From bf3a1eb85967dcbaae42f4fcb53c2392cec32677 Mon Sep 17 00:00:00 2001 From: Florian Fainelli Date: Sun, 27 Feb 2011 19:53:53 +0100 Subject: [PATCH] MIPS: MTX-1: Make au1000_eth probe all PHY addresses When au1000_eth probes the MII bus for PHY address, if we do not set au1000_eth platform data's phy_search_highest_address, the MII probing logic will exit early and will assume a valid PHY is found at address 0. For MTX-1, the PHY is at address 31, and without this patch, the link detection/speed/duplex would not work correctly. CC: stable@kernel.org Signed-off-by: Florian Fainelli To: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/2111/ Signed-off-by: Ralf Baechle --- arch/mips/alchemy/mtx-1/platform.c | 9 +++++++++ 1 file changed, 9 insertions(+) diff --git a/arch/mips/alchemy/mtx-1/platform.c b/arch/mips/alchemy/mtx-1/platform.c index e30e42add697..956f946218c5 100644 --- a/arch/mips/alchemy/mtx-1/platform.c +++ b/arch/mips/alchemy/mtx-1/platform.c @@ -28,6 +28,8 @@ #include #include +#include + static struct gpio_keys_button mtx1_gpio_button[] = { { .gpio = 207, @@ -140,10 +142,17 @@ static struct __initdata platform_device * mtx1_devs[] = { &mtx1_mtd, }; +static struct au1000_eth_platform_data mtx1_au1000_eth0_pdata = { + .phy_search_highest_addr = 1, + .phy1_search_mac0 = 1, +}; + static int __init mtx1_register_devices(void) { int rc; + au1xxx_override_eth_cfg(0, &mtx1_au1000_eth0_pdata); + rc = gpio_request(mtx1_gpio_button[0].gpio, mtx1_gpio_button[0].desc); if (rc < 0) { -- 2.30.2