From ba245d6bca4724506c4003166fc768a906fca3fb Mon Sep 17 00:00:00 2001 From: Felix Fietkau Date: Fri, 10 May 2024 17:39:56 +0200 Subject: [PATCH] mediatek: add firmware name for AQR PHYs on mt7988a-rfb Fixes PHY probe in case there is no firmware in a connected EEPROM Signed-off-by: Felix Fietkau --- .../arch/arm64/boot/dts/mediatek/mt7988a-rfb-eth1-aqr.dtso | 1 + .../arch/arm64/boot/dts/mediatek/mt7988a-rfb-eth2-aqr.dtso | 1 + 2 files changed, 2 insertions(+) diff --git a/target/linux/mediatek/files-6.6/arch/arm64/boot/dts/mediatek/mt7988a-rfb-eth1-aqr.dtso b/target/linux/mediatek/files-6.6/arch/arm64/boot/dts/mediatek/mt7988a-rfb-eth1-aqr.dtso index d21a61ad19..c471b9ed91 100644 --- a/target/linux/mediatek/files-6.6/arch/arm64/boot/dts/mediatek/mt7988a-rfb-eth1-aqr.dtso +++ b/target/linux/mediatek/files-6.6/arch/arm64/boot/dts/mediatek/mt7988a-rfb-eth1-aqr.dtso @@ -22,6 +22,7 @@ phy0: ethernet-phy@0 { reg = <0>; compatible = "ethernet-phy-ieee802.3-c45"; + firmware-name = "AQR-G4_v5.7.0-AQR_EVB_Generic_X3410_StdCfg_MDISwap_USX_ID46316_VER2140.cld"; reset-gpios = <&pio 72 GPIO_ACTIVE_LOW>; reset-assert-us = <100000>; reset-deassert-us = <221000>; diff --git a/target/linux/mediatek/files-6.6/arch/arm64/boot/dts/mediatek/mt7988a-rfb-eth2-aqr.dtso b/target/linux/mediatek/files-6.6/arch/arm64/boot/dts/mediatek/mt7988a-rfb-eth2-aqr.dtso index 140391fc45..1490f055b5 100644 --- a/target/linux/mediatek/files-6.6/arch/arm64/boot/dts/mediatek/mt7988a-rfb-eth2-aqr.dtso +++ b/target/linux/mediatek/files-6.6/arch/arm64/boot/dts/mediatek/mt7988a-rfb-eth2-aqr.dtso @@ -22,6 +22,7 @@ phy8: ethernet-phy@8 { reg = <8>; compatible = "ethernet-phy-ieee802.3-c45"; + firmware-name = "AQR-G4_v5.7.0-AQR_EVB_Generic_X3410_StdCfg_MDISwap_USX_ID46316_VER2140.cld"; reset-gpios = <&pio 71 GPIO_ACTIVE_LOW>; reset-assert-us = <100000>; reset-deassert-us = <221000>; -- 2.30.2