From b19581a94fb1c49afc0339a65f1ebd0e4ff80dcd Mon Sep 17 00:00:00 2001 From: Shuah Khan Date: Thu, 11 Feb 2016 21:41:37 -0200 Subject: [PATCH] [media] media: au0828 video change to use v4l_enable_media_source() Change au0828 to check if tuner is free or not before changing tuner configuration. vidioc_g_tuner(), and au0828_v4l2_close() now call v4l-core interface v4l_enable_media_source() before changing tuner configuration. Remove au0828_enable_analog_tuner() as it is no longer needed because v4l2-core implements common interfaces to check for media source availability. In addition, queue_setup() no longer needs the tuner availability check since v4l2-core does it. Signed-off-by: Shuah Khan Signed-off-by: Mauro Carvalho Chehab --- drivers/media/usb/au0828/au0828-video.c | 102 +++++++++--------------- 1 file changed, 39 insertions(+), 63 deletions(-) diff --git a/drivers/media/usb/au0828/au0828-video.c b/drivers/media/usb/au0828/au0828-video.c index 25e27c86e9ca..1958de192608 100644 --- a/drivers/media/usb/au0828/au0828-video.c +++ b/drivers/media/usb/au0828/au0828-video.c @@ -796,64 +796,6 @@ int au0828_v4l2_device_register(struct usb_interface *interface, return 0; } -static int au0828_enable_analog_tuner(struct au0828_dev *dev) -{ -#ifdef CONFIG_MEDIA_CONTROLLER - struct media_device *mdev = dev->media_dev; - struct media_entity *source; - struct media_link *link, *found_link = NULL; - int ret, active_links = 0; - - if (!mdev || !dev->decoder) - return 0; - - /* - * This will find the tuner that is connected into the decoder. - * Technically, this is not 100% correct, as the device may be - * using an analog input instead of the tuner. However, as we can't - * do DVB streaming while the DMA engine is being used for V4L2, - * this should be enough for the actual needs. - */ - list_for_each_entry(link, &dev->decoder->links, list) { - if (link->sink->entity == dev->decoder) { - found_link = link; - if (link->flags & MEDIA_LNK_FL_ENABLED) - active_links++; - break; - } - } - - if (active_links == 1 || !found_link) - return 0; - - source = found_link->source->entity; - list_for_each_entry(link, &source->links, list) { - struct media_entity *sink; - int flags = 0; - - sink = link->sink->entity; - - if (sink == dev->decoder) - flags = MEDIA_LNK_FL_ENABLED; - - ret = media_entity_setup_link(link, flags); - if (ret) { - pr_err( - "Couldn't change link %s->%s to %s. Error %d\n", - source->name, sink->name, - flags ? "enabled" : "disabled", - ret); - return ret; - } else - au0828_isocdbg( - "link %s->%s was %s\n", - source->name, sink->name, - flags ? "ENABLED" : "disabled"); - } -#endif - return 0; -} - static int queue_setup(struct vb2_queue *vq, unsigned int *nbuffers, unsigned int *nplanes, unsigned int sizes[], void *alloc_ctxs[]) @@ -865,9 +807,6 @@ static int queue_setup(struct vb2_queue *vq, return sizes[0] < size ? -EINVAL : 0; *nplanes = 1; sizes[0] = size; - - au0828_enable_analog_tuner(dev); - return 0; } @@ -1235,8 +1174,39 @@ static int au0828_v4l2_close(struct file *filp) goto end; if (dev->users == 1) { - /* Save some power by putting tuner to sleep */ - v4l2_device_call_all(&dev->v4l2_dev, 0, core, s_power, 0); + /* + * Avoid putting tuner in sleep if DVB or ALSA are + * streaming. + * + * On most USB devices like au0828 the tuner can + * be safely put in sleep stare here if ALSA isn't + * streaming. Exceptions are some very old USB tuner + * models such as em28xx-based WinTV USB2 which have + * a separate audio output jack. The devices that have + * a separate audio output jack have analog tuners, + * like Philips FM1236. Those devices are always on, + * so the s_power callback are silently ignored. + * So, the current logic here does the following: + * Disable (put tuner to sleep) when + * - ALSA and DVB aren't not streaming; + * - the last V4L2 file handler is closed. + * + * FIXME: + * + * Additionally, this logic could be improved to + * disable the media source if the above conditions + * are met and if the device: + * - doesn't have a separate audio out plug (or + * - doesn't use a silicon tuner like xc2028/3028/4000/5000). + * + * Once this additional logic is in place, a callback + * is needed to enable the media source and power on + * the tuner, for radio to work. + */ + ret = v4l_enable_media_source(vdev); + if (ret == 0) + v4l2_device_call_all(&dev->v4l2_dev, 0, core, + s_power, 0); dev->std_set_in_tuner_core = 0; /* When close the device, set the usb intf0 into alt0 to free @@ -1636,10 +1606,16 @@ static int vidioc_s_audio(struct file *file, void *priv, const struct v4l2_audio static int vidioc_g_tuner(struct file *file, void *priv, struct v4l2_tuner *t) { struct au0828_dev *dev = video_drvdata(file); + struct video_device *vfd = video_devdata(file); + int ret; if (t->index != 0) return -EINVAL; + ret = v4l_enable_media_source(vfd); + if (ret) + return ret; + dprintk(1, "%s called std_set %d dev_state %d\n", __func__, dev->std_set_in_tuner_core, dev->dev_state); -- 2.30.2