From b1f492ca9e0c090209824ff36456d4f131843190 Mon Sep 17 00:00:00 2001 From: Sjoerd Simons Date: Sat, 3 Oct 2015 13:25:01 +0200 Subject: [PATCH] rockchip: Reconfigure the malloc based to point to system memory When malloc_base initially gets setup in the SPL it is based on the current (early) stack pointer, which for rockchip is pointing into SRAM. This means simple memory allocations happen in SRAM space, which is somewhat unfortunate. Specifically a bounce buffer for the mmc allocated in SRAM space seems to cause the mmc engine to stall/fail causing timeouts and a failure to load the main u-boot image. To resolve this, reconfigure the malloc_base to start at the relocated stack pointer after DRAM has been setup. For reference, things did work fine on rockchip before 596380db was merged to fix memalign_simple due to a combination of rockchip SDRAM starting at address 0 and the dw_mmc driver not checking errors from bounce_buffer_start. As a result, when a bounce buffer needed to be allocated mem_align simple would fail and return NULL. The mmc driver ignored the error and happily continued with the bounce buffer address being set to 0, which just happened to work fine.. Signed-off-by: Sjoerd Simons Reviewed-by: Hans de Goede Acked-by: Simon Glass --- arch/arm/mach-rockchip/board-spl.c | 7 +++++++ 1 file changed, 7 insertions(+) diff --git a/arch/arm/mach-rockchip/board-spl.c b/arch/arm/mach-rockchip/board-spl.c index a241d965b9..28c3949b75 100644 --- a/arch/arm/mach-rockchip/board-spl.c +++ b/arch/arm/mach-rockchip/board-spl.c @@ -217,6 +217,13 @@ void board_init_f(ulong dummy) debug("DRAM init failed: %d\n", ret); return; } + + /* + * Now that DRAM is initialized setup base pointer for simple malloc + * into RAM. + */ + gd->malloc_base = CONFIG_SPL_STACK_R_ADDR; + gd->malloc_ptr = 0; } static int setup_led(void) -- 2.30.2