From bac395ee42d6770c3e71f5e06bc1825a04cff224 Mon Sep 17 00:00:00 2001 From: Stefano Babic Date: Sun, 2 Oct 2011 12:58:03 +0200 Subject: [PATCH] MX5: vision2: use new pmic driver Switch to new pmic generic driver. Signed-off-by: Stefano Babic --- board/ttcontrol/vision2/vision2.c | 33 ++++++++++++++++++------------- include/configs/vision2.h | 5 ++++- 2 files changed, 23 insertions(+), 15 deletions(-) diff --git a/board/ttcontrol/vision2/vision2.c b/board/ttcontrol/vision2/vision2.c index e496f64312..d3815b2eed 100644 --- a/board/ttcontrol/vision2/vision2.c +++ b/board/ttcontrol/vision2/vision2.c @@ -34,6 +34,7 @@ #include #include #include +#include #include #include #include @@ -313,59 +314,63 @@ static void reset_peripherals(int reset) static void power_init_mx51(void) { unsigned int val; + struct pmic *p; + + pmic_init(); + p = get_pmic(); /* Write needed to Power Gate 2 register */ - val = pmic_reg_read(REG_POWER_MISC); + pmic_reg_read(p, REG_POWER_MISC, &val); /* enable VCAM with 2.775V to enable read from PMIC */ val = VCAMCONFIG | VCAMEN; - pmic_reg_write(REG_MODE_1, val); + pmic_reg_write(p, REG_MODE_1, val); /* * Set switchers in Auto in NORMAL mode & STANDBY mode * Setup the switcher mode for SW1 & SW2 */ - val = pmic_reg_read(REG_SW_4); + pmic_reg_read(p, REG_SW_4, &val); val = (val & ~((SWMODE_MASK << SWMODE1_SHIFT) | (SWMODE_MASK << SWMODE2_SHIFT))); val |= (SWMODE_AUTO_AUTO << SWMODE1_SHIFT) | (SWMODE_AUTO_AUTO << SWMODE2_SHIFT); - pmic_reg_write(REG_SW_4, val); + pmic_reg_write(p, REG_SW_4, val); /* Setup the switcher mode for SW3 & SW4 */ - val = pmic_reg_read(REG_SW_5); + pmic_reg_read(p, REG_SW_5, &val); val &= ~((SWMODE_MASK << SWMODE4_SHIFT) | (SWMODE_MASK << SWMODE3_SHIFT)); val |= (SWMODE_AUTO_AUTO << SWMODE4_SHIFT) | (SWMODE_AUTO_AUTO << SWMODE3_SHIFT); - pmic_reg_write(REG_SW_5, val); + pmic_reg_write(p, REG_SW_5, val); /* Set VGEN3 to 1.8V, VCAM to 3.0V */ - val = pmic_reg_read(REG_SETTING_0); + pmic_reg_read(p, REG_SETTING_0, &val); val &= ~(VCAM_MASK | VGEN3_MASK); val |= VCAM_3_0; - pmic_reg_write(REG_SETTING_0, val); + pmic_reg_write(p, REG_SETTING_0, val); /* Set VVIDEO to 2.775V, VAUDIO to 3V0, VSD to 1.8V */ - val = pmic_reg_read(REG_SETTING_1); + pmic_reg_read(p, REG_SETTING_1, &val); val &= ~(VVIDEO_MASK | VSD_MASK | VAUDIO_MASK); val |= VVIDEO_2_775 | VAUDIO_3_0 | VSD_1_8; - pmic_reg_write(REG_SETTING_1, val); + pmic_reg_write(p, REG_SETTING_1, val); /* Configure VGEN3 and VCAM regulators to use external PNP */ val = VGEN3CONFIG | VCAMCONFIG; - pmic_reg_write(REG_MODE_1, val); + pmic_reg_write(p, REG_MODE_1, val); udelay(200); /* Enable VGEN3, VCAM, VAUDIO, VVIDEO, VSD regulators */ val = VGEN3EN | VGEN3CONFIG | VCAMEN | VCAMCONFIG | VVIDEOEN | VAUDIOEN | VSDEN; - pmic_reg_write(REG_MODE_1, val); + pmic_reg_write(p, REG_MODE_1, val); - val = pmic_reg_read(REG_POWER_CTL2); + pmic_reg_read(p, REG_POWER_CTL2, &val); val |= WDIRESET; - pmic_reg_write(REG_POWER_CTL2, val); + pmic_reg_write(p, REG_POWER_CTL2, val); udelay(2500); diff --git a/include/configs/vision2.h b/include/configs/vision2.h index e411faa2b8..a2a9f3fb43 100644 --- a/include/configs/vision2.h +++ b/include/configs/vision2.h @@ -87,11 +87,14 @@ #define CONFIG_ENV_IS_IN_SPI_FLASH /* PMIC Controller */ -#define CONFIG_FSL_PMIC +#define CONFIG_PMIC +#define CONFIG_PMIC_SPI +#define CONFIG_PMIC_FSL #define CONFIG_FSL_PMIC_BUS 0 #define CONFIG_FSL_PMIC_CS 0 #define CONFIG_FSL_PMIC_CLK 2500000 #define CONFIG_FSL_PMIC_MODE SPI_MODE_0 +#define CONFIG_FSL_PMIC_BITLEN 32 #define CONFIG_RTC_MC13783 /* -- 2.30.2