From b6fbca2af36530ef307069cff0fe3b1f387c00a9 Mon Sep 17 00:00:00 2001 From: Bruce Allan Date: Fri, 16 Dec 2011 00:45:56 +0000 Subject: [PATCH] e1000e: default IntMode based on kernel config & available hardware support Based on a patch from Prabhakar Kushwaha , set appropriate default interrupt mode dependent on whether CONFIG_PCI_MSI is enabled in the kernel configuration and if the hardware supports MSI-X. Set the module parameter log message accordingly. Signed-off-by: Bruce Allan Cc: Jin Qing Cc: Prabhakar Kushwaha Cc: Jin Qing Cc: Kumar Gala Tested-by: Aaron Brown Signed-off-by: Jeff Kirsher --- drivers/net/ethernet/intel/e1000e/param.c | 48 +++++++++++++++++++---- 1 file changed, 41 insertions(+), 7 deletions(-) diff --git a/drivers/net/ethernet/intel/e1000e/param.c b/drivers/net/ethernet/intel/e1000e/param.c index 20e93b08e7f3..40664f5bfbda 100644 --- a/drivers/net/ethernet/intel/e1000e/param.c +++ b/drivers/net/ethernet/intel/e1000e/param.c @@ -113,11 +113,20 @@ E1000_PARAM(InterruptThrottleRate, "Interrupt Throttling Rate"); #define MAX_ITR 100000 #define MIN_ITR 100 -/* IntMode (Interrupt Mode) +/* + * IntMode (Interrupt Mode) + * + * Valid Range: varies depending on kernel configuration & hardware support + * + * legacy=0, MSI=1, MSI-X=2 * - * Valid Range: 0 - 2 + * When MSI/MSI-X support is enabled in kernel- + * Default Value: 2 (MSI-X) when supported by hardware, 1 (MSI) otherwise + * When MSI/MSI-X support is not enabled in kernel- + * Default Value: 0 (legacy) * - * Default Value: 2 (MSI-X) + * When a mode is specified that is not allowed/supported, it will be + * demoted to the most advanced interrupt mode available. */ E1000_PARAM(IntMode, "Interrupt Mode"); #define MAX_INTMODE 2 @@ -388,12 +397,33 @@ void __devinit e1000e_check_options(struct e1000_adapter *adapter) static struct e1000_option opt = { .type = range_option, .name = "Interrupt Mode", - .err = "defaulting to 2 (MSI-X)", - .def = E1000E_INT_MODE_MSIX, - .arg = { .r = { .min = MIN_INTMODE, - .max = MAX_INTMODE } } +#ifndef CONFIG_PCI_MSI + .err = "defaulting to 0 (legacy)", + .def = E1000E_INT_MODE_LEGACY, + .arg = { .r = { .min = 0, + .max = 0 } } +#endif }; +#ifdef CONFIG_PCI_MSI + if (adapter->flags & FLAG_HAS_MSIX) { + opt.err = kstrdup("defaulting to 2 (MSI-X)", + GFP_KERNEL); + opt.def = E1000E_INT_MODE_MSIX; + opt.arg.r.max = E1000E_INT_MODE_MSIX; + } else { + opt.err = kstrdup("defaulting to 1 (MSI)", GFP_KERNEL); + opt.def = E1000E_INT_MODE_MSI; + opt.arg.r.max = E1000E_INT_MODE_MSI; + } + + if (!opt.err) { + dev_err(&adapter->pdev->dev, + "Failed to allocate memory\n"); + return; + } +#endif + if (num_IntMode > bd) { unsigned int int_mode = IntMode[bd]; e1000_validate_option(&int_mode, &opt, adapter); @@ -401,6 +431,10 @@ void __devinit e1000e_check_options(struct e1000_adapter *adapter) } else { adapter->int_mode = opt.def; } + +#ifdef CONFIG_PCI_MSI + kfree(opt.err); +#endif } { /* Smart Power Down */ static const struct e1000_option opt = { -- 2.30.2