From b66037f53bf3d943e23cad01986ba079cecb41cd Mon Sep 17 00:00:00 2001 From: =?utf8?q?Rafa=C5=82=20Mi=C5=82ecki?= Date: Thu, 10 Nov 2022 09:28:23 +0100 Subject: [PATCH] bcm53xx: update DTS files with the latest changes MIME-Version: 1.0 Content-Type: text/plain; charset=utf8 Content-Transfer-Encoding: 8bit Signed-off-by: Rafał Miłecki (cherry picked from commit 8cdafa149eda4e343905ccf00cad34ff2b52c85b) --- ...301X-Update-pin-controller-node-name.patch | 32 + ...M5301X-Fix-DTC-warning-for-NAND-node.patch | 31 + ...-Remove-cell-properties-from-srab-po.patch | 40 + ...-Add-rgmii-to-port-5-of-Broadcom-swi.patch | 29 + ...-Retrieve-gmac1-MAC-address-from-NVR.patch | 43 + ...-Fix-compatible-strings-for-BCM53012.patch | 65 ++ ...-Disable-gmac0-and-enable-port-8-on-.patch | 39 + ...BCM5301X-Add-DT-for-WZR-1166DHP-DHP2.patch | 300 ++++++ ...CM5301X-Fix-DTC-warning-for-NAND-nod.patch | 32 + ...-align-gpio-key-node-names-with-dtsc.patch | 912 ++++++++++++++++++ ...roadcom-correct-gpio-keys-properties.patch | 108 +++ ...-Correct-description-of-TP-Link-part.patch | 99 ++ ...4-Add-devicetree-for-D-Link-DIR-890L.patch | 242 +++++ ...-Add-devicetree-for-D-Link-DWL-8610A.patch | 165 ++++ ...-Specify-switch-ports-for-remaining-.patch | 10 +- ...RM-BCM5301X-Add-DT-for-Netgear-R7900.patch | 2 +- .../331-Meraki-MR32-Status-LEDs.patch | 2 +- 17 files changed, 2144 insertions(+), 7 deletions(-) create mode 100644 target/linux/bcm53xx/patches-5.10/036-v5.19-0001-ARM-dts-BCM5301X-Update-pin-controller-node-name.patch create mode 100644 target/linux/bcm53xx/patches-5.10/036-v5.19-0002-ARM-dts-BCM5301X-Fix-DTC-warning-for-NAND-node.patch create mode 100644 target/linux/bcm53xx/patches-5.10/036-v5.19-0003-ARM-dts-BCM5301X-Remove-cell-properties-from-srab-po.patch create mode 100644 target/linux/bcm53xx/patches-5.10/036-v5.19-0004-ARM-dts-BCM5301X-Add-rgmii-to-port-5-of-Broadcom-swi.patch create mode 100644 target/linux/bcm53xx/patches-5.10/036-v5.19-0005-ARM-dts-BCM5301X-Retrieve-gmac1-MAC-address-from-NVR.patch create mode 100644 target/linux/bcm53xx/patches-5.10/036-v5.19-0006-ARM-dts-BCM5301X-Fix-compatible-strings-for-BCM53012.patch create mode 100644 target/linux/bcm53xx/patches-5.10/036-v5.19-0007-ARM-dts-BCM5301X-Disable-gmac0-and-enable-port-8-on-.patch create mode 100644 target/linux/bcm53xx/patches-5.10/036-v5.19-0008-ARM-dts-BCM5301X-Add-DT-for-WZR-1166DHP-DHP2.patch create mode 100644 target/linux/bcm53xx/patches-5.10/036-v5.19-0009-Revert-ARM-dts-BCM5301X-Fix-DTC-warning-for-NAND-nod.patch create mode 100644 target/linux/bcm53xx/patches-5.10/037-v6.0-0001-ARM-dts-broadcom-align-gpio-key-node-names-with-dtsc.patch create mode 100644 target/linux/bcm53xx/patches-5.10/037-v6.0-0002-ARM-dts-broadcom-correct-gpio-keys-properties.patch create mode 100644 target/linux/bcm53xx/patches-5.10/038-v6.1-0001-ARM-dts-BCM5301X-Correct-description-of-TP-Link-part.patch create mode 100644 target/linux/bcm53xx/patches-5.10/038-v6.1-0001-ARM-dts-bcm47094-Add-devicetree-for-D-Link-DIR-890L.patch create mode 100644 target/linux/bcm53xx/patches-5.10/038-v6.1-0001-ARM-dts-bcm53016-Add-devicetree-for-D-Link-DWL-8610A.patch diff --git a/target/linux/bcm53xx/patches-5.10/036-v5.19-0001-ARM-dts-BCM5301X-Update-pin-controller-node-name.patch b/target/linux/bcm53xx/patches-5.10/036-v5.19-0001-ARM-dts-BCM5301X-Update-pin-controller-node-name.patch new file mode 100644 index 0000000000..690abb9270 --- /dev/null +++ b/target/linux/bcm53xx/patches-5.10/036-v5.19-0001-ARM-dts-BCM5301X-Update-pin-controller-node-name.patch @@ -0,0 +1,32 @@ +From 130b5e32ba9d2d2313e39cf3f6d0729bff02b76a Mon Sep 17 00:00:00 2001 +From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= +Date: Wed, 30 Mar 2022 14:05:27 +0200 +Subject: [PATCH] ARM: dts: BCM5301X: Update pin controller node name +MIME-Version: 1.0 +Content-Type: text/plain; charset=UTF-8 +Content-Transfer-Encoding: 8bit + +This fixes: +arch/arm/boot/dts/bcm4708-asus-rt-ac56u.dtb: cru-bus@100: 'pin-controller@1c0' does not match any of the regexes: '^clock-controller@[a-f0-9]+$', '^phy@[a-f0-9]+$', '^pinctrl@[a-f0-9]+$', '^syscon@[a-f0-9]+$', '^thermal@[a-f0-9]+$' + From schema: Documentation/devicetree/bindings/mfd/brcm,cru.yaml +arch/arm/boot/dts/bcm4708-asus-rt-ac56u.dtb: pin-controller@1c0: $nodename:0: 'pin-controller@1c0' does not match '^(pinctrl|pinmux)(@[0-9a-f]+)?$' + From schema: Documentation/devicetree/bindings/pinctrl/brcm,ns-pinmux.yaml + +Ref: e7391b021e3f ("dt-bindings: mfd: brcm,cru: Rename pinctrl node") +Signed-off-by: Rafał Miłecki +Signed-off-by: Florian Fainelli +--- + arch/arm/boot/dts/bcm5301x.dtsi | 2 +- + 1 file changed, 1 insertion(+), 1 deletion(-) + +--- a/arch/arm/boot/dts/bcm5301x.dtsi ++++ b/arch/arm/boot/dts/bcm5301x.dtsi +@@ -455,7 +455,7 @@ + reg = <0x180 0x4>; + }; + +- pinctrl: pin-controller@1c0 { ++ pinctrl: pinctrl@1c0 { + compatible = "brcm,bcm4708-pinmux"; + reg = <0x1c0 0x24>; + reg-names = "cru_gpio_control"; diff --git a/target/linux/bcm53xx/patches-5.10/036-v5.19-0002-ARM-dts-BCM5301X-Fix-DTC-warning-for-NAND-node.patch b/target/linux/bcm53xx/patches-5.10/036-v5.19-0002-ARM-dts-BCM5301X-Fix-DTC-warning-for-NAND-node.patch new file mode 100644 index 0000000000..e61fef8aab --- /dev/null +++ b/target/linux/bcm53xx/patches-5.10/036-v5.19-0002-ARM-dts-BCM5301X-Fix-DTC-warning-for-NAND-node.patch @@ -0,0 +1,31 @@ +From 90103611d573c5c238350f9b1d7cb682c62f5681 Mon Sep 17 00:00:00 2001 +From: =?UTF-8?q?Ar=C4=B1n=C3=A7=20=C3=9CNAL?= +Date: Fri, 1 Apr 2022 13:19:58 +0300 +Subject: [PATCH] ARM: dts: BCM5301X: Fix DTC warning for NAND node +MIME-Version: 1.0 +Content-Type: text/plain; charset=UTF-8 +Content-Transfer-Encoding: 8bit + +Remove the unnecessary #address-cells and #size-cells properties on the +nand@0 node to fix the warning below. + +Warning (avoid_unnecessary_addr_size): /nand-controller@18028000/nand@0: unnecessary #address-cells/#size-cells without "ranges" or child "reg" property + +Signed-off-by: Arınç ÜNAL +Acked-by: Rafał Miłecki +Signed-off-by: Florian Fainelli +--- + arch/arm/boot/dts/bcm5301x-nand-cs0.dtsi | 2 -- + 1 file changed, 2 deletions(-) + +--- a/arch/arm/boot/dts/bcm5301x-nand-cs0.dtsi ++++ b/arch/arm/boot/dts/bcm5301x-nand-cs0.dtsi +@@ -10,8 +10,6 @@ + nandcs: nand@0 { + compatible = "brcm,nandcs"; + reg = <0>; +- #address-cells = <1>; +- #size-cells = <1>; + + partitions { + compatible = "brcm,bcm947xx-cfe-partitions"; diff --git a/target/linux/bcm53xx/patches-5.10/036-v5.19-0003-ARM-dts-BCM5301X-Remove-cell-properties-from-srab-po.patch b/target/linux/bcm53xx/patches-5.10/036-v5.19-0003-ARM-dts-BCM5301X-Remove-cell-properties-from-srab-po.patch new file mode 100644 index 0000000000..6ef8720b1d --- /dev/null +++ b/target/linux/bcm53xx/patches-5.10/036-v5.19-0003-ARM-dts-BCM5301X-Remove-cell-properties-from-srab-po.patch @@ -0,0 +1,40 @@ +From e5ff0a7aab3ef5dd8ec7636b936c95179aa5ddfa Mon Sep 17 00:00:00 2001 +From: =?UTF-8?q?Ar=C4=B1n=C3=A7=20=C3=9CNAL?= +Date: Fri, 1 Apr 2022 13:19:59 +0300 +Subject: [PATCH] ARM: dts: BCM5301X: Remove cell properties from srab ports on + Asus RT-AC88U +MIME-Version: 1.0 +Content-Type: text/plain; charset=UTF-8 +Content-Transfer-Encoding: 8bit + +Remove #address-cells and #size-cells properties from the ports node of +&srab. They are already defined on bcm5301x.dtsi, there's no need to define +them again. + +Signed-off-by: Arınç ÜNAL +Acked-by: Rafał Miłecki +Signed-off-by: Florian Fainelli +--- + arch/arm/boot/dts/bcm47094-asus-rt-ac88u.dts | 5 +---- + 1 file changed, 1 insertion(+), 4 deletions(-) + +--- a/arch/arm/boot/dts/bcm47094-asus-rt-ac88u.dts ++++ b/arch/arm/boot/dts/bcm47094-asus-rt-ac88u.dts +@@ -1,6 +1,6 @@ + // SPDX-License-Identifier: GPL-2.0-or-later OR MIT + /* +- * Copyright (C) 2021 Arınç ÜNAL ++ * Copyright (C) 2021-2022 Arınç ÜNAL + */ + + /dts-v1/; +@@ -177,9 +177,6 @@ + dsa,member = <0 0>; + + ports { +- #address-cells = <1>; +- #size-cells = <0>; +- + port@0 { + reg = <0>; + label = "lan4"; diff --git a/target/linux/bcm53xx/patches-5.10/036-v5.19-0004-ARM-dts-BCM5301X-Add-rgmii-to-port-5-of-Broadcom-swi.patch b/target/linux/bcm53xx/patches-5.10/036-v5.19-0004-ARM-dts-BCM5301X-Add-rgmii-to-port-5-of-Broadcom-swi.patch new file mode 100644 index 0000000000..aa192b3a11 --- /dev/null +++ b/target/linux/bcm53xx/patches-5.10/036-v5.19-0004-ARM-dts-BCM5301X-Add-rgmii-to-port-5-of-Broadcom-swi.patch @@ -0,0 +1,29 @@ +From 4b7a67420a34ebd8fbf0111221a8bfd8001d418d Mon Sep 17 00:00:00 2001 +From: =?UTF-8?q?Ar=C4=B1n=C3=A7=20=C3=9CNAL?= +Date: Fri, 1 Apr 2022 13:20:00 +0300 +Subject: [PATCH] ARM: dts: BCM5301X: Add rgmii to port@5 of Broadcom switch on + Asus RT-AC88U +MIME-Version: 1.0 +Content-Type: text/plain; charset=UTF-8 +Content-Transfer-Encoding: 8bit + +Define phy-mode of the Broadcom switch's port@5 as rgmii. This doesn't seem +to matter but let's explicitly define it since phy-mode as rgmii is defined +on the other side which is port@6 of the Realtek switch. + +Signed-off-by: Arınç ÜNAL +Signed-off-by: Florian Fainelli +--- + arch/arm/boot/dts/bcm47094-asus-rt-ac88u.dts | 1 + + 1 file changed, 1 insertion(+) + +--- a/arch/arm/boot/dts/bcm47094-asus-rt-ac88u.dts ++++ b/arch/arm/boot/dts/bcm47094-asus-rt-ac88u.dts +@@ -205,6 +205,7 @@ + sw0_p5: port@5 { + reg = <5>; + label = "extsw"; ++ phy-mode = "rgmii"; + + fixed-link { + speed = <1000>; diff --git a/target/linux/bcm53xx/patches-5.10/036-v5.19-0005-ARM-dts-BCM5301X-Retrieve-gmac1-MAC-address-from-NVR.patch b/target/linux/bcm53xx/patches-5.10/036-v5.19-0005-ARM-dts-BCM5301X-Retrieve-gmac1-MAC-address-from-NVR.patch new file mode 100644 index 0000000000..4c0858be0a --- /dev/null +++ b/target/linux/bcm53xx/patches-5.10/036-v5.19-0005-ARM-dts-BCM5301X-Retrieve-gmac1-MAC-address-from-NVR.patch @@ -0,0 +1,43 @@ +From 7f7f8c7b9f3cbae1355fb3b0ce4ea9d6f1552521 Mon Sep 17 00:00:00 2001 +From: =?UTF-8?q?Ar=C4=B1n=C3=A7=20=C3=9CNAL?= +Date: Fri, 1 Apr 2022 13:20:01 +0300 +Subject: [PATCH] ARM: dts: BCM5301X: Retrieve gmac1 MAC address from NVRAM on + Asus RT-AC88U +MIME-Version: 1.0 +Content-Type: text/plain; charset=UTF-8 +Content-Transfer-Encoding: 8bit + +The et1macaddr NVRAM variable contains a MAC address for gmac1 on Asus +RT-AC88U. Add NVMEM cell for it and reference it in the gmac1 node. + +Signed-off-by: Arınç ÜNAL +Acked-by: Rafał Miłecki +Signed-off-by: Florian Fainelli +--- + arch/arm/boot/dts/bcm47094-asus-rt-ac88u.dts | 8 ++++++++ + 1 file changed, 8 insertions(+) + +--- a/arch/arm/boot/dts/bcm47094-asus-rt-ac88u.dts ++++ b/arch/arm/boot/dts/bcm47094-asus-rt-ac88u.dts +@@ -25,6 +25,9 @@ + nvram@1c080000 { + compatible = "brcm,nvram"; + reg = <0x1c080000 0x00180000>; ++ ++ et1macaddr: et1macaddr { ++ }; + }; + + leds { +@@ -239,6 +242,11 @@ + }; + }; + ++&gmac1 { ++ nvmem-cells = <&et1macaddr>; ++ nvmem-cell-names = "mac-address"; ++}; ++ + &usb2 { + vcc-gpio = <&chipcommon 9 GPIO_ACTIVE_HIGH>; + }; diff --git a/target/linux/bcm53xx/patches-5.10/036-v5.19-0006-ARM-dts-BCM5301X-Fix-compatible-strings-for-BCM53012.patch b/target/linux/bcm53xx/patches-5.10/036-v5.19-0006-ARM-dts-BCM5301X-Fix-compatible-strings-for-BCM53012.patch new file mode 100644 index 0000000000..59e99dae62 --- /dev/null +++ b/target/linux/bcm53xx/patches-5.10/036-v5.19-0006-ARM-dts-BCM5301X-Fix-compatible-strings-for-BCM53012.patch @@ -0,0 +1,65 @@ +From 69bb5c6f3f41fe6baa86a775c8a3e69dd27f85d6 Mon Sep 17 00:00:00 2001 +From: =?UTF-8?q?Ar=C4=B1n=C3=A7=20=C3=9CNAL?= +Date: Sat, 2 Apr 2022 23:46:21 +0300 +Subject: [PATCH] ARM: dts: BCM5301X: Fix compatible strings for BCM53012 and + BCM53016 SoC +MIME-Version: 1.0 +Content-Type: text/plain; charset=UTF-8 +Content-Transfer-Encoding: 8bit + +Fix compatible strings for devicetrees using the BCM53012 and BCM53016 SoC. + +Signed-off-by: Arınç ÜNAL +Acked-by: Krzysztof Kozlowski +Signed-off-by: Florian Fainelli +--- + arch/arm/boot/dts/bcm53016-meraki-mr32.dts | 2 +- + arch/arm/boot/dts/bcm953012er.dts | 2 +- + arch/arm/boot/dts/bcm953012hr.dts | 2 +- + arch/arm/boot/dts/bcm953012k.dts | 2 +- + 4 files changed, 4 insertions(+), 4 deletions(-) + +--- a/arch/arm/boot/dts/bcm53016-meraki-mr32.dts ++++ b/arch/arm/boot/dts/bcm53016-meraki-mr32.dts +@@ -13,7 +13,7 @@ + #include + + / { +- compatible = "meraki,mr32", "brcm,brcm53016", "brcm,bcm4708"; ++ compatible = "meraki,mr32", "brcm,bcm53016", "brcm,bcm4708"; + model = "Meraki MR32"; + + chosen { +--- a/arch/arm/boot/dts/bcm953012er.dts ++++ b/arch/arm/boot/dts/bcm953012er.dts +@@ -37,7 +37,7 @@ + + / { + model = "NorthStar Enterprise Router (BCM953012ER)"; +- compatible = "brcm,bcm953012er", "brcm,brcm53012", "brcm,bcm4708"; ++ compatible = "brcm,bcm953012er", "brcm,bcm53012", "brcm,bcm4708"; + + memory@0 { + device_type = "memory"; +--- a/arch/arm/boot/dts/bcm953012hr.dts ++++ b/arch/arm/boot/dts/bcm953012hr.dts +@@ -37,7 +37,7 @@ + + / { + model = "NorthStar HR (BCM953012HR)"; +- compatible = "brcm,bcm953012hr", "brcm,brcm53012", "brcm,bcm4708"; ++ compatible = "brcm,bcm953012hr", "brcm,bcm53012", "brcm,bcm4708"; + + aliases { + ethernet0 = &gmac0; +--- a/arch/arm/boot/dts/bcm953012k.dts ++++ b/arch/arm/boot/dts/bcm953012k.dts +@@ -36,7 +36,7 @@ + + / { + model = "NorthStar SVK (BCM953012K)"; +- compatible = "brcm,bcm953012k", "brcm,brcm53012", "brcm,bcm4708"; ++ compatible = "brcm,bcm953012k", "brcm,bcm53012", "brcm,bcm4708"; + + aliases { + serial0 = &uart0; diff --git a/target/linux/bcm53xx/patches-5.10/036-v5.19-0007-ARM-dts-BCM5301X-Disable-gmac0-and-enable-port-8-on-.patch b/target/linux/bcm53xx/patches-5.10/036-v5.19-0007-ARM-dts-BCM5301X-Disable-gmac0-and-enable-port-8-on-.patch new file mode 100644 index 0000000000..f75a53777f --- /dev/null +++ b/target/linux/bcm53xx/patches-5.10/036-v5.19-0007-ARM-dts-BCM5301X-Disable-gmac0-and-enable-port-8-on-.patch @@ -0,0 +1,39 @@ +From b9cff8783439ff1803709128af3a0e04c5f5f047 Mon Sep 17 00:00:00 2001 +From: =?UTF-8?q?Ar=C4=B1n=C3=A7=20=C3=9CNAL?= +Date: Sun, 10 Apr 2022 12:44:55 +0300 +Subject: [PATCH] ARM: dts: BCM5301X: Disable gmac0 and enable port@8 on Asus + RT-AC88U +MIME-Version: 1.0 +Content-Type: text/plain; charset=UTF-8 +Content-Transfer-Encoding: 8bit + +Disable gmac0 which is not connected to any switch MAC. Enable port@8 of +the Broadcom switch which is connected to gmac2. + +Signed-off-by: Arınç ÜNAL +Signed-off-by: Florian Fainelli +--- + arch/arm/boot/dts/bcm47094-asus-rt-ac88u.dts | 5 ++++- + 1 file changed, 4 insertions(+), 1 deletion(-) + +--- a/arch/arm/boot/dts/bcm47094-asus-rt-ac88u.dts ++++ b/arch/arm/boot/dts/bcm47094-asus-rt-ac88u.dts +@@ -232,7 +232,6 @@ + reg = <8>; + ethernet = <&gmac2>; + label = "cpu"; +- status = "disabled"; + + fixed-link { + speed = <1000>; +@@ -242,6 +241,10 @@ + }; + }; + ++&gmac0 { ++ status = "disabled"; ++}; ++ + &gmac1 { + nvmem-cells = <&et1macaddr>; + nvmem-cell-names = "mac-address"; diff --git a/target/linux/bcm53xx/patches-5.10/036-v5.19-0008-ARM-dts-BCM5301X-Add-DT-for-WZR-1166DHP-DHP2.patch b/target/linux/bcm53xx/patches-5.10/036-v5.19-0008-ARM-dts-BCM5301X-Add-DT-for-WZR-1166DHP-DHP2.patch new file mode 100644 index 0000000000..bce497bba7 --- /dev/null +++ b/target/linux/bcm53xx/patches-5.10/036-v5.19-0008-ARM-dts-BCM5301X-Add-DT-for-WZR-1166DHP-DHP2.patch @@ -0,0 +1,300 @@ +From 417aea4436bb658d8c5c4dcd0e3c255931d0ee96 Mon Sep 17 00:00:00 2001 +From: SHIMAMOTO Takayoshi +Date: Fri, 22 Apr 2022 00:10:54 +0900 +Subject: [PATCH] ARM: dts: BCM5301X: Add DT for WZR-1166DHP,DHP2 + +Buffalo WZR-1166DHP/WZR-1166DHP2 wireless router with + + - BCM4708A0 + - 128MiB NAND flash + - 2T2R 11ac/a/b/g/n Wi-Fi + - 4x 10/100/1000M ethernet switch + - 1x USB 3.0 port + + WZR-1166DHP and WZR-1166DHP2 have different memory capacity. + + WZR-1166DHP + - 512 MiB DDR2 SDRAM + + WZR-1166DHP2 + - 256 MiB DDR2 SDRAM + + These hardware components are very similar to the WZR-1750DHP + except for the number of antennas. + +Signed-off-by: SHIMAMOTO Takayoshi +Signed-off-by: Florian Fainelli +--- + arch/arm/boot/dts/Makefile | 2 + + .../bcm4708-buffalo-wzr-1166dhp-common.dtsi | 192 ++++++++++++++++++ + .../boot/dts/bcm4708-buffalo-wzr-1166dhp.dts | 26 +++ + .../boot/dts/bcm4708-buffalo-wzr-1166dhp2.dts | 26 +++ + 4 files changed, 246 insertions(+) + create mode 100644 arch/arm/boot/dts/bcm4708-buffalo-wzr-1166dhp-common.dtsi + create mode 100644 arch/arm/boot/dts/bcm4708-buffalo-wzr-1166dhp.dts + create mode 100644 arch/arm/boot/dts/bcm4708-buffalo-wzr-1166dhp2.dts + +--- a/arch/arm/boot/dts/Makefile ++++ b/arch/arm/boot/dts/Makefile +@@ -99,6 +99,8 @@ dtb-$(CONFIG_ARCH_BCM_5301X) += \ + bcm4708-asus-rt-ac56u.dtb \ + bcm4708-asus-rt-ac68u.dtb \ + bcm4708-buffalo-wzr-1750dhp.dtb \ ++ bcm4708-buffalo-wzr-1166dhp.dtb \ ++ bcm4708-buffalo-wzr-1166dhp2.dtb \ + bcm4708-linksys-ea6300-v1.dtb \ + bcm4708-linksys-ea6500-v2.dtb \ + bcm4708-luxul-xap-1510.dtb \ +--- /dev/null ++++ b/arch/arm/boot/dts/bcm4708-buffalo-wzr-1166dhp-common.dtsi +@@ -0,0 +1,192 @@ ++// SPDX-License-Identifier: GPL-2.0-or-later OR MIT ++/* ++ * Broadcom BCM470X / BCM5301X ARM platform code. ++ * DTS for Buffalo WZR-1166DHP and WZR-1166DHP2 ++ * ++ * Copyright (C) 2014 Rafał Miłecki ++ * Copyright (C) 2022 SHIMAMOTO Takayoshi ++ */ ++ ++ ++#include "bcm4708.dtsi" ++#include "bcm5301x-nand-cs0-bch8.dtsi" ++#include ++ ++/ { ++ spi { ++ compatible = "spi-gpio"; ++ num-chipselects = <1>; ++ gpio-sck = <&chipcommon 7 0>; ++ gpio-mosi = <&chipcommon 4 0>; ++ cs-gpios = <&chipcommon 6 0>; ++ #address-cells = <1>; ++ #size-cells = <0>; ++ ++ hc595: gpio_spi@0 { ++ compatible = "fairchild,74hc595"; ++ reg = <0>; ++ registers-number = <1>; ++ spi-max-frequency = <100000>; ++ ++ gpio-controller; ++ #gpio-cells = <2>; ++ ++ }; ++ }; ++ ++ leds { ++ compatible = "gpio-leds"; ++ ++ usb { ++ /* label = "bcm53xx:blue:usb"; */ ++ function = LED_FUNCTION_USB; ++ color = ; ++ gpios = <&hc595 0 GPIO_ACTIVE_HIGH>; ++ trigger-sources = <&ohci_port1>, <&ehci_port1>, ++ <&xhci_port1>, <&ohci_port2>, ++ <&ehci_port2>; ++ linux,default-trigger = "usbport"; ++ }; ++ ++ power0 { ++ /* label = "bcm53xx:red:power"; */ ++ function = LED_FUNCTION_FAULT; ++ color = ; ++ gpios = <&hc595 1 GPIO_ACTIVE_HIGH>; ++ }; ++ ++ power1 { ++ /* label = "bcm53xx:white:power"; */ ++ function = LED_FUNCTION_POWER; ++ color = ; ++ gpios = <&hc595 2 GPIO_ACTIVE_HIGH>; ++ linux,default-trigger = "default-on"; ++ }; ++ ++ router0 { ++ /* label = "bcm53xx:blue:router"; */ ++ function = LED_FUNCTION_STATUS; ++ color = ; ++ gpios = <&hc595 3 GPIO_ACTIVE_HIGH>; ++ linux,default-trigger = "default-on"; ++ }; ++ ++ router1 { ++ /* label = "bcm53xx:amber:router"; */ ++ function = LED_FUNCTION_STATUS; ++ color = ; ++ gpios = <&hc595 4 GPIO_ACTIVE_HIGH>; ++ }; ++ ++ wan { ++ /* label = "bcm53xx:blue:wan"; */ ++ function = LED_FUNCTION_WAN; ++ color = ; ++ gpios = <&hc595 5 GPIO_ACTIVE_HIGH>; ++ linux,default-trigger = "default-on"; ++ }; ++ ++ wireless0 { ++ /* label = "bcm53xx:blue:wireless"; */ ++ function = LED_FUNCTION_WLAN; ++ color = ; ++ gpios = <&hc595 6 GPIO_ACTIVE_HIGH>; ++ }; ++ ++ wireless1 { ++ /* label = "bcm53xx:amber:wireless"; */ ++ function = LED_FUNCTION_WLAN; ++ color = ; ++ gpios = <&hc595 7 GPIO_ACTIVE_HIGH>; ++ }; ++ }; ++ ++ gpio-keys { ++ compatible = "gpio-keys"; ++ ++ restart { ++ label = "Reset"; ++ linux,code = ; ++ gpios = <&chipcommon 11 GPIO_ACTIVE_LOW>; ++ }; ++ ++ aoss { ++ label = "AOSS"; ++ linux,code = ; ++ gpios = <&chipcommon 12 GPIO_ACTIVE_LOW>; ++ }; ++ ++ /* Commit mode set by switch? */ ++ mode { ++ label = "Mode"; ++ linux,code = ; ++ gpios = <&chipcommon 13 GPIO_ACTIVE_LOW>; ++ }; ++ ++ /* Switch: AP mode */ ++ sw_ap { ++ label = "AP"; ++ linux,code = ; ++ gpios = <&chipcommon 14 GPIO_ACTIVE_LOW>; ++ }; ++ ++ eject { ++ label = "USB eject"; ++ linux,code = ; ++ gpios = <&chipcommon 15 GPIO_ACTIVE_LOW>; ++ }; ++ }; ++}; ++ ++&usb2 { ++ vcc-gpio = <&chipcommon 9 GPIO_ACTIVE_HIGH>; ++}; ++ ++&usb3 { ++ vcc-gpio = <&chipcommon 10 GPIO_ACTIVE_LOW>; ++}; ++ ++&spi_nor { ++ status = "okay"; ++}; ++ ++&usb3_phy { ++ status = "okay"; ++}; ++ ++&srab { ++ status = "okay"; ++ ++ ports { ++ port@0 { ++ reg = <0>; ++ label = "lan1"; ++ }; ++ ++ port@1 { ++ reg = <1>; ++ label = "lan2"; ++ }; ++ ++ port@2 { ++ reg = <2>; ++ label = "lan3"; ++ }; ++ ++ port@3 { ++ reg = <3>; ++ label = "lan4"; ++ }; ++ ++ port@4 { ++ reg = <4>; ++ label = "wan"; ++ }; ++ ++ port@5 { ++ reg = <5>; ++ label = "cpu"; ++ ethernet = <&gmac0>; ++ }; ++ }; ++}; +--- /dev/null ++++ b/arch/arm/boot/dts/bcm4708-buffalo-wzr-1166dhp.dts +@@ -0,0 +1,26 @@ ++// SPDX-License-Identifier: GPL-2.0-or-later OR MIT ++/* ++ * Device Tree Bindigs for Buffalo WZR-1166DHP ++ * ++ * Copyright (C) 2022 SHIMAMOTO Takayoshi ++ */ ++ ++/dts-v1/; ++ ++#include "bcm4708-buffalo-wzr-1166dhp-common.dtsi" ++ ++/ { ++ compatible = "buffalo,wzr-1166dhp", "brcm,bcm4708"; ++ model = "Buffalo WZR-1166DHP"; ++ ++ chosen { ++ bootargs = "console=ttyS0,115200"; ++ }; ++ ++ memory@0 { ++ device_type = "memory"; ++ reg = <0x00000000 0x08000000>, ++ <0x88000000 0x18000000>; ++ }; ++ ++}; +--- /dev/null ++++ b/arch/arm/boot/dts/bcm4708-buffalo-wzr-1166dhp2.dts +@@ -0,0 +1,26 @@ ++// SPDX-License-Identifier: GPL-2.0-or-later OR MIT ++/* ++ * Device Tree Bindigs for Buffalo WZR-1166DHP2 ++ * ++ * Copyright (C) 2022 SHIMAMOTO Takayoshi ++ */ ++ ++/dts-v1/; ++ ++#include "bcm4708-buffalo-wzr-1166dhp-common.dtsi" ++ ++/ { ++ compatible = "buffalo,wzr-1166dhp2", "brcm,bcm4708"; ++ model = "Buffalo WZR-1166DHP2"; ++ ++ chosen { ++ bootargs = "console=ttyS0,115200"; ++ }; ++ ++ memory@0 { ++ device_type = "memory"; ++ reg = <0x00000000 0x08000000>, ++ <0x88000000 0x08000000>; ++ }; ++ ++}; diff --git a/target/linux/bcm53xx/patches-5.10/036-v5.19-0009-Revert-ARM-dts-BCM5301X-Fix-DTC-warning-for-NAND-nod.patch b/target/linux/bcm53xx/patches-5.10/036-v5.19-0009-Revert-ARM-dts-BCM5301X-Fix-DTC-warning-for-NAND-nod.patch new file mode 100644 index 0000000000..cc7e9741a7 --- /dev/null +++ b/target/linux/bcm53xx/patches-5.10/036-v5.19-0009-Revert-ARM-dts-BCM5301X-Fix-DTC-warning-for-NAND-nod.patch @@ -0,0 +1,32 @@ +From 18176b9d82eebaf4408dc0440f54d57a8cbced83 Mon Sep 17 00:00:00 2001 +From: Arnd Bergmann +Date: Fri, 13 May 2022 11:11:07 +0200 +Subject: [PATCH] Revert "ARM: dts: BCM5301X: Fix DTC warning for NAND node" + +This reverts commit 90103611d573, which caused a new DTC warning + +arch/arm/boot/dts/bcm953012hr.dts:57.3-33: Warning (reg_format): /nand-controller@18028000/nand@0/partition@0:reg: property has invalid length (8 bytes) (#address-cells == 2, #size-cells == 1) +arch/arm/boot/dts/bcm953012hr.dts:62.3-33: Warning (reg_format): /nand-controller@18028000/nand@0/partition@200000:reg: property has invalid length (8 bytes) (#address-cells == 2, #size-cells == 1) +arch/arm/boot/dts/bcm953012hr.dts:66.3-33: Warning (reg_format): /nand-controller@18028000/nand@0/partition@600000:reg: property has invalid length (8 bytes) (#address-cells == 2, #size-cells == 1) +arch/arm/boot/dts/bcm953012hr.dts:70.3-33: Warning (reg_format): /nand-controller@18028000/nand@0/partition@1000000:reg: property has invalid length (8 bytes) (#address-cells == 2, #size-cells == 1) +arch/arm/boot/dts/bcm953012hr.dtb: Warning (pci_device_reg): Failed prerequisite 'reg_format' +arch/arm/boot/dts/bcm953012hr.dtb: Warning (pci_device_bus_num): Failed prerequisite 'reg_format' +arch/arm/boot/dts/bcm953012hr.dtb: Warning (i2c_bus_reg): Failed prerequisite 'reg_format' +arch/arm/boot/dts/bcm953012hr.dtb: Warning (spi_bus_reg): Failed prerequisite 'reg_format' + +Signed-off-by: Arnd Bergmann +--- + arch/arm/boot/dts/bcm5301x-nand-cs0.dtsi | 2 ++ + 1 file changed, 2 insertions(+) + +--- a/arch/arm/boot/dts/bcm5301x-nand-cs0.dtsi ++++ b/arch/arm/boot/dts/bcm5301x-nand-cs0.dtsi +@@ -10,6 +10,8 @@ + nandcs: nand@0 { + compatible = "brcm,nandcs"; + reg = <0>; ++ #address-cells = <1>; ++ #size-cells = <1>; + + partitions { + compatible = "brcm,bcm947xx-cfe-partitions"; diff --git a/target/linux/bcm53xx/patches-5.10/037-v6.0-0001-ARM-dts-broadcom-align-gpio-key-node-names-with-dtsc.patch b/target/linux/bcm53xx/patches-5.10/037-v6.0-0001-ARM-dts-broadcom-align-gpio-key-node-names-with-dtsc.patch new file mode 100644 index 0000000000..33d675297e --- /dev/null +++ b/target/linux/bcm53xx/patches-5.10/037-v6.0-0001-ARM-dts-broadcom-align-gpio-key-node-names-with-dtsc.patch @@ -0,0 +1,912 @@ +From c5aec5611aec8fb1ca68f68e41acaefccfc93c16 Mon Sep 17 00:00:00 2001 +From: Krzysztof Kozlowski +Date: Thu, 9 Jun 2022 13:39:30 +0200 +Subject: [PATCH] ARM: dts: broadcom: align gpio-key node names with dtschema + +The node names should be generic and DT schema expects certain pattern +(e.g. with key/button/switch). + +Signed-off-by: Krzysztof Kozlowski +Signed-off-by: Florian Fainelli +--- + arch/arm/boot/dts/bcm4708-asus-rt-ac56u.dts | 6 +++--- + arch/arm/boot/dts/bcm4708-asus-rt-ac68u.dts | 8 ++++---- + .../boot/dts/bcm4708-buffalo-wzr-1166dhp-common.dtsi | 10 +++++----- + arch/arm/boot/dts/bcm4708-buffalo-wzr-1750dhp.dts | 10 +++++----- + arch/arm/boot/dts/bcm4708-linksys-ea6300-v1.dts | 4 ++-- + arch/arm/boot/dts/bcm4708-linksys-ea6500-v2.dts | 4 ++-- + arch/arm/boot/dts/bcm4708-luxul-xap-1510.dts | 2 +- + arch/arm/boot/dts/bcm4708-luxul-xwc-1000.dts | 2 +- + arch/arm/boot/dts/bcm4708-netgear-r6250.dts | 6 +++--- + arch/arm/boot/dts/bcm4708-netgear-r6300-v2.dts | 6 +++--- + arch/arm/boot/dts/bcm4708-smartrg-sr400ac.dts | 6 +++--- + arch/arm/boot/dts/bcm47081-asus-rt-n18u.dts | 4 ++-- + arch/arm/boot/dts/bcm47081-buffalo-wzr-600dhp2.dts | 8 ++++---- + arch/arm/boot/dts/bcm47081-buffalo-wzr-900dhp.dts | 2 +- + arch/arm/boot/dts/bcm47081-luxul-xap-1410.dts | 2 +- + arch/arm/boot/dts/bcm47081-luxul-xwr-1200.dts | 2 +- + arch/arm/boot/dts/bcm47081-tplink-archer-c5-v2.dts | 4 ++-- + arch/arm/boot/dts/bcm4709-asus-rt-ac87u.dts | 4 ++-- + arch/arm/boot/dts/bcm4709-buffalo-wxr-1900dhp.dts | 12 ++++++------ + arch/arm/boot/dts/bcm4709-linksys-ea9200.dts | 4 ++-- + arch/arm/boot/dts/bcm4709-netgear-r7000.dts | 6 +++--- + arch/arm/boot/dts/bcm4709-netgear-r8000.dts | 8 ++++---- + arch/arm/boot/dts/bcm4709-tplink-archer-c9-v1.dts | 4 ++-- + arch/arm/boot/dts/bcm47094-asus-rt-ac88u.dts | 8 ++++---- + arch/arm/boot/dts/bcm47094-dlink-dir-885l.dts | 6 +++--- + arch/arm/boot/dts/bcm47094-linksys-panamera.dts | 6 +++--- + arch/arm/boot/dts/bcm47094-luxul-abr-4500.dts | 2 +- + arch/arm/boot/dts/bcm47094-luxul-xap-1610.dts | 2 +- + arch/arm/boot/dts/bcm47094-luxul-xbr-4500.dts | 2 +- + arch/arm/boot/dts/bcm47094-luxul-xwc-2000.dts | 2 +- + arch/arm/boot/dts/bcm47094-luxul-xwr-3100.dts | 2 +- + arch/arm/boot/dts/bcm47094-luxul-xwr-3150-v1.dts | 2 +- + arch/arm/boot/dts/bcm47094-netgear-r8500.dts | 8 ++++---- + arch/arm/boot/dts/bcm47094-phicomm-k3.dts | 2 +- + arch/arm/boot/dts/bcm47189-luxul-xap-1440.dts | 2 +- + arch/arm/boot/dts/bcm47189-luxul-xap-810.dts | 2 +- + arch/arm/boot/dts/bcm47189-tenda-ac9.dts | 6 +++--- + arch/arm/boot/dts/bcm53016-meraki-mr32.dts | 2 +- + arch/arm/boot/dts/bcm911360_entphn.dts | 4 ++-- + arch/arm/boot/dts/bcm947189acdbmr.dts | 4 ++-- + arch/arm/boot/dts/bcm953012er.dts | 4 ++-- + arch/arm/boot/dts/bcm958625-meraki-alamo.dtsi | 2 +- + arch/arm/boot/dts/bcm958625-meraki-kingpin.dtsi | 2 +- + 43 files changed, 97 insertions(+), 97 deletions(-) + +--- a/arch/arm/boot/dts/bcm4708-asus-rt-ac56u.dts ++++ b/arch/arm/boot/dts/bcm4708-asus-rt-ac56u.dts +@@ -70,19 +70,19 @@ + gpio-keys { + compatible = "gpio-keys"; + +- rfkill { ++ button-rfkill { + label = "WiFi"; + linux,code = ; + gpios = <&chipcommon 7 GPIO_ACTIVE_LOW>; + }; + +- restart { ++ button-restart { + label = "Reset"; + linux,code = ; + gpios = <&chipcommon 11 GPIO_ACTIVE_LOW>; + }; + +- wps { ++ button-wps { + label = "WPS"; + linux,code = ; + gpios = <&chipcommon 15 GPIO_ACTIVE_LOW>; +--- a/arch/arm/boot/dts/bcm4708-asus-rt-ac68u.dts ++++ b/arch/arm/boot/dts/bcm4708-asus-rt-ac68u.dts +@@ -54,25 +54,25 @@ + gpio-keys { + compatible = "gpio-keys"; + +- brightness { ++ button-brightness { + label = "Backlight"; + linux,code = ; + gpios = <&chipcommon 5 GPIO_ACTIVE_LOW>; + }; + +- wps { ++ button-wps { + label = "WPS"; + linux,code = ; + gpios = <&chipcommon 7 GPIO_ACTIVE_LOW>; + }; + +- restart { ++ button-restart { + label = "Reset"; + linux,code = ; + gpios = <&chipcommon 11 GPIO_ACTIVE_LOW>; + }; + +- rfkill { ++ button-rfkill { + label = "WiFi"; + linux,code = ; + gpios = <&chipcommon 15 GPIO_ACTIVE_LOW>; +--- a/arch/arm/boot/dts/bcm4708-buffalo-wzr-1166dhp-common.dtsi ++++ b/arch/arm/boot/dts/bcm4708-buffalo-wzr-1166dhp-common.dtsi +@@ -104,33 +104,33 @@ + gpio-keys { + compatible = "gpio-keys"; + +- restart { ++ button-restart { + label = "Reset"; + linux,code = ; + gpios = <&chipcommon 11 GPIO_ACTIVE_LOW>; + }; + +- aoss { ++ button-aoss { + label = "AOSS"; + linux,code = ; + gpios = <&chipcommon 12 GPIO_ACTIVE_LOW>; + }; + + /* Commit mode set by switch? */ +- mode { ++ button-mode { + label = "Mode"; + linux,code = ; + gpios = <&chipcommon 13 GPIO_ACTIVE_LOW>; + }; + + /* Switch: AP mode */ +- sw_ap { ++ button-sw-ap { + label = "AP"; + linux,code = ; + gpios = <&chipcommon 14 GPIO_ACTIVE_LOW>; + }; + +- eject { ++ button-eject { + label = "USB eject"; + linux,code = ; + gpios = <&chipcommon 15 GPIO_ACTIVE_LOW>; +--- a/arch/arm/boot/dts/bcm4708-buffalo-wzr-1750dhp.dts ++++ b/arch/arm/boot/dts/bcm4708-buffalo-wzr-1750dhp.dts +@@ -100,33 +100,33 @@ + gpio-keys { + compatible = "gpio-keys"; + +- restart { ++ button-restart { + label = "Reset"; + linux,code = ; + gpios = <&chipcommon 11 GPIO_ACTIVE_LOW>; + }; + +- aoss { ++ button-aoss { + label = "AOSS"; + linux,code = ; + gpios = <&chipcommon 12 GPIO_ACTIVE_LOW>; + }; + + /* Commit mode set by switch? */ +- mode { ++ button-mode { + label = "Mode"; + linux,code = ; + gpios = <&chipcommon 13 GPIO_ACTIVE_LOW>; + }; + + /* Switch: AP mode */ +- sw_ap { ++ button-sw-ap { + label = "AP"; + linux,code = ; + gpios = <&chipcommon 14 GPIO_ACTIVE_LOW>; + }; + +- eject { ++ button-eject { + label = "USB eject"; + linux,code = ; + gpios = <&chipcommon 15 GPIO_ACTIVE_LOW>; +--- a/arch/arm/boot/dts/bcm4708-linksys-ea6300-v1.dts ++++ b/arch/arm/boot/dts/bcm4708-linksys-ea6300-v1.dts +@@ -29,13 +29,13 @@ + gpio-keys { + compatible = "gpio-keys"; + +- wps { ++ button-wps { + label = "WPS"; + linux,code = ; + gpios = <&chipcommon 7 GPIO_ACTIVE_LOW>; + }; + +- restart { ++ button-restart { + label = "Reset"; + linux,code = ; + gpios = <&chipcommon 11 GPIO_ACTIVE_LOW>; +--- a/arch/arm/boot/dts/bcm4708-linksys-ea6500-v2.dts ++++ b/arch/arm/boot/dts/bcm4708-linksys-ea6500-v2.dts +@@ -25,13 +25,13 @@ + gpio-keys { + compatible = "gpio-keys"; + +- wps { ++ button-wps { + label = "WPS"; + linux,code = ; + gpios = <&chipcommon 7 GPIO_ACTIVE_LOW>; + }; + +- restart { ++ button-restart { + label = "Reset"; + linux,code = ; + gpios = <&chipcommon 11 GPIO_ACTIVE_LOW>; +--- a/arch/arm/boot/dts/bcm4708-luxul-xap-1510.dts ++++ b/arch/arm/boot/dts/bcm4708-luxul-xap-1510.dts +@@ -45,7 +45,7 @@ + gpio-keys { + compatible = "gpio-keys"; + +- restart { ++ button-restart { + label = "Reset"; + linux,code = ; + gpios = <&chipcommon 11 GPIO_ACTIVE_LOW>; +--- a/arch/arm/boot/dts/bcm4708-luxul-xwc-1000.dts ++++ b/arch/arm/boot/dts/bcm4708-luxul-xwc-1000.dts +@@ -52,7 +52,7 @@ + gpio-keys { + compatible = "gpio-keys"; + +- restart { ++ button-restart { + label = "Reset"; + linux,code = ; + gpios = <&chipcommon 7 GPIO_ACTIVE_LOW>; +--- a/arch/arm/boot/dts/bcm4708-netgear-r6250.dts ++++ b/arch/arm/boot/dts/bcm4708-netgear-r6250.dts +@@ -63,19 +63,19 @@ + gpio-keys { + compatible = "gpio-keys"; + +- wps { ++ button-wps { + label = "WPS"; + linux,code = ; + gpios = <&chipcommon 4 GPIO_ACTIVE_LOW>; + }; + +- rfkill { ++ button-rfkill { + label = "WiFi"; + linux,code = ; + gpios = <&chipcommon 5 GPIO_ACTIVE_LOW>; + }; + +- restart { ++ button-restart { + label = "Reset"; + linux,code = ; + gpios = <&chipcommon 6 GPIO_ACTIVE_LOW>; +--- a/arch/arm/boot/dts/bcm4708-netgear-r6300-v2.dts ++++ b/arch/arm/boot/dts/bcm4708-netgear-r6300-v2.dts +@@ -59,19 +59,19 @@ + gpio-keys { + compatible = "gpio-keys"; + +- wps { ++ button-wps { + label = "WPS"; + linux,code = ; + gpios = <&chipcommon 4 GPIO_ACTIVE_LOW>; + }; + +- rfkill { ++ button-rfkill { + label = "WiFi"; + linux,code = ; + gpios = <&chipcommon 5 GPIO_ACTIVE_LOW>; + }; + +- restart { ++ button-restart { + label = "Reset"; + linux,code = ; + gpios = <&chipcommon 6 GPIO_ACTIVE_LOW>; +--- a/arch/arm/boot/dts/bcm4708-smartrg-sr400ac.dts ++++ b/arch/arm/boot/dts/bcm4708-smartrg-sr400ac.dts +@@ -94,19 +94,19 @@ + gpio-keys { + compatible = "gpio-keys"; + +- rfkill { ++ button-rfkill { + label = "WiFi"; + linux,code = ; + gpios = <&chipcommon 0 GPIO_ACTIVE_LOW>; + }; + +- wps { ++ button-wps { + label = "WPS"; + linux,code = ; + gpios = <&chipcommon 7 GPIO_ACTIVE_LOW>; + }; + +- restart { ++ button-restart { + label = "Reset"; + linux,code = ; + gpios = <&chipcommon 11 GPIO_ACTIVE_LOW>; +--- a/arch/arm/boot/dts/bcm47081-asus-rt-n18u.dts ++++ b/arch/arm/boot/dts/bcm47081-asus-rt-n18u.dts +@@ -60,13 +60,13 @@ + gpio-keys { + compatible = "gpio-keys"; + +- restart { ++ button-restart { + label = "Reset"; + linux,code = ; + gpios = <&chipcommon 7 GPIO_ACTIVE_LOW>; + }; + +- wps { ++ button-wps { + label = "WPS"; + linux,code = ; + gpios = <&chipcommon 11 GPIO_ACTIVE_LOW>; +--- a/arch/arm/boot/dts/bcm47081-buffalo-wzr-600dhp2.dts ++++ b/arch/arm/boot/dts/bcm47081-buffalo-wzr-600dhp2.dts +@@ -91,26 +91,26 @@ + gpio-keys { + compatible = "gpio-keys"; + +- aoss { ++ button-aoss { + label = "AOSS"; + linux,code = ; + gpios = <&chipcommon 9 GPIO_ACTIVE_LOW>; + }; + +- restart { ++ button-restart { + label = "Reset"; + linux,code = ; + gpios = <&chipcommon 11 GPIO_ACTIVE_LOW>; + }; + + /* Switch device mode? */ +- mode { ++ button-mode { + label = "Mode"; + linux,code = ; + gpios = <&chipcommon 14 GPIO_ACTIVE_LOW>; + }; + +- eject { ++ button-eject { + label = "USB eject"; + linux,code = ; + gpios = <&chipcommon 15 GPIO_ACTIVE_LOW>; +--- a/arch/arm/boot/dts/bcm47081-buffalo-wzr-900dhp.dts ++++ b/arch/arm/boot/dts/bcm47081-buffalo-wzr-900dhp.dts +@@ -96,7 +96,7 @@ + gpio-keys { + compatible = "gpio-keys"; + +- restart { ++ button-restart { + label = "Reset"; + linux,code = ; + gpios = <&chipcommon 11 GPIO_ACTIVE_LOW>; +--- a/arch/arm/boot/dts/bcm47081-luxul-xap-1410.dts ++++ b/arch/arm/boot/dts/bcm47081-luxul-xap-1410.dts +@@ -45,7 +45,7 @@ + gpio-keys { + compatible = "gpio-keys"; + +- restart { ++ button-restart { + label = "Reset"; + linux,code = ; + gpios = <&chipcommon 11 GPIO_ACTIVE_LOW>; +--- a/arch/arm/boot/dts/bcm47081-luxul-xwr-1200.dts ++++ b/arch/arm/boot/dts/bcm47081-luxul-xwr-1200.dts +@@ -94,7 +94,7 @@ + gpio-keys { + compatible = "gpio-keys"; + +- restart { ++ button-restart { + label = "Reset"; + linux,code = ; + gpios = <&chipcommon 11 GPIO_ACTIVE_LOW>; +--- a/arch/arm/boot/dts/bcm47081-tplink-archer-c5-v2.dts ++++ b/arch/arm/boot/dts/bcm47081-tplink-archer-c5-v2.dts +@@ -77,13 +77,13 @@ + gpio-keys { + compatible = "gpio-keys"; + +- rfkill { ++ button-rfkill { + label = "WiFi"; + linux,code = ; + gpios = <&chipcommon 3 GPIO_ACTIVE_LOW>; + }; + +- restart { ++ button-restart { + label = "Reset"; + linux,code = ; + gpios = <&chipcommon 7 GPIO_ACTIVE_LOW>; +--- a/arch/arm/boot/dts/bcm4709-asus-rt-ac87u.dts ++++ b/arch/arm/boot/dts/bcm4709-asus-rt-ac87u.dts +@@ -50,13 +50,13 @@ + #address-cells = <1>; + #size-cells = <0>; + +- wps { ++ button-wps { + label = "WPS"; + linux,code = ; + gpios = <&chipcommon 2 GPIO_ACTIVE_LOW>; + }; + +- restart { ++ button-restart { + label = "Reset"; + linux,code = ; + gpios = <&chipcommon 11 GPIO_ACTIVE_LOW>; +--- a/arch/arm/boot/dts/bcm4709-buffalo-wxr-1900dhp.dts ++++ b/arch/arm/boot/dts/bcm4709-buffalo-wxr-1900dhp.dts +@@ -80,39 +80,39 @@ + #address-cells = <1>; + #size-cells = <0>; + +- power { ++ button-power { + label = "Power"; + linux,code = ; + gpios = <&chipcommon 1 GPIO_ACTIVE_LOW>; + }; + +- restart { ++ button-restart { + label = "Reset"; + linux,code = ; + gpios = <&chipcommon 15 GPIO_ACTIVE_LOW>; + }; + +- aoss { ++ button-aoss { + label = "AOSS"; + linux,code = ; + gpios = <&chipcommon 16 GPIO_ACTIVE_LOW>; + }; + + /* Commit mode set by switch? */ +- mode { ++ button-mode { + label = "Mode"; + linux,code = ; + gpios = <&chipcommon 17 GPIO_ACTIVE_LOW>; + }; + + /* Switch: AP mode */ +- sw_ap { ++ button-sw-ap { + label = "AP"; + linux,code = ; + gpios = <&chipcommon 18 GPIO_ACTIVE_LOW>; + }; + +- eject { ++ button-eject { + label = "USB eject"; + linux,code = ; + gpios = <&chipcommon 20 GPIO_ACTIVE_LOW>; +--- a/arch/arm/boot/dts/bcm4709-linksys-ea9200.dts ++++ b/arch/arm/boot/dts/bcm4709-linksys-ea9200.dts +@@ -32,13 +32,13 @@ + #address-cells = <1>; + #size-cells = <0>; + +- wps { ++ button-wps { + label = "WPS"; + linux,code = ; + gpios = <&chipcommon 3 GPIO_ACTIVE_LOW>; + }; + +- restart { ++ button-restart { + label = "Reset"; + linux,code = ; + gpios = <&chipcommon 17 GPIO_ACTIVE_LOW>; +--- a/arch/arm/boot/dts/bcm4709-netgear-r7000.dts ++++ b/arch/arm/boot/dts/bcm4709-netgear-r7000.dts +@@ -75,19 +75,19 @@ + #address-cells = <1>; + #size-cells = <0>; + +- wps { ++ button-wps { + label = "WPS"; + linux,code = ; + gpios = <&chipcommon 4 GPIO_ACTIVE_LOW>; + }; + +- rfkill { ++ button-rfkill { + label = "WiFi"; + linux,code = ; + gpios = <&chipcommon 5 GPIO_ACTIVE_LOW>; + }; + +- restart { ++ button-restart { + label = "Reset"; + linux,code = ; + gpios = <&chipcommon 6 GPIO_ACTIVE_LOW>; +--- a/arch/arm/boot/dts/bcm4709-netgear-r8000.dts ++++ b/arch/arm/boot/dts/bcm4709-netgear-r8000.dts +@@ -102,25 +102,25 @@ + #address-cells = <1>; + #size-cells = <0>; + +- rfkill { ++ button-rfkill { + label = "WiFi"; + linux,code = ; + gpios = <&chipcommon 4 GPIO_ACTIVE_LOW>; + }; + +- wps { ++ button-wps { + label = "WPS"; + linux,code = ; + gpios = <&chipcommon 5 GPIO_ACTIVE_LOW>; + }; + +- restart { ++ button-restart { + label = "Reset"; + linux,code = ; + gpios = <&chipcommon 6 GPIO_ACTIVE_LOW>; + }; + +- brightness { ++ button-brightness { + label = "Backlight"; + linux,code = ; + gpios = <&chipcommon 19 GPIO_ACTIVE_LOW>; +--- a/arch/arm/boot/dts/bcm4709-tplink-archer-c9-v1.dts ++++ b/arch/arm/boot/dts/bcm4709-tplink-archer-c9-v1.dts +@@ -80,13 +80,13 @@ + #address-cells = <1>; + #size-cells = <0>; + +- wps { ++ button-wps { + label = "WPS"; + linux,code = ; + gpios = <&chipcommon 0 GPIO_ACTIVE_LOW>; + }; + +- restart { ++ button-restart { + label = "Reset"; + linux,code = ; + gpios = <&chipcommon 3 GPIO_ACTIVE_LOW>; +--- a/arch/arm/boot/dts/bcm47094-asus-rt-ac88u.dts ++++ b/arch/arm/boot/dts/bcm47094-asus-rt-ac88u.dts +@@ -72,25 +72,25 @@ + gpio-keys { + compatible = "gpio-keys"; + +- wps { ++ button-wps { + label = "WPS"; + linux,code = ; + gpios = <&chipcommon 20 GPIO_ACTIVE_LOW>; + }; + +- reset { ++ button-reset { + label = "Reset"; + linux,code = ; + gpios = <&chipcommon 11 GPIO_ACTIVE_LOW>; + }; + +- wifi { ++ button-wifi { + label = "Wi-Fi"; + linux,code = ; + gpios = <&chipcommon 18 GPIO_ACTIVE_LOW>; + }; + +- led { ++ button-led { + label = "Backlight"; + linux,code = ; + gpios = <&chipcommon 4 GPIO_ACTIVE_LOW>; +--- a/arch/arm/boot/dts/bcm47094-dlink-dir-885l.dts ++++ b/arch/arm/boot/dts/bcm47094-dlink-dir-885l.dts +@@ -86,20 +86,20 @@ + gpio-keys { + compatible = "gpio-keys"; + +- wps { ++ button-wps { + label = "WPS"; + linux,code = ; + gpios = <&chipcommon 7 GPIO_ACTIVE_LOW>; + }; + + /* Switch: router / extender */ +- extender { ++ button-extender { + label = "Extender"; + linux,code = ; + gpios = <&chipcommon 10 GPIO_ACTIVE_LOW>; + }; + +- restart { ++ button-restart { + label = "Reset"; + linux,code = ; + gpios = <&chipcommon 17 GPIO_ACTIVE_LOW>; +--- a/arch/arm/boot/dts/bcm47094-linksys-panamera.dts ++++ b/arch/arm/boot/dts/bcm47094-linksys-panamera.dts +@@ -30,19 +30,19 @@ + gpio-keys { + compatible = "gpio-keys"; + +- wps { ++ button-wps { + label = "WPS"; + linux,code = ; + gpios = <&chipcommon 3 GPIO_ACTIVE_LOW>; + }; + +- rfkill { ++ button-rfkill { + label = "WiFi"; + linux,code = ; + gpios = <&chipcommon 16 GPIO_ACTIVE_LOW>; + }; + +- reset { ++ button-reset { + label = "Reset"; + linux,code = ; + gpios = <&chipcommon 17 GPIO_ACTIVE_LOW>; +--- a/arch/arm/boot/dts/bcm47094-luxul-abr-4500.dts ++++ b/arch/arm/boot/dts/bcm47094-luxul-abr-4500.dts +@@ -49,7 +49,7 @@ + gpio-keys { + compatible = "gpio-keys"; + +- restart { ++ button-restart { + label = "Reset"; + linux,code = ; + gpios = <&chipcommon 17 GPIO_ACTIVE_LOW>; +--- a/arch/arm/boot/dts/bcm47094-luxul-xap-1610.dts ++++ b/arch/arm/boot/dts/bcm47094-luxul-xap-1610.dts +@@ -43,7 +43,7 @@ + gpio-keys { + compatible = "gpio-keys"; + +- restart { ++ button-restart { + label = "Reset"; + linux,code = ; + gpios = <&chipcommon 17 GPIO_ACTIVE_LOW>; +--- a/arch/arm/boot/dts/bcm47094-luxul-xbr-4500.dts ++++ b/arch/arm/boot/dts/bcm47094-luxul-xbr-4500.dts +@@ -49,7 +49,7 @@ + gpio-keys { + compatible = "gpio-keys"; + +- restart { ++ button-restart { + label = "Reset"; + linux,code = ; + gpios = <&chipcommon 17 GPIO_ACTIVE_LOW>; +--- a/arch/arm/boot/dts/bcm47094-luxul-xwc-2000.dts ++++ b/arch/arm/boot/dts/bcm47094-luxul-xwc-2000.dts +@@ -37,7 +37,7 @@ + #address-cells = <1>; + #size-cells = <0>; + +- restart { ++ button-restart { + label = "Reset"; + linux,code = ; + gpios = <&chipcommon 19 GPIO_ACTIVE_LOW>; +--- a/arch/arm/boot/dts/bcm47094-luxul-xwr-3100.dts ++++ b/arch/arm/boot/dts/bcm47094-luxul-xwr-3100.dts +@@ -89,7 +89,7 @@ + gpio-keys { + compatible = "gpio-keys"; + +- restart { ++ button-restart { + label = "Reset"; + linux,code = ; + gpios = <&chipcommon 17 GPIO_ACTIVE_LOW>; +--- a/arch/arm/boot/dts/bcm47094-luxul-xwr-3150-v1.dts ++++ b/arch/arm/boot/dts/bcm47094-luxul-xwr-3150-v1.dts +@@ -67,7 +67,7 @@ + gpio-keys { + compatible = "gpio-keys"; + +- restart { ++ button-restart { + label = "Reset"; + linux,code = ; + gpios = <&chipcommon 17 GPIO_ACTIVE_LOW>; +--- a/arch/arm/boot/dts/bcm47094-netgear-r8500.dts ++++ b/arch/arm/boot/dts/bcm47094-netgear-r8500.dts +@@ -65,25 +65,25 @@ + gpio-keys { + compatible = "gpio-keys"; + +- brightness { ++ button-brightness { + label = "Backlight"; + linux,code = ; + gpios = <&chipcommon 1 GPIO_ACTIVE_LOW>; + }; + +- restart { ++ button-restart { + label = "Reset"; + linux,code = ; + gpios = <&chipcommon 10 GPIO_ACTIVE_LOW>; + }; + +- wps { ++ button-wps { + label = "WPS"; + linux,code = ; + gpios = <&chipcommon 14 GPIO_ACTIVE_LOW>; + }; + +- rfkill { ++ button-rfkill { + label = "WiFi"; + linux,code = ; + gpios = <&chipcommon 20 GPIO_ACTIVE_LOW>; +--- a/arch/arm/boot/dts/bcm47094-phicomm-k3.dts ++++ b/arch/arm/boot/dts/bcm47094-phicomm-k3.dts +@@ -22,7 +22,7 @@ + gpio-keys { + compatible = "gpio-keys"; + +- restart { ++ button-restart { + label = "Reset"; + linux,code = ; + gpios = <&chipcommon 17 GPIO_ACTIVE_LOW>; +--- a/arch/arm/boot/dts/bcm47189-luxul-xap-1440.dts ++++ b/arch/arm/boot/dts/bcm47189-luxul-xap-1440.dts +@@ -39,7 +39,7 @@ + gpio-keys { + compatible = "gpio-keys"; + +- restart { ++ button-restart { + label = "Reset"; + linux,code = ; + gpios = <&chipcommon 7 GPIO_ACTIVE_LOW>; +--- a/arch/arm/boot/dts/bcm47189-luxul-xap-810.dts ++++ b/arch/arm/boot/dts/bcm47189-luxul-xap-810.dts +@@ -49,7 +49,7 @@ + gpio-keys { + compatible = "gpio-keys"; + +- restart { ++ button-restart { + label = "Reset"; + linux,code = ; + gpios = <&chipcommon 7 GPIO_ACTIVE_LOW>; +--- a/arch/arm/boot/dts/bcm47189-tenda-ac9.dts ++++ b/arch/arm/boot/dts/bcm47189-tenda-ac9.dts +@@ -59,19 +59,19 @@ + gpio-keys { + compatible = "gpio-keys"; + +- rfkill { ++ button-rfkill { + label = "WiFi"; + linux,code = ; + gpios = <&chipcommon 3 GPIO_ACTIVE_LOW>; + }; + +- restart { ++ button-restart { + label = "Reset"; + linux,code = ; + gpios = <&chipcommon 7 GPIO_ACTIVE_LOW>; + }; + +- wps { ++ button-wps { + label = "WPS"; + linux,code = ; + gpios = <&chipcommon 9 GPIO_ACTIVE_LOW>; +--- a/arch/arm/boot/dts/bcm53016-meraki-mr32.dts ++++ b/arch/arm/boot/dts/bcm53016-meraki-mr32.dts +@@ -50,7 +50,7 @@ + #address-cells = <1>; + #size-cells = <0>; + +- restart { ++ button-restart { + label = "Reset"; + linux,code = ; + gpios = <&chipcommon 21 GPIO_ACTIVE_LOW>; +--- a/arch/arm/boot/dts/bcm911360_entphn.dts ++++ b/arch/arm/boot/dts/bcm911360_entphn.dts +@@ -47,10 +47,10 @@ + stdout-path = "serial0:115200n8"; + }; + +- gpio_keys { ++ gpio-keys { + compatible = "gpio-keys"; + +- hook { ++ button-hook { + label = "HOOK"; + linux,code = ; + gpios = <&gpio_asiu 48 0>; +--- a/arch/arm/boot/dts/bcm947189acdbmr.dts ++++ b/arch/arm/boot/dts/bcm947189acdbmr.dts +@@ -44,13 +44,13 @@ + gpio-keys { + compatible = "gpio-keys"; + +- restart { ++ button-restart { + label = "Reset"; + linux,code = ; + gpios = <&chipcommon 7 GPIO_ACTIVE_HIGH>; + }; + +- wps { ++ button-wps { + label = "WPS"; + linux,code = ; + gpios = <&chipcommon 9 GPIO_ACTIVE_LOW>; +--- a/arch/arm/boot/dts/bcm953012er.dts ++++ b/arch/arm/boot/dts/bcm953012er.dts +@@ -47,13 +47,13 @@ + gpio-keys { + compatible = "gpio-keys"; + +- wps { ++ button-wps { + label = "WPS"; + linux,code = ; + gpios = <&chipcommon 6 GPIO_ACTIVE_LOW>; + }; + +- restart { ++ button-restart { + label = "Reset"; + linux,code = ; + gpios = <&chipcommon 15 GPIO_ACTIVE_LOW>; +--- a/arch/arm/boot/dts/bcm958625-meraki-alamo.dtsi ++++ b/arch/arm/boot/dts/bcm958625-meraki-alamo.dtsi +@@ -13,7 +13,7 @@ + autorepeat; + poll-interval = <20>; + +- reset { ++ button-reset { + label = "reset"; + linux,code = ; + gpios = <&gpioa 8 GPIO_ACTIVE_LOW>; +--- a/arch/arm/boot/dts/bcm958625-meraki-kingpin.dtsi ++++ b/arch/arm/boot/dts/bcm958625-meraki-kingpin.dtsi +@@ -14,7 +14,7 @@ + autorepeat; + poll-interval = <20>; + +- reset { ++ button-reset { + label = "reset"; + linux,code = ; + gpios = <&gpioa 6 GPIO_ACTIVE_LOW>; diff --git a/target/linux/bcm53xx/patches-5.10/037-v6.0-0002-ARM-dts-broadcom-correct-gpio-keys-properties.patch b/target/linux/bcm53xx/patches-5.10/037-v6.0-0002-ARM-dts-broadcom-correct-gpio-keys-properties.patch new file mode 100644 index 0000000000..7bded431b0 --- /dev/null +++ b/target/linux/bcm53xx/patches-5.10/037-v6.0-0002-ARM-dts-broadcom-correct-gpio-keys-properties.patch @@ -0,0 +1,108 @@ +From d634a6969c03803a945fdc2bccbe7d813420e569 Mon Sep 17 00:00:00 2001 +From: Krzysztof Kozlowski +Date: Thu, 9 Jun 2022 13:39:31 +0200 +Subject: [PATCH] ARM: dts: broadcom: correct gpio-keys properties + +gpio-keys children do not use unit addresses. + +Signed-off-by: Krzysztof Kozlowski +Signed-off-by: Florian Fainelli +--- + arch/arm/boot/dts/bcm4709-asus-rt-ac87u.dts | 2 -- + arch/arm/boot/dts/bcm4709-buffalo-wxr-1900dhp.dts | 2 -- + arch/arm/boot/dts/bcm4709-linksys-ea9200.dts | 2 -- + arch/arm/boot/dts/bcm4709-netgear-r7000.dts | 2 -- + arch/arm/boot/dts/bcm4709-netgear-r8000.dts | 2 -- + arch/arm/boot/dts/bcm4709-tplink-archer-c9-v1.dts | 2 -- + arch/arm/boot/dts/bcm47094-luxul-xwc-2000.dts | 2 -- + arch/arm/boot/dts/bcm53016-meraki-mr32.dts | 2 -- + 8 files changed, 16 deletions(-) + +--- a/arch/arm/boot/dts/bcm4709-asus-rt-ac87u.dts ++++ b/arch/arm/boot/dts/bcm4709-asus-rt-ac87u.dts +@@ -47,8 +47,6 @@ + + gpio-keys { + compatible = "gpio-keys"; +- #address-cells = <1>; +- #size-cells = <0>; + + button-wps { + label = "WPS"; +--- a/arch/arm/boot/dts/bcm4709-buffalo-wxr-1900dhp.dts ++++ b/arch/arm/boot/dts/bcm4709-buffalo-wxr-1900dhp.dts +@@ -77,8 +77,6 @@ + + gpio-keys { + compatible = "gpio-keys"; +- #address-cells = <1>; +- #size-cells = <0>; + + button-power { + label = "Power"; +--- a/arch/arm/boot/dts/bcm4709-linksys-ea9200.dts ++++ b/arch/arm/boot/dts/bcm4709-linksys-ea9200.dts +@@ -29,8 +29,6 @@ + + gpio-keys { + compatible = "gpio-keys"; +- #address-cells = <1>; +- #size-cells = <0>; + + button-wps { + label = "WPS"; +--- a/arch/arm/boot/dts/bcm4709-netgear-r7000.dts ++++ b/arch/arm/boot/dts/bcm4709-netgear-r7000.dts +@@ -72,8 +72,6 @@ + + gpio-keys { + compatible = "gpio-keys"; +- #address-cells = <1>; +- #size-cells = <0>; + + button-wps { + label = "WPS"; +--- a/arch/arm/boot/dts/bcm4709-netgear-r8000.dts ++++ b/arch/arm/boot/dts/bcm4709-netgear-r8000.dts +@@ -99,8 +99,6 @@ + + gpio-keys { + compatible = "gpio-keys"; +- #address-cells = <1>; +- #size-cells = <0>; + + button-rfkill { + label = "WiFi"; +--- a/arch/arm/boot/dts/bcm4709-tplink-archer-c9-v1.dts ++++ b/arch/arm/boot/dts/bcm4709-tplink-archer-c9-v1.dts +@@ -77,8 +77,6 @@ + + gpio-keys { + compatible = "gpio-keys"; +- #address-cells = <1>; +- #size-cells = <0>; + + button-wps { + label = "WPS"; +--- a/arch/arm/boot/dts/bcm47094-luxul-xwc-2000.dts ++++ b/arch/arm/boot/dts/bcm47094-luxul-xwc-2000.dts +@@ -34,8 +34,6 @@ + + gpio-keys { + compatible = "gpio-keys"; +- #address-cells = <1>; +- #size-cells = <0>; + + button-restart { + label = "Reset"; +--- a/arch/arm/boot/dts/bcm53016-meraki-mr32.dts ++++ b/arch/arm/boot/dts/bcm53016-meraki-mr32.dts +@@ -47,8 +47,6 @@ + + keys { + compatible = "gpio-keys"; +- #address-cells = <1>; +- #size-cells = <0>; + + button-restart { + label = "Reset"; diff --git a/target/linux/bcm53xx/patches-5.10/038-v6.1-0001-ARM-dts-BCM5301X-Correct-description-of-TP-Link-part.patch b/target/linux/bcm53xx/patches-5.10/038-v6.1-0001-ARM-dts-BCM5301X-Correct-description-of-TP-Link-part.patch new file mode 100644 index 0000000000..4c4ed036b9 --- /dev/null +++ b/target/linux/bcm53xx/patches-5.10/038-v6.1-0001-ARM-dts-BCM5301X-Correct-description-of-TP-Link-part.patch @@ -0,0 +1,99 @@ +From c8ee9f119bfb4244f76c9971c341ec06b49332cd Mon Sep 17 00:00:00 2001 +From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= +Date: Tue, 8 Nov 2022 12:07:08 +0100 +Subject: [PATCH] ARM: dts: BCM5301X: Correct description of TP-Link partitions +MIME-Version: 1.0 +Content-Type: text/plain; charset=UTF-8 +Content-Transfer-Encoding: 8bit + +TP-Link routers have flash space partitioned according to the partitions +table. It may look like fixed partitioning but those partitions can be +actually reorganized. New can be added (or some removed), offsets and +sizes may change. + +Fix DT to use binding for the TP-Link SafeLoader partitioning method. + +Signed-off-by: Rafał Miłecki +Link: https://lore.kernel.org/r/20221108110708.13693-1-zajec5@gmail.com +Signed-off-by: Florian Fainelli +--- + .../boot/dts/bcm47081-tplink-archer-c5-v2.dts | 25 ++++--------------- + .../boot/dts/bcm4709-tplink-archer-c9-v1.dts | 25 ++++--------------- + 2 files changed, 10 insertions(+), 40 deletions(-) + +--- a/arch/arm/boot/dts/bcm47081-tplink-archer-c5-v2.dts ++++ b/arch/arm/boot/dts/bcm47081-tplink-archer-c5-v2.dts +@@ -95,30 +95,15 @@ + status = "okay"; + + partitions { +- compatible = "fixed-partitions"; +- #address-cells = <1>; +- #size-cells = <1>; ++ compatible = "tplink,safeloader-partitions"; ++ partitions-table-offset = <0xe50000>; + +- boot@0 { +- label = "boot"; +- reg = <0x000000 0x040000>; +- read-only; +- }; +- +- os-image@100000 { +- label = "os-image"; +- reg = <0x040000 0x200000>; ++ partition-os-image { + compatible = "brcm,trx"; + }; + +- rootfs@240000 { +- label = "rootfs"; +- reg = <0x240000 0xc00000>; +- }; +- +- nvram@ff0000 { +- label = "nvram"; +- reg = <0xff0000 0x010000>; ++ partition-file-system { ++ linux,rootfs; + }; + }; + }; +--- a/arch/arm/boot/dts/bcm4709-tplink-archer-c9-v1.dts ++++ b/arch/arm/boot/dts/bcm4709-tplink-archer-c9-v1.dts +@@ -104,30 +104,15 @@ + status = "okay"; + + partitions { +- compatible = "fixed-partitions"; +- #address-cells = <1>; +- #size-cells = <1>; ++ compatible = "tplink,safeloader-partitions"; ++ partitions-table-offset = <0xe50000>; + +- boot@0 { +- label = "boot"; +- reg = <0x000000 0x040000>; +- read-only; +- }; +- +- os-image@100000 { +- label = "os-image"; +- reg = <0x040000 0x200000>; ++ partition-os-image { + compatible = "brcm,trx"; + }; + +- rootfs@240000 { +- label = "rootfs"; +- reg = <0x240000 0xc00000>; +- }; +- +- nvram@ff0000 { +- label = "nvram"; +- reg = <0xff0000 0x010000>; ++ partition-file-system { ++ linux,rootfs; + }; + }; + }; diff --git a/target/linux/bcm53xx/patches-5.10/038-v6.1-0001-ARM-dts-bcm47094-Add-devicetree-for-D-Link-DIR-890L.patch b/target/linux/bcm53xx/patches-5.10/038-v6.1-0001-ARM-dts-bcm47094-Add-devicetree-for-D-Link-DIR-890L.patch new file mode 100644 index 0000000000..e921e55461 --- /dev/null +++ b/target/linux/bcm53xx/patches-5.10/038-v6.1-0001-ARM-dts-bcm47094-Add-devicetree-for-D-Link-DIR-890L.patch @@ -0,0 +1,242 @@ +From b1ba87897ceda8e49a47aa92832dd7bff8583e21 Mon Sep 17 00:00:00 2001 +From: Linus Walleij +Date: Mon, 7 Nov 2022 14:41:04 +0100 +Subject: [PATCH] ARM: dts: bcm47094: Add devicetree for D-Link DIR-890L + +This adds a device tree for the D-Link DIR-890L. This device +is very similar to D-Link DIR-885L, the differences are detailed +as a comment in the DTS file. + +Signed-off-by: Linus Walleij +Link: https://lore.kernel.org/r/20221107134104.1422169-2-linus.walleij@linaro.org +Signed-off-by: Florian Fainelli +--- + arch/arm/boot/dts/Makefile | 1 + + arch/arm/boot/dts/bcm47094-dlink-dir-890l.dts | 211 ++++++++++++++++++ + 2 files changed, 212 insertions(+) + create mode 100644 arch/arm/boot/dts/bcm47094-dlink-dir-890l.dts + +--- a/arch/arm/boot/dts/Makefile ++++ b/arch/arm/boot/dts/Makefile +@@ -122,6 +122,7 @@ dtb-$(CONFIG_ARCH_BCM_5301X) += \ + bcm4709-tplink-archer-c9-v1.dtb \ + bcm47094-asus-rt-ac88u.dtb \ + bcm47094-dlink-dir-885l.dtb \ ++ bcm47094-dlink-dir-890l.dtb \ + bcm47094-linksys-panamera.dtb \ + bcm47094-luxul-abr-4500.dtb \ + bcm47094-luxul-xap-1610.dtb \ +--- /dev/null ++++ b/arch/arm/boot/dts/bcm47094-dlink-dir-890l.dts +@@ -0,0 +1,211 @@ ++// SPDX-License-Identifier: GPL-2.0-or-later OR MIT ++/* ++ * Device tree for D-Link DIR-890L ++ * D-Link calls this board "WRGAC36" ++ * this router has the same looks and form factor as D-Link DIR-885L. ++ * ++ * Some differences from DIR-885L include a separate USB2 port, separate LEDs ++ * for USB2 and USB3, a separate VCC supply for the USB2 slot and no ++ * router/extender switch is mounted (there is an empty mount point on the ++ * PCB) so this device is a pure router. Also the LAN ports are in the right ++ * order. ++ * ++ * Based on the device tree for DIR-885L ++ * Copyright (C) 2016 Rafał Miłecki ++ * Copyright (C) 2022 Linus Walleij ++ */ ++ ++/dts-v1/; ++ ++#include "bcm47094.dtsi" ++#include "bcm5301x-nand-cs0-bch1.dtsi" ++ ++/ { ++ compatible = "dlink,dir-890l", "brcm,bcm47094", "brcm,bcm4708"; ++ model = "D-Link DIR-890L"; ++ ++ chosen { ++ bootargs = "console=ttyS0,115200 earlycon"; ++ }; ++ ++ memory@0 { ++ device_type = "memory"; ++ reg = <0x00000000 0x08000000>, ++ <0x88000000 0x08000000>; ++ }; ++ ++ leds { ++ /* ++ * LED information is derived from the boot log which ++ * conveniently lists all the LEDs. ++ */ ++ compatible = "gpio-leds"; ++ ++ power-white { ++ label = "bcm53xx:white:power"; ++ gpios = <&chipcommon 0 GPIO_ACTIVE_LOW>; ++ linux,default-trigger = "default-on"; ++ }; ++ ++ wan-white { ++ label = "bcm53xx:white:wan"; ++ gpios = <&chipcommon 1 GPIO_ACTIVE_LOW>; ++ }; ++ ++ power-amber { ++ label = "bcm53xx:amber:power"; ++ gpios = <&chipcommon 2 GPIO_ACTIVE_LOW>; ++ }; ++ ++ wan-amber { ++ label = "bcm53xx:amber:wan"; ++ gpios = <&chipcommon 3 GPIO_ACTIVE_LOW>; ++ }; ++ ++ usb3-white { ++ label = "bcm53xx:white:usb3"; ++ gpios = <&chipcommon 8 GPIO_ACTIVE_LOW>; ++ trigger-sources = <&xhci_port1>; ++ linux,default-trigger = "usbport"; ++ }; ++ ++ usb2-white { ++ label = "bcm53xx:white:usb2"; ++ gpios = <&chipcommon 15 GPIO_ACTIVE_LOW>; ++ trigger-sources = <&ohci_port1>, <&ehci_port1>; ++ linux,default-trigger = "usbport"; ++ }; ++ ++ 2ghz { ++ label = "bcm53xx:white:2ghz"; ++ gpios = <&chipcommon 13 GPIO_ACTIVE_LOW>; ++ }; ++ ++ 5ghz { ++ label = "bcm53xx:white:5ghz"; ++ gpios = <&chipcommon 14 GPIO_ACTIVE_LOW>; ++ }; ++ }; ++ ++ gpio-keys { ++ compatible = "gpio-keys"; ++ ++ button-wps { ++ label = "WPS"; ++ linux,code = ; ++ gpios = <&chipcommon 7 GPIO_ACTIVE_LOW>; ++ }; ++ ++ /* Called "factory reset" in the vendor dmesg */ ++ button-restart { ++ label = "Reset"; ++ linux,code = ; ++ gpios = <&chipcommon 17 GPIO_ACTIVE_LOW>; ++ }; ++ }; ++ ++ /* ++ * The flash memory is memory mapped at 0x1e000000-0x1fffffff ++ * 64KB blocks; total size 2MB, same that can be ++ * found attached to the spi_nor SPI controller. ++ */ ++ nvram@1e1f0000 { ++ compatible = "brcm,nvram"; ++ reg = <0x1e1f0000 0x00010000>; ++ ++ et0macaddr: et0macaddr { ++ }; ++ }; ++}; ++ ++&gmac2 { ++ /* ++ * The NVRAM curiously does not contain a MAC address ++ * for et2 so since that is the only ethernet interface ++ * actually in use on the platform, we use this et0 MAC ++ * address for et2. ++ */ ++ nvmem-cells = <&et0macaddr>; ++ nvmem-cell-names = "mac-address"; ++}; ++ ++&spi_nor { ++ status = "okay"; ++}; ++ ++&nandcs { ++ /* Spansion S34ML01G2, 128MB with 128KB erase blocks */ ++ partitions { ++ compatible = "fixed-partitions"; ++ #address-cells = <1>; ++ #size-cells = <1>; ++ ++ /* ++ * This is called "nflash" in the vendor kernel with ++ * "upgrade" and "rootfs" (probably using OpenWrt ++ * splitpart). We call it "firmware" like standard tools ++ * assume. The CFE loader contains incorrect information ++ * about TRX partitions, ignore this, there are no TRX ++ * partitions: this device uses SEAMA. ++ */ ++ firmware@0 { ++ label = "firmware"; ++ reg = <0x00000000 0x08000000>; ++ }; ++ }; ++}; ++ ++&usb2 { ++ vcc-gpios = <&chipcommon 21 GPIO_ACTIVE_HIGH>; ++}; ++ ++&usb3 { ++ vcc-gpios = <&chipcommon 18 GPIO_ACTIVE_HIGH>; ++}; ++ ++&usb3_phy { ++ status = "okay"; ++}; ++ ++&srab { ++ status = "okay"; ++ ++ ports { ++ port@0 { ++ reg = <0>; ++ label = "lan1"; ++ }; ++ ++ port@1 { ++ reg = <1>; ++ label = "lan2"; ++ }; ++ ++ port@2 { ++ reg = <2>; ++ label = "lan3"; ++ }; ++ ++ port@3 { ++ reg = <3>; ++ label = "lan4"; ++ }; ++ ++ port@4 { ++ reg = <4>; ++ label = "wan"; ++ }; ++ ++ port@8 { ++ reg = <8>; ++ label = "cpu"; ++ ethernet = <&gmac2>; ++ phy-mode = "rgmii"; ++ ++ fixed-link { ++ speed = <1000>; ++ full-duplex; ++ }; ++ }; ++ }; ++}; diff --git a/target/linux/bcm53xx/patches-5.10/038-v6.1-0001-ARM-dts-bcm53016-Add-devicetree-for-D-Link-DWL-8610A.patch b/target/linux/bcm53xx/patches-5.10/038-v6.1-0001-ARM-dts-bcm53016-Add-devicetree-for-D-Link-DWL-8610A.patch new file mode 100644 index 0000000000..c02c80065b --- /dev/null +++ b/target/linux/bcm53xx/patches-5.10/038-v6.1-0001-ARM-dts-bcm53016-Add-devicetree-for-D-Link-DWL-8610A.patch @@ -0,0 +1,165 @@ +From 9f66e1dd82e3186aee95282657512ca2aef1afe0 Mon Sep 17 00:00:00 2001 +From: Linus Walleij +Date: Wed, 19 Oct 2022 21:34:49 +0200 +Subject: [PATCH] ARM: dts: bcm53016: Add devicetree for D-Link DWL-8610AP + +This adds a device tree for the BCM53016-based D-Link DWL-8610AP +access point wireless router. + +The TRX-format partitions had to be named "firmware" due to +an OpenWrt patch that only accepts parting such nodes if they +are named "firmware". + +Signed-off-by: Linus Walleij +Link: https://lore.kernel.org/r/20221019193449.3036010-2-linus.walleij@linaro.org +Signed-off-by: Florian Fainelli +--- + arch/arm/boot/dts/Makefile | 1 + + .../boot/dts/bcm53016-dlink-dwl-8610ap.dts | 131 ++++++++++++++++++ + 2 files changed, 132 insertions(+) + create mode 100644 arch/arm/boot/dts/bcm53016-dlink-dwl-8610ap.dts + +--- a/arch/arm/boot/dts/Makefile ++++ b/arch/arm/boot/dts/Makefile +@@ -133,6 +133,7 @@ dtb-$(CONFIG_ARCH_BCM_5301X) += \ + bcm47094-netgear-r8500.dtb \ + bcm47094-phicomm-k3.dtb \ + bcm53015-meraki-mr26.dtb \ ++ bcm53016-dlink-dwl-8610ap.dtb \ + bcm53016-meraki-mr32.dtb \ + bcm94708.dtb \ + bcm94709.dtb \ +--- /dev/null ++++ b/arch/arm/boot/dts/bcm53016-dlink-dwl-8610ap.dts +@@ -0,0 +1,131 @@ ++// SPDX-License-Identifier: GPL-2.0-or-later OR MIT ++/dts-v1/; ++ ++#include "bcm4709.dtsi" ++#include "bcm5301x-nand-cs0-bch8.dtsi" ++#include ++#include ++ ++/ { ++ model = "D-Link DWL-8610AP"; ++ compatible = "dlink,dwl-8610ap", "brcm,bcm53016", "brcm,bcm4708"; ++ ++ memory@0 { ++ device_type = "memory"; ++ /* 512 MB RAM in 2 x Macronix D9PSH chips */ ++ reg = <0x00000000 0x08000000>, ++ <0x88000000 0x08000000>; ++ }; ++ ++ leds { ++ compatible = "gpio-leds"; ++ ++ power { ++ function = LED_FUNCTION_POWER; ++ color = ; ++ gpios = <&chipcommon 0 GPIO_ACTIVE_LOW>; ++ default-state = "on"; ++ }; ++ ++ diag { ++ /* Actually "diag" unclear what this means */ ++ function = LED_FUNCTION_INDICATOR; ++ color = ; ++ gpios = <&chipcommon 1 GPIO_ACTIVE_LOW>; ++ default-state = "on"; ++ linux,default-trigger = "heartbeat"; ++ }; ++ ++ wlan-2g { ++ function = LED_FUNCTION_WLAN; ++ color = ; ++ gpios = <&chipcommon 5 GPIO_ACTIVE_LOW>; ++ }; ++ ++ wlan-5g { ++ function = LED_FUNCTION_WLAN; ++ color = ; ++ gpios = <&chipcommon 8 GPIO_ACTIVE_LOW>; ++ }; ++ }; ++ ++ gpio_keys { ++ compatible = "gpio-keys"; ++ ++ button-reset { ++ debounce-interval = <100>; ++ wakeup-source; ++ linux,code = ; ++ label = "reset"; ++ /* This GPIO is actually stored in NVRAM, but it's not gonna change */ ++ gpios = <&chipcommon 4 GPIO_ACTIVE_LOW>; ++ }; ++ }; ++ ++ /* ++ * Flash memory at 0x1e000000-0x1fffffff ++ * Macronix 32 64KB blocks; total size 2MB, same that can be ++ * found attached to the spi_nor SPI controller. ++ */ ++ nvram@1e080000 { ++ compatible = "brcm,nvram"; ++ reg = <0x1e080000 0x00020000>; ++ ++ et0macaddr: et0macaddr { ++ }; ++ ++ et1macaddr: et1macaddr { ++ }; ++ }; ++}; ++ ++&gmac0 { ++ nvmem-cells = <&et0macaddr>; ++ nvmem-cell-names = "mac-address"; ++}; ++ ++&gmac1 { ++ nvmem-cells = <&et1macaddr>; ++ nvmem-cell-names = "mac-address"; ++}; ++ ++&spi_nor { ++ /* Serial SPI NOR Flash MX 25L1606E */ ++ status = "okay"; ++}; ++ ++&nandcs { ++ /* ++ * Spansion S34ML01G100TFI00 128 MB NAND Flash memory ++ * ++ * This ECC is a bit unorthodox but it is what the stock firmware ++ * is using, so to be able to mount the original partitions ++ * this is necessary. ++ */ ++ nand-ecc-strength = <5>; ++ partitions { ++ compatible = "fixed-partitions"; ++ #address-cells = <1>; ++ #size-cells = <1>; ++ ++ /* This is named nflash1.trx in CFE */ ++ trx@0 { ++ label = "firmware"; ++ reg = <0x00000000 0x02800000>; ++ compatible = "brcm,trx"; ++ }; ++ ++ /* This is named nflash1.trx2 in CFE */ ++ trx2@2800000 { ++ label = "firmware2"; ++ reg = <0x02800000 0x02800000>; ++ compatible = "brcm,trx"; ++ }; ++ ++ /* This is named nflash1.rwfs in CFE */ ++ free@5000000 { ++ label = "free"; ++ reg = <0x05000000 0x03000000>; ++ }; ++ }; ++}; diff --git a/target/linux/bcm53xx/patches-5.10/304-ARM-dts-BCM5301X-Specify-switch-ports-for-remaining-.patch b/target/linux/bcm53xx/patches-5.10/304-ARM-dts-BCM5301X-Specify-switch-ports-for-remaining-.patch index 8b2b5e49c9..ffea250ccb 100644 --- a/target/linux/bcm53xx/patches-5.10/304-ARM-dts-BCM5301X-Specify-switch-ports-for-remaining-.patch +++ b/target/linux/bcm53xx/patches-5.10/304-ARM-dts-BCM5301X-Specify-switch-ports-for-remaining-.patch @@ -311,7 +311,7 @@ Signed-off-by: Rafał Miłecki +}; --- a/arch/arm/boot/dts/bcm4709-asus-rt-ac87u.dts +++ b/arch/arm/boot/dts/bcm4709-asus-rt-ac87u.dts -@@ -68,6 +68,38 @@ +@@ -66,6 +66,38 @@ status = "okay"; }; @@ -352,7 +352,7 @@ Signed-off-by: Rafał Miłecki compatible = "fixed-partitions"; --- a/arch/arm/boot/dts/bcm4709-buffalo-wxr-1900dhp.dts +++ b/arch/arm/boot/dts/bcm4709-buffalo-wxr-1900dhp.dts -@@ -132,3 +132,40 @@ +@@ -130,3 +130,40 @@ &usb3_phy { status = "okay"; }; @@ -395,7 +395,7 @@ Signed-off-by: Rafał Miłecki +}; --- a/arch/arm/boot/dts/bcm4709-linksys-ea9200.dts +++ b/arch/arm/boot/dts/bcm4709-linksys-ea9200.dts -@@ -49,3 +49,45 @@ +@@ -47,3 +47,45 @@ &usb3_phy { status = "okay"; }; @@ -443,7 +443,7 @@ Signed-off-by: Rafał Miłecki +}; --- a/arch/arm/boot/dts/bcm4709-netgear-r7000.dts +++ b/arch/arm/boot/dts/bcm4709-netgear-r7000.dts -@@ -106,3 +106,40 @@ +@@ -104,3 +104,40 @@ &usb3_phy { status = "okay"; }; @@ -621,7 +621,7 @@ Signed-off-by: Rafał Miłecki --- a/arch/arm/boot/dts/bcm4709-tplink-archer-c9-v1.dts +++ b/arch/arm/boot/dts/bcm4709-tplink-archer-c9-v1.dts -@@ -102,6 +102,43 @@ +@@ -100,6 +100,43 @@ vcc-gpio = <&chipcommon 12 GPIO_ACTIVE_HIGH>; }; diff --git a/target/linux/bcm53xx/patches-5.10/310-ARM-BCM5301X-Add-DT-for-Netgear-R7900.patch b/target/linux/bcm53xx/patches-5.10/310-ARM-BCM5301X-Add-DT-for-Netgear-R7900.patch index 7c2dad6ae2..923b4a0f37 100644 --- a/target/linux/bcm53xx/patches-5.10/310-ARM-BCM5301X-Add-DT-for-Netgear-R7900.patch +++ b/target/linux/bcm53xx/patches-5.10/310-ARM-BCM5301X-Add-DT-for-Netgear-R7900.patch @@ -9,7 +9,7 @@ Signed-off-by: Rafał Miłecki --- a/arch/arm/boot/dts/Makefile +++ b/arch/arm/boot/dts/Makefile -@@ -116,6 +116,7 @@ dtb-$(CONFIG_ARCH_BCM_5301X) += \ +@@ -118,6 +118,7 @@ dtb-$(CONFIG_ARCH_BCM_5301X) += \ bcm4709-buffalo-wxr-1900dhp.dtb \ bcm4709-linksys-ea9200.dtb \ bcm4709-netgear-r7000.dtb \ diff --git a/target/linux/bcm53xx/patches-5.10/331-Meraki-MR32-Status-LEDs.patch b/target/linux/bcm53xx/patches-5.10/331-Meraki-MR32-Status-LEDs.patch index fb78ee93c4..92a71e58fe 100644 --- a/target/linux/bcm53xx/patches-5.10/331-Meraki-MR32-Status-LEDs.patch +++ b/target/linux/bcm53xx/patches-5.10/331-Meraki-MR32-Status-LEDs.patch @@ -17,7 +17,7 @@ Signed-off-by: Christian Lamparter }; leds { -@@ -68,7 +69,7 @@ +@@ -66,7 +67,7 @@ max-brightness = <255>; }; -- 2.30.2