From bda3153998f3eb2cafa4a6311971143628eacdbc Mon Sep 17 00:00:00 2001 From: BingJing Chang Date: Thu, 28 Jun 2018 18:40:11 +0800 Subject: [PATCH] md/raid10: fix that replacement cannot complete recovery after reassemble During assemble, the spare marked for replacement is not checked. conf->fullsync cannot be updated to be 1. As a result, recovery will treat it as a clean array. All recovering sectors are skipped. Original device is replaced with the not-recovered spare. mdadm -C /dev/md0 -l10 -n4 -pn2 /dev/loop[0123] mdadm /dev/md0 -a /dev/loop4 mdadm /dev/md0 --replace /dev/loop0 mdadm -S /dev/md0 # stop array during recovery mdadm -A /dev/md0 /dev/loop[01234] After reassemble, you can see recovery go on, but it completes immediately. In fact, recovery is not actually processed. To solve this problem, we just add the missing logics for replacment spares. (In raid1.c or raid5.c, they have already been checked.) Reported-by: Alex Chen Reviewed-by: Alex Wu Reviewed-by: Chung-Chiang Cheng Signed-off-by: BingJing Chang Signed-off-by: Shaohua Li --- drivers/md/raid10.c | 7 +++++++ 1 file changed, 7 insertions(+) diff --git a/drivers/md/raid10.c b/drivers/md/raid10.c index 478cf446827f..35bd3a62451b 100644 --- a/drivers/md/raid10.c +++ b/drivers/md/raid10.c @@ -3893,6 +3893,13 @@ static int raid10_run(struct mddev *mddev) disk->rdev->saved_raid_disk < 0) conf->fullsync = 1; } + + if (disk->replacement && + !test_bit(In_sync, &disk->replacement->flags) && + disk->replacement->saved_raid_disk < 0) { + conf->fullsync = 1; + } + disk->recovery_disabled = mddev->recovery_disabled - 1; } -- 2.30.2