From bd6857a0c630207484a03ddc470fab34b23f80bb Mon Sep 17 00:00:00 2001 From: Geert Uytterhoeven Date: Tue, 21 Jan 2014 16:10:07 +0100 Subject: [PATCH] spi: Correct set_cs() documentation The documentation for spi_master.set_cs() says: assert or deassert chip select, true to assert i.e. its "enable" parameter uses assertion-level logic. This does not match the implementation of spi_set_cs(), which calls spi_master.set_cs() with the wanted logic level of the chip select line, which depends on the polarity of the chip select signal. Correct the documentation to match the implementation. Signed-off-by: Geert Uytterhoeven Signed-off-by: Mark Brown --- include/linux/spi/spi.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/include/linux/spi/spi.h b/include/linux/spi/spi.h index e766e0e2fe58..9f5242df9311 100644 --- a/include/linux/spi/spi.h +++ b/include/linux/spi/spi.h @@ -277,7 +277,7 @@ static inline void spi_unregister_driver(struct spi_driver *sdrv) * @unprepare_transfer_hardware: there are currently no more messages on the * queue so the subsystem notifies the driver that it may relax the * hardware by issuing this call - * @set_cs: assert or deassert chip select, true to assert. May be called + * @set_cs: set the logic level of the chip select line. May be called * from interrupt context. * @prepare_message: set up the controller to transfer a single message, * for example doing DMA mapping. Called from threaded -- 2.30.2