From b8ab735253320dcb9432d941536a49640cdbd914 Mon Sep 17 00:00:00 2001 From: Alan Cox Date: Thu, 27 Aug 2009 11:01:42 +0100 Subject: [PATCH] Staging: et131x: kill the Q_ADDR struct Signed-off-by: Alan Cox Signed-off-by: Greg Kroah-Hartman --- drivers/staging/et131x/et1310_address_map.h | 48 +++++---------------- drivers/staging/et131x/et1310_jagcore.c | 41 ++++++++---------- drivers/staging/et131x/et131x_debug.c | 4 +- 3 files changed, 30 insertions(+), 63 deletions(-) diff --git a/drivers/staging/et131x/et1310_address_map.h b/drivers/staging/et131x/et1310_address_map.h index 5abaee918a04..b395f9c660e5 100644 --- a/drivers/staging/et131x/et1310_address_map.h +++ b/drivers/staging/et131x/et1310_address_map.h @@ -61,41 +61,13 @@ /* START OF GLOBAL REGISTER ADDRESS MAP */ -typedef union _Q_ADDR_t { - u32 value; - struct { -#ifdef _BIT_FIELDS_HTOL - u32 unused:22; /* bits 10-31 */ - u32 addr:10; /* bits 0-9 */ -#else - u32 addr:10; /* bits 0-9 */ - u32 unused:22; /* bits 10-31 */ -#endif - } bits; -} Q_ADDR_t, *PQ_ADDR_t; - /* - * structure for tx queue start address reg in global address map - * located at address 0x0000 - * Defined earlier (Q_ADDR_t) - */ - -/* - * structure for tx queue end address reg in global address map - * located at address 0x0004 - * Defined earlier (Q_ADDR_t) - */ - -/* - * structure for rx queue start address reg in global address map - * located at address 0x0008 - * Defined earlier (Q_ADDR_t) - */ - -/* - * structure for rx queue end address reg in global address map - * located at address 0x000C - * Defined earlier (Q_ADDR_t) + * 10bit registers + * + * Tx queue start address reg in global address map at address 0x0000 + * tx queue end address reg in global address map at address 0x0004 + * rx queue start address reg in global address map at address 0x0008 + * rx queue end address reg in global address map at address 0x000C */ /* @@ -295,10 +267,10 @@ typedef union _LOOPBACK_t { * Located at address 0x0000 */ typedef struct _GLOBAL_t { /* Location: */ - Q_ADDR_t txq_start_addr; /* 0x0000 */ - Q_ADDR_t txq_end_addr; /* 0x0004 */ - Q_ADDR_t rxq_start_addr; /* 0x0008 */ - Q_ADDR_t rxq_end_addr; /* 0x000C */ + u32 txq_start_addr; /* 0x0000 */ + u32 txq_end_addr; /* 0x0004 */ + u32 rxq_start_addr; /* 0x0008 */ + u32 rxq_end_addr; /* 0x000C */ PM_CSR_t pm_csr; /* 0x0010 */ u32 unused; /* 0x0014 */ INTERRUPT_t int_status; /* 0x0018 */ diff --git a/drivers/staging/et131x/et1310_jagcore.c b/drivers/staging/et131x/et1310_jagcore.c index 2767e4df0e62..47089bf59669 100644 --- a/drivers/staging/et131x/et1310_jagcore.c +++ b/drivers/staging/et131x/et1310_jagcore.c @@ -112,33 +112,26 @@ void ConfigGlobalRegs(struct et131x_adapter *etdev) * and Rx as it desires. Our default is to split it * 50/50: */ - writel(0, &pGbl->rxq_start_addr.value); - writel(PARM_RX_MEM_END_DEF, - &pGbl->rxq_end_addr.value); - writel(PARM_RX_MEM_END_DEF + 1, - &pGbl->txq_start_addr.value); - writel(INTERNAL_MEM_SIZE - 1, - &pGbl->txq_end_addr.value); + writel(0, &pGbl->rxq_start_addr); + writel(PARM_RX_MEM_END_DEF, &pGbl->rxq_end_addr); + writel(PARM_RX_MEM_END_DEF + 1, &pGbl->txq_start_addr); + writel(INTERNAL_MEM_SIZE - 1, &pGbl->txq_end_addr); } else if (etdev->RegistryJumboPacket < 8192) { /* For jumbo packets > 2k but < 8k, split 50-50. */ - writel(0, &pGbl->rxq_start_addr.value); - writel(INTERNAL_MEM_RX_OFFSET, - &pGbl->rxq_end_addr.value); - writel(INTERNAL_MEM_RX_OFFSET + 1, - &pGbl->txq_start_addr.value); - writel(INTERNAL_MEM_SIZE - 1, - &pGbl->txq_end_addr.value); + writel(0, &pGbl->rxq_start_addr); + writel(INTERNAL_MEM_RX_OFFSET, &pGbl->rxq_end_addr); + writel(INTERNAL_MEM_RX_OFFSET + 1, &pGbl->txq_start_addr); + writel(INTERNAL_MEM_SIZE - 1, &pGbl->txq_end_addr); } else { /* 9216 is the only packet size greater than 8k that * is available. The Tx buffer has to be big enough * for one whole packet on the Tx side. We'll make * the Tx 9408, and give the rest to Rx */ - writel(0x0000, &pGbl->rxq_start_addr.value); - writel(0x01b3, &pGbl->rxq_end_addr.value); - writel(0x01b4, &pGbl->txq_start_addr.value); - writel(INTERNAL_MEM_SIZE - 1, - &pGbl->txq_end_addr.value); + writel(0x0000, &pGbl->rxq_start_addr); + writel(0x01b3, &pGbl->rxq_end_addr); + writel(0x01b4, &pGbl->txq_start_addr); + writel(INTERNAL_MEM_SIZE - 1,&pGbl->txq_end_addr); } /* Initialize the loopback register. Disable all loopbacks. */ @@ -149,13 +142,13 @@ void ConfigGlobalRegs(struct et131x_adapter *etdev) * RxMAC will write data into the space, and the TxMAC will * read it out. */ - writel(0, &pGbl->rxq_start_addr.value); - writel(INTERNAL_MEM_SIZE - 1, &pGbl->rxq_end_addr.value); - writel(0, &pGbl->txq_start_addr.value); - writel(INTERNAL_MEM_SIZE - 1, &pGbl->txq_end_addr.value); + writel(0, &pGbl->rxq_start_addr); + writel(INTERNAL_MEM_SIZE - 1, &pGbl->rxq_end_addr); + writel(0, &pGbl->txq_start_addr); + writel(INTERNAL_MEM_SIZE - 1, &pGbl->txq_end_addr); /* Initialize the loopback register (MAC loopback). */ - writel(1, &pGbl->loopback.value); + writel(1, &pGbl->loopback); } /* MSI Register */ diff --git a/drivers/staging/et131x/et131x_debug.c b/drivers/staging/et131x/et131x_debug.c index 779130b44a7d..945b4b542ada 100644 --- a/drivers/staging/et131x/et131x_debug.c +++ b/drivers/staging/et131x/et131x_debug.c @@ -1,3 +1,4 @@ +/* * Agere Systems Inc. * 10/100/1000 Base-T Ethernet Driver for the ET1301 and ET131x series MACs * @@ -135,6 +136,8 @@ void DumpTxQueueContents(int debug, struct et131x_adapter *etdev) } } +#define NUM_BLOCKS 8 + static const char *BlockNames[NUM_BLOCKS] = { "Global", "Tx DMA", "Rx DMA", "Tx MAC", "Rx MAC", "MAC", "MAC Stat", "MMC" @@ -148,7 +151,6 @@ static const char *BlockNames[NUM_BLOCKS] = { * Dumps the first 64 regs of each block of the et-1310 (each block is * mapped to a new page, each page is 4096 bytes). */ -#define NUM_BLOCKS 8 void DumpDeviceBlock(int debug, struct et131x_adapter *etdev, u32 block) { -- 2.30.2