From c14cc531e5280d21a44a95b51719663248f835aa Mon Sep 17 00:00:00 2001 From: Lorenzo Santina Date: Wed, 27 Sep 2017 11:21:53 +0200 Subject: [PATCH] hostapd: update wpa_supplicant p2p config Update the config file to the latest version. Added CONFIG_EAP_FAST=y because it was the only missing flag about EAP compared to full config. Removed NEED_80211_COMMON flag because it is not part of config file, it is set by the hostapd upstream Makefile. Other flags are the same as before. Signed-off-by: Lorenzo Santina [add punctuation to commit msg] Signed-off-by: Stijn Tintel --- .../hostapd/files/wpa_supplicant-p2p.config | 369 +++++++++++++----- 1 file changed, 278 insertions(+), 91 deletions(-) diff --git a/package/network/services/hostapd/files/wpa_supplicant-p2p.config b/package/network/services/hostapd/files/wpa_supplicant-p2p.config index 563dace352..de6055137b 100644 --- a/package/network/services/hostapd/files/wpa_supplicant-p2p.config +++ b/package/network/services/hostapd/files/wpa_supplicant-p2p.config @@ -1,9 +1,9 @@ # Example wpa_supplicant build time configuration # # This file lists the configuration options that are used when building the -# hostapd binary. All lines starting with # are ignored. Configuration option -# lines must be commented out complete, if they are not to be included, i.e., -# just setting VARIABLE=n is not disabling that variable. +# wpa_supplicant binary. All lines starting with # are ignored. Configuration +# option lines must be commented out complete, if they are not to be included, +# i.e., just setting VARIABLE=n is not disabling that variable. # # This file is included in Makefile, so variables like CFLAGS and LIBS can also # be modified from here. In most cases, these lines should use += in order not @@ -20,63 +20,33 @@ # used to fix build issues on such systems (krb5.h not found). #CFLAGS += -I/usr/include/kerberos -# Example configuration for various cross-compilation platforms - -#### sveasoft (e.g., for Linksys WRT54G) ###################################### -#CC=mipsel-uclibc-gcc -#CC=/opt/brcm/hndtools-mipsel-uclibc/bin/mipsel-uclibc-gcc -#CFLAGS += -Os -#CPPFLAGS += -I../src/include -I../../src/router/openssl/include -#LIBS += -L/opt/brcm/hndtools-mipsel-uclibc-0.9.19/lib -lssl -############################################################################### - -#### openwrt (e.g., for Linksys WRT54G) ####################################### -#CC=mipsel-uclibc-gcc -#CC=/opt/brcm/hndtools-mipsel-uclibc/bin/mipsel-uclibc-gcc -#CFLAGS += -Os -#CPPFLAGS=-I../src/include -I../openssl-0.9.7d/include \ -# -I../WRT54GS/release/src/include -#LIBS = -lssl -############################################################################### - - -# Driver interface for Host AP driver -#CONFIG_DRIVER_HOSTAP=y - -# Driver interface for Agere driver -#CONFIG_DRIVER_HERMES=y -# Change include directories to match with the local setup -#CFLAGS += -I../../hcf -I../../include -I../../include/hcf -#CFLAGS += -I../../include/wireless - -# Driver interface for ndiswrapper -# Deprecated; use CONFIG_DRIVER_WEXT=y instead. -#CONFIG_DRIVER_NDISWRAPPER=y - -# Driver interface for Atmel driver -# CONFIG_DRIVER_ATMEL=y - -# Driver interface for old Broadcom driver -# Please note that the newer Broadcom driver ("hybrid Linux driver") supports -# Linux wireless extensions and does not need (or even work) with the old -# driver wrapper. Use CONFIG_DRIVER_WEXT=y with that driver. -#CONFIG_DRIVER_BROADCOM=y -# Example path for wlioctl.h; change to match your configuration -#CFLAGS += -I/opt/WRT54GS/release/src/include - -# Driver interface for Intel ipw2100/2200 driver -# Deprecated; use CONFIG_DRIVER_WEXT=y instead. -#CONFIG_DRIVER_IPW=y - -# Driver interface for Ralink driver -#CONFIG_DRIVER_RALINK=y - # Driver interface for generic Linux wireless extensions +# Note: WEXT is deprecated in the current Linux kernel version and no new +# functionality is added to it. nl80211-based interface is the new +# replacement for WEXT and its use allows wpa_supplicant to properly control +# the driver to improve existing functionality like roaming and to support new +# functionality. CONFIG_DRIVER_WEXT=y # Driver interface for Linux drivers using the nl80211 kernel interface CONFIG_DRIVER_NL80211=y +# QCA vendor extensions to nl80211 +#CONFIG_DRIVER_NL80211_QCA=y + +# driver_nl80211.c requires libnl. If you are compiling it yourself +# you may need to point hostapd to your version of libnl. +# +#CFLAGS += -I$ +#LIBS += -L$ + +# Use libnl v2.0 (or 3.0) libraries. +#CONFIG_LIBNL20=y + +# Use libnl 3.2 libraries (if this is selected, CONFIG_LIBNL20 is ignored) +#CONFIG_LIBNL32=y + + # Driver interface for FreeBSD net80211 layer (e.g., Atheros driver) #CONFIG_DRIVER_BSD=y #CFLAGS += -I/usr/local/include @@ -100,14 +70,6 @@ CONFIG_DRIVER_NL80211=y # wpa_supplicant. # CONFIG_USE_NDISUIO=y -# Driver interface for development testing -#CONFIG_DRIVER_TEST=y - -# Include client MLME (management frame processing) for test driver -# This can be used to test MLME operations in hostapd with the test interface. -# space. -#CONFIG_CLIENT_MLME=y - # Driver interface for wired Ethernet drivers CONFIG_DRIVER_WIRED=y @@ -117,6 +79,10 @@ CONFIG_DRIVER_WIRED=y # Driver interface for no driver (e.g., WPS ER only) #CONFIG_DRIVER_NONE=y +# Solaris libraries +#LIBS += -lsocket -ldlpi -lnsl +#LIBS_c += -lsocket + # Enable IEEE 802.1X Supplicant (automatically included if any EAP method is # included) CONFIG_IEEE8021X_EAPOL=y @@ -137,11 +103,10 @@ CONFIG_EAP_PEAP=y CONFIG_EAP_TTLS=y # EAP-FAST -# Note: Default OpenSSL package does not include support for all the -# functionality needed for EAP-FAST. If EAP-FAST is enabled with OpenSSL, -# the OpenSSL library must be patched (openssl-0.9.8d-tls-extensions.patch) -# to add the needed functions. -#CONFIG_EAP_FAST=y +# Note: If OpenSSL is used as the TLS library, OpenSSL 1.0 or newer is needed +# for EAP-FAST support. Older OpenSSL releases would need to be patched, e.g., +# with openssl-0.9.8x-tls-extensions.patch, to add the needed functions. +CONFIG_EAP_FAST=y # EAP-GTC CONFIG_EAP_GTC=y @@ -155,6 +120,9 @@ CONFIG_EAP_OTP=y # EAP-PSK (experimental; this is _not_ needed for WPA-PSK) #CONFIG_EAP_PSK=y +# EAP-pwd (secure authentication using only a password) +#CONFIG_EAP_PWD=y + # EAP-PAX #CONFIG_EAP_PAX=y @@ -184,10 +152,20 @@ CONFIG_EAP_LEAP=y # Wi-Fi Protected Setup (WPS) CONFIG_WPS=y +# Enable WPS external registrar functionality +#CONFIG_WPS_ER=y +# Disable credentials for an open network by default when acting as a WPS +# registrar. +#CONFIG_WPS_REG_DISABLE_OPEN=y +# Enable WPS support with NFC config method +#CONFIG_WPS_NFC=y # EAP-IKEv2 #CONFIG_EAP_IKEV2=y +# EAP-EKE +#CONFIG_EAP_EKE=y + # PKCS#12 (PFX) support (used to read private key and certificate file from # a file that usually has extension .p12 or .pfx) CONFIG_PKCS12=y @@ -200,13 +178,22 @@ CONFIG_SMARTCARD=y # Enable this if EAP-SIM or EAP-AKA is included #CONFIG_PCSC=y +# Support HT overrides (disable HT/HT40, mask MCS rates, etc.) +#CONFIG_HT_OVERRIDES=y + +# Support VHT overrides (disable VHT, mask MCS rates, etc.) +#CONFIG_VHT_OVERRIDES=y + # Development testing #CONFIG_EAPOL_TEST=y # Select control interface backend for external programs, e.g, wpa_cli: # unix = UNIX domain sockets (default for Linux/*BSD) # udp = UDP sockets using localhost (127.0.0.1) +# udp6 = UDP IPv6 sockets using localhost (::1) # named_pipe = Windows Named Pipe (default for Windows) +# udp-remote = UDP sockets with remote access (only for tests systems/purpose) +# udp6-remote = UDP IPv6 sockets with remote access (only for tests purpose) # y = use default (backwards compatibility) # If this option is commented out, control interface is not included in the # build. @@ -218,6 +205,10 @@ CONFIG_CTRL_IFACE=y # the resulting binary. #CONFIG_READLINE=y +# Include internal line edit mode in wpa_cli. This can be used as a replacement +# for GNU Readline to provide limited command line editing and history support. +#CONFIG_WPA_CLI_EDIT=y + # Remove debugging code that is printing out debug message to stdout. # This can be used to reduce the size of the wpa_supplicant considerably # if debugging code is not needed. The size reduction can be around 35% @@ -228,11 +219,6 @@ CONFIG_CTRL_IFACE=y # 35-50 kB in code size. #CONFIG_NO_WPA=y -# Remove WPA2 support. This allows WPA to be used, but removes WPA2 code to -# save about 1 kB in code size when building only WPA-Personal (no EAP support) -# or 6 kB if building for WPA-Enterprise. -#CONFIG_NO_WPA2=y - # Remove IEEE 802.11i/WPA-Personal ASCII passphrase support # This option can be used to reduce code size by removing support for # converting ASCII passphrases into PSK. If this functionality is removed, the @@ -267,7 +253,7 @@ CONFIG_BACKEND=file # main_none = Very basic example (development use only) #CONFIG_MAIN=main -# Select wrapper for operatins system and C library specific functions +# Select wrapper for operating system and C library specific functions # unix = UNIX/POSIX like systems (default) # win32 = Windows systems # none = Empty template @@ -276,9 +262,17 @@ CONFIG_BACKEND=file # Select event loop implementation # eloop = select() loop (default) # eloop_win = Windows events and WaitForMultipleObject() loop -# eloop_none = Empty template #CONFIG_ELOOP=eloop +# Should we use poll instead of select? Select is used by default. +#CONFIG_ELOOP_POLL=y + +# Should we use epoll instead of select? Select is used by default. +#CONFIG_ELOOP_EPOLL=y + +# Should we use kqueue instead of select? Select is used by default. +#CONFIG_ELOOP_KQUEUE=y + # Select layer 2 packet implementation # linux = Linux packet socket (default) # pcap = libpcap/libdnet/WinPcap @@ -288,29 +282,44 @@ CONFIG_BACKEND=file # none = Empty template #CONFIG_L2_PACKET=linux +# Disable Linux packet socket workaround applicable for station interface +# in a bridge for EAPOL frames. This should be uncommented only if the kernel +# is known to not have the regression issue in packet socket behavior with +# bridge interfaces (commit 'bridge: respect RFC2863 operational state')'). +#CONFIG_NO_LINUX_PACKET_SOCKET_WAR=y + # PeerKey handshake for Station to Station Link (IEEE 802.11e DLS) CONFIG_PEERKEY=y -# IEEE 802.11w (management frame protection) -# This version is an experimental implementation based on IEEE 802.11w/D1.0 -# draft and is subject to change since the standard has not yet been finalized. +# IEEE 802.11w (management frame protection), also known as PMF # Driver support is also needed for IEEE 802.11w. CONFIG_IEEE80211W=y # Select TLS implementation # openssl = OpenSSL (default) -# gnutls = GnuTLS (needed for TLS/IA, see also CONFIG_GNUTLS_EXTRA) +# gnutls = GnuTLS # internal = Internal TLSv1 implementation (experimental) +# linux = Linux kernel AF_ALG and internal TLSv1 implementation (experimental) # none = Empty template CONFIG_TLS=internal -# Whether to enable TLS/IA support, which is required for EAP-TTLSv1. -# You need CONFIG_TLS=gnutls for this to have any effect. Please note that -# even though the core GnuTLS library is released under LGPL, this extra -# library uses GPL and as such, the terms of GPL apply to the combination -# of wpa_supplicant and GnuTLS if this option is enabled. BSD license may not -# apply for distribution of the resulting binary. -#CONFIG_GNUTLS_EXTRA=y +# TLS-based EAP methods require at least TLS v1.0. Newer version of TLS (v1.1) +# can be enabled to get a stronger construction of messages when block ciphers +# are used. It should be noted that some existing TLS v1.0 -based +# implementation may not be compatible with TLS v1.1 message (ClientHello is +# sent prior to negotiating which version will be used) +#CONFIG_TLSV11=y + +# TLS-based EAP methods require at least TLS v1.0. Newer version of TLS (v1.2) +# can be enabled to enable use of stronger crypto algorithms. It should be +# noted that some existing TLS v1.0 -based implementation may not be compatible +# with TLS v1.2 message (ClientHello is sent prior to negotiating which version +# will be used) +#CONFIG_TLSV12=y + +# Select which ciphers to use by default with OpenSSL if the user does not +# specify them. +#CONFIG_TLS_DEFAULT_CIPHERS="DEFAULT:!EXP:!LOW" # If CONFIG_TLS=internal is used, additional library and include paths are # needed for LibTomMath. Alternatively, an integrated, minimal version of @@ -366,12 +375,31 @@ CONFIG_INTERNAL_LIBTOMMATH_FAST=y # amount of memory/flash. #CONFIG_DYNAMIC_EAP_METHODS=y -# IEEE Std 802.11r-2008 (Fast BSS Transition) +# IEEE Std 802.11r-2008 (Fast BSS Transition) for station mode #CONFIG_IEEE80211R=y +# IEEE Std 802.11r-2008 (Fast BSS Transition) for AP mode (implies +# CONFIG_IEEE80211R). +#CONFIG_IEEE80211R_AP=y + # Add support for writing debug log to a file (/tmp/wpa_supplicant-log-#.txt) #CONFIG_DEBUG_FILE=y +# Send debug messages to syslog instead of stdout +#CONFIG_DEBUG_SYSLOG=y +# Set syslog facility for debug messages +#CONFIG_DEBUG_SYSLOG_FACILITY=LOG_DAEMON + +# Add support for sending all debug messages (regardless of debug verbosity) +# to the Linux kernel tracing facility. This helps debug the entire stack by +# making it easy to record everything happening from the driver up into the +# same file, e.g., using trace-cmd. +#CONFIG_DEBUG_LINUX_TRACING=y + +# Add support for writing debug log to Android logcat instead of standard +# output +#CONFIG_ANDROID_LOG=y + # Enable privilege separation (see README 'Privilege separation' for details) #CONFIG_PRIVSEP=y @@ -383,7 +411,7 @@ CONFIG_INTERNAL_LIBTOMMATH_FAST=y # This tracks use of memory allocations and other registrations and reports # incorrect use with a backtrace of call (or allocation) location. #CONFIG_WPA_TRACE=y -# For BSD, comment out these. +# For BSD, uncomment these. #LIBS += -lexecinfo #LIBS_p += -lexecinfo #LIBS_c += -lexecinfo @@ -392,15 +420,174 @@ CONFIG_INTERNAL_LIBTOMMATH_FAST=y # This enables use of libbfd to get more detailed symbols for the backtraces # generated by CONFIG_WPA_TRACE=y. #CONFIG_WPA_TRACE_BFD=y -# For BSD, comment out these. +# For BSD, uncomment these. #LIBS += -lbfd -liberty -lz #LIBS_p += -lbfd -liberty -lz #LIBS_c += -lbfd -liberty -lz +# wpa_supplicant depends on strong random number generation being available +# from the operating system. os_get_random() function is used to fetch random +# data when needed, e.g., for key generation. On Linux and BSD systems, this +# works by reading /dev/urandom. It should be noted that the OS entropy pool +# needs to be properly initialized before wpa_supplicant is started. This is +# important especially on embedded devices that do not have a hardware random +# number generator and may by default start up with minimal entropy available +# for random number generation. +# +# As a safety net, wpa_supplicant is by default trying to internally collect +# additional entropy for generating random data to mix in with the data fetched +# from the OS. This by itself is not considered to be very strong, but it may +# help in cases where the system pool is not initialized properly. However, it +# is very strongly recommended that the system pool is initialized with enough +# entropy either by using hardware assisted random number generator or by +# storing state over device reboots. +# +# wpa_supplicant can be configured to maintain its own entropy store over +# restarts to enhance random number generation. This is not perfect, but it is +# much more secure than using the same sequence of random numbers after every +# reboot. This can be enabled with -e command line option. The +# specified file needs to be readable and writable by wpa_supplicant. +# +# If the os_get_random() is known to provide strong random data (e.g., on +# Linux/BSD, the board in question is known to have reliable source of random +# data from /dev/urandom), the internal wpa_supplicant random pool can be +# disabled. This will save some in binary size and CPU use. However, this +# should only be considered for builds that are known to be used on devices +# that meet the requirements described above. CONFIG_NO_RANDOM_POOL=y -NEED_80211_COMMON=y -CONFIG_IBSS_RSN=y +# IEEE 802.11n (High Throughput) support (mainly for AP mode) +#CONFIG_IEEE80211N=y -CONFIG_P2P=y +# IEEE 802.11ac (Very High Throughput) support (mainly for AP mode) +# (depends on CONFIG_IEEE80211N) +#CONFIG_IEEE80211AC=y + +# Wireless Network Management (IEEE Std 802.11v-2011) +# Note: This is experimental and not complete implementation. +#CONFIG_WNM=y + +# Interworking (IEEE 802.11u) +# This can be used to enable functionality to improve interworking with +# external networks (GAS/ANQP to learn more about the networks and network +# selection based on available credentials). +#CONFIG_INTERWORKING=y + +# Hotspot 2.0 +#CONFIG_HS20=y + +# Enable interface matching in wpa_supplicant +#CONFIG_MATCH_IFACE=y + +# Disable roaming in wpa_supplicant +#CONFIG_NO_ROAMING=y + +# AP mode operations with wpa_supplicant +# This can be used for controlling AP mode operations with wpa_supplicant. It +# should be noted that this is mainly aimed at simple cases like +# WPA2-Personal while more complex configurations like WPA2-Enterprise with an +# external RADIUS server can be supported with hostapd. CONFIG_AP=y + +# P2P (Wi-Fi Direct) +# This can be used to enable P2P support in wpa_supplicant. See README-P2P for +# more information on P2P operations. +CONFIG_P2P=y + +# Enable TDLS support +#CONFIG_TDLS=y + +# Wi-Fi Direct +# This can be used to enable Wi-Fi Direct extensions for P2P using an external +# program to control the additional information exchanges in the messages. +#CONFIG_WIFI_DISPLAY=y + +# Autoscan +# This can be used to enable automatic scan support in wpa_supplicant. +# See wpa_supplicant.conf for more information on autoscan usage. +# +# Enabling directly a module will enable autoscan support. +# For exponential module: +#CONFIG_AUTOSCAN_EXPONENTIAL=y +# For periodic module: +#CONFIG_AUTOSCAN_PERIODIC=y + +# Password (and passphrase, etc.) backend for external storage +# These optional mechanisms can be used to add support for storing passwords +# and other secrets in external (to wpa_supplicant) location. This allows, for +# example, operating system specific key storage to be used +# +# External password backend for testing purposes (developer use) +#CONFIG_EXT_PASSWORD_TEST=y + +# Enable Fast Session Transfer (FST) +#CONFIG_FST=y + +# Enable CLI commands for FST testing +#CONFIG_FST_TEST=y + +# OS X builds. This is only for building eapol_test. +#CONFIG_OSX=y + +# Automatic Channel Selection +# This will allow wpa_supplicant to pick the channel automatically when channel +# is set to "0". +# +# TODO: Extend parser to be able to parse "channel=acs_survey" as an alternative +# to "channel=0". This would enable us to eventually add other ACS algorithms in +# similar way. +# +# Automatic selection is currently only done through initialization, later on +# we hope to do background checks to keep us moving to more ideal channels as +# time goes by. ACS is currently only supported through the nl80211 driver and +# your driver must have survey dump capability that is filled by the driver +# during scanning. +# +# TODO: In analogy to hostapd be able to customize the ACS survey algorithm with +# a newly to create wpa_supplicant.conf variable acs_num_scans. +# +# Supported ACS drivers: +# * ath9k +# * ath5k +# * ath10k +# +# For more details refer to: +# http://wireless.kernel.org/en/users/Documentation/acs +#CONFIG_ACS=y + +# Support Multi Band Operation +#CONFIG_MBO=y + +# Fast Initial Link Setup (FILS) (IEEE 802.11ai) +# Note: This is an experimental and not yet complete implementation. This +# should not be enabled for production use. +#CONFIG_FILS=y +# FILS shared key authentication with PFS +#CONFIG_FILS_SK_PFS=y + +# Support RSN on IBSS networks +# This is needed to be able to use mode=1 network profile with proto=RSN and +# key_mgmt=WPA-PSK (i.e., full key management instead of WPA-None). +CONFIG_IBSS_RSN=y + +# External PMKSA cache control +# This can be used to enable control interface commands that allow the current +# PMKSA cache entries to be fetched and new entries to be added. +#CONFIG_PMKSA_CACHE_EXTERNAL=y + +# Mesh Networking (IEEE 802.11s) +#CONFIG_MESH=y + +# Background scanning modules +# These can be used to request wpa_supplicant to perform background scanning +# operations for roaming within an ESS (same SSID). See the bgscan parameter in +# the wpa_supplicant.conf file for more details. +# Periodic background scans based on signal strength +#CONFIG_BGSCAN_SIMPLE=y +# Learn channels used by the network and try to avoid bgscans on other +# channels (experimental) +#CONFIG_BGSCAN_LEARN=y + +# Opportunistic Wireless Encryption (OWE) +# Experimental implementation of draft-harkins-owe-07.txt +#CONFIG_OWE=y -- 2.30.2