From b88bd95655c7bc059606529e01467594978d7b72 Mon Sep 17 00:00:00 2001 From: Tilman Schmidt Date: Wed, 13 May 2009 12:44:18 +0000 Subject: [PATCH] gigaset: remove UNDOCREQ config option Drop the kernel config option GIGASET_UNDOCREQ, permanently activating the code it controlled, as there have been no reports of problems caused by its activation but many problems caused by it being disabled. Also fix a few bad comments while we're at it. Impact: cleanup Signed-off-by: Tilman Schmidt Signed-off-by: David S. Miller --- Documentation/isdn/README.gigaset | 33 +++------------- drivers/isdn/gigaset/Kconfig | 7 ---- drivers/isdn/gigaset/usb-gigaset.c | 62 +++++++++++------------------- 3 files changed, 28 insertions(+), 74 deletions(-) diff --git a/Documentation/isdn/README.gigaset b/Documentation/isdn/README.gigaset index f6e9eaa75967..f9963103ae3d 100644 --- a/Documentation/isdn/README.gigaset +++ b/Documentation/isdn/README.gigaset @@ -149,10 +149,8 @@ GigaSet 307x Device Driver configuration files and chat scripts in the gigaset-VERSION/ppp directory in the driver packages from http://sourceforge.net/projects/gigaset307x/. Please note that the USB drivers are not able to change the state of the - control lines (the M105 driver can be configured to use some undocumented - control requests, if you really need the control lines, though). This means - you must use "Stupid Mode" if you are using wvdial or you should use the - nocrtscts option of pppd. + control lines. This means you must use "Stupid Mode" if you are using + wvdial or you should use the nocrtscts option of pppd. You must also assure that the ppp_async module is loaded with the parameter flag_time=0. You can do this e.g. by adding a line like @@ -190,20 +188,7 @@ GigaSet 307x Device Driver You can also use /sys/class/tty/ttyGxy/cidmode for changing the CID mode setting (ttyGxy is ttyGU0 or ttyGB0). -2.6. M105 Undocumented USB Requests - ------------------------------ - The Gigaset M105 USB data box understands a couple of useful, but - undocumented USB commands. These requests are not used in normal - operation (for wireless access to the base), but are needed for access - to the M105's own configuration mode (registration to the base, baudrate - and line format settings, device status queries) via the gigacontr - utility. Their use is controlled by the kernel configuration option - "Support for undocumented USB requests" (CONFIG_GIGASET_UNDOCREQ). If you - encounter error code -ENOTTY when trying to use some features of the - M105, try setting that option to "y" via 'make {x,menu}config' and - recompiling the driver. - -2.7. Unregistered Wireless Devices (M101/M105) +2.6. Unregistered Wireless Devices (M101/M105) ----------------------------------------- The main purpose of the ser_gigaset and usb_gigaset drivers is to allow the M101 and M105 wireless devices to be used as ISDN devices for ISDN @@ -215,8 +200,7 @@ GigaSet 307x Device Driver driver. In that situation, a restricted set of functions is available which includes, in particular, those necessary for registering the device to a base or for switching it between Fixed Part and Portable Part - modes. For the M105, these commands require the "Support for undocumented - USB requests" configuration option (see section 2.6.) to be enabled. + modes. 3. Troubleshooting --------------- @@ -246,20 +230,13 @@ GigaSet 307x Device Driver Solution: Select Unimodem mode for all DECT data adapters. (see section 2.4.) - Problem: - You want to configure your USB DECT data adapter (M105) but gigacontr - reports an error: "/dev/ttyGU0: Inappropriate ioctl for device". - Solution: - Recompile the usb_gigaset driver with the kernel configuration option - CONFIG_GIGASET_UNDOCREQ set to 'y'. (see section 2.6.) - Problem: Messages like this: usb_gigaset 3-2:1.0: Could not initialize the device. appear in your syslog. Solution: Check whether your M10x wireless device is correctly registered to the - Gigaset base. (see section 2.7.) + Gigaset base. (see section 2.6.) 3.2. Telling the driver to provide more information ---------------------------------------------- diff --git a/drivers/isdn/gigaset/Kconfig b/drivers/isdn/gigaset/Kconfig index 754b90d412e4..18ab8652aa57 100644 --- a/drivers/isdn/gigaset/Kconfig +++ b/drivers/isdn/gigaset/Kconfig @@ -43,11 +43,4 @@ config GIGASET_DEBUG This enables debugging code in the Gigaset drivers. If in doubt, say yes. -config GIGASET_UNDOCREQ - bool "Support for undocumented USB requests" - help - This enables support for USB requests we only know from - reverse engineering (currently M105 only). If you need - features like configuration mode of M105, say yes. - endif # ISDN_DRV_GIGASET diff --git a/drivers/isdn/gigaset/usb-gigaset.c b/drivers/isdn/gigaset/usb-gigaset.c index d78385166099..4deb1ab0dbf8 100644 --- a/drivers/isdn/gigaset/usb-gigaset.c +++ b/drivers/isdn/gigaset/usb-gigaset.c @@ -153,8 +153,6 @@ static inline unsigned tiocm_to_gigaset(unsigned state) return ((state & TIOCM_DTR) ? 1 : 0) | ((state & TIOCM_RTS) ? 2 : 0); } -#ifdef CONFIG_GIGASET_UNDOCREQ -/* WARNING: EXPERIMENTAL! */ static int gigaset_set_modem_ctrl(struct cardstate *cs, unsigned old_state, unsigned new_state) { @@ -176,6 +174,11 @@ static int gigaset_set_modem_ctrl(struct cardstate *cs, unsigned old_state, return 0; } +/* + * Set M105 configuration value + * using undocumented device commands reverse engineered from USB traces + * of the Siemens Windows driver + */ static int set_value(struct cardstate *cs, u8 req, u16 val) { struct usb_device *udev = cs->hw.usb->udev; @@ -205,8 +208,10 @@ static int set_value(struct cardstate *cs, u8 req, u16 val) return r < 0 ? r : (r2 < 0 ? r2 : 0); } -/* WARNING: HIGHLY EXPERIMENTAL! */ -// don't use this in an interrupt/BH +/* + * set the baud rate on the internal serial adapter + * using the undocumented parameter setting command + */ static int gigaset_baud_rate(struct cardstate *cs, unsigned cflag) { u16 val; @@ -237,8 +242,10 @@ static int gigaset_baud_rate(struct cardstate *cs, unsigned cflag) return set_value(cs, 1, val); } -/* WARNING: HIGHLY EXPERIMENTAL! */ -// don't use this in an interrupt/BH +/* + * set the line format on the internal serial adapter + * using the undocumented parameter setting command + */ static int gigaset_set_line_ctrl(struct cardstate *cs, unsigned cflag) { u16 val = 0; @@ -274,24 +281,6 @@ static int gigaset_set_line_ctrl(struct cardstate *cs, unsigned cflag) return set_value(cs, 3, val); } -#else -static int gigaset_set_modem_ctrl(struct cardstate *cs, unsigned old_state, - unsigned new_state) -{ - return -ENOTTY; -} - -static int gigaset_set_line_ctrl(struct cardstate *cs, unsigned cflag) -{ - return -ENOTTY; -} - -static int gigaset_baud_rate(struct cardstate *cs, unsigned cflag) -{ - return -ENOTTY; -} -#endif - /*================================================================================================================*/ static int gigaset_init_bchannel(struct bc_state *bcs) @@ -362,10 +351,8 @@ static void gigaset_modem_fill(unsigned long data) } while (again); } -/** - * gigaset_read_int_callback - * - * It is called if the data was received from the device. +/* + * Interrupt Input URB completion routine */ static void gigaset_read_int_callback(struct urb *urb) { @@ -567,18 +554,19 @@ static int gigaset_chars_in_buffer(struct cardstate *cs) return cs->cmdbytes; } +/* + * set the break characters on the internal serial adapter + * using undocumented device commands reverse engineered from USB traces + * of the Siemens Windows driver + */ static int gigaset_brkchars(struct cardstate *cs, const unsigned char buf[6]) { -#ifdef CONFIG_GIGASET_UNDOCREQ struct usb_device *udev = cs->hw.usb->udev; gigaset_dbg_buffer(DEBUG_USBREQ, "brkchars", 6, buf); memcpy(cs->hw.usb->bchars, buf, 6); return usb_control_msg(udev, usb_sndctrlpipe(udev, 0), 0x19, 0x41, 0, 0, &buf, 6, 2000); -#else - return -ENOTTY; -#endif } static int gigaset_freebcshw(struct bc_state *bcs) @@ -625,7 +613,6 @@ static int gigaset_initcshw(struct cardstate *cs) ucs->bchars[5] = 0x13; ucs->bulk_out_buffer = NULL; ucs->bulk_out_urb = NULL; - //ucs->urb_cmd_out = NULL; ucs->read_urb = NULL; tasklet_init(&cs->write_tasklet, &gigaset_modem_fill, (unsigned long) cs); @@ -742,7 +729,7 @@ static int gigaset_probe(struct usb_interface *interface, cs->dev = &interface->dev; /* save address of controller structure */ - usb_set_intfdata(interface, cs); // dev_set_drvdata(&interface->dev, cs); + usb_set_intfdata(interface, cs); endpoint = &hostif->endpoint[0].desc; @@ -921,8 +908,7 @@ static const struct gigaset_ops ops = { gigaset_m10x_input, }; -/** - * usb_gigaset_init +/* * This function is called while kernel-module is loaded */ static int __init usb_gigaset_init(void) @@ -952,9 +938,7 @@ error: return -1; } - -/** - * usb_gigaset_exit +/* * This function is called while unloading the kernel-module */ static void __exit usb_gigaset_exit(void) -- 2.30.2