From bec9e79a99adee64dcc9559e6f008a2ffd5b3f4e Mon Sep 17 00:00:00 2001 From: Lorenz Brun Date: Wed, 28 Dec 2022 20:54:21 +0100 Subject: [PATCH] realtek: dsa: support active-high LEDs The TP-LINK TL-ST1008F has active-high LEDs, so we need a device tree property to express this. Signed-off-by: Lorenz Brun [Tidy up code, restrict changes to 5.15] Signed-off-by: Sander Vanheule --- .../linux/realtek/dts-5.15/rtl9302_zyxel_xgs1250-12.dts | 2 ++ .../realtek/files-5.15/drivers/net/dsa/rtl83xx/rtl930x.c | 8 ++++++++ 2 files changed, 10 insertions(+) diff --git a/target/linux/realtek/dts-5.15/rtl9302_zyxel_xgs1250-12.dts b/target/linux/realtek/dts-5.15/rtl9302_zyxel_xgs1250-12.dts index a57fc00c6e..a9821b2cc6 100644 --- a/target/linux/realtek/dts-5.15/rtl9302_zyxel_xgs1250-12.dts +++ b/target/linux/realtek/dts-5.15/rtl9302_zyxel_xgs1250-12.dts @@ -64,6 +64,8 @@ led_set: led_set@0 { compatible = "realtek,rtl9300-leds"; + active-low; + led_set0 = <0x0000 0xffff 0x0a20 0x0b80>; // LED set 0: 1000Mbps, 10/100Mbps led_set1 = <0x0a0b 0x0a28 0x0a82 0x0a0b>; // LED set 1: (10G, 5G, 2.5G) (2.5G, 1G) // (5G, 10/100) (10G, 5G, 2.5G) diff --git a/target/linux/realtek/files-5.15/drivers/net/dsa/rtl83xx/rtl930x.c b/target/linux/realtek/files-5.15/drivers/net/dsa/rtl83xx/rtl930x.c index 7e4f13fbad..5a899f32ba 100644 --- a/target/linux/realtek/files-5.15/drivers/net/dsa/rtl83xx/rtl930x.c +++ b/target/linux/realtek/files-5.15/drivers/net/dsa/rtl83xx/rtl930x.c @@ -21,6 +21,8 @@ #define RTL930X_VLAN_PORT_TAG_STS_CTRL_IGR_P_OTAG_KEEP_MASK GENMASK(1,1) #define RTL930X_VLAN_PORT_TAG_STS_CTRL_IGR_P_ITAG_KEEP_MASK GENMASK(0,0) +#define RTL930X_LED_GLB_ACTIVE_LOW BIT(22) + extern struct mutex smi_lock; extern struct rtl83xx_soc_info soc_info; @@ -2431,6 +2433,12 @@ static void rtl930x_led_init(struct rtl838x_switch_priv *priv) /* Set LED mode to serial (0x1) */ sw_w32_mask(0x3, 0x1, RTL930X_LED_GLB_CTRL); + /* Set LED active state */ + if (of_property_read_bool(node, "active-low")) + sw_w32_mask(RTL930X_LED_GLB_ACTIVE_LOW, 0, RTL930X_LED_GLB_CTRL); + else + sw_w32_mask(0, RTL930X_LED_GLB_ACTIVE_LOW, RTL930X_LED_GLB_CTRL); + /* Set port type masks */ sw_w32(pm, RTL930X_LED_PORT_COPR_MASK_CTRL); sw_w32(pm, RTL930X_LED_PORT_FIB_MASK_CTRL); -- 2.30.2