From bb488f31f4997f204093481237c96db1a0b1747f Mon Sep 17 00:00:00 2001 From: Florian Fainelli Date: Thu, 21 May 2009 19:39:59 +0000 Subject: [PATCH] add missing 2.6.23 files, fixes build failures on rb532 SVN-Revision: 15972 --- .../files-2.6.23/drivers/char/gpio_dev.c | 201 +++ .../drivers/input/misc/gpio_buttons.c | 209 +++ .../files-2.6.23/drivers/leds/leds-alix.c | 172 +++ .../drivers/leds/ledtrig-default-on.c | 45 + .../files-2.6.23/drivers/leds/ledtrig-morse.c | 365 +++++ .../drivers/leds/ledtrig-netdev.c | 451 +++++++ .../files-2.6.23/drivers/net/phy/adm6996.c | 170 +++ .../files-2.6.23/drivers/net/phy/adm6996.h | 105 ++ .../files-2.6.23/drivers/net/phy/mvswitch.c | 474 +++++++ .../files-2.6.23/drivers/net/phy/mvswitch.h | 145 ++ .../files-2.6.23/drivers/spi/spi_gpio.c | 242 ++++ .../files-2.6.23/drivers/ssb/Kconfig | 117 ++ .../files-2.6.23/drivers/ssb/Makefile | 18 + .../files-2.6.23/drivers/ssb/b43_pci_bridge.c | 50 + .../drivers/ssb/driver_chipcommon.c | 445 +++++++ .../files-2.6.23/drivers/ssb/driver_extif.c | 129 ++ .../drivers/ssb/driver_mipscore.c | 225 ++++ .../files-2.6.23/drivers/ssb/driver_pcicore.c | 576 ++++++++ .../files-2.6.23/drivers/ssb/main.c | 1169 +++++++++++++++++ .../files-2.6.23/drivers/ssb/pci.c | 790 +++++++++++ .../drivers/ssb/pcihost_wrapper.c | 104 ++ .../files-2.6.23/drivers/ssb/pcmcia.c | 287 ++++ .../files-2.6.23/drivers/ssb/scan.c | 424 ++++++ .../files-2.6.23/drivers/ssb/ssb_private.h | 136 ++ .../files-2.6.23/include/linux/gpio_buttons.h | 35 + .../files-2.6.23/include/linux/gpio_dev.h | 11 + .../files-2.6.23/include/linux/spi/spi_gpio.h | 53 + .../files-2.6.23/include/linux/ssb/ssb.h | 404 ++++++ .../include/linux/ssb/ssb_driver_chipcommon.h | 396 ++++++ .../include/linux/ssb/ssb_driver_extif.h | 204 +++ .../include/linux/ssb/ssb_driver_mips.h | 46 + .../include/linux/ssb/ssb_driver_pci.h | 106 ++ .../files-2.6.23/include/linux/ssb/ssb_regs.h | 357 +++++ 33 files changed, 8661 insertions(+) create mode 100644 target/linux/generic-2.6/files-2.6.23/drivers/char/gpio_dev.c create mode 100644 target/linux/generic-2.6/files-2.6.23/drivers/input/misc/gpio_buttons.c create mode 100644 target/linux/generic-2.6/files-2.6.23/drivers/leds/leds-alix.c create mode 100644 target/linux/generic-2.6/files-2.6.23/drivers/leds/ledtrig-default-on.c create mode 100644 target/linux/generic-2.6/files-2.6.23/drivers/leds/ledtrig-morse.c create mode 100644 target/linux/generic-2.6/files-2.6.23/drivers/leds/ledtrig-netdev.c create mode 100644 target/linux/generic-2.6/files-2.6.23/drivers/net/phy/adm6996.c create mode 100644 target/linux/generic-2.6/files-2.6.23/drivers/net/phy/adm6996.h create mode 100644 target/linux/generic-2.6/files-2.6.23/drivers/net/phy/mvswitch.c create mode 100644 target/linux/generic-2.6/files-2.6.23/drivers/net/phy/mvswitch.h create mode 100644 target/linux/generic-2.6/files-2.6.23/drivers/spi/spi_gpio.c create mode 100644 target/linux/generic-2.6/files-2.6.23/drivers/ssb/Kconfig create mode 100644 target/linux/generic-2.6/files-2.6.23/drivers/ssb/Makefile create mode 100644 target/linux/generic-2.6/files-2.6.23/drivers/ssb/b43_pci_bridge.c create mode 100644 target/linux/generic-2.6/files-2.6.23/drivers/ssb/driver_chipcommon.c create mode 100644 target/linux/generic-2.6/files-2.6.23/drivers/ssb/driver_extif.c create mode 100644 target/linux/generic-2.6/files-2.6.23/drivers/ssb/driver_mipscore.c create mode 100644 target/linux/generic-2.6/files-2.6.23/drivers/ssb/driver_pcicore.c create mode 100644 target/linux/generic-2.6/files-2.6.23/drivers/ssb/main.c create mode 100644 target/linux/generic-2.6/files-2.6.23/drivers/ssb/pci.c create mode 100644 target/linux/generic-2.6/files-2.6.23/drivers/ssb/pcihost_wrapper.c create mode 100644 target/linux/generic-2.6/files-2.6.23/drivers/ssb/pcmcia.c create mode 100644 target/linux/generic-2.6/files-2.6.23/drivers/ssb/scan.c create mode 100644 target/linux/generic-2.6/files-2.6.23/drivers/ssb/ssb_private.h create mode 100644 target/linux/generic-2.6/files-2.6.23/include/linux/gpio_buttons.h create mode 100644 target/linux/generic-2.6/files-2.6.23/include/linux/gpio_dev.h create mode 100644 target/linux/generic-2.6/files-2.6.23/include/linux/spi/spi_gpio.h create mode 100644 target/linux/generic-2.6/files-2.6.23/include/linux/ssb/ssb.h create mode 100644 target/linux/generic-2.6/files-2.6.23/include/linux/ssb/ssb_driver_chipcommon.h create mode 100644 target/linux/generic-2.6/files-2.6.23/include/linux/ssb/ssb_driver_extif.h create mode 100644 target/linux/generic-2.6/files-2.6.23/include/linux/ssb/ssb_driver_mips.h create mode 100644 target/linux/generic-2.6/files-2.6.23/include/linux/ssb/ssb_driver_pci.h create mode 100644 target/linux/generic-2.6/files-2.6.23/include/linux/ssb/ssb_regs.h diff --git a/target/linux/generic-2.6/files-2.6.23/drivers/char/gpio_dev.c b/target/linux/generic-2.6/files-2.6.23/drivers/char/gpio_dev.c new file mode 100644 index 0000000000..4dc637471c --- /dev/null +++ b/target/linux/generic-2.6/files-2.6.23/drivers/char/gpio_dev.c @@ -0,0 +1,201 @@ +/* + * character device wrapper for generic gpio layer + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA02111-1307USA + * + * Feedback, Bugs... blogic@openwrt.org + * + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#define DRVNAME "gpiodev" +#define DEVNAME "gpio" + +static int dev_major; +static unsigned int gpio_access_mask; +static struct class *gpiodev_class; + +/* Counter is 1, if the device is not opened and zero (or less) if opened. */ +static atomic_t gpio_open_cnt = ATOMIC_INIT(1); + +static int +gpio_ioctl(struct inode * inode, struct file * file, unsigned int cmd, unsigned long arg) +{ + int retval = 0; + + if (((1 << arg) & gpio_access_mask) != (1 << arg)) + { + retval = -EINVAL; + goto out; + } + + switch (cmd) + { + case GPIO_GET: + retval = gpio_get_value(arg); + break; + + case GPIO_SET: + gpio_set_value(arg, 1); + break; + + case GPIO_CLEAR: + gpio_set_value(arg, 0); + break; + + case GPIO_DIR_IN: + gpio_direction_input(arg); + break; + + case GPIO_DIR_OUT: + gpio_direction_output(arg, 0); + break; + + default: + retval = -EINVAL; + break; + } + +out: + return retval; +} + +static int +gpio_open(struct inode *inode, struct file *file) +{ + int result = 0; + unsigned int dev_minor = MINOR(inode->i_rdev); + + if (dev_minor != 0) + { + printk(KERN_ERR DRVNAME ": trying to access unknown minor device -> %d\n", dev_minor); + result = -ENODEV; + goto out; + } + + /* FIXME: We should really allow multiple applications to open the device + * at the same time, as long as the apps access different IO pins. + * The generic gpio-registration functions can be used for that. + * Two new IOCTLs have to be introduced for that. Need to check userspace + * compatibility first. --mb */ + if (!atomic_dec_and_test(&gpio_open_cnt)) { + atomic_inc(&gpio_open_cnt); + printk(KERN_ERR DRVNAME ": Device with minor ID %d already in use\n", dev_minor); + result = -EBUSY; + goto out; + } + +out: + return result; +} + +static int +gpio_close(struct inode * inode, struct file * file) +{ + smp_mb__before_atomic_inc(); + atomic_inc(&gpio_open_cnt); + + return 0; +} + +struct file_operations gpio_fops = { + ioctl: gpio_ioctl, + open: gpio_open, + release: gpio_close +}; + +static int +gpio_probe(struct platform_device *dev) +{ + int result = 0; + + dev_major = register_chrdev(0, DEVNAME, &gpio_fops); + if (!dev_major) + { + printk(KERN_ERR DRVNAME ": Error whilst opening %s \n", DEVNAME); + result = -ENODEV; + goto out; + } + + gpiodev_class = class_create(THIS_MODULE, DRVNAME); + class_device_create(gpiodev_class, NULL, MKDEV(dev_major, 0), NULL, DEVNAME); + + printk(KERN_INFO DRVNAME ": gpio device registered with major %d\n", dev_major); + + if (dev->num_resources != 1) + { + printk(KERN_ERR DRVNAME ": device may only have 1 resource\n"); + result = -ENODEV; + goto out; + } + + gpio_access_mask = dev->resource[0].start; + + printk(KERN_INFO DRVNAME ": gpio platform device registered with access mask %08X\n", gpio_access_mask); +out: + return result; +} + +static int +gpio_remove(struct platform_device *dev) +{ + unregister_chrdev(dev_major, DEVNAME); + return 0; +} + +static struct +platform_driver gpio_driver = { + .probe = gpio_probe, + .remove = gpio_remove, + .driver = { + .name = "GPIODEV", + .owner = THIS_MODULE, + }, +}; + +static int __init +gpio_mod_init(void) +{ + int ret = platform_driver_register(&gpio_driver); + if (ret) + printk(KERN_INFO DRVNAME ": Error registering platfom driver!"); + + return ret; +} + +static void __exit +gpio_mod_exit(void) +{ + platform_driver_unregister(&gpio_driver); +} + +module_init (gpio_mod_init); +module_exit (gpio_mod_exit); + +MODULE_LICENSE("GPL"); +MODULE_AUTHOR("John Crispin / OpenWrt"); +MODULE_DESCRIPTION("Character device for for generic gpio api"); diff --git a/target/linux/generic-2.6/files-2.6.23/drivers/input/misc/gpio_buttons.c b/target/linux/generic-2.6/files-2.6.23/drivers/input/misc/gpio_buttons.c new file mode 100644 index 0000000000..83a8178340 --- /dev/null +++ b/target/linux/generic-2.6/files-2.6.23/drivers/input/misc/gpio_buttons.c @@ -0,0 +1,209 @@ +/* + * Driver for buttons on GPIO lines not capable of generating interrupts + * + * Copyright (C) 2007,2008 Gabor Juhos + * + * This file was based on: /drivers/input/misc/cobalt_btns.c + * Copyright (C) 2007 Yoichi Yuasa + * + * also was based on: /drivers/input/keyboard/gpio_keys.c + * Copyright 2005 Phil Blundell + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + */ + +#include +#include +#include + +#include +#include +#include +#include + +#include + +#include + +#define DRV_NAME "gpio-buttons" +#define DRV_VERSION "0.1.1" +#define PFX DRV_NAME ": " + +struct gpio_buttons_dev { + struct input_polled_dev *poll_dev; + struct gpio_buttons_platform_data *pdata; +}; + +static void gpio_buttons_poll(struct input_polled_dev *dev) +{ + struct gpio_buttons_dev *bdev = dev->private; + struct gpio_buttons_platform_data *pdata = bdev->pdata; + struct input_dev *input = dev->input; + int i; + + for (i = 0; i < bdev->pdata->nbuttons; i++) { + struct gpio_button *button = &pdata->buttons[i]; + unsigned int type = button->type ?: EV_KEY; + int state; + + state = gpio_get_value(button->gpio) ? 1 : 0; + state ^= button->active_low; + + if (state) { + button->count++; + } else { + if (button->count >= button->threshold) { + input_event(input, type, button->code, 1); + input_sync(input); + } + button->count = 0; + } + + if (button->count == button->threshold) { + input_event(input, type, button->code, 0); + input_sync(input); + } + } +} + +static int __devinit gpio_buttons_probe(struct platform_device *pdev) +{ + struct gpio_buttons_platform_data *pdata = pdev->dev.platform_data; + struct gpio_buttons_dev *bdev; + struct input_polled_dev *poll_dev; + struct input_dev *input; + int error, i; + + + if (!pdata) + return -ENXIO; + + bdev = kzalloc(sizeof(*bdev), GFP_KERNEL); + if (!bdev) { + printk(KERN_ERR DRV_NAME "no memory for device\n"); + return -ENOMEM; + } + + poll_dev = input_allocate_polled_device(); + if (!poll_dev) { + printk(KERN_ERR DRV_NAME "no memory for polled device\n"); + error = -ENOMEM; + goto err_free_bdev; + } + + poll_dev->private = bdev; + poll_dev->poll = gpio_buttons_poll; + poll_dev->poll_interval = pdata->poll_interval; + + input = poll_dev->input; + + input->evbit[0] = BIT(EV_KEY); + input->name = pdev->name; + input->phys = "gpio-buttons/input0"; + input->dev.parent = &pdev->dev; + + input->id.bustype = BUS_HOST; + input->id.vendor = 0x0001; + input->id.product = 0x0001; + input->id.version = 0x0100; + + for (i = 0; i < pdata->nbuttons; i++) { + struct gpio_button *button = &pdata->buttons[i]; + unsigned int gpio = button->gpio; + unsigned int type = button->type ?: EV_KEY; + + error = gpio_request(gpio, button->desc ? + button->desc : DRV_NAME); + if (error) { + printk(KERN_ERR PFX "unable to claim gpio %u, " + "error %d\n", gpio, error); + goto err_free_gpio; + } + + error = gpio_direction_input(gpio); + if (error) { + printk(KERN_ERR PFX "unable to set direction on " + "gpio %u, error %d\n", gpio, error); + goto err_free_gpio; + } + + input_set_capability(input, type, button->code); + button->count = 0; + } + + bdev->poll_dev = poll_dev; + bdev->pdata = pdata; + platform_set_drvdata(pdev, bdev); + + error = input_register_polled_device(poll_dev); + if (error) { + printk(KERN_ERR PFX "unable to register polled device, " + "error %d\n", error); + goto err_free_gpio; + } + + return 0; + +err_free_gpio: + for (i = i - 1; i >= 0; i--) + gpio_free(pdata->buttons[i].gpio); + + input_free_polled_device(poll_dev); + +err_free_bdev: + kfree(bdev); + + platform_set_drvdata(pdev, NULL); + return error; +} + +static int __devexit gpio_buttons_remove(struct platform_device *pdev) +{ + struct gpio_buttons_dev *bdev = platform_get_drvdata(pdev); + struct gpio_buttons_platform_data *pdata = bdev->pdata; + int i; + + input_unregister_polled_device(bdev->poll_dev); + + for (i = 0; i < pdata->nbuttons; i++) + gpio_free(pdata->buttons[i].gpio); + + input_free_polled_device(bdev->poll_dev); + + kfree(bdev); + platform_set_drvdata(pdev, NULL); + + return 0; +} + +static struct platform_driver gpio_buttons_driver = { + .probe = gpio_buttons_probe, + .remove = __devexit_p(gpio_buttons_remove), + .driver = { + .name = DRV_NAME, + .owner = THIS_MODULE, + }, +}; + +static int __init gpio_buttons_init(void) +{ + printk(KERN_INFO DRV_NAME " driver version " DRV_VERSION "\n"); + return platform_driver_register(&gpio_buttons_driver); +} + +static void __exit gpio_buttons_exit(void) +{ + platform_driver_unregister(&gpio_buttons_driver); +} + +module_init(gpio_buttons_init); +module_exit(gpio_buttons_exit); + +MODULE_LICENSE("GPL"); +MODULE_AUTHOR("Gabor Juhos "); +MODULE_VERSION(DRV_VERSION); +MODULE_DESCRIPTION("Polled buttons driver for CPU GPIOs"); + diff --git a/target/linux/generic-2.6/files-2.6.23/drivers/leds/leds-alix.c b/target/linux/generic-2.6/files-2.6.23/drivers/leds/leds-alix.c new file mode 100644 index 0000000000..103ca7dfa4 --- /dev/null +++ b/target/linux/generic-2.6/files-2.6.23/drivers/leds/leds-alix.c @@ -0,0 +1,172 @@ +/* + * LEDs driver for PCEngines ALIX 2/3 series + * + * Copyright (C) 2007 Petr Liebman + * + * Based on leds-wrap.c + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include +#include +#include +#include +#include +#include + +#define DRVNAME "alix-led" + +#define ALIX_LED1_PORT (0x6100) +#define ALIX_LED1_ON (1<<22) +#define ALIX_LED1_OFF (1<<6) + +#define ALIX_LED2_PORT (0x6180) +#define ALIX_LED2_ON (1<<25) +#define ALIX_LED2_OFF (1<<9) + +#define ALIX_LED3_PORT (0x6180) +#define ALIX_LED3_ON (1<<27) +#define ALIX_LED3_OFF (1<<11) + + +static struct platform_device *pdev; + +static void alix_led_set_1(struct led_classdev *led_cdev, + enum led_brightness value) +{ + if (value) + outl(ALIX_LED1_ON, ALIX_LED1_PORT); + else + outl(ALIX_LED1_OFF, ALIX_LED1_PORT); +} + +static void alix_led_set_2(struct led_classdev *led_cdev, + enum led_brightness value) +{ + if (value) + outl(ALIX_LED2_ON, ALIX_LED2_PORT); + else + outl(ALIX_LED2_OFF, ALIX_LED2_PORT); +} + +static void alix_led_set_3(struct led_classdev *led_cdev, + enum led_brightness value) +{ + if (value) + outl(ALIX_LED3_ON, ALIX_LED3_PORT); + else + outl(ALIX_LED3_OFF, ALIX_LED3_PORT); +} + +static struct led_classdev alix_led_1 = { + .name = "alix:1", + .brightness_set = alix_led_set_1, +}; + +static struct led_classdev alix_led_2 = { + .name = "alix:2", + .brightness_set = alix_led_set_2, +}; + +static struct led_classdev alix_led_3 = { + .name = "alix:3", + .brightness_set = alix_led_set_3, +}; + + +#ifdef CONFIG_PM +static int alix_led_suspend(struct platform_device *dev, + pm_message_t state) +{ + led_classdev_suspend(&alix_led_1); + led_classdev_suspend(&alix_led_2); + led_classdev_suspend(&alix_led_3); + return 0; +} + +static int alix_led_resume(struct platform_device *dev) +{ + led_classdev_resume(&alix_led_1); + led_classdev_resume(&alix_led_2); + led_classdev_resume(&alix_led_3); + return 0; +} +#else +#define alix_led_suspend NULL +#define alix_led_resume NULL +#endif + +static int alix_led_probe(struct platform_device *pdev) +{ + int ret; + + ret = led_classdev_register(&pdev->dev, &alix_led_1); + if (ret >= 0) + { + ret = led_classdev_register(&pdev->dev, &alix_led_2); + if (ret >= 0) + { + ret = led_classdev_register(&pdev->dev, &alix_led_3); + if (ret < 0) + led_classdev_unregister(&alix_led_2); + } + if (ret < 0) + led_classdev_unregister(&alix_led_1); + } + return ret; +} + +static int alix_led_remove(struct platform_device *pdev) +{ + led_classdev_unregister(&alix_led_1); + led_classdev_unregister(&alix_led_2); + led_classdev_unregister(&alix_led_3); + return 0; +} + +static struct platform_driver alix_led_driver = { + .probe = alix_led_probe, + .remove = alix_led_remove, + .suspend = alix_led_suspend, + .resume = alix_led_resume, + .driver = { + .name = DRVNAME, + .owner = THIS_MODULE, + }, +}; + +static int __init alix_led_init(void) +{ + int ret; + + ret = platform_driver_register(&alix_led_driver); + if (ret < 0) + goto out; + + pdev = platform_device_register_simple(DRVNAME, -1, NULL, 0); + if (IS_ERR(pdev)) { + ret = PTR_ERR(pdev); + platform_driver_unregister(&alix_led_driver); + goto out; + } + +out: + return ret; +} + +static void __exit alix_led_exit(void) +{ + platform_device_unregister(pdev); + platform_driver_unregister(&alix_led_driver); +} + +module_init(alix_led_init); +module_exit(alix_led_exit); + +MODULE_AUTHOR("Petr Liebman"); +MODULE_DESCRIPTION("PCEngines ALIX LED driver"); +MODULE_LICENSE("GPL"); + diff --git a/target/linux/generic-2.6/files-2.6.23/drivers/leds/ledtrig-default-on.c b/target/linux/generic-2.6/files-2.6.23/drivers/leds/ledtrig-default-on.c new file mode 100644 index 0000000000..92995e40cf --- /dev/null +++ b/target/linux/generic-2.6/files-2.6.23/drivers/leds/ledtrig-default-on.c @@ -0,0 +1,45 @@ +/* + * LED Kernel Default ON Trigger + * + * Copyright 2008 Nick Forbes + * + * Based on Richard Purdie's ledtrig-timer.c. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + */ + +#include +#include +#include +#include +#include "leds.h" + +static void defon_trig_activate(struct led_classdev *led_cdev) +{ + led_set_brightness(led_cdev, LED_FULL); +} + +static struct led_trigger defon_led_trigger = { + .name = "default-on", + .activate = defon_trig_activate, +}; + +static int __init defon_trig_init(void) +{ + return led_trigger_register(&defon_led_trigger); +} + +static void __exit defon_trig_exit(void) +{ + led_trigger_unregister(&defon_led_trigger); +} + +module_init(defon_trig_init); +module_exit(defon_trig_exit); + +MODULE_AUTHOR("Nick Forbes "); +MODULE_DESCRIPTION("Default-ON LED trigger"); +MODULE_LICENSE("GPL"); diff --git a/target/linux/generic-2.6/files-2.6.23/drivers/leds/ledtrig-morse.c b/target/linux/generic-2.6/files-2.6.23/drivers/leds/ledtrig-morse.c new file mode 100644 index 0000000000..cb47480a36 --- /dev/null +++ b/target/linux/generic-2.6/files-2.6.23/drivers/leds/ledtrig-morse.c @@ -0,0 +1,365 @@ +/* + * LED Morse Trigger + * + * Copyright (C) 2007 Gabor Juhos + * + * This file was based on: drivers/led/ledtrig-timer.c + * Copyright 2005-2006 Openedhand Ltd. + * Author: Richard Purdie + * + * also based on the patch '[PATCH] 2.5.59 morse code panics' posted + * in the LKML by Tomas Szepe at Thu, 30 Jan 2003 + * Copyright (C) 2002 Andrew Rodland + * Copyright (C) 2003 Tomas Szepe + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + * + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include "leds.h" + +#define MORSE_DELAY_BASE (HZ/2) + +#define MORSE_STATE_BLINK_START 0 +#define MORSE_STATE_BLINK_STOP 1 + +#define MORSE_DIT_LEN 1 +#define MORSE_DAH_LEN 3 +#define MORSE_SPACE_LEN 7 + +struct morse_trig_data { + unsigned long delay; + char *msg; + + unsigned char morse; + unsigned char state; + char *msgpos; + struct timer_list timer; +}; + +const unsigned char morsetable[] = { + 0122, 0, 0310, 0, 0, 0163, /* "#$%&' */ + 055, 0155, 0, 0, 0163, 0141, 0152, 0051, /* ()*+,-./ */ + 077, 076, 074, 070, 060, 040, 041, 043, 047, 057, /* 0-9 */ + 0107, 0125, 0, 0061, 0, 0114, 0, /* :;<=>?@ */ + 006, 021, 025, 011, 002, 024, 013, 020, 004, /* A-I */ + 036, 015, 022, 007, 005, 017, 026, 033, 012, /* J-R */ + 010, 003, 014, 030, 016, 031, 035, 023, /* S-Z */ + 0, 0, 0, 0, 0154 /* [\]^_ */ +}; + +static inline unsigned char tomorse(char c) { + if (c >= 'a' && c <= 'z') + c = c - 'a' + 'A'; + if (c >= '"' && c <= '_') { + return morsetable[c - '"']; + } else + return 0; +} + +static inline unsigned long dit_len(struct morse_trig_data *morse_data) +{ + return MORSE_DIT_LEN*morse_data->delay; +} + +static inline unsigned long dah_len(struct morse_trig_data *morse_data) +{ + return MORSE_DAH_LEN*morse_data->delay; +} + +static inline unsigned long space_len(struct morse_trig_data *morse_data) +{ + return MORSE_SPACE_LEN*morse_data->delay; +} + +static void morse_timer_function(unsigned long data) +{ + struct led_classdev *led_cdev = (struct led_classdev *)data; + struct morse_trig_data *morse_data = led_cdev->trigger_data; + unsigned long brightness = LED_OFF; + unsigned long delay = 0; + + if (!morse_data->msg) + goto set_led; + + switch (morse_data->state) { + case MORSE_STATE_BLINK_START: + /* Starting a new blink. We have a valid code in morse. */ + delay = (morse_data->morse & 001) ? dah_len(morse_data): + dit_len(morse_data); + brightness = LED_FULL; + morse_data->state = MORSE_STATE_BLINK_STOP; + morse_data->morse >>= 1; + break; + case MORSE_STATE_BLINK_STOP: + /* Coming off of a blink. */ + morse_data->state = MORSE_STATE_BLINK_START; + + if (morse_data->morse > 1) { + /* Not done yet, just a one-dit pause. */ + delay = dit_len(morse_data); + break; + } + + /* Get a new char, figure out how much space. */ + /* First time through */ + if (!morse_data->msgpos) + morse_data->msgpos = (char *)morse_data->msg; + + if (!*morse_data->msgpos) { + /* Repeating */ + morse_data->msgpos = (char *)morse_data->msg; + delay = space_len(morse_data); + } else { + /* Inter-letter space */ + delay = dah_len(morse_data); + } + + if (!(morse_data->morse = tomorse(*morse_data->msgpos))) { + delay = space_len(morse_data); + /* And get us back here */ + morse_data->state = MORSE_STATE_BLINK_STOP; + } + morse_data->msgpos++; + break; + } + + mod_timer(&morse_data->timer, jiffies + msecs_to_jiffies(delay)); + +set_led: + led_set_brightness(led_cdev, brightness); +} + +static ssize_t _morse_delay_show(struct led_classdev *led_cdev, char *buf) +{ + struct morse_trig_data *morse_data = led_cdev->trigger_data; + + sprintf(buf, "%lu\n", morse_data->delay); + + return strlen(buf) + 1; +} + +static ssize_t _morse_delay_store(struct led_classdev *led_cdev, + const char *buf, size_t size) +{ + struct morse_trig_data *morse_data = led_cdev->trigger_data; + char *after; + unsigned long state = simple_strtoul(buf, &after, 10); + size_t count = after - buf; + int ret = -EINVAL; + + if (*after && isspace(*after)) + count++; + + if (count == size) { + morse_data->delay = state; + mod_timer(&morse_data->timer, jiffies + 1); + ret = count; + } + + return ret; +} + +static ssize_t _morse_msg_show(struct led_classdev *led_cdev, char *buf) +{ + struct morse_trig_data *morse_data = led_cdev->trigger_data; + + if (!morse_data->msg) + sprintf(buf, "\n"); + else + sprintf(buf, "%s\n", morse_data->msg); + + return strlen(buf) + 1; +} + +static ssize_t _morse_msg_store(struct led_classdev *led_cdev, + const char *buf, size_t size) +{ + struct morse_trig_data *morse_data = led_cdev->trigger_data; + char *m; + + m = kmalloc(size, GFP_KERNEL); + if (!m) + return -ENOMEM; + + memcpy(m,buf,size); + m[size]='\0'; + + if (morse_data->msg) + kfree(morse_data->msg); + + morse_data->msg = m; + morse_data->msgpos = NULL; + morse_data->state = MORSE_STATE_BLINK_STOP; + + mod_timer(&morse_data->timer, jiffies + 1); + + return size; +} + +#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,23) +static ssize_t morse_delay_show(struct device *dev, + struct device_attribute *attr, char *buf) +{ + struct led_classdev *led_cdev = dev_get_drvdata(dev); + + return _morse_delay_show(led_cdev, buf); +} + +static ssize_t morse_delay_store(struct device *dev, + struct device_attribute *attr, const char *buf, size_t size) +{ + struct led_classdev *led_cdev = dev_get_drvdata(dev); + + return _morse_delay_store(led_cdev, buf, size); +} + +static ssize_t morse_msg_show(struct device *dev, + struct device_attribute *attr, char *buf) +{ + struct led_classdev *led_cdev = dev_get_drvdata(dev); + + return _morse_msg_show(led_cdev, buf); +} + +static ssize_t morse_msg_store(struct device *dev, + struct device_attribute *attr, const char *buf, size_t size) +{ + struct led_classdev *led_cdev = dev_get_drvdata(dev); + + return _morse_msg_store(led_cdev, buf, size); +} + +static DEVICE_ATTR(delay, 0644, morse_delay_show, morse_delay_store); +static DEVICE_ATTR(message, 0644, morse_msg_show, morse_msg_store); + +#define led_device_create_file(leddev, attr) \ + device_create_file(leddev->dev, &dev_attr_ ## attr) +#define led_device_remove_file(leddev, attr) \ + device_remove_file(leddev->dev, &dev_attr_ ## attr) + +#else +static ssize_t morse_delay_show(struct class_device *dev, char *buf) +{ + struct led_classdev *led_cdev = class_get_devdata(dev); + + return _morse_delay_show(led_cdev, buf); +} + +static ssize_t morse_delay_store(struct class_device *dev, const char *buf, + size_t size) +{ + struct led_classdev *led_cdev = class_get_devdata(dev); + + return _morse_delay_store(led_cdev, buf, size); +} + +static ssize_t morse_msg_show(struct class_device *dev, char *buf) +{ + struct led_classdev *led_cdev = class_get_devdata(dev); + + return _morse_msg_show(led_cdev, buf); +} + +static ssize_t morse_msg_store(struct class_device *dev, const char *buf, + size_t size) +{ + struct led_classdev *led_cdev = class_get_devdata(dev); + + return _morse_msg_store(led_cdev, buf, size); +} + +static CLASS_DEVICE_ATTR(delay, 0644, morse_delay_show, morse_delay_store); +static CLASS_DEVICE_ATTR(message, 0644, morse_msg_show, morse_msg_store); + +#define led_device_create_file(leddev, attr) \ + class_device_create_file(leddev->class_dev, &class_device_attr_ ## attr) +#define led_device_remove_file(leddev, attr) \ + class_device_remove_file(leddev->class_dev, &class_device_attr_ ## attr) + +#endif + +static void morse_trig_activate(struct led_classdev *led_cdev) +{ + struct morse_trig_data *morse_data; + int rc; + + morse_data = kzalloc(sizeof(*morse_data), GFP_KERNEL); + if (!morse_data) + return; + + morse_data->delay = MORSE_DELAY_BASE; + init_timer(&morse_data->timer); + morse_data->timer.function = morse_timer_function; + morse_data->timer.data = (unsigned long)led_cdev; + + rc = led_device_create_file(led_cdev, delay); + if (rc) goto err; + + rc = led_device_create_file(led_cdev, message); + if (rc) goto err_delay; + + led_cdev->trigger_data = morse_data; + + return; + +err_delay: + led_device_remove_file(led_cdev, delay); +err: + kfree(morse_data); +} + +static void morse_trig_deactivate(struct led_classdev *led_cdev) +{ + struct morse_trig_data *morse_data = led_cdev->trigger_data; + + if (!morse_data) + return; + + led_device_remove_file(led_cdev, message); + led_device_remove_file(led_cdev, delay); + + del_timer_sync(&morse_data->timer); + if (morse_data->msg) + kfree(morse_data->msg); + + kfree(morse_data); +} + +static struct led_trigger morse_led_trigger = { + .name = "morse", + .activate = morse_trig_activate, + .deactivate = morse_trig_deactivate, +}; + +static int __init morse_trig_init(void) +{ + return led_trigger_register(&morse_led_trigger); +} + +static void __exit morse_trig_exit(void) +{ + led_trigger_unregister(&morse_led_trigger); +} + +module_init(morse_trig_init); +module_exit(morse_trig_exit); + +MODULE_AUTHOR("Gabor Juhos "); +MODULE_DESCRIPTION("Morse LED trigger"); +MODULE_LICENSE("GPL"); diff --git a/target/linux/generic-2.6/files-2.6.23/drivers/leds/ledtrig-netdev.c b/target/linux/generic-2.6/files-2.6.23/drivers/leds/ledtrig-netdev.c new file mode 100644 index 0000000000..fac3571bdd --- /dev/null +++ b/target/linux/generic-2.6/files-2.6.23/drivers/leds/ledtrig-netdev.c @@ -0,0 +1,451 @@ +/* + * LED Kernel Netdev Trigger + * + * Toggles the LED to reflect the link and traffic state of a named net device + * + * Copyright 2007 Oliver Jowett + * + * Derived from ledtrig-timer.c which is: + * Copyright 2005-2006 Openedhand Ltd. + * Author: Richard Purdie + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,26) +#include +#endif + +#include "leds.h" + +/* + * Configurable sysfs attributes: + * + * device_name - network device name to monitor + * + * interval - duration of LED blink, in milliseconds + * + * mode - either "none" (LED is off) or a space separated list of one or more of: + * link: LED's normal state reflects whether the link is up (has carrier) or not + * tx: LED blinks on transmitted data + * rx: LED blinks on receive data + * + * Some suggestions: + * + * Simple link status LED: + * $ echo netdev >someled/trigger + * $ echo eth0 >someled/device_name + * $ echo link >someled/mode + * + * Ethernet-style link/activity LED: + * $ echo netdev >someled/trigger + * $ echo eth0 >someled/device_name + * $ echo "link tx rx" >someled/mode + * + * Modem-style tx/rx LEDs: + * $ echo netdev >led1/trigger + * $ echo ppp0 >led1/device_name + * $ echo tx >led1/mode + * $ echo netdev >led2/trigger + * $ echo ppp0 >led2/device_name + * $ echo rx >led2/mode + * + */ + +#define MODE_LINK 1 +#define MODE_TX 2 +#define MODE_RX 4 + +struct led_netdev_data { + rwlock_t lock; + + struct timer_list timer; + struct notifier_block notifier; + + struct led_classdev *led_cdev; + struct net_device *net_dev; + + char device_name[IFNAMSIZ]; + unsigned interval; + unsigned mode; + unsigned link_up; + unsigned last_activity; +}; + +static void set_baseline_state(struct led_netdev_data *trigger_data) +{ + if ((trigger_data->mode & MODE_LINK) != 0 && trigger_data->link_up) + led_set_brightness(trigger_data->led_cdev, LED_FULL); + else + led_set_brightness(trigger_data->led_cdev, LED_OFF); + + if ((trigger_data->mode & (MODE_TX | MODE_RX)) != 0 && trigger_data->link_up) + mod_timer(&trigger_data->timer, jiffies + trigger_data->interval); + else + del_timer(&trigger_data->timer); +} + +static ssize_t led_device_name_show(struct device *dev, + struct device_attribute *attr, char *buf) +{ + struct led_classdev *led_cdev = dev_get_drvdata(dev); + struct led_netdev_data *trigger_data = led_cdev->trigger_data; + + read_lock(&trigger_data->lock); + sprintf(buf, "%s\n", trigger_data->device_name); + read_unlock(&trigger_data->lock); + + return strlen(buf) + 1; +} + +#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,21) +extern struct net init_net; +#endif + +static ssize_t led_device_name_store(struct device *dev, + struct device_attribute *attr, const char *buf, size_t size) +{ + struct led_classdev *led_cdev = dev_get_drvdata(dev); + struct led_netdev_data *trigger_data = led_cdev->trigger_data; + + if (size < 0 || size >= IFNAMSIZ) + return -EINVAL; + + write_lock(&trigger_data->lock); + + strcpy(trigger_data->device_name, buf); + if (size > 0 && trigger_data->device_name[size-1] == '\n') + trigger_data->device_name[size-1] = 0; + + if (trigger_data->device_name[0] != 0) { + /* check for existing device to update from */ +#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,26) + trigger_data->net_dev = dev_get_by_name(&init_net, trigger_data->device_name); +#else + trigger_data->net_dev = dev_get_by_name(trigger_data->device_name); +#endif + if (trigger_data->net_dev != NULL) + trigger_data->link_up = (dev_get_flags(trigger_data->net_dev) & IFF_LOWER_UP) != 0; + set_baseline_state(trigger_data); /* updates LEDs, may start timers */ + } + + write_unlock(&trigger_data->lock); + return size; +} + +static DEVICE_ATTR(device_name, 0644, led_device_name_show, led_device_name_store); + +static ssize_t led_mode_show(struct device *dev, + struct device_attribute *attr, char *buf) +{ + struct led_classdev *led_cdev = dev_get_drvdata(dev); + struct led_netdev_data *trigger_data = led_cdev->trigger_data; + + read_lock(&trigger_data->lock); + + if (trigger_data->mode == 0) { + strcpy(buf, "none\n"); + } else { + if (trigger_data->mode & MODE_LINK) + strcat(buf, "link "); + if (trigger_data->mode & MODE_TX) + strcat(buf, "tx "); + if (trigger_data->mode & MODE_RX) + strcat(buf, "rx "); + strcat(buf, "\n"); + } + + read_unlock(&trigger_data->lock); + + return strlen(buf)+1; +} + +static ssize_t led_mode_store(struct device *dev, + struct device_attribute *attr, const char *buf, size_t size) +{ + struct led_classdev *led_cdev = dev_get_drvdata(dev); + struct led_netdev_data *trigger_data = led_cdev->trigger_data; + char copybuf[1024]; + int new_mode = -1; + char *p, *token; + + /* take a copy since we don't want to trash the inbound buffer when using strsep */ + strncpy(copybuf, buf, sizeof(copybuf)); + copybuf[1023] = 0; + p = copybuf; + + while ((token = strsep(&p, " \t\n")) != NULL) { + if (!*token) + continue; + + if (new_mode == -1) + new_mode = 0; + + if (!strcmp(token, "none")) + new_mode = 0; + else if (!strcmp(token, "tx")) + new_mode |= MODE_TX; + else if (!strcmp(token, "rx")) + new_mode |= MODE_RX; + else if (!strcmp(token, "link")) + new_mode |= MODE_LINK; + else + return -EINVAL; + } + + if (new_mode == -1) + return -EINVAL; + + write_lock(&trigger_data->lock); + trigger_data->mode = new_mode; + set_baseline_state(trigger_data); + write_unlock(&trigger_data->lock); + + return size; +} + +static DEVICE_ATTR(mode, 0644, led_mode_show, led_mode_store); + +static ssize_t led_interval_show(struct device *dev, + struct device_attribute *attr, char *buf) +{ + struct led_classdev *led_cdev = dev_get_drvdata(dev); + struct led_netdev_data *trigger_data = led_cdev->trigger_data; + + read_lock(&trigger_data->lock); + sprintf(buf, "%u\n", jiffies_to_msecs(trigger_data->interval)); + read_unlock(&trigger_data->lock); + + return strlen(buf) + 1; +} + +static ssize_t led_interval_store(struct device *dev, + struct device_attribute *attr, const char *buf, size_t size) +{ + struct led_classdev *led_cdev = dev_get_drvdata(dev); + struct led_netdev_data *trigger_data = led_cdev->trigger_data; + int ret = -EINVAL; + char *after; + unsigned long value = simple_strtoul(buf, &after, 10); + size_t count = after - buf; + + if (*after && isspace(*after)) + count++; + + /* impose some basic bounds on the timer interval */ + if (count == size && value >= 5 && value <= 10000) { + write_lock(&trigger_data->lock); + trigger_data->interval = msecs_to_jiffies(value); + set_baseline_state(trigger_data); // resets timer + write_unlock(&trigger_data->lock); + ret = count; + } + + return ret; +} + +static DEVICE_ATTR(interval, 0644, led_interval_show, led_interval_store); + +static int netdev_trig_notify(struct notifier_block *nb, + unsigned long evt, + void *dv) +{ + struct net_device *dev = dv; + struct led_netdev_data *trigger_data = container_of(nb, struct led_netdev_data, notifier); + + if (evt != NETDEV_UP && evt != NETDEV_DOWN && evt != NETDEV_CHANGE && evt != NETDEV_REGISTER && evt != NETDEV_UNREGISTER) + return NOTIFY_DONE; + + write_lock(&trigger_data->lock); + + if (strcmp(dev->name, trigger_data->device_name)) + goto done; + + if (evt == NETDEV_REGISTER) { + if (trigger_data->net_dev != NULL) + dev_put(trigger_data->net_dev); + dev_hold(dev); + trigger_data->net_dev = dev; + trigger_data->link_up = 0; + goto done; + } + + if (evt == NETDEV_UNREGISTER && trigger_data->net_dev != NULL) { + dev_put(trigger_data->net_dev); + trigger_data->net_dev = NULL; + goto done; + } + + /* UP / DOWN / CHANGE */ + + trigger_data->link_up = (evt != NETDEV_DOWN && netif_carrier_ok(dev)); + set_baseline_state(trigger_data); + +done: + write_unlock(&trigger_data->lock); + return NOTIFY_DONE; +} + +/* here's the real work! */ +static void netdev_trig_timer(unsigned long arg) +{ + struct led_netdev_data *trigger_data = (struct led_netdev_data *)arg; + struct net_device_stats *dev_stats; + unsigned new_activity; + + write_lock(&trigger_data->lock); + + if (!trigger_data->link_up || !trigger_data->net_dev || (trigger_data->mode & (MODE_TX | MODE_RX)) == 0) { + /* we don't need to do timer work, just reflect link state. */ + led_set_brightness(trigger_data->led_cdev, ((trigger_data->mode & MODE_LINK) != 0 && trigger_data->link_up) ? LED_FULL : LED_OFF); + goto no_restart; + } + + dev_stats = trigger_data->net_dev->get_stats(trigger_data->net_dev); + new_activity = + ((trigger_data->mode & MODE_TX) ? dev_stats->tx_packets : 0) + + ((trigger_data->mode & MODE_RX) ? dev_stats->rx_packets : 0); + + if (trigger_data->mode & MODE_LINK) { + /* base state is ON (link present) */ + /* if there's no link, we don't get this far and the LED is off */ + + /* OFF -> ON always */ + /* ON -> OFF on activity */ + if (trigger_data->led_cdev->brightness == LED_OFF) { + led_set_brightness(trigger_data->led_cdev, LED_FULL); + } else if (trigger_data->last_activity != new_activity) { + led_set_brightness(trigger_data->led_cdev, LED_OFF); + } + } else { + /* base state is OFF */ + /* ON -> OFF always */ + /* OFF -> ON on activity */ + if (trigger_data->led_cdev->brightness == LED_FULL) { + led_set_brightness(trigger_data->led_cdev, LED_OFF); + } else if (trigger_data->last_activity != new_activity) { + led_set_brightness(trigger_data->led_cdev, LED_FULL); + } + } + + trigger_data->last_activity = new_activity; + mod_timer(&trigger_data->timer, jiffies + trigger_data->interval); + +no_restart: + write_unlock(&trigger_data->lock); +} + +static void netdev_trig_activate(struct led_classdev *led_cdev) +{ + struct led_netdev_data *trigger_data; + int rc; + + trigger_data = kzalloc(sizeof(struct led_netdev_data), GFP_KERNEL); + if (!trigger_data) + return; + + rwlock_init(&trigger_data->lock); + + trigger_data->notifier.notifier_call = netdev_trig_notify; + trigger_data->notifier.priority = 10; + + setup_timer(&trigger_data->timer, netdev_trig_timer, (unsigned long) trigger_data); + + trigger_data->led_cdev = led_cdev; + trigger_data->net_dev = NULL; + trigger_data->device_name[0] = 0; + + trigger_data->mode = 0; + trigger_data->interval = msecs_to_jiffies(50); + trigger_data->link_up = 0; + trigger_data->last_activity = 0; + + led_cdev->trigger_data = trigger_data; + + rc = device_create_file(led_cdev->dev, &dev_attr_device_name); + if (rc) + goto err_out; + rc = device_create_file(led_cdev->dev, &dev_attr_mode); + if (rc) + goto err_out_device_name; + rc = device_create_file(led_cdev->dev, &dev_attr_interval); + if (rc) + goto err_out_mode; + + register_netdevice_notifier(&trigger_data->notifier); + return; + +err_out_mode: + device_remove_file(led_cdev->dev, &dev_attr_mode); +err_out_device_name: + device_remove_file(led_cdev->dev, &dev_attr_device_name); +err_out: + led_cdev->trigger_data = NULL; + kfree(trigger_data); +} + +static void netdev_trig_deactivate(struct led_classdev *led_cdev) +{ + struct led_netdev_data *trigger_data = led_cdev->trigger_data; + + if (trigger_data) { + unregister_netdevice_notifier(&trigger_data->notifier); + + device_remove_file(led_cdev->dev, &dev_attr_device_name); + device_remove_file(led_cdev->dev, &dev_attr_mode); + device_remove_file(led_cdev->dev, &dev_attr_interval); + + write_lock(&trigger_data->lock); + + if (trigger_data->net_dev) { + dev_put(trigger_data->net_dev); + trigger_data->net_dev = NULL; + } + + write_unlock(&trigger_data->lock); + + del_timer_sync(&trigger_data->timer); + + kfree(trigger_data); + } +} + +static struct led_trigger netdev_led_trigger = { + .name = "netdev", + .activate = netdev_trig_activate, + .deactivate = netdev_trig_deactivate, +}; + +static int __init netdev_trig_init(void) +{ + return led_trigger_register(&netdev_led_trigger); +} + +static void __exit netdev_trig_exit(void) +{ + led_trigger_unregister(&netdev_led_trigger); +} + +module_init(netdev_trig_init); +module_exit(netdev_trig_exit); + +MODULE_AUTHOR("Oliver Jowett "); +MODULE_DESCRIPTION("Netdev LED trigger"); +MODULE_LICENSE("GPL"); diff --git a/target/linux/generic-2.6/files-2.6.23/drivers/net/phy/adm6996.c b/target/linux/generic-2.6/files-2.6.23/drivers/net/phy/adm6996.c new file mode 100644 index 0000000000..3033813ec0 --- /dev/null +++ b/target/linux/generic-2.6/files-2.6.23/drivers/net/phy/adm6996.c @@ -0,0 +1,170 @@ +/* + * ADM6996 switch driver + * + * Copyright (c) 2008 Felix Fietkau + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License v2 as published by the + * Free Software Foundation + */ +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include +#include +#include +#include "adm6996.h" + +MODULE_DESCRIPTION("Infineon ADM6996 Switch"); +MODULE_AUTHOR("Felix Fietkau"); +MODULE_LICENSE("GPL"); + +struct adm6996_priv { + /* use abstraction for regops, we want to add gpio support in the future */ + u16 (*read)(struct phy_device *phydev, enum admreg reg); + void (*write)(struct phy_device *phydev, enum admreg reg, u16 val); +}; + +#define to_adm(_phy) ((struct adm6996_priv *) (_phy)->priv) + + +static inline u16 +r16(struct phy_device *pdev, enum admreg reg) +{ + return to_adm(pdev)->read(pdev, reg); +} + +static inline void +w16(struct phy_device *pdev, enum admreg reg, u16 val) +{ + to_adm(pdev)->write(pdev, reg, val); +} + + +static u16 +adm6996_read_mii_reg(struct phy_device *phydev, enum admreg reg) +{ + return phydev->bus->read(phydev->bus, PHYADDR(reg)); +} + +static void +adm6996_write_mii_reg(struct phy_device *phydev, enum admreg reg, u16 val) +{ + phydev->bus->write(phydev->bus, PHYADDR(reg), val); +} + + +static int adm6996_config_init(struct phy_device *pdev) +{ + int i; + + printk("%s: ADM6996 PHY driver attached.\n", pdev->attached_dev->name); + pdev->supported = ADVERTISED_100baseT_Full; + pdev->advertising = ADVERTISED_100baseT_Full; + + /* initialize port and vlan settings */ + for (i = 0; i < ADM_PHY_PORTS; i++) { + w16(pdev, adm_portcfg[i], ADM_PORTCFG_INIT | + ADM_PORTCFG_PVID((i == ADM_WAN_PORT) ? 1 : 0)); + } + w16(pdev, adm_portcfg[5], ADM_PORTCFG_CPU); + + /* reset all ports */ + for (i = 0; i < ADM_PHY_PORTS; i++) { + w16(pdev, ADM_PHY_PORT(i), ADM_PHYCFG_INIT); + } + + return 0; +} + +static int adm6996_read_status(struct phy_device *phydev) +{ + phydev->speed = SPEED_100; + phydev->duplex = DUPLEX_FULL; + phydev->state = PHY_UP; + return 0; +} + +static int adm6996_config_aneg(struct phy_device *phydev) +{ + return 0; +} + +static int adm6996_probe(struct phy_device *pdev) +{ + struct adm6996_priv *priv; + + priv = kzalloc(sizeof(struct adm6996_priv), GFP_KERNEL); + if (priv == NULL) + return -ENOMEM; + + priv->read = adm6996_read_mii_reg; + priv->write = adm6996_write_mii_reg; + pdev->priv = priv; + return 0; +} + +static void adm6996_remove(struct phy_device *pdev) +{ + kfree(pdev->priv); +} + +static bool adm6996_detect(struct mii_bus *bus, int addr) +{ + u16 reg; + + /* we only attach to phy id 0 */ + if (addr != 0) + return false; + + /* look for the switch on the bus */ + reg = bus->read(bus, PHYADDR(ADM_SIG0)) & ADM_SIG0_MASK; + if (reg != ADM_SIG0_VAL) + return false; + + reg = bus->read(bus, PHYADDR(ADM_SIG1)) & ADM_SIG1_MASK; + if (reg != ADM_SIG1_VAL) + return false; + + return true; +} + +static struct phy_driver adm6996_driver = { + .name = "Infineon ADM6996", + .features = PHY_BASIC_FEATURES, + .detect = adm6996_detect, + .probe = adm6996_probe, + .remove = adm6996_remove, + .config_init = &adm6996_config_init, + .config_aneg = &adm6996_config_aneg, + .read_status = &adm6996_read_status, + .driver = { .owner = THIS_MODULE,}, +}; + +static int __init adm6996_init(void) +{ + return phy_driver_register(&adm6996_driver); +} + +static void __exit adm6996_exit(void) +{ + phy_driver_unregister(&adm6996_driver); +} + +module_init(adm6996_init); +module_exit(adm6996_exit); diff --git a/target/linux/generic-2.6/files-2.6.23/drivers/net/phy/adm6996.h b/target/linux/generic-2.6/files-2.6.23/drivers/net/phy/adm6996.h new file mode 100644 index 0000000000..e074901517 --- /dev/null +++ b/target/linux/generic-2.6/files-2.6.23/drivers/net/phy/adm6996.h @@ -0,0 +1,105 @@ +/* + * ADM6996 switch driver + * + * Copyright (c) 2008 Felix Fietkau + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License v2 as published by the + * Free Software Foundation + */ +#ifndef __ADM6996_H +#define __ADM6996_H + +#define ADM_PHY_PORTS 5 +#define ADM_CPU_PORT 5 +#define ADM_WAN_PORT 0 /* FIXME: dynamic ? */ + +enum admreg { + ADM_EEPROM_BASE = 0x0, + ADM_P0_CFG = ADM_EEPROM_BASE + 1, + ADM_P1_CFG = ADM_EEPROM_BASE + 3, + ADM_P2_CFG = ADM_EEPROM_BASE + 5, + ADM_P3_CFG = ADM_EEPROM_BASE + 7, + ADM_P4_CFG = ADM_EEPROM_BASE + 8, + ADM_P5_CFG = ADM_EEPROM_BASE + 9, + ADM_EEPROM_EXT_BASE = 0x40, + ADM_COUNTER_BASE = 0xa0, + ADM_SIG0 = ADM_COUNTER_BASE + 0, + ADM_SIG1 = ADM_COUNTER_BASE + 1, + ADM_PHY_BASE = 0x200, +#define ADM_PHY_PORT(n) (ADM_PHY_BASE + (0x20 * n)) +}; + +/* Chip identification patterns */ +#define ADM_SIG0_MASK 0xfff0 +#define ADM_SIG0_VAL 0x1020 +#define ADM_SIG1_MASK 0xffff +#define ADM_SIG1_VAL 0x0007 + +enum { + ADM_PHYCFG_COLTST = (1 << 7), /* Enable collision test */ + ADM_PHYCFG_DPLX = (1 << 8), /* Enable full duplex */ + ADM_PHYCFG_ANEN_RST = (1 << 9), /* Restart auto negotiation (self clear) */ + ADM_PHYCFG_ISO = (1 << 10), /* Isolate PHY */ + ADM_PHYCFG_PDN = (1 << 11), /* Power down PHY */ + ADM_PHYCFG_ANEN = (1 << 12), /* Enable auto negotiation */ + ADM_PHYCFG_SPEED_100 = (1 << 13), /* Enable 100 Mbit/s */ + ADM_PHYCFG_LPBK = (1 << 14), /* Enable loopback operation */ + ADM_PHYCFG_RST = (1 << 15), /* Reset the port (self clear) */ + ADM_PHYCFG_INIT = ( + ADM_PHYCFG_RST | + ADM_PHYCFG_SPEED_100 | + ADM_PHYCFG_ANEN | + ADM_PHYCFG_ANEN_RST + ) +}; + +enum { + ADM_PORTCFG_FC = (1 << 0), /* Enable 802.x flow control */ + ADM_PORTCFG_AN = (1 << 1), /* Enable auto-negotiation */ + ADM_PORTCFG_SPEED_100 = (1 << 2), /* Enable 100 Mbit/s */ + ADM_PORTCFG_DPLX = (1 << 3), /* Enable full duplex */ + ADM_PORTCFG_OT = (1 << 4), /* Output tagged packets */ + ADM_PORTCFG_PD = (1 << 5), /* Port disable */ + ADM_PORTCFG_TV_PRIO = (1 << 6), /* 0 = VLAN based priority + * 1 = TOS based priority */ + ADM_PORTCFG_PPE = (1 << 7), /* Port based priority enable */ + ADM_PORTCFG_PP_S = (1 << 8), /* Port based priority, 2 bits */ + ADM_PORTCFG_PVID_BASE = (1 << 10), /* Primary VLAN id, 4 bits */ + ADM_PORTCFG_FSE = (1 << 14), /* Fx select enable */ + ADM_PORTCFG_CAM = (1 << 15), /* Crossover Auto MDIX */ + + ADM_PORTCFG_INIT = ( + ADM_PORTCFG_FC | + ADM_PORTCFG_AN | + ADM_PORTCFG_SPEED_100 | + ADM_PORTCFG_DPLX | + ADM_PORTCFG_CAM + ), + ADM_PORTCFG_CPU = ( + ADM_PORTCFG_FC | + ADM_PORTCFG_SPEED_100 | + ADM_PORTCFG_OT | + ADM_PORTCFG_DPLX + ), +}; + +#define ADM_PORTCFG_PPID(N) ((n & 0x3) << 8) +#define ADM_PORTCFG_PVID(n) ((n & 0xf) << 10) + +static const u8 adm_portcfg[] = { + [0] = ADM_P0_CFG, + [1] = ADM_P1_CFG, + [2] = ADM_P2_CFG, + [3] = ADM_P3_CFG, + [4] = ADM_P4_CFG, + [5] = ADM_P5_CFG, +}; + +/* + * Split the register address in phy id and register + * it will get combined again by the mdio bus op + */ +#define PHYADDR(_reg) ((_reg >> 5) & 0xff), (_reg & 0x1f) + +#endif diff --git a/target/linux/generic-2.6/files-2.6.23/drivers/net/phy/mvswitch.c b/target/linux/generic-2.6/files-2.6.23/drivers/net/phy/mvswitch.c new file mode 100644 index 0000000000..78e5afe9bd --- /dev/null +++ b/target/linux/generic-2.6/files-2.6.23/drivers/net/phy/mvswitch.c @@ -0,0 +1,474 @@ +/* + * Marvell 88E6060 switch driver + * Copyright (c) 2008 Felix Fietkau + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License v2 as published by the + * Free Software Foundation + */ +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include +#include +#include +#include "mvswitch.h" + +/* Undefine this to use trailer mode instead. + * I don't know if header mode works with all chips */ +#define HEADER_MODE 1 + +MODULE_DESCRIPTION("Marvell 88E6060 Switch driver"); +MODULE_AUTHOR("Felix Fietkau"); +MODULE_LICENSE("GPL"); + +struct mvswitch_priv { + /* the driver's tx function */ + int (*hardstart)(struct sk_buff *skb, struct net_device *dev); + struct vlan_group *grp; + u8 vlans[16]; +}; + +#define to_mvsw(_phy) ((struct mvswitch_priv *) (_phy)->priv) + +static inline u16 +r16(struct phy_device *phydev, int addr, int reg) +{ + return phydev->bus->read(phydev->bus, addr, reg); +} + +static inline void +w16(struct phy_device *phydev, int addr, int reg, u16 val) +{ + phydev->bus->write(phydev->bus, addr, reg, val); +} + + +static int +mvswitch_mangle_tx(struct sk_buff *skb, struct net_device *dev) +{ + struct mvswitch_priv *priv; + char *buf = NULL; + u16 vid; + + priv = dev->phy_ptr; + if (unlikely(!priv)) + goto error; + + if (unlikely(skb->len < 16)) + goto error; + +#ifdef HEADER_MODE + if (__vlan_hwaccel_get_tag(skb, &vid)) + goto error; + + if (skb_cloned(skb) || (skb->len <= 62) || (skb_headroom(skb) < MV_HEADER_SIZE)) { + if (pskb_expand_head(skb, MV_HEADER_SIZE, (skb->len < 62 ? 62 - skb->len : 0), GFP_ATOMIC)) + goto error_expand; + if (skb->len < 62) + skb->len = 62; + } + buf = skb_push(skb, MV_HEADER_SIZE); +#else + if (__vlan_get_tag(skb, &vid)) + goto error; + + if (unlikely((vid > 15 || !priv->vlans[vid]))) + goto error; + + if (skb->len <= 64) { + if (pskb_expand_head(skb, 0, 64 + MV_TRAILER_SIZE - skb->len, GFP_ATOMIC)) + goto error_expand; + + buf = skb->data + 64; + skb->len = 64 + MV_TRAILER_SIZE; + } else { + if (skb_cloned(skb) || unlikely(skb_tailroom(skb) < 4)) { + if (pskb_expand_head(skb, 0, 4, GFP_ATOMIC)) + goto error_expand; + } + buf = skb_put(skb, 4); + } + + /* move the ethernet header 4 bytes forward, overwriting the vlan tag */ + memmove(skb->data + 4, skb->data, 12); + skb->data += 4; + skb->len -= 4; + skb->mac_header += 4; +#endif + + if (!buf) + goto error; + + +#ifdef HEADER_MODE + /* prepend the tag */ + *((__be16 *) buf) = cpu_to_be16( + ((vid << MV_HEADER_VLAN_S) & MV_HEADER_VLAN_M) | + ((priv->vlans[vid] << MV_HEADER_PORTS_S) & MV_HEADER_PORTS_M) + ); +#else + /* append the tag */ + *((__be32 *) buf) = cpu_to_be32(( + (MV_TRAILER_OVERRIDE << MV_TRAILER_FLAGS_S) | + ((priv->vlans[vid] & MV_TRAILER_PORTS_M) << MV_TRAILER_PORTS_S) + )); +#endif + + return priv->hardstart(skb, dev); + +error_expand: + if (net_ratelimit()) + printk("%s: failed to expand/update skb for the switch\n", dev->name); + +error: + /* any errors? drop the packet! */ + dev_kfree_skb_any(skb); + return 0; +} + +static int +mvswitch_mangle_rx(struct sk_buff *skb, int napi) +{ + struct mvswitch_priv *priv; + struct net_device *dev; + int vlan = -1; + unsigned char *buf; + int i; + + dev = skb->dev; + if (!dev) + goto error; + + priv = dev->phy_ptr; + if (!priv) + goto error; + + if (!priv->grp) + goto error; + +#ifdef HEADER_MODE + buf = skb->data; + skb_pull(skb, MV_HEADER_SIZE); +#else + buf = skb->data + skb->len - MV_TRAILER_SIZE; + if (buf[0] != 0x80) + goto error; +#endif + + /* look for the vlan matching the incoming port */ + for (i = 0; i < ARRAY_SIZE(priv->vlans); i++) { + if ((1 << buf[1]) & priv->vlans[i]) + vlan = i; + } + + if (vlan == -1) + goto error; + + skb->protocol = eth_type_trans(skb, skb->dev); + + if (napi) + return vlan_hwaccel_receive_skb(skb, priv->grp, vlan); + else + return vlan_hwaccel_rx(skb, priv->grp, vlan); + +error: + /* no vlan? eat the packet! */ + dev_kfree_skb_any(skb); + return 0; +} + + +static int +mvswitch_netif_rx(struct sk_buff *skb) +{ + return mvswitch_mangle_rx(skb, 0); +} + +static int +mvswitch_netif_receive_skb(struct sk_buff *skb) +{ + return mvswitch_mangle_rx(skb, 1); +} + + +static void +mvswitch_vlan_rx_register(struct net_device *dev, struct vlan_group *grp) +{ + struct mvswitch_priv *priv = dev->phy_ptr; + priv->grp = grp; +} + + +static int +mvswitch_wait_mask(struct phy_device *pdev, int addr, int reg, u16 mask, u16 val) +{ + int i = 100; + u16 r; + + do { + r = r16(pdev, addr, reg) & mask; + if (r == val) + return 0; + } while(--i > 0); + return -ETIMEDOUT; +} + +static int +mvswitch_config_init(struct phy_device *pdev) +{ + struct mvswitch_priv *priv = to_mvsw(pdev); + struct net_device *dev = pdev->attached_dev; + u8 vlmap = 0; + int i; + + if (!dev) + return -EINVAL; + + printk("%s: Marvell 88E6060 PHY driver attached.\n", dev->name); + pdev->supported = ADVERTISED_100baseT_Full; + pdev->advertising = ADVERTISED_100baseT_Full; + dev->phy_ptr = priv; + dev->irq = PHY_POLL; + + /* initialize default vlans */ + for (i = 0; i < MV_PORTS; i++) + priv->vlans[(i == MV_WANPORT ? 1 : 0)] |= (1 << i); + + /* before entering reset, disable all ports */ + for (i = 0; i < MV_PORTS; i++) + w16(pdev, MV_PORTREG(CONTROL, i), 0x00); + + msleep(2); /* wait for the status change to settle in */ + + /* put the ATU in reset */ + w16(pdev, MV_SWITCHREG(ATU_CTRL), MV_ATUCTL_RESET); + + i = mvswitch_wait_mask(pdev, MV_SWITCHREG(ATU_CTRL), MV_ATUCTL_RESET, 0); + if (i < 0) { + printk("%s: Timeout waiting for the switch to reset.\n", dev->name); + return i; + } + + /* set the ATU flags */ + w16(pdev, MV_SWITCHREG(ATU_CTRL), + MV_ATUCTL_NO_LEARN | + MV_ATUCTL_ATU_1K | + MV_ATUCTL_AGETIME(MV_ATUCTL_AGETIME_MIN) /* minimum without disabling ageing */ + ); + + /* initialize the cpu port */ + w16(pdev, MV_PORTREG(CONTROL, MV_CPUPORT), +#ifdef HEADER_MODE + MV_PORTCTRL_HEADER | +#else + MV_PORTCTRL_RXTR | + MV_PORTCTRL_TXTR | +#endif + MV_PORTCTRL_ENABLED + ); + /* wait for the phy change to settle in */ + msleep(2); + for (i = 0; i < MV_PORTS; i++) { + u8 pvid = 0; + int j; + + vlmap = 0; + + /* look for the matching vlan */ + for (j = 0; j < ARRAY_SIZE(priv->vlans); j++) { + if (priv->vlans[j] & (1 << i)) { + vlmap = priv->vlans[j]; + pvid = j; + } + } + /* leave port unconfigured if it's not part of a vlan */ + if (!vlmap) + continue; + + /* add the cpu port to the allowed destinations list */ + vlmap |= (1 << MV_CPUPORT); + + /* take port out of its own vlan destination map */ + vlmap &= ~(1 << i); + + /* apply vlan settings */ + w16(pdev, MV_PORTREG(VLANMAP, i), + MV_PORTVLAN_PORTS(vlmap) | + MV_PORTVLAN_ID(i) + ); + + /* re-enable port */ + w16(pdev, MV_PORTREG(CONTROL, i), + MV_PORTCTRL_ENABLED + ); + } + + w16(pdev, MV_PORTREG(VLANMAP, MV_CPUPORT), + MV_PORTVLAN_ID(MV_CPUPORT) + ); + + /* set the port association vector */ + for (i = 0; i <= MV_PORTS; i++) { + w16(pdev, MV_PORTREG(ASSOC, i), + MV_PORTASSOC_PORTS(1 << i) + ); + } + + /* init switch control */ + w16(pdev, MV_SWITCHREG(CTRL), + MV_SWITCHCTL_MSIZE | + MV_SWITCHCTL_DROP + ); + + /* hook into the tx function */ + priv->hardstart = dev->hard_start_xmit; + pdev->netif_receive_skb = mvswitch_netif_receive_skb; + pdev->netif_rx = mvswitch_netif_rx; + dev->hard_start_xmit = mvswitch_mangle_tx; + dev->vlan_rx_register = mvswitch_vlan_rx_register; +#ifdef HEADER_MODE + dev->features |= NETIF_F_HW_VLAN_RX | NETIF_F_HW_VLAN_TX; +#else + dev->features |= NETIF_F_HW_VLAN_RX; +#endif + + return 0; +} + +static int +mvswitch_read_status(struct phy_device *pdev) +{ + pdev->speed = SPEED_100; + pdev->duplex = DUPLEX_FULL; + pdev->state = PHY_UP; + + /* XXX ugly workaround: we can't force the switch + * to gracefully handle hosts moving from one port to another, + * so we have to regularly clear the ATU database */ + + /* wait for the ATU to become available */ + mvswitch_wait_mask(pdev, MV_SWITCHREG(ATU_OP), MV_ATUOP_INPROGRESS, 0); + + /* flush the ATU */ + w16(pdev, MV_SWITCHREG(ATU_OP), + MV_ATUOP_INPROGRESS | + MV_ATUOP_FLUSH_ALL + ); + + /* wait for operation to complete */ + mvswitch_wait_mask(pdev, MV_SWITCHREG(ATU_OP), MV_ATUOP_INPROGRESS, 0); + + return 0; +} + +static int +mvswitch_config_aneg(struct phy_device *phydev) +{ + return 0; +} + +static void +mvswitch_remove(struct phy_device *pdev) +{ + struct mvswitch_priv *priv = to_mvsw(pdev); + struct net_device *dev = pdev->attached_dev; + + /* restore old xmit handler */ + if (priv->hardstart && dev) + dev->hard_start_xmit = priv->hardstart; + dev->vlan_rx_register = NULL; + dev->vlan_rx_kill_vid = NULL; + dev->phy_ptr = NULL; + dev->features &= ~NETIF_F_HW_VLAN_RX; + kfree(priv); +} + +static bool +mvswitch_detect(struct mii_bus *bus, int addr) +{ + u16 reg; + int i; + + /* we attach to phy id 31 to make sure that the late probe works */ + if (addr != 31) + return false; + + /* look for the switch on the bus */ + reg = bus->read(bus, MV_PORTREG(IDENT, 0)) & MV_IDENT_MASK; + if (reg != MV_IDENT_VALUE) + return false; + + /* + * Now that we've established that the switch actually exists, let's + * get rid of the competition :) + */ + for (i = 0; i < 31; i++) { + if (!bus->phy_map[i]) + continue; + + device_unregister(&bus->phy_map[i]->dev); + kfree(bus->phy_map[i]); + bus->phy_map[i] = NULL; + } + + return true; +} + +static int +mvswitch_probe(struct phy_device *pdev) +{ + struct mvswitch_priv *priv; + + priv = kzalloc(sizeof(struct mvswitch_priv), GFP_KERNEL); + if (priv == NULL) + return -ENOMEM; + + pdev->priv = priv; + + return 0; +} + + +static struct phy_driver mvswitch_driver = { + .name = "Marvell 88E6060", + .features = PHY_BASIC_FEATURES, + .detect = &mvswitch_detect, + .probe = &mvswitch_probe, + .remove = &mvswitch_remove, + .config_init = &mvswitch_config_init, + .config_aneg = &mvswitch_config_aneg, + .read_status = &mvswitch_read_status, + .driver = { .owner = THIS_MODULE,}, +}; + +static int __init +mvswitch_init(void) +{ + return phy_driver_register(&mvswitch_driver); +} + +static void __exit +mvswitch_exit(void) +{ + phy_driver_unregister(&mvswitch_driver); +} + +module_init(mvswitch_init); +module_exit(mvswitch_exit); diff --git a/target/linux/generic-2.6/files-2.6.23/drivers/net/phy/mvswitch.h b/target/linux/generic-2.6/files-2.6.23/drivers/net/phy/mvswitch.h new file mode 100644 index 0000000000..1563eec4d5 --- /dev/null +++ b/target/linux/generic-2.6/files-2.6.23/drivers/net/phy/mvswitch.h @@ -0,0 +1,145 @@ +/* + * Marvell 88E6060 switch driver + * Copyright (c) 2008 Felix Fietkau + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License v2 as published by the + * Free Software Foundation + */ +#ifndef __MVSWITCH_H +#define __MVSWITCH_H + +#define MV_HEADER_SIZE 2 +#define MV_HEADER_PORTS_M 0x001f +#define MV_HEADER_PORTS_S 0 +#define MV_HEADER_VLAN_M 0xf000 +#define MV_HEADER_VLAN_S 12 + +#define MV_TRAILER_SIZE 4 +#define MV_TRAILER_PORTS_M 0x1f +#define MV_TRAILER_PORTS_S 16 +#define MV_TRAILER_FLAGS_S 24 +#define MV_TRAILER_OVERRIDE 0x80 + + +#define MV_PORTS 5 +#define MV_WANPORT 4 +#define MV_CPUPORT 5 + +#define MV_BASE 0x10 + +#define MV_PHYPORT_BASE (MV_BASE + 0x0) +#define MV_PHYPORT(_n) (MV_PHYPORT_BASE + (_n)) +#define MV_SWITCHPORT_BASE (MV_BASE + 0x8) +#define MV_SWITCHPORT(_n) (MV_SWITCHPORT_BASE + (_n)) +#define MV_SWITCHREGS (MV_BASE + 0xf) + +enum { + MV_PHY_CONTROL = 0x00, + MV_PHY_STATUS = 0x01, + MV_PHY_IDENT0 = 0x02, + MV_PHY_IDENT1 = 0x03, + MV_PHY_ANEG = 0x04, + MV_PHY_LINK_ABILITY = 0x05, + MV_PHY_ANEG_EXPAND = 0x06, + MV_PHY_XMIT_NEXTP = 0x07, + MV_PHY_LINK_NEXTP = 0x08, + MV_PHY_CONTROL1 = 0x10, + MV_PHY_STATUS1 = 0x11, + MV_PHY_INTR_EN = 0x12, + MV_PHY_INTR_STATUS = 0x13, + MV_PHY_INTR_PORT = 0x14, + MV_PHY_RECV_COUNTER = 0x16, + MV_PHY_LED_PARALLEL = 0x16, + MV_PHY_LED_STREAM = 0x17, + MV_PHY_LED_CTRL = 0x18, + MV_PHY_LED_OVERRIDE = 0x19, + MV_PHY_VCT_CTRL = 0x1a, + MV_PHY_VCT_STATUS = 0x1b, + MV_PHY_CONTROL2 = 0x1e +}; +#define MV_PHYREG(_type, _port) MV_PHYPORT(_port), MV_PHY_##_type + +enum { + MV_PORT_STATUS = 0x00, + MV_PORT_IDENT = 0x03, + MV_PORT_CONTROL = 0x04, + MV_PORT_VLANMAP = 0x06, + MV_PORT_ASSOC = 0x0b, + MV_PORT_RXCOUNT = 0x10, + MV_PORT_TXCOUNT = 0x11, +}; +#define MV_PORTREG(_type, _port) MV_SWITCHPORT(_port), MV_PORT_##_type + +enum { + MV_PORTCTRL_BLOCK = (1 << 0), + MV_PORTCTRL_LEARN = (2 << 0), + MV_PORTCTRL_ENABLED = (3 << 0), + MV_PORTCTRL_VLANTUN = (1 << 7), /* Enforce VLANs on packets */ + MV_PORTCTRL_RXTR = (1 << 8), /* Enable Marvell packet trailer for ingress */ + MV_PORTCTRL_HEADER = (1 << 11), /* Enable Marvell packet header mode for port */ + MV_PORTCTRL_TXTR = (1 << 14), /* Enable Marvell packet trailer for egress */ + MV_PORTCTRL_FORCEFL = (1 << 15), /* force flow control */ +}; + +#define MV_PORTVLAN_ID(_n) (((_n) & 0xf) << 12) +#define MV_PORTVLAN_PORTS(_n) ((_n) & 0x3f) + +#define MV_PORTASSOC_PORTS(_n) ((_n) & 0x1f) +#define MV_PORTASSOC_MONITOR (1 << 15) + +enum { + MV_SWITCH_MAC0 = 0x01, + MV_SWITCH_MAC1 = 0x02, + MV_SWITCH_MAC2 = 0x03, + MV_SWITCH_CTRL = 0x04, + MV_SWITCH_ATU_CTRL = 0x0a, + MV_SWITCH_ATU_OP = 0x0b, + MV_SWITCH_ATU_DATA = 0x0c, + MV_SWITCH_ATU_MAC0 = 0x0d, + MV_SWITCH_ATU_MAC1 = 0x0e, + MV_SWITCH_ATU_MAC2 = 0x0f, +}; +#define MV_SWITCHREG(_type) MV_SWITCHREGS, MV_SWITCH_##_type + +enum { + MV_SWITCHCTL_EEIE = (1 << 0), /* EEPROM interrupt enable */ + MV_SWITCHCTL_PHYIE = (1 << 1), /* PHY interrupt enable */ + MV_SWITCHCTL_ATUDONE= (1 << 2), /* ATU done interrupt enable */ + MV_SWITCHCTL_ATUIE = (1 << 3), /* ATU interrupt enable */ + MV_SWITCHCTL_CTRMODE= (1 << 8), /* statistics for rx and tx errors */ + MV_SWITCHCTL_RELOAD = (1 << 9), /* reload registers from eeprom */ + MV_SWITCHCTL_MSIZE = (1 << 10), /* increase maximum frame size */ + MV_SWITCHCTL_DROP = (1 << 13), /* discard frames with excessive collisions */ +}; + +enum { +#define MV_ATUCTL_AGETIME_MIN 16 +#define MV_ATUCTL_AGETIME_MAX 4080 +#define MV_ATUCTL_AGETIME(_n) ((((_n) / 16) & 0xff) << 4) + MV_ATUCTL_ATU_256 = (0 << 12), + MV_ATUCTL_ATU_512 = (1 << 12), + MV_ATUCTL_ATU_1K = (2 << 12), + MV_ATUCTL_ATUMASK = (3 << 12), + MV_ATUCTL_NO_LEARN = (1 << 14), + MV_ATUCTL_RESET = (1 << 15), +}; + +enum { +#define MV_ATUOP_DBNUM(_n) ((_n) & 0x0f) + + MV_ATUOP_NOOP = (0 << 12), + MV_ATUOP_FLUSH_ALL = (1 << 12), + MV_ATUOP_FLUSH_U = (2 << 12), + MV_ATUOP_LOAD_DB = (3 << 12), + MV_ATUOP_GET_NEXT = (4 << 12), + MV_ATUOP_FLUSH_DB = (5 << 12), + MV_ATUOP_FLUSH_DB_UU= (6 << 12), + + MV_ATUOP_INPROGRESS = (1 << 15), +}; + +#define MV_IDENT_MASK 0xfff0 +#define MV_IDENT_VALUE 0x0600 + +#endif diff --git a/target/linux/generic-2.6/files-2.6.23/drivers/spi/spi_gpio.c b/target/linux/generic-2.6/files-2.6.23/drivers/spi/spi_gpio.c new file mode 100644 index 0000000000..31048acc3f --- /dev/null +++ b/target/linux/generic-2.6/files-2.6.23/drivers/spi/spi_gpio.c @@ -0,0 +1,242 @@ +/* + * Bitbanging SPI bus driver using GPIO API + * + * Copyright (c) 2008 Piotr Skamruk + * Copyright (c) 2008 Michael Buesch + * + * based on spi_s3c2410_gpio.c + * Copyright (c) 2006 Ben Dooks + * Copyright (c) 2006 Simtec Electronics + * and on i2c-gpio.c + * Copyright (C) 2007 Atmel Corporation + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include "linux/spi/spi_gpio.h" //XXX +#include + + +struct spi_gpio { + struct spi_bitbang bitbang; + struct spi_gpio_platform_data *info; + struct platform_device *pdev; + struct spi_board_info bi; +}; + + +static inline struct spi_gpio *spidev_to_sg(struct spi_device *dev) +{ + return dev->controller_data; +} + +static inline void setsck(struct spi_device *dev, int val) +{ + struct spi_gpio *sp = spidev_to_sg(dev); + gpio_set_value(sp->info->pin_clk, val ? 1 : 0); +} + +static inline void setmosi(struct spi_device *dev, int val ) +{ + struct spi_gpio *sp = spidev_to_sg(dev); + gpio_set_value(sp->info->pin_mosi, val ? 1 : 0); +} + +static inline u32 getmiso(struct spi_device *dev) +{ + struct spi_gpio *sp = spidev_to_sg(dev); + return gpio_get_value(sp->info->pin_miso) ? 1 : 0; +} + +static inline void do_spidelay(struct spi_device *dev, unsigned nsecs) +{ + struct spi_gpio *sp = spidev_to_sg(dev); + + if (!sp->info->no_spi_delay) + ndelay(nsecs); +} + +#define spidelay(nsecs) do { \ + /* Steal the spi_device pointer from our caller. \ + * The bitbang-API should probably get fixed here... */ \ + do_spidelay(spi, nsecs); \ + } while (0) + +#define EXPAND_BITBANG_TXRX +#include + +static u32 spi_gpio_txrx_mode0(struct spi_device *spi, + unsigned nsecs, u32 word, u8 bits) +{ + return bitbang_txrx_be_cpha0(spi, nsecs, 0, word, bits); +} + +static u32 spi_gpio_txrx_mode1(struct spi_device *spi, + unsigned nsecs, u32 word, u8 bits) +{ + return bitbang_txrx_be_cpha1(spi, nsecs, 0, word, bits); +} + +static u32 spi_gpio_txrx_mode2(struct spi_device *spi, + unsigned nsecs, u32 word, u8 bits) +{ + return bitbang_txrx_be_cpha0(spi, nsecs, 1, word, bits); +} + +static u32 spi_gpio_txrx_mode3(struct spi_device *spi, + unsigned nsecs, u32 word, u8 bits) +{ + return bitbang_txrx_be_cpha1(spi, nsecs, 1, word, bits); +} + +static void spi_gpio_chipselect(struct spi_device *dev, int on) +{ + struct spi_gpio *sp = spidev_to_sg(dev); + + if (sp->info->cs_activelow) + on = !on; + gpio_set_value(sp->info->pin_cs, on ? 1 : 0); +} + +static int spi_gpio_probe(struct platform_device *pdev) +{ + struct spi_master *master; + struct spi_gpio_platform_data *pdata; + struct spi_gpio *sp; + struct spi_device *spidev; + int err; + + pdata = pdev->dev.platform_data; + if (!pdata) + return -ENXIO; + + err = -ENOMEM; + master = spi_alloc_master(&pdev->dev, sizeof(struct spi_gpio)); + if (!master) + goto err_alloc_master; + + sp = spi_master_get_devdata(master); + platform_set_drvdata(pdev, sp); + sp->info = pdata; + + err = gpio_request(pdata->pin_clk, "spi_clock"); + if (err) + goto err_request_clk; + err = gpio_request(pdata->pin_mosi, "spi_mosi"); + if (err) + goto err_request_mosi; + err = gpio_request(pdata->pin_miso, "spi_miso"); + if (err) + goto err_request_miso; + err = gpio_request(pdata->pin_cs, "spi_cs"); + if (err) + goto err_request_cs; + + sp->bitbang.master = spi_master_get(master); + sp->bitbang.master->bus_num = -1; + sp->bitbang.master->num_chipselect = 1; + sp->bitbang.chipselect = spi_gpio_chipselect; + sp->bitbang.txrx_word[SPI_MODE_0] = spi_gpio_txrx_mode0; + sp->bitbang.txrx_word[SPI_MODE_1] = spi_gpio_txrx_mode1; + sp->bitbang.txrx_word[SPI_MODE_2] = spi_gpio_txrx_mode2; + sp->bitbang.txrx_word[SPI_MODE_3] = spi_gpio_txrx_mode3; + + gpio_direction_output(pdata->pin_clk, 0); + gpio_direction_output(pdata->pin_mosi, 0); + gpio_direction_output(pdata->pin_cs, + pdata->cs_activelow ? 1 : 0); + gpio_direction_input(pdata->pin_miso); + + err = spi_bitbang_start(&sp->bitbang); + if (err) + goto err_no_bitbang; + err = pdata->boardinfo_setup(&sp->bi, master, + pdata->boardinfo_setup_data); + if (err) + goto err_bi_setup; + sp->bi.controller_data = sp; + spidev = spi_new_device(master, &sp->bi); + if (!spidev) + goto err_new_dev; + + return 0; + +err_new_dev: +err_bi_setup: + spi_bitbang_stop(&sp->bitbang); +err_no_bitbang: + spi_master_put(sp->bitbang.master); + gpio_free(pdata->pin_cs); +err_request_cs: + gpio_free(pdata->pin_miso); +err_request_miso: + gpio_free(pdata->pin_mosi); +err_request_mosi: + gpio_free(pdata->pin_clk); +err_request_clk: + kfree(master); + +err_alloc_master: + return err; +} + +static int __devexit spi_gpio_remove(struct platform_device *pdev) +{ + struct spi_gpio *sp; + struct spi_gpio_platform_data *pdata; + + pdata = pdev->dev.platform_data; + sp = platform_get_drvdata(pdev); + + gpio_free(pdata->pin_clk); + gpio_free(pdata->pin_mosi); + gpio_free(pdata->pin_miso); + gpio_free(pdata->pin_cs); + spi_bitbang_stop(&sp->bitbang); + spi_master_put(sp->bitbang.master); + + return 0; +} + +static struct platform_driver spi_gpio_driver = { + .driver = { + .name = "spi-gpio", + .owner = THIS_MODULE, + }, + .probe = spi_gpio_probe, + .remove = __devexit_p(spi_gpio_remove), +}; + +static int __init spi_gpio_init(void) +{ + int err; + + err = platform_driver_register(&spi_gpio_driver); + if (err) + printk(KERN_ERR "spi-gpio: register failed: %d\n", err); + + return err; +} +module_init(spi_gpio_init); + +static void __exit spi_gpio_exit(void) +{ + platform_driver_unregister(&spi_gpio_driver); +} +module_exit(spi_gpio_exit); + +MODULE_AUTHOR("Piot Skamruk "); +MODULE_AUTHOR("Michael Buesch"); +MODULE_DESCRIPTION("Platform independent GPIO bitbangling SPI driver"); +MODULE_LICENSE("GPL v2"); diff --git a/target/linux/generic-2.6/files-2.6.23/drivers/ssb/Kconfig b/target/linux/generic-2.6/files-2.6.23/drivers/ssb/Kconfig new file mode 100644 index 0000000000..d976660cb7 --- /dev/null +++ b/target/linux/generic-2.6/files-2.6.23/drivers/ssb/Kconfig @@ -0,0 +1,117 @@ +menu "Sonics Silicon Backplane" + +config SSB_POSSIBLE + bool + depends on HAS_IOMEM + default y + +config SSB + tristate "Sonics Silicon Backplane support" + depends on SSB_POSSIBLE + help + Support for the Sonics Silicon Backplane bus. + You only need to enable this option, if you are + configuring a kernel for an embedded system with + this bus. + It will be auto-selected if needed in other + environments. + + The module will be called ssb. + + If unsure, say N. + +config SSB_PCIHOST_POSSIBLE + bool + depends on SSB && (PCI = y || PCI = SSB) + default y + +config SSB_PCIHOST + bool "Support for SSB on PCI-bus host" + depends on SSB_PCIHOST_POSSIBLE + default y + help + Support for a Sonics Silicon Backplane on top + of a PCI device. + + If unsure, say Y + +config SSB_PCMCIAHOST_POSSIBLE + bool + depends on SSB && (PCMCIA = y || PCMCIA = SSB) && EXPERIMENTAL + default y + +config SSB_PCMCIAHOST + bool "Support for SSB on PCMCIA-bus host (EXPERIMENTAL)" + depends on SSB_PCMCIAHOST_POSSIBLE + help + Support for a Sonics Silicon Backplane on top + of a PCMCIA device. + + If unsure, say N + +config SSB_SILENT + bool "No SSB kernel messages" + depends on SSB && EMBEDDED + help + This option turns off all Sonics Silicon Backplane printks. + Note that you won't be able to identify problems, once + messages are turned off. + This might only be desired for production kernels on + embedded devices to reduce the kernel size. + + Say N + +config SSB_DEBUG + bool "SSB debugging" + depends on SSB && !SSB_SILENT + help + This turns on additional runtime checks and debugging + messages. Turn this on for SSB troubleshooting. + + If unsure, say N + +config SSB_SERIAL + bool + depends on SSB + # ChipCommon and ExtIf serial support routines. + +config SSB_DRIVER_PCICORE_POSSIBLE + bool + depends on SSB_PCIHOST + default y + +config SSB_DRIVER_PCICORE + bool "SSB PCI core driver" + depends on SSB_DRIVER_PCICORE_POSSIBLE + help + Driver for the Sonics Silicon Backplane attached + Broadcom PCI core. + + If unsure, say Y + +config SSB_PCICORE_HOSTMODE + bool "Hostmode support for SSB PCI core (EXPERIMENTAL)" + depends on SSB_DRIVER_PCICORE && SSB_DRIVER_MIPS && EXPERIMENTAL + help + PCIcore hostmode operation (external PCI bus). + +config SSB_DRIVER_MIPS + bool "SSB Broadcom MIPS core driver (EXPERIMENTAL)" + depends on SSB && MIPS && EXPERIMENTAL + select SSB_SERIAL + help + Driver for the Sonics Silicon Backplane attached + Broadcom MIPS core. + + If unsure, say N + +config SSB_DRIVER_EXTIF + bool "SSB Broadcom EXTIF core driver (EXPERIMENTAL)" + depends on SSB_DRIVER_MIPS && EXPERIMENTAL + help + Driver for the Sonics Silicon Backplane attached + Broadcom EXTIF core. + + If unsure, say N + +endmenu diff --git a/target/linux/generic-2.6/files-2.6.23/drivers/ssb/Makefile b/target/linux/generic-2.6/files-2.6.23/drivers/ssb/Makefile new file mode 100644 index 0000000000..7be3975958 --- /dev/null +++ b/target/linux/generic-2.6/files-2.6.23/drivers/ssb/Makefile @@ -0,0 +1,18 @@ +# core +ssb-y += main.o scan.o + +# host support +ssb-$(CONFIG_SSB_PCIHOST) += pci.o pcihost_wrapper.o +ssb-$(CONFIG_SSB_PCMCIAHOST) += pcmcia.o + +# built-in drivers +ssb-y += driver_chipcommon.o +ssb-$(CONFIG_SSB_DRIVER_MIPS) += driver_mipscore.o +ssb-$(CONFIG_SSB_DRIVER_EXTIF) += driver_extif.o +ssb-$(CONFIG_SSB_DRIVER_PCICORE) += driver_pcicore.o + +# b43 pci-ssb-bridge driver +# Not strictly a part of SSB, but kept here for convenience +ssb-$(CONFIG_SSB_PCIHOST) += b43_pci_bridge.o + +obj-$(CONFIG_SSB) += ssb.o diff --git a/target/linux/generic-2.6/files-2.6.23/drivers/ssb/b43_pci_bridge.c b/target/linux/generic-2.6/files-2.6.23/drivers/ssb/b43_pci_bridge.c new file mode 100644 index 0000000000..2d27d6d6d0 --- /dev/null +++ b/target/linux/generic-2.6/files-2.6.23/drivers/ssb/b43_pci_bridge.c @@ -0,0 +1,50 @@ +/* + * Broadcom 43xx PCI-SSB bridge module + * + * This technically is a separate PCI driver module, but + * because of its small size we include it in the SSB core + * instead of creating a standalone module. + * + * Copyright 2007 Michael Buesch + * + * Licensed under the GNU/GPL. See COPYING for details. + */ + +#include +#include + +#include "ssb_private.h" + + +static const struct pci_device_id b43_pci_bridge_tbl[] = { + { PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, 0x4301) }, + { PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, 0x4307) }, + { PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, 0x4311) }, + { PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, 0x4312) }, + { PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, 0x4318) }, + { PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, 0x4319) }, + { PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, 0x4320) }, + { PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, 0x4321) }, + { PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, 0x4324) }, + { PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, 0x4325) }, + { PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, 0x4328) }, + { PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, 0x4329) }, + { 0, }, +}; +MODULE_DEVICE_TABLE(pci, b43_pci_bridge_tbl); + +static struct pci_driver b43_pci_bridge_driver = { + .name = "b43-pci-bridge", + .id_table = b43_pci_bridge_tbl, +}; + + +int __init b43_pci_ssb_bridge_init(void) +{ + return ssb_pcihost_register(&b43_pci_bridge_driver); +} + +void __exit b43_pci_ssb_bridge_exit(void) +{ + ssb_pcihost_unregister(&b43_pci_bridge_driver); +} diff --git a/target/linux/generic-2.6/files-2.6.23/drivers/ssb/driver_chipcommon.c b/target/linux/generic-2.6/files-2.6.23/drivers/ssb/driver_chipcommon.c new file mode 100644 index 0000000000..6fbf1c53b6 --- /dev/null +++ b/target/linux/generic-2.6/files-2.6.23/drivers/ssb/driver_chipcommon.c @@ -0,0 +1,445 @@ +/* + * Sonics Silicon Backplane + * Broadcom ChipCommon core driver + * + * Copyright 2005, Broadcom Corporation + * Copyright 2006, 2007, Michael Buesch + * + * Licensed under the GNU/GPL. See COPYING for details. + */ + +#include +#include +#include + +#include "ssb_private.h" + + +/* Clock sources */ +enum ssb_clksrc { + /* PCI clock */ + SSB_CHIPCO_CLKSRC_PCI, + /* Crystal slow clock oscillator */ + SSB_CHIPCO_CLKSRC_XTALOS, + /* Low power oscillator */ + SSB_CHIPCO_CLKSRC_LOPWROS, +}; + + +static inline u32 chipco_read32(struct ssb_chipcommon *cc, + u16 offset) +{ + return ssb_read32(cc->dev, offset); +} + +static inline void chipco_write32(struct ssb_chipcommon *cc, + u16 offset, + u32 value) +{ + ssb_write32(cc->dev, offset, value); +} + +static inline void chipco_write32_masked(struct ssb_chipcommon *cc, u16 offset, + u32 mask, u32 value) +{ + value &= mask; + value |= chipco_read32(cc, offset) & ~mask; + chipco_write32(cc, offset, value); +} + +void ssb_chipco_set_clockmode(struct ssb_chipcommon *cc, + enum ssb_clkmode mode) +{ + struct ssb_device *ccdev = cc->dev; + struct ssb_bus *bus; + u32 tmp; + + if (!ccdev) + return; + bus = ccdev->bus; + /* chipcommon cores prior to rev6 don't support dynamic clock control */ + if (ccdev->id.revision < 6) + return; + /* chipcommon cores rev10 are a whole new ball game */ + if (ccdev->id.revision >= 10) + return; + if (!(cc->capabilities & SSB_CHIPCO_CAP_PCTL)) + return; + + switch (mode) { + case SSB_CLKMODE_SLOW: + tmp = chipco_read32(cc, SSB_CHIPCO_SLOWCLKCTL); + tmp |= SSB_CHIPCO_SLOWCLKCTL_FSLOW; + chipco_write32(cc, SSB_CHIPCO_SLOWCLKCTL, tmp); + break; + case SSB_CLKMODE_FAST: + ssb_pci_xtal(bus, SSB_GPIO_XTAL, 1); /* Force crystal on */ + tmp = chipco_read32(cc, SSB_CHIPCO_SLOWCLKCTL); + tmp &= ~SSB_CHIPCO_SLOWCLKCTL_FSLOW; + tmp |= SSB_CHIPCO_SLOWCLKCTL_IPLL; + chipco_write32(cc, SSB_CHIPCO_SLOWCLKCTL, tmp); + break; + case SSB_CLKMODE_DYNAMIC: + tmp = chipco_read32(cc, SSB_CHIPCO_SLOWCLKCTL); + tmp &= ~SSB_CHIPCO_SLOWCLKCTL_FSLOW; + tmp &= ~SSB_CHIPCO_SLOWCLKCTL_IPLL; + tmp &= ~SSB_CHIPCO_SLOWCLKCTL_ENXTAL; + if ((tmp & SSB_CHIPCO_SLOWCLKCTL_SRC) != SSB_CHIPCO_SLOWCLKCTL_SRC_XTAL) + tmp |= SSB_CHIPCO_SLOWCLKCTL_ENXTAL; + chipco_write32(cc, SSB_CHIPCO_SLOWCLKCTL, tmp); + + /* for dynamic control, we have to release our xtal_pu "force on" */ + if (tmp & SSB_CHIPCO_SLOWCLKCTL_ENXTAL) + ssb_pci_xtal(bus, SSB_GPIO_XTAL, 0); + break; + default: + SSB_WARN_ON(1); + } +} + +/* Get the Slow Clock Source */ +static enum ssb_clksrc chipco_pctl_get_slowclksrc(struct ssb_chipcommon *cc) +{ + struct ssb_bus *bus = cc->dev->bus; + u32 uninitialized_var(tmp); + + if (cc->dev->id.revision < 6) { + if (bus->bustype == SSB_BUSTYPE_SSB || + bus->bustype == SSB_BUSTYPE_PCMCIA) + return SSB_CHIPCO_CLKSRC_XTALOS; + if (bus->bustype == SSB_BUSTYPE_PCI) { + pci_read_config_dword(bus->host_pci, SSB_GPIO_OUT, &tmp); + if (tmp & 0x10) + return SSB_CHIPCO_CLKSRC_PCI; + return SSB_CHIPCO_CLKSRC_XTALOS; + } + } + if (cc->dev->id.revision < 10) { + tmp = chipco_read32(cc, SSB_CHIPCO_SLOWCLKCTL); + tmp &= 0x7; + if (tmp == 0) + return SSB_CHIPCO_CLKSRC_LOPWROS; + if (tmp == 1) + return SSB_CHIPCO_CLKSRC_XTALOS; + if (tmp == 2) + return SSB_CHIPCO_CLKSRC_PCI; + } + + return SSB_CHIPCO_CLKSRC_XTALOS; +} + +/* Get maximum or minimum (depending on get_max flag) slowclock frequency. */ +static int chipco_pctl_clockfreqlimit(struct ssb_chipcommon *cc, int get_max) +{ + int uninitialized_var(limit); + enum ssb_clksrc clocksrc; + int divisor = 1; + u32 tmp; + + clocksrc = chipco_pctl_get_slowclksrc(cc); + if (cc->dev->id.revision < 6) { + switch (clocksrc) { + case SSB_CHIPCO_CLKSRC_PCI: + divisor = 64; + break; + case SSB_CHIPCO_CLKSRC_XTALOS: + divisor = 32; + break; + default: + SSB_WARN_ON(1); + } + } else if (cc->dev->id.revision < 10) { + switch (clocksrc) { + case SSB_CHIPCO_CLKSRC_LOPWROS: + break; + case SSB_CHIPCO_CLKSRC_XTALOS: + case SSB_CHIPCO_CLKSRC_PCI: + tmp = chipco_read32(cc, SSB_CHIPCO_SLOWCLKCTL); + divisor = (tmp >> 16) + 1; + divisor *= 4; + break; + } + } else { + tmp = chipco_read32(cc, SSB_CHIPCO_SYSCLKCTL); + divisor = (tmp >> 16) + 1; + divisor *= 4; + } + + switch (clocksrc) { + case SSB_CHIPCO_CLKSRC_LOPWROS: + if (get_max) + limit = 43000; + else + limit = 25000; + break; + case SSB_CHIPCO_CLKSRC_XTALOS: + if (get_max) + limit = 20200000; + else + limit = 19800000; + break; + case SSB_CHIPCO_CLKSRC_PCI: + if (get_max) + limit = 34000000; + else + limit = 25000000; + break; + } + limit /= divisor; + + return limit; +} + +static void chipco_powercontrol_init(struct ssb_chipcommon *cc) +{ + struct ssb_bus *bus = cc->dev->bus; + + if (bus->chip_id == 0x4321) { + if (bus->chip_rev == 0) + chipco_write32(cc, SSB_CHIPCO_CHIPCTL, 0x3A4); + else if (bus->chip_rev == 1) + chipco_write32(cc, SSB_CHIPCO_CHIPCTL, 0xA4); + } + + if (!(cc->capabilities & SSB_CHIPCO_CAP_PCTL)) + return; + + if (cc->dev->id.revision >= 10) { + /* Set Idle Power clock rate to 1Mhz */ + chipco_write32(cc, SSB_CHIPCO_SYSCLKCTL, + (chipco_read32(cc, SSB_CHIPCO_SYSCLKCTL) & + 0x0000FFFF) | 0x00040000); + } else { + int maxfreq; + + maxfreq = chipco_pctl_clockfreqlimit(cc, 1); + chipco_write32(cc, SSB_CHIPCO_PLLONDELAY, + (maxfreq * 150 + 999999) / 1000000); + chipco_write32(cc, SSB_CHIPCO_FREFSELDELAY, + (maxfreq * 15 + 999999) / 1000000); + } +} + +static void calc_fast_powerup_delay(struct ssb_chipcommon *cc) +{ + struct ssb_bus *bus = cc->dev->bus; + int minfreq; + unsigned int tmp; + u32 pll_on_delay; + + if (bus->bustype != SSB_BUSTYPE_PCI) + return; + if (!(cc->capabilities & SSB_CHIPCO_CAP_PCTL)) + return; + + minfreq = chipco_pctl_clockfreqlimit(cc, 0); + pll_on_delay = chipco_read32(cc, SSB_CHIPCO_PLLONDELAY); + tmp = (((pll_on_delay + 2) * 1000000) + (minfreq - 1)) / minfreq; + SSB_WARN_ON(tmp & ~0xFFFF); + + cc->fast_pwrup_delay = tmp; +} + +void ssb_chipcommon_init(struct ssb_chipcommon *cc) +{ + if (!cc->dev) + return; /* We don't have a ChipCommon */ + chipco_powercontrol_init(cc); + ssb_chipco_set_clockmode(cc, SSB_CLKMODE_FAST); + calc_fast_powerup_delay(cc); +} + +void ssb_chipco_suspend(struct ssb_chipcommon *cc, pm_message_t state) +{ + if (!cc->dev) + return; + ssb_chipco_set_clockmode(cc, SSB_CLKMODE_SLOW); +} + +void ssb_chipco_resume(struct ssb_chipcommon *cc) +{ + if (!cc->dev) + return; + chipco_powercontrol_init(cc); + ssb_chipco_set_clockmode(cc, SSB_CLKMODE_FAST); +} + +/* Get the processor clock */ +void ssb_chipco_get_clockcpu(struct ssb_chipcommon *cc, + u32 *plltype, u32 *n, u32 *m) +{ + *n = chipco_read32(cc, SSB_CHIPCO_CLOCK_N); + *plltype = (cc->capabilities & SSB_CHIPCO_CAP_PLLT); + switch (*plltype) { + case SSB_PLLTYPE_2: + case SSB_PLLTYPE_4: + case SSB_PLLTYPE_6: + case SSB_PLLTYPE_7: + *m = chipco_read32(cc, SSB_CHIPCO_CLOCK_MIPS); + break; + case SSB_PLLTYPE_3: + /* 5350 uses m2 to control mips */ + *m = chipco_read32(cc, SSB_CHIPCO_CLOCK_M2); + break; + default: + *m = chipco_read32(cc, SSB_CHIPCO_CLOCK_SB); + break; + } +} + +/* Get the bus clock */ +void ssb_chipco_get_clockcontrol(struct ssb_chipcommon *cc, + u32 *plltype, u32 *n, u32 *m) +{ + *n = chipco_read32(cc, SSB_CHIPCO_CLOCK_N); + *plltype = (cc->capabilities & SSB_CHIPCO_CAP_PLLT); + switch (*plltype) { + case SSB_PLLTYPE_6: /* 100/200 or 120/240 only */ + *m = chipco_read32(cc, SSB_CHIPCO_CLOCK_MIPS); + break; + case SSB_PLLTYPE_3: /* 25Mhz, 2 dividers */ + if (cc->dev->bus->chip_id != 0x5365) { + *m = chipco_read32(cc, SSB_CHIPCO_CLOCK_M2); + break; + } + /* Fallthough */ + default: + *m = chipco_read32(cc, SSB_CHIPCO_CLOCK_SB); + } +} + +void ssb_chipco_timing_init(struct ssb_chipcommon *cc, + unsigned long ns) +{ + struct ssb_device *dev = cc->dev; + struct ssb_bus *bus = dev->bus; + u32 tmp; + + /* set register for external IO to control LED. */ + chipco_write32(cc, SSB_CHIPCO_PROG_CFG, 0x11); + tmp = DIV_ROUND_UP(10, ns) << SSB_PROG_WCNT_3_SHIFT; /* Waitcount-3 = 10ns */ + tmp |= DIV_ROUND_UP(40, ns) << SSB_PROG_WCNT_1_SHIFT; /* Waitcount-1 = 40ns */ + tmp |= DIV_ROUND_UP(240, ns); /* Waitcount-0 = 240ns */ + chipco_write32(cc, SSB_CHIPCO_PROG_WAITCNT, tmp); /* 0x01020a0c for a 100Mhz clock */ + + /* Set timing for the flash */ + tmp = DIV_ROUND_UP(10, ns) << SSB_FLASH_WCNT_3_SHIFT; /* Waitcount-3 = 10nS */ + tmp |= DIV_ROUND_UP(10, ns) << SSB_FLASH_WCNT_1_SHIFT; /* Waitcount-1 = 10nS */ + tmp |= DIV_ROUND_UP(120, ns); /* Waitcount-0 = 120nS */ + if ((bus->chip_id == 0x5365) || + (dev->id.revision < 9)) + chipco_write32(cc, SSB_CHIPCO_FLASH_WAITCNT, tmp); + if ((bus->chip_id == 0x5365) || + (dev->id.revision < 9) || + ((bus->chip_id == 0x5350) && (bus->chip_rev == 0))) + chipco_write32(cc, SSB_CHIPCO_PCMCIA_MEMWAIT, tmp); + + if (bus->chip_id == 0x5350) { + /* Enable EXTIF */ + tmp = DIV_ROUND_UP(10, ns) << SSB_PROG_WCNT_3_SHIFT; /* Waitcount-3 = 10ns */ + tmp |= DIV_ROUND_UP(20, ns) << SSB_PROG_WCNT_2_SHIFT; /* Waitcount-2 = 20ns */ + tmp |= DIV_ROUND_UP(100, ns) << SSB_PROG_WCNT_1_SHIFT; /* Waitcount-1 = 100ns */ + tmp |= DIV_ROUND_UP(120, ns); /* Waitcount-0 = 120ns */ + chipco_write32(cc, SSB_CHIPCO_PROG_WAITCNT, tmp); /* 0x01020a0c for a 100Mhz clock */ + } +} + +/* Set chip watchdog reset timer to fire in 'ticks' backplane cycles */ +void ssb_chipco_watchdog_timer_set(struct ssb_chipcommon *cc, u32 ticks) +{ + /* instant NMI */ + chipco_write32(cc, SSB_CHIPCO_WATCHDOG, ticks); +} + +u32 ssb_chipco_gpio_in(struct ssb_chipcommon *cc, u32 mask) +{ + return chipco_read32(cc, SSB_CHIPCO_GPIOIN) & mask; +} + +void ssb_chipco_gpio_out(struct ssb_chipcommon *cc, u32 mask, u32 value) +{ + chipco_write32_masked(cc, SSB_CHIPCO_GPIOOUT, mask, value); +} + +void ssb_chipco_gpio_outen(struct ssb_chipcommon *cc, u32 mask, u32 value) +{ + chipco_write32_masked(cc, SSB_CHIPCO_GPIOOUTEN, mask, value); +} + +#ifdef CONFIG_SSB_SERIAL +int ssb_chipco_serial_init(struct ssb_chipcommon *cc, + struct ssb_serial_port *ports) +{ + struct ssb_bus *bus = cc->dev->bus; + int nr_ports = 0; + u32 plltype; + unsigned int irq; + u32 baud_base, div; + u32 i, n; + + plltype = (cc->capabilities & SSB_CHIPCO_CAP_PLLT); + irq = ssb_mips_irq(cc->dev); + + if (plltype == SSB_PLLTYPE_1) { + /* PLL clock */ + baud_base = ssb_calc_clock_rate(plltype, + chipco_read32(cc, SSB_CHIPCO_CLOCK_N), + chipco_read32(cc, SSB_CHIPCO_CLOCK_M2)); + div = 1; + } else { + if (cc->dev->id.revision >= 11) { + /* Fixed ALP clock */ + baud_base = 20000000; + div = 1; + /* Set the override bit so we don't divide it */ + chipco_write32(cc, SSB_CHIPCO_CORECTL, + SSB_CHIPCO_CORECTL_UARTCLK0); + } else if (cc->dev->id.revision >= 3) { + /* Internal backplane clock */ + baud_base = ssb_clockspeed(bus); + div = chipco_read32(cc, SSB_CHIPCO_CLKDIV) + & SSB_CHIPCO_CLKDIV_UART; + } else { + /* Fixed internal backplane clock */ + baud_base = 88000000; + div = 48; + } + + /* Clock source depends on strapping if UartClkOverride is unset */ + if ((cc->dev->id.revision > 0) && + !(chipco_read32(cc, SSB_CHIPCO_CORECTL) & SSB_CHIPCO_CORECTL_UARTCLK0)) { + if ((cc->capabilities & SSB_CHIPCO_CAP_UARTCLK) == + SSB_CHIPCO_CAP_UARTCLK_INT) { + /* Internal divided backplane clock */ + baud_base /= div; + } else { + /* Assume external clock of 1.8432 MHz */ + baud_base = 1843200; + } + } + } + + /* Determine the registers of the UARTs */ + n = (cc->capabilities & SSB_CHIPCO_CAP_NRUART); + for (i = 0; i < n; i++) { + void __iomem *cc_mmio; + void __iomem *uart_regs; + + cc_mmio = cc->dev->bus->mmio + (cc->dev->core_index * SSB_CORE_SIZE); + uart_regs = cc_mmio + SSB_CHIPCO_UART0_DATA; + /* Offset changed at after rev 0 */ + if (cc->dev->id.revision == 0) + uart_regs += (i * 8); + else + uart_regs += (i * 256); + + nr_ports++; + ports[i].regs = uart_regs; + ports[i].irq = irq; + ports[i].baud_base = baud_base; + ports[i].reg_shift = 0; + } + + return nr_ports; +} +#endif /* CONFIG_SSB_SERIAL */ diff --git a/target/linux/generic-2.6/files-2.6.23/drivers/ssb/driver_extif.c b/target/linux/generic-2.6/files-2.6.23/drivers/ssb/driver_extif.c new file mode 100644 index 0000000000..fe55eb8b03 --- /dev/null +++ b/target/linux/generic-2.6/files-2.6.23/drivers/ssb/driver_extif.c @@ -0,0 +1,129 @@ +/* + * Sonics Silicon Backplane + * Broadcom EXTIF core driver + * + * Copyright 2005, Broadcom Corporation + * Copyright 2006, 2007, Michael Buesch + * Copyright 2006, 2007, Felix Fietkau + * Copyright 2007, Aurelien Jarno + * + * Licensed under the GNU/GPL. See COPYING for details. + */ + +#include +#include +#include + +#include "ssb_private.h" + + +static inline u32 extif_read32(struct ssb_extif *extif, u16 offset) +{ + return ssb_read32(extif->dev, offset); +} + +static inline void extif_write32(struct ssb_extif *extif, u16 offset, u32 value) +{ + ssb_write32(extif->dev, offset, value); +} + +static inline void extif_write32_masked(struct ssb_extif *extif, u16 offset, + u32 mask, u32 value) +{ + value &= mask; + value |= extif_read32(extif, offset) & ~mask; + extif_write32(extif, offset, value); +} + +#ifdef CONFIG_SSB_SERIAL +static bool serial_exists(u8 *regs) +{ + u8 save_mcr, msr = 0; + + if (regs) { + save_mcr = regs[UART_MCR]; + regs[UART_MCR] = (UART_MCR_LOOP | UART_MCR_OUT2 | UART_MCR_RTS); + msr = regs[UART_MSR] & (UART_MSR_DCD | UART_MSR_RI + | UART_MSR_CTS | UART_MSR_DSR); + regs[UART_MCR] = save_mcr; + } + return (msr == (UART_MSR_DCD | UART_MSR_CTS)); +} + +int ssb_extif_serial_init(struct ssb_extif *extif, struct ssb_serial_port *ports) +{ + u32 i, nr_ports = 0; + + /* Disable GPIO interrupt initially */ + extif_write32(extif, SSB_EXTIF_GPIO_INTPOL, 0); + extif_write32(extif, SSB_EXTIF_GPIO_INTMASK, 0); + + for (i = 0; i < 2; i++) { + void __iomem *uart_regs; + + uart_regs = ioremap_nocache(SSB_EUART, 16); + if (uart_regs) { + uart_regs += (i * 8); + + if (serial_exists(uart_regs) && ports) { + extif_write32(extif, SSB_EXTIF_GPIO_INTMASK, 2); + + nr_ports++; + ports[i].regs = uart_regs; + ports[i].irq = 2; + ports[i].baud_base = 13500000; + ports[i].reg_shift = 0; + } + iounmap(uart_regs); + } + } + return nr_ports; +} +#endif /* CONFIG_SSB_SERIAL */ + +void ssb_extif_timing_init(struct ssb_extif *extif, unsigned long ns) +{ + u32 tmp; + + /* Initialize extif so we can get to the LEDs and external UART */ + extif_write32(extif, SSB_EXTIF_PROG_CFG, SSB_EXTCFG_EN); + + /* Set timing for the flash */ + tmp = DIV_ROUND_UP(10, ns) << SSB_PROG_WCNT_3_SHIFT; + tmp |= DIV_ROUND_UP(40, ns) << SSB_PROG_WCNT_1_SHIFT; + tmp |= DIV_ROUND_UP(120, ns); + extif_write32(extif, SSB_EXTIF_PROG_WAITCNT, tmp); + + /* Set programmable interface timing for external uart */ + tmp = DIV_ROUND_UP(10, ns) << SSB_PROG_WCNT_3_SHIFT; + tmp |= DIV_ROUND_UP(20, ns) << SSB_PROG_WCNT_2_SHIFT; + tmp |= DIV_ROUND_UP(100, ns) << SSB_PROG_WCNT_1_SHIFT; + tmp |= DIV_ROUND_UP(120, ns); + extif_write32(extif, SSB_EXTIF_PROG_WAITCNT, tmp); +} + +void ssb_extif_get_clockcontrol(struct ssb_extif *extif, + u32 *pll_type, u32 *n, u32 *m) +{ + *pll_type = SSB_PLLTYPE_1; + *n = extif_read32(extif, SSB_EXTIF_CLOCK_N); + *m = extif_read32(extif, SSB_EXTIF_CLOCK_SB); +} + +u32 ssb_extif_gpio_in(struct ssb_extif *extif, u32 mask) +{ + return extif_read32(extif, SSB_EXTIF_GPIO_IN) & mask; +} + +void ssb_extif_gpio_out(struct ssb_extif *extif, u32 mask, u32 value) +{ + return extif_write32_masked(extif, SSB_EXTIF_GPIO_OUT(0), + mask, value); +} + +void ssb_extif_gpio_outen(struct ssb_extif *extif, u32 mask, u32 value) +{ + return extif_write32_masked(extif, SSB_EXTIF_GPIO_OUTEN(0), + mask, value); +} + diff --git a/target/linux/generic-2.6/files-2.6.23/drivers/ssb/driver_mipscore.c b/target/linux/generic-2.6/files-2.6.23/drivers/ssb/driver_mipscore.c new file mode 100644 index 0000000000..a9e7eb45b2 --- /dev/null +++ b/target/linux/generic-2.6/files-2.6.23/drivers/ssb/driver_mipscore.c @@ -0,0 +1,225 @@ +/* + * Sonics Silicon Backplane + * Broadcom MIPS core driver + * + * Copyright 2005, Broadcom Corporation + * Copyright 2006, 2007, Michael Buesch + * + * Licensed under the GNU/GPL. See COPYING for details. + */ + +#include + +#include +#include +#include +#include + +#include "ssb_private.h" + + +static inline u32 mips_read32(struct ssb_mipscore *mcore, + u16 offset) +{ + return ssb_read32(mcore->dev, offset); +} + +static inline void mips_write32(struct ssb_mipscore *mcore, + u16 offset, + u32 value) +{ + ssb_write32(mcore->dev, offset, value); +} + +static const u32 ipsflag_irq_mask[] = { + 0, + SSB_IPSFLAG_IRQ1, + SSB_IPSFLAG_IRQ2, + SSB_IPSFLAG_IRQ3, + SSB_IPSFLAG_IRQ4, +}; + +static const u32 ipsflag_irq_shift[] = { + 0, + SSB_IPSFLAG_IRQ1_SHIFT, + SSB_IPSFLAG_IRQ2_SHIFT, + SSB_IPSFLAG_IRQ3_SHIFT, + SSB_IPSFLAG_IRQ4_SHIFT, +}; + +static inline u32 ssb_irqflag(struct ssb_device *dev) +{ + return ssb_read32(dev, SSB_TPSFLAG) & SSB_TPSFLAG_BPFLAG; +} + +/* Get the MIPS IRQ assignment for a specified device. + * If unassigned, 0 is returned. + */ +unsigned int ssb_mips_irq(struct ssb_device *dev) +{ + struct ssb_bus *bus = dev->bus; + u32 irqflag; + u32 ipsflag; + u32 tmp; + unsigned int irq; + + irqflag = ssb_irqflag(dev); + ipsflag = ssb_read32(bus->mipscore.dev, SSB_IPSFLAG); + for (irq = 1; irq <= 4; irq++) { + tmp = ((ipsflag & ipsflag_irq_mask[irq]) >> ipsflag_irq_shift[irq]); + if (tmp == irqflag) + break; + } + if (irq == 5) + irq = 0; + + return irq; +} + +static void clear_irq(struct ssb_bus *bus, unsigned int irq) +{ + struct ssb_device *dev = bus->mipscore.dev; + + /* Clear the IRQ in the MIPScore backplane registers */ + if (irq == 0) { + ssb_write32(dev, SSB_INTVEC, 0); + } else { + ssb_write32(dev, SSB_IPSFLAG, + ssb_read32(dev, SSB_IPSFLAG) | + ipsflag_irq_mask[irq]); + } +} + +static void set_irq(struct ssb_device *dev, unsigned int irq) +{ + unsigned int oldirq = ssb_mips_irq(dev); + struct ssb_bus *bus = dev->bus; + struct ssb_device *mdev = bus->mipscore.dev; + u32 irqflag = ssb_irqflag(dev); + + dev->irq = irq + 2; + + ssb_dprintk(KERN_INFO PFX + "set_irq: core 0x%04x, irq %d => %d\n", + dev->id.coreid, oldirq, irq); + /* clear the old irq */ + if (oldirq == 0) + ssb_write32(mdev, SSB_INTVEC, (~(1 << irqflag) & ssb_read32(mdev, SSB_INTVEC))); + else + clear_irq(bus, oldirq); + + /* assign the new one */ + if (irq == 0) { + ssb_write32(mdev, SSB_INTVEC, ((1 << irqflag) | ssb_read32(mdev, SSB_INTVEC))); + } else { + irqflag <<= ipsflag_irq_shift[irq]; + irqflag |= (ssb_read32(mdev, SSB_IPSFLAG) & ~ipsflag_irq_mask[irq]); + ssb_write32(mdev, SSB_IPSFLAG, irqflag); + } +} + +static void ssb_mips_serial_init(struct ssb_mipscore *mcore) +{ + struct ssb_bus *bus = mcore->dev->bus; + + if (bus->extif.dev) + mcore->nr_serial_ports = ssb_extif_serial_init(&bus->extif, mcore->serial_ports); + else if (bus->chipco.dev) + mcore->nr_serial_ports = ssb_chipco_serial_init(&bus->chipco, mcore->serial_ports); + else + mcore->nr_serial_ports = 0; +} + +static void ssb_mips_flash_detect(struct ssb_mipscore *mcore) +{ + struct ssb_bus *bus = mcore->dev->bus; + + mcore->flash_buswidth = 2; + if (bus->chipco.dev) { + mcore->flash_window = 0x1c000000; + mcore->flash_window_size = 0x02000000; + if ((ssb_read32(bus->chipco.dev, SSB_CHIPCO_FLASH_CFG) + & SSB_CHIPCO_CFG_DS16) == 0) + mcore->flash_buswidth = 1; + } else { + mcore->flash_window = 0x1fc00000; + mcore->flash_window_size = 0x00400000; + } +} + +u32 ssb_cpu_clock(struct ssb_mipscore *mcore) +{ + struct ssb_bus *bus = mcore->dev->bus; + u32 pll_type, n, m, rate = 0; + + if (bus->extif.dev) { + ssb_extif_get_clockcontrol(&bus->extif, &pll_type, &n, &m); + } else if (bus->chipco.dev) { + ssb_chipco_get_clockcpu(&bus->chipco, &pll_type, &n, &m); + } else + return 0; + + if ((pll_type == SSB_PLLTYPE_5) || (bus->chip_id == 0x5365)) { + rate = 200000000; + } else { + rate = ssb_calc_clock_rate(pll_type, n, m); + } + + if (pll_type == SSB_PLLTYPE_6) { + rate *= 2; + } + + return rate; +} + +void ssb_mipscore_init(struct ssb_mipscore *mcore) +{ + struct ssb_bus *bus; + struct ssb_device *dev; + unsigned long hz, ns; + unsigned int irq, i; + + if (!mcore->dev) + return; /* We don't have a MIPS core */ + + ssb_dprintk(KERN_INFO PFX "Initializing MIPS core...\n"); + + bus = mcore->dev->bus; + hz = ssb_clockspeed(bus); + if (!hz) + hz = 100000000; + ns = 1000000000 / hz; + + if (bus->extif.dev) + ssb_extif_timing_init(&bus->extif, ns); + else if (bus->chipco.dev) + ssb_chipco_timing_init(&bus->chipco, ns); + + /* Assign IRQs to all cores on the bus, start with irq line 2, because serial usually takes 1 */ + for (irq = 2, i = 0; i < bus->nr_devices; i++) { + dev = &(bus->devices[i]); + dev->irq = ssb_mips_irq(dev) + 2; + switch (dev->id.coreid) { + case SSB_DEV_USB11_HOST: + /* shouldn't need a separate irq line for non-4710, most of them have a proper + * external usb controller on the pci */ + if ((bus->chip_id == 0x4710) && (irq <= 4)) { + set_irq(dev, irq++); + break; + } + /* fallthrough */ + case SSB_DEV_PCI: + case SSB_DEV_ETHERNET: + case SSB_DEV_80211: + case SSB_DEV_USB20_HOST: + /* These devices get their own IRQ line if available, the rest goes on IRQ0 */ + if (irq <= 4) { + set_irq(dev, irq++); + break; + } + } + } + + ssb_mips_serial_init(mcore); + ssb_mips_flash_detect(mcore); +} diff --git a/target/linux/generic-2.6/files-2.6.23/drivers/ssb/driver_pcicore.c b/target/linux/generic-2.6/files-2.6.23/drivers/ssb/driver_pcicore.c new file mode 100644 index 0000000000..2faaa906d5 --- /dev/null +++ b/target/linux/generic-2.6/files-2.6.23/drivers/ssb/driver_pcicore.c @@ -0,0 +1,576 @@ +/* + * Sonics Silicon Backplane + * Broadcom PCI-core driver + * + * Copyright 2005, Broadcom Corporation + * Copyright 2006, 2007, Michael Buesch + * + * Licensed under the GNU/GPL. See COPYING for details. + */ + +#include +#include +#include + +#include "ssb_private.h" + + +static inline +u32 pcicore_read32(struct ssb_pcicore *pc, u16 offset) +{ + return ssb_read32(pc->dev, offset); +} + +static inline +void pcicore_write32(struct ssb_pcicore *pc, u16 offset, u32 value) +{ + ssb_write32(pc->dev, offset, value); +} + +/************************************************** + * Code for hostmode operation. + **************************************************/ + +#ifdef CONFIG_SSB_PCICORE_HOSTMODE + +#include +/* Probe a 32bit value on the bus and catch bus exceptions. + * Returns nonzero on a bus exception. + * This is MIPS specific */ +#define mips_busprobe32(val, addr) get_dbe((val), ((u32 *)(addr))) + +/* Assume one-hot slot wiring */ +#define SSB_PCI_SLOT_MAX 16 + +/* Global lock is OK, as we won't have more than one extpci anyway. */ +static DEFINE_SPINLOCK(cfgspace_lock); +/* Core to access the external PCI config space. Can only have one. */ +static struct ssb_pcicore *extpci_core; + +static u32 ssb_pcicore_pcibus_iobase = 0x100; +static u32 ssb_pcicore_pcibus_membase = SSB_PCI_DMA; + +int pcibios_plat_dev_init(struct pci_dev *d) +{ + struct resource *res; + int pos, size; + u32 *base; + + ssb_printk(KERN_INFO "PCI: Fixing up device %s\n", + pci_name(d)); + + /* Fix up resource bases */ + for (pos = 0; pos < 6; pos++) { + res = &d->resource[pos]; + if (res->flags & IORESOURCE_IO) + base = &ssb_pcicore_pcibus_iobase; + else + base = &ssb_pcicore_pcibus_membase; + if (res->end) { + size = res->end - res->start + 1; + if (*base & (size - 1)) + *base = (*base + size) & ~(size - 1); + res->start = *base; + res->end = res->start + size - 1; + *base += size; + pci_write_config_dword(d, PCI_BASE_ADDRESS_0 + (pos << 2), res->start); + } + /* Fix up PCI bridge BAR0 only */ + if (d->bus->number == 0 && PCI_SLOT(d->devfn) == 0) + break; + } + /* Fix up interrupt lines */ + d->irq = ssb_mips_irq(extpci_core->dev) + 2; + pci_write_config_byte(d, PCI_INTERRUPT_LINE, d->irq); + + return 0; +} + +static void __init ssb_fixup_pcibridge(struct pci_dev *dev) +{ + if (dev->bus->number != 0 || PCI_SLOT(dev->devfn) != 0) + return; + + ssb_printk(KERN_INFO "PCI: fixing up bridge\n"); + + /* Enable PCI bridge bus mastering and memory space */ + pci_set_master(dev); + pcibios_enable_device(dev, ~0); + + /* Enable PCI bridge BAR1 prefetch and burst */ + pci_write_config_dword(dev, SSB_BAR1_CONTROL, 3); + + /* Make sure our latency is high enough to handle the devices behind us */ + pci_write_config_byte(dev, PCI_LATENCY_TIMER, 0xa8); +} +DECLARE_PCI_FIXUP_EARLY(PCI_ANY_ID, PCI_ANY_ID, ssb_fixup_pcibridge); + +int __init pcibios_map_irq(const struct pci_dev *dev, u8 slot, u8 pin) +{ + return ssb_mips_irq(extpci_core->dev) + 2; +} + +static u32 get_cfgspace_addr(struct ssb_pcicore *pc, + unsigned int bus, unsigned int dev, + unsigned int func, unsigned int off) +{ + u32 addr = 0; + u32 tmp; + + if (unlikely(pc->cardbusmode && dev > 1)) + goto out; + if (bus == 0) { + /* Type 0 transaction */ + if (unlikely(dev >= SSB_PCI_SLOT_MAX)) + goto out; + /* Slide the window */ + tmp = SSB_PCICORE_SBTOPCI_CFG0; + tmp |= ((1 << (dev + 16)) & SSB_PCICORE_SBTOPCI1_MASK); + pcicore_write32(pc, SSB_PCICORE_SBTOPCI1, tmp); + /* Calculate the address */ + addr = SSB_PCI_CFG; + addr |= ((1 << (dev + 16)) & ~SSB_PCICORE_SBTOPCI1_MASK); + addr |= (func << 8); + addr |= (off & ~3); + } else { + /* Type 1 transaction */ + pcicore_write32(pc, SSB_PCICORE_SBTOPCI1, + SSB_PCICORE_SBTOPCI_CFG1); + /* Calculate the address */ + addr = SSB_PCI_CFG; + addr |= (bus << 16); + addr |= (dev << 11); + addr |= (func << 8); + addr |= (off & ~3); + } +out: + return addr; +} + +static int ssb_extpci_read_config(struct ssb_pcicore *pc, + unsigned int bus, unsigned int dev, + unsigned int func, unsigned int off, + void *buf, int len) +{ + int err = -EINVAL; + u32 addr, val; + void __iomem *mmio; + + SSB_WARN_ON(!pc->hostmode); + if (unlikely(len != 1 && len != 2 && len != 4)) + goto out; + addr = get_cfgspace_addr(pc, bus, dev, func, off); + if (unlikely(!addr)) + goto out; + err = -ENOMEM; + mmio = ioremap_nocache(addr, len); + if (!mmio) + goto out; + + if (mips_busprobe32(val, mmio)) { + val = 0xffffffff; + goto unmap; + } + + val = readl(mmio); + val >>= (8 * (off & 3)); + + switch (len) { + case 1: + *((u8 *)buf) = (u8)val; + break; + case 2: + *((u16 *)buf) = (u16)val; + break; + case 4: + *((u32 *)buf) = (u32)val; + break; + } + err = 0; +unmap: + iounmap(mmio); +out: + return err; +} + +static int ssb_extpci_write_config(struct ssb_pcicore *pc, + unsigned int bus, unsigned int dev, + unsigned int func, unsigned int off, + const void *buf, int len) +{ + int err = -EINVAL; + u32 addr, val = 0; + void __iomem *mmio; + + SSB_WARN_ON(!pc->hostmode); + if (unlikely(len != 1 && len != 2 && len != 4)) + goto out; + addr = get_cfgspace_addr(pc, bus, dev, func, off); + if (unlikely(!addr)) + goto out; + err = -ENOMEM; + mmio = ioremap_nocache(addr, len); + if (!mmio) + goto out; + + if (mips_busprobe32(val, mmio)) { + val = 0xffffffff; + goto unmap; + } + + switch (len) { + case 1: + val = readl(mmio); + val &= ~(0xFF << (8 * (off & 3))); + val |= *((const u8 *)buf) << (8 * (off & 3)); + break; + case 2: + val = readl(mmio); + val &= ~(0xFFFF << (8 * (off & 3))); + val |= *((const u16 *)buf) << (8 * (off & 3)); + break; + case 4: + val = *((const u32 *)buf); + break; + } + writel(val, mmio); + + err = 0; +unmap: + iounmap(mmio); +out: + return err; +} + +static int ssb_pcicore_read_config(struct pci_bus *bus, unsigned int devfn, + int reg, int size, u32 *val) +{ + unsigned long flags; + int err; + + spin_lock_irqsave(&cfgspace_lock, flags); + err = ssb_extpci_read_config(extpci_core, bus->number, PCI_SLOT(devfn), + PCI_FUNC(devfn), reg, val, size); + spin_unlock_irqrestore(&cfgspace_lock, flags); + + return err ? PCIBIOS_DEVICE_NOT_FOUND : PCIBIOS_SUCCESSFUL; +} + +static int ssb_pcicore_write_config(struct pci_bus *bus, unsigned int devfn, + int reg, int size, u32 val) +{ + unsigned long flags; + int err; + + spin_lock_irqsave(&cfgspace_lock, flags); + err = ssb_extpci_write_config(extpci_core, bus->number, PCI_SLOT(devfn), + PCI_FUNC(devfn), reg, &val, size); + spin_unlock_irqrestore(&cfgspace_lock, flags); + + return err ? PCIBIOS_DEVICE_NOT_FOUND : PCIBIOS_SUCCESSFUL; +} + +static struct pci_ops ssb_pcicore_pciops = { + .read = ssb_pcicore_read_config, + .write = ssb_pcicore_write_config, +}; + +static struct resource ssb_pcicore_mem_resource = { + .name = "SSB PCIcore external memory", + .start = SSB_PCI_DMA, + .end = SSB_PCI_DMA + SSB_PCI_DMA_SZ - 1, + .flags = IORESOURCE_MEM, +}; + +static struct resource ssb_pcicore_io_resource = { + .name = "SSB PCIcore external I/O", + .start = 0x100, + .end = 0x7FF, + .flags = IORESOURCE_IO, +}; + +static struct pci_controller ssb_pcicore_controller = { + .pci_ops = &ssb_pcicore_pciops, + .io_resource = &ssb_pcicore_io_resource, + .mem_resource = &ssb_pcicore_mem_resource, + .mem_offset = 0x24000000, +}; + +static void ssb_pcicore_init_hostmode(struct ssb_pcicore *pc) +{ + u32 val; + + if (WARN_ON(extpci_core)) + return; + extpci_core = pc; + + ssb_dprintk(KERN_INFO PFX "PCIcore in host mode found\n"); + /* Reset devices on the external PCI bus */ + val = SSB_PCICORE_CTL_RST_OE; + val |= SSB_PCICORE_CTL_CLK_OE; + pcicore_write32(pc, SSB_PCICORE_CTL, val); + val |= SSB_PCICORE_CTL_CLK; /* Clock on */ + pcicore_write32(pc, SSB_PCICORE_CTL, val); + udelay(150); /* Assertion time demanded by the PCI standard */ + val |= SSB_PCICORE_CTL_RST; /* Deassert RST# */ + pcicore_write32(pc, SSB_PCICORE_CTL, val); + val = SSB_PCICORE_ARBCTL_INTERN; + pcicore_write32(pc, SSB_PCICORE_ARBCTL, val); + udelay(1); /* Assertion time demanded by the PCI standard */ + + /*TODO cardbus mode */ + + /* 64MB I/O window */ + pcicore_write32(pc, SSB_PCICORE_SBTOPCI0, + SSB_PCICORE_SBTOPCI_IO); + /* 64MB config space */ + pcicore_write32(pc, SSB_PCICORE_SBTOPCI1, + SSB_PCICORE_SBTOPCI_CFG0); + /* 1GB memory window */ + pcicore_write32(pc, SSB_PCICORE_SBTOPCI2, + SSB_PCICORE_SBTOPCI_MEM | SSB_PCI_DMA); + + /* Enable PCI bridge BAR0 prefetch and burst */ + val = PCI_COMMAND_MASTER | PCI_COMMAND_MEMORY; + ssb_extpci_write_config(pc, 0, 0, 0, PCI_COMMAND, &val, 2); + /* Clear error conditions */ + val = 0; + ssb_extpci_write_config(pc, 0, 0, 0, PCI_STATUS, &val, 2); + + /* Enable PCI interrupts */ + pcicore_write32(pc, SSB_PCICORE_IMASK, + SSB_PCICORE_IMASK_INTA); + + /* Ok, ready to run, register it to the system. + * The following needs change, if we want to port hostmode + * to non-MIPS platform. */ + set_io_port_base((unsigned long)ioremap_nocache(SSB_PCI_MEM, 0x04000000)); + /* Give some time to the PCI controller to configure itself with the new + * values. Not waiting at this point causes crashes of the machine. */ + mdelay(10); + register_pci_controller(&ssb_pcicore_controller); +} + +static int pcicore_is_in_hostmode(struct ssb_pcicore *pc) +{ + struct ssb_bus *bus = pc->dev->bus; + u16 chipid_top; + u32 tmp; + + chipid_top = (bus->chip_id & 0xFF00); + if (chipid_top != 0x4700 && + chipid_top != 0x5300) + return 0; + + if (bus->sprom.r1.boardflags_lo & SSB_PCICORE_BFL_NOPCI) + return 0; + + /* The 200-pin BCM4712 package does not bond out PCI. Even when + * PCI is bonded out, some boards may leave the pins floating. */ + if (bus->chip_id == 0x4712) { + if (bus->chip_package == SSB_CHIPPACK_BCM4712S) + return 0; + if (bus->chip_package == SSB_CHIPPACK_BCM4712M) + return 0; + } + if (bus->chip_id == 0x5350) + return 0; + + return !mips_busprobe32(tmp, (bus->mmio + (pc->dev->core_index * SSB_CORE_SIZE))); +} +#endif /* CONFIG_SSB_PCICORE_HOSTMODE */ + + +/************************************************** + * Generic and Clientmode operation code. + **************************************************/ + +static void ssb_pcicore_init_clientmode(struct ssb_pcicore *pc) +{ + /* Disable PCI interrupts. */ + ssb_write32(pc->dev, SSB_INTVEC, 0); +} + +void ssb_pcicore_init(struct ssb_pcicore *pc) +{ + struct ssb_device *dev = pc->dev; + struct ssb_bus *bus; + + if (!dev) + return; + bus = dev->bus; + if (!ssb_device_is_enabled(dev)) + ssb_device_enable(dev, 0); + +#ifdef CONFIG_SSB_PCICORE_HOSTMODE + pc->hostmode = pcicore_is_in_hostmode(pc); + if (pc->hostmode) + ssb_pcicore_init_hostmode(pc); +#endif /* CONFIG_SSB_PCICORE_HOSTMODE */ + if (!pc->hostmode) + ssb_pcicore_init_clientmode(pc); +} + +static u32 ssb_pcie_read(struct ssb_pcicore *pc, u32 address) +{ + pcicore_write32(pc, 0x130, address); + return pcicore_read32(pc, 0x134); +} + +static void ssb_pcie_write(struct ssb_pcicore *pc, u32 address, u32 data) +{ + pcicore_write32(pc, 0x130, address); + pcicore_write32(pc, 0x134, data); +} + +static void ssb_pcie_mdio_write(struct ssb_pcicore *pc, u8 device, + u8 address, u16 data) +{ + const u16 mdio_control = 0x128; + const u16 mdio_data = 0x12C; + u32 v; + int i; + + v = 0x80; /* Enable Preamble Sequence */ + v |= 0x2; /* MDIO Clock Divisor */ + pcicore_write32(pc, mdio_control, v); + + v = (1 << 30); /* Start of Transaction */ + v |= (1 << 28); /* Write Transaction */ + v |= (1 << 17); /* Turnaround */ + v |= (u32)device << 22; + v |= (u32)address << 18; + v |= data; + pcicore_write32(pc, mdio_data, v); + /* Wait for the device to complete the transaction */ + udelay(10); + for (i = 0; i < 10; i++) { + v = pcicore_read32(pc, mdio_control); + if (v & 0x100 /* Trans complete */) + break; + msleep(1); + } + pcicore_write32(pc, mdio_control, 0); +} + +static void ssb_broadcast_value(struct ssb_device *dev, + u32 address, u32 data) +{ + /* This is used for both, PCI and ChipCommon core, so be careful. */ + BUILD_BUG_ON(SSB_PCICORE_BCAST_ADDR != SSB_CHIPCO_BCAST_ADDR); + BUILD_BUG_ON(SSB_PCICORE_BCAST_DATA != SSB_CHIPCO_BCAST_DATA); + + ssb_write32(dev, SSB_PCICORE_BCAST_ADDR, address); + ssb_read32(dev, SSB_PCICORE_BCAST_ADDR); /* flush */ + ssb_write32(dev, SSB_PCICORE_BCAST_DATA, data); + ssb_read32(dev, SSB_PCICORE_BCAST_DATA); /* flush */ +} + +static void ssb_commit_settings(struct ssb_bus *bus) +{ + struct ssb_device *dev; + + dev = bus->chipco.dev ? bus->chipco.dev : bus->pcicore.dev; + if (WARN_ON(!dev)) + return; + /* This forces an update of the cached registers. */ + ssb_broadcast_value(dev, 0xFD8, 0); +} + +int ssb_pcicore_dev_irqvecs_enable(struct ssb_pcicore *pc, + struct ssb_device *dev) +{ + struct ssb_device *pdev = pc->dev; + struct ssb_bus *bus; + int err = 0; + u32 tmp; + + might_sleep(); + + if (!pdev) + goto out; + bus = pdev->bus; + + /* Enable interrupts for this device. */ + if (bus->host_pci && + ((pdev->id.revision >= 6) || (pdev->id.coreid == SSB_DEV_PCIE))) { + u32 coremask; + + /* Calculate the "coremask" for the device. */ + coremask = (1 << dev->core_index); + + err = pci_read_config_dword(bus->host_pci, SSB_PCI_IRQMASK, &tmp); + if (err) + goto out; + tmp |= coremask << 8; + err = pci_write_config_dword(bus->host_pci, SSB_PCI_IRQMASK, tmp); + if (err) + goto out; + } else { + u32 intvec; + + intvec = ssb_read32(pdev, SSB_INTVEC); + if ((bus->chip_id & 0xFF00) == 0x4400) { + /* Workaround: On the BCM44XX the BPFLAG routing + * bit is wrong. Use a hardcoded constant. */ + intvec |= 0x00000002; + } else { + tmp = ssb_read32(dev, SSB_TPSFLAG); + tmp &= SSB_TPSFLAG_BPFLAG; + intvec |= tmp; + } + ssb_write32(pdev, SSB_INTVEC, intvec); + } + + /* Setup PCIcore operation. */ + if (pc->setup_done) + goto out; + if (pdev->id.coreid == SSB_DEV_PCI) { + tmp = pcicore_read32(pc, SSB_PCICORE_SBTOPCI2); + tmp |= SSB_PCICORE_SBTOPCI_PREF; + tmp |= SSB_PCICORE_SBTOPCI_BURST; + pcicore_write32(pc, SSB_PCICORE_SBTOPCI2, tmp); + + if (pdev->id.revision < 5) { + tmp = ssb_read32(pdev, SSB_IMCFGLO); + tmp &= ~SSB_IMCFGLO_SERTO; + tmp |= 2; + tmp &= ~SSB_IMCFGLO_REQTO; + tmp |= 3 << SSB_IMCFGLO_REQTO_SHIFT; + ssb_write32(pdev, SSB_IMCFGLO, tmp); + ssb_commit_settings(bus); + } else if (pdev->id.revision >= 11) { + tmp = pcicore_read32(pc, SSB_PCICORE_SBTOPCI2); + tmp |= SSB_PCICORE_SBTOPCI_MRM; + pcicore_write32(pc, SSB_PCICORE_SBTOPCI2, tmp); + } + } else { + WARN_ON(pdev->id.coreid != SSB_DEV_PCIE); + //TODO: Better make defines for all these magic PCIE values. + if ((pdev->id.revision == 0) || (pdev->id.revision == 1)) { + /* TLP Workaround register. */ + tmp = ssb_pcie_read(pc, 0x4); + tmp |= 0x8; + ssb_pcie_write(pc, 0x4, tmp); + } + if (pdev->id.revision == 0) { + const u8 serdes_rx_device = 0x1F; + + ssb_pcie_mdio_write(pc, serdes_rx_device, + 2 /* Timer */, 0x8128); + ssb_pcie_mdio_write(pc, serdes_rx_device, + 6 /* CDR */, 0x0100); + ssb_pcie_mdio_write(pc, serdes_rx_device, + 7 /* CDR BW */, 0x1466); + } else if (pdev->id.revision == 1) { + /* DLLP Link Control register. */ + tmp = ssb_pcie_read(pc, 0x100); + tmp |= 0x40; + ssb_pcie_write(pc, 0x100, tmp); + } + } + pc->setup_done = 1; +out: + return err; +} +EXPORT_SYMBOL(ssb_pcicore_dev_irqvecs_enable); diff --git a/target/linux/generic-2.6/files-2.6.23/drivers/ssb/main.c b/target/linux/generic-2.6/files-2.6.23/drivers/ssb/main.c new file mode 100644 index 0000000000..9028ed5715 --- /dev/null +++ b/target/linux/generic-2.6/files-2.6.23/drivers/ssb/main.c @@ -0,0 +1,1169 @@ +/* + * Sonics Silicon Backplane + * Subsystem core + * + * Copyright 2005, Broadcom Corporation + * Copyright 2006, 2007, Michael Buesch + * + * Licensed under the GNU/GPL. See COPYING for details. + */ + +#include "ssb_private.h" + +#include +#include +#include +#include +#include +#include + +#include +#include +#include +#include + + +MODULE_DESCRIPTION("Sonics Silicon Backplane driver"); +MODULE_LICENSE("GPL"); + + +/* Temporary list of yet-to-be-attached buses */ +static LIST_HEAD(attach_queue); +/* List if running buses */ +static LIST_HEAD(buses); +/* Software ID counter */ +static unsigned int next_busnumber; +/* buses_mutes locks the two buslists and the next_busnumber. + * Don't lock this directly, but use ssb_buses_[un]lock() below. */ +static DEFINE_MUTEX(buses_mutex); + +/* There are differences in the codeflow, if the bus is + * initialized from early boot, as various needed services + * are not available early. This is a mechanism to delay + * these initializations to after early boot has finished. + * It's also used to avoid mutex locking, as that's not + * available and needed early. */ +static bool ssb_is_early_boot = 1; + +static void ssb_buses_lock(void); +static void ssb_buses_unlock(void); + + +#ifdef CONFIG_SSB_PCIHOST +struct ssb_bus *ssb_pci_dev_to_bus(struct pci_dev *pdev) +{ + struct ssb_bus *bus; + + ssb_buses_lock(); + list_for_each_entry(bus, &buses, list) { + if (bus->bustype == SSB_BUSTYPE_PCI && + bus->host_pci == pdev) + goto found; + } + bus = NULL; +found: + ssb_buses_unlock(); + + return bus; +} +#endif /* CONFIG_SSB_PCIHOST */ + +static struct ssb_device *ssb_device_get(struct ssb_device *dev) +{ + if (dev) + get_device(dev->dev); + return dev; +} + +static void ssb_device_put(struct ssb_device *dev) +{ + if (dev) + put_device(dev->dev); +} + +static int ssb_bus_resume(struct ssb_bus *bus) +{ + int err; + + ssb_pci_xtal(bus, SSB_GPIO_XTAL | SSB_GPIO_PLL, 1); + err = ssb_pcmcia_init(bus); + if (err) { + /* No need to disable XTAL, as we don't have one on PCMCIA. */ + return err; + } + ssb_chipco_resume(&bus->chipco); + + return 0; +} + +static int ssb_device_resume(struct device *dev) +{ + struct ssb_device *ssb_dev = dev_to_ssb_dev(dev); + struct ssb_driver *ssb_drv; + struct ssb_bus *bus; + int err = 0; + + bus = ssb_dev->bus; + if (bus->suspend_cnt == bus->nr_devices) { + err = ssb_bus_resume(bus); + if (err) + return err; + } + bus->suspend_cnt--; + if (dev->driver) { + ssb_drv = drv_to_ssb_drv(dev->driver); + if (ssb_drv && ssb_drv->resume) + err = ssb_drv->resume(ssb_dev); + if (err) + goto out; + } +out: + return err; +} + +static void ssb_bus_suspend(struct ssb_bus *bus, pm_message_t state) +{ + ssb_chipco_suspend(&bus->chipco, state); + ssb_pci_xtal(bus, SSB_GPIO_XTAL | SSB_GPIO_PLL, 0); + + /* Reset HW state information in memory, so that HW is + * completely reinitialized on resume. */ + bus->mapped_device = NULL; +#ifdef CONFIG_SSB_DRIVER_PCICORE + bus->pcicore.setup_done = 0; +#endif +#ifdef CONFIG_SSB_DEBUG + bus->powered_up = 0; +#endif +} + +static int ssb_device_suspend(struct device *dev, pm_message_t state) +{ + struct ssb_device *ssb_dev = dev_to_ssb_dev(dev); + struct ssb_driver *ssb_drv; + struct ssb_bus *bus; + int err = 0; + + if (dev->driver) { + ssb_drv = drv_to_ssb_drv(dev->driver); + if (ssb_drv && ssb_drv->suspend) + err = ssb_drv->suspend(ssb_dev, state); + if (err) + goto out; + } + + bus = ssb_dev->bus; + bus->suspend_cnt++; + if (bus->suspend_cnt == bus->nr_devices) { + /* All devices suspended. Shutdown the bus. */ + ssb_bus_suspend(bus, state); + } + +out: + return err; +} + +#ifdef CONFIG_SSB_PCIHOST +int ssb_devices_freeze(struct ssb_bus *bus) +{ + struct ssb_device *dev; + struct ssb_driver *drv; + int err = 0; + int i; + pm_message_t state = PMSG_FREEZE; + + /* First check that we are capable to freeze all devices. */ + for (i = 0; i < bus->nr_devices; i++) { + dev = &(bus->devices[i]); + if (!dev->dev || + !dev->dev->driver || + !device_is_registered(dev->dev)) + continue; + drv = drv_to_ssb_drv(dev->dev->driver); + if (!drv) + continue; + if (!drv->suspend) { + /* Nope, can't suspend this one. */ + return -EOPNOTSUPP; + } + } + /* Now suspend all devices */ + for (i = 0; i < bus->nr_devices; i++) { + dev = &(bus->devices[i]); + if (!dev->dev || + !dev->dev->driver || + !device_is_registered(dev->dev)) + continue; + drv = drv_to_ssb_drv(dev->dev->driver); + if (!drv) + continue; + err = drv->suspend(dev, state); + if (err) { + ssb_printk(KERN_ERR PFX "Failed to freeze device %s\n", + dev->dev->bus_id); + goto err_unwind; + } + } + + return 0; +err_unwind: + for (i--; i >= 0; i--) { + dev = &(bus->devices[i]); + if (!dev->dev || + !dev->dev->driver || + !device_is_registered(dev->dev)) + continue; + drv = drv_to_ssb_drv(dev->dev->driver); + if (!drv) + continue; + if (drv->resume) + drv->resume(dev); + } + return err; +} + +int ssb_devices_thaw(struct ssb_bus *bus) +{ + struct ssb_device *dev; + struct ssb_driver *drv; + int err; + int i; + + for (i = 0; i < bus->nr_devices; i++) { + dev = &(bus->devices[i]); + if (!dev->dev || + !dev->dev->driver || + !device_is_registered(dev->dev)) + continue; + drv = drv_to_ssb_drv(dev->dev->driver); + if (!drv) + continue; + if (SSB_WARN_ON(!drv->resume)) + continue; + err = drv->resume(dev); + if (err) { + ssb_printk(KERN_ERR PFX "Failed to thaw device %s\n", + dev->dev->bus_id); + } + } + + return 0; +} +#endif /* CONFIG_SSB_PCIHOST */ + +static void ssb_device_shutdown(struct device *dev) +{ + struct ssb_device *ssb_dev = dev_to_ssb_dev(dev); + struct ssb_driver *ssb_drv; + + if (!dev->driver) + return; + ssb_drv = drv_to_ssb_drv(dev->driver); + if (ssb_drv && ssb_drv->shutdown) + ssb_drv->shutdown(ssb_dev); +} + +static int ssb_device_remove(struct device *dev) +{ + struct ssb_device *ssb_dev = dev_to_ssb_dev(dev); + struct ssb_driver *ssb_drv = drv_to_ssb_drv(dev->driver); + + if (ssb_drv && ssb_drv->remove) + ssb_drv->remove(ssb_dev); + ssb_device_put(ssb_dev); + + return 0; +} + +static int ssb_device_probe(struct device *dev) +{ + struct ssb_device *ssb_dev = dev_to_ssb_dev(dev); + struct ssb_driver *ssb_drv = drv_to_ssb_drv(dev->driver); + int err = 0; + + ssb_device_get(ssb_dev); + if (ssb_drv && ssb_drv->probe) + err = ssb_drv->probe(ssb_dev, &ssb_dev->id); + if (err) + ssb_device_put(ssb_dev); + + return err; +} + +static int ssb_match_devid(const struct ssb_device_id *tabid, + const struct ssb_device_id *devid) +{ + if ((tabid->vendor != devid->vendor) && + tabid->vendor != SSB_ANY_VENDOR) + return 0; + if ((tabid->coreid != devid->coreid) && + tabid->coreid != SSB_ANY_ID) + return 0; + if ((tabid->revision != devid->revision) && + tabid->revision != SSB_ANY_REV) + return 0; + return 1; +} + +static int ssb_bus_match(struct device *dev, struct device_driver *drv) +{ + struct ssb_device *ssb_dev = dev_to_ssb_dev(dev); + struct ssb_driver *ssb_drv = drv_to_ssb_drv(drv); + const struct ssb_device_id *id; + + for (id = ssb_drv->id_table; + id->vendor || id->coreid || id->revision; + id++) { + if (ssb_match_devid(id, &ssb_dev->id)) + return 1; /* found */ + } + + return 0; +} + +static int ssb_device_uevent(struct device *dev, struct kobj_uevent_env *env) +{ + struct ssb_device *ssb_dev = dev_to_ssb_dev(dev); + + if (!dev) + return -ENODEV; + + return add_uevent_var(env, + "MODALIAS=ssb:v%04Xid%04Xrev%02X", + ssb_dev->id.vendor, ssb_dev->id.coreid, + ssb_dev->id.revision); +} + +static struct bus_type ssb_bustype = { + .name = "ssb", + .match = ssb_bus_match, + .probe = ssb_device_probe, + .remove = ssb_device_remove, + .shutdown = ssb_device_shutdown, + .suspend = ssb_device_suspend, + .resume = ssb_device_resume, + .uevent = ssb_device_uevent, +}; + +static void ssb_buses_lock(void) +{ + /* See the comment at the ssb_is_early_boot definition */ + if (!ssb_is_early_boot) + mutex_lock(&buses_mutex); +} + +static void ssb_buses_unlock(void) +{ + /* See the comment at the ssb_is_early_boot definition */ + if (!ssb_is_early_boot) + mutex_unlock(&buses_mutex); +} + +static void ssb_devices_unregister(struct ssb_bus *bus) +{ + struct ssb_device *sdev; + int i; + + for (i = bus->nr_devices - 1; i >= 0; i--) { + sdev = &(bus->devices[i]); + if (sdev->dev) + device_unregister(sdev->dev); + } +} + +void ssb_bus_unregister(struct ssb_bus *bus) +{ + ssb_buses_lock(); + ssb_devices_unregister(bus); + list_del(&bus->list); + ssb_buses_unlock(); + + /* ssb_pcmcia_exit(bus); */ + ssb_pci_exit(bus); + ssb_iounmap(bus); +} +EXPORT_SYMBOL(ssb_bus_unregister); + +static void ssb_release_dev(struct device *dev) +{ + struct __ssb_dev_wrapper *devwrap; + + devwrap = container_of(dev, struct __ssb_dev_wrapper, dev); + kfree(devwrap); +} + +static int ssb_devices_register(struct ssb_bus *bus) +{ + struct ssb_device *sdev; + struct device *dev; + struct __ssb_dev_wrapper *devwrap; + int i, err = 0; + int dev_idx = 0; + + for (i = 0; i < bus->nr_devices; i++) { + sdev = &(bus->devices[i]); + + /* We don't register SSB-system devices to the kernel, + * as the drivers for them are built into SSB. */ + switch (sdev->id.coreid) { + case SSB_DEV_CHIPCOMMON: + case SSB_DEV_PCI: + case SSB_DEV_PCIE: + case SSB_DEV_PCMCIA: + case SSB_DEV_MIPS: + case SSB_DEV_MIPS_3302: + case SSB_DEV_EXTIF: + continue; + } + + devwrap = kzalloc(sizeof(*devwrap), GFP_KERNEL); + if (!devwrap) { + ssb_printk(KERN_ERR PFX + "Could not allocate device\n"); + err = -ENOMEM; + goto error; + } + dev = &devwrap->dev; + devwrap->sdev = sdev; + + dev->release = ssb_release_dev; + dev->bus = &ssb_bustype; + snprintf(dev->bus_id, sizeof(dev->bus_id), + "ssb%u:%d", bus->busnumber, dev_idx); + + switch (bus->bustype) { + case SSB_BUSTYPE_PCI: +#ifdef CONFIG_SSB_PCIHOST + sdev->irq = bus->host_pci->irq; + dev->parent = &bus->host_pci->dev; +#endif + break; + case SSB_BUSTYPE_PCMCIA: +#ifdef CONFIG_SSB_PCMCIAHOST + sdev->irq = bus->host_pcmcia->irq.AssignedIRQ; + dev->parent = &bus->host_pcmcia->dev; +#endif + break; + case SSB_BUSTYPE_SSB: + break; + } + + sdev->dev = dev; + err = device_register(dev); + if (err) { + ssb_printk(KERN_ERR PFX + "Could not register %s\n", + dev->bus_id); + /* Set dev to NULL to not unregister + * dev on error unwinding. */ + sdev->dev = NULL; + kfree(devwrap); + goto error; + } + dev_idx++; + } + + return 0; +error: + /* Unwind the already registered devices. */ + ssb_devices_unregister(bus); + return err; +} + +/* Needs ssb_buses_lock() */ +static int ssb_attach_queued_buses(void) +{ + struct ssb_bus *bus, *n; + int err = 0; + int drop_them_all = 0; + + list_for_each_entry_safe(bus, n, &attach_queue, list) { + if (drop_them_all) { + list_del(&bus->list); + continue; + } + /* Can't init the PCIcore in ssb_bus_register(), as that + * is too early in boot for embedded systems + * (no udelay() available). So do it here in attach stage. + */ + err = ssb_bus_powerup(bus, 0); + if (err) + goto error; + ssb_pcicore_init(&bus->pcicore); + ssb_bus_may_powerdown(bus); + + err = ssb_devices_register(bus); +error: + if (err) { + drop_them_all = 1; + list_del(&bus->list); + continue; + } + list_move_tail(&bus->list, &buses); + } + + return err; +} + +static u16 ssb_ssb_read16(struct ssb_device *dev, u16 offset) +{ + struct ssb_bus *bus = dev->bus; + + offset += dev->core_index * SSB_CORE_SIZE; + return readw(bus->mmio + offset); +} + +static u32 ssb_ssb_read32(struct ssb_device *dev, u16 offset) +{ + struct ssb_bus *bus = dev->bus; + + offset += dev->core_index * SSB_CORE_SIZE; + return readl(bus->mmio + offset); +} + +static void ssb_ssb_write16(struct ssb_device *dev, u16 offset, u16 value) +{ + struct ssb_bus *bus = dev->bus; + + offset += dev->core_index * SSB_CORE_SIZE; + writew(value, bus->mmio + offset); +} + +static void ssb_ssb_write32(struct ssb_device *dev, u16 offset, u32 value) +{ + struct ssb_bus *bus = dev->bus; + + offset += dev->core_index * SSB_CORE_SIZE; + writel(value, bus->mmio + offset); +} + +/* Ops for the plain SSB bus without a host-device (no PCI or PCMCIA). */ +static const struct ssb_bus_ops ssb_ssb_ops = { + .read16 = ssb_ssb_read16, + .read32 = ssb_ssb_read32, + .write16 = ssb_ssb_write16, + .write32 = ssb_ssb_write32, +}; + +static int ssb_fetch_invariants(struct ssb_bus *bus, + ssb_invariants_func_t get_invariants) +{ + struct ssb_init_invariants iv; + int err; + + memset(&iv, 0, sizeof(iv)); + err = get_invariants(bus, &iv); + if (err) + goto out; + memcpy(&bus->boardinfo, &iv.boardinfo, sizeof(iv.boardinfo)); + memcpy(&bus->sprom, &iv.sprom, sizeof(iv.sprom)); +out: + return err; +} + +static int ssb_bus_register(struct ssb_bus *bus, + ssb_invariants_func_t get_invariants, + unsigned long baseaddr) +{ + int err; + + spin_lock_init(&bus->bar_lock); + INIT_LIST_HEAD(&bus->list); + + /* Powerup the bus */ + err = ssb_pci_xtal(bus, SSB_GPIO_XTAL | SSB_GPIO_PLL, 1); + if (err) + goto out; + ssb_buses_lock(); + bus->busnumber = next_busnumber; + /* Scan for devices (cores) */ + err = ssb_bus_scan(bus, baseaddr); + if (err) + goto err_disable_xtal; + + /* Init PCI-host device (if any) */ + err = ssb_pci_init(bus); + if (err) + goto err_unmap; + /* Init PCMCIA-host device (if any) */ + err = ssb_pcmcia_init(bus); + if (err) + goto err_pci_exit; + + /* Initialize basic system devices (if available) */ + err = ssb_bus_powerup(bus, 0); + if (err) + goto err_pcmcia_exit; + ssb_chipcommon_init(&bus->chipco); + ssb_mipscore_init(&bus->mipscore); + err = ssb_fetch_invariants(bus, get_invariants); + if (err) { + ssb_bus_may_powerdown(bus); + goto err_pcmcia_exit; + } + ssb_bus_may_powerdown(bus); + + /* Queue it for attach. + * See the comment at the ssb_is_early_boot definition. */ + list_add_tail(&bus->list, &attach_queue); + if (!ssb_is_early_boot) { + /* This is not early boot, so we must attach the bus now */ + err = ssb_attach_queued_buses(); + if (err) + goto err_dequeue; + } + next_busnumber++; + ssb_buses_unlock(); + +out: + return err; + +err_dequeue: + list_del(&bus->list); +err_pcmcia_exit: +/* ssb_pcmcia_exit(bus); */ +err_pci_exit: + ssb_pci_exit(bus); +err_unmap: + ssb_iounmap(bus); +err_disable_xtal: + ssb_buses_unlock(); + ssb_pci_xtal(bus, SSB_GPIO_XTAL | SSB_GPIO_PLL, 0); + return err; +} + +#ifdef CONFIG_SSB_PCIHOST +int ssb_bus_pcibus_register(struct ssb_bus *bus, + struct pci_dev *host_pci) +{ + int err; + + bus->bustype = SSB_BUSTYPE_PCI; + bus->host_pci = host_pci; + bus->ops = &ssb_pci_ops; + + err = ssb_bus_register(bus, ssb_pci_get_invariants, 0); + if (!err) { + ssb_printk(KERN_INFO PFX "Sonics Silicon Backplane found on " + "PCI device %s\n", host_pci->dev.bus_id); + } + + return err; +} +EXPORT_SYMBOL(ssb_bus_pcibus_register); +#endif /* CONFIG_SSB_PCIHOST */ + +#ifdef CONFIG_SSB_PCMCIAHOST +int ssb_bus_pcmciabus_register(struct ssb_bus *bus, + struct pcmcia_device *pcmcia_dev, + unsigned long baseaddr) +{ + int err; + + bus->bustype = SSB_BUSTYPE_PCMCIA; + bus->host_pcmcia = pcmcia_dev; + bus->ops = &ssb_pcmcia_ops; + + err = ssb_bus_register(bus, ssb_pcmcia_get_invariants, baseaddr); + if (!err) { + ssb_printk(KERN_INFO PFX "Sonics Silicon Backplane found on " + "PCMCIA device %s\n", pcmcia_dev->devname); + } + + return err; +} +EXPORT_SYMBOL(ssb_bus_pcmciabus_register); +#endif /* CONFIG_SSB_PCMCIAHOST */ + +int ssb_bus_ssbbus_register(struct ssb_bus *bus, + unsigned long baseaddr, + ssb_invariants_func_t get_invariants) +{ + int err; + + bus->bustype = SSB_BUSTYPE_SSB; + bus->ops = &ssb_ssb_ops; + + err = ssb_bus_register(bus, get_invariants, baseaddr); + if (!err) { + ssb_printk(KERN_INFO PFX "Sonics Silicon Backplane found at " + "address 0x%08lX\n", baseaddr); + } + + return err; +} + +int __ssb_driver_register(struct ssb_driver *drv, struct module *owner) +{ + drv->drv.name = drv->name; + drv->drv.bus = &ssb_bustype; + drv->drv.owner = owner; + + return driver_register(&drv->drv); +} +EXPORT_SYMBOL(__ssb_driver_register); + +void ssb_driver_unregister(struct ssb_driver *drv) +{ + driver_unregister(&drv->drv); +} +EXPORT_SYMBOL(ssb_driver_unregister); + +void ssb_set_devtypedata(struct ssb_device *dev, void *data) +{ + struct ssb_bus *bus = dev->bus; + struct ssb_device *ent; + int i; + + for (i = 0; i < bus->nr_devices; i++) { + ent = &(bus->devices[i]); + if (ent->id.vendor != dev->id.vendor) + continue; + if (ent->id.coreid != dev->id.coreid) + continue; + + ent->devtypedata = data; + } +} +EXPORT_SYMBOL(ssb_set_devtypedata); + +static u32 clkfactor_f6_resolve(u32 v) +{ + /* map the magic values */ + switch (v) { + case SSB_CHIPCO_CLK_F6_2: + return 2; + case SSB_CHIPCO_CLK_F6_3: + return 3; + case SSB_CHIPCO_CLK_F6_4: + return 4; + case SSB_CHIPCO_CLK_F6_5: + return 5; + case SSB_CHIPCO_CLK_F6_6: + return 6; + case SSB_CHIPCO_CLK_F6_7: + return 7; + } + return 0; +} + +/* Calculate the speed the backplane would run at a given set of clockcontrol values */ +u32 ssb_calc_clock_rate(u32 plltype, u32 n, u32 m) +{ + u32 n1, n2, clock, m1, m2, m3, mc; + + n1 = (n & SSB_CHIPCO_CLK_N1); + n2 = ((n & SSB_CHIPCO_CLK_N2) >> SSB_CHIPCO_CLK_N2_SHIFT); + + switch (plltype) { + case SSB_PLLTYPE_6: /* 100/200 or 120/240 only */ + if (m & SSB_CHIPCO_CLK_T6_MMASK) + return SSB_CHIPCO_CLK_T6_M0; + return SSB_CHIPCO_CLK_T6_M1; + case SSB_PLLTYPE_1: /* 48Mhz base, 3 dividers */ + case SSB_PLLTYPE_3: /* 25Mhz, 2 dividers */ + case SSB_PLLTYPE_4: /* 48Mhz, 4 dividers */ + case SSB_PLLTYPE_7: /* 25Mhz, 4 dividers */ + n1 = clkfactor_f6_resolve(n1); + n2 += SSB_CHIPCO_CLK_F5_BIAS; + break; + case SSB_PLLTYPE_2: /* 48Mhz, 4 dividers */ + n1 += SSB_CHIPCO_CLK_T2_BIAS; + n2 += SSB_CHIPCO_CLK_T2_BIAS; + SSB_WARN_ON(!((n1 >= 2) && (n1 <= 7))); + SSB_WARN_ON(!((n2 >= 5) && (n2 <= 23))); + break; + case SSB_PLLTYPE_5: /* 25Mhz, 4 dividers */ + return 100000000; + default: + SSB_WARN_ON(1); + } + + switch (plltype) { + case SSB_PLLTYPE_3: /* 25Mhz, 2 dividers */ + case SSB_PLLTYPE_7: /* 25Mhz, 4 dividers */ + clock = SSB_CHIPCO_CLK_BASE2 * n1 * n2; + break; + default: + clock = SSB_CHIPCO_CLK_BASE1 * n1 * n2; + } + if (!clock) + return 0; + + m1 = (m & SSB_CHIPCO_CLK_M1); + m2 = ((m & SSB_CHIPCO_CLK_M2) >> SSB_CHIPCO_CLK_M2_SHIFT); + m3 = ((m & SSB_CHIPCO_CLK_M3) >> SSB_CHIPCO_CLK_M3_SHIFT); + mc = ((m & SSB_CHIPCO_CLK_MC) >> SSB_CHIPCO_CLK_MC_SHIFT); + + switch (plltype) { + case SSB_PLLTYPE_1: /* 48Mhz base, 3 dividers */ + case SSB_PLLTYPE_3: /* 25Mhz, 2 dividers */ + case SSB_PLLTYPE_4: /* 48Mhz, 4 dividers */ + case SSB_PLLTYPE_7: /* 25Mhz, 4 dividers */ + m1 = clkfactor_f6_resolve(m1); + if ((plltype == SSB_PLLTYPE_1) || + (plltype == SSB_PLLTYPE_3)) + m2 += SSB_CHIPCO_CLK_F5_BIAS; + else + m2 = clkfactor_f6_resolve(m2); + m3 = clkfactor_f6_resolve(m3); + + switch (mc) { + case SSB_CHIPCO_CLK_MC_BYPASS: + return clock; + case SSB_CHIPCO_CLK_MC_M1: + return (clock / m1); + case SSB_CHIPCO_CLK_MC_M1M2: + return (clock / (m1 * m2)); + case SSB_CHIPCO_CLK_MC_M1M2M3: + return (clock / (m1 * m2 * m3)); + case SSB_CHIPCO_CLK_MC_M1M3: + return (clock / (m1 * m3)); + } + return 0; + case SSB_PLLTYPE_2: + m1 += SSB_CHIPCO_CLK_T2_BIAS; + m2 += SSB_CHIPCO_CLK_T2M2_BIAS; + m3 += SSB_CHIPCO_CLK_T2_BIAS; + SSB_WARN_ON(!((m1 >= 2) && (m1 <= 7))); + SSB_WARN_ON(!((m2 >= 3) && (m2 <= 10))); + SSB_WARN_ON(!((m3 >= 2) && (m3 <= 7))); + + if (!(mc & SSB_CHIPCO_CLK_T2MC_M1BYP)) + clock /= m1; + if (!(mc & SSB_CHIPCO_CLK_T2MC_M2BYP)) + clock /= m2; + if (!(mc & SSB_CHIPCO_CLK_T2MC_M3BYP)) + clock /= m3; + return clock; + default: + SSB_WARN_ON(1); + } + return 0; +} + +/* Get the current speed the backplane is running at */ +u32 ssb_clockspeed(struct ssb_bus *bus) +{ + u32 rate; + u32 plltype; + u32 clkctl_n, clkctl_m; + + if (ssb_extif_available(&bus->extif)) + ssb_extif_get_clockcontrol(&bus->extif, &plltype, + &clkctl_n, &clkctl_m); + else if (bus->chipco.dev) + ssb_chipco_get_clockcontrol(&bus->chipco, &plltype, + &clkctl_n, &clkctl_m); + else + return 0; + + if (bus->chip_id == 0x5365) { + rate = 100000000; + } else { + rate = ssb_calc_clock_rate(plltype, clkctl_n, clkctl_m); + if (plltype == SSB_PLLTYPE_3) /* 25Mhz, 2 dividers */ + rate /= 2; + } + + return rate; +} +EXPORT_SYMBOL(ssb_clockspeed); + +static u32 ssb_tmslow_reject_bitmask(struct ssb_device *dev) +{ + u32 rev = ssb_read32(dev, SSB_IDLOW) & SSB_IDLOW_SSBREV; + + /* The REJECT bit changed position in TMSLOW between + * Backplane revisions. */ + switch (rev) { + case SSB_IDLOW_SSBREV_22: + return SSB_TMSLOW_REJECT_22; + case SSB_IDLOW_SSBREV_23: + return SSB_TMSLOW_REJECT_23; + case SSB_IDLOW_SSBREV_24: /* TODO - find the proper REJECT bits */ + case SSB_IDLOW_SSBREV_25: /* same here */ + case SSB_IDLOW_SSBREV_26: /* same here */ + case SSB_IDLOW_SSBREV_27: /* same here */ + return SSB_TMSLOW_REJECT_23; /* this is a guess */ + default: + printk(KERN_INFO "ssb: Backplane Revision 0x%.8X\n", rev); + WARN_ON(1); + } + return (SSB_TMSLOW_REJECT_22 | SSB_TMSLOW_REJECT_23); +} + +int ssb_device_is_enabled(struct ssb_device *dev) +{ + u32 val; + u32 reject; + + reject = ssb_tmslow_reject_bitmask(dev); + val = ssb_read32(dev, SSB_TMSLOW); + val &= SSB_TMSLOW_CLOCK | SSB_TMSLOW_RESET | reject; + + return (val == SSB_TMSLOW_CLOCK); +} +EXPORT_SYMBOL(ssb_device_is_enabled); + +static void ssb_flush_tmslow(struct ssb_device *dev) +{ + /* Make _really_ sure the device has finished the TMSLOW + * register write transaction, as we risk running into + * a machine check exception otherwise. + * Do this by reading the register back to commit the + * PCI write and delay an additional usec for the device + * to react to the change. */ + ssb_read32(dev, SSB_TMSLOW); + udelay(1); +} + +void ssb_device_enable(struct ssb_device *dev, u32 core_specific_flags) +{ + u32 val; + + ssb_device_disable(dev, core_specific_flags); + ssb_write32(dev, SSB_TMSLOW, + SSB_TMSLOW_RESET | SSB_TMSLOW_CLOCK | + SSB_TMSLOW_FGC | core_specific_flags); + ssb_flush_tmslow(dev); + + /* Clear SERR if set. This is a hw bug workaround. */ + if (ssb_read32(dev, SSB_TMSHIGH) & SSB_TMSHIGH_SERR) + ssb_write32(dev, SSB_TMSHIGH, 0); + + val = ssb_read32(dev, SSB_IMSTATE); + if (val & (SSB_IMSTATE_IBE | SSB_IMSTATE_TO)) { + val &= ~(SSB_IMSTATE_IBE | SSB_IMSTATE_TO); + ssb_write32(dev, SSB_IMSTATE, val); + } + + ssb_write32(dev, SSB_TMSLOW, + SSB_TMSLOW_CLOCK | SSB_TMSLOW_FGC | + core_specific_flags); + ssb_flush_tmslow(dev); + + ssb_write32(dev, SSB_TMSLOW, SSB_TMSLOW_CLOCK | + core_specific_flags); + ssb_flush_tmslow(dev); +} +EXPORT_SYMBOL(ssb_device_enable); + +/* Wait for a bit in a register to get set or unset. + * timeout is in units of ten-microseconds */ +static int ssb_wait_bit(struct ssb_device *dev, u16 reg, u32 bitmask, + int timeout, int set) +{ + int i; + u32 val; + + for (i = 0; i < timeout; i++) { + val = ssb_read32(dev, reg); + if (set) { + if (val & bitmask) + return 0; + } else { + if (!(val & bitmask)) + return 0; + } + udelay(10); + } + printk(KERN_ERR PFX "Timeout waiting for bitmask %08X on " + "register %04X to %s.\n", + bitmask, reg, (set ? "set" : "clear")); + + return -ETIMEDOUT; +} + +void ssb_device_disable(struct ssb_device *dev, u32 core_specific_flags) +{ + u32 reject; + + if (ssb_read32(dev, SSB_TMSLOW) & SSB_TMSLOW_RESET) + return; + + reject = ssb_tmslow_reject_bitmask(dev); + ssb_write32(dev, SSB_TMSLOW, reject | SSB_TMSLOW_CLOCK); + ssb_wait_bit(dev, SSB_TMSLOW, reject, 1000, 1); + ssb_wait_bit(dev, SSB_TMSHIGH, SSB_TMSHIGH_BUSY, 1000, 0); + ssb_write32(dev, SSB_TMSLOW, + SSB_TMSLOW_FGC | SSB_TMSLOW_CLOCK | + reject | SSB_TMSLOW_RESET | + core_specific_flags); + ssb_flush_tmslow(dev); + + ssb_write32(dev, SSB_TMSLOW, + reject | SSB_TMSLOW_RESET | + core_specific_flags); + ssb_flush_tmslow(dev); +} +EXPORT_SYMBOL(ssb_device_disable); + +u32 ssb_dma_translation(struct ssb_device *dev) +{ + switch (dev->bus->bustype) { + case SSB_BUSTYPE_SSB: + return 0; + case SSB_BUSTYPE_PCI: + case SSB_BUSTYPE_PCMCIA: + return SSB_PCI_DMA; + } + return 0; +} +EXPORT_SYMBOL(ssb_dma_translation); + +int ssb_dma_set_mask(struct ssb_device *ssb_dev, u64 mask) +{ + struct device *dev = ssb_dev->dev; + +#ifdef CONFIG_SSB_PCIHOST + if (ssb_dev->bus->bustype == SSB_BUSTYPE_PCI && + !dma_supported(dev, mask)) + return -EIO; +#endif + dev->coherent_dma_mask = mask; + dev->dma_mask = &dev->coherent_dma_mask; + + return 0; +} +EXPORT_SYMBOL(ssb_dma_set_mask); + +int ssb_bus_may_powerdown(struct ssb_bus *bus) +{ + struct ssb_chipcommon *cc; + int err = 0; + + /* On buses where more than one core may be working + * at a time, we must not powerdown stuff if there are + * still cores that may want to run. */ + if (bus->bustype == SSB_BUSTYPE_SSB) + goto out; + + cc = &bus->chipco; + ssb_chipco_set_clockmode(cc, SSB_CLKMODE_SLOW); + err = ssb_pci_xtal(bus, SSB_GPIO_XTAL | SSB_GPIO_PLL, 0); + if (err) + goto error; +out: +#ifdef CONFIG_SSB_DEBUG + bus->powered_up = 0; +#endif + return err; +error: + ssb_printk(KERN_ERR PFX "Bus powerdown failed\n"); + goto out; +} +EXPORT_SYMBOL(ssb_bus_may_powerdown); + +int ssb_bus_powerup(struct ssb_bus *bus, bool dynamic_pctl) +{ + struct ssb_chipcommon *cc; + int err; + enum ssb_clkmode mode; + + err = ssb_pci_xtal(bus, SSB_GPIO_XTAL | SSB_GPIO_PLL, 1); + if (err) + goto error; + cc = &bus->chipco; + mode = dynamic_pctl ? SSB_CLKMODE_DYNAMIC : SSB_CLKMODE_FAST; + ssb_chipco_set_clockmode(cc, mode); + +#ifdef CONFIG_SSB_DEBUG + bus->powered_up = 1; +#endif + return 0; +error: + ssb_printk(KERN_ERR PFX "Bus powerup failed\n"); + return err; +} +EXPORT_SYMBOL(ssb_bus_powerup); + +u32 ssb_admatch_base(u32 adm) +{ + u32 base = 0; + + switch (adm & SSB_ADM_TYPE) { + case SSB_ADM_TYPE0: + base = (adm & SSB_ADM_BASE0); + break; + case SSB_ADM_TYPE1: + SSB_WARN_ON(adm & SSB_ADM_NEG); /* unsupported */ + base = (adm & SSB_ADM_BASE1); + break; + case SSB_ADM_TYPE2: + SSB_WARN_ON(adm & SSB_ADM_NEG); /* unsupported */ + base = (adm & SSB_ADM_BASE2); + break; + default: + SSB_WARN_ON(1); + } + + return base; +} +EXPORT_SYMBOL(ssb_admatch_base); + +u32 ssb_admatch_size(u32 adm) +{ + u32 size = 0; + + switch (adm & SSB_ADM_TYPE) { + case SSB_ADM_TYPE0: + size = ((adm & SSB_ADM_SZ0) >> SSB_ADM_SZ0_SHIFT); + break; + case SSB_ADM_TYPE1: + SSB_WARN_ON(adm & SSB_ADM_NEG); /* unsupported */ + size = ((adm & SSB_ADM_SZ1) >> SSB_ADM_SZ1_SHIFT); + break; + case SSB_ADM_TYPE2: + SSB_WARN_ON(adm & SSB_ADM_NEG); /* unsupported */ + size = ((adm & SSB_ADM_SZ2) >> SSB_ADM_SZ2_SHIFT); + break; + default: + SSB_WARN_ON(1); + } + size = (1 << (size + 1)); + + return size; +} +EXPORT_SYMBOL(ssb_admatch_size); + +static int __init ssb_modinit(void) +{ + int err; + + /* See the comment at the ssb_is_early_boot definition */ + ssb_is_early_boot = 0; + err = bus_register(&ssb_bustype); + if (err) + return err; + + /* Maybe we already registered some buses at early boot. + * Check for this and attach them + */ + ssb_buses_lock(); + err = ssb_attach_queued_buses(); + ssb_buses_unlock(); + if (err) + bus_unregister(&ssb_bustype); + + err = b43_pci_ssb_bridge_init(); + if (err) { + ssb_printk(KERN_ERR "Broadcom 43xx PCI-SSB-bridge " + "initialization failed"); + /* don't fail SSB init because of this */ + err = 0; + } + + return err; +} +/* ssb must be initialized after PCI but before the ssb drivers. + * That means we must use some initcall between subsys_initcall + * and device_initcall. */ +fs_initcall(ssb_modinit); + +static void __exit ssb_modexit(void) +{ + b43_pci_ssb_bridge_exit(); + bus_unregister(&ssb_bustype); +} +module_exit(ssb_modexit) diff --git a/target/linux/generic-2.6/files-2.6.23/drivers/ssb/pci.c b/target/linux/generic-2.6/files-2.6.23/drivers/ssb/pci.c new file mode 100644 index 0000000000..b434df7504 --- /dev/null +++ b/target/linux/generic-2.6/files-2.6.23/drivers/ssb/pci.c @@ -0,0 +1,790 @@ +/* + * Sonics Silicon Backplane PCI-Hostbus related functions. + * + * Copyright (C) 2005-2006 Michael Buesch + * Copyright (C) 2005 Martin Langer + * Copyright (C) 2005 Stefano Brivio + * Copyright (C) 2005 Danny van Dyk + * Copyright (C) 2005 Andreas Jaggi + * + * Derived from the Broadcom 4400 device driver. + * Copyright (C) 2002 David S. Miller (davem@redhat.com) + * Fixed by Pekka Pietikainen (pp@ee.oulu.fi) + * Copyright (C) 2006 Broadcom Corporation. + * + * Licensed under the GNU/GPL. See COPYING for details. + */ + +#include +#include +#include +#include + +#include "ssb_private.h" + + +/* Define the following to 1 to enable a printk on each coreswitch. */ +#define SSB_VERBOSE_PCICORESWITCH_DEBUG 0 + + +/* Lowlevel coreswitching */ +int ssb_pci_switch_coreidx(struct ssb_bus *bus, u8 coreidx) +{ + int err; + int attempts = 0; + u32 cur_core; + + while (1) { + err = pci_write_config_dword(bus->host_pci, SSB_BAR0_WIN, + (coreidx * SSB_CORE_SIZE) + + SSB_ENUM_BASE); + if (err) + goto error; + err = pci_read_config_dword(bus->host_pci, SSB_BAR0_WIN, + &cur_core); + if (err) + goto error; + cur_core = (cur_core - SSB_ENUM_BASE) + / SSB_CORE_SIZE; + if (cur_core == coreidx) + break; + + if (attempts++ > SSB_BAR0_MAX_RETRIES) + goto error; + udelay(10); + } + return 0; +error: + ssb_printk(KERN_ERR PFX "Failed to switch to core %u\n", coreidx); + return -ENODEV; +} + +int ssb_pci_switch_core(struct ssb_bus *bus, + struct ssb_device *dev) +{ + int err; + unsigned long flags; + +#if SSB_VERBOSE_PCICORESWITCH_DEBUG + ssb_printk(KERN_INFO PFX + "Switching to %s core, index %d\n", + ssb_core_name(dev->id.coreid), + dev->core_index); +#endif + + spin_lock_irqsave(&bus->bar_lock, flags); + err = ssb_pci_switch_coreidx(bus, dev->core_index); + if (!err) + bus->mapped_device = dev; + spin_unlock_irqrestore(&bus->bar_lock, flags); + + return err; +} + +/* Enable/disable the on board crystal oscillator and/or PLL. */ +int ssb_pci_xtal(struct ssb_bus *bus, u32 what, int turn_on) +{ + int err; + u32 in, out, outenable; + u16 pci_status; + + if (bus->bustype != SSB_BUSTYPE_PCI) + return 0; + + err = pci_read_config_dword(bus->host_pci, SSB_GPIO_IN, &in); + if (err) + goto err_pci; + err = pci_read_config_dword(bus->host_pci, SSB_GPIO_OUT, &out); + if (err) + goto err_pci; + err = pci_read_config_dword(bus->host_pci, SSB_GPIO_OUT_ENABLE, &outenable); + if (err) + goto err_pci; + + outenable |= what; + + if (turn_on) { + /* Avoid glitching the clock if GPRS is already using it. + * We can't actually read the state of the PLLPD so we infer it + * by the value of XTAL_PU which *is* readable via gpioin. + */ + if (!(in & SSB_GPIO_XTAL)) { + if (what & SSB_GPIO_XTAL) { + /* Turn the crystal on */ + out |= SSB_GPIO_XTAL; + if (what & SSB_GPIO_PLL) + out |= SSB_GPIO_PLL; + err = pci_write_config_dword(bus->host_pci, SSB_GPIO_OUT, out); + if (err) + goto err_pci; + err = pci_write_config_dword(bus->host_pci, SSB_GPIO_OUT_ENABLE, + outenable); + if (err) + goto err_pci; + msleep(1); + } + if (what & SSB_GPIO_PLL) { + /* Turn the PLL on */ + out &= ~SSB_GPIO_PLL; + err = pci_write_config_dword(bus->host_pci, SSB_GPIO_OUT, out); + if (err) + goto err_pci; + msleep(5); + } + } + + err = pci_read_config_word(bus->host_pci, PCI_STATUS, &pci_status); + if (err) + goto err_pci; + pci_status &= ~PCI_STATUS_SIG_TARGET_ABORT; + err = pci_write_config_word(bus->host_pci, PCI_STATUS, pci_status); + if (err) + goto err_pci; + } else { + if (what & SSB_GPIO_XTAL) { + /* Turn the crystal off */ + out &= ~SSB_GPIO_XTAL; + } + if (what & SSB_GPIO_PLL) { + /* Turn the PLL off */ + out |= SSB_GPIO_PLL; + } + err = pci_write_config_dword(bus->host_pci, SSB_GPIO_OUT, out); + if (err) + goto err_pci; + err = pci_write_config_dword(bus->host_pci, SSB_GPIO_OUT_ENABLE, outenable); + if (err) + goto err_pci; + } + +out: + return err; + +err_pci: + printk(KERN_ERR PFX "Error: ssb_pci_xtal() could not access PCI config space!\n"); + err = -EBUSY; + goto out; +} + +/* Get the word-offset for a SSB_SPROM_XXX define. */ +#define SPOFF(offset) (((offset) - SSB_SPROM_BASE) / sizeof(u16)) +/* Helper to extract some _offset, which is one of the SSB_SPROM_XXX defines. */ +#define SPEX(_outvar, _offset, _mask, _shift) \ + out->_outvar = ((in[SPOFF(_offset)] & (_mask)) >> (_shift)) + +static inline u8 ssb_crc8(u8 crc, u8 data) +{ + /* Polynomial: x^8 + x^7 + x^6 + x^4 + x^2 + 1 */ + static const u8 t[] = { + 0x00, 0xF7, 0xB9, 0x4E, 0x25, 0xD2, 0x9C, 0x6B, + 0x4A, 0xBD, 0xF3, 0x04, 0x6F, 0x98, 0xD6, 0x21, + 0x94, 0x63, 0x2D, 0xDA, 0xB1, 0x46, 0x08, 0xFF, + 0xDE, 0x29, 0x67, 0x90, 0xFB, 0x0C, 0x42, 0xB5, + 0x7F, 0x88, 0xC6, 0x31, 0x5A, 0xAD, 0xE3, 0x14, + 0x35, 0xC2, 0x8C, 0x7B, 0x10, 0xE7, 0xA9, 0x5E, + 0xEB, 0x1C, 0x52, 0xA5, 0xCE, 0x39, 0x77, 0x80, + 0xA1, 0x56, 0x18, 0xEF, 0x84, 0x73, 0x3D, 0xCA, + 0xFE, 0x09, 0x47, 0xB0, 0xDB, 0x2C, 0x62, 0x95, + 0xB4, 0x43, 0x0D, 0xFA, 0x91, 0x66, 0x28, 0xDF, + 0x6A, 0x9D, 0xD3, 0x24, 0x4F, 0xB8, 0xF6, 0x01, + 0x20, 0xD7, 0x99, 0x6E, 0x05, 0xF2, 0xBC, 0x4B, + 0x81, 0x76, 0x38, 0xCF, 0xA4, 0x53, 0x1D, 0xEA, + 0xCB, 0x3C, 0x72, 0x85, 0xEE, 0x19, 0x57, 0xA0, + 0x15, 0xE2, 0xAC, 0x5B, 0x30, 0xC7, 0x89, 0x7E, + 0x5F, 0xA8, 0xE6, 0x11, 0x7A, 0x8D, 0xC3, 0x34, + 0xAB, 0x5C, 0x12, 0xE5, 0x8E, 0x79, 0x37, 0xC0, + 0xE1, 0x16, 0x58, 0xAF, 0xC4, 0x33, 0x7D, 0x8A, + 0x3F, 0xC8, 0x86, 0x71, 0x1A, 0xED, 0xA3, 0x54, + 0x75, 0x82, 0xCC, 0x3B, 0x50, 0xA7, 0xE9, 0x1E, + 0xD4, 0x23, 0x6D, 0x9A, 0xF1, 0x06, 0x48, 0xBF, + 0x9E, 0x69, 0x27, 0xD0, 0xBB, 0x4C, 0x02, 0xF5, + 0x40, 0xB7, 0xF9, 0x0E, 0x65, 0x92, 0xDC, 0x2B, + 0x0A, 0xFD, 0xB3, 0x44, 0x2F, 0xD8, 0x96, 0x61, + 0x55, 0xA2, 0xEC, 0x1B, 0x70, 0x87, 0xC9, 0x3E, + 0x1F, 0xE8, 0xA6, 0x51, 0x3A, 0xCD, 0x83, 0x74, + 0xC1, 0x36, 0x78, 0x8F, 0xE4, 0x13, 0x5D, 0xAA, + 0x8B, 0x7C, 0x32, 0xC5, 0xAE, 0x59, 0x17, 0xE0, + 0x2A, 0xDD, 0x93, 0x64, 0x0F, 0xF8, 0xB6, 0x41, + 0x60, 0x97, 0xD9, 0x2E, 0x45, 0xB2, 0xFC, 0x0B, + 0xBE, 0x49, 0x07, 0xF0, 0x9B, 0x6C, 0x22, 0xD5, + 0xF4, 0x03, 0x4D, 0xBA, 0xD1, 0x26, 0x68, 0x9F, + }; + return t[crc ^ data]; +} + +static u8 ssb_sprom_crc(const u16 *sprom, u16 size) +{ + int word; + u8 crc = 0xFF; + + for (word = 0; word < size - 1; word++) { + crc = ssb_crc8(crc, sprom[word] & 0x00FF); + crc = ssb_crc8(crc, (sprom[word] & 0xFF00) >> 8); + } + crc = ssb_crc8(crc, sprom[size - 1] & 0x00FF); + crc ^= 0xFF; + + return crc; +} + +static int sprom_check_crc(const u16 *sprom, u16 size) +{ + u8 crc; + u8 expected_crc; + u16 tmp; + + crc = ssb_sprom_crc(sprom, size); + tmp = sprom[size - 1] & SSB_SPROM_REVISION_CRC; + expected_crc = tmp >> SSB_SPROM_REVISION_CRC_SHIFT; + if (crc != expected_crc) + return -EPROTO; + + return 0; +} + +static void sprom_do_read(struct ssb_bus *bus, u16 *sprom) +{ + int i; + + for (i = 0; i < bus->sprom_size; i++) + sprom[i] = ioread16(bus->mmio + SSB_SPROM_BASE + (i * 2)); +} + +static int sprom_do_write(struct ssb_bus *bus, const u16 *sprom) +{ + struct pci_dev *pdev = bus->host_pci; + int i, err; + u32 spromctl; + u16 size = bus->sprom_size; + + ssb_printk(KERN_NOTICE PFX "Writing SPROM. Do NOT turn off the power! Please stand by...\n"); + err = pci_read_config_dword(pdev, SSB_SPROMCTL, &spromctl); + if (err) + goto err_ctlreg; + spromctl |= SSB_SPROMCTL_WE; + err = pci_write_config_dword(pdev, SSB_SPROMCTL, spromctl); + if (err) + goto err_ctlreg; + ssb_printk(KERN_NOTICE PFX "[ 0%%"); + msleep(500); + for (i = 0; i < size; i++) { + if (i == size / 4) + ssb_printk("25%%"); + else if (i == size / 2) + ssb_printk("50%%"); + else if (i == (size * 3) / 4) + ssb_printk("75%%"); + else if (i % 2) + ssb_printk("."); + writew(sprom[i], bus->mmio + SSB_SPROM_BASE + (i * 2)); + mmiowb(); + msleep(20); + } + err = pci_read_config_dword(pdev, SSB_SPROMCTL, &spromctl); + if (err) + goto err_ctlreg; + spromctl &= ~SSB_SPROMCTL_WE; + err = pci_write_config_dword(pdev, SSB_SPROMCTL, spromctl); + if (err) + goto err_ctlreg; + msleep(500); + ssb_printk("100%% ]\n"); + ssb_printk(KERN_NOTICE PFX "SPROM written.\n"); + + return 0; +err_ctlreg: + ssb_printk(KERN_ERR PFX "Could not access SPROM control register.\n"); + return err; +} + +static s8 r123_extract_antgain(u8 sprom_revision, const u16 *in, + u16 mask, u16 shift) +{ + u16 v; + u8 gain; + + v = in[SPOFF(SSB_SPROM1_AGAIN)]; + gain = (v & mask) >> shift; + if (gain == 0xFF) + gain = 2; /* If unset use 2dBm */ + if (sprom_revision == 1) { + /* Convert to Q5.2 */ + gain <<= 2; + } else { + /* Q5.2 Fractional part is stored in 0xC0 */ + gain = ((gain & 0xC0) >> 6) | ((gain & 0x3F) << 2); + } + + return (s8)gain; +} + +static void sprom_extract_r123(struct ssb_sprom *out, const u16 *in) +{ + int i; + u16 v; + s8 gain; + u16 loc[3]; + + if (out->revision == 3) { /* rev 3 moved MAC */ + loc[0] = SSB_SPROM3_IL0MAC; + loc[1] = SSB_SPROM3_ET0MAC; + loc[2] = SSB_SPROM3_ET1MAC; + } else { + loc[0] = SSB_SPROM1_IL0MAC; + loc[1] = SSB_SPROM1_ET0MAC; + loc[2] = SSB_SPROM1_ET1MAC; + } + for (i = 0; i < 3; i++) { + v = in[SPOFF(loc[0]) + i]; + *(((__be16 *)out->il0mac) + i) = cpu_to_be16(v); + } + for (i = 0; i < 3; i++) { + v = in[SPOFF(loc[1]) + i]; + *(((__be16 *)out->et0mac) + i) = cpu_to_be16(v); + } + for (i = 0; i < 3; i++) { + v = in[SPOFF(loc[2]) + i]; + *(((__be16 *)out->et1mac) + i) = cpu_to_be16(v); + } + SPEX(et0phyaddr, SSB_SPROM1_ETHPHY, SSB_SPROM1_ETHPHY_ET0A, 0); + SPEX(et1phyaddr, SSB_SPROM1_ETHPHY, SSB_SPROM1_ETHPHY_ET1A, + SSB_SPROM1_ETHPHY_ET1A_SHIFT); + SPEX(et0mdcport, SSB_SPROM1_ETHPHY, SSB_SPROM1_ETHPHY_ET0M, 14); + SPEX(et1mdcport, SSB_SPROM1_ETHPHY, SSB_SPROM1_ETHPHY_ET1M, 15); + SPEX(board_rev, SSB_SPROM1_BINF, SSB_SPROM1_BINF_BREV, 0); + SPEX(country_code, SSB_SPROM1_BINF, SSB_SPROM1_BINF_CCODE, + SSB_SPROM1_BINF_CCODE_SHIFT); + SPEX(ant_available_a, SSB_SPROM1_BINF, SSB_SPROM1_BINF_ANTA, + SSB_SPROM1_BINF_ANTA_SHIFT); + SPEX(ant_available_bg, SSB_SPROM1_BINF, SSB_SPROM1_BINF_ANTBG, + SSB_SPROM1_BINF_ANTBG_SHIFT); + SPEX(pa0b0, SSB_SPROM1_PA0B0, 0xFFFF, 0); + SPEX(pa0b1, SSB_SPROM1_PA0B1, 0xFFFF, 0); + SPEX(pa0b2, SSB_SPROM1_PA0B2, 0xFFFF, 0); + SPEX(pa1b0, SSB_SPROM1_PA1B0, 0xFFFF, 0); + SPEX(pa1b1, SSB_SPROM1_PA1B1, 0xFFFF, 0); + SPEX(pa1b2, SSB_SPROM1_PA1B2, 0xFFFF, 0); + SPEX(gpio0, SSB_SPROM1_GPIOA, SSB_SPROM1_GPIOA_P0, 0); + SPEX(gpio1, SSB_SPROM1_GPIOA, SSB_SPROM1_GPIOA_P1, + SSB_SPROM1_GPIOA_P1_SHIFT); + SPEX(gpio2, SSB_SPROM1_GPIOB, SSB_SPROM1_GPIOB_P2, 0); + SPEX(gpio3, SSB_SPROM1_GPIOB, SSB_SPROM1_GPIOB_P3, + SSB_SPROM1_GPIOB_P3_SHIFT); + SPEX(maxpwr_a, SSB_SPROM1_MAXPWR, SSB_SPROM1_MAXPWR_A, + SSB_SPROM1_MAXPWR_A_SHIFT); + SPEX(maxpwr_bg, SSB_SPROM1_MAXPWR, SSB_SPROM1_MAXPWR_BG, 0); + SPEX(itssi_a, SSB_SPROM1_ITSSI, SSB_SPROM1_ITSSI_A, + SSB_SPROM1_ITSSI_A_SHIFT); + SPEX(itssi_bg, SSB_SPROM1_ITSSI, SSB_SPROM1_ITSSI_BG, 0); + SPEX(boardflags_lo, SSB_SPROM1_BFLLO, 0xFFFF, 0); + if (out->revision >= 2) + SPEX(boardflags_hi, SSB_SPROM2_BFLHI, 0xFFFF, 0); + + /* Extract the antenna gain values. */ + gain = r123_extract_antgain(out->revision, in, + SSB_SPROM1_AGAIN_BG, + SSB_SPROM1_AGAIN_BG_SHIFT); + out->antenna_gain.ghz24.a0 = gain; + out->antenna_gain.ghz24.a1 = gain; + out->antenna_gain.ghz24.a2 = gain; + out->antenna_gain.ghz24.a3 = gain; + gain = r123_extract_antgain(out->revision, in, + SSB_SPROM1_AGAIN_A, + SSB_SPROM1_AGAIN_A_SHIFT); + out->antenna_gain.ghz5.a0 = gain; + out->antenna_gain.ghz5.a1 = gain; + out->antenna_gain.ghz5.a2 = gain; + out->antenna_gain.ghz5.a3 = gain; +} + +static void sprom_extract_r4(struct ssb_sprom *out, const u16 *in) +{ + int i; + u16 v; + + /* extract the equivalent of the r1 variables */ + for (i = 0; i < 3; i++) { + v = in[SPOFF(SSB_SPROM4_IL0MAC) + i]; + *(((__be16 *)out->il0mac) + i) = cpu_to_be16(v); + } + for (i = 0; i < 3; i++) { + v = in[SPOFF(SSB_SPROM4_ET0MAC) + i]; + *(((__be16 *)out->et0mac) + i) = cpu_to_be16(v); + } + for (i = 0; i < 3; i++) { + v = in[SPOFF(SSB_SPROM4_ET1MAC) + i]; + *(((__be16 *)out->et1mac) + i) = cpu_to_be16(v); + } + SPEX(et0phyaddr, SSB_SPROM4_ETHPHY, SSB_SPROM4_ETHPHY_ET0A, 0); + SPEX(et1phyaddr, SSB_SPROM4_ETHPHY, SSB_SPROM4_ETHPHY_ET1A, + SSB_SPROM4_ETHPHY_ET1A_SHIFT); + SPEX(country_code, SSB_SPROM4_CCODE, 0xFFFF, 0); + SPEX(boardflags_lo, SSB_SPROM4_BFLLO, 0xFFFF, 0); + SPEX(boardflags_hi, SSB_SPROM4_BFLHI, 0xFFFF, 0); + SPEX(ant_available_a, SSB_SPROM4_ANTAVAIL, SSB_SPROM4_ANTAVAIL_A, + SSB_SPROM4_ANTAVAIL_A_SHIFT); + SPEX(ant_available_bg, SSB_SPROM4_ANTAVAIL, SSB_SPROM4_ANTAVAIL_BG, + SSB_SPROM4_ANTAVAIL_BG_SHIFT); + SPEX(maxpwr_bg, SSB_SPROM4_MAXP_BG, SSB_SPROM4_MAXP_BG_MASK, 0); + SPEX(itssi_bg, SSB_SPROM4_MAXP_BG, SSB_SPROM4_ITSSI_BG, + SSB_SPROM4_ITSSI_BG_SHIFT); + SPEX(maxpwr_a, SSB_SPROM4_MAXP_A, SSB_SPROM4_MAXP_A_MASK, 0); + SPEX(itssi_a, SSB_SPROM4_MAXP_A, SSB_SPROM4_ITSSI_A, + SSB_SPROM4_ITSSI_A_SHIFT); + SPEX(gpio0, SSB_SPROM4_GPIOA, SSB_SPROM4_GPIOA_P0, 0); + SPEX(gpio1, SSB_SPROM4_GPIOA, SSB_SPROM4_GPIOA_P1, + SSB_SPROM4_GPIOA_P1_SHIFT); + SPEX(gpio2, SSB_SPROM4_GPIOB, SSB_SPROM4_GPIOB_P2, 0); + SPEX(gpio3, SSB_SPROM4_GPIOB, SSB_SPROM4_GPIOB_P3, + SSB_SPROM4_GPIOB_P3_SHIFT); + + /* Extract the antenna gain values. */ + SPEX(antenna_gain.ghz24.a0, SSB_SPROM4_AGAIN01, + SSB_SPROM4_AGAIN0, SSB_SPROM4_AGAIN0_SHIFT); + SPEX(antenna_gain.ghz24.a1, SSB_SPROM4_AGAIN01, + SSB_SPROM4_AGAIN1, SSB_SPROM4_AGAIN1_SHIFT); + SPEX(antenna_gain.ghz24.a2, SSB_SPROM4_AGAIN23, + SSB_SPROM4_AGAIN2, SSB_SPROM4_AGAIN2_SHIFT); + SPEX(antenna_gain.ghz24.a3, SSB_SPROM4_AGAIN23, + SSB_SPROM4_AGAIN3, SSB_SPROM4_AGAIN3_SHIFT); + memcpy(&out->antenna_gain.ghz5, &out->antenna_gain.ghz24, + sizeof(out->antenna_gain.ghz5)); + + /* TODO - get remaining rev 4 stuff needed */ +} + +static int sprom_extract(struct ssb_bus *bus, struct ssb_sprom *out, + const u16 *in, u16 size) +{ + memset(out, 0, sizeof(*out)); + + out->revision = in[size - 1] & 0x00FF; + ssb_dprintk(KERN_DEBUG PFX "SPROM revision %d detected.\n", out->revision); + if ((bus->chip_id & 0xFF00) == 0x4400) { + /* Workaround: The BCM44XX chip has a stupid revision + * number stored in the SPROM. + * Always extract r1. */ + out->revision = 1; + sprom_extract_r123(out, in); + } else if (bus->chip_id == 0x4321) { + /* the BCM4328 has a chipid == 0x4321 and a rev 4 SPROM */ + out->revision = 4; + sprom_extract_r4(out, in); + } else { + if (out->revision == 0) + goto unsupported; + if (out->revision >= 1 && out->revision <= 3) { + sprom_extract_r123(out, in); + } + if (out->revision == 4) + sprom_extract_r4(out, in); + if (out->revision >= 5) + goto unsupported; + } + + return 0; +unsupported: + ssb_printk(KERN_WARNING PFX "Unsupported SPROM revision %d " + "detected. Will extract v1\n", out->revision); + sprom_extract_r123(out, in); + return 0; +} + +static int ssb_pci_sprom_get(struct ssb_bus *bus, + struct ssb_sprom *sprom) +{ + int err = -ENOMEM; + u16 *buf; + + buf = kcalloc(SSB_SPROMSIZE_WORDS_R123, sizeof(u16), GFP_KERNEL); + if (!buf) + goto out; + bus->sprom_size = SSB_SPROMSIZE_WORDS_R123; + sprom_do_read(bus, buf); + err = sprom_check_crc(buf, bus->sprom_size); + if (err) { + /* check for rev 4 sprom - has special signature */ + if (buf[32] == 0x5372) { + kfree(buf); + buf = kcalloc(SSB_SPROMSIZE_WORDS_R4, sizeof(u16), + GFP_KERNEL); + if (!buf) + goto out; + bus->sprom_size = SSB_SPROMSIZE_WORDS_R4; + sprom_do_read(bus, buf); + err = sprom_check_crc(buf, bus->sprom_size); + } + if (err) + ssb_printk(KERN_WARNING PFX "WARNING: Invalid" + " SPROM CRC (corrupt SPROM)\n"); + } + err = sprom_extract(bus, sprom, buf, bus->sprom_size); + + kfree(buf); +out: + return err; +} + +static void ssb_pci_get_boardinfo(struct ssb_bus *bus, + struct ssb_boardinfo *bi) +{ + pci_read_config_word(bus->host_pci, PCI_SUBSYSTEM_VENDOR_ID, + &bi->vendor); + pci_read_config_word(bus->host_pci, PCI_SUBSYSTEM_ID, + &bi->type); + pci_read_config_word(bus->host_pci, PCI_REVISION_ID, + &bi->rev); +} + +int ssb_pci_get_invariants(struct ssb_bus *bus, + struct ssb_init_invariants *iv) +{ + int err; + + err = ssb_pci_sprom_get(bus, &iv->sprom); + if (err) + goto out; + ssb_pci_get_boardinfo(bus, &iv->boardinfo); + +out: + return err; +} + +#ifdef CONFIG_SSB_DEBUG +static int ssb_pci_assert_buspower(struct ssb_bus *bus) +{ + if (likely(bus->powered_up)) + return 0; + + printk(KERN_ERR PFX "FATAL ERROR: Bus powered down " + "while accessing PCI MMIO space\n"); + if (bus->power_warn_count <= 10) { + bus->power_warn_count++; + dump_stack(); + } + + return -ENODEV; +} +#else /* DEBUG */ +static inline int ssb_pci_assert_buspower(struct ssb_bus *bus) +{ + return 0; +} +#endif /* DEBUG */ + +static u16 ssb_pci_read16(struct ssb_device *dev, u16 offset) +{ + struct ssb_bus *bus = dev->bus; + + if (unlikely(ssb_pci_assert_buspower(bus))) + return 0xFFFF; + if (unlikely(bus->mapped_device != dev)) { + if (unlikely(ssb_pci_switch_core(bus, dev))) + return 0xFFFF; + } + return ioread16(bus->mmio + offset); +} + +static u32 ssb_pci_read32(struct ssb_device *dev, u16 offset) +{ + struct ssb_bus *bus = dev->bus; + + if (unlikely(ssb_pci_assert_buspower(bus))) + return 0xFFFFFFFF; + if (unlikely(bus->mapped_device != dev)) { + if (unlikely(ssb_pci_switch_core(bus, dev))) + return 0xFFFFFFFF; + } + return ioread32(bus->mmio + offset); +} + +static void ssb_pci_write16(struct ssb_device *dev, u16 offset, u16 value) +{ + struct ssb_bus *bus = dev->bus; + + if (unlikely(ssb_pci_assert_buspower(bus))) + return; + if (unlikely(bus->mapped_device != dev)) { + if (unlikely(ssb_pci_switch_core(bus, dev))) + return; + } + iowrite16(value, bus->mmio + offset); +} + +static void ssb_pci_write32(struct ssb_device *dev, u16 offset, u32 value) +{ + struct ssb_bus *bus = dev->bus; + + if (unlikely(ssb_pci_assert_buspower(bus))) + return; + if (unlikely(bus->mapped_device != dev)) { + if (unlikely(ssb_pci_switch_core(bus, dev))) + return; + } + iowrite32(value, bus->mmio + offset); +} + +/* Not "static", as it's used in main.c */ +const struct ssb_bus_ops ssb_pci_ops = { + .read16 = ssb_pci_read16, + .read32 = ssb_pci_read32, + .write16 = ssb_pci_write16, + .write32 = ssb_pci_write32, +}; + +static int sprom2hex(const u16 *sprom, char *buf, size_t buf_len, u16 size) +{ + int i, pos = 0; + + for (i = 0; i < size; i++) + pos += snprintf(buf + pos, buf_len - pos - 1, + "%04X", swab16(sprom[i]) & 0xFFFF); + pos += snprintf(buf + pos, buf_len - pos - 1, "\n"); + + return pos + 1; +} + +static int hex2sprom(u16 *sprom, const char *dump, size_t len, u16 size) +{ + char tmp[5] = { 0 }; + int cnt = 0; + unsigned long parsed; + + if (len < size * 2) + return -EINVAL; + + while (cnt < size) { + memcpy(tmp, dump, 4); + dump += 4; + parsed = simple_strtoul(tmp, NULL, 16); + sprom[cnt++] = swab16((u16)parsed); + } + + return 0; +} + +static ssize_t ssb_pci_attr_sprom_show(struct device *pcidev, + struct device_attribute *attr, + char *buf) +{ + struct pci_dev *pdev = container_of(pcidev, struct pci_dev, dev); + struct ssb_bus *bus; + u16 *sprom; + int err = -ENODEV; + ssize_t count = 0; + + bus = ssb_pci_dev_to_bus(pdev); + if (!bus) + goto out; + err = -ENOMEM; + sprom = kcalloc(bus->sprom_size, sizeof(u16), GFP_KERNEL); + if (!sprom) + goto out; + + /* Use interruptible locking, as the SPROM write might + * be holding the lock for several seconds. So allow userspace + * to cancel operation. */ + err = -ERESTARTSYS; + if (mutex_lock_interruptible(&bus->pci_sprom_mutex)) + goto out_kfree; + sprom_do_read(bus, sprom); + mutex_unlock(&bus->pci_sprom_mutex); + + count = sprom2hex(sprom, buf, PAGE_SIZE, bus->sprom_size); + err = 0; + +out_kfree: + kfree(sprom); +out: + return err ? err : count; +} + +static ssize_t ssb_pci_attr_sprom_store(struct device *pcidev, + struct device_attribute *attr, + const char *buf, size_t count) +{ + struct pci_dev *pdev = container_of(pcidev, struct pci_dev, dev); + struct ssb_bus *bus; + u16 *sprom; + int res = 0, err = -ENODEV; + + bus = ssb_pci_dev_to_bus(pdev); + if (!bus) + goto out; + err = -ENOMEM; + sprom = kcalloc(bus->sprom_size, sizeof(u16), GFP_KERNEL); + if (!sprom) + goto out; + err = hex2sprom(sprom, buf, count, bus->sprom_size); + if (err) { + err = -EINVAL; + goto out_kfree; + } + err = sprom_check_crc(sprom, bus->sprom_size); + if (err) { + err = -EINVAL; + goto out_kfree; + } + + /* Use interruptible locking, as the SPROM write might + * be holding the lock for several seconds. So allow userspace + * to cancel operation. */ + err = -ERESTARTSYS; + if (mutex_lock_interruptible(&bus->pci_sprom_mutex)) + goto out_kfree; + err = ssb_devices_freeze(bus); + if (err == -EOPNOTSUPP) { + ssb_printk(KERN_ERR PFX "SPROM write: Could not freeze devices. " + "No suspend support. Is CONFIG_PM enabled?\n"); + goto out_unlock; + } + if (err) { + ssb_printk(KERN_ERR PFX "SPROM write: Could not freeze all devices\n"); + goto out_unlock; + } + res = sprom_do_write(bus, sprom); + err = ssb_devices_thaw(bus); + if (err) + ssb_printk(KERN_ERR PFX "SPROM write: Could not thaw all devices\n"); +out_unlock: + mutex_unlock(&bus->pci_sprom_mutex); +out_kfree: + kfree(sprom); +out: + if (res) + return res; + return err ? err : count; +} + +static DEVICE_ATTR(ssb_sprom, 0600, + ssb_pci_attr_sprom_show, + ssb_pci_attr_sprom_store); + +void ssb_pci_exit(struct ssb_bus *bus) +{ + struct pci_dev *pdev; + + if (bus->bustype != SSB_BUSTYPE_PCI) + return; + + pdev = bus->host_pci; + device_remove_file(&pdev->dev, &dev_attr_ssb_sprom); +} + +int ssb_pci_init(struct ssb_bus *bus) +{ + struct pci_dev *pdev; + int err; + + if (bus->bustype != SSB_BUSTYPE_PCI) + return 0; + + pdev = bus->host_pci; + mutex_init(&bus->pci_sprom_mutex); + err = device_create_file(&pdev->dev, &dev_attr_ssb_sprom); + if (err) + goto out; + +out: + return err; +} diff --git a/target/linux/generic-2.6/files-2.6.23/drivers/ssb/pcihost_wrapper.c b/target/linux/generic-2.6/files-2.6.23/drivers/ssb/pcihost_wrapper.c new file mode 100644 index 0000000000..82a10abef6 --- /dev/null +++ b/target/linux/generic-2.6/files-2.6.23/drivers/ssb/pcihost_wrapper.c @@ -0,0 +1,104 @@ +/* + * Sonics Silicon Backplane + * PCI Hostdevice wrapper + * + * Copyright (c) 2005 Martin Langer + * Copyright (c) 2005 Stefano Brivio + * Copyright (c) 2005 Danny van Dyk + * Copyright (c) 2005 Andreas Jaggi + * Copyright (c) 2005-2007 Michael Buesch + * + * Licensed under the GNU/GPL. See COPYING for details. + */ + +#include +#include + + +#ifdef CONFIG_PM +static int ssb_pcihost_suspend(struct pci_dev *dev, pm_message_t state) +{ + pci_save_state(dev); + pci_disable_device(dev); + pci_set_power_state(dev, pci_choose_state(dev, state)); + + return 0; +} + +static int ssb_pcihost_resume(struct pci_dev *dev) +{ + int err; + + pci_set_power_state(dev, 0); + err = pci_enable_device(dev); + if (err) + return err; + pci_restore_state(dev); + + return 0; +} +#else /* CONFIG_PM */ +# define ssb_pcihost_suspend NULL +# define ssb_pcihost_resume NULL +#endif /* CONFIG_PM */ + +static int ssb_pcihost_probe(struct pci_dev *dev, + const struct pci_device_id *id) +{ + struct ssb_bus *ssb; + int err = -ENOMEM; + const char *name; + + ssb = kzalloc(sizeof(*ssb), GFP_KERNEL); + if (!ssb) + goto out; + err = pci_enable_device(dev); + if (err) + goto err_kfree_ssb; + name = dev->dev.bus_id; + if (dev->driver && dev->driver->name) + name = dev->driver->name; + err = pci_request_regions(dev, name); + if (err) + goto err_pci_disable; + pci_set_master(dev); + + err = ssb_bus_pcibus_register(ssb, dev); + if (err) + goto err_pci_release_regions; + + pci_set_drvdata(dev, ssb); + +out: + return err; + +err_pci_release_regions: + pci_release_regions(dev); +err_pci_disable: + pci_disable_device(dev); +err_kfree_ssb: + kfree(ssb); + return err; +} + +static void ssb_pcihost_remove(struct pci_dev *dev) +{ + struct ssb_bus *ssb = pci_get_drvdata(dev); + + ssb_bus_unregister(ssb); + pci_release_regions(dev); + pci_disable_device(dev); + kfree(ssb); + pci_set_drvdata(dev, NULL); +} + +int ssb_pcihost_register(struct pci_driver *driver) +{ + driver->probe = ssb_pcihost_probe; + driver->remove = ssb_pcihost_remove; + driver->suspend = ssb_pcihost_suspend; + driver->resume = ssb_pcihost_resume; + + return pci_register_driver(driver); +} +EXPORT_SYMBOL(ssb_pcihost_register); diff --git a/target/linux/generic-2.6/files-2.6.23/drivers/ssb/pcmcia.c b/target/linux/generic-2.6/files-2.6.23/drivers/ssb/pcmcia.c new file mode 100644 index 0000000000..46816cda8b --- /dev/null +++ b/target/linux/generic-2.6/files-2.6.23/drivers/ssb/pcmcia.c @@ -0,0 +1,287 @@ +/* + * Sonics Silicon Backplane + * PCMCIA-Hostbus related functions + * + * Copyright 2006 Johannes Berg + * Copyright 2007 Michael Buesch + * + * Licensed under the GNU/GPL. See COPYING for details. + */ + +#include +#include +#include + +#include +#include +#include +#include +#include +#include + +#include "ssb_private.h" + + +/* Define the following to 1 to enable a printk on each coreswitch. */ +#define SSB_VERBOSE_PCMCIACORESWITCH_DEBUG 0 + + +int ssb_pcmcia_switch_coreidx(struct ssb_bus *bus, + u8 coreidx) +{ + struct pcmcia_device *pdev = bus->host_pcmcia; + int err; + int attempts = 0; + u32 cur_core; + conf_reg_t reg; + u32 addr; + u32 read_addr; + + addr = (coreidx * SSB_CORE_SIZE) + SSB_ENUM_BASE; + while (1) { + reg.Action = CS_WRITE; + reg.Offset = 0x2E; + reg.Value = (addr & 0x0000F000) >> 12; + err = pcmcia_access_configuration_register(pdev, ®); + if (err != CS_SUCCESS) + goto error; + reg.Offset = 0x30; + reg.Value = (addr & 0x00FF0000) >> 16; + err = pcmcia_access_configuration_register(pdev, ®); + if (err != CS_SUCCESS) + goto error; + reg.Offset = 0x32; + reg.Value = (addr & 0xFF000000) >> 24; + err = pcmcia_access_configuration_register(pdev, ®); + if (err != CS_SUCCESS) + goto error; + + read_addr = 0; + + reg.Action = CS_READ; + reg.Offset = 0x2E; + err = pcmcia_access_configuration_register(pdev, ®); + if (err != CS_SUCCESS) + goto error; + read_addr |= ((u32)(reg.Value & 0x0F)) << 12; + reg.Offset = 0x30; + err = pcmcia_access_configuration_register(pdev, ®); + if (err != CS_SUCCESS) + goto error; + read_addr |= ((u32)reg.Value) << 16; + reg.Offset = 0x32; + err = pcmcia_access_configuration_register(pdev, ®); + if (err != CS_SUCCESS) + goto error; + read_addr |= ((u32)reg.Value) << 24; + + cur_core = (read_addr - SSB_ENUM_BASE) / SSB_CORE_SIZE; + if (cur_core == coreidx) + break; + + if (attempts++ > SSB_BAR0_MAX_RETRIES) + goto error; + udelay(10); + } + + return 0; +error: + ssb_printk(KERN_ERR PFX "Failed to switch to core %u\n", coreidx); + return -ENODEV; +} + +int ssb_pcmcia_switch_core(struct ssb_bus *bus, + struct ssb_device *dev) +{ + int err; + +#if SSB_VERBOSE_PCMCIACORESWITCH_DEBUG + ssb_printk(KERN_INFO PFX + "Switching to %s core, index %d\n", + ssb_core_name(dev->id.coreid), + dev->core_index); +#endif + + err = ssb_pcmcia_switch_coreidx(bus, dev->core_index); + if (!err) + bus->mapped_device = dev; + + return err; +} + +int ssb_pcmcia_switch_segment(struct ssb_bus *bus, u8 seg) +{ + int attempts = 0; + conf_reg_t reg; + int res; + + SSB_WARN_ON((seg != 0) && (seg != 1)); + reg.Offset = 0x34; + reg.Function = 0; + while (1) { + reg.Action = CS_WRITE; + reg.Value = seg; + res = pcmcia_access_configuration_register(bus->host_pcmcia, ®); + if (unlikely(res != CS_SUCCESS)) + goto error; + reg.Value = 0xFF; + reg.Action = CS_READ; + res = pcmcia_access_configuration_register(bus->host_pcmcia, ®); + if (unlikely(res != CS_SUCCESS)) + goto error; + + if (reg.Value == seg) + break; + + if (unlikely(attempts++ > SSB_BAR0_MAX_RETRIES)) + goto error; + udelay(10); + } + bus->mapped_pcmcia_seg = seg; + + return 0; +error: + ssb_printk(KERN_ERR PFX "Failed to switch pcmcia segment\n"); + return -ENODEV; +} + +static int select_core_and_segment(struct ssb_device *dev, + u16 *offset) +{ + struct ssb_bus *bus = dev->bus; + int err; + u8 need_segment; + + if (*offset >= 0x800) { + *offset -= 0x800; + need_segment = 1; + } else + need_segment = 0; + + if (unlikely(dev != bus->mapped_device)) { + err = ssb_pcmcia_switch_core(bus, dev); + if (unlikely(err)) + return err; + } + if (unlikely(need_segment != bus->mapped_pcmcia_seg)) { + err = ssb_pcmcia_switch_segment(bus, need_segment); + if (unlikely(err)) + return err; + } + + return 0; +} + +static u16 ssb_pcmcia_read16(struct ssb_device *dev, u16 offset) +{ + struct ssb_bus *bus = dev->bus; + unsigned long flags; + int err; + u16 value = 0xFFFF; + + spin_lock_irqsave(&bus->bar_lock, flags); + err = select_core_and_segment(dev, &offset); + if (likely(!err)) + value = readw(bus->mmio + offset); + spin_unlock_irqrestore(&bus->bar_lock, flags); + + return value; +} + +static u32 ssb_pcmcia_read32(struct ssb_device *dev, u16 offset) +{ + struct ssb_bus *bus = dev->bus; + unsigned long flags; + int err; + u32 lo = 0xFFFFFFFF, hi = 0xFFFFFFFF; + + spin_lock_irqsave(&bus->bar_lock, flags); + err = select_core_and_segment(dev, &offset); + if (likely(!err)) { + lo = readw(bus->mmio + offset); + hi = readw(bus->mmio + offset + 2); + } + spin_unlock_irqrestore(&bus->bar_lock, flags); + + return (lo | (hi << 16)); +} + +static void ssb_pcmcia_write16(struct ssb_device *dev, u16 offset, u16 value) +{ + struct ssb_bus *bus = dev->bus; + unsigned long flags; + int err; + + spin_lock_irqsave(&bus->bar_lock, flags); + err = select_core_and_segment(dev, &offset); + if (likely(!err)) + writew(value, bus->mmio + offset); + mmiowb(); + spin_unlock_irqrestore(&bus->bar_lock, flags); +} + +static void ssb_pcmcia_write32(struct ssb_device *dev, u16 offset, u32 value) +{ + struct ssb_bus *bus = dev->bus; + unsigned long flags; + int err; + + spin_lock_irqsave(&bus->bar_lock, flags); + err = select_core_and_segment(dev, &offset); + if (likely(!err)) { + writew((value & 0x0000FFFF), bus->mmio + offset); + writew(((value & 0xFFFF0000) >> 16), bus->mmio + offset + 2); + } + mmiowb(); + spin_unlock_irqrestore(&bus->bar_lock, flags); +} + +/* Not "static", as it's used in main.c */ +const struct ssb_bus_ops ssb_pcmcia_ops = { + .read16 = ssb_pcmcia_read16, + .read32 = ssb_pcmcia_read32, + .write16 = ssb_pcmcia_write16, + .write32 = ssb_pcmcia_write32, +}; + +#include +int ssb_pcmcia_get_invariants(struct ssb_bus *bus, + struct ssb_init_invariants *iv) +{ + //TODO + random_ether_addr(iv->sprom.il0mac); + return 0; +} + +int ssb_pcmcia_init(struct ssb_bus *bus) +{ + conf_reg_t reg; + int err; + + if (bus->bustype != SSB_BUSTYPE_PCMCIA) + return 0; + + /* Switch segment to a known state and sync + * bus->mapped_pcmcia_seg with hardware state. */ + ssb_pcmcia_switch_segment(bus, 0); + + /* Init IRQ routing */ + reg.Action = CS_READ; + reg.Function = 0; + if (bus->chip_id == 0x4306) + reg.Offset = 0x00; + else + reg.Offset = 0x80; + err = pcmcia_access_configuration_register(bus->host_pcmcia, ®); + if (err != CS_SUCCESS) + goto error; + reg.Action = CS_WRITE; + reg.Value |= 0x04 | 0x01; + err = pcmcia_access_configuration_register(bus->host_pcmcia, ®); + if (err != CS_SUCCESS) + goto error; + + return 0; +error: + return -ENODEV; +} diff --git a/target/linux/generic-2.6/files-2.6.23/drivers/ssb/scan.c b/target/linux/generic-2.6/files-2.6.23/drivers/ssb/scan.c new file mode 100644 index 0000000000..63ee5cfbef --- /dev/null +++ b/target/linux/generic-2.6/files-2.6.23/drivers/ssb/scan.c @@ -0,0 +1,424 @@ +/* + * Sonics Silicon Backplane + * Bus scanning + * + * Copyright (C) 2005-2007 Michael Buesch + * Copyright (C) 2005 Martin Langer + * Copyright (C) 2005 Stefano Brivio + * Copyright (C) 2005 Danny van Dyk + * Copyright (C) 2005 Andreas Jaggi + * Copyright (C) 2006 Broadcom Corporation. + * + * Licensed under the GNU/GPL. See COPYING for details. + */ + +#include +#include +#include +#include + +#include +#include +#include +#include + +#include "ssb_private.h" + + +const char *ssb_core_name(u16 coreid) +{ + switch (coreid) { + case SSB_DEV_CHIPCOMMON: + return "ChipCommon"; + case SSB_DEV_ILINE20: + return "ILine 20"; + case SSB_DEV_SDRAM: + return "SDRAM"; + case SSB_DEV_PCI: + return "PCI"; + case SSB_DEV_MIPS: + return "MIPS"; + case SSB_DEV_ETHERNET: + return "Fast Ethernet"; + case SSB_DEV_V90: + return "V90"; + case SSB_DEV_USB11_HOSTDEV: + return "USB 1.1 Hostdev"; + case SSB_DEV_ADSL: + return "ADSL"; + case SSB_DEV_ILINE100: + return "ILine 100"; + case SSB_DEV_IPSEC: + return "IPSEC"; + case SSB_DEV_PCMCIA: + return "PCMCIA"; + case SSB_DEV_INTERNAL_MEM: + return "Internal Memory"; + case SSB_DEV_MEMC_SDRAM: + return "MEMC SDRAM"; + case SSB_DEV_EXTIF: + return "EXTIF"; + case SSB_DEV_80211: + return "IEEE 802.11"; + case SSB_DEV_MIPS_3302: + return "MIPS 3302"; + case SSB_DEV_USB11_HOST: + return "USB 1.1 Host"; + case SSB_DEV_USB11_DEV: + return "USB 1.1 Device"; + case SSB_DEV_USB20_HOST: + return "USB 2.0 Host"; + case SSB_DEV_USB20_DEV: + return "USB 2.0 Device"; + case SSB_DEV_SDIO_HOST: + return "SDIO Host"; + case SSB_DEV_ROBOSWITCH: + return "Roboswitch"; + case SSB_DEV_PARA_ATA: + return "PATA"; + case SSB_DEV_SATA_XORDMA: + return "SATA XOR-DMA"; + case SSB_DEV_ETHERNET_GBIT: + return "GBit Ethernet"; + case SSB_DEV_PCIE: + return "PCI-E"; + case SSB_DEV_MIMO_PHY: + return "MIMO PHY"; + case SSB_DEV_SRAM_CTRLR: + return "SRAM Controller"; + case SSB_DEV_MINI_MACPHY: + return "Mini MACPHY"; + case SSB_DEV_ARM_1176: + return "ARM 1176"; + case SSB_DEV_ARM_7TDMI: + return "ARM 7TDMI"; + } + return "UNKNOWN"; +} + +static u16 pcidev_to_chipid(struct pci_dev *pci_dev) +{ + u16 chipid_fallback = 0; + + switch (pci_dev->device) { + case 0x4301: + chipid_fallback = 0x4301; + break; + case 0x4305 ... 0x4307: + chipid_fallback = 0x4307; + break; + case 0x4403: + chipid_fallback = 0x4402; + break; + case 0x4610 ... 0x4615: + chipid_fallback = 0x4610; + break; + case 0x4710 ... 0x4715: + chipid_fallback = 0x4710; + break; + case 0x4320 ... 0x4325: + chipid_fallback = 0x4309; + break; + case PCI_DEVICE_ID_BCM4401: + case PCI_DEVICE_ID_BCM4401B0: + case PCI_DEVICE_ID_BCM4401B1: + chipid_fallback = 0x4401; + break; + default: + ssb_printk(KERN_ERR PFX + "PCI-ID not in fallback list\n"); + } + + return chipid_fallback; +} + +static u8 chipid_to_nrcores(u16 chipid) +{ + switch (chipid) { + case 0x5365: + return 7; + case 0x4306: + return 6; + case 0x4310: + return 8; + case 0x4307: + case 0x4301: + return 5; + case 0x4401: + case 0x4402: + return 3; + case 0x4710: + case 0x4610: + case 0x4704: + return 9; + default: + ssb_printk(KERN_ERR PFX + "CHIPID not in nrcores fallback list\n"); + } + + return 1; +} + +static u32 scan_read32(struct ssb_bus *bus, u8 current_coreidx, + u16 offset) +{ + switch (bus->bustype) { + case SSB_BUSTYPE_SSB: + offset += current_coreidx * SSB_CORE_SIZE; + break; + case SSB_BUSTYPE_PCI: + break; + case SSB_BUSTYPE_PCMCIA: + if (offset >= 0x800) { + ssb_pcmcia_switch_segment(bus, 1); + offset -= 0x800; + } else + ssb_pcmcia_switch_segment(bus, 0); + break; + } + return readl(bus->mmio + offset); +} + +static int scan_switchcore(struct ssb_bus *bus, u8 coreidx) +{ + switch (bus->bustype) { + case SSB_BUSTYPE_SSB: + break; + case SSB_BUSTYPE_PCI: + return ssb_pci_switch_coreidx(bus, coreidx); + case SSB_BUSTYPE_PCMCIA: + return ssb_pcmcia_switch_coreidx(bus, coreidx); + } + return 0; +} + +void ssb_iounmap(struct ssb_bus *bus) +{ + switch (bus->bustype) { + case SSB_BUSTYPE_SSB: + case SSB_BUSTYPE_PCMCIA: + iounmap(bus->mmio); + break; + case SSB_BUSTYPE_PCI: +#ifdef CONFIG_SSB_PCIHOST + pci_iounmap(bus->host_pci, bus->mmio); +#else + SSB_BUG_ON(1); /* Can't reach this code. */ +#endif + break; + } + bus->mmio = NULL; + bus->mapped_device = NULL; +} + +static void __iomem *ssb_ioremap(struct ssb_bus *bus, + unsigned long baseaddr) +{ + void __iomem *mmio = NULL; + + switch (bus->bustype) { + case SSB_BUSTYPE_SSB: + /* Only map the first core for now. */ + /* fallthrough... */ + case SSB_BUSTYPE_PCMCIA: + mmio = ioremap(baseaddr, SSB_CORE_SIZE); + break; + case SSB_BUSTYPE_PCI: +#ifdef CONFIG_SSB_PCIHOST + mmio = pci_iomap(bus->host_pci, 0, ~0UL); +#else + SSB_BUG_ON(1); /* Can't reach this code. */ +#endif + break; + } + + return mmio; +} + +static int we_support_multiple_80211_cores(struct ssb_bus *bus) +{ + /* More than one 802.11 core is only supported by special chips. + * There are chips with two 802.11 cores, but with dangling + * pins on the second core. Be careful and reject them here. + */ + +#ifdef CONFIG_SSB_PCIHOST + if (bus->bustype == SSB_BUSTYPE_PCI) { + if (bus->host_pci->vendor == PCI_VENDOR_ID_BROADCOM && + bus->host_pci->device == 0x4324) + return 1; + } +#endif /* CONFIG_SSB_PCIHOST */ + return 0; +} + +int ssb_bus_scan(struct ssb_bus *bus, + unsigned long baseaddr) +{ + int err = -ENOMEM; + void __iomem *mmio; + u32 idhi, cc, rev, tmp; + int dev_i, i; + struct ssb_device *dev; + int nr_80211_cores = 0; + + mmio = ssb_ioremap(bus, baseaddr); + if (!mmio) + goto out; + bus->mmio = mmio; + + err = scan_switchcore(bus, 0); /* Switch to first core */ + if (err) + goto err_unmap; + + idhi = scan_read32(bus, 0, SSB_IDHIGH); + cc = (idhi & SSB_IDHIGH_CC) >> SSB_IDHIGH_CC_SHIFT; + rev = (idhi & SSB_IDHIGH_RCLO); + rev |= (idhi & SSB_IDHIGH_RCHI) >> SSB_IDHIGH_RCHI_SHIFT; + + bus->nr_devices = 0; + if (cc == SSB_DEV_CHIPCOMMON) { + tmp = scan_read32(bus, 0, SSB_CHIPCO_CHIPID); + + bus->chip_id = (tmp & SSB_CHIPCO_IDMASK); + bus->chip_rev = (tmp & SSB_CHIPCO_REVMASK) >> + SSB_CHIPCO_REVSHIFT; + bus->chip_package = (tmp & SSB_CHIPCO_PACKMASK) >> + SSB_CHIPCO_PACKSHIFT; + if (rev >= 4) { + bus->nr_devices = (tmp & SSB_CHIPCO_NRCORESMASK) >> + SSB_CHIPCO_NRCORESSHIFT; + } + tmp = scan_read32(bus, 0, SSB_CHIPCO_CAP); + bus->chipco.capabilities = tmp; + } else { + if (bus->bustype == SSB_BUSTYPE_PCI) { + bus->chip_id = pcidev_to_chipid(bus->host_pci); + pci_read_config_word(bus->host_pci, PCI_REVISION_ID, + &bus->chip_rev); + bus->chip_package = 0; + } else { + bus->chip_id = 0x4710; + bus->chip_rev = 0; + bus->chip_package = 0; + } + } + if (!bus->nr_devices) + bus->nr_devices = chipid_to_nrcores(bus->chip_id); + if (bus->nr_devices > ARRAY_SIZE(bus->devices)) { + ssb_printk(KERN_ERR PFX + "More than %d ssb cores found (%d)\n", + SSB_MAX_NR_CORES, bus->nr_devices); + goto err_unmap; + } + if (bus->bustype == SSB_BUSTYPE_SSB) { + /* Now that we know the number of cores, + * remap the whole IO space for all cores. + */ + err = -ENOMEM; + iounmap(mmio); + mmio = ioremap(baseaddr, SSB_CORE_SIZE * bus->nr_devices); + if (!mmio) + goto out; + bus->mmio = mmio; + } + + /* Fetch basic information about each core/device */ + for (i = 0, dev_i = 0; i < bus->nr_devices; i++) { + err = scan_switchcore(bus, i); + if (err) + goto err_unmap; + dev = &(bus->devices[dev_i]); + + idhi = scan_read32(bus, i, SSB_IDHIGH); + dev->id.coreid = (idhi & SSB_IDHIGH_CC) >> SSB_IDHIGH_CC_SHIFT; + dev->id.revision = (idhi & SSB_IDHIGH_RCLO); + dev->id.revision |= (idhi & SSB_IDHIGH_RCHI) >> SSB_IDHIGH_RCHI_SHIFT; + dev->id.vendor = (idhi & SSB_IDHIGH_VC) >> SSB_IDHIGH_VC_SHIFT; + dev->core_index = i; + dev->bus = bus; + dev->ops = bus->ops; + + ssb_dprintk(KERN_INFO PFX + "Core %d found: %s " + "(cc 0x%03X, rev 0x%02X, vendor 0x%04X)\n", + i, ssb_core_name(dev->id.coreid), + dev->id.coreid, dev->id.revision, dev->id.vendor); + + switch (dev->id.coreid) { + case SSB_DEV_80211: + nr_80211_cores++; + if (nr_80211_cores > 1) { + if (!we_support_multiple_80211_cores(bus)) { + ssb_dprintk(KERN_INFO PFX "Ignoring additional " + "802.11 core\n"); + continue; + } + } + break; + case SSB_DEV_EXTIF: +#ifdef CONFIG_SSB_DRIVER_EXTIF + if (bus->extif.dev) { + ssb_printk(KERN_WARNING PFX + "WARNING: Multiple EXTIFs found\n"); + break; + } + bus->extif.dev = dev; +#endif /* CONFIG_SSB_DRIVER_EXTIF */ + break; + case SSB_DEV_CHIPCOMMON: + if (bus->chipco.dev) { + ssb_printk(KERN_WARNING PFX + "WARNING: Multiple ChipCommon found\n"); + break; + } + bus->chipco.dev = dev; + break; + case SSB_DEV_MIPS: + case SSB_DEV_MIPS_3302: +#ifdef CONFIG_SSB_DRIVER_MIPS + if (bus->mipscore.dev) { + ssb_printk(KERN_WARNING PFX + "WARNING: Multiple MIPS cores found\n"); + break; + } + bus->mipscore.dev = dev; +#endif /* CONFIG_SSB_DRIVER_MIPS */ + break; + case SSB_DEV_PCI: + case SSB_DEV_PCIE: +#ifdef CONFIG_SSB_DRIVER_PCICORE + if (bus->bustype == SSB_BUSTYPE_PCI) { + /* Ignore PCI cores on PCI-E cards. + * Ignore PCI-E cores on PCI cards. */ + if (dev->id.coreid == SSB_DEV_PCI) { + if (bus->host_pci->is_pcie) + continue; + } else { + if (!bus->host_pci->is_pcie) + continue; + } + } + if (bus->pcicore.dev) { + ssb_printk(KERN_WARNING PFX + "WARNING: Multiple PCI(E) cores found\n"); + break; + } + bus->pcicore.dev = dev; +#endif /* CONFIG_SSB_DRIVER_PCICORE */ + break; + default: + break; + } + + dev_i++; + } + bus->nr_devices = dev_i; + + err = 0; +out: + return err; +err_unmap: + ssb_iounmap(bus); + goto out; +} diff --git a/target/linux/generic-2.6/files-2.6.23/drivers/ssb/ssb_private.h b/target/linux/generic-2.6/files-2.6.23/drivers/ssb/ssb_private.h new file mode 100644 index 0000000000..a789364264 --- /dev/null +++ b/target/linux/generic-2.6/files-2.6.23/drivers/ssb/ssb_private.h @@ -0,0 +1,136 @@ +#ifndef LINUX_SSB_PRIVATE_H_ +#define LINUX_SSB_PRIVATE_H_ + +#include +#include + + +#define PFX "ssb: " + +#ifdef CONFIG_SSB_SILENT +# define ssb_printk(fmt, x...) do { /* nothing */ } while (0) +#else +# define ssb_printk printk +#endif /* CONFIG_SSB_SILENT */ + +/* dprintk: Debugging printk; vanishes for non-debug compilation */ +#ifdef CONFIG_SSB_DEBUG +# define ssb_dprintk(fmt, x...) ssb_printk(fmt , ##x) +#else +# define ssb_dprintk(fmt, x...) do { /* nothing */ } while (0) +#endif + +#ifdef CONFIG_SSB_DEBUG +# define SSB_WARN_ON(x) WARN_ON(x) +# define SSB_BUG_ON(x) BUG_ON(x) +#else +static inline int __ssb_do_nothing(int x) { return x; } +# define SSB_WARN_ON(x) __ssb_do_nothing(unlikely(!!(x))) +# define SSB_BUG_ON(x) __ssb_do_nothing(unlikely(!!(x))) +#endif + + +/* pci.c */ +#ifdef CONFIG_SSB_PCIHOST +extern int ssb_pci_switch_core(struct ssb_bus *bus, + struct ssb_device *dev); +extern int ssb_pci_switch_coreidx(struct ssb_bus *bus, + u8 coreidx); +extern int ssb_pci_xtal(struct ssb_bus *bus, u32 what, + int turn_on); +extern int ssb_pci_get_invariants(struct ssb_bus *bus, + struct ssb_init_invariants *iv); +extern void ssb_pci_exit(struct ssb_bus *bus); +extern int ssb_pci_init(struct ssb_bus *bus); +extern const struct ssb_bus_ops ssb_pci_ops; + +#else /* CONFIG_SSB_PCIHOST */ + +static inline int ssb_pci_switch_core(struct ssb_bus *bus, + struct ssb_device *dev) +{ + return 0; +} +static inline int ssb_pci_switch_coreidx(struct ssb_bus *bus, + u8 coreidx) +{ + return 0; +} +static inline int ssb_pci_xtal(struct ssb_bus *bus, u32 what, + int turn_on) +{ + return 0; +} +static inline void ssb_pci_exit(struct ssb_bus *bus) +{ +} +static inline int ssb_pci_init(struct ssb_bus *bus) +{ + return 0; +} +#endif /* CONFIG_SSB_PCIHOST */ + + +/* pcmcia.c */ +#ifdef CONFIG_SSB_PCMCIAHOST +extern int ssb_pcmcia_switch_core(struct ssb_bus *bus, + struct ssb_device *dev); +extern int ssb_pcmcia_switch_coreidx(struct ssb_bus *bus, + u8 coreidx); +extern int ssb_pcmcia_switch_segment(struct ssb_bus *bus, + u8 seg); +extern int ssb_pcmcia_get_invariants(struct ssb_bus *bus, + struct ssb_init_invariants *iv); +extern int ssb_pcmcia_init(struct ssb_bus *bus); +extern const struct ssb_bus_ops ssb_pcmcia_ops; +#else /* CONFIG_SSB_PCMCIAHOST */ +static inline int ssb_pcmcia_switch_core(struct ssb_bus *bus, + struct ssb_device *dev) +{ + return 0; +} +static inline int ssb_pcmcia_switch_coreidx(struct ssb_bus *bus, + u8 coreidx) +{ + return 0; +} +static inline int ssb_pcmcia_switch_segment(struct ssb_bus *bus, + u8 seg) +{ + return 0; +} +static inline int ssb_pcmcia_init(struct ssb_bus *bus) +{ + return 0; +} +#endif /* CONFIG_SSB_PCMCIAHOST */ + + +/* scan.c */ +extern const char *ssb_core_name(u16 coreid); +extern int ssb_bus_scan(struct ssb_bus *bus, + unsigned long baseaddr); +extern void ssb_iounmap(struct ssb_bus *ssb); + + +/* core.c */ +extern u32 ssb_calc_clock_rate(u32 plltype, u32 n, u32 m); +extern int ssb_devices_freeze(struct ssb_bus *bus); +extern int ssb_devices_thaw(struct ssb_bus *bus); +extern struct ssb_bus *ssb_pci_dev_to_bus(struct pci_dev *pdev); + +/* b43_pci_bridge.c */ +#ifdef CONFIG_SSB_PCIHOST +extern int __init b43_pci_ssb_bridge_init(void); +extern void __exit b43_pci_ssb_bridge_exit(void); +#else /* CONFIG_SSB_PCIHOST */ +static inline int b43_pci_ssb_bridge_init(void) +{ + return 0; +} +static inline void b43_pci_ssb_bridge_exit(void) +{ +} +#endif /* CONFIG_SSB_PCIHOST */ + +#endif /* LINUX_SSB_PRIVATE_H_ */ diff --git a/target/linux/generic-2.6/files-2.6.23/include/linux/gpio_buttons.h b/target/linux/generic-2.6/files-2.6.23/include/linux/gpio_buttons.h new file mode 100644 index 0000000000..f5e6297258 --- /dev/null +++ b/target/linux/generic-2.6/files-2.6.23/include/linux/gpio_buttons.h @@ -0,0 +1,35 @@ +/* + * Definitions for the GPIO buttons interface driver + * + * Copyright (C) 2007,2008 Gabor Juhos + * + * This file was based on: /include/linux/gpio_keys.h + * The original gpio_keys.h seems not to have a license. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + */ + +#ifndef _GPIO_BUTTONS_H_ +#define _GPIO_BUTTONS_H_ + +struct gpio_button { + int gpio; /* GPIO line number */ + int active_low; + char *desc; /* button description */ + int type; /* input event type (EV_KEY, EV_SW) */ + int code; /* input event code (KEY_*, SW_*) */ + int count; + int threshold; /* count threshold */ +}; + +struct gpio_buttons_platform_data { + struct gpio_button *buttons; + int nbuttons; /* number of buttons */ + int poll_interval; /* polling interval */ +}; + +#endif /* _GPIO_BUTTONS_H_ */ + diff --git a/target/linux/generic-2.6/files-2.6.23/include/linux/gpio_dev.h b/target/linux/generic-2.6/files-2.6.23/include/linux/gpio_dev.h new file mode 100644 index 0000000000..3f3c9c772c --- /dev/null +++ b/target/linux/generic-2.6/files-2.6.23/include/linux/gpio_dev.h @@ -0,0 +1,11 @@ +#ifndef _GPIODEV_H__ +#define _GPIODEV_H__ + +#define IOC_GPIODEV_MAGIC 'B' +#define GPIO_GET _IO(IOC_GPIODEV_MAGIC, 10) +#define GPIO_SET _IO(IOC_GPIODEV_MAGIC, 11) +#define GPIO_CLEAR _IO(IOC_GPIODEV_MAGIC, 12) +#define GPIO_DIR_IN _IO(IOC_GPIODEV_MAGIC, 13) +#define GPIO_DIR_OUT _IO(IOC_GPIODEV_MAGIC, 14) + +#endif diff --git a/target/linux/generic-2.6/files-2.6.23/include/linux/spi/spi_gpio.h b/target/linux/generic-2.6/files-2.6.23/include/linux/spi/spi_gpio.h new file mode 100644 index 0000000000..8e7d4b189d --- /dev/null +++ b/target/linux/generic-2.6/files-2.6.23/include/linux/spi/spi_gpio.h @@ -0,0 +1,53 @@ +/* + * spi_gpio interface to platform code + * + * Copyright (c) 2008 Piotr Skamruk + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +#ifndef _LINUX_SPI_SPI_GPIO +#define _LINUX_SPI_SPI_GPIO + +#include +#include + + +/** struct spi_gpio_platform_data - Data definitions for a SPI-GPIO device. + * This structure holds information about a GPIO-based SPI device. + * + * @pin_clk: The GPIO pin number of the CLOCK pin. + * + * @pin_miso: The GPIO pin number of the MISO pin. + * + * @pin_mosi: The GPIO pin number of the MOSI pin. + * + * @pin_cs: The GPIO pin number of the CHIPSELECT pin. + * + * @cs_activelow: If true, the chip is selected when the CS line is low. + * + * @no_spi_delay: If true, no delay is done in the lowlevel bitbanging. + * Note that doing no delay is not standards compliant, + * but it might be needed to speed up transfers on some + * slow embedded machines. + * + * @boardinfo_setup: This callback is called after the + * SPI master device was registered, but before the + * device is registered. + * @boardinfo_setup_data: Data argument passed to boardinfo_setup(). + */ +struct spi_gpio_platform_data { + unsigned int pin_clk; + unsigned int pin_miso; + unsigned int pin_mosi; + unsigned int pin_cs; + bool cs_activelow; + bool no_spi_delay; + int (*boardinfo_setup)(struct spi_board_info *bi, + struct spi_master *master, + void *data); + void *boardinfo_setup_data; +}; + +#endif /* _LINUX_SPI_SPI_GPIO */ diff --git a/target/linux/generic-2.6/files-2.6.23/include/linux/ssb/ssb.h b/target/linux/generic-2.6/files-2.6.23/include/linux/ssb/ssb.h new file mode 100644 index 0000000000..9d5da8b2cc --- /dev/null +++ b/target/linux/generic-2.6/files-2.6.23/include/linux/ssb/ssb.h @@ -0,0 +1,404 @@ +#ifndef LINUX_SSB_H_ +#define LINUX_SSB_H_ + +#include +#include +#include +#include +#include +#include + +#include + + +struct pcmcia_device; +struct ssb_bus; +struct ssb_driver; + +struct ssb_sprom { + u8 revision; + u8 il0mac[6]; /* MAC address for 802.11b/g */ + u8 et0mac[6]; /* MAC address for Ethernet */ + u8 et1mac[6]; /* MAC address for 802.11a */ + u8 et0phyaddr; /* MII address for enet0 */ + u8 et1phyaddr; /* MII address for enet1 */ + u8 et0mdcport; /* MDIO for enet0 */ + u8 et1mdcport; /* MDIO for enet1 */ + u8 board_rev; /* Board revision number from SPROM. */ + u8 country_code; /* Country Code */ + u8 ant_available_a; /* A-PHY antenna available bits (up to 4) */ + u8 ant_available_bg; /* B/G-PHY antenna available bits (up to 4) */ + u16 pa0b0; + u16 pa0b1; + u16 pa0b2; + u16 pa1b0; + u16 pa1b1; + u16 pa1b2; + u8 gpio0; /* GPIO pin 0 */ + u8 gpio1; /* GPIO pin 1 */ + u8 gpio2; /* GPIO pin 2 */ + u8 gpio3; /* GPIO pin 3 */ + u16 maxpwr_a; /* A-PHY Amplifier Max Power (in dBm Q5.2) */ + u16 maxpwr_bg; /* B/G-PHY Amplifier Max Power (in dBm Q5.2) */ + u8 itssi_a; /* Idle TSSI Target for A-PHY */ + u8 itssi_bg; /* Idle TSSI Target for B/G-PHY */ + u16 boardflags_lo; /* Boardflags (low 16 bits) */ + u16 boardflags_hi; /* Boardflags (high 16 bits) */ + + /* Antenna gain values for up to 4 antennas + * on each band. Values in dBm/4 (Q5.2). Negative gain means the + * loss in the connectors is bigger than the gain. */ + struct { + struct { + s8 a0, a1, a2, a3; + } ghz24; /* 2.4GHz band */ + struct { + s8 a0, a1, a2, a3; + } ghz5; /* 5GHz band */ + } antenna_gain; + + /* TODO - add any parameters needed from rev 2, 3, or 4 SPROMs */ +}; + +/* Information about the PCB the circuitry is soldered on. */ +struct ssb_boardinfo { + u16 vendor; + u16 type; + u16 rev; +}; + + +struct ssb_device; +/* Lowlevel read/write operations on the device MMIO. + * Internal, don't use that outside of ssb. */ +struct ssb_bus_ops { + u16 (*read16)(struct ssb_device *dev, u16 offset); + u32 (*read32)(struct ssb_device *dev, u16 offset); + void (*write16)(struct ssb_device *dev, u16 offset, u16 value); + void (*write32)(struct ssb_device *dev, u16 offset, u32 value); +}; + + +/* Core-ID values. */ +#define SSB_DEV_CHIPCOMMON 0x800 +#define SSB_DEV_ILINE20 0x801 +#define SSB_DEV_SDRAM 0x803 +#define SSB_DEV_PCI 0x804 +#define SSB_DEV_MIPS 0x805 +#define SSB_DEV_ETHERNET 0x806 +#define SSB_DEV_V90 0x807 +#define SSB_DEV_USB11_HOSTDEV 0x808 +#define SSB_DEV_ADSL 0x809 +#define SSB_DEV_ILINE100 0x80A +#define SSB_DEV_IPSEC 0x80B +#define SSB_DEV_PCMCIA 0x80D +#define SSB_DEV_INTERNAL_MEM 0x80E +#define SSB_DEV_MEMC_SDRAM 0x80F +#define SSB_DEV_EXTIF 0x811 +#define SSB_DEV_80211 0x812 +#define SSB_DEV_MIPS_3302 0x816 +#define SSB_DEV_USB11_HOST 0x817 +#define SSB_DEV_USB11_DEV 0x818 +#define SSB_DEV_USB20_HOST 0x819 +#define SSB_DEV_USB20_DEV 0x81A +#define SSB_DEV_SDIO_HOST 0x81B +#define SSB_DEV_ROBOSWITCH 0x81C +#define SSB_DEV_PARA_ATA 0x81D +#define SSB_DEV_SATA_XORDMA 0x81E +#define SSB_DEV_ETHERNET_GBIT 0x81F +#define SSB_DEV_PCIE 0x820 +#define SSB_DEV_MIMO_PHY 0x821 +#define SSB_DEV_SRAM_CTRLR 0x822 +#define SSB_DEV_MINI_MACPHY 0x823 +#define SSB_DEV_ARM_1176 0x824 +#define SSB_DEV_ARM_7TDMI 0x825 + +/* Vendor-ID values */ +#define SSB_VENDOR_BROADCOM 0x4243 + +/* Some kernel subsystems poke with dev->drvdata, so we must use the + * following ugly workaround to get from struct device to struct ssb_device */ +struct __ssb_dev_wrapper { + struct device dev; + struct ssb_device *sdev; +}; + +struct ssb_device { + /* Having a copy of the ops pointer in each dev struct + * is an optimization. */ + const struct ssb_bus_ops *ops; + + struct device *dev; + struct ssb_bus *bus; + struct ssb_device_id id; + + u8 core_index; + unsigned int irq; + + /* Internal-only stuff follows. */ + void *drvdata; /* Per-device data */ + void *devtypedata; /* Per-devicetype (eg 802.11) data */ +}; + +/* Go from struct device to struct ssb_device. */ +static inline +struct ssb_device * dev_to_ssb_dev(struct device *dev) +{ + struct __ssb_dev_wrapper *wrap; + wrap = container_of(dev, struct __ssb_dev_wrapper, dev); + return wrap->sdev; +} + +/* Device specific user data */ +static inline +void ssb_set_drvdata(struct ssb_device *dev, void *data) +{ + dev->drvdata = data; +} +static inline +void * ssb_get_drvdata(struct ssb_device *dev) +{ + return dev->drvdata; +} + +/* Devicetype specific user data. This is per device-type (not per device) */ +void ssb_set_devtypedata(struct ssb_device *dev, void *data); +static inline +void * ssb_get_devtypedata(struct ssb_device *dev) +{ + return dev->devtypedata; +} + + +struct ssb_driver { + const char *name; + const struct ssb_device_id *id_table; + + int (*probe)(struct ssb_device *dev, const struct ssb_device_id *id); + void (*remove)(struct ssb_device *dev); + int (*suspend)(struct ssb_device *dev, pm_message_t state); + int (*resume)(struct ssb_device *dev); + void (*shutdown)(struct ssb_device *dev); + + struct device_driver drv; +}; +#define drv_to_ssb_drv(_drv) container_of(_drv, struct ssb_driver, drv) + +extern int __ssb_driver_register(struct ssb_driver *drv, struct module *owner); +static inline int ssb_driver_register(struct ssb_driver *drv) +{ + return __ssb_driver_register(drv, THIS_MODULE); +} +extern void ssb_driver_unregister(struct ssb_driver *drv); + + + + +enum ssb_bustype { + SSB_BUSTYPE_SSB, /* This SSB bus is the system bus */ + SSB_BUSTYPE_PCI, /* SSB is connected to PCI bus */ + SSB_BUSTYPE_PCMCIA, /* SSB is connected to PCMCIA bus */ +}; + +/* board_vendor */ +#define SSB_BOARDVENDOR_BCM 0x14E4 /* Broadcom */ +#define SSB_BOARDVENDOR_DELL 0x1028 /* Dell */ +#define SSB_BOARDVENDOR_HP 0x0E11 /* HP */ +/* board_type */ +#define SSB_BOARD_BCM94306MP 0x0418 +#define SSB_BOARD_BCM4309G 0x0421 +#define SSB_BOARD_BCM4306CB 0x0417 +#define SSB_BOARD_BCM4309MP 0x040C +#define SSB_BOARD_MP4318 0x044A +#define SSB_BOARD_BU4306 0x0416 +#define SSB_BOARD_BU4309 0x040A +/* chip_package */ +#define SSB_CHIPPACK_BCM4712S 1 /* Small 200pin 4712 */ +#define SSB_CHIPPACK_BCM4712M 2 /* Medium 225pin 4712 */ +#define SSB_CHIPPACK_BCM4712L 0 /* Large 340pin 4712 */ + +#include +#include +#include +#include + +struct ssb_bus { + /* The MMIO area. */ + void __iomem *mmio; + + const struct ssb_bus_ops *ops; + + /* The core in the basic address register window. (PCI bus only) */ + struct ssb_device *mapped_device; + /* Currently mapped PCMCIA segment. (bustype == SSB_BUSTYPE_PCMCIA only) */ + u8 mapped_pcmcia_seg; + /* Lock for core and segment switching. + * On PCMCIA-host busses this is used to protect the whole MMIO access. */ + spinlock_t bar_lock; + + /* The bus this backplane is running on. */ + enum ssb_bustype bustype; + /* Pointer to the PCI bus (only valid if bustype == SSB_BUSTYPE_PCI). */ + struct pci_dev *host_pci; + /* Pointer to the PCMCIA device (only if bustype == SSB_BUSTYPE_PCMCIA). */ + struct pcmcia_device *host_pcmcia; + +#ifdef CONFIG_SSB_PCIHOST + /* Mutex to protect the SPROM writing. */ + struct mutex pci_sprom_mutex; +#endif + + /* ID information about the Chip. */ + u16 chip_id; + u16 chip_rev; + u16 sprom_size; /* number of words in sprom */ + u8 chip_package; + + /* List of devices (cores) on the backplane. */ + struct ssb_device devices[SSB_MAX_NR_CORES]; + u8 nr_devices; + + /* Reference count. Number of suspended devices. */ + u8 suspend_cnt; + + /* Software ID number for this bus. */ + unsigned int busnumber; + + /* The ChipCommon device (if available). */ + struct ssb_chipcommon chipco; + /* The PCI-core device (if available). */ + struct ssb_pcicore pcicore; + /* The MIPS-core device (if available). */ + struct ssb_mipscore mipscore; + /* The EXTif-core device (if available). */ + struct ssb_extif extif; + + /* The following structure elements are not available in early + * SSB initialization. Though, they are available for regular + * registered drivers at any stage. So be careful when + * using them in the ssb core code. */ + + /* ID information about the PCB. */ + struct ssb_boardinfo boardinfo; + /* Contents of the SPROM. */ + struct ssb_sprom sprom; + + /* Internal-only stuff follows. Do not touch. */ + struct list_head list; +#ifdef CONFIG_SSB_DEBUG + /* Is the bus already powered up? */ + bool powered_up; + int power_warn_count; +#endif /* DEBUG */ +}; + +/* The initialization-invariants. */ +struct ssb_init_invariants { + struct ssb_boardinfo boardinfo; + struct ssb_sprom sprom; +}; +/* Type of function to fetch the invariants. */ +typedef int (*ssb_invariants_func_t)(struct ssb_bus *bus, + struct ssb_init_invariants *iv); + +/* Register a SSB system bus. get_invariants() is called after the + * basic system devices are initialized. + * The invariants are usually fetched from some NVRAM. + * Put the invariants into the struct pointed to by iv. */ +extern int ssb_bus_ssbbus_register(struct ssb_bus *bus, + unsigned long baseaddr, + ssb_invariants_func_t get_invariants); +#ifdef CONFIG_SSB_PCIHOST +extern int ssb_bus_pcibus_register(struct ssb_bus *bus, + struct pci_dev *host_pci); +#endif /* CONFIG_SSB_PCIHOST */ +#ifdef CONFIG_SSB_PCMCIAHOST +extern int ssb_bus_pcmciabus_register(struct ssb_bus *bus, + struct pcmcia_device *pcmcia_dev, + unsigned long baseaddr); +#endif /* CONFIG_SSB_PCMCIAHOST */ + +extern void ssb_bus_unregister(struct ssb_bus *bus); + +extern u32 ssb_clockspeed(struct ssb_bus *bus); + +/* Is the device enabled in hardware? */ +int ssb_device_is_enabled(struct ssb_device *dev); +/* Enable a device and pass device-specific SSB_TMSLOW flags. + * If no device-specific flags are available, use 0. */ +void ssb_device_enable(struct ssb_device *dev, u32 core_specific_flags); +/* Disable a device in hardware and pass SSB_TMSLOW flags (if any). */ +void ssb_device_disable(struct ssb_device *dev, u32 core_specific_flags); + + +/* Device MMIO register read/write functions. */ +static inline u16 ssb_read16(struct ssb_device *dev, u16 offset) +{ + return dev->ops->read16(dev, offset); +} +static inline u32 ssb_read32(struct ssb_device *dev, u16 offset) +{ + return dev->ops->read32(dev, offset); +} +static inline void ssb_write16(struct ssb_device *dev, u16 offset, u16 value) +{ + dev->ops->write16(dev, offset, value); +} +static inline void ssb_write32(struct ssb_device *dev, u16 offset, u32 value) +{ + dev->ops->write32(dev, offset, value); +} + + +/* Translation (routing) bits that need to be ORed to DMA + * addresses before they are given to a device. */ +extern u32 ssb_dma_translation(struct ssb_device *dev); +#define SSB_DMA_TRANSLATION_MASK 0xC0000000 +#define SSB_DMA_TRANSLATION_SHIFT 30 + +extern int ssb_dma_set_mask(struct ssb_device *ssb_dev, u64 mask); + + +#ifdef CONFIG_SSB_PCIHOST +/* PCI-host wrapper driver */ +extern int ssb_pcihost_register(struct pci_driver *driver); +static inline void ssb_pcihost_unregister(struct pci_driver *driver) +{ + pci_unregister_driver(driver); +} + +static inline +void ssb_pcihost_set_power_state(struct ssb_device *sdev, pci_power_t state) +{ + if (sdev->bus->bustype == SSB_BUSTYPE_PCI) + pci_set_power_state(sdev->bus->host_pci, state); +} +#else +static inline void ssb_pcihost_unregister(struct pci_driver *driver) +{ +} + +static inline +void ssb_pcihost_set_power_state(struct ssb_device *sdev, pci_power_t state) +{ +} +#endif /* CONFIG_SSB_PCIHOST */ + + +/* If a driver is shutdown or suspended, call this to signal + * that the bus may be completely powered down. SSB will decide, + * if it's really time to power down the bus, based on if there + * are other devices that want to run. */ +extern int ssb_bus_may_powerdown(struct ssb_bus *bus); +/* Before initializing and enabling a device, call this to power-up the bus. + * If you want to allow use of dynamic-power-control, pass the flag. + * Otherwise static always-on powercontrol will be used. */ +extern int ssb_bus_powerup(struct ssb_bus *bus, bool dynamic_pctl); + + +/* Various helper functions */ +extern u32 ssb_admatch_base(u32 adm); +extern u32 ssb_admatch_size(u32 adm); + + +#endif /* LINUX_SSB_H_ */ diff --git a/target/linux/generic-2.6/files-2.6.23/include/linux/ssb/ssb_driver_chipcommon.h b/target/linux/generic-2.6/files-2.6.23/include/linux/ssb/ssb_driver_chipcommon.h new file mode 100644 index 0000000000..4cb9954946 --- /dev/null +++ b/target/linux/generic-2.6/files-2.6.23/include/linux/ssb/ssb_driver_chipcommon.h @@ -0,0 +1,396 @@ +#ifndef LINUX_SSB_CHIPCO_H_ +#define LINUX_SSB_CHIPCO_H_ + +/* SonicsSiliconBackplane CHIPCOMMON core hardware definitions + * + * The chipcommon core provides chip identification, SB control, + * jtag, 0/1/2 uarts, clock frequency control, a watchdog interrupt timer, + * gpio interface, extbus, and support for serial and parallel flashes. + * + * Copyright 2005, Broadcom Corporation + * Copyright 2006, Michael Buesch + * + * Licensed under the GPL version 2. See COPYING for details. + */ + +/** ChipCommon core registers. **/ + +#define SSB_CHIPCO_CHIPID 0x0000 +#define SSB_CHIPCO_IDMASK 0x0000FFFF +#define SSB_CHIPCO_REVMASK 0x000F0000 +#define SSB_CHIPCO_REVSHIFT 16 +#define SSB_CHIPCO_PACKMASK 0x00F00000 +#define SSB_CHIPCO_PACKSHIFT 20 +#define SSB_CHIPCO_NRCORESMASK 0x0F000000 +#define SSB_CHIPCO_NRCORESSHIFT 24 +#define SSB_CHIPCO_CAP 0x0004 /* Capabilities */ +#define SSB_CHIPCO_CAP_NRUART 0x00000003 /* # of UARTs */ +#define SSB_CHIPCO_CAP_MIPSEB 0x00000004 /* MIPS in BigEndian Mode */ +#define SSB_CHIPCO_CAP_UARTCLK 0x00000018 /* UART clock select */ +#define SSB_CHIPCO_CAP_UARTCLK_INT 0x00000008 /* UARTs are driven by internal divided clock */ +#define SSB_CHIPCO_CAP_UARTGPIO 0x00000020 /* UARTs on GPIO 15-12 */ +#define SSB_CHIPCO_CAP_EXTBUS 0x000000C0 /* External buses present */ +#define SSB_CHIPCO_CAP_FLASHT 0x00000700 /* Flash Type */ +#define SSB_CHIPCO_FLASHT_NONE 0x00000000 /* No flash */ +#define SSB_CHIPCO_FLASHT_STSER 0x00000100 /* ST serial flash */ +#define SSB_CHIPCO_FLASHT_ATSER 0x00000200 /* Atmel serial flash */ +#define SSB_CHIPCO_FLASHT_PARA 0x00000700 /* Parallel flash */ +#define SSB_CHIPCO_CAP_PLLT 0x00038000 /* PLL Type */ +#define SSB_PLLTYPE_NONE 0x00000000 +#define SSB_PLLTYPE_1 0x00010000 /* 48Mhz base, 3 dividers */ +#define SSB_PLLTYPE_2 0x00020000 /* 48Mhz, 4 dividers */ +#define SSB_PLLTYPE_3 0x00030000 /* 25Mhz, 2 dividers */ +#define SSB_PLLTYPE_4 0x00008000 /* 48Mhz, 4 dividers */ +#define SSB_PLLTYPE_5 0x00018000 /* 25Mhz, 4 dividers */ +#define SSB_PLLTYPE_6 0x00028000 /* 100/200 or 120/240 only */ +#define SSB_PLLTYPE_7 0x00038000 /* 25Mhz, 4 dividers */ +#define SSB_CHIPCO_CAP_PCTL 0x00040000 /* Power Control */ +#define SSB_CHIPCO_CAP_OTPS 0x00380000 /* OTP size */ +#define SSB_CHIPCO_CAP_OTPS_SHIFT 19 +#define SSB_CHIPCO_CAP_OTPS_BASE 5 +#define SSB_CHIPCO_CAP_JTAGM 0x00400000 /* JTAG master present */ +#define SSB_CHIPCO_CAP_BROM 0x00800000 /* Internal boot ROM active */ +#define SSB_CHIPCO_CAP_64BIT 0x08000000 /* 64-bit Backplane */ +#define SSB_CHIPCO_CORECTL 0x0008 +#define SSB_CHIPCO_CORECTL_UARTCLK0 0x00000001 /* Drive UART with internal clock */ +#define SSB_CHIPCO_CORECTL_SE 0x00000002 /* sync clk out enable (corerev >= 3) */ +#define SSB_CHIPCO_BIST 0x000C +#define SSB_CHIPCO_OTPS 0x0010 /* OTP status */ +#define SSB_CHIPCO_OTPS_PROGFAIL 0x80000000 +#define SSB_CHIPCO_OTPS_PROTECT 0x00000007 +#define SSB_CHIPCO_OTPS_HW_PROTECT 0x00000001 +#define SSB_CHIPCO_OTPS_SW_PROTECT 0x00000002 +#define SSB_CHIPCO_OTPS_CID_PROTECT 0x00000004 +#define SSB_CHIPCO_OTPC 0x0014 /* OTP control */ +#define SSB_CHIPCO_OTPC_RECWAIT 0xFF000000 +#define SSB_CHIPCO_OTPC_PROGWAIT 0x00FFFF00 +#define SSB_CHIPCO_OTPC_PRW_SHIFT 8 +#define SSB_CHIPCO_OTPC_MAXFAIL 0x00000038 +#define SSB_CHIPCO_OTPC_VSEL 0x00000006 +#define SSB_CHIPCO_OTPC_SELVL 0x00000001 +#define SSB_CHIPCO_OTPP 0x0018 /* OTP prog */ +#define SSB_CHIPCO_OTPP_COL 0x000000FF +#define SSB_CHIPCO_OTPP_ROW 0x0000FF00 +#define SSB_CHIPCO_OTPP_ROW_SHIFT 8 +#define SSB_CHIPCO_OTPP_READERR 0x10000000 +#define SSB_CHIPCO_OTPP_VALUE 0x20000000 +#define SSB_CHIPCO_OTPP_READ 0x40000000 +#define SSB_CHIPCO_OTPP_START 0x80000000 +#define SSB_CHIPCO_OTPP_BUSY 0x80000000 +#define SSB_CHIPCO_IRQSTAT 0x0020 +#define SSB_CHIPCO_IRQMASK 0x0024 +#define SSB_CHIPCO_IRQ_GPIO 0x00000001 /* gpio intr */ +#define SSB_CHIPCO_IRQ_EXT 0x00000002 /* ro: ext intr pin (corerev >= 3) */ +#define SSB_CHIPCO_IRQ_WDRESET 0x80000000 /* watchdog reset occurred */ +#define SSB_CHIPCO_CHIPCTL 0x0028 /* Rev >= 11 only */ +#define SSB_CHIPCO_CHIPSTAT 0x002C /* Rev >= 11 only */ +#define SSB_CHIPCO_JCMD 0x0030 /* Rev >= 10 only */ +#define SSB_CHIPCO_JCMD_START 0x80000000 +#define SSB_CHIPCO_JCMD_BUSY 0x80000000 +#define SSB_CHIPCO_JCMD_PAUSE 0x40000000 +#define SSB_CHIPCO_JCMD0_ACC_MASK 0x0000F000 +#define SSB_CHIPCO_JCMD0_ACC_IRDR 0x00000000 +#define SSB_CHIPCO_JCMD0_ACC_DR 0x00001000 +#define SSB_CHIPCO_JCMD0_ACC_IR 0x00002000 +#define SSB_CHIPCO_JCMD0_ACC_RESET 0x00003000 +#define SSB_CHIPCO_JCMD0_ACC_IRPDR 0x00004000 +#define SSB_CHIPCO_JCMD0_ACC_PDR 0x00005000 +#define SSB_CHIPCO_JCMD0_IRW_MASK 0x00000F00 +#define SSB_CHIPCO_JCMD_ACC_MASK 0x000F0000 /* Changes for corerev 11 */ +#define SSB_CHIPCO_JCMD_ACC_IRDR 0x00000000 +#define SSB_CHIPCO_JCMD_ACC_DR 0x00010000 +#define SSB_CHIPCO_JCMD_ACC_IR 0x00020000 +#define SSB_CHIPCO_JCMD_ACC_RESET 0x00030000 +#define SSB_CHIPCO_JCMD_ACC_IRPDR 0x00040000 +#define SSB_CHIPCO_JCMD_ACC_PDR 0x00050000 +#define SSB_CHIPCO_JCMD_IRW_MASK 0x00001F00 +#define SSB_CHIPCO_JCMD_IRW_SHIFT 8 +#define SSB_CHIPCO_JCMD_DRW_MASK 0x0000003F +#define SSB_CHIPCO_JIR 0x0034 /* Rev >= 10 only */ +#define SSB_CHIPCO_JDR 0x0038 /* Rev >= 10 only */ +#define SSB_CHIPCO_JCTL 0x003C /* Rev >= 10 only */ +#define SSB_CHIPCO_JCTL_FORCE_CLK 4 /* Force clock */ +#define SSB_CHIPCO_JCTL_EXT_EN 2 /* Enable external targets */ +#define SSB_CHIPCO_JCTL_EN 1 /* Enable Jtag master */ +#define SSB_CHIPCO_FLASHCTL 0x0040 +#define SSB_CHIPCO_FLASHCTL_START 0x80000000 +#define SSB_CHIPCO_FLASHCTL_BUSY SSB_CHIPCO_FLASHCTL_START +#define SSB_CHIPCO_FLASHADDR 0x0044 +#define SSB_CHIPCO_FLASHDATA 0x0048 +#define SSB_CHIPCO_BCAST_ADDR 0x0050 +#define SSB_CHIPCO_BCAST_DATA 0x0054 +#define SSB_CHIPCO_GPIOIN 0x0060 +#define SSB_CHIPCO_GPIOOUT 0x0064 +#define SSB_CHIPCO_GPIOOUTEN 0x0068 +#define SSB_CHIPCO_GPIOCTL 0x006C +#define SSB_CHIPCO_GPIOPOL 0x0070 +#define SSB_CHIPCO_GPIOIRQ 0x0074 +#define SSB_CHIPCO_WATCHDOG 0x0080 +#define SSB_CHIPCO_GPIOTIMER 0x0088 /* LED powersave (corerev >= 16) */ +#define SSB_CHIPCO_GPIOTIMER_ONTIME_SHIFT 16 +#define SSB_CHIPCO_GPIOTOUTM 0x008C /* LED powersave (corerev >= 16) */ +#define SSB_CHIPCO_CLOCK_N 0x0090 +#define SSB_CHIPCO_CLOCK_SB 0x0094 +#define SSB_CHIPCO_CLOCK_PCI 0x0098 +#define SSB_CHIPCO_CLOCK_M2 0x009C +#define SSB_CHIPCO_CLOCK_MIPS 0x00A0 +#define SSB_CHIPCO_CLKDIV 0x00A4 /* Rev >= 3 only */ +#define SSB_CHIPCO_CLKDIV_SFLASH 0x0F000000 +#define SSB_CHIPCO_CLKDIV_SFLASH_SHIFT 24 +#define SSB_CHIPCO_CLKDIV_OTP 0x000F0000 +#define SSB_CHIPCO_CLKDIV_OTP_SHIFT 16 +#define SSB_CHIPCO_CLKDIV_JTAG 0x00000F00 +#define SSB_CHIPCO_CLKDIV_JTAG_SHIFT 8 +#define SSB_CHIPCO_CLKDIV_UART 0x000000FF +#define SSB_CHIPCO_PLLONDELAY 0x00B0 /* Rev >= 4 only */ +#define SSB_CHIPCO_FREFSELDELAY 0x00B4 /* Rev >= 4 only */ +#define SSB_CHIPCO_SLOWCLKCTL 0x00B8 /* 6 <= Rev <= 9 only */ +#define SSB_CHIPCO_SLOWCLKCTL_SRC 0x00000007 /* slow clock source mask */ +#define SSB_CHIPCO_SLOWCLKCTL_SRC_LPO 0x00000000 /* source of slow clock is LPO */ +#define SSB_CHIPCO_SLOWCLKCTL_SRC_XTAL 0x00000001 /* source of slow clock is crystal */ +#define SSB_CHIPCO_SLOECLKCTL_SRC_PCI 0x00000002 /* source of slow clock is PCI */ +#define SSB_CHIPCO_SLOWCLKCTL_LPOFREQ 0x00000200 /* LPOFreqSel, 1: 160Khz, 0: 32KHz */ +#define SSB_CHIPCO_SLOWCLKCTL_LPOPD 0x00000400 /* LPOPowerDown, 1: LPO is disabled, 0: LPO is enabled */ +#define SSB_CHIPCO_SLOWCLKCTL_FSLOW 0x00000800 /* ForceSlowClk, 1: sb/cores running on slow clock, 0: power logic control */ +#define SSB_CHIPCO_SLOWCLKCTL_IPLL 0x00001000 /* IgnorePllOffReq, 1/0: power logic ignores/honors PLL clock disable requests from core */ +#define SSB_CHIPCO_SLOWCLKCTL_ENXTAL 0x00002000 /* XtalControlEn, 1/0: power logic does/doesn't disable crystal when appropriate */ +#define SSB_CHIPCO_SLOWCLKCTL_XTALPU 0x00004000 /* XtalPU (RO), 1/0: crystal running/disabled */ +#define SSB_CHIPCO_SLOWCLKCTL_CLKDIV 0xFFFF0000 /* ClockDivider (SlowClk = 1/(4+divisor)) */ +#define SSB_CHIPCO_SLOWCLKCTL_CLKDIV_SHIFT 16 +#define SSB_CHIPCO_SYSCLKCTL 0x00C0 /* Rev >= 3 only */ +#define SSB_CHIPCO_SYSCLKCTL_IDLPEN 0x00000001 /* ILPen: Enable Idle Low Power */ +#define SSB_CHIPCO_SYSCLKCTL_ALPEN 0x00000002 /* ALPen: Enable Active Low Power */ +#define SSB_CHIPCO_SYSCLKCTL_PLLEN 0x00000004 /* ForcePLLOn */ +#define SSB_CHIPCO_SYSCLKCTL_FORCEALP 0x00000008 /* Force ALP (or HT if ALPen is not set */ +#define SSB_CHIPCO_SYSCLKCTL_FORCEHT 0x00000010 /* Force HT */ +#define SSB_CHIPCO_SYSCLKCTL_CLKDIV 0xFFFF0000 /* ClkDiv (ILP = 1/(4+divisor)) */ +#define SSB_CHIPCO_SYSCLKCTL_CLKDIV_SHIFT 16 +#define SSB_CHIPCO_CLKSTSTR 0x00C4 /* Rev >= 3 only */ +#define SSB_CHIPCO_PCMCIA_CFG 0x0100 +#define SSB_CHIPCO_PCMCIA_MEMWAIT 0x0104 +#define SSB_CHIPCO_PCMCIA_ATTRWAIT 0x0108 +#define SSB_CHIPCO_PCMCIA_IOWAIT 0x010C +#define SSB_CHIPCO_IDE_CFG 0x0110 +#define SSB_CHIPCO_IDE_MEMWAIT 0x0114 +#define SSB_CHIPCO_IDE_ATTRWAIT 0x0118 +#define SSB_CHIPCO_IDE_IOWAIT 0x011C +#define SSB_CHIPCO_PROG_CFG 0x0120 +#define SSB_CHIPCO_PROG_WAITCNT 0x0124 +#define SSB_CHIPCO_FLASH_CFG 0x0128 +#define SSB_CHIPCO_FLASH_WAITCNT 0x012C +#define SSB_CHIPCO_UART0_DATA 0x0300 +#define SSB_CHIPCO_UART0_IMR 0x0304 +#define SSB_CHIPCO_UART0_FCR 0x0308 +#define SSB_CHIPCO_UART0_LCR 0x030C +#define SSB_CHIPCO_UART0_MCR 0x0310 +#define SSB_CHIPCO_UART0_LSR 0x0314 +#define SSB_CHIPCO_UART0_MSR 0x0318 +#define SSB_CHIPCO_UART0_SCRATCH 0x031C +#define SSB_CHIPCO_UART1_DATA 0x0400 +#define SSB_CHIPCO_UART1_IMR 0x0404 +#define SSB_CHIPCO_UART1_FCR 0x0408 +#define SSB_CHIPCO_UART1_LCR 0x040C +#define SSB_CHIPCO_UART1_MCR 0x0410 +#define SSB_CHIPCO_UART1_LSR 0x0414 +#define SSB_CHIPCO_UART1_MSR 0x0418 +#define SSB_CHIPCO_UART1_SCRATCH 0x041C + + + +/** Clockcontrol masks and values **/ + +/* SSB_CHIPCO_CLOCK_N */ +#define SSB_CHIPCO_CLK_N1 0x0000003F /* n1 control */ +#define SSB_CHIPCO_CLK_N2 0x00003F00 /* n2 control */ +#define SSB_CHIPCO_CLK_N2_SHIFT 8 +#define SSB_CHIPCO_CLK_PLLC 0x000F0000 /* pll control */ +#define SSB_CHIPCO_CLK_PLLC_SHIFT 16 + +/* SSB_CHIPCO_CLOCK_SB/PCI/UART */ +#define SSB_CHIPCO_CLK_M1 0x0000003F /* m1 control */ +#define SSB_CHIPCO_CLK_M2 0x00003F00 /* m2 control */ +#define SSB_CHIPCO_CLK_M2_SHIFT 8 +#define SSB_CHIPCO_CLK_M3 0x003F0000 /* m3 control */ +#define SSB_CHIPCO_CLK_M3_SHIFT 16 +#define SSB_CHIPCO_CLK_MC 0x1F000000 /* mux control */ +#define SSB_CHIPCO_CLK_MC_SHIFT 24 + +/* N3M Clock control magic field values */ +#define SSB_CHIPCO_CLK_F6_2 0x02 /* A factor of 2 in */ +#define SSB_CHIPCO_CLK_F6_3 0x03 /* 6-bit fields like */ +#define SSB_CHIPCO_CLK_F6_4 0x05 /* N1, M1 or M3 */ +#define SSB_CHIPCO_CLK_F6_5 0x09 +#define SSB_CHIPCO_CLK_F6_6 0x11 +#define SSB_CHIPCO_CLK_F6_7 0x21 + +#define SSB_CHIPCO_CLK_F5_BIAS 5 /* 5-bit fields get this added */ + +#define SSB_CHIPCO_CLK_MC_BYPASS 0x08 +#define SSB_CHIPCO_CLK_MC_M1 0x04 +#define SSB_CHIPCO_CLK_MC_M1M2 0x02 +#define SSB_CHIPCO_CLK_MC_M1M2M3 0x01 +#define SSB_CHIPCO_CLK_MC_M1M3 0x11 + +/* Type 2 Clock control magic field values */ +#define SSB_CHIPCO_CLK_T2_BIAS 2 /* n1, n2, m1 & m3 bias */ +#define SSB_CHIPCO_CLK_T2M2_BIAS 3 /* m2 bias */ + +#define SSB_CHIPCO_CLK_T2MC_M1BYP 1 +#define SSB_CHIPCO_CLK_T2MC_M2BYP 2 +#define SSB_CHIPCO_CLK_T2MC_M3BYP 4 + +/* Type 6 Clock control magic field values */ +#define SSB_CHIPCO_CLK_T6_MMASK 1 /* bits of interest in m */ +#define SSB_CHIPCO_CLK_T6_M0 120000000 /* sb clock for m = 0 */ +#define SSB_CHIPCO_CLK_T6_M1 100000000 /* sb clock for m = 1 */ +#define SSB_CHIPCO_CLK_SB2MIPS_T6(sb) (2 * (sb)) + +/* Common clock base */ +#define SSB_CHIPCO_CLK_BASE1 24000000 /* Half the clock freq */ +#define SSB_CHIPCO_CLK_BASE2 12500000 /* Alternate crystal on some PLL's */ + +/* Clock control values for 200Mhz in 5350 */ +#define SSB_CHIPCO_CLK_5350_N 0x0311 +#define SSB_CHIPCO_CLK_5350_M 0x04020009 + + +/** Bits in the config registers **/ + +#define SSB_CHIPCO_CFG_EN 0x0001 /* Enable */ +#define SSB_CHIPCO_CFG_EXTM 0x000E /* Extif Mode */ +#define SSB_CHIPCO_CFG_EXTM_ASYNC 0x0002 /* Async/Parallel flash */ +#define SSB_CHIPCO_CFG_EXTM_SYNC 0x0004 /* Synchronous */ +#define SSB_CHIPCO_CFG_EXTM_PCMCIA 0x0008 /* PCMCIA */ +#define SSB_CHIPCO_CFG_EXTM_IDE 0x000A /* IDE */ +#define SSB_CHIPCO_CFG_DS16 0x0010 /* Data size, 0=8bit, 1=16bit */ +#define SSB_CHIPCO_CFG_CLKDIV 0x0060 /* Sync: Clock divisor */ +#define SSB_CHIPCO_CFG_CLKEN 0x0080 /* Sync: Clock enable */ +#define SSB_CHIPCO_CFG_BSTRO 0x0100 /* Sync: Size/Bytestrobe */ + + +/** Flash-specific control/status values */ + +/* flashcontrol opcodes for ST flashes */ +#define SSB_CHIPCO_FLASHCTL_ST_WREN 0x0006 /* Write Enable */ +#define SSB_CHIPCO_FLASHCTL_ST_WRDIS 0x0004 /* Write Disable */ +#define SSB_CHIPCO_FLASHCTL_ST_RDSR 0x0105 /* Read Status Register */ +#define SSB_CHIPCO_FLASHCTL_ST_WRSR 0x0101 /* Write Status Register */ +#define SSB_CHIPCO_FLASHCTL_ST_READ 0x0303 /* Read Data Bytes */ +#define SSB_CHIPCO_FLASHCTL_ST_PP 0x0302 /* Page Program */ +#define SSB_CHIPCO_FLASHCTL_ST_SE 0x02D8 /* Sector Erase */ +#define SSB_CHIPCO_FLASHCTL_ST_BE 0x00C7 /* Bulk Erase */ +#define SSB_CHIPCO_FLASHCTL_ST_DP 0x00B9 /* Deep Power-down */ +#define SSB_CHIPCO_FLASHCTL_ST_RSIG 0x03AB /* Read Electronic Signature */ + +/* Status register bits for ST flashes */ +#define SSB_CHIPCO_FLASHSTA_ST_WIP 0x01 /* Write In Progress */ +#define SSB_CHIPCO_FLASHSTA_ST_WEL 0x02 /* Write Enable Latch */ +#define SSB_CHIPCO_FLASHSTA_ST_BP 0x1C /* Block Protect */ +#define SSB_CHIPCO_FLASHSTA_ST_BP_SHIFT 2 +#define SSB_CHIPCO_FLASHSTA_ST_SRWD 0x80 /* Status Register Write Disable */ + +/* flashcontrol opcodes for Atmel flashes */ +#define SSB_CHIPCO_FLASHCTL_AT_READ 0x07E8 +#define SSB_CHIPCO_FLASHCTL_AT_PAGE_READ 0x07D2 +#define SSB_CHIPCO_FLASHCTL_AT_BUF1_READ /* FIXME */ +#define SSB_CHIPCO_FLASHCTL_AT_BUF2_READ /* FIXME */ +#define SSB_CHIPCO_FLASHCTL_AT_STATUS 0x01D7 +#define SSB_CHIPCO_FLASHCTL_AT_BUF1_WRITE 0x0384 +#define SSB_CHIPCO_FLASHCTL_AT_BUF2_WRITE 0x0387 +#define SSB_CHIPCO_FLASHCTL_AT_BUF1_ERASE_PRGM 0x0283 /* Erase program */ +#define SSB_CHIPCO_FLASHCTL_AT_BUF2_ERASE_PRGM 0x0286 /* Erase program */ +#define SSB_CHIPCO_FLASHCTL_AT_BUF1_PROGRAM 0x0288 +#define SSB_CHIPCO_FLASHCTL_AT_BUF2_PROGRAM 0x0289 +#define SSB_CHIPCO_FLASHCTL_AT_PAGE_ERASE 0x0281 +#define SSB_CHIPCO_FLASHCTL_AT_BLOCK_ERASE 0x0250 +#define SSB_CHIPCO_FLASHCTL_AT_BUF1_WRER_PRGM 0x0382 /* Write erase program */ +#define SSB_CHIPCO_FLASHCTL_AT_BUF2_WRER_PRGM 0x0385 /* Write erase program */ +#define SSB_CHIPCO_FLASHCTL_AT_BUF1_LOAD 0x0253 +#define SSB_CHIPCO_FLASHCTL_AT_BUF2_LOAD 0x0255 +#define SSB_CHIPCO_FLASHCTL_AT_BUF1_COMPARE 0x0260 +#define SSB_CHIPCO_FLASHCTL_AT_BUF2_COMPARE 0x0261 +#define SSB_CHIPCO_FLASHCTL_AT_BUF1_REPROGRAM 0x0258 +#define SSB_CHIPCO_FLASHCTL_AT_BUF2_REPROGRAM 0x0259 + +/* Status register bits for Atmel flashes */ +#define SSB_CHIPCO_FLASHSTA_AT_READY 0x80 +#define SSB_CHIPCO_FLASHSTA_AT_MISMATCH 0x40 +#define SSB_CHIPCO_FLASHSTA_AT_ID 0x38 +#define SSB_CHIPCO_FLASHSTA_AT_ID_SHIFT 3 + + +/** OTP **/ + +/* OTP regions */ +#define SSB_CHIPCO_OTP_HW_REGION SSB_CHIPCO_OTPS_HW_PROTECT +#define SSB_CHIPCO_OTP_SW_REGION SSB_CHIPCO_OTPS_SW_PROTECT +#define SSB_CHIPCO_OTP_CID_REGION SSB_CHIPCO_OTPS_CID_PROTECT + +/* OTP regions (Byte offsets from otp size) */ +#define SSB_CHIPCO_OTP_SWLIM_OFF (-8) +#define SSB_CHIPCO_OTP_CIDBASE_OFF 0 +#define SSB_CHIPCO_OTP_CIDLIM_OFF 8 + +/* Predefined OTP words (Word offset from otp size) */ +#define SSB_CHIPCO_OTP_BOUNDARY_OFF (-4) +#define SSB_CHIPCO_OTP_HWSIGN_OFF (-3) +#define SSB_CHIPCO_OTP_SWSIGN_OFF (-2) +#define SSB_CHIPCO_OTP_CIDSIGN_OFF (-1) + +#define SSB_CHIPCO_OTP_CID_OFF 0 +#define SSB_CHIPCO_OTP_PKG_OFF 1 +#define SSB_CHIPCO_OTP_FID_OFF 2 +#define SSB_CHIPCO_OTP_RSV_OFF 3 +#define SSB_CHIPCO_OTP_LIM_OFF 4 + +#define SSB_CHIPCO_OTP_SIGNATURE 0x578A +#define SSB_CHIPCO_OTP_MAGIC 0x4E56 + + +struct ssb_device; +struct ssb_serial_port; + +struct ssb_chipcommon { + struct ssb_device *dev; + u32 capabilities; + /* Fast Powerup Delay constant */ + u16 fast_pwrup_delay; +}; + +extern void ssb_chipcommon_init(struct ssb_chipcommon *cc); + +#include +extern void ssb_chipco_suspend(struct ssb_chipcommon *cc, pm_message_t state); +extern void ssb_chipco_resume(struct ssb_chipcommon *cc); + +extern void ssb_chipco_get_clockcpu(struct ssb_chipcommon *cc, + u32 *plltype, u32 *n, u32 *m); +extern void ssb_chipco_get_clockcontrol(struct ssb_chipcommon *cc, + u32 *plltype, u32 *n, u32 *m); +extern void ssb_chipco_timing_init(struct ssb_chipcommon *cc, + unsigned long ns_per_cycle); + +enum ssb_clkmode { + SSB_CLKMODE_SLOW, + SSB_CLKMODE_FAST, + SSB_CLKMODE_DYNAMIC, +}; + +extern void ssb_chipco_set_clockmode(struct ssb_chipcommon *cc, + enum ssb_clkmode mode); + +extern void ssb_chipco_watchdog_timer_set(struct ssb_chipcommon *cc, + u32 ticks); + +u32 ssb_chipco_gpio_in(struct ssb_chipcommon *cc, u32 mask); + +void ssb_chipco_gpio_out(struct ssb_chipcommon *cc, u32 mask, u32 value); + +void ssb_chipco_gpio_outen(struct ssb_chipcommon *cc, u32 mask, u32 value); + +#ifdef CONFIG_SSB_SERIAL +extern int ssb_chipco_serial_init(struct ssb_chipcommon *cc, + struct ssb_serial_port *ports); +#endif /* CONFIG_SSB_SERIAL */ + +#endif /* LINUX_SSB_CHIPCO_H_ */ diff --git a/target/linux/generic-2.6/files-2.6.23/include/linux/ssb/ssb_driver_extif.h b/target/linux/generic-2.6/files-2.6.23/include/linux/ssb/ssb_driver_extif.h new file mode 100644 index 0000000000..a9164357b5 --- /dev/null +++ b/target/linux/generic-2.6/files-2.6.23/include/linux/ssb/ssb_driver_extif.h @@ -0,0 +1,204 @@ +/* + * Hardware-specific External Interface I/O core definitions + * for the BCM47xx family of SiliconBackplane-based chips. + * + * The External Interface core supports a total of three external chip selects + * supporting external interfaces. One of the external chip selects is + * used for Flash, one is used for PCMCIA, and the other may be + * programmed to support either a synchronous interface or an + * asynchronous interface. The asynchronous interface can be used to + * support external devices such as UARTs and the BCM2019 Bluetooth + * baseband processor. + * The external interface core also contains 2 on-chip 16550 UARTs, clock + * frequency control, a watchdog interrupt timer, and a GPIO interface. + * + * Copyright 2005, Broadcom Corporation + * Copyright 2006, Michael Buesch + * + * Licensed under the GPL version 2. See COPYING for details. + */ +#ifndef LINUX_SSB_EXTIFCORE_H_ +#define LINUX_SSB_EXTIFCORE_H_ + +/* external interface address space */ +#define SSB_EXTIF_PCMCIA_MEMBASE(x) (x) +#define SSB_EXTIF_PCMCIA_IOBASE(x) ((x) + 0x100000) +#define SSB_EXTIF_PCMCIA_CFGBASE(x) ((x) + 0x200000) +#define SSB_EXTIF_CFGIF_BASE(x) ((x) + 0x800000) +#define SSB_EXTIF_FLASH_BASE(x) ((x) + 0xc00000) + +#define SSB_EXTIF_NR_GPIOOUT 5 +/* GPIO NOTE: + * The multiple instances of output and output enable registers + * are present to allow driver software for multiple cores to control + * gpio outputs without needing to share a single register pair. + * Use the following helper macro to get a register offset value. + */ +#define SSB_EXTIF_GPIO_OUT(index) ({ \ + BUILD_BUG_ON(index >= SSB_EXTIF_NR_GPIOOUT); \ + SSB_EXTIF_GPIO_OUT_BASE + ((index) * 8); \ + }) +#define SSB_EXTIF_GPIO_OUTEN(index) ({ \ + BUILD_BUG_ON(index >= SSB_EXTIF_NR_GPIOOUT); \ + SSB_EXTIF_GPIO_OUTEN_BASE + ((index) * 8); \ + }) + +/** EXTIF core registers **/ + +#define SSB_EXTIF_CTL 0x0000 +#define SSB_EXTIF_CTL_UARTEN (1 << 0) /* UART enable */ +#define SSB_EXTIF_EXTSTAT 0x0004 +#define SSB_EXTIF_EXTSTAT_EMODE (1 << 0) /* Endian mode (ro) */ +#define SSB_EXTIF_EXTSTAT_EIRQPIN (1 << 1) /* External interrupt pin (ro) */ +#define SSB_EXTIF_EXTSTAT_GPIOIRQPIN (1 << 2) /* GPIO interrupt pin (ro) */ +#define SSB_EXTIF_PCMCIA_CFG 0x0010 +#define SSB_EXTIF_PCMCIA_MEMWAIT 0x0014 +#define SSB_EXTIF_PCMCIA_ATTRWAIT 0x0018 +#define SSB_EXTIF_PCMCIA_IOWAIT 0x001C +#define SSB_EXTIF_PROG_CFG 0x0020 +#define SSB_EXTIF_PROG_WAITCNT 0x0024 +#define SSB_EXTIF_FLASH_CFG 0x0028 +#define SSB_EXTIF_FLASH_WAITCNT 0x002C +#define SSB_EXTIF_WATCHDOG 0x0040 +#define SSB_EXTIF_CLOCK_N 0x0044 +#define SSB_EXTIF_CLOCK_SB 0x0048 +#define SSB_EXTIF_CLOCK_PCI 0x004C +#define SSB_EXTIF_CLOCK_MII 0x0050 +#define SSB_EXTIF_GPIO_IN 0x0060 +#define SSB_EXTIF_GPIO_OUT_BASE 0x0064 +#define SSB_EXTIF_GPIO_OUTEN_BASE 0x0068 +#define SSB_EXTIF_EJTAG_OUTEN 0x0090 +#define SSB_EXTIF_GPIO_INTPOL 0x0094 +#define SSB_EXTIF_GPIO_INTMASK 0x0098 +#define SSB_EXTIF_UART_DATA 0x0300 +#define SSB_EXTIF_UART_TIMER 0x0310 +#define SSB_EXTIF_UART_FCR 0x0320 +#define SSB_EXTIF_UART_LCR 0x0330 +#define SSB_EXTIF_UART_MCR 0x0340 +#define SSB_EXTIF_UART_LSR 0x0350 +#define SSB_EXTIF_UART_MSR 0x0360 +#define SSB_EXTIF_UART_SCRATCH 0x0370 + + + + +/* pcmcia/prog/flash_config */ +#define SSB_EXTCFG_EN (1 << 0) /* enable */ +#define SSB_EXTCFG_MODE 0xE /* mode */ +#define SSB_EXTCFG_MODE_SHIFT 1 +#define SSB_EXTCFG_MODE_FLASH 0x0 /* flash/asynchronous mode */ +#define SSB_EXTCFG_MODE_SYNC 0x2 /* synchronous mode */ +#define SSB_EXTCFG_MODE_PCMCIA 0x4 /* pcmcia mode */ +#define SSB_EXTCFG_DS16 (1 << 4) /* destsize: 0=8bit, 1=16bit */ +#define SSB_EXTCFG_BSWAP (1 << 5) /* byteswap */ +#define SSB_EXTCFG_CLKDIV 0xC0 /* clock divider */ +#define SSB_EXTCFG_CLKDIV_SHIFT 6 +#define SSB_EXTCFG_CLKDIV_2 0x0 /* backplane/2 */ +#define SSB_EXTCFG_CLKDIV_3 0x40 /* backplane/3 */ +#define SSB_EXTCFG_CLKDIV_4 0x80 /* backplane/4 */ +#define SSB_EXTCFG_CLKEN (1 << 8) /* clock enable */ +#define SSB_EXTCFG_STROBE (1 << 9) /* size/bytestrobe (synch only) */ + +/* pcmcia_memwait */ +#define SSB_PCMCIA_MEMW_0 0x0000003F /* waitcount0 */ +#define SSB_PCMCIA_MEMW_1 0x00001F00 /* waitcount1 */ +#define SSB_PCMCIA_MEMW_1_SHIFT 8 +#define SSB_PCMCIA_MEMW_2 0x001F0000 /* waitcount2 */ +#define SSB_PCMCIA_MEMW_2_SHIFT 16 +#define SSB_PCMCIA_MEMW_3 0x1F000000 /* waitcount3 */ +#define SSB_PCMCIA_MEMW_3_SHIFT 24 + +/* pcmcia_attrwait */ +#define SSB_PCMCIA_ATTW_0 0x0000003F /* waitcount0 */ +#define SSB_PCMCIA_ATTW_1 0x00001F00 /* waitcount1 */ +#define SSB_PCMCIA_ATTW_1_SHIFT 8 +#define SSB_PCMCIA_ATTW_2 0x001F0000 /* waitcount2 */ +#define SSB_PCMCIA_ATTW_2_SHIFT 16 +#define SSB_PCMCIA_ATTW_3 0x1F000000 /* waitcount3 */ +#define SSB_PCMCIA_ATTW_3_SHIFT 24 + +/* pcmcia_iowait */ +#define SSB_PCMCIA_IOW_0 0x0000003F /* waitcount0 */ +#define SSB_PCMCIA_IOW_1 0x00001F00 /* waitcount1 */ +#define SSB_PCMCIA_IOW_1_SHIFT 8 +#define SSB_PCMCIA_IOW_2 0x001F0000 /* waitcount2 */ +#define SSB_PCMCIA_IOW_2_SHIFT 16 +#define SSB_PCMCIA_IOW_3 0x1F000000 /* waitcount3 */ +#define SSB_PCMCIA_IOW_3_SHIFT 24 + +/* prog_waitcount */ +#define SSB_PROG_WCNT_0 0x0000001F /* waitcount0 */ +#define SSB_PROG_WCNT_1 0x00001F00 /* waitcount1 */ +#define SSB_PROG_WCNT_1_SHIFT 8 +#define SSB_PROG_WCNT_2 0x001F0000 /* waitcount2 */ +#define SSB_PROG_WCNT_2_SHIFT 16 +#define SSB_PROG_WCNT_3 0x1F000000 /* waitcount3 */ +#define SSB_PROG_WCNT_3_SHIFT 24 + +#define SSB_PROG_W0 0x0000000C +#define SSB_PROG_W1 0x00000A00 +#define SSB_PROG_W2 0x00020000 +#define SSB_PROG_W3 0x01000000 + +/* flash_waitcount */ +#define SSB_FLASH_WCNT_0 0x0000001F /* waitcount0 */ +#define SSB_FLASH_WCNT_1 0x00001F00 /* waitcount1 */ +#define SSB_FLASH_WCNT_1_SHIFT 8 +#define SSB_FLASH_WCNT_2 0x001F0000 /* waitcount2 */ +#define SSB_FLASH_WCNT_2_SHIFT 16 +#define SSB_FLASH_WCNT_3 0x1F000000 /* waitcount3 */ +#define SSB_FLASH_WCNT_3_SHIFT 24 + +/* watchdog */ +#define SSB_EXTIF_WATCHDOG_CLK 48000000 /* Hz */ + + + +#ifdef CONFIG_SSB_DRIVER_EXTIF + +struct ssb_extif { + struct ssb_device *dev; +}; + +static inline bool ssb_extif_available(struct ssb_extif *extif) +{ + return (extif->dev != NULL); +} + +extern void ssb_extif_get_clockcontrol(struct ssb_extif *extif, + u32 *plltype, u32 *n, u32 *m); + +extern void ssb_extif_timing_init(struct ssb_extif *extif, + unsigned long ns); + +u32 ssb_extif_gpio_in(struct ssb_extif *extif, u32 mask); + +void ssb_extif_gpio_out(struct ssb_extif *extif, u32 mask, u32 value); + +void ssb_extif_gpio_outen(struct ssb_extif *extif, u32 mask, u32 value); + +#ifdef CONFIG_SSB_SERIAL +extern int ssb_extif_serial_init(struct ssb_extif *extif, + struct ssb_serial_port *ports); +#endif /* CONFIG_SSB_SERIAL */ + + +#else /* CONFIG_SSB_DRIVER_EXTIF */ +/* extif disabled */ + +struct ssb_extif { +}; + +static inline bool ssb_extif_available(struct ssb_extif *extif) +{ + return 0; +} + +static inline +void ssb_extif_get_clockcontrol(struct ssb_extif *extif, + u32 *plltype, u32 *n, u32 *m) +{ +} + +#endif /* CONFIG_SSB_DRIVER_EXTIF */ +#endif /* LINUX_SSB_EXTIFCORE_H_ */ diff --git a/target/linux/generic-2.6/files-2.6.23/include/linux/ssb/ssb_driver_mips.h b/target/linux/generic-2.6/files-2.6.23/include/linux/ssb/ssb_driver_mips.h new file mode 100644 index 0000000000..5f44e9740c --- /dev/null +++ b/target/linux/generic-2.6/files-2.6.23/include/linux/ssb/ssb_driver_mips.h @@ -0,0 +1,46 @@ +#ifndef LINUX_SSB_MIPSCORE_H_ +#define LINUX_SSB_MIPSCORE_H_ + +#ifdef CONFIG_SSB_DRIVER_MIPS + +struct ssb_device; + +struct ssb_serial_port { + void *regs; + unsigned long clockspeed; + unsigned int irq; + unsigned int baud_base; + unsigned int reg_shift; +}; + + +struct ssb_mipscore { + struct ssb_device *dev; + + int nr_serial_ports; + struct ssb_serial_port serial_ports[4]; + + u8 flash_buswidth; + u32 flash_window; + u32 flash_window_size; +}; + +extern void ssb_mipscore_init(struct ssb_mipscore *mcore); +extern u32 ssb_cpu_clock(struct ssb_mipscore *mcore); + +extern unsigned int ssb_mips_irq(struct ssb_device *dev); + + +#else /* CONFIG_SSB_DRIVER_MIPS */ + +struct ssb_mipscore { +}; + +static inline +void ssb_mipscore_init(struct ssb_mipscore *mcore) +{ +} + +#endif /* CONFIG_SSB_DRIVER_MIPS */ + +#endif /* LINUX_SSB_MIPSCORE_H_ */ diff --git a/target/linux/generic-2.6/files-2.6.23/include/linux/ssb/ssb_driver_pci.h b/target/linux/generic-2.6/files-2.6.23/include/linux/ssb/ssb_driver_pci.h new file mode 100644 index 0000000000..9cfffb7b1a --- /dev/null +++ b/target/linux/generic-2.6/files-2.6.23/include/linux/ssb/ssb_driver_pci.h @@ -0,0 +1,106 @@ +#ifndef LINUX_SSB_PCICORE_H_ +#define LINUX_SSB_PCICORE_H_ + +#ifdef CONFIG_SSB_DRIVER_PCICORE + +/* PCI core registers. */ +#define SSB_PCICORE_CTL 0x0000 /* PCI Control */ +#define SSB_PCICORE_CTL_RST_OE 0x00000001 /* PCI_RESET Output Enable */ +#define SSB_PCICORE_CTL_RST 0x00000002 /* PCI_RESET driven out to pin */ +#define SSB_PCICORE_CTL_CLK_OE 0x00000004 /* Clock gate Output Enable */ +#define SSB_PCICORE_CTL_CLK 0x00000008 /* Gate for clock driven out to pin */ +#define SSB_PCICORE_ARBCTL 0x0010 /* PCI Arbiter Control */ +#define SSB_PCICORE_ARBCTL_INTERN 0x00000001 /* Use internal arbiter */ +#define SSB_PCICORE_ARBCTL_EXTERN 0x00000002 /* Use external arbiter */ +#define SSB_PCICORE_ARBCTL_PARKID 0x00000006 /* Mask, selects which agent is parked on an idle bus */ +#define SSB_PCICORE_ARBCTL_PARKID_LAST 0x00000000 /* Last requestor */ +#define SSB_PCICORE_ARBCTL_PARKID_4710 0x00000002 /* 4710 */ +#define SSB_PCICORE_ARBCTL_PARKID_EXT0 0x00000004 /* External requestor 0 */ +#define SSB_PCICORE_ARBCTL_PARKID_EXT1 0x00000006 /* External requestor 1 */ +#define SSB_PCICORE_ISTAT 0x0020 /* Interrupt status */ +#define SSB_PCICORE_ISTAT_INTA 0x00000001 /* PCI INTA# */ +#define SSB_PCICORE_ISTAT_INTB 0x00000002 /* PCI INTB# */ +#define SSB_PCICORE_ISTAT_SERR 0x00000004 /* PCI SERR# (write to clear) */ +#define SSB_PCICORE_ISTAT_PERR 0x00000008 /* PCI PERR# (write to clear) */ +#define SSB_PCICORE_ISTAT_PME 0x00000010 /* PCI PME# */ +#define SSB_PCICORE_IMASK 0x0024 /* Interrupt mask */ +#define SSB_PCICORE_IMASK_INTA 0x00000001 /* PCI INTA# */ +#define SSB_PCICORE_IMASK_INTB 0x00000002 /* PCI INTB# */ +#define SSB_PCICORE_IMASK_SERR 0x00000004 /* PCI SERR# */ +#define SSB_PCICORE_IMASK_PERR 0x00000008 /* PCI PERR# */ +#define SSB_PCICORE_IMASK_PME 0x00000010 /* PCI PME# */ +#define SSB_PCICORE_MBOX 0x0028 /* Backplane to PCI Mailbox */ +#define SSB_PCICORE_MBOX_F0_0 0x00000100 /* PCI function 0, INT 0 */ +#define SSB_PCICORE_MBOX_F0_1 0x00000200 /* PCI function 0, INT 1 */ +#define SSB_PCICORE_MBOX_F1_0 0x00000400 /* PCI function 1, INT 0 */ +#define SSB_PCICORE_MBOX_F1_1 0x00000800 /* PCI function 1, INT 1 */ +#define SSB_PCICORE_MBOX_F2_0 0x00001000 /* PCI function 2, INT 0 */ +#define SSB_PCICORE_MBOX_F2_1 0x00002000 /* PCI function 2, INT 1 */ +#define SSB_PCICORE_MBOX_F3_0 0x00004000 /* PCI function 3, INT 0 */ +#define SSB_PCICORE_MBOX_F3_1 0x00008000 /* PCI function 3, INT 1 */ +#define SSB_PCICORE_BCAST_ADDR 0x0050 /* Backplane Broadcast Address */ +#define SSB_PCICORE_BCAST_ADDR_MASK 0x000000FF +#define SSB_PCICORE_BCAST_DATA 0x0054 /* Backplane Broadcast Data */ +#define SSB_PCICORE_GPIO_IN 0x0060 /* rev >= 2 only */ +#define SSB_PCICORE_GPIO_OUT 0x0064 /* rev >= 2 only */ +#define SSB_PCICORE_GPIO_ENABLE 0x0068 /* rev >= 2 only */ +#define SSB_PCICORE_GPIO_CTL 0x006C /* rev >= 2 only */ +#define SSB_PCICORE_SBTOPCI0 0x0100 /* Backplane to PCI translation 0 (sbtopci0) */ +#define SSB_PCICORE_SBTOPCI0_MASK 0xFC000000 +#define SSB_PCICORE_SBTOPCI1 0x0104 /* Backplane to PCI translation 1 (sbtopci1) */ +#define SSB_PCICORE_SBTOPCI1_MASK 0xFC000000 +#define SSB_PCICORE_SBTOPCI2 0x0108 /* Backplane to PCI translation 2 (sbtopci2) */ +#define SSB_PCICORE_SBTOPCI2_MASK 0xC0000000 + +/* SBtoPCIx */ +#define SSB_PCICORE_SBTOPCI_MEM 0x00000000 +#define SSB_PCICORE_SBTOPCI_IO 0x00000001 +#define SSB_PCICORE_SBTOPCI_CFG0 0x00000002 +#define SSB_PCICORE_SBTOPCI_CFG1 0x00000003 +#define SSB_PCICORE_SBTOPCI_PREF 0x00000004 /* Prefetch enable */ +#define SSB_PCICORE_SBTOPCI_BURST 0x00000008 /* Burst enable */ +#define SSB_PCICORE_SBTOPCI_MRM 0x00000020 /* Memory Read Multiple */ +#define SSB_PCICORE_SBTOPCI_RC 0x00000030 /* Read Command mask (rev >= 11) */ +#define SSB_PCICORE_SBTOPCI_RC_READ 0x00000000 /* Memory read */ +#define SSB_PCICORE_SBTOPCI_RC_READL 0x00000010 /* Memory read line */ +#define SSB_PCICORE_SBTOPCI_RC_READM 0x00000020 /* Memory read multiple */ + + +/* PCIcore specific boardflags */ +#define SSB_PCICORE_BFL_NOPCI 0x00000400 /* Board leaves PCI floating */ + + +struct ssb_pcicore { + struct ssb_device *dev; + u8 setup_done:1; + u8 hostmode:1; + u8 cardbusmode:1; +}; + +extern void ssb_pcicore_init(struct ssb_pcicore *pc); + +/* Enable IRQ routing for a specific device */ +extern int ssb_pcicore_dev_irqvecs_enable(struct ssb_pcicore *pc, + struct ssb_device *dev); + + +#else /* CONFIG_SSB_DRIVER_PCICORE */ + + +struct ssb_pcicore { +}; + +static inline +void ssb_pcicore_init(struct ssb_pcicore *pc) +{ +} + +static inline +int ssb_pcicore_dev_irqvecs_enable(struct ssb_pcicore *pc, + struct ssb_device *dev) +{ + return 0; +} + +#endif /* CONFIG_SSB_DRIVER_PCICORE */ +#endif /* LINUX_SSB_PCICORE_H_ */ diff --git a/target/linux/generic-2.6/files-2.6.23/include/linux/ssb/ssb_regs.h b/target/linux/generic-2.6/files-2.6.23/include/linux/ssb/ssb_regs.h new file mode 100644 index 0000000000..ebad0bac98 --- /dev/null +++ b/target/linux/generic-2.6/files-2.6.23/include/linux/ssb/ssb_regs.h @@ -0,0 +1,357 @@ +#ifndef LINUX_SSB_REGS_H_ +#define LINUX_SSB_REGS_H_ + + +/* SiliconBackplane Address Map. + * All regions may not exist on all chips. + */ +#define SSB_SDRAM_BASE 0x00000000U /* Physical SDRAM */ +#define SSB_PCI_MEM 0x08000000U /* Host Mode sb2pcitranslation0 (64 MB) */ +#define SSB_PCI_CFG 0x0c000000U /* Host Mode sb2pcitranslation1 (64 MB) */ +#define SSB_SDRAM_SWAPPED 0x10000000U /* Byteswapped Physical SDRAM */ +#define SSB_ENUM_BASE 0x18000000U /* Enumeration space base */ +#define SSB_ENUM_LIMIT 0x18010000U /* Enumeration space limit */ + +#define SSB_FLASH2 0x1c000000U /* Flash Region 2 (region 1 shadowed here) */ +#define SSB_FLASH2_SZ 0x02000000U /* Size of Flash Region 2 */ + +#define SSB_EXTIF_BASE 0x1f000000U /* External Interface region base address */ +#define SSB_FLASH1 0x1fc00000U /* Flash Region 1 */ +#define SSB_FLASH1_SZ 0x00400000U /* Size of Flash Region 1 */ + +#define SSB_PCI_DMA 0x40000000U /* Client Mode sb2pcitranslation2 (1 GB) */ +#define SSB_PCI_DMA_SZ 0x40000000U /* Client Mode sb2pcitranslation2 size in bytes */ +#define SSB_PCIE_DMA_L32 0x00000000U /* PCIE Client Mode sb2pcitranslation2 (2 ZettaBytes), low 32 bits */ +#define SSB_PCIE_DMA_H32 0x80000000U /* PCIE Client Mode sb2pcitranslation2 (2 ZettaBytes), high 32 bits */ +#define SSB_EUART (SSB_EXTIF_BASE + 0x00800000) +#define SSB_LED (SSB_EXTIF_BASE + 0x00900000) + + +/* Enumeration space constants */ +#define SSB_CORE_SIZE 0x1000 /* Size of a core MMIO area */ +#define SSB_MAX_NR_CORES ((SSB_ENUM_LIMIT - SSB_ENUM_BASE) / SSB_CORE_SIZE) + + +/* mips address */ +#define SSB_EJTAG 0xff200000 /* MIPS EJTAG space (2M) */ + + +/* SSB PCI config space registers. */ +#define SSB_PMCSR 0x44 +#define SSB_PE 0x100 +#define SSB_BAR0_WIN 0x80 /* Backplane address space 0 */ +#define SSB_BAR1_WIN 0x84 /* Backplane address space 1 */ +#define SSB_SPROMCTL 0x88 /* SPROM control */ +#define SSB_SPROMCTL_WE 0x10 /* SPROM write enable */ +#define SSB_BAR1_CONTROL 0x8c /* Address space 1 burst control */ +#define SSB_PCI_IRQS 0x90 /* PCI interrupts */ +#define SSB_PCI_IRQMASK 0x94 /* PCI IRQ control and mask (pcirev >= 6 only) */ +#define SSB_BACKPLANE_IRQS 0x98 /* Backplane Interrupts */ +#define SSB_GPIO_IN 0xB0 /* GPIO Input (pcirev >= 3 only) */ +#define SSB_GPIO_OUT 0xB4 /* GPIO Output (pcirev >= 3 only) */ +#define SSB_GPIO_OUT_ENABLE 0xB8 /* GPIO Output Enable/Disable (pcirev >= 3 only) */ +#define SSB_GPIO_SCS 0x10 /* PCI config space bit 4 for 4306c0 slow clock source */ +#define SSB_GPIO_HWRAD 0x20 /* PCI config space GPIO 13 for hw radio disable */ +#define SSB_GPIO_XTAL 0x40 /* PCI config space GPIO 14 for Xtal powerup */ +#define SSB_GPIO_PLL 0x80 /* PCI config space GPIO 15 for PLL powerdown */ + + +#define SSB_BAR0_MAX_RETRIES 50 + +/* Silicon backplane configuration register definitions */ +#define SSB_IPSFLAG 0x0F08 +#define SSB_IPSFLAG_IRQ1 0x0000003F /* which sbflags get routed to mips interrupt 1 */ +#define SSB_IPSFLAG_IRQ1_SHIFT 0 +#define SSB_IPSFLAG_IRQ2 0x00003F00 /* which sbflags get routed to mips interrupt 2 */ +#define SSB_IPSFLAG_IRQ2_SHIFT 8 +#define SSB_IPSFLAG_IRQ3 0x003F0000 /* which sbflags get routed to mips interrupt 3 */ +#define SSB_IPSFLAG_IRQ3_SHIFT 16 +#define SSB_IPSFLAG_IRQ4 0x3F000000 /* which sbflags get routed to mips interrupt 4 */ +#define SSB_IPSFLAG_IRQ4_SHIFT 24 +#define SSB_TPSFLAG 0x0F18 +#define SSB_TPSFLAG_BPFLAG 0x0000003F /* Backplane flag # */ +#define SSB_TPSFLAG_ALWAYSIRQ 0x00000040 /* IRQ is always sent on the Backplane */ +#define SSB_TMERRLOGA 0x0F48 +#define SSB_TMERRLOG 0x0F50 +#define SSB_ADMATCH3 0x0F60 +#define SSB_ADMATCH2 0x0F68 +#define SSB_ADMATCH1 0x0F70 +#define SSB_IMSTATE 0x0F90 /* SB Initiator Agent State */ +#define SSB_IMSTATE_PC 0x0000000f /* Pipe Count */ +#define SSB_IMSTATE_AP_MASK 0x00000030 /* Arbitration Priority */ +#define SSB_IMSTATE_AP_BOTH 0x00000000 /* Use both timeslices and token */ +#define SSB_IMSTATE_AP_TS 0x00000010 /* Use timeslices only */ +#define SSB_IMSTATE_AP_TK 0x00000020 /* Use token only */ +#define SSB_IMSTATE_AP_RSV 0x00000030 /* Reserved */ +#define SSB_IMSTATE_IBE 0x00020000 /* In Band Error */ +#define SSB_IMSTATE_TO 0x00040000 /* Timeout */ +#define SSB_INTVEC 0x0F94 /* SB Interrupt Mask */ +#define SSB_INTVEC_PCI 0x00000001 /* Enable interrupts for PCI */ +#define SSB_INTVEC_ENET0 0x00000002 /* Enable interrupts for enet 0 */ +#define SSB_INTVEC_ILINE20 0x00000004 /* Enable interrupts for iline20 */ +#define SSB_INTVEC_CODEC 0x00000008 /* Enable interrupts for v90 codec */ +#define SSB_INTVEC_USB 0x00000010 /* Enable interrupts for usb */ +#define SSB_INTVEC_EXTIF 0x00000020 /* Enable interrupts for external i/f */ +#define SSB_INTVEC_ENET1 0x00000040 /* Enable interrupts for enet 1 */ +#define SSB_TMSLOW 0x0F98 /* SB Target State Low */ +#define SSB_TMSLOW_RESET 0x00000001 /* Reset */ +#define SSB_TMSLOW_REJECT_22 0x00000002 /* Reject (Backplane rev 2.2) */ +#define SSB_TMSLOW_REJECT_23 0x00000004 /* Reject (Backplane rev 2.3) */ +#define SSB_TMSLOW_CLOCK 0x00010000 /* Clock Enable */ +#define SSB_TMSLOW_FGC 0x00020000 /* Force Gated Clocks On */ +#define SSB_TMSLOW_PE 0x40000000 /* Power Management Enable */ +#define SSB_TMSLOW_BE 0x80000000 /* BIST Enable */ +#define SSB_TMSHIGH 0x0F9C /* SB Target State High */ +#define SSB_TMSHIGH_SERR 0x00000001 /* S-error */ +#define SSB_TMSHIGH_INT 0x00000002 /* Interrupt */ +#define SSB_TMSHIGH_BUSY 0x00000004 /* Busy */ +#define SSB_TMSHIGH_TO 0x00000020 /* Timeout. Backplane rev >= 2.3 only */ +#define SSB_TMSHIGH_COREFL 0x1FFF0000 /* Core specific flags */ +#define SSB_TMSHIGH_COREFL_SHIFT 16 +#define SSB_TMSHIGH_DMA64 0x10000000 /* 64bit DMA supported */ +#define SSB_TMSHIGH_GCR 0x20000000 /* Gated Clock Request */ +#define SSB_TMSHIGH_BISTF 0x40000000 /* BIST Failed */ +#define SSB_TMSHIGH_BISTD 0x80000000 /* BIST Done */ +#define SSB_BWA0 0x0FA0 +#define SSB_IMCFGLO 0x0FA8 +#define SSB_IMCFGLO_SERTO 0x00000007 /* Service timeout */ +#define SSB_IMCFGLO_REQTO 0x00000070 /* Request timeout */ +#define SSB_IMCFGLO_REQTO_SHIFT 4 +#define SSB_IMCFGLO_CONNID 0x00FF0000 /* Connection ID */ +#define SSB_IMCFGLO_CONNID_SHIFT 16 +#define SSB_IMCFGHI 0x0FAC +#define SSB_ADMATCH0 0x0FB0 +#define SSB_TMCFGLO 0x0FB8 +#define SSB_TMCFGHI 0x0FBC +#define SSB_BCONFIG 0x0FC0 +#define SSB_BSTATE 0x0FC8 +#define SSB_ACTCFG 0x0FD8 +#define SSB_FLAGST 0x0FE8 +#define SSB_IDLOW 0x0FF8 +#define SSB_IDLOW_CFGSP 0x00000003 /* Config Space */ +#define SSB_IDLOW_ADDRNGE 0x00000038 /* Address Ranges supported */ +#define SSB_IDLOW_ADDRNGE_SHIFT 3 +#define SSB_IDLOW_SYNC 0x00000040 +#define SSB_IDLOW_INITIATOR 0x00000080 +#define SSB_IDLOW_MIBL 0x00000F00 /* Minimum Backplane latency */ +#define SSB_IDLOW_MIBL_SHIFT 8 +#define SSB_IDLOW_MABL 0x0000F000 /* Maximum Backplane latency */ +#define SSB_IDLOW_MABL_SHIFT 12 +#define SSB_IDLOW_TIF 0x00010000 /* This Initiator is first */ +#define SSB_IDLOW_CCW 0x000C0000 /* Cycle counter width */ +#define SSB_IDLOW_CCW_SHIFT 18 +#define SSB_IDLOW_TPT 0x00F00000 /* Target ports */ +#define SSB_IDLOW_TPT_SHIFT 20 +#define SSB_IDLOW_INITP 0x0F000000 /* Initiator ports */ +#define SSB_IDLOW_INITP_SHIFT 24 +#define SSB_IDLOW_SSBREV 0xF0000000 /* Sonics Backplane Revision code */ +#define SSB_IDLOW_SSBREV_22 0x00000000 /* <= 2.2 */ +#define SSB_IDLOW_SSBREV_23 0x10000000 /* 2.3 */ +#define SSB_IDLOW_SSBREV_24 0x40000000 /* ?? Found in BCM4328 */ +#define SSB_IDLOW_SSBREV_25 0x50000000 /* ?? Not Found yet */ +#define SSB_IDLOW_SSBREV_26 0x60000000 /* ?? Found in some BCM4311/2 */ +#define SSB_IDLOW_SSBREV_27 0x70000000 /* ?? Found in some BCM4311/2 */ +#define SSB_IDHIGH 0x0FFC /* SB Identification High */ +#define SSB_IDHIGH_RCLO 0x0000000F /* Revision Code (low part) */ +#define SSB_IDHIGH_CC 0x00008FF0 /* Core Code */ +#define SSB_IDHIGH_CC_SHIFT 4 +#define SSB_IDHIGH_RCHI 0x00007000 /* Revision Code (high part) */ +#define SSB_IDHIGH_RCHI_SHIFT 8 /* yes, shift 8 is right */ +#define SSB_IDHIGH_VC 0xFFFF0000 /* Vendor Code */ +#define SSB_IDHIGH_VC_SHIFT 16 + +/* SPROM shadow area. If not otherwise noted, fields are + * two bytes wide. Note that the SPROM can _only_ be read + * in two-byte quantinies. + */ +#define SSB_SPROMSIZE_WORDS 64 +#define SSB_SPROMSIZE_BYTES (SSB_SPROMSIZE_WORDS * sizeof(u16)) +#define SSB_SPROMSIZE_WORDS_R123 64 +#define SSB_SPROMSIZE_WORDS_R4 220 +#define SSB_SPROMSIZE_BYTES_R123 (SSB_SPROMSIZE_WORDS_R123 * sizeof(u16)) +#define SSB_SPROMSIZE_BYTES_R4 (SSB_SPROMSIZE_WORDS_R4 * sizeof(u16)) +#define SSB_SPROM_BASE 0x1000 +#define SSB_SPROM_REVISION 0x107E +#define SSB_SPROM_REVISION_REV 0x00FF /* SPROM Revision number */ +#define SSB_SPROM_REVISION_CRC 0xFF00 /* SPROM CRC8 value */ +#define SSB_SPROM_REVISION_CRC_SHIFT 8 + +/* SPROM Revision 1 */ +#define SSB_SPROM1_SPID 0x1004 /* Subsystem Product ID for PCI */ +#define SSB_SPROM1_SVID 0x1006 /* Subsystem Vendor ID for PCI */ +#define SSB_SPROM1_PID 0x1008 /* Product ID for PCI */ +#define SSB_SPROM1_IL0MAC 0x1048 /* 6 bytes MAC address for 802.11b/g */ +#define SSB_SPROM1_ET0MAC 0x104E /* 6 bytes MAC address for Ethernet */ +#define SSB_SPROM1_ET1MAC 0x1054 /* 6 bytes MAC address for 802.11a */ +#define SSB_SPROM1_ETHPHY 0x105A /* Ethernet PHY settings */ +#define SSB_SPROM1_ETHPHY_ET0A 0x001F /* MII Address for enet0 */ +#define SSB_SPROM1_ETHPHY_ET1A 0x03E0 /* MII Address for enet1 */ +#define SSB_SPROM1_ETHPHY_ET1A_SHIFT 5 +#define SSB_SPROM1_ETHPHY_ET0M (1<<14) /* MDIO for enet0 */ +#define SSB_SPROM1_ETHPHY_ET1M (1<<15) /* MDIO for enet1 */ +#define SSB_SPROM1_BINF 0x105C /* Board info */ +#define SSB_SPROM1_BINF_BREV 0x00FF /* Board Revision */ +#define SSB_SPROM1_BINF_CCODE 0x0F00 /* Country Code */ +#define SSB_SPROM1_BINF_CCODE_SHIFT 8 +#define SSB_SPROM1_BINF_ANTBG 0x3000 /* Available B-PHY and G-PHY antennas */ +#define SSB_SPROM1_BINF_ANTBG_SHIFT 12 +#define SSB_SPROM1_BINF_ANTA 0xC000 /* Available A-PHY antennas */ +#define SSB_SPROM1_BINF_ANTA_SHIFT 14 +#define SSB_SPROM1_PA0B0 0x105E +#define SSB_SPROM1_PA0B1 0x1060 +#define SSB_SPROM1_PA0B2 0x1062 +#define SSB_SPROM1_GPIOA 0x1064 /* General Purpose IO pins 0 and 1 */ +#define SSB_SPROM1_GPIOA_P0 0x00FF /* Pin 0 */ +#define SSB_SPROM1_GPIOA_P1 0xFF00 /* Pin 1 */ +#define SSB_SPROM1_GPIOA_P1_SHIFT 8 +#define SSB_SPROM1_GPIOB 0x1066 /* General Purpuse IO pins 2 and 3 */ +#define SSB_SPROM1_GPIOB_P2 0x00FF /* Pin 2 */ +#define SSB_SPROM1_GPIOB_P3 0xFF00 /* Pin 3 */ +#define SSB_SPROM1_GPIOB_P3_SHIFT 8 +#define SSB_SPROM1_MAXPWR 0x1068 /* Power Amplifier Max Power */ +#define SSB_SPROM1_MAXPWR_BG 0x00FF /* B-PHY and G-PHY (in dBm Q5.2) */ +#define SSB_SPROM1_MAXPWR_A 0xFF00 /* A-PHY (in dBm Q5.2) */ +#define SSB_SPROM1_MAXPWR_A_SHIFT 8 +#define SSB_SPROM1_PA1B0 0x106A +#define SSB_SPROM1_PA1B1 0x106C +#define SSB_SPROM1_PA1B2 0x106E +#define SSB_SPROM1_ITSSI 0x1070 /* Idle TSSI Target */ +#define SSB_SPROM1_ITSSI_BG 0x00FF /* B-PHY and G-PHY*/ +#define SSB_SPROM1_ITSSI_A 0xFF00 /* A-PHY */ +#define SSB_SPROM1_ITSSI_A_SHIFT 8 +#define SSB_SPROM1_BFLLO 0x1072 /* Boardflags (low 16 bits) */ +#define SSB_SPROM1_AGAIN 0x1074 /* Antenna Gain (in dBm Q5.2) */ +#define SSB_SPROM1_AGAIN_BG 0x00FF /* B-PHY and G-PHY */ +#define SSB_SPROM1_AGAIN_BG_SHIFT 0 +#define SSB_SPROM1_AGAIN_A 0xFF00 /* A-PHY */ +#define SSB_SPROM1_AGAIN_A_SHIFT 8 + +/* SPROM Revision 2 (inherits from rev 1) */ +#define SSB_SPROM2_BFLHI 0x1038 /* Boardflags (high 16 bits) */ +#define SSB_SPROM2_MAXP_A 0x103A /* A-PHY Max Power */ +#define SSB_SPROM2_MAXP_A_HI 0x00FF /* Max Power High */ +#define SSB_SPROM2_MAXP_A_LO 0xFF00 /* Max Power Low */ +#define SSB_SPROM2_MAXP_A_LO_SHIFT 8 +#define SSB_SPROM2_PA1LOB0 0x103C /* A-PHY PowerAmplifier Low Settings */ +#define SSB_SPROM2_PA1LOB1 0x103E /* A-PHY PowerAmplifier Low Settings */ +#define SSB_SPROM2_PA1LOB2 0x1040 /* A-PHY PowerAmplifier Low Settings */ +#define SSB_SPROM2_PA1HIB0 0x1042 /* A-PHY PowerAmplifier High Settings */ +#define SSB_SPROM2_PA1HIB1 0x1044 /* A-PHY PowerAmplifier High Settings */ +#define SSB_SPROM2_PA1HIB2 0x1046 /* A-PHY PowerAmplifier High Settings */ +#define SSB_SPROM2_OPO 0x1078 /* OFDM Power Offset from CCK Level */ +#define SSB_SPROM2_OPO_VALUE 0x00FF +#define SSB_SPROM2_OPO_UNUSED 0xFF00 +#define SSB_SPROM2_CCODE 0x107C /* Two char Country Code */ + +/* SPROM Revision 3 (inherits most data from rev 2) */ +#define SSB_SPROM3_IL0MAC 0x104A /* 6 bytes MAC address for 802.11b/g */ +#define SSB_SPROM3_ET0MAC 0x1050 /* 6 bytes MAC address for Ethernet ?? */ +#define SSB_SPROM3_ET1MAC 0x1050 /* 6 bytes MAC address for 802.11a ?? */ +#define SSB_SPROM3_OFDMAPO 0x102C /* A-PHY OFDM Mid Power Offset (4 bytes, BigEndian) */ +#define SSB_SPROM3_OFDMALPO 0x1030 /* A-PHY OFDM Low Power Offset (4 bytes, BigEndian) */ +#define SSB_SPROM3_OFDMAHPO 0x1034 /* A-PHY OFDM High Power Offset (4 bytes, BigEndian) */ +#define SSB_SPROM3_GPIOLDC 0x1042 /* GPIO LED Powersave Duty Cycle (4 bytes, BigEndian) */ +#define SSB_SPROM3_GPIOLDC_OFF 0x0000FF00 /* Off Count */ +#define SSB_SPROM3_GPIOLDC_OFF_SHIFT 8 +#define SSB_SPROM3_GPIOLDC_ON 0x00FF0000 /* On Count */ +#define SSB_SPROM3_GPIOLDC_ON_SHIFT 16 +#define SSB_SPROM3_CCKPO 0x1078 /* CCK Power Offset */ +#define SSB_SPROM3_CCKPO_1M 0x000F /* 1M Rate PO */ +#define SSB_SPROM3_CCKPO_2M 0x00F0 /* 2M Rate PO */ +#define SSB_SPROM3_CCKPO_2M_SHIFT 4 +#define SSB_SPROM3_CCKPO_55M 0x0F00 /* 5.5M Rate PO */ +#define SSB_SPROM3_CCKPO_55M_SHIFT 8 +#define SSB_SPROM3_CCKPO_11M 0xF000 /* 11M Rate PO */ +#define SSB_SPROM3_CCKPO_11M_SHIFT 12 +#define SSB_SPROM3_OFDMGPO 0x107A /* G-PHY OFDM Power Offset (4 bytes, BigEndian) */ + +/* SPROM Revision 4 */ +#define SSB_SPROM4_IL0MAC 0x104C /* 6 byte MAC address for a/b/g/n */ +#define SSB_SPROM4_ET0MAC 0x1018 /* 6 bytes MAC address for Ethernet ?? */ +#define SSB_SPROM4_ET1MAC 0x1018 /* 6 bytes MAC address for 802.11a ?? */ +#define SSB_SPROM4_ETHPHY 0x105A /* Ethernet PHY settings ?? */ +#define SSB_SPROM4_ETHPHY_ET0A 0x001F /* MII Address for enet0 */ +#define SSB_SPROM4_ETHPHY_ET1A 0x03E0 /* MII Address for enet1 */ +#define SSB_SPROM4_ETHPHY_ET1A_SHIFT 5 +#define SSB_SPROM4_ETHPHY_ET0M (1<<14) /* MDIO for enet0 */ +#define SSB_SPROM4_ETHPHY_ET1M (1<<15) /* MDIO for enet1 */ +#define SSB_SPROM4_CCODE 0x1052 /* Country Code (2 bytes) */ +#define SSB_SPROM4_ANTAVAIL 0x105D /* Antenna available bitfields */ +#define SSB_SPROM4_ANTAVAIL_A 0x00FF /* A-PHY bitfield */ +#define SSB_SPROM4_ANTAVAIL_A_SHIFT 0 +#define SSB_SPROM4_ANTAVAIL_BG 0xFF00 /* B-PHY and G-PHY bitfield */ +#define SSB_SPROM4_ANTAVAIL_BG_SHIFT 8 +#define SSB_SPROM4_BFLLO 0x1044 /* Boardflags (low 16 bits) */ +#define SSB_SPROM4_AGAIN01 0x105E /* Antenna Gain (in dBm Q5.2) */ +#define SSB_SPROM4_AGAIN0 0x00FF /* Antenna 0 */ +#define SSB_SPROM4_AGAIN0_SHIFT 0 +#define SSB_SPROM4_AGAIN1 0xFF00 /* Antenna 1 */ +#define SSB_SPROM4_AGAIN1_SHIFT 8 +#define SSB_SPROM4_AGAIN23 0x1060 +#define SSB_SPROM4_AGAIN2 0x00FF /* Antenna 2 */ +#define SSB_SPROM4_AGAIN2_SHIFT 0 +#define SSB_SPROM4_AGAIN3 0xFF00 /* Antenna 3 */ +#define SSB_SPROM4_AGAIN3_SHIFT 8 +#define SSB_SPROM4_BFLHI 0x1046 /* Board Flags Hi */ +#define SSB_SPROM4_MAXP_BG 0x1080 /* Max Power BG in path 1 */ +#define SSB_SPROM4_MAXP_BG_MASK 0x00FF /* Mask for Max Power BG */ +#define SSB_SPROM4_ITSSI_BG 0xFF00 /* Mask for path 1 itssi_bg */ +#define SSB_SPROM4_ITSSI_BG_SHIFT 8 +#define SSB_SPROM4_MAXP_A 0x108A /* Max Power A in path 1 */ +#define SSB_SPROM4_MAXP_A_MASK 0x00FF /* Mask for Max Power A */ +#define SSB_SPROM4_ITSSI_A 0xFF00 /* Mask for path 1 itssi_a */ +#define SSB_SPROM4_ITSSI_A_SHIFT 8 +#define SSB_SPROM4_GPIOA 0x1056 /* Gen. Purpose IO # 0 and 1 */ +#define SSB_SPROM4_GPIOA_P0 0x00FF /* Pin 0 */ +#define SSB_SPROM4_GPIOA_P1 0xFF00 /* Pin 1 */ +#define SSB_SPROM4_GPIOA_P1_SHIFT 8 +#define SSB_SPROM4_GPIOB 0x1058 /* Gen. Purpose IO # 2 and 3 */ +#define SSB_SPROM4_GPIOB_P2 0x00FF /* Pin 2 */ +#define SSB_SPROM4_GPIOB_P3 0xFF00 /* Pin 3 */ +#define SSB_SPROM4_GPIOB_P3_SHIFT 8 +#define SSB_SPROM4_PA0B0 0x1082 /* The paXbY locations are */ +#define SSB_SPROM4_PA0B1 0x1084 /* only guesses */ +#define SSB_SPROM4_PA0B2 0x1086 +#define SSB_SPROM4_PA1B0 0x108E +#define SSB_SPROM4_PA1B1 0x1090 +#define SSB_SPROM4_PA1B2 0x1092 + +/* Values for SSB_SPROM1_BINF_CCODE */ +enum { + SSB_SPROM1CCODE_WORLD = 0, + SSB_SPROM1CCODE_THAILAND, + SSB_SPROM1CCODE_ISRAEL, + SSB_SPROM1CCODE_JORDAN, + SSB_SPROM1CCODE_CHINA, + SSB_SPROM1CCODE_JAPAN, + SSB_SPROM1CCODE_USA_CANADA_ANZ, + SSB_SPROM1CCODE_EUROPE, + SSB_SPROM1CCODE_USA_LOW, + SSB_SPROM1CCODE_JAPAN_HIGH, + SSB_SPROM1CCODE_ALL, + SSB_SPROM1CCODE_NONE, +}; + +/* Address-Match values and masks (SSB_ADMATCHxxx) */ +#define SSB_ADM_TYPE 0x00000003 /* Address type */ +#define SSB_ADM_TYPE0 0 +#define SSB_ADM_TYPE1 1 +#define SSB_ADM_TYPE2 2 +#define SSB_ADM_AD64 0x00000004 +#define SSB_ADM_SZ0 0x000000F8 /* Type0 size */ +#define SSB_ADM_SZ0_SHIFT 3 +#define SSB_ADM_SZ1 0x000001F8 /* Type1 size */ +#define SSB_ADM_SZ1_SHIFT 3 +#define SSB_ADM_SZ2 0x000001F8 /* Type2 size */ +#define SSB_ADM_SZ2_SHIFT 3 +#define SSB_ADM_EN 0x00000400 /* Enable */ +#define SSB_ADM_NEG 0x00000800 /* Negative decode */ +#define SSB_ADM_BASE0 0xFFFFFF00 /* Type0 base address */ +#define SSB_ADM_BASE0_SHIFT 8 +#define SSB_ADM_BASE1 0xFFFFF000 /* Type1 base address for the core */ +#define SSB_ADM_BASE1_SHIFT 12 +#define SSB_ADM_BASE2 0xFFFF0000 /* Type2 base address for the core */ +#define SSB_ADM_BASE2_SHIFT 16 + + +#endif /* LINUX_SSB_REGS_H_ */ -- 2.30.2