From b3ede3317038abdd75c88f20d9b9685ab062b48a Mon Sep 17 00:00:00 2001 From: Christophe Leroy Date: Fri, 16 Mar 2018 17:20:51 +0100 Subject: [PATCH] board: MCR3000: cleanup config Some config is redundant with Kconfig. Fix it. Also remove unused configs Move SDRAM_MAX_SIZE in the only place it is used include/environment.h already defines CONFIG_ENV_SIZE from CONFIG_ENV_SECT_SIZE and defines CONFIG_ENV_ADDR as (CONFIG_SYS_FLASH_BASE + CONFIG_ENV_OFFSET) remove BOOTARGS as bootargs is set by the different boot commands Fix CONFIG_SYS_INIT_RAM_ADDR and CONFIG_SYS_INIT_RAM_SIZE to be in line with CPM DPRAM organisation Remove CONFIG_SYS_GBL_DATA_SIZE, CONFIG_SYS_GBL_DATA_OFFSET and CONFIG_SYS_INIT_SP_OFFSET which are unused Signed-off-by: Christophe Leroy --- arch/powerpc/Kconfig | 1 + board/cssi/MCR3000/MCR3000.c | 2 ++ configs/MCR3000_defconfig | 4 ++-- include/configs/MCR3000.h | 34 +++------------------------------- 4 files changed, 8 insertions(+), 33 deletions(-) diff --git a/arch/powerpc/Kconfig b/arch/powerpc/Kconfig index f29465f2c0..77c0333030 100644 --- a/arch/powerpc/Kconfig +++ b/arch/powerpc/Kconfig @@ -32,6 +32,7 @@ config MPC86xx config MPC8xx bool "MPC8xx" + select BOARD_EARLY_INIT_F imply CMD_REGINFO endchoice diff --git a/board/cssi/MCR3000/MCR3000.c b/board/cssi/MCR3000/MCR3000.c index c928881804..6939a2cf61 100644 --- a/board/cssi/MCR3000/MCR3000.c +++ b/board/cssi/MCR3000/MCR3000.c @@ -16,6 +16,8 @@ DECLARE_GLOBAL_DATA_PTR; +#define SDRAM_MAX_SIZE (32 * 1024 * 1024) + static const uint cs1_dram_table_66[] = { /* DRAM - single read. (offset 0 in upm RAM) */ 0x0F3DFC04, 0x0FEFBC04, 0x00BE7804, 0x0FFDF400, diff --git a/configs/MCR3000_defconfig b/configs/MCR3000_defconfig index bce4d0e74c..df8ac06487 100644 --- a/configs/MCR3000_defconfig +++ b/configs/MCR3000_defconfig @@ -39,8 +39,6 @@ CONFIG_SYS_OR7_PRELIM=0xFFFF810A CONFIG_SYS_IMMR=0xFF000000 CONFIG_OF_BOARD_SETUP=y CONFIG_BOOTDELAY=5 -CONFIG_USE_BOOTARGS=y -CONFIG_BOOTARGS="ubi.mtd=4 root=ubi0:rootfs rw rootfstype=ubifs rootflags=sync console=ttyCPM0,115200N8 ip=${ipaddr}:::${netmask}:mcr3k:eth0:off" CONFIG_HUSH_PARSER=y # CONFIG_AUTO_COMPLETE is not set CONFIG_SYS_PROMPT="S3K> " @@ -71,3 +69,5 @@ CONFIG_MPC8XX_FEC=y CONFIG_SHA256=y CONFIG_LZMA=y CONFIG_OF_LIBFDT=y +CONFIG_USE_BOOTCOMMAND=y +CONFIG_BOOTCOMMAND="run flashboot" diff --git a/include/configs/MCR3000.h b/include/configs/MCR3000.h index 6b03873ce8..7e9fe3800d 100644 --- a/include/configs/MCR3000.h +++ b/include/configs/MCR3000.h @@ -9,7 +9,6 @@ #define __CONFIG_H /* High Level Configuration Options */ -#define CONFIG_BOARD_EARLY_INIT_F 1 /* Call board_early_init_f */ #define CONFIG_MISC_INIT_R 1 /* Call misc_init_r */ #define CONFIG_EXTRA_ENV_SETTINGS \ @@ -55,25 +54,16 @@ "${ofl_args}; " \ "bootm ${loadaddr} - 0xf00000\0" -#define CONFIG_BOOTDELAY 5 - #define CONFIG_IPADDR 192.168.0.3 #define CONFIG_SERVERIP 192.168.0.1 #define CONFIG_NETMASK 255.0.0.0 -#define CONFIG_BOOTCOMMAND "run flashboot" - #define CONFIG_LOADS_ECHO 1 /* echo on for serial download */ -#undef CONFIG_LOADS_BAUD_CHANGE /* don't allow baudrate change */ #define CONFIG_WATCHDOG 1 /* watchdog enabled */ /* Miscellaneous configurable options */ -#ifdef CONFIG_HUSH_PARSER -#define CONFIG_SYS_PROMPT_HUSH_PS2 "S3K> " -#endif - #define CONFIG_SYS_MEMTEST_START 0x00002000 #define CONFIG_SYS_MEMTEST_END 0x00800000 @@ -82,16 +72,11 @@ #define CONFIG_SYS_HZ 1000 /* Definitions for initial stack pointer and data area (in DPRAM) */ -#define CONFIG_SYS_INIT_RAM_ADDR CONFIG_SYS_IMMR -#define CONFIG_SYS_INIT_RAM_SIZE 0x2f00 -#define CONFIG_SYS_GBL_DATA_SIZE 64 -#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - \ - CONFIG_SYS_GBL_DATA_SIZE) -#define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET +#define CONFIG_SYS_INIT_RAM_ADDR (CONFIG_SYS_IMMR + 0x2800) +#define CONFIG_SYS_INIT_RAM_SIZE (0x2e00 - 0x2800) /* RAM configuration (note that CONFIG_SYS_SDRAM_BASE must be zero) */ #define CONFIG_SYS_SDRAM_BASE 0x00000000 -#define SDRAM_MAX_SIZE (32 * 1024 * 1024) /* FLASH organization */ #define CONFIG_SYS_FLASH_BASE CONFIG_SYS_TEXT_BASE @@ -116,29 +101,16 @@ /* environment is in FLASH */ #define CONFIG_ENV_SECT_SIZE (64 * 1024) -#define CONFIG_ENV_SIZE CONFIG_ENV_SECT_SIZE -#define CONFIG_ENV_ADDR (CONFIG_SYS_FLASH_BASE + CONFIG_SYS_MONITOR_LEN) -#define CONFIG_ENV_OFFSET (CONFIG_ENV_ADDR - CONFIG_SYS_FLASH_BASE) +#define CONFIG_ENV_OFFSET CONFIG_SYS_MONITOR_LEN #define CONFIG_ENV_OVERWRITE 1 -/* Cache Configuration */ -#define CONFIG_SYS_CACHELINE_SIZE 16 - /* Ethernet configuration part */ #define CONFIG_SYS_DISCOVER_PHY 1 -#ifdef CONFIG_MPC8XX_FEC #define CONFIG_MII_INIT 1 -#endif /* NAND configuration part */ #define CONFIG_SYS_MAX_NAND_DEVICE 1 #define CONFIG_SYS_NAND_MAX_CHIPS 1 #define CONFIG_SYS_NAND_BASE 0x0C000000 -/* Internal Definitions */ - -/* Boot Flags*/ -#define BOOTFLAG_COLD 0x01 -#define BOOTFLAG_WARM 0x02 - #endif /* __CONFIG_H */ -- 2.30.2