From b64d97300888a51b0c122e96457faa7059b6987b Mon Sep 17 00:00:00 2001 From: Stefan Popa Date: Thu, 31 Jan 2019 18:21:42 +0200 Subject: [PATCH] dt-bindings: iio: adc: Add docs for AD7768-1 Document support for AD7768-1 Analog to Digital Converter. Signed-off-by: Stefan Popa Reviewed-by: Rob Herring Signed-off-by: Jonathan Cameron --- .../bindings/iio/adc/adi,ad7768-1.txt | 41 +++++++++++++++++++ MAINTAINERS | 1 + 2 files changed, 42 insertions(+) create mode 100644 Documentation/devicetree/bindings/iio/adc/adi,ad7768-1.txt diff --git a/Documentation/devicetree/bindings/iio/adc/adi,ad7768-1.txt b/Documentation/devicetree/bindings/iio/adc/adi,ad7768-1.txt new file mode 100644 index 000000000000..9f5b88cf680d --- /dev/null +++ b/Documentation/devicetree/bindings/iio/adc/adi,ad7768-1.txt @@ -0,0 +1,41 @@ +Analog Devices AD7768-1 ADC device driver + +Required properties for the AD7768-1: + +- compatible: Must be "adi,ad7768-1" +- reg: SPI chip select number for the device +- spi-max-frequency: Max SPI frequency to use + see: Documentation/devicetree/bindings/spi/spi-bus.txt +- clocks: phandle to the master clock (mclk) + see: Documentation/devicetree/bindings/clock/clock-bindings.txt +- clock-names: Must be "mclk". +- interrupts: IRQ line for the ADC + see: Documentation/devicetree/bindings/interrupt-controller/interrupts.txt +- vref-supply: vref supply can be used as reference for conversion +- adi,sync-in-gpios: must be the device tree identifier of the SYNC-IN pin. Enables + synchronization of multiple devices that require simultaneous sampling. + A pulse is always required if the configuration is changed in any way, for example + if the filter decimation rate changes. As the line is active low, it should + be marked GPIO_ACTIVE_LOW. + +Optional properties: + + - reset-gpios : GPIO spec for the RESET pin. If specified, it will be asserted during + driver probe. As the line is active low, it should be marked GPIO_ACTIVE_LOW. + +Example: + + adc@0 { + compatible = "adi,ad7768-1"; + reg = <0>; + spi-max-frequency = <2000000>; + spi-cpol; + spi-cpha; + vref-supply = <&adc_vref>; + interrupts = <25 IRQ_TYPE_EDGE_RISING>; + interrupt-parent = <&gpio>; + adi,sync-in-gpios = <&gpio 22 GPIO_ACTIVE_LOW>; + reset-gpios = <&gpio 27 GPIO_ACTIVE_LOW>; + clocks = <&ad7768_mclk>; + clock-names = "mclk"; + }; diff --git a/MAINTAINERS b/MAINTAINERS index 3ba38114853c..e5613b69f2bd 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -868,6 +868,7 @@ L: linux-iio@vger.kernel.org W: http://ez.analog.com/community/linux-device-drivers S: Supported F: drivers/iio/adc/ad7768-1.c +F: Documentation/devicetree/bindings/iio/adc/adi,ad7768-1.txt ANALOG DEVICES INC AD9389B DRIVER M: Hans Verkuil -- 2.30.2