From bbcd5111cb8b24ae735085a9530afb9551f34d96 Mon Sep 17 00:00:00 2001 From: FUKAUMI Naoki Date: Mon, 22 Jul 2024 08:01:56 +0900 Subject: [PATCH] rockchip: add support for Radxa ROCK Pi S Radxa ROCK Pi S is a small in size, full in features SBC[1] using the Rockchip RK3308B SoC. Hardware -------- - Rockchip RK3308B SoC - Quad A35 CPU - 256/512MB DDR3 RAM - Optional 4/8GB eMMC - Micro SD Card slot - Optional WiFi 4 and BT 4 (not supported yet) - 1x 100M Ethernet with PoE support (additional PoE HAT required) - 1x USB 2.0 Type-A port (Host) - 1x USB 2.0 Type-C port (OTG) - 2x 26 Pin GPIO header [1] https://radxa.com/products/rockpi/pis Installation ------------ Uncompress the OpenWrt sysupgrade and write it to a micro SD card or internal eMMC using dd. Signed-off-by: FUKAUMI Naoki Link: https://github.com/openwrt/openwrt/pull/15933 Signed-off-by: Hauke Mehrtens --- package/boot/rkbin/Makefile | 31 ++++ package/boot/uboot-rockchip/Makefile | 19 +++ target/linux/rockchip/image/armv8.mk | 11 ++ .../linux/rockchip/image/rock-pi-s.bootscript | 7 + ...ip-add-gpio-line-names-to-rk3308-roc.patch | 84 ++++++++++ ...ip-rk3308-rock-pi-s-gpio-line-names-.patch | 152 ++++++++++++++++++ ...ip-Add-sdmmc-related-properties-on-r.patch | 32 ++++ ...ip-Add-pinctrl-for-UART0-to-rk3308-r.patch | 31 ++++ ...ip-Add-mdio-and-ethernet-phy-nodes-t.patch | 61 +++++++ ...s-add-led-aliases-and-stop-heartbeat.patch | 38 +++++ 10 files changed, 466 insertions(+) create mode 100644 target/linux/rockchip/image/rock-pi-s.bootscript create mode 100644 target/linux/rockchip/patches-6.6/040-v6.8-arm64-dts-rockchip-add-gpio-line-names-to-rk3308-roc.patch create mode 100644 target/linux/rockchip/patches-6.6/041-v6.8-arm64-dts-rockchip-rk3308-rock-pi-s-gpio-line-names-.patch create mode 100644 target/linux/rockchip/patches-6.6/044-v6.11-arm64-dts-rockchip-Add-sdmmc-related-properties-on-r.patch create mode 100644 target/linux/rockchip/patches-6.6/045-v6.11-arm64-dts-rockchip-Add-pinctrl-for-UART0-to-rk3308-r.patch create mode 100644 target/linux/rockchip/patches-6.6/046-v6.11-arm64-dts-rockchip-Add-mdio-and-ethernet-phy-nodes-t.patch create mode 100644 target/linux/rockchip/patches-6.6/113-rock-pi-s-add-led-aliases-and-stop-heartbeat.patch diff --git a/package/boot/rkbin/Makefile b/package/boot/rkbin/Makefile index 86d2dd0684..58098b8ea7 100644 --- a/package/boot/rkbin/Makefile +++ b/package/boot/rkbin/Makefile @@ -25,6 +25,19 @@ define Trusted-Firmware-A/Default BUILD_TARGET:=rockchip endef +define Trusted-Firmware-A/rk3308 + BUILD_SUBTARGET:=armv8 + ATF:=rk33/rk3308_bl31_v2.26.elf + TPL:=rk33/rk3308_ddr_589MHz_uart2_m1_v2.07.bin +endef + +define Trusted-Firmware-A/rk3308-rock-pi-s + NAME:=Radxa ROCK Pi S + BUILD_SUBTARGET:=armv8 + ATF:=rk33/rk3308_bl31_v2.26.elf + TPL:=rk33/rk3308_ddr_589MHz_uart0_m0_v2.07.bin +endef + define Trusted-Firmware-A/rk3566 BUILD_SUBTARGET:=armv8 ATF:=rk35/rk3568_bl31_v1.44.elf @@ -45,10 +58,28 @@ define Trusted-Firmware-A/rk3568-e25 endef TFA_TARGETS:= \ + rk3308 \ + rk3308-rock-pi-s \ rk3566 \ rk3568 \ rk3568-e25 +ifeq ($(BUILD_VARIANT),rk3308-rock-pi-s) + TPL_FILE:=rk3308_ddr_589MHz_uart0_m0_v2.07.bin + define Download/rk3308-tpl-rock-pi-s + FILE:=$(TPL_FILE) + URL:=https://github.com/radxa/rkbin/raw/5696fab20dcac57c1458f72dc7604ba60e553adf/bin/rk33/ + HASH:=8a1a42df23cccb86a2dabc14a5c0e9227d64a51b9b83e9968ef5af3b30787f7d + endef + + define Build/Prepare + $(eval $(call Download,rk3308-tpl-rock-pi-s)) + $(call Build/Prepare/Default) + + $(CP) $(DL_DIR)/$(TPL_FILE) $(PKG_BUILD_DIR)/bin/rk33/ + endef +endif + ifeq ($(BUILD_VARIANT),rk3568-e25) TPL_FILE:=rk3568_ddr_1560MHz_uart2_m0_115200_v1.21.bin define Download/rk3568-tpl-e25 diff --git a/package/boot/uboot-rockchip/Makefile b/package/boot/uboot-rockchip/Makefile index 734f0304ee..0d31b0be6f 100644 --- a/package/boot/uboot-rockchip/Makefile +++ b/package/boot/uboot-rockchip/Makefile @@ -24,6 +24,24 @@ define U-Boot/Default endef +# RK3308 boards + +define U-Boot/rk3308/Default + BUILD_SUBTARGET:=armv8 + DEPENDS:=+PACKAGE_u-boot-$(1):trusted-firmware-a-rk3308 + ATF:=rk3308_bl31_v2.26.elf + TPL:=rk3308_ddr_589MHz_uart2_m1_v2.07.bin +endef + +define U-Boot/rock-pi-s-rk3308 + $(U-Boot/rk3308/Default) + DEPENDS:=+PACKAGE_u-boot-$(1):trusted-firmware-a-rk3308-rock-pi-s + TPL:=rk3308_ddr_589MHz_uart0_m0_v2.07.bin + NAME:=ROCK Pi S + BUILD_DEVICES:= \ + radxa_rock-pi-s +endef + # RK3328 boards define U-Boot/rk3328/Default @@ -186,6 +204,7 @@ UBOOT_TARGETS := \ nanopi-r4s-rk3399 \ rock-pi-4-rk3399 \ rockpro64-rk3399 \ + rock-pi-s-rk3308 \ nanopi-r2c-rk3328 \ nanopi-r2c-plus-rk3328 \ nanopi-r2s-rk3328 \ diff --git a/target/linux/rockchip/image/armv8.mk b/target/linux/rockchip/image/armv8.mk index 2405c07d9c..4cb9ceb40c 100644 --- a/target/linux/rockchip/image/armv8.mk +++ b/target/linux/rockchip/image/armv8.mk @@ -131,6 +131,17 @@ define Device/radxa_rock-pi-e endef TARGET_DEVICES += radxa_rock-pi-e +define Device/radxa_rock-pi-s + DEVICE_VENDOR := Radxa + DEVICE_MODEL := ROCK Pi S + SOC := rk3308 + DEVICE_DTS := rockchip/rk3308-rock-pi-s + BOOT_SCRIPT := rock-pi-s + UBOOT_DEVICE_NAME := rock-pi-s-rk3308 + DEVICE_PACKAGES := kmod-usb-net-cdc-ncm kmod-usb-net-rndis +endef +TARGET_DEVICES += radxa_rock-pi-s + define Device/sinovoip_bpi-r2-pro DEVICE_VENDOR := Sinovoip DEVICE_MODEL := Bananapi-R2 Pro diff --git a/target/linux/rockchip/image/rock-pi-s.bootscript b/target/linux/rockchip/image/rock-pi-s.bootscript new file mode 100644 index 0000000000..c968e53d81 --- /dev/null +++ b/target/linux/rockchip/image/rock-pi-s.bootscript @@ -0,0 +1,7 @@ +part uuid ${devtype} ${devnum}:2 uuid + +setenv bootargs "console=ttyS0,1500000 earlycon=uart8250,mmio32,0xff0a0000 root=PARTUUID=${uuid} rw rootwait"; + +load ${devtype} ${devnum}:1 ${kernel_addr_r} kernel.img + +bootm ${kernel_addr_r} diff --git a/target/linux/rockchip/patches-6.6/040-v6.8-arm64-dts-rockchip-add-gpio-line-names-to-rk3308-roc.patch b/target/linux/rockchip/patches-6.6/040-v6.8-arm64-dts-rockchip-add-gpio-line-names-to-rk3308-roc.patch new file mode 100644 index 0000000000..28e3b276ba --- /dev/null +++ b/target/linux/rockchip/patches-6.6/040-v6.8-arm64-dts-rockchip-add-gpio-line-names-to-rk3308-roc.patch @@ -0,0 +1,84 @@ +From c45de75d7a9ab44a15dedc7a121d6371d6891301 Mon Sep 17 00:00:00 2001 +From: Trevor Woerner +Date: Mon, 20 Nov 2023 11:22:32 -0500 +Subject: [PATCH] arm64: dts: rockchip: add gpio-line-names to rk3308-rock-pi-s + +Add names to the pins of the general-purpose expansion header as given in the +Radxa GPIO page[1] following the conventions in the kernel documentation[2] to +make it easier for users to correlate the pins with functions when using +utilities such as gpioinfo. + +[1] https://wiki.radxa.com/RockpiS/hardware/gpio +[2] Documentation/devicetree/bindings/gpio/gpio.txt + +Signed-off-by: Trevor Woerner +Link: https://lore.kernel.org/r/20231120162232.27653-1-twoerner@gmail.com +Signed-off-by: Heiko Stuebner +--- + .../boot/dts/rockchip/rk3308-rock-pi-s.dts | 58 +++++++++++++++++++ + 1 file changed, 58 insertions(+) + +--- a/arch/arm64/boot/dts/rockchip/rk3308-rock-pi-s.dts ++++ b/arch/arm64/boot/dts/rockchip/rk3308-rock-pi-s.dts +@@ -258,3 +258,61 @@ + &wdt { + status = "okay"; + }; ++ ++&gpio0 { ++ gpio-line-names = ++ /* GPIO0_A0 - A7 */ ++ "", "", "", "", "", "", "", "", ++ /* GPIO0_B0 - B7 */ ++ "", "", "", "header1-pin3 [GPIO0_B3]", "header1-pin5 [GPIO0_B4]", ++ "", "", "header1-pin11 [GPIO0_B7]", ++ /* GPIO0_C0 - C7 */ ++ "header1-pin13 [GPIO0_C0]", "header1-pin15 [GPIO0_C1]", "", "", "", ++ "", "", "", ++ /* GPIO0_D0 - D8 */ ++ "", "", "", "", "", "", "", ""; ++}; ++ ++&gpio1 { ++ gpio-line-names = ++ /* GPIO1_A0 - A7 */ ++ "", "", "", "", "", "", "", "", ++ /* GPIO1_B0 - B7 */ ++ "", "", "", "", "", "", "", "", ++ /* GPIO1_C0 - C7 */ ++ "", "", "", "", "", "", "header1-pin21 [GPIO1_C6]", ++ "header1-pin19 [GPIO1_C7]", ++ /* GPIO1_D0 - D8 */ ++ "header1-pin23 [GPIO1_D0]", "header1-pin24 [GPIO1_D1]", "", "", "", ++ "", "", ""; ++}; ++ ++&gpio2 { ++ gpio-line-names = ++ /* GPIO2_A0 - A7 */ ++ "header1-pin10 [GPIO2_A0]", "header1-pin8 [GPIO2_A1]", "", "", ++ "header1-pin7 [GPIO2_A4]", "header1-pin12 [GPIO2_A5]", ++ "header2-pin46 [GPIO2_A6]", "header1-pin22 [GPIO1_A7]", ++ /* GPIO2_B0 - B7 */ ++ "header2-pin45 [GPIO2_B0]", "header1-pin18 [GPIO2_B1]", ++ "header1-pin16 [GPIO2_B2]", "header2-pin44 [GPIO2_B3]", ++ "header2-pin43 [GPIO2_B4]", "header2-pin28 [GPIO2_B5]", ++ "header2-pin30 [GPIO2_B6]", "header2-pin32 [GPIO2_B7]", ++ /* GPIO2_C0 - C7 */ ++ "header2-pin34 [GPIO2_C0]", "", "", "", "", "", "", "", ++ /* GPIO2_D0 - D8 */ ++ "", "", "", "", "", "", "", ""; ++}; ++ ++&gpio3 { ++ gpio-line-names = ++ /* GPIO3_A0 - A7 */ ++ "", "", "", "", "", "", "", "", ++ /* GPIO3_B0 - B7 */ ++ "", "", "header2-pin42 [GPIO3_B2]", "header2-pin41 [GPIO3_B3]", ++ "header2-pin40 [GPIO3_B4]", "header2-pin39 [GPIO3_B5]", "", "", ++ /* GPIO3_C0 - C7 */ ++ "", "", "", "", "", "", "", "", ++ /* GPIO3_D0 - D8 */ ++ "", "", "", "", "", "", "", ""; ++}; diff --git a/target/linux/rockchip/patches-6.6/041-v6.8-arm64-dts-rockchip-rk3308-rock-pi-s-gpio-line-names-.patch b/target/linux/rockchip/patches-6.6/041-v6.8-arm64-dts-rockchip-rk3308-rock-pi-s-gpio-line-names-.patch new file mode 100644 index 0000000000..3d006c00fe --- /dev/null +++ b/target/linux/rockchip/patches-6.6/041-v6.8-arm64-dts-rockchip-rk3308-rock-pi-s-gpio-line-names-.patch @@ -0,0 +1,152 @@ +From 085021cc825ed90a6ddc4406f608fb8a85745f81 Mon Sep 17 00:00:00 2001 +From: Trevor Woerner +Date: Tue, 19 Dec 2023 12:38:13 -0500 +Subject: [PATCH] arm64: dts: rockchip: rk3308-rock-pi-s gpio-line-names + cleanup + +Perform the following cleanups on a previous patch: +- indent lines after "gpio-line-names" +- fix D0-D8 -> D0-D7 +- sort phandle references + +Fixes: c45de75d7a9a ("arm64: dts: rockchip: add gpio-line-names to rk3308-rock-pi-s") +Signed-off-by: Trevor Woerner +Link: https://lore.kernel.org/r/20231219173814.1569-1-twoerner@gmail.com +Signed-off-by: Heiko Stuebner +--- + .../boot/dts/rockchip/rk3308-rock-pi-s.dts | 120 +++++++++--------- + 1 file changed, 62 insertions(+), 58 deletions(-) + +--- a/arch/arm64/boot/dts/rockchip/rk3308-rock-pi-s.dts ++++ b/arch/arm64/boot/dts/rockchip/rk3308-rock-pi-s.dts +@@ -151,6 +151,68 @@ + status = "okay"; + }; + ++&gpio0 { ++ gpio-line-names = ++ /* GPIO0_A0 - A7 */ ++ "", "", "", "", "", "", "", "", ++ /* GPIO0_B0 - B7 */ ++ "", "", "", "header1-pin3 [GPIO0_B3]", ++ "header1-pin5 [GPIO0_B4]", "", "", ++ "header1-pin11 [GPIO0_B7]", ++ /* GPIO0_C0 - C7 */ ++ "header1-pin13 [GPIO0_C0]", ++ "header1-pin15 [GPIO0_C1]", "", "", "", ++ "", "", "", ++ /* GPIO0_D0 - D7 */ ++ "", "", "", "", "", "", "", ""; ++}; ++ ++&gpio1 { ++ gpio-line-names = ++ /* GPIO1_A0 - A7 */ ++ "", "", "", "", "", "", "", "", ++ /* GPIO1_B0 - B7 */ ++ "", "", "", "", "", "", "", "", ++ /* GPIO1_C0 - C7 */ ++ "", "", "", "", "", "", "header1-pin21 [GPIO1_C6]", ++ "header1-pin19 [GPIO1_C7]", ++ /* GPIO1_D0 - D7 */ ++ "header1-pin23 [GPIO1_D0]", "header1-pin24 [GPIO1_D1]", ++ "", "", "", "", "", ""; ++}; ++ ++&gpio2 { ++ gpio-line-names = ++ /* GPIO2_A0 - A7 */ ++ "header1-pin10 [GPIO2_A0]", "header1-pin8 [GPIO2_A1]", ++ "", "", ++ "header1-pin7 [GPIO2_A4]", "header1-pin12 [GPIO2_A5]", ++ "header2-pin46 [GPIO2_A6]", "header1-pin22 [GPIO1_A7]", ++ /* GPIO2_B0 - B7 */ ++ "header2-pin45 [GPIO2_B0]", "header1-pin18 [GPIO2_B1]", ++ "header1-pin16 [GPIO2_B2]", "header2-pin44 [GPIO2_B3]", ++ "header2-pin43 [GPIO2_B4]", "header2-pin28 [GPIO2_B5]", ++ "header2-pin30 [GPIO2_B6]", "header2-pin32 [GPIO2_B7]", ++ /* GPIO2_C0 - C7 */ ++ "header2-pin34 [GPIO2_C0]", "", "", "", "", "", "", "", ++ /* GPIO2_D0 - D7 */ ++ "", "", "", "", "", "", "", ""; ++}; ++ ++&gpio3 { ++ gpio-line-names = ++ /* GPIO3_A0 - A7 */ ++ "", "", "", "", "", "", "", "", ++ /* GPIO3_B0 - B7 */ ++ "", "", "header2-pin42 [GPIO3_B2]", ++ "header2-pin41 [GPIO3_B3]", "header2-pin40 [GPIO3_B4]", ++ "header2-pin39 [GPIO3_B5]", "", "", ++ /* GPIO3_C0 - C7 */ ++ "", "", "", "", "", "", "", "", ++ /* GPIO3_D0 - D7 */ ++ "", "", "", "", "", "", "", ""; ++}; ++ + &i2c1 { + status = "okay"; + }; +@@ -258,61 +320,3 @@ + &wdt { + status = "okay"; + }; +- +-&gpio0 { +- gpio-line-names = +- /* GPIO0_A0 - A7 */ +- "", "", "", "", "", "", "", "", +- /* GPIO0_B0 - B7 */ +- "", "", "", "header1-pin3 [GPIO0_B3]", "header1-pin5 [GPIO0_B4]", +- "", "", "header1-pin11 [GPIO0_B7]", +- /* GPIO0_C0 - C7 */ +- "header1-pin13 [GPIO0_C0]", "header1-pin15 [GPIO0_C1]", "", "", "", +- "", "", "", +- /* GPIO0_D0 - D8 */ +- "", "", "", "", "", "", "", ""; +-}; +- +-&gpio1 { +- gpio-line-names = +- /* GPIO1_A0 - A7 */ +- "", "", "", "", "", "", "", "", +- /* GPIO1_B0 - B7 */ +- "", "", "", "", "", "", "", "", +- /* GPIO1_C0 - C7 */ +- "", "", "", "", "", "", "header1-pin21 [GPIO1_C6]", +- "header1-pin19 [GPIO1_C7]", +- /* GPIO1_D0 - D8 */ +- "header1-pin23 [GPIO1_D0]", "header1-pin24 [GPIO1_D1]", "", "", "", +- "", "", ""; +-}; +- +-&gpio2 { +- gpio-line-names = +- /* GPIO2_A0 - A7 */ +- "header1-pin10 [GPIO2_A0]", "header1-pin8 [GPIO2_A1]", "", "", +- "header1-pin7 [GPIO2_A4]", "header1-pin12 [GPIO2_A5]", +- "header2-pin46 [GPIO2_A6]", "header1-pin22 [GPIO1_A7]", +- /* GPIO2_B0 - B7 */ +- "header2-pin45 [GPIO2_B0]", "header1-pin18 [GPIO2_B1]", +- "header1-pin16 [GPIO2_B2]", "header2-pin44 [GPIO2_B3]", +- "header2-pin43 [GPIO2_B4]", "header2-pin28 [GPIO2_B5]", +- "header2-pin30 [GPIO2_B6]", "header2-pin32 [GPIO2_B7]", +- /* GPIO2_C0 - C7 */ +- "header2-pin34 [GPIO2_C0]", "", "", "", "", "", "", "", +- /* GPIO2_D0 - D8 */ +- "", "", "", "", "", "", "", ""; +-}; +- +-&gpio3 { +- gpio-line-names = +- /* GPIO3_A0 - A7 */ +- "", "", "", "", "", "", "", "", +- /* GPIO3_B0 - B7 */ +- "", "", "header2-pin42 [GPIO3_B2]", "header2-pin41 [GPIO3_B3]", +- "header2-pin40 [GPIO3_B4]", "header2-pin39 [GPIO3_B5]", "", "", +- /* GPIO3_C0 - C7 */ +- "", "", "", "", "", "", "", "", +- /* GPIO3_D0 - D8 */ +- "", "", "", "", "", "", "", ""; +-}; diff --git a/target/linux/rockchip/patches-6.6/044-v6.11-arm64-dts-rockchip-Add-sdmmc-related-properties-on-r.patch b/target/linux/rockchip/patches-6.6/044-v6.11-arm64-dts-rockchip-Add-sdmmc-related-properties-on-r.patch new file mode 100644 index 0000000000..d9e69def19 --- /dev/null +++ b/target/linux/rockchip/patches-6.6/044-v6.11-arm64-dts-rockchip-Add-sdmmc-related-properties-on-r.patch @@ -0,0 +1,32 @@ +From fc0daeccc384233eadfa9d5ddbd00159653c6bdc Mon Sep 17 00:00:00 2001 +From: Jonas Karlman +Date: Tue, 21 May 2024 21:10:07 +0000 +Subject: [PATCH] arm64: dts: rockchip: Add sdmmc related properties on + rk3308-rock-pi-s + +Add cap-mmc-highspeed to allow use of high speed MMC mode using an eMMC +to uSD board. Use disable-wp to signal that no physical write-protect +line is present. Also add vcc_io used for card and IO line power as +vmmc-supply. + +Fixes: 2e04c25b1320 ("arm64: dts: rockchip: add ROCK Pi S DTS support") +Signed-off-by: Jonas Karlman +Link: https://lore.kernel.org/r/20240521211029.1236094-5-jonas@kwiboo.se +Signed-off-by: Heiko Stuebner +--- + arch/arm64/boot/dts/rockchip/rk3308-rock-pi-s.dts | 3 +++ + 1 file changed, 3 insertions(+) + +--- a/arch/arm64/boot/dts/rockchip/rk3308-rock-pi-s.dts ++++ b/arch/arm64/boot/dts/rockchip/rk3308-rock-pi-s.dts +@@ -272,7 +272,10 @@ + }; + + &sdmmc { ++ cap-mmc-highspeed; + cap-sd-highspeed; ++ disable-wp; ++ vmmc-supply = <&vcc_io>; + status = "okay"; + }; + diff --git a/target/linux/rockchip/patches-6.6/045-v6.11-arm64-dts-rockchip-Add-pinctrl-for-UART0-to-rk3308-r.patch b/target/linux/rockchip/patches-6.6/045-v6.11-arm64-dts-rockchip-Add-pinctrl-for-UART0-to-rk3308-r.patch new file mode 100644 index 0000000000..a1ada4de25 --- /dev/null +++ b/target/linux/rockchip/patches-6.6/045-v6.11-arm64-dts-rockchip-Add-pinctrl-for-UART0-to-rk3308-r.patch @@ -0,0 +1,31 @@ +From 7affb86ef62581e3475ce3e0a7640da1f2ee29f8 Mon Sep 17 00:00:00 2001 +From: Jonas Karlman +Date: Tue, 21 May 2024 21:10:08 +0000 +Subject: [PATCH] arm64: dts: rockchip: Add pinctrl for UART0 to + rk3308-rock-pi-s + +UAR0 CTS/RTS is not wired to any pin and is not used for the default +serial console use of UART0 on ROCK Pi S. + +Override the SoC defined pinctrl props to limit configuration of the +two xfer pins wired to one of the GPIO pin headers. + +Fixes: 2e04c25b1320 ("arm64: dts: rockchip: add ROCK Pi S DTS support") +Signed-off-by: Jonas Karlman +Link: https://lore.kernel.org/r/20240521211029.1236094-6-jonas@kwiboo.se +Signed-off-by: Heiko Stuebner +--- + arch/arm64/boot/dts/rockchip/rk3308-rock-pi-s.dts | 2 ++ + 1 file changed, 2 insertions(+) + +--- a/arch/arm64/boot/dts/rockchip/rk3308-rock-pi-s.dts ++++ b/arch/arm64/boot/dts/rockchip/rk3308-rock-pi-s.dts +@@ -294,6 +294,8 @@ + }; + + &uart0 { ++ pinctrl-names = "default"; ++ pinctrl-0 = <&uart0_xfer>; + status = "okay"; + }; + diff --git a/target/linux/rockchip/patches-6.6/046-v6.11-arm64-dts-rockchip-Add-mdio-and-ethernet-phy-nodes-t.patch b/target/linux/rockchip/patches-6.6/046-v6.11-arm64-dts-rockchip-Add-mdio-and-ethernet-phy-nodes-t.patch new file mode 100644 index 0000000000..2120974ec9 --- /dev/null +++ b/target/linux/rockchip/patches-6.6/046-v6.11-arm64-dts-rockchip-Add-mdio-and-ethernet-phy-nodes-t.patch @@ -0,0 +1,61 @@ +From 4b64ed510ed946a4e4ca6d51d6512bf5361f6a04 Mon Sep 17 00:00:00 2001 +From: Jonas Karlman +Date: Tue, 21 May 2024 21:10:10 +0000 +Subject: [PATCH] arm64: dts: rockchip: Add mdio and ethernet-phy nodes to + rk3308-rock-pi-s + +Be explicit about the Ethernet port and define mdio and ethernet-phy +nodes in the device tree for ROCK Pi S. + +Fixes: bc3753aed81f ("arm64: dts: rockchip: rock-pi-s add more peripherals") +Signed-off-by: Jonas Karlman +Link: https://lore.kernel.org/r/20240521211029.1236094-8-jonas@kwiboo.se +Signed-off-by: Heiko Stuebner +--- + .../boot/dts/rockchip/rk3308-rock-pi-s.dts | 26 ++++++++++++++++--- + 1 file changed, 23 insertions(+), 3 deletions(-) + +--- a/arch/arm64/boot/dts/rockchip/rk3308-rock-pi-s.dts ++++ b/arch/arm64/boot/dts/rockchip/rk3308-rock-pi-s.dts +@@ -144,11 +144,25 @@ + + &gmac { + clock_in_out = "output"; ++ phy-handle = <&rtl8201f>; + phy-supply = <&vcc_io>; +- snps,reset-gpio = <&gpio0 RK_PA7 GPIO_ACTIVE_LOW>; +- snps,reset-active-low; +- snps,reset-delays-us = <0 50000 50000>; + status = "okay"; ++ ++ mdio { ++ compatible = "snps,dwmac-mdio"; ++ #address-cells = <1>; ++ #size-cells = <0>; ++ ++ rtl8201f: ethernet-phy@1 { ++ compatible = "ethernet-phy-ieee802.3-c22"; ++ reg = <1>; ++ pinctrl-names = "default"; ++ pinctrl-0 = <&mac_rst>; ++ reset-assert-us = <20000>; ++ reset-deassert-us = <50000>; ++ reset-gpios = <&gpio0 RK_PA7 GPIO_ACTIVE_LOW>; ++ }; ++ }; + }; + + &gpio0 { +@@ -221,6 +235,12 @@ + pinctrl-names = "default"; + pinctrl-0 = <&rtc_32k>; + ++ gmac { ++ mac_rst: mac-rst { ++ rockchip,pins = <0 RK_PA7 RK_FUNC_GPIO &pcfg_pull_none>; ++ }; ++ }; ++ + leds { + green_led: green-led { + rockchip,pins = <0 RK_PA6 RK_FUNC_GPIO &pcfg_pull_none>; diff --git a/target/linux/rockchip/patches-6.6/113-rock-pi-s-add-led-aliases-and-stop-heartbeat.patch b/target/linux/rockchip/patches-6.6/113-rock-pi-s-add-led-aliases-and-stop-heartbeat.patch new file mode 100644 index 0000000000..9564c900a2 --- /dev/null +++ b/target/linux/rockchip/patches-6.6/113-rock-pi-s-add-led-aliases-and-stop-heartbeat.patch @@ -0,0 +1,38 @@ +--- a/arch/arm64/boot/dts/rockchip/rk3308-rock-pi-s.dts ++++ b/arch/arm64/boot/dts/rockchip/rk3308-rock-pi-s.dts +@@ -17,6 +17,10 @@ + ethernet0 = &gmac; + mmc0 = &emmc; + mmc1 = &sdmmc; ++ led-boot = &blue_led; ++ led-failsafe = &blue_led; ++ led-running = &blue_led; ++ led-upgrade = &blue_led; + }; + + chosen { +@@ -28,22 +32,19 @@ + pinctrl-names = "default"; + pinctrl-0 = <&green_led>, <&heartbeat_led>; + +- green-led { ++ led-0 { + color = ; + default-state = "on"; + function = LED_FUNCTION_POWER; + gpios = <&gpio0 RK_PA6 GPIO_ACTIVE_HIGH>; +- label = "rockpis:green:power"; + linux,default-trigger = "default-on"; + }; + +- blue-led { ++ blue_led: led-1 { + color = ; + default-state = "on"; + function = LED_FUNCTION_HEARTBEAT; + gpios = <&gpio0 RK_PA5 GPIO_ACTIVE_HIGH>; +- label = "rockpis:blue:user"; +- linux,default-trigger = "heartbeat"; + }; + }; + -- 2.30.2