From b4a38d4276e1c3ca46141d6424a8da86bc5b74b0 Mon Sep 17 00:00:00 2001 From: Vinicius Costa Gomes Date: Tue, 10 Apr 2018 10:49:57 -0700 Subject: [PATCH] igb: Add MAC address support for ethtool nftuple filters This adds the capability of configuring the queue steering of arriving packets based on their source and destination MAC addresses. Source address steering (i.e. driving traffic to a specific queue), for the i210, does not work, but filtering does (i.e. accepting traffic based on the source address). So, trying to add a filter specifying only a source address will be an error. In practical terms this adds support for the following use cases, characterized by these examples: $ ethtool -N eth0 flow-type ether dst aa:aa:aa:aa:aa:aa action 0 (this will direct packets with destination address "aa:aa:aa:aa:aa:aa" to the RX queue 0) $ ethtool -N eth0 flow-type ether src 44:44:44:44:44:44 \ proto 0x22f0 action 3 (this will direct packets with source address "44:44:44:44:44:44" and ethertype 0x22f0 to the RX queue 3) Signed-off-by: Vinicius Costa Gomes Tested-by: Aaron Brown Signed-off-by: Jeff Kirsher --- drivers/net/ethernet/intel/igb/igb_ethtool.c | 43 ++++++++++++++++++-- 1 file changed, 39 insertions(+), 4 deletions(-) diff --git a/drivers/net/ethernet/intel/igb/igb_ethtool.c b/drivers/net/ethernet/intel/igb/igb_ethtool.c index 31b2960a7869..6697c273ab59 100644 --- a/drivers/net/ethernet/intel/igb/igb_ethtool.c +++ b/drivers/net/ethernet/intel/igb/igb_ethtool.c @@ -2495,6 +2495,23 @@ static int igb_get_ethtool_nfc_entry(struct igb_adapter *adapter, fsp->h_ext.vlan_tci = rule->filter.vlan_tci; fsp->m_ext.vlan_tci = htons(VLAN_PRIO_MASK); } + if (rule->filter.match_flags & IGB_FILTER_FLAG_DST_MAC_ADDR) { + ether_addr_copy(fsp->h_u.ether_spec.h_dest, + rule->filter.dst_addr); + /* As we only support matching by the full + * mask, return the mask to userspace + */ + eth_broadcast_addr(fsp->m_u.ether_spec.h_dest); + } + if (rule->filter.match_flags & IGB_FILTER_FLAG_SRC_MAC_ADDR) { + ether_addr_copy(fsp->h_u.ether_spec.h_source, + rule->filter.src_addr); + /* As we only support matching by the full + * mask, return the mask to userspace + */ + eth_broadcast_addr(fsp->m_u.ether_spec.h_source); + } + return 0; } return -EINVAL; @@ -2768,8 +2785,16 @@ static int igb_rxnfc_write_vlan_prio_filter(struct igb_adapter *adapter, int igb_add_filter(struct igb_adapter *adapter, struct igb_nfc_filter *input) { + struct e1000_hw *hw = &adapter->hw; int err = -EINVAL; + if (hw->mac.type == e1000_i210 && + !(input->filter.match_flags & ~IGB_FILTER_FLAG_SRC_MAC_ADDR)) { + dev_err(&adapter->pdev->dev, + "i210 doesn't support flow classification rules specifying only source addresses.\n"); + return -EOPNOTSUPP; + } + if (input->filter.match_flags & IGB_FILTER_FLAG_ETHER_TYPE) { err = igb_rxnfc_write_etype_filter(adapter, input); if (err) @@ -2933,10 +2958,6 @@ static int igb_add_ethtool_nfc_entry(struct igb_adapter *adapter, if ((fsp->flow_type & ~FLOW_EXT) != ETHER_FLOW) return -EINVAL; - if (fsp->m_u.ether_spec.h_proto != ETHER_TYPE_FULL_MASK && - fsp->m_ext.vlan_tci != htons(VLAN_PRIO_MASK)) - return -EINVAL; - input = kzalloc(sizeof(*input), GFP_KERNEL); if (!input) return -ENOMEM; @@ -2946,6 +2967,20 @@ static int igb_add_ethtool_nfc_entry(struct igb_adapter *adapter, input->filter.match_flags = IGB_FILTER_FLAG_ETHER_TYPE; } + /* Only support matching addresses by the full mask */ + if (is_broadcast_ether_addr(fsp->m_u.ether_spec.h_source)) { + input->filter.match_flags |= IGB_FILTER_FLAG_SRC_MAC_ADDR; + ether_addr_copy(input->filter.src_addr, + fsp->h_u.ether_spec.h_source); + } + + /* Only support matching addresses by the full mask */ + if (is_broadcast_ether_addr(fsp->m_u.ether_spec.h_dest)) { + input->filter.match_flags |= IGB_FILTER_FLAG_DST_MAC_ADDR; + ether_addr_copy(input->filter.dst_addr, + fsp->h_u.ether_spec.h_dest); + } + if ((fsp->flow_type & FLOW_EXT) && fsp->m_ext.vlan_tci) { if (fsp->m_ext.vlan_tci != htons(VLAN_PRIO_MASK)) { err = -EINVAL; -- 2.30.2