From b19bce0335e25b9069ddb10d234e673bbd46d2f4 Mon Sep 17 00:00:00 2001 From: Heiner Kallweit Date: Wed, 9 Jan 2019 08:20:28 +0100 Subject: [PATCH] net: ethernet: mediatek: fix warning in phy_start_aneg linux 5.0-rc1 shows following warning on bpi-r2/mt7623 bootup: [ 5.170597] WARNING: CPU: 3 PID: 1 at drivers/net/phy/phy.c:548 phy_start_aneg+0x110/0x144 [ 5.178826] called from state READY .... [ 5.264111] [] (phy_start_aneg) from [] (mtk_init+0x414/0x47c) [ 5.271630] r7:df5f5eec r6:c0f08c48 r5:00000000 r4:dea67800 [ 5.277256] [] (mtk_init) from [] (register_netdevice+0x98/0x51c) [ 5.285035] r8:00000000 r7:00000000 r6:c0f97080 r5:c0f08c48 r4:dea67800 [ 5.291693] [] (register_netdevice) from [] (register_netdev+0x2c/0x44) [ 5.299989] r8:00000000 r7:dea2e608 r6:deacea00 r5:dea2e604 r4:dea67800 [ 5.306646] [] (register_netdev) from [] (mtk_probe+0x668/0x7ac) [ 5.314336] r5:dea2e604 r4:dea2e040 [ 5.317890] [] (mtk_probe) from [] (platform_drv_probe+0x58/0xa8) [ 5.325670] r10:c0f86bac r9:00000000 r8:c0fbe578 r7:00000000 r6:c0f86bac r5:00000000 [ 5.333445] r4:deacea10 [ 5.335963] [] (platform_drv_probe) from [] (really_probe+0x2d8/0x424) maybe other boards using this generic driver are affected v2: optimization: - phy_set_max_speed() is only needed if you want to reduce the max speed, typically if the PHY supports 1Gbps but the MAC supports 100Mbps only. - The pause parameters are autonegotiated. Except you have a specific need you normally don't need to manually fiddle with this. - phy_start_aneg() is called implicitly by the phylib state machine, you shouldn't call it manually except you have a good excuse. - netif_carrier_on/netif_carrier_off in mtk_phy_link_adjust() isn't needed. It's done by phy_link_change() in phylib. Signed-off-by: Frank Wunderlich Reviewed-by: Heiner Kallweit Acked-by: Sean Wang Signed-off-by: David S. Miller --- drivers/net/ethernet/mediatek/mtk_eth_soc.c | 16 ---------------- 1 file changed, 16 deletions(-) diff --git a/drivers/net/ethernet/mediatek/mtk_eth_soc.c b/drivers/net/ethernet/mediatek/mtk_eth_soc.c index 399f565dd85a..2968d29a992f 100644 --- a/drivers/net/ethernet/mediatek/mtk_eth_soc.c +++ b/drivers/net/ethernet/mediatek/mtk_eth_soc.c @@ -258,11 +258,6 @@ static void mtk_phy_link_adjust(struct net_device *dev) mtk_w32(mac->hw, mcr, MTK_MAC_MCR(mac->id)); - if (dev->phydev->link) - netif_carrier_on(dev); - else - netif_carrier_off(dev); - if (!of_phy_is_fixed_link(mac->of_node)) phy_print_status(dev->phydev); } @@ -347,17 +342,6 @@ static int mtk_phy_connect(struct net_device *dev) if (mtk_phy_connect_node(eth, mac, np)) goto err_phy; - dev->phydev->autoneg = AUTONEG_ENABLE; - dev->phydev->speed = 0; - dev->phydev->duplex = 0; - - phy_set_max_speed(dev->phydev, SPEED_1000); - phy_support_asym_pause(dev->phydev); - linkmode_copy(dev->phydev->advertising, dev->phydev->supported); - linkmode_set_bit(ETHTOOL_LINK_MODE_Autoneg_BIT, - dev->phydev->advertising); - phy_start_aneg(dev->phydev); - of_node_put(np); return 0; -- 2.30.2