From bcaafbe4a14e3c9b5275b3986c7599f7c6c278e4 Mon Sep 17 00:00:00 2001 From: Stefan Sorensen Date: Wed, 6 Jul 2005 23:06:04 +0100 Subject: [PATCH] [PATCH] ARM: 2790/1: Properly terminate plat_serial8250_port arrays on ixdp425 and coyote Patch from Stefan Sorensen On the ixdp425 and coyote platforms, the plat_serial8250_port arrays are missing the terminating entry required by serial8250_probe. Signed-off-by: Stefan Sorensen Signed-off-by: Russell King --- arch/arm/mach-ixp4xx/coyote-setup.c | 27 +++++++++++++++------------ arch/arm/mach-ixp4xx/ixdp425-setup.c | 3 ++- 2 files changed, 17 insertions(+), 13 deletions(-) diff --git a/arch/arm/mach-ixp4xx/coyote-setup.c b/arch/arm/mach-ixp4xx/coyote-setup.c index c6335f51907d..4ff4393ef0ea 100644 --- a/arch/arm/mach-ixp4xx/coyote-setup.c +++ b/arch/arm/mach-ixp4xx/coyote-setup.c @@ -56,21 +56,24 @@ static struct resource coyote_uart_resource = { .flags = IORESOURCE_MEM, }; -static struct plat_serial8250_port coyote_uart_data = { - .mapbase = IXP4XX_UART2_BASE_PHYS, - .membase = (char *)IXP4XX_UART2_BASE_VIRT + REG_OFFSET, - .irq = IRQ_IXP4XX_UART2, - .flags = UPF_BOOT_AUTOCONF, - .iotype = UPIO_MEM, - .regshift = 2, - .uartclk = IXP4XX_UART_XTAL, +static struct plat_serial8250_port coyote_uart_data[] = { + { + .mapbase = IXP4XX_UART2_BASE_PHYS, + .membase = (char *)IXP4XX_UART2_BASE_VIRT + REG_OFFSET, + .irq = IRQ_IXP4XX_UART2, + .flags = UPF_BOOT_AUTOCONF, + .iotype = UPIO_MEM, + .regshift = 2, + .uartclk = IXP4XX_UART_XTAL, + }, + { }, }; static struct platform_device coyote_uart = { .name = "serial8250", .id = 0, .dev = { - .platform_data = &coyote_uart_data, + .platform_data = coyote_uart_data, }, .num_resources = 1, .resource = &coyote_uart_resource, @@ -87,10 +90,10 @@ static void __init coyote_init(void) *IXP4XX_EXP_CS1 = *IXP4XX_EXP_CS0; if (machine_is_ixdpg425()) { - coyote_uart_data.membase = + coyote_uart_data[0].membase = (char*)(IXP4XX_UART1_BASE_VIRT + REG_OFFSET); - coyote_uart_data.mapbase = IXP4XX_UART1_BASE_PHYS; - coyote_uart_data.irq = IRQ_IXP4XX_UART1; + coyote_uart_data[0].mapbase = IXP4XX_UART1_BASE_PHYS; + coyote_uart_data[0].irq = IRQ_IXP4XX_UART1; } diff --git a/arch/arm/mach-ixp4xx/ixdp425-setup.c b/arch/arm/mach-ixp4xx/ixdp425-setup.c index f2e9c0ea0501..c2ba759e9946 100644 --- a/arch/arm/mach-ixp4xx/ixdp425-setup.c +++ b/arch/arm/mach-ixp4xx/ixdp425-setup.c @@ -95,7 +95,8 @@ static struct plat_serial8250_port ixdp425_uart_data[] = { .iotype = UPIO_MEM, .regshift = 2, .uartclk = IXP4XX_UART_XTAL, - } + }, + { }, }; static struct platform_device ixdp425_uart = { -- 2.30.2