From ba511f779a584f77b4b798fc40685bfe8d3d5163 Mon Sep 17 00:00:00 2001 From: Nagabhushana Netagunte Date: Sat, 3 Sep 2011 22:20:33 -0400 Subject: [PATCH] da850: fix the channel number for EMAC teardown init TX and RX channel numbers programmed as '1' during EMAC teardown initialization is wrong. This patch fixes the same by setting channel number to '0' which is used by U-boot. Signed-off-by: Sugumar Natarajan Signed-off-by: Nagabhushana Netagunte Signed-off-by: Sandeep Paulraj --- drivers/net/davinci_emac.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/net/davinci_emac.c b/drivers/net/davinci_emac.c index 66c0d13c2b..c0b8929258 100644 --- a/drivers/net/davinci_emac.c +++ b/drivers/net/davinci_emac.c @@ -457,7 +457,7 @@ static void davinci_eth_ch_teardown(int ch) if (ch == EMAC_CH_TX) { /* Init TX channel teardown */ - writel(1, &adap_emac->TXTEARDOWN); + writel(0, &adap_emac->TXTEARDOWN); do { /* * Wait here for Tx teardown completion interrupt to @@ -476,7 +476,7 @@ static void davinci_eth_ch_teardown(int ch) writel(0, &adap_emac->TX0HDP); } else { /* Init RX channel teardown */ - writel(1, &adap_emac->RXTEARDOWN); + writel(0, &adap_emac->RXTEARDOWN); do { /* * Wait here for Rx teardown completion interrupt to -- 2.30.2