From b904725a112f7b7a1b5d657541d77dc8fa1a1615 Mon Sep 17 00:00:00 2001 From: Michal Simek Date: Mon, 30 Nov 2015 13:38:32 +0100 Subject: [PATCH] net: gem: Do not continue if phy is not found Add return value for phy detection algorithm to stop init function when phy is not found. Signed-off-by: Michal Simek Reviewed-by: Jagan Teki --- drivers/net/zynq_gem.c | 14 ++++++++++---- 1 file changed, 10 insertions(+), 4 deletions(-) diff --git a/drivers/net/zynq_gem.c b/drivers/net/zynq_gem.c index 858093f0d7..1a5a366c94 100644 --- a/drivers/net/zynq_gem.c +++ b/drivers/net/zynq_gem.c @@ -241,7 +241,7 @@ static u32 phywrite(struct eth_device *dev, u32 phy_addr, u32 regnum, u16 data) ZYNQ_GEM_PHYMNTNC_OP_W_MASK, &data); } -static void phy_detection(struct eth_device *dev) +static int phy_detection(struct eth_device *dev) { int i; u16 phyreg; @@ -254,7 +254,7 @@ static void phy_detection(struct eth_device *dev) /* Found a valid PHY address */ debug("Default phy address %d is valid\n", priv->phyaddr); - return; + return 0; } else { debug("PHY address is not setup correctly %d\n", priv->phyaddr); @@ -272,11 +272,12 @@ static void phy_detection(struct eth_device *dev) /* Found a valid PHY address */ priv->phyaddr = i; debug("Found valid phy address, %d\n", i); - return; + return 0; } } } printf("PHY is not detected\n"); + return -1; } static int zynq_gem_setup_mac(struct eth_device *dev) @@ -310,6 +311,7 @@ static int zynq_gem_setup_mac(struct eth_device *dev) static int zynq_gem_init(struct eth_device *dev, bd_t * bis) { u32 i; + int ret; unsigned long clk_rate = 0; struct phy_device *phydev; struct zynq_gem_regs *regs = (struct zynq_gem_regs *)dev->iobase; @@ -384,7 +386,11 @@ static int zynq_gem_init(struct eth_device *dev, bd_t * bis) priv->init++; } - phy_detection(dev); + ret = phy_detection(dev); + if (ret) { + printf("GEM PHY init failed\n"); + return ret; + } /* interface - look at tsec */ phydev = phy_connect(priv->bus, priv->phyaddr, dev, -- 2.30.2