			label = "firmware";
++			reg = <0x0040000 0x1fc0000>;
++		};
++	}
++}
diff --git a/target/linux/generic/pending-5.4/497-mtd-mtdconcat-add-dt-driver-for-concat-devices.patch b/target/linux/generic/pending-5.4/497-mtd-mtdconcat-add-dt-driver-for-concat-devices.patch
new file mode 100644
index 0000000000..6584e22882
--- /dev/null
+++ b/target/linux/generic/pending-5.4/497-mtd-mtdconcat-add-dt-driver-for-concat-devices.patch
@@ -0,0 +1,216 @@
+From e53f712d8eac71f54399b61038ccf87d2cee99d7 Mon Sep 17 00:00:00 2001
+From: Bernhard Frauendienst <kernel@nospam.obeliks.de>
+Date: Sat, 25 Aug 2018 12:35:22 +0200
+Subject: [PATCH 497/497] mtd: mtdconcat: add dt driver for concat devices
+
+Some mtd drivers like physmap variants have support for concatenating
+multiple mtd devices, but there is no generic way to define such a
+concat device from within the device tree.
+
+This is useful for some SoC boards that use multiple flash chips as
+memory banks of a single mtd device, with partitions spanning chip
+borders.
+
+This commit adds a driver for creating virtual mtd-concat devices. They
+must have a compatible = "mtd-concat" line, and define a list of devices
+to concat in the 'devices' property, for example:
+
+flash {
+  compatible = "mtd-concat";
+
+  devices = <&flash0 &flash1>;
+
+  partitions {
+    ...
+  };
+};
+
+The driver is added to the very end of the mtd Makefile to increase the
+likelyhood of all child devices already being loaded at the time of
+probing, preventing unnecessary deferred probes.
+
+Signed-off-by: Bernhard Frauendienst <kernel@nospam.obeliks.de>
+---
+ drivers/mtd/Kconfig                 |   2 +
+ drivers/mtd/Makefile                |   3 +
+ drivers/mtd/composite/Kconfig       |  12 +++
+ drivers/mtd/composite/Makefile      |   6 ++
+ drivers/mtd/composite/virt_concat.c | 128 ++++++++++++++++++++++++++++
+ 5 files changed, 151 insertions(+)
+ create mode 100644 drivers/mtd/composite/Kconfig
+ create mode 100644 drivers/mtd/composite/Makefile
+ create mode 100644 drivers/mtd/composite/virt_concat.c
+
+--- a/drivers/mtd/Kconfig
++++ b/drivers/mtd/Kconfig
+@@ -374,4 +374,6 @@ source "drivers/mtd/spi-nor/Kconfig"
+ 
+ source "drivers/mtd/ubi/Kconfig"
+ 
++source "drivers/mtd/composite/Kconfig"
++
+ endif # MTD
+--- a/drivers/mtd/Makefile
++++ b/drivers/mtd/Makefile
+@@ -39,3 +39,6 @@ obj-y		+= chips/ lpddr/ maps/ devices/ n
+ 
+ obj-$(CONFIG_MTD_SPI_NOR)	+= spi-nor/
+ obj-$(CONFIG_MTD_UBI)		+= ubi/
++
++# Composite drivers must be loaded last
++obj-y		+= composite/
+--- /dev/null
++++ b/drivers/mtd/composite/Kconfig
+@@ -0,0 +1,12 @@
++menu "Composite MTD device drivers"
++	depends on MTD!=n
++
++config MTD_VIRT_CONCAT
++	tristate "Virtual concat MTD device"
++	help
++	  This driver allows creation of a virtual MTD concat device, which
++	  concatenates multiple underlying MTD devices to a single device.
++	  This is required by some SoC boards where multiple memory banks are
++	  used as one device with partitions spanning across device boundaries.
++
++endmenu
+--- /dev/null
++++ b/drivers/mtd/composite/Makefile
+@@ -0,0 +1,6 @@
++# SPDX-License-Identifier: GPL-2.0
++#
++# linux/drivers/mtd/composite/Makefile
++#
++
++obj-$(CONFIG_MTD_VIRT_CONCAT)   += virt_concat.o
+--- /dev/null
++++ b/drivers/mtd/composite/virt_concat.c
+@@ -0,0 +1,128 @@
++// SPDX-License-Identifier: GPL-2.0+
++/*
++ * Virtual concat MTD device driver
++ *
++ * Copyright (C) 2018 Bernhard Frauendienst
++ * Author: Bernhard Frauendienst, kernel@nospam.obeliks.de
++ */
++
++#include <linux/module.h>
++#include <linux/device.h>
++#include <linux/mtd/concat.h>
++#include <linux/mtd/mtd.h>
++#include <linux/mtd/partitions.h>
++#include <linux/of.h>
++#include <linux/of_platform.h>
++#include <linux/slab.h>
++
++/*
++ * struct of_virt_concat - platform device driver data.
++ * @cmtd the final mtd_concat device
++ * @num_devices the number of devices in @devices
++ * @devices points to an array of devices already loaded
++ */
++struct of_virt_concat {
++	struct mtd_info	*cmtd;
++	int num_devices;
++	struct mtd_info	**devices;
++};
++
++static int virt_concat_remove(struct platform_device *pdev)
++{
++	struct of_virt_concat *info;
++	int i;
++
++	info = platform_get_drvdata(pdev);
++	if (!info)
++		return 0;
++
++	// unset data for when this is called after a probe error
++	platform_set_drvdata(pdev, NULL);
++
++	if (info->cmtd) {
++		mtd_device_unregister(info->cmtd);
++		mtd_concat_destroy(info->cmtd);
++	}
++
++	if (info->devices) {
++		for (i = 0; i < info->num_devices; i++)
++			put_mtd_device(info->devices[i]);
++	}
++
++	return 0;
++}
++
++static int virt_concat_probe(struct platform_device *pdev)
++{
++	struct device_node *node = pdev->dev.of_node;
++	struct of_phandle_iterator it;
++	struct of_virt_concat *info;
++	struct mtd_info *mtd;
++	int err = 0, count;
++
++	count = of_count_phandle_with_args(node, "devices", NULL);
++	if (count <= 0)
++		return -EINVAL;
++
++	info = devm_kzalloc(&pdev->dev, sizeof(*info), GFP_KERNEL);
++	if (!info)
++		return -ENOMEM;
++	info->devices = devm_kcalloc(&pdev->dev, count,
++				     sizeof(*(info->devices)), GFP_KERNEL);
++	if (!info->devices) {
++		err = -ENOMEM;
++		goto err_remove;
++	}
++
++	platform_set_drvdata(pdev, info);
++
++	of_for_each_phandle(&it, err, node, "devices", NULL, 0) {
++		mtd = get_mtd_device_by_node(it.node);
++		if (IS_ERR(mtd)) {
++			of_node_put(it.node);
++			err = -EPROBE_DEFER;
++			goto err_remove;
++		}
++
++		info->devices[info->num_devices++] = mtd;
++	}
++
++	info->cmtd = mtd_concat_create(info->devices, info->num_devices,
++				       dev_name(&pdev->dev));
++	if (!info->cmtd) {
++		err = -ENXIO;
++		goto err_remove;
++	}
++
++	info->cmtd->dev.parent = &pdev->dev;
++	mtd_set_of_node(info->cmtd, node);
++	mtd_device_register(info->cmtd, NULL, 0);
++
++	return 0;
++
++err_remove:
++	virt_concat_remove(pdev);
++
++	return err;
++}
++
++static const struct of_device_id virt_concat_of_match[] = {
++	{ .compatible = "mtd-concat", },
++	{ /* sentinel */ }
++};
++MODULE_DEVICE_TABLE(of, virt_concat_of_match);
++
++static struct platform_driver virt_concat_driver = {
++	.probe = virt_concat_probe,
++	.remove = virt_concat_remove,
++	.driver	 = {
++		.name   = "virt-mtdconcat",
++		.of_match_table = virt_concat_of_match,
++	},
++};
++
++module_platform_driver(virt_concat_driver);
++
++MODULE_LICENSE("GPL v2");
++MODULE_AUTHOR("Bernhard Frauendienst <kernel@nospam.obeliks.de>");
++MODULE_DESCRIPTION("Virtual concat MTD device driver");
diff --git a/target/linux/generic/pending-5.4/530-jffs2_make_lzma_available.patch b/target/linux/generic/pending-5.4/530-jffs2_make_lzma_available.patch
new file mode 100644
index 0000000000..f28186a40c
--- /dev/null
+++ b/target/linux/generic/pending-5.4/530-jffs2_make_lzma_available.patch
@@ -0,0 +1,5180 @@
+From: Alexandros C. Couloumbis <alex@ozo.com>
+Subject: fs: add jffs2/lzma support (not activated by default yet)
+
+lede-commit: c2c88d315fa0e881f8b19da07b62859b915b11b2
+Signed-off-by: Alexandros C. Couloumbis <alex@ozo.com>
+---
+ fs/jffs2/Kconfig             |    9 +
+ fs/jffs2/Makefile            |    3 +
+ fs/jffs2/compr.c             |    6 +
+ fs/jffs2/compr.h             |   10 +-
+ fs/jffs2/compr_lzma.c        |  128 +++
+ fs/jffs2/super.c             |   33 +-
+ include/linux/lzma.h         |   62 ++
+ include/linux/lzma/LzFind.h  |  115 +++
+ include/linux/lzma/LzHash.h  |   54 +
+ include/linux/lzma/LzmaDec.h |  231 +++++
+ include/linux/lzma/LzmaEnc.h |   80 ++
+ include/linux/lzma/Types.h   |  226 +++++
+ include/uapi/linux/jffs2.h   |    1 +
+ lib/Kconfig                  |    6 +
+ lib/Makefile                 |   12 +
+ lib/lzma/LzFind.c            |  761 ++++++++++++++
+ lib/lzma/LzmaDec.c           |  999 +++++++++++++++++++
+ lib/lzma/LzmaEnc.c           | 2271 ++++++++++++++++++++++++++++++++++++++++++
+ lib/lzma/Makefile            |    7 +
+ 19 files changed, 5008 insertions(+), 6 deletions(-)
+ create mode 100644 fs/jffs2/compr_lzma.c
+ create mode 100644 include/linux/lzma.h
+ create mode 100644 include/linux/lzma/LzFind.h
+ create mode 100644 include/linux/lzma/LzHash.h
+ create mode 100644 include/linux/lzma/LzmaDec.h
+ create mode 100644 include/linux/lzma/LzmaEnc.h
+ create mode 100644 include/linux/lzma/Types.h
+ create mode 100644 lib/lzma/LzFind.c
+ create mode 100644 lib/lzma/LzmaDec.c
+ create mode 100644 lib/lzma/LzmaEnc.c
+ create mode 100644 lib/lzma/Makefile
+
+--- a/fs/jffs2/Kconfig
++++ b/fs/jffs2/Kconfig
+@@ -135,6 +135,15 @@ config JFFS2_LZO
+ 	  This feature was added in July, 2007. Say 'N' if you need
+ 	  compatibility with older bootloaders or kernels.
+ 
++config JFFS2_LZMA
++	bool "JFFS2 LZMA compression support" if JFFS2_COMPRESSION_OPTIONS
++	select LZMA_COMPRESS
++	select LZMA_DECOMPRESS
++	depends on JFFS2_FS
++	default n
++	help
++	  JFFS2 wrapper to the LZMA C SDK
++
+ config JFFS2_RTIME
+ 	bool "JFFS2 RTIME compression support" if JFFS2_COMPRESSION_OPTIONS
+ 	depends on JFFS2_FS
+--- a/fs/jffs2/Makefile
++++ b/fs/jffs2/Makefile
+@@ -19,4 +19,7 @@ jffs2-$(CONFIG_JFFS2_RUBIN)	+= compr_rub
+ jffs2-$(CONFIG_JFFS2_RTIME)	+= compr_rtime.o
+ jffs2-$(CONFIG_JFFS2_ZLIB)	+= compr_zlib.o
+ jffs2-$(CONFIG_JFFS2_LZO)	+= compr_lzo.o
++jffs2-$(CONFIG_JFFS2_LZMA)      += compr_lzma.o
+ jffs2-$(CONFIG_JFFS2_SUMMARY)   += summary.o
++
++CFLAGS_compr_lzma.o += -Iinclude/linux -Ilib/lzma
+--- a/fs/jffs2/compr.c
++++ b/fs/jffs2/compr.c
+@@ -378,6 +378,9 @@ int __init jffs2_compressors_init(void)
+ #ifdef CONFIG_JFFS2_LZO
+ 	jffs2_lzo_init();
+ #endif
++#ifdef CONFIG_JFFS2_LZMA
++        jffs2_lzma_init();
++#endif
+ /* Setting default compression mode */
+ #ifdef CONFIG_JFFS2_CMODE_NONE
+ 	jffs2_compression_mode = JFFS2_COMPR_MODE_NONE;
+@@ -401,6 +404,9 @@ int __init jffs2_compressors_init(void)
+ int jffs2_compressors_exit(void)
+ {
+ /* Unregistering compressors */
++#ifdef CONFIG_JFFS2_LZMA
++        jffs2_lzma_exit();
++#endif
+ #ifdef CONFIG_JFFS2_LZO
+ 	jffs2_lzo_exit();
+ #endif
+--- a/fs/jffs2/compr.h
++++ b/fs/jffs2/compr.h
+@@ -29,9 +29,9 @@
+ #define JFFS2_DYNRUBIN_PRIORITY  20
+ #define JFFS2_LZARI_PRIORITY     30
+ #define JFFS2_RTIME_PRIORITY     50
+-#define JFFS2_ZLIB_PRIORITY      60
+-#define JFFS2_LZO_PRIORITY       80
+-
++#define JFFS2_LZMA_PRIORITY      70
++#define JFFS2_ZLIB_PRIORITY      80
++#define JFFS2_LZO_PRIORITY       90
+ 
+ #define JFFS2_RUBINMIPS_DISABLED /* RUBINs will be used only */
+ #define JFFS2_DYNRUBIN_DISABLED  /*	   for decompression */
+@@ -101,5 +101,9 @@ void jffs2_zlib_exit(void);
+ int jffs2_lzo_init(void);
+ void jffs2_lzo_exit(void);
+ #endif
++#ifdef CONFIG_JFFS2_LZMA
++int jffs2_lzma_init(void);
++void jffs2_lzma_exit(void);
++#endif
+ 
+ #endif /* __JFFS2_COMPR_H__ */
+--- /dev/null
++++ b/fs/jffs2/compr_lzma.c
+@@ -0,0 +1,128 @@
++/*
++ * JFFS2 -- Journalling Flash File System, Version 2.
++ *
++ * For licensing information, see the file 'LICENCE' in this directory.
++ *
++ * JFFS2 wrapper to the LZMA C SDK
++ *
++ */
++
++#include <linux/lzma.h>
++#include "compr.h"
++
++#ifdef __KERNEL__
++	static DEFINE_MUTEX(deflate_mutex);
++#endif
++
++CLzmaEncHandle *p;
++Byte propsEncoded[LZMA_PROPS_SIZE];
++SizeT propsSize = sizeof(propsEncoded);
++
++STATIC void lzma_free_workspace(void)
++{
++	LzmaEnc_Destroy(p, &lzma_alloc, &lzma_alloc);
++}
++
++STATIC int INIT lzma_alloc_workspace(CLzmaEncProps *props)
++{
++	if ((p = (CLzmaEncHandle *)LzmaEnc_Create(&lzma_alloc)) == NULL)
++	{
++		PRINT_ERROR("Failed to allocate lzma deflate workspace\n");
++		return -ENOMEM;
++	}
++
++	if (LzmaEnc_SetProps(p, props) != SZ_OK)
++	{
++		lzma_free_workspace();
++		return -1;
++	}
++	
++	if (LzmaEnc_WriteProperties(p, propsEncoded, &propsSize) != SZ_OK)
++	{
++		lzma_free_workspace();
++		return -1;
++	}
++
++        return 0;
++}
++
++STATIC int jffs2_lzma_compress(unsigned char *data_in, unsigned char *cpage_out,
++			      uint32_t *sourcelen, uint32_t *dstlen)
++{
++	SizeT compress_size = (SizeT)(*dstlen);
++	int ret;
++
++	#ifdef __KERNEL__
++		mutex_lock(&deflate_mutex);
++	#endif
++
++	ret = LzmaEnc_MemEncode(p, cpage_out, &compress_size, data_in, *sourcelen,
++		0, NULL, &lzma_alloc, &lzma_alloc);
++
++	#ifdef __KERNEL__
++		mutex_unlock(&deflate_mutex);
++	#endif
++
++	if (ret != SZ_OK)
++		return -1;
++
++	*dstlen = (uint32_t)compress_size;
++
++	return 0;
++}
++
++STATIC int jffs2_lzma_decompress(unsigned char *data_in, unsigned char *cpage_out,
++				 uint32_t srclen, uint32_t destlen)
++{
++	int ret;
++	SizeT dl = (SizeT)destlen;
++	SizeT sl = (SizeT)srclen;
++	ELzmaStatus status;
++	
++	ret = LzmaDecode(cpage_out, &dl, data_in, &sl, propsEncoded,
++		propsSize, LZMA_FINISH_ANY, &status, &lzma_alloc);
++
++	if (ret != SZ_OK || status == LZMA_STATUS_NOT_FINISHED || dl != (SizeT)destlen)
++		return -1;
++
++	return 0;
++}
++
++static struct jffs2_compressor jffs2_lzma_comp = {
++	.priority = JFFS2_LZMA_PRIORITY,
++	.name = "lzma",
++	.compr = JFFS2_COMPR_LZMA,
++	.compress = &jffs2_lzma_compress,
++	.decompress = &jffs2_lzma_decompress,
++	.disabled = 0,
++};
++
++int INIT jffs2_lzma_init(void)
++{
++        int ret;
++	CLzmaEncProps props;
++	LzmaEncProps_Init(&props);
++
++        props.dictSize = LZMA_BEST_DICT(0x2000);
++        props.level = LZMA_BEST_LEVEL;
++        props.lc = LZMA_BEST_LC;
++        props.lp = LZMA_BEST_LP;
++        props.pb = LZMA_BEST_PB;
++        props.fb = LZMA_BEST_FB;
++
++	ret = lzma_alloc_workspace(&props);
++        if (ret < 0)
++                return ret;
++
++	ret = jffs2_register_compressor(&jffs2_lzma_comp);
++	if (ret)
++		lzma_free_workspace();
++	
++        return ret;
++}
++
++void jffs2_lzma_exit(void)
++{
++	jffs2_unregister_compressor(&jffs2_lzma_comp);
++	lzma_free_workspace();
++}
+--- a/fs/jffs2/super.c
++++ b/fs/jffs2/super.c
+@@ -374,14 +374,41 @@ static int __init init_jffs2_fs(void)
+ 	BUILD_BUG_ON(sizeof(struct jffs2_raw_inode) != 68);
+ 	BUILD_BUG_ON(sizeof(struct jffs2_raw_summary) != 32);
+ 
+-	pr_info("version 2.2."
++	pr_info("version 2.2"
+ #ifdef CONFIG_JFFS2_FS_WRITEBUFFER
+ 	       " (NAND)"
+ #endif
+ #ifdef CONFIG_JFFS2_SUMMARY
+-	       " (SUMMARY) "
++	       " (SUMMARY)"
+ #endif
+-	       " © 2001-2006 Red Hat, Inc.\n");
++#ifdef CONFIG_JFFS2_ZLIB
++	       " (ZLIB)"
++#endif
++#ifdef CONFIG_JFFS2_LZO
++	       " (LZO)"
++#endif
++#ifdef CONFIG_JFFS2_LZMA
++	       " (LZMA)"
++#endif
++#ifdef CONFIG_JFFS2_RTIME
++	       " (RTIME)"
++#endif
++#ifdef CONFIG_JFFS2_RUBIN
++	       " (RUBIN)"
++#endif
++#ifdef  CONFIG_JFFS2_CMODE_NONE
++	       " (CMODE_NONE)"
++#endif
++#ifdef CONFIG_JFFS2_CMODE_PRIORITY
++	       " (CMODE_PRIORITY)"
++#endif
++#ifdef CONFIG_JFFS2_CMODE_SIZE
++	       " (CMODE_SIZE)"
++#endif
++#ifdef CONFIG_JFFS2_CMODE_FAVOURLZO
++	       " (CMODE_FAVOURLZO)"
++#endif
++	       " (c) 2001-2006 Red Hat, Inc.\n");
+ 
+ 	jffs2_inode_cachep = kmem_cache_create("jffs2_i",
+ 					     sizeof(struct jffs2_inode_info),
+--- /dev/null
++++ b/include/linux/lzma.h
+@@ -0,0 +1,62 @@
++#ifndef __LZMA_H__
++#define __LZMA_H__
++
++#ifdef __KERNEL__
++	#include <linux/kernel.h>
++	#include <linux/sched.h>
++	#include <linux/slab.h>
++	#include <linux/vmalloc.h>
++	#include <linux/init.h>
++	#define LZMA_MALLOC vmalloc
++	#define LZMA_FREE vfree
++	#define PRINT_ERROR(msg) printk(KERN_WARNING #msg)
++	#define INIT __init
++	#define STATIC static
++#else
++	#include <stdint.h>
++	#include <stdlib.h>
++	#include <stdio.h>
++	#include <unistd.h>
++	#include <string.h>
++	#include <asm/types.h>
++	#include <errno.h>
++	#include <linux/jffs2.h>
++	#ifndef PAGE_SIZE
++		extern int page_size;
++		#define PAGE_SIZE page_size
++	#endif
++	#define LZMA_MALLOC malloc
++	#define LZMA_FREE free
++	#define PRINT_ERROR(msg) fprintf(stderr, msg)
++	#define INIT
++	#define STATIC
++#endif
++
++#include "lzma/LzmaDec.h"
++#include "lzma/LzmaEnc.h"
++
++#define LZMA_BEST_LEVEL (9)
++#define LZMA_BEST_LC    (0)
++#define LZMA_BEST_LP    (0)
++#define LZMA_BEST_PB    (0)
++#define LZMA_BEST_FB  (273)
++
++#define LZMA_BEST_DICT(n) (((int)((n) / 2)) * 2)
++
++static void *p_lzma_malloc(void *p, size_t size)
++{
++        if (size == 0)
++                return NULL;
++
++        return LZMA_MALLOC(size);
++}
++
++static void p_lzma_free(void *p, void *address)
++{
++        if (address != NULL)
++                LZMA_FREE(address);
++}
++
++static ISzAlloc lzma_alloc = {p_lzma_malloc, p_lzma_free};
++
++#endif
+--- /dev/null
++++ b/include/linux/lzma/LzFind.h
+@@ -0,0 +1,115 @@
++/* LzFind.h -- Match finder for LZ algorithms
++2009-04-22 : Igor Pavlov : Public domain */
++
++#ifndef __LZ_FIND_H
++#define __LZ_FIND_H
++
++#include "Types.h"
++
++#ifdef __cplusplus
++extern "C" {
++#endif
++
++typedef UInt32 CLzRef;
++
++typedef struct _CMatchFinder
++{
++  Byte *buffer;
++  UInt32 pos;
++  UInt32 posLimit;
++  UInt32 streamPos;
++  UInt32 lenLimit;
++
++  UInt32 cyclicBufferPos;
++  UInt32 cyclicBufferSize; /* it must be = (historySize + 1) */
++
++  UInt32 matchMaxLen;
++  CLzRef *hash;
++  CLzRef *son;
++  UInt32 hashMask;
++  UInt32 cutValue;
++
++  Byte *bufferBase;
++  ISeqInStream *stream;
++  int streamEndWasReached;
++
++  UInt32 blockSize;
++  UInt32 keepSizeBefore;
++  UInt32 keepSizeAfter;
++
++  UInt32 numHashBytes;
++  int directInput;
++  size_t directInputRem;
++  int btMode;
++  int bigHash;
++  UInt32 historySize;
++  UInt32 fixedHashSize;
++  UInt32 hashSizeSum;
++  UInt32 numSons;
++  SRes result;
++  UInt32 crc[256];
++} CMatchFinder;
++
++#define Inline_MatchFinder_GetPointerToCurrentPos(p) ((p)->buffer)
++#define Inline_MatchFinder_GetIndexByte(p, index) ((p)->buffer[(Int32)(index)])
++
++#define Inline_MatchFinder_GetNumAvailableBytes(p) ((p)->streamPos - (p)->pos)
++
++int MatchFinder_NeedMove(CMatchFinder *p);
++Byte *MatchFinder_GetPointerToCurrentPos(CMatchFinder *p);
++void MatchFinder_MoveBlock(CMatchFinder *p);
++void MatchFinder_ReadIfRequired(CMatchFinder *p);
++
++void MatchFinder_Construct(CMatchFinder *p);
++
++/* Conditions:
++     historySize <= 3 GB
++     keepAddBufferBefore + matchMaxLen + keepAddBufferAfter < 511MB
++*/
++int MatchFinder_Create(CMatchFinder *p, UInt32 historySize,
++    UInt32 keepAddBufferBefore, UInt32 matchMaxLen, UInt32 keepAddBufferAfter,
++    ISzAlloc *alloc);
++void MatchFinder_Free(CMatchFinder *p, ISzAlloc *alloc);
++void MatchFinder_Normalize3(UInt32 subValue, CLzRef *items, UInt32 numItems);
++void MatchFinder_ReduceOffsets(CMatchFinder *p, UInt32 subValue);
++
++UInt32 * GetMatchesSpec1(UInt32 lenLimit, UInt32 curMatch, UInt32 pos, const Byte *buffer, CLzRef *son,
++    UInt32 _cyclicBufferPos, UInt32 _cyclicBufferSize, UInt32 _cutValue,
++    UInt32 *distances, UInt32 maxLen);
++
++/*
++Conditions:
++  Mf_GetNumAvailableBytes_Func must be called before each Mf_GetMatchLen_Func.
++  Mf_GetPointerToCurrentPos_Func's result must be used only before any other function
++*/
++
++typedef void (*Mf_Init_Func)(void *object);
++typedef Byte (*Mf_GetIndexByte_Func)(void *object, Int32 index);
++typedef UInt32 (*Mf_GetNumAvailableBytes_Func)(void *object);
++typedef const Byte * (*Mf_GetPointerToCurrentPos_Func)(void *object);
++typedef UInt32 (*Mf_GetMatches_Func)(void *object, UInt32 *distances);
++typedef void (*Mf_Skip_Func)(void *object, UInt32);
++
++typedef struct _IMatchFinder
++{
++  Mf_Init_Func Init;
++  Mf_GetIndexByte_Func GetIndexByte;
++  Mf_GetNumAvailableBytes_Func GetNumAvailableBytes;
++  Mf_GetPointerToCurrentPos_Func GetPointerToCurrentPos;
++  Mf_GetMatches_Func GetMatches;
++  Mf_Skip_Func Skip;
++} IMatchFinder;
++
++void MatchFinder_CreateVTable(CMatchFinder *p, IMatchFinder *vTable);
++
++void MatchFinder_Init(CMatchFinder *p);
++UInt32 Bt3Zip_MatchFinder_GetMatches(CMatchFinder *p, UInt32 *distances);
++UInt32 Hc3Zip_MatchFinder_GetMatches(CMatchFinder *p, UInt32 *distances);
++void Bt3Zip_MatchFinder_Skip(CMatchFinder *p, UInt32 num);
++void Hc3Zip_MatchFinder_Skip(CMatchFinder *p, UInt32 num);
++
++#ifdef __cplusplus
++}
++#endif
++
++#endif
+--- /dev/null
++++ b/include/linux/lzma/LzHash.h
+@@ -0,0 +1,54 @@
++/* LzHash.h -- HASH functions for LZ algorithms
++2009-02-07 : Igor Pavlov : Public domain */
++
++#ifndef __LZ_HASH_H
++#define __LZ_HASH_H
++
++#define kHash2Size (1 << 10)
++#define kHash3Size (1 << 16)
++#define kHash4Size (1 << 20)
++
++#define kFix3HashSize (kHash2Size)
++#define kFix4HashSize (kHash2Size + kHash3Size)
++#define kFix5HashSize (kHash2Size + kHash3Size + kHash4Size)
++
++#define HASH2_CALC hashValue = cur[0] | ((UInt32)cur[1] << 8);
++
++#define HASH3_CALC { \
++  UInt32 temp = p->crc[cur[0]] ^ cur[1]; \
++  hash2Value = temp & (kHash2Size - 1); \
++  hashValue = (temp ^ ((UInt32)cur[2] << 8)) & p->hashMask; }
++
++#define HASH4_CALC { \
++  UInt32 temp = p->crc[cur[0]] ^ cur[1]; \
++  hash2Value = temp & (kHash2Size - 1); \
++  hash3Value = (temp ^ ((UInt32)cur[2] << 8)) & (kHash3Size - 1); \
++  hashValue = (temp ^ ((UInt32)cur[2] << 8) ^ (p->crc[cur[3]] << 5)) & p->hashMask; }
++
++#define HASH5_CALC { \
++  UInt32 temp = p->crc[cur[0]] ^ cur[1]; \
++  hash2Value = temp & (kHash2Size - 1); \
++  hash3Value = (temp ^ ((UInt32)cur[2] << 8)) & (kHash3Size - 1); \
++  hash4Value = (temp ^ ((UInt32)cur[2] << 8) ^ (p->crc[cur[3]] << 5)); \
++  hashValue = (hash4Value ^ (p->crc[cur[4]] << 3)) & p->hashMask; \
++  hash4Value &= (kHash4Size - 1); }
++
++/* #define HASH_ZIP_CALC hashValue = ((cur[0] | ((UInt32)cur[1] << 8)) ^ p->crc[cur[2]]) & 0xFFFF; */
++#define HASH_ZIP_CALC hashValue = ((cur[2] | ((UInt32)cur[0] << 8)) ^ p->crc[cur[1]]) & 0xFFFF;
++
++
++#define MT_HASH2_CALC \
++  hash2Value = (p->crc[cur[0]] ^ cur[1]) & (kHash2Size - 1);
++
++#define MT_HASH3_CALC { \
++  UInt32 temp = p->crc[cur[0]] ^ cur[1]; \
++  hash2Value = temp & (kHash2Size - 1); \
++  hash3Value = (temp ^ ((UInt32)cur[2] << 8)) & (kHash3Size - 1); }
++
++#define MT_HASH4_CALC { \
++  UInt32 temp = p->crc[cur[0]] ^ cur[1]; \
++  hash2Value = temp & (kHash2Size - 1); \
++  hash3Value = (temp ^ ((UInt32)cur[2] << 8)) & (kHash3Size - 1); \
++  hash4Value = (temp ^ ((UInt32)cur[2] << 8) ^ (p->crc[cur[3]] << 5)) & (kHash4Size - 1); }
++
++#endif
+--- /dev/null
++++ b/include/linux/lzma/LzmaDec.h
+@@ -0,0 +1,231 @@
++/* LzmaDec.h -- LZMA Decoder
++2009-02-07 : Igor Pavlov : Public domain */
++
++#ifndef __LZMA_DEC_H
++#define __LZMA_DEC_H
++
++#include "Types.h"
++
++#ifdef __cplusplus
++extern "C" {
++#endif
++
++/* #define _LZMA_PROB32 */
++/* _LZMA_PROB32 can increase the speed on some CPUs,
++   but memory usage for CLzmaDec::probs will be doubled in that case */
++
++#ifdef _LZMA_PROB32
++#define CLzmaProb UInt32
++#else
++#define CLzmaProb UInt16
++#endif
++
++
++/* ---------- LZMA Properties ---------- */
++
++#define LZMA_PROPS_SIZE 5
++
++typedef struct _CLzmaProps
++{
++  unsigned lc, lp, pb;
++  UInt32 dicSize;
++} CLzmaProps;
++
++/* LzmaProps_Decode - decodes properties
++Returns:
++  SZ_OK
++  SZ_ERROR_UNSUPPORTED - Unsupported properties
++*/
++
++SRes LzmaProps_Decode(CLzmaProps *p, const Byte *data, unsigned size);
++
++
++/* ---------- LZMA Decoder state ---------- */
++
++/* LZMA_REQUIRED_INPUT_MAX = number of required input bytes for worst case.
++   Num bits = log2((2^11 / 31) ^ 22) + 26 < 134 + 26 = 160; */
++
++#define LZMA_REQUIRED_INPUT_MAX 20
++
++typedef struct
++{
++  CLzmaProps prop;
++  CLzmaProb *probs;
++  Byte *dic;
++  const Byte *buf;
++  UInt32 range, code;
++  SizeT dicPos;
++  SizeT dicBufSize;
++  UInt32 processedPos;
++  UInt32 checkDicSize;
++  unsigned state;
++  UInt32 reps[4];
++  unsigned remainLen;
++  int needFlush;
++  int needInitState;
++  UInt32 numProbs;
++  unsigned tempBufSize;
++  Byte tempBuf[LZMA_REQUIRED_INPUT_MAX];
++} CLzmaDec;
++
++#define LzmaDec_Construct(p) { (p)->dic = 0; (p)->probs = 0; }
++
++void LzmaDec_Init(CLzmaDec *p);
++
++/* There are two types of LZMA streams:
++     0) Stream with end mark. That end mark adds about 6 bytes to compressed size.
++     1) Stream without end mark. You must know exact uncompressed size to decompress such stream. */
++
++typedef enum
++{
++  LZMA_FINISH_ANY,   /* finish at any point */
++  LZMA_FINISH_END    /* block must be finished at the end */
++} ELzmaFinishMode;
++
++/* ELzmaFinishMode has meaning only if the decoding reaches output limit !!!
++
++   You must use LZMA_FINISH_END, when you know that current output buffer
++   covers last bytes of block. In other cases you must use LZMA_FINISH_ANY.
++
++   If LZMA decoder sees end marker before reaching output limit, it returns SZ_OK,
++   and output value of destLen will be less than output buffer size limit.
++   You can check status result also.
++
++   You can use multiple checks to test data integrity after full decompression:
++     1) Check Result and "status" variable.
++     2) Check that output(destLen) = uncompressedSize, if you know real uncompressedSize.
++     3) Check that output(srcLen) = compressedSize, if you know real compressedSize.
++        You must use correct finish mode in that case. */
++
++typedef enum
++{
++  LZMA_STATUS_NOT_SPECIFIED,               /* use main error code instead */
++  LZMA_STATUS_FINISHED_WITH_MARK,          /* stream was finished with end mark. */
++  LZMA_STATUS_NOT_FINISHED,                /* stream was not finished */
++  LZMA_STATUS_NEEDS_MORE_INPUT,            /* you must provide more input bytes */
++  LZMA_STATUS_MAYBE_FINISHED_WITHOUT_MARK  /* there is probability that stream was finished without end mark */
++} ELzmaStatus;
++
++/* ELzmaStatus is used only as output value for function call */
++
++
++/* ---------- Interfaces ---------- */
++
++/* There are 3 levels of interfaces:
++     1) Dictionary Interface
++     2) Buffer Interface
++     3) One Call Interface
++   You can select any of these interfaces, but don't mix functions from different
++   groups for same object. */
++
++
++/* There are two variants to allocate state for Dictionary Interface:
++     1) LzmaDec_Allocate / LzmaDec_Free
++     2) LzmaDec_AllocateProbs / LzmaDec_FreeProbs
++   You can use variant 2, if you set dictionary buffer manually.
++   For Buffer Interface you must always use variant 1.
++
++LzmaDec_Allocate* can return:
++  SZ_OK
++  SZ_ERROR_MEM         - Memory allocation error
++  SZ_ERROR_UNSUPPORTED - Unsupported properties
++*/
++   
++SRes LzmaDec_AllocateProbs(CLzmaDec *p, const Byte *props, unsigned propsSize, ISzAlloc *alloc);
++void LzmaDec_FreeProbs(CLzmaDec *p, ISzAlloc *alloc);
++
++SRes LzmaDec_Allocate(CLzmaDec *state, const Byte *prop, unsigned propsSize, ISzAlloc *alloc);
++void LzmaDec_Free(CLzmaDec *state, ISzAlloc *alloc);
++
++/* ---------- Dictionary Interface ---------- */
++
++/* You can use it, if you want to eliminate the overhead for data copying from
++   dictionary to some other external buffer.
++   You must work with CLzmaDec variables directly in this interface.
++
++   STEPS:
++     LzmaDec_Constr()
++     LzmaDec_Allocate()
++     for (each new stream)
++     {
++       LzmaDec_Init()
++       while (it needs more decompression)
++       {
++         LzmaDec_DecodeToDic()
++         use data from CLzmaDec::dic and update CLzmaDec::dicPos
++       }
++     }
++     LzmaDec_Free()
++*/
++
++/* LzmaDec_DecodeToDic
++   
++   The decoding to internal dictionary buffer (CLzmaDec::dic).
++   You must manually update CLzmaDec::dicPos, if it reaches CLzmaDec::dicBufSize !!!
++
++finishMode:
++  It has meaning only if the decoding reaches output limit (dicLimit).
++  LZMA_FINISH_ANY - Decode just dicLimit bytes.
++  LZMA_FINISH_END - Stream must be finished after dicLimit.
++
++Returns:
++  SZ_OK
++    status:
++      LZMA_STATUS_FINISHED_WITH_MARK
++      LZMA_STATUS_NOT_FINISHED
++      LZMA_STATUS_NEEDS_MORE_INPUT
++      LZMA_STATUS_MAYBE_FINISHED_WITHOUT_MARK
++  SZ_ERROR_DATA - Data error
++*/
++
++SRes LzmaDec_DecodeToDic(CLzmaDec *p, SizeT dicLimit,
++    const Byte *src, SizeT *srcLen, ELzmaFinishMode finishMode, ELzmaStatus *status);
++
++
++/* ---------- Buffer Interface ---------- */
++
++/* It's zlib-like interface.
++   See LzmaDec_DecodeToDic description for information about STEPS and return results,
++   but you must use LzmaDec_DecodeToBuf instead of LzmaDec_DecodeToDic and you don't need
++   to work with CLzmaDec variables manually.
++
++finishMode:
++  It has meaning only if the decoding reaches output limit (*destLen).
++  LZMA_FINISH_ANY - Decode just destLen bytes.
++  LZMA_FINISH_END - Stream must be finished after (*destLen).
++*/
++
++SRes LzmaDec_DecodeToBuf(CLzmaDec *p, Byte *dest, SizeT *destLen,
++    const Byte *src, SizeT *srcLen, ELzmaFinishMode finishMode, ELzmaStatus *status);
++
++
++/* ---------- One Call Interface ---------- */
++
++/* LzmaDecode
++
++finishMode:
++  It has meaning only if the decoding reaches output limit (*destLen).
++  LZMA_FINISH_ANY - Decode just destLen bytes.
++  LZMA_FINISH_END - Stream must be finished after (*destLen).
++
++Returns:
++  SZ_OK
++    status:
++      LZMA_STATUS_FINISHED_WITH_MARK
++      LZMA_STATUS_NOT_FINISHED
++      LZMA_STATUS_MAYBE_FINISHED_WITHOUT_MARK
++  SZ_ERROR_DATA - Data error
++  SZ_ERROR_MEM  - Memory allocation error
++  SZ_ERROR_UNSUPPORTED - Unsupported properties
++  SZ_ERROR_INPUT_EOF - It needs more bytes in input buffer (src).
++*/
++
++SRes LzmaDecode(Byte *dest, SizeT *destLen, const Byte *src, SizeT *srcLen,
++    const Byte *propData, unsigned propSize, ELzmaFinishMode finishMode,
++    ELzmaStatus *status, ISzAlloc *alloc);
++
++#ifdef __cplusplus
++}
++#endif
++
++#endif
+--- /dev/null
++++ b/include/linux/lzma/LzmaEnc.h
+@@ -0,0 +1,80 @@
++/*  LzmaEnc.h -- LZMA Encoder
++2009-02-07 : Igor Pavlov : Public domain */
++
++#ifndef __LZMA_ENC_H
++#define __LZMA_ENC_H
++
++#include "Types.h"
++
++#ifdef __cplusplus
++extern "C" {
++#endif
++
++#define LZMA_PROPS_SIZE 5
++
++typedef struct _CLzmaEncProps
++{
++  int level;       /*  0 <= level <= 9 */
++  UInt32 dictSize; /* (1 << 12) <= dictSize <= (1 << 27) for 32-bit version
++                      (1 << 12) <= dictSize <= (1 << 30) for 64-bit version
++                       default = (1 << 24) */
++  int lc;          /* 0 <= lc <= 8, default = 3 */
++  int lp;          /* 0 <= lp <= 4, default = 0 */
++  int pb;          /* 0 <= pb <= 4, default = 2 */
++  int algo;        /* 0 - fast, 1 - normal, default = 1 */
++  int fb;          /* 5 <= fb <= 273, default = 32 */
++  int btMode;      /* 0 - hashChain Mode, 1 - binTree mode - normal, default = 1 */
++  int numHashBytes; /* 2, 3 or 4, default = 4 */
++  UInt32 mc;        /* 1 <= mc <= (1 << 30), default = 32 */
++  unsigned writeEndMark;  /* 0 - do not write EOPM, 1 - write EOPM, default = 0 */
++  int numThreads;  /* 1 or 2, default = 2 */
++} CLzmaEncProps;
++
++void LzmaEncProps_Init(CLzmaEncProps *p);
++void LzmaEncProps_Normalize(CLzmaEncProps *p);
++UInt32 LzmaEncProps_GetDictSize(const CLzmaEncProps *props2);
++
++
++/* ---------- CLzmaEncHandle Interface ---------- */
++
++/* LzmaEnc_* functions can return the following exit codes:
++Returns:
++  SZ_OK           - OK
++  SZ_ERROR_MEM    - Memory allocation error
++  SZ_ERROR_PARAM  - Incorrect paramater in props
++  SZ_ERROR_WRITE  - Write callback error.
++  SZ_ERROR_PROGRESS - some break from progress callback
++  SZ_ERROR_THREAD - errors in multithreading functions (only for Mt version)
++*/
++
++typedef void * CLzmaEncHandle;
++
++CLzmaEncHandle LzmaEnc_Create(ISzAlloc *alloc);
++void LzmaEnc_Destroy(CLzmaEncHandle p, ISzAlloc *alloc, ISzAlloc *allocBig);
++SRes LzmaEnc_SetProps(CLzmaEncHandle p, const CLzmaEncProps *props);
++SRes LzmaEnc_WriteProperties(CLzmaEncHandle p, Byte *properties, SizeT *size);
++SRes LzmaEnc_Encode(CLzmaEncHandle p, ISeqOutStream *outStream, ISeqInStream *inStream,
++    ICompressProgress *progress, ISzAlloc *alloc, ISzAlloc *allocBig);
++SRes LzmaEnc_MemEncode(CLzmaEncHandle p, Byte *dest, SizeT *destLen, const Byte *src, SizeT srcLen,
++    int writeEndMark, ICompressProgress *progress, ISzAlloc *alloc, ISzAlloc *allocBig);
++
++/* ---------- One Call Interface ---------- */
++
++/* LzmaEncode
++Return code:
++  SZ_OK               - OK
++  SZ_ERROR_MEM        - Memory allocation error
++  SZ_ERROR_PARAM      - Incorrect paramater
++  SZ_ERROR_OUTPUT_EOF - output buffer overflow
++  SZ_ERROR_THREAD     - errors in multithreading functions (only for Mt version)
++*/
++
++SRes LzmaEncode(Byte *dest, SizeT *destLen, const Byte *src, SizeT srcLen,
++    const CLzmaEncProps *props, Byte *propsEncoded, SizeT *propsSize, int writeEndMark,
++    ICompressProgress *progress, ISzAlloc *alloc, ISzAlloc *allocBig);
++
++#ifdef __cplusplus
++}
++#endif
++
++#endif
+--- /dev/null
++++ b/include/linux/lzma/Types.h
+@@ -0,0 +1,226 @@
++/* Types.h -- Basic types
++2009-11-23 : Igor Pavlov : Public domain */
++
++#ifndef __7Z_TYPES_H
++#define __7Z_TYPES_H
++
++#include <stddef.h>
++
++#ifdef _WIN32
++#include <windows.h>
++#endif
++
++#ifndef EXTERN_C_BEGIN
++#ifdef __cplusplus
++#define EXTERN_C_BEGIN extern "C" {
++#define EXTERN_C_END }
++#else
++#define EXTERN_C_BEGIN
++#define EXTERN_C_END
++#endif
++#endif
++
++EXTERN_C_BEGIN
++
++#define SZ_OK 0
++
++#define SZ_ERROR_DATA 1
++#define SZ_ERROR_MEM 2
++#define SZ_ERROR_CRC 3
++#define SZ_ERROR_UNSUPPORTED 4
++#define SZ_ERROR_PARAM 5
++#define SZ_ERROR_INPUT_EOF 6
++#define SZ_ERROR_OUTPUT_EOF 7
++#define SZ_ERROR_READ 8
++#define SZ_ERROR_WRITE 9
++#define SZ_ERROR_PROGRESS 10
++#define SZ_ERROR_FAIL 11
++#define SZ_ERROR_THREAD 12
++
++#define SZ_ERROR_ARCHIVE 16
++#define SZ_ERROR_NO_ARCHIVE 17
++
++typedef int SRes;
++
++#ifdef _WIN32
++typedef DWORD WRes;
++#else
++typedef int WRes;
++#endif
++
++#ifndef RINOK
++#define RINOK(x) { int __result__ = (x); if (__result__ != 0) return __result__; }
++#endif
++
++typedef unsigned char Byte;
++typedef short Int16;
++typedef unsigned short UInt16;
++
++#ifdef _LZMA_UINT32_IS_ULONG
++typedef long Int32;
++typedef unsigned long UInt32;
++#else
++typedef int Int32;
++typedef unsigned int UInt32;
++#endif
++
++#ifdef _SZ_NO_INT_64
++
++/* define _SZ_NO_INT_64, if your compiler doesn't support 64-bit integers.
++   NOTES: Some code will work incorrectly in that case! */
++
++typedef long Int64;
++typedef unsigned long UInt64;
++
++#else
++
++#if defined(_MSC_VER) || defined(__BORLANDC__)
++typedef __int64 Int64;
++typedef unsigned __int64 UInt64;
++#else
++typedef long long int Int64;
++typedef unsigned long long int UInt64;
++#endif
++
++#endif
++
++#ifdef _LZMA_NO_SYSTEM_SIZE_T
++typedef UInt32 SizeT;
++#else
++typedef size_t SizeT;
++#endif
++
++typedef int Bool;
++#define True 1
++#define False 0
++
++
++#ifdef _WIN32
++#define MY_STD_CALL __stdcall
++#else
++#define MY_STD_CALL
++#endif
++
++#ifdef _MSC_VER
++
++#if _MSC_VER >= 1300
++#define MY_NO_INLINE __declspec(noinline)
++#else
++#define MY_NO_INLINE
++#endif
++
++#define MY_CDECL __cdecl
++#define MY_FAST_CALL __fastcall
++
++#else
++
++#define MY_CDECL
++#define MY_FAST_CALL
++
++#endif
++
++
++/* The following interfaces use first parameter as pointer to structure */
++
++typedef struct
++{
++  SRes (*Read)(void *p, void *buf, size_t *size);
++    /* if (input(*size) != 0 && output(*size) == 0) means end_of_stream.
++       (output(*size) < input(*size)) is allowed */
++} ISeqInStream;
++
++/* it can return SZ_ERROR_INPUT_EOF */
++SRes SeqInStream_Read(ISeqInStream *stream, void *buf, size_t size);
++SRes SeqInStream_Read2(ISeqInStream *stream, void *buf, size_t size, SRes errorType);
++SRes SeqInStream_ReadByte(ISeqInStream *stream, Byte *buf);
++
++typedef struct
++{
++  size_t (*Write)(void *p, const void *buf, size_t size);
++    /* Returns: result - the number of actually written bytes.
++       (result < size) means error */
++} ISeqOutStream;
++
++typedef enum
++{
++  SZ_SEEK_SET = 0,
++  SZ_SEEK_CUR = 1,
++  SZ_SEEK_END = 2
++} ESzSeek;
++
++typedef struct
++{
++  SRes (*Read)(void *p, void *buf, size_t *size);  /* same as ISeqInStream::Read */
++  SRes (*Seek)(void *p, Int64 *pos, ESzSeek origin);
++} ISeekInStream;
++
++typedef struct
++{
++  SRes (*Look)(void *p, void **buf, size_t *size);
++    /* if (input(*size) != 0 && output(*size) == 0) means end_of_stream.
++       (output(*size) > input(*size)) is not allowed
++       (output(*size) < input(*size)) is allowed */
++  SRes (*Skip)(void *p, size_t offset);
++    /* offset must be <= output(*size) of Look */
++
++  SRes (*Read)(void *p, void *buf, size_t *size);
++    /* reads directly (without buffer). It's same as ISeqInStream::Read */
++  SRes (*Seek)(void *p, Int64 *pos, ESzSeek origin);
++} ILookInStream;
++
++SRes LookInStream_LookRead(ILookInStream *stream, void *buf, size_t *size);
++SRes LookInStream_SeekTo(ILookInStream *stream, UInt64 offset);
++
++/* reads via ILookInStream::Read */
++SRes LookInStream_Read2(ILookInStream *stream, void *buf, size_t size, SRes errorType);
++SRes LookInStream_Read(ILookInStream *stream, void *buf, size_t size);
++
++#define LookToRead_BUF_SIZE (1 << 14)
++
++typedef struct
++{
++  ILookInStream s;
++  ISeekInStream *realStream;
++  size_t pos;
++  size_t size;
++  Byte buf[LookToRead_BUF_SIZE];
++} CLookToRead;
++
++void LookToRead_CreateVTable(CLookToRead *p, int lookahead);
++void LookToRead_Init(CLookToRead *p);
++
++typedef struct
++{
++  ISeqInStream s;
++  ILookInStream *realStream;
++} CSecToLook;
++
++void SecToLook_CreateVTable(CSecToLook *p);
++
++typedef struct
++{
++  ISeqInStream s;
++  ILookInStream *realStream;
++} CSecToRead;
++
++void SecToRead_CreateVTable(CSecToRead *p);
++
++typedef struct
++{
++  SRes (*Progress)(void *p, UInt64 inSize, UInt64 outSize);
++    /* Returns: result. (result != SZ_OK) means break.
++       Value (UInt64)(Int64)-1 for size means unknown value. */
++} ICompressProgress;
++
++typedef struct
++{
++  void *(*Alloc)(void *p, size_t size);
++  void (*Free)(void *p, void *address); /* address can be 0 */
++} ISzAlloc;
++
++#define IAlloc_Alloc(p, size) (p)->Alloc((p), size)
++#define IAlloc_Free(p, a) (p)->Free((p), a)
++
++EXTERN_C_END
++
++#endif
+--- a/include/uapi/linux/jffs2.h
++++ b/include/uapi/linux/jffs2.h
+@@ -46,6 +46,7 @@
+ #define JFFS2_COMPR_DYNRUBIN	0x05
+ #define JFFS2_COMPR_ZLIB	0x06
+ #define JFFS2_COMPR_LZO		0x07
++#define JFFS2_COMPR_LZMA	0x08
+ /* Compatibility flags. */
+ #define JFFS2_COMPAT_MASK 0xc000      /* What do to if an unknown nodetype is found */
+ #define JFFS2_NODE_ACCURATE 0x2000
+--- a/lib/Kconfig
++++ b/lib/Kconfig
+@@ -278,6 +278,12 @@ config ZSTD_DECOMPRESS
+ 
+ source "lib/xz/Kconfig"
+ 
++config LZMA_COMPRESS
++    tristate
++
++config LZMA_DECOMPRESS
++    tristate
++
+ #
+ # These all provide a common interface (hence the apparent duplication with
+ # ZLIB_INFLATE; DECOMPRESS_GZIP is just a wrapper.)
+--- a/lib/Makefile
++++ b/lib/Makefile
+@@ -3,6 +3,16 @@
+ # Makefile for some libs needed in the kernel.
+ #
+ 
++ifdef CONFIG_JFFS2_ZLIB
++	CONFIG_ZLIB_INFLATE:=y
++	CONFIG_ZLIB_DEFLATE:=y
++endif
++
++ifdef CONFIG_JFFS2_LZMA
++	CONFIG_LZMA_DECOMPRESS:=y
++	CONFIG_LZMA_COMPRESS:=y
++endif
++
+ ifdef CONFIG_FUNCTION_TRACER
+ ORIG_CFLAGS := $(KBUILD_CFLAGS)
+ KBUILD_CFLAGS = $(subst $(CC_FLAGS_FTRACE),,$(ORIG_CFLAGS))
+@@ -139,6 +149,8 @@ obj-$(CONFIG_ZSTD_COMPRESS) += zstd/
+ obj-$(CONFIG_ZSTD_DECOMPRESS) += zstd/
+ obj-$(CONFIG_XZ_DEC) += xz/
+ obj-$(CONFIG_RAID6_PQ) += raid6/
++obj-$(CONFIG_LZMA_COMPRESS) += lzma/
++obj-$(CONFIG_LZMA_DECOMPRESS) += lzma/
+ 
+ lib-$(CONFIG_DECOMPRESS_GZIP) += decompress_inflate.o
+ lib-$(CONFIG_DECOMPRESS_BZIP2) += decompress_bunzip2.o
+--- /dev/null
++++ b/lib/lzma/LzFind.c
+@@ -0,0 +1,761 @@
++/* LzFind.c -- Match finder for LZ algorithms
++2009-04-22 : Igor Pavlov : Public domain */
++
++#include <string.h>
++
++#include "LzFind.h"
++#include "LzHash.h"
++
++#define kEmptyHashValue 0
++#define kMaxValForNormalize ((UInt32)0xFFFFFFFF)
++#define kNormalizeStepMin (1 << 10) /* it must be power of 2 */
++#define kNormalizeMask (~(kNormalizeStepMin - 1))
++#define kMaxHistorySize ((UInt32)3 << 30)
++
++#define kStartMaxLen 3
++
++static void LzInWindow_Free(CMatchFinder *p, ISzAlloc *alloc)
++{
++  if (!p->directInput)
++  {
++    alloc->Free(alloc, p->bufferBase);
++    p->bufferBase = 0;
++  }
++}
++
++/* keepSizeBefore + keepSizeAfter + keepSizeReserv must be < 4G) */
++
++static int LzInWindow_Create(CMatchFinder *p, UInt32 keepSizeReserv, ISzAlloc *alloc)
++{
++  UInt32 blockSize = p->keepSizeBefore + p->keepSizeAfter + keepSizeReserv;
++  if (p->directInput)
++  {
++    p->blockSize = blockSize;
++    return 1;
++  }
++  if (p->bufferBase == 0 || p->blockSize != blockSize)
++  {
++    LzInWindow_Free(p, alloc);
++    p->blockSize = blockSize;
++    p->bufferBase = (Byte *)alloc->Alloc(alloc, (size_t)blockSize);
++  }
++  return (p->bufferBase != 0);
++}
++
++Byte *MatchFinder_GetPointerToCurrentPos(CMatchFinder *p) { return p->buffer; }
++Byte MatchFinder_GetIndexByte(CMatchFinder *p, Int32 index) { return p->buffer[index]; }
++
++UInt32 MatchFinder_GetNumAvailableBytes(CMatchFinder *p) { return p->streamPos - p->pos; }
++
++void MatchFinder_ReduceOffsets(CMatchFinder *p, UInt32 subValue)
++{
++  p->posLimit -= subValue;
++  p->pos -= subValue;
++  p->streamPos -= subValue;
++}
++
++static void MatchFinder_ReadBlock(CMatchFinder *p)
++{
++  if (p->streamEndWasReached || p->result != SZ_OK)
++    return;
++  if (p->directInput)
++  {
++    UInt32 curSize = 0xFFFFFFFF - p->streamPos;
++    if (curSize > p->directInputRem)
++      curSize = (UInt32)p->directInputRem;
++    p->directInputRem -= curSize;
++    p->streamPos += curSize;
++    if (p->directInputRem == 0)
++      p->streamEndWasReached = 1;
++    return;
++  }
++  for (;;)
++  {
++    Byte *dest = p->buffer + (p->streamPos - p->pos);
++    size_t size = (p->bufferBase + p->blockSize - dest);
++    if (size == 0)
++      return;
++    p->result = p->stream->Read(p->stream, dest, &size);
++    if (p->result != SZ_OK)
++      return;
++    if (size == 0)
++    {
++      p->streamEndWasReached = 1;
++      return;
++    }
++    p->streamPos += (UInt32)size;
++    if (p->streamPos - p->pos > p->keepSizeAfter)
++      return;
++  }
++}
++
++void MatchFinder_MoveBlock(CMatchFinder *p)
++{
++  memmove(p->bufferBase,
++    p->buffer - p->keepSizeBefore,
++    (size_t)(p->streamPos - p->pos + p->keepSizeBefore));
++  p->buffer = p->bufferBase + p->keepSizeBefore;
++}
++
++int MatchFinder_NeedMove(CMatchFinder *p)
++{
++  if (p->directInput)
++    return 0;
++  /* if (p->streamEndWasReached) return 0; */
++  return ((size_t)(p->bufferBase + p->blockSize - p->buffer) <= p->keepSizeAfter);
++}
++
++void MatchFinder_ReadIfRequired(CMatchFinder *p)
++{
++  if (p->streamEndWasReached)
++    return;
++  if (p->keepSizeAfter >= p->streamPos - p->pos)
++    MatchFinder_ReadBlock(p);
++}
++
++static void MatchFinder_CheckAndMoveAndRead(CMatchFinder *p)
++{
++  if (MatchFinder_NeedMove(p))
++    MatchFinder_MoveBlock(p);
++  MatchFinder_ReadBlock(p);
++}
++
++static void MatchFinder_SetDefaultSettings(CMatchFinder *p)
++{
++  p->cutValue = 32;
++  p->btMode = 1;
++  p->numHashBytes = 4;
++  p->bigHash = 0;
++}
++
++#define kCrcPoly 0xEDB88320
++
++void MatchFinder_Construct(CMatchFinder *p)
++{
++  UInt32 i;
++  p->bufferBase = 0;
++  p->directInput = 0;
++  p->hash = 0;
++  MatchFinder_SetDefaultSettings(p);
++
++  for (i = 0; i < 256; i++)
++  {
++    UInt32 r = i;
++    int j;
++    for (j = 0; j < 8; j++)
++      r = (r >> 1) ^ (kCrcPoly & ~((r & 1) - 1));
++    p->crc[i] = r;
++  }
++}
++
++static void MatchFinder_FreeThisClassMemory(CMatchFinder *p, ISzAlloc *alloc)
++{
++  alloc->Free(alloc, p->hash);
++  p->hash = 0;
++}
++
++void MatchFinder_Free(CMatchFinder *p, ISzAlloc *alloc)
++{
++  MatchFinder_FreeThisClassMemory(p, alloc);
++  LzInWindow_Free(p, alloc);
++}
++
++static CLzRef* AllocRefs(UInt32 num, ISzAlloc *alloc)
++{
++  size_t sizeInBytes = (size_t)num * sizeof(CLzRef);
++  if (sizeInBytes / sizeof(CLzRef) != num)
++    return 0;
++  return (CLzRef *)alloc->Alloc(alloc, sizeInBytes);
++}
++
++int MatchFinder_Create(CMatchFinder *p, UInt32 historySize,
++    UInt32 keepAddBufferBefore, UInt32 matchMaxLen, UInt32 keepAddBufferAfter,
++    ISzAlloc *alloc)
++{
++  UInt32 sizeReserv;
++  if (historySize > kMaxHistorySize)
++  {
++    MatchFinder_Free(p, alloc);
++    return 0;
++  }
++  sizeReserv = historySize >> 1;
++  if (historySize > ((UInt32)2 << 30))
++    sizeReserv = historySize >> 2;
++  sizeReserv += (keepAddBufferBefore + matchMaxLen + keepAddBufferAfter) / 2 + (1 << 19);
++
++  p->keepSizeBefore = historySize + keepAddBufferBefore + 1;
++  p->keepSizeAfter = matchMaxLen + keepAddBufferAfter;
++  /* we need one additional byte, since we use MoveBlock after pos++ and before dictionary using */
++  if (LzInWindow_Create(p, sizeReserv, alloc))
++  {
++    UInt32 newCyclicBufferSize = historySize + 1;
++    UInt32 hs;
++    p->matchMaxLen = matchMaxLen;
++    {
++      p->fixedHashSize = 0;
++      if (p->numHashBytes == 2)
++        hs = (1 << 16) - 1;
++      else
++      {
++        hs = historySize - 1;
++        hs |= (hs >> 1);
++        hs |= (hs >> 2);
++        hs |= (hs >> 4);
++        hs |= (hs >> 8);
++        hs >>= 1;
++        hs |= 0xFFFF; /* don't change it! It's required for Deflate */
++        if (hs > (1 << 24))
++        {
++          if (p->numHashBytes == 3)
++            hs = (1 << 24) - 1;
++          else
++            hs >>= 1;
++        }
++      }
++      p->hashMask = hs;
++      hs++;
++      if (p->numHashBytes > 2) p->fixedHashSize += kHash2Size;
++      if (p->numHashBytes > 3) p->fixedHashSize += kHash3Size;
++      if (p->numHashBytes > 4) p->fixedHashSize += kHash4Size;
++      hs += p->fixedHashSize;
++    }
++
++    {
++      UInt32 prevSize = p->hashSizeSum + p->numSons;
++      UInt32 newSize;
++      p->historySize = historySize;
++      p->hashSizeSum = hs;
++      p->cyclicBufferSize = newCyclicBufferSize;
++      p->numSons = (p->btMode ? newCyclicBufferSize * 2 : newCyclicBufferSize);
++      newSize = p->hashSizeSum + p->numSons;
++      if (p->hash != 0 && prevSize == newSize)
++        return 1;
++      MatchFinder_FreeThisClassMemory(p, alloc);
++      p->hash = AllocRefs(newSize, alloc);
++      if (p->hash != 0)
++      {
++        p->son = p->hash + p->hashSizeSum;
++        return 1;
++      }
++    }
++  }
++  MatchFinder_Free(p, alloc);
++  return 0;
++}
++
++static void MatchFinder_SetLimits(CMatchFinder *p)
++{
++  UInt32 limit = kMaxValForNormalize - p->pos;
++  UInt32 limit2 = p->cyclicBufferSize - p->cyclicBufferPos;
++  if (limit2 < limit)
++    limit = limit2;
++  limit2 = p->streamPos - p->pos;
++  if (limit2 <= p->keepSizeAfter)
++  {
++    if (limit2 > 0)
++      limit2 = 1;
++  }
++  else
++    limit2 -= p->keepSizeAfter;
++  if (limit2 < limit)
++    limit = limit2;
++  {
++    UInt32 lenLimit = p->streamPos - p->pos;
++    if (lenLimit > p->matchMaxLen)
++      lenLimit = p->matchMaxLen;
++    p->lenLimit = lenLimit;
++  }
++  p->posLimit = p->pos + limit;
++}
++
++void MatchFinder_Init(CMatchFinder *p)
++{
++  UInt32 i;
++  for (i = 0; i < p->hashSizeSum; i++)
++    p->hash[i] = kEmptyHashValue;
++  p->cyclicBufferPos = 0;
++  p->buffer = p->bufferBase;
++  p->pos = p->streamPos = p->cyclicBufferSize;
++  p->result = SZ_OK;
++  p->streamEndWasReached = 0;
++  MatchFinder_ReadBlock(p);
++  MatchFinder_SetLimits(p);
++}
++
++static UInt32 MatchFinder_GetSubValue(CMatchFinder *p)
++{
++  return (p->pos - p->historySize - 1) & kNormalizeMask;
++}
++
++void MatchFinder_Normalize3(UInt32 subValue, CLzRef *items, UInt32 numItems)
++{
++  UInt32 i;
++  for (i = 0; i < numItems; i++)
++  {
++    UInt32 value = items[i];
++    if (value <= subValue)
++      value = kEmptyHashValue;
++    else
++      value -= subValue;
++    items[i] = value;
++  }
++}
++
++static void MatchFinder_Normalize(CMatchFinder *p)
++{
++  UInt32 subValue = MatchFinder_GetSubValue(p);
++  MatchFinder_Normalize3(subValue, p->hash, p->hashSizeSum + p->numSons);
++  MatchFinder_ReduceOffsets(p, subValue);
++}
++
++static void MatchFinder_CheckLimits(CMatchFinder *p)
++{
++  if (p->pos == kMaxValForNormalize)
++    MatchFinder_Normalize(p);
++  if (!p->streamEndWasReached && p->keepSizeAfter == p->streamPos - p->pos)
++    MatchFinder_CheckAndMoveAndRead(p);
++  if (p->cyclicBufferPos == p->cyclicBufferSize)
++    p->cyclicBufferPos = 0;
++  MatchFinder_SetLimits(p);
++}
++
++static UInt32 * Hc_GetMatchesSpec(UInt32 lenLimit, UInt32 curMatch, UInt32 pos, const Byte *cur, CLzRef *son,
++    UInt32 _cyclicBufferPos, UInt32 _cyclicBufferSize, UInt32 cutValue,
++    UInt32 *distances, UInt32 maxLen)
++{
++  son[_cyclicBufferPos] = curMatch;
++  for (;;)
++  {
++    UInt32 delta = pos - curMatch;
++    if (cutValue-- == 0 || delta >= _cyclicBufferSize)
++      return distances;
++    {
++      const Byte *pb = cur - delta;
++      curMatch = son[_cyclicBufferPos - delta + ((delta > _cyclicBufferPos) ? _cyclicBufferSize : 0)];
++      if (pb[maxLen] == cur[maxLen] && *pb == *cur)
++      {
++        UInt32 len = 0;
++        while (++len != lenLimit)
++          if (pb[len] != cur[len])
++            break;
++        if (maxLen < len)
++        {
++          *distances++ = maxLen = len;
++          *distances++ = delta - 1;
++          if (len == lenLimit)
++            return distances;
++        }
++      }
++    }
++  }
++}
++
++UInt32 * GetMatchesSpec1(UInt32 lenLimit, UInt32 curMatch, UInt32 pos, const Byte *cur, CLzRef *son,
++    UInt32 _cyclicBufferPos, UInt32 _cyclicBufferSize, UInt32 cutValue,
++    UInt32 *distances, UInt32 maxLen)
++{
++  CLzRef *ptr0 = son + (_cyclicBufferPos << 1) + 1;
++  CLzRef *ptr1 = son + (_cyclicBufferPos << 1);
++  UInt32 len0 = 0, len1 = 0;
++  for (;;)
++  {
++    UInt32 delta = pos - curMatch;
++    if (cutValue-- == 0 || delta >= _cyclicBufferSize)
++    {
++      *ptr0 = *ptr1 = kEmptyHashValue;
++      return distances;
++    }
++    {
++      CLzRef *pair = son + ((_cyclicBufferPos - delta + ((delta > _cyclicBufferPos) ? _cyclicBufferSize : 0)) << 1);
++      const Byte *pb = cur - delta;
++      UInt32 len = (len0 < len1 ? len0 : len1);
++      if (pb[len] == cur[len])
++      {
++        if (++len != lenLimit && pb[len] == cur[len])
++          while (++len != lenLimit)
++            if (pb[len] != cur[len])
++              break;
++        if (maxLen < len)
++        {
++          *distances++ = maxLen = len;
++          *distances++ = delta - 1;
++          if (len == lenLimit)
++          {
++            *ptr1 = pair[0];
++            *ptr0 = pair[1];
++            return distances;
++          }
++        }
++      }
++      if (pb[len] < cur[len])
++      {
++        *ptr1 = curMatch;
++        ptr1 = pair + 1;
++        curMatch = *ptr1;
++        len1 = len;
++      }
++      else
++      {
++        *ptr0 = curMatch;
++        ptr0 = pair;
++        curMatch = *ptr0;
++        len0 = len;
++      }
++    }
++  }
++}
++
++static void SkipMatchesSpec(UInt32 lenLimit, UInt32 curMatch, UInt32 pos, const Byte *cur, CLzRef *son,
++    UInt32 _cyclicBufferPos, UInt32 _cyclicBufferSize, UInt32 cutValue)
++{
++  CLzRef *ptr0 = son + (_cyclicBufferPos << 1) + 1;
++  CLzRef *ptr1 = son + (_cyclicBufferPos << 1);
++  UInt32 len0 = 0, len1 = 0;
++  for (;;)
++  {
++    UInt32 delta = pos - curMatch;
++    if (cutValue-- == 0 || delta >= _cyclicBufferSize)
++    {
++      *ptr0 = *ptr1 = kEmptyHashValue;
++      return;
++    }
++    {
++      CLzRef *pair = son + ((_cyclicBufferPos - delta + ((delta > _cyclicBufferPos) ? _cyclicBufferSize : 0)) << 1);
++      const Byte *pb = cur - delta;
++      UInt32 len = (len0 < len1 ? len0 : len1);
++      if (pb[len] == cur[len])
++      {
++        while (++len != lenLimit)
++          if (pb[len] != cur[len])
++            break;
++        {
++          if (len == lenLimit)
++          {
++            *ptr1 = pair[0];
++            *ptr0 = pair[1];
++            return;
++          }
++        }
++      }
++      if (pb[len] < cur[len])
++      {
++        *ptr1 = curMatch;
++        ptr1 = pair + 1;
++        curMatch = *ptr1;
++        len1 = len;
++      }
++      else
++      {
++        *ptr0 = curMatch;
++        ptr0 = pair;
++        curMatch = *ptr0;
++        len0 = len;
++      }
++    }
++  }
++}
++
++#define MOVE_POS \
++  ++p->cyclicBufferPos; \
++  p->buffer++; \
++  if (++p->pos == p->posLimit) MatchFinder_CheckLimits(p);
++
++#define MOVE_POS_RET MOVE_POS return offset;
++
++static void MatchFinder_MovePos(CMatchFinder *p) { MOVE_POS; }
++
++#define GET_MATCHES_HEADER2(minLen, ret_op) \
++  UInt32 lenLimit; UInt32 hashValue; const Byte *cur; UInt32 curMatch; \
++  lenLimit = p->lenLimit; { if (lenLimit < minLen) { MatchFinder_MovePos(p); ret_op; }} \
++  cur = p->buffer;
++
++#define GET_MATCHES_HEADER(minLen) GET_MATCHES_HEADER2(minLen, return 0)
++#define SKIP_HEADER(minLen)        GET_MATCHES_HEADER2(minLen, continue)
++
++#define MF_PARAMS(p) p->pos, p->buffer, p->son, p->cyclicBufferPos, p->cyclicBufferSize, p->cutValue
++
++#define GET_MATCHES_FOOTER(offset, maxLen) \
++  offset = (UInt32)(GetMatchesSpec1(lenLimit, curMatch, MF_PARAMS(p), \
++  distances + offset, maxLen) - distances); MOVE_POS_RET;
++
++#define SKIP_FOOTER \
++  SkipMatchesSpec(lenLimit, curMatch, MF_PARAMS(p)); MOVE_POS;
++
++static UInt32 Bt2_MatchFinder_GetMatches(CMatchFinder *p, UInt32 *distances)
++{
++  UInt32 offset;
++  GET_MATCHES_HEADER(2)
++  HASH2_CALC;
++  curMatch = p->hash[hashValue];
++  p->hash[hashValue] = p->pos;
++  offset = 0;
++  GET_MATCHES_FOOTER(offset, 1)
++}
++
++UInt32 Bt3Zip_MatchFinder_GetMatches(CMatchFinder *p, UInt32 *distances)
++{
++  UInt32 offset;
++  GET_MATCHES_HEADER(3)
++  HASH_ZIP_CALC;
++  curMatch = p->hash[hashValue];
++  p->hash[hashValue] = p->pos;
++  offset = 0;
++  GET_MATCHES_FOOTER(offset, 2)
++}
++
++static UInt32 Bt3_MatchFinder_GetMatches(CMatchFinder *p, UInt32 *distances)
++{
++  UInt32 hash2Value, delta2, maxLen, offset;
++  GET_MATCHES_HEADER(3)
++
++  HASH3_CALC;
++
++  delta2 = p->pos - p->hash[hash2Value];
++  curMatch = p->hash[kFix3HashSize + hashValue];
++  
++  p->hash[hash2Value] =
++  p->hash[kFix3HashSize + hashValue] = p->pos;
++
++
++  maxLen = 2;
++  offset = 0;
++  if (delta2 < p->cyclicBufferSize && *(cur - delta2) == *cur)
++  {
++    for (; maxLen != lenLimit; maxLen++)
++      if (cur[(ptrdiff_t)maxLen - delta2] != cur[maxLen])
++        break;
++    distances[0] = maxLen;
++    distances[1] = delta2 - 1;
++    offset = 2;
++    if (maxLen == lenLimit)
++    {
++      SkipMatchesSpec(lenLimit, curMatch, MF_PARAMS(p));
++      MOVE_POS_RET;
++    }
++  }
++  GET_MATCHES_FOOTER(offset, maxLen)
++}
++
++static UInt32 Bt4_MatchFinder_GetMatches(CMatchFinder *p, UInt32 *distances)
++{
++  UInt32 hash2Value, hash3Value, delta2, delta3, maxLen, offset;
++  GET_MATCHES_HEADER(4)
++
++  HASH4_CALC;
++
++  delta2 = p->pos - p->hash[                hash2Value];
++  delta3 = p->pos - p->hash[kFix3HashSize + hash3Value];
++  curMatch = p->hash[kFix4HashSize + hashValue];
++  
++  p->hash[                hash2Value] =
++  p->hash[kFix3HashSize + hash3Value] =
++  p->hash[kFix4HashSize + hashValue] = p->pos;
++
++  maxLen = 1;
++  offset = 0;
++  if (delta2 < p->cyclicBufferSize && *(cur - delta2) == *cur)
++  {
++    distances[0] = maxLen = 2;
++    distances[1] = delta2 - 1;
++    offset = 2;
++  }
++  if (delta2 != delta3 && delta3 < p->cyclicBufferSize && *(cur - delta3) == *cur)
++  {
++    maxLen = 3;
++    distances[offset + 1] = delta3 - 1;
++    offset += 2;
++    delta2 = delta3;
++  }
++  if (offset != 0)
++  {
++    for (; maxLen != lenLimit; maxLen++)
++      if (cur[(ptrdiff_t)maxLen - delta2] != cur[maxLen])
++        break;
++    distances[offset - 2] = maxLen;
++    if (maxLen == lenLimit)
++    {
++      SkipMatchesSpec(lenLimit, curMatch, MF_PARAMS(p));
++      MOVE_POS_RET;
++    }
++  }
++  if (maxLen < 3)
++    maxLen = 3;
++  GET_MATCHES_FOOTER(offset, maxLen)
++}
++
++static UInt32 Hc4_MatchFinder_GetMatches(CMatchFinder *p, UInt32 *distances)
++{
++  UInt32 hash2Value, hash3Value, delta2, delta3, maxLen, offset;
++  GET_MATCHES_HEADER(4)
++
++  HASH4_CALC;
++
++  delta2 = p->pos - p->hash[                hash2Value];
++  delta3 = p->pos - p->hash[kFix3HashSize + hash3Value];
++  curMatch = p->hash[kFix4HashSize + hashValue];
++
++  p->hash[                hash2Value] =
++  p->hash[kFix3HashSize + hash3Value] =
++  p->hash[kFix4HashSize + hashValue] = p->pos;
++
++  maxLen = 1;
++  offset = 0;
++  if (delta2 < p->cyclicBufferSize && *(cur - delta2) == *cur)
++  {
++    distances[0] = maxLen = 2;
++    distances[1] = delta2 - 1;
++    offset = 2;
++  }
++  if (delta2 != delta3 && delta3 < p->cyclicBufferSize && *(cur - delta3) == *cur)
++  {
++    maxLen = 3;
++    distances[offset + 1] = delta3 - 1;
++    offset += 2;
++    delta2 = delta3;
++  }
++  if (offset != 0)
++  {
++    for (; maxLen != lenLimit; maxLen++)
++      if (cur[(ptrdiff_t)maxLen - delta2] != cur[maxLen])
++        break;
++    distances[offset - 2] = maxLen;
++    if (maxLen == lenLimit)
++    {
++      p->son[p->cyclicBufferPos] = curMatch;
++      MOVE_POS_RET;
++    }
++  }
++  if (maxLen < 3)
++    maxLen = 3;
++  offset = (UInt32)(Hc_GetMatchesSpec(lenLimit, curMatch, MF_PARAMS(p),
++    distances + offset, maxLen) - (distances));
++  MOVE_POS_RET
++}
++
++UInt32 Hc3Zip_MatchFinder_GetMatches(CMatchFinder *p, UInt32 *distances)
++{
++  UInt32 offset;
++  GET_MATCHES_HEADER(3)
++  HASH_ZIP_CALC;
++  curMatch = p->hash[hashValue];
++  p->hash[hashValue] = p->pos;
++  offset = (UInt32)(Hc_GetMatchesSpec(lenLimit, curMatch, MF_PARAMS(p),
++    distances, 2) - (distances));
++  MOVE_POS_RET
++}
++
++static void Bt2_MatchFinder_Skip(CMatchFinder *p, UInt32 num)
++{
++  do
++  {
++    SKIP_HEADER(2)
++    HASH2_CALC;
++    curMatch = p->hash[hashValue];
++    p->hash[hashValue] = p->pos;
++    SKIP_FOOTER
++  }
++  while (--num != 0);
++}
++
++void Bt3Zip_MatchFinder_Skip(CMatchFinder *p, UInt32 num)
++{
++  do
++  {
++    SKIP_HEADER(3)
++    HASH_ZIP_CALC;
++    curMatch = p->hash[hashValue];
++    p->hash[hashValue] = p->pos;
++    SKIP_FOOTER
++  }
++  while (--num != 0);
++}
++
++static void Bt3_MatchFinder_Skip(CMatchFinder *p, UInt32 num)
++{
++  do
++  {
++    UInt32 hash2Value;
++    SKIP_HEADER(3)
++    HASH3_CALC;
++    curMatch = p->hash[kFix3HashSize + hashValue];
++    p->hash[hash2Value] =
++    p->hash[kFix3HashSize + hashValue] = p->pos;
++    SKIP_FOOTER
++  }
++  while (--num != 0);
++}
++
++static void Bt4_MatchFinder_Skip(CMatchFinder *p, UInt32 num)
++{
++  do
++  {
++    UInt32 hash2Value, hash3Value;
++    SKIP_HEADER(4)
++    HASH4_CALC;
++    curMatch = p->hash[kFix4HashSize + hashValue];
++    p->hash[                hash2Value] =
++    p->hash[kFix3HashSize + hash3Value] = p->pos;
++    p->hash[kFix4HashSize + hashValue] = p->pos;
++    SKIP_FOOTER
++  }
++  while (--num != 0);
++}
++
++static void Hc4_MatchFinder_Skip(CMatchFinder *p, UInt32 num)
++{
++  do
++  {
++    UInt32 hash2Value, hash3Value;
++    SKIP_HEADER(4)
++    HASH4_CALC;
++    curMatch = p->hash[kFix4HashSize + hashValue];
++    p->hash[                hash2Value] =
++    p->hash[kFix3HashSize + hash3Value] =
++    p->hash[kFix4HashSize + hashValue] = p->pos;
++    p->son[p->cyclicBufferPos] = curMatch;
++    MOVE_POS
++  }
++  while (--num != 0);
++}
++
++void Hc3Zip_MatchFinder_Skip(CMatchFinder *p, UInt32 num)
++{
++  do
++  {
++    SKIP_HEADER(3)
++    HASH_ZIP_CALC;
++    curMatch = p->hash[hashValue];
++    p->hash[hashValue] = p->pos;
++    p->son[p->cyclicBufferPos] = curMatch;
++    MOVE_POS
++  }
++  while (--num != 0);
++}
++
++void MatchFinder_CreateVTable(CMatchFinder *p, IMatchFinder *vTable)
++{
++  vTable->Init = (Mf_Init_Func)MatchFinder_Init;
++  vTable->GetIndexByte = (Mf_GetIndexByte_Func)MatchFinder_GetIndexByte;
++  vTable->GetNumAvailableBytes = (Mf_GetNumAvailableBytes_Func)MatchFinder_GetNumAvailableBytes;
++  vTable->GetPointerToCurrentPos = (Mf_GetPointerToCurrentPos_Func)MatchFinder_GetPointerToCurrentPos;
++  if (!p->btMode)
++  {
++    vTable->GetMatches = (Mf_GetMatches_Func)Hc4_MatchFinder_GetMatches;
++    vTable->Skip = (Mf_Skip_Func)Hc4_MatchFinder_Skip;
++  }
++  else if (p->numHashBytes == 2)
++  {
++    vTable->GetMatches = (Mf_GetMatches_Func)Bt2_MatchFinder_GetMatches;
++    vTable->Skip = (Mf_Skip_Func)Bt2_MatchFinder_Skip;
++  }
++  else if (p->numHashBytes == 3)
++  {
++    vTable->GetMatches = (Mf_GetMatches_Func)Bt3_MatchFinder_GetMatches;
++    vTable->Skip = (Mf_Skip_Func)Bt3_MatchFinder_Skip;
++  }
++  else
++  {
++    vTable->GetMatches = (Mf_GetMatches_Func)Bt4_MatchFinder_GetMatches;
++    vTable->Skip = (Mf_Skip_Func)Bt4_MatchFinder_Skip;
++  }
++}
+--- /dev/null
++++ b/lib/lzma/LzmaDec.c
+@@ -0,0 +1,999 @@
++/* LzmaDec.c -- LZMA Decoder
++2009-09-20 : Igor Pavlov : Public domain */
++
++#include "LzmaDec.h"
++
++#include <string.h>
++
++#define kNumTopBits 24
++#define kTopValue ((UInt32)1 << kNumTopBits)
++
++#define kNumBitModelTotalBits 11
++#define kBitModelTotal (1 << kNumBitModelTotalBits)
++#define kNumMoveBits 5
++
++#define RC_INIT_SIZE 5
++
++#define NORMALIZE if (range < kTopValue) { range <<= 8; code = (code << 8) | (*buf++); }
++
++#define IF_BIT_0(p) ttt = *(p); NORMALIZE; bound = (range >> kNumBitModelTotalBits) * ttt; if (code < bound)
++#define UPDATE_0(p) range = bound; *(p) = (CLzmaProb)(ttt + ((kBitModelTotal - ttt) >> kNumMoveBits));
++#define UPDATE_1(p) range -= bound; code -= bound; *(p) = (CLzmaProb)(ttt - (ttt >> kNumMoveBits));
++#define GET_BIT2(p, i, A0, A1) IF_BIT_0(p) \
++  { UPDATE_0(p); i = (i + i); A0; } else \
++  { UPDATE_1(p); i = (i + i) + 1; A1; }
++#define GET_BIT(p, i) GET_BIT2(p, i, ; , ;)
++
++#define TREE_GET_BIT(probs, i) { GET_BIT((probs + i), i); }
++#define TREE_DECODE(probs, limit, i) \
++  { i = 1; do { TREE_GET_BIT(probs, i); } while (i < limit); i -= limit; }
++
++/* #define _LZMA_SIZE_OPT */
++
++#ifdef _LZMA_SIZE_OPT
++#define TREE_6_DECODE(probs, i) TREE_DECODE(probs, (1 << 6), i)
++#else
++#define TREE_6_DECODE(probs, i) \
++  { i = 1; \
++  TREE_GET_BIT(probs, i); \
++  TREE_GET_BIT(probs, i); \
++  TREE_GET_BIT(probs, i); \
++  TREE_GET_BIT(probs, i); \
++  TREE_GET_BIT(probs, i); \
++  TREE_GET_BIT(probs, i); \
++  i -= 0x40; }
++#endif
++
++#define NORMALIZE_CHECK if (range < kTopValue) { if (buf >= bufLimit) return DUMMY_ERROR; range <<= 8; code = (code << 8) | (*buf++); }
++
++#define IF_BIT_0_CHECK(p) ttt = *(p); NORMALIZE_CHECK; bound = (range >> kNumBitModelTotalBits) * ttt; if (code < bound)
++#define UPDATE_0_CHECK range = bound;
++#define UPDATE_1_CHECK range -= bound; code -= bound;
++#define GET_BIT2_CHECK(p, i, A0, A1) IF_BIT_0_CHECK(p) \
++  { UPDATE_0_CHECK; i = (i + i); A0; } else \
++  { UPDATE_1_CHECK; i = (i + i) + 1; A1; }
++#define GET_BIT_CHECK(p, i) GET_BIT2_CHECK(p, i, ; , ;)
++#define TREE_DECODE_CHECK(probs, limit, i) \
++  { i = 1; do { GET_BIT_CHECK(probs + i, i) } while (i < limit); i -= limit; }
++
++
++#define kNumPosBitsMax 4
++#define kNumPosStatesMax (1 << kNumPosBitsMax)
++
++#define kLenNumLowBits 3
++#define kLenNumLowSymbols (1 << kLenNumLowBits)
++#define kLenNumMidBits 3
++#define kLenNumMidSymbols (1 << kLenNumMidBits)
++#define kLenNumHighBits 8
++#define kLenNumHighSymbols (1 << kLenNumHighBits)
++
++#define LenChoice 0
++#define LenChoice2 (LenChoice + 1)
++#define LenLow (LenChoice2 + 1)
++#define LenMid (LenLow + (kNumPosStatesMax << kLenNumLowBits))
++#define LenHigh (LenMid + (kNumPosStatesMax << kLenNumMidBits))
++#define kNumLenProbs (LenHigh + kLenNumHighSymbols)
++
++
++#define kNumStates 12
++#define kNumLitStates 7
++
++#define kStartPosModelIndex 4
++#define kEndPosModelIndex 14
++#define kNumFullDistances (1 << (kEndPosModelIndex >> 1))
++
++#define kNumPosSlotBits 6
++#define kNumLenToPosStates 4
++
++#define kNumAlignBits 4
++#define kAlignTableSize (1 << kNumAlignBits)
++
++#define kMatchMinLen 2
++#define kMatchSpecLenStart (kMatchMinLen + kLenNumLowSymbols + kLenNumMidSymbols + kLenNumHighSymbols)
++
++#define IsMatch 0
++#define IsRep (IsMatch + (kNumStates << kNumPosBitsMax))
++#define IsRepG0 (IsRep + kNumStates)
++#define IsRepG1 (IsRepG0 + kNumStates)
++#define IsRepG2 (IsRepG1 + kNumStates)
++#define IsRep0Long (IsRepG2 + kNumStates)
++#define PosSlot (IsRep0Long + (kNumStates << kNumPosBitsMax))
++#define SpecPos (PosSlot + (kNumLenToPosStates << kNumPosSlotBits))
++#define Align (SpecPos + kNumFullDistances - kEndPosModelIndex)
++#define LenCoder (Align + kAlignTableSize)
++#define RepLenCoder (LenCoder + kNumLenProbs)
++#define Literal (RepLenCoder + kNumLenProbs)
++
++#define LZMA_BASE_SIZE 1846
++#define LZMA_LIT_SIZE 768
++
++#define LzmaProps_GetNumProbs(p) ((UInt32)LZMA_BASE_SIZE + (LZMA_LIT_SIZE << ((p)->lc + (p)->lp)))
++
++#if Literal != LZMA_BASE_SIZE
++StopCompilingDueBUG
++#endif
++
++#define LZMA_DIC_MIN (1 << 12)
++
++/* First LZMA-symbol is always decoded.
++And it decodes new LZMA-symbols while (buf < bufLimit), but "buf" is without last normalization
++Out:
++  Result:
++    SZ_OK - OK
++    SZ_ERROR_DATA - Error
++  p->remainLen:
++    < kMatchSpecLenStart : normal remain
++    = kMatchSpecLenStart : finished
++    = kMatchSpecLenStart + 1 : Flush marker
++    = kMatchSpecLenStart + 2 : State Init Marker
++*/
++
++static int MY_FAST_CALL LzmaDec_DecodeReal(CLzmaDec *p, SizeT limit, const Byte *bufLimit)
++{
++  CLzmaProb *probs = p->probs;
++
++  unsigned state = p->state;
++  UInt32 rep0 = p->reps[0], rep1 = p->reps[1], rep2 = p->reps[2], rep3 = p->reps[3];
++  unsigned pbMask = ((unsigned)1 << (p->prop.pb)) - 1;
++  unsigned lpMask = ((unsigned)1 << (p->prop.lp)) - 1;
++  unsigned lc = p->prop.lc;
++
++  Byte *dic = p->dic;
++  SizeT dicBufSize = p->dicBufSize;
++  SizeT dicPos = p->dicPos;
++  
++  UInt32 processedPos = p->processedPos;
++  UInt32 checkDicSize = p->checkDicSize;
++  unsigned len = 0;
++
++  const Byte *buf = p->buf;
++  UInt32 range = p->range;
++  UInt32 code = p->code;
++
++  do
++  {
++    CLzmaProb *prob;
++    UInt32 bound;
++    unsigned ttt;
++    unsigned posState = processedPos & pbMask;
++
++    prob = probs + IsMatch + (state << kNumPosBitsMax) + posState;
++    IF_BIT_0(prob)
++    {
++      unsigned symbol;
++      UPDATE_0(prob);
++      prob = probs + Literal;
++      if (checkDicSize != 0 || processedPos != 0)
++        prob += (LZMA_LIT_SIZE * (((processedPos & lpMask) << lc) +
++        (dic[(dicPos == 0 ? dicBufSize : dicPos) - 1] >> (8 - lc))));
++
++      if (state < kNumLitStates)
++      {
++        state -= (state < 4) ? state : 3;
++        symbol = 1;
++        do { GET_BIT(prob + symbol, symbol) } while (symbol < 0x100);
++      }
++      else
++      {
++        unsigned matchByte = p->dic[(dicPos - rep0) + ((dicPos < rep0) ? dicBufSize : 0)];
++        unsigned offs = 0x100;
++        state -= (state < 10) ? 3 : 6;
++        symbol = 1;
++        do
++        {
++          unsigned bit;
++          CLzmaProb *probLit;
++          matchByte <<= 1;
++          bit = (matchByte & offs);
++          probLit = prob + offs + bit + symbol;
++          GET_BIT2(probLit, symbol, offs &= ~bit, offs &= bit)
++        }
++        while (symbol < 0x100);
++      }
++      dic[dicPos++] = (Byte)symbol;
++      processedPos++;
++      continue;
++    }
++    else
++    {
++      UPDATE_1(prob);
++      prob = probs + IsRep + state;
++      IF_BIT_0(prob)
++      {
++        UPDATE_0(prob);
++        state += kNumStates;
++        prob = probs + LenCoder;
++      }
++      else
++      {
++        UPDATE_1(prob);
++        if (checkDicSize == 0 && processedPos == 0)
++          return SZ_ERROR_DATA;
++        prob = probs + IsRepG0 + state;
++        IF_BIT_0(prob)
++        {
++          UPDATE_0(prob);
++          prob = probs + IsRep0Long + (state << kNumPosBitsMax) + posState;
++          IF_BIT_0(prob)
++          {
++            UPDATE_0(prob);
++            dic[dicPos] = dic[(dicPos - rep0) + ((dicPos < rep0) ? dicBufSize : 0)];
++            dicPos++;
++            processedPos++;
++            state = state < kNumLitStates ? 9 : 11;
++            continue;
++          }
++          UPDATE_1(prob);
++        }
++        else
++        {
++          UInt32 distance;
++          UPDATE_1(prob);
++          prob = probs + IsRepG1 + state;
++          IF_BIT_0(prob)
++          {
++            UPDATE_0(prob);
++            distance = rep1;
++          }
++          else
++          {
++            UPDATE_1(prob);
++            prob = probs + IsRepG2 + state;
++            IF_BIT_0(prob)
++            {
++              UPDATE_0(prob);
++              distance = rep2;
++            }
++            else
++            {
++              UPDATE_1(prob);
++              distance = rep3;
++              rep3 = rep2;
++            }
++            rep2 = rep1;
++          }
++          rep1 = rep0;
++          rep0 = distance;
++        }
++        state = state < kNumLitStates ? 8 : 11;
++        prob = probs + RepLenCoder;
++      }
++      {
++        unsigned limit, offset;
++        CLzmaProb *probLen = prob + LenChoice;
++        IF_BIT_0(probLen)
++        {
++          UPDATE_0(probLen);
++          probLen = prob + LenLow + (posState << kLenNumLowBits);
++          offset = 0;
++          limit = (1 << kLenNumLowBits);
++        }
++        else
++        {
++          UPDATE_1(probLen);
++          probLen = prob + LenChoice2;
++          IF_BIT_0(probLen)
++          {
++            UPDATE_0(probLen);
++            probLen = prob + LenMid + (posState << kLenNumMidBits);
++            offset = kLenNumLowSymbols;
++            limit = (1 << kLenNumMidBits);
++          }
++          else
++          {
++            UPDATE_1(probLen);
++            probLen = prob + LenHigh;
++            offset = kLenNumLowSymbols + kLenNumMidSymbols;
++            limit = (1 << kLenNumHighBits);
++          }
++        }
++        TREE_DECODE(probLen, limit, len);
++        len += offset;
++      }
++
++      if (state >= kNumStates)
++      {
++        UInt32 distance;
++        prob = probs + PosSlot +
++            ((len < kNumLenToPosStates ? len : kNumLenToPosStates - 1) << kNumPosSlotBits);
++        TREE_6_DECODE(prob, distance);
++        if (distance >= kStartPosModelIndex)
++        {
++          unsigned posSlot = (unsigned)distance;
++          int numDirectBits = (int)(((distance >> 1) - 1));
++          distance = (2 | (distance & 1));
++          if (posSlot < kEndPosModelIndex)
++          {
++            distance <<= numDirectBits;
++            prob = probs + SpecPos + distance - posSlot - 1;
++            {
++              UInt32 mask = 1;
++              unsigned i = 1;
++              do
++              {
++                GET_BIT2(prob + i, i, ; , distance |= mask);
++                mask <<= 1;
++              }
++              while (--numDirectBits != 0);
++            }
++          }
++          else
++          {
++            numDirectBits -= kNumAlignBits;
++            do
++            {
++              NORMALIZE
++              range >>= 1;
++              
++              {
++                UInt32 t;
++                code -= range;
++                t = (0 - ((UInt32)code >> 31)); /* (UInt32)((Int32)code >> 31) */
++                distance = (distance << 1) + (t + 1);
++                code += range & t;
++              }
++              /*
++              distance <<= 1;
++              if (code >= range)
++              {
++                code -= range;
++                distance |= 1;
++              }
++              */
++            }
++            while (--numDirectBits != 0);
++            prob = probs + Align;
++            distance <<= kNumAlignBits;
++            {
++              unsigned i = 1;
++              GET_BIT2(prob + i, i, ; , distance |= 1);
++              GET_BIT2(prob + i, i, ; , distance |= 2);
++              GET_BIT2(prob + i, i, ; , distance |= 4);
++              GET_BIT2(prob + i, i, ; , distance |= 8);
++            }
++            if (distance == (UInt32)0xFFFFFFFF)
++            {
++              len += kMatchSpecLenStart;
++              state -= kNumStates;
++              break;
++            }
++          }
++        }
++        rep3 = rep2;
++        rep2 = rep1;
++        rep1 = rep0;
++        rep0 = distance + 1;
++        if (checkDicSize == 0)
++        {
++          if (distance >= processedPos)
++            return SZ_ERROR_DATA;
++        }
++        else if (distance >= checkDicSize)
++          return SZ_ERROR_DATA;
++        state = (state < kNumStates + kNumLitStates) ? kNumLitStates : kNumLitStates + 3;
++      }
++
++      len += kMatchMinLen;
++
++      if (limit == dicPos)
++        return SZ_ERROR_DATA;
++      {
++        SizeT rem = limit - dicPos;
++        unsigned curLen = ((rem < len) ? (unsigned)rem : len);
++        SizeT pos = (dicPos - rep0) + ((dicPos < rep0) ? dicBufSize : 0);
++
++        processedPos += curLen;
++
++        len -= curLen;
++        if (pos + curLen <= dicBufSize)
++        {
++          Byte *dest = dic + dicPos;
++          ptrdiff_t src = (ptrdiff_t)pos - (ptrdiff_t)dicPos;
++          const Byte *lim = dest + curLen;
++          dicPos += curLen;
++          do
++            *(dest) = (Byte)*(dest + src);
++          while (++dest != lim);
++        }
++        else
++        {
++          do
++          {
++            dic[dicPos++] = dic[pos];
++            if (++pos == dicBufSize)
++              pos = 0;
++          }
++          while (--curLen != 0);
++        }
++      }
++    }
++  }
++  while (dicPos < limit && buf < bufLimit);
++  NORMALIZE;
++  p->buf = buf;
++  p->range = range;
++  p->code = code;
++  p->remainLen = len;
++  p->dicPos = dicPos;
++  p->processedPos = processedPos;
++  p->reps[0] = rep0;
++  p->reps[1] = rep1;
++  p->reps[2] = rep2;
++  p->reps[3] = rep3;
++  p->state = state;
++
++  return SZ_OK;
++}
++
++static void MY_FAST_CALL LzmaDec_WriteRem(CLzmaDec *p, SizeT limit)
++{
++  if (p->remainLen != 0 && p->remainLen < kMatchSpecLenStart)
++  {
++    Byte *dic = p->dic;
++    SizeT dicPos = p->dicPos;
++    SizeT dicBufSize = p->dicBufSize;
++    unsigned len = p->remainLen;
++    UInt32 rep0 = p->reps[0];
++    if (limit - dicPos < len)
++      len = (unsigned)(limit - dicPos);
++
++    if (p->checkDicSize == 0 && p->prop.dicSize - p->processedPos <= len)
++      p->checkDicSize = p->prop.dicSize;
++
++    p->processedPos += len;
++    p->remainLen -= len;
++    while (len-- != 0)
++    {
++      dic[dicPos] = dic[(dicPos - rep0) + ((dicPos < rep0) ? dicBufSize : 0)];
++      dicPos++;
++    }
++    p->dicPos = dicPos;
++  }
++}
++
++static int MY_FAST_CALL LzmaDec_DecodeReal2(CLzmaDec *p, SizeT limit, const Byte *bufLimit)
++{
++  do
++  {
++    SizeT limit2 = limit;
++    if (p->checkDicSize == 0)
++    {
++      UInt32 rem = p->prop.dicSize - p->processedPos;
++      if (limit - p->dicPos > rem)
++        limit2 = p->dicPos + rem;
++    }
++    RINOK(LzmaDec_DecodeReal(p, limit2, bufLimit));
++    if (p->processedPos >= p->prop.dicSize)
++      p->checkDicSize = p->prop.dicSize;
++    LzmaDec_WriteRem(p, limit);
++  }
++  while (p->dicPos < limit && p->buf < bufLimit && p->remainLen < kMatchSpecLenStart);
++
++  if (p->remainLen > kMatchSpecLenStart)
++  {
++    p->remainLen = kMatchSpecLenStart;
++  }
++  return 0;
++}
++
++typedef enum
++{
++  DUMMY_ERROR, /* unexpected end of input stream */
++  DUMMY_LIT,
++  DUMMY_MATCH,
++  DUMMY_REP
++} ELzmaDummy;
++
++static ELzmaDummy LzmaDec_TryDummy(const CLzmaDec *p, const Byte *buf, SizeT inSize)
++{
++  UInt32 range = p->range;
++  UInt32 code = p->code;
++  const Byte *bufLimit = buf + inSize;
++  CLzmaProb *probs = p->probs;
++  unsigned state = p->state;
++  ELzmaDummy res;
++
++  {
++    CLzmaProb *prob;
++    UInt32 bound;
++    unsigned ttt;
++    unsigned posState = (p->processedPos) & ((1 << p->prop.pb) - 1);
++
++    prob = probs + IsMatch + (state << kNumPosBitsMax) + posState;
++    IF_BIT_0_CHECK(prob)
++    {
++      UPDATE_0_CHECK
++
++      /* if (bufLimit - buf >= 7) return DUMMY_LIT; */
++
++      prob = probs + Literal;
++      if (p->checkDicSize != 0 || p->processedPos != 0)
++        prob += (LZMA_LIT_SIZE *
++          ((((p->processedPos) & ((1 << (p->prop.lp)) - 1)) << p->prop.lc) +
++          (p->dic[(p->dicPos == 0 ? p->dicBufSize : p->dicPos) - 1] >> (8 - p->prop.lc))));
++
++      if (state < kNumLitStates)
++      {
++        unsigned symbol = 1;
++        do { GET_BIT_CHECK(prob + symbol, symbol) } while (symbol < 0x100);
++      }
++      else
++      {
++        unsigned matchByte = p->dic[p->dicPos - p->reps[0] +
++            ((p->dicPos < p->reps[0]) ? p->dicBufSize : 0)];
++        unsigned offs = 0x100;
++        unsigned symbol = 1;
++        do
++        {
++          unsigned bit;
++          CLzmaProb *probLit;
++          matchByte <<= 1;
++          bit = (matchByte & offs);
++          probLit = prob + offs + bit + symbol;
++          GET_BIT2_CHECK(probLit, symbol, offs &= ~bit, offs &= bit)
++        }
++        while (symbol < 0x100);
++      }
++      res = DUMMY_LIT;
++    }
++    else
++    {
++      unsigned len;
++      UPDATE_1_CHECK;
++
++      prob = probs + IsRep + state;
++      IF_BIT_0_CHECK(prob)
++      {
++        UPDATE_0_CHECK;
++        state = 0;
++        prob = probs + LenCoder;
++        res = DUMMY_MATCH;
++      }
++      else
++      {
++        UPDATE_1_CHECK;
++        res = DUMMY_REP;
++        prob = probs + IsRepG0 + state;
++        IF_BIT_0_CHECK(prob)
++        {
++          UPDATE_0_CHECK;
++          prob = probs + IsRep0Long + (state << kNumPosBitsMax) + posState;
++          IF_BIT_0_CHECK(prob)
++          {
++            UPDATE_0_CHECK;
++            NORMALIZE_CHECK;
++            return DUMMY_REP;
++          }
++          else
++          {
++            UPDATE_1_CHECK;
++          }
++        }
++        else
++        {
++          UPDATE_1_CHECK;
++          prob = probs + IsRepG1 + state;
++          IF_BIT_0_CHECK(prob)
++          {
++            UPDATE_0_CHECK;
++          }
++          else
++          {
++            UPDATE_1_CHECK;
++            prob = probs + IsRepG2 + state;
++            IF_BIT_0_CHECK(prob)
++            {
++              UPDATE_0_CHECK;
++            }
++            else
++            {
++              UPDATE_1_CHECK;
++            }
++          }
++        }
++        state = kNumStates;
++        prob = probs + RepLenCoder;
++      }
++      {
++        unsigned limit, offset;
++        CLzmaProb *probLen = prob + LenChoice;
++        IF_BIT_0_CHECK(probLen)
++        {
++          UPDATE_0_CHECK;
++          probLen = prob + LenLow + (posState << kLenNumLowBits);
++          offset = 0;
++          limit = 1 << kLenNumLowBits;
++        }
++        else
++        {
++          UPDATE_1_CHECK;
++          probLen = prob + LenChoice2;
++          IF_BIT_0_CHECK(probLen)
++          {
++            UPDATE_0_CHECK;
++            probLen = prob + LenMid + (posState << kLenNumMidBits);
++            offset = kLenNumLowSymbols;
++            limit = 1 << kLenNumMidBits;
++          }
++          else
++          {
++            UPDATE_1_CHECK;
++            probLen = prob + LenHigh;
++            offset = kLenNumLowSymbols + kLenNumMidSymbols;
++            limit = 1 << kLenNumHighBits;
++          }
++        }
++        TREE_DECODE_CHECK(probLen, limit, len);
++        len += offset;
++      }
++
++      if (state < 4)
++      {
++        unsigned posSlot;
++        prob = probs + PosSlot +
++            ((len < kNumLenToPosStates ? len : kNumLenToPosStates - 1) <<
++            kNumPosSlotBits);
++        TREE_DECODE_CHECK(prob, 1 << kNumPosSlotBits, posSlot);
++        if (posSlot >= kStartPosModelIndex)
++        {
++          int numDirectBits = ((posSlot >> 1) - 1);
++
++          /* if (bufLimit - buf >= 8) return DUMMY_MATCH; */
++
++          if (posSlot < kEndPosModelIndex)
++          {
++            prob = probs + SpecPos + ((2 | (posSlot & 1)) << numDirectBits) - posSlot - 1;
++          }
++          else
++          {
++            numDirectBits -= kNumAlignBits;
++            do
++            {
++              NORMALIZE_CHECK
++              range >>= 1;
++              code -= range & (((code - range) >> 31) - 1);
++              /* if (code >= range) code -= range; */
++            }
++            while (--numDirectBits != 0);
++            prob = probs + Align;
++            numDirectBits = kNumAlignBits;
++          }
++          {
++            unsigned i = 1;
++            do
++            {
++              GET_BIT_CHECK(prob + i, i);
++            }
++            while (--numDirectBits != 0);
++          }
++        }
++      }
++    }
++  }
++  NORMALIZE_CHECK;
++  return res;
++}
++
++
++static void LzmaDec_InitRc(CLzmaDec *p, const Byte *data)
++{
++  p->code = ((UInt32)data[1] << 24) | ((UInt32)data[2] << 16) | ((UInt32)data[3] << 8) | ((UInt32)data[4]);
++  p->range = 0xFFFFFFFF;
++  p->needFlush = 0;
++}
++
++void LzmaDec_InitDicAndState(CLzmaDec *p, Bool initDic, Bool initState)
++{
++  p->needFlush = 1;
++  p->remainLen = 0;
++  p->tempBufSize = 0;
++
++  if (initDic)
++  {
++    p->processedPos = 0;
++    p->checkDicSize = 0;
++    p->needInitState = 1;
++  }
++  if (initState)
++    p->needInitState = 1;
++}
++
++void LzmaDec_Init(CLzmaDec *p)
++{
++  p->dicPos = 0;
++  LzmaDec_InitDicAndState(p, True, True);
++}
++
++static void LzmaDec_InitStateReal(CLzmaDec *p)
++{
++  UInt32 numProbs = Literal + ((UInt32)LZMA_LIT_SIZE << (p->prop.lc + p->prop.lp));
++  UInt32 i;
++  CLzmaProb *probs = p->probs;
++  for (i = 0; i < numProbs; i++)
++    probs[i] = kBitModelTotal >> 1;
++  p->reps[0] = p->reps[1] = p->reps[2] = p->reps[3] = 1;
++  p->state = 0;
++  p->needInitState = 0;
++}
++
++SRes LzmaDec_DecodeToDic(CLzmaDec *p, SizeT dicLimit, const Byte *src, SizeT *srcLen,
++    ELzmaFinishMode finishMode, ELzmaStatus *status)
++{
++  SizeT inSize = *srcLen;
++  (*srcLen) = 0;
++  LzmaDec_WriteRem(p, dicLimit);
++  
++  *status = LZMA_STATUS_NOT_SPECIFIED;
++
++  while (p->remainLen != kMatchSpecLenStart)
++  {
++      int checkEndMarkNow;
++
++      if (p->needFlush != 0)
++      {
++        for (; inSize > 0 && p->tempBufSize < RC_INIT_SIZE; (*srcLen)++, inSize--)
++          p->tempBuf[p->tempBufSize++] = *src++;
++        if (p->tempBufSize < RC_INIT_SIZE)
++        {
++          *status = LZMA_STATUS_NEEDS_MORE_INPUT;
++          return SZ_OK;
++        }
++        if (p->tempBuf[0] != 0)
++          return SZ_ERROR_DATA;
++
++        LzmaDec_InitRc(p, p->tempBuf);
++        p->tempBufSize = 0;
++      }
++
++      checkEndMarkNow = 0;
++      if (p->dicPos >= dicLimit)
++      {
++        if (p->remainLen == 0 && p->code == 0)
++        {
++          *status = LZMA_STATUS_MAYBE_FINISHED_WITHOUT_MARK;
++          return SZ_OK;
++        }
++        if (finishMode == LZMA_FINISH_ANY)
++        {
++          *status = LZMA_STATUS_NOT_FINISHED;
++          return SZ_OK;
++        }
++        if (p->remainLen != 0)
++        {
++          *status = LZMA_STATUS_NOT_FINISHED;
++          return SZ_ERROR_DATA;
++        }
++        checkEndMarkNow = 1;
++      }
++
++      if (p->needInitState)
++        LzmaDec_InitStateReal(p);
++  
++      if (p->tempBufSize == 0)
++      {
++        SizeT processed;
++        const Byte *bufLimit;
++        if (inSize < LZMA_REQUIRED_INPUT_MAX || checkEndMarkNow)
++        {
++          int dummyRes = LzmaDec_TryDummy(p, src, inSize);
++          if (dummyRes == DUMMY_ERROR)
++          {
++            memcpy(p->tempBuf, src, inSize);
++            p->tempBufSize = (unsigned)inSize;
++            (*srcLen) += inSize;
++            *status = LZMA_STATUS_NEEDS_MORE_INPUT;
++            return SZ_OK;
++          }
++          if (checkEndMarkNow && dummyRes != DUMMY_MATCH)
++          {
++            *status = LZMA_STATUS_NOT_FINISHED;
++            return SZ_ERROR_DATA;
++          }
++          bufLimit = src;
++        }
++        else
++          bufLimit = src + inSize - LZMA_REQUIRED_INPUT_MAX;
++        p->buf = src;
++        if (LzmaDec_DecodeReal2(p, dicLimit, bufLimit) != 0)
++          return SZ_ERROR_DATA;
++        processed = (SizeT)(p->buf - src);
++        (*srcLen) += processed;
++        src += processed;
++        inSize -= processed;
++      }
++      else
++      {
++        unsigned rem = p->tempBufSize, lookAhead = 0;
++        while (rem < LZMA_REQUIRED_INPUT_MAX && lookAhead < inSize)
++          p->tempBuf[rem++] = src[lookAhead++];
++        p->tempBufSize = rem;
++        if (rem < LZMA_REQUIRED_INPUT_MAX || checkEndMarkNow)
++        {
++          int dummyRes = LzmaDec_TryDummy(p, p->tempBuf, rem);
++          if (dummyRes == DUMMY_ERROR)
++          {
++            (*srcLen) += lookAhead;
++            *status = LZMA_STATUS_NEEDS_MORE_INPUT;
++            return SZ_OK;
++          }
++          if (checkEndMarkNow && dummyRes != DUMMY_MATCH)
++          {
++            *status = LZMA_STATUS_NOT_FINISHED;
++            return SZ_ERROR_DATA;
++          }
++        }
++        p->buf = p->tempBuf;
++        if (LzmaDec_DecodeReal2(p, dicLimit, p->buf) != 0)
++          return SZ_ERROR_DATA;
++        lookAhead -= (rem - (unsigned)(p->buf - p->tempBuf));
++        (*srcLen) += lookAhead;
++        src += lookAhead;
++        inSize -= lookAhead;
++        p->tempBufSize = 0;
++      }
++  }
++  if (p->code == 0)
++    *status = LZMA_STATUS_FINISHED_WITH_MARK;
++  return (p->code == 0) ? SZ_OK : SZ_ERROR_DATA;
++}
++
++SRes LzmaDec_DecodeToBuf(CLzmaDec *p, Byte *dest, SizeT *destLen, const Byte *src, SizeT *srcLen, ELzmaFinishMode finishMode, ELzmaStatus *status)
++{
++  SizeT outSize = *destLen;
++  SizeT inSize = *srcLen;
++  *srcLen = *destLen = 0;
++  for (;;)
++  {
++    SizeT inSizeCur = inSize, outSizeCur, dicPos;
++    ELzmaFinishMode curFinishMode;
++    SRes res;
++    if (p->dicPos == p->dicBufSize)
++      p->dicPos = 0;
++    dicPos = p->dicPos;
++    if (outSize > p->dicBufSize - dicPos)
++    {
++      outSizeCur = p->dicBufSize;
++      curFinishMode = LZMA_FINISH_ANY;
++    }
++    else
++    {
++      outSizeCur = dicPos + outSize;
++      curFinishMode = finishMode;
++    }
++
++    res = LzmaDec_DecodeToDic(p, outSizeCur, src, &inSizeCur, curFinishMode, status);
++    src += inSizeCur;
++    inSize -= inSizeCur;
++    *srcLen += inSizeCur;
++    outSizeCur = p->dicPos - dicPos;
++    memcpy(dest, p->dic + dicPos, outSizeCur);
++    dest += outSizeCur;
++    outSize -= outSizeCur;
++    *destLen += outSizeCur;
++    if (res != 0)
++      return res;
++    if (outSizeCur == 0 || outSize == 0)
++      return SZ_OK;
++  }
++}
++
++void LzmaDec_FreeProbs(CLzmaDec *p, ISzAlloc *alloc)
++{
++  alloc->Free(alloc, p->probs);
++  p->probs = 0;
++}
++
++static void LzmaDec_FreeDict(CLzmaDec *p, ISzAlloc *alloc)
++{
++  alloc->Free(alloc, p->dic);
++  p->dic = 0;
++}
++
++void LzmaDec_Free(CLzmaDec *p, ISzAlloc *alloc)
++{
++  LzmaDec_FreeProbs(p, alloc);
++  LzmaDec_FreeDict(p, alloc);
++}
++
++SRes LzmaProps_Decode(CLzmaProps *p, const Byte *data, unsigned size)
++{
++  UInt32 dicSize;
++  Byte d;
++  
++  if (size < LZMA_PROPS_SIZE)
++    return SZ_ERROR_UNSUPPORTED;
++  else
++    dicSize = data[1] | ((UInt32)data[2] << 8) | ((UInt32)data[3] << 16) | ((UInt32)data[4] << 24);
++ 
++  if (dicSize < LZMA_DIC_MIN)
++    dicSize = LZMA_DIC_MIN;
++  p->dicSize = dicSize;
++
++  d = data[0];
++  if (d >= (9 * 5 * 5))
++    return SZ_ERROR_UNSUPPORTED;
++
++  p->lc = d % 9;
++  d /= 9;
++  p->pb = d / 5;
++  p->lp = d % 5;
++
++  return SZ_OK;
++}
++
++static SRes LzmaDec_AllocateProbs2(CLzmaDec *p, const CLzmaProps *propNew, ISzAlloc *alloc)
++{
++  UInt32 numProbs = LzmaProps_GetNumProbs(propNew);
++  if (p->probs == 0 || numProbs != p->numProbs)
++  {
++    LzmaDec_FreeProbs(p, alloc);
++    p->probs = (CLzmaProb *)alloc->Alloc(alloc, numProbs * sizeof(CLzmaProb));
++    p->numProbs = numProbs;
++    if (p->probs == 0)
++      return SZ_ERROR_MEM;
++  }
++  return SZ_OK;
++}
++
++SRes LzmaDec_AllocateProbs(CLzmaDec *p, const Byte *props, unsigned propsSize, ISzAlloc *alloc)
++{
++  CLzmaProps propNew;
++  RINOK(LzmaProps_Decode(&propNew, props, propsSize));
++  RINOK(LzmaDec_AllocateProbs2(p, &propNew, alloc));
++  p->prop = propNew;
++  return SZ_OK;
++}
++
++SRes LzmaDec_Allocate(CLzmaDec *p, const Byte *props, unsigned propsSize, ISzAlloc *alloc)
++{
++  CLzmaProps propNew;
++  SizeT dicBufSize;
++  RINOK(LzmaProps_Decode(&propNew, props, propsSize));
++  RINOK(LzmaDec_AllocateProbs2(p, &propNew, alloc));
++  dicBufSize = propNew.dicSize;
++  if (p->dic == 0 || dicBufSize != p->dicBufSize)
++  {
++    LzmaDec_FreeDict(p, alloc);
++    p->dic = (Byte *)alloc->Alloc(alloc, dicBufSize);
++    if (p->dic == 0)
++    {
++      LzmaDec_FreeProbs(p, alloc);
++      return SZ_ERROR_MEM;
++    }
++  }
++  p->dicBufSize = dicBufSize;
++  p->prop = propNew;
++  return SZ_OK;
++}
++
++SRes LzmaDecode(Byte *dest, SizeT *destLen, const Byte *src, SizeT *srcLen,
++    const Byte *propData, unsigned propSize, ELzmaFinishMode finishMode,
++    ELzmaStatus *status, ISzAlloc *alloc)
++{
++  CLzmaDec p;
++  SRes res;
++  SizeT inSize = *srcLen;
++  SizeT outSize = *destLen;
++  *srcLen = *destLen = 0;
++  if (inSize < RC_INIT_SIZE)
++    return SZ_ERROR_INPUT_EOF;
++
++  LzmaDec_Construct(&p);
++  res = LzmaDec_AllocateProbs(&p, propData, propSize, alloc);
++  if (res != 0)
++    return res;
++  p.dic = dest;
++  p.dicBufSize = outSize;
++
++  LzmaDec_Init(&p);
++  
++  *srcLen = inSize;
++  res = LzmaDec_DecodeToDic(&p, outSize, src, srcLen, finishMode, status);
++
++  if (res == SZ_OK && *status == LZMA_STATUS_NEEDS_MORE_INPUT)
++    res = SZ_ERROR_INPUT_EOF;
++
++  (*destLen) = p.dicPos;
++  LzmaDec_FreeProbs(&p, alloc);
++  return res;
++}
+--- /dev/null
++++ b/lib/lzma/LzmaEnc.c
+@@ -0,0 +1,2271 @@
++/* LzmaEnc.c -- LZMA Encoder
++2009-11-24 : Igor Pavlov : Public domain */
++
++#include <string.h>
++
++/* #define SHOW_STAT */
++/* #define SHOW_STAT2 */
++
++#if defined(SHOW_STAT) || defined(SHOW_STAT2)
++#include <stdio.h>
++#endif
++
++#include "LzmaEnc.h"
++
++/* disable MT */
++#define _7ZIP_ST
++
++#include "LzFind.h"
++#ifndef _7ZIP_ST
++#include "LzFindMt.h"
++#endif
++
++#ifdef SHOW_STAT
++static int ttt = 0;
++#endif
++
++#define kBlockSizeMax ((1 << LZMA_NUM_BLOCK_SIZE_BITS) - 1)
++
++#define kBlockSize (9 << 10)
++#define kUnpackBlockSize (1 << 18)
++#define kMatchArraySize (1 << 21)
++#define kMatchRecordMaxSize ((LZMA_MATCH_LEN_MAX * 2 + 3) * LZMA_MATCH_LEN_MAX)
++
++#define kNumMaxDirectBits (31)
++
++#define kNumTopBits 24
++#define kTopValue ((UInt32)1 << kNumTopBits)
++
++#define kNumBitModelTotalBits 11
++#define kBitModelTotal (1 << kNumBitModelTotalBits)
++#define kNumMoveBits 5
++#define kProbInitValue (kBitModelTotal >> 1)
++
++#define kNumMoveReducingBits 4
++#define kNumBitPriceShiftBits 4
++#define kBitPrice (1 << kNumBitPriceShiftBits)
++
++void LzmaEncProps_Init(CLzmaEncProps *p)
++{
++  p->level = 5;
++  p->dictSize = p->mc = 0;
++  p->lc = p->lp = p->pb = p->algo = p->fb = p->btMode = p->numHashBytes = p->numThreads = -1;
++  p->writeEndMark = 0;
++}
++
++void LzmaEncProps_Normalize(CLzmaEncProps *p)
++{
++  int level = p->level;
++  if (level < 0) level = 5;
++  p->level = level;
++  if (p->dictSize == 0) p->dictSize = (level <= 5 ? (1 << (level * 2 + 14)) : (level == 6 ? (1 << 25) : (1 << 26)));
++  if (p->lc < 0) p->lc = 3;
++  if (p->lp < 0) p->lp = 0;
++  if (p->pb < 0) p->pb = 2;
++  if (p->algo < 0) p->algo = (level < 5 ? 0 : 1);
++  if (p->fb < 0) p->fb = (level < 7 ? 32 : 64);
++  if (p->btMode < 0) p->btMode = (p->algo == 0 ? 0 : 1);
++  if (p->numHashBytes < 0) p->numHashBytes = 4;
++  if (p->mc == 0)  p->mc = (16 + (p->fb >> 1)) >> (p->btMode ? 0 : 1);
++  if (p->numThreads < 0)
++    p->numThreads =
++      #ifndef _7ZIP_ST
++      ((p->btMode && p->algo) ? 2 : 1);
++      #else
++      1;
++      #endif
++}
++
++UInt32 LzmaEncProps_GetDictSize(const CLzmaEncProps *props2)
++{
++  CLzmaEncProps props = *props2;
++  LzmaEncProps_Normalize(&props);
++  return props.dictSize;
++}
++
++/* #define LZMA_LOG_BSR */
++/* Define it for Intel's CPU */
++
++
++#ifdef LZMA_LOG_BSR
++
++#define kDicLogSizeMaxCompress 30
++
++#define BSR2_RET(pos, res) { unsigned long i; _BitScanReverse(&i, (pos)); res = (i + i) + ((pos >> (i - 1)) & 1); }
++
++UInt32 GetPosSlot1(UInt32 pos)
++{
++  UInt32 res;
++  BSR2_RET(pos, res);
++  return res;
++}
++#define GetPosSlot2(pos, res) { BSR2_RET(pos, res); }
++#define GetPosSlot(pos, res) { if (pos < 2) res = pos; else BSR2_RET(pos, res); }
++
++#else
++
++#define kNumLogBits (9 + (int)sizeof(size_t) / 2)
++#define kDicLogSizeMaxCompress ((kNumLogBits - 1) * 2 + 7)
++
++void LzmaEnc_FastPosInit(Byte *g_FastPos)
++{
++  int c = 2, slotFast;
++  g_FastPos[0] = 0;
++  g_FastPos[1] = 1;
++  
++  for (slotFast = 2; slotFast < kNumLogBits * 2; slotFast++)
++  {
++    UInt32 k = (1 << ((slotFast >> 1) - 1));
++    UInt32 j;
++    for (j = 0; j < k; j++, c++)
++      g_FastPos[c] = (Byte)slotFast;
++  }
++}
++
++#define BSR2_RET(pos, res) { UInt32 i = 6 + ((kNumLogBits - 1) & \
++  (0 - (((((UInt32)1 << (kNumLogBits + 6)) - 1) - pos) >> 31))); \
++  res = p->g_FastPos[pos >> i] + (i * 2); }
++/*
++#define BSR2_RET(pos, res) { res = (pos < (1 << (kNumLogBits + 6))) ? \
++  p->g_FastPos[pos >> 6] + 12 : \
++  p->g_FastPos[pos >> (6 + kNumLogBits - 1)] + (6 + (kNumLogBits - 1)) * 2; }
++*/
++
++#define GetPosSlot1(pos) p->g_FastPos[pos]
++#define GetPosSlot2(pos, res) { BSR2_RET(pos, res); }
++#define GetPosSlot(pos, res) { if (pos < kNumFullDistances) res = p->g_FastPos[pos]; else BSR2_RET(pos, res); }
++
++#endif
++
++
++#define LZMA_NUM_REPS 4
++
++typedef unsigned CState;
++
++typedef struct
++{
++  UInt32 price;
++
++  CState state;
++  int prev1IsChar;
++  int prev2;
++
++  UInt32 posPrev2;
++  UInt32 backPrev2;
++
++  UInt32 posPrev;
++  UInt32 backPrev;
++  UInt32 backs[LZMA_NUM_REPS];
++} COptimal;
++
++#define kNumOpts (1 << 12)
++
++#define kNumLenToPosStates 4
++#define kNumPosSlotBits 6
++#define kDicLogSizeMin 0
++#define kDicLogSizeMax 32
++#define kDistTableSizeMax (kDicLogSizeMax * 2)
++
++
++#define kNumAlignBits 4
++#define kAlignTableSize (1 << kNumAlignBits)
++#define kAlignMask (kAlignTableSize - 1)
++
++#define kStartPosModelIndex 4
++#define kEndPosModelIndex 14
++#define kNumPosModels (kEndPosModelIndex - kStartPosModelIndex)
++
++#define kNumFullDistances (1 << (kEndPosModelIndex >> 1))
++
++#ifdef _LZMA_PROB32
++#define CLzmaProb UInt32
++#else
++#define CLzmaProb UInt16
++#endif
++
++#define LZMA_PB_MAX 4
++#define LZMA_LC_MAX 8
++#define LZMA_LP_MAX 4
++
++#define LZMA_NUM_PB_STATES_MAX (1 << LZMA_PB_MAX)
++
++
++#define kLenNumLowBits 3
++#define kLenNumLowSymbols (1 << kLenNumLowBits)
++#define kLenNumMidBits 3
++#define kLenNumMidSymbols (1 << kLenNumMidBits)
++#define kLenNumHighBits 8
++#define kLenNumHighSymbols (1 << kLenNumHighBits)
++
++#define kLenNumSymbolsTotal (kLenNumLowSymbols + kLenNumMidSymbols + kLenNumHighSymbols)
++
++#define LZMA_MATCH_LEN_MIN 2
++#define LZMA_MATCH_LEN_MAX (LZMA_MATCH_LEN_MIN + kLenNumSymbolsTotal - 1)
++
++#define kNumStates 12
++
++typedef struct
++{
++  CLzmaProb choice;
++  CLzmaProb choice2;
++  CLzmaProb low[LZMA_NUM_PB_STATES_MAX << kLenNumLowBits];
++  CLzmaProb mid[LZMA_NUM_PB_STATES_MAX << kLenNumMidBits];
++  CLzmaProb high[kLenNumHighSymbols];
++} CLenEnc;
++
++typedef struct
++{
++  CLenEnc p;
++  UInt32 prices[LZMA_NUM_PB_STATES_MAX][kLenNumSymbolsTotal];
++  UInt32 tableSize;
++  UInt32 counters[LZMA_NUM_PB_STATES_MAX];
++} CLenPriceEnc;
++
++typedef struct
++{
++  UInt32 range;
++  Byte cache;
++  UInt64 low;
++  UInt64 cacheSize;
++  Byte *buf;
++  Byte *bufLim;
++  Byte *bufBase;
++  ISeqOutStream *outStream;
++  UInt64 processed;
++  SRes res;
++} CRangeEnc;
++
++typedef struct
++{
++  CLzmaProb *litProbs;
++
++  CLzmaProb isMatch[kNumStates][LZMA_NUM_PB_STATES_MAX];
++  CLzmaProb isRep[kNumStates];
++  CLzmaProb isRepG0[kNumStates];
++  CLzmaProb isRepG1[kNumStates];
++  CLzmaProb isRepG2[kNumStates];
++  CLzmaProb isRep0Long[kNumStates][LZMA_NUM_PB_STATES_MAX];
++
++  CLzmaProb posSlotEncoder[kNumLenToPosStates][1 << kNumPosSlotBits];
++  CLzmaProb posEncoders[kNumFullDistances - kEndPosModelIndex];
++  CLzmaProb posAlignEncoder[1 << kNumAlignBits];
++  
++  CLenPriceEnc lenEnc;
++  CLenPriceEnc repLenEnc;
++
++  UInt32 reps[LZMA_NUM_REPS];
++  UInt32 state;
++} CSaveState;
++
++typedef struct
++{
++  IMatchFinder matchFinder;
++  void *matchFinderObj;
++
++  #ifndef _7ZIP_ST
++  Bool mtMode;
++  CMatchFinderMt matchFinderMt;
++  #endif
++
++  CMatchFinder matchFinderBase;
++
++  #ifndef _7ZIP_ST
++  Byte pad[128];
++  #endif
++  
++  UInt32 optimumEndIndex;
++  UInt32 optimumCurrentIndex;
++
++  UInt32 longestMatchLength;
++  UInt32 numPairs;
++  UInt32 numAvail;
++  COptimal opt[kNumOpts];
++  
++  #ifndef LZMA_LOG_BSR
++  Byte g_FastPos[1 << kNumLogBits];
++  #endif
++
++  UInt32 ProbPrices[kBitModelTotal >> kNumMoveReducingBits];
++  UInt32 matches[LZMA_MATCH_LEN_MAX * 2 + 2 + 1];
++  UInt32 numFastBytes;
++  UInt32 additionalOffset;
++  UInt32 reps[LZMA_NUM_REPS];
++  UInt32 state;
++
++  UInt32 posSlotPrices[kNumLenToPosStates][kDistTableSizeMax];
++  UInt32 distancesPrices[kNumLenToPosStates][kNumFullDistances];
++  UInt32 alignPrices[kAlignTableSize];
++  UInt32 alignPriceCount;
++
++  UInt32 distTableSize;
++
++  unsigned lc, lp, pb;
++  unsigned lpMask, pbMask;
++
++  CLzmaProb *litProbs;
++
++  CLzmaProb isMatch[kNumStates][LZMA_NUM_PB_STATES_MAX];
++  CLzmaProb isRep[kNumStates];
++  CLzmaProb isRepG0[kNumStates];
++  CLzmaProb isRepG1[kNumStates];
++  CLzmaProb isRepG2[kNumStates];
++  CLzmaProb isRep0Long[kNumStates][LZMA_NUM_PB_STATES_MAX];
++
++  CLzmaProb posSlotEncoder[kNumLenToPosStates][1 << kNumPosSlotBits];
++  CLzmaProb posEncoders[kNumFullDistances - kEndPosModelIndex];
++  CLzmaProb posAlignEncoder[1 << kNumAlignBits];
++  
++  CLenPriceEnc lenEnc;
++  CLenPriceEnc repLenEnc;
++
++  unsigned lclp;
++
++  Bool fastMode;
++  
++  CRangeEnc rc;
++
++  Bool writeEndMark;
++  UInt64 nowPos64;
++  UInt32 matchPriceCount;
++  Bool finished;
++  Bool multiThread;
++
++  SRes result;
++  UInt32 dictSize;
++  UInt32 matchFinderCycles;
++
++  int needInit;
++
++  CSaveState saveState;
++} CLzmaEnc;
++
++void LzmaEnc_SaveState(CLzmaEncHandle pp)
++{
++  CLzmaEnc *p = (CLzmaEnc *)pp;
++  CSaveState *dest = &p->saveState;
++  int i;
++  dest->lenEnc = p->lenEnc;
++  dest->repLenEnc = p->repLenEnc;
++  dest->state = p->state;
++
++  for (i = 0; i < kNumStates; i++)
++  {
++    memcpy(dest->isMatch[i], p->isMatch[i], sizeof(p->isMatch[i]));
++    memcpy(dest->isRep0Long[i], p->isRep0Long[i], sizeof(p->isRep0Long[i]));
++  }
++  for (i = 0; i < kNumLenToPosStates; i++)
++    memcpy(dest->posSlotEncoder[i], p->posSlotEncoder[i], sizeof(p->posSlotEncoder[i]));
++  memcpy(dest->isRep, p->isRep, sizeof(p->isRep));
++  memcpy(dest->isRepG0, p->isRepG0, sizeof(p->isRepG0));
++  memcpy(dest->isRepG1, p->isRepG1, sizeof(p->isRepG1));
++  memcpy(dest->isRepG2, p->isRepG2, sizeof(p->isRepG2));
++  memcpy(dest->posEncoders, p->posEncoders, sizeof(p->posEncoders));
++  memcpy(dest->posAlignEncoder, p->posAlignEncoder, sizeof(p->posAlignEncoder));
++  memcpy(dest->reps, p->reps, sizeof(p->reps));
++  memcpy(dest->litProbs, p->litProbs, (0x300 << p->lclp) * sizeof(CLzmaProb));
++}
++
++void LzmaEnc_RestoreState(CLzmaEncHandle pp)
++{
++  CLzmaEnc *dest = (CLzmaEnc *)pp;
++  const CSaveState *p = &dest->saveState;
++  int i;
++  dest->lenEnc = p->lenEnc;
++  dest->repLenEnc = p->repLenEnc;
++  dest->state = p->state;
++
++  for (i = 0; i < kNumStates; i++)
++  {
++    memcpy(dest->isMatch[i], p->isMatch[i], sizeof(p->isMatch[i]));
++    memcpy(dest->isRep0Long[i], p->isRep0Long[i], sizeof(p->isRep0Long[i]));
++  }
++  for (i = 0; i < kNumLenToPosStates; i++)
++    memcpy(dest->posSlotEncoder[i], p->posSlotEncoder[i], sizeof(p->posSlotEncoder[i]));
++  memcpy(dest->isRep, p->isRep, sizeof(p->isRep));
++  memcpy(dest->isRepG0, p->isRepG0, sizeof(p->isRepG0));
++  memcpy(dest->isRepG1, p->isRepG1, sizeof(p->isRepG1));
++  memcpy(dest->isRepG2, p->isRepG2, sizeof(p->isRepG2));
++  memcpy(dest->posEncoders, p->posEncoders, sizeof(p->posEncoders));
++  memcpy(dest->posAlignEncoder, p->posAlignEncoder, sizeof(p->posAlignEncoder));
++  memcpy(dest->reps, p->reps, sizeof(p->reps));
++  memcpy(dest->litProbs, p->litProbs, (0x300 << dest->lclp) * sizeof(CLzmaProb));
++}
++
++SRes LzmaEnc_SetProps(CLzmaEncHandle pp, const CLzmaEncProps *props2)
++{
++  CLzmaEnc *p = (CLzmaEnc *)pp;
++  CLzmaEncProps props = *props2;
++  LzmaEncProps_Normalize(&props);
++
++  if (props.lc > LZMA_LC_MAX || props.lp > LZMA_LP_MAX || props.pb > LZMA_PB_MAX ||
++      props.dictSize > (1 << kDicLogSizeMaxCompress) || props.dictSize > (1 << 30))
++    return SZ_ERROR_PARAM;
++  p->dictSize = props.dictSize;
++  p->matchFinderCycles = props.mc;
++  {
++    unsigned fb = props.fb;
++    if (fb < 5)
++      fb = 5;
++    if (fb > LZMA_MATCH_LEN_MAX)
++      fb = LZMA_MATCH_LEN_MAX;
++    p->numFastBytes = fb;
++  }
++  p->lc = props.lc;
++  p->lp = props.lp;
++  p->pb = props.pb;
++  p->fastMode = (props.algo == 0);
++  p->matchFinderBase.btMode = props.btMode;
++  {
++    UInt32 numHashBytes = 4;
++    if (props.btMode)
++    {
++      if (props.numHashBytes < 2)
++        numHashBytes = 2;
++      else if (props.numHashBytes < 4)
++        numHashBytes = props.numHashBytes;
++    }
++    p->matchFinderBase.numHashBytes = numHashBytes;
++  }
++
++  p->matchFinderBase.cutValue = props.mc;
++
++  p->writeEndMark = props.writeEndMark;
++
++  #ifndef _7ZIP_ST
++  /*
++  if (newMultiThread != _multiThread)
++  {
++    ReleaseMatchFinder();
++    _multiThread = newMultiThread;
++  }
++  */
++  p->multiThread = (props.numThreads > 1);
++  #endif
++
++  return SZ_OK;
++}
++
++static const int kLiteralNextStates[kNumStates] = {0, 0, 0, 0, 1, 2, 3, 4,  5,  6,   4, 5};
++static const int kMatchNextStates[kNumStates]   = {7, 7, 7, 7, 7, 7, 7, 10, 10, 10, 10, 10};
++static const int kRepNextStates[kNumStates]     = {8, 8, 8, 8, 8, 8, 8, 11, 11, 11, 11, 11};
++static const int kShortRepNextStates[kNumStates]= {9, 9, 9, 9, 9, 9, 9, 11, 11, 11, 11, 11};
++
++#define IsCharState(s) ((s) < 7)
++
++#define GetLenToPosState(len) (((len) < kNumLenToPosStates + 1) ? (len) - 2 : kNumLenToPosStates - 1)
++
++#define kInfinityPrice (1 << 30)
++
++static void RangeEnc_Construct(CRangeEnc *p)
++{
++  p->outStream = 0;
++  p->bufBase = 0;
++}
++
++#define RangeEnc_GetProcessed(p) ((p)->processed + ((p)->buf - (p)->bufBase) + (p)->cacheSize)
++
++#define RC_BUF_SIZE (1 << 16)
++static int RangeEnc_Alloc(CRangeEnc *p, ISzAlloc *alloc)
++{
++  if (p->bufBase == 0)
++  {
++    p->bufBase = (Byte *)alloc->Alloc(alloc, RC_BUF_SIZE);
++    if (p->bufBase == 0)
++      return 0;
++    p->bufLim = p->bufBase + RC_BUF_SIZE;
++  }
++  return 1;
++}
++
++static void RangeEnc_Free(CRangeEnc *p, ISzAlloc *alloc)
++{
++  alloc->Free(alloc, p->bufBase);
++  p->bufBase = 0;
++}
++
++static void RangeEnc_Init(CRangeEnc *p)
++{
++  /* Stream.Init(); */
++  p->low = 0;
++  p->range = 0xFFFFFFFF;
++  p->cacheSize = 1;
++  p->cache = 0;
++
++  p->buf = p->bufBase;
++
++  p->processed = 0;
++  p->res = SZ_OK;
++}
++
++static void RangeEnc_FlushStream(CRangeEnc *p)
++{
++  size_t num;
++  if (p->res != SZ_OK)
++    return;
++  num = p->buf - p->bufBase;
++  if (num != p->outStream->Write(p->outStream, p->bufBase, num))
++    p->res = SZ_ERROR_WRITE;
++  p->processed += num;
++  p->buf = p->bufBase;
++}
++
++static void MY_FAST_CALL RangeEnc_ShiftLow(CRangeEnc *p)
++{
++  if ((UInt32)p->low < (UInt32)0xFF000000 || (int)(p->low >> 32) != 0)
++  {
++    Byte temp = p->cache;
++    do
++    {
++      Byte *buf = p->buf;
++      *buf++ = (Byte)(temp + (Byte)(p->low >> 32));
++      p->buf = buf;
++      if (buf == p->bufLim)
++        RangeEnc_FlushStream(p);
++      temp = 0xFF;
++    }
++    while (--p->cacheSize != 0);
++    p->cache = (Byte)((UInt32)p->low >> 24);
++  }
++  p->cacheSize++;
++  p->low = (UInt32)p->low << 8;
++}
++
++static void RangeEnc_FlushData(CRangeEnc *p)
++{
++  int i;
++  for (i = 0; i < 5; i++)
++    RangeEnc_ShiftLow(p);
++}
++
++static void RangeEnc_EncodeDirectBits(CRangeEnc *p, UInt32 value, int numBits)
++{
++  do
++  {
++    p->range >>= 1;
++    p->low += p->range & (0 - ((value >> --numBits) & 1));
++    if (p->range < kTopValue)
++    {
++      p->range <<= 8;
++      RangeEnc_ShiftLow(p);
++    }
++  }
++  while (numBits != 0);
++}
++
++static void RangeEnc_EncodeBit(CRangeEnc *p, CLzmaProb *prob, UInt32 symbol)
++{
++  UInt32 ttt = *prob;
++  UInt32 newBound = (p->range >> kNumBitModelTotalBits) * ttt;
++  if (symbol == 0)
++  {
++    p->range = newBound;
++    ttt += (kBitModelTotal - ttt) >> kNumMoveBits;
++  }
++  else
++  {
++    p->low += newBound;
++    p->range -= newBound;
++    ttt -= ttt >> kNumMoveBits;
++  }
++  *prob = (CLzmaProb)ttt;
++  if (p->range < kTopValue)
++  {
++    p->range <<= 8;
++    RangeEnc_ShiftLow(p);
++  }
++}
++
++static void LitEnc_Encode(CRangeEnc *p, CLzmaProb *probs, UInt32 symbol)
++{
++  symbol |= 0x100;
++  do
++  {
++    RangeEnc_EncodeBit(p, probs + (symbol >> 8), (symbol >> 7) & 1);
++    symbol <<= 1;
++  }
++  while (symbol < 0x10000);
++}
++
++static void LitEnc_EncodeMatched(CRangeEnc *p, CLzmaProb *probs, UInt32 symbol, UInt32 matchByte)
++{
++  UInt32 offs = 0x100;
++  symbol |= 0x100;
++  do
++  {
++    matchByte <<= 1;
++    RangeEnc_EncodeBit(p, probs + (offs + (matchByte & offs) + (symbol >> 8)), (symbol >> 7) & 1);
++    symbol <<= 1;
++    offs &= ~(matchByte ^ symbol);
++  }
++  while (symbol < 0x10000);
++}
++
++void LzmaEnc_InitPriceTables(UInt32 *ProbPrices)
++{
++  UInt32 i;
++  for (i = (1 << kNumMoveReducingBits) / 2; i < kBitModelTotal; i += (1 << kNumMoveReducingBits))
++  {
++    const int kCyclesBits = kNumBitPriceShiftBits;
++    UInt32 w = i;
++    UInt32 bitCount = 0;
++    int j;
++    for (j = 0; j < kCyclesBits; j++)
++    {
++      w = w * w;
++      bitCount <<= 1;
++      while (w >= ((UInt32)1 << 16))
++      {
++        w >>= 1;
++        bitCount++;
++      }
++    }
++    ProbPrices[i >> kNumMoveReducingBits] = ((kNumBitModelTotalBits << kCyclesBits) - 15 - bitCount);
++  }
++}
++
++
++#define GET_PRICE(prob, symbol) \
++  p->ProbPrices[((prob) ^ (((-(int)(symbol))) & (kBitModelTotal - 1))) >> kNumMoveReducingBits];
++
++#define GET_PRICEa(prob, symbol) \
++  ProbPrices[((prob) ^ ((-((int)(symbol))) & (kBitModelTotal - 1))) >> kNumMoveReducingBits];
++
++#define GET_PRICE_0(prob) p->ProbPrices[(prob) >> kNumMoveReducingBits]
++#define GET_PRICE_1(prob) p->ProbPrices[((prob) ^ (kBitModelTotal - 1)) >> kNumMoveReducingBits]
++
++#define GET_PRICE_0a(prob) ProbPrices[(prob) >> kNumMoveReducingBits]
++#define GET_PRICE_1a(prob) ProbPrices[((prob) ^ (kBitModelTotal - 1)) >> kNumMoveReducingBits]
++
++static UInt32 LitEnc_GetPrice(const CLzmaProb *probs, UInt32 symbol, UInt32 *ProbPrices)
++{
++  UInt32 price = 0;
++  symbol |= 0x100;
++  do
++  {
++    price += GET_PRICEa(probs[symbol >> 8], (symbol >> 7) & 1);
++    symbol <<= 1;
++  }
++  while (symbol < 0x10000);
++  return price;
++}
++
++static UInt32 LitEnc_GetPriceMatched(const CLzmaProb *probs, UInt32 symbol, UInt32 matchByte, UInt32 *ProbPrices)
++{
++  UInt32 price = 0;
++  UInt32 offs = 0x100;
++  symbol |= 0x100;
++  do
++  {
++    matchByte <<= 1;
++    price += GET_PRICEa(probs[offs + (matchByte & offs) + (symbol >> 8)], (symbol >> 7) & 1);
++    symbol <<= 1;
++    offs &= ~(matchByte ^ symbol);
++  }
++  while (symbol < 0x10000);
++  return price;
++}
++
++
++static void RcTree_Encode(CRangeEnc *rc, CLzmaProb *probs, int numBitLevels, UInt32 symbol)
++{
++  UInt32 m = 1;
++  int i;
++  for (i = numBitLevels; i != 0;)
++  {
++    UInt32 bit;
++    i--;
++    bit = (symbol >> i) & 1;
++    RangeEnc_EncodeBit(rc, probs + m, bit);
++    m = (m << 1) | bit;
++  }
++}
++
++static void RcTree_ReverseEncode(CRangeEnc *rc, CLzmaProb *probs, int numBitLevels, UInt32 symbol)
++{
++  UInt32 m = 1;
++  int i;
++  for (i = 0; i < numBitLevels; i++)
++  {
++    UInt32 bit = symbol & 1;
++    RangeEnc_EncodeBit(rc, probs + m, bit);
++    m = (m << 1) | bit;
++    symbol >>= 1;
++  }
++}
++
++static UInt32 RcTree_GetPrice(const CLzmaProb *probs, int numBitLevels, UInt32 symbol, UInt32 *ProbPrices)
++{
++  UInt32 price = 0;
++  symbol |= (1 << numBitLevels);
++  while (symbol != 1)
++  {
++    price += GET_PRICEa(probs[symbol >> 1], symbol & 1);
++    symbol >>= 1;
++  }
++  return price;
++}
++
++static UInt32 RcTree_ReverseGetPrice(const CLzmaProb *probs, int numBitLevels, UInt32 symbol, UInt32 *ProbPrices)
++{
++  UInt32 price = 0;
++  UInt32 m = 1;
++  int i;
++  for (i = numBitLevels; i != 0; i--)
++  {
++    UInt32 bit = symbol & 1;
++    symbol >>= 1;
++    price += GET_PRICEa(probs[m], bit);
++    m = (m << 1) | bit;
++  }
++  return price;
++}
++
++
++static void LenEnc_Init(CLenEnc *p)
++{
++  unsigned i;
++  p->choice = p->choice2 = kProbInitValue;
++  for (i = 0; i < (LZMA_NUM_PB_STATES_MAX << kLenNumLowBits); i++)
++    p->low[i] = kProbInitValue;
++  for (i = 0; i < (LZMA_NUM_PB_STATES_MAX << kLenNumMidBits); i++)
++    p->mid[i] = kProbInitValue;
++  for (i = 0; i < kLenNumHighSymbols; i++)
++    p->high[i] = kProbInitValue;
++}
++
++static void LenEnc_Encode(CLenEnc *p, CRangeEnc *rc, UInt32 symbol, UInt32 posState)
++{
++  if (symbol < kLenNumLowSymbols)
++  {
++    RangeEnc_EncodeBit(rc, &p->choice, 0);
++    RcTree_Encode(rc, p->low + (posState << kLenNumLowBits), kLenNumLowBits, symbol);
++  }
++  else
++  {
++    RangeEnc_EncodeBit(rc, &p->choice, 1);
++    if (symbol < kLenNumLowSymbols + kLenNumMidSymbols)
++    {
++      RangeEnc_EncodeBit(rc, &p->choice2, 0);
++      RcTree_Encode(rc, p->mid + (posState << kLenNumMidBits), kLenNumMidBits, symbol - kLenNumLowSymbols);
++    }
++    else
++    {
++      RangeEnc_EncodeBit(rc, &p->choice2, 1);
++      RcTree_Encode(rc, p->high, kLenNumHighBits, symbol - kLenNumLowSymbols - kLenNumMidSymbols);
++    }
++  }
++}
++
++static void LenEnc_SetPrices(CLenEnc *p, UInt32 posState, UInt32 numSymbols, UInt32 *prices, UInt32 *ProbPrices)
++{
++  UInt32 a0 = GET_PRICE_0a(p->choice);
++  UInt32 a1 = GET_PRICE_1a(p->choice);
++  UInt32 b0 = a1 + GET_PRICE_0a(p->choice2);
++  UInt32 b1 = a1 + GET_PRICE_1a(p->choice2);
++  UInt32 i = 0;
++  for (i = 0; i < kLenNumLowSymbols; i++)
++  {
++    if (i >= numSymbols)
++      return;
++    prices[i] = a0 + RcTree_GetPrice(p->low + (posState << kLenNumLowBits), kLenNumLowBits, i, ProbPrices);
++  }
++  for (; i < kLenNumLowSymbols + kLenNumMidSymbols; i++)
++  {
++    if (i >= numSymbols)
++      return;
++    prices[i] = b0 + RcTree_GetPrice(p->mid + (posState << kLenNumMidBits), kLenNumMidBits, i - kLenNumLowSymbols, ProbPrices);
++  }
++  for (; i < numSymbols; i++)
++    prices[i] = b1 + RcTree_GetPrice(p->high, kLenNumHighBits, i - kLenNumLowSymbols - kLenNumMidSymbols, ProbPrices);
++}
++
++static void MY_FAST_CALL LenPriceEnc_UpdateTable(CLenPriceEnc *p, UInt32 posState, UInt32 *ProbPrices)
++{
++  LenEnc_SetPrices(&p->p, posState, p->tableSize, p->prices[posState], ProbPrices);
++  p->counters[posState] = p->tableSize;
++}
++
++static void LenPriceEnc_UpdateTables(CLenPriceEnc *p, UInt32 numPosStates, UInt32 *ProbPrices)
++{
++  UInt32 posState;
++  for (posState = 0; posState < numPosStates; posState++)
++    LenPriceEnc_UpdateTable(p, posState, ProbPrices);
++}
++
++static void LenEnc_Encode2(CLenPriceEnc *p, CRangeEnc *rc, UInt32 symbol, UInt32 posState, Bool updatePrice, UInt32 *ProbPrices)
++{
++  LenEnc_Encode(&p->p, rc, symbol, posState);
++  if (updatePrice)
++    if (--p->counters[posState] == 0)
++      LenPriceEnc_UpdateTable(p, posState, ProbPrices);
++}
++
++
++
++
++static void MovePos(CLzmaEnc *p, UInt32 num)
++{
++  #ifdef SHOW_STAT
++  ttt += num;
++  printf("\n MovePos %d", num);
++  #endif
++  if (num != 0)
++  {
++    p->additionalOffset += num;
++    p->matchFinder.Skip(p->matchFinderObj, num);
++  }
++}
++
++static UInt32 ReadMatchDistances(CLzmaEnc *p, UInt32 *numDistancePairsRes)
++{
++  UInt32 lenRes = 0, numPairs;
++  p->numAvail = p->matchFinder.GetNumAvailableBytes(p->matchFinderObj);
++  numPairs = p->matchFinder.GetMatches(p->matchFinderObj, p->matches);
++  #ifdef SHOW_STAT
++  printf("\n i = %d numPairs = %d    ", ttt, numPairs / 2);
++  ttt++;
++  {
++    UInt32 i;
++    for (i = 0; i < numPairs; i += 2)
++      printf("%2d %6d   | ", p->matches[i], p->matches[i + 1]);
++  }
++  #endif
++  if (numPairs > 0)
++  {
++    lenRes = p->matches[numPairs - 2];
++    if (lenRes == p->numFastBytes)
++    {
++      const Byte *pby = p->matchFinder.GetPointerToCurrentPos(p->matchFinderObj) - 1;
++      UInt32 distance = p->matches[numPairs - 1] + 1;
++      UInt32 numAvail = p->numAvail;
++      if (numAvail > LZMA_MATCH_LEN_MAX)
++        numAvail = LZMA_MATCH_LEN_MAX;
++      {
++        const Byte *pby2 = pby - distance;
++        for (; lenRes < numAvail && pby[lenRes] == pby2[lenRes]; lenRes++);
++      }
++    }
++  }
++  p->additionalOffset++;
++  *numDistancePairsRes = numPairs;
++  return lenRes;
++}
++
++
++#define MakeAsChar(p) (p)->backPrev = (UInt32)(-1); (p)->prev1IsChar = False;
++#define MakeAsShortRep(p) (p)->backPrev = 0; (p)->prev1IsChar = False;
++#define IsShortRep(p) ((p)->backPrev == 0)
++
++static UInt32 GetRepLen1Price(CLzmaEnc *p, UInt32 state, UInt32 posState)
++{
++  return
++    GET_PRICE_0(p->isRepG0[state]) +
++    GET_PRICE_0(p->isRep0Long[state][posState]);
++}
++
++static UInt32 GetPureRepPrice(CLzmaEnc *p, UInt32 repIndex, UInt32 state, UInt32 posState)
++{
++  UInt32 price;
++  if (repIndex == 0)
++  {
++    price = GET_PRICE_0(p->isRepG0[state]);
++    price += GET_PRICE_1(p->isRep0Long[state][posState]);
++  }
++  else
++  {
++    price = GET_PRICE_1(p->isRepG0[state]);
++    if (repIndex == 1)
++      price += GET_PRICE_0(p->isRepG1[state]);
++    else
++    {
++      price += GET_PRICE_1(p->isRepG1[state]);
++      price += GET_PRICE(p->isRepG2[state], repIndex - 2);
++    }
++  }
++  return price;
++}
++
++static UInt32 GetRepPrice(CLzmaEnc *p, UInt32 repIndex, UInt32 len, UInt32 state, UInt32 posState)
++{
++  return p->repLenEnc.prices[posState][len - LZMA_MATCH_LEN_MIN] +
++    GetPureRepPrice(p, repIndex, state, posState);
++}
++
++static UInt32 Backward(CLzmaEnc *p, UInt32 *backRes, UInt32 cur)
++{
++  UInt32 posMem = p->opt[cur].posPrev;
++  UInt32 backMem = p->opt[cur].backPrev;
++  p->optimumEndIndex = cur;
++  do
++  {
++    if (p->opt[cur].prev1IsChar)
++    {
++      MakeAsChar(&p->opt[posMem])
++      p->opt[posMem].posPrev = posMem - 1;
++      if (p->opt[cur].prev2)
++      {
++        p->opt[posMem - 1].prev1IsChar = False;
++        p->opt[posMem - 1].posPrev = p->opt[cur].posPrev2;
++        p->opt[posMem - 1].backPrev = p->opt[cur].backPrev2;
++      }
++    }
++    {
++      UInt32 posPrev = posMem;
++      UInt32 backCur = backMem;
++      
++      backMem = p->opt[posPrev].backPrev;
++      posMem = p->opt[posPrev].posPrev;
++      
++      p->opt[posPrev].backPrev = backCur;
++      p->opt[posPrev].posPrev = cur;
++      cur = posPrev;
++    }
++  }
++  while (cur != 0);
++  *backRes = p->opt[0].backPrev;
++  p->optimumCurrentIndex  = p->opt[0].posPrev;
++  return p->optimumCurrentIndex;
++}
++
++#define LIT_PROBS(pos, prevByte) (p->litProbs + ((((pos) & p->lpMask) << p->lc) + ((prevByte) >> (8 - p->lc))) * 0x300)
++
++static UInt32 GetOptimum(CLzmaEnc *p, UInt32 position, UInt32 *backRes)
++{
++  UInt32 numAvail, mainLen, numPairs, repMaxIndex, i, posState, lenEnd, len, cur;
++  UInt32 matchPrice, repMatchPrice, normalMatchPrice;
++  UInt32 reps[LZMA_NUM_REPS], repLens[LZMA_NUM_REPS];
++  UInt32 *matches;
++  const Byte *data;
++  Byte curByte, matchByte;
++  if (p->optimumEndIndex != p->optimumCurrentIndex)
++  {
++    const COptimal *opt = &p->opt[p->optimumCurrentIndex];
++    UInt32 lenRes = opt->posPrev - p->optimumCurrentIndex;
++    *backRes = opt->backPrev;
++    p->optimumCurrentIndex = opt->posPrev;
++    return lenRes;
++  }
++  p->optimumCurrentIndex = p->optimumEndIndex = 0;
++  
++  if (p->additionalOffset == 0)
++    mainLen = ReadMatchDistances(p, &numPairs);
++  else
++  {
++    mainLen = p->longestMatchLength;
++    numPairs = p->numPairs;
++  }
++
++  numAvail = p->numAvail;
++  if (numAvail < 2)
++  {
++    *backRes = (UInt32)(-1);
++    return 1;
++  }
++  if (numAvail > LZMA_MATCH_LEN_MAX)
++    numAvail = LZMA_MATCH_LEN_MAX;
++
++  data = p->matchFinder.GetPointerToCurrentPos(p->matchFinderObj) - 1;
++  repMaxIndex = 0;
++  for (i = 0; i < LZMA_NUM_REPS; i++)
++  {
++    UInt32 lenTest;
++    const Byte *data2;
++    reps[i] = p->reps[i];
++    data2 = data - (reps[i] + 1);
++    if (data[0] != data2[0] || data[1] != data2[1])
++    {
++      repLens[i] = 0;
++      continue;
++    }
++    for (lenTest = 2; lenTest < numAvail && data[lenTest] == data2[lenTest]; lenTest++);
++    repLens[i] = lenTest;
++    if (lenTest > repLens[repMaxIndex])
++      repMaxIndex = i;
++  }
++  if (repLens[repMaxIndex] >= p->numFastBytes)
++  {
++    UInt32 lenRes;
++    *backRes = repMaxIndex;
++    lenRes = repLens[repMaxIndex];
++    MovePos(p, lenRes - 1);
++    return lenRes;
++  }
++
++  matches = p->matches;
++  if (mainLen >= p->numFastBytes)
++  {
++    *backRes = matches[numPairs - 1] + LZMA_NUM_REPS;
++    MovePos(p, mainLen - 1);
++    return mainLen;
++  }
++  curByte = *data;
++  matchByte = *(data - (reps[0] + 1));
++
++  if (mainLen < 2 && curByte != matchByte && repLens[repMaxIndex] < 2)
++  {
++    *backRes = (UInt32)-1;
++    return 1;
++  }
++
++  p->opt[0].state = (CState)p->state;
++
++  posState = (position & p->pbMask);
++
++  {
++    const CLzmaProb *probs = LIT_PROBS(position, *(data - 1));
++    p->opt[1].price = GET_PRICE_0(p->isMatch[p->state][posState]) +
++        (!IsCharState(p->state) ?
++          LitEnc_GetPriceMatched(probs, curByte, matchByte, p->ProbPrices) :
++          LitEnc_GetPrice(probs, curByte, p->ProbPrices));
++  }
++
++  MakeAsChar(&p->opt[1]);
++
++  matchPrice = GET_PRICE_1(p->isMatch[p->state][posState]);
++  repMatchPrice = matchPrice + GET_PRICE_1(p->isRep[p->state]);
++
++  if (matchByte == curByte)
++  {
++    UInt32 shortRepPrice = repMatchPrice + GetRepLen1Price(p, p->state, posState);
++    if (shortRepPrice < p->opt[1].price)
++    {
++      p->opt[1].price = shortRepPrice;
++      MakeAsShortRep(&p->opt[1]);
++    }
++  }
++  lenEnd = ((mainLen >= repLens[repMaxIndex]) ? mainLen : repLens[repMaxIndex]);
++
++  if (lenEnd < 2)
++  {
++    *backRes = p->opt[1].backPrev;
++    return 1;
++  }
++
++  p->opt[1].posPrev = 0;
++  for (i = 0; i < LZMA_NUM_REPS; i++)
++    p->opt[0].backs[i] = reps[i];
++
++  len = lenEnd;
++  do
++    p->opt[len--].price = kInfinityPrice;
++  while (len >= 2);
++
++  for (i = 0; i < LZMA_NUM_REPS; i++)
++  {
++    UInt32 repLen = repLens[i];
++    UInt32 price;
++    if (repLen < 2)
++      continue;
++    price = repMatchPrice + GetPureRepPrice(p, i, p->state, posState);
++    do
++    {
++      UInt32 curAndLenPrice = price + p->repLenEnc.prices[posState][repLen - 2];
++      COptimal *opt = &p->opt[repLen];
++      if (curAndLenPrice < opt->price)
++      {
++        opt->price = curAndLenPrice;
++        opt->posPrev = 0;
++        opt->backPrev = i;
++        opt->prev1IsChar = False;
++      }
++    }
++    while (--repLen >= 2);
++  }
++
++  normalMatchPrice = matchPrice + GET_PRICE_0(p->isRep[p->state]);
++
++  len = ((repLens[0] >= 2) ? repLens[0] + 1 : 2);
++  if (len <= mainLen)
++  {
++    UInt32 offs = 0;
++    while (len > matches[offs])
++      offs += 2;
++    for (; ; len++)
++    {
++      COptimal *opt;
++      UInt32 distance = matches[offs + 1];
++
++      UInt32 curAndLenPrice = normalMatchPrice + p->lenEnc.prices[posState][len - LZMA_MATCH_LEN_MIN];
++      UInt32 lenToPosState = GetLenToPosState(len);
++      if (distance < kNumFullDistances)
++        curAndLenPrice += p->distancesPrices[lenToPosState][distance];
++      else
++      {
++        UInt32 slot;
++        GetPosSlot2(distance, slot);
++        curAndLenPrice += p->alignPrices[distance & kAlignMask] + p->posSlotPrices[lenToPosState][slot];
++      }
++      opt = &p->opt[len];
++      if (curAndLenPrice < opt->price)
++      {
++        opt->price = curAndLenPrice;
++        opt->posPrev = 0;
++        opt->backPrev = distance + LZMA_NUM_REPS;
++        opt->prev1IsChar = False;
++      }
++      if (len == matches[offs])
++      {
++        offs += 2;
++        if (offs == numPairs)
++          break;
++      }
++    }
++  }
++
++  cur = 0;
++
++    #ifdef SHOW_STAT2
++    if (position >= 0)
++    {
++      unsigned i;
++      printf("\n pos = %4X", position);
++      for (i = cur; i <= lenEnd; i++)
++      printf("\nprice[%4X] = %d", position - cur + i, p->opt[i].price);
++    }
++    #endif
++
++  for (;;)
++  {
++    UInt32 numAvailFull, newLen, numPairs, posPrev, state, posState, startLen;
++    UInt32 curPrice, curAnd1Price, matchPrice, repMatchPrice;
++    Bool nextIsChar;
++    Byte curByte, matchByte;
++    const Byte *data;
++    COptimal *curOpt;
++    COptimal *nextOpt;
++
++    cur++;
++    if (cur == lenEnd)
++      return Backward(p, backRes, cur);
++
++    newLen = ReadMatchDistances(p, &numPairs);
++    if (newLen >= p->numFastBytes)
++    {
++      p->numPairs = numPairs;
++      p->longestMatchLength = newLen;
++      return Backward(p, backRes, cur);
++    }
++    position++;
++    curOpt = &p->opt[cur];
++    posPrev = curOpt->posPrev;
++    if (curOpt->prev1IsChar)
++    {
++      posPrev--;
++      if (curOpt->prev2)
++      {
++        state = p->opt[curOpt->posPrev2].state;
++        if (curOpt->backPrev2 < LZMA_NUM_REPS)
++          state = kRepNextStates[state];
++        else
++          state = kMatchNextStates[state];
++      }
++      else
++        state = p->opt[posPrev].state;
++      state = kLiteralNextStates[state];
++    }
++    else
++      state = p->opt[posPrev].state;
++    if (posPrev == cur - 1)
++    {
++      if (IsShortRep(curOpt))
++        state = kShortRepNextStates[state];
++      else
++        state = kLiteralNextStates[state];
++    }
++    else
++    {
++      UInt32 pos;
++      const COptimal *prevOpt;
++      if (curOpt->prev1IsChar && curOpt->prev2)
++      {
++        posPrev = curOpt->posPrev2;
++        pos = curOpt->backPrev2;
++        state = kRepNextStates[state];
++      }
++      else
++      {
++        pos = curOpt->backPrev;
++        if (pos < LZMA_NUM_REPS)
++          state = kRepNextStates[state];
++        else
++          state = kMatchNextStates[state];
++      }
++      prevOpt = &p->opt[posPrev];
++      if (pos < LZMA_NUM_REPS)
++      {
++        UInt32 i;
++        reps[0] = prevOpt->backs[pos];
++        for (i = 1; i <= pos; i++)
++          reps[i] = prevOpt->backs[i - 1];
++        for (; i < LZMA_NUM_REPS; i++)
++          reps[i] = prevOpt->backs[i];
++      }
++      else
++      {
++        UInt32 i;
++        reps[0] = (pos - LZMA_NUM_REPS);
++        for (i = 1; i < LZMA_NUM_REPS; i++)
++          reps[i] = prevOpt->backs[i - 1];
++      }
++    }
++    curOpt->state = (CState)state;
++
++    curOpt->backs[0] = reps[0];
++    curOpt->backs[1] = reps[1];
++    curOpt->backs[2] = reps[2];
++    curOpt->backs[3] = reps[3];
++
++    curPrice = curOpt->price;
++    nextIsChar = False;
++    data = p->matchFinder.GetPointerToCurrentPos(p->matchFinderObj) - 1;
++    curByte = *data;
++    matchByte = *(data - (reps[0] + 1));
++
++    posState = (position & p->pbMask);
++
++    curAnd1Price = curPrice + GET_PRICE_0(p->isMatch[state][posState]);
++    {
++      const CLzmaProb *probs = LIT_PROBS(position, *(data - 1));
++      curAnd1Price +=
++        (!IsCharState(state) ?
++          LitEnc_GetPriceMatched(probs, curByte, matchByte, p->ProbPrices) :
++          LitEnc_GetPrice(probs, curByte, p->ProbPrices));
++    }
++
++    nextOpt = &p->opt[cur + 1];
++
++    if (curAnd1Price < nextOpt->price)
++    {
++      nextOpt->price = curAnd1Price;
++      nextOpt->posPrev = cur;
++      MakeAsChar(nextOpt);
++      nextIsChar = True;
++    }
++
++    matchPrice = curPrice + GET_PRICE_1(p->isMatch[state][posState]);
++    repMatchPrice = matchPrice + GET_PRICE_1(p->isRep[state]);
++    
++    if (matchByte == curByte && !(nextOpt->posPrev < cur && nextOpt->backPrev == 0))
++    {
++      UInt32 shortRepPrice = repMatchPrice + GetRepLen1Price(p, state, posState);
++      if (shortRepPrice <= nextOpt->price)
++      {
++        nextOpt->price = shortRepPrice;
++        nextOpt->posPrev = cur;
++        MakeAsShortRep(nextOpt);
++        nextIsChar = True;
++      }
++    }
++    numAvailFull = p->numAvail;
++    {
++      UInt32 temp = kNumOpts - 1 - cur;
++      if (temp < numAvailFull)
++        numAvailFull = temp;
++    }
++
++    if (numAvailFull < 2)
++      continue;
++    numAvail = (numAvailFull <= p->numFastBytes ? numAvailFull : p->numFastBytes);
++
++    if (!nextIsChar && matchByte != curByte) /* speed optimization */
++    {
++      /* try Literal + rep0 */
++      UInt32 temp;
++      UInt32 lenTest2;
++      const Byte *data2 = data - (reps[0] + 1);
++      UInt32 limit = p->numFastBytes + 1;
++      if (limit > numAvailFull)
++        limit = numAvailFull;
++
++      for (temp = 1; temp < limit && data[temp] == data2[temp]; temp++);
++      lenTest2 = temp - 1;
++      if (lenTest2 >= 2)
++      {
++        UInt32 state2 = kLiteralNextStates[state];
++        UInt32 posStateNext = (position + 1) & p->pbMask;
++        UInt32 nextRepMatchPrice = curAnd1Price +
++            GET_PRICE_1(p->isMatch[state2][posStateNext]) +
++            GET_PRICE_1(p->isRep[state2]);
++        /* for (; lenTest2 >= 2; lenTest2--) */
++        {
++          UInt32 curAndLenPrice;
++          COptimal *opt;
++          UInt32 offset = cur + 1 + lenTest2;
++          while (lenEnd < offset)
++            p->opt[++lenEnd].price = kInfinityPrice;
++          curAndLenPrice = nextRepMatchPrice + GetRepPrice(p, 0, lenTest2, state2, posStateNext);
++          opt = &p->opt[offset];
++          if (curAndLenPrice < opt->price)
++          {
++            opt->price = curAndLenPrice;
++            opt->posPrev = cur + 1;
++            opt->backPrev = 0;
++            opt->prev1IsChar = True;
++            opt->prev2 = False;
++          }
++        }
++      }
++    }
++    
++    startLen = 2; /* speed optimization */
++    {
++    UInt32 repIndex;
++    for (repIndex = 0; repIndex < LZMA_NUM_REPS; repIndex++)
++    {
++      UInt32 lenTest;
++      UInt32 lenTestTemp;
++      UInt32 price;
++      const Byte *data2 = data - (reps[repIndex] + 1);
++      if (data[0] != data2[0] || data[1] != data2[1])
++        continue;
++      for (lenTest = 2; lenTest < numAvail && data[lenTest] == data2[lenTest]; lenTest++);
++      while (lenEnd < cur + lenTest)
++        p->opt[++lenEnd].price = kInfinityPrice;
++      lenTestTemp = lenTest;
++      price = repMatchPrice + GetPureRepPrice(p, repIndex, state, posState);
++      do
++      {
++        UInt32 curAndLenPrice = price + p->repLenEnc.prices[posState][lenTest - 2];
++        COptimal *opt = &p->opt[cur + lenTest];
++        if (curAndLenPrice < opt->price)
++        {
++          opt->price = curAndLenPrice;
++          opt->posPrev = cur;
++          opt->backPrev = repIndex;
++          opt->prev1IsChar = False;
++        }
++      }
++      while (--lenTest >= 2);
++      lenTest = lenTestTemp;
++      
++      if (repIndex == 0)
++        startLen = lenTest + 1;
++        
++      /* if (_maxMode) */
++        {
++          UInt32 lenTest2 = lenTest + 1;
++          UInt32 limit = lenTest2 + p->numFastBytes;
++          UInt32 nextRepMatchPrice;
++          if (limit > numAvailFull)
++            limit = numAvailFull;
++          for (; lenTest2 < limit && data[lenTest2] == data2[lenTest2]; lenTest2++);
++          lenTest2 -= lenTest + 1;
++          if (lenTest2 >= 2)
++          {
++            UInt32 state2 = kRepNextStates[state];
++            UInt32 posStateNext = (position + lenTest) & p->pbMask;
++            UInt32 curAndLenCharPrice =
++                price + p->repLenEnc.prices[posState][lenTest - 2] +
++                GET_PRICE_0(p->isMatch[state2][posStateNext]) +
++                LitEnc_GetPriceMatched(LIT_PROBS(position + lenTest, data[lenTest - 1]),
++                    data[lenTest], data2[lenTest], p->ProbPrices);
++            state2 = kLiteralNextStates[state2];
++            posStateNext = (position + lenTest + 1) & p->pbMask;
++            nextRepMatchPrice = curAndLenCharPrice +
++                GET_PRICE_1(p->isMatch[state2][posStateNext]) +
++                GET_PRICE_1(p->isRep[state2]);
++            
++            /* for (; lenTest2 >= 2; lenTest2--) */
++            {
++              UInt32 curAndLenPrice;
++              COptimal *opt;
++              UInt32 offset = cur + lenTest + 1 + lenTest2;
++              while (lenEnd < offset)
++                p->opt[++lenEnd].price = kInfinityPrice;
++              curAndLenPrice = nextRepMatchPrice + GetRepPrice(p, 0, lenTest2, state2, posStateNext);
++              opt = &p->opt[offset];
++              if (curAndLenPrice < opt->price)
++              {
++                opt->price = curAndLenPrice;
++                opt->posPrev = cur + lenTest + 1;
++                opt->backPrev = 0;
++                opt->prev1IsChar = True;
++                opt->prev2 = True;
++                opt->posPrev2 = cur;
++                opt->backPrev2 = repIndex;
++              }
++            }
++          }
++        }
++    }
++    }
++    /* for (UInt32 lenTest = 2; lenTest <= newLen; lenTest++) */
++    if (newLen > numAvail)
++    {
++      newLen = numAvail;
++      for (numPairs = 0; newLen > matches[numPairs]; numPairs += 2);
++      matches[numPairs] = newLen;
++      numPairs += 2;
++    }
++    if (newLen >= startLen)
++    {
++      UInt32 normalMatchPrice = matchPrice + GET_PRICE_0(p->isRep[state]);
++      UInt32 offs, curBack, posSlot;
++      UInt32 lenTest;
++      while (lenEnd < cur + newLen)
++        p->opt[++lenEnd].price = kInfinityPrice;
++
++      offs = 0;
++      while (startLen > matches[offs])
++        offs += 2;
++      curBack = matches[offs + 1];
++      GetPosSlot2(curBack, posSlot);
++      for (lenTest = /*2*/ startLen; ; lenTest++)
++      {
++        UInt32 curAndLenPrice = normalMatchPrice + p->lenEnc.prices[posState][lenTest - LZMA_MATCH_LEN_MIN];
++        UInt32 lenToPosState = GetLenToPosState(lenTest);
++        COptimal *opt;
++        if (curBack < kNumFullDistances)
++          curAndLenPrice += p->distancesPrices[lenToPosState][curBack];
++        else
++          curAndLenPrice += p->posSlotPrices[lenToPosState][posSlot] + p->alignPrices[curBack & kAlignMask];
++        
++        opt = &p->opt[cur + lenTest];
++        if (curAndLenPrice < opt->price)
++        {
++          opt->price = curAndLenPrice;
++          opt->posPrev = cur;
++          opt->backPrev = curBack + LZMA_NUM_REPS;
++          opt->prev1IsChar = False;
++        }
++
++        if (/*_maxMode && */lenTest == matches[offs])
++        {
++          /* Try Match + Literal + Rep0 */
++          const Byte *data2 = data - (curBack + 1);
++          UInt32 lenTest2 = lenTest + 1;
++          UInt32 limit = lenTest2 + p->numFastBytes;
++          UInt32 nextRepMatchPrice;
++          if (limit > numAvailFull)
++            limit = numAvailFull;
++          for (; lenTest2 < limit && data[lenTest2] == data2[lenTest2]; lenTest2++);
++          lenTest2 -= lenTest + 1;
++          if (lenTest2 >= 2)
++          {
++            UInt32 state2 = kMatchNextStates[state];
++            UInt32 posStateNext = (position + lenTest) & p->pbMask;
++            UInt32 curAndLenCharPrice = curAndLenPrice +
++                GET_PRICE_0(p->isMatch[state2][posStateNext]) +
++                LitEnc_GetPriceMatched(LIT_PROBS(position + lenTest, data[lenTest - 1]),
++                    data[lenTest], data2[lenTest], p->ProbPrices);
++            state2 = kLiteralNextStates[state2];
++            posStateNext = (posStateNext + 1) & p->pbMask;
++            nextRepMatchPrice = curAndLenCharPrice +
++                GET_PRICE_1(p->isMatch[state2][posStateNext]) +
++                GET_PRICE_1(p->isRep[state2]);
++            
++            /* for (; lenTest2 >= 2; lenTest2--) */
++            {
++              UInt32 offset = cur + lenTest + 1 + lenTest2;
++              UInt32 curAndLenPrice;
++              COptimal *opt;
++              while (lenEnd < offset)
++                p->opt[++lenEnd].price = kInfinityPrice;
++              curAndLenPrice = nextRepMatchPrice + GetRepPrice(p, 0, lenTest2, state2, posStateNext);
++              opt = &p->opt[offset];
++              if (curAndLenPrice < opt->price)
++              {
++                opt->price = curAndLenPrice;
++                opt->posPrev = cur + lenTest + 1;
++                opt->backPrev = 0;
++                opt->prev1IsChar = True;
++                opt->prev2 = True;
++                opt->posPrev2 = cur;
++                opt->backPrev2 = curBack + LZMA_NUM_REPS;
++              }
++            }
++          }
++          offs += 2;
++          if (offs == numPairs)
++            break;
++          curBack = matches[offs + 1];
++          if (curBack >= kNumFullDistances)
++            GetPosSlot2(curBack, posSlot);
++        }
++      }
++    }
++  }
++}
++
++#define ChangePair(smallDist, bigDist) (((bigDist) >> 7) > (smallDist))
++
++static UInt32 GetOptimumFast(CLzmaEnc *p, UInt32 *backRes)
++{
++  UInt32 numAvail, mainLen, mainDist, numPairs, repIndex, repLen, i;
++  const Byte *data;
++  const UInt32 *matches;
++
++  if (p->additionalOffset == 0)
++    mainLen = ReadMatchDistances(p, &numPairs);
++  else
++  {
++    mainLen = p->longestMatchLength;
++    numPairs = p->numPairs;
++  }
++
++  numAvail = p->numAvail;
++  *backRes = (UInt32)-1;
++  if (numAvail < 2)
++    return 1;
++  if (numAvail > LZMA_MATCH_LEN_MAX)
++    numAvail = LZMA_MATCH_LEN_MAX;
++  data = p->matchFinder.GetPointerToCurrentPos(p->matchFinderObj) - 1;
++
++  repLen = repIndex = 0;
++  for (i = 0; i < LZMA_NUM_REPS; i++)
++  {
++    UInt32 len;
++    const Byte *data2 = data - (p->reps[i] + 1);
++    if (data[0] != data2[0] || data[1] != data2[1])
++      continue;
++    for (len = 2; len < numAvail && data[len] == data2[len]; len++);
++    if (len >= p->numFastBytes)
++    {
++      *backRes = i;
++      MovePos(p, len - 1);
++      return len;
++    }
++    if (len > repLen)
++    {
++      repIndex = i;
++      repLen = len;
++    }
++  }
++
++  matches = p->matches;
++  if (mainLen >= p->numFastBytes)
++  {
++    *backRes = matches[numPairs - 1] + LZMA_NUM_REPS;
++    MovePos(p, mainLen - 1);
++    return mainLen;
++  }
++
++  mainDist = 0; /* for GCC */
++  if (mainLen >= 2)
++  {
++    mainDist = matches[numPairs - 1];
++    while (numPairs > 2 && mainLen == matches[numPairs - 4] + 1)
++    {
++      if (!ChangePair(matches[numPairs - 3], mainDist))
++        break;
++      numPairs -= 2;
++      mainLen = matches[numPairs - 2];
++      mainDist = matches[numPairs - 1];
++    }
++    if (mainLen == 2 && mainDist >= 0x80)
++      mainLen = 1;
++  }
++
++  if (repLen >= 2 && (
++        (repLen + 1 >= mainLen) ||
++        (repLen + 2 >= mainLen && mainDist >= (1 << 9)) ||
++        (repLen + 3 >= mainLen && mainDist >= (1 << 15))))
++  {
++    *backRes = repIndex;
++    MovePos(p, repLen - 1);
++    return repLen;
++  }
++  
++  if (mainLen < 2 || numAvail <= 2)
++    return 1;
++
++  p->longestMatchLength = ReadMatchDistances(p, &p->numPairs);
++  if (p->longestMatchLength >= 2)
++  {
++    UInt32 newDistance = matches[p->numPairs - 1];
++    if ((p->longestMatchLength >= mainLen && newDistance < mainDist) ||
++        (p->longestMatchLength == mainLen + 1 && !ChangePair(mainDist, newDistance)) ||
++        (p->longestMatchLength > mainLen + 1) ||
++        (p->longestMatchLength + 1 >= mainLen && mainLen >= 3 && ChangePair(newDistance, mainDist)))
++      return 1;
++  }
++  
++  data = p->matchFinder.GetPointerToCurrentPos(p->matchFinderObj) - 1;
++  for (i = 0; i < LZMA_NUM_REPS; i++)
++  {
++    UInt32 len, limit;
++    const Byte *data2 = data - (p->reps[i] + 1);
++    if (data[0] != data2[0] || data[1] != data2[1])
++      continue;
++    limit = mainLen - 1;
++    for (len = 2; len < limit && data[len] == data2[len]; len++);
++    if (len >= limit)
++      return 1;
++  }
++  *backRes = mainDist + LZMA_NUM_REPS;
++  MovePos(p, mainLen - 2);
++  return mainLen;
++}
++
++static void WriteEndMarker(CLzmaEnc *p, UInt32 posState)
++{
++  UInt32 len;
++  RangeEnc_EncodeBit(&p->rc, &p->isMatch[p->state][posState], 1);
++  RangeEnc_EncodeBit(&p->rc, &p->isRep[p->state], 0);
++  p->state = kMatchNextStates[p->state];
++  len = LZMA_MATCH_LEN_MIN;
++  LenEnc_Encode2(&p->lenEnc, &p->rc, len - LZMA_MATCH_LEN_MIN, posState, !p->fastMode, p->ProbPrices);
++  RcTree_Encode(&p->rc, p->posSlotEncoder[GetLenToPosState(len)], kNumPosSlotBits, (1 << kNumPosSlotBits) - 1);
++  RangeEnc_EncodeDirectBits(&p->rc, (((UInt32)1 << 30) - 1) >> kNumAlignBits, 30 - kNumAlignBits);
++  RcTree_ReverseEncode(&p->rc, p->posAlignEncoder, kNumAlignBits, kAlignMask);
++}
++
++static SRes CheckErrors(CLzmaEnc *p)
++{
++  if (p->result != SZ_OK)
++    return p->result;
++  if (p->rc.res != SZ_OK)
++    p->result = SZ_ERROR_WRITE;
++  if (p->matchFinderBase.result != SZ_OK)
++    p->result = SZ_ERROR_READ;
++  if (p->result != SZ_OK)
++    p->finished = True;
++  return p->result;
++}
++
++static SRes Flush(CLzmaEnc *p, UInt32 nowPos)
++{
++  /* ReleaseMFStream(); */
++  p->finished = True;
++  if (p->writeEndMark)
++    WriteEndMarker(p, nowPos & p->pbMask);
++  RangeEnc_FlushData(&p->rc);
++  RangeEnc_FlushStream(&p->rc);
++  return CheckErrors(p);
++}
++
++static void FillAlignPrices(CLzmaEnc *p)
++{
++  UInt32 i;
++  for (i = 0; i < kAlignTableSize; i++)
++    p->alignPrices[i] = RcTree_ReverseGetPrice(p->posAlignEncoder, kNumAlignBits, i, p->ProbPrices);
++  p->alignPriceCount = 0;
++}
++
++static void FillDistancesPrices(CLzmaEnc *p)
++{
++  UInt32 tempPrices[kNumFullDistances];
++  UInt32 i, lenToPosState;
++  for (i = kStartPosModelIndex; i < kNumFullDistances; i++)
++  {
++    UInt32 posSlot = GetPosSlot1(i);
++    UInt32 footerBits = ((posSlot >> 1) - 1);
++    UInt32 base = ((2 | (posSlot & 1)) << footerBits);
++    tempPrices[i] = RcTree_ReverseGetPrice(p->posEncoders + base - posSlot - 1, footerBits, i - base, p->ProbPrices);
++  }
++
++  for (lenToPosState = 0; lenToPosState < kNumLenToPosStates; lenToPosState++)
++  {
++    UInt32 posSlot;
++    const CLzmaProb *encoder = p->posSlotEncoder[lenToPosState];
++    UInt32 *posSlotPrices = p->posSlotPrices[lenToPosState];
++    for (posSlot = 0; posSlot < p->distTableSize; posSlot++)
++      posSlotPrices[posSlot] = RcTree_GetPrice(encoder, kNumPosSlotBits, posSlot, p->ProbPrices);
++    for (posSlot = kEndPosModelIndex; posSlot < p->distTableSize; posSlot++)
++      posSlotPrices[posSlot] += ((((posSlot >> 1) - 1) - kNumAlignBits) << kNumBitPriceShiftBits);
++
++    {
++      UInt32 *distancesPrices = p->distancesPrices[lenToPosState];
++      UInt32 i;
++      for (i = 0; i < kStartPosModelIndex; i++)
++        distancesPrices[i] = posSlotPrices[i];
++      for (; i < kNumFullDistances; i++)
++        distancesPrices[i] = posSlotPrices[GetPosSlot1(i)] + tempPrices[i];
++    }
++  }
++  p->matchPriceCount = 0;
++}
++
++void LzmaEnc_Construct(CLzmaEnc *p)
++{
++  RangeEnc_Construct(&p->rc);
++  MatchFinder_Construct(&p->matchFinderBase);
++  #ifndef _7ZIP_ST
++  MatchFinderMt_Construct(&p->matchFinderMt);
++  p->matchFinderMt.MatchFinder = &p->matchFinderBase;
++  #endif
++
++  {
++    CLzmaEncProps props;
++    LzmaEncProps_Init(&props);
++    LzmaEnc_SetProps(p, &props);
++  }
++
++  #ifndef LZMA_LOG_BSR
++  LzmaEnc_FastPosInit(p->g_FastPos);
++  #endif
++
++  LzmaEnc_InitPriceTables(p->ProbPrices);
++  p->litProbs = 0;
++  p->saveState.litProbs = 0;
++}
++
++CLzmaEncHandle LzmaEnc_Create(ISzAlloc *alloc)
++{
++  void *p;
++  p = alloc->Alloc(alloc, sizeof(CLzmaEnc));
++  if (p != 0)
++    LzmaEnc_Construct((CLzmaEnc *)p);
++  return p;
++}
++
++void LzmaEnc_FreeLits(CLzmaEnc *p, ISzAlloc *alloc)
++{
++  alloc->Free(alloc, p->litProbs);
++  alloc->Free(alloc, p->saveState.litProbs);
++  p->litProbs = 0;
++  p->saveState.litProbs = 0;
++}
++
++void LzmaEnc_Destruct(CLzmaEnc *p, ISzAlloc *alloc, ISzAlloc *allocBig)
++{
++  #ifndef _7ZIP_ST
++  MatchFinderMt_Destruct(&p->matchFinderMt, allocBig);
++  #endif
++  MatchFinder_Free(&p->matchFinderBase, allocBig);
++  LzmaEnc_FreeLits(p, alloc);
++  RangeEnc_Free(&p->rc, alloc);
++}
++
++void LzmaEnc_Destroy(CLzmaEncHandle p, ISzAlloc *alloc, ISzAlloc *allocBig)
++{
++  LzmaEnc_Destruct((CLzmaEnc *)p, alloc, allocBig);
++  alloc->Free(alloc, p);
++}
++
++static SRes LzmaEnc_CodeOneBlock(CLzmaEnc *p, Bool useLimits, UInt32 maxPackSize, UInt32 maxUnpackSize)
++{
++  UInt32 nowPos32, startPos32;
++  if (p->needInit)
++  {
++    p->matchFinder.Init(p->matchFinderObj);
++    p->needInit = 0;
++  }
++
++  if (p->finished)
++    return p->result;
++  RINOK(CheckErrors(p));
++
++  nowPos32 = (UInt32)p->nowPos64;
++  startPos32 = nowPos32;
++
++  if (p->nowPos64 == 0)
++  {
++    UInt32 numPairs;
++    Byte curByte;
++    if (p->matchFinder.GetNumAvailableBytes(p->matchFinderObj) == 0)
++      return Flush(p, nowPos32);
++    ReadMatchDistances(p, &numPairs);
++    RangeEnc_EncodeBit(&p->rc, &p->isMatch[p->state][0], 0);
++    p->state = kLiteralNextStates[p->state];
++    curByte = p->matchFinder.GetIndexByte(p->matchFinderObj, 0 - p->additionalOffset);
++    LitEnc_Encode(&p->rc, p->litProbs, curByte);
++    p->additionalOffset--;
++    nowPos32++;
++  }
++
++  if (p->matchFinder.GetNumAvailableBytes(p->matchFinderObj) != 0)
++  for (;;)
++  {
++    UInt32 pos, len, posState;
++
++    if (p->fastMode)
++      len = GetOptimumFast(p, &pos);
++    else
++      len = GetOptimum(p, nowPos32, &pos);
++
++    #ifdef SHOW_STAT2
++    printf("\n pos = %4X,   len = %d   pos = %d", nowPos32, len, pos);
++    #endif
++
++    posState = nowPos32 & p->pbMask;
++    if (len == 1 && pos == (UInt32)-1)
++    {
++      Byte curByte;
++      CLzmaProb *probs;
++      const Byte *data;
++
++      RangeEnc_EncodeBit(&p->rc, &p->isMatch[p->state][posState], 0);
++      data = p->matchFinder.GetPointerToCurrentPos(p->matchFinderObj) - p->additionalOffset;
++      curByte = *data;
++      probs = LIT_PROBS(nowPos32, *(data - 1));
++      if (IsCharState(p->state))
++        LitEnc_Encode(&p->rc, probs, curByte);
++      else
++        LitEnc_EncodeMatched(&p->rc, probs, curByte, *(data - p->reps[0] - 1));
++      p->state = kLiteralNextStates[p->state];
++    }
++    else
++    {
++      RangeEnc_EncodeBit(&p->rc, &p->isMatch[p->state][posState], 1);
++      if (pos < LZMA_NUM_REPS)
++      {
++        RangeEnc_EncodeBit(&p->rc, &p->isRep[p->state], 1);
++        if (pos == 0)
++        {
++          RangeEnc_EncodeBit(&p->rc, &p->isRepG0[p->state], 0);
++          RangeEnc_EncodeBit(&p->rc, &p->isRep0Long[p->state][posState], ((len == 1) ? 0 : 1));
++        }
++        else
++        {
++          UInt32 distance = p->reps[pos];
++          RangeEnc_EncodeBit(&p->rc, &p->isRepG0[p->state], 1);
++          if (pos == 1)
++            RangeEnc_EncodeBit(&p->rc, &p->isRepG1[p->state], 0);
++          else
++          {
++            RangeEnc_EncodeBit(&p->rc, &p->isRepG1[p->state], 1);
++            RangeEnc_EncodeBit(&p->rc, &p->isRepG2[p->state], pos - 2);
++            if (pos == 3)
++              p->reps[3] = p->reps[2];
++            p->reps[2] = p->reps[1];
++          }
++          p->reps[1] = p->reps[0];
++          p->reps[0] = distance;
++        }
++        if (len == 1)
++          p->state = kShortRepNextStates[p->state];
++        else
++        {
++          LenEnc_Encode2(&p->repLenEnc, &p->rc, len - LZMA_MATCH_LEN_MIN, posState, !p->fastMode, p->ProbPrices);
++          p->state = kRepNextStates[p->state];
++        }
++      }
++      else
++      {
++        UInt32 posSlot;
++        RangeEnc_EncodeBit(&p->rc, &p->isRep[p->state], 0);
++        p->state = kMatchNextStates[p->state];
++        LenEnc_Encode2(&p->lenEnc, &p->rc, len - LZMA_MATCH_LEN_MIN, posState, !p->fastMode, p->ProbPrices);
++        pos -= LZMA_NUM_REPS;
++        GetPosSlot(pos, posSlot);
++        RcTree_Encode(&p->rc, p->posSlotEncoder[GetLenToPosState(len)], kNumPosSlotBits, posSlot);
++        
++        if (posSlot >= kStartPosModelIndex)
++        {
++          UInt32 footerBits = ((posSlot >> 1) - 1);
++          UInt32 base = ((2 | (posSlot & 1)) << footerBits);
++          UInt32 posReduced = pos - base;
++
++          if (posSlot < kEndPosModelIndex)
++            RcTree_ReverseEncode(&p->rc, p->posEncoders + base - posSlot - 1, footerBits, posReduced);
++          else
++          {
++            RangeEnc_EncodeDirectBits(&p->rc, posReduced >> kNumAlignBits, footerBits - kNumAlignBits);
++            RcTree_ReverseEncode(&p->rc, p->posAlignEncoder, kNumAlignBits, posReduced & kAlignMask);
++            p->alignPriceCount++;
++          }
++        }
++        p->reps[3] = p->reps[2];
++        p->reps[2] = p->reps[1];
++        p->reps[1] = p->reps[0];
++        p->reps[0] = pos;
++        p->matchPriceCount++;
++      }
++    }
++    p->additionalOffset -= len;
++    nowPos32 += len;
++    if (p->additionalOffset == 0)
++    {
++      UInt32 processed;
++      if (!p->fastMode)
++      {
++        if (p->matchPriceCount >= (1 << 7))
++          FillDistancesPrices(p);
++        if (p->alignPriceCount >= kAlignTableSize)
++          FillAlignPrices(p);
++      }
++      if (p->matchFinder.GetNumAvailableBytes(p->matchFinderObj) == 0)
++        break;
++      processed = nowPos32 - startPos32;
++      if (useLimits)
++      {
++        if (processed + kNumOpts + 300 >= maxUnpackSize ||
++            RangeEnc_GetProcessed(&p->rc) + kNumOpts * 2 >= maxPackSize)
++          break;
++      }
++      else if (processed >= (1 << 15))
++      {
++        p->nowPos64 += nowPos32 - startPos32;
++        return CheckErrors(p);
++      }
++    }
++  }
++  p->nowPos64 += nowPos32 - startPos32;
++  return Flush(p, nowPos32);
++}
++
++#define kBigHashDicLimit ((UInt32)1 << 24)
++
++static SRes LzmaEnc_Alloc(CLzmaEnc *p, UInt32 keepWindowSize, ISzAlloc *alloc, ISzAlloc *allocBig)
++{
++  UInt32 beforeSize = kNumOpts;
++  Bool btMode;
++  if (!RangeEnc_Alloc(&p->rc, alloc))
++    return SZ_ERROR_MEM;
++  btMode = (p->matchFinderBase.btMode != 0);
++  #ifndef _7ZIP_ST
++  p->mtMode = (p->multiThread && !p->fastMode && btMode);
++  #endif
++
++  {
++    unsigned lclp = p->lc + p->lp;
++    if (p->litProbs == 0 || p->saveState.litProbs == 0 || p->lclp != lclp)
++    {
++      LzmaEnc_FreeLits(p, alloc);
++      p->litProbs = (CLzmaProb *)alloc->Alloc(alloc, (0x300 << lclp) * sizeof(CLzmaProb));
++      p->saveState.litProbs = (CLzmaProb *)alloc->Alloc(alloc, (0x300 << lclp) * sizeof(CLzmaProb));
++      if (p->litProbs == 0 || p->saveState.litProbs == 0)
++      {
++        LzmaEnc_FreeLits(p, alloc);
++        return SZ_ERROR_MEM;
++      }
++      p->lclp = lclp;
++    }
++  }
++
++  p->matchFinderBase.bigHash = (p->dictSize > kBigHashDicLimit);
++
++  if (beforeSize + p->dictSize < keepWindowSize)
++    beforeSize = keepWindowSize - p->dictSize;
++
++  #ifndef _7ZIP_ST
++  if (p->mtMode)
++  {
++    RINOK(MatchFinderMt_Create(&p->matchFinderMt, p->dictSize, beforeSize, p->numFastBytes, LZMA_MATCH_LEN_MAX, allocBig));
++    p->matchFinderObj = &p->matchFinderMt;
++    MatchFinderMt_CreateVTable(&p->matchFinderMt, &p->matchFinder);
++  }
++  else
++  #endif
++  {
++    if (!MatchFinder_Create(&p->matchFinderBase, p->dictSize, beforeSize, p->numFastBytes, LZMA_MATCH_LEN_MAX, allocBig))
++      return SZ_ERROR_MEM;
++    p->matchFinderObj = &p->matchFinderBase;
++    MatchFinder_CreateVTable(&p->matchFinderBase, &p->matchFinder);
++  }
++  return SZ_OK;
++}
++
++void LzmaEnc_Init(CLzmaEnc *p)
++{
++  UInt32 i;
++  p->state = 0;
++  for (i = 0 ; i < LZMA_NUM_REPS; i++)
++    p->reps[i] = 0;
++
++  RangeEnc_Init(&p->rc);
++
++
++  for (i = 0; i < kNumStates; i++)
++  {
++    UInt32 j;
++    for (j = 0; j < LZMA_NUM_PB_STATES_MAX; j++)
++    {
++      p->isMatch[i][j] = kProbInitValue;
++      p->isRep0Long[i][j] = kProbInitValue;
++    }
++    p->isRep[i] = kProbInitValue;
++    p->isRepG0[i] = kProbInitValue;
++    p->isRepG1[i] = kProbInitValue;
++    p->isRepG2[i] = kProbInitValue;
++  }
++
++  {
++    UInt32 num = 0x300 << (p->lp + p->lc);
++    for (i = 0; i < num; i++)
++      p->litProbs[i] = kProbInitValue;
++  }
++
++  {
++    for (i = 0; i < kNumLenToPosStates; i++)
++    {
++      CLzmaProb *probs = p->posSlotEncoder[i];
++      UInt32 j;
++      for (j = 0; j < (1 << kNumPosSlotBits); j++)
++        probs[j] = kProbInitValue;
++    }
++  }
++  {
++    for (i = 0; i < kNumFullDistances - kEndPosModelIndex; i++)
++      p->posEncoders[i] = kProbInitValue;
++  }
++
++  LenEnc_Init(&p->lenEnc.p);
++  LenEnc_Init(&p->repLenEnc.p);
++
++  for (i = 0; i < (1 << kNumAlignBits); i++)
++    p->posAlignEncoder[i] = kProbInitValue;
++
++  p->optimumEndIndex = 0;
++  p->optimumCurrentIndex = 0;
++  p->additionalOffset = 0;
++
++  p->pbMask = (1 << p->pb) - 1;
++  p->lpMask = (1 << p->lp) - 1;
++}
++
++void LzmaEnc_InitPrices(CLzmaEnc *p)
++{
++  if (!p->fastMode)
++  {
++    FillDistancesPrices(p);
++    FillAlignPrices(p);
++  }
++
++  p->lenEnc.tableSize =
++  p->repLenEnc.tableSize =
++      p->numFastBytes + 1 - LZMA_MATCH_LEN_MIN;
++  LenPriceEnc_UpdateTables(&p->lenEnc, 1 << p->pb, p->ProbPrices);
++  LenPriceEnc_UpdateTables(&p->repLenEnc, 1 << p->pb, p->ProbPrices);
++}
++
++static SRes LzmaEnc_AllocAndInit(CLzmaEnc *p, UInt32 keepWindowSize, ISzAlloc *alloc, ISzAlloc *allocBig)
++{
++  UInt32 i;
++  for (i = 0; i < (UInt32)kDicLogSizeMaxCompress; i++)
++    if (p->dictSize <= ((UInt32)1 << i))
++      break;
++  p->distTableSize = i * 2;
++
++  p->finished = False;
++  p->result = SZ_OK;
++  RINOK(LzmaEnc_Alloc(p, keepWindowSize, alloc, allocBig));
++  LzmaEnc_Init(p);
++  LzmaEnc_InitPrices(p);
++  p->nowPos64 = 0;
++  return SZ_OK;
++}
++
++static SRes LzmaEnc_Prepare(CLzmaEncHandle pp, ISeqOutStream *outStream, ISeqInStream *inStream,
++    ISzAlloc *alloc, ISzAlloc *allocBig)
++{
++  CLzmaEnc *p = (CLzmaEnc *)pp;
++  p->matchFinderBase.stream = inStream;
++  p->needInit = 1;
++  p->rc.outStream = outStream;
++  return LzmaEnc_AllocAndInit(p, 0, alloc, allocBig);
++}
++
++SRes LzmaEnc_PrepareForLzma2(CLzmaEncHandle pp,
++    ISeqInStream *inStream, UInt32 keepWindowSize,
++    ISzAlloc *alloc, ISzAlloc *allocBig)
++{
++  CLzmaEnc *p = (CLzmaEnc *)pp;
++  p->matchFinderBase.stream = inStream;
++  p->needInit = 1;
++  return LzmaEnc_AllocAndInit(p, keepWindowSize, alloc, allocBig);
++}
++
++static void LzmaEnc_SetInputBuf(CLzmaEnc *p, const Byte *src, SizeT srcLen)
++{
++  p->matchFinderBase.directInput = 1;
++  p->matchFinderBase.bufferBase = (Byte *)src;
++  p->matchFinderBase.directInputRem = srcLen;
++}
++
++SRes LzmaEnc_MemPrepare(CLzmaEncHandle pp, const Byte *src, SizeT srcLen,
++    UInt32 keepWindowSize, ISzAlloc *alloc, ISzAlloc *allocBig)
++{
++  CLzmaEnc *p = (CLzmaEnc *)pp;
++  LzmaEnc_SetInputBuf(p, src, srcLen);
++  p->needInit = 1;
++
++  return LzmaEnc_AllocAndInit(p, keepWindowSize, alloc, allocBig);
++}
++
++void LzmaEnc_Finish(CLzmaEncHandle pp)
++{
++  #ifndef _7ZIP_ST
++  CLzmaEnc *p = (CLzmaEnc *)pp;
++  if (p->mtMode)
++    MatchFinderMt_ReleaseStream(&p->matchFinderMt);
++  #else
++  pp = pp;
++  #endif
++}
++
++typedef struct
++{
++  ISeqOutStream funcTable;
++  Byte *data;
++  SizeT rem;
++  Bool overflow;
++} CSeqOutStreamBuf;
++
++static size_t MyWrite(void *pp, const void *data, size_t size)
++{
++  CSeqOutStreamBuf *p = (CSeqOutStreamBuf *)pp;
++  if (p->rem < size)
++  {
++    size = p->rem;
++    p->overflow = True;
++  }
++  memcpy(p->data, data, size);
++  p->rem -= size;
++  p->data += size;
++  return size;
++}
++
++
++UInt32 LzmaEnc_GetNumAvailableBytes(CLzmaEncHandle pp)
++{
++  const CLzmaEnc *p = (CLzmaEnc *)pp;
++  return p->matchFinder.GetNumAvailableBytes(p->matchFinderObj);
++}
++
++const Byte *LzmaEnc_GetCurBuf(CLzmaEncHandle pp)
++{
++  const CLzmaEnc *p = (CLzmaEnc *)pp;
++  return p->matchFinder.GetPointerToCurrentPos(p->matchFinderObj) - p->additionalOffset;
++}
++
++SRes LzmaEnc_CodeOneMemBlock(CLzmaEncHandle pp, Bool reInit,
++    Byte *dest, size_t *destLen, UInt32 desiredPackSize, UInt32 *unpackSize)
++{
++  CLzmaEnc *p = (CLzmaEnc *)pp;
++  UInt64 nowPos64;
++  SRes res;
++  CSeqOutStreamBuf outStream;
++
++  outStream.funcTable.Write = MyWrite;
++  outStream.data = dest;
++  outStream.rem = *destLen;
++  outStream.overflow = False;
++
++  p->writeEndMark = False;
++  p->finished = False;
++  p->result = SZ_OK;
++
++  if (reInit)
++    LzmaEnc_Init(p);
++  LzmaEnc_InitPrices(p);
++  nowPos64 = p->nowPos64;
++  RangeEnc_Init(&p->rc);
++  p->rc.outStream = &outStream.funcTable;
++
++  res = LzmaEnc_CodeOneBlock(p, True, desiredPackSize, *unpackSize);
++  
++  *unpackSize = (UInt32)(p->nowPos64 - nowPos64);
++  *destLen -= outStream.rem;
++  if (outStream.overflow)
++    return SZ_ERROR_OUTPUT_EOF;
++
++  return res;
++}
++
++static SRes LzmaEnc_Encode2(CLzmaEnc *p, ICompressProgress *progress)
++{
++  SRes res = SZ_OK;
++
++  #ifndef _7ZIP_ST
++  Byte allocaDummy[0x300];
++  int i = 0;
++  for (i = 0; i < 16; i++)
++    allocaDummy[i] = (Byte)i;
++  #endif
++
++  for (;;)
++  {
++    res = LzmaEnc_CodeOneBlock(p, False, 0, 0);
++    if (res != SZ_OK || p->finished != 0)
++      break;
++    if (progress != 0)
++    {
++      res = progress->Progress(progress, p->nowPos64, RangeEnc_GetProcessed(&p->rc));
++      if (res != SZ_OK)
++      {
++        res = SZ_ERROR_PROGRESS;
++        break;
++      }
++    }
++  }
++  LzmaEnc_Finish(p);
++  return res;
++}
++
++SRes LzmaEnc_Encode(CLzmaEncHandle pp, ISeqOutStream *outStream, ISeqInStream *inStream, ICompressProgress *progress,
++    ISzAlloc *alloc, ISzAlloc *allocBig)
++{
++  RINOK(LzmaEnc_Prepare(pp, outStream, inStream, alloc, allocBig));
++  return LzmaEnc_Encode2((CLzmaEnc *)pp, progress);
++}
++
++SRes LzmaEnc_WriteProperties(CLzmaEncHandle pp, Byte *props, SizeT *size)
++{
++  CLzmaEnc *p = (CLzmaEnc *)pp;
++  int i;
++  UInt32 dictSize = p->dictSize;
++  if (*size < LZMA_PROPS_SIZE)
++    return SZ_ERROR_PARAM;
++  *size = LZMA_PROPS_SIZE;
++  props[0] = (Byte)((p->pb * 5 + p->lp) * 9 + p->lc);
++
++  for (i = 11; i <= 30; i++)
++  {
++    if (dictSize <= ((UInt32)2 << i))
++    {
++      dictSize = (2 << i);
++      break;
++    }
++    if (dictSize <= ((UInt32)3 << i))
++    {
++      dictSize = (3 << i);
++      break;
++    }
++  }
++
++  for (i = 0; i < 4; i++)
++    props[1 + i] = (Byte)(dictSize >> (8 * i));
++  return SZ_OK;
++}
++
++SRes LzmaEnc_MemEncode(CLzmaEncHandle pp, Byte *dest, SizeT *destLen, const Byte *src, SizeT srcLen,
++    int writeEndMark, ICompressProgress *progress, ISzAlloc *alloc, ISzAlloc *allocBig)
++{
++  SRes res;
++  CLzmaEnc *p = (CLzmaEnc *)pp;
++
++  CSeqOutStreamBuf outStream;
++
++  LzmaEnc_SetInputBuf(p, src, srcLen);
++
++  outStream.funcTable.Write = MyWrite;
++  outStream.data = dest;
++  outStream.rem = *destLen;
++  outStream.overflow = False;
++
++  p->writeEndMark = writeEndMark;
++
++  p->rc.outStream = &outStream.funcTable;
++  res = LzmaEnc_MemPrepare(pp, src, srcLen, 0, alloc, allocBig);
++  if (res == SZ_OK)
++    res = LzmaEnc_Encode2(p, progress);
++
++  *destLen -= outStream.rem;
++  if (outStream.overflow)
++    return SZ_ERROR_OUTPUT_EOF;
++  return res;
++}
++
++SRes LzmaEncode(Byte *dest, SizeT *destLen, const Byte *src, SizeT srcLen,
++    const CLzmaEncProps *props, Byte *propsEncoded, SizeT *propsSize, int writeEndMark,
++    ICompressProgress *progress, ISzAlloc *alloc, ISzAlloc *allocBig)
++{
++  CLzmaEnc *p = (CLzmaEnc *)LzmaEnc_Create(alloc);
++  SRes res;
++  if (p == 0)
++    return SZ_ERROR_MEM;
++
++  res = LzmaEnc_SetProps(p, props);
++  if (res == SZ_OK)
++  {
++    res = LzmaEnc_WriteProperties(p, propsEncoded, propsSize);
++    if (res == SZ_OK)
++      res = LzmaEnc_MemEncode(p, dest, destLen, src, srcLen,
++          writeEndMark, progress, alloc, allocBig);
++  }
++
++  LzmaEnc_Destroy(p, alloc, allocBig);
++  return res;
++}
+--- /dev/null
++++ b/lib/lzma/Makefile
+@@ -0,0 +1,7 @@
++lzma_compress-objs := LzFind.o LzmaEnc.o
++lzma_decompress-objs := LzmaDec.o
++
++obj-$(CONFIG_LZMA_COMPRESS) += lzma_compress.o
++obj-$(CONFIG_LZMA_DECOMPRESS) += lzma_decompress.o
++
++EXTRA_CFLAGS += -Iinclude/linux -Iinclude/linux/lzma -include types.h
diff --git a/target/linux/generic/pending-5.4/532-jffs2_eofdetect.patch b/target/linux/generic/pending-5.4/532-jffs2_eofdetect.patch
new file mode 100644
index 0000000000..e9952c6d84
--- /dev/null
+++ b/target/linux/generic/pending-5.4/532-jffs2_eofdetect.patch
@@ -0,0 +1,65 @@
+From: Felix Fietkau <nbd@nbd.name>
+Subject: fs: jffs2: EOF marker
+
+Signed-off-by: Felix Fietkau <nbd@nbd.name>
+---
+ fs/jffs2/build.c | 10 ++++++++++
+ fs/jffs2/scan.c  | 21 +++++++++++++++++++--
+ 2 files changed, 29 insertions(+), 2 deletions(-)
+
+--- a/fs/jffs2/build.c
++++ b/fs/jffs2/build.c
+@@ -117,6 +117,16 @@ static int jffs2_build_filesystem(struct
+ 	dbg_fsbuild("scanned flash completely\n");
+ 	jffs2_dbg_dump_block_lists_nolock(c);
+ 
++	if (c->flags & (1 << 7)) {
++		printk("%s(): unlocking the mtd device... ", __func__);
++		mtd_unlock(c->mtd, 0, c->mtd->size);
++		printk("done.\n");
++
++		printk("%s(): erasing all blocks after the end marker... ", __func__);
++		jffs2_erase_pending_blocks(c, -1);
++		printk("done.\n");
++	}
++
+ 	dbg_fsbuild("pass 1 starting\n");
+ 	c->flags |= JFFS2_SB_FLAG_BUILDING;
+ 	/* Now scan the directory tree, increasing nlink according to every dirent found. */
+--- a/fs/jffs2/scan.c
++++ b/fs/jffs2/scan.c
+@@ -148,8 +148,14 @@ int jffs2_scan_medium(struct jffs2_sb_in
+ 		/* reset summary info for next eraseblock scan */
+ 		jffs2_sum_reset_collected(s);
+ 
+-		ret = jffs2_scan_eraseblock(c, jeb, buf_size?flashbuf:(flashbuf+jeb->offset),
+-						buf_size, s);
++		if (c->flags & (1 << 7)) {
++			if (mtd_block_isbad(c->mtd, jeb->offset))
++				ret = BLK_STATE_BADBLOCK;
++			else
++				ret = BLK_STATE_ALLFF;
++		} else
++			ret = jffs2_scan_eraseblock(c, jeb, buf_size?flashbuf:(flashbuf+jeb->offset),
++							buf_size, s);
+ 
+ 		if (ret < 0)
+ 			goto out;
+@@ -561,6 +567,17 @@ full_scan:
+ 			return err;
+ 	}
+ 
++	if ((buf[0] == 0xde) &&
++		(buf[1] == 0xad) &&
++		(buf[2] == 0xc0) &&
++		(buf[3] == 0xde)) {
++		/* end of filesystem. erase everything after this point */
++		printk("%s(): End of filesystem marker found at 0x%x\n", __func__, jeb->offset);
++		c->flags |= (1 << 7);
++
++		return BLK_STATE_ALLFF;
++	}
++
+ 	/* We temporarily use 'ofs' as a pointer into the buffer/jeb */
+ 	ofs = 0;
+ 	max_ofs = EMPTY_SCAN_SIZE(c->sector_size);
diff --git a/target/linux/generic/pending-5.4/553-ubifs-Add-option-to-create-UBI-FS-version-4-on-empty.patch b/target/linux/generic/pending-5.4/553-ubifs-Add-option-to-create-UBI-FS-version-4-on-empty.patch
new file mode 100644
index 0000000000..02c9b4c0fa
--- /dev/null
+++ b/target/linux/generic/pending-5.4/553-ubifs-Add-option-to-create-UBI-FS-version-4-on-empty.patch
@@ -0,0 +1,63 @@
+From 93c33e6a7f3b0aef99d02252e6232a3d8b80f2d5 Mon Sep 17 00:00:00 2001
+From: Hauke Mehrtens <hauke@hauke-m.de>
+Date: Sun, 21 Jan 2018 15:47:50 +0100
+Subject: ubifs: Add option to create UBI FS version 4 on empty UBI volume
+
+Instead of creating an ubifs file system with format version 5 by
+default on empty UBI volumes add a compile option to create an older ubi
+with file system format version 4 instated. This allows it to be mount
+as a volume on kernel versions < 4.10, which does not support format
+version 5.
+We saw that some people can not access their older data when they
+downgraded from kernel 4.14 to kernel 4.9 to prevent this this option
+would help.
+
+Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
+---
+ fs/ubifs/Kconfig | 13 +++++++++++++
+ fs/ubifs/sb.c    |  6 ++++++
+ 2 files changed, 19 insertions(+)
+
+--- a/fs/ubifs/Kconfig
++++ b/fs/ubifs/Kconfig
+@@ -85,3 +85,16 @@ config UBIFS_FS_SECURITY
+ 	  the extended attribute support in advance.
+ 
+ 	  If you are not using a security module, say N.
++
++config UBIFS_FS_FORMAT4
++	bool "Use file system format version 4 for new file systems"
++	depends on UBIFS_FS
++	help
++	  Instead of creating new file systems with the new ubifs file
++	  system version 5, use the old format version 4 for implicitly
++	  by the driver created file systems on an empty UBI volume. This
++	  makes it possible to  mount these file systems also with kernel
++	  versions before 4.10. The driver will still support file system
++	  format version 5 for ubifs file systems created with version 5.
++
++	  If you are unsure, say N.
+--- a/fs/ubifs/sb.c
++++ b/fs/ubifs/sb.c
+@@ -176,7 +176,9 @@ static int create_default_filesystem(str
+ 	tmp64 = (long long)max_buds * c->leb_size;
+ 	if (big_lpt)
+ 		sup_flags |= UBIFS_FLG_BIGLPT;
++#ifndef CONFIG_UBIFS_FS_FORMAT4
+ 	sup_flags |= UBIFS_FLG_DOUBLE_HASH;
++#endif
+ 
+ 	sup->ch.node_type  = UBIFS_SB_NODE;
+ 	sup->key_hash      = UBIFS_KEY_HASH_R5;
+@@ -192,7 +194,11 @@ static int create_default_filesystem(str
+ 	sup->jhead_cnt     = cpu_to_le32(DEFAULT_JHEADS_CNT);
+ 	sup->fanout        = cpu_to_le32(DEFAULT_FANOUT);
+ 	sup->lsave_cnt     = cpu_to_le32(c->lsave_cnt);
++#ifdef CONFIG_UBIFS_FS_FORMAT4
++	sup->fmt_version   = cpu_to_le32(4);
++#else
+ 	sup->fmt_version   = cpu_to_le32(UBIFS_FORMAT_VERSION);
++#endif
+ 	sup->time_gran     = cpu_to_le32(DEFAULT_TIME_GRAN);
+ 	if (c->mount_opts.override_compr)
+ 		sup->default_compr = cpu_to_le16(c->mount_opts.compr_type);
diff --git a/target/linux/generic/pending-5.4/600-netfilter_conntrack_flush.patch b/target/linux/generic/pending-5.4/600-netfilter_conntrack_flush.patch
new file mode 100644
index 0000000000..fa32f88e17
--- /dev/null
+++ b/target/linux/generic/pending-5.4/600-netfilter_conntrack_flush.patch
@@ -0,0 +1,88 @@
+From: Felix Fietkau <nbd@nbd.name>
+Subject: netfilter: add support for flushing conntrack via /proc
+
+lede-commit 8193bbe59a74d34d6a26d4a8cb857b1952905314
+Signed-off-by: Felix Fietkau <nbd@nbd.name>
+---
+ net/netfilter/nf_conntrack_standalone.c | 59 ++++++++++++++++++++++++++++++++-
+ 1 file changed, 58 insertions(+), 1 deletion(-)
+
+--- a/net/netfilter/nf_conntrack_standalone.c
++++ b/net/netfilter/nf_conntrack_standalone.c
+@@ -9,6 +9,7 @@
+ #include <linux/percpu.h>
+ #include <linux/netdevice.h>
+ #include <linux/security.h>
++#include <linux/inet.h>
+ #include <net/net_namespace.h>
+ #ifdef CONFIG_SYSCTL
+ #include <linux/sysctl.h>
+@@ -433,6 +434,56 @@ static int ct_cpu_seq_show(struct seq_fi
+ 	return 0;
+ }
+ 
++struct kill_request {
++	u16 family;
++	union nf_inet_addr addr;
++};
++
++static int kill_matching(struct nf_conn *i, void *data)
++{
++	struct kill_request *kr = data;
++	struct nf_conntrack_tuple *t1 = &i->tuplehash[IP_CT_DIR_ORIGINAL].tuple;
++	struct nf_conntrack_tuple *t2 = &i->tuplehash[IP_CT_DIR_REPLY].tuple;
++
++	if (!kr->family)
++		return 1;
++
++	if (t1->src.l3num != kr->family)
++		return 0;
++
++	return (nf_inet_addr_cmp(&kr->addr, &t1->src.u3) ||
++	        nf_inet_addr_cmp(&kr->addr, &t1->dst.u3) ||
++	        nf_inet_addr_cmp(&kr->addr, &t2->src.u3) ||
++	        nf_inet_addr_cmp(&kr->addr, &t2->dst.u3));
++}
++
++static int ct_file_write(struct file *file, char *buf, size_t count)
++{
++	struct seq_file *seq = file->private_data;
++	struct net *net = seq_file_net(seq);
++	struct kill_request kr = { };
++
++	if (count == 0)
++		return 0;
++
++	if (count >= INET6_ADDRSTRLEN)
++		count = INET6_ADDRSTRLEN - 1;
++
++	if (strnchr(buf, count, ':')) {
++		kr.family = AF_INET6;
++		if (!in6_pton(buf, count, (void *)&kr.addr, '\n', NULL))
++			return -EINVAL;
++	} else if (strnchr(buf, count, '.')) {
++		kr.family = AF_INET;
++		if (!in4_pton(buf, count, (void *)&kr.addr, '\n', NULL))
++			return -EINVAL;
++	}
++
++	nf_ct_iterate_cleanup_net(net, kill_matching, &kr, 0, 0);
++
++	return 0;
++}
++
+ static const struct seq_operations ct_cpu_seq_ops = {
+ 	.start	= ct_cpu_seq_start,
+ 	.next	= ct_cpu_seq_next,
+@@ -446,8 +497,9 @@ static int nf_conntrack_standalone_init_
+ 	kuid_t root_uid;
+ 	kgid_t root_gid;
+ 
+-	pde = proc_create_net("nf_conntrack", 0440, net->proc_net, &ct_seq_ops,
+-			sizeof(struct ct_iter_state));
++	pde = proc_create_net_data_write("nf_conntrack", 0440, net->proc_net,
++					 &ct_seq_ops, &ct_file_write,
++					 sizeof(struct ct_iter_state), NULL);
+ 	if (!pde)
+ 		goto out_nf_conntrack;
+ 
diff --git a/target/linux/generic/pending-5.4/610-netfilter_match_bypass_default_checks.patch b/target/linux/generic/pending-5.4/610-netfilter_match_bypass_default_checks.patch
new file mode 100644
index 0000000000..1691146825
--- /dev/null
+++ b/target/linux/generic/pending-5.4/610-netfilter_match_bypass_default_checks.patch
@@ -0,0 +1,110 @@
+From: Felix Fietkau <nbd@nbd.name>
+Subject: kernel: add a new version of my netfilter speedup patches for linux 2.6.39 and 3.0
+
+Signed-off-by: Felix Fietkau <nbd@nbd.name>
+---
+ include/uapi/linux/netfilter_ipv4/ip_tables.h |  1 +
+ net/ipv4/netfilter/ip_tables.c                | 37 +++++++++++++++++++++++++++
+ 2 files changed, 38 insertions(+)
+
+--- a/include/uapi/linux/netfilter_ipv4/ip_tables.h
++++ b/include/uapi/linux/netfilter_ipv4/ip_tables.h
+@@ -89,6 +89,7 @@ struct ipt_ip {
+ #define IPT_F_FRAG		0x01	/* Set if rule is a fragment rule */
+ #define IPT_F_GOTO		0x02	/* Set if jump is a goto */
+ #define IPT_F_MASK		0x03	/* All possible flag bits mask. */
++#define IPT_F_NO_DEF_MATCH	0x80	/* Internal: no default match rules present */
+ 
+ /* Values for "inv" field in struct ipt_ip. */
+ #define IPT_INV_VIA_IN		0x01	/* Invert the sense of IN IFACE. */
+--- a/net/ipv4/netfilter/ip_tables.c
++++ b/net/ipv4/netfilter/ip_tables.c
+@@ -53,6 +53,9 @@ ip_packet_match(const struct iphdr *ip,
+ {
+ 	unsigned long ret;
+ 
++	if (ipinfo->flags & IPT_F_NO_DEF_MATCH)
++		return true;
++
+ 	if (NF_INVF(ipinfo, IPT_INV_SRCIP,
+ 		    (ip->saddr & ipinfo->smsk.s_addr) != ipinfo->src.s_addr) ||
+ 	    NF_INVF(ipinfo, IPT_INV_DSTIP,
+@@ -83,6 +86,29 @@ ip_packet_match(const struct iphdr *ip,
+ 	return true;
+ }
+ 
++static void
++ip_checkdefault(struct ipt_ip *ip)
++{
++	static const char iface_mask[IFNAMSIZ] = {};
++
++	if (ip->invflags || ip->flags & IPT_F_FRAG)
++		return;
++
++	if (memcmp(ip->iniface_mask, iface_mask, IFNAMSIZ) != 0)
++		return;
++
++	if (memcmp(ip->outiface_mask, iface_mask, IFNAMSIZ) != 0)
++		return;
++
++	if (ip->smsk.s_addr || ip->dmsk.s_addr)
++		return;
++
++	if (ip->proto)
++		return;
++
++	ip->flags |= IPT_F_NO_DEF_MATCH;
++}
++
+ static bool
+ ip_checkentry(const struct ipt_ip *ip)
+ {
+@@ -527,6 +553,8 @@ find_check_entry(struct ipt_entry *e, st
+ 	struct xt_mtchk_param mtpar;
+ 	struct xt_entry_match *ematch;
+ 
++	ip_checkdefault(&e->ip);
++
+ 	if (!xt_percpu_counter_alloc(alloc_state, &e->counters))
+ 		return -ENOMEM;
+ 
+@@ -821,6 +849,7 @@ copy_entries_to_user(unsigned int total_
+ 	const struct xt_table_info *private = table->private;
+ 	int ret = 0;
+ 	const void *loc_cpu_entry;
++	u8 flags;
+ 
+ 	counters = alloc_counters(table);
+ 	if (IS_ERR(counters))
+@@ -848,6 +877,14 @@ copy_entries_to_user(unsigned int total_
+ 			goto free_counters;
+ 		}
+ 
++		flags = e->ip.flags & IPT_F_MASK;
++		if (copy_to_user(userptr + off
++				 + offsetof(struct ipt_entry, ip.flags),
++				 &flags, sizeof(flags)) != 0) {
++			ret = -EFAULT;
++			goto free_counters;
++		}
++
+ 		for (i = sizeof(struct ipt_entry);
+ 		     i < e->target_offset;
+ 		     i += m->u.match_size) {
+@@ -1228,12 +1265,15 @@ compat_copy_entry_to_user(struct ipt_ent
+ 	compat_uint_t origsize;
+ 	const struct xt_entry_match *ematch;
+ 	int ret = 0;
++	u8 flags = e->ip.flags & IPT_F_MASK;
+ 
+ 	origsize = *size;
+ 	ce = *dstptr;
+ 	if (copy_to_user(ce, e, sizeof(struct ipt_entry)) != 0 ||
+ 	    copy_to_user(&ce->counters, &counters[i],
+-	    sizeof(counters[i])) != 0)
++	    sizeof(counters[i])) != 0 ||
++	    copy_to_user(&ce->ip.flags, &flags,
++	    sizeof(flags)) != 0)
+ 		return -EFAULT;
+ 
+ 	*dstptr += sizeof(struct compat_ipt_entry);
diff --git a/target/linux/generic/pending-5.4/611-netfilter_match_bypass_default_table.patch b/target/linux/generic/pending-5.4/611-netfilter_match_bypass_default_table.patch
new file mode 100644
index 0000000000..ba976b0751
--- /dev/null
+++ b/target/linux/generic/pending-5.4/611-netfilter_match_bypass_default_table.patch
@@ -0,0 +1,106 @@
+From: Felix Fietkau <nbd@nbd.name>
+Subject: netfilter: match bypass default table
+
+Signed-off-by: Felix Fietkau <nbd@nbd.name>
+---
+ net/ipv4/netfilter/ip_tables.c | 79 +++++++++++++++++++++++++++++++-----------
+ 1 file changed, 58 insertions(+), 21 deletions(-)
+
+--- a/net/ipv4/netfilter/ip_tables.c
++++ b/net/ipv4/netfilter/ip_tables.c
+@@ -249,6 +249,33 @@ struct ipt_entry *ipt_next_entry(const s
+ 	return (void *)entry + entry->next_offset;
+ }
+ 
++static bool
++ipt_handle_default_rule(struct ipt_entry *e, unsigned int *verdict)
++{
++	struct xt_entry_target *t;
++	struct xt_standard_target *st;
++
++	if (e->target_offset != sizeof(struct ipt_entry))
++		return false;
++
++	if (!(e->ip.flags & IPT_F_NO_DEF_MATCH))
++		return false;
++
++	t = ipt_get_target(e);
++	if (t->u.kernel.target->target)
++		return false;
++
++	st = (struct xt_standard_target *) t;
++	if (st->verdict == XT_RETURN)
++		return false;
++
++	if (st->verdict >= 0)
++		return false;
++
++	*verdict = (unsigned)(-st->verdict) - 1;
++	return true;
++}
++
+ /* Returns one of the generic firewall policies, like NF_ACCEPT. */
+ unsigned int
+ ipt_do_table(struct sk_buff *skb,
+@@ -269,27 +296,28 @@ ipt_do_table(struct sk_buff *skb,
+ 	unsigned int addend;
+ 
+ 	/* Initialization */
++	WARN_ON(!(table->valid_hooks & (1 << hook)));
++	local_bh_disable();
++	private = READ_ONCE(table->private); /* Address dependency. */
++	cpu        = smp_processor_id();
++	table_base = private->entries;
++
++	e = get_entry(table_base, private->hook_entry[hook]);
++	if (ipt_handle_default_rule(e, &verdict)) {
++		struct xt_counters *counter;
++
++		counter = xt_get_this_cpu_counter(&e->counters);
++		ADD_COUNTER(*counter, skb->len, 1);
++		local_bh_enable();
++		return verdict;
++	}
++
+ 	stackidx = 0;
+ 	ip = ip_hdr(skb);
+ 	indev = state->in ? state->in->name : nulldevname;
+ 	outdev = state->out ? state->out->name : nulldevname;
+-	/* We handle fragments by dealing with the first fragment as
+-	 * if it was a normal packet.  All other fragments are treated
+-	 * normally, except that they will NEVER match rules that ask
+-	 * things we don't know, ie. tcp syn flag or ports).  If the
+-	 * rule is also a fragment-specific rule, non-fragments won't
+-	 * match it. */
+-	acpar.fragoff = ntohs(ip->frag_off) & IP_OFFSET;
+-	acpar.thoff   = ip_hdrlen(skb);
+-	acpar.hotdrop = false;
+-	acpar.state   = state;
+ 
+-	WARN_ON(!(table->valid_hooks & (1 << hook)));
+-	local_bh_disable();
+ 	addend = xt_write_recseq_begin();
+-	private = READ_ONCE(table->private); /* Address dependency. */
+-	cpu        = smp_processor_id();
+-	table_base = private->entries;
+ 	jumpstack  = (struct ipt_entry **)private->jumpstack[cpu];
+ 
+ 	/* Switch to alternate jumpstack if we're being invoked via TEE.
+@@ -302,7 +330,16 @@ ipt_do_table(struct sk_buff *skb,
+ 	if (static_key_false(&xt_tee_enabled))
+ 		jumpstack += private->stacksize * __this_cpu_read(nf_skb_duplicated);
+ 
+-	e = get_entry(table_base, private->hook_entry[hook]);
++	/* We handle fragments by dealing with the first fragment as
++	 * if it was a normal packet.  All other fragments are treated
++	 * normally, except that they will NEVER match rules that ask
++	 * things we don't know, ie. tcp syn flag or ports).  If the
++	 * rule is also a fragment-specific rule, non-fragments won't
++	 * match it. */
++	acpar.fragoff = ntohs(ip->frag_off) & IP_OFFSET;
++	acpar.thoff   = ip_hdrlen(skb);
++	acpar.hotdrop = false;
++	acpar.state   = state;
+ 
+ 	do {
+ 		const struct xt_entry_target *t;
diff --git a/target/linux/generic/pending-5.4/612-netfilter_match_reduce_memory_access.patch b/target/linux/generic/pending-5.4/612-netfilter_match_reduce_memory_access.patch
new file mode 100644
index 0000000000..cd6fcf8e74
--- /dev/null
+++ b/target/linux/generic/pending-5.4/612-netfilter_match_reduce_memory_access.patch
@@ -0,0 +1,22 @@
+From: Felix Fietkau <nbd@nbd.name>
+Subject: netfilter: reduce match memory access
+
+Signed-off-by: Felix Fietkau <nbd@nbd.name>
+---
+ net/ipv4/netfilter/ip_tables.c | 4 ++--
+ 1 file changed, 2 insertions(+), 2 deletions(-)
+
+--- a/net/ipv4/netfilter/ip_tables.c
++++ b/net/ipv4/netfilter/ip_tables.c
+@@ -56,9 +56,9 @@ ip_packet_match(const struct iphdr *ip,
+ 	if (ipinfo->flags & IPT_F_NO_DEF_MATCH)
+ 		return true;
+ 
+-	if (NF_INVF(ipinfo, IPT_INV_SRCIP,
++	if (NF_INVF(ipinfo, IPT_INV_SRCIP, ipinfo->smsk.s_addr &&
+ 		    (ip->saddr & ipinfo->smsk.s_addr) != ipinfo->src.s_addr) ||
+-	    NF_INVF(ipinfo, IPT_INV_DSTIP,
++	    NF_INVF(ipinfo, IPT_INV_DSTIP, ipinfo->dmsk.s_addr &&
+ 		    (ip->daddr & ipinfo->dmsk.s_addr) != ipinfo->dst.s_addr))
+ 		return false;
+ 
diff --git a/target/linux/generic/pending-5.4/613-netfilter_optional_tcp_window_check.patch b/target/linux/generic/pending-5.4/613-netfilter_optional_tcp_window_check.patch
new file mode 100644
index 0000000000..634218dfc3
--- /dev/null
+++ b/target/linux/generic/pending-5.4/613-netfilter_optional_tcp_window_check.patch
@@ -0,0 +1,53 @@
+From: Felix Fietkau <nbd@nbd.name>
+Subject: netfilter: optional tcp window check
+
+Signed-off-by: Felix Fietkau <nbd@nbd.name>
+---
+ net/netfilter/nf_conntrack_proto_tcp.c | 13 +++++++++++++
+ 1 file changed, 13 insertions(+)
+
+--- a/net/netfilter/nf_conntrack_proto_tcp.c
++++ b/net/netfilter/nf_conntrack_proto_tcp.c
+@@ -34,6 +34,9 @@
+ #include <net/netfilter/ipv4/nf_conntrack_ipv4.h>
+ #include <net/netfilter/ipv6/nf_conntrack_ipv6.h>
+ 
++/* Do not check the TCP window for incoming packets  */
++static int nf_ct_tcp_no_window_check __read_mostly = 1;
++
+ /* "Be conservative in what you do,
+     be liberal in what you accept from others."
+     If it's non-zero, we mark only out of window RST segments as INVALID. */
+@@ -484,6 +487,9 @@ static bool tcp_in_window(const struct n
+ 	s32 receiver_offset;
+ 	bool res, in_recv_win;
+ 
++	if (nf_ct_tcp_no_window_check)
++		return true;
++
+ 	/*
+ 	 * Get the required data from the packet.
+ 	 */
+@@ -1059,7 +1065,7 @@ static int tcp_packet(struct nf_conn *ct
+ 		 IP_CT_TCP_FLAG_DATA_UNACKNOWLEDGED &&
+ 		 timeouts[new_state] > timeouts[TCP_CONNTRACK_UNACK])
+ 		timeout = timeouts[TCP_CONNTRACK_UNACK];
+-	else if (ct->proto.tcp.last_win == 0 &&
++	else if (!nf_ct_tcp_no_window_check && ct->proto.tcp.last_win == 0 &&
+ 		 timeouts[new_state] > timeouts[TCP_CONNTRACK_RETRANS])
+ 		timeout = timeouts[TCP_CONNTRACK_RETRANS];
+ 	else
+@@ -1508,6 +1514,13 @@ static struct ctl_table tcp_sysctl_table
+ 		.mode		= 0644,
+ 		.proc_handler	= proc_dointvec,
+ 	},
++	{
++		.procname       = "nf_conntrack_tcp_no_window_check",
++		.data           = &nf_ct_tcp_no_window_check,
++		.maxlen         = sizeof(unsigned int),
++		.mode           = 0644,
++		.proc_handler   = proc_dointvec,
++	},
+ 	{ }
+ };
+ #endif /* CONFIG_SYSCTL */
diff --git a/target/linux/generic/pending-5.4/616-net_optimize_xfrm_calls.patch b/target/linux/generic/pending-5.4/616-net_optimize_xfrm_calls.patch
new file mode 100644
index 0000000000..6a5801027c
--- /dev/null
+++ b/target/linux/generic/pending-5.4/616-net_optimize_xfrm_calls.patch
@@ -0,0 +1,20 @@
+From: Felix Fietkau <nbd@nbd.name>
+Subject: kernel: add a small xfrm related performance optimization
+
+Signed-off-by: Felix Fietkau <nbd@nbd.name>
+---
+ net/netfilter/nf_nat_core.c | 3 +++
+ 1 file changed, 3 insertions(+)
+
+--- a/net/netfilter/nf_nat_core.c
++++ b/net/netfilter/nf_nat_core.c
+@@ -110,6 +110,9 @@ int nf_xfrm_me_harder(struct net *net, s
+ 	struct sock *sk = skb->sk;
+ 	int err;
+ 
++	if (skb->dev && !dev_net(skb->dev)->xfrm.policy_count[XFRM_POLICY_OUT])
++		return 0;
++
+ 	err = xfrm_decode_session(skb, &fl, family);
+ 	if (err < 0)
+ 		return err;
diff --git a/target/linux/generic/pending-5.4/620-net_sched-codel-do-not-defer-queue-length-update.patch b/target/linux/generic/pending-5.4/620-net_sched-codel-do-not-defer-queue-length-update.patch
new file mode 100644
index 0000000000..457c812841
--- /dev/null
+++ b/target/linux/generic/pending-5.4/620-net_sched-codel-do-not-defer-queue-length-update.patch
@@ -0,0 +1,86 @@
+From: Konstantin Khlebnikov <khlebnikov@yandex-team.ru>
+Date: Mon, 21 Aug 2017 11:14:14 +0300
+Subject: [PATCH] net_sched/codel: do not defer queue length update
+
+When codel wants to drop last packet in ->dequeue() it cannot call
+qdisc_tree_reduce_backlog() right away - it will notify parent qdisc
+about zero qlen and HTB/HFSC will deactivate class. The same class will
+be deactivated second time by caller of ->dequeue(). Currently codel and
+fq_codel defer update. This triggers warning in HFSC when it's qlen != 0
+but there is no active classes.
+
+This patch update parent queue length immediately: just temporary increase
+qlen around qdisc_tree_reduce_backlog() to prevent first class deactivation
+if we have skb to return.
+
+This might open another problem in HFSC - now operation peek could fail and
+deactivate parent class.
+
+Signed-off-by: Konstantin Khlebnikov <khlebnikov@yandex-team.ru>
+Link: https://bugzilla.kernel.org/show_bug.cgi?id=109581
+---
+
+--- a/net/sched/sch_codel.c
++++ b/net/sched/sch_codel.c
+@@ -95,11 +95,17 @@ static struct sk_buff *codel_qdisc_deque
+ 			    &q->stats, qdisc_pkt_len, codel_get_enqueue_time,
+ 			    drop_func, dequeue_func);
+ 
+-	/* We cant call qdisc_tree_reduce_backlog() if our qlen is 0,
+-	 * or HTB crashes. Defer it for next round.
++	/* If our qlen is 0 qdisc_tree_reduce_backlog() will deactivate
++	 * parent class, dequeue in parent qdisc will do the same if we
++	 * return skb. Temporary increment qlen if we have skb.
+ 	 */
+-	if (q->stats.drop_count && sch->q.qlen) {
+-		qdisc_tree_reduce_backlog(sch, q->stats.drop_count, q->stats.drop_len);
++	if (q->stats.drop_count) {
++		if (skb)
++			sch->q.qlen++;
++		qdisc_tree_reduce_backlog(sch, q->stats.drop_count,
++					  q->stats.drop_len);
++		if (skb)
++			sch->q.qlen--;
+ 		q->stats.drop_count = 0;
+ 		q->stats.drop_len = 0;
+ 	}
+--- a/net/sched/sch_fq_codel.c
++++ b/net/sched/sch_fq_codel.c
+@@ -317,6 +317,21 @@ begin:
+ 	flow->dropped += q->cstats.drop_count - prev_drop_count;
+ 	flow->dropped += q->cstats.ecn_mark - prev_ecn_mark;
+ 
++	/* If our qlen is 0 qdisc_tree_reduce_backlog() will deactivate
++	 * parent class, dequeue in parent qdisc will do the same if we
++	 * return skb. Temporary increment qlen if we have skb.
++	 */
++	if (q->cstats.drop_count) {
++		if (skb)
++			sch->q.qlen++;
++		qdisc_tree_reduce_backlog(sch, q->cstats.drop_count,
++					  q->cstats.drop_len);
++		if (skb)
++			sch->q.qlen--;
++		q->cstats.drop_count = 0;
++		q->cstats.drop_len = 0;
++	}
++
+ 	if (!skb) {
+ 		/* force a pass through old_flows to prevent starvation */
+ 		if ((head == &q->new_flows) && !list_empty(&q->old_flows))
+@@ -327,15 +342,6 @@ begin:
+ 	}
+ 	qdisc_bstats_update(sch, skb);
+ 	flow->deficit -= qdisc_pkt_len(skb);
+-	/* We cant call qdisc_tree_reduce_backlog() if our qlen is 0,
+-	 * or HTB crashes. Defer it for next round.
+-	 */
+-	if (q->cstats.drop_count && sch->q.qlen) {
+-		qdisc_tree_reduce_backlog(sch, q->cstats.drop_count,
+-					  q->cstats.drop_len);
+-		q->cstats.drop_count = 0;
+-		q->cstats.drop_len = 0;
+-	}
+ 	return skb;
+ }
+ 
diff --git a/target/linux/generic/pending-5.4/630-packet_socket_type.patch b/target/linux/generic/pending-5.4/630-packet_socket_type.patch
new file mode 100644
index 0000000000..25f44b466a
--- /dev/null
+++ b/target/linux/generic/pending-5.4/630-packet_socket_type.patch
@@ -0,0 +1,138 @@
+From: Felix Fietkau <nbd@nbd.name>
+Subject: net: add an optimization for dealing with raw sockets
+
+lede-commit: 4898039703d7315f0f3431c860123338ec3be0f6
+Signed-off-by: Felix Fietkau <nbd@nbd.name>
+---
+ include/uapi/linux/if_packet.h |  3 +++
+ net/packet/af_packet.c         | 34 +++++++++++++++++++++++++++-------
+ net/packet/internal.h          |  1 +
+ 3 files changed, 31 insertions(+), 7 deletions(-)
+
+--- a/include/uapi/linux/if_packet.h
++++ b/include/uapi/linux/if_packet.h
+@@ -32,6 +32,8 @@ struct sockaddr_ll {
+ #define PACKET_KERNEL		7		/* To kernel space	*/
+ /* Unused, PACKET_FASTROUTE and PACKET_LOOPBACK are invisible to user space */
+ #define PACKET_FASTROUTE	6		/* Fastrouted frame	*/
++#define PACKET_MASK_ANY		0xffffffff	/* mask for packet type bits */
++
+ 
+ /* Packet socket options */
+ 
+@@ -57,6 +59,7 @@ struct sockaddr_ll {
+ #define PACKET_QDISC_BYPASS		20
+ #define PACKET_ROLLOVER_STATS		21
+ #define PACKET_FANOUT_DATA		22
++#define PACKET_RECV_TYPE		23
+ 
+ #define PACKET_FANOUT_HASH		0
+ #define PACKET_FANOUT_LB		1
+--- a/net/packet/af_packet.c
++++ b/net/packet/af_packet.c
+@@ -1796,6 +1796,7 @@ static int packet_rcv_spkt(struct sk_buf
+ {
+ 	struct sock *sk;
+ 	struct sockaddr_pkt *spkt;
++	struct packet_sock *po;
+ 
+ 	/*
+ 	 *	When we registered the protocol we saved the socket in the data
+@@ -1803,6 +1804,7 @@ static int packet_rcv_spkt(struct sk_buf
+ 	 */
+ 
+ 	sk = pt->af_packet_priv;
++	po = pkt_sk(sk);
+ 
+ 	/*
+ 	 *	Yank back the headers [hope the device set this
+@@ -1815,7 +1817,7 @@ static int packet_rcv_spkt(struct sk_buf
+ 	 *	so that this procedure is noop.
+ 	 */
+ 
+-	if (skb->pkt_type == PACKET_LOOPBACK)
++	if (!(po->pkt_type & (1 << skb->pkt_type)))
+ 		goto out;
+ 
+ 	if (!net_eq(dev_net(dev), sock_net(sk)))
+@@ -2043,12 +2045,12 @@ static int packet_rcv(struct sk_buff *sk
+ 	unsigned int snaplen, res;
+ 	bool is_drop_n_account = false;
+ 
+-	if (skb->pkt_type == PACKET_LOOPBACK)
+-		goto drop;
+-
+ 	sk = pt->af_packet_priv;
+ 	po = pkt_sk(sk);
+ 
++	if (!(po->pkt_type & (1 << skb->pkt_type)))
++		goto drop;
++
+ 	if (!net_eq(dev_net(dev), sock_net(sk)))
+ 		goto drop;
+ 
+@@ -2174,12 +2176,12 @@ static int tpacket_rcv(struct sk_buff *s
+ 	BUILD_BUG_ON(TPACKET_ALIGN(sizeof(*h.h2)) != 32);
+ 	BUILD_BUG_ON(TPACKET_ALIGN(sizeof(*h.h3)) != 48);
+ 
+-	if (skb->pkt_type == PACKET_LOOPBACK)
+-		goto drop;
+-
+ 	sk = pt->af_packet_priv;
+ 	po = pkt_sk(sk);
+ 
++	if (!(po->pkt_type & (1 << skb->pkt_type)))
++		goto drop;
++
+ 	if (!net_eq(dev_net(dev), sock_net(sk)))
+ 		goto drop;
+ 
+@@ -3265,6 +3267,7 @@ static int packet_create(struct net *net
+ 	mutex_init(&po->pg_vec_lock);
+ 	po->rollover = NULL;
+ 	po->prot_hook.func = packet_rcv;
++	po->pkt_type = PACKET_MASK_ANY & ~(1 << PACKET_LOOPBACK);
+ 
+ 	if (sock->type == SOCK_PACKET)
+ 		po->prot_hook.func = packet_rcv_spkt;
+@@ -3885,6 +3888,16 @@ packet_setsockopt(struct socket *sock, i
+ 		po->xmit = val ? packet_direct_xmit : dev_queue_xmit;
+ 		return 0;
+ 	}
++        case PACKET_RECV_TYPE:
++        {
++                unsigned int val;
++                if (optlen != sizeof(val))
++                        return -EINVAL;
++                if (copy_from_user(&val, optval, sizeof(val)))
++                        return -EFAULT;
++                po->pkt_type = val & ~BIT(PACKET_LOOPBACK);
++                return 0;
++        }
+ 	default:
+ 		return -ENOPROTOOPT;
+ 	}
+@@ -3937,6 +3950,13 @@ static int packet_getsockopt(struct sock
+ 	case PACKET_VNET_HDR:
+ 		val = po->has_vnet_hdr;
+ 		break;
++	case PACKET_RECV_TYPE:
++		if (len > sizeof(unsigned int))
++			len = sizeof(unsigned int);
++		val = po->pkt_type;
++
++		data = &val;
++		break;
+ 	case PACKET_VERSION:
+ 		val = po->tp_version;
+ 		break;
+--- a/net/packet/internal.h
++++ b/net/packet/internal.h
+@@ -132,6 +132,7 @@ struct packet_sock {
+ 	struct net_device __rcu	*cached_dev;
+ 	int			(*xmit)(struct sk_buff *skb);
+ 	struct packet_type	prot_hook ____cacheline_aligned_in_smp;
++	unsigned int		pkt_type;
+ };
+ 
+ static struct packet_sock *pkt_sk(struct sock *sk)
diff --git a/target/linux/generic/pending-5.4/640-netfilter-nf_flow_table-add-hardware-offload-support.patch b/target/linux/generic/pending-5.4/640-netfilter-nf_flow_table-add-hardware-offload-support.patch
new file mode 100644
index 0000000000..f0946e8dd2
--- /dev/null
+++ b/target/linux/generic/pending-5.4/640-netfilter-nf_flow_table-add-hardware-offload-support.patch
@@ -0,0 +1,564 @@
+From: Pablo Neira Ayuso <pablo@netfilter.org>
+Date: Thu, 11 Jan 2018 16:32:00 +0100
+Subject: [PATCH] netfilter: nf_flow_table: add hardware offload support
+
+This patch adds the infrastructure to offload flows to hardware, in case
+the nic/switch comes with built-in flow tables capabilities.
+
+If the hardware comes with no hardware flow tables or they have
+limitations in terms of features, the existing infrastructure falls back
+to the software flow table implementation.
+
+The software flow table garbage collector skips entries that resides in
+the hardware, so the hardware will be responsible for releasing this
+flow table entry too via flow_offload_dead().
+
+Hardware configuration, either to add or to delete entries, is done from
+the hardware offload workqueue, to ensure this is done from user context
+given that we may sleep when grabbing the mdio mutex.
+
+Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
+---
+ create mode 100644 net/netfilter/nf_flow_table_hw.c
+
+--- a/include/linux/netdevice.h
++++ b/include/linux/netdevice.h
+@@ -918,6 +918,13 @@ struct dev_ifalias {
+ 	char ifalias[];
+ };
+ 
++struct flow_offload;
++
++enum flow_offload_type {
++	FLOW_OFFLOAD_ADD	= 0,
++	FLOW_OFFLOAD_DEL,
++};
++
+ /*
+  * This structure defines the management hooks for network devices.
+  * The following hooks can be defined; unless noted otherwise, they are
+@@ -1150,6 +1157,10 @@ struct dev_ifalias {
+  * int (*ndo_bridge_dellink)(struct net_device *dev, struct nlmsghdr *nlh,
+  *			     u16 flags);
+  *
++ * int (*ndo_flow_offload)(enum flow_offload_type type,
++ *			   struct flow_offload *flow);
++ *	Adds/deletes flow entry to/from net device flowtable.
++ *
+  * int (*ndo_change_carrier)(struct net_device *dev, bool new_carrier);
+  *	Called to change device carrier. Soft-devices (like dummy, team, etc)
+  *	which do not represent real hardware may define this to allow their
+@@ -1377,6 +1388,8 @@ struct net_device_ops {
+ 	int			(*ndo_bridge_dellink)(struct net_device *dev,
+ 						      struct nlmsghdr *nlh,
+ 						      u16 flags);
++	int			(*ndo_flow_offload)(enum flow_offload_type type,
++						    struct flow_offload *flow);
+ 	int			(*ndo_change_carrier)(struct net_device *dev,
+ 						      bool new_carrier);
+ 	int			(*ndo_get_phys_port_id)(struct net_device *dev,
+--- a/include/net/netfilter/nf_flow_table.h
++++ b/include/net/netfilter/nf_flow_table.h
+@@ -20,11 +20,17 @@ struct nf_flowtable_type {
+ 	struct module			*owner;
+ };
+ 
++enum nf_flowtable_flags {
++	NF_FLOWTABLE_F_HW		= 0x1,
++};
++
+ struct nf_flowtable {
+ 	struct list_head		list;
+ 	struct rhashtable		rhashtable;
+ 	const struct nf_flowtable_type	*type;
++	u32				flags;
+ 	struct delayed_work		gc_work;
++	possible_net_t			ft_net;
+ };
+ 
+ enum flow_offload_tuple_dir {
+@@ -69,6 +75,7 @@ struct flow_offload_tuple_rhash {
+ #define FLOW_OFFLOAD_DNAT	0x2
+ #define FLOW_OFFLOAD_DYING	0x4
+ #define FLOW_OFFLOAD_TEARDOWN	0x8
++#define FLOW_OFFLOAD_HW		0x10
+ 
+ struct flow_offload {
+ 	struct flow_offload_tuple_rhash		tuplehash[FLOW_OFFLOAD_DIR_MAX];
+@@ -125,6 +132,22 @@ unsigned int nf_flow_offload_ip_hook(voi
+ unsigned int nf_flow_offload_ipv6_hook(void *priv, struct sk_buff *skb,
+ 				       const struct nf_hook_state *state);
+ 
++void nf_flow_offload_hw_add(struct net *net, struct flow_offload *flow,
++			    struct nf_conn *ct);
++void nf_flow_offload_hw_del(struct net *net, struct flow_offload *flow);
++
++struct nf_flow_table_hw {
++	struct module	*owner;
++	void		(*add)(struct net *net, struct flow_offload *flow,
++			       struct nf_conn *ct);
++	void		(*del)(struct net *net, struct flow_offload *flow);
++};
++
++int nf_flow_table_hw_register(const struct nf_flow_table_hw *offload);
++void nf_flow_table_hw_unregister(const struct nf_flow_table_hw *offload);
++
++extern struct work_struct nf_flow_offload_hw_work;
++
+ #define MODULE_ALIAS_NF_FLOWTABLE(family)	\
+ 	MODULE_ALIAS("nf-flowtable-" __stringify(family))
+ 
+--- a/include/uapi/linux/netfilter/nf_tables.h
++++ b/include/uapi/linux/netfilter/nf_tables.h
+@@ -1464,6 +1464,7 @@ enum nft_object_attributes {
+  * @NFTA_FLOWTABLE_HOOK: netfilter hook configuration(NLA_U32)
+  * @NFTA_FLOWTABLE_USE: number of references to this flow table (NLA_U32)
+  * @NFTA_FLOWTABLE_HANDLE: object handle (NLA_U64)
++ * @NFTA_FLOWTABLE_FLAGS: flags (NLA_U32)
+  */
+ enum nft_flowtable_attributes {
+ 	NFTA_FLOWTABLE_UNSPEC,
+@@ -1473,6 +1474,7 @@ enum nft_flowtable_attributes {
+ 	NFTA_FLOWTABLE_USE,
+ 	NFTA_FLOWTABLE_HANDLE,
+ 	NFTA_FLOWTABLE_PAD,
++	NFTA_FLOWTABLE_FLAGS,
+ 	__NFTA_FLOWTABLE_MAX
+ };
+ #define NFTA_FLOWTABLE_MAX	(__NFTA_FLOWTABLE_MAX - 1)
+--- a/net/netfilter/Kconfig
++++ b/net/netfilter/Kconfig
+@@ -714,6 +714,15 @@ config NF_FLOW_TABLE
+ 
+ 	  To compile it as a module, choose M here.
+ 
++config NF_FLOW_TABLE_HW
++	tristate "Netfilter flow table hardware offload module"
++	depends on NF_FLOW_TABLE
++	help
++	  This option adds hardware offload support for the flow table core
++	  infrastructure.
++
++	  To compile it as a module, choose M here.
++
+ config NETFILTER_XTABLES
+ 	tristate "Netfilter Xtables support (required for ip_tables)"
+ 	default m if NETFILTER_ADVANCED=n
+--- a/net/netfilter/Makefile
++++ b/net/netfilter/Makefile
+@@ -126,6 +126,7 @@ obj-$(CONFIG_NF_FLOW_TABLE)	+= nf_flow_t
+ nf_flow_table-objs := nf_flow_table_core.o nf_flow_table_ip.o
+ 
+ obj-$(CONFIG_NF_FLOW_TABLE_INET) += nf_flow_table_inet.o
++obj-$(CONFIG_NF_FLOW_TABLE_HW)	+= nf_flow_table_hw.o
+ 
+ # generic X tables 
+ obj-$(CONFIG_NETFILTER_XTABLES) += x_tables.o xt_tcpudp.o
+--- a/net/netfilter/nf_flow_table_core.c
++++ b/net/netfilter/nf_flow_table_core.c
+@@ -228,10 +228,16 @@ int flow_offload_add(struct nf_flowtable
+ }
+ EXPORT_SYMBOL_GPL(flow_offload_add);
+ 
++static inline bool nf_flow_in_hw(const struct flow_offload *flow)
++{
++	return flow->flags & FLOW_OFFLOAD_HW;
++}
++
+ static void flow_offload_del(struct nf_flowtable *flow_table,
+ 			     struct flow_offload *flow)
+ {
+ 	struct flow_offload_entry *e;
++	struct net *net = read_pnet(&flow_table->ft_net);
+ 
+ 	rhashtable_remove_fast(&flow_table->rhashtable,
+ 			       &flow->tuplehash[FLOW_OFFLOAD_DIR_ORIGINAL].node,
+@@ -246,6 +252,9 @@ static void flow_offload_del(struct nf_f
+ 	if (!(flow->flags & FLOW_OFFLOAD_TEARDOWN))
+ 		flow_offload_fixup_ct_state(e->ct);
+ 
++	if (nf_flow_in_hw(flow))
++		nf_flow_offload_hw_del(net, flow);
++
+ 	flow_offload_free(flow);
+ }
+ 
+@@ -359,6 +368,9 @@ static int nf_flow_offload_gc_step(struc
+ 		if (!teardown)
+ 			nf_ct_offload_timeout(flow);
+ 
++		if (nf_flow_in_hw(flow) && !teardown)
++			continue;
++
+ 		if (nf_flow_has_expired(flow) || teardown)
+ 			flow_offload_del(flow_table, flow);
+ 	}
+@@ -494,10 +506,43 @@ int nf_flow_dnat_port(const struct flow_
+ }
+ EXPORT_SYMBOL_GPL(nf_flow_dnat_port);
+ 
++static const struct nf_flow_table_hw __rcu *nf_flow_table_hw_hook __read_mostly;
++
++static int nf_flow_offload_hw_init(struct nf_flowtable *flow_table)
++{
++	const struct nf_flow_table_hw *offload;
++
++	if (!rcu_access_pointer(nf_flow_table_hw_hook))
++		request_module("nf-flow-table-hw");
++
++	rcu_read_lock();
++	offload = rcu_dereference(nf_flow_table_hw_hook);
++	if (!offload)
++		goto err_no_hw_offload;
++
++	if (!try_module_get(offload->owner))
++		goto err_no_hw_offload;
++
++	rcu_read_unlock();
++
++	return 0;
++
++err_no_hw_offload:
++	rcu_read_unlock();
++
++	return -EOPNOTSUPP;
++}
++
+ int nf_flow_table_init(struct nf_flowtable *flowtable)
+ {
+ 	int err;
+ 
++	if (flowtable->flags & NF_FLOWTABLE_F_HW) {
++		err = nf_flow_offload_hw_init(flowtable);
++		if (err)
++			return err;
++	}
++
+ 	INIT_DEFERRABLE_WORK(&flowtable->gc_work, nf_flow_offload_work_gc);
+ 
+ 	err = rhashtable_init(&flowtable->rhashtable,
+@@ -538,6 +583,8 @@ static void nf_flow_table_iterate_cleanu
+ {
+ 	nf_flow_table_iterate(flowtable, nf_flow_table_do_cleanup, dev);
+ 	flush_delayed_work(&flowtable->gc_work);
++	if (flowtable->flags & NF_FLOWTABLE_F_HW)
++		flush_work(&nf_flow_offload_hw_work);
+ }
+ 
+ void nf_flow_table_cleanup(struct net *net, struct net_device *dev)
+@@ -551,6 +598,26 @@ void nf_flow_table_cleanup(struct net *n
+ }
+ EXPORT_SYMBOL_GPL(nf_flow_table_cleanup);
+ 
++struct work_struct nf_flow_offload_hw_work;
++EXPORT_SYMBOL_GPL(nf_flow_offload_hw_work);
++
++/* Give the hardware workqueue the chance to remove entries from hardware.*/
++static void nf_flow_offload_hw_free(struct nf_flowtable *flowtable)
++{
++	const struct nf_flow_table_hw *offload;
++
++	flush_work(&nf_flow_offload_hw_work);
++
++	rcu_read_lock();
++	offload = rcu_dereference(nf_flow_table_hw_hook);
++	if (!offload) {
++		rcu_read_unlock();
++		return;
++	}
++	module_put(offload->owner);
++	rcu_read_unlock();
++}
++
+ void nf_flow_table_free(struct nf_flowtable *flow_table)
+ {
+ 	mutex_lock(&flowtable_lock);
+@@ -560,9 +627,58 @@ void nf_flow_table_free(struct nf_flowta
+ 	nf_flow_table_iterate(flow_table, nf_flow_table_do_cleanup, NULL);
+ 	WARN_ON(!nf_flow_offload_gc_step(flow_table));
+ 	rhashtable_destroy(&flow_table->rhashtable);
++	if (flow_table->flags & NF_FLOWTABLE_F_HW)
++		nf_flow_offload_hw_free(flow_table);
+ }
+ EXPORT_SYMBOL_GPL(nf_flow_table_free);
+ 
++/* Must be called from user context. */
++void nf_flow_offload_hw_add(struct net *net, struct flow_offload *flow,
++			    struct nf_conn *ct)
++{
++	const struct nf_flow_table_hw *offload;
++
++	rcu_read_lock();
++	offload = rcu_dereference(nf_flow_table_hw_hook);
++	if (offload)
++		offload->add(net, flow, ct);
++	rcu_read_unlock();
++}
++EXPORT_SYMBOL_GPL(nf_flow_offload_hw_add);
++
++/* Must be called from user context. */
++void nf_flow_offload_hw_del(struct net *net, struct flow_offload *flow)
++{
++	const struct nf_flow_table_hw *offload;
++
++	rcu_read_lock();
++	offload = rcu_dereference(nf_flow_table_hw_hook);
++	if (offload)
++		offload->del(net, flow);
++	rcu_read_unlock();
++}
++EXPORT_SYMBOL_GPL(nf_flow_offload_hw_del);
++
++int nf_flow_table_hw_register(const struct nf_flow_table_hw *offload)
++{
++	if (rcu_access_pointer(nf_flow_table_hw_hook))
++		return -EBUSY;
++
++	rcu_assign_pointer(nf_flow_table_hw_hook, offload);
++
++	return 0;
++}
++EXPORT_SYMBOL_GPL(nf_flow_table_hw_register);
++
++void nf_flow_table_hw_unregister(const struct nf_flow_table_hw *offload)
++{
++	WARN_ON(rcu_access_pointer(nf_flow_table_hw_hook) != offload);
++	rcu_assign_pointer(nf_flow_table_hw_hook, NULL);
++
++	synchronize_rcu();
++}
++EXPORT_SYMBOL_GPL(nf_flow_table_hw_unregister);
++
+ static int nf_flow_table_netdev_event(struct notifier_block *this,
+ 				      unsigned long event, void *ptr)
+ {
+--- /dev/null
++++ b/net/netfilter/nf_flow_table_hw.c
+@@ -0,0 +1,169 @@
++#include <linux/kernel.h>
++#include <linux/init.h>
++#include <linux/module.h>
++#include <linux/netfilter.h>
++#include <linux/rhashtable.h>
++#include <linux/netdevice.h>
++#include <net/netfilter/nf_flow_table.h>
++#include <net/netfilter/nf_conntrack.h>
++#include <net/netfilter/nf_conntrack_core.h>
++#include <net/netfilter/nf_conntrack_tuple.h>
++
++static DEFINE_SPINLOCK(flow_offload_hw_pending_list_lock);
++static LIST_HEAD(flow_offload_hw_pending_list);
++
++static DEFINE_MUTEX(nf_flow_offload_hw_mutex);
++
++struct flow_offload_hw {
++	struct list_head	list;
++	enum flow_offload_type	type;
++	struct flow_offload	*flow;
++	struct nf_conn		*ct;
++	possible_net_t		flow_hw_net;
++};
++
++static int do_flow_offload_hw(struct net *net, struct flow_offload *flow,
++			      int type)
++{
++	struct net_device *indev;
++	int ret, ifindex;
++
++	ifindex = flow->tuplehash[FLOW_OFFLOAD_DIR_ORIGINAL].tuple.iifidx;
++	indev = dev_get_by_index(net, ifindex);
++	if (WARN_ON(!indev))
++		return 0;
++
++	mutex_lock(&nf_flow_offload_hw_mutex);
++	ret = indev->netdev_ops->ndo_flow_offload(type, flow);
++	mutex_unlock(&nf_flow_offload_hw_mutex);
++
++	dev_put(indev);
++
++	return ret;
++}
++
++static void flow_offload_hw_work_add(struct flow_offload_hw *offload)
++{
++	struct net *net;
++	int ret;
++
++	if (nf_ct_is_dying(offload->ct))
++		return;
++
++	net = read_pnet(&offload->flow_hw_net);
++	ret = do_flow_offload_hw(net, offload->flow, FLOW_OFFLOAD_ADD);
++	if (ret >= 0)
++		offload->flow->flags |= FLOW_OFFLOAD_HW;
++}
++
++static void flow_offload_hw_work_del(struct flow_offload_hw *offload)
++{
++	struct net *net = read_pnet(&offload->flow_hw_net);
++
++	do_flow_offload_hw(net, offload->flow, FLOW_OFFLOAD_DEL);
++}
++
++static void flow_offload_hw_work(struct work_struct *work)
++{
++	struct flow_offload_hw *offload, *next;
++	LIST_HEAD(hw_offload_pending);
++
++	spin_lock_bh(&flow_offload_hw_pending_list_lock);
++	list_replace_init(&flow_offload_hw_pending_list, &hw_offload_pending);
++	spin_unlock_bh(&flow_offload_hw_pending_list_lock);
++
++	list_for_each_entry_safe(offload, next, &hw_offload_pending, list) {
++		switch (offload->type) {
++		case FLOW_OFFLOAD_ADD:
++			flow_offload_hw_work_add(offload);
++			break;
++		case FLOW_OFFLOAD_DEL:
++			flow_offload_hw_work_del(offload);
++			break;
++		}
++		if (offload->ct)
++			nf_conntrack_put(&offload->ct->ct_general);
++		list_del(&offload->list);
++		kfree(offload);
++	}
++}
++
++static void flow_offload_queue_work(struct flow_offload_hw *offload)
++{
++	spin_lock_bh(&flow_offload_hw_pending_list_lock);
++	list_add_tail(&offload->list, &flow_offload_hw_pending_list);
++	spin_unlock_bh(&flow_offload_hw_pending_list_lock);
++
++	schedule_work(&nf_flow_offload_hw_work);
++}
++
++static void flow_offload_hw_add(struct net *net, struct flow_offload *flow,
++				struct nf_conn *ct)
++{
++	struct flow_offload_hw *offload;
++
++	offload = kmalloc(sizeof(struct flow_offload_hw), GFP_ATOMIC);
++	if (!offload)
++		return;
++
++	nf_conntrack_get(&ct->ct_general);
++	offload->type = FLOW_OFFLOAD_ADD;
++	offload->ct = ct;
++	offload->flow = flow;
++	write_pnet(&offload->flow_hw_net, net);
++
++	flow_offload_queue_work(offload);
++}
++
++static void flow_offload_hw_del(struct net *net, struct flow_offload *flow)
++{
++	struct flow_offload_hw *offload;
++
++	offload = kmalloc(sizeof(struct flow_offload_hw), GFP_ATOMIC);
++	if (!offload)
++		return;
++
++	offload->type = FLOW_OFFLOAD_DEL;
++	offload->ct = NULL;
++	offload->flow = flow;
++	write_pnet(&offload->flow_hw_net, net);
++
++	flow_offload_queue_work(offload);
++}
++
++static const struct nf_flow_table_hw flow_offload_hw = {
++	.add	= flow_offload_hw_add,
++	.del	= flow_offload_hw_del,
++	.owner	= THIS_MODULE,
++};
++
++static int __init nf_flow_table_hw_module_init(void)
++{
++	INIT_WORK(&nf_flow_offload_hw_work, flow_offload_hw_work);
++	nf_flow_table_hw_register(&flow_offload_hw);
++
++	return 0;
++}
++
++static void __exit nf_flow_table_hw_module_exit(void)
++{
++	struct flow_offload_hw *offload, *next;
++	LIST_HEAD(hw_offload_pending);
++
++	nf_flow_table_hw_unregister(&flow_offload_hw);
++	cancel_work_sync(&nf_flow_offload_hw_work);
++
++	list_for_each_entry_safe(offload, next, &hw_offload_pending, list) {
++		if (offload->ct)
++			nf_conntrack_put(&offload->ct->ct_general);
++		list_del(&offload->list);
++		kfree(offload);
++	}
++}
++
++module_init(nf_flow_table_hw_module_init);
++module_exit(nf_flow_table_hw_module_exit);
++
++MODULE_LICENSE("GPL");
++MODULE_AUTHOR("Pablo Neira Ayuso <pablo@netfilter.org>");
++MODULE_ALIAS("nf-flow-table-hw");
+--- a/net/netfilter/nf_tables_api.c
++++ b/net/netfilter/nf_tables_api.c
+@@ -5503,6 +5503,13 @@ static int nf_tables_flowtable_parse_hoo
+ 	if (err < 0)
+ 		return err;
+ 
++	for (i = 0; i < n; i++) {
++		if (flowtable->data.flags & NF_FLOWTABLE_F_HW &&
++		    !dev_array[i]->netdev_ops->ndo_flow_offload) {
++			return -EOPNOTSUPP;
++		}
++	}
++
+ 	ops = kcalloc(n, sizeof(struct nf_hook_ops), GFP_KERNEL);
+ 	if (!ops)
+ 		return -ENOMEM;
+@@ -5634,10 +5641,19 @@ static int nf_tables_newflowtable(struct
+ 	}
+ 
+ 	flowtable->data.type = type;
++	write_pnet(&flowtable->data.ft_net, net);
++
+ 	err = type->init(&flowtable->data);
+ 	if (err < 0)
+ 		goto err3;
+ 
++	if (nla[NFTA_FLOWTABLE_FLAGS]) {
++		flowtable->data.flags =
++			ntohl(nla_get_be32(nla[NFTA_FLOWTABLE_FLAGS]));
++		if (flowtable->data.flags & ~NF_FLOWTABLE_F_HW)
++			goto err4;
++	}
++
+ 	err = nf_tables_flowtable_parse_hook(&ctx, nla[NFTA_FLOWTABLE_HOOK],
+ 					     flowtable);
+ 	if (err < 0)
+@@ -5763,7 +5779,8 @@ static int nf_tables_fill_flowtable_info
+ 	    nla_put_string(skb, NFTA_FLOWTABLE_NAME, flowtable->name) ||
+ 	    nla_put_be32(skb, NFTA_FLOWTABLE_USE, htonl(flowtable->use)) ||
+ 	    nla_put_be64(skb, NFTA_FLOWTABLE_HANDLE, cpu_to_be64(flowtable->handle),
+-			 NFTA_FLOWTABLE_PAD))
++			 NFTA_FLOWTABLE_PAD) ||
++	    nla_put_be32(skb, NFTA_FLOWTABLE_FLAGS, htonl(flowtable->data.flags)))
+ 		goto nla_put_failure;
+ 
+ 	nest = nla_nest_start(skb, NFTA_FLOWTABLE_HOOK);
+--- a/net/netfilter/nft_flow_offload.c
++++ b/net/netfilter/nft_flow_offload.c
+@@ -126,6 +126,9 @@ static void nft_flow_offload_eval(const
+ 	if (ret < 0)
+ 		goto err_flow_add;
+ 
++	if (flowtable->flags & NF_FLOWTABLE_F_HW)
++		nf_flow_offload_hw_add(nft_net(pkt), flow, ct);
++
+ 	dst_release(route.tuple[!dir].dst);
+ 	return;
+ 
diff --git a/target/linux/generic/pending-5.4/641-netfilter-nf_flow_table-support-hw-offload-through-v.patch b/target/linux/generic/pending-5.4/641-netfilter-nf_flow_table-support-hw-offload-through-v.patch
new file mode 100644
index 0000000000..87ff634793
--- /dev/null
+++ b/target/linux/generic/pending-5.4/641-netfilter-nf_flow_table-support-hw-offload-through-v.patch
@@ -0,0 +1,303 @@
+From: Felix Fietkau <nbd@nbd.name>
+Date: Thu, 15 Mar 2018 20:46:31 +0100
+Subject: [PATCH] netfilter: nf_flow_table: support hw offload through
+ virtual interfaces
+
+There are hardware offload devices that support offloading VLANs and
+PPPoE devices. Additionally, it is useful to be able to offload packets
+routed through bridge interfaces as well.
+Add support for finding the path to the offload device through these
+virtual interfaces, while collecting useful parameters for the offload
+device, like VLAN ID/protocol, PPPoE session and Ethernet MAC address.
+
+Signed-off-by: Felix Fietkau <nbd@nbd.name>
+---
+
+--- a/include/linux/netdevice.h
++++ b/include/linux/netdevice.h
+@@ -919,6 +919,7 @@ struct dev_ifalias {
+ };
+ 
+ struct flow_offload;
++struct flow_offload_hw_path;
+ 
+ enum flow_offload_type {
+ 	FLOW_OFFLOAD_ADD	= 0,
+@@ -1157,8 +1158,15 @@ enum flow_offload_type {
+  * int (*ndo_bridge_dellink)(struct net_device *dev, struct nlmsghdr *nlh,
+  *			     u16 flags);
+  *
++ * int (*ndo_flow_offload_check)(struct flow_offload_hw_path *path);
++ *	For virtual devices like bridges, vlan, and pppoe, fill in the
++ *	underlying network device that can be used for offloading connections.
++ *	Return an error if offloading is not supported.
++ *
+  * int (*ndo_flow_offload)(enum flow_offload_type type,
+- *			   struct flow_offload *flow);
++ *			   struct flow_offload *flow,
++ *			   struct flow_offload_hw_path *src,
++ *			   struct flow_offload_hw_path *dest);
+  *	Adds/deletes flow entry to/from net device flowtable.
+  *
+  * int (*ndo_change_carrier)(struct net_device *dev, bool new_carrier);
+@@ -1388,8 +1396,11 @@ struct net_device_ops {
+ 	int			(*ndo_bridge_dellink)(struct net_device *dev,
+ 						      struct nlmsghdr *nlh,
+ 						      u16 flags);
++	int			(*ndo_flow_offload_check)(struct flow_offload_hw_path *path);
+ 	int			(*ndo_flow_offload)(enum flow_offload_type type,
+-						    struct flow_offload *flow);
++						    struct flow_offload *flow,
++						    struct flow_offload_hw_path *src,
++						    struct flow_offload_hw_path *dest);
+ 	int			(*ndo_change_carrier)(struct net_device *dev,
+ 						      bool new_carrier);
+ 	int			(*ndo_get_phys_port_id)(struct net_device *dev,
+--- a/include/net/netfilter/nf_flow_table.h
++++ b/include/net/netfilter/nf_flow_table.h
+@@ -86,6 +86,21 @@ struct flow_offload {
+ 	};
+ };
+ 
++#define FLOW_OFFLOAD_PATH_ETHERNET	BIT(0)
++#define FLOW_OFFLOAD_PATH_VLAN		BIT(1)
++#define FLOW_OFFLOAD_PATH_PPPOE		BIT(2)
++
++struct flow_offload_hw_path {
++	struct net_device *dev;
++	u32 flags;
++
++	u8 eth_src[ETH_ALEN];
++	u8 eth_dest[ETH_ALEN];
++	u16 vlan_proto;
++	u16 vlan_id;
++	u16 pppoe_sid;
++};
++
+ #define NF_FLOW_TIMEOUT (30 * HZ)
+ 
+ struct nf_flow_route {
+--- a/net/netfilter/nf_flow_table_hw.c
++++ b/net/netfilter/nf_flow_table_hw.c
+@@ -19,48 +19,75 @@ struct flow_offload_hw {
+ 	enum flow_offload_type	type;
+ 	struct flow_offload	*flow;
+ 	struct nf_conn		*ct;
+-	possible_net_t		flow_hw_net;
++
++	struct flow_offload_hw_path src;
++	struct flow_offload_hw_path dest;
+ };
+ 
+-static int do_flow_offload_hw(struct net *net, struct flow_offload *flow,
+-			      int type)
++static void flow_offload_check_ethernet(struct flow_offload_tuple *tuple,
++					struct flow_offload_hw_path *path)
+ {
+-	struct net_device *indev;
+-	int ret, ifindex;
++	struct net_device *dev = path->dev;
++	struct neighbour *n;
+ 
+-	ifindex = flow->tuplehash[FLOW_OFFLOAD_DIR_ORIGINAL].tuple.iifidx;
+-	indev = dev_get_by_index(net, ifindex);
+-	if (WARN_ON(!indev))
+-		return 0;
+-
+-	mutex_lock(&nf_flow_offload_hw_mutex);
+-	ret = indev->netdev_ops->ndo_flow_offload(type, flow);
+-	mutex_unlock(&nf_flow_offload_hw_mutex);
++	if (dev->type != ARPHRD_ETHER)
++		return;
+ 
+-	dev_put(indev);
++	memcpy(path->eth_src, path->dev->dev_addr, ETH_ALEN);
++	n = dst_neigh_lookup(tuple->dst_cache, &tuple->src_v4);
++	if (!n)
++		return;
+ 
+-	return ret;
++	memcpy(path->eth_dest, n->ha, ETH_ALEN);
++	path->flags |= FLOW_OFFLOAD_PATH_ETHERNET;
++	neigh_release(n);
+ }
+ 
+-static void flow_offload_hw_work_add(struct flow_offload_hw *offload)
++static int flow_offload_check_path(struct net *net,
++				   struct flow_offload_tuple *tuple,
++				   struct flow_offload_hw_path *path)
+ {
+-	struct net *net;
+-	int ret;
++	struct net_device *dev;
+ 
+-	if (nf_ct_is_dying(offload->ct))
+-		return;
++	dev = dev_get_by_index_rcu(net, tuple->iifidx);
++	if (!dev)
++		return -ENOENT;
++
++	path->dev = dev;
++	flow_offload_check_ethernet(tuple, path);
+ 
+-	net = read_pnet(&offload->flow_hw_net);
+-	ret = do_flow_offload_hw(net, offload->flow, FLOW_OFFLOAD_ADD);
+-	if (ret >= 0)
+-		offload->flow->flags |= FLOW_OFFLOAD_HW;
++	if (dev->netdev_ops->ndo_flow_offload_check)
++		return dev->netdev_ops->ndo_flow_offload_check(path);
++
++	return 0;
+ }
+ 
+-static void flow_offload_hw_work_del(struct flow_offload_hw *offload)
++static int do_flow_offload_hw(struct flow_offload_hw *offload)
+ {
+-	struct net *net = read_pnet(&offload->flow_hw_net);
++	struct net_device *src_dev = offload->src.dev;
++	struct net_device *dest_dev = offload->dest.dev;
++	int ret;
++
++	ret = src_dev->netdev_ops->ndo_flow_offload(offload->type,
++						    offload->flow,
++						    &offload->src,
++						    &offload->dest);
++
++	/* restore devices in case the driver mangled them */
++	offload->src.dev = src_dev;
++	offload->dest.dev = dest_dev;
++
++	return ret;
++}
+ 
+-	do_flow_offload_hw(net, offload->flow, FLOW_OFFLOAD_DEL);
++static void flow_offload_hw_free(struct flow_offload_hw *offload)
++{
++	dev_put(offload->src.dev);
++	dev_put(offload->dest.dev);
++	if (offload->ct)
++		nf_conntrack_put(&offload->ct->ct_general);
++	list_del(&offload->list);
++	kfree(offload);
+ }
+ 
+ static void flow_offload_hw_work(struct work_struct *work)
+@@ -73,18 +100,22 @@ static void flow_offload_hw_work(struct
+ 	spin_unlock_bh(&flow_offload_hw_pending_list_lock);
+ 
+ 	list_for_each_entry_safe(offload, next, &hw_offload_pending, list) {
++		mutex_lock(&nf_flow_offload_hw_mutex);
+ 		switch (offload->type) {
+ 		case FLOW_OFFLOAD_ADD:
+-			flow_offload_hw_work_add(offload);
++			if (nf_ct_is_dying(offload->ct))
++				break;
++
++			if (do_flow_offload_hw(offload) >= 0)
++				offload->flow->flags |= FLOW_OFFLOAD_HW;
+ 			break;
+ 		case FLOW_OFFLOAD_DEL:
+-			flow_offload_hw_work_del(offload);
++			do_flow_offload_hw(offload);
+ 			break;
+ 		}
+-		if (offload->ct)
+-			nf_conntrack_put(&offload->ct->ct_general);
+-		list_del(&offload->list);
+-		kfree(offload);
++		mutex_unlock(&nf_flow_offload_hw_mutex);
++
++		flow_offload_hw_free(offload);
+ 	}
+ }
+ 
+@@ -97,20 +128,55 @@ static void flow_offload_queue_work(stru
+ 	schedule_work(&nf_flow_offload_hw_work);
+ }
+ 
++static struct flow_offload_hw *
++flow_offload_hw_prepare(struct net *net, struct flow_offload *flow)
++{
++	struct flow_offload_hw_path src = {};
++	struct flow_offload_hw_path dest = {};
++	struct flow_offload_tuple *tuple;
++	struct flow_offload_hw *offload = NULL;
++
++	rcu_read_lock_bh();
++
++	tuple = &flow->tuplehash[FLOW_OFFLOAD_DIR_ORIGINAL].tuple;
++	if (flow_offload_check_path(net, tuple, &src))
++		goto out;
++
++	tuple = &flow->tuplehash[FLOW_OFFLOAD_DIR_REPLY].tuple;
++	if (flow_offload_check_path(net, tuple, &dest))
++		goto out;
++
++	if (!src.dev->netdev_ops->ndo_flow_offload)
++		goto out;
++
++	offload = kzalloc(sizeof(struct flow_offload_hw), GFP_ATOMIC);
++	if (!offload)
++		goto out;
++
++	dev_hold(src.dev);
++	dev_hold(dest.dev);
++	offload->src = src;
++	offload->dest = dest;
++	offload->flow = flow;
++
++out:
++	rcu_read_unlock_bh();
++
++	return offload;
++}
++
+ static void flow_offload_hw_add(struct net *net, struct flow_offload *flow,
+ 				struct nf_conn *ct)
+ {
+ 	struct flow_offload_hw *offload;
+ 
+-	offload = kmalloc(sizeof(struct flow_offload_hw), GFP_ATOMIC);
++	offload = flow_offload_hw_prepare(net, flow);
+ 	if (!offload)
+ 		return;
+ 
+ 	nf_conntrack_get(&ct->ct_general);
+ 	offload->type = FLOW_OFFLOAD_ADD;
+ 	offload->ct = ct;
+-	offload->flow = flow;
+-	write_pnet(&offload->flow_hw_net, net);
+ 
+ 	flow_offload_queue_work(offload);
+ }
+@@ -119,14 +185,11 @@ static void flow_offload_hw_del(struct n
+ {
+ 	struct flow_offload_hw *offload;
+ 
+-	offload = kmalloc(sizeof(struct flow_offload_hw), GFP_ATOMIC);
++	offload = flow_offload_hw_prepare(net, flow);
+ 	if (!offload)
+ 		return;
+ 
+ 	offload->type = FLOW_OFFLOAD_DEL;
+-	offload->ct = NULL;
+-	offload->flow = flow;
+-	write_pnet(&offload->flow_hw_net, net);
+ 
+ 	flow_offload_queue_work(offload);
+ }
+@@ -153,12 +216,8 @@ static void __exit nf_flow_table_hw_modu
+ 	nf_flow_table_hw_unregister(&flow_offload_hw);
+ 	cancel_work_sync(&nf_flow_offload_hw_work);
+ 
+-	list_for_each_entry_safe(offload, next, &hw_offload_pending, list) {
+-		if (offload->ct)
+-			nf_conntrack_put(&offload->ct->ct_general);
+-		list_del(&offload->list);
+-		kfree(offload);
+-	}
++	list_for_each_entry_safe(offload, next, &hw_offload_pending, list)
++		flow_offload_hw_free(offload);
+ }
+ 
+ module_init(nf_flow_table_hw_module_init);
diff --git a/target/linux/generic/pending-5.4/642-net-8021q-support-hardware-flow-table-offload.patch b/target/linux/generic/pending-5.4/642-net-8021q-support-hardware-flow-table-offload.patch
new file mode 100644
index 0000000000..7547c14bed
--- /dev/null
+++ b/target/linux/generic/pending-5.4/642-net-8021q-support-hardware-flow-table-offload.patch
@@ -0,0 +1,60 @@
+From: Felix Fietkau <nbd@nbd.name>
+Date: Thu, 15 Mar 2018 20:49:58 +0100
+Subject: [PATCH] net: 8021q: support hardware flow table offload
+
+Add the VLAN ID and protocol information
+
+Signed-off-by: Felix Fietkau <nbd@nbd.name>
+---
+
+--- a/net/8021q/vlan_dev.c
++++ b/net/8021q/vlan_dev.c
+@@ -32,6 +32,10 @@
+ #include <linux/phy.h>
+ #include <net/arp.h>
+ #include <net/switchdev.h>
++#if IS_ENABLED(CONFIG_NF_FLOW_TABLE)
++#include <linux/netfilter.h>
++#include <net/netfilter/nf_flow_table.h>
++#endif
+ 
+ #include "vlan.h"
+ #include "vlanproc.h"
+@@ -771,6 +775,27 @@ static int vlan_dev_get_iflink(const str
+ 	return real_dev->ifindex;
+ }
+ 
++#if IS_ENABLED(CONFIG_NF_FLOW_TABLE)
++static int vlan_dev_flow_offload_check(struct flow_offload_hw_path *path)
++{
++	struct net_device *dev = path->dev;
++	struct vlan_dev_priv *vlan = vlan_dev_priv(dev);
++
++	if (path->flags & FLOW_OFFLOAD_PATH_VLAN)
++		return -EEXIST;
++
++	path->flags |= FLOW_OFFLOAD_PATH_VLAN;
++	path->vlan_proto = vlan->vlan_proto;
++	path->vlan_id = vlan->vlan_id;
++	path->dev = vlan->real_dev;
++
++	if (vlan->real_dev->netdev_ops->ndo_flow_offload_check)
++		return vlan->real_dev->netdev_ops->ndo_flow_offload_check(path);
++
++	return 0;
++}
++#endif /* CONFIG_NF_FLOW_TABLE */
++
+ static const struct ethtool_ops vlan_ethtool_ops = {
+ 	.get_link_ksettings	= vlan_ethtool_get_link_ksettings,
+ 	.get_drvinfo	        = vlan_ethtool_get_drvinfo,
+@@ -808,6 +833,9 @@ static const struct net_device_ops vlan_
+ 	.ndo_fix_features	= vlan_dev_fix_features,
+ 	.ndo_get_lock_subclass  = vlan_dev_get_lock_subclass,
+ 	.ndo_get_iflink		= vlan_dev_get_iflink,
++#if IS_ENABLED(CONFIG_NF_FLOW_TABLE)
++	.ndo_flow_offload_check = vlan_dev_flow_offload_check,
++#endif
+ };
+ 
+ static void vlan_dev_free(struct net_device *dev)
diff --git a/target/linux/generic/pending-5.4/643-net-bridge-support-hardware-flow-table-offload.patch b/target/linux/generic/pending-5.4/643-net-bridge-support-hardware-flow-table-offload.patch
new file mode 100644
index 0000000000..8b09fabf12
--- /dev/null
+++ b/target/linux/generic/pending-5.4/643-net-bridge-support-hardware-flow-table-offload.patch
@@ -0,0 +1,61 @@
+From: Felix Fietkau <nbd@nbd.name>
+Date: Thu, 15 Mar 2018 20:50:37 +0100
+Subject: [PATCH] net: bridge: support hardware flow table offload
+
+Look up the real device and pass it on
+
+Signed-off-by: Felix Fietkau <nbd@nbd.name>
+---
+
+--- a/net/bridge/br_device.c
++++ b/net/bridge/br_device.c
+@@ -18,6 +18,10 @@
+ #include <linux/ethtool.h>
+ #include <linux/list.h>
+ #include <linux/netfilter_bridge.h>
++#if IS_ENABLED(CONFIG_NF_FLOW_TABLE)
++#include <linux/netfilter.h>
++#include <net/netfilter/nf_flow_table.h>
++#endif
+ 
+ #include <linux/uaccess.h>
+ #include "br_private.h"
+@@ -376,6 +380,28 @@ static const struct ethtool_ops br_ethto
+ 	.get_link	= ethtool_op_get_link,
+ };
+ 
++#if IS_ENABLED(CONFIG_NF_FLOW_TABLE)
++static int br_flow_offload_check(struct flow_offload_hw_path *path)
++{
++	struct net_device *dev = path->dev;
++	struct net_bridge *br = netdev_priv(dev);
++	struct net_bridge_fdb_entry *dst;
++
++	if (!(path->flags & FLOW_OFFLOAD_PATH_ETHERNET))
++		return -EINVAL;
++
++	dst = br_fdb_find_rcu(br, path->eth_dest, path->vlan_id);
++	if (!dst || !dst->dst)
++		return -ENOENT;
++
++	path->dev = dst->dst->dev;
++	if (path->dev->netdev_ops->ndo_flow_offload_check)
++		return path->dev->netdev_ops->ndo_flow_offload_check(path);
++
++	return 0;
++}
++#endif /* CONFIG_NF_FLOW_TABLE */
++
+ static const struct net_device_ops br_netdev_ops = {
+ 	.ndo_open		 = br_dev_open,
+ 	.ndo_stop		 = br_dev_stop,
+@@ -403,6 +429,9 @@ static const struct net_device_ops br_ne
+ 	.ndo_bridge_setlink	 = br_setlink,
+ 	.ndo_bridge_dellink	 = br_dellink,
+ 	.ndo_features_check	 = passthru_features_check,
++#if IS_ENABLED(CONFIG_NF_FLOW_TABLE)
++	.ndo_flow_offload_check	 = br_flow_offload_check,
++#endif
+ };
+ 
+ static struct device_type br_type = {
diff --git a/target/linux/generic/pending-5.4/644-net-pppoe-support-hardware-flow-table-offload.patch b/target/linux/generic/pending-5.4/644-net-pppoe-support-hardware-flow-table-offload.patch
new file mode 100644
index 0000000000..26d46ec005
--- /dev/null
+++ b/target/linux/generic/pending-5.4/644-net-pppoe-support-hardware-flow-table-offload.patch
@@ -0,0 +1,125 @@
+From: Felix Fietkau <nbd@nbd.name>
+Date: Thu, 15 Mar 2018 21:15:00 +0100
+Subject: [PATCH] net: pppoe: support hardware flow table offload
+
+Pass on the PPPoE session ID and the remote MAC address
+
+Signed-off-by: Felix Fietkau <nbd@nbd.name>
+---
+
+--- a/drivers/net/ppp/ppp_generic.c
++++ b/drivers/net/ppp/ppp_generic.c
+@@ -57,6 +57,11 @@
+ #include <net/net_namespace.h>
+ #include <net/netns/generic.h>
+ 
++#if IS_ENABLED(CONFIG_NF_FLOW_TABLE)
++#include <linux/netfilter.h>
++#include <net/netfilter/nf_flow_table.h>
++#endif
++
+ #define PPP_VERSION	"2.4.2"
+ 
+ /*
+@@ -1368,12 +1373,37 @@ static void ppp_dev_priv_destructor(stru
+ 		ppp_destroy_interface(ppp);
+ }
+ 
++#if IS_ENABLED(CONFIG_NF_FLOW_TABLE)
++static int ppp_flow_offload_check(struct flow_offload_hw_path *path)
++{
++	struct ppp *ppp = netdev_priv(path->dev);
++	struct ppp_channel *chan;
++	struct channel *pch;
++
++	if (ppp->flags & SC_MULTILINK)
++		return -EOPNOTSUPP;
++
++	if (list_empty(&ppp->channels))
++		return -ENODEV;
++
++	pch = list_first_entry(&ppp->channels, struct channel, clist);
++	chan = pch->chan;
++	if (!chan->ops->flow_offload_check)
++		return -EOPNOTSUPP;
++
++	return chan->ops->flow_offload_check(chan, path);
++}
++#endif /* CONFIG_NF_FLOW_TABLE */
++
+ static const struct net_device_ops ppp_netdev_ops = {
+ 	.ndo_init	 = ppp_dev_init,
+ 	.ndo_uninit      = ppp_dev_uninit,
+ 	.ndo_start_xmit  = ppp_start_xmit,
+ 	.ndo_do_ioctl    = ppp_net_ioctl,
+ 	.ndo_get_stats64 = ppp_get_stats64,
++#if IS_ENABLED(CONFIG_NF_FLOW_TABLE)
++	.ndo_flow_offload_check = ppp_flow_offload_check,
++#endif
+ };
+ 
+ static struct device_type ppp_type = {
+--- a/drivers/net/ppp/pppoe.c
++++ b/drivers/net/ppp/pppoe.c
+@@ -78,6 +78,11 @@
+ #include <linux/proc_fs.h>
+ #include <linux/seq_file.h>
+ 
++#if IS_ENABLED(CONFIG_NF_FLOW_TABLE)
++#include <linux/netfilter.h>
++#include <net/netfilter/nf_flow_table.h>
++#endif
++
+ #include <linux/nsproxy.h>
+ #include <net/net_namespace.h>
+ #include <net/netns/generic.h>
+@@ -976,8 +981,36 @@ static int pppoe_xmit(struct ppp_channel
+ 	return __pppoe_xmit(sk, skb);
+ }
+ 
++#if IS_ENABLED(CONFIG_NF_FLOW_TABLE)
++static int pppoe_flow_offload_check(struct ppp_channel *chan,
++				    struct flow_offload_hw_path *path)
++{
++	struct sock *sk = (struct sock *)chan->private;
++	struct pppox_sock *po = pppox_sk(sk);
++	struct net_device *dev = po->pppoe_dev;
++
++	if (sock_flag(sk, SOCK_DEAD) ||
++	    !(sk->sk_state & PPPOX_CONNECTED) || !dev)
++		return -ENODEV;
++
++	path->dev = po->pppoe_dev;
++	path->flags |= FLOW_OFFLOAD_PATH_PPPOE;
++	memcpy(path->eth_src, po->pppoe_dev->dev_addr, ETH_ALEN);
++	memcpy(path->eth_dest, po->pppoe_pa.remote, ETH_ALEN);
++	path->pppoe_sid = be16_to_cpu(po->num);
++
++	if (path->dev->netdev_ops->ndo_flow_offload_check)
++		return path->dev->netdev_ops->ndo_flow_offload_check(path);
++
++	return 0;
++}
++#endif /* CONFIG_NF_FLOW_TABLE */
++
+ static const struct ppp_channel_ops pppoe_chan_ops = {
+ 	.start_xmit = pppoe_xmit,
++#if IS_ENABLED(CONFIG_NF_FLOW_TABLE)
++	.flow_offload_check = pppoe_flow_offload_check,
++#endif
+ };
+ 
+ static int pppoe_recvmsg(struct socket *sock, struct msghdr *m,
+--- a/include/linux/ppp_channel.h
++++ b/include/linux/ppp_channel.h
+@@ -32,6 +32,10 @@ struct ppp_channel_ops {
+ 	int	(*start_xmit)(struct ppp_channel *, struct sk_buff *);
+ 	/* Handle an ioctl call that has come in via /dev/ppp. */
+ 	int	(*ioctl)(struct ppp_channel *, unsigned int, unsigned long);
++
++#if IS_ENABLED(CONFIG_NF_FLOW_TABLE)
++	int	(*flow_offload_check)(struct ppp_channel *, struct flow_offload_hw_path *);
++#endif
+ };
+ 
+ struct ppp_channel {
diff --git a/target/linux/generic/pending-5.4/645-netfilter-nf_flow_table-rework-hardware-offload-time.patch b/target/linux/generic/pending-5.4/645-netfilter-nf_flow_table-rework-hardware-offload-time.patch
new file mode 100644
index 0000000000..bfb7a9c190
--- /dev/null
+++ b/target/linux/generic/pending-5.4/645-netfilter-nf_flow_table-rework-hardware-offload-time.patch
@@ -0,0 +1,37 @@
+From: Felix Fietkau <nbd@nbd.name>
+Date: Sun, 25 Mar 2018 21:10:55 +0200
+Subject: [PATCH] netfilter: nf_flow_table: rework hardware offload timeout
+ handling
+
+Some offload implementations send keepalive packets + explicit
+notifications of TCP FIN/RST packets. In this case it is more convenient
+to simply let the driver update flow->timeout handling and use the
+regular flow offload gc step.
+
+For drivers that manage their own lifetime, a separate flag can be set
+to avoid gc timeouts.
+
+Signed-off-by: Felix Fietkau <nbd@nbd.name>
+---
+
+--- a/include/net/netfilter/nf_flow_table.h
++++ b/include/net/netfilter/nf_flow_table.h
+@@ -76,6 +76,7 @@ struct flow_offload_tuple_rhash {
+ #define FLOW_OFFLOAD_DYING	0x4
+ #define FLOW_OFFLOAD_TEARDOWN	0x8
+ #define FLOW_OFFLOAD_HW		0x10
++#define FLOW_OFFLOAD_KEEP	0x20
+ 
+ struct flow_offload {
+ 	struct flow_offload_tuple_rhash		tuplehash[FLOW_OFFLOAD_DIR_MAX];
+--- a/net/netfilter/nf_flow_table_core.c
++++ b/net/netfilter/nf_flow_table_core.c
+@@ -368,7 +368,7 @@ static int nf_flow_offload_gc_step(struc
+ 		if (!teardown)
+ 			nf_ct_offload_timeout(flow);
+ 
+-		if (nf_flow_in_hw(flow) && !teardown)
++		if ((flow->flags & FLOW_OFFLOAD_KEEP) && !teardown)
+ 			continue;
+ 
+ 		if (nf_flow_has_expired(flow) || teardown)
diff --git a/target/linux/generic/pending-5.4/646-netfilter-nf_flow_table-rework-private-driver-data.patch b/target/linux/generic/pending-5.4/646-netfilter-nf_flow_table-rework-private-driver-data.patch
new file mode 100644
index 0000000000..f94d7ad301
--- /dev/null
+++ b/target/linux/generic/pending-5.4/646-netfilter-nf_flow_table-rework-private-driver-data.patch
@@ -0,0 +1,25 @@
+From: Felix Fietkau <nbd@nbd.name>
+Date: Fri, 27 Apr 2018 14:42:14 +0200
+Subject: [PATCH] netfilter: nf_flow_table: rework private driver data
+
+Move the timeout out of the union, since it can be shared between the
+driver and the stack. Add a private pointer that the driver can use to
+point to its own data structures
+
+Signed-off-by: Felix Fietkau <nbd@nbd.name>
+---
+
+--- a/include/net/netfilter/nf_flow_table.h
++++ b/include/net/netfilter/nf_flow_table.h
+@@ -81,9 +81,10 @@ struct flow_offload_tuple_rhash {
+ struct flow_offload {
+ 	struct flow_offload_tuple_rhash		tuplehash[FLOW_OFFLOAD_DIR_MAX];
+ 	u32					flags;
++	u32					timeout;
+ 	union {
+ 		/* Your private driver data here. */
+-		u32		timeout;
++		void *priv;
+ 	};
+ };
+ 
diff --git a/target/linux/generic/pending-5.4/655-increase_skb_pad.patch b/target/linux/generic/pending-5.4/655-increase_skb_pad.patch
new file mode 100644
index 0000000000..94e325b0cc
--- /dev/null
+++ b/target/linux/generic/pending-5.4/655-increase_skb_pad.patch
@@ -0,0 +1,20 @@
+From: Felix Fietkau <nbd@nbd.name>
+Subject: kernel: add a few patches for avoiding unnecessary skb reallocations - significantly improves ethernet<->wireless performance
+
+lede-commit: 6f89cffc9add6939d44a6b54cf9a5e77849aa7fd
+Signed-off-by: Felix Fietkau <nbd@nbd.name>
+---
+ include/linux/skbuff.h | 2 +-
+ 1 file changed, 1 insertion(+), 1 deletion(-)
+
+--- a/include/linux/skbuff.h
++++ b/include/linux/skbuff.h
+@@ -2511,7 +2511,7 @@ static inline int pskb_network_may_pull(
+  * NET_IP_ALIGN(2) + ethernet_header(14) + IP_header(20/40) + ports(8)
+  */
+ #ifndef NET_SKB_PAD
+-#define NET_SKB_PAD	max(32, L1_CACHE_BYTES)
++#define NET_SKB_PAD	max(64, L1_CACHE_BYTES)
+ #endif
+ 
+ int ___pskb_trim(struct sk_buff *skb, unsigned int len);
diff --git a/target/linux/generic/pending-5.4/666-Add-support-for-MAP-E-FMRs-mesh-mode.patch b/target/linux/generic/pending-5.4/666-Add-support-for-MAP-E-FMRs-mesh-mode.patch
new file mode 100644
index 0000000000..8b7594e9cf
--- /dev/null
+++ b/target/linux/generic/pending-5.4/666-Add-support-for-MAP-E-FMRs-mesh-mode.patch
@@ -0,0 +1,500 @@
+From: Steven Barth <steven@midlink.org>
+Subject: Add support for MAP-E FMRs (mesh mode)
+
+MAP-E FMRs (draft-ietf-softwire-map-10) are rules for IPv4-communication
+between MAP CEs (mesh mode) without the need to forward such data to a
+border relay. This is similar to how 6rd works but for IPv4 over IPv6.
+
+Signed-off-by: Steven Barth <cyrus@openwrt.org>
+---
+ include/net/ip6_tunnel.h       |  13 ++
+ include/uapi/linux/if_tunnel.h |  13 ++
+ net/ipv6/ip6_tunnel.c          | 276 +++++++++++++++++++++++++++++++++++++++--
+ 3 files changed, 291 insertions(+), 11 deletions(-)
+
+--- a/include/net/ip6_tunnel.h
++++ b/include/net/ip6_tunnel.h
+@@ -18,6 +18,18 @@
+ /* determine capability on a per-packet basis */
+ #define IP6_TNL_F_CAP_PER_PACKET 0x40000
+ 
++/* IPv6 tunnel FMR */
++struct __ip6_tnl_fmr {
++	struct __ip6_tnl_fmr *next; /* next fmr in list */
++	struct in6_addr ip6_prefix;
++	struct in_addr ip4_prefix;
++
++	__u8 ip6_prefix_len;
++	__u8 ip4_prefix_len;
++	__u8 ea_len;
++	__u8 offset;
++};
++
+ struct __ip6_tnl_parm {
+ 	char name[IFNAMSIZ];	/* name of tunnel device */
+ 	int link;		/* ifindex of underlying L2 interface */
+@@ -29,6 +41,7 @@ struct __ip6_tnl_parm {
+ 	__u32 flags;		/* tunnel flags */
+ 	struct in6_addr laddr;	/* local tunnel end-point address */
+ 	struct in6_addr raddr;	/* remote tunnel end-point address */
++	struct __ip6_tnl_fmr *fmrs;	/* FMRs */
+ 
+ 	__be16			i_flags;
+ 	__be16			o_flags;
+--- a/include/uapi/linux/if_tunnel.h
++++ b/include/uapi/linux/if_tunnel.h
+@@ -77,10 +77,23 @@ enum {
+ 	IFLA_IPTUN_ENCAP_DPORT,
+ 	IFLA_IPTUN_COLLECT_METADATA,
+ 	IFLA_IPTUN_FWMARK,
++	IFLA_IPTUN_FMRS,
+ 	__IFLA_IPTUN_MAX,
+ };
+ #define IFLA_IPTUN_MAX	(__IFLA_IPTUN_MAX - 1)
+ 
++enum {
++	IFLA_IPTUN_FMR_UNSPEC,
++	IFLA_IPTUN_FMR_IP6_PREFIX,
++	IFLA_IPTUN_FMR_IP4_PREFIX,
++	IFLA_IPTUN_FMR_IP6_PREFIX_LEN,
++	IFLA_IPTUN_FMR_IP4_PREFIX_LEN,
++	IFLA_IPTUN_FMR_EA_LEN,
++	IFLA_IPTUN_FMR_OFFSET,
++	__IFLA_IPTUN_FMR_MAX,
++};
++#define IFLA_IPTUN_FMR_MAX (__IFLA_IPTUN_FMR_MAX - 1)
++
+ enum tunnel_encap_types {
+ 	TUNNEL_ENCAP_NONE,
+ 	TUNNEL_ENCAP_FOU,
+--- a/net/ipv6/ip6_tunnel.c
++++ b/net/ipv6/ip6_tunnel.c
+@@ -16,6 +16,8 @@
+  *      as published by the Free Software Foundation; either version
+  *      2 of the License, or (at your option) any later version.
+  *
++ *	Changes:
++ * Steven Barth <cyrus@openwrt.org>:		MAP-E FMR support
+  */
+ 
+ #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+@@ -72,9 +74,9 @@ static bool log_ecn_error = true;
+ module_param(log_ecn_error, bool, 0644);
+ MODULE_PARM_DESC(log_ecn_error, "Log packets received with corrupted ECN");
+ 
+-static u32 HASH(const struct in6_addr *addr1, const struct in6_addr *addr2)
++static u32 HASH(const struct in6_addr *addr)
+ {
+-	u32 hash = ipv6_addr_hash(addr1) ^ ipv6_addr_hash(addr2);
++	u32 hash = ipv6_addr_hash(addr);
+ 
+ 	return hash_32(hash, IP6_TUNNEL_HASH_SIZE_SHIFT);
+ }
+@@ -141,20 +143,29 @@ static struct net_device_stats *ip6_get_
+ static struct ip6_tnl *
+ ip6_tnl_lookup(struct net *net, const struct in6_addr *remote, const struct in6_addr *local)
+ {
+-	unsigned int hash = HASH(remote, local);
++	unsigned int hash = HASH(local);
+ 	struct ip6_tnl *t;
+ 	struct ip6_tnl_net *ip6n = net_generic(net, ip6_tnl_net_id);
+ 	struct in6_addr any;
++	struct __ip6_tnl_fmr *fmr;
+ 
+ 	for_each_ip6_tunnel_rcu(ip6n->tnls_r_l[hash]) {
+-		if (ipv6_addr_equal(local, &t->parms.laddr) &&
+-		    ipv6_addr_equal(remote, &t->parms.raddr) &&
+-		    (t->dev->flags & IFF_UP))
++		if (!ipv6_addr_equal(local, &t->parms.laddr) ||
++				!(t->dev->flags & IFF_UP))
++			continue;
++
++		if (ipv6_addr_equal(remote, &t->parms.raddr))
+ 			return t;
++
++		for (fmr = t->parms.fmrs; fmr; fmr = fmr->next) {
++			if (ipv6_prefix_equal(remote, &fmr->ip6_prefix,
++					fmr->ip6_prefix_len))
++				return t;
++		}
+ 	}
+ 
+ 	memset(&any, 0, sizeof(any));
+-	hash = HASH(&any, local);
++	hash = HASH(local);
+ 	for_each_ip6_tunnel_rcu(ip6n->tnls_r_l[hash]) {
+ 		if (ipv6_addr_equal(local, &t->parms.laddr) &&
+ 		    ipv6_addr_any(&t->parms.raddr) &&
+@@ -162,7 +173,7 @@ ip6_tnl_lookup(struct net *net, const st
+ 			return t;
+ 	}
+ 
+-	hash = HASH(remote, &any);
++	hash = HASH(&any);
+ 	for_each_ip6_tunnel_rcu(ip6n->tnls_r_l[hash]) {
+ 		if (ipv6_addr_equal(remote, &t->parms.raddr) &&
+ 		    ipv6_addr_any(&t->parms.laddr) &&
+@@ -202,7 +213,7 @@ ip6_tnl_bucket(struct ip6_tnl_net *ip6n,
+ 
+ 	if (!ipv6_addr_any(remote) || !ipv6_addr_any(local)) {
+ 		prio = 1;
+-		h = HASH(remote, local);
++		h = HASH(local);
+ 	}
+ 	return &ip6n->tnls[prio][h];
+ }
+@@ -383,6 +394,12 @@ ip6_tnl_dev_uninit(struct net_device *de
+ 	struct net *net = t->net;
+ 	struct ip6_tnl_net *ip6n = net_generic(net, ip6_tnl_net_id);
+ 
++	while (t->parms.fmrs) {
++		struct __ip6_tnl_fmr *next = t->parms.fmrs->next;
++		kfree(t->parms.fmrs);
++		t->parms.fmrs = next;
++	}
++
+ 	if (dev == ip6n->fb_tnl_dev)
+ 		RCU_INIT_POINTER(ip6n->tnls_wc[0], NULL);
+ 	else
+@@ -772,6 +789,107 @@ int ip6_tnl_rcv_ctl(struct ip6_tnl *t,
+ }
+ EXPORT_SYMBOL_GPL(ip6_tnl_rcv_ctl);
+ 
++/**
++ * ip4ip6_fmr_calc - calculate target / source IPv6-address based on FMR
++ *   @dest: destination IPv6 address buffer
++ *   @skb: received socket buffer
++ *   @fmr: MAP FMR
++ *   @xmit: Calculate for xmit or rcv
++ **/
++static void ip4ip6_fmr_calc(struct in6_addr *dest,
++		const struct iphdr *iph, const uint8_t *end,
++		const struct __ip6_tnl_fmr *fmr, bool xmit)
++{
++	int psidlen = fmr->ea_len - (32 - fmr->ip4_prefix_len);
++	u8 *portp = NULL;
++	bool use_dest_addr;
++	const struct iphdr *dsth = iph;
++
++	if ((u8*)dsth >= end)
++		return;
++
++	/* find significant IP header */
++	if (iph->protocol == IPPROTO_ICMP) {
++		struct icmphdr *ih = (struct icmphdr*)(((u8*)dsth) + dsth->ihl * 4);
++		if (ih && ((u8*)&ih[1]) <= end && (
++			ih->type == ICMP_DEST_UNREACH ||
++			ih->type == ICMP_SOURCE_QUENCH ||
++			ih->type == ICMP_TIME_EXCEEDED ||
++			ih->type == ICMP_PARAMETERPROB ||
++			ih->type == ICMP_REDIRECT))
++				dsth = (const struct iphdr*)&ih[1];
++	}
++
++	/* in xmit-path use dest port by default and source port only if
++		this is an ICMP reply to something else; vice versa in rcv-path */
++	use_dest_addr = (xmit && dsth == iph) || (!xmit && dsth != iph);
++
++	/* get dst port */
++	if (((u8*)&dsth[1]) <= end && (
++		dsth->protocol == IPPROTO_UDP ||
++		dsth->protocol == IPPROTO_TCP ||
++		dsth->protocol == IPPROTO_SCTP ||
++		dsth->protocol == IPPROTO_DCCP)) {
++			/* for UDP, TCP, SCTP and DCCP source and dest port
++			follow IPv4 header directly */
++			portp = ((u8*)dsth) + dsth->ihl * 4;
++
++			if (use_dest_addr)
++				portp += sizeof(u16);
++	} else if (iph->protocol == IPPROTO_ICMP) {
++		struct icmphdr *ih = (struct icmphdr*)(((u8*)dsth) + dsth->ihl * 4);
++
++		/* use icmp identifier as port */
++		if (((u8*)&ih) <= end && (
++		    (use_dest_addr && (
++		    ih->type == ICMP_ECHOREPLY ||
++			ih->type == ICMP_TIMESTAMPREPLY ||
++			ih->type == ICMP_INFO_REPLY ||
++			ih->type == ICMP_ADDRESSREPLY)) ||
++			(!use_dest_addr && (
++			ih->type == ICMP_ECHO ||
++			ih->type == ICMP_TIMESTAMP ||
++			ih->type == ICMP_INFO_REQUEST ||
++			ih->type == ICMP_ADDRESS)
++			)))
++				portp = (u8*)&ih->un.echo.id;
++	}
++
++	if ((portp && &portp[2] <= end) || psidlen == 0) {
++		int frombyte = fmr->ip6_prefix_len / 8;
++		int fromrem = fmr->ip6_prefix_len % 8;
++		int bytes = sizeof(struct in6_addr) - frombyte;
++		const u32 *addr = (use_dest_addr) ? &iph->daddr : &iph->saddr;
++		u64 eabits = ((u64)ntohl(*addr)) << (32 + fmr->ip4_prefix_len);
++		u64 t = 0;
++
++		/* extract PSID from port and add it to eabits */
++		u16 psidbits = 0;
++		if (psidlen > 0) {
++			psidbits = ((u16)portp[0]) << 8 | ((u16)portp[1]);
++			psidbits >>= 16 - psidlen - fmr->offset;
++			psidbits = (u16)(psidbits << (16 - psidlen));
++			eabits |= ((u64)psidbits) << (48 - (fmr->ea_len - psidlen));
++		}
++
++		/* rewrite destination address */
++		*dest = fmr->ip6_prefix;
++		memcpy(&dest->s6_addr[10], addr, sizeof(*addr));
++		dest->s6_addr16[7] = htons(psidbits >> (16 - psidlen));
++
++		if (bytes > sizeof(u64))
++			bytes = sizeof(u64);
++
++		/* insert eabits */
++		memcpy(&t, &dest->s6_addr[frombyte], bytes);
++		t = be64_to_cpu(t) & ~(((((u64)1) << fmr->ea_len) - 1)
++			<< (64 - fmr->ea_len - fromrem));
++		t = cpu_to_be64(t | (eabits >> fromrem));
++		memcpy(&dest->s6_addr[frombyte], &t, bytes);
++	}
++}
++
++
+ static int __ip6_tnl_rcv(struct ip6_tnl *tunnel, struct sk_buff *skb,
+ 			 const struct tnl_ptk_info *tpi,
+ 			 struct metadata_dst *tun_dst,
+@@ -824,6 +942,27 @@ static int __ip6_tnl_rcv(struct ip6_tnl
+ 	skb_reset_network_header(skb);
+ 	memset(skb->cb, 0, sizeof(struct inet6_skb_parm));
+ 
++	if (tpi->proto == htons(ETH_P_IP) && tunnel->parms.fmrs &&
++		!ipv6_addr_equal(&ipv6h->saddr, &tunnel->parms.raddr)) {
++			/* Packet didn't come from BR, so lookup FMR */
++			struct __ip6_tnl_fmr *fmr;
++			struct in6_addr expected = tunnel->parms.raddr;
++			for (fmr = tunnel->parms.fmrs; fmr; fmr = fmr->next)
++				if (ipv6_prefix_equal(&ipv6h->saddr,
++					&fmr->ip6_prefix, fmr->ip6_prefix_len))
++						break;
++
++			/* Check that IPv6 matches IPv4 source to prevent spoofing */
++			if (fmr)
++				ip4ip6_fmr_calc(&expected, ip_hdr(skb),
++						skb_tail_pointer(skb), fmr, false);
++
++			if (!ipv6_addr_equal(&ipv6h->saddr, &expected)) {
++				rcu_read_unlock();
++				goto drop;
++			}
++	}
++
+ 	__skb_tunnel_rx(skb, tunnel->dev, tunnel->net);
+ 
+ 	err = dscp_ecn_decapsulate(tunnel, ipv6h, skb);
+@@ -956,6 +1095,7 @@ static void init_tel_txopt(struct ipv6_t
+ 	opt->ops.opt_nflen = 8;
+ }
+ 
++
+ /**
+  * ip6_tnl_addr_conflict - compare packet addresses to tunnel's own
+  *   @t: the outgoing tunnel device
+@@ -1308,6 +1448,7 @@ ip6ip6_tnl_xmit(struct sk_buff *skb, str
+ {
+ 	struct ip6_tnl *t = netdev_priv(dev);
+ 	struct ipv6hdr *ipv6h;
++	struct __ip6_tnl_fmr *fmr;
+ 	int encap_limit = -1;
+ 	__u16 offset;
+ 	struct flowi6 fl6;
+@@ -1373,6 +1514,18 @@ ip6ip6_tnl_xmit(struct sk_buff *skb, str
+ 	fl6.flowi6_uid = sock_net_uid(dev_net(dev), NULL);
+ 	dsfield = INET_ECN_encapsulate(dsfield, ipv6_get_dsfield(ipv6h));
+ 
++	/* try to find matching FMR */
++	for (fmr = t->parms.fmrs; fmr; fmr = fmr->next) {
++		unsigned mshift = 32 - fmr->ip4_prefix_len;
++		if (ntohl(fmr->ip4_prefix.s_addr) >> mshift ==
++				ntohl(ip_hdr(skb)->daddr) >> mshift)
++			break;
++	}
++
++	/* change dstaddr according to FMR */
++	if (fmr)
++		ip4ip6_fmr_calc(&fl6.daddr, ip_hdr(skb), skb_tail_pointer(skb), fmr, true);
++
+ 	if (iptunnel_handle_offloads(skb, SKB_GSO_IPXIP6))
+ 		return -1;
+ 
+@@ -1502,6 +1655,14 @@ ip6_tnl_change(struct ip6_tnl *t, const
+ 	t->parms.link = p->link;
+ 	t->parms.proto = p->proto;
+ 	t->parms.fwmark = p->fwmark;
++
++	while (t->parms.fmrs) {
++		struct __ip6_tnl_fmr *next = t->parms.fmrs->next;
++		kfree(t->parms.fmrs);
++		t->parms.fmrs = next;
++	}
++	t->parms.fmrs = p->fmrs;
++
+ 	dst_cache_reset(&t->dst_cache);
+ 	ip6_tnl_link_config(t);
+ 	return 0;
+@@ -1540,6 +1701,7 @@ ip6_tnl_parm_from_user(struct __ip6_tnl_
+ 	p->flowinfo = u->flowinfo;
+ 	p->link = u->link;
+ 	p->proto = u->proto;
++	p->fmrs = NULL;
+ 	memcpy(p->name, u->name, sizeof(u->name));
+ }
+ 
+@@ -1924,6 +2086,15 @@ static int ip6_tnl_validate(struct nlatt
+ 	return 0;
+ }
+ 
++static const struct nla_policy ip6_tnl_fmr_policy[IFLA_IPTUN_FMR_MAX + 1] = {
++	[IFLA_IPTUN_FMR_IP6_PREFIX] = { .len = sizeof(struct in6_addr) },
++	[IFLA_IPTUN_FMR_IP4_PREFIX] = { .len = sizeof(struct in_addr) },
++	[IFLA_IPTUN_FMR_IP6_PREFIX_LEN] = { .type = NLA_U8 },
++	[IFLA_IPTUN_FMR_IP4_PREFIX_LEN] = { .type = NLA_U8 },
++	[IFLA_IPTUN_FMR_EA_LEN] = { .type = NLA_U8 },
++	[IFLA_IPTUN_FMR_OFFSET] = { .type = NLA_U8 }
++};
++
+ static void ip6_tnl_netlink_parms(struct nlattr *data[],
+ 				  struct __ip6_tnl_parm *parms)
+ {
+@@ -1961,6 +2132,46 @@ static void ip6_tnl_netlink_parms(struct
+ 
+ 	if (data[IFLA_IPTUN_FWMARK])
+ 		parms->fwmark = nla_get_u32(data[IFLA_IPTUN_FWMARK]);
++
++	if (data[IFLA_IPTUN_FMRS]) {
++		unsigned rem;
++		struct nlattr *fmr;
++		nla_for_each_nested(fmr, data[IFLA_IPTUN_FMRS], rem) {
++			struct nlattr *fmrd[IFLA_IPTUN_FMR_MAX + 1], *c;
++			struct __ip6_tnl_fmr *nfmr;
++
++			nla_parse_nested(fmrd, IFLA_IPTUN_FMR_MAX,
++				fmr, ip6_tnl_fmr_policy, NULL);
++
++			if (!(nfmr = kzalloc(sizeof(*nfmr), GFP_KERNEL)))
++				continue;
++
++			nfmr->offset = 6;
++
++			if ((c = fmrd[IFLA_IPTUN_FMR_IP6_PREFIX]))
++				nla_memcpy(&nfmr->ip6_prefix, fmrd[IFLA_IPTUN_FMR_IP6_PREFIX],
++					sizeof(nfmr->ip6_prefix));
++
++			if ((c = fmrd[IFLA_IPTUN_FMR_IP4_PREFIX]))
++				nla_memcpy(&nfmr->ip4_prefix, fmrd[IFLA_IPTUN_FMR_IP4_PREFIX],
++					sizeof(nfmr->ip4_prefix));
++
++			if ((c = fmrd[IFLA_IPTUN_FMR_IP6_PREFIX_LEN]))
++				nfmr->ip6_prefix_len = nla_get_u8(c);
++
++			if ((c = fmrd[IFLA_IPTUN_FMR_IP4_PREFIX_LEN]))
++				nfmr->ip4_prefix_len = nla_get_u8(c);
++
++			if ((c = fmrd[IFLA_IPTUN_FMR_EA_LEN]))
++				nfmr->ea_len = nla_get_u8(c);
++
++			if ((c = fmrd[IFLA_IPTUN_FMR_OFFSET]))
++				nfmr->offset = nla_get_u8(c);
++
++			nfmr->next = parms->fmrs;
++			parms->fmrs = nfmr;
++		}
++	}
+ }
+ 
+ static bool ip6_tnl_netlink_encap_parms(struct nlattr *data[],
+@@ -2076,6 +2287,12 @@ static void ip6_tnl_dellink(struct net_d
+ 
+ static size_t ip6_tnl_get_size(const struct net_device *dev)
+ {
++	const struct ip6_tnl *t = netdev_priv(dev);
++	struct __ip6_tnl_fmr *c;
++	int fmrs = 0;
++	for (c = t->parms.fmrs; c; c = c->next)
++		++fmrs;
++
+ 	return
+ 		/* IFLA_IPTUN_LINK */
+ 		nla_total_size(4) +
+@@ -2105,6 +2322,24 @@ static size_t ip6_tnl_get_size(const str
+ 		nla_total_size(0) +
+ 		/* IFLA_IPTUN_FWMARK */
+ 		nla_total_size(4) +
++		/* IFLA_IPTUN_FMRS */
++		nla_total_size(0) +
++		(
++			/* nest */
++			nla_total_size(0) +
++			/* IFLA_IPTUN_FMR_IP6_PREFIX */
++			nla_total_size(sizeof(struct in6_addr)) +
++			/* IFLA_IPTUN_FMR_IP4_PREFIX */
++			nla_total_size(sizeof(struct in_addr)) +
++			/* IFLA_IPTUN_FMR_EA_LEN */
++			nla_total_size(1) +
++			/* IFLA_IPTUN_FMR_IP6_PREFIX_LEN */
++			nla_total_size(1) +
++			/* IFLA_IPTUN_FMR_IP4_PREFIX_LEN */
++			nla_total_size(1) +
++			/* IFLA_IPTUN_FMR_OFFSET */
++			nla_total_size(1)
++		) * fmrs +
+ 		0;
+ }
+ 
+@@ -2112,6 +2347,9 @@ static int ip6_tnl_fill_info(struct sk_b
+ {
+ 	struct ip6_tnl *tunnel = netdev_priv(dev);
+ 	struct __ip6_tnl_parm *parm = &tunnel->parms;
++	struct __ip6_tnl_fmr *c;
++	int fmrcnt = 0;
++	struct nlattr *fmrs;
+ 
+ 	if (nla_put_u32(skb, IFLA_IPTUN_LINK, parm->link) ||
+ 	    nla_put_in6_addr(skb, IFLA_IPTUN_LOCAL, &parm->laddr) ||
+@@ -2121,9 +2359,27 @@ static int ip6_tnl_fill_info(struct sk_b
+ 	    nla_put_be32(skb, IFLA_IPTUN_FLOWINFO, parm->flowinfo) ||
+ 	    nla_put_u32(skb, IFLA_IPTUN_FLAGS, parm->flags) ||
+ 	    nla_put_u8(skb, IFLA_IPTUN_PROTO, parm->proto) ||
+-	    nla_put_u32(skb, IFLA_IPTUN_FWMARK, parm->fwmark))
++	    nla_put_u32(skb, IFLA_IPTUN_FWMARK, parm->fwmark) ||
++	    !(fmrs = nla_nest_start(skb, IFLA_IPTUN_FMRS)))
+ 		goto nla_put_failure;
+ 
++	for (c = parm->fmrs; c; c = c->next) {
++		struct nlattr *fmr = nla_nest_start(skb, ++fmrcnt);
++		if (!fmr ||
++			nla_put(skb, IFLA_IPTUN_FMR_IP6_PREFIX,
++				sizeof(c->ip6_prefix), &c->ip6_prefix) ||
++			nla_put(skb, IFLA_IPTUN_FMR_IP4_PREFIX,
++				sizeof(c->ip4_prefix), &c->ip4_prefix) ||
++			nla_put_u8(skb, IFLA_IPTUN_FMR_IP6_PREFIX_LEN, c->ip6_prefix_len) ||
++			nla_put_u8(skb, IFLA_IPTUN_FMR_IP4_PREFIX_LEN, c->ip4_prefix_len) ||
++			nla_put_u8(skb, IFLA_IPTUN_FMR_EA_LEN, c->ea_len) ||
++			nla_put_u8(skb, IFLA_IPTUN_FMR_OFFSET, c->offset))
++				goto nla_put_failure;
++
++		nla_nest_end(skb, fmr);
++	}
++	nla_nest_end(skb, fmrs);
++
+ 	if (nla_put_u16(skb, IFLA_IPTUN_ENCAP_TYPE, tunnel->encap.type) ||
+ 	    nla_put_be16(skb, IFLA_IPTUN_ENCAP_SPORT, tunnel->encap.sport) ||
+ 	    nla_put_be16(skb, IFLA_IPTUN_ENCAP_DPORT, tunnel->encap.dport) ||
+@@ -2163,6 +2419,7 @@ static const struct nla_policy ip6_tnl_p
+ 	[IFLA_IPTUN_ENCAP_DPORT]	= { .type = NLA_U16 },
+ 	[IFLA_IPTUN_COLLECT_METADATA]	= { .type = NLA_FLAG },
+ 	[IFLA_IPTUN_FWMARK]		= { .type = NLA_U32 },
++	[IFLA_IPTUN_FMRS]		= { .type = NLA_NESTED },
+ };
+ 
+ static struct rtnl_link_ops ip6_link_ops __read_mostly = {
diff --git a/target/linux/generic/pending-5.4/670-ipv6-allow-rejecting-with-source-address-failed-policy.patch b/target/linux/generic/pending-5.4/670-ipv6-allow-rejecting-with-source-address-failed-policy.patch
new file mode 100644
index 0000000000..c35aca8a18
--- /dev/null
+++ b/target/linux/generic/pending-5.4/670-ipv6-allow-rejecting-with-source-address-failed-policy.patch
@@ -0,0 +1,247 @@
+From: Jonas Gorski <jogo@openwrt.org>
+Subject: ipv6: allow rejecting with "source address failed policy"
+
+RFC6204 L-14 requires rejecting traffic from invalid addresses with
+ICMPv6 Destination Unreachable, Code 5 (Source address failed ingress/
+egress policy) on the LAN side, so add an appropriate rule for that.
+
+Signed-off-by: Jonas Gorski <jogo@openwrt.org>
+---
+ include/net/netns/ipv6.h       |  1 +
+ include/uapi/linux/fib_rules.h |  4 +++
+ include/uapi/linux/rtnetlink.h |  1 +
+ net/ipv4/fib_semantics.c       |  4 +++
+ net/ipv4/fib_trie.c            |  1 +
+ net/ipv4/ipmr.c                |  1 +
+ net/ipv6/fib6_rules.c          |  4 +++
+ net/ipv6/ip6mr.c               |  2 ++
+ net/ipv6/route.c               | 58 +++++++++++++++++++++++++++++++++++++++++-
+ 9 files changed, 75 insertions(+), 1 deletion(-)
+
+--- a/include/net/netns/ipv6.h
++++ b/include/net/netns/ipv6.h
+@@ -78,6 +78,7 @@ struct netns_ipv6 {
+ 	unsigned int		fib6_rules_require_fldissect;
+ 	bool			fib6_has_custom_rules;
+ 	struct rt6_info         *ip6_prohibit_entry;
++	struct rt6_info		*ip6_policy_failed_entry;
+ 	struct rt6_info         *ip6_blk_hole_entry;
+ 	struct fib6_table       *fib6_local_tbl;
+ 	struct fib_rules_ops    *fib6_rules_ops;
+--- a/include/uapi/linux/fib_rules.h
++++ b/include/uapi/linux/fib_rules.h
+@@ -82,6 +82,10 @@ enum {
+ 	FR_ACT_BLACKHOLE,	/* Drop without notification */
+ 	FR_ACT_UNREACHABLE,	/* Drop with ENETUNREACH */
+ 	FR_ACT_PROHIBIT,	/* Drop with EACCES */
++	FR_ACT_RES9,
++	FR_ACT_RES10,
++	FR_ACT_RES11,
++	FR_ACT_POLICY_FAILED,	/* Drop with EACCES */
+ 	__FR_ACT_MAX,
+ };
+ 
+--- a/include/uapi/linux/rtnetlink.h
++++ b/include/uapi/linux/rtnetlink.h
+@@ -228,6 +228,7 @@ enum {
+ 	RTN_THROW,		/* Not in this table		*/
+ 	RTN_NAT,		/* Translate this address	*/
+ 	RTN_XRESOLVE,		/* Use external resolver	*/
++	RTN_POLICY_FAILED,	/* Failed ingress/egress policy */
+ 	__RTN_MAX
+ };
+ 
+--- a/net/ipv4/fib_semantics.c
++++ b/net/ipv4/fib_semantics.c
+@@ -139,6 +139,10 @@ const struct fib_prop fib_props[RTN_MAX
+ 		.error	= -EINVAL,
+ 		.scope	= RT_SCOPE_NOWHERE,
+ 	},
++	[RTN_POLICY_FAILED] = {
++		.error	= -EACCES,
++		.scope	= RT_SCOPE_UNIVERSE,
++	},
+ };
+ 
+ static void rt_fibinfo_free(struct rtable __rcu **rtp)
+--- a/net/ipv4/fib_trie.c
++++ b/net/ipv4/fib_trie.c
+@@ -2474,6 +2474,7 @@ static const char *const rtn_type_names[
+ 	[RTN_THROW] = "THROW",
+ 	[RTN_NAT] = "NAT",
+ 	[RTN_XRESOLVE] = "XRESOLVE",
++	[RTN_POLICY_FAILED] = "POLICY_FAILED",
+ };
+ 
+ static inline const char *rtn_type(char *buf, size_t len, unsigned int t)
+--- a/net/ipv4/ipmr.c
++++ b/net/ipv4/ipmr.c
+@@ -179,6 +179,7 @@ static int ipmr_rule_action(struct fib_r
+ 	case FR_ACT_UNREACHABLE:
+ 		return -ENETUNREACH;
+ 	case FR_ACT_PROHIBIT:
++	case FR_ACT_POLICY_FAILED:
+ 		return -EACCES;
+ 	case FR_ACT_BLACKHOLE:
+ 	default:
+--- a/net/ipv6/fib6_rules.c
++++ b/net/ipv6/fib6_rules.c
+@@ -221,6 +221,10 @@ static int __fib6_rule_action(struct fib
+ 		err = -EACCES;
+ 		rt = net->ipv6.ip6_prohibit_entry;
+ 		goto discard_pkt;
++	case FR_ACT_POLICY_FAILED:
++		err = -EACCES;
++		rt = net->ipv6.ip6_policy_failed_entry;
++		goto discard_pkt;
+ 	}
+ 
+ 	tb_id = fib_rule_get_table(rule, arg);
+--- a/net/ipv6/ip6mr.c
++++ b/net/ipv6/ip6mr.c
+@@ -162,6 +162,8 @@ static int ip6mr_rule_action(struct fib_
+ 		return -ENETUNREACH;
+ 	case FR_ACT_PROHIBIT:
+ 		return -EACCES;
++	case FR_ACT_POLICY_FAILED:
++		return -EACCES;
+ 	case FR_ACT_BLACKHOLE:
+ 	default:
+ 		return -EINVAL;
+--- a/net/ipv6/route.c
++++ b/net/ipv6/route.c
+@@ -97,6 +97,8 @@ static int		ip6_pkt_discard(struct sk_bu
+ static int		ip6_pkt_discard_out(struct net *net, struct sock *sk, struct sk_buff *skb);
+ static int		ip6_pkt_prohibit(struct sk_buff *skb);
+ static int		ip6_pkt_prohibit_out(struct net *net, struct sock *sk, struct sk_buff *skb);
++static int		ip6_pkt_policy_failed(struct sk_buff *skb);
++static int		ip6_pkt_policy_failed_out(struct net *net, struct sock *sk, struct sk_buff *skb);
+ static void		ip6_link_failure(struct sk_buff *skb);
+ static void		ip6_rt_update_pmtu(struct dst_entry *dst, struct sock *sk,
+ 					   struct sk_buff *skb, u32 mtu,
+@@ -328,6 +330,18 @@ static const struct rt6_info ip6_prohibi
+ 	.rt6i_flags	= (RTF_REJECT | RTF_NONEXTHOP),
+ };
+ 
++static const struct rt6_info ip6_policy_failed_entry_template = {
++	.dst = {
++		.__refcnt	= ATOMIC_INIT(1),
++		.__use		= 1,
++		.obsolete	= DST_OBSOLETE_FORCE_CHK,
++		.error		= -EACCES,
++		.input		= ip6_pkt_policy_failed,
++		.output		= ip6_pkt_policy_failed_out,
++	},
++	.rt6i_flags	= (RTF_REJECT | RTF_NONEXTHOP),
++};
++
+ static const struct rt6_info ip6_blk_hole_entry_template = {
+ 	.dst = {
+ 		.__refcnt	= ATOMIC_INIT(1),
+@@ -906,6 +920,7 @@ static const int fib6_prop[RTN_MAX + 1]
+ 	[RTN_BLACKHOLE]	= -EINVAL,
+ 	[RTN_UNREACHABLE] = -EHOSTUNREACH,
+ 	[RTN_PROHIBIT]	= -EACCES,
++	[RTN_POLICY_FAILED] = -EACCES,
+ 	[RTN_THROW]	= -EAGAIN,
+ 	[RTN_NAT]	= -EINVAL,
+ 	[RTN_XRESOLVE]	= -EINVAL,
+@@ -943,6 +958,10 @@ static void ip6_rt_init_dst_reject(struc
+ 		rt->dst.output = ip6_pkt_prohibit_out;
+ 		rt->dst.input = ip6_pkt_prohibit;
+ 		break;
++	case RTN_POLICY_FAILED:
++		rt->dst.output = ip6_pkt_policy_failed_out;
++		rt->dst.input = ip6_pkt_policy_failed;
++		break;
+ 	case RTN_THROW:
+ 	case RTN_UNREACHABLE:
+ 	default:
+@@ -3789,6 +3808,17 @@ static int ip6_pkt_prohibit_out(struct n
+ 	return ip6_pkt_drop(skb, ICMPV6_ADM_PROHIBITED, IPSTATS_MIB_OUTNOROUTES);
+ }
+ 
++static int ip6_pkt_policy_failed(struct sk_buff *skb)
++{
++	return ip6_pkt_drop(skb, ICMPV6_POLICY_FAIL, IPSTATS_MIB_INNOROUTES);
++}
++
++static int ip6_pkt_policy_failed_out(struct net *net, struct sock *sk, struct sk_buff *skb)
++{
++	skb->dev = skb_dst(skb)->dev;
++	return ip6_pkt_drop(skb, ICMPV6_POLICY_FAIL, IPSTATS_MIB_OUTNOROUTES);
++}
++
+ /*
+  *	Allocate a dst for local (unicast / anycast) address.
+  */
+@@ -4236,7 +4266,8 @@ static int rtm_to_fib6_config(struct sk_
+ 	if (rtm->rtm_type == RTN_UNREACHABLE ||
+ 	    rtm->rtm_type == RTN_BLACKHOLE ||
+ 	    rtm->rtm_type == RTN_PROHIBIT ||
+-	    rtm->rtm_type == RTN_THROW)
++	    rtm->rtm_type == RTN_THROW ||
++	    rtm->rtm_type == RTN_POLICY_FAILED)
+ 		cfg->fc_flags |= RTF_REJECT;
+ 
+ 	if (rtm->rtm_type == RTN_LOCAL)
+@@ -5084,6 +5115,8 @@ static int ip6_route_dev_notify(struct n
+ #ifdef CONFIG_IPV6_MULTIPLE_TABLES
+ 		net->ipv6.ip6_prohibit_entry->dst.dev = dev;
+ 		net->ipv6.ip6_prohibit_entry->rt6i_idev = in6_dev_get(dev);
++		net->ipv6.ip6_policy_failed_entry->dst.dev = dev;
++		net->ipv6.ip6_policy_failed_entry->rt6i_idev = in6_dev_get(dev);
+ 		net->ipv6.ip6_blk_hole_entry->dst.dev = dev;
+ 		net->ipv6.ip6_blk_hole_entry->rt6i_idev = in6_dev_get(dev);
+ #endif
+@@ -5095,6 +5128,7 @@ static int ip6_route_dev_notify(struct n
+ 		in6_dev_put_clear(&net->ipv6.ip6_null_entry->rt6i_idev);
+ #ifdef CONFIG_IPV6_MULTIPLE_TABLES
+ 		in6_dev_put_clear(&net->ipv6.ip6_prohibit_entry->rt6i_idev);
++		in6_dev_put_clear(&net->ipv6.ip6_policy_failed_entry->rt6i_idev);
+ 		in6_dev_put_clear(&net->ipv6.ip6_blk_hole_entry->rt6i_idev);
+ #endif
+ 	}
+@@ -5289,6 +5323,15 @@ static int __net_init ip6_route_net_init
+ 	net->ipv6.ip6_blk_hole_entry->dst.ops = &net->ipv6.ip6_dst_ops;
+ 	dst_init_metrics(&net->ipv6.ip6_blk_hole_entry->dst,
+ 			 ip6_template_metrics, true);
++
++	net->ipv6.ip6_policy_failed_entry =
++		kmemdup(&ip6_policy_failed_entry_template,
++			sizeof(*net->ipv6.ip6_policy_failed_entry), GFP_KERNEL);
++	if (!net->ipv6.ip6_policy_failed_entry)
++		goto out_ip6_blk_hole_entry;
++	net->ipv6.ip6_policy_failed_entry->dst.ops = &net->ipv6.ip6_dst_ops;
++	dst_init_metrics(&net->ipv6.ip6_policy_failed_entry->dst,
++			 ip6_template_metrics, true);
+ #endif
+ 
+ 	net->ipv6.sysctl.flush_delay = 0;
+@@ -5307,6 +5350,8 @@ out:
+ 	return ret;
+ 
+ #ifdef CONFIG_IPV6_MULTIPLE_TABLES
++out_ip6_blk_hole_entry:
++	kfree(net->ipv6.ip6_blk_hole_entry);
+ out_ip6_prohibit_entry:
+ 	kfree(net->ipv6.ip6_prohibit_entry);
+ out_ip6_null_entry:
+@@ -5327,6 +5372,7 @@ static void __net_exit ip6_route_net_exi
+ #ifdef CONFIG_IPV6_MULTIPLE_TABLES
+ 	kfree(net->ipv6.ip6_prohibit_entry);
+ 	kfree(net->ipv6.ip6_blk_hole_entry);
++	kfree(net->ipv6.ip6_policy_failed_entry);
+ #endif
+ 	dst_entries_destroy(&net->ipv6.ip6_dst_ops);
+ }
+@@ -5403,6 +5449,9 @@ void __init ip6_route_init_special_entri
+ 	init_net.ipv6.ip6_prohibit_entry->rt6i_idev = in6_dev_get(init_net.loopback_dev);
+ 	init_net.ipv6.ip6_blk_hole_entry->dst.dev = init_net.loopback_dev;
+ 	init_net.ipv6.ip6_blk_hole_entry->rt6i_idev = in6_dev_get(init_net.loopback_dev);
++	init_net.ipv6.ip6_policy_failed_entry->dst.dev = init_net.loopback_dev;
++	init_net.ipv6.ip6_policy_failed_entry->rt6i_idev =
++		in6_dev_get(init_net.loopback_dev);
+   #endif
+ }
+ 
diff --git a/target/linux/generic/pending-5.4/671-net-provide-defines-for-_POLICY_FAILED-until-all-cod.patch b/target/linux/generic/pending-5.4/671-net-provide-defines-for-_POLICY_FAILED-until-all-cod.patch
new file mode 100644
index 0000000000..85adfedc94
--- /dev/null
+++ b/target/linux/generic/pending-5.4/671-net-provide-defines-for-_POLICY_FAILED-until-all-cod.patch
@@ -0,0 +1,50 @@
+From: Jonas Gorski <jogo@openwrt.org>
+Subject: net: provide defines for _POLICY_FAILED until all code is updated
+
+Upstream introduced ICMPV6_POLICY_FAIL for code 5 of destination
+unreachable, conflicting with our name.
+
+Add appropriate defines to allow our code to build with the new
+name until we have updated our local patches for older kernels
+and userspace packages.
+
+Signed-off-by: Jonas Gorski <jogo@openwrt.org>
+---
+ include/uapi/linux/fib_rules.h | 2 ++
+ include/uapi/linux/icmpv6.h    | 2 ++
+ include/uapi/linux/rtnetlink.h | 2 ++
+ 3 files changed, 6 insertions(+)
+
+--- a/include/uapi/linux/fib_rules.h
++++ b/include/uapi/linux/fib_rules.h
+@@ -89,6 +89,8 @@ enum {
+ 	__FR_ACT_MAX,
+ };
+ 
++#define FR_ACT_FAILED_POLICY FR_ACT_POLICY_FAILED
++
+ #define FR_ACT_MAX (__FR_ACT_MAX - 1)
+ 
+ #endif
+--- a/include/uapi/linux/icmpv6.h
++++ b/include/uapi/linux/icmpv6.h
+@@ -119,6 +119,8 @@ struct icmp6hdr {
+ #define ICMPV6_POLICY_FAIL		5
+ #define ICMPV6_REJECT_ROUTE		6
+ 
++#define ICMPV6_FAILED_POLICY		ICMPV6_POLICY_FAIL
++
+ /*
+  *	Codes for Time Exceeded
+  */
+--- a/include/uapi/linux/rtnetlink.h
++++ b/include/uapi/linux/rtnetlink.h
+@@ -232,6 +232,8 @@ enum {
+ 	__RTN_MAX
+ };
+ 
++#define RTN_FAILED_POLICY RTN_POLICY_FAILED
++
+ #define RTN_MAX (__RTN_MAX - 1)
+ 
+ 
diff --git a/target/linux/generic/pending-5.4/680-NET-skip-GRO-for-foreign-MAC-addresses.patch b/target/linux/generic/pending-5.4/680-NET-skip-GRO-for-foreign-MAC-addresses.patch
new file mode 100644
index 0000000000..61cc4e830a
--- /dev/null
+++ b/target/linux/generic/pending-5.4/680-NET-skip-GRO-for-foreign-MAC-addresses.patch
@@ -0,0 +1,152 @@
+From: Felix Fietkau <nbd@nbd.name>
+Subject: net: replace GRO optimization patch with a new one that supports VLANs/bridges with different MAC addresses
+
+Signed-off-by: Felix Fietkau <nbd@nbd.name>
+---
+ include/linux/netdevice.h |  2 ++
+ include/linux/skbuff.h    |  3 ++-
+ net/core/dev.c            | 48 +++++++++++++++++++++++++++++++++++++++++++++++
+ net/ethernet/eth.c        | 18 +++++++++++++++++-
+ 4 files changed, 69 insertions(+), 2 deletions(-)
+
+--- a/include/linux/netdevice.h
++++ b/include/linux/netdevice.h
+@@ -1891,6 +1891,8 @@ struct net_device {
+ 	struct netdev_hw_addr_list	mc;
+ 	struct netdev_hw_addr_list	dev_addrs;
+ 
++	unsigned char		local_addr_mask[MAX_ADDR_LEN];
++
+ #ifdef CONFIG_SYSFS
+ 	struct kset		*queues_kset;
+ #endif
+--- a/include/linux/skbuff.h
++++ b/include/linux/skbuff.h
+@@ -799,6 +799,7 @@ struct sk_buff {
+ #ifdef CONFIG_TLS_DEVICE
+ 	__u8			decrypted:1;
+ #endif
++	__u8			gro_skip:1;
+ 
+ #ifdef CONFIG_NET_SCHED
+ 	__u16			tc_index;	/* traffic control index */
+--- a/net/core/dev.c
++++ b/net/core/dev.c
+@@ -5454,6 +5454,9 @@ static enum gro_result dev_gro_receive(s
+ 	int same_flow;
+ 	int grow;
+ 
++	if (skb->gro_skip)
++		goto normal;
++
+ 	if (netif_elide_gro(skb->dev))
+ 		goto normal;
+ 
+@@ -7112,6 +7115,48 @@ static void __netdev_adjacent_dev_unlink
+ 					   &upper_dev->adj_list.lower);
+ }
+ 
++static void __netdev_addr_mask(unsigned char *mask, const unsigned char *addr,
++			       struct net_device *dev)
++{
++	int i;
++
++	for (i = 0; i < dev->addr_len; i++)
++		mask[i] |= addr[i] ^ dev->dev_addr[i];
++}
++
++static void __netdev_upper_mask(unsigned char *mask, struct net_device *dev,
++				struct net_device *lower)
++{
++	struct net_device *cur;
++	struct list_head *iter;
++
++	netdev_for_each_upper_dev_rcu(dev, cur, iter) {
++		__netdev_addr_mask(mask, cur->dev_addr, lower);
++		__netdev_upper_mask(mask, cur, lower);
++	}
++}
++
++static void __netdev_update_addr_mask(struct net_device *dev)
++{
++	unsigned char mask[MAX_ADDR_LEN];
++	struct net_device *cur;
++	struct list_head *iter;
++
++	memset(mask, 0, sizeof(mask));
++	__netdev_upper_mask(mask, dev, dev);
++	memcpy(dev->local_addr_mask, mask, dev->addr_len);
++
++	netdev_for_each_lower_dev(dev, cur, iter)
++		__netdev_update_addr_mask(cur);
++}
++
++static void netdev_update_addr_mask(struct net_device *dev)
++{
++	rcu_read_lock();
++	__netdev_update_addr_mask(dev);
++	rcu_read_unlock();
++}
++
+ static int __netdev_upper_dev_link(struct net_device *dev,
+ 				   struct net_device *upper_dev, bool master,
+ 				   void *upper_priv, void *upper_info,
+@@ -7162,6 +7207,7 @@ static int __netdev_upper_dev_link(struc
+ 	if (ret)
+ 		return ret;
+ 
++	netdev_update_addr_mask(dev);
+ 	ret = call_netdevice_notifiers_info(NETDEV_CHANGEUPPER,
+ 					    &changeupper_info.info);
+ 	ret = notifier_to_errno(ret);
+@@ -7254,6 +7300,7 @@ void netdev_upper_dev_unlink(struct net_
+ 
+ 	__netdev_adjacent_dev_unlink_neighbour(dev, upper_dev);
+ 
++	netdev_update_addr_mask(dev);
+ 	call_netdevice_notifiers_info(NETDEV_CHANGEUPPER,
+ 				      &changeupper_info.info);
+ 
+@@ -7893,6 +7940,7 @@ int dev_set_mac_address(struct net_devic
+ 	if (err)
+ 		return err;
+ 	dev->addr_assign_type = NET_ADDR_SET;
++	netdev_update_addr_mask(dev);
+ 	call_netdevice_notifiers(NETDEV_CHANGEADDR, dev);
+ 	add_device_randomness(dev->dev_addr, dev->addr_len);
+ 	return 0;
+--- a/net/ethernet/eth.c
++++ b/net/ethernet/eth.c
+@@ -144,6 +144,18 @@ u32 eth_get_headlen(void *data, unsigned
+ }
+ EXPORT_SYMBOL(eth_get_headlen);
+ 
++static inline bool
++eth_check_local_mask(const void *addr1, const void *addr2, const void *mask)
++{
++	const u16 *a1 = addr1;
++	const u16 *a2 = addr2;
++	const u16 *m = mask;
++
++	return (((a1[0] ^ a2[0]) & ~m[0]) |
++		((a1[1] ^ a2[1]) & ~m[1]) |
++		((a1[2] ^ a2[2]) & ~m[2]));
++}
++
+ /**
+  * eth_type_trans - determine the packet's protocol ID.
+  * @skb: received socket data
+@@ -172,8 +184,12 @@ __be16 eth_type_trans(struct sk_buff *sk
+ 			skb->pkt_type = PACKET_MULTICAST;
+ 	}
+ 	else if (unlikely(!ether_addr_equal_64bits(eth->h_dest,
+-						   dev->dev_addr)))
++						   dev->dev_addr))) {
+ 		skb->pkt_type = PACKET_OTHERHOST;
++		if (eth_check_local_mask(eth->h_dest, dev->dev_addr,
++					 dev->local_addr_mask))
++			skb->gro_skip = 1;
++	}
+ 
+ 	/*
+ 	 * Some variants of DSA tagging don't have an ethertype field
diff --git a/target/linux/generic/pending-5.4/681-NET-add-of_get_mac_address_mtd.patch b/target/linux/generic/pending-5.4/681-NET-add-of_get_mac_address_mtd.patch
new file mode 100644
index 0000000000..13f5640590
--- /dev/null
+++ b/target/linux/generic/pending-5.4/681-NET-add-of_get_mac_address_mtd.patch
@@ -0,0 +1,133 @@
+From: John Crispin <blogic@openwrt.org>
+Subject: NET: add mtd-mac-address support to of_get_mac_address()
+
+Many embedded devices have information such as mac addresses stored inside mtd
+devices. This patch allows us to add a property inside a node describing a
+network interface. The new property points at a mtd partition with an offset
+where the mac address can be found.
+
+Signed-off-by: John Crispin <blogic@openwrt.org>
+Signed-off-by: Felix Fietkau <nbd@nbd.name>
+---
+ drivers/of/of_net.c    |   37 +++++++++++++++++++++++++++++++++++++
+ include/linux/of_net.h |    1 +
+ 2 files changed, 38 insertions(+)
+
+--- a/drivers/of/of_net.c
++++ b/drivers/of/of_net.c
+@@ -11,6 +11,7 @@
+ #include <linux/of_net.h>
+ #include <linux/phy.h>
+ #include <linux/export.h>
++#include <linux/mtd/mtd.h>
+ 
+ /**
+  * of_get_phy_mode - Get phy mode for given device_node
+@@ -39,7 +40,7 @@ int of_get_phy_mode(struct device_node *
+ }
+ EXPORT_SYMBOL_GPL(of_get_phy_mode);
+ 
+-static const void *of_get_mac_addr(struct device_node *np, const char *name)
++static void *of_get_mac_addr(struct device_node *np, const char *name)
+ {
+ 	struct property *pp = of_find_property(np, name, NULL);
+ 
+@@ -48,6 +49,79 @@ static const void *of_get_mac_addr(struc
+ 	return NULL;
+ }
+ 
++static const void *of_get_mac_address_mtd(struct device_node *np)
++{
++#ifdef CONFIG_MTD
++	struct device_node *mtd_np = NULL;
++	struct property *prop;
++	size_t retlen;
++	int size, ret;
++	struct mtd_info *mtd;
++	const char *part;
++	const __be32 *list;
++	phandle phandle;
++	u32 mac_inc = 0;
++	u8 mac[ETH_ALEN];
++	void *addr;
++	u32 inc_idx;
++
++	list = of_get_property(np, "mtd-mac-address", &size);
++	if (!list || (size != (2 * sizeof(*list))))
++		return NULL;
++
++	phandle = be32_to_cpup(list++);
++	if (phandle)
++		mtd_np = of_find_node_by_phandle(phandle);
++
++	if (!mtd_np)
++		return NULL;
++
++	part = of_get_property(mtd_np, "label", NULL);
++	if (!part)
++		part = mtd_np->name;
++
++	mtd = get_mtd_device_nm(part);
++	if (IS_ERR(mtd))
++		return NULL;
++
++	ret = mtd_read(mtd, be32_to_cpup(list), 6, &retlen, mac);
++	put_mtd_device(mtd);
++
++	if (of_property_read_u32(np, "mtd-mac-address-increment-byte", &inc_idx))
++		inc_idx = 5;
++	if (inc_idx > 5)
++		return NULL;
++
++	if (!of_property_read_u32(np, "mtd-mac-address-increment", &mac_inc))
++		mac[inc_idx] += mac_inc;
++
++	if (!is_valid_ether_addr(mac))
++		return NULL;
++
++	addr = of_get_mac_addr(np, "mac-address");
++	if (addr) {
++		memcpy(addr, mac, ETH_ALEN);
++		return addr;
++	}
++
++	prop = kzalloc(sizeof(*prop), GFP_KERNEL);
++	if (!prop)
++		return NULL;
++
++	prop->name = "mac-address";
++	prop->length = ETH_ALEN;
++	prop->value = kmemdup(mac, ETH_ALEN, GFP_KERNEL);
++	if (!prop->value || of_add_property(np, prop))
++		goto free;
++
++	return prop->value;
++free:
++	kfree(prop->value);
++	kfree(prop);
++#endif
++	return NULL;
++}
++
+ /**
+  * Search the device tree for the best MAC address to use.  'mac-address' is
+  * checked first, because that is supposed to contain to "most recent" MAC
+@@ -65,11 +139,18 @@ static const void *of_get_mac_addr(struc
+  * addresses.  Some older U-Boots only initialized 'local-mac-address'.  In
+  * this case, the real MAC is in 'local-mac-address', and 'mac-address' exists
+  * but is all zeros.
++ *
++ * If a mtd-mac-address property exists, try to fetch the MAC address from the
++ * specified mtd device, and store it as a 'mac-address' property
+ */
+ const void *of_get_mac_address(struct device_node *np)
+ {
+ 	const void *addr;
+ 
++	addr = of_get_mac_address_mtd(np);
++	if (addr)
++		return addr;
++
+ 	addr = of_get_mac_addr(np, "mac-address");
+ 	if (addr)
+ 		return addr;
diff --git a/target/linux/generic/pending-5.4/703-phy-add-detach-callback-to-struct-phy_driver.patch b/target/linux/generic/pending-5.4/703-phy-add-detach-callback-to-struct-phy_driver.patch
new file mode 100644
index 0000000000..1c180b225b
--- /dev/null
+++ b/target/linux/generic/pending-5.4/703-phy-add-detach-callback-to-struct-phy_driver.patch
@@ -0,0 +1,38 @@
+From: Gabor Juhos <juhosg@openwrt.org>
+Subject: generic: add detach callback to struct phy_driver
+
+lede-commit: fe61fc2d7d0b3fb348b502f68f98243b3ddf5867
+
+Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
+---
+ drivers/net/phy/phy_device.c | 3 +++
+ include/linux/phy.h          | 6 ++++++
+ 2 files changed, 9 insertions(+)
+
+--- a/drivers/net/phy/phy_device.c
++++ b/drivers/net/phy/phy_device.c
+@@ -1201,6 +1201,9 @@ void phy_detach(struct phy_device *phyde
+ 	struct module *ndev_owner = dev->dev.parent->driver->owner;
+ 	struct mii_bus *bus;
+ 
++	if (phydev->drv && phydev->drv->detach)
++		phydev->drv->detach(phydev);
++
+ 	if (phydev->sysfs_links) {
+ 		sysfs_remove_link(&dev->dev.kobj, "phydev");
+ 		sysfs_remove_link(&phydev->mdio.dev.kobj, "attached_dev");
+--- a/include/linux/phy.h
++++ b/include/linux/phy.h
+@@ -567,6 +567,12 @@ struct phy_driver {
+ 	 */
+ 	int (*did_interrupt)(struct phy_device *phydev);
+ 
++	/*
++	 * Called before an ethernet device is detached
++	 * from the PHY.
++	 */
++	void (*detach)(struct phy_device *phydev);
++
+ 	/* Clears up any memory if needed */
+ 	void (*remove)(struct phy_device *phydev);
+ 
diff --git a/target/linux/generic/pending-5.4/735-net-phy-at803x-fix-at8033-sgmii-mode.patch b/target/linux/generic/pending-5.4/735-net-phy-at803x-fix-at8033-sgmii-mode.patch
new file mode 100644
index 0000000000..5c00b8781f
--- /dev/null
+++ b/target/linux/generic/pending-5.4/735-net-phy-at803x-fix-at8033-sgmii-mode.patch
@@ -0,0 +1,51 @@
+From: Roman Yeryomin <roman@advem.lv>
+Subject: kernel: add at803x fix for sgmii mode
+
+Some (possibly broken) bootloaders incorreclty initialize at8033
+phy. This patch enables sgmii autonegotiation mode.
+
+[john@phrozen.org: felix added this to his upstream queue]
+
+Signed-off-by: Roman Yeryomin <roman@advem.lv>
+---
+ drivers/net/phy/at803x.c | 25 +++++++++++++++++++++++++
+ 1 file changed, 25 insertions(+)
+
+--- a/drivers/net/phy/at803x.c
++++ b/drivers/net/phy/at803x.c
+@@ -44,6 +44,7 @@
+ #define AT803X_FUNC_DATA			0x4003
+ #define AT803X_REG_CHIP_CONFIG			0x1f
+ #define AT803X_BT_BX_REG_SEL			0x8000
++#define AT803X_SGMII_ANEG_EN			0x1000
+ 
+ #define AT803X_DEBUG_ADDR			0x1D
+ #define AT803X_DEBUG_DATA			0x1E
+@@ -252,6 +253,27 @@ static int at803x_probe(struct phy_devic
+ static int at803x_config_init(struct phy_device *phydev)
+ {
+ 	int ret;
++	u32 v;
++
++	if (phydev->drv->phy_id == ATH8031_PHY_ID &&
++		phydev->interface == PHY_INTERFACE_MODE_SGMII)
++	{
++		v = phy_read(phydev, AT803X_REG_CHIP_CONFIG);
++		/* select SGMII/fiber page */
++		ret = phy_write(phydev, AT803X_REG_CHIP_CONFIG,
++						v & ~AT803X_BT_BX_REG_SEL);
++		if (ret)
++			return ret;
++		/* enable SGMII autonegotiation */
++		ret = phy_write(phydev, MII_BMCR, AT803X_SGMII_ANEG_EN);
++		if (ret)
++			return ret;
++		/* select copper page */
++		ret = phy_write(phydev, AT803X_REG_CHIP_CONFIG,
++						v | AT803X_BT_BX_REG_SEL);
++		if (ret)
++			return ret;
++	}
+ 
+ 	ret = genphy_config_init(phydev);
+ 	if (ret < 0)
diff --git a/target/linux/generic/pending-5.4/739-net-avoid-tx-fault-with-Nokia-GPON-module.patch b/target/linux/generic/pending-5.4/739-net-avoid-tx-fault-with-Nokia-GPON-module.patch
new file mode 100644
index 0000000000..b540e1dbc1
--- /dev/null
+++ b/target/linux/generic/pending-5.4/739-net-avoid-tx-fault-with-Nokia-GPON-module.patch
@@ -0,0 +1,108 @@
+From 283b211aa01bdae94dffb3121655dbb20bf237f4 Mon Sep 17 00:00:00 2001
+From: Russell King <rmk+kernel@armlinux.org.uk>
+Date: Tue, 3 Dec 2019 15:22:05 +0000
+Subject: net: sfp: avoid tx-fault with Nokia GPON module
+
+The Nokia GPON module can hold tx-fault active while it is initialising
+which can take up to 60s. Avoid this causing the module to be declared
+faulty after the SFP MSA defined non-cooled module timeout.
+
+Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
+---
+ drivers/net/phy/sfp.c | 42 ++++++++++++++++++++++++++++++------------
+ 1 file changed, 30 insertions(+), 12 deletions(-)
+
+--- a/drivers/net/phy/sfp.c
++++ b/drivers/net/phy/sfp.c
+@@ -153,10 +153,20 @@ static const enum gpiod_flags gpio_flags
+ 	GPIOD_ASIS,
+ };
+ 
+-#define T_WAIT		msecs_to_jiffies(50)
+-#define T_INIT_JIFFIES	msecs_to_jiffies(300)
+-#define T_RESET_US	10
+-#define T_FAULT_RECOVER	msecs_to_jiffies(1000)
++/* t_start_up (SFF-8431) or t_init (SFF-8472) is the time required for a
++ * non-cooled module to initialise its laser safety circuitry. We wait
++ * an initial T_WAIT period before we check the tx fault to give any PHY
++ * on board (for a copper SFP) time to initialise.
++ */
++#define T_WAIT			msecs_to_jiffies(50)
++#define T_START_UP		msecs_to_jiffies(300)
++#define T_START_UP_BAD_GPON	msecs_to_jiffies(60000)
++
++/* t_reset is the time required to assert the TX_DISABLE signal to reset
++ * an indicated TX_FAULT.
++ */
++#define T_RESET_US		10
++#define T_FAULT_RECOVER		msecs_to_jiffies(1000)
+ 
+ /* SFP module presence detection is poor: the three MOD DEF signals are
+  * the same length on the PCB, which means it's possible for MOD DEF 0 to
+@@ -216,6 +226,7 @@ struct sfp {
+ 
+ 	struct sfp_eeprom_id id;
+ 	unsigned int module_power_mW;
++	unsigned int module_t_start_up;
+ 
+ #if IS_ENABLED(CONFIG_HWMON)
+ 	struct sfp_diag diag;
+@@ -1590,6 +1601,12 @@ static int sfp_sm_mod_probe(struct sfp *
+ 	if (ret < 0)
+ 		return ret;
+ 
++	if (!memcmp(id.base.vendor_name, "ALCATELLUCENT   ", 16) &&
++	    !memcmp(id.base.vendor_pn, "3FE46541AA      ", 16))
++		sfp->module_t_start_up = T_START_UP_BAD_GPON;
++	else
++		sfp->module_t_start_up = T_START_UP;
++
+ 	return 0;
+ }
+ 
+@@ -1795,11 +1812,12 @@ static void sfp_sm_main(struct sfp *sfp,
+ 			break;
+ 
+ 		if (sfp->state & SFP_F_TX_FAULT) {
+-			/* Wait t_init before indicating that the link is up,
+-			 * provided the current state indicates no TX_FAULT. If
+-			 * TX_FAULT clears before this time, that's fine too.
++			/* Wait up to t_init (SFF-8472) or t_start_up (SFF-8431)
++			 * from the TX_DISABLE deassertion for the module to
++			 * initialise, which is indicated by TX_FAULT
++			 * deasserting.
+ 			 */
+-			timeout = T_INIT_JIFFIES;
++			timeout = sfp->module_t_start_up;
+ 			if (timeout > T_WAIT)
+ 				timeout -= T_WAIT;
+ 			else
+@@ -1816,8 +1834,8 @@ static void sfp_sm_main(struct sfp *sfp,
+ 
+ 	case SFP_S_INIT:
+ 		if (event == SFP_E_TIMEOUT && sfp->state & SFP_F_TX_FAULT) {
+-			/* TX_FAULT is still asserted after t_init, so assume
+-			 * there is a fault.
++			/* TX_FAULT is still asserted after t_init or
++			 * or t_start_up, so assume there is a fault.
+ 			 */
+ 			sfp_sm_fault(sfp, SFP_S_INIT_TX_FAULT,
+ 				     sfp->sm_retries == 5);
+@@ -1836,7 +1854,7 @@ static void sfp_sm_main(struct sfp *sfp,
+ 	case SFP_S_INIT_TX_FAULT:
+ 		if (event == SFP_E_TIMEOUT) {
+ 			sfp_module_tx_fault_reset(sfp);
+-			sfp_sm_next(sfp, SFP_S_INIT, T_INIT_JIFFIES);
++			sfp_sm_next(sfp, SFP_S_INIT, sfp->module_t_start_up);
+ 		}
+ 		break;
+ 
+@@ -1860,7 +1878,7 @@ static void sfp_sm_main(struct sfp *sfp,
+ 	case SFP_S_TX_FAULT:
+ 		if (event == SFP_E_TIMEOUT) {
+ 			sfp_module_tx_fault_reset(sfp);
+-			sfp_sm_next(sfp, SFP_S_REINIT, T_INIT_JIFFIES);
++			sfp_sm_next(sfp, SFP_S_REINIT, sfp->module_t_start_up);
+ 		}
+ 		break;
+ 
diff --git a/target/linux/generic/pending-5.4/740-net-sfp-remove-incomplete-100BASE-FX-and-100BASE-LX-.patch b/target/linux/generic/pending-5.4/740-net-sfp-remove-incomplete-100BASE-FX-and-100BASE-LX-.patch
new file mode 100644
index 0000000000..304d9b40bd
--- /dev/null
+++ b/target/linux/generic/pending-5.4/740-net-sfp-remove-incomplete-100BASE-FX-and-100BASE-LX-.patch
@@ -0,0 +1,52 @@
+From 29cd215aaf6c2050c43e4de03aee436c16f90b96 Mon Sep 17 00:00:00 2001
+From: Russell King <rmk+kernel@armlinux.org.uk>
+Date: Thu, 21 Nov 2019 17:27:14 +0000
+Subject: [PATCH 643/660] net: sfp: remove incomplete 100BASE-FX and 100BASE-LX
+ support
+
+The 100BASE-FX and 100BASE-LX support assumes a PHY is present; this
+is probably an incorrect assumption. In any case, sfp_parse_support()
+will fail such a module. Let's stop pretending we support these
+modules.
+
+Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
+---
+ drivers/net/phy/sfp-bus.c |  4 +---
+ drivers/net/phy/sfp.c     | 13 +------------
+ 2 files changed, 2 insertions(+), 15 deletions(-)
+
+--- a/drivers/net/phy/sfp-bus.c
++++ b/drivers/net/phy/sfp-bus.c
+@@ -341,9 +341,7 @@ phy_interface_t sfp_select_interface(str
+ 	if (phylink_test(link_modes, 2500baseX_Full))
+ 		return PHY_INTERFACE_MODE_2500BASEX;
+ 
+-	if (id->base.e1000_base_t ||
+-	    id->base.e100_base_lx ||
+-	    id->base.e100_base_fx)
++	if (id->base.e1000_base_t)
+ 		return PHY_INTERFACE_MODE_SGMII;
+ 
+ 	if (phylink_test(link_modes, 1000baseX_Full))
+--- a/drivers/net/phy/sfp.c
++++ b/drivers/net/phy/sfp.c
+@@ -1424,18 +1424,7 @@ static void sfp_sm_fault(struct sfp *sfp
+ 
+ static void sfp_sm_probe_for_phy(struct sfp *sfp)
+ {
+-	/* Setting the serdes link mode is guesswork: there's no
+-	 * field in the EEPROM which indicates what mode should
+-	 * be used.
+-	 *
+-	 * If it's a gigabit-only fiber module, it probably does
+-	 * not have a PHY, so switch to 802.3z negotiation mode.
+-	 * Otherwise, switch to SGMII mode (which is required to
+-	 * support non-gigabit speeds) and probe for a PHY.
+-	 */
+-	if (sfp->id.base.e1000_base_t ||
+-	    sfp->id.base.e100_base_lx ||
+-	    sfp->id.base.e100_base_fx)
++	if (sfp->id.base.e1000_base_t)
+ 		sfp_sm_probe_phy(sfp);
+ }
+ 
diff --git a/target/linux/generic/pending-5.4/741-net-sfp-derive-interface-mode-from-ethtool-link-mode.patch b/target/linux/generic/pending-5.4/741-net-sfp-derive-interface-mode-from-ethtool-link-mode.patch
new file mode 100644
index 0000000000..f20b66eae7
--- /dev/null
+++ b/target/linux/generic/pending-5.4/741-net-sfp-derive-interface-mode-from-ethtool-link-mode.patch
@@ -0,0 +1,89 @@
+From dc45d9e04572b5cd6d32f51cdf9f62b18022e6dd Mon Sep 17 00:00:00 2001
+From: Russell King <rmk+kernel@armlinux.org.uk>
+Date: Thu, 21 Nov 2019 17:32:59 +0000
+Subject: [PATCH 644/660] net: sfp: derive interface mode from ethtool link
+ modes
+
+We don't need the EEPROM ID to derive the phy interface mode as we can
+derive it merely from the ethtool link modes.  Remove the EEPROM ID
+argument to sfp_select_interface().
+
+Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
+---
+ drivers/net/phy/marvell10g.c |  2 +-
+ drivers/net/phy/phylink.c    |  2 +-
+ drivers/net/phy/sfp-bus.c    | 11 ++++-------
+ include/linux/sfp.h          |  2 --
+ 4 files changed, 6 insertions(+), 11 deletions(-)
+
+--- a/drivers/net/phy/marvell10g.c
++++ b/drivers/net/phy/marvell10g.c
+@@ -227,7 +227,7 @@ static int mv3310_sfp_insert(void *upstr
+ 	phy_interface_t iface;
+ 
+ 	sfp_parse_support(phydev->sfp_bus, id, support);
+-	iface = sfp_select_interface(phydev->sfp_bus, id, support);
++	iface = sfp_select_interface(phydev->sfp_bus, support);
+ 
+ 	if (iface != PHY_INTERFACE_MODE_10GKR) {
+ 		dev_err(&phydev->mdio.dev, "incompatible SFP module inserted\n");
+--- a/drivers/net/phy/phylink.c
++++ b/drivers/net/phy/phylink.c
+@@ -1663,7 +1663,7 @@ static int phylink_sfp_module_insert(voi
+ 
+ 	linkmode_copy(support1, support);
+ 
+-	iface = sfp_select_interface(pl->sfp_bus, id, config.advertising);
++	iface = sfp_select_interface(pl->sfp_bus, config.advertising);
+ 	if (iface == PHY_INTERFACE_MODE_NA) {
+ 		netdev_err(pl->netdev,
+ 			   "selection of interface failed, advertisement %*pb\n",
+--- a/drivers/net/phy/sfp-bus.c
++++ b/drivers/net/phy/sfp-bus.c
+@@ -319,16 +319,12 @@ EXPORT_SYMBOL_GPL(sfp_parse_support);
+ /**
+  * sfp_select_interface() - Select appropriate phy_interface_t mode
+  * @bus: a pointer to the &struct sfp_bus structure for the sfp module
+- * @id: a pointer to the module's &struct sfp_eeprom_id
+  * @link_modes: ethtool link modes mask
+  *
+- * Derive the phy_interface_t mode for the information found in the
+- * module's identifying EEPROM and the link modes mask. There is no
+- * standard or defined way to derive this information, so we decide
+- * based upon the link mode mask.
++ * Derive the phy_interface_t mode for the SFP module from the link
++ * modes mask.
+  */
+ phy_interface_t sfp_select_interface(struct sfp_bus *bus,
+-				     const struct sfp_eeprom_id *id,
+ 				     unsigned long *link_modes)
+ {
+ 	if (phylink_test(link_modes, 10000baseCR_Full) ||
+@@ -341,7 +337,8 @@ phy_interface_t sfp_select_interface(str
+ 	if (phylink_test(link_modes, 2500baseX_Full))
+ 		return PHY_INTERFACE_MODE_2500BASEX;
+ 
+-	if (id->base.e1000_base_t)
++	if (phylink_test(link_modes, 1000baseT_Half) ||
++	    phylink_test(link_modes, 1000baseT_Full))
+ 		return PHY_INTERFACE_MODE_SGMII;
+ 
+ 	if (phylink_test(link_modes, 1000baseX_Full))
+--- a/include/linux/sfp.h
++++ b/include/linux/sfp.h
+@@ -504,7 +504,6 @@ int sfp_parse_port(struct sfp_bus *bus,
+ void sfp_parse_support(struct sfp_bus *bus, const struct sfp_eeprom_id *id,
+ 		       unsigned long *support);
+ phy_interface_t sfp_select_interface(struct sfp_bus *bus,
+-				     const struct sfp_eeprom_id *id,
+ 				     unsigned long *link_modes);
+ 
+ int sfp_get_module_info(struct sfp_bus *bus, struct ethtool_modinfo *modinfo);
+@@ -532,7 +531,6 @@ static inline void sfp_parse_support(str
+ }
+ 
+ static inline phy_interface_t sfp_select_interface(struct sfp_bus *bus,
+-						   const struct sfp_eeprom_id *id,
+ 						   unsigned long *link_modes)
+ {
+ 	return PHY_INTERFACE_MODE_NA;
diff --git a/target/linux/generic/pending-5.4/742-net-sfp-add-more-extended-compliance-codes.patch b/target/linux/generic/pending-5.4/742-net-sfp-add-more-extended-compliance-codes.patch
new file mode 100644
index 0000000000..4ca0ded55d
--- /dev/null
+++ b/target/linux/generic/pending-5.4/742-net-sfp-add-more-extended-compliance-codes.patch
@@ -0,0 +1,251 @@
+From c66a4e76c8554c84e64b9315314576ac403c6641 Mon Sep 17 00:00:00 2001
+From: Russell King <rmk+kernel@armlinux.org.uk>
+Date: Thu, 26 Sep 2019 15:14:18 +0100
+Subject: [PATCH 645/660] net: sfp: add more extended compliance codes
+
+SFF-8024 is used to define various constants re-used in several SFF
+SFP-related specifications.  Split these constants from the enum, and
+rename them to indicate that they're defined by SFF-8024.
+
+Add and use updated SFF-8024 extended compliance code definitions for
+10GBASE-T, 5GBASE-T and 2.5GBASE-T modules.
+
+Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
+---
+ drivers/net/phy/sfp-bus.c | 60 ++++++++++++++++------------
+ drivers/net/phy/sfp.c     |  4 +-
+ include/linux/sfp.h       | 82 ++++++++++++++++++++++++++-------------
+ 3 files changed, 93 insertions(+), 53 deletions(-)
+
+--- a/drivers/net/phy/sfp-bus.c
++++ b/drivers/net/phy/sfp-bus.c
+@@ -123,35 +123,35 @@ int sfp_parse_port(struct sfp_bus *bus,
+ 
+ 	/* port is the physical connector, set this from the connector field. */
+ 	switch (id->base.connector) {
+-	case SFP_CONNECTOR_SC:
+-	case SFP_CONNECTOR_FIBERJACK:
+-	case SFP_CONNECTOR_LC:
+-	case SFP_CONNECTOR_MT_RJ:
+-	case SFP_CONNECTOR_MU:
+-	case SFP_CONNECTOR_OPTICAL_PIGTAIL:
++	case SFF8024_CONNECTOR_SC:
++	case SFF8024_CONNECTOR_FIBERJACK:
++	case SFF8024_CONNECTOR_LC:
++	case SFF8024_CONNECTOR_MT_RJ:
++	case SFF8024_CONNECTOR_MU:
++	case SFF8024_CONNECTOR_OPTICAL_PIGTAIL:
++	case SFF8024_CONNECTOR_MPO_1X12:
++	case SFF8024_CONNECTOR_MPO_2X16:
+ 		port = PORT_FIBRE;
+ 		break;
+ 
+-	case SFP_CONNECTOR_RJ45:
++	case SFF8024_CONNECTOR_RJ45:
+ 		port = PORT_TP;
+ 		break;
+ 
+-	case SFP_CONNECTOR_COPPER_PIGTAIL:
++	case SFF8024_CONNECTOR_COPPER_PIGTAIL:
+ 		port = PORT_DA;
+ 		break;
+ 
+-	case SFP_CONNECTOR_UNSPEC:
++	case SFF8024_CONNECTOR_UNSPEC:
+ 		if (id->base.e1000_base_t) {
+ 			port = PORT_TP;
+ 			break;
+ 		}
+ 		/* fallthrough */
+-	case SFP_CONNECTOR_SG: /* guess */
+-	case SFP_CONNECTOR_MPO_1X12:
+-	case SFP_CONNECTOR_MPO_2X16:
+-	case SFP_CONNECTOR_HSSDC_II:
+-	case SFP_CONNECTOR_NOSEPARATE:
+-	case SFP_CONNECTOR_MXC_2X16:
++	case SFF8024_CONNECTOR_SG: /* guess */
++	case SFF8024_CONNECTOR_HSSDC_II:
++	case SFF8024_CONNECTOR_NOSEPARATE:
++	case SFF8024_CONNECTOR_MXC_2X16:
+ 		port = PORT_OTHER;
+ 		break;
+ 	default:
+@@ -260,22 +260,33 @@ void sfp_parse_support(struct sfp_bus *b
+ 	}
+ 
+ 	switch (id->base.extended_cc) {
+-	case 0x00: /* Unspecified */
++	case SFF8024_ECC_UNSPEC:
+ 		break;
+-	case 0x02: /* 100Gbase-SR4 or 25Gbase-SR */
++	case SFF8024_ECC_100GBASE_SR4_25GBASE_SR:
+ 		phylink_set(modes, 100000baseSR4_Full);
+ 		phylink_set(modes, 25000baseSR_Full);
+ 		break;
+-	case 0x03: /* 100Gbase-LR4 or 25Gbase-LR */
+-	case 0x04: /* 100Gbase-ER4 or 25Gbase-ER */
++	case SFF8024_ECC_100GBASE_LR4_25GBASE_LR:
++	case SFF8024_ECC_100GBASE_ER4_25GBASE_ER:
+ 		phylink_set(modes, 100000baseLR4_ER4_Full);
+ 		break;
+-	case 0x0b: /* 100Gbase-CR4 or 25Gbase-CR CA-L */
+-	case 0x0c: /* 25Gbase-CR CA-S */
+-	case 0x0d: /* 25Gbase-CR CA-N */
++	case SFF8024_ECC_100GBASE_CR4:
+ 		phylink_set(modes, 100000baseCR4_Full);
++		/* fallthrough */
++	case SFF8024_ECC_25GBASE_CR_S:
++	case SFF8024_ECC_25GBASE_CR_N:
+ 		phylink_set(modes, 25000baseCR_Full);
+ 		break;
++	case SFF8024_ECC_10GBASE_T_SFI:
++	case SFF8024_ECC_10GBASE_T_SR:
++		phylink_set(modes, 10000baseT_Full);
++		break;
++	case SFF8024_ECC_5GBASE_T:
++		phylink_set(modes, 5000baseT_Full);
++		break;
++	case SFF8024_ECC_2_5GBASE_T:
++		phylink_set(modes, 2500baseT_Full);
++		break;
+ 	default:
+ 		dev_warn(bus->sfp_dev,
+ 			 "Unknown/unsupported extended compliance code: 0x%02x\n",
+@@ -300,7 +311,7 @@ void sfp_parse_support(struct sfp_bus *b
+ 	 */
+ 	if (bitmap_empty(modes, __ETHTOOL_LINK_MODE_MASK_NBITS)) {
+ 		/* If the encoding and bit rate allows 1000baseX */
+-		if (id->base.encoding == SFP_ENCODING_8B10B && br_nom &&
++		if (id->base.encoding == SFF8024_ENCODING_8B10B && br_nom &&
+ 		    br_min <= 1300 && br_max >= 1200)
+ 			phylink_set(modes, 1000baseX_Full);
+ 	}
+@@ -331,7 +342,8 @@ phy_interface_t sfp_select_interface(str
+ 	    phylink_test(link_modes, 10000baseSR_Full) ||
+ 	    phylink_test(link_modes, 10000baseLR_Full) ||
+ 	    phylink_test(link_modes, 10000baseLRM_Full) ||
+-	    phylink_test(link_modes, 10000baseER_Full))
++	    phylink_test(link_modes, 10000baseER_Full) ||
++	    phylink_test(link_modes, 10000baseT_Full))
+ 		return PHY_INTERFACE_MODE_10GKR;
+ 
+ 	if (phylink_test(link_modes, 2500baseX_Full))
+--- a/drivers/net/phy/sfp.c
++++ b/drivers/net/phy/sfp.c
+@@ -240,7 +240,7 @@ struct sfp {
+ 
+ static bool sff_module_supported(const struct sfp_eeprom_id *id)
+ {
+-	return id->base.phys_id == SFP_PHYS_ID_SFF &&
++	return id->base.phys_id == SFF8024_ID_SFF_8472 &&
+ 	       id->base.phys_ext_id == SFP_PHYS_EXT_ID_SFP;
+ }
+ 
+@@ -251,7 +251,7 @@ static const struct sff_data sff_data =
+ 
+ static bool sfp_module_supported(const struct sfp_eeprom_id *id)
+ {
+-	return id->base.phys_id == SFP_PHYS_ID_SFP &&
++	return id->base.phys_id == SFF8024_ID_SFP &&
+ 	       id->base.phys_ext_id == SFP_PHYS_EXT_ID_SFP;
+ }
+ 
+--- a/include/linux/sfp.h
++++ b/include/linux/sfp.h
+@@ -275,6 +275,61 @@ struct sfp_diag {
+ 	__be16 cal_v_offset;
+ } __packed;
+ 
++/* SFF8024 defined constants */
++enum {
++	SFF8024_ID_UNK			= 0x00,
++	SFF8024_ID_SFF_8472		= 0x02,
++	SFF8024_ID_SFP			= 0x03,
++	SFF8024_ID_DWDM_SFP		= 0x0b,
++	SFF8024_ID_QSFP_8438		= 0x0c,
++	SFF8024_ID_QSFP_8436_8636	= 0x0d,
++	SFF8024_ID_QSFP28_8636		= 0x11,
++
++	SFF8024_ENCODING_UNSPEC		= 0x00,
++	SFF8024_ENCODING_8B10B		= 0x01,
++	SFF8024_ENCODING_4B5B		= 0x02,
++	SFF8024_ENCODING_NRZ		= 0x03,
++	SFF8024_ENCODING_8472_MANCHESTER= 0x04,
++	SFF8024_ENCODING_8472_SONET	= 0x05,
++	SFF8024_ENCODING_8472_64B66B	= 0x06,
++	SFF8024_ENCODING_8436_MANCHESTER= 0x06,
++	SFF8024_ENCODING_8436_SONET	= 0x04,
++	SFF8024_ENCODING_8436_64B66B	= 0x05,
++	SFF8024_ENCODING_256B257B	= 0x07,
++	SFF8024_ENCODING_PAM4		= 0x08,
++
++	SFF8024_CONNECTOR_UNSPEC	= 0x00,
++	/* codes 01-05 not supportable on SFP, but some modules have single SC */
++	SFF8024_CONNECTOR_SC		= 0x01,
++	SFF8024_CONNECTOR_FIBERJACK	= 0x06,
++	SFF8024_CONNECTOR_LC		= 0x07,
++	SFF8024_CONNECTOR_MT_RJ		= 0x08,
++	SFF8024_CONNECTOR_MU		= 0x09,
++	SFF8024_CONNECTOR_SG		= 0x0a,
++	SFF8024_CONNECTOR_OPTICAL_PIGTAIL= 0x0b,
++	SFF8024_CONNECTOR_MPO_1X12	= 0x0c,
++	SFF8024_CONNECTOR_MPO_2X16	= 0x0d,
++	SFF8024_CONNECTOR_HSSDC_II	= 0x20,
++	SFF8024_CONNECTOR_COPPER_PIGTAIL= 0x21,
++	SFF8024_CONNECTOR_RJ45		= 0x22,
++	SFF8024_CONNECTOR_NOSEPARATE	= 0x23,
++	SFF8024_CONNECTOR_MXC_2X16	= 0x24,
++
++	SFF8024_ECC_UNSPEC		= 0x00,
++	SFF8024_ECC_100G_25GAUI_C2M_AOC	= 0x01,
++	SFF8024_ECC_100GBASE_SR4_25GBASE_SR = 0x02,
++	SFF8024_ECC_100GBASE_LR4_25GBASE_LR = 0x03,
++	SFF8024_ECC_100GBASE_ER4_25GBASE_ER = 0x04,
++	SFF8024_ECC_100GBASE_SR10	= 0x05,
++	SFF8024_ECC_100GBASE_CR4	= 0x0b,
++	SFF8024_ECC_25GBASE_CR_S	= 0x0c,
++	SFF8024_ECC_25GBASE_CR_N	= 0x0d,
++	SFF8024_ECC_10GBASE_T_SFI	= 0x16,
++	SFF8024_ECC_10GBASE_T_SR	= 0x1c,
++	SFF8024_ECC_5GBASE_T		= 0x1d,
++	SFF8024_ECC_2_5GBASE_T		= 0x1e,
++};
++
+ /* SFP EEPROM registers */
+ enum {
+ 	SFP_PHYS_ID			= 0x00,
+@@ -309,34 +364,7 @@ enum {
+ 	SFP_SFF8472_COMPLIANCE		= 0x5e,
+ 	SFP_CC_EXT			= 0x5f,
+ 
+-	SFP_PHYS_ID_SFF			= 0x02,
+-	SFP_PHYS_ID_SFP			= 0x03,
+ 	SFP_PHYS_EXT_ID_SFP		= 0x04,
+-	SFP_CONNECTOR_UNSPEC		= 0x00,
+-	/* codes 01-05 not supportable on SFP, but some modules have single SC */
+-	SFP_CONNECTOR_SC		= 0x01,
+-	SFP_CONNECTOR_FIBERJACK		= 0x06,
+-	SFP_CONNECTOR_LC		= 0x07,
+-	SFP_CONNECTOR_MT_RJ		= 0x08,
+-	SFP_CONNECTOR_MU		= 0x09,
+-	SFP_CONNECTOR_SG		= 0x0a,
+-	SFP_CONNECTOR_OPTICAL_PIGTAIL	= 0x0b,
+-	SFP_CONNECTOR_MPO_1X12		= 0x0c,
+-	SFP_CONNECTOR_MPO_2X16		= 0x0d,
+-	SFP_CONNECTOR_HSSDC_II		= 0x20,
+-	SFP_CONNECTOR_COPPER_PIGTAIL	= 0x21,
+-	SFP_CONNECTOR_RJ45		= 0x22,
+-	SFP_CONNECTOR_NOSEPARATE	= 0x23,
+-	SFP_CONNECTOR_MXC_2X16		= 0x24,
+-	SFP_ENCODING_UNSPEC		= 0x00,
+-	SFP_ENCODING_8B10B		= 0x01,
+-	SFP_ENCODING_4B5B		= 0x02,
+-	SFP_ENCODING_NRZ		= 0x03,
+-	SFP_ENCODING_8472_MANCHESTER	= 0x04,
+-	SFP_ENCODING_8472_SONET		= 0x05,
+-	SFP_ENCODING_8472_64B66B	= 0x06,
+-	SFP_ENCODING_256B257B		= 0x07,
+-	SFP_ENCODING_PAM4		= 0x08,
+ 	SFP_OPTIONS_HIGH_POWER_LEVEL	= BIT(13),
+ 	SFP_OPTIONS_PAGING_A2		= BIT(12),
+ 	SFP_OPTIONS_RETIMER		= BIT(11),
diff --git a/target/linux/generic/pending-5.4/743-net-sfp-add-module-start-stop-upstream-notifications.patch b/target/linux/generic/pending-5.4/743-net-sfp-add-module-start-stop-upstream-notifications.patch
new file mode 100644
index 0000000000..c0c3e9e57e
--- /dev/null
+++ b/target/linux/generic/pending-5.4/743-net-sfp-add-module-start-stop-upstream-notifications.patch
@@ -0,0 +1,131 @@
+From f9a5a54b59cb904b37bf7409a43635ab195d0214 Mon Sep 17 00:00:00 2001
+From: Russell King <rmk+kernel@armlinux.org.uk>
+Date: Tue, 19 Nov 2019 10:13:25 +0000
+Subject: [PATCH 646/660] net: sfp: add module start/stop upstream
+ notifications
+
+When dealing with some copper modules, we can't positively know the
+module capabilities are until we have probed the PHY. Without the full
+capabilities, we may end up failing a module that we could otherwise
+drive with a restricted set of capabilities.
+
+An example of this would be a module with a NBASE-T PHY plugged into
+a host that supports phy interface modes 2500BASE-X and SGMII. The
+PHY supports 10GBASE-R, 5000BASE-X, 2500BASE-X, SGMII interface modes,
+which means a subset of the capabilities are compatible with the host.
+
+However, reading the module EEPROM leads us to believe that the module
+only supports ethtool link mode 10GBASE-T, which is incompatible with
+the host - and thus results in the module being rejected.
+
+This patch adds an extra notification which are triggered after the
+SFP module's PHY probe, and a corresponding notification just before
+the PHY is removed.
+
+Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
+---
+ drivers/net/phy/sfp-bus.c | 21 +++++++++++++++++++++
+ drivers/net/phy/sfp.c     |  8 ++++++++
+ drivers/net/phy/sfp.h     |  2 ++
+ include/linux/sfp.h       |  4 ++++
+ 4 files changed, 35 insertions(+)
+
+--- a/drivers/net/phy/sfp-bus.c
++++ b/drivers/net/phy/sfp-bus.c
+@@ -711,6 +711,27 @@ void sfp_module_remove(struct sfp_bus *b
+ }
+ EXPORT_SYMBOL_GPL(sfp_module_remove);
+ 
++int sfp_module_start(struct sfp_bus *bus)
++{
++	const struct sfp_upstream_ops *ops = sfp_get_upstream_ops(bus);
++	int ret = 0;
++
++	if (ops && ops->module_start)
++		ret = ops->module_start(bus->upstream);
++
++	return ret;
++}
++EXPORT_SYMBOL_GPL(sfp_module_start);
++
++void sfp_module_stop(struct sfp_bus *bus)
++{
++	const struct sfp_upstream_ops *ops = sfp_get_upstream_ops(bus);
++
++	if (ops && ops->module_stop)
++		ops->module_stop(bus->upstream);
++}
++EXPORT_SYMBOL_GPL(sfp_module_stop);
++
+ static void sfp_socket_clear(struct sfp_bus *bus)
+ {
+ 	bus->sfp_dev = NULL;
+--- a/drivers/net/phy/sfp.c
++++ b/drivers/net/phy/sfp.c
+@@ -57,6 +57,7 @@ enum {
+ 	SFP_DEV_UP,
+ 
+ 	SFP_S_DOWN = 0,
++	SFP_S_FAIL,
+ 	SFP_S_WAIT,
+ 	SFP_S_INIT,
+ 	SFP_S_INIT_TX_FAULT,
+@@ -120,6 +121,7 @@ static const char *event_to_str(unsigned
+ 
+ static const char * const sm_state_strings[] = {
+ 	[SFP_S_DOWN] = "down",
++	[SFP_S_FAIL] = "fail",
+ 	[SFP_S_WAIT] = "wait",
+ 	[SFP_S_INIT] = "init",
+ 	[SFP_S_INIT_TX_FAULT] = "init_tx_fault",
+@@ -1766,6 +1768,8 @@ static void sfp_sm_main(struct sfp *sfp,
+ 		if (sfp->sm_state == SFP_S_LINK_UP &&
+ 		    sfp->sm_dev_state == SFP_DEV_UP)
+ 			sfp_sm_link_down(sfp);
++		if (sfp->sm_state > SFP_S_INIT)
++			sfp_module_stop(sfp->sfp_bus);
+ 		if (sfp->mod_phy)
+ 			sfp_sm_phy_detach(sfp);
+ 		sfp_module_tx_disable(sfp);
+@@ -1833,6 +1837,10 @@ static void sfp_sm_main(struct sfp *sfp,
+ 			 * clear.  Probe for the PHY and check the LOS state.
+ 			 */
+ 			sfp_sm_probe_for_phy(sfp);
++			if (sfp_module_start(sfp->sfp_bus)) {
++				sfp_sm_next(sfp, SFP_S_FAIL, 0);
++				break;
++			}
+ 			sfp_sm_link_check_los(sfp);
+ 
+ 			/* Reset the fault retry count */
+--- a/drivers/net/phy/sfp.h
++++ b/drivers/net/phy/sfp.h
+@@ -22,6 +22,8 @@ void sfp_link_up(struct sfp_bus *bus);
+ void sfp_link_down(struct sfp_bus *bus);
+ int sfp_module_insert(struct sfp_bus *bus, const struct sfp_eeprom_id *id);
+ void sfp_module_remove(struct sfp_bus *bus);
++int sfp_module_start(struct sfp_bus *bus);
++void sfp_module_stop(struct sfp_bus *bus);
+ int sfp_link_configure(struct sfp_bus *bus, const struct sfp_eeprom_id *id);
+ struct sfp_bus *sfp_register_socket(struct device *dev, struct sfp *sfp,
+ 				    const struct sfp_socket_ops *ops);
+--- a/include/linux/sfp.h
++++ b/include/linux/sfp.h
+@@ -507,6 +507,8 @@ struct sfp_bus;
+  * @module_insert: called after a module has been detected to determine
+  *   whether the module is supported for the upstream device.
+  * @module_remove: called after the module has been removed.
++ * @module_start: called after the PHY probe step
++ * @module_stop: called before the PHY is removed
+  * @link_down: called when the link is non-operational for whatever
+  *   reason.
+  * @link_up: called when the link is operational.
+@@ -520,6 +522,8 @@ struct sfp_upstream_ops {
+ 	void (*detach)(void *priv, struct sfp_bus *bus);
+ 	int (*module_insert)(void *priv, const struct sfp_eeprom_id *id);
+ 	void (*module_remove)(void *priv);
++	int (*module_start)(void *priv);
++	void (*module_stop)(void *priv);
+ 	void (*link_down)(void *priv);
+ 	void (*link_up)(void *priv);
+ 	int (*connect_phy)(void *priv, struct phy_device *);
diff --git a/target/linux/generic/pending-5.4/744-net-sfp-move-phy_start-phy_stop-to-phylink.patch b/target/linux/generic/pending-5.4/744-net-sfp-move-phy_start-phy_stop-to-phylink.patch
new file mode 100644
index 0000000000..a646fcd409
--- /dev/null
+++ b/target/linux/generic/pending-5.4/744-net-sfp-move-phy_start-phy_stop-to-phylink.patch
@@ -0,0 +1,72 @@
+From e2dc261b872a92a055eb2e86ac136baf9b20f2f2 Mon Sep 17 00:00:00 2001
+From: Russell King <rmk+kernel@armlinux.org.uk>
+Date: Thu, 21 Nov 2019 17:21:33 +0000
+Subject: [PATCH 647/660] net: sfp: move phy_start()/phy_stop() to phylink
+
+Move phy_start() and phy_stop() into the module_start and module_stop
+notifications in phylink, rather than having them in the SFP code.
+This gives phylink responsibility for controlling the PHY, rather
+than having SFP start and stop the PHY state machine.
+
+Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
+---
+ drivers/net/phy/phylink.c | 22 ++++++++++++++++++++++
+ drivers/net/phy/sfp.c     |  2 --
+ 2 files changed, 22 insertions(+), 2 deletions(-)
+
+--- a/drivers/net/phy/phylink.c
++++ b/drivers/net/phy/phylink.c
+@@ -1717,6 +1717,26 @@ static int phylink_sfp_module_insert(voi
+ 	return ret;
+ }
+ 
++static int phylink_sfp_module_start(void *upstream)
++{
++	struct phylink *pl = upstream;
++
++	/* If this SFP module has a PHY, start the PHY now. */
++	if (pl->phydev)
++		phy_start(pl->phydev);
++		
++	return 0;
++}
++
++static void phylink_sfp_module_stop(void *upstream)
++{
++	struct phylink *pl = upstream;
++
++	/* If this SFP module has a PHY, stop it. */
++	if (pl->phydev)
++		phy_stop(pl->phydev);
++}
++
+ static void phylink_sfp_link_down(void *upstream)
+ {
+ 	struct phylink *pl = upstream;
+@@ -1752,6 +1772,8 @@ static const struct sfp_upstream_ops sfp
+ 	.attach = phylink_sfp_attach,
+ 	.detach = phylink_sfp_detach,
+ 	.module_insert = phylink_sfp_module_insert,
++	.module_start = phylink_sfp_module_start,
++	.module_stop = phylink_sfp_module_stop,
+ 	.link_up = phylink_sfp_link_up,
+ 	.link_down = phylink_sfp_link_down,
+ 	.connect_phy = phylink_sfp_connect_phy,
+--- a/drivers/net/phy/sfp.c
++++ b/drivers/net/phy/sfp.c
+@@ -1331,7 +1331,6 @@ static void sfp_sm_mod_next(struct sfp *
+ 
+ static void sfp_sm_phy_detach(struct sfp *sfp)
+ {
+-	phy_stop(sfp->mod_phy);
+ 	sfp_remove_phy(sfp->sfp_bus);
+ 	phy_device_remove(sfp->mod_phy);
+ 	phy_device_free(sfp->mod_phy);
+@@ -1362,7 +1361,6 @@ static void sfp_sm_probe_phy(struct sfp
+ 	}
+ 
+ 	sfp->mod_phy = phy;
+-	phy_start(phy);
+ }
+ 
+ static void sfp_sm_link_up(struct sfp *sfp)
diff --git a/target/linux/generic/pending-5.4/745-net-mdio-i2c-add-support-for-Clause-45-accesses.patch b/target/linux/generic/pending-5.4/745-net-mdio-i2c-add-support-for-Clause-45-accesses.patch
new file mode 100644
index 0000000000..9a4bb5bb78
--- /dev/null
+++ b/target/linux/generic/pending-5.4/745-net-mdio-i2c-add-support-for-Clause-45-accesses.patch
@@ -0,0 +1,74 @@
+From c9de73988a35c6c85810a992954ac568cca503e5 Mon Sep 17 00:00:00 2001
+From: Russell King <rmk+kernel@armlinux.org.uk>
+Date: Wed, 2 Oct 2019 10:31:10 +0100
+Subject: [PATCH 648/660] net: mdio-i2c: add support for Clause 45 accesses
+
+Some SFP+ modules have PHYs on them just like SFP modules do, except
+they are Clause 45 PHYs.  The I2C protocol used to access them is
+modified slightly in order to send the device address and 16-bit
+register index.
+
+Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
+---
+ drivers/net/phy/mdio-i2c.c | 28 ++++++++++++++++++++--------
+ 1 file changed, 20 insertions(+), 8 deletions(-)
+
+--- a/drivers/net/phy/mdio-i2c.c
++++ b/drivers/net/phy/mdio-i2c.c
+@@ -36,17 +36,24 @@ static int i2c_mii_read(struct mii_bus *
+ {
+ 	struct i2c_adapter *i2c = bus->priv;
+ 	struct i2c_msg msgs[2];
+-	u8 data[2], dev_addr = reg;
++	u8 addr[3], data[2], *p;
+ 	int bus_addr, ret;
+ 
+ 	if (!i2c_mii_valid_phy_id(phy_id))
+ 		return 0xffff;
+ 
++	p = addr;
++	if (reg & MII_ADDR_C45) {
++		*p++ = 0x20 | ((reg >> 16) & 31);
++		*p++ = reg >> 8;
++	}
++	*p++ = reg;
++
+ 	bus_addr = i2c_mii_phy_addr(phy_id);
+ 	msgs[0].addr = bus_addr;
+ 	msgs[0].flags = 0;
+-	msgs[0].len = 1;
+-	msgs[0].buf = &dev_addr;
++	msgs[0].len = p - addr;
++	msgs[0].buf = addr;
+ 	msgs[1].addr = bus_addr;
+ 	msgs[1].flags = I2C_M_RD;
+ 	msgs[1].len = sizeof(data);
+@@ -64,18 +71,23 @@ static int i2c_mii_write(struct mii_bus
+ 	struct i2c_adapter *i2c = bus->priv;
+ 	struct i2c_msg msg;
+ 	int ret;
+-	u8 data[3];
++	u8 data[5], *p;
+ 
+ 	if (!i2c_mii_valid_phy_id(phy_id))
+ 		return 0;
+ 
+-	data[0] = reg;
+-	data[1] = val >> 8;
+-	data[2] = val;
++	p = data;
++	if (reg & MII_ADDR_C45) {
++		*p++ = (reg >> 16) & 31;
++		*p++ = reg >> 8;
++	}
++	*p++ = reg;
++	*p++ = val >> 8;
++	*p++ = val;
+ 
+ 	msg.addr = i2c_mii_phy_addr(phy_id);
+ 	msg.flags = 0;
+-	msg.len = 3;
++	msg.len = p - data;
+ 	msg.buf = data;
+ 
+ 	ret = i2c_transfer(i2c, &msg, 1);
diff --git a/target/linux/generic/pending-5.4/746-net-phylink-re-split-__phylink_connect_phy.patch b/target/linux/generic/pending-5.4/746-net-phylink-re-split-__phylink_connect_phy.patch
new file mode 100644
index 0000000000..c74a56c575
--- /dev/null
+++ b/target/linux/generic/pending-5.4/746-net-phylink-re-split-__phylink_connect_phy.patch
@@ -0,0 +1,93 @@
+From 0db7fba746b5608c30d4e2ba1c99a2a309e2d288 Mon Sep 17 00:00:00 2001
+From: Russell King <rmk+kernel@armlinux.org.uk>
+Date: Fri, 8 Nov 2019 15:22:48 +0000
+Subject: [PATCH 649/660] net: phylink: re-split __phylink_connect_phy()
+
+In order to support Clause 45 PHYs on SFP+ modules, which have an
+indeterminant phy interface mode, we need to be able to call
+phylink_bringup_phy() with a different interface mode to that used when
+binding the PHY. Reduce __phylink_connect_phy() to an attach operation,
+and move the call to phylink_bringup_phy() to its call sites.
+
+Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
+---
+ drivers/net/phy/phylink.c | 39 ++++++++++++++++++++++++---------------
+ 1 file changed, 24 insertions(+), 15 deletions(-)
+
+--- a/drivers/net/phy/phylink.c
++++ b/drivers/net/phy/phylink.c
+@@ -728,11 +728,9 @@ static int phylink_bringup_phy(struct ph
+ 	return 0;
+ }
+ 
+-static int __phylink_connect_phy(struct phylink *pl, struct phy_device *phy,
+-		phy_interface_t interface)
++static int phylink_attach_phy(struct phylink *pl, struct phy_device *phy,
++			      phy_interface_t interface)
+ {
+-	int ret;
+-
+ 	if (WARN_ON(pl->link_an_mode == MLO_AN_FIXED ||
+ 		    (pl->link_an_mode == MLO_AN_INBAND &&
+ 		     phy_interface_mode_is_8023z(interface))))
+@@ -741,15 +739,7 @@ static int __phylink_connect_phy(struct
+ 	if (pl->phydev)
+ 		return -EBUSY;
+ 
+-	ret = phy_attach_direct(pl->netdev, phy, 0, interface);
+-	if (ret)
+-		return ret;
+-
+-	ret = phylink_bringup_phy(pl, phy);
+-	if (ret)
+-		phy_detach(phy);
+-
+-	return ret;
++	return phy_attach_direct(pl->netdev, phy, 0, interface);
+ }
+ 
+ /**
+@@ -769,13 +759,23 @@ static int __phylink_connect_phy(struct
+  */
+ int phylink_connect_phy(struct phylink *pl, struct phy_device *phy)
+ {
++	int ret;
++
+ 	/* Use PHY device/driver interface */
+ 	if (pl->link_interface == PHY_INTERFACE_MODE_NA) {
+ 		pl->link_interface = phy->interface;
+ 		pl->link_config.interface = pl->link_interface;
+ 	}
+ 
+-	return __phylink_connect_phy(pl, phy, pl->link_interface);
++	ret = phylink_attach_phy(pl, phy, pl->link_interface);
++	if (ret < 0)
++		return ret;
++
++	ret = phylink_bringup_phy(pl, phy);
++	if (ret)
++		phy_detach(phy);
++
++	return ret;
+ }
+ EXPORT_SYMBOL_GPL(phylink_connect_phy);
+ 
+@@ -1759,8 +1759,17 @@ static void phylink_sfp_link_up(void *up
+ static int phylink_sfp_connect_phy(void *upstream, struct phy_device *phy)
+ {
+ 	struct phylink *pl = upstream;
++	int ret;
+ 
+-	return __phylink_connect_phy(upstream, phy, pl->link_config.interface);
++	ret = phylink_attach_phy(pl, phy, pl->link_config.interface);
++	if (ret < 0)
++		return ret;
++
++	ret = phylink_bringup_phy(pl, phy);
++	if (ret)
++		phy_detach(phy);
++
++	return ret;
+ }
+ 
+ static void phylink_sfp_disconnect_phy(void *upstream)
diff --git a/target/linux/generic/pending-5.4/747-net-phylink-support-Clause-45-PHYs-on-SFP-modules.patch b/target/linux/generic/pending-5.4/747-net-phylink-support-Clause-45-PHYs-on-SFP-modules.patch
new file mode 100644
index 0000000000..2cea118c82
--- /dev/null
+++ b/target/linux/generic/pending-5.4/747-net-phylink-support-Clause-45-PHYs-on-SFP-modules.patch
@@ -0,0 +1,89 @@
+From caf32f96f13df7d3ae6cb8bf8001c88ae22025ca Mon Sep 17 00:00:00 2001
+From: Russell King <rmk+kernel@armlinux.org.uk>
+Date: Fri, 8 Nov 2019 15:28:22 +0000
+Subject: [PATCH 650/660] net: phylink: support Clause 45 PHYs on SFP+ modules
+
+Some SFP+ modules have Clause 45 PHYs embedded on them, which need a
+little more handling in order to ensure that they are correctly setup,
+as they switch the PHY link mode according to the negotiated speed.
+
+With Clause 22 PHYs, we assumed that they would operate in SGMII mode,
+but this assumption is now false.  Adapt phylink to support Clause 45
+PHYs on SFP+ modules.
+
+Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
+---
+ drivers/net/phy/phylink.c | 21 ++++++++++++++++-----
+ 1 file changed, 16 insertions(+), 5 deletions(-)
+
+--- a/drivers/net/phy/phylink.c
++++ b/drivers/net/phy/phylink.c
+@@ -671,7 +671,8 @@ static void phylink_phy_change(struct ph
+ 		   phy_duplex_to_str(phydev->duplex));
+ }
+ 
+-static int phylink_bringup_phy(struct phylink *pl, struct phy_device *phy)
++static int phylink_bringup_phy(struct phylink *pl, struct phy_device *phy,
++			       phy_interface_t interface)
+ {
+ 	struct phylink_link_state config;
+ 	__ETHTOOL_DECLARE_LINK_MODE_MASK(supported);
+@@ -691,7 +692,7 @@ static int phylink_bringup_phy(struct ph
+ 	ethtool_convert_legacy_u32_to_link_mode(supported, phy->supported);
+ 	ethtool_convert_legacy_u32_to_link_mode(config.advertising,
+ 						phy->advertising);
+-	config.interface = pl->link_config.interface;
++	config.interface = interface;
+ 
+ 	ret = phylink_validate(pl, supported, &config);
+ 	if (ret)
+@@ -707,6 +708,7 @@ static int phylink_bringup_phy(struct ph
+ 	mutex_lock(&phy->lock);
+ 	mutex_lock(&pl->state_mutex);
+ 	pl->phydev = phy;
++	pl->phy_state.interface = interface;
+ 	linkmode_copy(pl->supported, supported);
+ 	linkmode_copy(pl->link_config.advertising, config.advertising);
+ 
+@@ -771,7 +773,7 @@ int phylink_connect_phy(struct phylink *
+ 	if (ret < 0)
+ 		return ret;
+ 
+-	ret = phylink_bringup_phy(pl, phy);
++	ret = phylink_bringup_phy(pl, phy, pl->link_config.interface);
+ 	if (ret)
+ 		phy_detach(phy);
+ 
+@@ -824,7 +826,7 @@ int phylink_of_phy_connect(struct phylin
+ 	if (!phy_dev)
+ 		return -ENODEV;
+ 
+-	ret = phylink_bringup_phy(pl, phy_dev);
++	ret = phylink_bringup_phy(pl, phy_dev, pl->link_config.interface);
+ 	if (ret)
+ 		phy_detach(phy_dev);
+ 
+@@ -1759,13 +1761,22 @@ static void phylink_sfp_link_up(void *up
+ static int phylink_sfp_connect_phy(void *upstream, struct phy_device *phy)
+ {
+ 	struct phylink *pl = upstream;
++	phy_interface_t interface = pl->link_config.interface;
+ 	int ret;
+ 
+ 	ret = phylink_attach_phy(pl, phy, pl->link_config.interface);
+ 	if (ret < 0)
+ 		return ret;
+ 
+-	ret = phylink_bringup_phy(pl, phy);
++	/* Clause 45 PHYs switch their Serdes lane between several different
++	 * modes, normally 10GBASE-R, SGMII. Some use 2500BASE-X for 2.5G
++	 * speeds.  We really need to know which interface modes the PHY and
++	 * MAC supports to properly work out which linkmodes can be supported.
++	 */
++	if (phy->is_c45)
++		interface = PHY_INTERFACE_MODE_NA;
++
++	ret = phylink_bringup_phy(pl, phy, interface);
+ 	if (ret)
+ 		phy_detach(phy);
+ 
diff --git a/target/linux/generic/pending-5.4/748-net-phylink-split-link_an_mode-configured-and-curren.patch b/target/linux/generic/pending-5.4/748-net-phylink-split-link_an_mode-configured-and-curren.patch
new file mode 100644
index 0000000000..f30d37f0c6
--- /dev/null
+++ b/target/linux/generic/pending-5.4/748-net-phylink-split-link_an_mode-configured-and-curren.patch
@@ -0,0 +1,254 @@
+From d1339d6956f0255b6ce2412328a98945be8cc3ca Mon Sep 17 00:00:00 2001
+From: Russell King <rmk+kernel@armlinux.org.uk>
+Date: Sat, 16 Nov 2019 11:30:18 +0000
+Subject: [PATCH 651/660] net: phylink: split link_an_mode configured and
+ current settings
+
+Split link_an_mode between the configured setting and the current
+operating setting.  This is an important distinction to make when we
+need to configure PHY mode for a plugged SFP+ module that does not
+use in-band signalling.
+
+Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
+---
+ drivers/net/phy/phylink.c | 59 ++++++++++++++++++++-------------------
+ 1 file changed, 31 insertions(+), 28 deletions(-)
+
+--- a/drivers/net/phy/phylink.c
++++ b/drivers/net/phy/phylink.c
+@@ -48,7 +48,8 @@ struct phylink {
+ 	unsigned long phylink_disable_state; /* bitmask of disables */
+ 	struct phy_device *phydev;
+ 	phy_interface_t link_interface;	/* PHY_INTERFACE_xxx */
+-	u8 link_an_mode;		/* MLO_AN_xxx */
++	u8 cfg_link_an_mode;		/* MLO_AN_xxx */
++	u8 cur_link_an_mode;
+ 	u8 link_port;			/* The current non-phy ethtool port */
+ 	__ETHTOOL_DECLARE_LINK_MODE_MASK(supported);
+ 
+@@ -253,12 +254,12 @@ static int phylink_parse_mode(struct phy
+ 
+ 	dn = fwnode_get_named_child_node(fwnode, "fixed-link");
+ 	if (dn || fwnode_property_present(fwnode, "fixed-link"))
+-		pl->link_an_mode = MLO_AN_FIXED;
++		pl->cfg_link_an_mode = MLO_AN_FIXED;
+ 	fwnode_handle_put(dn);
+ 
+ 	if (fwnode_property_read_string(fwnode, "managed", &managed) == 0 &&
+ 	    strcmp(managed, "in-band-status") == 0) {
+-		if (pl->link_an_mode == MLO_AN_FIXED) {
++		if (pl->cfg_link_an_mode == MLO_AN_FIXED) {
+ 			netdev_err(pl->netdev,
+ 				   "can't use both fixed-link and in-band-status\n");
+ 			return -EINVAL;
+@@ -270,7 +271,7 @@ static int phylink_parse_mode(struct phy
+ 		phylink_set(pl->supported, Asym_Pause);
+ 		phylink_set(pl->supported, Pause);
+ 		pl->link_config.an_enabled = true;
+-		pl->link_an_mode = MLO_AN_INBAND;
++		pl->cfg_link_an_mode = MLO_AN_INBAND;
+ 
+ 		switch (pl->link_config.interface) {
+ 		case PHY_INTERFACE_MODE_SGMII:
+@@ -330,14 +331,14 @@ static void phylink_mac_config(struct ph
+ {
+ 	netdev_dbg(pl->netdev,
+ 		   "%s: mode=%s/%s/%s/%s adv=%*pb pause=%02x link=%u an=%u\n",
+-		   __func__, phylink_an_mode_str(pl->link_an_mode),
++		   __func__, phylink_an_mode_str(pl->cur_link_an_mode),
+ 		   phy_modes(state->interface),
+ 		   phy_speed_to_str(state->speed),
+ 		   phy_duplex_to_str(state->duplex),
+ 		   __ETHTOOL_LINK_MODE_MASK_NBITS, state->advertising,
+ 		   state->pause, state->link, state->an_enabled);
+ 
+-	pl->ops->mac_config(pl->netdev, pl->link_an_mode, state);
++	pl->ops->mac_config(pl->netdev, pl->cur_link_an_mode, state);
+ }
+ 
+ static void phylink_mac_config_up(struct phylink *pl,
+@@ -446,7 +447,7 @@ static void phylink_resolve(struct work_
+ 	} else if (pl->mac_link_dropped) {
+ 		link_state.link = false;
+ 	} else {
+-		switch (pl->link_an_mode) {
++		switch (pl->cur_link_an_mode) {
+ 		case MLO_AN_PHY:
+ 			link_state = pl->phy_state;
+ 			phylink_resolve_flow(pl, &link_state);
+@@ -483,12 +484,12 @@ static void phylink_resolve(struct work_
+ 	if (link_state.link != netif_carrier_ok(ndev)) {
+ 		if (!link_state.link) {
+ 			netif_carrier_off(ndev);
+-			pl->ops->mac_link_down(ndev, pl->link_an_mode,
++			pl->ops->mac_link_down(ndev, pl->cur_link_an_mode,
+ 					       pl->cur_interface);
+ 			netdev_info(ndev, "Link is Down\n");
+ 		} else {
+ 			pl->cur_interface = link_state.interface;
+-			pl->ops->mac_link_up(ndev, pl->link_an_mode,
++			pl->ops->mac_link_up(ndev, pl->cur_link_an_mode,
+ 					     pl->cur_interface, pl->phydev);
+ 
+ 			netif_carrier_on(ndev);
+@@ -610,7 +611,7 @@ struct phylink *phylink_create(struct ne
+ 		return ERR_PTR(ret);
+ 	}
+ 
+-	if (pl->link_an_mode == MLO_AN_FIXED) {
++	if (pl->cfg_link_an_mode == MLO_AN_FIXED) {
+ 		ret = phylink_parse_fixedlink(pl, fwnode);
+ 		if (ret < 0) {
+ 			kfree(pl);
+@@ -618,6 +619,8 @@ struct phylink *phylink_create(struct ne
+ 		}
+ 	}
+ 
++	pl->cur_link_an_mode = pl->cfg_link_an_mode;
++
+ 	ret = phylink_register_sfp(pl, fwnode);
+ 	if (ret < 0) {
+ 		kfree(pl);
+@@ -733,8 +736,8 @@ static int phylink_bringup_phy(struct ph
+ static int phylink_attach_phy(struct phylink *pl, struct phy_device *phy,
+ 			      phy_interface_t interface)
+ {
+-	if (WARN_ON(pl->link_an_mode == MLO_AN_FIXED ||
+-		    (pl->link_an_mode == MLO_AN_INBAND &&
++	if (WARN_ON(pl->cfg_link_an_mode == MLO_AN_FIXED ||
++		    (pl->cfg_link_an_mode == MLO_AN_INBAND &&
+ 		     phy_interface_mode_is_8023z(interface))))
+ 		return -EINVAL;
+ 
+@@ -801,8 +804,8 @@ int phylink_of_phy_connect(struct phylin
+ 	int ret;
+ 
+ 	/* Fixed links and 802.3z are handled without needing a PHY */
+-	if (pl->link_an_mode == MLO_AN_FIXED ||
+-	    (pl->link_an_mode == MLO_AN_INBAND &&
++	if (pl->cfg_link_an_mode == MLO_AN_FIXED ||
++	    (pl->cfg_link_an_mode == MLO_AN_INBAND &&
+ 	     phy_interface_mode_is_8023z(pl->link_interface)))
+ 		return 0;
+ 
+@@ -813,7 +816,7 @@ int phylink_of_phy_connect(struct phylin
+ 		phy_node = of_parse_phandle(dn, "phy-device", 0);
+ 
+ 	if (!phy_node) {
+-		if (pl->link_an_mode == MLO_AN_PHY)
++		if (pl->cfg_link_an_mode == MLO_AN_PHY)
+ 			return -ENODEV;
+ 		return 0;
+ 	}
+@@ -876,7 +879,7 @@ int phylink_fixed_state_cb(struct phylin
+ 	/* It does not make sense to let the link be overriden unless we use
+ 	 * MLO_AN_FIXED
+ 	 */
+-	if (pl->link_an_mode != MLO_AN_FIXED)
++	if (pl->cfg_link_an_mode != MLO_AN_FIXED)
+ 		return -EINVAL;
+ 
+ 	mutex_lock(&pl->state_mutex);
+@@ -926,7 +929,7 @@ void phylink_start(struct phylink *pl)
+ 	ASSERT_RTNL();
+ 
+ 	netdev_info(pl->netdev, "configuring for %s/%s link mode\n",
+-		    phylink_an_mode_str(pl->link_an_mode),
++		    phylink_an_mode_str(pl->cur_link_an_mode),
+ 		    phy_modes(pl->link_config.interface));
+ 
+ 	/* Always set the carrier off */
+@@ -948,7 +951,7 @@ void phylink_start(struct phylink *pl)
+ 	clear_bit(PHYLINK_DISABLE_STOPPED, &pl->phylink_disable_state);
+ 	phylink_run_resolve(pl);
+ 
+-	if (pl->link_an_mode == MLO_AN_FIXED && pl->link_gpio) {
++	if (pl->cfg_link_an_mode == MLO_AN_FIXED && pl->link_gpio) {
+ 		int irq = gpiod_to_irq(pl->link_gpio);
+ 
+ 		if (irq > 0) {
+@@ -963,7 +966,7 @@ void phylink_start(struct phylink *pl)
+ 		if (irq <= 0)
+ 			mod_timer(&pl->link_poll, jiffies + HZ);
+ 	}
+-	if (pl->link_an_mode == MLO_AN_FIXED && pl->get_fixed_state)
++	if (pl->cfg_link_an_mode == MLO_AN_FIXED && pl->get_fixed_state)
+ 		mod_timer(&pl->link_poll, jiffies + HZ);
+ 	if (pl->phydev)
+ 		phy_start(pl->phydev);
+@@ -1090,7 +1093,7 @@ int phylink_ethtool_ksettings_get(struct
+ 
+ 	linkmode_copy(kset->link_modes.supported, pl->supported);
+ 
+-	switch (pl->link_an_mode) {
++	switch (pl->cur_link_an_mode) {
+ 	case MLO_AN_FIXED:
+ 		/* We are using fixed settings. Report these as the
+ 		 * current link settings - and note that these also
+@@ -1163,7 +1166,7 @@ int phylink_ethtool_ksettings_set(struct
+ 		/* If we have a fixed link (as specified by firmware), refuse
+ 		 * to change link parameters.
+ 		 */
+-		if (pl->link_an_mode == MLO_AN_FIXED &&
++		if (pl->cur_link_an_mode == MLO_AN_FIXED &&
+ 		    (s->speed != pl->link_config.speed ||
+ 		     s->duplex != pl->link_config.duplex))
+ 			return -EINVAL;
+@@ -1175,7 +1178,7 @@ int phylink_ethtool_ksettings_set(struct
+ 		__clear_bit(ETHTOOL_LINK_MODE_Autoneg_BIT, config.advertising);
+ 	} else {
+ 		/* If we have a fixed link, refuse to enable autonegotiation */
+-		if (pl->link_an_mode == MLO_AN_FIXED)
++		if (pl->cur_link_an_mode == MLO_AN_FIXED)
+ 			return -EINVAL;
+ 
+ 		config.speed = SPEED_UNKNOWN;
+@@ -1217,7 +1220,7 @@ int phylink_ethtool_ksettings_set(struct
+ 	 * configuration. For a fixed link, this isn't able to change any
+ 	 * parameters, which just leaves inband mode.
+ 	 */
+-	if (pl->link_an_mode == MLO_AN_INBAND &&
++	if (pl->cur_link_an_mode == MLO_AN_INBAND &&
+ 	    !test_bit(PHYLINK_DISABLE_STOPPED, &pl->phylink_disable_state)) {
+ 		phylink_mac_config(pl, &pl->link_config);
+ 		phylink_mac_an_restart(pl);
+@@ -1307,7 +1310,7 @@ int phylink_ethtool_set_pauseparam(struc
+ 				   pause->tx_pause);
+ 	} else if (!test_bit(PHYLINK_DISABLE_STOPPED,
+ 			     &pl->phylink_disable_state)) {
+-		switch (pl->link_an_mode) {
++		switch (pl->cur_link_an_mode) {
+ 		case MLO_AN_FIXED:
+ 			/* Should we allow fixed links to change against the config? */
+ 			phylink_resolve_flow(pl, config);
+@@ -1496,7 +1499,7 @@ static int phylink_mii_read(struct phyli
+ 	struct phylink_link_state state;
+ 	int val = 0xffff;
+ 
+-	switch (pl->link_an_mode) {
++	switch (pl->cur_link_an_mode) {
+ 	case MLO_AN_FIXED:
+ 		if (phy_id == 0) {
+ 			phylink_get_fixed_state(pl, &state);
+@@ -1524,7 +1527,7 @@ static int phylink_mii_read(struct phyli
+ static int phylink_mii_write(struct phylink *pl, unsigned int phy_id,
+ 			     unsigned int reg, unsigned int val)
+ {
+-	switch (pl->link_an_mode) {
++	switch (pl->cur_link_an_mode) {
+ 	case MLO_AN_FIXED:
+ 		break;
+ 
+@@ -1698,10 +1701,10 @@ static int phylink_sfp_module_insert(voi
+ 		linkmode_copy(pl->link_config.advertising, config.advertising);
+ 	}
+ 
+-	if (pl->link_an_mode != MLO_AN_INBAND ||
++	if (pl->cur_link_an_mode != MLO_AN_INBAND ||
+ 	    pl->link_config.interface != config.interface) {
+ 		pl->link_config.interface = config.interface;
+-		pl->link_an_mode = MLO_AN_INBAND;
++		pl->cur_link_an_mode = MLO_AN_INBAND;
+ 
+ 		changed = true;
+ 
diff --git a/target/linux/generic/pending-5.4/749-net-phylink-split-phylink_sfp_module_insert.patch b/target/linux/generic/pending-5.4/749-net-phylink-split-phylink_sfp_module_insert.patch
new file mode 100644
index 0000000000..87d70d1434
--- /dev/null
+++ b/target/linux/generic/pending-5.4/749-net-phylink-split-phylink_sfp_module_insert.patch
@@ -0,0 +1,120 @@
+From 36569971241ae6b81376da4937d2c8760122d10b Mon Sep 17 00:00:00 2001
+From: Russell King <rmk+kernel@armlinux.org.uk>
+Date: Thu, 21 Nov 2019 17:58:58 +0000
+Subject: [PATCH 652/660] net: phylink: split phylink_sfp_module_insert()
+
+Split out the configuration step from phylink_sfp_module_insert() so
+we can re-use this later.
+
+Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
+---
+ drivers/net/phy/phylink.c | 47 +++++++++++++++++++++++----------------
+ 1 file changed, 28 insertions(+), 19 deletions(-)
+
+--- a/drivers/net/phy/phylink.c
++++ b/drivers/net/phy/phylink.c
+@@ -1633,25 +1633,21 @@ static void phylink_sfp_detach(void *ups
+ 	pl->netdev->sfp_bus = NULL;
+ }
+ 
+-static int phylink_sfp_module_insert(void *upstream,
+-				     const struct sfp_eeprom_id *id)
++static int phylink_sfp_config(struct phylink *pl, u8 mode, u8 port,
++			      const unsigned long *supported,
++			      const unsigned long *advertising)
+ {
+-	struct phylink *pl = upstream;
+-	__ETHTOOL_DECLARE_LINK_MODE_MASK(support) = { 0, };
+ 	__ETHTOOL_DECLARE_LINK_MODE_MASK(support1);
++	__ETHTOOL_DECLARE_LINK_MODE_MASK(support);
+ 	struct phylink_link_state config;
+ 	phy_interface_t iface;
+-	int ret = 0;
+ 	bool changed;
+-	u8 port;
++	int ret;
+ 
+-	ASSERT_RTNL();
+-
+-	sfp_parse_support(pl->sfp_bus, id, support);
+-	port = sfp_parse_port(pl->sfp_bus, id, support);
++	linkmode_copy(support, supported);
+ 
+ 	memset(&config, 0, sizeof(config));
+-	linkmode_copy(config.advertising, support);
++	linkmode_copy(config.advertising, advertising);
+ 	config.interface = PHY_INTERFACE_MODE_NA;
+ 	config.speed = SPEED_UNKNOWN;
+ 	config.duplex = DUPLEX_UNKNOWN;
+@@ -1666,8 +1662,6 @@ static int phylink_sfp_module_insert(voi
+ 		return ret;
+ 	}
+ 
+-	linkmode_copy(support1, support);
+-
+ 	iface = sfp_select_interface(pl->sfp_bus, config.advertising);
+ 	if (iface == PHY_INTERFACE_MODE_NA) {
+ 		netdev_err(pl->netdev,
+@@ -1677,18 +1671,18 @@ static int phylink_sfp_module_insert(voi
+ 	}
+ 
+ 	config.interface = iface;
++	linkmode_copy(support1, support);
+ 	ret = phylink_validate(pl, support1, &config);
+ 	if (ret) {
+ 		netdev_err(pl->netdev, "validation of %s/%s with support %*pb failed: %d\n",
+-			   phylink_an_mode_str(MLO_AN_INBAND),
++			   phylink_an_mode_str(mode),
+ 			   phy_modes(config.interface),
+ 			   __ETHTOOL_LINK_MODE_MASK_NBITS, support, ret);
+ 		return ret;
+ 	}
+ 
+ 	netdev_dbg(pl->netdev, "requesting link mode %s/%s with support %*pb\n",
+-		   phylink_an_mode_str(MLO_AN_INBAND),
+-		   phy_modes(config.interface),
++		   phylink_an_mode_str(mode), phy_modes(config.interface),
+ 		   __ETHTOOL_LINK_MODE_MASK_NBITS, support);
+ 
+ 	if (phy_interface_mode_is_8023z(iface) && pl->phydev)
+@@ -1701,15 +1695,15 @@ static int phylink_sfp_module_insert(voi
+ 		linkmode_copy(pl->link_config.advertising, config.advertising);
+ 	}
+ 
+-	if (pl->cur_link_an_mode != MLO_AN_INBAND ||
++	if (pl->cur_link_an_mode != mode ||
+ 	    pl->link_config.interface != config.interface) {
+ 		pl->link_config.interface = config.interface;
+-		pl->cur_link_an_mode = MLO_AN_INBAND;
++		pl->cur_link_an_mode = mode;
+ 
+ 		changed = true;
+ 
+ 		netdev_info(pl->netdev, "switched to %s/%s link mode\n",
+-			    phylink_an_mode_str(MLO_AN_INBAND),
++			    phylink_an_mode_str(mode),
+ 			    phy_modes(config.interface));
+ 	}
+ 
+@@ -1722,6 +1716,21 @@ static int phylink_sfp_module_insert(voi
+ 	return ret;
+ }
+ 
++static int phylink_sfp_module_insert(void *upstream,
++				     const struct sfp_eeprom_id *id)
++{
++	struct phylink *pl = upstream;
++	__ETHTOOL_DECLARE_LINK_MODE_MASK(support) = { 0, };
++	u8 port;
++
++	ASSERT_RTNL();
++
++	sfp_parse_support(pl->sfp_bus, id, support);
++	port = sfp_parse_port(pl->sfp_bus, id, support);
++
++	return phylink_sfp_config(pl, MLO_AN_INBAND, port, support, support);
++}
++
+ static int phylink_sfp_module_start(void *upstream)
+ {
+ 	struct phylink *pl = upstream;
diff --git a/target/linux/generic/pending-5.4/750-net-phylink-delay-MAC-configuration-for-copper-SFP-m.patch b/target/linux/generic/pending-5.4/750-net-phylink-delay-MAC-configuration-for-copper-SFP-m.patch
new file mode 100644
index 0000000000..358b9a1082
--- /dev/null
+++ b/target/linux/generic/pending-5.4/750-net-phylink-delay-MAC-configuration-for-copper-SFP-m.patch
@@ -0,0 +1,204 @@
+From eb514428f75bc67d12ff019c44a8f8ca9f33c54c Mon Sep 17 00:00:00 2001
+From: Russell King <rmk+kernel@armlinux.org.uk>
+Date: Thu, 21 Nov 2019 17:42:49 +0000
+Subject: [PATCH 653/660] net: phylink: delay MAC configuration for copper SFP
+ modules
+
+Knowing whether we need to delay the MAC configuration because a module
+may have a PHY is useful to phylink to allow NBASE-T modules to work on
+systems supporting no more than 2.5G speeds.
+
+This commit allows us to delay such configuration until after the PHY
+has been probed by recording the parsed capabilities, and if the module
+may have a PHY, doing no more until the module_start() notification is
+called.  At that point, we either have a PHY, or we don't.
+
+We move the PHY-based setup a little later, and use the PHYs support
+capabilities rather than the EEPROM parsed capabilities to determine
+whether we can support the PHY.
+
+Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
+---
+ drivers/net/phy/phylink.c | 59 +++++++++++++++++++++++++++++++--------
+ drivers/net/phy/sfp-bus.c | 28 +++++++++++++++++++
+ include/linux/sfp.h       |  7 +++++
+ 3 files changed, 83 insertions(+), 11 deletions(-)
+
+--- a/drivers/net/phy/phylink.c
++++ b/drivers/net/phy/phylink.c
+@@ -72,6 +72,9 @@ struct phylink {
+ 	bool mac_link_dropped;
+ 
+ 	struct sfp_bus *sfp_bus;
++	bool sfp_may_have_phy;
++	__ETHTOOL_DECLARE_LINK_MODE_MASK(sfp_support);
++	u8 sfp_port;
+ };
+ 
+ static inline void linkmode_zero(unsigned long *dst)
+@@ -1633,7 +1636,7 @@ static void phylink_sfp_detach(void *ups
+ 	pl->netdev->sfp_bus = NULL;
+ }
+ 
+-static int phylink_sfp_config(struct phylink *pl, u8 mode, u8 port,
++static int phylink_sfp_config(struct phylink *pl, u8 mode,
+ 			      const unsigned long *supported,
+ 			      const unsigned long *advertising)
+ {
+@@ -1707,7 +1710,7 @@ static int phylink_sfp_config(struct phy
+ 			    phy_modes(config.interface));
+ 	}
+ 
+-	pl->link_port = port;
++	pl->link_port = pl->sfp_port;
+ 
+ 	if (changed && !test_bit(PHYLINK_DISABLE_STOPPED,
+ 				 &pl->phylink_disable_state))
+@@ -1720,15 +1723,20 @@ static int phylink_sfp_module_insert(voi
+ 				     const struct sfp_eeprom_id *id)
+ {
+ 	struct phylink *pl = upstream;
+-	__ETHTOOL_DECLARE_LINK_MODE_MASK(support) = { 0, };
+-	u8 port;
++	unsigned long *support = pl->sfp_support;
+ 
+ 	ASSERT_RTNL();
+ 
++	linkmode_zero(support);
+ 	sfp_parse_support(pl->sfp_bus, id, support);
+-	port = sfp_parse_port(pl->sfp_bus, id, support);
++	pl->sfp_port = sfp_parse_port(pl->sfp_bus, id, support);
+ 
+-	return phylink_sfp_config(pl, MLO_AN_INBAND, port, support, support);
++	/* If this module may have a PHY connecting later, defer until later */
++	pl->sfp_may_have_phy = sfp_may_have_phy(pl->sfp_bus, id);
++	if (pl->sfp_may_have_phy)
++		return 0;
++
++	return phylink_sfp_config(pl, MLO_AN_INBAND, support, support);
+ }
+ 
+ static int phylink_sfp_module_start(void *upstream)
+@@ -1736,10 +1744,19 @@ static int phylink_sfp_module_start(void
+ 	struct phylink *pl = upstream;
+ 
+ 	/* If this SFP module has a PHY, start the PHY now. */
+-	if (pl->phydev)
++	if (pl->phydev) {
+ 		phy_start(pl->phydev);
+-		
+-	return 0;
++		return 0;
++	}
++
++	/* If the module may have a PHY but we didn't detect one we
++	 * need to configure the MAC here.
++	 */
++	if (!pl->sfp_may_have_phy)
++		return 0;
++
++	return phylink_sfp_config(pl, MLO_AN_INBAND,
++				  pl->sfp_support, pl->sfp_support);
+ }
+ 
+ static void phylink_sfp_module_stop(void *upstream)
+@@ -1773,10 +1790,30 @@ static void phylink_sfp_link_up(void *up
+ static int phylink_sfp_connect_phy(void *upstream, struct phy_device *phy)
+ {
+ 	struct phylink *pl = upstream;
+-	phy_interface_t interface = pl->link_config.interface;
++	__ETHTOOL_DECLARE_LINK_MODE_MASK(supported);
++	__ETHTOOL_DECLARE_LINK_MODE_MASK(advertising);
++	phy_interface_t interface;
+ 	int ret;
+ 
+-	ret = phylink_attach_phy(pl, phy, pl->link_config.interface);
++	/*
++	 * This is the new way of dealing with flow control for PHYs,
++	 * as described by Timur Tabi in commit 529ed1275263 ("net: phy:
++	 * phy drivers should not set SUPPORTED_[Asym_]Pause") except
++	 * using our validate call to the MAC, we rely upon the MAC
++	 * clearing the bits from both supported and advertising fields.
++	 */
++	phy_support_asym_pause(phy);
++
++	ethtool_convert_legacy_u32_to_link_mode(supported, phy->supported);
++	ethtool_convert_legacy_u32_to_link_mode(advertising, phy->advertising);
++
++	/* Do the initial configuration */
++	ret = phylink_sfp_config(pl, ML_AN_INBAND, supported, advertising);
++	if (ret < 0)
++		return ret;
++
++	interface = pl->link_config.interface;
++	ret = phylink_attach_phy(pl, phy, interface);
+ 	if (ret < 0)
+ 		return ret;
+ 
+--- a/drivers/net/phy/sfp-bus.c
++++ b/drivers/net/phy/sfp-bus.c
+@@ -102,6 +102,7 @@ static const struct sfp_quirk *sfp_looku
+ 
+ 	return NULL;
+ }
++
+ /**
+  * sfp_parse_port() - Parse the EEPROM base ID, setting the port type
+  * @bus: a pointer to the &struct sfp_bus structure for the sfp module
+@@ -178,6 +179,33 @@ int sfp_parse_port(struct sfp_bus *bus,
+ EXPORT_SYMBOL_GPL(sfp_parse_port);
+ 
+ /**
++ * sfp_may_have_phy() - indicate whether the module may have a PHY
++ * @bus: a pointer to the &struct sfp_bus structure for the sfp module
++ * @id: a pointer to the module's &struct sfp_eeprom_id
++ *
++ * Parse the EEPROM identification given in @id, and return whether
++ * this module may have a PHY.
++ */
++bool sfp_may_have_phy(struct sfp_bus *bus, const struct sfp_eeprom_id *id)
++{
++	if (id->base.e1000_base_t)
++		return true;
++
++	if (id->base.phys_id != SFF8024_ID_DWDM_SFP) {
++		switch (id->base.extended_cc) {
++		case SFF8024_ECC_10GBASE_T_SFI:
++		case SFF8024_ECC_10GBASE_T_SR:
++		case SFF8024_ECC_5GBASE_T:
++		case SFF8024_ECC_2_5GBASE_T:
++			return true;
++		}
++	}
++
++	return false;
++}
++EXPORT_SYMBOL_GPL(sfp_may_have_phy);
++
++/**
+  * sfp_parse_support() - Parse the eeprom id for supported link modes
+  * @bus: a pointer to the &struct sfp_bus structure for the sfp module
+  * @id: a pointer to the module's &struct sfp_eeprom_id
+--- a/include/linux/sfp.h
++++ b/include/linux/sfp.h
+@@ -533,6 +533,7 @@ struct sfp_upstream_ops {
+ #if IS_ENABLED(CONFIG_SFP)
+ int sfp_parse_port(struct sfp_bus *bus, const struct sfp_eeprom_id *id,
+ 		   unsigned long *support);
++bool sfp_may_have_phy(struct sfp_bus *bus, const struct sfp_eeprom_id *id);
+ void sfp_parse_support(struct sfp_bus *bus, const struct sfp_eeprom_id *id,
+ 		       unsigned long *support);
+ phy_interface_t sfp_select_interface(struct sfp_bus *bus,
+@@ -556,6 +557,12 @@ static inline int sfp_parse_port(struct
+ 	return PORT_OTHER;
+ }
+ 
++static inline bool sfp_may_have_phy(struct sfp_bus *bus,
++				    const struct sfp_eeprom_id *id)
++{
++	return false;
++}
++
+ static inline void sfp_parse_support(struct sfp_bus *bus,
+ 				     const struct sfp_eeprom_id *id,
+ 				     unsigned long *support)
diff --git a/target/linux/generic/pending-5.4/751-net-phylink-make-Broadcom-BCM84881-based-SFPs-work.patch b/target/linux/generic/pending-5.4/751-net-phylink-make-Broadcom-BCM84881-based-SFPs-work.patch
new file mode 100644
index 0000000000..1724d445b7
--- /dev/null
+++ b/target/linux/generic/pending-5.4/751-net-phylink-make-Broadcom-BCM84881-based-SFPs-work.patch
@@ -0,0 +1,58 @@
+From 3d8592a23dd67fb78ad85ddf711a059d3880fcb4 Mon Sep 17 00:00:00 2001
+From: Russell King <rmk+kernel@armlinux.org.uk>
+Date: Fri, 8 Nov 2019 17:19:16 +0000
+Subject: [PATCH 654/660] net: phylink: make Broadcom BCM84881 based SFPs work
+
+The Broadcom BCM84881 does not appear to send the SGMII control word
+when operating in SGMII mode, which causes network adapters to fail
+to link with the PHY, or decide to operate at fixed 1G speed, even if
+the PHY negotiated 100M.
+
+Work around this by detecting the Broadcom BCM84881 and switch to phy
+mode rather than inband mode.
+
+Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
+---
+ drivers/net/phy/phylink.c | 17 ++++++++++++++++-
+ 1 file changed, 16 insertions(+), 1 deletion(-)
+
+--- a/drivers/net/phy/phylink.c
++++ b/drivers/net/phy/phylink.c
+@@ -1787,12 +1787,22 @@ static void phylink_sfp_link_up(void *up
+ 	phylink_run_resolve(pl);
+ }
+ 
++/* The Broadcom BCM84881 in the Methode DM7052 is unable to provide a SGMII
++ * or 802.3z control word, so inband will not work.
++ */
++static bool phylink_phy_no_inband(struct phy_device *phy)
++{
++	return phy->is_c45 &&
++		(phy->c45_ids.device_ids[1] & 0xfffffff0) == 0xae025150;
++}
++
+ static int phylink_sfp_connect_phy(void *upstream, struct phy_device *phy)
+ {
+ 	struct phylink *pl = upstream;
+ 	__ETHTOOL_DECLARE_LINK_MODE_MASK(supported);
+ 	__ETHTOOL_DECLARE_LINK_MODE_MASK(advertising);
+ 	phy_interface_t interface;
++	u8 mode;
+ 	int ret;
+ 
+ 	/*
+@@ -1807,8 +1817,13 @@ static int phylink_sfp_connect_phy(void
+ 	ethtool_convert_legacy_u32_to_link_mode(supported, phy->supported);
+ 	ethtool_convert_legacy_u32_to_link_mode(advertising, phy->advertising);
+ 
++	if (phylink_phy_no_inband(phy))
++		mode = MLO_AN_PHY;
++	else
++		mode = MLO_AN_INBAND;
++
+ 	/* Do the initial configuration */
+-	ret = phylink_sfp_config(pl, ML_AN_INBAND, supported, advertising);
++	ret = phylink_sfp_config(pl, mode, supported, advertising);
+ 	if (ret < 0)
+ 		return ret;
+ 
diff --git a/target/linux/generic/pending-5.4/752-net-phy-add-Broadcom-BCM84881-PHY-driver.patch b/target/linux/generic/pending-5.4/752-net-phy-add-Broadcom-BCM84881-PHY-driver.patch
new file mode 100644
index 0000000000..a69cf397aa
--- /dev/null
+++ b/target/linux/generic/pending-5.4/752-net-phy-add-Broadcom-BCM84881-PHY-driver.patch
@@ -0,0 +1,333 @@
+From 0f669e10ede7f06bb998373de6a9d169f47fcc66 Mon Sep 17 00:00:00 2001
+From: Russell King <rmk+kernel@armlinux.org.uk>
+Date: Tue, 5 Nov 2019 11:54:30 +0000
+Subject: [PATCH 655/660] net: phy: add Broadcom BCM84881 PHY driver
+
+Add a rudimentary Clause 45 driver for the BCM84881 PHY, found on
+Methode DM7052 SFPs.
+
+Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
+---
+ drivers/net/phy/Kconfig    |   5 +
+ drivers/net/phy/Makefile   |   1 +
+ drivers/net/phy/bcm84881.c | 290 +++++++++++++++++++++++++++++++++++++
+ 3 files changed, 296 insertions(+)
+ create mode 100644 drivers/net/phy/bcm84881.c
+
+--- a/drivers/net/phy/Kconfig
++++ b/drivers/net/phy/Kconfig
+@@ -280,6 +280,11 @@ config BROADCOM_PHY
+ 	  Currently supports the BCM5411, BCM5421, BCM5461, BCM54616S, BCM5464,
+ 	  BCM5481, BCM54810 and BCM5482 PHYs.
+ 
++config BCM84881_PHY
++	tristate "Broadcom BCM84881 PHY"
++	---help---
++	  Support the Broadcom BCM84881 PHY.
++
+ config CICADA_PHY
+ 	tristate "Cicada PHYs"
+ 	---help---
+--- a/drivers/net/phy/Makefile
++++ b/drivers/net/phy/Makefile
+@@ -54,6 +54,7 @@ obj-$(CONFIG_BCM87XX_PHY)	+= bcm87xx.o
+ obj-$(CONFIG_BCM_CYGNUS_PHY)	+= bcm-cygnus.o
+ obj-$(CONFIG_BCM_NET_PHYLIB)	+= bcm-phy-lib.o
+ obj-$(CONFIG_BROADCOM_PHY)	+= broadcom.o
++obj-$(CONFIG_BCM84881_PHY)	+= bcm84881.o
+ obj-$(CONFIG_CICADA_PHY)	+= cicada.o
+ obj-$(CONFIG_CORTINA_PHY)	+= cortina.o
+ obj-$(CONFIG_DAVICOM_PHY)	+= davicom.o
+--- /dev/null
++++ b/drivers/net/phy/bcm84881.c
+@@ -0,0 +1,290 @@
++// SPDX-License-Identifier: GPL-2.0
++// Broadcom BCM84881 NBASE-T PHY driver, as found on a SFP+ module.
++// Copyright (C) 2019 Russell King, Deep Blue Solutions Ltd.
++//
++// Like the Marvell 88x3310, the Broadcom 84881 changes its host-side
++// interface according to the operating speed between 10GBASE-R,
++// 2500BASE-X and SGMII (but unlike the 88x3310, without the control
++// word).
++//
++// This driver only supports those aspects of the PHY that I'm able to
++// observe and test with the SFP+ module, which is an incomplete subset
++// of what this PHY is able to support. For example, I only assume it
++// supports a single lane Serdes connection, but it may be that the PHY
++// is able to support more than that.
++#include <linux/delay.h>
++#include <linux/module.h>
++#include <linux/phy.h>
++
++enum {
++	MDIO_AN_C22 = 0xffe0,
++};
++
++static int bcm84881_wait_init(struct phy_device *phydev)
++{
++	unsigned int tries = 20;
++	int ret, val;
++
++	do {
++		val = phy_read_mmd(phydev, MDIO_MMD_PMAPMD, MDIO_CTRL1);
++		if (val < 0) {
++			ret = val;
++			break;
++		}
++		if (!(val & MDIO_CTRL1_RESET)) {
++			ret = 0;
++			break;
++		}
++		if (!--tries) {
++			ret = -ETIMEDOUT;
++			break;
++		}
++		msleep(100);
++	} while (1);
++
++	if (ret)
++		phydev_err(phydev, "%s failed: %d\n", __func__, ret);
++
++	return ret;
++}
++
++static int bcm84881_config_init(struct phy_device *phydev)
++{
++	switch (phydev->interface) {
++	case PHY_INTERFACE_MODE_SGMII:
++	case PHY_INTERFACE_MODE_2500BASEX:
++	case PHY_INTERFACE_MODE_10GKR:
++		break;
++	default:
++		return -ENODEV;
++	}
++	return 0;
++}
++
++static int bcm84881_probe(struct phy_device *phydev)
++{
++	/* This driver requires PMAPMD and AN blocks */
++	const u32 mmd_mask = MDIO_DEVS_PMAPMD | MDIO_DEVS_AN;
++
++	if (!phydev->is_c45 ||
++	    (phydev->c45_ids.devices_in_package & mmd_mask) != mmd_mask)
++		return -ENODEV;
++
++	return 0;
++}
++
++static int genphy_c45_an_config_aneg(struct phy_device *phydev)
++{
++	bool changed = false;
++	u32 advertising;
++	int ret;
++
++	phydev->advertising &= phydev->supported;
++	advertising = phydev->advertising;
++
++	ret = phy_modify_mmd_changed(phydev, MDIO_MMD_AN, MDIO_AN_ADVERTISE,
++				     ADVERTISE_ALL | ADVERTISE_100BASE4 |
++				     ADVERTISE_PAUSE_CAP | ADVERTISE_PAUSE_ASYM,
++				     ethtool_adv_to_mii_adv_t(advertising));
++	if (ret < 0)
++		return ret;
++	if (ret > 0)
++		changed = true;
++
++	ret = phy_modify_mmd_changed(phydev, MDIO_MMD_AN, MDIO_AN_10GBT_CTRL,
++				     MDIO_AN_10GBT_CTRL_ADV10G,
++				     advertising & ADVERTISED_10000baseT_Full ?
++					MDIO_AN_10GBT_CTRL_ADV10G : 0);
++	if (ret < 0)
++		return ret;
++	if (ret > 0)
++		changed = true;
++
++	return genphy_c45_check_and_restart_aneg(phydev, changed);
++}
++
++static int bcm84881_config_aneg(struct phy_device *phydev)
++{
++	bool changed = false;
++	u32 adv;
++	int ret;
++
++	/* Wait for the PHY to finish initialising, otherwise our
++	 * advertisement may be overwritten.
++	 */
++	ret = bcm84881_wait_init(phydev);
++	if (ret)
++		return ret;
++
++	/* We don't support manual MDI control */
++	phydev->mdix_ctrl = ETH_TP_MDI_AUTO;
++
++	/* disabled autoneg doesn't seem to work with this PHY */
++	if (phydev->autoneg == AUTONEG_DISABLE)
++		return -EINVAL;
++
++	ret = genphy_c45_an_config_aneg(phydev);
++	if (ret < 0)
++		return ret;
++	if (ret > 0)
++		changed = true;
++
++	adv = ethtool_adv_to_mii_ctrl1000_t(phydev->advertising);
++	ret = phy_modify_mmd_changed(phydev, MDIO_MMD_AN,
++				     MDIO_AN_C22 + MII_CTRL1000,
++				     ADVERTISE_1000FULL | ADVERTISE_1000HALF,
++				     adv);
++	if (ret < 0)
++		return ret;
++	if (ret > 0)
++		changed = true;
++
++	return genphy_c45_check_and_restart_aneg(phydev, changed);
++}
++
++static int bcm84881_aneg_done(struct phy_device *phydev)
++{
++	int bmsr, val;
++
++	val = phy_read_mmd(phydev, MDIO_MMD_AN, MDIO_STAT1);
++	if (val < 0)
++		return val;
++
++	bmsr = phy_read_mmd(phydev, MDIO_MMD_AN, MDIO_AN_C22 + MII_BMSR);
++	if (bmsr < 0)
++		return val;
++
++	return !!(val & MDIO_AN_STAT1_COMPLETE) &&
++	       !!(bmsr & BMSR_ANEGCOMPLETE);
++}
++
++static int bcm84881_read_status(struct phy_device *phydev)
++{
++	bool autoneg_complete;
++	unsigned int mode;
++	int bmsr, val;
++
++	val = phy_read_mmd(phydev, MDIO_MMD_AN, MDIO_CTRL1);
++	if (val < 0)
++		return val;
++
++	if (val & MDIO_AN_CTRL1_RESTART) {
++		phydev->link = 0;
++		return 0;
++	}
++
++	val = phy_read_mmd(phydev, MDIO_MMD_AN, MDIO_STAT1);
++	if (val < 0)
++		return val;
++
++	bmsr = phy_read_mmd(phydev, MDIO_MMD_AN, MDIO_AN_C22 + MII_BMSR);
++	if (bmsr < 0)
++		return val;
++
++	autoneg_complete = !!(val & MDIO_AN_STAT1_COMPLETE) &&
++			   !!(bmsr & BMSR_ANEGCOMPLETE);
++	phydev->link = !!(val & MDIO_STAT1_LSTATUS) &&
++		       !!(bmsr & BMSR_LSTATUS);
++	if (phydev->autoneg == AUTONEG_ENABLE && !autoneg_complete)
++		phydev->link = false;
++
++	if (!phydev->link)
++		return 0;
++
++	phydev->lp_advertising = 0;
++	phydev->speed = SPEED_UNKNOWN;
++	phydev->duplex = DUPLEX_UNKNOWN;
++	phydev->pause = 0;
++	phydev->asym_pause = 0;
++	phydev->mdix = 0;
++
++	if (autoneg_complete) {
++		val = genphy_c45_read_lpa(phydev);
++		if (val < 0)
++			return val;
++
++		val = phy_read_mmd(phydev, MDIO_MMD_AN,
++				   MDIO_AN_C22 + MII_STAT1000);
++		if (val < 0)
++			return val;
++
++		phydev->lp_advertising |= mii_stat1000_to_ethtool_lpa_t(val);
++
++		if (phydev->autoneg == AUTONEG_ENABLE)
++			phy_resolve_aneg_linkmode(phydev);
++	}
++
++	if (phydev->autoneg == AUTONEG_DISABLE) {
++		/* disabled autoneg doesn't seem to work, so force the link
++		 * down.
++		 */
++		phydev->link = 0;
++		return 0;
++	}
++
++	/* Set the host link mode - we set the phy interface mode and
++	 * the speed according to this register so that downshift works.
++	 * We leave the duplex setting as per the resolution from the
++	 * above.
++	 */
++	val = phy_read_mmd(phydev, MDIO_MMD_VEND1, 0x4011);
++	mode = (val & 0x1e) >> 1;
++	if (mode == 1 || mode == 2)
++		phydev->interface = PHY_INTERFACE_MODE_SGMII;
++	else if (mode == 3)
++		phydev->interface = PHY_INTERFACE_MODE_10GKR;
++	else if (mode == 4)
++		phydev->interface = PHY_INTERFACE_MODE_2500BASEX;
++	switch (mode & 7) {
++	case 1:
++		phydev->speed = SPEED_100;
++		break;
++	case 2:
++		phydev->speed = SPEED_1000;
++		break;
++	case 3:
++		phydev->speed = SPEED_10000;
++		break;
++	case 4:
++		phydev->speed = SPEED_2500;
++		break;
++	case 5:
++		phydev->speed = SPEED_5000;
++		break;
++	}
++
++	return genphy_c45_read_mdix(phydev);
++}
++
++static struct phy_driver bcm84881_drivers[] = {
++	{
++		.phy_id		= 0xae025150,
++		.phy_id_mask	= 0xfffffff0,
++		.name		= "Broadcom BCM84881",
++		.features	= SUPPORTED_100baseT_Full |
++				  SUPPORTED_100baseT_Half |
++				  SUPPORTED_1000baseT_Full |
++				  SUPPORTED_Autoneg |
++				  SUPPORTED_TP |
++				  SUPPORTED_FIBRE |
++				  SUPPORTED_10000baseT_Full |
++				  SUPPORTED_Backplane,
++		.config_init	= bcm84881_config_init,
++		.probe		= bcm84881_probe,
++		.config_aneg	= bcm84881_config_aneg,
++		.aneg_done	= bcm84881_aneg_done,
++		.read_status	= bcm84881_read_status,
++	},
++};
++
++module_phy_driver(bcm84881_drivers);
++
++/* FIXME: module auto-loading for Clause 45 PHYs seems non-functional */
++static struct mdio_device_id __maybe_unused bcm84881_tbl[] = {
++	{ 0xae025150, 0xfffffff0 },
++	{ },
++};
++MODULE_AUTHOR("Russell King");
++MODULE_DESCRIPTION("Broadcom BCM84881 PHY driver");
++MODULE_DEVICE_TABLE(mdio, bcm84881_tbl);
++MODULE_LICENSE("GPL");
diff --git a/target/linux/generic/pending-5.4/753-net-sfp-add-support-for-Clause-45-PHYs.patch b/target/linux/generic/pending-5.4/753-net-sfp-add-support-for-Clause-45-PHYs.patch
new file mode 100644
index 0000000000..ea26770841
--- /dev/null
+++ b/target/linux/generic/pending-5.4/753-net-sfp-add-support-for-Clause-45-PHYs.patch
@@ -0,0 +1,94 @@
+From 6df6709dc3d00e0bc948d45dfa8d8f18ba379c48 Mon Sep 17 00:00:00 2001
+From: Russell King <rmk+kernel@armlinux.org.uk>
+Date: Tue, 5 Nov 2019 11:56:18 +0000
+Subject: [PATCH 656/660] net: sfp: add support for Clause 45 PHYs
+
+Some SFP+ modules have a Clause 45 PHY onboard, which is accessible via
+the normal I2C address.  Detect 10G BASE-T PHYs which may have an
+accessible PHY and probe for it.
+
+Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
+---
+ drivers/net/phy/sfp.c | 44 +++++++++++++++++++++++++++++++++++++++----
+ 1 file changed, 40 insertions(+), 4 deletions(-)
+
+--- a/drivers/net/phy/sfp.c
++++ b/drivers/net/phy/sfp.c
+@@ -1337,12 +1337,12 @@ static void sfp_sm_phy_detach(struct sfp
+ 	sfp->mod_phy = NULL;
+ }
+ 
+-static void sfp_sm_probe_phy(struct sfp *sfp)
++static void sfp_sm_probe_phy(struct sfp *sfp, bool is_c45)
+ {
+ 	struct phy_device *phy;
+ 	int err;
+ 
+-	phy = mdiobus_scan(sfp->i2c_mii, SFP_PHY_ADDR);
++	phy = get_phy_device(sfp->i2c_mii, SFP_PHY_ADDR, is_c45);
+ 	if (phy == ERR_PTR(-ENODEV)) {
+ 		dev_info(sfp->dev, "no PHY detected\n");
+ 		return;
+@@ -1352,6 +1352,13 @@ static void sfp_sm_probe_phy(struct sfp
+ 		return;
+ 	}
+ 
++	err = phy_device_register(phy);
++	if (err) {
++		phy_device_free(phy);
++		dev_err(sfp->dev, "phy_device_register failed: %d\n", err);
++		return;
++	}
++
+ 	err = sfp_add_phy(sfp->sfp_bus, phy);
+ 	if (err) {
+ 		phy_device_remove(phy);
+@@ -1422,10 +1429,32 @@ static void sfp_sm_fault(struct sfp *sfp
+ 	}
+ }
+ 
++/* Probe a SFP for a PHY device if the module supports copper - the PHY
++ * normally sits at I2C bus address 0x56, and may either be a clause 22
++ * or clause 45 PHY.
++ *
++ * Clause 22 copper SFP modules normally operate in Cisco SGMII mode with
++ * negotiation enabled, but some may be in 1000base-X - which is for the
++ * PHY driver to determine.
++ *
++ * Clause 45 copper SFP+ modules (10G) appear to switch their interface
++ * mode according to the negotiated line speed.
++ */
+ static void sfp_sm_probe_for_phy(struct sfp *sfp)
+ {
+-	if (sfp->id.base.e1000_base_t)
+-		sfp_sm_probe_phy(sfp);
++	switch (sfp->id.base.extended_cc) {
++	case SFF8024_ECC_10GBASE_T_SFI:
++	case SFF8024_ECC_10GBASE_T_SR:
++	case SFF8024_ECC_5GBASE_T:
++	case SFF8024_ECC_2_5GBASE_T:
++		sfp_sm_probe_phy(sfp, true);
++		break;
++
++	default:
++		if (sfp->id.base.e1000_base_t)
++			sfp_sm_probe_phy(sfp, false);
++		break;
++	}
+ }
+ 
+ static int sfp_module_parse_power(struct sfp *sfp)
+@@ -1485,6 +1514,13 @@ static int sfp_sm_mod_hpower(struct sfp
+ 		return -EAGAIN;
+ 	}
+ 
++	/* DM7052 reports as a high power module, responds to reads (with
++	 * all bytes 0xff) at 0x51 but does not accept writes.  In any case,
++	 * if the bit is already set, we're already in high power mode.
++	 */
++	if (!!(val & BIT(0)) == enable)
++		return 0;
++
+ 	if (enable)
+ 		val |= BIT(0);
+ 	else
diff --git a/target/linux/generic/pending-5.4/754-net-sfp-fix-unbind.patch b/target/linux/generic/pending-5.4/754-net-sfp-fix-unbind.patch
new file mode 100644
index 0000000000..55fabafa81
--- /dev/null
+++ b/target/linux/generic/pending-5.4/754-net-sfp-fix-unbind.patch
@@ -0,0 +1,28 @@
+From 729fd05aac22cdf1e502fbf1bf80e5ebba0d9fbc Mon Sep 17 00:00:00 2001
+From: Russell King <rmk+kernel@armlinux.org.uk>
+Date: Tue, 3 Dec 2019 17:48:28 +0000
+Subject: [PATCH] net: sfp: fix unbind
+
+When unbinding, we don't correctly tear down the module state, leaving
+(for example) the hwmon registration behind. Ensure everything is
+properly removed by sending a remove event at unbind.
+
+Fixes: 6b0da5c9c1a3 ("net: sfp: track upstream's attachment state in state machine")
+Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
+---
+ drivers/net/phy/sfp.c | 4 ++++
+ 1 file changed, 4 insertions(+)
+
+--- a/drivers/net/phy/sfp.c
++++ b/drivers/net/phy/sfp.c
+@@ -2260,6 +2260,10 @@ static int sfp_remove(struct platform_de
+ 
+ 	sfp_unregister_socket(sfp->sfp_bus);
+ 
++	rtnl_lock();
++	sfp_sm_event(sfp, SFP_E_REMOVE);
++	rtnl_unlock();
++
+ 	return 0;
+ }
+ 
diff --git a/target/linux/generic/pending-5.4/755-net-sfp-fix-hwmon.patch b/target/linux/generic/pending-5.4/755-net-sfp-fix-hwmon.patch
new file mode 100644
index 0000000000..d003df4e13
--- /dev/null
+++ b/target/linux/generic/pending-5.4/755-net-sfp-fix-hwmon.patch
@@ -0,0 +1,44 @@
+From 5eb0df5023c6ae8a71a7848fd5e1f788d86e51ae Mon Sep 17 00:00:00 2001
+From: Russell King <rmk+kernel@armlinux.org.uk>
+Date: Tue, 3 Dec 2019 18:46:04 +0000
+Subject: [PATCH] net: sfp: fix hwmon
+
+The referenced commit below allowed more than one hwmon device to be
+created per SFP, which is definitely not what we want. Avoid this by
+only creating the hwmon device just as we transition to WAITDEV state.
+
+Fixes: 139d3a212a1f ("net: sfp: allow modules with slow diagnostics to probe")
+Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
+---
+ drivers/net/phy/sfp.c | 13 ++++---------
+ 1 file changed, 4 insertions(+), 9 deletions(-)
+
+--- a/drivers/net/phy/sfp.c
++++ b/drivers/net/phy/sfp.c
+@@ -1731,6 +1731,10 @@ static void sfp_sm_module(struct sfp *sf
+ 			break;
+ 		}
+ 
++		err = sfp_hwmon_insert(sfp);
++		if (err)
++			dev_warn(sfp->dev, "hwmon probe failed: %d\n", err);
++
+ 		sfp_sm_mod_next(sfp, SFP_MOD_WAITDEV, 0);
+ 		/* fall through */
+ 	case SFP_MOD_WAITDEV:
+@@ -1780,15 +1784,6 @@ static void sfp_sm_module(struct sfp *sf
+ 	case SFP_MOD_ERROR:
+ 		break;
+ 	}
+-
+-#if IS_ENABLED(CONFIG_HWMON)
+-	if (sfp->sm_mod_state >= SFP_MOD_WAITDEV &&
+-	    IS_ERR_OR_NULL(sfp->hwmon_dev)) {
+-		err = sfp_hwmon_insert(sfp);
+-		if (err)
+-			dev_warn(sfp->dev, "hwmon probe failed: %d\n", err);
+-	}
+-#endif
+ }
+ 
+ static void sfp_sm_main(struct sfp *sfp, unsigned int event)
diff --git a/target/linux/generic/pending-5.4/756-net-sfp-use-a-definition-for-the-fault-recovery-atte.patch b/target/linux/generic/pending-5.4/756-net-sfp-use-a-definition-for-the-fault-recovery-atte.patch
new file mode 100644
index 0000000000..8362f73f46
--- /dev/null
+++ b/target/linux/generic/pending-5.4/756-net-sfp-use-a-definition-for-the-fault-recovery-atte.patch
@@ -0,0 +1,55 @@
+From 4d6bfb6fbb00af38402db4d1ce464e22def9fd9e Mon Sep 17 00:00:00 2001
+From: Russell King <rmk+kernel@armlinux.org.uk>
+Date: Thu, 28 Nov 2019 14:24:40 +0000
+Subject: [PATCH 1/4] net: sfp: use a definition for the fault recovery
+ attempts
+
+Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
+---
+ drivers/net/phy/sfp.c | 14 +++++++++++---
+ 1 file changed, 11 insertions(+), 3 deletions(-)
+
+--- a/drivers/net/phy/sfp.c
++++ b/drivers/net/phy/sfp.c
+@@ -170,6 +170,14 @@ static const enum gpiod_flags gpio_flags
+ #define T_RESET_US		10
+ #define T_FAULT_RECOVER		msecs_to_jiffies(1000)
+ 
++/* N_FAULT_INIT is the number of recovery attempts at module initialisation
++ * time. If the TX_FAULT signal is not deasserted after this number of
++ * attempts at clearing it, we decide that the module is faulty.
++ * N_FAULT is the same but after the module has initialised.
++ */
++#define N_FAULT_INIT		5
++#define N_FAULT			5
++
+ /* SFP module presence detection is poor: the three MOD DEF signals are
+  * the same length on the PCB, which means it's possible for MOD DEF 0 to
+  * connect before the I2C bus on MOD DEF 1/2.
+@@ -1820,7 +1828,7 @@ static void sfp_sm_main(struct sfp *sfp,
+ 		sfp_module_tx_enable(sfp);
+ 
+ 		/* Initialise the fault clearance retries */
+-		sfp->sm_retries = 5;
++		sfp->sm_retries = N_FAULT_INIT;
+ 
+ 		/* We need to check the TX_FAULT state, which is not defined
+ 		 * while TX_DISABLE is asserted. The earliest we want to do
+@@ -1860,7 +1868,7 @@ static void sfp_sm_main(struct sfp *sfp,
+ 			 * or t_start_up, so assume there is a fault.
+ 			 */
+ 			sfp_sm_fault(sfp, SFP_S_INIT_TX_FAULT,
+-				     sfp->sm_retries == 5);
++				     sfp->sm_retries == N_FAULT_INIT);
+ 		} else if (event == SFP_E_TIMEOUT || event == SFP_E_TX_CLEAR) {
+ 	init_done:	/* TX_FAULT deasserted or we timed out with TX_FAULT
+ 			 * clear.  Probe for the PHY and check the LOS state.
+@@ -1873,7 +1881,7 @@ static void sfp_sm_main(struct sfp *sfp,
+ 			sfp_sm_link_check_los(sfp);
+ 
+ 			/* Reset the fault retry count */
+-			sfp->sm_retries = 5;
++			sfp->sm_retries = N_FAULT;
+ 		}
+ 		break;
+ 
diff --git a/target/linux/generic/pending-5.4/757-net-sfp-rename-sm_retries.patch b/target/linux/generic/pending-5.4/757-net-sfp-rename-sm_retries.patch
new file mode 100644
index 0000000000..c6f43729da
--- /dev/null
+++ b/target/linux/generic/pending-5.4/757-net-sfp-rename-sm_retries.patch
@@ -0,0 +1,60 @@
+From bfa3cbb01c7ea34d7369c9bd2ec1b2dc67082b04 Mon Sep 17 00:00:00 2001
+From: Russell King <rmk+kernel@armlinux.org.uk>
+Date: Mon, 2 Dec 2019 18:06:44 +0000
+Subject: [PATCH 2/4] net: sfp: rename sm_retries
+
+Rename sm_retries as sm_fault_retries, as this is what this member is
+tracking.
+
+Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
+---
+ drivers/net/phy/sfp.c | 10 +++++-----
+ 1 file changed, 5 insertions(+), 5 deletions(-)
+
+--- a/drivers/net/phy/sfp.c
++++ b/drivers/net/phy/sfp.c
+@@ -232,7 +232,7 @@ struct sfp {
+ 	unsigned char sm_mod_tries;
+ 	unsigned char sm_dev_state;
+ 	unsigned short sm_state;
+-	unsigned int sm_retries;
++	unsigned char sm_fault_retries;
+ 
+ 	struct sfp_eeprom_id id;
+ 	unsigned int module_power_mW;
+@@ -1425,7 +1425,7 @@ static bool sfp_los_event_inactive(struc
+ 
+ static void sfp_sm_fault(struct sfp *sfp, unsigned int next_state, bool warn)
+ {
+-	if (sfp->sm_retries && !--sfp->sm_retries) {
++	if (sfp->sm_fault_retries && !--sfp->sm_fault_retries) {
+ 		dev_err(sfp->dev,
+ 			"module persistently indicates fault, disabling\n");
+ 		sfp_sm_next(sfp, SFP_S_TX_DISABLE, 0);
+@@ -1828,7 +1828,7 @@ static void sfp_sm_main(struct sfp *sfp,
+ 		sfp_module_tx_enable(sfp);
+ 
+ 		/* Initialise the fault clearance retries */
+-		sfp->sm_retries = N_FAULT_INIT;
++		sfp->sm_fault_retries = N_FAULT_INIT;
+ 
+ 		/* We need to check the TX_FAULT state, which is not defined
+ 		 * while TX_DISABLE is asserted. The earliest we want to do
+@@ -1868,7 +1868,7 @@ static void sfp_sm_main(struct sfp *sfp,
+ 			 * or t_start_up, so assume there is a fault.
+ 			 */
+ 			sfp_sm_fault(sfp, SFP_S_INIT_TX_FAULT,
+-				     sfp->sm_retries == N_FAULT_INIT);
++				     sfp->sm_fault_retries == N_FAULT_INIT);
+ 		} else if (event == SFP_E_TIMEOUT || event == SFP_E_TX_CLEAR) {
+ 	init_done:	/* TX_FAULT deasserted or we timed out with TX_FAULT
+ 			 * clear.  Probe for the PHY and check the LOS state.
+@@ -1881,7 +1881,7 @@ static void sfp_sm_main(struct sfp *sfp,
+ 			sfp_sm_link_check_los(sfp);
+ 
+ 			/* Reset the fault retry count */
+-			sfp->sm_retries = N_FAULT;
++			sfp->sm_fault_retries = N_FAULT;
+ 		}
+ 		break;
+ 
diff --git a/target/linux/generic/pending-5.4/758-net-sfp-error-handling-for-phy-probe.patch b/target/linux/generic/pending-5.4/758-net-sfp-error-handling-for-phy-probe.patch
new file mode 100644
index 0000000000..8191e622a1
--- /dev/null
+++ b/target/linux/generic/pending-5.4/758-net-sfp-error-handling-for-phy-probe.patch
@@ -0,0 +1,97 @@
+From 1fba543dc8edf4a43bff3276306648bb27c1e207 Mon Sep 17 00:00:00 2001
+From: Russell King <rmk+kernel@armlinux.org.uk>
+Date: Fri, 29 Nov 2019 00:30:08 +0000
+Subject: [PATCH 3/4] net: sfp: error handling for phy probe
+
+Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
+---
+ drivers/net/phy/sfp.c | 26 +++++++++++++++++---------
+ 1 file changed, 17 insertions(+), 9 deletions(-)
+
+--- a/drivers/net/phy/sfp.c
++++ b/drivers/net/phy/sfp.c
+@@ -1345,7 +1345,7 @@ static void sfp_sm_phy_detach(struct sfp
+ 	sfp->mod_phy = NULL;
+ }
+ 
+-static void sfp_sm_probe_phy(struct sfp *sfp, bool is_c45)
++static int sfp_sm_probe_phy(struct sfp *sfp, bool is_c45)
+ {
+ 	struct phy_device *phy;
+ 	int err;
+@@ -1353,18 +1353,18 @@ static void sfp_sm_probe_phy(struct sfp
+ 	phy = get_phy_device(sfp->i2c_mii, SFP_PHY_ADDR, is_c45);
+ 	if (phy == ERR_PTR(-ENODEV)) {
+ 		dev_info(sfp->dev, "no PHY detected\n");
+-		return;
++		return 0;
+ 	}
+ 	if (IS_ERR(phy)) {
+ 		dev_err(sfp->dev, "mdiobus scan returned %ld\n", PTR_ERR(phy));
+-		return;
++		return PTR_ERR(phy);
+ 	}
+ 
+ 	err = phy_device_register(phy);
+ 	if (err) {
+ 		phy_device_free(phy);
+ 		dev_err(sfp->dev, "phy_device_register failed: %d\n", err);
+-		return;
++		return err;
+ 	}
+ 
+ 	err = sfp_add_phy(sfp->sfp_bus, phy);
+@@ -1372,10 +1372,12 @@ static void sfp_sm_probe_phy(struct sfp
+ 		phy_device_remove(phy);
+ 		phy_device_free(phy);
+ 		dev_err(sfp->dev, "sfp_add_phy failed: %d\n", err);
+-		return;
++		return err;
+ 	}
+ 
+ 	sfp->mod_phy = phy;
++
++	return 0;
+ }
+ 
+ static void sfp_sm_link_up(struct sfp *sfp)
+@@ -1448,21 +1450,24 @@ static void sfp_sm_fault(struct sfp *sfp
+  * Clause 45 copper SFP+ modules (10G) appear to switch their interface
+  * mode according to the negotiated line speed.
+  */
+-static void sfp_sm_probe_for_phy(struct sfp *sfp)
++static int sfp_sm_probe_for_phy(struct sfp *sfp)
+ {
++	int err = 0;
++
+ 	switch (sfp->id.base.extended_cc) {
+ 	case SFF8024_ECC_10GBASE_T_SFI:
+ 	case SFF8024_ECC_10GBASE_T_SR:
+ 	case SFF8024_ECC_5GBASE_T:
+ 	case SFF8024_ECC_2_5GBASE_T:
+-		sfp_sm_probe_phy(sfp, true);
++		err = sfp_sm_probe_phy(sfp, true);
+ 		break;
+ 
+ 	default:
+ 		if (sfp->id.base.e1000_base_t)
+-			sfp_sm_probe_phy(sfp, false);
++			err = sfp_sm_probe_phy(sfp, false);
+ 		break;
+ 	}
++	return err;
+ }
+ 
+ static int sfp_module_parse_power(struct sfp *sfp)
+@@ -1873,7 +1878,10 @@ static void sfp_sm_main(struct sfp *sfp,
+ 	init_done:	/* TX_FAULT deasserted or we timed out with TX_FAULT
+ 			 * clear.  Probe for the PHY and check the LOS state.
+ 			 */
+-			sfp_sm_probe_for_phy(sfp);
++			if (sfp_sm_probe_for_phy(sfp)) {
++				sfp_sm_next(sfp, SFP_S_FAIL, 0);
++				break;
++			}
+ 			if (sfp_module_start(sfp->sfp_bus)) {
+ 				sfp_sm_next(sfp, SFP_S_FAIL, 0);
+ 				break;
diff --git a/target/linux/generic/pending-5.4/759-net-sfp-re-attempt-probing-for-phy.patch b/target/linux/generic/pending-5.4/759-net-sfp-re-attempt-probing-for-phy.patch
new file mode 100644
index 0000000000..46d987344f
--- /dev/null
+++ b/target/linux/generic/pending-5.4/759-net-sfp-re-attempt-probing-for-phy.patch
@@ -0,0 +1,132 @@
+From 6c4efe83a0acf6f06c89ae17b885fa5739eb5be7 Mon Sep 17 00:00:00 2001
+From: Russell King <rmk+kernel@armlinux.org.uk>
+Date: Mon, 2 Dec 2019 18:20:22 +0000
+Subject: [PATCH 4/4] net: sfp: re-attempt probing for phy
+
+Some 1000BASE-T PHY modules take a while for the PHY to wake up.
+Retry the probe a number of times before deciding that the module has
+no PHY.
+
+Tested with:
+ Sourcephotonics SPGBTXCNFC - PHY takes less than 50ms to respond.
+ Champion One 1000SFPT - PHY takes about 200ms to respond.
+ Mikrotik S-RJ01 - no PHY
+
+Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
+---
+ drivers/net/phy/sfp.c | 59 ++++++++++++++++++++++++++++++++++++---------------
+ 1 file changed, 42 insertions(+), 17 deletions(-)
+
+--- a/drivers/net/phy/sfp.c
++++ b/drivers/net/phy/sfp.c
+@@ -60,6 +60,7 @@ enum {
+ 	SFP_S_FAIL,
+ 	SFP_S_WAIT,
+ 	SFP_S_INIT,
++	SFP_S_INIT_PHY,
+ 	SFP_S_INIT_TX_FAULT,
+ 	SFP_S_WAIT_LOS,
+ 	SFP_S_LINK_UP,
+@@ -124,6 +125,7 @@ static const char * const sm_state_strin
+ 	[SFP_S_FAIL] = "fail",
+ 	[SFP_S_WAIT] = "wait",
+ 	[SFP_S_INIT] = "init",
++	[SFP_S_INIT_PHY] = "init_phy",
+ 	[SFP_S_INIT_TX_FAULT] = "init_tx_fault",
+ 	[SFP_S_WAIT_LOS] = "wait_los",
+ 	[SFP_S_LINK_UP] = "link_up",
+@@ -178,6 +180,12 @@ static const enum gpiod_flags gpio_flags
+ #define N_FAULT_INIT		5
+ #define N_FAULT			5
+ 
++/* T_PHY_RETRY is the time interval between attempts to probe the PHY.
++ * R_PHY_RETRY is the number of attempts.
++ */
++#define T_PHY_RETRY		msecs_to_jiffies(50)
++#define R_PHY_RETRY		12
++
+ /* SFP module presence detection is poor: the three MOD DEF signals are
+  * the same length on the PCB, which means it's possible for MOD DEF 0 to
+  * connect before the I2C bus on MOD DEF 1/2.
+@@ -233,6 +241,7 @@ struct sfp {
+ 	unsigned char sm_dev_state;
+ 	unsigned short sm_state;
+ 	unsigned char sm_fault_retries;
++	unsigned char sm_phy_retries;
+ 
+ 	struct sfp_eeprom_id id;
+ 	unsigned int module_power_mW;
+@@ -1351,10 +1360,8 @@ static int sfp_sm_probe_phy(struct sfp *
+ 	int err;
+ 
+ 	phy = get_phy_device(sfp->i2c_mii, SFP_PHY_ADDR, is_c45);
+-	if (phy == ERR_PTR(-ENODEV)) {
+-		dev_info(sfp->dev, "no PHY detected\n");
+-		return 0;
+-	}
++	if (phy == ERR_PTR(-ENODEV))
++		return PTR_ERR(phy);
+ 	if (IS_ERR(phy)) {
+ 		dev_err(sfp->dev, "mdiobus scan returned %ld\n", PTR_ERR(phy));
+ 		return PTR_ERR(phy);
+@@ -1802,6 +1809,7 @@ static void sfp_sm_module(struct sfp *sf
+ static void sfp_sm_main(struct sfp *sfp, unsigned int event)
+ {
+ 	unsigned long timeout;
++	int ret;
+ 
+ 	/* Some events are global */
+ 	if (sfp->sm_state != SFP_S_DOWN &&
+@@ -1875,22 +1883,39 @@ static void sfp_sm_main(struct sfp *sfp,
+ 			sfp_sm_fault(sfp, SFP_S_INIT_TX_FAULT,
+ 				     sfp->sm_fault_retries == N_FAULT_INIT);
+ 		} else if (event == SFP_E_TIMEOUT || event == SFP_E_TX_CLEAR) {
+-	init_done:	/* TX_FAULT deasserted or we timed out with TX_FAULT
+-			 * clear.  Probe for the PHY and check the LOS state.
+-			 */
+-			if (sfp_sm_probe_for_phy(sfp)) {
+-				sfp_sm_next(sfp, SFP_S_FAIL, 0);
+-				break;
+-			}
+-			if (sfp_module_start(sfp->sfp_bus)) {
+-				sfp_sm_next(sfp, SFP_S_FAIL, 0);
++	init_done:
++			sfp->sm_phy_retries = R_PHY_RETRY;
++			goto phy_probe;
++		}
++		break;
++
++	case SFP_S_INIT_PHY:
++		if (event != SFP_E_TIMEOUT)
++			break;
++	phy_probe:
++		/* TX_FAULT deasserted or we timed out with TX_FAULT
++		 * clear.  Probe for the PHY and check the LOS state.
++		 */
++		ret = sfp_sm_probe_for_phy(sfp);
++		if (ret == -ENODEV) {
++			if (--sfp->sm_phy_retries) {
++				sfp_sm_next(sfp, SFP_S_INIT_PHY, T_PHY_RETRY);
+ 				break;
++			} else {
++				dev_info(sfp->dev, "no PHY detected\n");
+ 			}
+-			sfp_sm_link_check_los(sfp);
+-
+-			/* Reset the fault retry count */
+-			sfp->sm_fault_retries = N_FAULT;
++		} else if (ret) {
++			sfp_sm_next(sfp, SFP_S_FAIL, 0);
++			break;
+ 		}
++		if (sfp_module_start(sfp->sfp_bus)) {
++			sfp_sm_next(sfp, SFP_S_FAIL, 0);
++			break;
++		}
++		sfp_sm_link_check_los(sfp);
++
++		/* Reset the fault retry count */
++		sfp->sm_fault_retries = N_FAULT;
+ 		break;
+ 
+ 	case SFP_S_INIT_TX_FAULT:
diff --git a/target/linux/generic/pending-5.4/800-bcma-get-SoC-device-struct-copy-its-DMA-params-to-th.patch b/target/linux/generic/pending-5.4/800-bcma-get-SoC-device-struct-copy-its-DMA-params-to-th.patch
new file mode 100644
index 0000000000..cb02c71829
--- /dev/null
+++ b/target/linux/generic/pending-5.4/800-bcma-get-SoC-device-struct-copy-its-DMA-params-to-th.patch
@@ -0,0 +1,70 @@
+From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <rafal@milecki.pl>
+Subject: [PATCH] bcma: get SoC device struct & copy its DMA params to the
+ subdevices
+MIME-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+
+For bus devices to be fully usable it's required to set their DMA
+parameters.
+
+For years it has been missing and remained unnoticed because of
+mips_dma_alloc_coherent() silently handling the empty coherent_dma_mask.
+Kernel 4.19 came with a lot of DMA changes and caused a regression on
+the bcm47xx. Starting with the commit f8c55dc6e828 ("MIPS: use generic
+dma noncoherent ops for simple noncoherent platforms") DMA coherent
+allocations just fail. Example:
+[    1.114914] bgmac_bcma bcma0:2: Allocation of TX ring 0x200 failed
+[    1.121215] bgmac_bcma bcma0:2: Unable to alloc memory for DMA
+[    1.127626] bgmac_bcma: probe of bcma0:2 failed with error -12
+[    1.133838] bgmac_bcma: Broadcom 47xx GBit MAC driver loaded
+
+This change fixes above regression in addition to the MIPS bcm47xx
+commit 321c46b91550 ("MIPS: BCM47XX: Setup struct device for the SoC").
+
+It also fixes another *old* GPIO regression caused by a parent pointing
+to the NULL:
+[    0.157054] missing gpiochip .dev parent pointer
+[    0.157287] bcma: bus0: Error registering GPIO driver: -22
+introduced by the commit 74f4e0cc6108 ("bcma: switch GPIO portions to
+use GPIOLIB_IRQCHIP").
+
+Fixes: f8c55dc6e828 ("MIPS: use generic dma noncoherent ops for simple noncoherent platforms")
+Fixes: 74f4e0cc6108 ("bcma: switch GPIO portions to use GPIOLIB_IRQCHIP")
+Cc: linux-mips@linux-mips.org
+Cc: Christoph Hellwig <hch@lst.de>
+Cc: Linus Walleij <linus.walleij@linaro.org>
+Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
+---
+
+--- a/drivers/bcma/host_soc.c
++++ b/drivers/bcma/host_soc.c
+@@ -191,6 +191,8 @@ int __init bcma_host_soc_init(struct bcm
+ 	struct bcma_bus *bus = &soc->bus;
+ 	int err;
+ 
++	bus->dev = soc->dev;
++
+ 	/* Scan bus and initialize it */
+ 	err = bcma_bus_early_register(bus);
+ 	if (err)
+--- a/drivers/bcma/main.c
++++ b/drivers/bcma/main.c
+@@ -236,12 +236,16 @@ EXPORT_SYMBOL(bcma_core_irq);
+ 
+ void bcma_prepare_core(struct bcma_bus *bus, struct bcma_device *core)
+ {
++	struct device *dev = &core->dev;
++
+ 	core->dev.release = bcma_release_core_dev;
+ 	core->dev.bus = &bcma_bus_type;
+ 	dev_set_name(&core->dev, "bcma%d:%d", bus->num, core->core_index);
+ 	core->dev.parent = bus->dev;
+-	if (bus->dev)
++	if (bus->dev) {
+ 		bcma_of_fill_device(bus->dev, core);
++		dma_coerce_mask_and_coherent(dev, bus->dev->coherent_dma_mask);
++	}
+ 
+ 	switch (bus->hosttype) {
+ 	case BCMA_HOSTTYPE_PCI:
diff --git a/target/linux/generic/pending-5.4/810-pci_disable_common_quirks.patch b/target/linux/generic/pending-5.4/810-pci_disable_common_quirks.patch
new file mode 100644
index 0000000000..c8c28b5175
--- /dev/null
+++ b/target/linux/generic/pending-5.4/810-pci_disable_common_quirks.patch
@@ -0,0 +1,62 @@
+From: Gabor Juhos <juhosg@openwrt.org>
+Subject: debloat: add kernel config option to disabling common PCI quirks
+
+Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
+---
+ drivers/pci/Kconfig  | 6 ++++++
+ drivers/pci/quirks.c | 6 ++++++
+ 2 files changed, 12 insertions(+)
+
+--- a/drivers/pci/Kconfig
++++ b/drivers/pci/Kconfig
+@@ -89,6 +89,13 @@ config XEN_PCIDEV_FRONTEND
+           The PCI device frontend driver allows the kernel to import arbitrary
+           PCI devices from a PCI backend to support PCI driver domains.
+ 
++config PCI_DISABLE_COMMON_QUIRKS
++	bool "PCI disable common quirks"
++	depends on PCI
++	help
++	  If you don't know what to do here, say N.
++
++
+ config PCI_ATS
+ 	bool
+ 
+--- a/drivers/pci/quirks.c
++++ b/drivers/pci/quirks.c
+@@ -207,6 +207,7 @@ static void quirk_mmio_always_on(struct
+ DECLARE_PCI_FIXUP_CLASS_EARLY(PCI_ANY_ID, PCI_ANY_ID,
+ 				PCI_CLASS_BRIDGE_HOST, 8, quirk_mmio_always_on);
+ 
++#ifndef CONFIG_PCI_DISABLE_COMMON_QUIRKS
+ /*
+  * The Mellanox Tavor device gives false positive parity errors.  Mark this
+  * device with a broken_parity_status to allow PCI scanning code to "skip"
+@@ -3152,6 +3153,8 @@ DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_I
+ DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x65f9, quirk_intel_mc_errata);
+ DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x65fa, quirk_intel_mc_errata);
+ 
++#endif /* !CONFIG_PCI_DISABLE_COMMON_QUIRKS */
++
+ /*
+  * Ivytown NTB BAR sizes are misreported by the hardware due to an erratum.
+  * To work around this, query the size it should be configured to by the
+@@ -3177,6 +3180,8 @@ static void quirk_intel_ntb(struct pci_d
+ DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x0e08, quirk_intel_ntb);
+ DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x0e0d, quirk_intel_ntb);
+ 
++#ifndef CONFIG_PCI_DISABLE_COMMON_QUIRKS
++
+ /*
+  * Some BIOS implementations leave the Intel GPU interrupts enabled, even
+  * though no one is handling them (e.g., if the i915 driver is never
+@@ -3215,6 +3220,8 @@ DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_IN
+ DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x010a, disable_igfx_irq);
+ DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x0152, disable_igfx_irq);
+ 
++#endif /* !CONFIG_PCI_DISABLE_COMMON_QUIRKS */
++
+ /*
+  * PCI devices which are on Intel chips can skip the 10ms delay
+  * before entering D3 mode.
diff --git a/target/linux/generic/pending-5.4/811-pci_disable_usb_common_quirks.patch b/target/linux/generic/pending-5.4/811-pci_disable_usb_common_quirks.patch
new file mode 100644
index 0000000000..848aecaa87
--- /dev/null
+++ b/target/linux/generic/pending-5.4/811-pci_disable_usb_common_quirks.patch
@@ -0,0 +1,115 @@
+From: Felix Fietkau <nbd@nbd.name>
+Subject: debloat: disable common USB quirks
+
+Signed-off-by: Felix Fietkau <nbd@nbd.name>
+---
+ drivers/usb/host/pci-quirks.c | 16 ++++++++++++++++
+ drivers/usb/host/pci-quirks.h | 18 +++++++++++++++++-
+ include/linux/usb/hcd.h       |  7 +++++++
+ 3 files changed, 40 insertions(+), 1 deletion(-)
+
+--- a/drivers/usb/host/pci-quirks.c
++++ b/drivers/usb/host/pci-quirks.c
+@@ -125,6 +125,8 @@ struct amd_chipset_type {
+ 	u8 rev;
+ };
+ 
++#ifndef CONFIG_PCI_DISABLE_COMMON_QUIRKS
++
+ static struct amd_chipset_info {
+ 	struct pci_dev	*nb_dev;
+ 	struct pci_dev	*smbus_dev;
+@@ -628,6 +630,10 @@ bool usb_amd_pt_check_port(struct device
+ }
+ EXPORT_SYMBOL_GPL(usb_amd_pt_check_port);
+ 
++#endif /* CONFIG_PCI_DISABLE_COMMON_QUIRKS */
++
++#if IS_ENABLED(CONFIG_USB_UHCI_HCD)
++
+ /*
+  * Make sure the controller is completely inactive, unable to
+  * generate interrupts or do DMA.
+@@ -707,8 +713,17 @@ reset_needed:
+ 	uhci_reset_hc(pdev, base);
+ 	return 1;
+ }
++#else
++int uhci_check_and_reset_hc(struct pci_dev *pdev, unsigned long base)
++{
++	return 0;
++}
++
++#endif
+ EXPORT_SYMBOL_GPL(uhci_check_and_reset_hc);
+ 
++#ifndef CONFIG_PCI_DISABLE_COMMON_QUIRKS
++
+ static inline int io_type_enabled(struct pci_dev *pdev, unsigned int mask)
+ {
+ 	u16 cmd;
+@@ -1275,3 +1290,4 @@ static void quirk_usb_early_handoff(stru
+ }
+ DECLARE_PCI_FIXUP_CLASS_FINAL(PCI_ANY_ID, PCI_ANY_ID,
+ 			PCI_CLASS_SERIAL_USB, 8, quirk_usb_early_handoff);
++#endif
+--- a/drivers/usb/host/pci-quirks.h
++++ b/drivers/usb/host/pci-quirks.h
+@@ -5,6 +5,9 @@
+ #ifdef CONFIG_USB_PCI
+ void uhci_reset_hc(struct pci_dev *pdev, unsigned long base);
+ int uhci_check_and_reset_hc(struct pci_dev *pdev, unsigned long base);
++#endif  /* CONFIG_USB_PCI */
++
++#if defined(CONFIG_USB_PCI) && !defined(CONFIG_PCI_DISABLE_COMMON_QUIRKS)
+ int usb_amd_find_chipset_info(void);
+ int usb_hcd_amd_remote_wakeup_quirk(struct pci_dev *pdev);
+ bool usb_amd_hang_symptom_quirk(void);
+@@ -19,6 +22,18 @@ void sb800_prefetch(struct device *dev,
+ bool usb_amd_pt_check_port(struct device *device, int port);
+ #else
+ struct pci_dev;
++static inline int usb_amd_find_chipset_info(void)
++{
++	return 0;
++}
++static inline bool usb_amd_hang_symptom_quirk(void)
++{
++	return false;
++}
++static inline bool usb_amd_prefetch_quirk(void)
++{
++	return false;
++}
+ static inline void usb_amd_quirk_pll_disable(void) {}
+ static inline void usb_amd_quirk_pll_enable(void) {}
+ static inline void usb_asmedia_modifyflowcontrol(struct pci_dev *pdev) {}
+@@ -29,6 +44,11 @@ static inline bool usb_amd_pt_check_port
+ {
+ 	return false;
+ }
++static inline void usb_enable_intel_xhci_ports(struct pci_dev *xhci_pdev) {}
++static inline bool usb_xhci_needs_pci_reset(struct pci_dev *pdev)
++{
++	return false;
++}
+ #endif  /* CONFIG_USB_PCI */
+ 
+ #endif  /*  __LINUX_USB_PCI_QUIRKS_H  */
+--- a/include/linux/usb/hcd.h
++++ b/include/linux/usb/hcd.h
+@@ -473,7 +473,14 @@ extern int usb_hcd_pci_probe(struct pci_
+ extern void usb_hcd_pci_remove(struct pci_dev *dev);
+ extern void usb_hcd_pci_shutdown(struct pci_dev *dev);
+ 
++#ifndef CONFIG_PCI_DISABLE_COMMON_QUIRKS
+ extern int usb_hcd_amd_remote_wakeup_quirk(struct pci_dev *dev);
++#else
++static inline int usb_hcd_amd_remote_wakeup_quirk(struct pci_dev *dev)
++{
++	return 0;
++}
++#endif
+ 
+ #ifdef CONFIG_PM
+ extern const struct dev_pm_ops usb_hcd_pci_pm_ops;
diff --git a/target/linux/generic/pending-5.4/834-ledtrig-libata.patch b/target/linux/generic/pending-5.4/834-ledtrig-libata.patch
new file mode 100644
index 0000000000..f1dc0e5995
--- /dev/null
+++ b/target/linux/generic/pending-5.4/834-ledtrig-libata.patch
@@ -0,0 +1,149 @@
+From: Daniel Golle <daniel@makrotopia.org>
+Subject: libata: add ledtrig support
+
+This adds a LED trigger for each ATA port indicating disk activity.
+
+As this is needed only on specific platforms (NAS SoCs and such),
+these platforms should define ARCH_WANTS_LIBATA_LEDS if there
+are boards with LED(s) intended to indicate ATA disk activity and
+need the OS to take care of that.
+In that way, if not selected, LED trigger support not will be
+included in libata-core and both, codepaths and structures remain
+untouched.
+
+Signed-off-by: Daniel Golle <daniel@makrotopia.org>
+---
+ drivers/ata/Kconfig       | 16 ++++++++++++++++
+ drivers/ata/libata-core.c | 41 +++++++++++++++++++++++++++++++++++++++++
+ include/linux/libata.h    |  9 +++++++++
+ 3 files changed, 66 insertions(+)
+
+--- a/drivers/ata/Kconfig
++++ b/drivers/ata/Kconfig
+@@ -46,6 +46,22 @@ config ATA_VERBOSE_ERROR
+ 
+ 	  If unsure, say Y.
+ 
++config ARCH_WANT_LIBATA_LEDS
++	bool
++
++config ATA_LEDS
++	bool "support ATA port LED triggers"
++	depends on ARCH_WANT_LIBATA_LEDS
++	select NEW_LEDS
++	select LEDS_CLASS
++	select LEDS_TRIGGERS
++	default y
++	help
++	  This option adds a LED trigger for each registered ATA port.
++	  It is used to drive disk activity leds connected via GPIO.
++
++	  If unsure, say N.
++
+ config ATA_ACPI
+ 	bool "ATA ACPI Support"
+ 	depends on ACPI
+--- a/drivers/ata/libata-core.c
++++ b/drivers/ata/libata-core.c
+@@ -731,6 +731,19 @@ u64 ata_tf_read_block(const struct ata_t
+ 	return block;
+ }
+ 
++#ifdef CONFIG_ATA_LEDS
++#define LIBATA_BLINK_DELAY 20 /* ms */
++static inline void ata_led_act(struct ata_port *ap)
++{
++	unsigned long led_delay = LIBATA_BLINK_DELAY;
++
++	if (unlikely(!ap->ledtrig))
++		return;
++
++	led_trigger_blink_oneshot(ap->ledtrig, &led_delay, &led_delay, 0);
++}
++#endif
++
+ /**
+  *	ata_build_rw_tf - Build ATA taskfile for given read/write request
+  *	@tf: Target ATA taskfile
+@@ -5134,6 +5147,9 @@ struct ata_queued_cmd *ata_qc_new_init(s
+ 		if (tag < 0)
+ 			return NULL;
+ 	}
++#ifdef CONFIG_ATA_LEDS
++	ata_led_act(ap);
++#endif
+ 
+ 	qc = __ata_qc_from_tag(ap, tag);
+ 	qc->tag = qc->hw_tag = tag;
+@@ -6068,6 +6084,9 @@ struct ata_port *ata_port_alloc(struct a
+ 	ap->stats.unhandled_irq = 1;
+ 	ap->stats.idle_irq = 1;
+ #endif
++#ifdef CONFIG_ATA_LEDS
++	ap->ledtrig = kzalloc(sizeof(struct led_trigger), GFP_KERNEL);
++#endif
+ 	ata_sff_port_init(ap);
+ 
+ 	return ap;
+@@ -6103,6 +6122,12 @@ static void ata_host_release(struct kref
+ 
+ 		kfree(ap->pmp_link);
+ 		kfree(ap->slave_link);
++#ifdef CONFIG_ATA_LEDS
++		if (ap->ledtrig) {
++			led_trigger_unregister(ap->ledtrig);
++			kfree(ap->ledtrig);
++		};
++#endif
+ 		kfree(ap);
+ 		host->ports[i] = NULL;
+ 	}
+@@ -6566,7 +6591,23 @@ int ata_host_register(struct ata_host *h
+ 		host->ports[i]->print_id = atomic_inc_return(&ata_print_id);
+ 		host->ports[i]->local_port_no = i + 1;
+ 	}
++#ifdef CONFIG_ATA_LEDS
++	for (i = 0; i < host->n_ports; i++) {
++		if (unlikely(!host->ports[i]->ledtrig))
++			continue;
+ 
++		snprintf(host->ports[i]->ledtrig_name,
++			sizeof(host->ports[i]->ledtrig_name), "ata%u",
++			host->ports[i]->print_id);
++
++		host->ports[i]->ledtrig->name = host->ports[i]->ledtrig_name;
++
++		if (led_trigger_register(host->ports[i]->ledtrig)) {
++			kfree(host->ports[i]->ledtrig);
++			host->ports[i]->ledtrig = NULL;
++		}
++	}
++#endif
+ 	/* Create associated sysfs transport objects  */
+ 	for (i = 0; i < host->n_ports; i++) {
+ 		rc = ata_tport_add(host->dev,host->ports[i]);
+--- a/include/linux/libata.h
++++ b/include/linux/libata.h
+@@ -38,6 +38,9 @@
+ #include <linux/acpi.h>
+ #include <linux/cdrom.h>
+ #include <linux/sched.h>
++#ifdef CONFIG_ATA_LEDS
++#include <linux/leds.h>
++#endif
+ 
+ /*
+  * Define if arch has non-standard setup.  This is a _PCI_ standard
+@@ -893,6 +896,12 @@ struct ata_port {
+ #ifdef CONFIG_ATA_ACPI
+ 	struct ata_acpi_gtm	__acpi_init_gtm; /* use ata_acpi_init_gtm() */
+ #endif
++
++#ifdef CONFIG_ATA_LEDS
++	struct led_trigger	*ledtrig;
++	char			ledtrig_name[8];
++#endif
++
+ 	/* owned by EH */
+ 	u8			sector_buf[ATA_SECT_SIZE] ____cacheline_aligned;
+ };
diff --git a/target/linux/generic/pending-5.4/920-mangle_bootargs.patch b/target/linux/generic/pending-5.4/920-mangle_bootargs.patch
new file mode 100644
index 0000000000..0750ab77c2
--- /dev/null
+++ b/target/linux/generic/pending-5.4/920-mangle_bootargs.patch
@@ -0,0 +1,71 @@
+From: Imre Kaloz <kaloz@openwrt.org>
+Subject: init: add CONFIG_MANGLE_BOOTARGS and disable it by default
+
+Enabling this option renames the bootloader supplied root=
+and rootfstype= variables, which might have to be know but
+would break the automatisms OpenWrt uses.
+
+Signed-off-by: Imre Kaloz <kaloz@openwrt.org>
+---
+ init/Kconfig |  9 +++++++++
+ init/main.c  | 24 ++++++++++++++++++++++++
+ 2 files changed, 33 insertions(+)
+
+--- a/init/Kconfig
++++ b/init/Kconfig
+@@ -1531,6 +1531,15 @@ config EMBEDDED
+ 	  an embedded system so certain expert options are available
+ 	  for configuration.
+ 
++config MANGLE_BOOTARGS
++	bool "Rename offending bootargs"
++	depends on EXPERT
++	help
++	  Sometimes the bootloader passed bogus root= and rootfstype=
++	  parameters to the kernel, and while you want to ignore them,
++	  you need to know the values f.e. to support dual firmware
++	  layouts on the flash.
++
+ config HAVE_PERF_EVENTS
+ 	bool
+ 	help
+--- a/init/main.c
++++ b/init/main.c
+@@ -365,6 +365,29 @@ static inline void setup_nr_cpu_ids(void
+ static inline void smp_prepare_cpus(unsigned int maxcpus) { }
+ #endif
+ 
++#ifdef CONFIG_MANGLE_BOOTARGS
++static void __init mangle_bootargs(char *command_line)
++{
++	char *rootdev;
++	char *rootfs;
++
++	rootdev = strstr(command_line, "root=/dev/mtdblock");
++
++	if (rootdev)
++		strncpy(rootdev, "mangled_rootblock=", 18);
++
++	rootfs = strstr(command_line, "rootfstype");
++
++	if (rootfs)
++		strncpy(rootfs, "mangled_fs", 10);
++
++}
++#else
++static void __init mangle_bootargs(char *command_line)
++{
++}
++#endif
++
+ /*
+  * We need to store the untouched command line for future reference.
+  * We also need to store the touched command line since the parameter
+@@ -557,6 +580,7 @@ asmlinkage __visible void __init start_k
+ 	add_device_randomness(command_line, strlen(command_line));
+ 	boot_init_stack_canary();
+ 	mm_init_cpumask(&init_mm);
++	mangle_bootargs(command_line);
+ 	setup_command_line(command_line);
+ 	setup_nr_cpu_ids();
+ 	setup_per_cpu_areas();
-- 
2.30.2