From b4970dab6b0c3e13715f4b13de42d72a74c1c9e9 Mon Sep 17 00:00:00 2001 From: Aleksander Jan Bajkowski Date: Tue, 8 Mar 2022 21:20:37 +0100 Subject: [PATCH] lantiq: xrx200: replace patch with upstream version This commit replaces patch number 0703 with the upstream accepted version. This patch requires backporting an additional patch to avoid conflicts. The only significant change is the lower maximum MTU. Packets with lengths over 2400 may be dropped. Signed-off-by: Aleksander Jan Bajkowski --- ...-lantiq-enable-jumbo-frames-on-GSWIP.patch | 101 ------- ..._xrx200-increase-buffer-reservation.patch} | 0 ...q_xrx200-add-ingress-SG-DMA-support.patch} | 0 ...llow-to-use-all-GPHYs-on-xRX300-and-.patch | 275 ++++++++++++++++++ ...-lantiq-enable-jumbo-frames-on-GSWIP.patch | 127 ++++++++ 5 files changed, 402 insertions(+), 101 deletions(-) delete mode 100644 target/linux/lantiq/patches-5.10/0703-net-lantiq-enable-jumbo-frames-on-GSWIP.patch rename target/linux/lantiq/patches-5.10/{0704-v5.16-net-lantiq_xrx200-increase-buffer-reservation.patch => 0703-v5.16-net-lantiq_xrx200-increase-buffer-reservation.patch} (100%) rename target/linux/lantiq/patches-5.10/{0705-v5.17-net-lantiq_xrx200-add-ingress-SG-DMA-support.patch => 0704-v5.17-net-lantiq_xrx200-add-ingress-SG-DMA-support.patch} (100%) create mode 100644 target/linux/lantiq/patches-5.10/0705-v5.13-net-dsa-lantiq-allow-to-use-all-GPHYs-on-xRX300-and-.patch create mode 100644 target/linux/lantiq/patches-5.10/0706-v5.18-net-lantiq-enable-jumbo-frames-on-GSWIP.patch diff --git a/target/linux/lantiq/patches-5.10/0703-net-lantiq-enable-jumbo-frames-on-GSWIP.patch b/target/linux/lantiq/patches-5.10/0703-net-lantiq-enable-jumbo-frames-on-GSWIP.patch deleted file mode 100644 index 6593e43db7..0000000000 --- a/target/linux/lantiq/patches-5.10/0703-net-lantiq-enable-jumbo-frames-on-GSWIP.patch +++ /dev/null @@ -1,101 +0,0 @@ -From 24a43ae2ac0ea06c474b1c80dc75651294d49321 Mon Sep 17 00:00:00 2001 -From: Thomas Nixon -Date: Sat, 2 Oct 2021 00:48:05 +0100 -Subject: [PATCH 2/2] net: lantiq: enable jumbo frames on GSWIP - -This enables non-standard MTUs on a per-port basis, with the overall -frame size set based on the CPU port. - -When the MTU is not changed, this should have no effect. - -Long packets crash the switch with MTUs of greater than 2526, so the -maximum is limited for now. - -Signed-off-by: Thomas Nixon ---- - drivers/net/dsa/lantiq_gswip.c | 46 +++++++++++++++++++++++++++++++--- - 1 file changed, 42 insertions(+), 4 deletions(-) - ---- a/drivers/net/dsa/lantiq_gswip.c -+++ b/drivers/net/dsa/lantiq_gswip.c -@@ -238,6 +238,11 @@ - - #define XRX200_GPHY_FW_ALIGN (16 * 1024) - -+/* maximum packet size supported by the switch; in theory this should be 9600, -+ * but long packets currently cause lock-ups with an MTU of over 2526 -+ */ -+#define GSWIP_MAX_PACKET_LENGTH 2556 -+ - struct gswip_hw_info { - int max_ports; - int cpu_port; -@@ -856,10 +861,6 @@ static int gswip_setup(struct dsa_switch - gswip_switch_mask(priv, 0, GSWIP_PCE_PCTRL_0_INGRESS, - GSWIP_PCE_PCTRL_0p(cpu_port)); - -- gswip_switch_mask(priv, 0, GSWIP_MAC_CTRL_2_MLEN, -- GSWIP_MAC_CTRL_2p(cpu_port)); -- gswip_switch_w(priv, VLAN_ETH_FRAME_LEN + 8 + ETH_FCS_LEN, -- GSWIP_MAC_FLEN); - gswip_switch_mask(priv, 0, GSWIP_BM_QUEUE_GCTRL_GL_MOD, - GSWIP_BM_QUEUE_GCTRL); - -@@ -876,6 +877,8 @@ static int gswip_setup(struct dsa_switch - return err; - } - -+ ds->mtu_enforcement_ingress = true; -+ - gswip_port_enable(ds, cpu_port, NULL); - return 0; - } -@@ -1438,6 +1441,39 @@ static int gswip_port_fdb_dump(struct ds - return 0; - } - -+static int gswip_port_max_mtu(struct dsa_switch *ds, int port) -+{ -+ /* includes 8 bytes for special header */ -+ return GSWIP_MAX_PACKET_LENGTH - VLAN_ETH_HLEN - ETH_FCS_LEN; -+} -+ -+static int gswip_port_change_mtu(struct dsa_switch *ds, int port, int new_mtu) -+{ -+ struct gswip_priv *priv = ds->priv; -+ int cpu_port = priv->hw_info->cpu_port; -+ -+ /* cpu port always has maximum mtu of user ports, so use it to set -+ * switch frame size, including 8 byte special header -+ */ -+ if (port == cpu_port) { -+ new_mtu += 8; -+ gswip_switch_w(priv, VLAN_ETH_HLEN + new_mtu + ETH_FCS_LEN, -+ GSWIP_MAC_FLEN); -+ } -+ -+ /* enable MLEN for ports with non-standard MTUs, including the special -+ * header on the CPU port added above -+ */ -+ if (new_mtu != ETH_DATA_LEN) -+ gswip_switch_mask(priv, 0, GSWIP_MAC_CTRL_2_MLEN, -+ GSWIP_MAC_CTRL_2p(port)); -+ else -+ gswip_switch_mask(priv, GSWIP_MAC_CTRL_2_MLEN, 0, -+ GSWIP_MAC_CTRL_2p(port)); -+ -+ return 0; -+} -+ - static void gswip_phylink_validate(struct dsa_switch *ds, int port, - unsigned long *supported, - struct phylink_link_state *state) -@@ -1781,6 +1817,8 @@ static const struct dsa_switch_ops gswip - .port_fdb_add = gswip_port_fdb_add, - .port_fdb_del = gswip_port_fdb_del, - .port_fdb_dump = gswip_port_fdb_dump, -+ .port_change_mtu = gswip_port_change_mtu, -+ .port_max_mtu = gswip_port_max_mtu, - .phylink_validate = gswip_phylink_validate, - .phylink_mac_config = gswip_phylink_mac_config, - .phylink_mac_link_down = gswip_phylink_mac_link_down, diff --git a/target/linux/lantiq/patches-5.10/0704-v5.16-net-lantiq_xrx200-increase-buffer-reservation.patch b/target/linux/lantiq/patches-5.10/0703-v5.16-net-lantiq_xrx200-increase-buffer-reservation.patch similarity index 100% rename from target/linux/lantiq/patches-5.10/0704-v5.16-net-lantiq_xrx200-increase-buffer-reservation.patch rename to target/linux/lantiq/patches-5.10/0703-v5.16-net-lantiq_xrx200-increase-buffer-reservation.patch diff --git a/target/linux/lantiq/patches-5.10/0705-v5.17-net-lantiq_xrx200-add-ingress-SG-DMA-support.patch b/target/linux/lantiq/patches-5.10/0704-v5.17-net-lantiq_xrx200-add-ingress-SG-DMA-support.patch similarity index 100% rename from target/linux/lantiq/patches-5.10/0705-v5.17-net-lantiq_xrx200-add-ingress-SG-DMA-support.patch rename to target/linux/lantiq/patches-5.10/0704-v5.17-net-lantiq_xrx200-add-ingress-SG-DMA-support.patch diff --git a/target/linux/lantiq/patches-5.10/0705-v5.13-net-dsa-lantiq-allow-to-use-all-GPHYs-on-xRX300-and-.patch b/target/linux/lantiq/patches-5.10/0705-v5.13-net-dsa-lantiq-allow-to-use-all-GPHYs-on-xRX300-and-.patch new file mode 100644 index 0000000000..c0911ef874 --- /dev/null +++ b/target/linux/lantiq/patches-5.10/0705-v5.13-net-dsa-lantiq-allow-to-use-all-GPHYs-on-xRX300-and-.patch @@ -0,0 +1,275 @@ +From a09d042b086202735c4ed64573cdd79933020001 Mon Sep 17 00:00:00 2001 +From: Aleksander Jan Bajkowski +Date: Mon, 22 Mar 2021 21:37:15 +0100 +Subject: [PATCH] net: dsa: lantiq: allow to use all GPHYs on xRX300 and xRX330 + +This patch allows to use all PHYs on GRX300 and GRX330. The ARX300 +has 3 and the GRX330 has 4 integrated PHYs connected to different +ports compared to VRX200. Each integrated PHY can work as single +Gigabit Ethernet PHY (GMII) or as double Fast Ethernet PHY (MII). + +Allowed port configurations: + +xRX200: +GMAC0: RGMII, MII, REVMII or RMII port +GMAC1: RGMII, MII, REVMII or RMII port +GMAC2: GPHY0 (GMII) +GMAC3: GPHY0 (MII) +GMAC4: GPHY1 (GMII) +GMAC5: GPHY1 (MII) or RGMII port + +xRX300: +GMAC0: RGMII port +GMAC1: GPHY2 (GMII) +GMAC2: GPHY0 (GMII) +GMAC3: GPHY0 (MII) +GMAC4: GPHY1 (GMII) +GMAC5: GPHY1 (MII) or RGMII port + +xRX330: +GMAC0: RGMII, GMII or RMII port +GMAC1: GPHY2 (GMII) +GMAC2: GPHY0 (GMII) +GMAC3: GPHY0 (MII) or GPHY3 (GMII) +GMAC4: GPHY1 (GMII) +GMAC5: GPHY1 (MII), RGMII or RMII port + +Tested on D-Link DWR966 (xRX330) with OpenWRT. + +Signed-off-by: Aleksander Jan Bajkowski +Acked-by: Hauke Mehrtens +Signed-off-by: David S. Miller +--- + drivers/net/dsa/lantiq_gswip.c | 142 ++++++++++++++++++++++++++------- + 1 file changed, 113 insertions(+), 29 deletions(-) + +--- a/drivers/net/dsa/lantiq_gswip.c ++++ b/drivers/net/dsa/lantiq_gswip.c +@@ -1,6 +1,6 @@ + // SPDX-License-Identifier: GPL-2.0 + /* +- * Lantiq / Intel GSWIP switch driver for VRX200 SoCs ++ * Lantiq / Intel GSWIP switch driver for VRX200, xRX300 and xRX330 SoCs + * + * Copyright (C) 2010 Lantiq Deutschland + * Copyright (C) 2012 John Crispin +@@ -104,6 +104,7 @@ + #define GSWIP_MII_CFG_MODE_RMIIP 0x2 + #define GSWIP_MII_CFG_MODE_RMIIM 0x3 + #define GSWIP_MII_CFG_MODE_RGMII 0x4 ++#define GSWIP_MII_CFG_MODE_GMII 0x9 + #define GSWIP_MII_CFG_MODE_MASK 0xf + #define GSWIP_MII_CFG_RATE_M2P5 0x00 + #define GSWIP_MII_CFG_RATE_M25 0x10 +@@ -241,6 +242,7 @@ + struct gswip_hw_info { + int max_ports; + int cpu_port; ++ const struct dsa_switch_ops *ops; + }; + + struct xway_gphy_match_data { +@@ -1438,12 +1440,42 @@ static int gswip_port_fdb_dump(struct ds + return 0; + } + +-static void gswip_phylink_validate(struct dsa_switch *ds, int port, +- unsigned long *supported, +- struct phylink_link_state *state) ++static void gswip_phylink_set_capab(unsigned long *supported, ++ struct phylink_link_state *state) + { + __ETHTOOL_DECLARE_LINK_MODE_MASK(mask) = { 0, }; + ++ /* Allow all the expected bits */ ++ phylink_set(mask, Autoneg); ++ phylink_set_port_modes(mask); ++ phylink_set(mask, Pause); ++ phylink_set(mask, Asym_Pause); ++ ++ /* With the exclusion of MII, Reverse MII and Reduced MII, we ++ * support Gigabit, including Half duplex ++ */ ++ if (state->interface != PHY_INTERFACE_MODE_MII && ++ state->interface != PHY_INTERFACE_MODE_REVMII && ++ state->interface != PHY_INTERFACE_MODE_RMII) { ++ phylink_set(mask, 1000baseT_Full); ++ phylink_set(mask, 1000baseT_Half); ++ } ++ ++ phylink_set(mask, 10baseT_Half); ++ phylink_set(mask, 10baseT_Full); ++ phylink_set(mask, 100baseT_Half); ++ phylink_set(mask, 100baseT_Full); ++ ++ bitmap_and(supported, supported, mask, ++ __ETHTOOL_LINK_MODE_MASK_NBITS); ++ bitmap_and(state->advertising, state->advertising, mask, ++ __ETHTOOL_LINK_MODE_MASK_NBITS); ++} ++ ++static void gswip_xrx200_phylink_validate(struct dsa_switch *ds, int port, ++ unsigned long *supported, ++ struct phylink_link_state *state) ++{ + switch (port) { + case 0: + case 1: +@@ -1470,38 +1502,54 @@ static void gswip_phylink_validate(struc + return; + } + +- /* Allow all the expected bits */ +- phylink_set(mask, Autoneg); +- phylink_set_port_modes(mask); +- phylink_set(mask, Pause); +- phylink_set(mask, Asym_Pause); ++ gswip_phylink_set_capab(supported, state); + +- /* With the exclusion of MII, Reverse MII and Reduced MII, we +- * support Gigabit, including Half duplex +- */ +- if (state->interface != PHY_INTERFACE_MODE_MII && +- state->interface != PHY_INTERFACE_MODE_REVMII && +- state->interface != PHY_INTERFACE_MODE_RMII) { +- phylink_set(mask, 1000baseT_Full); +- phylink_set(mask, 1000baseT_Half); ++ return; ++ ++unsupported: ++ bitmap_zero(supported, __ETHTOOL_LINK_MODE_MASK_NBITS); ++ dev_err(ds->dev, "Unsupported interface '%s' for port %d\n", ++ phy_modes(state->interface), port); ++} ++ ++static void gswip_xrx300_phylink_validate(struct dsa_switch *ds, int port, ++ unsigned long *supported, ++ struct phylink_link_state *state) ++{ ++ switch (port) { ++ case 0: ++ if (!phy_interface_mode_is_rgmii(state->interface) && ++ state->interface != PHY_INTERFACE_MODE_GMII && ++ state->interface != PHY_INTERFACE_MODE_RMII) ++ goto unsupported; ++ break; ++ case 1: ++ case 2: ++ case 3: ++ case 4: ++ if (state->interface != PHY_INTERFACE_MODE_INTERNAL) ++ goto unsupported; ++ break; ++ case 5: ++ if (!phy_interface_mode_is_rgmii(state->interface) && ++ state->interface != PHY_INTERFACE_MODE_INTERNAL && ++ state->interface != PHY_INTERFACE_MODE_RMII) ++ goto unsupported; ++ break; ++ default: ++ bitmap_zero(supported, __ETHTOOL_LINK_MODE_MASK_NBITS); ++ dev_err(ds->dev, "Unsupported port: %i\n", port); ++ return; + } + +- phylink_set(mask, 10baseT_Half); +- phylink_set(mask, 10baseT_Full); +- phylink_set(mask, 100baseT_Half); +- phylink_set(mask, 100baseT_Full); ++ gswip_phylink_set_capab(supported, state); + +- bitmap_and(supported, supported, mask, +- __ETHTOOL_LINK_MODE_MASK_NBITS); +- bitmap_and(state->advertising, state->advertising, mask, +- __ETHTOOL_LINK_MODE_MASK_NBITS); + return; + + unsupported: + bitmap_zero(supported, __ETHTOOL_LINK_MODE_MASK_NBITS); + dev_err(ds->dev, "Unsupported interface '%s' for port %d\n", + phy_modes(state->interface), port); +- return; + } + + static void gswip_port_set_link(struct gswip_priv *priv, int port, bool link) +@@ -1639,6 +1687,9 @@ static void gswip_phylink_mac_config(str + case PHY_INTERFACE_MODE_RGMII_TXID: + miicfg |= GSWIP_MII_CFG_MODE_RGMII; + break; ++ case PHY_INTERFACE_MODE_GMII: ++ miicfg |= GSWIP_MII_CFG_MODE_GMII; ++ break; + default: + dev_err(ds->dev, + "Unsupported interface: %d\n", state->interface); +@@ -1765,7 +1816,7 @@ static int gswip_get_sset_count(struct d + return ARRAY_SIZE(gswip_rmon_cnt); + } + +-static const struct dsa_switch_ops gswip_switch_ops = { ++static const struct dsa_switch_ops gswip_xrx200_switch_ops = { + .get_tag_protocol = gswip_get_tag_protocol, + .setup = gswip_setup, + .port_enable = gswip_port_enable, +@@ -1781,7 +1832,31 @@ static const struct dsa_switch_ops gswip + .port_fdb_add = gswip_port_fdb_add, + .port_fdb_del = gswip_port_fdb_del, + .port_fdb_dump = gswip_port_fdb_dump, +- .phylink_validate = gswip_phylink_validate, ++ .phylink_validate = gswip_xrx200_phylink_validate, ++ .phylink_mac_config = gswip_phylink_mac_config, ++ .phylink_mac_link_down = gswip_phylink_mac_link_down, ++ .phylink_mac_link_up = gswip_phylink_mac_link_up, ++ .get_strings = gswip_get_strings, ++ .get_ethtool_stats = gswip_get_ethtool_stats, ++ .get_sset_count = gswip_get_sset_count, ++}; ++ ++static const struct dsa_switch_ops gswip_xrx300_switch_ops = { ++ .get_tag_protocol = gswip_get_tag_protocol, ++ .setup = gswip_setup, ++ .port_enable = gswip_port_enable, ++ .port_disable = gswip_port_disable, ++ .port_bridge_join = gswip_port_bridge_join, ++ .port_bridge_leave = gswip_port_bridge_leave, ++ .port_fast_age = gswip_port_fast_age, ++ .port_vlan_filtering = gswip_port_vlan_filtering, ++ .port_vlan_add = gswip_port_vlan_add, ++ .port_vlan_del = gswip_port_vlan_del, ++ .port_stp_state_set = gswip_port_stp_state_set, ++ .port_fdb_add = gswip_port_fdb_add, ++ .port_fdb_del = gswip_port_fdb_del, ++ .port_fdb_dump = gswip_port_fdb_dump, ++ .phylink_validate = gswip_xrx300_phylink_validate, + .phylink_mac_config = gswip_phylink_mac_config, + .phylink_mac_link_down = gswip_phylink_mac_link_down, + .phylink_mac_link_up = gswip_phylink_mac_link_up, +@@ -2043,7 +2118,7 @@ static int gswip_probe(struct platform_d + priv->ds->dev = dev; + priv->ds->num_ports = priv->hw_info->max_ports; + priv->ds->priv = priv; +- priv->ds->ops = &gswip_switch_ops; ++ priv->ds->ops = priv->hw_info->ops; + priv->dev = dev; + version = gswip_switch_r(priv, GSWIP_VERSION); + +@@ -2127,10 +2202,19 @@ static int gswip_remove(struct platform_ + static const struct gswip_hw_info gswip_xrx200 = { + .max_ports = 7, + .cpu_port = 6, ++ .ops = &gswip_xrx200_switch_ops, ++}; ++ ++static const struct gswip_hw_info gswip_xrx300 = { ++ .max_ports = 7, ++ .cpu_port = 6, ++ .ops = &gswip_xrx300_switch_ops, + }; + + static const struct of_device_id gswip_of_match[] = { + { .compatible = "lantiq,xrx200-gswip", .data = &gswip_xrx200 }, ++ { .compatible = "lantiq,xrx300-gswip", .data = &gswip_xrx300 }, ++ { .compatible = "lantiq,xrx330-gswip", .data = &gswip_xrx300 }, + {}, + }; + MODULE_DEVICE_TABLE(of, gswip_of_match); diff --git a/target/linux/lantiq/patches-5.10/0706-v5.18-net-lantiq-enable-jumbo-frames-on-GSWIP.patch b/target/linux/lantiq/patches-5.10/0706-v5.18-net-lantiq-enable-jumbo-frames-on-GSWIP.patch new file mode 100644 index 0000000000..9d96883910 --- /dev/null +++ b/target/linux/lantiq/patches-5.10/0706-v5.18-net-lantiq-enable-jumbo-frames-on-GSWIP.patch @@ -0,0 +1,127 @@ +From c40bb4fedcd6b8b6a714da5dd466eb88ed2652d1 Mon Sep 17 00:00:00 2001 +From: Aleksander Jan Bajkowski +Date: Wed, 9 Mar 2022 00:04:57 +0100 +Subject: net: dsa: lantiq_gswip: enable jumbo frames on GSWIP + +This enables non-standard MTUs on a per-port basis, with the overall +frame size set based on the CPU port. + +When the MTU is not changed, this should have no effect. + +Long packets crash the switch with MTUs of greater than 2526, so the +maximum is limited for now. Medium packets are sometimes dropped (e.g. +TCP over 2477, UDP over 2516-2519, ICMP over 2526), Hence an MTU value +of 2400 seems safe. + +Signed-off-by: Thomas Nixon +Signed-off-by: Aleksander Jan Bajkowski +Link: https://lore.kernel.org/r/20220308230457.1599237-1-olek2@wp.pl +Signed-off-by: Jakub Kicinski +--- + drivers/net/dsa/lantiq_gswip.c | 53 ++++++++++++++++++++++++++++++++++++++---- + 1 file changed, 49 insertions(+), 4 deletions(-) + +--- a/drivers/net/dsa/lantiq_gswip.c ++++ b/drivers/net/dsa/lantiq_gswip.c +@@ -213,6 +213,7 @@ + #define GSWIP_MAC_CTRL_0_GMII_MII 0x0001 + #define GSWIP_MAC_CTRL_0_GMII_RGMII 0x0002 + #define GSWIP_MAC_CTRL_2p(p) (0x905 + ((p) * 0xC)) ++#define GSWIP_MAC_CTRL_2_LCHKL BIT(2) /* Frame Length Check Long Enable */ + #define GSWIP_MAC_CTRL_2_MLEN BIT(3) /* Maximum Untagged Frame Lnegth */ + + /* Ethernet Switch Fetch DMA Port Control Register */ +@@ -239,6 +240,15 @@ + + #define XRX200_GPHY_FW_ALIGN (16 * 1024) + ++/* Maximum packet size supported by the switch. In theory this should be 10240, ++ * but long packets currently cause lock-ups with an MTU of over 2526. Medium ++ * packets are sometimes dropped (e.g. TCP over 2477, UDP over 2516-2519, ICMP ++ * over 2526), hence an MTU value of 2400 seems safe. This issue only affects ++ * packet reception. This is probably caused by the PPA engine, which is on the ++ * RX part of the device. Packet transmission works properly up to 10240. ++ */ ++#define GSWIP_MAX_PACKET_LENGTH 2400 ++ + struct gswip_hw_info { + int max_ports; + int cpu_port; +@@ -858,10 +868,6 @@ static int gswip_setup(struct dsa_switch + gswip_switch_mask(priv, 0, GSWIP_PCE_PCTRL_0_INGRESS, + GSWIP_PCE_PCTRL_0p(cpu_port)); + +- gswip_switch_mask(priv, 0, GSWIP_MAC_CTRL_2_MLEN, +- GSWIP_MAC_CTRL_2p(cpu_port)); +- gswip_switch_w(priv, VLAN_ETH_FRAME_LEN + 8 + ETH_FCS_LEN, +- GSWIP_MAC_FLEN); + gswip_switch_mask(priv, 0, GSWIP_BM_QUEUE_GCTRL_GL_MOD, + GSWIP_BM_QUEUE_GCTRL); + +@@ -878,6 +884,8 @@ static int gswip_setup(struct dsa_switch + return err; + } + ++ ds->mtu_enforcement_ingress = true; ++ + gswip_port_enable(ds, cpu_port, NULL); + return 0; + } +@@ -1472,6 +1480,39 @@ static void gswip_phylink_set_capab(unsi + __ETHTOOL_LINK_MODE_MASK_NBITS); + } + ++static int gswip_port_max_mtu(struct dsa_switch *ds, int port) ++{ ++ /* Includes 8 bytes for special header. */ ++ return GSWIP_MAX_PACKET_LENGTH - VLAN_ETH_HLEN - ETH_FCS_LEN; ++} ++ ++static int gswip_port_change_mtu(struct dsa_switch *ds, int port, int new_mtu) ++{ ++ struct gswip_priv *priv = ds->priv; ++ int cpu_port = priv->hw_info->cpu_port; ++ ++ /* CPU port always has maximum mtu of user ports, so use it to set ++ * switch frame size, including 8 byte special header. ++ */ ++ if (port == cpu_port) { ++ new_mtu += 8; ++ gswip_switch_w(priv, VLAN_ETH_HLEN + new_mtu + ETH_FCS_LEN, ++ GSWIP_MAC_FLEN); ++ } ++ ++ /* Enable MLEN for ports with non-standard MTUs, including the special ++ * header on the CPU port added above. ++ */ ++ if (new_mtu != ETH_DATA_LEN) ++ gswip_switch_mask(priv, 0, GSWIP_MAC_CTRL_2_MLEN, ++ GSWIP_MAC_CTRL_2p(port)); ++ else ++ gswip_switch_mask(priv, GSWIP_MAC_CTRL_2_MLEN, 0, ++ GSWIP_MAC_CTRL_2p(port)); ++ ++ return 0; ++} ++ + static void gswip_xrx200_phylink_validate(struct dsa_switch *ds, int port, + unsigned long *supported, + struct phylink_link_state *state) +@@ -1832,6 +1873,8 @@ static const struct dsa_switch_ops gswip + .port_fdb_add = gswip_port_fdb_add, + .port_fdb_del = gswip_port_fdb_del, + .port_fdb_dump = gswip_port_fdb_dump, ++ .port_change_mtu = gswip_port_change_mtu, ++ .port_max_mtu = gswip_port_max_mtu, + .phylink_validate = gswip_xrx200_phylink_validate, + .phylink_mac_config = gswip_phylink_mac_config, + .phylink_mac_link_down = gswip_phylink_mac_link_down, +@@ -1856,6 +1899,8 @@ static const struct dsa_switch_ops gswip + .port_fdb_add = gswip_port_fdb_add, + .port_fdb_del = gswip_port_fdb_del, + .port_fdb_dump = gswip_port_fdb_dump, ++ .port_change_mtu = gswip_port_change_mtu, ++ .port_max_mtu = gswip_port_max_mtu, + .phylink_validate = gswip_xrx300_phylink_validate, + .phylink_mac_config = gswip_phylink_mac_config, + .phylink_mac_link_down = gswip_phylink_mac_link_down, -- 2.30.2