From bb9ebd4e714385a2592a482845865ef2d58b2868 Mon Sep 17 00:00:00 2001 From: Brian Norris Date: Tue, 31 May 2011 16:31:23 -0700 Subject: [PATCH] mtd: nand: rename NAND_USE_FLASH_BBT Recall the recently added prefix requirements: * "NAND_" for flags in nand.h, used in nand_chip.options * "NAND_BBT_" for flags in bbm.h, used in nand_chip.bbt_options or in nand_bbt_descr.options Thus, I am changing NAND_USE_FLASH_BBT to NAND_BBT_USE_FLASH. Again, this flag is found in bbm.h and so should NOT be used in the "nand_chip.options" field. Signed-off-by: Brian Norris Signed-off-by: Artem Bityutskiy --- Documentation/DocBook/mtdnand.tmpl | 2 +- arch/arm/mach-davinci/board-da830-evm.c | 2 +- arch/arm/mach-davinci/board-da850-evm.c | 2 +- arch/arm/mach-davinci/board-dm355-evm.c | 2 +- arch/arm/mach-davinci/board-dm355-leopard.c | 2 +- arch/arm/mach-davinci/board-dm365-evm.c | 2 +- arch/arm/mach-davinci/board-dm644x-evm.c | 2 +- arch/arm/mach-davinci/board-mityomapl138.c | 2 +- arch/arm/mach-davinci/board-neuros-osd2.c | 2 +- arch/arm/mach-davinci/board-tnetv107x-evm.c | 2 +- arch/arm/mach-davinci/include/mach/nand.h | 2 +- arch/arm/mach-orion5x/ts78xx-setup.c | 2 +- arch/cris/arch-v32/drivers/mach-a3/nandflash.c | 2 +- arch/cris/arch-v32/drivers/mach-fs/nandflash.c | 2 +- drivers/mtd/nand/atmel_nand.c | 2 +- drivers/mtd/nand/autcpu12.c | 4 ++-- drivers/mtd/nand/bcm_umi_nand.c | 2 +- drivers/mtd/nand/cafe_nand.c | 2 +- drivers/mtd/nand/cs553x_nand.c | 2 +- drivers/mtd/nand/davinci_nand.c | 2 +- drivers/mtd/nand/denali.c | 2 +- drivers/mtd/nand/diskonchip.c | 2 +- drivers/mtd/nand/fsl_elbc_nand.c | 2 +- drivers/mtd/nand/mpc5121_nfc.c | 2 +- drivers/mtd/nand/mxc_nand.c | 2 +- drivers/mtd/nand/nand_base.c | 2 +- drivers/mtd/nand/nand_bbt.c | 12 ++++++------ drivers/mtd/nand/nandsim.c | 2 +- drivers/mtd/nand/pasemi_nand.c | 2 +- drivers/mtd/nand/s3c2410.c | 2 +- include/linux/mtd/bbm.h | 2 +- 31 files changed, 37 insertions(+), 37 deletions(-) diff --git a/Documentation/DocBook/mtdnand.tmpl b/Documentation/DocBook/mtdnand.tmpl index 05cc83ea8ef7..8c07540c181c 100644 --- a/Documentation/DocBook/mtdnand.tmpl +++ b/Documentation/DocBook/mtdnand.tmpl @@ -572,7 +572,7 @@ static void board_select_chip (struct mtd_info *mtd, int chip) The simplest way to activate the FLASH based bad block table support - is to set the option NAND_USE_FLASH_BBT in the bbt_option field of + is to set the option NAND_BBT_USE_FLASH in the bbt_option field of the nand chip structure before calling nand_scan(). For AG-AND chips is this done by default. This activates the default FLASH based bad block table functionality diff --git a/arch/arm/mach-davinci/board-da830-evm.c b/arch/arm/mach-davinci/board-da830-evm.c index a790c1b363ff..0b36fd54fc47 100644 --- a/arch/arm/mach-davinci/board-da830-evm.c +++ b/arch/arm/mach-davinci/board-da830-evm.c @@ -377,7 +377,7 @@ static struct davinci_nand_pdata da830_evm_nand_pdata = { .nr_parts = ARRAY_SIZE(da830_evm_nand_partitions), .ecc_mode = NAND_ECC_HW, .ecc_bits = 4, - .bbt_options = NAND_USE_FLASH_BBT, + .bbt_options = NAND_BBT_USE_FLASH, .bbt_td = &da830_evm_nand_bbt_main_descr, .bbt_md = &da830_evm_nand_bbt_mirror_descr, .timing = &da830_evm_nandflash_timing, diff --git a/arch/arm/mach-davinci/board-da850-evm.c b/arch/arm/mach-davinci/board-da850-evm.c index de27111d1b27..8193d340de22 100644 --- a/arch/arm/mach-davinci/board-da850-evm.c +++ b/arch/arm/mach-davinci/board-da850-evm.c @@ -225,7 +225,7 @@ static struct davinci_nand_pdata da850_evm_nandflash_data = { .nr_parts = ARRAY_SIZE(da850_evm_nandflash_partition), .ecc_mode = NAND_ECC_HW, .ecc_bits = 4, - .bbt_options = NAND_USE_FLASH_BBT, + .bbt_options = NAND_BBT_USE_FLASH, .timing = &da850_evm_nandflash_timing, }; diff --git a/arch/arm/mach-davinci/board-dm355-evm.c b/arch/arm/mach-davinci/board-dm355-evm.c index fd2de2c0338b..fe617790fe2b 100644 --- a/arch/arm/mach-davinci/board-dm355-evm.c +++ b/arch/arm/mach-davinci/board-dm355-evm.c @@ -77,7 +77,7 @@ static struct davinci_nand_pdata davinci_nand_data = { .parts = davinci_nand_partitions, .nr_parts = ARRAY_SIZE(davinci_nand_partitions), .ecc_mode = NAND_ECC_HW, - .bbt_options = NAND_USE_FLASH_BBT, + .bbt_options = NAND_BBT_USE_FLASH, .ecc_bits = 4, }; diff --git a/arch/arm/mach-davinci/board-dm355-leopard.c b/arch/arm/mach-davinci/board-dm355-leopard.c index cfbd897e6611..249c35512748 100644 --- a/arch/arm/mach-davinci/board-dm355-leopard.c +++ b/arch/arm/mach-davinci/board-dm355-leopard.c @@ -74,7 +74,7 @@ static struct davinci_nand_pdata davinci_nand_data = { .parts = davinci_nand_partitions, .nr_parts = ARRAY_SIZE(davinci_nand_partitions), .ecc_mode = NAND_ECC_HW_SYNDROME, - .bbt_options = NAND_USE_FLASH_BBT, + .bbt_options = NAND_BBT_USE_FLASH, }; static struct resource davinci_nand_resources[] = { diff --git a/arch/arm/mach-davinci/board-dm365-evm.c b/arch/arm/mach-davinci/board-dm365-evm.c index e66116ddea4f..e555267f2492 100644 --- a/arch/arm/mach-davinci/board-dm365-evm.c +++ b/arch/arm/mach-davinci/board-dm365-evm.c @@ -139,7 +139,7 @@ static struct davinci_nand_pdata davinci_nand_data = { .parts = davinci_nand_partitions, .nr_parts = ARRAY_SIZE(davinci_nand_partitions), .ecc_mode = NAND_ECC_HW, - .bbt_options = NAND_USE_FLASH_BBT, + .bbt_options = NAND_BBT_USE_FLASH, .ecc_bits = 4, }; diff --git a/arch/arm/mach-davinci/board-dm644x-evm.c b/arch/arm/mach-davinci/board-dm644x-evm.c index dde204933c9e..8fd305264e83 100644 --- a/arch/arm/mach-davinci/board-dm644x-evm.c +++ b/arch/arm/mach-davinci/board-dm644x-evm.c @@ -150,7 +150,7 @@ static struct davinci_nand_pdata davinci_evm_nandflash_data = { .parts = davinci_evm_nandflash_partition, .nr_parts = ARRAY_SIZE(davinci_evm_nandflash_partition), .ecc_mode = NAND_ECC_HW, - .bbt_options = NAND_USE_FLASH_BBT, + .bbt_options = NAND_BBT_USE_FLASH, .timing = &davinci_evm_nandflash_timing, }; diff --git a/arch/arm/mach-davinci/board-mityomapl138.c b/arch/arm/mach-davinci/board-mityomapl138.c index ef7ba494493d..dffab31670f7 100644 --- a/arch/arm/mach-davinci/board-mityomapl138.c +++ b/arch/arm/mach-davinci/board-mityomapl138.c @@ -396,7 +396,7 @@ static struct davinci_nand_pdata mityomapl138_nandflash_data = { .parts = mityomapl138_nandflash_partition, .nr_parts = ARRAY_SIZE(mityomapl138_nandflash_partition), .ecc_mode = NAND_ECC_HW, - .bbt_options = NAND_USE_FLASH_BBT, + .bbt_options = NAND_BBT_USE_FLASH, .options = NAND_BUSWIDTH_16, .ecc_bits = 1, /* 4 bit mode is not supported with 16 bit NAND */ }; diff --git a/arch/arm/mach-davinci/board-neuros-osd2.c b/arch/arm/mach-davinci/board-neuros-osd2.c index 1989768973a7..70dcf9f30213 100644 --- a/arch/arm/mach-davinci/board-neuros-osd2.c +++ b/arch/arm/mach-davinci/board-neuros-osd2.c @@ -87,7 +87,7 @@ static struct davinci_nand_pdata davinci_ntosd2_nandflash_data = { .parts = davinci_ntosd2_nandflash_partition, .nr_parts = ARRAY_SIZE(davinci_ntosd2_nandflash_partition), .ecc_mode = NAND_ECC_HW, - .bbt_options = NAND_USE_FLASH_BBT, + .bbt_options = NAND_BBT_USE_FLASH, }; static struct resource davinci_ntosd2_nandflash_resource[] = { diff --git a/arch/arm/mach-davinci/board-tnetv107x-evm.c b/arch/arm/mach-davinci/board-tnetv107x-evm.c index 046f8e00938e..75383df868ff 100644 --- a/arch/arm/mach-davinci/board-tnetv107x-evm.c +++ b/arch/arm/mach-davinci/board-tnetv107x-evm.c @@ -144,7 +144,7 @@ static struct davinci_nand_pdata nand_config = { .parts = nand_partitions, .nr_parts = ARRAY_SIZE(nand_partitions), .ecc_mode = NAND_ECC_HW, - .bbt_options = NAND_USE_FLASH_BBT, + .bbt_options = NAND_BBT_USE_FLASH, .ecc_bits = 1, }; diff --git a/arch/arm/mach-davinci/include/mach/nand.h b/arch/arm/mach-davinci/include/mach/nand.h index 2c506f905cb8..1cf555aef896 100644 --- a/arch/arm/mach-davinci/include/mach/nand.h +++ b/arch/arm/mach-davinci/include/mach/nand.h @@ -76,7 +76,7 @@ struct davinci_nand_pdata { /* platform_data */ /* e.g. NAND_BUSWIDTH_16 */ unsigned options; - /* e.g. NAND_USE_FLASH_BBT */ + /* e.g. NAND_BBT_USE_FLASH */ unsigned bbt_options; /* Main and mirror bbt descriptor overrides */ diff --git a/arch/arm/mach-orion5x/ts78xx-setup.c b/arch/arm/mach-orion5x/ts78xx-setup.c index e5ca57ce6e50..8ae53015eeb8 100644 --- a/arch/arm/mach-orion5x/ts78xx-setup.c +++ b/arch/arm/mach-orion5x/ts78xx-setup.c @@ -275,7 +275,7 @@ static struct platform_nand_data ts78xx_ts_nand_data = { .partitions = ts78xx_ts_nand_parts, .nr_partitions = ARRAY_SIZE(ts78xx_ts_nand_parts), .chip_delay = 15, - .bbt_options = NAND_USE_FLASH_BBT, + .bbt_options = NAND_BBT_USE_FLASH, }, .ctrl = { /* diff --git a/arch/cris/arch-v32/drivers/mach-a3/nandflash.c b/arch/cris/arch-v32/drivers/mach-a3/nandflash.c index fdd11c12b759..7fb52128ddc9 100644 --- a/arch/cris/arch-v32/drivers/mach-a3/nandflash.c +++ b/arch/cris/arch-v32/drivers/mach-a3/nandflash.c @@ -163,7 +163,7 @@ struct mtd_info *__init crisv32_nand_flash_probe(void) this->ecc.mode = NAND_ECC_SOFT; /* Enable the following for a flash based bad block table */ - /* this->bbt_options = NAND_USE_FLASH_BBT; */ + /* this->bbt_options = NAND_BBT_USE_FLASH; */ /* Scan to find existence of the device */ if (nand_scan(crisv32_mtd, 1)) { diff --git a/arch/cris/arch-v32/drivers/mach-fs/nandflash.c b/arch/cris/arch-v32/drivers/mach-fs/nandflash.c index 3368177bdd3b..e03238454b0e 100644 --- a/arch/cris/arch-v32/drivers/mach-fs/nandflash.c +++ b/arch/cris/arch-v32/drivers/mach-fs/nandflash.c @@ -154,7 +154,7 @@ struct mtd_info *__init crisv32_nand_flash_probe(void) this->ecc.mode = NAND_ECC_SOFT; /* Enable the following for a flash based bad block table */ - /* this->bbt_options = NAND_USE_FLASH_BBT; */ + /* this->bbt_options = NAND_BBT_USE_FLASH; */ /* Scan to find existence of the device */ if (nand_scan(crisv32_mtd, 1)) { diff --git a/drivers/mtd/nand/atmel_nand.c b/drivers/mtd/nand/atmel_nand.c index 78d551622e11..79a7ef276616 100644 --- a/drivers/mtd/nand/atmel_nand.c +++ b/drivers/mtd/nand/atmel_nand.c @@ -583,7 +583,7 @@ static int __init atmel_nand_probe(struct platform_device *pdev) if (on_flash_bbt) { printk(KERN_INFO "atmel_nand: Use On Flash BBT\n"); - nand_chip->bbt_options |= NAND_USE_FLASH_BBT; + nand_chip->bbt_options |= NAND_BBT_USE_FLASH; } if (!cpu_has_dma()) diff --git a/drivers/mtd/nand/autcpu12.c b/drivers/mtd/nand/autcpu12.c index adf934df8958..2e42ec2e8ff4 100644 --- a/drivers/mtd/nand/autcpu12.c +++ b/drivers/mtd/nand/autcpu12.c @@ -172,9 +172,9 @@ static int __init autcpu12_init(void) /* Enable the following for a flash based bad block table */ /* - this->bbt_options = NAND_USE_FLASH_BBT; + this->bbt_options = NAND_BBT_USE_FLASH; */ - this->bbt_options = NAND_USE_FLASH_BBT; + this->bbt_options = NAND_BBT_USE_FLASH; /* Scan to find existence of the device */ if (nand_scan(autcpu12_mtd, 1)) { diff --git a/drivers/mtd/nand/bcm_umi_nand.c b/drivers/mtd/nand/bcm_umi_nand.c index 974d9bc8e48e..e3ffc4c908e4 100644 --- a/drivers/mtd/nand/bcm_umi_nand.c +++ b/drivers/mtd/nand/bcm_umi_nand.c @@ -474,7 +474,7 @@ static int __devinit bcm_umi_nand_probe(struct platform_device *pdev) #if NAND_ECC_BCH if (board_mtd->writesize > 512) { - if (this->bbt_options & NAND_USE_FLASH_BBT) + if (this->bbt_options & NAND_BBT_USE_FLASH) largepage_bbt.options = NAND_BBT_SCAN2NDPAGE; this->badblock_pattern = &largepage_bbt; } diff --git a/drivers/mtd/nand/cafe_nand.c b/drivers/mtd/nand/cafe_nand.c index 7dd7d844d2cf..d0eed498ed2b 100644 --- a/drivers/mtd/nand/cafe_nand.c +++ b/drivers/mtd/nand/cafe_nand.c @@ -686,7 +686,7 @@ static int __devinit cafe_nand_probe(struct pci_dev *pdev, cafe->nand.chip_delay = 0; /* Enable the following for a flash based bad block table */ - cafe->nand.bbt_options = NAND_USE_FLASH_BBT; + cafe->nand.bbt_options = NAND_BBT_USE_FLASH; cafe->nand.options = NAND_NO_AUTOINCR | NAND_OWN_BUFFERS; if (skipbbt) { diff --git a/drivers/mtd/nand/cs553x_nand.c b/drivers/mtd/nand/cs553x_nand.c index 05adedd8c20c..b35496143e74 100644 --- a/drivers/mtd/nand/cs553x_nand.c +++ b/drivers/mtd/nand/cs553x_nand.c @@ -239,7 +239,7 @@ static int __init cs553x_init_one(int cs, int mmio, unsigned long adr) this->ecc.correct = nand_correct_data; /* Enable the following for a flash based bad block table */ - this->bbt_options = NAND_USE_FLASH_BBT; + this->bbt_options = NAND_BBT_USE_FLASH; this->options = NAND_NO_AUTOINCR; /* Scan to find existence of the device */ diff --git a/drivers/mtd/nand/davinci_nand.c b/drivers/mtd/nand/davinci_nand.c index 69f70195ff35..a4c82b4344ba 100644 --- a/drivers/mtd/nand/davinci_nand.c +++ b/drivers/mtd/nand/davinci_nand.c @@ -581,7 +581,7 @@ static int __init nand_davinci_probe(struct platform_device *pdev) info->chip.chip_delay = 0; info->chip.select_chip = nand_davinci_select_chip; - /* options such as NAND_USE_FLASH_BBT */ + /* options such as NAND_BBT_USE_FLASH */ info->chip.bbt_options = pdata->bbt_options; /* options such as 16-bit widths */ info->chip.options = pdata->options; diff --git a/drivers/mtd/nand/denali.c b/drivers/mtd/nand/denali.c index dbb6fbae7d25..ee3014505af2 100644 --- a/drivers/mtd/nand/denali.c +++ b/drivers/mtd/nand/denali.c @@ -1577,7 +1577,7 @@ static int denali_pci_probe(struct pci_dev *dev, const struct pci_device_id *id) denali->nand.bbt_md = &bbt_mirror_descr; /* skip the scan for now until we have OOB read and write support */ - denali->nand.bbt_options |= NAND_USE_FLASH_BBT; + denali->nand.bbt_options |= NAND_BBT_USE_FLASH; denali->nand.options |= NAND_SKIP_BBTSCAN; denali->nand.ecc.mode = NAND_ECC_HW_SYNDROME; diff --git a/drivers/mtd/nand/diskonchip.c b/drivers/mtd/nand/diskonchip.c index f70bc73e7948..b657d7f9b05c 100644 --- a/drivers/mtd/nand/diskonchip.c +++ b/drivers/mtd/nand/diskonchip.c @@ -1652,7 +1652,7 @@ static int __init doc_probe(unsigned long physadr) nand->ecc.mode = NAND_ECC_HW_SYNDROME; nand->ecc.size = 512; nand->ecc.bytes = 6; - nand->bbt_options = NAND_USE_FLASH_BBT; + nand->bbt_options = NAND_BBT_USE_FLASH; doc->physadr = physadr; doc->virtadr = virtadr; diff --git a/drivers/mtd/nand/fsl_elbc_nand.c b/drivers/mtd/nand/fsl_elbc_nand.c index bff4791d73c3..d4ea5fe013b7 100644 --- a/drivers/mtd/nand/fsl_elbc_nand.c +++ b/drivers/mtd/nand/fsl_elbc_nand.c @@ -792,7 +792,7 @@ static int fsl_elbc_chip_init(struct fsl_elbc_mtd *priv) /* set up nand options */ chip->options = NAND_NO_READRDY | NAND_NO_AUTOINCR; - chip->bbt_options = NAND_USE_FLASH_BBT; + chip->bbt_options = NAND_BBT_USE_FLASH; chip->controller = &elbc_fcm_ctrl->controller; chip->priv = priv; diff --git a/drivers/mtd/nand/mpc5121_nfc.c b/drivers/mtd/nand/mpc5121_nfc.c index 0ac64b54bd67..2f2c35a7771e 100644 --- a/drivers/mtd/nand/mpc5121_nfc.c +++ b/drivers/mtd/nand/mpc5121_nfc.c @@ -736,7 +736,7 @@ static int __devinit mpc5121_nfc_probe(struct platform_device *op) chip->verify_buf = mpc5121_nfc_verify_buf; chip->select_chip = mpc5121_nfc_select_chip; chip->options = NAND_NO_AUTOINCR; - chip->bbt_options = NAND_USE_FLASH_BBT; + chip->bbt_options = NAND_BBT_USE_FLASH; chip->ecc.mode = NAND_ECC_SOFT; /* Support external chip-select logic on ADS5121 board */ diff --git a/drivers/mtd/nand/mxc_nand.c b/drivers/mtd/nand/mxc_nand.c index ed68fde3d1be..ca42c8f335b3 100644 --- a/drivers/mtd/nand/mxc_nand.c +++ b/drivers/mtd/nand/mxc_nand.c @@ -1179,7 +1179,7 @@ static int __init mxcnd_probe(struct platform_device *pdev) this->bbt_td = &bbt_main_descr; this->bbt_md = &bbt_mirror_descr; /* update flash based bbt */ - this->bbt_options |= NAND_USE_FLASH_BBT; + this->bbt_options |= NAND_BBT_USE_FLASH; } init_completion(&host->op_completion); diff --git a/drivers/mtd/nand/nand_base.c b/drivers/mtd/nand/nand_base.c index d39dffe71de4..422e7872d6db 100644 --- a/drivers/mtd/nand/nand_base.c +++ b/drivers/mtd/nand/nand_base.c @@ -405,7 +405,7 @@ static int nand_default_block_markbad(struct mtd_info *mtd, loff_t ofs) chip->bbt[block >> 2] |= 0x01 << ((block & 0x03) << 1); /* Do we have a flash based bad block table ? */ - if (chip->bbt_options & NAND_USE_FLASH_BBT) + if (chip->bbt_options & NAND_BBT_USE_FLASH) ret = nand_update_bbt(mtd, ofs); else { nand_get_device(chip, mtd, FL_WRITING); diff --git a/drivers/mtd/nand/nand_bbt.c b/drivers/mtd/nand/nand_bbt.c index 66f93e2ac16b..dfea9fd1d61c 100644 --- a/drivers/mtd/nand/nand_bbt.c +++ b/drivers/mtd/nand/nand_bbt.c @@ -14,7 +14,7 @@ * * When nand_scan_bbt is called, then it tries to find the bad block table * depending on the options in the BBT descriptor(s). If no flash based BBT - * (NAND_USE_FLASH_BBT) is specified then the device is scanned for factory + * (NAND_BBT_USE_FLASH) is specified then the device is scanned for factory * marked good / bad blocks. This information is used to create a memory BBT. * Once a new bad block is discovered then the "factory" information is updated * on the device. @@ -36,7 +36,7 @@ * The table is marked in the OOB area with an ident pattern and a version * number which indicates which of both tables is more up to date. If the NAND * controller needs the complete OOB area for the ECC information then the - * option NAND_BBT_NO_OOB should be used (along with NAND_USE_FLASH_BBT, of + * option NAND_BBT_NO_OOB should be used (along with NAND_BBT_USE_FLASH, of * course): it moves the ident pattern and the version byte into the data area * and the OOB area will remain untouched. * @@ -1083,14 +1083,14 @@ static void verify_bbt_descr(struct mtd_info *mtd, struct nand_bbt_descr *bd) bits = bd->options & NAND_BBT_NRBITS_MSK; BUG_ON((this->bbt_options & NAND_BBT_NO_OOB) && - !(this->bbt_options & NAND_USE_FLASH_BBT)); + !(this->bbt_options & NAND_BBT_USE_FLASH)); BUG_ON(!bits); if (bd->options & NAND_BBT_VERSION) pattern_len++; if (bd->options & NAND_BBT_NO_OOB) { - BUG_ON(!(this->bbt_options & NAND_USE_FLASH_BBT)); + BUG_ON(!(this->bbt_options & NAND_BBT_USE_FLASH)); BUG_ON(!(this->bbt_options & NAND_BBT_NO_OOB)); BUG_ON(bd->offs); if (bd->options & NAND_BBT_VERSION) @@ -1357,12 +1357,12 @@ int nand_default_bbt(struct mtd_info *mtd) this->bbt_td = &bbt_main_descr; this->bbt_md = &bbt_mirror_descr; } - this->bbt_options |= NAND_USE_FLASH_BBT; + this->bbt_options |= NAND_BBT_USE_FLASH; return nand_scan_bbt(mtd, &agand_flashbased); } /* Is a flash based bad block table requested ? */ - if (this->bbt_options & NAND_USE_FLASH_BBT) { + if (this->bbt_options & NAND_BBT_USE_FLASH) { /* Use the default pattern descriptors */ if (!this->bbt_td) { if (this->bbt_options & NAND_BBT_NO_OOB) { diff --git a/drivers/mtd/nand/nandsim.c b/drivers/mtd/nand/nandsim.c index 1856c42c62c4..34c03be77301 100644 --- a/drivers/mtd/nand/nandsim.c +++ b/drivers/mtd/nand/nandsim.c @@ -2275,7 +2275,7 @@ static int __init ns_init_module(void) case 2: chip->bbt_options |= NAND_BBT_NO_OOB; case 1: - chip->bbt_options |= NAND_USE_FLASH_BBT; + chip->bbt_options |= NAND_BBT_USE_FLASH; case 0: break; default: diff --git a/drivers/mtd/nand/pasemi_nand.c b/drivers/mtd/nand/pasemi_nand.c index 1c17f091e16b..a97264ececdb 100644 --- a/drivers/mtd/nand/pasemi_nand.c +++ b/drivers/mtd/nand/pasemi_nand.c @@ -156,7 +156,7 @@ static int __devinit pasemi_nand_probe(struct platform_device *ofdev) /* Enable the following for a flash based bad block table */ chip->options = NAND_NO_AUTOINCR; - chip->bbt_options = NAND_USE_FLASH_BBT; + chip->bbt_options = NAND_BBT_USE_FLASH; /* Scan to find existence of the device */ if (nand_scan(pasemi_nand_mtd, 1)) { diff --git a/drivers/mtd/nand/s3c2410.c b/drivers/mtd/nand/s3c2410.c index 370516c3f7c7..ec280798e221 100644 --- a/drivers/mtd/nand/s3c2410.c +++ b/drivers/mtd/nand/s3c2410.c @@ -881,7 +881,7 @@ static void s3c2410_nand_init_chip(struct s3c2410_nand_info *info, * let the kernel fish out the BBT from the NAND, and also skip the * full NAND scan that can take 1/2s or so. Little things... */ if (set->flash_bbt) { - chip->bbt_options |= NAND_USE_FLASH_BBT; + chip->bbt_options |= NAND_BBT_USE_FLASH; chip->options |= NAND_SKIP_BBTSCAN; } } diff --git a/include/linux/mtd/bbm.h b/include/linux/mtd/bbm.h index 7929514781ea..ff18c0850519 100644 --- a/include/linux/mtd/bbm.h +++ b/include/linux/mtd/bbm.h @@ -104,7 +104,7 @@ struct nand_bbt_descr { * Use a flash based bad block table. By default, OOB identifier is saved in * OOB area. This option is passed to the default bad block table function. */ -#define NAND_USE_FLASH_BBT 0x00040000 +#define NAND_BBT_USE_FLASH 0x00040000 /* Do not store flash based bad block table in OOB area; store it in-band */ #define NAND_BBT_NO_OOB 0x00080000 -- 2.30.2