From b0854eca8118e16ed92753315d7462c4b3bb256d Mon Sep 17 00:00:00 2001 From: John Crispin Date: Tue, 7 Jul 2015 13:43:47 +0000 Subject: [PATCH] lantiq: Add support for linux 4.1 All (still relevant) patches were refresh. The following patches were dropped because they are applied upstream: - 0003-MIPS-lantiq-handle-vmmc-memory-reservation.patch - 0005-MIPS-lantiq-add-reset-controller-api-support.patch - 0006-MIPS-lantiq-reboot-gphy-on-restart.patch - 0009-MIPS-lantiq-command-line-work-around.patch - 0010-MIPS-lantiq-export-soc-type.patch - 0011-lantiq-add-support-for-xrx200-firmware-depending-on-.patch - 0037-MIPS-lantiq-move-eiu-init-after-irq_domain-register.patch Signed-off-by: Martin Blumenstingl SVN-Revision: 46216 --- target/linux/lantiq/config-4.1 | 163 + .../0001-MIPS-lantiq-add-pcie-driver.patch | 5540 +++++++++++++++++ .../0002-MIPS-lantiq-dtb-image-hack.patch | 31 + .../0004-MIPS-lantiq-add-atm-hack.patch | 500 ++ ...07-MIPS-lantiq-add-basic-tffs-driver.patch | 111 + ...-MIPS-lantiq-backport-old-timer-code.patch | 1028 +++ .../0012-pinctrl-lantiq-fix-up-pinmux.patch | 79 + ...MTD-lantiq-xway-fix-invalid-operator.patch | 24 + ...the-latched-command-should-be-persis.patch | 44 + ...-MTD-lantiq-xway-remove-endless-loop.patch | 41 + ...add-missing-write_buf-and-read_buf-t.patch | 55 + .../0017-MTD-xway-fix-nand-locking.patch | 89 + .../0018-MTD-nand-lots-of-xrx200-fixes.patch | 125 + ...antiq-handle-NO_XIP-on-cfi0001-flash.patch | 25 + ...25p80-allow-loading-mtd-name-from-OF.patch | 44 + ...ET-PHY-adds-driver-for-lantiq-PHY11G.patch | 271 + ...ET-lantiq-adds-PHY11G-firmware-blobs.patch | 364 ++ ...0025-NET-MIPS-lantiq-adds-xrx200-net.patch | 3339 ++++++++++ .../0026-NET-multi-phy-support.patch | 53 + .../0028-NET-lantiq-various-etop-fixes.patch | 907 +++ .../0030-GPIO-add-named-gpio-exports.patch | 166 + ...PS-lantiq-add-FALC-ON-i2c-bus-master.patch | 1034 +++ .../0032-USB-fix-roothub-for-IFXHCD.patch | 31 + .../0033-SPI-MIPS-lantiq-adds-spi-xway.patch | 1020 +++ ...e-when-reset-RESET_CONTROLLER-is-not.patch | 45 + ...iq-wifi-and-ethernet-eeprom-handling.patch | 614 ++ .../0036-owrt-generic-dtb-image-hack.patch | 32 + .../0038-MIPS-lantiq-fpi-on-ar9.patch | 21 + ...9-MIPS-lantiq-initialize-usb-on-boot.patch | 96 + .../0040-USB-DWC2-enable-usb-power-gpio.patch | 35 + .../0041-USB-DWC2-add-ltq-params.patch | 45 + .../0042-USB-DWC2-big-endian-support.patch | 3156 ++++++++++ .../0043-gpio-stp-xway-fix-phy-mask.patch | 23 + ...0100-lantiq-xrx200-enable-remove-crc.patch | 25 + .../lantiq/patches-4.1/0101-mtd-split.patch | 192 + .../0150-lantiq-pinctrl-xway.patch | 15 + .../0151-lantiq-ifxmips_pcie-use-of.patch | 51 + .../0160-owrt-lantiq-multiple-flash.patch | 217 + ...-cmdset-0001-disable-buffered-writes.patch | 11 + 39 files changed, 19662 insertions(+) create mode 100644 target/linux/lantiq/config-4.1 create mode 100644 target/linux/lantiq/patches-4.1/0001-MIPS-lantiq-add-pcie-driver.patch create mode 100644 target/linux/lantiq/patches-4.1/0002-MIPS-lantiq-dtb-image-hack.patch create mode 100644 target/linux/lantiq/patches-4.1/0004-MIPS-lantiq-add-atm-hack.patch create mode 100644 target/linux/lantiq/patches-4.1/0007-MIPS-lantiq-add-basic-tffs-driver.patch create mode 100644 target/linux/lantiq/patches-4.1/0008-MIPS-lantiq-backport-old-timer-code.patch create mode 100644 target/linux/lantiq/patches-4.1/0012-pinctrl-lantiq-fix-up-pinmux.patch create mode 100644 target/linux/lantiq/patches-4.1/0013-MTD-lantiq-xway-fix-invalid-operator.patch create mode 100644 target/linux/lantiq/patches-4.1/0014-MTD-lantiq-xway-the-latched-command-should-be-persis.patch create mode 100644 target/linux/lantiq/patches-4.1/0015-MTD-lantiq-xway-remove-endless-loop.patch create mode 100644 target/linux/lantiq/patches-4.1/0016-MTD-lantiq-xway-add-missing-write_buf-and-read_buf-t.patch create mode 100644 target/linux/lantiq/patches-4.1/0017-MTD-xway-fix-nand-locking.patch create mode 100644 target/linux/lantiq/patches-4.1/0018-MTD-nand-lots-of-xrx200-fixes.patch create mode 100644 target/linux/lantiq/patches-4.1/0020-MTD-lantiq-handle-NO_XIP-on-cfi0001-flash.patch create mode 100644 target/linux/lantiq/patches-4.1/0022-MTD-m25p80-allow-loading-mtd-name-from-OF.patch create mode 100644 target/linux/lantiq/patches-4.1/0023-NET-PHY-adds-driver-for-lantiq-PHY11G.patch create mode 100644 target/linux/lantiq/patches-4.1/0024-NET-lantiq-adds-PHY11G-firmware-blobs.patch create mode 100644 target/linux/lantiq/patches-4.1/0025-NET-MIPS-lantiq-adds-xrx200-net.patch create mode 100644 target/linux/lantiq/patches-4.1/0026-NET-multi-phy-support.patch create mode 100644 target/linux/lantiq/patches-4.1/0028-NET-lantiq-various-etop-fixes.patch create mode 100644 target/linux/lantiq/patches-4.1/0030-GPIO-add-named-gpio-exports.patch create mode 100644 target/linux/lantiq/patches-4.1/0031-I2C-MIPS-lantiq-add-FALC-ON-i2c-bus-master.patch create mode 100644 target/linux/lantiq/patches-4.1/0032-USB-fix-roothub-for-IFXHCD.patch create mode 100644 target/linux/lantiq/patches-4.1/0033-SPI-MIPS-lantiq-adds-spi-xway.patch create mode 100644 target/linux/lantiq/patches-4.1/0034-reset-Fix-compile-when-reset-RESET_CONTROLLER-is-not.patch create mode 100644 target/linux/lantiq/patches-4.1/0035-owrt-lantiq-wifi-and-ethernet-eeprom-handling.patch create mode 100644 target/linux/lantiq/patches-4.1/0036-owrt-generic-dtb-image-hack.patch create mode 100644 target/linux/lantiq/patches-4.1/0038-MIPS-lantiq-fpi-on-ar9.patch create mode 100644 target/linux/lantiq/patches-4.1/0039-MIPS-lantiq-initialize-usb-on-boot.patch create mode 100644 target/linux/lantiq/patches-4.1/0040-USB-DWC2-enable-usb-power-gpio.patch create mode 100644 target/linux/lantiq/patches-4.1/0041-USB-DWC2-add-ltq-params.patch create mode 100644 target/linux/lantiq/patches-4.1/0042-USB-DWC2-big-endian-support.patch create mode 100644 target/linux/lantiq/patches-4.1/0043-gpio-stp-xway-fix-phy-mask.patch create mode 100644 target/linux/lantiq/patches-4.1/0100-lantiq-xrx200-enable-remove-crc.patch create mode 100644 target/linux/lantiq/patches-4.1/0101-mtd-split.patch create mode 100644 target/linux/lantiq/patches-4.1/0150-lantiq-pinctrl-xway.patch create mode 100644 target/linux/lantiq/patches-4.1/0151-lantiq-ifxmips_pcie-use-of.patch create mode 100644 target/linux/lantiq/patches-4.1/0160-owrt-lantiq-multiple-flash.patch create mode 100644 target/linux/lantiq/patches-4.1/0300-MTD-cfi-cmdset-0001-disable-buffered-writes.patch diff --git a/target/linux/lantiq/config-4.1 b/target/linux/lantiq/config-4.1 new file mode 100644 index 0000000000..7169c62f98 --- /dev/null +++ b/target/linux/lantiq/config-4.1 @@ -0,0 +1,163 @@ +CONFIG_ARCH_BINFMT_ELF_RANDOMIZE_PIE=y +CONFIG_ARCH_DISCARD_MEMBLOCK=y +CONFIG_ARCH_HAS_ATOMIC64_DEC_IF_POSITIVE=y +CONFIG_ARCH_HAVE_CUSTOM_GPIO_H=y +CONFIG_ARCH_HIBERNATION_POSSIBLE=y +CONFIG_ARCH_REQUIRE_GPIOLIB=y +CONFIG_ARCH_SUPPORTS_MSI=y +CONFIG_ARCH_SUSPEND_POSSIBLE=y +CONFIG_ARCH_WANT_IPC_PARSE_VERSION=y +CONFIG_CEVT_R4K=y +CONFIG_CLKDEV_LOOKUP=y +CONFIG_CPU_BIG_ENDIAN=y +CONFIG_CPU_GENERIC_DUMP_TLB=y +CONFIG_CPU_HAS_PREFETCH=y +CONFIG_CPU_HAS_SYNC=y +CONFIG_CPU_MIPS32=y +# CONFIG_CPU_MIPS32_R1 is not set +CONFIG_CPU_MIPS32_R2=y +CONFIG_CPU_MIPSR2=y +CONFIG_CPU_R4K_CACHE_TLB=y +CONFIG_CPU_R4K_FPU=y +CONFIG_CPU_SUPPORTS_32BIT_KERNEL=y +CONFIG_CPU_SUPPORTS_HIGHMEM=y +CONFIG_CRYPTO_HASH=y +CONFIG_CRYPTO_HASH2=y +CONFIG_CSRC_R4K=y +CONFIG_DECOMPRESS_LZMA=y +CONFIG_DMA_NONCOHERENT=y +CONFIG_DTC=y +CONFIG_DT_EASY50712=y +CONFIG_EARLY_PRINTK=y +CONFIG_ETHERNET_PACKET_MANGLE=y +CONFIG_GENERIC_ATOMIC64=y +CONFIG_GENERIC_CLOCKEVENTS=y +CONFIG_GENERIC_CLOCKEVENTS_BUILD=y +CONFIG_GENERIC_CMOS_UPDATE=y +CONFIG_GENERIC_GPIO=y +CONFIG_GENERIC_IO=y +CONFIG_GENERIC_IRQ_SHOW=y +CONFIG_GENERIC_PCI_IOMAP=y +CONFIG_GENERIC_SMP_IDLE_THREAD=y +CONFIG_GPIOLIB=y +CONFIG_GPIO_MM_LANTIQ=y +CONFIG_GPIO_STP_XWAY=y +CONFIG_GPIO_SYSFS=y +CONFIG_HARDWARE_WATCHPOINTS=y +CONFIG_HAS_DMA=y +CONFIG_HAS_IOMEM=y +CONFIG_HAS_IOPORT=y +CONFIG_HAVE_ARCH_JUMP_LABEL=y +CONFIG_HAVE_ARCH_KGDB=y +CONFIG_HAVE_ARCH_TRANSPARENT_HUGEPAGE=y +CONFIG_HAVE_CLK=y +CONFIG_HAVE_C_RECORDMCOUNT=y +CONFIG_HAVE_DEBUG_KMEMLEAK=y +CONFIG_HAVE_DMA_API_DEBUG=y +CONFIG_HAVE_DMA_ATTRS=y +CONFIG_HAVE_DYNAMIC_FTRACE=y +CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y +CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y +CONFIG_HAVE_FUNCTION_TRACER=y +CONFIG_HAVE_FUNCTION_TRACE_MCOUNT_TEST=y +CONFIG_HAVE_GENERIC_DMA_COHERENT=y +CONFIG_HAVE_GENERIC_HARDIRQS=y +CONFIG_HAVE_IDE=y +CONFIG_HAVE_KVM=y +CONFIG_HAVE_MACH_CLKDEV=y +CONFIG_HAVE_MEMBLOCK=y +CONFIG_HAVE_MEMBLOCK_NODE_MAP=y +CONFIG_HAVE_MOD_ARCH_SPECIFIC=y +CONFIG_HAVE_NET_DSA=y +CONFIG_HAVE_OPROFILE=y +CONFIG_HAVE_PERF_EVENTS=y +CONFIG_HW_HAS_PCI=y +CONFIG_HW_RANDOM=y +CONFIG_HZ=250 +# CONFIG_HZ_100 is not set +CONFIG_HZ_250=y +CONFIG_INITRAMFS_SOURCE="" +CONFIG_IRQ_CPU=y +CONFIG_IRQ_DOMAIN=y +CONFIG_IRQ_FORCED_THREADING=y +CONFIG_LANTIQ=y +CONFIG_LANTIQ_ETOP=y +# CONFIG_LANTIQ_PHY is not set +CONFIG_LANTIQ_WDT=y +# CONFIG_LANTIQ_XRX200 is not set +CONFIG_LEDS_GPIO=y +CONFIG_MDIO_BOARDINFO=y +CONFIG_MIPS=y +# CONFIG_MIPS_CDMM is not set +# CONFIG_MIPS_HUGE_TLB_SUPPORT is not set +CONFIG_MIPS_L1_CACHE_SHIFT=5 +# CONFIG_MIPS_MACHINE is not set +CONFIG_MIPS_MT_DISABLED=y +# CONFIG_MIPS_MT_SMP is not set +# CONFIG_MIPS_MT_SMTC is not set +# CONFIG_MIPS_VPE_LOADER is not set +CONFIG_MODULES_USE_ELF_REL=y +CONFIG_MTD_CFI_ADV_OPTIONS=y +CONFIG_MTD_CFI_GEOMETRY=y +CONFIG_MTD_CMDLINE_PARTS=y +CONFIG_MTD_JEDECPROBE=y +CONFIG_MTD_LANTIQ=y +CONFIG_MTD_M25P80=y +# CONFIG_MTD_NAND_XWAY is not set +CONFIG_MTD_SPI_NOR=y +CONFIG_MTD_SPLIT_FIRMWARE=y +CONFIG_MTD_UIMAGE_SPLIT=y +CONFIG_NEED_DMA_MAP_STATE=y +CONFIG_NEED_PER_CPU_KM=y +CONFIG_NO_GENERIC_PCI_IOPORT_MAP=y +CONFIG_OF=y +CONFIG_OF_ADDRESS=y +CONFIG_OF_DEVICE=y +CONFIG_OF_EARLY_FLATTREE=y +CONFIG_OF_FLATTREE=y +CONFIG_OF_GPIO=y +CONFIG_OF_IRQ=y +CONFIG_OF_MDIO=y +CONFIG_OF_MTD=y +CONFIG_OF_NET=y +CONFIG_OF_PCI=y +CONFIG_OF_PCI_IRQ=y +CONFIG_PAGEFLAGS_EXTENDED=y +CONFIG_PCI=y +# CONFIG_PCIE_LANTIQ is not set +CONFIG_PCI_DOMAINS=y +CONFIG_PCI_LANTIQ=y +CONFIG_PERCPU_RWSEM=y +CONFIG_PERF_USE_VMALLOC=y +CONFIG_PHYLIB=y +CONFIG_PINCTRL=y +# CONFIG_PINCTRL_AMD is not set +CONFIG_PINCTRL_LANTIQ=y +# CONFIG_PINCTRL_SINGLE is not set +CONFIG_PINCTRL_XWAY=y +# CONFIG_PREEMPT_RCU is not set +CONFIG_PROC_DEVICETREE=y +CONFIG_PSB6970_PHY=y +CONFIG_RTL8366RB_PHY=y +CONFIG_RTL8366_SMI=y +# CONFIG_SCSI_DMA is not set +# CONFIG_SERIAL_8250 is not set +CONFIG_SERIAL_LANTIQ=y +# CONFIG_SOC_AMAZON_SE is not set +# CONFIG_SOC_FALCON is not set +CONFIG_SOC_TYPE_XWAY=y +CONFIG_SOC_XWAY=y +CONFIG_SWAP_IO_SPACE=y +CONFIG_SWCONFIG=y +CONFIG_SYS_HAS_CPU_MIPS32_R1=y +CONFIG_SYS_HAS_CPU_MIPS32_R2=y +CONFIG_SYS_HAS_EARLY_PRINTK=y +CONFIG_SYS_SUPPORTS_32BIT_KERNEL=y +CONFIG_SYS_SUPPORTS_ARBIT_HZ=y +CONFIG_SYS_SUPPORTS_BIG_ENDIAN=y +CONFIG_SYS_SUPPORTS_MULTITHREADING=y +CONFIG_TICK_CPU_ACCOUNTING=y +CONFIG_UIDGID_CONVERTED=y +CONFIG_USB_ARCH_HAS_XHCI=y +CONFIG_USE_OF=y +CONFIG_ZONE_DMA_FLAG=0 diff --git a/target/linux/lantiq/patches-4.1/0001-MIPS-lantiq-add-pcie-driver.patch b/target/linux/lantiq/patches-4.1/0001-MIPS-lantiq-add-pcie-driver.patch new file mode 100644 index 0000000000..0e497433f9 --- /dev/null +++ b/target/linux/lantiq/patches-4.1/0001-MIPS-lantiq-add-pcie-driver.patch @@ -0,0 +1,5540 @@ +From 6f933347d0b4ed02d9534f5fa07f7b99f13eeaa1 Mon Sep 17 00:00:00 2001 +From: John Crispin +Date: Thu, 7 Aug 2014 18:12:28 +0200 +Subject: [PATCH 01/36] MIPS: lantiq: add pcie driver + +Signed-off-by: John Crispin +--- + arch/mips/lantiq/Kconfig | 10 + + arch/mips/lantiq/xway/sysctrl.c | 2 + + arch/mips/pci/Makefile | 2 + + arch/mips/pci/fixup-lantiq-pcie.c | 82 +++ + arch/mips/pci/fixup-lantiq.c | 5 +- + arch/mips/pci/ifxmips_pci_common.h | 57 ++ + arch/mips/pci/ifxmips_pcie.c | 1099 ++++++++++++++++++++++++++++++ + arch/mips/pci/ifxmips_pcie.h | 135 ++++ + arch/mips/pci/ifxmips_pcie_ar10.h | 290 ++++++++ + arch/mips/pci/ifxmips_pcie_msi.c | 392 +++++++++++ + arch/mips/pci/ifxmips_pcie_phy.c | 478 +++++++++++++ + arch/mips/pci/ifxmips_pcie_pm.c | 176 +++++ + arch/mips/pci/ifxmips_pcie_pm.h | 36 + + arch/mips/pci/ifxmips_pcie_reg.h | 1001 +++++++++++++++++++++++++++ + arch/mips/pci/ifxmips_pcie_vr9.h | 271 ++++++++ + arch/mips/pci/pci.c | 25 + + arch/mips/pci/pcie-lantiq.h | 1305 ++++++++++++++++++++++++++++++++++++ + drivers/pci/pcie/aer/Kconfig | 2 +- + include/linux/pci.h | 2 + + include/linux/pci_ids.h | 6 + + 20 files changed, 5374 insertions(+), 2 deletions(-) + create mode 100644 arch/mips/pci/fixup-lantiq-pcie.c + create mode 100644 arch/mips/pci/ifxmips_pci_common.h + create mode 100644 arch/mips/pci/ifxmips_pcie.c + create mode 100644 arch/mips/pci/ifxmips_pcie.h + create mode 100644 arch/mips/pci/ifxmips_pcie_ar10.h + create mode 100644 arch/mips/pci/ifxmips_pcie_msi.c + create mode 100644 arch/mips/pci/ifxmips_pcie_phy.c + create mode 100644 arch/mips/pci/ifxmips_pcie_pm.c + create mode 100644 arch/mips/pci/ifxmips_pcie_pm.h + create mode 100644 arch/mips/pci/ifxmips_pcie_reg.h + create mode 100644 arch/mips/pci/ifxmips_pcie_vr9.h + create mode 100644 arch/mips/pci/pcie-lantiq.h + +--- a/arch/mips/lantiq/Kconfig ++++ b/arch/mips/lantiq/Kconfig +@@ -17,6 +17,7 @@ config SOC_XWAY + bool "XWAY" + select SOC_TYPE_XWAY + select HW_HAS_PCI ++ select ARCH_SUPPORTS_MSI + + config SOC_FALCON + bool "FALCON" +@@ -37,6 +38,15 @@ config PCI_LANTIQ + bool "PCI Support" + depends on SOC_XWAY && PCI + ++config PCIE_LANTIQ ++ bool "PCIE Support" ++ depends on SOC_XWAY && PCI ++ ++config PCIE_LANTIQ_MSI ++ bool ++ depends on PCIE_LANTIQ && PCI_MSI ++ default y ++ + config XRX200_PHY_FW + bool "XRX200 PHY firmware loader" + depends on SOC_XWAY +--- a/arch/mips/lantiq/xway/sysctrl.c ++++ b/arch/mips/lantiq/xway/sysctrl.c +@@ -377,6 +377,8 @@ void __init ltq_soc_init(void) + PMU_PPE_EMA | PMU_PPE_TC | PMU_PPE_SLL01 | + PMU_PPE_QSB | PMU_PPE_TOP); + clkdev_add_pmu("1f203000.rcu", "gphy", 0, PMU_GPHY); ++ pmu_w32(~0, PMU_PWDSR1); ++ pmu_w32(pmu_r32(PMU_PWDSR) & ~PMU_PCIE_CLK, PMU_PWDSR); + } else if (of_machine_is_compatible("lantiq,ar9")) { + clkdev_add_static(ltq_ar9_cpu_hz(), ltq_ar9_fpi_hz(), + ltq_ar9_fpi_hz(), CLOCK_250M); +--- a/arch/mips/pci/Makefile ++++ b/arch/mips/pci/Makefile +@@ -45,6 +45,8 @@ obj-$(CONFIG_LANTIQ) += fixup-lantiq.o + obj-$(CONFIG_PCI_LANTIQ) += pci-lantiq.o ops-lantiq.o + obj-$(CONFIG_SOC_RT288X) += pci-rt2880.o + obj-$(CONFIG_SOC_RT3883) += pci-rt3883.o ++obj-$(CONFIG_PCIE_LANTIQ) += ifxmips_pcie_phy.o ifxmips_pcie.o fixup-lantiq-pcie.o ++obj-$(CONFIG_PCIE_LANTIQ_MSI) += pcie-lantiq-msi.o + obj-$(CONFIG_TANBAC_TB0219) += fixup-tb0219.o + obj-$(CONFIG_TANBAC_TB0226) += fixup-tb0226.o + obj-$(CONFIG_TANBAC_TB0287) += fixup-tb0287.o +--- /dev/null ++++ b/arch/mips/pci/fixup-lantiq-pcie.c +@@ -0,0 +1,82 @@ ++/****************************************************************************** ++** ++** FILE NAME : ifxmips_fixup_pcie.c ++** PROJECT : IFX UEIP for VRX200 ++** MODULES : PCIe ++** ++** DATE : 02 Mar 2009 ++** AUTHOR : Lei Chuanhua ++** DESCRIPTION : PCIe Root Complex Driver ++** COPYRIGHT : Copyright (c) 2009 ++** Infineon Technologies AG ++** Am Campeon 1-12, 85579 Neubiberg, Germany ++** ++** This program is free software; you can redistribute it and/or modify ++** it under the terms of the GNU General Public License as published by ++** the Free Software Foundation; either version 2 of the License, or ++** (at your option) any later version. ++** HISTORY ++** $Version $Date $Author $Comment ++** 0.0.1 17 Mar,2009 Lei Chuanhua Initial version ++*******************************************************************************/ ++/*! ++ \file ifxmips_fixup_pcie.c ++ \ingroup IFX_PCIE ++ \brief PCIe Fixup functions source file ++*/ ++#include ++#include ++#include ++ ++#include ++ ++#include "pcie-lantiq.h" ++ ++#define PCI_VENDOR_ID_INFINEON 0x15D1 ++#define PCI_DEVICE_ID_INFINEON_DANUBE 0x000F ++#define PCI_DEVICE_ID_INFINEON_PCIE 0x0011 ++#define PCI_VENDOR_ID_LANTIQ 0x1BEF ++#define PCI_DEVICE_ID_LANTIQ_PCIE 0x0011 ++ ++ ++ ++static void ++ifx_pcie_fixup_resource(struct pci_dev *dev) ++{ ++ u32 reg; ++ ++ IFX_PCIE_PRINT(PCIE_MSG_FIXUP, "%s dev %s: enter\n", __func__, pci_name(dev)); ++ ++ printk("%s: fixup host controller %s (%04x:%04x)\n", ++ __func__, pci_name(dev), dev->vendor, dev->device); ++ ++ /* Setup COMMAND register */ ++ reg = PCI_COMMAND_IO | PCI_COMMAND_MEMORY | PCI_COMMAND_MASTER /* | ++ PCI_COMMAND_INTX_DISABLE */| PCI_COMMAND_SERR; ++ pci_write_config_word(dev, PCI_COMMAND, reg); ++ IFX_PCIE_PRINT(PCIE_MSG_FIXUP, "%s dev %s: exit\n", __func__, pci_name(dev)); ++} ++DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_INFINEON, PCI_DEVICE_ID_INFINEON_PCIE, ifx_pcie_fixup_resource); ++DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_LANTIQ, PCI_VENDOR_ID_LANTIQ, ifx_pcie_fixup_resource); ++ ++static void ++ifx_pcie_rc_class_early_fixup(struct pci_dev *dev) ++{ ++ IFX_PCIE_PRINT(PCIE_MSG_FIXUP, "%s dev %s: enter\n", __func__, pci_name(dev)); ++ ++ if (dev->devfn == PCI_DEVFN(0, 0) && ++ (dev->class >> 8) == PCI_CLASS_BRIDGE_HOST) { ++ ++ dev->class = (PCI_CLASS_BRIDGE_PCI << 8) | (dev->class & 0xff); ++ ++ printk(KERN_INFO "%s: fixed pcie host bridge to pci-pci bridge\n", __func__); ++ } ++ IFX_PCIE_PRINT(PCIE_MSG_FIXUP, "%s dev %s: exit\n", __func__, pci_name(dev)); ++ mdelay(10); ++} ++ ++DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_INFINEON, PCI_DEVICE_ID_INFINEON_PCIE, ++ ifx_pcie_rc_class_early_fixup); ++ ++DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_LANTIQ, PCI_DEVICE_ID_LANTIQ_PCIE, ++ ifx_pcie_rc_class_early_fixup); +--- a/arch/mips/pci/fixup-lantiq.c ++++ b/arch/mips/pci/fixup-lantiq.c +@@ -8,12 +8,18 @@ + + #include + #include ++#include "ifxmips_pci_common.h" + + int (*ltq_pci_plat_arch_init)(struct pci_dev *dev) = NULL; + int (*ltq_pci_plat_dev_init)(struct pci_dev *dev) = NULL; + + int pcibios_plat_dev_init(struct pci_dev *dev) + { ++#ifdef CONFIG_PCIE_LANTIQ ++ if (pci_find_capability(dev, PCI_CAP_ID_EXP)) ++ ifx_pcie_bios_plat_dev_init(dev); ++#endif ++ + if (ltq_pci_plat_arch_init) + return ltq_pci_plat_arch_init(dev); + +@@ -25,5 +31,10 @@ int pcibios_plat_dev_init(struct pci_dev + + int __init pcibios_map_irq(const struct pci_dev *dev, u8 slot, u8 pin) + { ++#ifdef CONFIG_PCIE_LANTIQ ++ if (pci_find_capability(dev, PCI_CAP_ID_EXP)) ++ return ifx_pcie_bios_map_irq(dev, slot, pin); ++#endif ++ + return of_irq_parse_and_map_pci(dev, slot, pin); + } +--- /dev/null ++++ b/arch/mips/pci/ifxmips_pci_common.h +@@ -0,0 +1,57 @@ ++/****************************************************************************** ++** ++** FILE NAME : ifxmips_pci_common.h ++** PROJECT : IFX UEIP ++** MODULES : PCI subsystem ++** ++** DATE : 30 June 2009 ++** AUTHOR : Lei Chuanhua ++** DESCRIPTION : PCIe Root Complex Driver ++** COPYRIGHT : Copyright (c) 2009 ++** Infineon Technologies AG ++** Am Campeon 1-12, 85579 Neubiberg, Germany ++** ++** This program is free software; you can redistribute it and/or modify ++** it under the terms of the GNU General Public License as published by ++** the Free Software Foundation; either version 2 of the License, or ++** (at your option) any later version. ++** HISTORY ++** $Version $Date $Author $Comment ++** 0.0.1 30 June,2009 Lei Chuanhua Initial version ++*******************************************************************************/ ++ ++#ifndef IFXMIPS_PCI_COMMON_H ++#define IFXMIPS_PCI_COMMON_H ++#include ++/*! ++ \defgroup IFX_PCI_COM IFX PCI/PCIe common parts for OS integration ++ \brief PCI/PCIe common parts ++*/ ++ ++/*! ++ \defgroup IFX_PCI_COM_OS OS APIs ++ \ingroup IFX_PCI_COM ++ \brief PCI/PCIe bus driver OS interface functions ++*/ ++/*! ++ \file ifxmips_pci_common.h ++ \ingroup IFX_PCI_COM ++ \brief PCI/PCIe bus driver common OS header file ++*/ ++#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,24) ++#define IFX_PCI_CONST ++#else ++#define IFX_PCI_CONST const ++#endif ++#ifdef CONFIG_IFX_PCI ++extern int ifx_pci_bios_map_irq(IFX_PCI_CONST struct pci_dev *dev, u8 slot, u8 pin); ++extern int ifx_pci_bios_plat_dev_init(struct pci_dev *dev); ++#endif /* COFNIG_IFX_PCI */ ++ ++#ifdef CONFIG_PCIE_LANTIQ ++extern int ifx_pcie_bios_map_irq(IFX_PCI_CONST struct pci_dev *dev, u8 slot, u8 pin); ++extern int ifx_pcie_bios_plat_dev_init(struct pci_dev *dev); ++#endif ++ ++#endif /* IFXMIPS_PCI_COMMON_H */ ++ +--- /dev/null ++++ b/arch/mips/pci/ifxmips_pcie.c +@@ -0,0 +1,1092 @@ ++/* ++ * This program is free software; you can redistribute it and/or modify it ++ * under the terms of the GNU General Public License version 2 as published ++ * by the Free Software Foundation. ++ * ++ * Copyright (C) 2009 Lei Chuanhua ++ * Copyright (C) 2013 John Crispin ++ */ ++ ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++ ++#include "ifxmips_pcie.h" ++#include "ifxmips_pcie_reg.h" ++ ++/* Enable 32bit io due to its mem mapped io nature */ ++#define IFX_PCIE_ERROR_INT ++#define IFX_PCIE_IO_32BIT ++ ++#define IFX_PCIE_IR (INT_NUM_IM4_IRL0 + 25) ++#define IFX_PCIE_INTA (INT_NUM_IM4_IRL0 + 8) ++#define IFX_PCIE_INTB (INT_NUM_IM4_IRL0 + 9) ++#define IFX_PCIE_INTC (INT_NUM_IM4_IRL0 + 10) ++#define IFX_PCIE_INTD (INT_NUM_IM4_IRL0 + 11) ++#define MS(_v, _f) (((_v) & (_f)) >> _f##_S) ++#define SM(_v, _f) (((_v) << _f##_S) & (_f)) ++#define IFX_REG_SET_BIT(_f, _r) \ ++ IFX_REG_W32((IFX_REG_R32((_r)) &~ (_f)) | (_f), (_r)) ++ ++#define IFX_PCIE_LTSSM_ENABLE_TIMEOUT 10 ++ ++static DEFINE_SPINLOCK(ifx_pcie_lock); ++ ++u32 g_pcie_debug_flag = PCIE_MSG_ANY & (~PCIE_MSG_CFG); ++ ++static ifx_pcie_irq_t pcie_irqs[IFX_PCIE_CORE_NR] = { ++ { ++ .ir_irq = { ++ .irq = IFX_PCIE_IR, ++ .name = "ifx_pcie_rc0", ++ }, ++ ++ .legacy_irq = { ++ { ++ .irq_bit = PCIE_IRN_INTA, ++ .irq = IFX_PCIE_INTA, ++ }, ++ { ++ .irq_bit = PCIE_IRN_INTB, ++ .irq = IFX_PCIE_INTB, ++ }, ++ { ++ .irq_bit = PCIE_IRN_INTC, ++ .irq = IFX_PCIE_INTC, ++ }, ++ { ++ .irq_bit = PCIE_IRN_INTD, ++ .irq = IFX_PCIE_INTD, ++ }, ++ }, ++ }, ++ ++}; ++ ++void ifx_pcie_debug(const char *fmt, ...) ++{ ++ static char buf[256] = {0}; /* XXX */ ++ va_list ap; ++ ++ va_start(ap, fmt); ++ vsnprintf(buf, sizeof(buf), fmt, ap); ++ va_end(ap); ++ ++ printk("%s", buf); ++} ++ ++ ++static inline int pcie_ltssm_enable(int pcie_port) ++{ ++ int i; ++ ++ /* Enable LTSSM */ ++ IFX_REG_W32(PCIE_RC_CCR_LTSSM_ENABLE, PCIE_RC_CCR(pcie_port)); ++ ++ /* Wait for the link to come up */ ++ for (i = 0; i < IFX_PCIE_LTSSM_ENABLE_TIMEOUT; i++) { ++ if (!(IFX_REG_R32(PCIE_LCTLSTS(pcie_port)) & PCIE_LCTLSTS_RETRAIN_PENDING)) ++ return 0; ++ udelay(10); ++ } ++ ++ printk("%s link timeout!!!!!\n", __func__); ++ return -1; ++} ++ ++static inline void pcie_status_register_clear(int pcie_port) ++{ ++ IFX_REG_W32(0, PCIE_RC_DR(pcie_port)); ++ IFX_REG_W32(0, PCIE_PCICMDSTS(pcie_port)); ++ IFX_REG_W32(0, PCIE_DCTLSTS(pcie_port)); ++ IFX_REG_W32(0, PCIE_LCTLSTS(pcie_port)); ++ IFX_REG_W32(0, PCIE_SLCTLSTS(pcie_port)); ++ IFX_REG_W32(0, PCIE_RSTS(pcie_port)); ++ IFX_REG_W32(0, PCIE_UES_R(pcie_port)); ++ IFX_REG_W32(0, PCIE_UEMR(pcie_port)); ++ IFX_REG_W32(0, PCIE_UESR(pcie_port)); ++ IFX_REG_W32(0, PCIE_CESR(pcie_port)); ++ IFX_REG_W32(0, PCIE_CEMR(pcie_port)); ++ IFX_REG_W32(0, PCIE_RESR(pcie_port)); ++ IFX_REG_W32(0, PCIE_PVCCRSR(pcie_port)); ++ IFX_REG_W32(0, PCIE_VC0_RSR0(pcie_port)); ++ IFX_REG_W32(0, PCIE_TPFCS(pcie_port)); ++ IFX_REG_W32(0, PCIE_TNPFCS(pcie_port)); ++ IFX_REG_W32(0, PCIE_TCFCS(pcie_port)); ++ IFX_REG_W32(0, PCIE_QSR(pcie_port)); ++ IFX_REG_W32(0, PCIE_IOBLSECS(pcie_port)); ++} ++ ++static inline int ifx_pcie_link_up(int pcie_port) ++{ ++ return (IFX_REG_R32(PCIE_PHY_SR(pcie_port)) & PCIE_PHY_SR_PHY_LINK_UP) ? 1 : 0; ++} ++ ++ ++static inline void pcie_mem_io_setup(int pcie_port) ++{ ++ u32 reg; ++ /* ++ * BAR[0:1] readonly register ++ * RC contains only minimal BARs for packets mapped to this device ++ * Mem/IO filters defines a range of memory occupied by memory mapped IO devices that ++ * reside on the downstream side fo the bridge. ++ */ ++ reg = SM((PCIE_MEM_PHY_PORT_TO_END(pcie_port) >> 20), PCIE_MBML_MEM_LIMIT_ADDR) ++ | SM((PCIE_MEM_PHY_PORT_TO_BASE(pcie_port) >> 20), PCIE_MBML_MEM_BASE_ADDR); ++ ++ IFX_REG_W32(reg, PCIE_MBML(pcie_port)); ++ ++ ++#ifdef IFX_PCIE_PREFETCH_MEM_64BIT ++ reg = SM((PCIE_MEM_PHY_PORT_TO_END(pcie_port) >> 20), PCIE_PMBL_END_ADDR) ++ | SM((PCIE_MEM_PHY_PORT_TO_BASE(pcie_port) >> 20), PCIE_PMBL_UPPER_12BIT) ++ | PCIE_PMBL_64BIT_ADDR; ++ IFX_REG_W32(reg, PCIE_PMBL(pcie_port)); ++ ++ /* Must configure upper 32bit */ ++ IFX_REG_W32(0, PCIE_PMBU32(pcie_port)); ++ IFX_REG_W32(0, PCIE_PMLU32(pcie_port)); ++#else ++ /* PCIe_PBML, same as MBML */ ++ IFX_REG_W32(IFX_REG_R32(PCIE_MBML(pcie_port)), PCIE_PMBL(pcie_port)); ++#endif ++ ++ /* IO Address Range */ ++ reg = SM((PCIE_IO_PHY_PORT_TO_END(pcie_port) >> 12), PCIE_IOBLSECS_IO_LIMIT_ADDR) ++ | SM((PCIE_IO_PHY_PORT_TO_BASE(pcie_port) >> 12), PCIE_IOBLSECS_IO_BASE_ADDR); ++#ifdef IFX_PCIE_IO_32BIT ++ reg |= PCIE_IOBLSECS_32BIT_IO_ADDR; ++#endif /* IFX_PCIE_IO_32BIT */ ++ IFX_REG_W32(reg, PCIE_IOBLSECS(pcie_port)); ++ ++#ifdef IFX_PCIE_IO_32BIT ++ reg = SM((PCIE_IO_PHY_PORT_TO_END(pcie_port) >> 16), PCIE_IO_BANDL_UPPER_16BIT_IO_LIMIT) ++ | SM((PCIE_IO_PHY_PORT_TO_BASE(pcie_port) >> 16), PCIE_IO_BANDL_UPPER_16BIT_IO_BASE); ++ IFX_REG_W32(reg, PCIE_IO_BANDL(pcie_port)); ++ ++#endif /* IFX_PCIE_IO_32BIT */ ++} ++ ++static inline void ++pcie_device_setup(int pcie_port) ++{ ++ u32 reg; ++ ++ /* Device capability register, set up Maximum payload size */ ++ reg = IFX_REG_R32(PCIE_DCAP(pcie_port)); ++ reg |= PCIE_DCAP_ROLE_BASE_ERR_REPORT; ++ reg |= SM(PCIE_MAX_PAYLOAD_128, PCIE_DCAP_MAX_PAYLOAD_SIZE); ++ ++ /* Only available for EP */ ++ reg &= ~(PCIE_DCAP_EP_L0S_LATENCY | PCIE_DCAP_EP_L1_LATENCY); ++ IFX_REG_W32(reg, PCIE_DCAP(pcie_port)); ++ ++ /* Device control and status register */ ++ /* Set Maximum Read Request size for the device as a Requestor */ ++ reg = IFX_REG_R32(PCIE_DCTLSTS(pcie_port)); ++ ++ /* ++ * Request size can be larger than the MPS used, but the completions returned ++ * for the read will be bounded by the MPS size. ++ * In our system, Max request size depends on AHB burst size. It is 64 bytes. ++ * but we set it as 128 as minimum one. ++ */ ++ reg |= SM(PCIE_MAX_PAYLOAD_128, PCIE_DCTLSTS_MAX_READ_SIZE) ++ | SM(PCIE_MAX_PAYLOAD_128, PCIE_DCTLSTS_MAX_PAYLOAD_SIZE); ++ ++ /* Enable relaxed ordering, no snoop, and all kinds of errors */ ++ reg |= PCIE_DCTLSTS_RELAXED_ORDERING_EN | PCIE_DCTLSTS_ERR_EN | PCIE_DCTLSTS_NO_SNOOP_EN; ++ ++ IFX_REG_W32(reg, PCIE_DCTLSTS(pcie_port)); ++} ++ ++static inline void ++pcie_link_setup(int pcie_port) ++{ ++ u32 reg; ++ ++ /* ++ * XXX, Link capability register, bit 18 for EP CLKREQ# dynamic clock management for L1, L2/3 CPM ++ * L0s is reported during link training via TS1 order set by N_FTS ++ */ ++ reg = IFX_REG_R32(PCIE_LCAP(pcie_port)); ++ reg &= ~PCIE_LCAP_L0S_EIXT_LATENCY; ++ reg |= SM(3, PCIE_LCAP_L0S_EIXT_LATENCY); ++ IFX_REG_W32(reg, PCIE_LCAP(pcie_port)); ++ ++ /* Link control and status register */ ++ reg = IFX_REG_R32(PCIE_LCTLSTS(pcie_port)); ++ ++ /* Link Enable, ASPM enabled */ ++ reg &= ~PCIE_LCTLSTS_LINK_DISABLE; ++ ++#ifdef CONFIG_PCIEASPM ++ /* ++ * We use the same physical reference clock that the platform provides on the connector ++ * It paved the way for ASPM to calculate the new exit Latency ++ */ ++ reg |= PCIE_LCTLSTS_SLOT_CLK_CFG; ++ reg |= PCIE_LCTLSTS_COM_CLK_CFG; ++ /* ++ * We should disable ASPM by default except that we have dedicated power management support ++ * Enable ASPM will cause the system hangup/instability, performance degration ++ */ ++ reg |= PCIE_LCTLSTS_ASPM_ENABLE; ++#else ++ reg &= ~PCIE_LCTLSTS_ASPM_ENABLE; ++#endif /* CONFIG_PCIEASPM */ ++ ++ /* ++ * The maximum size of any completion with data packet is bounded by the MPS setting ++ * in device control register ++ */ ++ ++ /* RCB may cause multiple split transactions, two options available, we use 64 byte RCB */ ++ reg &= ~ PCIE_LCTLSTS_RCB128; ++ ++ IFX_REG_W32(reg, PCIE_LCTLSTS(pcie_port)); ++} ++ ++static inline void pcie_error_setup(int pcie_port) ++{ ++ u32 reg; ++ ++ /* ++ * Forward ERR_COR, ERR_NONFATAL, ERR_FATAL to the backbone ++ * Poisoned write TLPs and completions indicating poisoned TLPs will set the PCIe_PCICMDSTS.MDPE ++ */ ++ reg = IFX_REG_R32(PCIE_INTRBCTRL(pcie_port)); ++ reg |= PCIE_INTRBCTRL_SERR_ENABLE | PCIE_INTRBCTRL_PARITY_ERR_RESP_ENABLE; ++ ++ IFX_REG_W32(reg, PCIE_INTRBCTRL(pcie_port)); ++ ++ /* Uncorrectable Error Mask Register, Unmask all bits in PCIE_UESR */ ++ reg = IFX_REG_R32(PCIE_UEMR(pcie_port)); ++ reg &= ~PCIE_ALL_UNCORRECTABLE_ERR; ++ IFX_REG_W32(reg, PCIE_UEMR(pcie_port)); ++ ++ /* Uncorrectable Error Severity Register, ALL errors are FATAL */ ++ IFX_REG_W32(PCIE_ALL_UNCORRECTABLE_ERR, PCIE_UESR(pcie_port)); ++ ++ /* Correctable Error Mask Register, unmask all bits */ ++ reg = IFX_REG_R32(PCIE_CEMR(pcie_port)); ++ reg &= ~PCIE_CORRECTABLE_ERR; ++ IFX_REG_W32(reg, PCIE_CEMR(pcie_port)); ++ ++ /* Advanced Error Capabilities and Control Registr */ ++ reg = IFX_REG_R32(PCIE_AECCR(pcie_port)); ++ reg |= PCIE_AECCR_ECRC_CHECK_EN | PCIE_AECCR_ECRC_GEN_EN; ++ IFX_REG_W32(reg, PCIE_AECCR(pcie_port)); ++ ++ /* Root Error Command Register, Report all types of errors */ ++ reg = IFX_REG_R32(PCIE_RECR(pcie_port)); ++ reg |= PCIE_RECR_ERR_REPORT_EN; ++ IFX_REG_W32(reg, PCIE_RECR(pcie_port)); ++ ++ /* Clear the Root status register */ ++ reg = IFX_REG_R32(PCIE_RESR(pcie_port)); ++ IFX_REG_W32(reg, PCIE_RESR(pcie_port)); ++} ++ ++static inline void pcie_port_logic_setup(int pcie_port) ++{ ++ u32 reg; ++ ++ /* FTS number, default 12, increase to 63, may increase time from/to L0s to L0 */ ++ reg = IFX_REG_R32(PCIE_AFR(pcie_port)); ++ reg &= ~(PCIE_AFR_FTS_NUM | PCIE_AFR_COM_FTS_NUM); ++ reg |= SM(PCIE_AFR_FTS_NUM_DEFAULT, PCIE_AFR_FTS_NUM) ++ | SM(PCIE_AFR_FTS_NUM_DEFAULT, PCIE_AFR_COM_FTS_NUM); ++ /* L0s and L1 entry latency */ ++ reg &= ~(PCIE_AFR_L0S_ENTRY_LATENCY | PCIE_AFR_L1_ENTRY_LATENCY); ++ reg |= SM(PCIE_AFR_L0S_ENTRY_LATENCY_DEFAULT, PCIE_AFR_L0S_ENTRY_LATENCY) ++ | SM(PCIE_AFR_L1_ENTRY_LATENCY_DEFAULT, PCIE_AFR_L1_ENTRY_LATENCY); ++ IFX_REG_W32(reg, PCIE_AFR(pcie_port)); ++ ++ ++ /* Port Link Control Register */ ++ reg = IFX_REG_R32(PCIE_PLCR(pcie_port)); ++ reg |= PCIE_PLCR_DLL_LINK_EN; /* Enable the DLL link */ ++ IFX_REG_W32(reg, PCIE_PLCR(pcie_port)); ++ ++ /* Lane Skew Register */ ++ reg = IFX_REG_R32(PCIE_LSR(pcie_port)); ++ /* Enable ACK/NACK and FC */ ++ reg &= ~(PCIE_LSR_ACKNAK_DISABLE | PCIE_LSR_FC_DISABLE); ++ IFX_REG_W32(reg, PCIE_LSR(pcie_port)); ++ ++ /* Symbol Timer Register and Filter Mask Register 1 */ ++ reg = IFX_REG_R32(PCIE_STRFMR(pcie_port)); ++ ++ /* Default SKP interval is very accurate already, 5us */ ++ /* Enable IO/CFG transaction */ ++ reg |= PCIE_STRFMR_RX_CFG_TRANS_ENABLE | PCIE_STRFMR_RX_IO_TRANS_ENABLE; ++ /* Disable FC WDT */ ++ reg &= ~PCIE_STRFMR_FC_WDT_DISABLE; ++ IFX_REG_W32(reg, PCIE_STRFMR(pcie_port)); ++ ++ /* Filter Masker Register 2 */ ++ reg = IFX_REG_R32(PCIE_FMR2(pcie_port)); ++ reg |= PCIE_FMR2_VENDOR_MSG1_PASSED_TO_TRGT1 | PCIE_FMR2_VENDOR_MSG0_PASSED_TO_TRGT1; ++ IFX_REG_W32(reg, PCIE_FMR2(pcie_port)); ++ ++ /* VC0 Completion Receive Queue Control Register */ ++ reg = IFX_REG_R32(PCIE_VC0_CRQCR(pcie_port)); ++ reg &= ~PCIE_VC0_CRQCR_CPL_TLP_QUEUE_MODE; ++ reg |= SM(PCIE_VC0_TLP_QUEUE_MODE_BYPASS, PCIE_VC0_CRQCR_CPL_TLP_QUEUE_MODE); ++ IFX_REG_W32(reg, PCIE_VC0_CRQCR(pcie_port)); ++} ++ ++static inline void pcie_rc_cfg_reg_setup(int pcie_port) ++{ ++ u32 reg; ++ ++ /* Disable LTSSM */ ++ IFX_REG_W32(0, PCIE_RC_CCR(pcie_port)); /* Disable LTSSM */ ++ ++ pcie_mem_io_setup(pcie_port); ++ ++ /* XXX, MSI stuff should only apply to EP */ ++ /* MSI Capability: Only enable 32-bit addresses */ ++ reg = IFX_REG_R32(PCIE_MCAPR(pcie_port)); ++ reg &= ~PCIE_MCAPR_ADDR64_CAP; ++ ++ reg |= PCIE_MCAPR_MSI_ENABLE; ++ ++ /* Disable multiple message */ ++ reg &= ~(PCIE_MCAPR_MULTI_MSG_CAP | PCIE_MCAPR_MULTI_MSG_ENABLE); ++ IFX_REG_W32(reg, PCIE_MCAPR(pcie_port)); ++ ++ ++ /* Enable PME, Soft reset enabled */ ++ reg = IFX_REG_R32(PCIE_PM_CSR(pcie_port)); ++ reg |= PCIE_PM_CSR_PME_ENABLE | PCIE_PM_CSR_SW_RST; ++ IFX_REG_W32(reg, PCIE_PM_CSR(pcie_port)); ++ ++ /* setup the bus */ ++ reg = SM(0, PCIE_BNR_PRIMARY_BUS_NUM) | SM(1, PCIE_PNR_SECONDARY_BUS_NUM) | SM(0xFF, PCIE_PNR_SUB_BUS_NUM); ++ IFX_REG_W32(reg, PCIE_BNR(pcie_port)); ++ ++ ++ pcie_device_setup(pcie_port); ++ pcie_link_setup(pcie_port); ++ pcie_error_setup(pcie_port); ++ ++ /* Root control and capabilities register */ ++ reg = IFX_REG_R32(PCIE_RCTLCAP(pcie_port)); ++ reg |= PCIE_RCTLCAP_SERR_ENABLE | PCIE_RCTLCAP_PME_INT_EN; ++ IFX_REG_W32(reg, PCIE_RCTLCAP(pcie_port)); ++ ++ /* Port VC Capability Register 2 */ ++ reg = IFX_REG_R32(PCIE_PVC2(pcie_port)); ++ reg &= ~PCIE_PVC2_VC_ARB_WRR; ++ reg |= PCIE_PVC2_VC_ARB_16P_FIXED_WRR; ++ IFX_REG_W32(reg, PCIE_PVC2(pcie_port)); ++ ++ /* VC0 Resource Capability Register */ ++ reg = IFX_REG_R32(PCIE_VC0_RC(pcie_port)); ++ reg &= ~PCIE_VC0_RC_REJECT_SNOOP; ++ IFX_REG_W32(reg, PCIE_VC0_RC(pcie_port)); ++ ++ pcie_port_logic_setup(pcie_port); ++} ++ ++static int ifx_pcie_wait_phy_link_up(int pcie_port) ++{ ++#define IFX_PCIE_PHY_LINK_UP_TIMEOUT 1000 /* XXX, tunable */ ++ int i; ++ ++ /* Wait for PHY link is up */ ++ for (i = 0; i < IFX_PCIE_PHY_LINK_UP_TIMEOUT; i++) { ++ if (ifx_pcie_link_up(pcie_port)) { ++ break; ++ } ++ udelay(100); ++ } ++ if (i >= IFX_PCIE_PHY_LINK_UP_TIMEOUT) { ++ printk(KERN_ERR "%s timeout\n", __func__); ++ return -1; ++ } ++ ++ /* Check data link up or not */ ++ if (!(IFX_REG_R32(PCIE_RC_DR(pcie_port)) & PCIE_RC_DR_DLL_UP)) { ++ printk(KERN_ERR "%s DLL link is still down\n", __func__); ++ return -1; ++ } ++ ++ /* Check Data link active or not */ ++ if (!(IFX_REG_R32(PCIE_LCTLSTS(pcie_port)) & PCIE_LCTLSTS_DLL_ACTIVE)) { ++ printk(KERN_ERR "%s DLL is not active\n", __func__); ++ return -1; ++ } ++ return 0; ++} ++ ++static inline int pcie_app_loigc_setup(int pcie_port) ++{ ++ /* supress ahb bus errrors */ ++ IFX_REG_W32(PCIE_AHB_CTRL_BUS_ERROR_SUPPRESS, PCIE_AHB_CTRL(pcie_port)); ++ ++ /* Pull PCIe EP out of reset */ ++ pcie_device_rst_deassert(pcie_port); ++ ++ /* Start LTSSM training between RC and EP */ ++ pcie_ltssm_enable(pcie_port); ++ ++ /* Check PHY status after enabling LTSSM */ ++ if (ifx_pcie_wait_phy_link_up(pcie_port) != 0) ++ return -1; ++ ++ return 0; ++} ++ ++/* ++ * The numbers below are directly from the PCIe spec table 3-4/5. ++ */ ++static inline void pcie_replay_time_update(int pcie_port) ++{ ++ u32 reg; ++ int nlw; ++ int rtl; ++ ++ reg = IFX_REG_R32(PCIE_LCTLSTS(pcie_port)); ++ ++ nlw = MS(reg, PCIE_LCTLSTS_NEGOTIATED_LINK_WIDTH); ++ switch (nlw) { ++ case PCIE_MAX_LENGTH_WIDTH_X1: ++ rtl = 1677; ++ break; ++ case PCIE_MAX_LENGTH_WIDTH_X2: ++ rtl = 867; ++ break; ++ case PCIE_MAX_LENGTH_WIDTH_X4: ++ rtl = 462; ++ break; ++ case PCIE_MAX_LENGTH_WIDTH_X8: ++ rtl = 258; ++ break; ++ default: ++ rtl = 1677; ++ break; ++ } ++ reg = IFX_REG_R32(PCIE_ALTRT(pcie_port)); ++ reg &= ~PCIE_ALTRT_REPLAY_TIME_LIMIT; ++ reg |= SM(rtl, PCIE_ALTRT_REPLAY_TIME_LIMIT); ++ IFX_REG_W32(reg, PCIE_ALTRT(pcie_port)); ++} ++ ++/* ++ * Table 359 Enhanced Configuration Address Mapping1) ++ * 1) This table is defined in Table 7-1, page 341, PCI Express Base Specification v1.1 ++ * Memory Address PCI Express Configuration Space ++ * A[(20+n-1):20] Bus Number 1 < n < 8 ++ * A[19:15] Device Number ++ * A[14:12] Function Number ++ * A[11:8] Extended Register Number ++ * A[7:2] Register Number ++ * A[1:0] Along with size of the access, used to generate Byte Enables ++ * For VR9, only the address bits [22:0] are mapped to the configuration space: ++ * . Address bits [22:20] select the target bus (1-of-8)1) ++ * . Address bits [19:15] select the target device (1-of-32) on the bus ++ * . Address bits [14:12] select the target function (1-of-8) within the device. ++ * . Address bits [11:2] selects the target dword (1-of-1024) within the selected function.s configuration space ++ * . Address bits [1:0] define the start byte location within the selected dword. ++ */ ++static inline u32 pcie_bus_addr(u8 bus_num, u16 devfn, int where) ++{ ++ u32 addr; ++ u8 bus; ++ ++ if (!bus_num) { ++ /* type 0 */ ++ addr = ((PCI_SLOT(devfn) & 0x1F) << 15) | ((PCI_FUNC(devfn) & 0x7) << 12) | ((where & 0xFFF)& ~3); ++ } else { ++ bus = bus_num; ++ /* type 1, only support 8 buses */ ++ addr = ((bus & 0x7) << 20) | ((PCI_SLOT(devfn) & 0x1F) << 15) | ++ ((PCI_FUNC(devfn) & 0x7) << 12) | ((where & 0xFFF) & ~3); ++ } ++ return addr; ++} ++ ++static int pcie_valid_config(int pcie_port, int bus, int dev) ++{ ++ /* RC itself */ ++ if ((bus == 0) && (dev == 0)) { ++ return 1; ++ } ++ ++ /* No physical link */ ++ if (!ifx_pcie_link_up(pcie_port)) { ++ return 0; ++ } ++ ++ /* Bus zero only has RC itself ++ * XXX, check if EP will be integrated ++ */ ++ if ((bus == 0) && (dev != 0)) { ++ return 0; ++ } ++ ++ /* Maximum 8 buses supported for VRX */ ++ if (bus > 9) { ++ return 0; ++ } ++ ++ /* ++ * PCIe is PtP link, one bus only supports only one device ++ * except bus zero and PCIe switch which is virtual bus device ++ * The following two conditions really depends on the system design ++ * and attached the device. ++ * XXX, how about more new switch ++ */ ++ if ((bus == 1) && (dev != 0)) { ++ return 0; ++ } ++ ++ if ((bus >= 3) && (dev != 0)) { ++ return 0; ++ } ++ return 1; ++} ++ ++static inline u32 ifx_pcie_cfg_rd(int pcie_port, u32 reg) ++{ ++ return IFX_REG_R32((volatile u32 *)(PCIE_CFG_PORT_TO_BASE(pcie_port) + reg)); ++} ++ ++static inline void ifx_pcie_cfg_wr(int pcie_port, unsigned int reg, u32 val) ++{ ++ IFX_REG_W32( val, (volatile u32 *)(PCIE_CFG_PORT_TO_BASE(pcie_port) + reg)); ++} ++ ++static inline u32 ifx_pcie_rc_cfg_rd(int pcie_port, u32 reg) ++{ ++ return IFX_REG_R32((volatile u32 *)(PCIE_RC_PORT_TO_BASE(pcie_port) + reg)); ++} ++ ++static inline void ifx_pcie_rc_cfg_wr(int pcie_port, unsigned int reg, u32 val) ++{ ++ IFX_REG_W32(val, (volatile u32 *)(PCIE_RC_PORT_TO_BASE(pcie_port) + reg)); ++} ++ ++u32 ifx_pcie_bus_enum_read_hack(int where, u32 value) ++{ ++ u32 tvalue = value; ++ ++ if (where == PCI_PRIMARY_BUS) { ++ u8 primary, secondary, subordinate; ++ ++ primary = tvalue & 0xFF; ++ secondary = (tvalue >> 8) & 0xFF; ++ subordinate = (tvalue >> 16) & 0xFF; ++ primary += pcibios_1st_host_bus_nr(); ++ secondary += pcibios_1st_host_bus_nr(); ++ subordinate += pcibios_1st_host_bus_nr(); ++ tvalue = (tvalue & 0xFF000000) | (u32)primary | (u32)(secondary << 8) | (u32)(subordinate << 16); ++ } ++ return tvalue; ++} ++ ++u32 ifx_pcie_bus_enum_write_hack(int where, u32 value) ++{ ++ u32 tvalue = value; ++ ++ if (where == PCI_PRIMARY_BUS) { ++ u8 primary, secondary, subordinate; ++ ++ primary = tvalue & 0xFF; ++ secondary = (tvalue >> 8) & 0xFF; ++ subordinate = (tvalue >> 16) & 0xFF; ++ if (primary > 0 && primary != 0xFF) { ++ primary -= pcibios_1st_host_bus_nr(); ++ } ++ ++ if (secondary > 0 && secondary != 0xFF) { ++ secondary -= pcibios_1st_host_bus_nr(); ++ } ++ if (subordinate > 0 && subordinate != 0xFF) { ++ subordinate -= pcibios_1st_host_bus_nr(); ++ } ++ tvalue = (tvalue & 0xFF000000) | (u32)primary | (u32)(secondary << 8) | (u32)(subordinate << 16); ++ } ++ else if (where == PCI_SUBORDINATE_BUS) { ++ u8 subordinate = tvalue & 0xFF; ++ ++ subordinate = subordinate > 0 ? subordinate - pcibios_1st_host_bus_nr() : 0; ++ tvalue = subordinate; ++ } ++ return tvalue; ++} ++ ++static int ifx_pcie_read_config(struct pci_bus *bus, u32 devfn, ++ int where, int size, u32 *value) ++{ ++ u32 data = 0; ++ int bus_number = bus->number; ++ static const u32 mask[8] = {0, 0xff, 0xffff, 0, 0xffffffff, 0, 0, 0}; ++ int ret = PCIBIOS_SUCCESSFUL; ++ struct ifx_pci_controller *ctrl = bus->sysdata; ++ int pcie_port = ctrl->port; ++ ++ if (unlikely(size != 1 && size != 2 && size != 4)){ ++ ret = PCIBIOS_BAD_REGISTER_NUMBER; ++ goto out; ++ } ++ ++ /* Make sure the address is aligned to natural boundary */ ++ if (unlikely(((size - 1) & where))) { ++ ret = PCIBIOS_BAD_REGISTER_NUMBER; ++ goto out; ++ } ++ ++ /* ++ * If we are second controller, we have to cheat OS so that it assume ++ * its bus number starts from 0 in host controller ++ */ ++ bus_number = ifx_pcie_bus_nr_deduct(bus_number, pcie_port); ++ ++ /* ++ * We need to force the bus number to be zero on the root ++ * bus. Linux numbers the 2nd root bus to start after all ++ * busses on root 0. ++ */ ++ if (bus->parent == NULL) { ++ bus_number = 0; ++ } ++ ++ /* ++ * PCIe only has a single device connected to it. It is ++ * always device ID 0. Don't bother doing reads for other ++ * device IDs on the first segment. ++ */ ++ if ((bus_number == 0) && (PCI_SLOT(devfn) != 0)) { ++ ret = PCIBIOS_FUNC_NOT_SUPPORTED; ++ goto out; ++ } ++ ++ if (pcie_valid_config(pcie_port, bus_number, PCI_SLOT(devfn)) == 0) { ++ *value = 0xffffffff; ++ ret = PCIBIOS_DEVICE_NOT_FOUND; ++ goto out; ++ } ++ ++ PCIE_IRQ_LOCK(ifx_pcie_lock); ++ if (bus_number == 0) { /* RC itself */ ++ u32 t; ++ ++ t = (where & ~3); ++ data = ifx_pcie_rc_cfg_rd(pcie_port, t); ++ } else { ++ u32 addr = pcie_bus_addr(bus_number, devfn, where); ++ ++ data = ifx_pcie_cfg_rd(pcie_port, addr); ++ #ifdef CONFIG_IFX_PCIE_HW_SWAP ++ data = le32_to_cpu(data); ++ #endif /* CONFIG_IFX_PCIE_HW_SWAP */ ++ } ++ /* To get a correct PCI topology, we have to restore the bus number to OS */ ++ data = ifx_pcie_bus_enum_hack(bus, devfn, where, data, pcie_port, 1); ++ ++ PCIE_IRQ_UNLOCK(ifx_pcie_lock); ++ ++ *value = (data >> (8 * (where & 3))) & mask[size & 7]; ++out: ++ return ret; ++} ++ ++static u32 ifx_pcie_size_to_value(int where, int size, u32 data, u32 value) ++{ ++ u32 shift; ++ u32 tdata = data; ++ ++ switch (size) { ++ case 1: ++ shift = (where & 0x3) << 3; ++ tdata &= ~(0xffU << shift); ++ tdata |= ((value & 0xffU) << shift); ++ break; ++ case 2: ++ shift = (where & 3) << 3; ++ tdata &= ~(0xffffU << shift); ++ tdata |= ((value & 0xffffU) << shift); ++ break; ++ case 4: ++ tdata = value; ++ break; ++ } ++ return tdata; ++} ++ ++static int ifx_pcie_write_config(struct pci_bus *bus, u32 devfn, ++ int where, int size, u32 value) ++{ ++ int bus_number = bus->number; ++ int ret = PCIBIOS_SUCCESSFUL; ++ struct ifx_pci_controller *ctrl = bus->sysdata; ++ int pcie_port = ctrl->port; ++ u32 tvalue = value; ++ u32 data; ++ ++ /* Make sure the address is aligned to natural boundary */ ++ if (unlikely(((size - 1) & where))) { ++ ret = PCIBIOS_BAD_REGISTER_NUMBER; ++ goto out; ++ } ++ /* ++ * If we are second controller, we have to cheat OS so that it assume ++ * its bus number starts from 0 in host controller ++ */ ++ bus_number = ifx_pcie_bus_nr_deduct(bus_number, pcie_port); ++ ++ /* ++ * We need to force the bus number to be zero on the root ++ * bus. Linux numbers the 2nd root bus to start after all ++ * busses on root 0. ++ */ ++ if (bus->parent == NULL) { ++ bus_number = 0; ++ } ++ ++ if (pcie_valid_config(pcie_port, bus_number, PCI_SLOT(devfn)) == 0) { ++ ret = PCIBIOS_DEVICE_NOT_FOUND; ++ goto out; ++ } ++ ++ /* XXX, some PCIe device may need some delay */ ++ PCIE_IRQ_LOCK(ifx_pcie_lock); ++ ++ /* ++ * To configure the correct bus topology using native way, we have to cheat Os so that ++ * it can configure the PCIe hardware correctly. ++ */ ++ tvalue = ifx_pcie_bus_enum_hack(bus, devfn, where, value, pcie_port, 0); ++ ++ if (bus_number == 0) { /* RC itself */ ++ u32 t; ++ ++ t = (where & ~3); ++ data = ifx_pcie_rc_cfg_rd(pcie_port, t); ++ ++ data = ifx_pcie_size_to_value(where, size, data, tvalue); ++ ++ ifx_pcie_rc_cfg_wr(pcie_port, t, data); ++ } else { ++ u32 addr = pcie_bus_addr(bus_number, devfn, where); ++ ++ data = ifx_pcie_cfg_rd(pcie_port, addr); ++#ifdef CONFIG_IFX_PCIE_HW_SWAP ++ data = le32_to_cpu(data); ++#endif ++ ++ data = ifx_pcie_size_to_value(where, size, data, tvalue); ++#ifdef CONFIG_IFX_PCIE_HW_SWAP ++ data = cpu_to_le32(data); ++#endif ++ ifx_pcie_cfg_wr(pcie_port, addr, data); ++ } ++ PCIE_IRQ_UNLOCK(ifx_pcie_lock); ++out: ++ return ret; ++} ++ ++static struct resource ifx_pcie_io_resource = { ++ .name = "PCIe0 I/O space", ++ .start = PCIE_IO_PHY_BASE, ++ .end = PCIE_IO_PHY_END, ++ .flags = IORESOURCE_IO, ++}; ++ ++static struct resource ifx_pcie_mem_resource = { ++ .name = "PCIe0 Memory space", ++ .start = PCIE_MEM_PHY_BASE, ++ .end = PCIE_MEM_PHY_END, ++ .flags = IORESOURCE_MEM, ++}; ++ ++static struct pci_ops ifx_pcie_ops = { ++ .read = ifx_pcie_read_config, ++ .write = ifx_pcie_write_config, ++}; ++ ++static struct ifx_pci_controller ifx_pcie_controller[IFX_PCIE_CORE_NR] = { ++ { ++ .pcic = { ++ .pci_ops = &ifx_pcie_ops, ++ .mem_resource = &ifx_pcie_mem_resource, ++ .io_resource = &ifx_pcie_io_resource, ++ }, ++ .port = IFX_PCIE_PORT0, ++ }, ++}; ++ ++#ifdef IFX_PCIE_ERROR_INT ++ ++static irqreturn_t pcie_rc_core_isr(int irq, void *dev_id) ++{ ++ struct ifx_pci_controller *ctrl = (struct ifx_pci_controller *)dev_id; ++ int pcie_port = ctrl->port; ++ u32 reg; ++ ++ printk("PCIe RC error intr %d\n", irq); ++ reg = IFX_REG_R32(PCIE_IRNCR(pcie_port)); ++ reg &= PCIE_RC_CORE_COMBINED_INT; ++ IFX_REG_W32(reg, PCIE_IRNCR(pcie_port)); ++ ++ return IRQ_HANDLED; ++} ++ ++static int ++pcie_rc_core_int_init(int pcie_port) ++{ ++ int ret; ++ ++ /* Enable core interrupt */ ++ IFX_REG_SET_BIT(PCIE_RC_CORE_COMBINED_INT, PCIE_IRNEN(pcie_port)); ++ ++ /* Clear it first */ ++ IFX_REG_SET_BIT(PCIE_RC_CORE_COMBINED_INT, PCIE_IRNCR(pcie_port)); ++ ret = request_irq(pcie_irqs[pcie_port].ir_irq.irq, pcie_rc_core_isr, 0, ++ pcie_irqs[pcie_port].ir_irq.name, &ifx_pcie_controller[pcie_port]); ++ if (ret) ++ printk(KERN_ERR "%s request irq %d failed\n", __func__, IFX_PCIE_IR); ++ ++ return ret; ++} ++#endif ++ ++int ifx_pcie_bios_map_irq(IFX_PCI_CONST struct pci_dev *dev, u8 slot, u8 pin) ++{ ++ u32 irq_bit = 0; ++ int irq = 0; ++ struct ifx_pci_controller *ctrl = dev->bus->sysdata; ++ int pcie_port = ctrl->port; ++ ++ printk("%s port %d dev %s slot %d pin %d \n", __func__, pcie_port, pci_name(dev), slot, pin); ++ ++ if ((pin == PCIE_LEGACY_DISABLE) || (pin > PCIE_LEGACY_INT_MAX)) { ++ printk(KERN_WARNING "WARNING: dev %s: invalid interrupt pin %d\n", pci_name(dev), pin); ++ return -1; ++ } ++ ++ /* Pin index so minus one */ ++ irq_bit = pcie_irqs[pcie_port].legacy_irq[pin - 1].irq_bit; ++ irq = pcie_irqs[pcie_port].legacy_irq[pin - 1].irq; ++ IFX_REG_SET_BIT(irq_bit, PCIE_IRNEN(pcie_port)); ++ IFX_REG_SET_BIT(irq_bit, PCIE_IRNCR(pcie_port)); ++ printk("%s dev %s irq %d assigned\n", __func__, pci_name(dev), irq); ++ return irq; ++} ++ ++int ifx_pcie_bios_plat_dev_init(struct pci_dev *dev) ++{ ++ u16 config; ++#ifdef IFX_PCIE_ERROR_INT ++ u32 dconfig; ++ int pos; ++#endif ++ ++ /* Enable reporting System errors and parity errors on all devices */ ++ /* Enable parity checking and error reporting */ ++ pci_read_config_word(dev, PCI_COMMAND, &config); ++ config |= PCI_COMMAND_PARITY | PCI_COMMAND_SERR /*| PCI_COMMAND_INVALIDATE | ++ PCI_COMMAND_FAST_BACK*/; ++ pci_write_config_word(dev, PCI_COMMAND, config); ++ ++ if (dev->subordinate) { ++ /* Set latency timers on sub bridges */ ++ pci_write_config_byte(dev, PCI_SEC_LATENCY_TIMER, 0x40); /* XXX, */ ++ /* More bridge error detection */ ++ pci_read_config_word(dev, PCI_BRIDGE_CONTROL, &config); ++ config |= PCI_BRIDGE_CTL_PARITY | PCI_BRIDGE_CTL_SERR; ++ pci_write_config_word(dev, PCI_BRIDGE_CONTROL, config); ++ } ++#ifdef IFX_PCIE_ERROR_INT ++ /* Enable the PCIe normal error reporting */ ++ pos = pci_find_capability(dev, PCI_CAP_ID_EXP); ++ if (pos) { ++ ++ /* Disable system error generation in response to error messages */ ++ pci_read_config_word(dev, pos + PCI_EXP_RTCTL, &config); ++ config &= ~(PCI_EXP_RTCTL_SECEE | PCI_EXP_RTCTL_SENFEE | PCI_EXP_RTCTL_SEFEE); ++ pci_write_config_word(dev, pos + PCI_EXP_RTCTL, config); ++ ++ /* Clear PCIE Capability's Device Status */ ++ pci_read_config_word(dev, pos + PCI_EXP_DEVSTA, &config); ++ pci_write_config_word(dev, pos + PCI_EXP_DEVSTA, config); ++ ++ /* Update Device Control */ ++ pci_read_config_word(dev, pos + PCI_EXP_DEVCTL, &config); ++ /* Correctable Error Reporting */ ++ config |= PCI_EXP_DEVCTL_CERE; ++ /* Non-Fatal Error Reporting */ ++ config |= PCI_EXP_DEVCTL_NFERE; ++ /* Fatal Error Reporting */ ++ config |= PCI_EXP_DEVCTL_FERE; ++ /* Unsupported Request */ ++ config |= PCI_EXP_DEVCTL_URRE; ++ pci_write_config_word(dev, pos + PCI_EXP_DEVCTL, config); ++ } ++ ++ /* Find the Advanced Error Reporting capability */ ++ pos = pci_find_ext_capability(dev, PCI_EXT_CAP_ID_ERR); ++ if (pos) { ++ /* Clear Uncorrectable Error Status */ ++ pci_read_config_dword(dev, pos + PCI_ERR_UNCOR_STATUS, &dconfig); ++ pci_write_config_dword(dev, pos + PCI_ERR_UNCOR_STATUS, dconfig); ++ /* Enable reporting of all uncorrectable errors */ ++ /* Uncorrectable Error Mask - turned on bits disable errors */ ++ pci_write_config_dword(dev, pos + PCI_ERR_UNCOR_MASK, 0); ++ /* ++ * Leave severity at HW default. This only controls if ++ * errors are reported as uncorrectable or ++ * correctable, not if the error is reported. ++ */ ++ /* PCI_ERR_UNCOR_SEVER - Uncorrectable Error Severity */ ++ /* Clear Correctable Error Status */ ++ pci_read_config_dword(dev, pos + PCI_ERR_COR_STATUS, &dconfig); ++ pci_write_config_dword(dev, pos + PCI_ERR_COR_STATUS, dconfig); ++ /* Enable reporting of all correctable errors */ ++ /* Correctable Error Mask - turned on bits disable errors */ ++ pci_write_config_dword(dev, pos + PCI_ERR_COR_MASK, 0); ++ /* Advanced Error Capabilities */ ++ pci_read_config_dword(dev, pos + PCI_ERR_CAP, &dconfig); ++ /* ECRC Generation Enable */ ++ if (dconfig & PCI_ERR_CAP_ECRC_GENC) { ++ dconfig |= PCI_ERR_CAP_ECRC_GENE; ++ } ++ /* ECRC Check Enable */ ++ if (dconfig & PCI_ERR_CAP_ECRC_CHKC) { ++ dconfig |= PCI_ERR_CAP_ECRC_CHKE; ++ } ++ pci_write_config_dword(dev, pos + PCI_ERR_CAP, dconfig); ++ ++ /* PCI_ERR_HEADER_LOG - Header Log Register (16 bytes) */ ++ /* Enable Root Port's interrupt in response to error messages */ ++ pci_write_config_dword(dev, pos + PCI_ERR_ROOT_COMMAND, ++ PCI_ERR_ROOT_CMD_COR_EN | ++ PCI_ERR_ROOT_CMD_NONFATAL_EN | ++ PCI_ERR_ROOT_CMD_FATAL_EN); ++ /* Clear the Root status register */ ++ pci_read_config_dword(dev, pos + PCI_ERR_ROOT_STATUS, &dconfig); ++ pci_write_config_dword(dev, pos + PCI_ERR_ROOT_STATUS, dconfig); ++ } ++#endif /* IFX_PCIE_ERROR_INT */ ++ /* WAR, only 128 MRRS is supported, force all EPs to support this value */ ++ pcie_set_readrq(dev, 128); ++ return 0; ++} ++ ++static int ++pcie_rc_initialize(int pcie_port) ++{ ++ int i; ++#define IFX_PCIE_PHY_LOOP_CNT 5 ++ ++ pcie_rcu_endian_setup(pcie_port); ++ ++ pcie_ep_gpio_rst_init(pcie_port); ++ ++ /* ++ * XXX, PCIe elastic buffer bug will cause not to be detected. One more ++ * reset PCIe PHY will solve this issue ++ */ ++ for (i = 0; i < IFX_PCIE_PHY_LOOP_CNT; i++) { ++ /* Disable PCIe PHY Analog part for sanity check */ ++ pcie_phy_pmu_disable(pcie_port); ++ ++ pcie_phy_rst_assert(pcie_port); ++ pcie_phy_rst_deassert(pcie_port); ++ ++ /* Make sure PHY PLL is stable */ ++ udelay(20); ++ ++ /* PCIe Core reset enabled, low active, sw programmed */ ++ pcie_core_rst_assert(pcie_port); ++ ++ /* Put PCIe EP in reset status */ ++ pcie_device_rst_assert(pcie_port); ++ ++ /* PCI PHY & Core reset disabled, high active, sw programmed */ ++ pcie_core_rst_deassert(pcie_port); ++ ++ /* Already in a quiet state, program PLL, enable PHY, check ready bit */ ++ pcie_phy_clock_mode_setup(pcie_port); ++ ++ /* Enable PCIe PHY and Clock */ ++ pcie_core_pmu_setup(pcie_port); ++ ++ /* Clear status registers */ ++ pcie_status_register_clear(pcie_port); ++ ++#ifdef CONFIG_PCI_MSI ++ pcie_msi_init(pcie_port); ++#endif /* CONFIG_PCI_MSI */ ++ pcie_rc_cfg_reg_setup(pcie_port); ++ ++ /* Once link is up, break out */ ++ if (pcie_app_loigc_setup(pcie_port) == 0) ++ break; ++ } ++ if (i >= IFX_PCIE_PHY_LOOP_CNT) { ++ printk(KERN_ERR "%s link up failed!!!!!\n", __func__); ++ return -EIO; ++ } ++ /* NB, don't increase ACK/NACK timer timeout value, which will cause a lot of COR errors */ ++ pcie_replay_time_update(pcie_port); ++ return 0; ++} ++ ++static int __init ifx_pcie_bios_init(void) ++{ ++ void __iomem *io_map_base; ++ int pcie_port; ++ int startup_port; ++ ++ /* Enable AHB Master/ Slave */ ++ pcie_ahb_pmu_setup(); ++ ++ startup_port = IFX_PCIE_PORT0; ++ ++ for (pcie_port = startup_port; pcie_port < IFX_PCIE_CORE_NR; pcie_port++){ ++ if (pcie_rc_initialize(pcie_port) == 0) { ++ IFX_PCIE_PRINT(PCIE_MSG_INIT, "%s: ifx_pcie_cfg_base 0x%p\n", ++ __func__, PCIE_CFG_PORT_TO_BASE(pcie_port)); ++ /* Otherwise, warning will pop up */ ++ io_map_base = ioremap(PCIE_IO_PHY_PORT_TO_BASE(pcie_port), PCIE_IO_SIZE); ++ if (io_map_base == NULL) { ++ IFX_PCIE_PRINT(PCIE_MSG_ERR, "%s io space ioremap failed\n", __func__); ++ return -ENOMEM; ++ } ++ ifx_pcie_controller[pcie_port].pcic.io_map_base = (unsigned long)io_map_base; ++ ++ register_pci_controller(&ifx_pcie_controller[pcie_port].pcic); ++ /* XXX, clear error status */ ++ ++ IFX_PCIE_PRINT(PCIE_MSG_INIT, "%s: mem_resource 0x%p, io_resource 0x%p\n", ++ __func__, &ifx_pcie_controller[pcie_port].pcic.mem_resource, ++ &ifx_pcie_controller[pcie_port].pcic.io_resource); ++ ++ #ifdef IFX_PCIE_ERROR_INT ++ pcie_rc_core_int_init(pcie_port); ++ #endif /* IFX_PCIE_ERROR_INT */ ++ } ++ } ++ ++ return 0; ++} ++arch_initcall(ifx_pcie_bios_init); ++ ++MODULE_LICENSE("GPL"); ++MODULE_AUTHOR("Chuanhua.Lei@infineon.com"); ++MODULE_SUPPORTED_DEVICE("Infineon builtin PCIe RC module"); ++MODULE_DESCRIPTION("Infineon builtin PCIe RC driver"); ++ +--- /dev/null ++++ b/arch/mips/pci/ifxmips_pcie.h +@@ -0,0 +1,135 @@ ++/****************************************************************************** ++** ++** FILE NAME : ifxmips_pcie.h ++** PROJECT : IFX UEIP for VRX200 ++** MODULES : PCIe module ++** ++** DATE : 02 Mar 2009 ++** AUTHOR : Lei Chuanhua ++** DESCRIPTION : PCIe Root Complex Driver ++** COPYRIGHT : Copyright (c) 2009 ++** Infineon Technologies AG ++** Am Campeon 1-12, 85579 Neubiberg, Germany ++** ++** This program is free software; you can redistribute it and/or modify ++** it under the terms of the GNU General Public License as published by ++** the Free Software Foundation; either version 2 of the License, or ++** (at your option) any later version. ++** HISTORY ++** $Version $Date $Author $Comment ++** 0.0.1 17 Mar,2009 Lei Chuanhua Initial version ++*******************************************************************************/ ++#ifndef IFXMIPS_PCIE_H ++#define IFXMIPS_PCIE_H ++#include ++#include ++#include ++#include ++#include "ifxmips_pci_common.h" ++#include "ifxmips_pcie_reg.h" ++ ++/*! ++ \defgroup IFX_PCIE PCI Express bus driver module ++ \brief PCI Express IP module support VRX200 ++*/ ++ ++/*! ++ \defgroup IFX_PCIE_OS OS APIs ++ \ingroup IFX_PCIE ++ \brief PCIe bus driver OS interface functions ++*/ ++ ++/*! ++ \file ifxmips_pcie.h ++ \ingroup IFX_PCIE ++ \brief header file for PCIe module common header file ++*/ ++#define PCIE_IRQ_LOCK(lock) do { \ ++ unsigned long flags; \ ++ spin_lock_irqsave(&(lock), flags); ++#define PCIE_IRQ_UNLOCK(lock) \ ++ spin_unlock_irqrestore(&(lock), flags); \ ++} while (0) ++ ++#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,18) ++#define IRQF_SHARED SA_SHIRQ ++#endif ++ ++#define PCIE_MSG_MSI 0x00000001 ++#define PCIE_MSG_ISR 0x00000002 ++#define PCIE_MSG_FIXUP 0x00000004 ++#define PCIE_MSG_READ_CFG 0x00000008 ++#define PCIE_MSG_WRITE_CFG 0x00000010 ++#define PCIE_MSG_CFG (PCIE_MSG_READ_CFG | PCIE_MSG_WRITE_CFG) ++#define PCIE_MSG_REG 0x00000020 ++#define PCIE_MSG_INIT 0x00000040 ++#define PCIE_MSG_ERR 0x00000080 ++#define PCIE_MSG_PHY 0x00000100 ++#define PCIE_MSG_ANY 0x000001ff ++ ++#define IFX_PCIE_PORT0 0 ++#define IFX_PCIE_PORT1 1 ++ ++#ifdef CONFIG_IFX_PCIE_2ND_CORE ++#define IFX_PCIE_CORE_NR 2 ++#else ++#define IFX_PCIE_CORE_NR 1 ++#endif ++ ++#define IFX_PCIE_ERROR_INT ++ ++//#define IFX_PCIE_DBG ++ ++#if defined(IFX_PCIE_DBG) ++#define IFX_PCIE_PRINT(_m, _fmt, args...) do { \ ++ ifx_pcie_debug((_fmt), ##args); \ ++} while (0) ++ ++#define INLINE ++#else ++#define IFX_PCIE_PRINT(_m, _fmt, args...) \ ++ do {} while(0) ++#define INLINE inline ++#endif ++ ++struct ifx_pci_controller { ++ struct pci_controller pcic; ++ ++ /* RC specific, per host bus information */ ++ u32 port; /* Port index, 0 -- 1st core, 1 -- 2nd core */ ++}; ++ ++typedef struct ifx_pcie_ir_irq { ++ const unsigned int irq; ++ const char name[16]; ++}ifx_pcie_ir_irq_t; ++ ++typedef struct ifx_pcie_legacy_irq{ ++ const u32 irq_bit; ++ const int irq; ++}ifx_pcie_legacy_irq_t; ++ ++typedef struct ifx_pcie_irq { ++ ifx_pcie_ir_irq_t ir_irq; ++ ifx_pcie_legacy_irq_t legacy_irq[PCIE_LEGACY_INT_MAX]; ++}ifx_pcie_irq_t; ++ ++extern u32 g_pcie_debug_flag; ++extern void ifx_pcie_debug(const char *fmt, ...); ++extern void pcie_phy_clock_mode_setup(int pcie_port); ++extern void pcie_msi_pic_init(int pcie_port); ++extern u32 ifx_pcie_bus_enum_read_hack(int where, u32 value); ++extern u32 ifx_pcie_bus_enum_write_hack(int where, u32 value); ++ ++#define CONFIG_VR9 ++ ++#ifdef CONFIG_VR9 ++#include "ifxmips_pcie_vr9.h" ++#elif defined (CONFIG_AR10) ++#include "ifxmips_pcie_ar10.h" ++#else ++#error "PCIE: platform not defined" ++#endif /* CONFIG_VR9 */ ++ ++#endif /* IFXMIPS_PCIE_H */ ++ +--- /dev/null ++++ b/arch/mips/pci/ifxmips_pcie_ar10.h +@@ -0,0 +1,290 @@ ++/**************************************************************************** ++ Copyright (c) 2010 ++ Lantiq Deutschland GmbH ++ Am Campeon 3; 85579 Neubiberg, Germany ++ ++ For licensing information, see the file 'LICENSE' in the root folder of ++ this software module. ++ ++ *****************************************************************************/ ++/*! ++ \file ifxmips_pcie_ar10.h ++ \ingroup IFX_PCIE ++ \brief PCIe RC driver ar10 specific file ++*/ ++ ++#ifndef IFXMIPS_PCIE_AR10_H ++#define IFXMIPS_PCIE_AR10_H ++#ifndef AUTOCONF_INCLUDED ++#include ++#endif /* AUTOCONF_INCLUDED */ ++#include ++#include ++ ++/* Project header file */ ++#include ++#include ++#include ++#include ++ ++static inline void pcie_ep_gpio_rst_init(int pcie_port) ++{ ++ ifx_ebu_led_enable(); ++ if (pcie_port == 0) { ++ ifx_ebu_led_set_data(11, 1); ++ } ++ else { ++ ifx_ebu_led_set_data(12, 1); ++ } ++} ++ ++static inline void pcie_ahb_pmu_setup(void) ++{ ++ /* XXX, moved to CGU to control AHBM */ ++} ++ ++static inline void pcie_rcu_endian_setup(int pcie_port) ++{ ++ u32 reg; ++ ++ reg = IFX_REG_R32(IFX_RCU_AHB_ENDIAN); ++ /* Inbound, big endian */ ++ reg |= IFX_RCU_BE_AHB4S; ++ if (pcie_port == 0) { ++ reg |= IFX_RCU_BE_PCIE0M; ++ ++ #ifdef CONFIG_IFX_PCIE_HW_SWAP ++ /* Outbound, software swap needed */ ++ reg |= IFX_RCU_BE_AHB3M; ++ reg &= ~IFX_RCU_BE_PCIE0S; ++ #else ++ /* Outbound little endian */ ++ reg &= ~IFX_RCU_BE_AHB3M; ++ reg &= ~IFX_RCU_BE_PCIE0S; ++ #endif ++ } ++ else { ++ reg |= IFX_RCU_BE_PCIE1M; ++ #ifdef CONFIG_IFX_PCIE1_HW_SWAP ++ /* Outbound, software swap needed */ ++ reg |= IFX_RCU_BE_AHB3M; ++ reg &= ~IFX_RCU_BE_PCIE1S; ++ #else ++ /* Outbound little endian */ ++ reg &= ~IFX_RCU_BE_AHB3M; ++ reg &= ~IFX_RCU_BE_PCIE1S; ++ #endif ++ } ++ ++ IFX_REG_W32(reg, IFX_RCU_AHB_ENDIAN); ++ IFX_PCIE_PRINT(PCIE_MSG_REG, "%s IFX_RCU_AHB_ENDIAN: 0x%08x\n", __func__, IFX_REG_R32(IFX_RCU_AHB_ENDIAN)); ++} ++ ++static inline void pcie_phy_pmu_enable(int pcie_port) ++{ ++ if (pcie_port == 0) { /* XXX, should use macro*/ ++ PCIE0_PHY_PMU_SETUP(IFX_PMU_ENABLE); ++ } ++ else { ++ PCIE1_PHY_PMU_SETUP(IFX_PMU_ENABLE); ++ } ++} ++ ++static inline void pcie_phy_pmu_disable(int pcie_port) ++{ ++ if (pcie_port == 0) { /* XXX, should use macro*/ ++ PCIE0_PHY_PMU_SETUP(IFX_PMU_DISABLE); ++ } ++ else { ++ PCIE1_PHY_PMU_SETUP(IFX_PMU_DISABLE); ++ } ++} ++ ++static inline void pcie_pdi_big_endian(int pcie_port) ++{ ++ u32 reg; ++ ++ reg = IFX_REG_R32(IFX_RCU_AHB_ENDIAN); ++ if (pcie_port == 0) { ++ /* Config AHB->PCIe and PDI endianness */ ++ reg |= IFX_RCU_BE_PCIE0_PDI; ++ } ++ else { ++ /* Config AHB->PCIe and PDI endianness */ ++ reg |= IFX_RCU_BE_PCIE1_PDI; ++ } ++ IFX_REG_W32(reg, IFX_RCU_AHB_ENDIAN); ++} ++ ++static inline void pcie_pdi_pmu_enable(int pcie_port) ++{ ++ if (pcie_port == 0) { ++ /* Enable PDI to access PCIe PHY register */ ++ PDI0_PMU_SETUP(IFX_PMU_ENABLE); ++ } ++ else { ++ PDI1_PMU_SETUP(IFX_PMU_ENABLE); ++ } ++} ++ ++static inline void pcie_core_rst_assert(int pcie_port) ++{ ++ u32 reg; ++ ++ reg = IFX_REG_R32(IFX_RCU_RST_REQ); ++ ++ /* Reset Core, bit 22 */ ++ if (pcie_port == 0) { ++ reg |= 0x00400000; ++ } ++ else { ++ reg |= 0x08000000; /* Bit 27 */ ++ } ++ IFX_REG_W32(reg, IFX_RCU_RST_REQ); ++} ++ ++static inline void pcie_core_rst_deassert(int pcie_port) ++{ ++ u32 reg; ++ ++ /* Make sure one micro-second delay */ ++ udelay(1); ++ ++ reg = IFX_REG_R32(IFX_RCU_RST_REQ); ++ if (pcie_port == 0) { ++ reg &= ~0x00400000; /* bit 22 */ ++ } ++ else { ++ reg &= ~0x08000000; /* Bit 27 */ ++ } ++ IFX_REG_W32(reg, IFX_RCU_RST_REQ); ++} ++ ++static inline void pcie_phy_rst_assert(int pcie_port) ++{ ++ u32 reg; ++ ++ reg = IFX_REG_R32(IFX_RCU_RST_REQ); ++ if (pcie_port == 0) { ++ reg |= 0x00001000; /* Bit 12 */ ++ } ++ else { ++ reg |= 0x00002000; /* Bit 13 */ ++ } ++ IFX_REG_W32(reg, IFX_RCU_RST_REQ); ++} ++ ++static inline void pcie_phy_rst_deassert(int pcie_port) ++{ ++ u32 reg; ++ ++ /* Make sure one micro-second delay */ ++ udelay(1); ++ ++ reg = IFX_REG_R32(IFX_RCU_RST_REQ); ++ if (pcie_port == 0) { ++ reg &= ~0x00001000; /* Bit 12 */ ++ } ++ else { ++ reg &= ~0x00002000; /* Bit 13 */ ++ } ++ IFX_REG_W32(reg, IFX_RCU_RST_REQ); ++} ++ ++static inline void pcie_device_rst_assert(int pcie_port) ++{ ++ if (pcie_port == 0) { ++ ifx_ebu_led_set_data(11, 0); ++ } ++ else { ++ ifx_ebu_led_set_data(12, 0); ++ } ++} ++ ++static inline void pcie_device_rst_deassert(int pcie_port) ++{ ++ mdelay(100); ++ if (pcie_port == 0) { ++ ifx_ebu_led_set_data(11, 1); ++ } ++ else { ++ ifx_ebu_led_set_data(12, 1); ++ } ++ ifx_ebu_led_disable(); ++} ++ ++static inline void pcie_core_pmu_setup(int pcie_port) ++{ ++ if (pcie_port == 0) { ++ PCIE0_CTRL_PMU_SETUP(IFX_PMU_ENABLE); ++ } ++ else { ++ PCIE1_CTRL_PMU_SETUP(IFX_PMU_ENABLE); ++ } ++} ++ ++static inline void pcie_msi_init(int pcie_port) ++{ ++ pcie_msi_pic_init(pcie_port); ++ if (pcie_port == 0) { ++ MSI0_PMU_SETUP(IFX_PMU_ENABLE); ++ } ++ else { ++ MSI1_PMU_SETUP(IFX_PMU_ENABLE); ++ } ++} ++ ++static inline u32 ++ifx_pcie_bus_nr_deduct(u32 bus_number, int pcie_port) ++{ ++ u32 tbus_number = bus_number; ++ ++#ifdef CONFIG_IFX_PCIE_2ND_CORE ++ if (pcie_port == IFX_PCIE_PORT1) { /* Port 1 must check if there are two cores enabled */ ++ if (pcibios_host_nr() > 1) { ++ tbus_number -= pcibios_1st_host_bus_nr(); ++ } ++ } ++#endif /* CONFIG_IFX_PCI */ ++ return tbus_number; ++} ++ ++static inline u32 ++ifx_pcie_bus_enum_hack(struct pci_bus *bus, u32 devfn, int where, u32 value, int pcie_port, int read) ++{ ++ struct pci_dev *pdev; ++ u32 tvalue = value; ++ ++ /* Sanity check */ ++ pdev = pci_get_slot(bus, devfn); ++ if (pdev == NULL) { ++ return tvalue; ++ } ++ ++ /* Only care about PCI bridge */ ++ if (pdev->hdr_type != PCI_HEADER_TYPE_BRIDGE) { ++ return tvalue; ++ } ++ ++ if (read) { /* Read hack */ ++ #ifdef CONFIG_IFX_PCIE_2ND_CORE ++ if (pcie_port == IFX_PCIE_PORT1) { /* Port 1 must check if there are two cores enabled */ ++ if (pcibios_host_nr() > 1) { ++ tvalue = ifx_pcie_bus_enum_read_hack(where, tvalue); ++ } ++ } ++ #endif /* CONFIG_IFX_PCIE_2ND_CORE */ ++ } ++ else { /* Write hack */ ++ #ifdef CONFIG_IFX_PCIE_2ND_CORE ++ if (pcie_port == IFX_PCIE_PORT1) { /* Port 1 must check if there are two cores enabled */ ++ if (pcibios_host_nr() > 1) { ++ tvalue = ifx_pcie_bus_enum_write_hack(where, tvalue); ++ } ++ } ++ #endif ++ } ++ return tvalue; ++} ++ ++#endif /* IFXMIPS_PCIE_AR10_H */ +--- /dev/null ++++ b/arch/mips/pci/ifxmips_pcie_msi.c +@@ -0,0 +1,392 @@ ++/****************************************************************************** ++** ++** FILE NAME : ifxmips_pcie_msi.c ++** PROJECT : IFX UEIP for VRX200 ++** MODULES : PCI MSI sub module ++** ++** DATE : 02 Mar 2009 ++** AUTHOR : Lei Chuanhua ++** DESCRIPTION : PCIe MSI Driver ++** COPYRIGHT : Copyright (c) 2009 ++** Infineon Technologies AG ++** Am Campeon 1-12, 85579 Neubiberg, Germany ++** ++** This program is free software; you can redistribute it and/or modify ++** it under the terms of the GNU General Public License as published by ++** the Free Software Foundation; either version 2 of the License, or ++** (at your option) any later version. ++** HISTORY ++** $Date $Author $Comment ++** 02 Mar,2009 Lei Chuanhua Initial version ++*******************************************************************************/ ++/*! ++ \defgroup IFX_PCIE_MSI MSI OS APIs ++ \ingroup IFX_PCIE ++ \brief PCIe bus driver OS interface functions ++*/ ++ ++/*! ++ \file ifxmips_pcie_msi.c ++ \ingroup IFX_PCIE ++ \brief PCIe MSI OS interface file ++*/ ++ ++#ifndef AUTOCONF_INCLUDED ++#include ++#endif /* AUTOCONF_INCLUDED */ ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++ ++#include ++#include ++#include ++#include ++ ++#include "ifxmips_pcie_reg.h" ++#include "ifxmips_pcie.h" ++ ++#define IFX_MSI_IRQ_NUM 16 ++ ++enum { ++ IFX_PCIE_MSI_IDX0 = 0, ++ IFX_PCIE_MSI_IDX1, ++ IFX_PCIE_MSI_IDX2, ++ IFX_PCIE_MSI_IDX3, ++}; ++ ++typedef struct ifx_msi_irq_idx { ++ const int irq; ++ const int idx; ++}ifx_msi_irq_idx_t; ++ ++struct ifx_msi_pic { ++ volatile u32 pic_table[IFX_MSI_IRQ_NUM]; ++ volatile u32 pic_endian; /* 0x40 */ ++}; ++typedef struct ifx_msi_pic *ifx_msi_pic_t; ++ ++typedef struct ifx_msi_irq { ++ const volatile ifx_msi_pic_t msi_pic_p; ++ const u32 msi_phy_base; ++ const ifx_msi_irq_idx_t msi_irq_idx[IFX_MSI_IRQ_NUM]; ++ /* ++ * Each bit in msi_free_irq_bitmask represents a MSI interrupt that is ++ * in use. ++ */ ++ u16 msi_free_irq_bitmask; ++ ++ /* ++ * Each bit in msi_multiple_irq_bitmask tells that the device using ++ * this bit in msi_free_irq_bitmask is also using the next bit. This ++ * is used so we can disable all of the MSI interrupts when a device ++ * uses multiple. ++ */ ++ u16 msi_multiple_irq_bitmask; ++}ifx_msi_irq_t; ++ ++static ifx_msi_irq_t msi_irqs[IFX_PCIE_CORE_NR] = { ++ { ++ .msi_pic_p = (const volatile ifx_msi_pic_t)IFX_MSI_PIC_REG_BASE, ++ .msi_phy_base = PCIE_MSI_PHY_BASE, ++ .msi_irq_idx = { ++ {IFX_PCIE_MSI_IR0, IFX_PCIE_MSI_IDX0}, {IFX_PCIE_MSI_IR1, IFX_PCIE_MSI_IDX1}, ++ {IFX_PCIE_MSI_IR2, IFX_PCIE_MSI_IDX2}, {IFX_PCIE_MSI_IR3, IFX_PCIE_MSI_IDX3}, ++ {IFX_PCIE_MSI_IR0, IFX_PCIE_MSI_IDX0}, {IFX_PCIE_MSI_IR1, IFX_PCIE_MSI_IDX1}, ++ {IFX_PCIE_MSI_IR2, IFX_PCIE_MSI_IDX2}, {IFX_PCIE_MSI_IR3, IFX_PCIE_MSI_IDX3}, ++ {IFX_PCIE_MSI_IR0, IFX_PCIE_MSI_IDX0}, {IFX_PCIE_MSI_IR1, IFX_PCIE_MSI_IDX1}, ++ {IFX_PCIE_MSI_IR2, IFX_PCIE_MSI_IDX2}, {IFX_PCIE_MSI_IR3, IFX_PCIE_MSI_IDX3}, ++ {IFX_PCIE_MSI_IR0, IFX_PCIE_MSI_IDX0}, {IFX_PCIE_MSI_IR1, IFX_PCIE_MSI_IDX1}, ++ {IFX_PCIE_MSI_IR2, IFX_PCIE_MSI_IDX2}, {IFX_PCIE_MSI_IR3, IFX_PCIE_MSI_IDX3}, ++ }, ++ .msi_free_irq_bitmask = 0, ++ .msi_multiple_irq_bitmask= 0, ++ }, ++#ifdef CONFIG_IFX_PCIE_2ND_CORE ++ { ++ .msi_pic_p = (const volatile ifx_msi_pic_t)IFX_MSI1_PIC_REG_BASE, ++ .msi_phy_base = PCIE1_MSI_PHY_BASE, ++ .msi_irq_idx = { ++ {IFX_PCIE1_MSI_IR0, IFX_PCIE_MSI_IDX0}, {IFX_PCIE1_MSI_IR1, IFX_PCIE_MSI_IDX1}, ++ {IFX_PCIE1_MSI_IR2, IFX_PCIE_MSI_IDX2}, {IFX_PCIE1_MSI_IR3, IFX_PCIE_MSI_IDX3}, ++ {IFX_PCIE1_MSI_IR0, IFX_PCIE_MSI_IDX0}, {IFX_PCIE1_MSI_IR1, IFX_PCIE_MSI_IDX1}, ++ {IFX_PCIE1_MSI_IR2, IFX_PCIE_MSI_IDX2}, {IFX_PCIE1_MSI_IR3, IFX_PCIE_MSI_IDX3}, ++ {IFX_PCIE1_MSI_IR0, IFX_PCIE_MSI_IDX0}, {IFX_PCIE1_MSI_IR1, IFX_PCIE_MSI_IDX1}, ++ {IFX_PCIE1_MSI_IR2, IFX_PCIE_MSI_IDX2}, {IFX_PCIE1_MSI_IR3, IFX_PCIE_MSI_IDX3}, ++ {IFX_PCIE1_MSI_IR0, IFX_PCIE_MSI_IDX0}, {IFX_PCIE1_MSI_IR1, IFX_PCIE_MSI_IDX1}, ++ {IFX_PCIE1_MSI_IR2, IFX_PCIE_MSI_IDX2}, {IFX_PCIE1_MSI_IR3, IFX_PCIE_MSI_IDX3}, ++ }, ++ .msi_free_irq_bitmask = 0, ++ .msi_multiple_irq_bitmask= 0, ++ ++ }, ++#endif /* CONFIG_IFX_PCIE_2ND_CORE */ ++}; ++ ++/* ++ * This lock controls updates to msi_free_irq_bitmask, ++ * msi_multiple_irq_bitmask and pic register settting ++ */ ++static DEFINE_SPINLOCK(ifx_pcie_msi_lock); ++ ++void pcie_msi_pic_init(int pcie_port) ++{ ++ spin_lock(&ifx_pcie_msi_lock); ++ msi_irqs[pcie_port].msi_pic_p->pic_endian = IFX_MSI_PIC_BIG_ENDIAN; ++ spin_unlock(&ifx_pcie_msi_lock); ++} ++ ++/** ++ * \fn int arch_setup_msi_irq(struct pci_dev *pdev, struct msi_desc *desc) ++ * \brief Called when a driver request MSI interrupts instead of the ++ * legacy INT A-D. This routine will allocate multiple interrupts ++ * for MSI devices that support them. A device can override this by ++ * programming the MSI control bits [6:4] before calling ++ * pci_enable_msi(). ++ * ++ * \param[in] pdev Device requesting MSI interrupts ++ * \param[in] desc MSI descriptor ++ * ++ * \return -EINVAL Invalid pcie root port or invalid msi bit ++ * \return 0 OK ++ * \ingroup IFX_PCIE_MSI ++ */ ++int ++arch_setup_msi_irq(struct pci_dev *pdev, struct msi_desc *desc) ++{ ++ int irq, pos; ++ u16 control; ++ int irq_idx; ++ int irq_step; ++ int configured_private_bits; ++ int request_private_bits; ++ struct msi_msg msg; ++ u16 search_mask; ++ struct ifx_pci_controller *ctrl = pdev->bus->sysdata; ++ int pcie_port = ctrl->port; ++ ++ IFX_PCIE_PRINT(PCIE_MSG_MSI, "%s %s enter\n", __func__, pci_name(pdev)); ++ ++ /* XXX, skip RC MSI itself */ ++ if (pdev->pcie_type == PCI_EXP_TYPE_ROOT_PORT) { ++ IFX_PCIE_PRINT(PCIE_MSG_MSI, "%s RC itself doesn't use MSI interrupt\n", __func__); ++ return -EINVAL; ++ } ++ ++ /* ++ * Read the MSI config to figure out how many IRQs this device ++ * wants. Most devices only want 1, which will give ++ * configured_private_bits and request_private_bits equal 0. ++ */ ++ pci_read_config_word(pdev, desc->msi_attrib.pos + PCI_MSI_FLAGS, &control); ++ ++ /* ++ * If the number of private bits has been configured then use ++ * that value instead of the requested number. This gives the ++ * driver the chance to override the number of interrupts ++ * before calling pci_enable_msi(). ++ */ ++ configured_private_bits = (control & PCI_MSI_FLAGS_QSIZE) >> 4; ++ if (configured_private_bits == 0) { ++ /* Nothing is configured, so use the hardware requested size */ ++ request_private_bits = (control & PCI_MSI_FLAGS_QMASK) >> 1; ++ } ++ else { ++ /* ++ * Use the number of configured bits, assuming the ++ * driver wanted to override the hardware request ++ * value. ++ */ ++ request_private_bits = configured_private_bits; ++ } ++ ++ /* ++ * The PCI 2.3 spec mandates that there are at most 32 ++ * interrupts. If this device asks for more, only give it one. ++ */ ++ if (request_private_bits > 5) { ++ request_private_bits = 0; ++ } ++again: ++ /* ++ * The IRQs have to be aligned on a power of two based on the ++ * number being requested. ++ */ ++ irq_step = (1 << request_private_bits); ++ ++ /* Mask with one bit for each IRQ */ ++ search_mask = (1 << irq_step) - 1; ++ ++ /* ++ * We're going to search msi_free_irq_bitmask_lock for zero ++ * bits. This represents an MSI interrupt number that isn't in ++ * use. ++ */ ++ spin_lock(&ifx_pcie_msi_lock); ++ for (pos = 0; pos < IFX_MSI_IRQ_NUM; pos += irq_step) { ++ if ((msi_irqs[pcie_port].msi_free_irq_bitmask & (search_mask << pos)) == 0) { ++ msi_irqs[pcie_port].msi_free_irq_bitmask |= search_mask << pos; ++ msi_irqs[pcie_port].msi_multiple_irq_bitmask |= (search_mask >> 1) << pos; ++ break; ++ } ++ } ++ spin_unlock(&ifx_pcie_msi_lock); ++ ++ /* Make sure the search for available interrupts didn't fail */ ++ if (pos >= IFX_MSI_IRQ_NUM) { ++ if (request_private_bits) { ++ IFX_PCIE_PRINT(PCIE_MSG_MSI, "%s: Unable to find %d free " ++ "interrupts, trying just one", __func__, 1 << request_private_bits); ++ request_private_bits = 0; ++ goto again; ++ } ++ else { ++ printk(KERN_ERR "%s: Unable to find a free MSI interrupt\n", __func__); ++ return -EINVAL; ++ } ++ } ++ irq = msi_irqs[pcie_port].msi_irq_idx[pos].irq; ++ irq_idx = msi_irqs[pcie_port].msi_irq_idx[pos].idx; ++ ++ IFX_PCIE_PRINT(PCIE_MSG_MSI, "pos %d, irq %d irq_idx %d\n", pos, irq, irq_idx); ++ ++ /* ++ * Initialize MSI. This has to match the memory-write endianess from the device ++ * Address bits [23:12] ++ */ ++ spin_lock(&ifx_pcie_msi_lock); ++ msi_irqs[pcie_port].msi_pic_p->pic_table[pos] = SM(irq_idx, IFX_MSI_PIC_INT_LINE) | ++ SM((msi_irqs[pcie_port].msi_phy_base >> 12), IFX_MSI_PIC_MSG_ADDR) | ++ SM((1 << pos), IFX_MSI_PIC_MSG_DATA); ++ ++ /* Enable this entry */ ++ msi_irqs[pcie_port].msi_pic_p->pic_table[pos] &= ~IFX_MSI_PCI_INT_DISABLE; ++ spin_unlock(&ifx_pcie_msi_lock); ++ ++ IFX_PCIE_PRINT(PCIE_MSG_MSI, "pic_table[%d]: 0x%08x\n", ++ pos, msi_irqs[pcie_port].msi_pic_p->pic_table[pos]); ++ ++ /* Update the number of IRQs the device has available to it */ ++ control &= ~PCI_MSI_FLAGS_QSIZE; ++ control |= (request_private_bits << 4); ++ pci_write_config_word(pdev, desc->msi_attrib.pos + PCI_MSI_FLAGS, control); ++ ++ set_irq_msi(irq, desc); ++ msg.address_hi = 0x0; ++ msg.address_lo = msi_irqs[pcie_port].msi_phy_base; ++ msg.data = SM((1 << pos), IFX_MSI_PIC_MSG_DATA); ++ IFX_PCIE_PRINT(PCIE_MSG_MSI, "msi_data: pos %d 0x%08x\n", pos, msg.data); ++ ++ write_msi_msg(irq, &msg); ++ IFX_PCIE_PRINT(PCIE_MSG_MSI, "%s exit\n", __func__); ++ return 0; ++} ++ ++static int ++pcie_msi_irq_to_port(unsigned int irq, int *port) ++{ ++ int ret = 0; ++ ++ if (irq == IFX_PCIE_MSI_IR0 || irq == IFX_PCIE_MSI_IR1 || ++ irq == IFX_PCIE_MSI_IR2 || irq == IFX_PCIE_MSI_IR3) { ++ *port = IFX_PCIE_PORT0; ++ } ++#ifdef CONFIG_IFX_PCIE_2ND_CORE ++ else if (irq == IFX_PCIE1_MSI_IR0 || irq == IFX_PCIE1_MSI_IR1 || ++ irq == IFX_PCIE1_MSI_IR2 || irq == IFX_PCIE1_MSI_IR3) { ++ *port = IFX_PCIE_PORT1; ++ } ++#endif /* CONFIG_IFX_PCIE_2ND_CORE */ ++ else { ++ printk(KERN_ERR "%s: Attempted to teardown illegal " ++ "MSI interrupt (%d)\n", __func__, irq); ++ ret = -EINVAL; ++ } ++ return ret; ++} ++ ++/** ++ * \fn void arch_teardown_msi_irq(unsigned int irq) ++ * \brief Called when a device no longer needs its MSI interrupts. All ++ * MSI interrupts for the device are freed. ++ * ++ * \param irq The devices first irq number. There may be multple in sequence. ++ * \return none ++ * \ingroup IFX_PCIE_MSI ++ */ ++void ++arch_teardown_msi_irq(unsigned int irq) ++{ ++ int pos; ++ int number_irqs; ++ u16 bitmask; ++ int pcie_port; ++ ++ IFX_PCIE_PRINT(PCIE_MSG_MSI, "%s enter\n", __func__); ++ ++ BUG_ON(irq > INT_NUM_IM4_IRL31); ++ ++ if (pcie_msi_irq_to_port(irq, &pcie_port) != 0) { ++ return; ++ } ++ ++ /* Shift the mask to the correct bit location, not always correct ++ * Probally, the first match will be chosen. ++ */ ++ for (pos = 0; pos < IFX_MSI_IRQ_NUM; pos++) { ++ if ((msi_irqs[pcie_port].msi_irq_idx[pos].irq == irq) ++ && (msi_irqs[pcie_port].msi_free_irq_bitmask & ( 1 << pos))) { ++ break; ++ } ++ } ++ if (pos >= IFX_MSI_IRQ_NUM) { ++ printk(KERN_ERR "%s: Unable to find a matched MSI interrupt\n", __func__); ++ return; ++ } ++ spin_lock(&ifx_pcie_msi_lock); ++ /* Disable this entry */ ++ msi_irqs[pcie_port].msi_pic_p->pic_table[pos] |= IFX_MSI_PCI_INT_DISABLE; ++ msi_irqs[pcie_port].msi_pic_p->pic_table[pos] &= ~(IFX_MSI_PIC_INT_LINE | IFX_MSI_PIC_MSG_ADDR | IFX_MSI_PIC_MSG_DATA); ++ spin_unlock(&ifx_pcie_msi_lock); ++ /* ++ * Count the number of IRQs we need to free by looking at the ++ * msi_multiple_irq_bitmask. Each bit set means that the next ++ * IRQ is also owned by this device. ++ */ ++ number_irqs = 0; ++ while (((pos + number_irqs) < IFX_MSI_IRQ_NUM) && ++ (msi_irqs[pcie_port].msi_multiple_irq_bitmask & (1 << (pos + number_irqs)))) { ++ number_irqs++; ++ } ++ number_irqs++; ++ ++ /* Mask with one bit for each IRQ */ ++ bitmask = (1 << number_irqs) - 1; ++ ++ bitmask <<= pos; ++ if ((msi_irqs[pcie_port].msi_free_irq_bitmask & bitmask) != bitmask) { ++ printk(KERN_ERR "%s: Attempted to teardown MSI " ++ "interrupt (%d) not in use\n", __func__, irq); ++ return; ++ } ++ /* Checks are done, update the in use bitmask */ ++ spin_lock(&ifx_pcie_msi_lock); ++ msi_irqs[pcie_port].msi_free_irq_bitmask &= ~bitmask; ++ msi_irqs[pcie_port].msi_multiple_irq_bitmask &= ~(bitmask >> 1); ++ spin_unlock(&ifx_pcie_msi_lock); ++ IFX_PCIE_PRINT(PCIE_MSG_MSI, "%s exit\n", __func__); ++} ++ ++MODULE_LICENSE("GPL"); ++MODULE_AUTHOR("Chuanhua.Lei@infineon.com"); ++MODULE_SUPPORTED_DEVICE("Infineon PCIe IP builtin MSI PIC module"); ++MODULE_DESCRIPTION("Infineon PCIe IP builtin MSI PIC driver"); ++ +--- /dev/null ++++ b/arch/mips/pci/ifxmips_pcie_phy.c +@@ -0,0 +1,478 @@ ++/****************************************************************************** ++** ++** FILE NAME : ifxmips_pcie_phy.c ++** PROJECT : IFX UEIP for VRX200 ++** MODULES : PCIe PHY sub module ++** ++** DATE : 14 May 2009 ++** AUTHOR : Lei Chuanhua ++** DESCRIPTION : PCIe Root Complex Driver ++** COPYRIGHT : Copyright (c) 2009 ++** Infineon Technologies AG ++** Am Campeon 1-12, 85579 Neubiberg, Germany ++** ++** This program is free software; you can redistribute it and/or modify ++** it under the terms of the GNU General Public License as published by ++** the Free Software Foundation; either version 2 of the License, or ++** (at your option) any later version. ++** HISTORY ++** $Version $Date $Author $Comment ++** 0.0.1 14 May,2009 Lei Chuanhua Initial version ++*******************************************************************************/ ++/*! ++ \file ifxmips_pcie_phy.c ++ \ingroup IFX_PCIE ++ \brief PCIe PHY PLL register programming source file ++*/ ++#include ++#include ++#include ++#include ++ ++#include "ifxmips_pcie_reg.h" ++#include "ifxmips_pcie.h" ++ ++/* PCIe PDI only supports 16 bit operation */ ++ ++#define IFX_PCIE_PHY_REG_WRITE16(__addr, __data) \ ++ ((*(volatile u16 *) (__addr)) = (__data)) ++ ++#define IFX_PCIE_PHY_REG_READ16(__addr) \ ++ (*(volatile u16 *) (__addr)) ++ ++#define IFX_PCIE_PHY_REG16(__addr) \ ++ (*(volatile u16 *) (__addr)) ++ ++#define IFX_PCIE_PHY_REG(__reg, __value, __mask) do { \ ++ u16 read_data; \ ++ u16 write_data; \ ++ read_data = IFX_PCIE_PHY_REG_READ16((__reg)); \ ++ write_data = (read_data & ((u16)~(__mask))) | (((u16)(__value)) & ((u16)(__mask)));\ ++ IFX_PCIE_PHY_REG_WRITE16((__reg), write_data); \ ++} while (0) ++ ++#define IFX_PCIE_PLL_TIMEOUT 1000 /* Tunnable */ ++ ++//#define IFX_PCI_PHY_REG_DUMP ++ ++#ifdef IFX_PCI_PHY_REG_DUMP ++static void ++pcie_phy_reg_dump(int pcie_port) ++{ ++ printk("PLL REGFILE\n"); ++ printk("PCIE_PHY_PLL_CTRL1 0x%04x\n", IFX_PCIE_PHY_REG16(PCIE_PHY_PLL_CTRL1(pcie_port))); ++ printk("PCIE_PHY_PLL_CTRL2 0x%04x\n", IFX_PCIE_PHY_REG16(PCIE_PHY_PLL_CTRL2(pcie_port))); ++ printk("PCIE_PHY_PLL_CTRL3 0x%04x\n", IFX_PCIE_PHY_REG16(PCIE_PHY_PLL_CTRL3(pcie_port))); ++ printk("PCIE_PHY_PLL_CTRL4 0x%04x\n", IFX_PCIE_PHY_REG16(PCIE_PHY_PLL_CTRL4(pcie_port))); ++ printk("PCIE_PHY_PLL_CTRL5 0x%04x\n", IFX_PCIE_PHY_REG16(PCIE_PHY_PLL_CTRL5(pcie_port))); ++ printk("PCIE_PHY_PLL_CTRL6 0x%04x\n", IFX_PCIE_PHY_REG16(PCIE_PHY_PLL_CTRL6(pcie_port))); ++ printk("PCIE_PHY_PLL_CTRL7 0x%04x\n", IFX_PCIE_PHY_REG16(PCIE_PHY_PLL_CTRL7(pcie_port))); ++ printk("PCIE_PHY_PLL_A_CTRL1 0x%04x\n", IFX_PCIE_PHY_REG16(PCIE_PHY_PLL_A_CTRL1(pcie_port))); ++ printk("PCIE_PHY_PLL_A_CTRL2 0x%04x\n", IFX_PCIE_PHY_REG16(PCIE_PHY_PLL_A_CTRL2(pcie_port))); ++ printk("PCIE_PHY_PLL_A_CTRL3 0x%04x\n", IFX_PCIE_PHY_REG16(PCIE_PHY_PLL_A_CTRL3(pcie_port))); ++ printk("PCIE_PHY_PLL_STATUS 0x%04x\n", IFX_PCIE_PHY_REG16(PCIE_PHY_PLL_STATUS(pcie_port))); ++ ++ printk("TX1 REGFILE\n"); ++ printk("PCIE_PHY_TX1_CTRL1 0x%04x\n", IFX_PCIE_PHY_REG16(PCIE_PHY_TX1_CTRL1(pcie_port))); ++ printk("PCIE_PHY_TX1_CTRL2 0x%04x\n", IFX_PCIE_PHY_REG16(PCIE_PHY_TX1_CTRL2(pcie_port))); ++ printk("PCIE_PHY_TX1_CTRL3 0x%04x\n", IFX_PCIE_PHY_REG16(PCIE_PHY_TX1_CTRL3(pcie_port))); ++ printk("PCIE_PHY_TX1_A_CTRL1 0x%04x\n", IFX_PCIE_PHY_REG16(PCIE_PHY_TX1_A_CTRL1(pcie_port))); ++ printk("PCIE_PHY_TX1_A_CTRL2 0x%04x\n", IFX_PCIE_PHY_REG16(PCIE_PHY_TX1_A_CTRL2(pcie_port))); ++ printk("PCIE_PHY_TX1_MOD1 0x%04x\n", IFX_PCIE_PHY_REG16(PCIE_PHY_TX1_MOD1(pcie_port))); ++ printk("PCIE_PHY_TX1_MOD2 0x%04x\n", IFX_PCIE_PHY_REG16(PCIE_PHY_TX1_MOD2(pcie_port))); ++ printk("PCIE_PHY_TX1_MOD3 0x%04x\n", IFX_PCIE_PHY_REG16(PCIE_PHY_TX1_MOD3(pcie_port))); ++ ++ printk("TX2 REGFILE\n"); ++ printk("PCIE_PHY_TX2_CTRL1 0x%04x\n", IFX_PCIE_PHY_REG16(PCIE_PHY_TX2_CTRL1(pcie_port))); ++ printk("PCIE_PHY_TX2_CTRL2 0x%04x\n", IFX_PCIE_PHY_REG16(PCIE_PHY_TX2_CTRL2(pcie_port))); ++ printk("PCIE_PHY_TX2_A_CTRL1 0x%04x\n", IFX_PCIE_PHY_REG16(PCIE_PHY_TX2_A_CTRL1(pcie_port))); ++ printk("PCIE_PHY_TX2_A_CTRL2 0x%04x\n", IFX_PCIE_PHY_REG16(PCIE_PHY_TX2_A_CTRL2(pcie_port))); ++ printk("PCIE_PHY_TX2_MOD1 0x%04x\n", IFX_PCIE_PHY_REG16(PCIE_PHY_TX2_MOD1(pcie_port))); ++ printk("PCIE_PHY_TX2_MOD2 0x%04x\n", IFX_PCIE_PHY_REG16(PCIE_PHY_TX2_MOD2(pcie_port))); ++ printk("PCIE_PHY_TX2_MOD3 0x%04x\n", IFX_PCIE_PHY_REG16(PCIE_PHY_TX2_MOD3(pcie_port))); ++ ++ printk("RX1 REGFILE\n"); ++ printk("PCIE_PHY_RX1_CTRL1 0x%04x\n", IFX_PCIE_PHY_REG16(PCIE_PHY_RX1_CTRL1(pcie_port))); ++ printk("PCIE_PHY_RX1_CTRL2 0x%04x\n", IFX_PCIE_PHY_REG16(PCIE_PHY_RX1_CTRL2(pcie_port))); ++ printk("PCIE_PHY_RX1_CDR 0x%04x\n", IFX_PCIE_PHY_REG16(PCIE_PHY_RX1_CDR(pcie_port))); ++ printk("PCIE_PHY_RX1_EI 0x%04x\n", IFX_PCIE_PHY_REG16(PCIE_PHY_RX1_EI(pcie_port))); ++ printk("PCIE_PHY_RX1_A_CTRL 0x%04x\n", IFX_PCIE_PHY_REG16(PCIE_PHY_RX1_A_CTRL(pcie_port))); ++} ++#endif /* IFX_PCI_PHY_REG_DUMP */ ++ ++static void ++pcie_phy_comm_setup(int pcie_port) ++{ ++ /* PLL Setting */ ++ IFX_PCIE_PHY_REG(PCIE_PHY_PLL_A_CTRL1(pcie_port), 0x120e, 0xFFFF); ++ ++ /* increase the bias reference voltage */ ++ IFX_PCIE_PHY_REG(PCIE_PHY_PLL_A_CTRL2(pcie_port), 0x39D7, 0xFFFF); ++ IFX_PCIE_PHY_REG(PCIE_PHY_PLL_A_CTRL3(pcie_port), 0x0900, 0xFFFF); ++ ++ /* Endcnt */ ++ IFX_PCIE_PHY_REG(PCIE_PHY_RX1_EI(pcie_port), 0x0004, 0xFFFF); ++ IFX_PCIE_PHY_REG(PCIE_PHY_RX1_A_CTRL(pcie_port), 0x6803, 0xFFFF); ++ ++ /* force */ ++ IFX_PCIE_PHY_REG(PCIE_PHY_TX1_CTRL1(pcie_port), 0x0008, 0x0008); ++ ++ /* predrv_ser_en */ ++ IFX_PCIE_PHY_REG(PCIE_PHY_TX1_A_CTRL2(pcie_port), 0x0706, 0xFFFF); ++ ++ /* ctrl_lim */ ++ IFX_PCIE_PHY_REG(PCIE_PHY_TX1_CTRL3(pcie_port), 0x1FFF, 0xFFFF); ++ ++ /* ctrl */ ++ IFX_PCIE_PHY_REG(PCIE_PHY_TX1_A_CTRL1(pcie_port), 0x0800, 0xFF00); ++ ++ /* predrv_ser_en */ ++ IFX_PCIE_PHY_REG(PCIE_PHY_TX2_A_CTRL2(pcie_port), 0x4702, 0x7F00); ++ ++ /* RTERM*/ ++ IFX_PCIE_PHY_REG(PCIE_PHY_TX1_CTRL2(pcie_port), 0x2e00, 0xFFFF); ++ ++ /* Improved 100MHz clock output */ ++ IFX_PCIE_PHY_REG(PCIE_PHY_TX2_CTRL2(pcie_port), 0x3096, 0xFFFF); ++ IFX_PCIE_PHY_REG(PCIE_PHY_TX2_A_CTRL2(pcie_port), 0x4707, 0xFFFF); ++ ++ /* Reduced CDR BW to avoid glitches */ ++ IFX_PCIE_PHY_REG(PCIE_PHY_RX1_CDR(pcie_port), 0x0235, 0xFFFF); ++} ++ ++#ifdef CONFIG_IFX_PCIE_PHY_36MHZ_MODE ++static void ++pcie_phy_36mhz_mode_setup(int pcie_port) ++{ ++ IFX_PCIE_PRINT(PCIE_MSG_PHY, "%s pcie_port %d enter\n", __func__, pcie_port); ++#ifdef IFX_PCI_PHY_REG_DUMP ++ IFX_PCIE_PRINT(PCIE_MSG_PHY, "Initial PHY register dump\n"); ++ pcie_phy_reg_dump(pcie_port); ++#endif ++ ++ /* en_ext_mmd_div_ratio */ ++ IFX_PCIE_PHY_REG(PCIE_PHY_PLL_CTRL3(pcie_port), 0x0000, 0x0002); ++ ++ /* ext_mmd_div_ratio*/ ++ IFX_PCIE_PHY_REG(PCIE_PHY_PLL_CTRL3(pcie_port), 0x0000, 0x0070); ++ ++ /* pll_ensdm */ ++ IFX_PCIE_PHY_REG(PCIE_PHY_PLL_CTRL2(pcie_port), 0x0200, 0x0200); ++ ++ /* en_const_sdm */ ++ IFX_PCIE_PHY_REG(PCIE_PHY_PLL_CTRL2(pcie_port), 0x0100, 0x0100); ++ ++ /* mmd */ ++ IFX_PCIE_PHY_REG(PCIE_PHY_PLL_A_CTRL3(pcie_port), 0x2000, 0xe000); ++ ++ /* lf_mode */ ++ IFX_PCIE_PHY_REG(PCIE_PHY_PLL_A_CTRL2(pcie_port), 0x0000, 0x4000); ++ ++ /* const_sdm */ ++ IFX_PCIE_PHY_REG(PCIE_PHY_PLL_CTRL1(pcie_port), 0x38e4, 0xFFFF); ++ ++ /* const sdm */ ++ IFX_PCIE_PHY_REG(PCIE_PHY_PLL_CTRL2(pcie_port), 0x00ee, 0x00FF); ++ ++ /* pllmod */ ++ IFX_PCIE_PHY_REG(PCIE_PHY_PLL_CTRL7(pcie_port), 0x0002, 0xFFFF); ++ IFX_PCIE_PHY_REG(PCIE_PHY_PLL_CTRL6(pcie_port), 0x3a04, 0xFFFF); ++ IFX_PCIE_PHY_REG(PCIE_PHY_PLL_CTRL5(pcie_port), 0xfae3, 0xFFFF); ++ IFX_PCIE_PHY_REG(PCIE_PHY_PLL_CTRL4(pcie_port), 0x1b72, 0xFFFF); ++ ++ IFX_PCIE_PRINT(PCIE_MSG_PHY, "%s pcie_port %d exit\n", __func__, pcie_port); ++} ++#endif /* CONFIG_IFX_PCIE_PHY_36MHZ_MODE */ ++ ++#ifdef CONFIG_IFX_PCIE_PHY_36MHZ_SSC_MODE ++static void ++pcie_phy_36mhz_ssc_mode_setup(int pcie_port) ++{ ++ IFX_PCIE_PRINT(PCIE_MSG_PHY, "%s pcie_port %d enter\n", __func__, pcie_port); ++#ifdef IFX_PCI_PHY_REG_DUMP ++ IFX_PCIE_PRINT(PCIE_MSG_PHY, "Initial PHY register dump\n"); ++ pcie_phy_reg_dump(pcie_port); ++#endif ++ ++ /* PLL Setting */ ++ IFX_PCIE_PHY_REG(PCIE_PHY_PLL_A_CTRL1(pcie_port), 0x120e, 0xFFFF); ++ ++ /* Increase the bias reference voltage */ ++ IFX_PCIE_PHY_REG(PCIE_PHY_PLL_A_CTRL2(pcie_port), 0x39D7, 0xFFFF); ++ IFX_PCIE_PHY_REG(PCIE_PHY_PLL_A_CTRL3(pcie_port), 0x0900, 0xFFFF); ++ ++ /* Endcnt */ ++ IFX_PCIE_PHY_REG(PCIE_PHY_RX1_EI(pcie_port), 0x0004, 0xFFFF); ++ IFX_PCIE_PHY_REG(PCIE_PHY_RX1_A_CTRL(pcie_port), 0x6803, 0xFFFF); ++ ++ /* Force */ ++ IFX_PCIE_PHY_REG(PCIE_PHY_TX1_CTRL1(pcie_port), 0x0008, 0x0008); ++ ++ /* Predrv_ser_en */ ++ IFX_PCIE_PHY_REG(PCIE_PHY_TX1_A_CTRL2(pcie_port), 0x0706, 0xFFFF); ++ ++ /* ctrl_lim */ ++ IFX_PCIE_PHY_REG(PCIE_PHY_TX1_CTRL3(pcie_port), 0x1FFF, 0xFFFF); ++ ++ /* ctrl */ ++ IFX_PCIE_PHY_REG(PCIE_PHY_TX1_A_CTRL1(pcie_port), 0x0800, 0xFF00); ++ ++ /* predrv_ser_en */ ++ IFX_PCIE_PHY_REG(PCIE_PHY_TX2_A_CTRL2(pcie_port), 0x4702, 0x7F00); ++ ++ /* RTERM*/ ++ IFX_PCIE_PHY_REG(PCIE_PHY_TX1_CTRL2(pcie_port), 0x2e00, 0xFFFF); ++ ++ /* en_ext_mmd_div_ratio */ ++ IFX_PCIE_PHY_REG(PCIE_PHY_PLL_CTRL3(pcie_port), 0x0000, 0x0002); ++ ++ /* ext_mmd_div_ratio*/ ++ IFX_PCIE_PHY_REG(PCIE_PHY_PLL_CTRL3(pcie_port), 0x0000, 0x0070); ++ ++ /* pll_ensdm */ ++ IFX_PCIE_PHY_REG(PCIE_PHY_PLL_CTRL2(pcie_port), 0x0400, 0x0400); ++ ++ /* en_const_sdm */ ++ IFX_PCIE_PHY_REG(PCIE_PHY_PLL_CTRL2(pcie_port), 0x0200, 0x0200); ++ ++ /* mmd */ ++ IFX_PCIE_PHY_REG(PCIE_PHY_PLL_A_CTRL3(pcie_port), 0x2000, 0xe000); ++ ++ /* lf_mode */ ++ IFX_PCIE_PHY_REG(PCIE_PHY_PLL_A_CTRL2(pcie_port), 0x0000, 0x4000); ++ ++ /* const_sdm */ ++ IFX_PCIE_PHY_REG(PCIE_PHY_PLL_CTRL1(pcie_port), 0x38e4, 0xFFFF); ++ ++ IFX_PCIE_PHY_REG(PCIE_PHY_PLL_CTRL2(pcie_port), 0x0000, 0x0100); ++ /* const sdm */ ++ IFX_PCIE_PHY_REG(PCIE_PHY_PLL_CTRL2(pcie_port), 0x00ee, 0x00FF); ++ ++ /* pllmod */ ++ IFX_PCIE_PHY_REG(PCIE_PHY_PLL_CTRL7(pcie_port), 0x0002, 0xFFFF); ++ IFX_PCIE_PHY_REG(PCIE_PHY_PLL_CTRL6(pcie_port), 0x3a04, 0xFFFF); ++ IFX_PCIE_PHY_REG(PCIE_PHY_PLL_CTRL5(pcie_port), 0xfae3, 0xFFFF); ++ IFX_PCIE_PHY_REG(PCIE_PHY_PLL_CTRL4(pcie_port), 0x1c72, 0xFFFF); ++ ++ /* improved 100MHz clock output */ ++ IFX_PCIE_PHY_REG(PCIE_PHY_TX2_CTRL2(pcie_port), 0x3096, 0xFFFF); ++ IFX_PCIE_PHY_REG(PCIE_PHY_TX2_A_CTRL2(pcie_port), 0x4707, 0xFFFF); ++ ++ /* reduced CDR BW to avoid glitches */ ++ IFX_PCIE_PHY_REG(PCIE_PHY_RX1_CDR(pcie_port), 0x0235, 0xFFFF); ++ ++ IFX_PCIE_PRINT(PCIE_MSG_PHY, "%s pcie_port %d exit\n", __func__, pcie_port); ++} ++#endif /* CONFIG_IFX_PCIE_PHY_36MHZ_SSC_MODE */ ++ ++#ifdef CONFIG_IFX_PCIE_PHY_25MHZ_MODE ++static void ++pcie_phy_25mhz_mode_setup(int pcie_port) ++{ ++ IFX_PCIE_PRINT(PCIE_MSG_PHY, "%s pcie_port %d enter\n", __func__, pcie_port); ++#ifdef IFX_PCI_PHY_REG_DUMP ++ IFX_PCIE_PRINT(PCIE_MSG_PHY, "Initial PHY register dump\n"); ++ pcie_phy_reg_dump(pcie_port); ++#endif ++ /* en_const_sdm */ ++ IFX_PCIE_PHY_REG(PCIE_PHY_PLL_CTRL2(pcie_port), 0x0100, 0x0100); ++ ++ /* pll_ensdm */ ++ IFX_PCIE_PHY_REG(PCIE_PHY_PLL_CTRL2(pcie_port), 0x0000, 0x0200); ++ ++ /* en_ext_mmd_div_ratio*/ ++ IFX_PCIE_PHY_REG(PCIE_PHY_PLL_CTRL3(pcie_port), 0x0002, 0x0002); ++ ++ /* ext_mmd_div_ratio*/ ++ IFX_PCIE_PHY_REG(PCIE_PHY_PLL_CTRL3(pcie_port), 0x0040, 0x0070); ++ ++ /* mmd */ ++ IFX_PCIE_PHY_REG(PCIE_PHY_PLL_A_CTRL3(pcie_port), 0x6000, 0xe000); ++ ++ /* lf_mode */ ++ IFX_PCIE_PHY_REG(PCIE_PHY_PLL_A_CTRL2(pcie_port), 0x4000, 0x4000); ++ ++ IFX_PCIE_PRINT(PCIE_MSG_PHY, "%s pcie_port %d exit\n", __func__, pcie_port); ++} ++#endif /* CONFIG_IFX_PCIE_PHY_25MHZ_MODE */ ++ ++#ifdef CONFIG_IFX_PCIE_PHY_100MHZ_MODE ++static void ++pcie_phy_100mhz_mode_setup(int pcie_port) ++{ ++ IFX_PCIE_PRINT(PCIE_MSG_PHY, "%s pcie_port %d enter\n", __func__, pcie_port); ++#ifdef IFX_PCI_PHY_REG_DUMP ++ IFX_PCIE_PRINT(PCIE_MSG_PHY, "Initial PHY register dump\n"); ++ pcie_phy_reg_dump(pcie_port); ++#endif ++ /* en_ext_mmd_div_ratio */ ++ IFX_PCIE_PHY_REG(PCIE_PHY_PLL_CTRL3(pcie_port), 0x0000, 0x0002); ++ ++ /* ext_mmd_div_ratio*/ ++ IFX_PCIE_PHY_REG(PCIE_PHY_PLL_CTRL3(pcie_port), 0x0000, 0x0070); ++ ++ /* pll_ensdm */ ++ IFX_PCIE_PHY_REG(PCIE_PHY_PLL_CTRL2(pcie_port), 0x0200, 0x0200); ++ ++ /* en_const_sdm */ ++ IFX_PCIE_PHY_REG(PCIE_PHY_PLL_CTRL2(pcie_port), 0x0100, 0x0100); ++ ++ /* mmd */ ++ IFX_PCIE_PHY_REG(PCIE_PHY_PLL_A_CTRL3(pcie_port), 0x2000, 0xe000); ++ ++ /* lf_mode */ ++ IFX_PCIE_PHY_REG(PCIE_PHY_PLL_A_CTRL2(pcie_port), 0x0000, 0x4000); ++ ++ /* const_sdm */ ++ IFX_PCIE_PHY_REG(PCIE_PHY_PLL_CTRL1(pcie_port), 0x38e4, 0xFFFF); ++ ++ /* const sdm */ ++ IFX_PCIE_PHY_REG(PCIE_PHY_PLL_CTRL2(pcie_port), 0x00ee, 0x00FF); ++ ++ /* pllmod */ ++ IFX_PCIE_PHY_REG(PCIE_PHY_PLL_CTRL7(pcie_port), 0x0002, 0xFFFF); ++ IFX_PCIE_PHY_REG(PCIE_PHY_PLL_CTRL6(pcie_port), 0x3a04, 0xFFFF); ++ IFX_PCIE_PHY_REG(PCIE_PHY_PLL_CTRL5(pcie_port), 0xfae3, 0xFFFF); ++ IFX_PCIE_PHY_REG(PCIE_PHY_PLL_CTRL4(pcie_port), 0x1b72, 0xFFFF); ++ ++ IFX_PCIE_PRINT(PCIE_MSG_PHY, "%s pcie_port %d exit\n", __func__, pcie_port); ++} ++#endif /* CONFIG_IFX_PCIE_PHY_100MHZ_MODE */ ++ ++static int ++pcie_phy_wait_startup_ready(int pcie_port) ++{ ++ int i; ++ ++ for (i = 0; i < IFX_PCIE_PLL_TIMEOUT; i++) { ++ if ((IFX_PCIE_PHY_REG16(PCIE_PHY_PLL_STATUS(pcie_port)) & 0x0040) != 0) { ++ break; ++ } ++ udelay(10); ++ } ++ if (i >= IFX_PCIE_PLL_TIMEOUT) { ++ printk(KERN_ERR "%s PLL Link timeout\n", __func__); ++ return -1; ++ } ++ return 0; ++} ++ ++static void ++pcie_phy_load_enable(int pcie_port, int slice) ++{ ++ /* Set the load_en of tx/rx slice to '1' */ ++ switch (slice) { ++ case 1: ++ IFX_PCIE_PHY_REG(PCIE_PHY_TX1_CTRL1(pcie_port), 0x0010, 0x0010); ++ break; ++ case 2: ++ IFX_PCIE_PHY_REG(PCIE_PHY_TX2_CTRL1(pcie_port), 0x0010, 0x0010); ++ break; ++ case 3: ++ IFX_PCIE_PHY_REG(PCIE_PHY_RX1_CTRL1(pcie_port), 0x0002, 0x0002); ++ break; ++ } ++} ++ ++static void ++pcie_phy_load_disable(int pcie_port, int slice) ++{ ++ /* set the load_en of tx/rx slice to '0' */ ++ switch (slice) { ++ case 1: ++ IFX_PCIE_PHY_REG(PCIE_PHY_TX1_CTRL1(pcie_port), 0x0000, 0x0010); ++ break; ++ case 2: ++ IFX_PCIE_PHY_REG(PCIE_PHY_TX2_CTRL1(pcie_port), 0x0000, 0x0010); ++ break; ++ case 3: ++ IFX_PCIE_PHY_REG(PCIE_PHY_RX1_CTRL1(pcie_port), 0x0000, 0x0002); ++ break; ++ } ++} ++ ++static void ++pcie_phy_load_war(int pcie_port) ++{ ++ int slice; ++ ++ for (slice = 1; slice < 4; slice++) { ++ pcie_phy_load_enable(pcie_port, slice); ++ udelay(1); ++ pcie_phy_load_disable(pcie_port, slice); ++ } ++} ++ ++static void ++pcie_phy_tx2_modulation(int pcie_port) ++{ ++ IFX_PCIE_PHY_REG(PCIE_PHY_TX2_MOD1(pcie_port), 0x1FFE, 0xFFFF); ++ IFX_PCIE_PHY_REG(PCIE_PHY_TX2_MOD2(pcie_port), 0xFFFE, 0xFFFF); ++ IFX_PCIE_PHY_REG(PCIE_PHY_TX2_MOD3(pcie_port), 0x0601, 0xFFFF); ++ mdelay(1); ++ IFX_PCIE_PHY_REG(PCIE_PHY_TX2_MOD3(pcie_port), 0x0001, 0xFFFF); ++} ++ ++static void ++pcie_phy_tx1_modulation(int pcie_port) ++{ ++ IFX_PCIE_PHY_REG(PCIE_PHY_TX1_MOD1(pcie_port), 0x1FFE, 0xFFFF); ++ IFX_PCIE_PHY_REG(PCIE_PHY_TX1_MOD2(pcie_port), 0xFFFE, 0xFFFF); ++ IFX_PCIE_PHY_REG(PCIE_PHY_TX1_MOD3(pcie_port), 0x0601, 0xFFFF); ++ mdelay(1); ++ IFX_PCIE_PHY_REG(PCIE_PHY_TX1_MOD3(pcie_port), 0x0001, 0xFFFF); ++} ++ ++static void ++pcie_phy_tx_modulation_war(int pcie_port) ++{ ++ int i; ++ ++#define PCIE_PHY_MODULATION_NUM 5 ++ for (i = 0; i < PCIE_PHY_MODULATION_NUM; i++) { ++ pcie_phy_tx2_modulation(pcie_port); ++ pcie_phy_tx1_modulation(pcie_port); ++ } ++#undef PCIE_PHY_MODULATION_NUM ++} ++ ++void ++pcie_phy_clock_mode_setup(int pcie_port) ++{ ++ pcie_pdi_big_endian(pcie_port); ++ ++ /* Enable PDI to access PCIe PHY register */ ++ pcie_pdi_pmu_enable(pcie_port); ++ ++ /* Configure PLL and PHY clock */ ++ pcie_phy_comm_setup(pcie_port); ++ ++#ifdef CONFIG_IFX_PCIE_PHY_36MHZ_MODE ++ pcie_phy_36mhz_mode_setup(pcie_port); ++#elif defined(CONFIG_IFX_PCIE_PHY_36MHZ_SSC_MODE) ++ pcie_phy_36mhz_ssc_mode_setup(pcie_port); ++#elif defined(CONFIG_IFX_PCIE_PHY_25MHZ_MODE) ++ pcie_phy_25mhz_mode_setup(pcie_port); ++#elif defined (CONFIG_IFX_PCIE_PHY_100MHZ_MODE) ++ pcie_phy_100mhz_mode_setup(pcie_port); ++#else ++ #error "PCIE PHY Clock Mode must be chosen first!!!!" ++#endif /* CONFIG_IFX_PCIE_PHY_36MHZ_MODE */ ++ ++ /* Enable PCIe PHY and make PLL setting take effect */ ++ pcie_phy_pmu_enable(pcie_port); ++ ++ /* Check if we are in startup_ready status */ ++ pcie_phy_wait_startup_ready(pcie_port); ++ ++ pcie_phy_load_war(pcie_port); ++ ++ /* Apply TX modulation workarounds */ ++ pcie_phy_tx_modulation_war(pcie_port); ++ ++#ifdef IFX_PCI_PHY_REG_DUMP ++ IFX_PCIE_PRINT(PCIE_MSG_PHY, "Modified PHY register dump\n"); ++ pcie_phy_reg_dump(pcie_port); ++#endif ++} ++ +--- /dev/null ++++ b/arch/mips/pci/ifxmips_pcie_pm.c +@@ -0,0 +1,176 @@ ++/****************************************************************************** ++** ++** FILE NAME : ifxmips_pcie_pm.c ++** PROJECT : IFX UEIP ++** MODULES : PCIE Root Complex Driver ++** ++** DATE : 21 Dec 2009 ++** AUTHOR : Lei Chuanhua ++** DESCRIPTION : PCIE Root Complex Driver Power Managment ++** COPYRIGHT : Copyright (c) 2009 ++** Lantiq Deutschland GmbH ++** Am Campeon 3, 85579 Neubiberg, Germany ++** ++** This program is free software; you can redistribute it and/or modify ++** it under the terms of the GNU General Public License as published by ++** the Free Software Foundation; either version 2 of the License, or ++** (at your option) any later version. ++** ++** HISTORY ++** $Date $Author $Comment ++** 21 Dec,2009 Lei Chuanhua First UEIP release ++*******************************************************************************/ ++/*! ++ \defgroup IFX_PCIE_PM Power Management functions ++ \ingroup IFX_PCIE ++ \brief IFX PCIE Root Complex Driver power management functions ++*/ ++ ++/*! ++ \file ifxmips_pcie_pm.c ++ \ingroup IFX_PCIE ++ \brief source file for PCIE Root Complex Driver Power Management ++*/ ++ ++#ifndef EXPORT_SYMTAB ++#define EXPORT_SYMTAB ++#endif ++#ifndef AUTOCONF_INCLUDED ++#include ++#endif /* AUTOCONF_INCLUDED */ ++#include ++#include ++#include ++#include ++#include ++ ++/* Project header */ ++#include ++#include ++#include ++#include ++#include "ifxmips_pcie_pm.h" ++ ++/** ++ * \fn static IFX_PMCU_RETURN_t ifx_pcie_pmcu_state_change(IFX_PMCU_STATE_t pmcuState) ++ * \brief the callback function to request pmcu state in the power management hardware-dependent module ++ * ++ * \param pmcuState This parameter is a PMCU state. ++ * ++ * \return IFX_PMCU_RETURN_SUCCESS Set Power State successfully ++ * \return IFX_PMCU_RETURN_ERROR Failed to set power state. ++ * \return IFX_PMCU_RETURN_DENIED Not allowed to operate power state ++ * \ingroup IFX_PCIE_PM ++ */ ++static IFX_PMCU_RETURN_t ++ifx_pcie_pmcu_state_change(IFX_PMCU_STATE_t pmcuState) ++{ ++ switch(pmcuState) ++ { ++ case IFX_PMCU_STATE_D0: ++ return IFX_PMCU_RETURN_SUCCESS; ++ case IFX_PMCU_STATE_D1: // Not Applicable ++ return IFX_PMCU_RETURN_DENIED; ++ case IFX_PMCU_STATE_D2: // Not Applicable ++ return IFX_PMCU_RETURN_DENIED; ++ case IFX_PMCU_STATE_D3: // Module clock gating and Power gating ++ return IFX_PMCU_RETURN_SUCCESS; ++ default: ++ return IFX_PMCU_RETURN_DENIED; ++ } ++} ++ ++/** ++ * \fn static IFX_PMCU_RETURN_t ifx_pcie_pmcu_state_get(IFX_PMCU_STATE_t *pmcuState) ++ * \brief the callback function to get pmcu state in the power management hardware-dependent module ++ ++ * \param pmcuState Pointer to return power state. ++ * ++ * \return IFX_PMCU_RETURN_SUCCESS Set Power State successfully ++ * \return IFX_PMCU_RETURN_ERROR Failed to set power state. ++ * \return IFX_PMCU_RETURN_DENIED Not allowed to operate power state ++ * \ingroup IFX_PCIE_PM ++ */ ++static IFX_PMCU_RETURN_t ++ifx_pcie_pmcu_state_get(IFX_PMCU_STATE_t *pmcuState) ++{ ++ return IFX_PMCU_RETURN_SUCCESS; ++} ++ ++/** ++ * \fn IFX_PMCU_RETURN_t ifx_pcie_pmcu_prechange(IFX_PMCU_MODULE_t pmcuModule, IFX_PMCU_STATE_t newState, IFX_PMCU_STATE_t oldState) ++ * \brief Apply all callbacks registered to be executed before a state change for pmcuModule ++ * ++ * \param pmcuModule Module ++ * \param newState New state ++ * \param oldState Old state ++ * \return IFX_PMCU_RETURN_SUCCESS Set Power State successfully ++ * \return IFX_PMCU_RETURN_ERROR Failed to set power state. ++ * \ingroup IFX_PCIE_PM ++ */ ++static IFX_PMCU_RETURN_t ++ifx_pcie_pmcu_prechange(IFX_PMCU_MODULE_t pmcuModule, IFX_PMCU_STATE_t newState, IFX_PMCU_STATE_t oldState) ++{ ++ return IFX_PMCU_RETURN_SUCCESS; ++} ++ ++/** ++ * \fn IFX_PMCU_RETURN_t ifx_pcie_pmcu_postchange(IFX_PMCU_MODULE_t pmcuModule, IFX_PMCU_STATE_t newState, IFX_PMCU_STATE_t oldState) ++ * \brief Apply all callbacks registered to be executed before a state change for pmcuModule ++ * ++ * \param pmcuModule Module ++ * \param newState New state ++ * \param oldState Old state ++ * \return IFX_PMCU_RETURN_SUCCESS Set Power State successfully ++ * \return IFX_PMCU_RETURN_ERROR Failed to set power state. ++ * \ingroup IFX_PCIE_PM ++ */ ++static IFX_PMCU_RETURN_t ++ifx_pcie_pmcu_postchange(IFX_PMCU_MODULE_t pmcuModule, IFX_PMCU_STATE_t newState, IFX_PMCU_STATE_t oldState) ++{ ++ return IFX_PMCU_RETURN_SUCCESS; ++} ++ ++/** ++ * \fn static void ifx_pcie_pmcu_init(void) ++ * \brief Register with central PMCU module ++ * \return none ++ * \ingroup IFX_PCIE_PM ++ */ ++void ++ifx_pcie_pmcu_init(void) ++{ ++ IFX_PMCU_REGISTER_t pmcuRegister; ++ ++ /* XXX, hook driver context */ ++ ++ /* State function register */ ++ memset(&pmcuRegister, 0, sizeof(IFX_PMCU_REGISTER_t)); ++ pmcuRegister.pmcuModule = IFX_PMCU_MODULE_PCIE; ++ pmcuRegister.pmcuModuleNr = 0; ++ pmcuRegister.ifx_pmcu_state_change = ifx_pcie_pmcu_state_change; ++ pmcuRegister.ifx_pmcu_state_get = ifx_pcie_pmcu_state_get; ++ pmcuRegister.pre = ifx_pcie_pmcu_prechange; ++ pmcuRegister.post= ifx_pcie_pmcu_postchange; ++ ifx_pmcu_register(&pmcuRegister); ++} ++ ++/** ++ * \fn static void ifx_pcie_pmcu_exit(void) ++ * \brief Unregister with central PMCU module ++ * ++ * \return none ++ * \ingroup IFX_PCIE_PM ++ */ ++void ++ifx_pcie_pmcu_exit(void) ++{ ++ IFX_PMCU_REGISTER_t pmcuUnRegister; ++ ++ /* XXX, hook driver context */ ++ ++ pmcuUnRegister.pmcuModule = IFX_PMCU_MODULE_PCIE; ++ pmcuUnRegister.pmcuModuleNr = 0; ++ ifx_pmcu_unregister(&pmcuUnRegister); ++} ++ +--- /dev/null ++++ b/arch/mips/pci/ifxmips_pcie_pm.h +@@ -0,0 +1,36 @@ ++/****************************************************************************** ++** ++** FILE NAME : ifxmips_pcie_pm.h ++** PROJECT : IFX UEIP ++** MODULES : PCIe Root Complex Driver ++** ++** DATE : 21 Dec 2009 ++** AUTHOR : Lei Chuanhua ++** DESCRIPTION : PCIe Root Complex Driver Power Managment ++** COPYRIGHT : Copyright (c) 2009 ++** Lantiq Deutschland GmbH ++** Am Campeon 3, 85579 Neubiberg, Germany ++** ++** This program is free software; you can redistribute it and/or modify ++** it under the terms of the GNU General Public License as published by ++** the Free Software Foundation; either version 2 of the License, or ++** (at your option) any later version. ++** ++** HISTORY ++** $Date $Author $Comment ++** 21 Dec,2009 Lei Chuanhua First UEIP release ++*******************************************************************************/ ++/*! ++ \file ifxmips_pcie_pm.h ++ \ingroup IFX_PCIE ++ \brief header file for PCIe Root Complex Driver Power Management ++*/ ++ ++#ifndef IFXMIPS_PCIE_PM_H ++#define IFXMIPS_PCIE_PM_H ++ ++void ifx_pcie_pmcu_init(void); ++void ifx_pcie_pmcu_exit(void); ++ ++#endif /* IFXMIPS_PCIE_PM_H */ ++ +--- /dev/null ++++ b/arch/mips/pci/ifxmips_pcie_reg.h +@@ -0,0 +1,1001 @@ ++/****************************************************************************** ++** ++** FILE NAME : ifxmips_pcie_reg.h ++** PROJECT : IFX UEIP for VRX200 ++** MODULES : PCIe module ++** ++** DATE : 02 Mar 2009 ++** AUTHOR : Lei Chuanhua ++** DESCRIPTION : PCIe Root Complex Driver ++** COPYRIGHT : Copyright (c) 2009 ++** Infineon Technologies AG ++** Am Campeon 1-12, 85579 Neubiberg, Germany ++** ++** This program is free software; you can redistribute it and/or modify ++** it under the terms of the GNU General Public License as published by ++** the Free Software Foundation; either version 2 of the License, or ++** (at your option) any later version. ++** HISTORY ++** $Version $Date $Author $Comment ++** 0.0.1 17 Mar,2009 Lei Chuanhua Initial version ++*******************************************************************************/ ++#ifndef IFXMIPS_PCIE_REG_H ++#define IFXMIPS_PCIE_REG_H ++/*! ++ \file ifxmips_pcie_reg.h ++ \ingroup IFX_PCIE ++ \brief header file for PCIe module register definition ++*/ ++/* PCIe Address Mapping Base */ ++#define PCIE_CFG_PHY_BASE 0x1D000000UL ++#define PCIE_CFG_BASE (KSEG1 + PCIE_CFG_PHY_BASE) ++#define PCIE_CFG_SIZE (8 * 1024 * 1024) ++ ++#define PCIE_MEM_PHY_BASE 0x1C000000UL ++#define PCIE_MEM_BASE (KSEG1 + PCIE_MEM_PHY_BASE) ++#define PCIE_MEM_SIZE (16 * 1024 * 1024) ++#define PCIE_MEM_PHY_END (PCIE_MEM_PHY_BASE + PCIE_MEM_SIZE - 1) ++ ++#define PCIE_IO_PHY_BASE 0x1D800000UL ++#define PCIE_IO_BASE (KSEG1 + PCIE_IO_PHY_BASE) ++#define PCIE_IO_SIZE (1 * 1024 * 1024) ++#define PCIE_IO_PHY_END (PCIE_IO_PHY_BASE + PCIE_IO_SIZE - 1) ++ ++#define PCIE_RC_CFG_BASE (KSEG1 + 0x1D900000) ++#define PCIE_APP_LOGIC_REG (KSEG1 + 0x1E100900) ++#define PCIE_MSI_PHY_BASE 0x1F600000UL ++ ++#define PCIE_PDI_PHY_BASE 0x1F106800UL ++#define PCIE_PDI_BASE (KSEG1 + PCIE_PDI_PHY_BASE) ++#define PCIE_PDI_SIZE 0x400 ++ ++#define PCIE1_CFG_PHY_BASE 0x19000000UL ++#define PCIE1_CFG_BASE (KSEG1 + PCIE1_CFG_PHY_BASE) ++#define PCIE1_CFG_SIZE (8 * 1024 * 1024) ++ ++#define PCIE1_MEM_PHY_BASE 0x18000000UL ++#define PCIE1_MEM_BASE (KSEG1 + PCIE1_MEM_PHY_BASE) ++#define PCIE1_MEM_SIZE (16 * 1024 * 1024) ++#define PCIE1_MEM_PHY_END (PCIE1_MEM_PHY_BASE + PCIE1_MEM_SIZE - 1) ++ ++#define PCIE1_IO_PHY_BASE 0x19800000UL ++#define PCIE1_IO_BASE (KSEG1 + PCIE1_IO_PHY_BASE) ++#define PCIE1_IO_SIZE (1 * 1024 * 1024) ++#define PCIE1_IO_PHY_END (PCIE1_IO_PHY_BASE + PCIE1_IO_SIZE - 1) ++ ++#define PCIE1_RC_CFG_BASE (KSEG1 + 0x19900000) ++#define PCIE1_APP_LOGIC_REG (KSEG1 + 0x1E100700) ++#define PCIE1_MSI_PHY_BASE 0x1F400000UL ++ ++#define PCIE1_PDI_PHY_BASE 0x1F700400UL ++#define PCIE1_PDI_BASE (KSEG1 + PCIE1_PDI_PHY_BASE) ++#define PCIE1_PDI_SIZE 0x400 ++ ++#define PCIE_CFG_PORT_TO_BASE(X) ((X) > 0 ? (PCIE1_CFG_BASE) : (PCIE_CFG_BASE)) ++#define PCIE_MEM_PORT_TO_BASE(X) ((X) > 0 ? (PCIE1_MEM_BASE) : (PCIE_MEM_BASE)) ++#define PCIE_IO_PORT_TO_BASE(X) ((X) > 0 ? (PCIE1_IO_BASE) : (PCIE_IO_BASE)) ++#define PCIE_MEM_PHY_PORT_TO_BASE(X) ((X) > 0 ? (PCIE1_MEM_PHY_BASE) : (PCIE_MEM_PHY_BASE)) ++#define PCIE_MEM_PHY_PORT_TO_END(X) ((X) > 0 ? (PCIE1_MEM_PHY_END) : (PCIE_MEM_PHY_END)) ++#define PCIE_IO_PHY_PORT_TO_BASE(X) ((X) > 0 ? (PCIE1_IO_PHY_BASE) : (PCIE_IO_PHY_BASE)) ++#define PCIE_IO_PHY_PORT_TO_END(X) ((X) > 0 ? (PCIE1_IO_PHY_END) : (PCIE_IO_PHY_END)) ++#define PCIE_APP_PORT_TO_BASE(X) ((X) > 0 ? (PCIE1_APP_LOGIC_REG) : (PCIE_APP_LOGIC_REG)) ++#define PCIE_RC_PORT_TO_BASE(X) ((X) > 0 ? (PCIE1_RC_CFG_BASE) : (PCIE_RC_CFG_BASE)) ++#define PCIE_PHY_PORT_TO_BASE(X) ((X) > 0 ? (PCIE1_PDI_BASE) : (PCIE_PDI_BASE)) ++ ++/* PCIe Application Logic Register */ ++/* RC Core Control Register */ ++#define PCIE_RC_CCR(X) (volatile u32*)(PCIE_APP_PORT_TO_BASE(X) + 0x10) ++/* This should be enabled after initializing configuratin registers ++ * Also should check link status retraining bit ++ */ ++#define PCIE_RC_CCR_LTSSM_ENABLE 0x00000001 /* Enable LTSSM to continue link establishment */ ++ ++/* RC Core Debug Register */ ++#define PCIE_RC_DR(X) (volatile u32*)(PCIE_APP_PORT_TO_BASE(X) + 0x14) ++#define PCIE_RC_DR_DLL_UP 0x00000001 /* Data Link Layer Up */ ++#define PCIE_RC_DR_CURRENT_POWER_STATE 0x0000000E /* Current Power State */ ++#define PCIE_RC_DR_CURRENT_POWER_STATE_S 1 ++#define PCIE_RC_DR_CURRENT_LTSSM_STATE 0x000001F0 /* Current LTSSM State */ ++#define PCIE_RC_DR_CURRENT_LTSSM_STATE_S 4 ++ ++#define PCIE_RC_DR_PM_DEV_STATE 0x00000E00 /* Power Management D-State */ ++#define PCIE_RC_DR_PM_DEV_STATE_S 9 ++ ++#define PCIE_RC_DR_PM_ENABLED 0x00001000 /* Power Management State from PMU */ ++#define PCIE_RC_DR_PME_EVENT_ENABLED 0x00002000 /* Power Management Event Enable State */ ++#define PCIE_RC_DR_AUX_POWER_ENABLED 0x00004000 /* Auxiliary Power Enable */ ++ ++/* Current Power State Definition */ ++enum { ++ PCIE_RC_DR_D0 = 0, ++ PCIE_RC_DR_D1, /* Not supported */ ++ PCIE_RC_DR_D2, /* Not supported */ ++ PCIE_RC_DR_D3, ++ PCIE_RC_DR_UN, ++}; ++ ++/* PHY Link Status Register */ ++#define PCIE_PHY_SR(X) (volatile u32*)(PCIE_APP_PORT_TO_BASE(X) + 0x18) ++#define PCIE_PHY_SR_PHY_LINK_UP 0x00000001 /* PHY Link Up/Down Indicator */ ++ ++/* Electromechanical Control Register */ ++#define PCIE_EM_CR(X) (volatile u32*)(PCIE_APP_PORT_TO_BASE(X) + 0x1C) ++#define PCIE_EM_CR_CARD_IS_PRESENT 0x00000001 /* Card Presence Detect State */ ++#define PCIE_EM_CR_MRL_OPEN 0x00000002 /* MRL Sensor State */ ++#define PCIE_EM_CR_POWER_FAULT_SET 0x00000004 /* Power Fault Detected */ ++#define PCIE_EM_CR_MRL_SENSOR_SET 0x00000008 /* MRL Sensor Changed */ ++#define PCIE_EM_CR_PRESENT_DETECT_SET 0x00000010 /* Card Presense Detect Changed */ ++#define PCIE_EM_CR_CMD_CPL_INT_SET 0x00000020 /* Command Complete Interrupt */ ++#define PCIE_EM_CR_SYS_INTERLOCK_SET 0x00000040 /* System Electromechanical IterLock Engaged */ ++#define PCIE_EM_CR_ATTENTION_BUTTON_SET 0x00000080 /* Attention Button Pressed */ ++ ++/* Interrupt Status Register */ ++#define PCIE_IR_SR(X) (volatile u32*)(PCIE_APP_PORT_TO_BASE(X) + 0x20) ++#define PCIE_IR_SR_PME_CAUSE_MSI 0x00000002 /* MSI caused by PME */ ++#define PCIE_IR_SR_HP_PME_WAKE_GEN 0x00000004 /* Hotplug PME Wake Generation */ ++#define PCIE_IR_SR_HP_MSI 0x00000008 /* Hotplug MSI */ ++#define PCIE_IR_SR_AHB_LU_ERR 0x00000030 /* AHB Bridge Lookup Error Signals */ ++#define PCIE_IR_SR_AHB_LU_ERR_S 4 ++#define PCIE_IR_SR_INT_MSG_NUM 0x00003E00 /* Interrupt Message Number */ ++#define PCIE_IR_SR_INT_MSG_NUM_S 9 ++#define PCIE_IR_SR_AER_INT_MSG_NUM 0xF8000000 /* Advanced Error Interrupt Message Number */ ++#define PCIE_IR_SR_AER_INT_MSG_NUM_S 27 ++ ++/* Message Control Register */ ++#define PCIE_MSG_CR(X) (volatile u32*)(PCIE_APP_PORT_TO_BASE(X) + 0x30) ++#define PCIE_MSG_CR_GEN_PME_TURN_OFF_MSG 0x00000001 /* Generate PME Turn Off Message */ ++#define PCIE_MSG_CR_GEN_UNLOCK_MSG 0x00000002 /* Generate Unlock Message */ ++ ++#define PCIE_VDM_DR(X) (volatile u32*)(PCIE_APP_PORT_TO_BASE(X) + 0x34) ++ ++/* Vendor-Defined Message Requester ID Register */ ++#define PCIE_VDM_RID(X) (PCIE_APP_PORT_TO_BASE (X) + 0x38) ++#define PCIE_VDM_RID_VENROR_MSG_REQ_ID 0x0000FFFF ++#define PCIE_VDM_RID_VDMRID_S 0 ++ ++/* ASPM Control Register */ ++#define PCIE_ASPM_CR(X) (volatile u32*)(PCIE_APP_PORT_TO_BASE(X) + 0x40) ++#define PCIE_ASPM_CR_HOT_RST 0x00000001 /* Hot Reset Request to the downstream device */ ++#define PCIE_ASPM_CR_REQ_EXIT_L1 0x00000002 /* Request to Exit L1 */ ++#define PCIE_ASPM_CR_REQ_ENTER_L1 0x00000004 /* Request to Enter L1 */ ++ ++/* Vendor Message DW0 Register */ ++#define PCIE_VM_MSG_DW0(X) (volatile u32*)(PCIE_APP_PORT_TO_BASE(X) + 0x50) ++#define PCIE_VM_MSG_DW0_TYPE 0x0000001F /* Message type */ ++#define PCIE_VM_MSG_DW0_TYPE_S 0 ++#define PCIE_VM_MSG_DW0_FORMAT 0x00000060 /* Format */ ++#define PCIE_VM_MSG_DW0_FORMAT_S 5 ++#define PCIE_VM_MSG_DW0_TC 0x00007000 /* Traffic Class */ ++#define PCIE_VM_MSG_DW0_TC_S 12 ++#define PCIE_VM_MSG_DW0_ATTR 0x000C0000 /* Atrributes */ ++#define PCIE_VM_MSG_DW0_ATTR_S 18 ++#define PCIE_VM_MSG_DW0_EP_TLP 0x00100000 /* Poisoned TLP */ ++#define PCIE_VM_MSG_DW0_TD 0x00200000 /* TLP Digest */ ++#define PCIE_VM_MSG_DW0_LEN 0xFFC00000 /* Length */ ++#define PCIE_VM_MSG_DW0_LEN_S 22 ++ ++/* Format Definition */ ++enum { ++ PCIE_VM_MSG_FORMAT_00 = 0, /* 3DW Hdr, no data*/ ++ PCIE_VM_MSG_FORMAT_01, /* 4DW Hdr, no data */ ++ PCIE_VM_MSG_FORMAT_10, /* 3DW Hdr, with data */ ++ PCIE_VM_MSG_FORMAT_11, /* 4DW Hdr, with data */ ++}; ++ ++/* Traffic Class Definition */ ++enum { ++ PCIE_VM_MSG_TC0 = 0, ++ PCIE_VM_MSG_TC1, ++ PCIE_VM_MSG_TC2, ++ PCIE_VM_MSG_TC3, ++ PCIE_VM_MSG_TC4, ++ PCIE_VM_MSG_TC5, ++ PCIE_VM_MSG_TC6, ++ PCIE_VM_MSG_TC7, ++}; ++ ++/* Attributes Definition */ ++enum { ++ PCIE_VM_MSG_ATTR_00 = 0, /* RO and No Snoop cleared */ ++ PCIE_VM_MSG_ATTR_01, /* RO cleared , No Snoop set */ ++ PCIE_VM_MSG_ATTR_10, /* RO set, No Snoop cleared*/ ++ PCIE_VM_MSG_ATTR_11, /* RO and No Snoop set */ ++}; ++ ++/* Payload Size Definition */ ++#define PCIE_VM_MSG_LEN_MIN 0 ++#define PCIE_VM_MSG_LEN_MAX 1024 ++ ++/* Vendor Message DW1 Register */ ++#define PCIE_VM_MSG_DW1(X) (volatile u32*)(PCIE_APP_PORT_TO_BASE(X) + 0x54) ++#define PCIE_VM_MSG_DW1_FUNC_NUM 0x00000070 /* Function Number */ ++#define PCIE_VM_MSG_DW1_FUNC_NUM_S 8 ++#define PCIE_VM_MSG_DW1_CODE 0x00FF0000 /* Message Code */ ++#define PCIE_VM_MSG_DW1_CODE_S 16 ++#define PCIE_VM_MSG_DW1_TAG 0xFF000000 /* Tag */ ++#define PCIE_VM_MSG_DW1_TAG_S 24 ++ ++#define PCIE_VM_MSG_DW2(X) (volatile u32*)(PCIE_APP_PORT_TO_BASE(X) + 0x58) ++#define PCIE_VM_MSG_DW3(X) (volatile u32*)(PCIE_APP_PORT_TO_BASE(X) + 0x5C) ++ ++/* Vendor Message Request Register */ ++#define PCIE_VM_MSG_REQR(X) (volatile u32*)(PCIE_APP_PORT_TO_BASE(X) + 0x60) ++#define PCIE_VM_MSG_REQR_REQ 0x00000001 /* Vendor Message Request */ ++ ++ ++/* AHB Slave Side Band Control Register */ ++#define PCIE_AHB_SSB(X) (volatile u32*)(PCIE_APP_PORT_TO_BASE(X) + 0x70) ++#define PCIE_AHB_SSB_REQ_BCM 0x00000001 /* Slave Reques BCM filed */ ++#define PCIE_AHB_SSB_REQ_EP 0x00000002 /* Slave Reques EP filed */ ++#define PCIE_AHB_SSB_REQ_TD 0x00000004 /* Slave Reques TD filed */ ++#define PCIE_AHB_SSB_REQ_ATTR 0x00000018 /* Slave Reques Attribute number */ ++#define PCIE_AHB_SSB_REQ_ATTR_S 3 ++#define PCIE_AHB_SSB_REQ_TC 0x000000E0 /* Slave Request TC Field */ ++#define PCIE_AHB_SSB_REQ_TC_S 5 ++ ++/* AHB Master SideBand Ctrl Register */ ++#define PCIE_AHB_MSB(X) (volatile u32*)(PCIE_APP_PORT_TO_BASE(X) + 0x74) ++#define PCIE_AHB_MSB_RESP_ATTR 0x00000003 /* Master Response Attribute number */ ++#define PCIE_AHB_MSB_RESP_ATTR_S 0 ++#define PCIE_AHB_MSB_RESP_BAD_EOT 0x00000004 /* Master Response Badeot filed */ ++#define PCIE_AHB_MSB_RESP_BCM 0x00000008 /* Master Response BCM filed */ ++#define PCIE_AHB_MSB_RESP_EP 0x00000010 /* Master Response EP filed */ ++#define PCIE_AHB_MSB_RESP_TD 0x00000020 /* Master Response TD filed */ ++#define PCIE_AHB_MSB_RESP_FUN_NUM 0x000003C0 /* Master Response Function number */ ++#define PCIE_AHB_MSB_RESP_FUN_NUM_S 6 ++ ++/* AHB Control Register, fixed bus enumeration exception */ ++#define PCIE_AHB_CTRL(X) (volatile u32*)(PCIE_APP_PORT_TO_BASE(X) + 0x78) ++#define PCIE_AHB_CTRL_BUS_ERROR_SUPPRESS 0x00000001 ++ ++/* Interrupt Enalbe Register */ ++#define PCIE_IRNEN(X) (volatile u32*)(PCIE_APP_PORT_TO_BASE(X) + 0xF4) ++#define PCIE_IRNCR(X) (volatile u32*)(PCIE_APP_PORT_TO_BASE(X) + 0xF8) ++#define PCIE_IRNICR(X) (volatile u32*)(PCIE_APP_PORT_TO_BASE(X) + 0xFC) ++ ++/* PCIe interrupt enable/control/capture register definition */ ++#define PCIE_IRN_AER_REPORT 0x00000001 /* AER Interrupt */ ++#define PCIE_IRN_AER_MSIX 0x00000002 /* Advanced Error MSI-X Interrupt */ ++#define PCIE_IRN_PME 0x00000004 /* PME Interrupt */ ++#define PCIE_IRN_HOTPLUG 0x00000008 /* Hotplug Interrupt */ ++#define PCIE_IRN_RX_VDM_MSG 0x00000010 /* Vendor-Defined Message Interrupt */ ++#define PCIE_IRN_RX_CORRECTABLE_ERR_MSG 0x00000020 /* Correctable Error Message Interrupt */ ++#define PCIE_IRN_RX_NON_FATAL_ERR_MSG 0x00000040 /* Non-fatal Error Message */ ++#define PCIE_IRN_RX_FATAL_ERR_MSG 0x00000080 /* Fatal Error Message */ ++#define PCIE_IRN_RX_PME_MSG 0x00000100 /* PME Message Interrupt */ ++#define PCIE_IRN_RX_PME_TURNOFF_ACK 0x00000200 /* PME Turnoff Ack Message Interrupt */ ++#define PCIE_IRN_AHB_BR_FATAL_ERR 0x00000400 /* AHB Fatal Error Interrupt */ ++#define PCIE_IRN_LINK_AUTO_BW_STATUS 0x00000800 /* Link Auto Bandwidth Status Interrupt */ ++#define PCIE_IRN_BW_MGT 0x00001000 /* Bandwidth Managment Interrupt */ ++#define PCIE_IRN_INTA 0x00002000 /* INTA */ ++#define PCIE_IRN_INTB 0x00004000 /* INTB */ ++#define PCIE_IRN_INTC 0x00008000 /* INTC */ ++#define PCIE_IRN_INTD 0x00010000 /* INTD */ ++#define PCIE_IRN_WAKEUP 0x00020000 /* Wake up Interrupt */ ++ ++#define PCIE_RC_CORE_COMBINED_INT (PCIE_IRN_AER_REPORT | PCIE_IRN_AER_MSIX | PCIE_IRN_PME | \ ++ PCIE_IRN_HOTPLUG | PCIE_IRN_RX_VDM_MSG | PCIE_IRN_RX_CORRECTABLE_ERR_MSG |\ ++ PCIE_IRN_RX_NON_FATAL_ERR_MSG | PCIE_IRN_RX_FATAL_ERR_MSG | \ ++ PCIE_IRN_RX_PME_MSG | PCIE_IRN_RX_PME_TURNOFF_ACK | PCIE_IRN_AHB_BR_FATAL_ERR | \ ++ PCIE_IRN_LINK_AUTO_BW_STATUS | PCIE_IRN_BW_MGT) ++/* PCIe RC Configuration Register */ ++#define PCIE_VDID(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x00) ++ ++/* Bit definition from pci_reg.h */ ++#define PCIE_PCICMDSTS(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x04) ++#define PCIE_CCRID(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x08) ++#define PCIE_CLSLTHTBR(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x0C) /* EP only */ ++/* BAR0, BAR1,Only necessary if the bridges implements a device-specific register set or memory buffer */ ++#define PCIE_BAR0(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x10) /* Not used*/ ++#define PCIE_BAR1(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x14) /* Not used */ ++ ++#define PCIE_BNR(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x18) /* Mandatory */ ++/* Bus Number Register bits */ ++#define PCIE_BNR_PRIMARY_BUS_NUM 0x000000FF ++#define PCIE_BNR_PRIMARY_BUS_NUM_S 0 ++#define PCIE_PNR_SECONDARY_BUS_NUM 0x0000FF00 ++#define PCIE_PNR_SECONDARY_BUS_NUM_S 8 ++#define PCIE_PNR_SUB_BUS_NUM 0x00FF0000 ++#define PCIE_PNR_SUB_BUS_NUM_S 16 ++ ++/* IO Base/Limit Register bits */ ++#define PCIE_IOBLSECS(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x1C) /* RC only */ ++#define PCIE_IOBLSECS_32BIT_IO_ADDR 0x00000001 ++#define PCIE_IOBLSECS_IO_BASE_ADDR 0x000000F0 ++#define PCIE_IOBLSECS_IO_BASE_ADDR_S 4 ++#define PCIE_IOBLSECS_32BIT_IOLIMT 0x00000100 ++#define PCIE_IOBLSECS_IO_LIMIT_ADDR 0x0000F000 ++#define PCIE_IOBLSECS_IO_LIMIT_ADDR_S 12 ++ ++/* Non-prefetchable Memory Base/Limit Register bit */ ++#define PCIE_MBML(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x20) /* RC only */ ++#define PCIE_MBML_MEM_BASE_ADDR 0x0000FFF0 ++#define PCIE_MBML_MEM_BASE_ADDR_S 4 ++#define PCIE_MBML_MEM_LIMIT_ADDR 0xFFF00000 ++#define PCIE_MBML_MEM_LIMIT_ADDR_S 20 ++ ++/* Prefetchable Memory Base/Limit Register bit */ ++#define PCIE_PMBL(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x24) /* RC only */ ++#define PCIE_PMBL_64BIT_ADDR 0x00000001 ++#define PCIE_PMBL_UPPER_12BIT 0x0000FFF0 ++#define PCIE_PMBL_UPPER_12BIT_S 4 ++#define PCIE_PMBL_E64MA 0x00010000 ++#define PCIE_PMBL_END_ADDR 0xFFF00000 ++#define PCIE_PMBL_END_ADDR_S 20 ++#define PCIE_PMBU32(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x28) /* RC only */ ++#define PCIE_PMLU32(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x2C) /* RC only */ ++ ++/* I/O Base/Limit Upper 16 bits register */ ++#define PCIE_IO_BANDL(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x30) /* RC only */ ++#define PCIE_IO_BANDL_UPPER_16BIT_IO_BASE 0x0000FFFF ++#define PCIE_IO_BANDL_UPPER_16BIT_IO_BASE_S 0 ++#define PCIE_IO_BANDL_UPPER_16BIT_IO_LIMIT 0xFFFF0000 ++#define PCIE_IO_BANDL_UPPER_16BIT_IO_LIMIT_S 16 ++ ++#define PCIE_CPR(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x34) ++#define PCIE_EBBAR(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x38) ++ ++/* Interrupt and Secondary Bridge Control Register */ ++#define PCIE_INTRBCTRL(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x3C) ++ ++#define PCIE_INTRBCTRL_INT_LINE 0x000000FF ++#define PCIE_INTRBCTRL_INT_LINE_S 0 ++#define PCIE_INTRBCTRL_INT_PIN 0x0000FF00 ++#define PCIE_INTRBCTRL_INT_PIN_S 8 ++#define PCIE_INTRBCTRL_PARITY_ERR_RESP_ENABLE 0x00010000 /* #PERR */ ++#define PCIE_INTRBCTRL_SERR_ENABLE 0x00020000 /* #SERR */ ++#define PCIE_INTRBCTRL_ISA_ENABLE 0x00040000 /* ISA enable, IO 64KB only */ ++#define PCIE_INTRBCTRL_VGA_ENABLE 0x00080000 /* VGA enable */ ++#define PCIE_INTRBCTRL_VGA_16BIT_DECODE 0x00100000 /* VGA 16bit decode */ ++#define PCIE_INTRBCTRL_RST_SECONDARY_BUS 0x00400000 /* Secondary bus rest, hot rest, 1ms */ ++/* Others are read only */ ++enum { ++ PCIE_INTRBCTRL_INT_NON = 0, ++ PCIE_INTRBCTRL_INTA, ++ PCIE_INTRBCTRL_INTB, ++ PCIE_INTRBCTRL_INTC, ++ PCIE_INTRBCTRL_INTD, ++}; ++ ++#define PCIE_PM_CAPR(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x40) ++ ++/* Power Management Control and Status Register */ ++#define PCIE_PM_CSR(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x44) ++ ++#define PCIE_PM_CSR_POWER_STATE 0x00000003 /* Power State */ ++#define PCIE_PM_CSR_POWER_STATE_S 0 ++#define PCIE_PM_CSR_SW_RST 0x00000008 /* Soft Reset Enabled */ ++#define PCIE_PM_CSR_PME_ENABLE 0x00000100 /* PME Enable */ ++#define PCIE_PM_CSR_PME_STATUS 0x00008000 /* PME status */ ++ ++/* MSI Capability Register for EP */ ++#define PCIE_MCAPR(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x50) ++ ++#define PCIE_MCAPR_MSI_CAP_ID 0x000000FF /* MSI Capability ID */ ++#define PCIE_MCAPR_MSI_CAP_ID_S 0 ++#define PCIE_MCAPR_MSI_NEXT_CAP_PTR 0x0000FF00 /* Next Capability Pointer */ ++#define PCIE_MCAPR_MSI_NEXT_CAP_PTR_S 8 ++#define PCIE_MCAPR_MSI_ENABLE 0x00010000 /* MSI Enable */ ++#define PCIE_MCAPR_MULTI_MSG_CAP 0x000E0000 /* Multiple Message Capable */ ++#define PCIE_MCAPR_MULTI_MSG_CAP_S 17 ++#define PCIE_MCAPR_MULTI_MSG_ENABLE 0x00700000 /* Multiple Message Enable */ ++#define PCIE_MCAPR_MULTI_MSG_ENABLE_S 20 ++#define PCIE_MCAPR_ADDR64_CAP 0X00800000 /* 64-bit Address Capable */ ++ ++/* MSI Message Address Register */ ++#define PCIE_MA(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x54) ++ ++#define PCIE_MA_ADDR_MASK 0xFFFFFFFC /* Message Address */ ++ ++/* MSI Message Upper Address Register */ ++#define PCIE_MUA(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x58) ++ ++/* MSI Message Data Register */ ++#define PCIE_MD(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x5C) ++ ++#define PCIE_MD_DATA 0x0000FFFF /* Message Data */ ++#define PCIE_MD_DATA_S 0 ++ ++/* PCI Express Capability Register */ ++#define PCIE_XCAP(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x70) ++ ++#define PCIE_XCAP_ID 0x000000FF /* PCI Express Capability ID */ ++#define PCIE_XCAP_ID_S 0 ++#define PCIE_XCAP_NEXT_CAP 0x0000FF00 /* Next Capability Pointer */ ++#define PCIE_XCAP_NEXT_CAP_S 8 ++#define PCIE_XCAP_VER 0x000F0000 /* PCI Express Capability Version */ ++#define PCIE_XCAP_VER_S 16 ++#define PCIE_XCAP_DEV_PORT_TYPE 0x00F00000 /* Device Port Type */ ++#define PCIE_XCAP_DEV_PORT_TYPE_S 20 ++#define PCIE_XCAP_SLOT_IMPLEMENTED 0x01000000 /* Slot Implemented */ ++#define PCIE_XCAP_MSG_INT_NUM 0x3E000000 /* Interrupt Message Number */ ++#define PCIE_XCAP_MSG_INT_NUM_S 25 ++ ++/* Device Capability Register */ ++#define PCIE_DCAP(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x74) ++ ++#define PCIE_DCAP_MAX_PAYLOAD_SIZE 0x00000007 /* Max Payload size */ ++#define PCIE_DCAP_MAX_PAYLOAD_SIZE_S 0 ++#define PCIE_DCAP_PHANTOM_FUNC 0x00000018 /* Phanton Function, not supported */ ++#define PCIE_DCAP_PHANTOM_FUNC_S 3 ++#define PCIE_DCAP_EXT_TAG 0x00000020 /* Extended Tag Field */ ++#define PCIE_DCAP_EP_L0S_LATENCY 0x000001C0 /* EP L0s latency only */ ++#define PCIE_DCAP_EP_L0S_LATENCY_S 6 ++#define PCIE_DCAP_EP_L1_LATENCY 0x00000E00 /* EP L1 latency only */ ++#define PCIE_DCAP_EP_L1_LATENCY_S 9 ++#define PCIE_DCAP_ROLE_BASE_ERR_REPORT 0x00008000 /* Role Based ERR */ ++ ++/* Maximum payload size supported */ ++enum { ++ PCIE_MAX_PAYLOAD_128 = 0, ++ PCIE_MAX_PAYLOAD_256, ++ PCIE_MAX_PAYLOAD_512, ++ PCIE_MAX_PAYLOAD_1024, ++ PCIE_MAX_PAYLOAD_2048, ++ PCIE_MAX_PAYLOAD_4096, ++}; ++ ++/* Device Control and Status Register */ ++#define PCIE_DCTLSTS(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x78) ++ ++#define PCIE_DCTLSTS_CORRECTABLE_ERR_EN 0x00000001 /* COR-ERR */ ++#define PCIE_DCTLSTS_NONFATAL_ERR_EN 0x00000002 /* Non-fatal ERR */ ++#define PCIE_DCTLSTS_FATAL_ERR_EN 0x00000004 /* Fatal ERR */ ++#define PCIE_DCTLSYS_UR_REQ_EN 0x00000008 /* UR ERR */ ++#define PCIE_DCTLSTS_RELAXED_ORDERING_EN 0x00000010 /* Enable relaxing ordering */ ++#define PCIE_DCTLSTS_MAX_PAYLOAD_SIZE 0x000000E0 /* Max payload mask */ ++#define PCIE_DCTLSTS_MAX_PAYLOAD_SIZE_S 5 ++#define PCIE_DCTLSTS_EXT_TAG_EN 0x00000100 /* Extended tag field */ ++#define PCIE_DCTLSTS_PHANTOM_FUNC_EN 0x00000200 /* Phantom Function Enable */ ++#define PCIE_DCTLSTS_AUX_PM_EN 0x00000400 /* AUX Power PM Enable */ ++#define PCIE_DCTLSTS_NO_SNOOP_EN 0x00000800 /* Enable no snoop, except root port*/ ++#define PCIE_DCTLSTS_MAX_READ_SIZE 0x00007000 /* Max Read Request size*/ ++#define PCIE_DCTLSTS_MAX_READ_SIZE_S 12 ++#define PCIE_DCTLSTS_CORRECTABLE_ERR 0x00010000 /* COR-ERR Detected */ ++#define PCIE_DCTLSTS_NONFATAL_ERR 0x00020000 /* Non-Fatal ERR Detected */ ++#define PCIE_DCTLSTS_FATAL_ER 0x00040000 /* Fatal ERR Detected */ ++#define PCIE_DCTLSTS_UNSUPPORTED_REQ 0x00080000 /* UR Detected */ ++#define PCIE_DCTLSTS_AUX_POWER 0x00100000 /* Aux Power Detected */ ++#define PCIE_DCTLSTS_TRANSACT_PENDING 0x00200000 /* Transaction pending */ ++ ++#define PCIE_DCTLSTS_ERR_EN (PCIE_DCTLSTS_CORRECTABLE_ERR_EN | \ ++ PCIE_DCTLSTS_NONFATAL_ERR_EN | PCIE_DCTLSTS_FATAL_ERR_EN | \ ++ PCIE_DCTLSYS_UR_REQ_EN) ++ ++/* Link Capability Register */ ++#define PCIE_LCAP(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x7C) ++#define PCIE_LCAP_MAX_LINK_SPEED 0x0000000F /* Max link speed, 0x1 by default */ ++#define PCIE_LCAP_MAX_LINK_SPEED_S 0 ++#define PCIE_LCAP_MAX_LENGTH_WIDTH 0x000003F0 /* Maxium Length Width */ ++#define PCIE_LCAP_MAX_LENGTH_WIDTH_S 4 ++#define PCIE_LCAP_ASPM_LEVEL 0x00000C00 /* Active State Link PM Support */ ++#define PCIE_LCAP_ASPM_LEVEL_S 10 ++#define PCIE_LCAP_L0S_EIXT_LATENCY 0x00007000 /* L0s Exit Latency */ ++#define PCIE_LCAP_L0S_EIXT_LATENCY_S 12 ++#define PCIE_LCAP_L1_EXIT_LATENCY 0x00038000 /* L1 Exit Latency */ ++#define PCIE_LCAP_L1_EXIT_LATENCY_S 15 ++#define PCIE_LCAP_CLK_PM 0x00040000 /* Clock Power Management */ ++#define PCIE_LCAP_SDER 0x00080000 /* Surprise Down Error Reporting */ ++#define PCIE_LCAP_DLL_ACTIVE_REPROT 0x00100000 /* Data Link Layer Active Reporting Capable */ ++#define PCIE_LCAP_PORT_NUM 0xFF0000000 /* Port number */ ++#define PCIE_LCAP_PORT_NUM_S 24 ++ ++/* Maximum Length width definition */ ++#define PCIE_MAX_LENGTH_WIDTH_RES 0x00 ++#define PCIE_MAX_LENGTH_WIDTH_X1 0x01 /* Default */ ++#define PCIE_MAX_LENGTH_WIDTH_X2 0x02 ++#define PCIE_MAX_LENGTH_WIDTH_X4 0x04 ++#define PCIE_MAX_LENGTH_WIDTH_X8 0x08 ++#define PCIE_MAX_LENGTH_WIDTH_X12 0x0C ++#define PCIE_MAX_LENGTH_WIDTH_X16 0x10 ++#define PCIE_MAX_LENGTH_WIDTH_X32 0x20 ++ ++/* Active State Link PM definition */ ++enum { ++ PCIE_ASPM_RES0 = 0, ++ PCIE_ASPM_L0S_ENTRY_SUPPORT, /* L0s */ ++ PCIE_ASPM_RES1, ++ PCIE_ASPM_L0S_L1_ENTRY_SUPPORT, /* L0s and L1, default */ ++}; ++ ++/* L0s Exit Latency definition */ ++enum { ++ PCIE_L0S_EIXT_LATENCY_L64NS = 0, /* < 64 ns */ ++ PCIE_L0S_EIXT_LATENCY_B64A128, /* > 64 ns < 128 ns */ ++ PCIE_L0S_EIXT_LATENCY_B128A256, /* > 128 ns < 256 ns */ ++ PCIE_L0S_EIXT_LATENCY_B256A512, /* > 256 ns < 512 ns */ ++ PCIE_L0S_EIXT_LATENCY_B512TO1U, /* > 512 ns < 1 us */ ++ PCIE_L0S_EIXT_LATENCY_B1A2U, /* > 1 us < 2 us */ ++ PCIE_L0S_EIXT_LATENCY_B2A4U, /* > 2 us < 4 us */ ++ PCIE_L0S_EIXT_LATENCY_M4US, /* > 4 us */ ++}; ++ ++/* L1 Exit Latency definition */ ++enum { ++ PCIE_L1_EXIT_LATENCY_L1US = 0, /* < 1 us */ ++ PCIE_L1_EXIT_LATENCY_B1A2, /* > 1 us < 2 us */ ++ PCIE_L1_EXIT_LATENCY_B2A4, /* > 2 us < 4 us */ ++ PCIE_L1_EXIT_LATENCY_B4A8, /* > 4 us < 8 us */ ++ PCIE_L1_EXIT_LATENCY_B8A16, /* > 8 us < 16 us */ ++ PCIE_L1_EXIT_LATENCY_B16A32, /* > 16 us < 32 us */ ++ PCIE_L1_EXIT_LATENCY_B32A64, /* > 32 us < 64 us */ ++ PCIE_L1_EXIT_LATENCY_M64US, /* > 64 us */ ++}; ++ ++/* Link Control and Status Register */ ++#define PCIE_LCTLSTS(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x80) ++#define PCIE_LCTLSTS_ASPM_ENABLE 0x00000003 /* Active State Link PM Control */ ++#define PCIE_LCTLSTS_ASPM_ENABLE_S 0 ++#define PCIE_LCTLSTS_RCB128 0x00000008 /* Read Completion Boundary 128*/ ++#define PCIE_LCTLSTS_LINK_DISABLE 0x00000010 /* Link Disable */ ++#define PCIE_LCTLSTS_RETRIAN_LINK 0x00000020 /* Retrain Link */ ++#define PCIE_LCTLSTS_COM_CLK_CFG 0x00000040 /* Common Clock Configuration */ ++#define PCIE_LCTLSTS_EXT_SYNC 0x00000080 /* Extended Synch */ ++#define PCIE_LCTLSTS_CLK_PM_EN 0x00000100 /* Enable Clock Powerm Management */ ++#define PCIE_LCTLSTS_LINK_SPEED 0x000F0000 /* Link Speed */ ++#define PCIE_LCTLSTS_LINK_SPEED_S 16 ++#define PCIE_LCTLSTS_NEGOTIATED_LINK_WIDTH 0x03F00000 /* Negotiated Link Width */ ++#define PCIE_LCTLSTS_NEGOTIATED_LINK_WIDTH_S 20 ++#define PCIE_LCTLSTS_RETRAIN_PENDING 0x08000000 /* Link training is ongoing */ ++#define PCIE_LCTLSTS_SLOT_CLK_CFG 0x10000000 /* Slot Clock Configuration */ ++#define PCIE_LCTLSTS_DLL_ACTIVE 0x20000000 /* Data Link Layer Active */ ++ ++/* Slot Capabilities Register */ ++#define PCIE_SLCAP(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x84) ++ ++/* Slot Capabilities */ ++#define PCIE_SLCTLSTS(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x88) ++ ++/* Root Control and Capability Register */ ++#define PCIE_RCTLCAP(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x8C) ++#define PCIE_RCTLCAP_SERR_ON_CORRECTABLE_ERR 0x00000001 /* #SERR on COR-ERR */ ++#define PCIE_RCTLCAP_SERR_ON_NONFATAL_ERR 0x00000002 /* #SERR on Non-Fatal ERR */ ++#define PCIE_RCTLCAP_SERR_ON_FATAL_ERR 0x00000004 /* #SERR on Fatal ERR */ ++#define PCIE_RCTLCAP_PME_INT_EN 0x00000008 /* PME Interrupt Enable */ ++#define PCIE_RCTLCAP_SERR_ENABLE (PCIE_RCTLCAP_SERR_ON_CORRECTABLE_ERR | \ ++ PCIE_RCTLCAP_SERR_ON_NONFATAL_ERR | PCIE_RCTLCAP_SERR_ON_FATAL_ERR) ++/* Root Status Register */ ++#define PCIE_RSTS(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x90) ++#define PCIE_RSTS_PME_REQ_ID 0x0000FFFF /* PME Request ID */ ++#define PCIE_RSTS_PME_REQ_ID_S 0 ++#define PCIE_RSTS_PME_STATUS 0x00010000 /* PME Status */ ++#define PCIE_RSTS_PME_PENDING 0x00020000 /* PME Pending */ ++ ++/* PCI Express Enhanced Capability Header */ ++#define PCIE_ENHANCED_CAP(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x100) ++#define PCIE_ENHANCED_CAP_ID 0x0000FFFF /* PCI Express Extended Capability ID */ ++#define PCIE_ENHANCED_CAP_ID_S 0 ++#define PCIE_ENHANCED_CAP_VER 0x000F0000 /* Capability Version */ ++#define PCIE_ENHANCED_CAP_VER_S 16 ++#define PCIE_ENHANCED_CAP_NEXT_OFFSET 0xFFF00000 /* Next Capability Offset */ ++#define PCIE_ENHANCED_CAP_NEXT_OFFSET_S 20 ++ ++/* Uncorrectable Error Status Register */ ++#define PCIE_UES_R(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x104) ++#define PCIE_DATA_LINK_PROTOCOL_ERR 0x00000010 /* Data Link Protocol Error Status */ ++#define PCIE_SURPRISE_DOWN_ERROR 0x00000020 /* Surprise Down Error Status */ ++#define PCIE_POISONED_TLP 0x00001000 /* Poisoned TLP Status */ ++#define PCIE_FC_PROTOCOL_ERR 0x00002000 /* Flow Control Protocol Error Status */ ++#define PCIE_COMPLETION_TIMEOUT 0x00004000 /* Completion Timeout Status */ ++#define PCIE_COMPLETOR_ABORT 0x00008000 /* Completer Abort Error */ ++#define PCIE_UNEXPECTED_COMPLETION 0x00010000 /* Unexpected Completion Status */ ++#define PCIE_RECEIVER_OVERFLOW 0x00020000 /* Receive Overflow Status */ ++#define PCIE_MALFORNED_TLP 0x00040000 /* Malformed TLP Stauts */ ++#define PCIE_ECRC_ERR 0x00080000 /* ECRC Error Stauts */ ++#define PCIE_UR_REQ 0x00100000 /* Unsupported Request Error Status */ ++#define PCIE_ALL_UNCORRECTABLE_ERR (PCIE_DATA_LINK_PROTOCOL_ERR | PCIE_SURPRISE_DOWN_ERROR | \ ++ PCIE_POISONED_TLP | PCIE_FC_PROTOCOL_ERR | PCIE_COMPLETION_TIMEOUT | \ ++ PCIE_COMPLETOR_ABORT | PCIE_UNEXPECTED_COMPLETION | PCIE_RECEIVER_OVERFLOW |\ ++ PCIE_MALFORNED_TLP | PCIE_ECRC_ERR | PCIE_UR_REQ) ++ ++/* Uncorrectable Error Mask Register, Mask means no report */ ++#define PCIE_UEMR(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x108) ++ ++/* Uncorrectable Error Severity Register */ ++#define PCIE_UESR(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x10C) ++ ++/* Correctable Error Status Register */ ++#define PCIE_CESR(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x110) ++#define PCIE_RX_ERR 0x00000001 /* Receive Error Status */ ++#define PCIE_BAD_TLP 0x00000040 /* Bad TLP Status */ ++#define PCIE_BAD_DLLP 0x00000080 /* Bad DLLP Status */ ++#define PCIE_REPLAY_NUM_ROLLOVER 0x00000100 /* Replay Number Rollover Status */ ++#define PCIE_REPLAY_TIMER_TIMEOUT_ERR 0x00001000 /* Reply Timer Timeout Status */ ++#define PCIE_ADVISORY_NONFTAL_ERR 0x00002000 /* Advisory Non-Fatal Error Status */ ++#define PCIE_CORRECTABLE_ERR (PCIE_RX_ERR | PCIE_BAD_TLP | PCIE_BAD_DLLP | PCIE_REPLAY_NUM_ROLLOVER |\ ++ PCIE_REPLAY_TIMER_TIMEOUT_ERR | PCIE_ADVISORY_NONFTAL_ERR) ++ ++/* Correctable Error Mask Register */ ++#define PCIE_CEMR(X) (volatile u32*)(PCIE_RC_CFG_BASE + 0x114) ++ ++/* Advanced Error Capabilities and Control Register */ ++#define PCIE_AECCR(X) (volatile u32*)(PCIE_RC_CFG_BASE + 0x118) ++#define PCIE_AECCR_FIRST_ERR_PTR 0x0000001F /* First Error Pointer */ ++#define PCIE_AECCR_FIRST_ERR_PTR_S 0 ++#define PCIE_AECCR_ECRC_GEN_CAP 0x00000020 /* ECRC Generation Capable */ ++#define PCIE_AECCR_ECRC_GEN_EN 0x00000040 /* ECRC Generation Enable */ ++#define PCIE_AECCR_ECRC_CHECK_CAP 0x00000080 /* ECRC Check Capable */ ++#define PCIE_AECCR_ECRC_CHECK_EN 0x00000100 /* ECRC Check Enable */ ++ ++/* Header Log Register 1 */ ++#define PCIE_HLR1(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x11C) ++ ++/* Header Log Register 2 */ ++#define PCIE_HLR2(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x120) ++ ++/* Header Log Register 3 */ ++#define PCIE_HLR3(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x124) ++ ++/* Header Log Register 4 */ ++#define PCIE_HLR4(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x128) ++ ++/* Root Error Command Register */ ++#define PCIE_RECR(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x12C) ++#define PCIE_RECR_CORRECTABLE_ERR_REPORT_EN 0x00000001 /* COR-ERR */ ++#define PCIE_RECR_NONFATAL_ERR_REPORT_EN 0x00000002 /* Non-Fatal ERR */ ++#define PCIE_RECR_FATAL_ERR_REPORT_EN 0x00000004 /* Fatal ERR */ ++#define PCIE_RECR_ERR_REPORT_EN (PCIE_RECR_CORRECTABLE_ERR_REPORT_EN | \ ++ PCIE_RECR_NONFATAL_ERR_REPORT_EN | PCIE_RECR_FATAL_ERR_REPORT_EN) ++ ++/* Root Error Status Register */ ++#define PCIE_RESR(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x130) ++#define PCIE_RESR_CORRECTABLE_ERR 0x00000001 /* COR-ERR Receveid */ ++#define PCIE_RESR_MULTI_CORRECTABLE_ERR 0x00000002 /* Multiple COR-ERR Received */ ++#define PCIE_RESR_FATAL_NOFATAL_ERR 0x00000004 /* ERR Fatal/Non-Fatal Received */ ++#define PCIE_RESR_MULTI_FATAL_NOFATAL_ERR 0x00000008 /* Multiple ERR Fatal/Non-Fatal Received */ ++#define PCIE_RESR_FIRST_UNCORRECTABLE_FATAL_ERR 0x00000010 /* First UN-COR Fatal */ ++#define PCIR_RESR_NON_FATAL_ERR 0x00000020 /* Non-Fatal Error Message Received */ ++#define PCIE_RESR_FATAL_ERR 0x00000040 /* Fatal Message Received */ ++#define PCIE_RESR_AER_INT_MSG_NUM 0xF8000000 /* Advanced Error Interrupt Message Number */ ++#define PCIE_RESR_AER_INT_MSG_NUM_S 27 ++ ++/* Error Source Indentification Register */ ++#define PCIE_ESIR(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x134) ++#define PCIE_ESIR_CORRECTABLE_ERR_SRC_ID 0x0000FFFF ++#define PCIE_ESIR_CORRECTABLE_ERR_SRC_ID_S 0 ++#define PCIE_ESIR_FATAL_NON_FATAL_SRC_ID 0xFFFF0000 ++#define PCIE_ESIR_FATAL_NON_FATAL_SRC_ID_S 16 ++ ++/* VC Enhanced Capability Header */ ++#define PCIE_VC_ECH(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x140) ++ ++/* Port VC Capability Register */ ++#define PCIE_PVC1(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x144) ++#define PCIE_PVC1_EXT_VC_CNT 0x00000007 /* Extended VC Count */ ++#define PCIE_PVC1_EXT_VC_CNT_S 0 ++#define PCIE_PVC1_LOW_PRI_EXT_VC_CNT 0x00000070 /* Low Priority Extended VC Count */ ++#define PCIE_PVC1_LOW_PRI_EXT_VC_CNT_S 4 ++#define PCIE_PVC1_REF_CLK 0x00000300 /* Reference Clock */ ++#define PCIE_PVC1_REF_CLK_S 8 ++#define PCIE_PVC1_PORT_ARB_TAB_ENTRY_SIZE 0x00000C00 /* Port Arbitration Table Entry Size */ ++#define PCIE_PVC1_PORT_ARB_TAB_ENTRY_SIZE_S 10 ++ ++/* Extended Virtual Channel Count Defintion */ ++#define PCIE_EXT_VC_CNT_MIN 0 ++#define PCIE_EXT_VC_CNT_MAX 7 ++ ++/* Port Arbitration Table Entry Size Definition */ ++enum { ++ PCIE_PORT_ARB_TAB_ENTRY_SIZE_S1BIT = 0, ++ PCIE_PORT_ARB_TAB_ENTRY_SIZE_S2BIT, ++ PCIE_PORT_ARB_TAB_ENTRY_SIZE_S4BIT, ++ PCIE_PORT_ARB_TAB_ENTRY_SIZE_S8BIT, ++}; ++ ++/* Port VC Capability Register 2 */ ++#define PCIE_PVC2(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x148) ++#define PCIE_PVC2_VC_ARB_16P_FIXED_WRR 0x00000001 /* HW Fixed arbitration, 16 phase WRR */ ++#define PCIE_PVC2_VC_ARB_32P_WRR 0x00000002 /* 32 phase WRR */ ++#define PCIE_PVC2_VC_ARB_64P_WRR 0x00000004 /* 64 phase WRR */ ++#define PCIE_PVC2_VC_ARB_128P_WRR 0x00000008 /* 128 phase WRR */ ++#define PCIE_PVC2_VC_ARB_WRR 0x0000000F ++#define PCIE_PVC2_VC_ARB_TAB_OFFSET 0xFF000000 /* VC arbitration table offset, not support */ ++#define PCIE_PVC2_VC_ARB_TAB_OFFSET_S 24 ++ ++/* Port VC Control and Status Register */ ++#define PCIE_PVCCRSR(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x14C) ++#define PCIE_PVCCRSR_LOAD_VC_ARB_TAB 0x00000001 /* Load VC Arbitration Table */ ++#define PCIE_PVCCRSR_VC_ARB_SEL 0x0000000E /* VC Arbitration Select */ ++#define PCIE_PVCCRSR_VC_ARB_SEL_S 1 ++#define PCIE_PVCCRSR_VC_ARB_TAB_STATUS 0x00010000 /* Arbitration Status */ ++ ++/* VC0 Resource Capability Register */ ++#define PCIE_VC0_RC(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x150) ++#define PCIE_VC0_RC_PORT_ARB_HW_FIXED 0x00000001 /* HW Fixed arbitration */ ++#define PCIE_VC0_RC_PORT_ARB_32P_WRR 0x00000002 /* 32 phase WRR */ ++#define PCIE_VC0_RC_PORT_ARB_64P_WRR 0x00000004 /* 64 phase WRR */ ++#define PCIE_VC0_RC_PORT_ARB_128P_WRR 0x00000008 /* 128 phase WRR */ ++#define PCIE_VC0_RC_PORT_ARB_TM_128P_WRR 0x00000010 /* Time-based 128 phase WRR */ ++#define PCIE_VC0_RC_PORT_ARB_TM_256P_WRR 0x00000020 /* Time-based 256 phase WRR */ ++#define PCIE_VC0_RC_PORT_ARB (PCIE_VC0_RC_PORT_ARB_HW_FIXED | PCIE_VC0_RC_PORT_ARB_32P_WRR |\ ++ PCIE_VC0_RC_PORT_ARB_64P_WRR | PCIE_VC0_RC_PORT_ARB_128P_WRR | \ ++ PCIE_VC0_RC_PORT_ARB_TM_128P_WRR | PCIE_VC0_RC_PORT_ARB_TM_256P_WRR) ++ ++#define PCIE_VC0_RC_REJECT_SNOOP 0x00008000 /* Reject Snoop Transactioin */ ++#define PCIE_VC0_RC_MAX_TIMESLOTS 0x007F0000 /* Maximum time Slots */ ++#define PCIE_VC0_RC_MAX_TIMESLOTS_S 16 ++#define PCIE_VC0_RC_PORT_ARB_TAB_OFFSET 0xFF000000 /* Port Arbitration Table Offset */ ++#define PCIE_VC0_RC_PORT_ARB_TAB_OFFSET_S 24 ++ ++/* VC0 Resource Control Register */ ++#define PCIE_VC0_RC0(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x154) ++#define PCIE_VC0_RC0_TVM0 0x00000001 /* TC0 and VC0 */ ++#define PCIE_VC0_RC0_TVM1 0x00000002 /* TC1 and VC1 */ ++#define PCIE_VC0_RC0_TVM2 0x00000004 /* TC2 and VC2 */ ++#define PCIE_VC0_RC0_TVM3 0x00000008 /* TC3 and VC3 */ ++#define PCIE_VC0_RC0_TVM4 0x00000010 /* TC4 and VC4 */ ++#define PCIE_VC0_RC0_TVM5 0x00000020 /* TC5 and VC5 */ ++#define PCIE_VC0_RC0_TVM6 0x00000040 /* TC6 and VC6 */ ++#define PCIE_VC0_RC0_TVM7 0x00000080 /* TC7 and VC7 */ ++#define PCIE_VC0_RC0_TC_VC 0x000000FF /* TC/VC mask */ ++ ++#define PCIE_VC0_RC0_LOAD_PORT_ARB_TAB 0x00010000 /* Load Port Arbitration Table */ ++#define PCIE_VC0_RC0_PORT_ARB_SEL 0x000E0000 /* Port Arbitration Select */ ++#define PCIE_VC0_RC0_PORT_ARB_SEL_S 17 ++#define PCIE_VC0_RC0_VC_ID 0x07000000 /* VC ID */ ++#define PCIE_VC0_RC0_VC_ID_S 24 ++#define PCIE_VC0_RC0_VC_EN 0x80000000 /* VC Enable */ ++ ++/* VC0 Resource Status Register */ ++#define PCIE_VC0_RSR0(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x158) ++#define PCIE_VC0_RSR0_PORT_ARB_TAB_STATUS 0x00010000 /* Port Arbitration Table Status,not used */ ++#define PCIE_VC0_RSR0_VC_NEG_PENDING 0x00020000 /* VC Negotiation Pending */ ++ ++/* Ack Latency Timer and Replay Timer Register */ ++#define PCIE_ALTRT(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x700) ++#define PCIE_ALTRT_ROUND_TRIP_LATENCY_LIMIT 0x0000FFFF /* Round Trip Latency Time Limit */ ++#define PCIE_ALTRT_ROUND_TRIP_LATENCY_LIMIT_S 0 ++#define PCIE_ALTRT_REPLAY_TIME_LIMIT 0xFFFF0000 /* Replay Time Limit */ ++#define PCIE_ALTRT_REPLAY_TIME_LIMIT_S 16 ++ ++/* Other Message Register */ ++#define PCIE_OMR(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x704) ++ ++/* Port Force Link Register */ ++#define PCIE_PFLR(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x708) ++#define PCIE_PFLR_LINK_NUM 0x000000FF /* Link Number */ ++#define PCIE_PFLR_LINK_NUM_S 0 ++#define PCIE_PFLR_FORCE_LINK 0x00008000 /* Force link */ ++#define PCIE_PFLR_LINK_STATE 0x003F0000 /* Link State */ ++#define PCIE_PFLR_LINK_STATE_S 16 ++#define PCIE_PFLR_LOW_POWER_ENTRY_CNT 0xFF000000 /* Low Power Entrance Count, only for EP */ ++#define PCIE_PFLR_LOW_POWER_ENTRY_CNT_S 24 ++ ++/* Ack Frequency Register */ ++#define PCIE_AFR(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x70C) ++#define PCIE_AFR_AF 0x000000FF /* Ack Frequency */ ++#define PCIE_AFR_AF_S 0 ++#define PCIE_AFR_FTS_NUM 0x0000FF00 /* The number of Fast Training Sequence from L0S to L0 */ ++#define PCIE_AFR_FTS_NUM_S 8 ++#define PCIE_AFR_COM_FTS_NUM 0x00FF0000 /* N_FTS; when common clock is used*/ ++#define PCIE_AFR_COM_FTS_NUM_S 16 ++#define PCIE_AFR_L0S_ENTRY_LATENCY 0x07000000 /* L0s Entrance Latency */ ++#define PCIE_AFR_L0S_ENTRY_LATENCY_S 24 ++#define PCIE_AFR_L1_ENTRY_LATENCY 0x38000000 /* L1 Entrance Latency */ ++#define PCIE_AFR_L1_ENTRY_LATENCY_S 27 ++#define PCIE_AFR_FTS_NUM_DEFAULT 32 ++#define PCIE_AFR_L0S_ENTRY_LATENCY_DEFAULT 7 ++#define PCIE_AFR_L1_ENTRY_LATENCY_DEFAULT 5 ++ ++/* Port Link Control Register */ ++#define PCIE_PLCR(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x710) ++#define PCIE_PLCR_OTHER_MSG_REQ 0x00000001 /* Other Message Request */ ++#define PCIE_PLCR_SCRAMBLE_DISABLE 0x00000002 /* Scramble Disable */ ++#define PCIE_PLCR_LOOPBACK_EN 0x00000004 /* Loopback Enable */ ++#define PCIE_PLCR_LTSSM_HOT_RST 0x00000008 /* Force LTSSM to the hot reset */ ++#define PCIE_PLCR_DLL_LINK_EN 0x00000020 /* Enable Link initialization */ ++#define PCIE_PLCR_FAST_LINK_SIM_EN 0x00000080 /* Sets all internal timers to fast mode for simulation purposes */ ++#define PCIE_PLCR_LINK_MODE 0x003F0000 /* Link Mode Enable Mask */ ++#define PCIE_PLCR_LINK_MODE_S 16 ++#define PCIE_PLCR_CORRUPTED_CRC_EN 0x02000000 /* Enabled Corrupt CRC */ ++ ++/* Lane Skew Register */ ++#define PCIE_LSR(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x714) ++#define PCIE_LSR_LANE_SKEW_NUM 0x00FFFFFF /* Insert Lane Skew for Transmit, not applicable */ ++#define PCIE_LSR_LANE_SKEW_NUM_S 0 ++#define PCIE_LSR_FC_DISABLE 0x01000000 /* Disable of Flow Control */ ++#define PCIE_LSR_ACKNAK_DISABLE 0x02000000 /* Disable of Ack/Nak */ ++#define PCIE_LSR_LANE_DESKEW_DISABLE 0x80000000 /* Disable of Lane-to-Lane Skew */ ++ ++/* Symbol Number Register */ ++#define PCIE_SNR(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x718) ++#define PCIE_SNR_TS 0x0000000F /* Number of TS Symbol */ ++#define PCIE_SNR_TS_S 0 ++#define PCIE_SNR_SKP 0x00000700 /* Number of SKP Symbol */ ++#define PCIE_SNR_SKP_S 8 ++#define PCIE_SNR_REPLAY_TIMER 0x0007C000 /* Timer Modifier for Replay Timer */ ++#define PCIE_SNR_REPLAY_TIMER_S 14 ++#define PCIE_SNR_ACKNAK_LATENCY_TIMER 0x00F80000 /* Timer Modifier for Ack/Nak Latency Timer */ ++#define PCIE_SNR_ACKNAK_LATENCY_TIMER_S 19 ++#define PCIE_SNR_FC_TIMER 0x1F000000 /* Timer Modifier for Flow Control Watchdog Timer */ ++#define PCIE_SNR_FC_TIMER_S 28 ++ ++/* Symbol Timer Register and Filter Mask Register 1 */ ++#define PCIE_STRFMR(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x71C) ++#define PCIE_STRFMR_SKP_INTERVAL 0x000007FF /* SKP lnterval Value */ ++#define PCIE_STRFMR_SKP_INTERVAL_S 0 ++#define PCIE_STRFMR_FC_WDT_DISABLE 0x00008000 /* Disable of FC Watchdog Timer */ ++#define PCIE_STRFMR_TLP_FUNC_MISMATCH_OK 0x00010000 /* Mask Function Mismatch Filtering for Incoming Requests */ ++#define PCIE_STRFMR_POISONED_TLP_OK 0x00020000 /* Mask Poisoned TLP Filtering */ ++#define PCIE_STRFMR_BAR_MATCH_OK 0x00040000 /* Mask BAR Match Filtering */ ++#define PCIE_STRFMR_TYPE1_CFG_REQ_OK 0x00080000 /* Mask Type 1 Configuration Request Filtering */ ++#define PCIE_STRFMR_LOCKED_REQ_OK 0x00100000 /* Mask Locked Request Filtering */ ++#define PCIE_STRFMR_CPL_TAG_ERR_RULES_OK 0x00200000 /* Mask Tag Error Rules for Received Completions */ ++#define PCIE_STRFMR_CPL_REQUESTOR_ID_MISMATCH_OK 0x00400000 /* Mask Requester ID Mismatch Error for Received Completions */ ++#define PCIE_STRFMR_CPL_FUNC_MISMATCH_OK 0x00800000 /* Mask Function Mismatch Error for Received Completions */ ++#define PCIE_STRFMR_CPL_TC_MISMATCH_OK 0x01000000 /* Mask Traffic Class Mismatch Error for Received Completions */ ++#define PCIE_STRFMR_CPL_ATTR_MISMATCH_OK 0x02000000 /* Mask Attribute Mismatch Error for Received Completions */ ++#define PCIE_STRFMR_CPL_LENGTH_MISMATCH_OK 0x04000000 /* Mask Length Mismatch Error for Received Completions */ ++#define PCIE_STRFMR_TLP_ECRC_ERR_OK 0x08000000 /* Mask ECRC Error Filtering */ ++#define PCIE_STRFMR_CPL_TLP_ECRC_OK 0x10000000 /* Mask ECRC Error Filtering for Completions */ ++#define PCIE_STRFMR_RX_TLP_MSG_NO_DROP 0x20000000 /* Send Message TLPs */ ++#define PCIE_STRFMR_RX_IO_TRANS_ENABLE 0x40000000 /* Mask Filtering of received I/O Requests */ ++#define PCIE_STRFMR_RX_CFG_TRANS_ENABLE 0x80000000 /* Mask Filtering of Received Configuration Requests */ ++ ++#define PCIE_DEF_SKP_INTERVAL 700 /* 1180 ~1538 , 125MHz * 2, 250MHz * 1 */ ++ ++/* Filter Masker Register 2 */ ++#define PCIE_FMR2(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x720) ++#define PCIE_FMR2_VENDOR_MSG0_PASSED_TO_TRGT1 0x00000001 /* Mask RADM Filtering and Error Handling Rules */ ++#define PCIE_FMR2_VENDOR_MSG1_PASSED_TO_TRGT1 0x00000002 /* Mask RADM Filtering and Error Handling Rules */ ++ ++/* Debug Register 0 */ ++#define PCIE_DBR0(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x728) ++ ++/* Debug Register 1 */ ++#define PCIE_DBR1(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x72C) ++ ++/* Transmit Posted FC Credit Status Register */ ++#define PCIE_TPFCS(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x730) ++#define PCIE_TPFCS_TX_P_DATA_FC_CREDITS 0x00000FFF /* Transmit Posted Data FC Credits */ ++#define PCIE_TPFCS_TX_P_DATA_FC_CREDITS_S 0 ++#define PCIE_TPFCS_TX_P_HDR_FC_CREDITS 0x000FF000 /* Transmit Posted Header FC Credits */ ++#define PCIE_TPFCS_TX_P_HDR_FC_CREDITS_S 12 ++ ++/* Transmit Non-Posted FC Credit Status */ ++#define PCIE_TNPFCS(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x734) ++#define PCIE_TNPFCS_TX_NP_DATA_FC_CREDITS 0x00000FFF /* Transmit Non-Posted Data FC Credits */ ++#define PCIE_TNPFCS_TX_NP_DATA_FC_CREDITS_S 0 ++#define PCIE_TNPFCS_TX_NP_HDR_FC_CREDITS 0x000FF000 /* Transmit Non-Posted Header FC Credits */ ++#define PCIE_TNPFCS_TX_NP_HDR_FC_CREDITS_S 12 ++ ++/* Transmit Complete FC Credit Status Register */ ++#define PCIE_TCFCS(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x738) ++#define PCIE_TCFCS_TX_CPL_DATA_FC_CREDITS 0x00000FFF /* Transmit Completion Data FC Credits */ ++#define PCIE_TCFCS_TX_CPL_DATA_FC_CREDITS_S 0 ++#define PCIE_TCFCS_TX_CPL_HDR_FC_CREDITS 0x000FF000 /* Transmit Completion Header FC Credits */ ++#define PCIE_TCFCS_TX_CPL_HDR_FC_CREDITS_S 12 ++ ++/* Queue Status Register */ ++#define PCIE_QSR(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x73C) ++#define PCIE_QSR_WAIT_UPDATE_FC_DLL 0x00000001 /* Received TLP FC Credits Not Returned */ ++#define PCIE_QSR_TX_RETRY_BUF_NOT_EMPTY 0x00000002 /* Transmit Retry Buffer Not Empty */ ++#define PCIE_QSR_RX_QUEUE_NOT_EMPTY 0x00000004 /* Received Queue Not Empty */ ++ ++/* VC Transmit Arbitration Register 1 */ ++#define PCIE_VCTAR1(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x740) ++#define PCIE_VCTAR1_WRR_WEIGHT_VC0 0x000000FF /* WRR Weight for VC0 */ ++#define PCIE_VCTAR1_WRR_WEIGHT_VC1 0x0000FF00 /* WRR Weight for VC1 */ ++#define PCIE_VCTAR1_WRR_WEIGHT_VC2 0x00FF0000 /* WRR Weight for VC2 */ ++#define PCIE_VCTAR1_WRR_WEIGHT_VC3 0xFF000000 /* WRR Weight for VC3 */ ++ ++/* VC Transmit Arbitration Register 2 */ ++#define PCIE_VCTAR2(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x744) ++#define PCIE_VCTAR2_WRR_WEIGHT_VC4 0x000000FF /* WRR Weight for VC4 */ ++#define PCIE_VCTAR2_WRR_WEIGHT_VC5 0x0000FF00 /* WRR Weight for VC5 */ ++#define PCIE_VCTAR2_WRR_WEIGHT_VC6 0x00FF0000 /* WRR Weight for VC6 */ ++#define PCIE_VCTAR2_WRR_WEIGHT_VC7 0xFF000000 /* WRR Weight for VC7 */ ++ ++/* VC0 Posted Receive Queue Control Register */ ++#define PCIE_VC0_PRQCR(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x748) ++#define PCIE_VC0_PRQCR_P_DATA_CREDITS 0x00000FFF /* VC0 Posted Data Credits */ ++#define PCIE_VC0_PRQCR_P_DATA_CREDITS_S 0 ++#define PCIE_VC0_PRQCR_P_HDR_CREDITS 0x000FF000 /* VC0 Posted Header Credits */ ++#define PCIE_VC0_PRQCR_P_HDR_CREDITS_S 12 ++#define PCIE_VC0_PRQCR_P_TLP_QUEUE_MODE 0x00E00000 /* VC0 Posted TLP Queue Mode */ ++#define PCIE_VC0_PRQCR_P_TLP_QUEUE_MODE_S 20 ++#define PCIE_VC0_PRQCR_TLP_RELAX_ORDER 0x40000000 /* TLP Type Ordering for VC0 */ ++#define PCIE_VC0_PRQCR_VC_STRICT_ORDER 0x80000000 /* VC0 Ordering for Receive Queues */ ++ ++/* VC0 Non-Posted Receive Queue Control */ ++#define PCIE_VC0_NPRQCR(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x74C) ++#define PCIE_VC0_NPRQCR_NP_DATA_CREDITS 0x00000FFF /* VC0 Non-Posted Data Credits */ ++#define PCIE_VC0_NPRQCR_NP_DATA_CREDITS_S 0 ++#define PCIE_VC0_NPRQCR_NP_HDR_CREDITS 0x000FF000 /* VC0 Non-Posted Header Credits */ ++#define PCIE_VC0_NPRQCR_NP_HDR_CREDITS_S 12 ++#define PCIE_VC0_NPRQCR_NP_TLP_QUEUE_MODE 0x00E00000 /* VC0 Non-Posted TLP Queue Mode */ ++#define PCIE_VC0_NPRQCR_NP_TLP_QUEUE_MODE_S 20 ++ ++/* VC0 Completion Receive Queue Control */ ++#define PCIE_VC0_CRQCR(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x750) ++#define PCIE_VC0_CRQCR_CPL_DATA_CREDITS 0x00000FFF /* VC0 Completion TLP Queue Mode */ ++#define PCIE_VC0_CRQCR_CPL_DATA_CREDITS_S 0 ++#define PCIE_VC0_CRQCR_CPL_HDR_CREDITS 0x000FF000 /* VC0 Completion Header Credits */ ++#define PCIE_VC0_CRQCR_CPL_HDR_CREDITS_S 12 ++#define PCIE_VC0_CRQCR_CPL_TLP_QUEUE_MODE 0x00E00000 /* VC0 Completion Data Credits */ ++#define PCIE_VC0_CRQCR_CPL_TLP_QUEUE_MODE_S 21 ++ ++/* Applicable to the above three registers */ ++enum { ++ PCIE_VC0_TLP_QUEUE_MODE_STORE_FORWARD = 1, ++ PCIE_VC0_TLP_QUEUE_MODE_CUT_THROUGH = 2, ++ PCIE_VC0_TLP_QUEUE_MODE_BYPASS = 4, ++}; ++ ++/* VC0 Posted Buffer Depth Register */ ++#define PCIE_VC0_PBD(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x7A8) ++#define PCIE_VC0_PBD_P_DATA_QUEUE_ENTRIES 0x00003FFF /* VC0 Posted Data Queue Depth */ ++#define PCIE_VC0_PBD_P_DATA_QUEUE_ENTRIES_S 0 ++#define PCIE_VC0_PBD_P_HDR_QUEUE_ENTRIES 0x03FF0000 /* VC0 Posted Header Queue Depth */ ++#define PCIE_VC0_PBD_P_HDR_QUEUE_ENTRIES_S 16 ++ ++/* VC0 Non-Posted Buffer Depth Register */ ++#define PCIE_VC0_NPBD(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x7AC) ++#define PCIE_VC0_NPBD_NP_DATA_QUEUE_ENTRIES 0x00003FFF /* VC0 Non-Posted Data Queue Depth */ ++#define PCIE_VC0_NPBD_NP_DATA_QUEUE_ENTRIES_S 0 ++#define PCIE_VC0_NPBD_NP_HDR_QUEUE_ENTRIES 0x03FF0000 /* VC0 Non-Posted Header Queue Depth */ ++#define PCIE_VC0_NPBD_NP_HDR_QUEUE_ENTRIES_S 16 ++ ++/* VC0 Completion Buffer Depth Register */ ++#define PCIE_VC0_CBD(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x7B0) ++#define PCIE_VC0_CBD_CPL_DATA_QUEUE_ENTRIES 0x00003FFF /* C0 Completion Data Queue Depth */ ++#define PCIE_VC0_CBD_CPL_DATA_QUEUE_ENTRIES_S 0 ++#define PCIE_VC0_CBD_CPL_HDR_QUEUE_ENTRIES 0x03FF0000 /* VC0 Completion Header Queue Depth */ ++#define PCIE_VC0_CBD_CPL_HDR_QUEUE_ENTRIES_S 16 ++ ++/* PHY Status Register, all zeros in VR9 */ ++#define PCIE_PHYSR(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x810) ++ ++/* PHY Control Register, all zeros in VR9 */ ++#define PCIE_PHYCR(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x814) ++ ++/* ++ * PCIe PDI PHY register definition, suppose all the following ++ * stuff is confidential. ++ * XXX, detailed bit definition ++ */ ++#define PCIE_PHY_PLL_CTRL1(X) (PCIE_PHY_PORT_TO_BASE(X) + (0x22 << 1)) ++#define PCIE_PHY_PLL_CTRL2(X) (PCIE_PHY_PORT_TO_BASE(X) + (0x23 << 1)) ++#define PCIE_PHY_PLL_CTRL3(X) (PCIE_PHY_PORT_TO_BASE(X) + (0x24 << 1)) ++#define PCIE_PHY_PLL_CTRL4(X) (PCIE_PHY_PORT_TO_BASE(X) + (0x25 << 1)) ++#define PCIE_PHY_PLL_CTRL5(X) (PCIE_PHY_PORT_TO_BASE(X) + (0x26 << 1)) ++#define PCIE_PHY_PLL_CTRL6(X) (PCIE_PHY_PORT_TO_BASE(X) + (0x27 << 1)) ++#define PCIE_PHY_PLL_CTRL7(X) (PCIE_PHY_PORT_TO_BASE(X) + (0x28 << 1)) ++#define PCIE_PHY_PLL_A_CTRL1(X) (PCIE_PHY_PORT_TO_BASE(X) + (0x29 << 1)) ++#define PCIE_PHY_PLL_A_CTRL2(X) (PCIE_PHY_PORT_TO_BASE(X) + (0x2A << 1)) ++#define PCIE_PHY_PLL_A_CTRL3(X) (PCIE_PHY_PORT_TO_BASE(X) + (0x2B << 1)) ++#define PCIE_PHY_PLL_STATUS(X) (PCIE_PHY_PORT_TO_BASE(X) + (0x2C << 1)) ++ ++#define PCIE_PHY_TX1_CTRL1(X) (PCIE_PHY_PORT_TO_BASE(X) + (0x30 << 1)) ++#define PCIE_PHY_TX1_CTRL2(X) (PCIE_PHY_PORT_TO_BASE(X) + (0x31 << 1)) ++#define PCIE_PHY_TX1_CTRL3(X) (PCIE_PHY_PORT_TO_BASE(X) + (0x32 << 1)) ++#define PCIE_PHY_TX1_A_CTRL1(X) (PCIE_PHY_PORT_TO_BASE(X) + (0x33 << 1)) ++#define PCIE_PHY_TX1_A_CTRL2(X) (PCIE_PHY_PORT_TO_BASE(X) + (0x34 << 1)) ++#define PCIE_PHY_TX1_MOD1(X) (PCIE_PHY_PORT_TO_BASE(X) + (0x35 << 1)) ++#define PCIE_PHY_TX1_MOD2(X) (PCIE_PHY_PORT_TO_BASE(X) + (0x36 << 1)) ++#define PCIE_PHY_TX1_MOD3(X) (PCIE_PHY_PORT_TO_BASE(X) + (0x37 << 1)) ++ ++#define PCIE_PHY_TX2_CTRL1(X) (PCIE_PHY_PORT_TO_BASE(X) + (0x38 << 1)) ++#define PCIE_PHY_TX2_CTRL2(X) (PCIE_PHY_PORT_TO_BASE(X) + (0x39 << 1)) ++#define PCIE_PHY_TX2_A_CTRL1(X) (PCIE_PHY_PORT_TO_BASE(X) + (0x3B << 1)) ++#define PCIE_PHY_TX2_A_CTRL2(X) (PCIE_PHY_PORT_TO_BASE(X) + (0x3C << 1)) ++#define PCIE_PHY_TX2_MOD1(X) (PCIE_PHY_PORT_TO_BASE(X) + (0x3D << 1)) ++#define PCIE_PHY_TX2_MOD2(X) (PCIE_PHY_PORT_TO_BASE(X) + (0x3E << 1)) ++#define PCIE_PHY_TX2_MOD3(X) (PCIE_PHY_PORT_TO_BASE(X) + (0x3F << 1)) ++ ++#define PCIE_PHY_RX1_CTRL1(X) (PCIE_PHY_PORT_TO_BASE(X) + (0x50 << 1)) ++#define PCIE_PHY_RX1_CTRL2(X) (PCIE_PHY_PORT_TO_BASE(X) + (0x51 << 1)) ++#define PCIE_PHY_RX1_CDR(X) (PCIE_PHY_PORT_TO_BASE(X) + (0x52 << 1)) ++#define PCIE_PHY_RX1_EI(X) (PCIE_PHY_PORT_TO_BASE(X) + (0x53 << 1)) ++#define PCIE_PHY_RX1_A_CTRL(X) (PCIE_PHY_PORT_TO_BASE(X) + (0x55 << 1)) ++ ++/* Interrupt related stuff */ ++#define PCIE_LEGACY_DISABLE 0 ++#define PCIE_LEGACY_INTA 1 ++#define PCIE_LEGACY_INTB 2 ++#define PCIE_LEGACY_INTC 3 ++#define PCIE_LEGACY_INTD 4 ++#define PCIE_LEGACY_INT_MAX PCIE_LEGACY_INTD ++ ++#endif /* IFXMIPS_PCIE_REG_H */ ++ +--- /dev/null ++++ b/arch/mips/pci/ifxmips_pcie_vr9.h +@@ -0,0 +1,269 @@ ++/**************************************************************************** ++ Copyright (c) 2010 ++ Lantiq Deutschland GmbH ++ Am Campeon 3; 85579 Neubiberg, Germany ++ ++ For licensing information, see the file 'LICENSE' in the root folder of ++ this software module. ++ ++ *****************************************************************************/ ++/*! ++ \file ifxmips_pcie_vr9.h ++ \ingroup IFX_PCIE ++ \brief PCIe RC driver vr9 specific file ++*/ ++ ++#ifndef IFXMIPS_PCIE_VR9_H ++#define IFXMIPS_PCIE_VR9_H ++ ++#include ++#include ++ ++#include ++#include ++ ++#define IFX_PCIE_GPIO_RESET 494 ++ ++#define IFX_REG_R32 ltq_r32 ++#define IFX_REG_W32 ltq_w32 ++#define CONFIG_IFX_PCIE_HW_SWAP ++#define IFX_RCU_AHB_ENDIAN ((volatile u32*)(IFX_RCU + 0x004C)) ++#define IFX_RCU_RST_REQ ((volatile u32*)(IFX_RCU + 0x0010)) ++#define IFX_RCU_AHB_BE_PCIE_PDI 0x00000080 /* Configure PCIE PDI module in big endian*/ ++ ++#define IFX_RCU (KSEG1 | 0x1F203000) ++#define IFX_RCU_AHB_BE_PCIE_M 0x00000001 /* Configure AHB master port that connects to PCIe RC in big endian */ ++#define IFX_RCU_AHB_BE_PCIE_S 0x00000010 /* Configure AHB slave port that connects to PCIe RC in little endian */ ++#define IFX_RCU_AHB_BE_XBAR_M 0x00000002 /* Configure AHB master port that connects to XBAR in big endian */ ++#define CONFIG_IFX_PCIE_PHY_36MHZ_MODE ++ ++#define IFX_PMU1_MODULE_PCIE_PHY (0) ++#define IFX_PMU1_MODULE_PCIE_CTRL (1) ++#define IFX_PMU1_MODULE_PDI (4) ++#define IFX_PMU1_MODULE_MSI (5) ++ ++#define IFX_PMU_MODULE_PCIE_L0_CLK (31) ++ ++ ++#define IFX_GPIO (KSEG1 | 0x1E100B00) ++#define ALT0 ((volatile u32*)(IFX_GPIO + 0x007c)) ++#define ALT1 ((volatile u32*)(IFX_GPIO + 0x0080)) ++#define OD ((volatile u32*)(IFX_GPIO + 0x0084)) ++#define DIR ((volatile u32*)(IFX_GPIO + 0x0078)) ++#define OUT ((volatile u32*)(IFX_GPIO + 0x0070)) ++ ++ ++static inline void pcie_ep_gpio_rst_init(int pcie_port) ++{ ++ ++ gpio_request(IFX_PCIE_GPIO_RESET, "pcie-reset"); ++ gpio_direction_output(IFX_PCIE_GPIO_RESET, 1); ++ gpio_set_value(IFX_PCIE_GPIO_RESET, 1); ++ ++/* ifx_gpio_pin_reserve(IFX_PCIE_GPIO_RESET, ifx_pcie_gpio_module_id); ++ ifx_gpio_output_set(IFX_PCIE_GPIO_RESET, ifx_pcie_gpio_module_id); ++ ifx_gpio_dir_out_set(IFX_PCIE_GPIO_RESET, ifx_pcie_gpio_module_id); ++ ifx_gpio_altsel0_clear(IFX_PCIE_GPIO_RESET, ifx_pcie_gpio_module_id); ++ ifx_gpio_altsel1_clear(IFX_PCIE_GPIO_RESET, ifx_pcie_gpio_module_id); ++ ifx_gpio_open_drain_set(IFX_PCIE_GPIO_RESET, ifx_pcie_gpio_module_id);*/ ++} ++ ++static inline void pcie_ahb_pmu_setup(void) ++{ ++ /* Enable AHB bus master/slave */ ++ struct clk *clk; ++ clk = clk_get_sys("1d900000.pcie", "ahb"); ++ clk_enable(clk); ++ ++ //AHBM_PMU_SETUP(IFX_PMU_ENABLE); ++ //AHBS_PMU_SETUP(IFX_PMU_ENABLE); ++} ++ ++static inline void pcie_rcu_endian_setup(int pcie_port) ++{ ++ u32 reg; ++ ++ reg = IFX_REG_R32(IFX_RCU_AHB_ENDIAN); ++#ifdef CONFIG_IFX_PCIE_HW_SWAP ++ reg |= IFX_RCU_AHB_BE_PCIE_M; ++ reg |= IFX_RCU_AHB_BE_PCIE_S; ++ reg &= ~IFX_RCU_AHB_BE_XBAR_M; ++#else ++ reg |= IFX_RCU_AHB_BE_PCIE_M; ++ reg &= ~IFX_RCU_AHB_BE_PCIE_S; ++ reg &= ~IFX_RCU_AHB_BE_XBAR_M; ++#endif /* CONFIG_IFX_PCIE_HW_SWAP */ ++ IFX_REG_W32(reg, IFX_RCU_AHB_ENDIAN); ++ IFX_PCIE_PRINT(PCIE_MSG_REG, "%s IFX_RCU_AHB_ENDIAN: 0x%08x\n", __func__, IFX_REG_R32(IFX_RCU_AHB_ENDIAN)); ++} ++ ++static inline void pcie_phy_pmu_enable(int pcie_port) ++{ ++ struct clk *clk; ++ clk = clk_get_sys("1d900000.pcie", "phy"); ++ clk_enable(clk); ++ ++ //PCIE_PHY_PMU_SETUP(IFX_PMU_ENABLE); ++} ++ ++static inline void pcie_phy_pmu_disable(int pcie_port) ++{ ++ struct clk *clk; ++ clk = clk_get_sys("1d900000.pcie", "phy"); ++ clk_disable(clk); ++ ++// PCIE_PHY_PMU_SETUP(IFX_PMU_DISABLE); ++} ++ ++static inline void pcie_pdi_big_endian(int pcie_port) ++{ ++ u32 reg; ++ ++ /* SRAM2PDI endianness control. */ ++ reg = IFX_REG_R32(IFX_RCU_AHB_ENDIAN); ++ /* Config AHB->PCIe and PDI endianness */ ++ reg |= IFX_RCU_AHB_BE_PCIE_PDI; ++ IFX_REG_W32(reg, IFX_RCU_AHB_ENDIAN); ++} ++ ++static inline void pcie_pdi_pmu_enable(int pcie_port) ++{ ++ /* Enable PDI to access PCIe PHY register */ ++ struct clk *clk; ++ clk = clk_get_sys("1d900000.pcie", "pdi"); ++ clk_enable(clk); ++ //PDI_PMU_SETUP(IFX_PMU_ENABLE); ++} ++ ++static inline void pcie_core_rst_assert(int pcie_port) ++{ ++ u32 reg; ++ ++ reg = IFX_REG_R32(IFX_RCU_RST_REQ); ++ ++ /* Reset PCIe PHY & Core, bit 22, bit 26 may be affected if write it directly */ ++ reg |= 0x00400000; ++ IFX_REG_W32(reg, IFX_RCU_RST_REQ); ++} ++ ++static inline void pcie_core_rst_deassert(int pcie_port) ++{ ++ u32 reg; ++ ++ /* Make sure one micro-second delay */ ++ udelay(1); ++ ++ /* Reset PCIe PHY & Core, bit 22 */ ++ reg = IFX_REG_R32(IFX_RCU_RST_REQ); ++ reg &= ~0x00400000; ++ IFX_REG_W32(reg, IFX_RCU_RST_REQ); ++} ++ ++static inline void pcie_phy_rst_assert(int pcie_port) ++{ ++ u32 reg; ++ ++ reg = IFX_REG_R32(IFX_RCU_RST_REQ); ++ reg |= 0x00001000; /* Bit 12 */ ++ IFX_REG_W32(reg, IFX_RCU_RST_REQ); ++} ++ ++static inline void pcie_phy_rst_deassert(int pcie_port) ++{ ++ u32 reg; ++ ++ /* Make sure one micro-second delay */ ++ udelay(1); ++ ++ reg = IFX_REG_R32(IFX_RCU_RST_REQ); ++ reg &= ~0x00001000; /* Bit 12 */ ++ IFX_REG_W32(reg, IFX_RCU_RST_REQ); ++} ++ ++static inline void pcie_device_rst_assert(int pcie_port) ++{ ++ gpio_set_value(IFX_PCIE_GPIO_RESET, 0); ++// ifx_gpio_output_clear(IFX_PCIE_GPIO_RESET, ifx_pcie_gpio_module_id); ++} ++ ++static inline void pcie_device_rst_deassert(int pcie_port) ++{ ++ mdelay(100); ++ gpio_direction_output(IFX_PCIE_GPIO_RESET, 1); ++// gpio_set_value(IFX_PCIE_GPIO_RESET, 1); ++ //ifx_gpio_output_set(IFX_PCIE_GPIO_RESET, ifx_pcie_gpio_module_id); ++} ++ ++static inline void pcie_core_pmu_setup(int pcie_port) ++{ ++ struct clk *clk; ++ clk = clk_get_sys("1d900000.pcie", "ctl"); ++ clk_enable(clk); ++ clk = clk_get_sys("1d900000.pcie", "bus"); ++ clk_enable(clk); ++ ++ /* PCIe Core controller enabled */ ++// PCIE_CTRL_PMU_SETUP(IFX_PMU_ENABLE); ++ ++ /* Enable PCIe L0 Clock */ ++// PCIE_L0_CLK_PMU_SETUP(IFX_PMU_ENABLE); ++} ++ ++static inline void pcie_msi_init(int pcie_port) ++{ ++ struct clk *clk; ++ pcie_msi_pic_init(pcie_port); ++ clk = clk_get_sys("ltq_pcie", "msi"); ++ clk_enable(clk); ++// MSI_PMU_SETUP(IFX_PMU_ENABLE); ++} ++ ++static inline u32 ++ifx_pcie_bus_nr_deduct(u32 bus_number, int pcie_port) ++{ ++ u32 tbus_number = bus_number; ++ ++#ifdef CONFIG_PCI_LANTIQ ++ if (pcibios_host_nr() > 1) { ++ tbus_number -= pcibios_1st_host_bus_nr(); ++ } ++#endif /* CONFIG_PCI_LANTIQ */ ++ return tbus_number; ++} ++ ++static inline u32 ++ifx_pcie_bus_enum_hack(struct pci_bus *bus, u32 devfn, int where, u32 value, int pcie_port, int read) ++{ ++ struct pci_dev *pdev; ++ u32 tvalue = value; ++ ++ /* Sanity check */ ++ pdev = pci_get_slot(bus, devfn); ++ if (pdev == NULL) { ++ return tvalue; ++ } ++ ++ /* Only care about PCI bridge */ ++ if (pdev->hdr_type != PCI_HEADER_TYPE_BRIDGE) { ++ return tvalue; ++ } ++ ++ if (read) { /* Read hack */ ++ #ifdef CONFIG_PCI_LANTIQ ++ if (pcibios_host_nr() > 1) { ++ tvalue = ifx_pcie_bus_enum_read_hack(where, tvalue); ++ } ++ #endif /* CONFIG_PCI_LANTIQ */ ++ } ++ else { /* Write hack */ ++ #ifdef CONFIG_PCI_LANTIQ ++ if (pcibios_host_nr() > 1) { ++ tvalue = ifx_pcie_bus_enum_write_hack(where, tvalue); ++ } ++ #endif ++ } ++ return tvalue; ++} ++ ++#endif /* IFXMIPS_PCIE_VR9_H */ ++ +--- a/arch/mips/pci/pci.c ++++ b/arch/mips/pci/pci.c +@@ -256,6 +256,31 @@ static int __init pcibios_init(void) + + subsys_initcall(pcibios_init); + ++int pcibios_host_nr(void) ++{ ++ int count; ++ struct pci_controller *hose; ++ for (count = 0, hose = hose_head; hose; hose = hose->next, count++) { ++ ; ++ } ++ return count; ++} ++EXPORT_SYMBOL(pcibios_host_nr); ++ ++int pcibios_1st_host_bus_nr(void) ++{ ++ int bus_nr = 0; ++ struct pci_controller *hose = hose_head; ++ ++ if (hose != NULL) { ++ if (hose->bus != NULL) { ++ bus_nr = hose->bus->number + 1; ++ } ++ } ++ return bus_nr; ++} ++EXPORT_SYMBOL(pcibios_1st_host_bus_nr); ++ + static int pcibios_enable_resources(struct pci_dev *dev, int mask) + { + u16 cmd, old_cmd; +--- /dev/null ++++ b/arch/mips/pci/pcie-lantiq.h +@@ -0,0 +1,1305 @@ ++/****************************************************************************** ++** ++** FILE NAME : ifxmips_pcie_reg.h ++** PROJECT : IFX UEIP for VRX200 ++** MODULES : PCIe module ++** ++** DATE : 02 Mar 2009 ++** AUTHOR : Lei Chuanhua ++** DESCRIPTION : PCIe Root Complex Driver ++** COPYRIGHT : Copyright (c) 2009 ++** Infineon Technologies AG ++** Am Campeon 1-12, 85579 Neubiberg, Germany ++** ++** This program is free software; you can redistribute it and/or modify ++** it under the terms of the GNU General Public License as published by ++** the Free Software Foundation; either version 2 of the License, or ++** (at your option) any later version. ++** HISTORY ++** $Version $Date $Author $Comment ++** 0.0.1 17 Mar,2009 Lei Chuanhua Initial version ++*******************************************************************************/ ++#ifndef IFXMIPS_PCIE_REG_H ++#define IFXMIPS_PCIE_REG_H ++#include ++#include ++#include ++#include ++/*! ++ \file ifxmips_pcie_reg.h ++ \ingroup IFX_PCIE ++ \brief header file for PCIe module register definition ++*/ ++/* PCIe Address Mapping Base */ ++#define PCIE_CFG_PHY_BASE 0x1D000000UL ++#define PCIE_CFG_BASE (KSEG1 + PCIE_CFG_PHY_BASE) ++#define PCIE_CFG_SIZE (8 * 1024 * 1024) ++ ++#define PCIE_MEM_PHY_BASE 0x1C000000UL ++#define PCIE_MEM_BASE (KSEG1 + PCIE_MEM_PHY_BASE) ++#define PCIE_MEM_SIZE (16 * 1024 * 1024) ++#define PCIE_MEM_PHY_END (PCIE_MEM_PHY_BASE + PCIE_MEM_SIZE - 1) ++ ++#define PCIE_IO_PHY_BASE 0x1D800000UL ++#define PCIE_IO_BASE (KSEG1 + PCIE_IO_PHY_BASE) ++#define PCIE_IO_SIZE (1 * 1024 * 1024) ++#define PCIE_IO_PHY_END (PCIE_IO_PHY_BASE + PCIE_IO_SIZE - 1) ++ ++#define PCIE_RC_CFG_BASE (KSEG1 + 0x1D900000) ++#define PCIE_APP_LOGIC_REG (KSEG1 + 0x1E100900) ++#define PCIE_MSI_PHY_BASE 0x1F600000UL ++ ++#define PCIE_PDI_PHY_BASE 0x1F106800UL ++#define PCIE_PDI_BASE (KSEG1 + PCIE_PDI_PHY_BASE) ++#define PCIE_PDI_SIZE 0x400 ++ ++#define PCIE1_CFG_PHY_BASE 0x19000000UL ++#define PCIE1_CFG_BASE (KSEG1 + PCIE1_CFG_PHY_BASE) ++#define PCIE1_CFG_SIZE (8 * 1024 * 1024) ++ ++#define PCIE1_MEM_PHY_BASE 0x18000000UL ++#define PCIE1_MEM_BASE (KSEG1 + PCIE1_MEM_PHY_BASE) ++#define PCIE1_MEM_SIZE (16 * 1024 * 1024) ++#define PCIE1_MEM_PHY_END (PCIE1_MEM_PHY_BASE + PCIE1_MEM_SIZE - 1) ++ ++#define PCIE1_IO_PHY_BASE 0x19800000UL ++#define PCIE1_IO_BASE (KSEG1 + PCIE1_IO_PHY_BASE) ++#define PCIE1_IO_SIZE (1 * 1024 * 1024) ++#define PCIE1_IO_PHY_END (PCIE1_IO_PHY_BASE + PCIE1_IO_SIZE - 1) ++ ++#define PCIE1_RC_CFG_BASE (KSEG1 + 0x19900000) ++#define PCIE1_APP_LOGIC_REG (KSEG1 + 0x1E100700) ++#define PCIE1_MSI_PHY_BASE 0x1F400000UL ++ ++#define PCIE1_PDI_PHY_BASE 0x1F700400UL ++#define PCIE1_PDI_BASE (KSEG1 + PCIE1_PDI_PHY_BASE) ++#define PCIE1_PDI_SIZE 0x400 ++ ++#define PCIE_CFG_PORT_TO_BASE(X) ((X) > 0 ? (PCIE1_CFG_BASE) : (PCIE_CFG_BASE)) ++#define PCIE_MEM_PORT_TO_BASE(X) ((X) > 0 ? (PCIE1_MEM_BASE) : (PCIE_MEM_BASE)) ++#define PCIE_IO_PORT_TO_BASE(X) ((X) > 0 ? (PCIE1_IO_BASE) : (PCIE_IO_BASE)) ++#define PCIE_MEM_PHY_PORT_TO_BASE(X) ((X) > 0 ? (PCIE1_MEM_PHY_BASE) : (PCIE_MEM_PHY_BASE)) ++#define PCIE_MEM_PHY_PORT_TO_END(X) ((X) > 0 ? (PCIE1_MEM_PHY_END) : (PCIE_MEM_PHY_END)) ++#define PCIE_IO_PHY_PORT_TO_BASE(X) ((X) > 0 ? (PCIE1_IO_PHY_BASE) : (PCIE_IO_PHY_BASE)) ++#define PCIE_IO_PHY_PORT_TO_END(X) ((X) > 0 ? (PCIE1_IO_PHY_END) : (PCIE_IO_PHY_END)) ++#define PCIE_APP_PORT_TO_BASE(X) ((X) > 0 ? (PCIE1_APP_LOGIC_REG) : (PCIE_APP_LOGIC_REG)) ++#define PCIE_RC_PORT_TO_BASE(X) ((X) > 0 ? (PCIE1_RC_CFG_BASE) : (PCIE_RC_CFG_BASE)) ++#define PCIE_PHY_PORT_TO_BASE(X) ((X) > 0 ? (PCIE1_PDI_BASE) : (PCIE_PDI_BASE)) ++ ++/* PCIe Application Logic Register */ ++/* RC Core Control Register */ ++#define PCIE_RC_CCR(X) (volatile u32*)(PCIE_APP_PORT_TO_BASE(X) + 0x10) ++/* This should be enabled after initializing configuratin registers ++ * Also should check link status retraining bit ++ */ ++#define PCIE_RC_CCR_LTSSM_ENABLE 0x00000001 /* Enable LTSSM to continue link establishment */ ++ ++/* RC Core Debug Register */ ++#define PCIE_RC_DR(X) (volatile u32*)(PCIE_APP_PORT_TO_BASE(X) + 0x14) ++#define PCIE_RC_DR_DLL_UP 0x00000001 /* Data Link Layer Up */ ++#define PCIE_RC_DR_CURRENT_POWER_STATE 0x0000000E /* Current Power State */ ++#define PCIE_RC_DR_CURRENT_POWER_STATE_S 1 ++#define PCIE_RC_DR_CURRENT_LTSSM_STATE 0x000001F0 /* Current LTSSM State */ ++#define PCIE_RC_DR_CURRENT_LTSSM_STATE_S 4 ++ ++#define PCIE_RC_DR_PM_DEV_STATE 0x00000E00 /* Power Management D-State */ ++#define PCIE_RC_DR_PM_DEV_STATE_S 9 ++ ++#define PCIE_RC_DR_PM_ENABLED 0x00001000 /* Power Management State from PMU */ ++#define PCIE_RC_DR_PME_EVENT_ENABLED 0x00002000 /* Power Management Event Enable State */ ++#define PCIE_RC_DR_AUX_POWER_ENABLED 0x00004000 /* Auxiliary Power Enable */ ++ ++/* Current Power State Definition */ ++enum { ++ PCIE_RC_DR_D0 = 0, ++ PCIE_RC_DR_D1, /* Not supported */ ++ PCIE_RC_DR_D2, /* Not supported */ ++ PCIE_RC_DR_D3, ++ PCIE_RC_DR_UN, ++}; ++ ++/* PHY Link Status Register */ ++#define PCIE_PHY_SR(X) (volatile u32*)(PCIE_APP_PORT_TO_BASE(X) + 0x18) ++#define PCIE_PHY_SR_PHY_LINK_UP 0x00000001 /* PHY Link Up/Down Indicator */ ++ ++/* Electromechanical Control Register */ ++#define PCIE_EM_CR(X) (volatile u32*)(PCIE_APP_PORT_TO_BASE(X) + 0x1C) ++#define PCIE_EM_CR_CARD_IS_PRESENT 0x00000001 /* Card Presence Detect State */ ++#define PCIE_EM_CR_MRL_OPEN 0x00000002 /* MRL Sensor State */ ++#define PCIE_EM_CR_POWER_FAULT_SET 0x00000004 /* Power Fault Detected */ ++#define PCIE_EM_CR_MRL_SENSOR_SET 0x00000008 /* MRL Sensor Changed */ ++#define PCIE_EM_CR_PRESENT_DETECT_SET 0x00000010 /* Card Presense Detect Changed */ ++#define PCIE_EM_CR_CMD_CPL_INT_SET 0x00000020 /* Command Complete Interrupt */ ++#define PCIE_EM_CR_SYS_INTERLOCK_SET 0x00000040 /* System Electromechanical IterLock Engaged */ ++#define PCIE_EM_CR_ATTENTION_BUTTON_SET 0x00000080 /* Attention Button Pressed */ ++ ++/* Interrupt Status Register */ ++#define PCIE_IR_SR(X) (volatile u32*)(PCIE_APP_PORT_TO_BASE(X) + 0x20) ++#define PCIE_IR_SR_PME_CAUSE_MSI 0x00000002 /* MSI caused by PME */ ++#define PCIE_IR_SR_HP_PME_WAKE_GEN 0x00000004 /* Hotplug PME Wake Generation */ ++#define PCIE_IR_SR_HP_MSI 0x00000008 /* Hotplug MSI */ ++#define PCIE_IR_SR_AHB_LU_ERR 0x00000030 /* AHB Bridge Lookup Error Signals */ ++#define PCIE_IR_SR_AHB_LU_ERR_S 4 ++#define PCIE_IR_SR_INT_MSG_NUM 0x00003E00 /* Interrupt Message Number */ ++#define PCIE_IR_SR_INT_MSG_NUM_S 9 ++#define PCIE_IR_SR_AER_INT_MSG_NUM 0xF8000000 /* Advanced Error Interrupt Message Number */ ++#define PCIE_IR_SR_AER_INT_MSG_NUM_S 27 ++ ++/* Message Control Register */ ++#define PCIE_MSG_CR(X) (volatile u32*)(PCIE_APP_PORT_TO_BASE(X) + 0x30) ++#define PCIE_MSG_CR_GEN_PME_TURN_OFF_MSG 0x00000001 /* Generate PME Turn Off Message */ ++#define PCIE_MSG_CR_GEN_UNLOCK_MSG 0x00000002 /* Generate Unlock Message */ ++ ++#define PCIE_VDM_DR(X) (volatile u32*)(PCIE_APP_PORT_TO_BASE(X) + 0x34) ++ ++/* Vendor-Defined Message Requester ID Register */ ++#define PCIE_VDM_RID(X) (PCIE_APP_PORT_TO_BASE (X) + 0x38) ++#define PCIE_VDM_RID_VENROR_MSG_REQ_ID 0x0000FFFF ++#define PCIE_VDM_RID_VDMRID_S 0 ++ ++/* ASPM Control Register */ ++#define PCIE_ASPM_CR(X) (volatile u32*)(PCIE_APP_PORT_TO_BASE(X) + 0x40) ++#define PCIE_ASPM_CR_HOT_RST 0x00000001 /* Hot Reset Request to the downstream device */ ++#define PCIE_ASPM_CR_REQ_EXIT_L1 0x00000002 /* Request to Exit L1 */ ++#define PCIE_ASPM_CR_REQ_ENTER_L1 0x00000004 /* Request to Enter L1 */ ++ ++/* Vendor Message DW0 Register */ ++#define PCIE_VM_MSG_DW0(X) (volatile u32*)(PCIE_APP_PORT_TO_BASE(X) + 0x50) ++#define PCIE_VM_MSG_DW0_TYPE 0x0000001F /* Message type */ ++#define PCIE_VM_MSG_DW0_TYPE_S 0 ++#define PCIE_VM_MSG_DW0_FORMAT 0x00000060 /* Format */ ++#define PCIE_VM_MSG_DW0_FORMAT_S 5 ++#define PCIE_VM_MSG_DW0_TC 0x00007000 /* Traffic Class */ ++#define PCIE_VM_MSG_DW0_TC_S 12 ++#define PCIE_VM_MSG_DW0_ATTR 0x000C0000 /* Atrributes */ ++#define PCIE_VM_MSG_DW0_ATTR_S 18 ++#define PCIE_VM_MSG_DW0_EP_TLP 0x00100000 /* Poisoned TLP */ ++#define PCIE_VM_MSG_DW0_TD 0x00200000 /* TLP Digest */ ++#define PCIE_VM_MSG_DW0_LEN 0xFFC00000 /* Length */ ++#define PCIE_VM_MSG_DW0_LEN_S 22 ++ ++/* Format Definition */ ++enum { ++ PCIE_VM_MSG_FORMAT_00 = 0, /* 3DW Hdr, no data*/ ++ PCIE_VM_MSG_FORMAT_01, /* 4DW Hdr, no data */ ++ PCIE_VM_MSG_FORMAT_10, /* 3DW Hdr, with data */ ++ PCIE_VM_MSG_FORMAT_11, /* 4DW Hdr, with data */ ++}; ++ ++/* Traffic Class Definition */ ++enum { ++ PCIE_VM_MSG_TC0 = 0, ++ PCIE_VM_MSG_TC1, ++ PCIE_VM_MSG_TC2, ++ PCIE_VM_MSG_TC3, ++ PCIE_VM_MSG_TC4, ++ PCIE_VM_MSG_TC5, ++ PCIE_VM_MSG_TC6, ++ PCIE_VM_MSG_TC7, ++}; ++ ++/* Attributes Definition */ ++enum { ++ PCIE_VM_MSG_ATTR_00 = 0, /* RO and No Snoop cleared */ ++ PCIE_VM_MSG_ATTR_01, /* RO cleared , No Snoop set */ ++ PCIE_VM_MSG_ATTR_10, /* RO set, No Snoop cleared*/ ++ PCIE_VM_MSG_ATTR_11, /* RO and No Snoop set */ ++}; ++ ++/* Payload Size Definition */ ++#define PCIE_VM_MSG_LEN_MIN 0 ++#define PCIE_VM_MSG_LEN_MAX 1024 ++ ++/* Vendor Message DW1 Register */ ++#define PCIE_VM_MSG_DW1(X) (volatile u32*)(PCIE_APP_PORT_TO_BASE(X) + 0x54) ++#define PCIE_VM_MSG_DW1_FUNC_NUM 0x00000070 /* Function Number */ ++#define PCIE_VM_MSG_DW1_FUNC_NUM_S 8 ++#define PCIE_VM_MSG_DW1_CODE 0x00FF0000 /* Message Code */ ++#define PCIE_VM_MSG_DW1_CODE_S 16 ++#define PCIE_VM_MSG_DW1_TAG 0xFF000000 /* Tag */ ++#define PCIE_VM_MSG_DW1_TAG_S 24 ++ ++#define PCIE_VM_MSG_DW2(X) (volatile u32*)(PCIE_APP_PORT_TO_BASE(X) + 0x58) ++#define PCIE_VM_MSG_DW3(X) (volatile u32*)(PCIE_APP_PORT_TO_BASE(X) + 0x5C) ++ ++/* Vendor Message Request Register */ ++#define PCIE_VM_MSG_REQR(X) (volatile u32*)(PCIE_APP_PORT_TO_BASE(X) + 0x60) ++#define PCIE_VM_MSG_REQR_REQ 0x00000001 /* Vendor Message Request */ ++ ++ ++/* AHB Slave Side Band Control Register */ ++#define PCIE_AHB_SSB(X) (volatile u32*)(PCIE_APP_PORT_TO_BASE(X) + 0x70) ++#define PCIE_AHB_SSB_REQ_BCM 0x00000001 /* Slave Reques BCM filed */ ++#define PCIE_AHB_SSB_REQ_EP 0x00000002 /* Slave Reques EP filed */ ++#define PCIE_AHB_SSB_REQ_TD 0x00000004 /* Slave Reques TD filed */ ++#define PCIE_AHB_SSB_REQ_ATTR 0x00000018 /* Slave Reques Attribute number */ ++#define PCIE_AHB_SSB_REQ_ATTR_S 3 ++#define PCIE_AHB_SSB_REQ_TC 0x000000E0 /* Slave Request TC Field */ ++#define PCIE_AHB_SSB_REQ_TC_S 5 ++ ++/* AHB Master SideBand Ctrl Register */ ++#define PCIE_AHB_MSB(X) (volatile u32*)(PCIE_APP_PORT_TO_BASE(X) + 0x74) ++#define PCIE_AHB_MSB_RESP_ATTR 0x00000003 /* Master Response Attribute number */ ++#define PCIE_AHB_MSB_RESP_ATTR_S 0 ++#define PCIE_AHB_MSB_RESP_BAD_EOT 0x00000004 /* Master Response Badeot filed */ ++#define PCIE_AHB_MSB_RESP_BCM 0x00000008 /* Master Response BCM filed */ ++#define PCIE_AHB_MSB_RESP_EP 0x00000010 /* Master Response EP filed */ ++#define PCIE_AHB_MSB_RESP_TD 0x00000020 /* Master Response TD filed */ ++#define PCIE_AHB_MSB_RESP_FUN_NUM 0x000003C0 /* Master Response Function number */ ++#define PCIE_AHB_MSB_RESP_FUN_NUM_S 6 ++ ++/* AHB Control Register, fixed bus enumeration exception */ ++#define PCIE_AHB_CTRL(X) (volatile u32*)(PCIE_APP_PORT_TO_BASE(X) + 0x78) ++#define PCIE_AHB_CTRL_BUS_ERROR_SUPPRESS 0x00000001 ++ ++/* Interrupt Enalbe Register */ ++#define PCIE_IRNEN(X) (volatile u32*)(PCIE_APP_PORT_TO_BASE(X) + 0xF4) ++#define PCIE_IRNCR(X) (volatile u32*)(PCIE_APP_PORT_TO_BASE(X) + 0xF8) ++#define PCIE_IRNICR(X) (volatile u32*)(PCIE_APP_PORT_TO_BASE(X) + 0xFC) ++ ++/* PCIe interrupt enable/control/capture register definition */ ++#define PCIE_IRN_AER_REPORT 0x00000001 /* AER Interrupt */ ++#define PCIE_IRN_AER_MSIX 0x00000002 /* Advanced Error MSI-X Interrupt */ ++#define PCIE_IRN_PME 0x00000004 /* PME Interrupt */ ++#define PCIE_IRN_HOTPLUG 0x00000008 /* Hotplug Interrupt */ ++#define PCIE_IRN_RX_VDM_MSG 0x00000010 /* Vendor-Defined Message Interrupt */ ++#define PCIE_IRN_RX_CORRECTABLE_ERR_MSG 0x00000020 /* Correctable Error Message Interrupt */ ++#define PCIE_IRN_RX_NON_FATAL_ERR_MSG 0x00000040 /* Non-fatal Error Message */ ++#define PCIE_IRN_RX_FATAL_ERR_MSG 0x00000080 /* Fatal Error Message */ ++#define PCIE_IRN_RX_PME_MSG 0x00000100 /* PME Message Interrupt */ ++#define PCIE_IRN_RX_PME_TURNOFF_ACK 0x00000200 /* PME Turnoff Ack Message Interrupt */ ++#define PCIE_IRN_AHB_BR_FATAL_ERR 0x00000400 /* AHB Fatal Error Interrupt */ ++#define PCIE_IRN_LINK_AUTO_BW_STATUS 0x00000800 /* Link Auto Bandwidth Status Interrupt */ ++#define PCIE_IRN_BW_MGT 0x00001000 /* Bandwidth Managment Interrupt */ ++#define PCIE_IRN_INTA 0x00002000 /* INTA */ ++#define PCIE_IRN_INTB 0x00004000 /* INTB */ ++#define PCIE_IRN_INTC 0x00008000 /* INTC */ ++#define PCIE_IRN_INTD 0x00010000 /* INTD */ ++#define PCIE_IRN_WAKEUP 0x00020000 /* Wake up Interrupt */ ++ ++#define PCIE_RC_CORE_COMBINED_INT (PCIE_IRN_AER_REPORT | PCIE_IRN_AER_MSIX | PCIE_IRN_PME | \ ++ PCIE_IRN_HOTPLUG | PCIE_IRN_RX_VDM_MSG | PCIE_IRN_RX_CORRECTABLE_ERR_MSG |\ ++ PCIE_IRN_RX_NON_FATAL_ERR_MSG | PCIE_IRN_RX_FATAL_ERR_MSG | \ ++ PCIE_IRN_RX_PME_MSG | PCIE_IRN_RX_PME_TURNOFF_ACK | PCIE_IRN_AHB_BR_FATAL_ERR | \ ++ PCIE_IRN_LINK_AUTO_BW_STATUS | PCIE_IRN_BW_MGT) ++/* PCIe RC Configuration Register */ ++#define PCIE_VDID(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x00) ++ ++/* Bit definition from pci_reg.h */ ++#define PCIE_PCICMDSTS(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x04) ++#define PCIE_CCRID(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x08) ++#define PCIE_CLSLTHTBR(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x0C) /* EP only */ ++/* BAR0, BAR1,Only necessary if the bridges implements a device-specific register set or memory buffer */ ++#define PCIE_BAR0(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x10) /* Not used*/ ++#define PCIE_BAR1(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x14) /* Not used */ ++ ++#define PCIE_BNR(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x18) /* Mandatory */ ++/* Bus Number Register bits */ ++#define PCIE_BNR_PRIMARY_BUS_NUM 0x000000FF ++#define PCIE_BNR_PRIMARY_BUS_NUM_S 0 ++#define PCIE_PNR_SECONDARY_BUS_NUM 0x0000FF00 ++#define PCIE_PNR_SECONDARY_BUS_NUM_S 8 ++#define PCIE_PNR_SUB_BUS_NUM 0x00FF0000 ++#define PCIE_PNR_SUB_BUS_NUM_S 16 ++ ++/* IO Base/Limit Register bits */ ++#define PCIE_IOBLSECS(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x1C) /* RC only */ ++#define PCIE_IOBLSECS_32BIT_IO_ADDR 0x00000001 ++#define PCIE_IOBLSECS_IO_BASE_ADDR 0x000000F0 ++#define PCIE_IOBLSECS_IO_BASE_ADDR_S 4 ++#define PCIE_IOBLSECS_32BIT_IOLIMT 0x00000100 ++#define PCIE_IOBLSECS_IO_LIMIT_ADDR 0x0000F000 ++#define PCIE_IOBLSECS_IO_LIMIT_ADDR_S 12 ++ ++/* Non-prefetchable Memory Base/Limit Register bit */ ++#define PCIE_MBML(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x20) /* RC only */ ++#define PCIE_MBML_MEM_BASE_ADDR 0x0000FFF0 ++#define PCIE_MBML_MEM_BASE_ADDR_S 4 ++#define PCIE_MBML_MEM_LIMIT_ADDR 0xFFF00000 ++#define PCIE_MBML_MEM_LIMIT_ADDR_S 20 ++ ++/* Prefetchable Memory Base/Limit Register bit */ ++#define PCIE_PMBL(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x24) /* RC only */ ++#define PCIE_PMBL_64BIT_ADDR 0x00000001 ++#define PCIE_PMBL_UPPER_12BIT 0x0000FFF0 ++#define PCIE_PMBL_UPPER_12BIT_S 4 ++#define PCIE_PMBL_E64MA 0x00010000 ++#define PCIE_PMBL_END_ADDR 0xFFF00000 ++#define PCIE_PMBL_END_ADDR_S 20 ++#define PCIE_PMBU32(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x28) /* RC only */ ++#define PCIE_PMLU32(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x2C) /* RC only */ ++ ++/* I/O Base/Limit Upper 16 bits register */ ++#define PCIE_IO_BANDL(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x30) /* RC only */ ++#define PCIE_IO_BANDL_UPPER_16BIT_IO_BASE 0x0000FFFF ++#define PCIE_IO_BANDL_UPPER_16BIT_IO_BASE_S 0 ++#define PCIE_IO_BANDL_UPPER_16BIT_IO_LIMIT 0xFFFF0000 ++#define PCIE_IO_BANDL_UPPER_16BIT_IO_LIMIT_S 16 ++ ++#define PCIE_CPR(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x34) ++#define PCIE_EBBAR(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x38) ++ ++/* Interrupt and Secondary Bridge Control Register */ ++#define PCIE_INTRBCTRL(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x3C) ++ ++#define PCIE_INTRBCTRL_INT_LINE 0x000000FF ++#define PCIE_INTRBCTRL_INT_LINE_S 0 ++#define PCIE_INTRBCTRL_INT_PIN 0x0000FF00 ++#define PCIE_INTRBCTRL_INT_PIN_S 8 ++#define PCIE_INTRBCTRL_PARITY_ERR_RESP_ENABLE 0x00010000 /* #PERR */ ++#define PCIE_INTRBCTRL_SERR_ENABLE 0x00020000 /* #SERR */ ++#define PCIE_INTRBCTRL_ISA_ENABLE 0x00040000 /* ISA enable, IO 64KB only */ ++#define PCIE_INTRBCTRL_VGA_ENABLE 0x00080000 /* VGA enable */ ++#define PCIE_INTRBCTRL_VGA_16BIT_DECODE 0x00100000 /* VGA 16bit decode */ ++#define PCIE_INTRBCTRL_RST_SECONDARY_BUS 0x00400000 /* Secondary bus rest, hot rest, 1ms */ ++/* Others are read only */ ++enum { ++ PCIE_INTRBCTRL_INT_NON = 0, ++ PCIE_INTRBCTRL_INTA, ++ PCIE_INTRBCTRL_INTB, ++ PCIE_INTRBCTRL_INTC, ++ PCIE_INTRBCTRL_INTD, ++}; ++ ++#define PCIE_PM_CAPR(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x40) ++ ++/* Power Management Control and Status Register */ ++#define PCIE_PM_CSR(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x44) ++ ++#define PCIE_PM_CSR_POWER_STATE 0x00000003 /* Power State */ ++#define PCIE_PM_CSR_POWER_STATE_S 0 ++#define PCIE_PM_CSR_SW_RST 0x00000008 /* Soft Reset Enabled */ ++#define PCIE_PM_CSR_PME_ENABLE 0x00000100 /* PME Enable */ ++#define PCIE_PM_CSR_PME_STATUS 0x00008000 /* PME status */ ++ ++/* MSI Capability Register for EP */ ++#define PCIE_MCAPR(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x50) ++ ++#define PCIE_MCAPR_MSI_CAP_ID 0x000000FF /* MSI Capability ID */ ++#define PCIE_MCAPR_MSI_CAP_ID_S 0 ++#define PCIE_MCAPR_MSI_NEXT_CAP_PTR 0x0000FF00 /* Next Capability Pointer */ ++#define PCIE_MCAPR_MSI_NEXT_CAP_PTR_S 8 ++#define PCIE_MCAPR_MSI_ENABLE 0x00010000 /* MSI Enable */ ++#define PCIE_MCAPR_MULTI_MSG_CAP 0x000E0000 /* Multiple Message Capable */ ++#define PCIE_MCAPR_MULTI_MSG_CAP_S 17 ++#define PCIE_MCAPR_MULTI_MSG_ENABLE 0x00700000 /* Multiple Message Enable */ ++#define PCIE_MCAPR_MULTI_MSG_ENABLE_S 20 ++#define PCIE_MCAPR_ADDR64_CAP 0X00800000 /* 64-bit Address Capable */ ++ ++/* MSI Message Address Register */ ++#define PCIE_MA(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x54) ++ ++#define PCIE_MA_ADDR_MASK 0xFFFFFFFC /* Message Address */ ++ ++/* MSI Message Upper Address Register */ ++#define PCIE_MUA(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x58) ++ ++/* MSI Message Data Register */ ++#define PCIE_MD(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x5C) ++ ++#define PCIE_MD_DATA 0x0000FFFF /* Message Data */ ++#define PCIE_MD_DATA_S 0 ++ ++/* PCI Express Capability Register */ ++#define PCIE_XCAP(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x70) ++ ++#define PCIE_XCAP_ID 0x000000FF /* PCI Express Capability ID */ ++#define PCIE_XCAP_ID_S 0 ++#define PCIE_XCAP_NEXT_CAP 0x0000FF00 /* Next Capability Pointer */ ++#define PCIE_XCAP_NEXT_CAP_S 8 ++#define PCIE_XCAP_VER 0x000F0000 /* PCI Express Capability Version */ ++#define PCIE_XCAP_VER_S 16 ++#define PCIE_XCAP_DEV_PORT_TYPE 0x00F00000 /* Device Port Type */ ++#define PCIE_XCAP_DEV_PORT_TYPE_S 20 ++#define PCIE_XCAP_SLOT_IMPLEMENTED 0x01000000 /* Slot Implemented */ ++#define PCIE_XCAP_MSG_INT_NUM 0x3E000000 /* Interrupt Message Number */ ++#define PCIE_XCAP_MSG_INT_NUM_S 25 ++ ++/* Device Capability Register */ ++#define PCIE_DCAP(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x74) ++ ++#define PCIE_DCAP_MAX_PAYLOAD_SIZE 0x00000007 /* Max Payload size */ ++#define PCIE_DCAP_MAX_PAYLOAD_SIZE_S 0 ++#define PCIE_DCAP_PHANTOM_FUNC 0x00000018 /* Phanton Function, not supported */ ++#define PCIE_DCAP_PHANTOM_FUNC_S 3 ++#define PCIE_DCAP_EXT_TAG 0x00000020 /* Extended Tag Field */ ++#define PCIE_DCAP_EP_L0S_LATENCY 0x000001C0 /* EP L0s latency only */ ++#define PCIE_DCAP_EP_L0S_LATENCY_S 6 ++#define PCIE_DCAP_EP_L1_LATENCY 0x00000E00 /* EP L1 latency only */ ++#define PCIE_DCAP_EP_L1_LATENCY_S 9 ++#define PCIE_DCAP_ROLE_BASE_ERR_REPORT 0x00008000 /* Role Based ERR */ ++ ++/* Maximum payload size supported */ ++enum { ++ PCIE_MAX_PAYLOAD_128 = 0, ++ PCIE_MAX_PAYLOAD_256, ++ PCIE_MAX_PAYLOAD_512, ++ PCIE_MAX_PAYLOAD_1024, ++ PCIE_MAX_PAYLOAD_2048, ++ PCIE_MAX_PAYLOAD_4096, ++}; ++ ++/* Device Control and Status Register */ ++#define PCIE_DCTLSTS(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x78) ++ ++#define PCIE_DCTLSTS_CORRECTABLE_ERR_EN 0x00000001 /* COR-ERR */ ++#define PCIE_DCTLSTS_NONFATAL_ERR_EN 0x00000002 /* Non-fatal ERR */ ++#define PCIE_DCTLSTS_FATAL_ERR_EN 0x00000004 /* Fatal ERR */ ++#define PCIE_DCTLSYS_UR_REQ_EN 0x00000008 /* UR ERR */ ++#define PCIE_DCTLSTS_RELAXED_ORDERING_EN 0x00000010 /* Enable relaxing ordering */ ++#define PCIE_DCTLSTS_MAX_PAYLOAD_SIZE 0x000000E0 /* Max payload mask */ ++#define PCIE_DCTLSTS_MAX_PAYLOAD_SIZE_S 5 ++#define PCIE_DCTLSTS_EXT_TAG_EN 0x00000100 /* Extended tag field */ ++#define PCIE_DCTLSTS_PHANTOM_FUNC_EN 0x00000200 /* Phantom Function Enable */ ++#define PCIE_DCTLSTS_AUX_PM_EN 0x00000400 /* AUX Power PM Enable */ ++#define PCIE_DCTLSTS_NO_SNOOP_EN 0x00000800 /* Enable no snoop, except root port*/ ++#define PCIE_DCTLSTS_MAX_READ_SIZE 0x00007000 /* Max Read Request size*/ ++#define PCIE_DCTLSTS_MAX_READ_SIZE_S 12 ++#define PCIE_DCTLSTS_CORRECTABLE_ERR 0x00010000 /* COR-ERR Detected */ ++#define PCIE_DCTLSTS_NONFATAL_ERR 0x00020000 /* Non-Fatal ERR Detected */ ++#define PCIE_DCTLSTS_FATAL_ER 0x00040000 /* Fatal ERR Detected */ ++#define PCIE_DCTLSTS_UNSUPPORTED_REQ 0x00080000 /* UR Detected */ ++#define PCIE_DCTLSTS_AUX_POWER 0x00100000 /* Aux Power Detected */ ++#define PCIE_DCTLSTS_TRANSACT_PENDING 0x00200000 /* Transaction pending */ ++ ++#define PCIE_DCTLSTS_ERR_EN (PCIE_DCTLSTS_CORRECTABLE_ERR_EN | \ ++ PCIE_DCTLSTS_NONFATAL_ERR_EN | PCIE_DCTLSTS_FATAL_ERR_EN | \ ++ PCIE_DCTLSYS_UR_REQ_EN) ++ ++/* Link Capability Register */ ++#define PCIE_LCAP(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x7C) ++#define PCIE_LCAP_MAX_LINK_SPEED 0x0000000F /* Max link speed, 0x1 by default */ ++#define PCIE_LCAP_MAX_LINK_SPEED_S 0 ++#define PCIE_LCAP_MAX_LENGTH_WIDTH 0x000003F0 /* Maxium Length Width */ ++#define PCIE_LCAP_MAX_LENGTH_WIDTH_S 4 ++#define PCIE_LCAP_ASPM_LEVEL 0x00000C00 /* Active State Link PM Support */ ++#define PCIE_LCAP_ASPM_LEVEL_S 10 ++#define PCIE_LCAP_L0S_EIXT_LATENCY 0x00007000 /* L0s Exit Latency */ ++#define PCIE_LCAP_L0S_EIXT_LATENCY_S 12 ++#define PCIE_LCAP_L1_EXIT_LATENCY 0x00038000 /* L1 Exit Latency */ ++#define PCIE_LCAP_L1_EXIT_LATENCY_S 15 ++#define PCIE_LCAP_CLK_PM 0x00040000 /* Clock Power Management */ ++#define PCIE_LCAP_SDER 0x00080000 /* Surprise Down Error Reporting */ ++#define PCIE_LCAP_DLL_ACTIVE_REPROT 0x00100000 /* Data Link Layer Active Reporting Capable */ ++#define PCIE_LCAP_PORT_NUM 0xFF0000000 /* Port number */ ++#define PCIE_LCAP_PORT_NUM_S 24 ++ ++/* Maximum Length width definition */ ++#define PCIE_MAX_LENGTH_WIDTH_RES 0x00 ++#define PCIE_MAX_LENGTH_WIDTH_X1 0x01 /* Default */ ++#define PCIE_MAX_LENGTH_WIDTH_X2 0x02 ++#define PCIE_MAX_LENGTH_WIDTH_X4 0x04 ++#define PCIE_MAX_LENGTH_WIDTH_X8 0x08 ++#define PCIE_MAX_LENGTH_WIDTH_X12 0x0C ++#define PCIE_MAX_LENGTH_WIDTH_X16 0x10 ++#define PCIE_MAX_LENGTH_WIDTH_X32 0x20 ++ ++/* Active State Link PM definition */ ++enum { ++ PCIE_ASPM_RES0 = 0, ++ PCIE_ASPM_L0S_ENTRY_SUPPORT, /* L0s */ ++ PCIE_ASPM_RES1, ++ PCIE_ASPM_L0S_L1_ENTRY_SUPPORT, /* L0s and L1, default */ ++}; ++ ++/* L0s Exit Latency definition */ ++enum { ++ PCIE_L0S_EIXT_LATENCY_L64NS = 0, /* < 64 ns */ ++ PCIE_L0S_EIXT_LATENCY_B64A128, /* > 64 ns < 128 ns */ ++ PCIE_L0S_EIXT_LATENCY_B128A256, /* > 128 ns < 256 ns */ ++ PCIE_L0S_EIXT_LATENCY_B256A512, /* > 256 ns < 512 ns */ ++ PCIE_L0S_EIXT_LATENCY_B512TO1U, /* > 512 ns < 1 us */ ++ PCIE_L0S_EIXT_LATENCY_B1A2U, /* > 1 us < 2 us */ ++ PCIE_L0S_EIXT_LATENCY_B2A4U, /* > 2 us < 4 us */ ++ PCIE_L0S_EIXT_LATENCY_M4US, /* > 4 us */ ++}; ++ ++/* L1 Exit Latency definition */ ++enum { ++ PCIE_L1_EXIT_LATENCY_L1US = 0, /* < 1 us */ ++ PCIE_L1_EXIT_LATENCY_B1A2, /* > 1 us < 2 us */ ++ PCIE_L1_EXIT_LATENCY_B2A4, /* > 2 us < 4 us */ ++ PCIE_L1_EXIT_LATENCY_B4A8, /* > 4 us < 8 us */ ++ PCIE_L1_EXIT_LATENCY_B8A16, /* > 8 us < 16 us */ ++ PCIE_L1_EXIT_LATENCY_B16A32, /* > 16 us < 32 us */ ++ PCIE_L1_EXIT_LATENCY_B32A64, /* > 32 us < 64 us */ ++ PCIE_L1_EXIT_LATENCY_M64US, /* > 64 us */ ++}; ++ ++/* Link Control and Status Register */ ++#define PCIE_LCTLSTS(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x80) ++#define PCIE_LCTLSTS_ASPM_ENABLE 0x00000003 /* Active State Link PM Control */ ++#define PCIE_LCTLSTS_ASPM_ENABLE_S 0 ++#define PCIE_LCTLSTS_RCB128 0x00000008 /* Read Completion Boundary 128*/ ++#define PCIE_LCTLSTS_LINK_DISABLE 0x00000010 /* Link Disable */ ++#define PCIE_LCTLSTS_RETRIAN_LINK 0x00000020 /* Retrain Link */ ++#define PCIE_LCTLSTS_COM_CLK_CFG 0x00000040 /* Common Clock Configuration */ ++#define PCIE_LCTLSTS_EXT_SYNC 0x00000080 /* Extended Synch */ ++#define PCIE_LCTLSTS_CLK_PM_EN 0x00000100 /* Enable Clock Powerm Management */ ++#define PCIE_LCTLSTS_LINK_SPEED 0x000F0000 /* Link Speed */ ++#define PCIE_LCTLSTS_LINK_SPEED_S 16 ++#define PCIE_LCTLSTS_NEGOTIATED_LINK_WIDTH 0x03F00000 /* Negotiated Link Width */ ++#define PCIE_LCTLSTS_NEGOTIATED_LINK_WIDTH_S 20 ++#define PCIE_LCTLSTS_RETRAIN_PENDING 0x08000000 /* Link training is ongoing */ ++#define PCIE_LCTLSTS_SLOT_CLK_CFG 0x10000000 /* Slot Clock Configuration */ ++#define PCIE_LCTLSTS_DLL_ACTIVE 0x20000000 /* Data Link Layer Active */ ++ ++/* Slot Capabilities Register */ ++#define PCIE_SLCAP(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x84) ++ ++/* Slot Capabilities */ ++#define PCIE_SLCTLSTS(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x88) ++ ++/* Root Control and Capability Register */ ++#define PCIE_RCTLCAP(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x8C) ++#define PCIE_RCTLCAP_SERR_ON_CORRECTABLE_ERR 0x00000001 /* #SERR on COR-ERR */ ++#define PCIE_RCTLCAP_SERR_ON_NONFATAL_ERR 0x00000002 /* #SERR on Non-Fatal ERR */ ++#define PCIE_RCTLCAP_SERR_ON_FATAL_ERR 0x00000004 /* #SERR on Fatal ERR */ ++#define PCIE_RCTLCAP_PME_INT_EN 0x00000008 /* PME Interrupt Enable */ ++#define PCIE_RCTLCAP_SERR_ENABLE (PCIE_RCTLCAP_SERR_ON_CORRECTABLE_ERR | \ ++ PCIE_RCTLCAP_SERR_ON_NONFATAL_ERR | PCIE_RCTLCAP_SERR_ON_FATAL_ERR) ++/* Root Status Register */ ++#define PCIE_RSTS(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x90) ++#define PCIE_RSTS_PME_REQ_ID 0x0000FFFF /* PME Request ID */ ++#define PCIE_RSTS_PME_REQ_ID_S 0 ++#define PCIE_RSTS_PME_STATUS 0x00010000 /* PME Status */ ++#define PCIE_RSTS_PME_PENDING 0x00020000 /* PME Pending */ ++ ++/* PCI Express Enhanced Capability Header */ ++#define PCIE_ENHANCED_CAP(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x100) ++#define PCIE_ENHANCED_CAP_ID 0x0000FFFF /* PCI Express Extended Capability ID */ ++#define PCIE_ENHANCED_CAP_ID_S 0 ++#define PCIE_ENHANCED_CAP_VER 0x000F0000 /* Capability Version */ ++#define PCIE_ENHANCED_CAP_VER_S 16 ++#define PCIE_ENHANCED_CAP_NEXT_OFFSET 0xFFF00000 /* Next Capability Offset */ ++#define PCIE_ENHANCED_CAP_NEXT_OFFSET_S 20 ++ ++/* Uncorrectable Error Status Register */ ++#define PCIE_UES_R(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x104) ++#define PCIE_DATA_LINK_PROTOCOL_ERR 0x00000010 /* Data Link Protocol Error Status */ ++#define PCIE_SURPRISE_DOWN_ERROR 0x00000020 /* Surprise Down Error Status */ ++#define PCIE_POISONED_TLP 0x00001000 /* Poisoned TLP Status */ ++#define PCIE_FC_PROTOCOL_ERR 0x00002000 /* Flow Control Protocol Error Status */ ++#define PCIE_COMPLETION_TIMEOUT 0x00004000 /* Completion Timeout Status */ ++#define PCIE_COMPLETOR_ABORT 0x00008000 /* Completer Abort Error */ ++#define PCIE_UNEXPECTED_COMPLETION 0x00010000 /* Unexpected Completion Status */ ++#define PCIE_RECEIVER_OVERFLOW 0x00020000 /* Receive Overflow Status */ ++#define PCIE_MALFORNED_TLP 0x00040000 /* Malformed TLP Stauts */ ++#define PCIE_ECRC_ERR 0x00080000 /* ECRC Error Stauts */ ++#define PCIE_UR_REQ 0x00100000 /* Unsupported Request Error Status */ ++#define PCIE_ALL_UNCORRECTABLE_ERR (PCIE_DATA_LINK_PROTOCOL_ERR | PCIE_SURPRISE_DOWN_ERROR | \ ++ PCIE_POISONED_TLP | PCIE_FC_PROTOCOL_ERR | PCIE_COMPLETION_TIMEOUT | \ ++ PCIE_COMPLETOR_ABORT | PCIE_UNEXPECTED_COMPLETION | PCIE_RECEIVER_OVERFLOW |\ ++ PCIE_MALFORNED_TLP | PCIE_ECRC_ERR | PCIE_UR_REQ) ++ ++/* Uncorrectable Error Mask Register, Mask means no report */ ++#define PCIE_UEMR(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x108) ++ ++/* Uncorrectable Error Severity Register */ ++#define PCIE_UESR(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x10C) ++ ++/* Correctable Error Status Register */ ++#define PCIE_CESR(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x110) ++#define PCIE_RX_ERR 0x00000001 /* Receive Error Status */ ++#define PCIE_BAD_TLP 0x00000040 /* Bad TLP Status */ ++#define PCIE_BAD_DLLP 0x00000080 /* Bad DLLP Status */ ++#define PCIE_REPLAY_NUM_ROLLOVER 0x00000100 /* Replay Number Rollover Status */ ++#define PCIE_REPLAY_TIMER_TIMEOUT_ERR 0x00001000 /* Reply Timer Timeout Status */ ++#define PCIE_ADVISORY_NONFTAL_ERR 0x00002000 /* Advisory Non-Fatal Error Status */ ++#define PCIE_CORRECTABLE_ERR (PCIE_RX_ERR | PCIE_BAD_TLP | PCIE_BAD_DLLP | PCIE_REPLAY_NUM_ROLLOVER |\ ++ PCIE_REPLAY_TIMER_TIMEOUT_ERR | PCIE_ADVISORY_NONFTAL_ERR) ++ ++/* Correctable Error Mask Register */ ++#define PCIE_CEMR(X) (volatile u32*)(PCIE_RC_CFG_BASE + 0x114) ++ ++/* Advanced Error Capabilities and Control Register */ ++#define PCIE_AECCR(X) (volatile u32*)(PCIE_RC_CFG_BASE + 0x118) ++#define PCIE_AECCR_FIRST_ERR_PTR 0x0000001F /* First Error Pointer */ ++#define PCIE_AECCR_FIRST_ERR_PTR_S 0 ++#define PCIE_AECCR_ECRC_GEN_CAP 0x00000020 /* ECRC Generation Capable */ ++#define PCIE_AECCR_ECRC_GEN_EN 0x00000040 /* ECRC Generation Enable */ ++#define PCIE_AECCR_ECRC_CHECK_CAP 0x00000080 /* ECRC Check Capable */ ++#define PCIE_AECCR_ECRC_CHECK_EN 0x00000100 /* ECRC Check Enable */ ++ ++/* Header Log Register 1 */ ++#define PCIE_HLR1(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x11C) ++ ++/* Header Log Register 2 */ ++#define PCIE_HLR2(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x120) ++ ++/* Header Log Register 3 */ ++#define PCIE_HLR3(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x124) ++ ++/* Header Log Register 4 */ ++#define PCIE_HLR4(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x128) ++ ++/* Root Error Command Register */ ++#define PCIE_RECR(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x12C) ++#define PCIE_RECR_CORRECTABLE_ERR_REPORT_EN 0x00000001 /* COR-ERR */ ++#define PCIE_RECR_NONFATAL_ERR_REPORT_EN 0x00000002 /* Non-Fatal ERR */ ++#define PCIE_RECR_FATAL_ERR_REPORT_EN 0x00000004 /* Fatal ERR */ ++#define PCIE_RECR_ERR_REPORT_EN (PCIE_RECR_CORRECTABLE_ERR_REPORT_EN | \ ++ PCIE_RECR_NONFATAL_ERR_REPORT_EN | PCIE_RECR_FATAL_ERR_REPORT_EN) ++ ++/* Root Error Status Register */ ++#define PCIE_RESR(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x130) ++#define PCIE_RESR_CORRECTABLE_ERR 0x00000001 /* COR-ERR Receveid */ ++#define PCIE_RESR_MULTI_CORRECTABLE_ERR 0x00000002 /* Multiple COR-ERR Received */ ++#define PCIE_RESR_FATAL_NOFATAL_ERR 0x00000004 /* ERR Fatal/Non-Fatal Received */ ++#define PCIE_RESR_MULTI_FATAL_NOFATAL_ERR 0x00000008 /* Multiple ERR Fatal/Non-Fatal Received */ ++#define PCIE_RESR_FIRST_UNCORRECTABLE_FATAL_ERR 0x00000010 /* First UN-COR Fatal */ ++#define PCIR_RESR_NON_FATAL_ERR 0x00000020 /* Non-Fatal Error Message Received */ ++#define PCIE_RESR_FATAL_ERR 0x00000040 /* Fatal Message Received */ ++#define PCIE_RESR_AER_INT_MSG_NUM 0xF8000000 /* Advanced Error Interrupt Message Number */ ++#define PCIE_RESR_AER_INT_MSG_NUM_S 27 ++ ++/* Error Source Indentification Register */ ++#define PCIE_ESIR(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x134) ++#define PCIE_ESIR_CORRECTABLE_ERR_SRC_ID 0x0000FFFF ++#define PCIE_ESIR_CORRECTABLE_ERR_SRC_ID_S 0 ++#define PCIE_ESIR_FATAL_NON_FATAL_SRC_ID 0xFFFF0000 ++#define PCIE_ESIR_FATAL_NON_FATAL_SRC_ID_S 16 ++ ++/* VC Enhanced Capability Header */ ++#define PCIE_VC_ECH(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x140) ++ ++/* Port VC Capability Register */ ++#define PCIE_PVC1(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x144) ++#define PCIE_PVC1_EXT_VC_CNT 0x00000007 /* Extended VC Count */ ++#define PCIE_PVC1_EXT_VC_CNT_S 0 ++#define PCIE_PVC1_LOW_PRI_EXT_VC_CNT 0x00000070 /* Low Priority Extended VC Count */ ++#define PCIE_PVC1_LOW_PRI_EXT_VC_CNT_S 4 ++#define PCIE_PVC1_REF_CLK 0x00000300 /* Reference Clock */ ++#define PCIE_PVC1_REF_CLK_S 8 ++#define PCIE_PVC1_PORT_ARB_TAB_ENTRY_SIZE 0x00000C00 /* Port Arbitration Table Entry Size */ ++#define PCIE_PVC1_PORT_ARB_TAB_ENTRY_SIZE_S 10 ++ ++/* Extended Virtual Channel Count Defintion */ ++#define PCIE_EXT_VC_CNT_MIN 0 ++#define PCIE_EXT_VC_CNT_MAX 7 ++ ++/* Port Arbitration Table Entry Size Definition */ ++enum { ++ PCIE_PORT_ARB_TAB_ENTRY_SIZE_S1BIT = 0, ++ PCIE_PORT_ARB_TAB_ENTRY_SIZE_S2BIT, ++ PCIE_PORT_ARB_TAB_ENTRY_SIZE_S4BIT, ++ PCIE_PORT_ARB_TAB_ENTRY_SIZE_S8BIT, ++}; ++ ++/* Port VC Capability Register 2 */ ++#define PCIE_PVC2(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x148) ++#define PCIE_PVC2_VC_ARB_16P_FIXED_WRR 0x00000001 /* HW Fixed arbitration, 16 phase WRR */ ++#define PCIE_PVC2_VC_ARB_32P_WRR 0x00000002 /* 32 phase WRR */ ++#define PCIE_PVC2_VC_ARB_64P_WRR 0x00000004 /* 64 phase WRR */ ++#define PCIE_PVC2_VC_ARB_128P_WRR 0x00000008 /* 128 phase WRR */ ++#define PCIE_PVC2_VC_ARB_WRR 0x0000000F ++#define PCIE_PVC2_VC_ARB_TAB_OFFSET 0xFF000000 /* VC arbitration table offset, not support */ ++#define PCIE_PVC2_VC_ARB_TAB_OFFSET_S 24 ++ ++/* Port VC Control and Status Register */ ++#define PCIE_PVCCRSR(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x14C) ++#define PCIE_PVCCRSR_LOAD_VC_ARB_TAB 0x00000001 /* Load VC Arbitration Table */ ++#define PCIE_PVCCRSR_VC_ARB_SEL 0x0000000E /* VC Arbitration Select */ ++#define PCIE_PVCCRSR_VC_ARB_SEL_S 1 ++#define PCIE_PVCCRSR_VC_ARB_TAB_STATUS 0x00010000 /* Arbitration Status */ ++ ++/* VC0 Resource Capability Register */ ++#define PCIE_VC0_RC(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x150) ++#define PCIE_VC0_RC_PORT_ARB_HW_FIXED 0x00000001 /* HW Fixed arbitration */ ++#define PCIE_VC0_RC_PORT_ARB_32P_WRR 0x00000002 /* 32 phase WRR */ ++#define PCIE_VC0_RC_PORT_ARB_64P_WRR 0x00000004 /* 64 phase WRR */ ++#define PCIE_VC0_RC_PORT_ARB_128P_WRR 0x00000008 /* 128 phase WRR */ ++#define PCIE_VC0_RC_PORT_ARB_TM_128P_WRR 0x00000010 /* Time-based 128 phase WRR */ ++#define PCIE_VC0_RC_PORT_ARB_TM_256P_WRR 0x00000020 /* Time-based 256 phase WRR */ ++#define PCIE_VC0_RC_PORT_ARB (PCIE_VC0_RC_PORT_ARB_HW_FIXED | PCIE_VC0_RC_PORT_ARB_32P_WRR |\ ++ PCIE_VC0_RC_PORT_ARB_64P_WRR | PCIE_VC0_RC_PORT_ARB_128P_WRR | \ ++ PCIE_VC0_RC_PORT_ARB_TM_128P_WRR | PCIE_VC0_RC_PORT_ARB_TM_256P_WRR) ++ ++#define PCIE_VC0_RC_REJECT_SNOOP 0x00008000 /* Reject Snoop Transactioin */ ++#define PCIE_VC0_RC_MAX_TIMESLOTS 0x007F0000 /* Maximum time Slots */ ++#define PCIE_VC0_RC_MAX_TIMESLOTS_S 16 ++#define PCIE_VC0_RC_PORT_ARB_TAB_OFFSET 0xFF000000 /* Port Arbitration Table Offset */ ++#define PCIE_VC0_RC_PORT_ARB_TAB_OFFSET_S 24 ++ ++/* VC0 Resource Control Register */ ++#define PCIE_VC0_RC0(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x154) ++#define PCIE_VC0_RC0_TVM0 0x00000001 /* TC0 and VC0 */ ++#define PCIE_VC0_RC0_TVM1 0x00000002 /* TC1 and VC1 */ ++#define PCIE_VC0_RC0_TVM2 0x00000004 /* TC2 and VC2 */ ++#define PCIE_VC0_RC0_TVM3 0x00000008 /* TC3 and VC3 */ ++#define PCIE_VC0_RC0_TVM4 0x00000010 /* TC4 and VC4 */ ++#define PCIE_VC0_RC0_TVM5 0x00000020 /* TC5 and VC5 */ ++#define PCIE_VC0_RC0_TVM6 0x00000040 /* TC6 and VC6 */ ++#define PCIE_VC0_RC0_TVM7 0x00000080 /* TC7 and VC7 */ ++#define PCIE_VC0_RC0_TC_VC 0x000000FF /* TC/VC mask */ ++ ++#define PCIE_VC0_RC0_LOAD_PORT_ARB_TAB 0x00010000 /* Load Port Arbitration Table */ ++#define PCIE_VC0_RC0_PORT_ARB_SEL 0x000E0000 /* Port Arbitration Select */ ++#define PCIE_VC0_RC0_PORT_ARB_SEL_S 17 ++#define PCIE_VC0_RC0_VC_ID 0x07000000 /* VC ID */ ++#define PCIE_VC0_RC0_VC_ID_S 24 ++#define PCIE_VC0_RC0_VC_EN 0x80000000 /* VC Enable */ ++ ++/* VC0 Resource Status Register */ ++#define PCIE_VC0_RSR0(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x158) ++#define PCIE_VC0_RSR0_PORT_ARB_TAB_STATUS 0x00010000 /* Port Arbitration Table Status,not used */ ++#define PCIE_VC0_RSR0_VC_NEG_PENDING 0x00020000 /* VC Negotiation Pending */ ++ ++/* Ack Latency Timer and Replay Timer Register */ ++#define PCIE_ALTRT(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x700) ++#define PCIE_ALTRT_ROUND_TRIP_LATENCY_LIMIT 0x0000FFFF /* Round Trip Latency Time Limit */ ++#define PCIE_ALTRT_ROUND_TRIP_LATENCY_LIMIT_S 0 ++#define PCIE_ALTRT_REPLAY_TIME_LIMIT 0xFFFF0000 /* Replay Time Limit */ ++#define PCIE_ALTRT_REPLAY_TIME_LIMIT_S 16 ++ ++/* Other Message Register */ ++#define PCIE_OMR(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x704) ++ ++/* Port Force Link Register */ ++#define PCIE_PFLR(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x708) ++#define PCIE_PFLR_LINK_NUM 0x000000FF /* Link Number */ ++#define PCIE_PFLR_LINK_NUM_S 0 ++#define PCIE_PFLR_FORCE_LINK 0x00008000 /* Force link */ ++#define PCIE_PFLR_LINK_STATE 0x003F0000 /* Link State */ ++#define PCIE_PFLR_LINK_STATE_S 16 ++#define PCIE_PFLR_LOW_POWER_ENTRY_CNT 0xFF000000 /* Low Power Entrance Count, only for EP */ ++#define PCIE_PFLR_LOW_POWER_ENTRY_CNT_S 24 ++ ++/* Ack Frequency Register */ ++#define PCIE_AFR(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x70C) ++#define PCIE_AFR_AF 0x000000FF /* Ack Frequency */ ++#define PCIE_AFR_AF_S 0 ++#define PCIE_AFR_FTS_NUM 0x0000FF00 /* The number of Fast Training Sequence from L0S to L0 */ ++#define PCIE_AFR_FTS_NUM_S 8 ++#define PCIE_AFR_COM_FTS_NUM 0x00FF0000 /* N_FTS; when common clock is used*/ ++#define PCIE_AFR_COM_FTS_NUM_S 16 ++#define PCIE_AFR_L0S_ENTRY_LATENCY 0x07000000 /* L0s Entrance Latency */ ++#define PCIE_AFR_L0S_ENTRY_LATENCY_S 24 ++#define PCIE_AFR_L1_ENTRY_LATENCY 0x38000000 /* L1 Entrance Latency */ ++#define PCIE_AFR_L1_ENTRY_LATENCY_S 27 ++#define PCIE_AFR_FTS_NUM_DEFAULT 32 ++#define PCIE_AFR_L0S_ENTRY_LATENCY_DEFAULT 7 ++#define PCIE_AFR_L1_ENTRY_LATENCY_DEFAULT 5 ++ ++/* Port Link Control Register */ ++#define PCIE_PLCR(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x710) ++#define PCIE_PLCR_OTHER_MSG_REQ 0x00000001 /* Other Message Request */ ++#define PCIE_PLCR_SCRAMBLE_DISABLE 0x00000002 /* Scramble Disable */ ++#define PCIE_PLCR_LOOPBACK_EN 0x00000004 /* Loopback Enable */ ++#define PCIE_PLCR_LTSSM_HOT_RST 0x00000008 /* Force LTSSM to the hot reset */ ++#define PCIE_PLCR_DLL_LINK_EN 0x00000020 /* Enable Link initialization */ ++#define PCIE_PLCR_FAST_LINK_SIM_EN 0x00000080 /* Sets all internal timers to fast mode for simulation purposes */ ++#define PCIE_PLCR_LINK_MODE 0x003F0000 /* Link Mode Enable Mask */ ++#define PCIE_PLCR_LINK_MODE_S 16 ++#define PCIE_PLCR_CORRUPTED_CRC_EN 0x02000000 /* Enabled Corrupt CRC */ ++ ++/* Lane Skew Register */ ++#define PCIE_LSR(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x714) ++#define PCIE_LSR_LANE_SKEW_NUM 0x00FFFFFF /* Insert Lane Skew for Transmit, not applicable */ ++#define PCIE_LSR_LANE_SKEW_NUM_S 0 ++#define PCIE_LSR_FC_DISABLE 0x01000000 /* Disable of Flow Control */ ++#define PCIE_LSR_ACKNAK_DISABLE 0x02000000 /* Disable of Ack/Nak */ ++#define PCIE_LSR_LANE_DESKEW_DISABLE 0x80000000 /* Disable of Lane-to-Lane Skew */ ++ ++/* Symbol Number Register */ ++#define PCIE_SNR(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x718) ++#define PCIE_SNR_TS 0x0000000F /* Number of TS Symbol */ ++#define PCIE_SNR_TS_S 0 ++#define PCIE_SNR_SKP 0x00000700 /* Number of SKP Symbol */ ++#define PCIE_SNR_SKP_S 8 ++#define PCIE_SNR_REPLAY_TIMER 0x0007C000 /* Timer Modifier for Replay Timer */ ++#define PCIE_SNR_REPLAY_TIMER_S 14 ++#define PCIE_SNR_ACKNAK_LATENCY_TIMER 0x00F80000 /* Timer Modifier for Ack/Nak Latency Timer */ ++#define PCIE_SNR_ACKNAK_LATENCY_TIMER_S 19 ++#define PCIE_SNR_FC_TIMER 0x1F000000 /* Timer Modifier for Flow Control Watchdog Timer */ ++#define PCIE_SNR_FC_TIMER_S 28 ++ ++/* Symbol Timer Register and Filter Mask Register 1 */ ++#define PCIE_STRFMR(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x71C) ++#define PCIE_STRFMR_SKP_INTERVAL 0x000007FF /* SKP lnterval Value */ ++#define PCIE_STRFMR_SKP_INTERVAL_S 0 ++#define PCIE_STRFMR_FC_WDT_DISABLE 0x00008000 /* Disable of FC Watchdog Timer */ ++#define PCIE_STRFMR_TLP_FUNC_MISMATCH_OK 0x00010000 /* Mask Function Mismatch Filtering for Incoming Requests */ ++#define PCIE_STRFMR_POISONED_TLP_OK 0x00020000 /* Mask Poisoned TLP Filtering */ ++#define PCIE_STRFMR_BAR_MATCH_OK 0x00040000 /* Mask BAR Match Filtering */ ++#define PCIE_STRFMR_TYPE1_CFG_REQ_OK 0x00080000 /* Mask Type 1 Configuration Request Filtering */ ++#define PCIE_STRFMR_LOCKED_REQ_OK 0x00100000 /* Mask Locked Request Filtering */ ++#define PCIE_STRFMR_CPL_TAG_ERR_RULES_OK 0x00200000 /* Mask Tag Error Rules for Received Completions */ ++#define PCIE_STRFMR_CPL_REQUESTOR_ID_MISMATCH_OK 0x00400000 /* Mask Requester ID Mismatch Error for Received Completions */ ++#define PCIE_STRFMR_CPL_FUNC_MISMATCH_OK 0x00800000 /* Mask Function Mismatch Error for Received Completions */ ++#define PCIE_STRFMR_CPL_TC_MISMATCH_OK 0x01000000 /* Mask Traffic Class Mismatch Error for Received Completions */ ++#define PCIE_STRFMR_CPL_ATTR_MISMATCH_OK 0x02000000 /* Mask Attribute Mismatch Error for Received Completions */ ++#define PCIE_STRFMR_CPL_LENGTH_MISMATCH_OK 0x04000000 /* Mask Length Mismatch Error for Received Completions */ ++#define PCIE_STRFMR_TLP_ECRC_ERR_OK 0x08000000 /* Mask ECRC Error Filtering */ ++#define PCIE_STRFMR_CPL_TLP_ECRC_OK 0x10000000 /* Mask ECRC Error Filtering for Completions */ ++#define PCIE_STRFMR_RX_TLP_MSG_NO_DROP 0x20000000 /* Send Message TLPs */ ++#define PCIE_STRFMR_RX_IO_TRANS_ENABLE 0x40000000 /* Mask Filtering of received I/O Requests */ ++#define PCIE_STRFMR_RX_CFG_TRANS_ENABLE 0x80000000 /* Mask Filtering of Received Configuration Requests */ ++ ++#define PCIE_DEF_SKP_INTERVAL 700 /* 1180 ~1538 , 125MHz * 2, 250MHz * 1 */ ++ ++/* Filter Masker Register 2 */ ++#define PCIE_FMR2(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x720) ++#define PCIE_FMR2_VENDOR_MSG0_PASSED_TO_TRGT1 0x00000001 /* Mask RADM Filtering and Error Handling Rules */ ++#define PCIE_FMR2_VENDOR_MSG1_PASSED_TO_TRGT1 0x00000002 /* Mask RADM Filtering and Error Handling Rules */ ++ ++/* Debug Register 0 */ ++#define PCIE_DBR0(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x728) ++ ++/* Debug Register 1 */ ++#define PCIE_DBR1(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x72C) ++ ++/* Transmit Posted FC Credit Status Register */ ++#define PCIE_TPFCS(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x730) ++#define PCIE_TPFCS_TX_P_DATA_FC_CREDITS 0x00000FFF /* Transmit Posted Data FC Credits */ ++#define PCIE_TPFCS_TX_P_DATA_FC_CREDITS_S 0 ++#define PCIE_TPFCS_TX_P_HDR_FC_CREDITS 0x000FF000 /* Transmit Posted Header FC Credits */ ++#define PCIE_TPFCS_TX_P_HDR_FC_CREDITS_S 12 ++ ++/* Transmit Non-Posted FC Credit Status */ ++#define PCIE_TNPFCS(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x734) ++#define PCIE_TNPFCS_TX_NP_DATA_FC_CREDITS 0x00000FFF /* Transmit Non-Posted Data FC Credits */ ++#define PCIE_TNPFCS_TX_NP_DATA_FC_CREDITS_S 0 ++#define PCIE_TNPFCS_TX_NP_HDR_FC_CREDITS 0x000FF000 /* Transmit Non-Posted Header FC Credits */ ++#define PCIE_TNPFCS_TX_NP_HDR_FC_CREDITS_S 12 ++ ++/* Transmit Complete FC Credit Status Register */ ++#define PCIE_TCFCS(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x738) ++#define PCIE_TCFCS_TX_CPL_DATA_FC_CREDITS 0x00000FFF /* Transmit Completion Data FC Credits */ ++#define PCIE_TCFCS_TX_CPL_DATA_FC_CREDITS_S 0 ++#define PCIE_TCFCS_TX_CPL_HDR_FC_CREDITS 0x000FF000 /* Transmit Completion Header FC Credits */ ++#define PCIE_TCFCS_TX_CPL_HDR_FC_CREDITS_S 12 ++ ++/* Queue Status Register */ ++#define PCIE_QSR(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x73C) ++#define PCIE_QSR_WAIT_UPDATE_FC_DLL 0x00000001 /* Received TLP FC Credits Not Returned */ ++#define PCIE_QSR_TX_RETRY_BUF_NOT_EMPTY 0x00000002 /* Transmit Retry Buffer Not Empty */ ++#define PCIE_QSR_RX_QUEUE_NOT_EMPTY 0x00000004 /* Received Queue Not Empty */ ++ ++/* VC Transmit Arbitration Register 1 */ ++#define PCIE_VCTAR1(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x740) ++#define PCIE_VCTAR1_WRR_WEIGHT_VC0 0x000000FF /* WRR Weight for VC0 */ ++#define PCIE_VCTAR1_WRR_WEIGHT_VC1 0x0000FF00 /* WRR Weight for VC1 */ ++#define PCIE_VCTAR1_WRR_WEIGHT_VC2 0x00FF0000 /* WRR Weight for VC2 */ ++#define PCIE_VCTAR1_WRR_WEIGHT_VC3 0xFF000000 /* WRR Weight for VC3 */ ++ ++/* VC Transmit Arbitration Register 2 */ ++#define PCIE_VCTAR2(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x744) ++#define PCIE_VCTAR2_WRR_WEIGHT_VC4 0x000000FF /* WRR Weight for VC4 */ ++#define PCIE_VCTAR2_WRR_WEIGHT_VC5 0x0000FF00 /* WRR Weight for VC5 */ ++#define PCIE_VCTAR2_WRR_WEIGHT_VC6 0x00FF0000 /* WRR Weight for VC6 */ ++#define PCIE_VCTAR2_WRR_WEIGHT_VC7 0xFF000000 /* WRR Weight for VC7 */ ++ ++/* VC0 Posted Receive Queue Control Register */ ++#define PCIE_VC0_PRQCR(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x748) ++#define PCIE_VC0_PRQCR_P_DATA_CREDITS 0x00000FFF /* VC0 Posted Data Credits */ ++#define PCIE_VC0_PRQCR_P_DATA_CREDITS_S 0 ++#define PCIE_VC0_PRQCR_P_HDR_CREDITS 0x000FF000 /* VC0 Posted Header Credits */ ++#define PCIE_VC0_PRQCR_P_HDR_CREDITS_S 12 ++#define PCIE_VC0_PRQCR_P_TLP_QUEUE_MODE 0x00E00000 /* VC0 Posted TLP Queue Mode */ ++#define PCIE_VC0_PRQCR_P_TLP_QUEUE_MODE_S 20 ++#define PCIE_VC0_PRQCR_TLP_RELAX_ORDER 0x40000000 /* TLP Type Ordering for VC0 */ ++#define PCIE_VC0_PRQCR_VC_STRICT_ORDER 0x80000000 /* VC0 Ordering for Receive Queues */ ++ ++/* VC0 Non-Posted Receive Queue Control */ ++#define PCIE_VC0_NPRQCR(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x74C) ++#define PCIE_VC0_NPRQCR_NP_DATA_CREDITS 0x00000FFF /* VC0 Non-Posted Data Credits */ ++#define PCIE_VC0_NPRQCR_NP_DATA_CREDITS_S 0 ++#define PCIE_VC0_NPRQCR_NP_HDR_CREDITS 0x000FF000 /* VC0 Non-Posted Header Credits */ ++#define PCIE_VC0_NPRQCR_NP_HDR_CREDITS_S 12 ++#define PCIE_VC0_NPRQCR_NP_TLP_QUEUE_MODE 0x00E00000 /* VC0 Non-Posted TLP Queue Mode */ ++#define PCIE_VC0_NPRQCR_NP_TLP_QUEUE_MODE_S 20 ++ ++/* VC0 Completion Receive Queue Control */ ++#define PCIE_VC0_CRQCR(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x750) ++#define PCIE_VC0_CRQCR_CPL_DATA_CREDITS 0x00000FFF /* VC0 Completion TLP Queue Mode */ ++#define PCIE_VC0_CRQCR_CPL_DATA_CREDITS_S 0 ++#define PCIE_VC0_CRQCR_CPL_HDR_CREDITS 0x000FF000 /* VC0 Completion Header Credits */ ++#define PCIE_VC0_CRQCR_CPL_HDR_CREDITS_S 12 ++#define PCIE_VC0_CRQCR_CPL_TLP_QUEUE_MODE 0x00E00000 /* VC0 Completion Data Credits */ ++#define PCIE_VC0_CRQCR_CPL_TLP_QUEUE_MODE_S 21 ++ ++/* Applicable to the above three registers */ ++enum { ++ PCIE_VC0_TLP_QUEUE_MODE_STORE_FORWARD = 1, ++ PCIE_VC0_TLP_QUEUE_MODE_CUT_THROUGH = 2, ++ PCIE_VC0_TLP_QUEUE_MODE_BYPASS = 4, ++}; ++ ++/* VC0 Posted Buffer Depth Register */ ++#define PCIE_VC0_PBD(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x7A8) ++#define PCIE_VC0_PBD_P_DATA_QUEUE_ENTRIES 0x00003FFF /* VC0 Posted Data Queue Depth */ ++#define PCIE_VC0_PBD_P_DATA_QUEUE_ENTRIES_S 0 ++#define PCIE_VC0_PBD_P_HDR_QUEUE_ENTRIES 0x03FF0000 /* VC0 Posted Header Queue Depth */ ++#define PCIE_VC0_PBD_P_HDR_QUEUE_ENTRIES_S 16 ++ ++/* VC0 Non-Posted Buffer Depth Register */ ++#define PCIE_VC0_NPBD(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x7AC) ++#define PCIE_VC0_NPBD_NP_DATA_QUEUE_ENTRIES 0x00003FFF /* VC0 Non-Posted Data Queue Depth */ ++#define PCIE_VC0_NPBD_NP_DATA_QUEUE_ENTRIES_S 0 ++#define PCIE_VC0_NPBD_NP_HDR_QUEUE_ENTRIES 0x03FF0000 /* VC0 Non-Posted Header Queue Depth */ ++#define PCIE_VC0_NPBD_NP_HDR_QUEUE_ENTRIES_S 16 ++ ++/* VC0 Completion Buffer Depth Register */ ++#define PCIE_VC0_CBD(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x7B0) ++#define PCIE_VC0_CBD_CPL_DATA_QUEUE_ENTRIES 0x00003FFF /* C0 Completion Data Queue Depth */ ++#define PCIE_VC0_CBD_CPL_DATA_QUEUE_ENTRIES_S 0 ++#define PCIE_VC0_CBD_CPL_HDR_QUEUE_ENTRIES 0x03FF0000 /* VC0 Completion Header Queue Depth */ ++#define PCIE_VC0_CBD_CPL_HDR_QUEUE_ENTRIES_S 16 ++ ++/* PHY Status Register, all zeros in VR9 */ ++#define PCIE_PHYSR(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x810) ++ ++/* PHY Control Register, all zeros in VR9 */ ++#define PCIE_PHYCR(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x814) ++ ++/* ++ * PCIe PDI PHY register definition, suppose all the following ++ * stuff is confidential. ++ * XXX, detailed bit definition ++ */ ++#define PCIE_PHY_PLL_CTRL1(X) (PCIE_PHY_PORT_TO_BASE(X) + (0x22 << 1)) ++#define PCIE_PHY_PLL_CTRL2(X) (PCIE_PHY_PORT_TO_BASE(X) + (0x23 << 1)) ++#define PCIE_PHY_PLL_CTRL3(X) (PCIE_PHY_PORT_TO_BASE(X) + (0x24 << 1)) ++#define PCIE_PHY_PLL_CTRL4(X) (PCIE_PHY_PORT_TO_BASE(X) + (0x25 << 1)) ++#define PCIE_PHY_PLL_CTRL5(X) (PCIE_PHY_PORT_TO_BASE(X) + (0x26 << 1)) ++#define PCIE_PHY_PLL_CTRL6(X) (PCIE_PHY_PORT_TO_BASE(X) + (0x27 << 1)) ++#define PCIE_PHY_PLL_CTRL7(X) (PCIE_PHY_PORT_TO_BASE(X) + (0x28 << 1)) ++#define PCIE_PHY_PLL_A_CTRL1(X) (PCIE_PHY_PORT_TO_BASE(X) + (0x29 << 1)) ++#define PCIE_PHY_PLL_A_CTRL2(X) (PCIE_PHY_PORT_TO_BASE(X) + (0x2A << 1)) ++#define PCIE_PHY_PLL_A_CTRL3(X) (PCIE_PHY_PORT_TO_BASE(X) + (0x2B << 1)) ++#define PCIE_PHY_PLL_STATUS(X) (PCIE_PHY_PORT_TO_BASE(X) + (0x2C << 1)) ++ ++#define PCIE_PHY_TX1_CTRL1(X) (PCIE_PHY_PORT_TO_BASE(X) + (0x30 << 1)) ++#define PCIE_PHY_TX1_CTRL2(X) (PCIE_PHY_PORT_TO_BASE(X) + (0x31 << 1)) ++#define PCIE_PHY_TX1_CTRL3(X) (PCIE_PHY_PORT_TO_BASE(X) + (0x32 << 1)) ++#define PCIE_PHY_TX1_A_CTRL1(X) (PCIE_PHY_PORT_TO_BASE(X) + (0x33 << 1)) ++#define PCIE_PHY_TX1_A_CTRL2(X) (PCIE_PHY_PORT_TO_BASE(X) + (0x34 << 1)) ++#define PCIE_PHY_TX1_MOD1(X) (PCIE_PHY_PORT_TO_BASE(X) + (0x35 << 1)) ++#define PCIE_PHY_TX1_MOD2(X) (PCIE_PHY_PORT_TO_BASE(X) + (0x36 << 1)) ++#define PCIE_PHY_TX1_MOD3(X) (PCIE_PHY_PORT_TO_BASE(X) + (0x37 << 1)) ++ ++#define PCIE_PHY_TX2_CTRL1(X) (PCIE_PHY_PORT_TO_BASE(X) + (0x38 << 1)) ++#define PCIE_PHY_TX2_CTRL2(X) (PCIE_PHY_PORT_TO_BASE(X) + (0x39 << 1)) ++#define PCIE_PHY_TX2_A_CTRL1(X) (PCIE_PHY_PORT_TO_BASE(X) + (0x3B << 1)) ++#define PCIE_PHY_TX2_A_CTRL2(X) (PCIE_PHY_PORT_TO_BASE(X) + (0x3C << 1)) ++#define PCIE_PHY_TX2_MOD1(X) (PCIE_PHY_PORT_TO_BASE(X) + (0x3D << 1)) ++#define PCIE_PHY_TX2_MOD2(X) (PCIE_PHY_PORT_TO_BASE(X) + (0x3E << 1)) ++#define PCIE_PHY_TX2_MOD3(X) (PCIE_PHY_PORT_TO_BASE(X) + (0x3F << 1)) ++ ++#define PCIE_PHY_RX1_CTRL1(X) (PCIE_PHY_PORT_TO_BASE(X) + (0x50 << 1)) ++#define PCIE_PHY_RX1_CTRL2(X) (PCIE_PHY_PORT_TO_BASE(X) + (0x51 << 1)) ++#define PCIE_PHY_RX1_CDR(X) (PCIE_PHY_PORT_TO_BASE(X) + (0x52 << 1)) ++#define PCIE_PHY_RX1_EI(X) (PCIE_PHY_PORT_TO_BASE(X) + (0x53 << 1)) ++#define PCIE_PHY_RX1_A_CTRL(X) (PCIE_PHY_PORT_TO_BASE(X) + (0x55 << 1)) ++ ++/* Interrupt related stuff */ ++#define PCIE_LEGACY_DISABLE 0 ++#define PCIE_LEGACY_INTA 1 ++#define PCIE_LEGACY_INTB 2 ++#define PCIE_LEGACY_INTC 3 ++#define PCIE_LEGACY_INTD 4 ++#define PCIE_LEGACY_INT_MAX PCIE_LEGACY_INTD ++ ++#define PCIE_IRQ_LOCK(lock) do { \ ++ unsigned long flags; \ ++ spin_lock_irqsave(&(lock), flags); ++#define PCIE_IRQ_UNLOCK(lock) \ ++ spin_unlock_irqrestore(&(lock), flags); \ ++} while (0) ++ ++#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,18) ++#define IRQF_SHARED SA_SHIRQ ++#endif ++ ++#define PCIE_MSG_MSI 0x00000001 ++#define PCIE_MSG_ISR 0x00000002 ++#define PCIE_MSG_FIXUP 0x00000004 ++#define PCIE_MSG_READ_CFG 0x00000008 ++#define PCIE_MSG_WRITE_CFG 0x00000010 ++#define PCIE_MSG_CFG (PCIE_MSG_READ_CFG | PCIE_MSG_WRITE_CFG) ++#define PCIE_MSG_REG 0x00000020 ++#define PCIE_MSG_INIT 0x00000040 ++#define PCIE_MSG_ERR 0x00000080 ++#define PCIE_MSG_PHY 0x00000100 ++#define PCIE_MSG_ANY 0x000001ff ++ ++#define IFX_PCIE_PORT0 0 ++#define IFX_PCIE_PORT1 1 ++ ++#ifdef CONFIG_IFX_PCIE_2ND_CORE ++#define IFX_PCIE_CORE_NR 2 ++#else ++#define IFX_PCIE_CORE_NR 1 ++#endif ++ ++//#define IFX_PCIE_ERROR_INT ++ ++//#define IFX_PCIE_DBG ++ ++#if defined(IFX_PCIE_DBG) ++#define IFX_PCIE_PRINT(_m, _fmt, args...) do { \ ++ if (g_pcie_debug_flag & (_m)) { \ ++ ifx_pcie_debug((_fmt), ##args); \ ++ } \ ++} while (0) ++ ++#define INLINE ++#else ++#define IFX_PCIE_PRINT(_m, _fmt, args...) \ ++ do {} while(0) ++#define INLINE inline ++#endif ++ ++struct ifx_pci_controller { ++ struct pci_controller pcic; ++ ++ /* RC specific, per host bus information */ ++ u32 port; /* Port index, 0 -- 1st core, 1 -- 2nd core */ ++}; ++ ++typedef struct ifx_pcie_ir_irq { ++ const unsigned int irq; ++ const char name[16]; ++}ifx_pcie_ir_irq_t; ++ ++typedef struct ifx_pcie_legacy_irq{ ++ const u32 irq_bit; ++ const int irq; ++}ifx_pcie_legacy_irq_t; ++ ++typedef struct ifx_pcie_irq { ++ ifx_pcie_ir_irq_t ir_irq; ++ ifx_pcie_legacy_irq_t legacy_irq[PCIE_LEGACY_INT_MAX]; ++}ifx_pcie_irq_t; ++ ++extern u32 g_pcie_debug_flag; ++extern void ifx_pcie_debug(const char *fmt, ...); ++extern void pcie_phy_clock_mode_setup(int pcie_port); ++extern void pcie_msi_pic_init(int pcie_port); ++extern u32 ifx_pcie_bus_enum_read_hack(int where, u32 value); ++extern u32 ifx_pcie_bus_enum_write_hack(int where, u32 value); ++ ++ ++#include ++#include ++#include ++#include ++ ++#include ++ ++#define IFX_PCIE_GPIO_RESET 38 ++#define IFX_REG_R32 ltq_r32 ++#define IFX_REG_W32 ltq_w32 ++#define CONFIG_IFX_PCIE_HW_SWAP ++#define IFX_RCU_AHB_ENDIAN ((volatile u32*)(IFX_RCU + 0x004C)) ++#define IFX_RCU_RST_REQ ((volatile u32*)(IFX_RCU + 0x0010)) ++#define IFX_RCU_AHB_BE_PCIE_PDI 0x00000080 /* Configure PCIE PDI module in big endian*/ ++ ++#define IFX_RCU (KSEG1 | 0x1F203000) ++#define IFX_RCU_AHB_BE_PCIE_M 0x00000001 /* Configure AHB master port that connects to PCIe RC in big endian */ ++#define IFX_RCU_AHB_BE_PCIE_S 0x00000010 /* Configure AHB slave port that connects to PCIe RC in little endian */ ++#define IFX_RCU_AHB_BE_XBAR_M 0x00000002 /* Configure AHB master port that connects to XBAR in big endian */ ++#define CONFIG_IFX_PCIE_PHY_36MHZ_MODE ++ ++#define IFX_PMU1_MODULE_PCIE_PHY (0) ++#define IFX_PMU1_MODULE_PCIE_CTRL (1) ++#define IFX_PMU1_MODULE_PDI (4) ++#define IFX_PMU1_MODULE_MSI (5) ++ ++#define IFX_PMU_MODULE_PCIE_L0_CLK (31) ++ ++ ++static inline void pcie_ep_gpio_rst_init(int pcie_port) ++{ ++} ++ ++static inline void pcie_ahb_pmu_setup(void) ++{ ++ struct clk *clk; ++ clk = clk_get_sys("ltq_pcie", "ahb"); ++ clk_enable(clk); ++ //ltq_pmu_enable(PMU_AHBM | PMU_AHBS); ++} ++ ++static inline void pcie_rcu_endian_setup(int pcie_port) ++{ ++ u32 reg; ++ ++ reg = IFX_REG_R32(IFX_RCU_AHB_ENDIAN); ++#ifdef CONFIG_IFX_PCIE_HW_SWAP ++ reg |= IFX_RCU_AHB_BE_PCIE_M; ++ reg |= IFX_RCU_AHB_BE_PCIE_S; ++ reg &= ~IFX_RCU_AHB_BE_XBAR_M; ++#else ++ reg |= IFX_RCU_AHB_BE_PCIE_M; ++ reg &= ~IFX_RCU_AHB_BE_PCIE_S; ++ reg &= ~IFX_RCU_AHB_BE_XBAR_M; ++#endif /* CONFIG_IFX_PCIE_HW_SWAP */ ++ IFX_REG_W32(reg, IFX_RCU_AHB_ENDIAN); ++ IFX_PCIE_PRINT(PCIE_MSG_REG, "%s IFX_RCU_AHB_ENDIAN: 0x%08x\n", __func__, IFX_REG_R32(IFX_RCU_AHB_ENDIAN)); ++} ++ ++static inline void pcie_phy_pmu_enable(int pcie_port) ++{ ++ struct clk *clk; ++ clk = clk_get_sys("ltq_pcie", "phy"); ++ clk_enable(clk); ++ //ltq_pmu1_enable(1<PCIe and PDI endianness */ ++ reg |= IFX_RCU_AHB_BE_PCIE_PDI; ++ IFX_REG_W32(reg, IFX_RCU_AHB_ENDIAN); ++} ++ ++static inline void pcie_pdi_pmu_enable(int pcie_port) ++{ ++ struct clk *clk; ++ clk = clk_get_sys("ltq_pcie", "pdi"); ++ clk_enable(clk); ++ //ltq_pmu1_enable(1< 1) { ++ tbus_number -= pcibios_1st_host_bus_nr(); ++ } ++#endif /* CONFIG_PCI_LANTIQ */ ++ return tbus_number; ++} ++ ++static inline u32 ++ifx_pcie_bus_enum_hack(struct pci_bus *bus, u32 devfn, int where, u32 value, int pcie_port, int read) ++{ ++ struct pci_dev *pdev; ++ u32 tvalue = value; ++ ++ /* Sanity check */ ++ pdev = pci_get_slot(bus, devfn); ++ if (pdev == NULL) { ++ return tvalue; ++ } ++ ++ /* Only care about PCI bridge */ ++ if (pdev->hdr_type != PCI_HEADER_TYPE_BRIDGE) { ++ return tvalue; ++ } ++ ++ if (read) { /* Read hack */ ++ #ifdef CONFIG_PCI_LANTIQ ++ if (pcibios_host_nr() > 1) { ++ tvalue = ifx_pcie_bus_enum_read_hack(where, tvalue); ++ } ++ #endif /* CONFIG_PCI_LANTIQ */ ++ } ++ else { /* Write hack */ ++ #ifdef CONFIG_PCI_LANTIQ ++ if (pcibios_host_nr() > 1) { ++ tvalue = ifx_pcie_bus_enum_write_hack(where, tvalue); ++ } ++ #endif ++ } ++ return tvalue; ++} ++ ++#endif /* IFXMIPS_PCIE_VR9_H */ ++ +--- a/drivers/pci/pcie/aer/Kconfig ++++ b/drivers/pci/pcie/aer/Kconfig +@@ -19,6 +19,7 @@ config PCIEAER + config PCIE_ECRC + bool "PCI Express ECRC settings control" + depends on PCIEAER ++ default n + help + Used to override firmware/bios settings for PCI Express ECRC + (transaction layer end-to-end CRC checking). +--- a/include/linux/pci.h ++++ b/include/linux/pci.h +@@ -1175,6 +1175,8 @@ void pci_walk_bus(struct pci_bus *top, i + void *userdata); + int pci_cfg_space_size(struct pci_dev *dev); + unsigned char pci_bus_max_busnr(struct pci_bus *bus); ++int pcibios_host_nr(void); ++int pcibios_1st_host_bus_nr(void); + void pci_setup_bridge(struct pci_bus *bus); + resource_size_t pcibios_window_alignment(struct pci_bus *bus, + unsigned long type); +--- a/include/linux/pci_ids.h ++++ b/include/linux/pci_ids.h +@@ -1053,6 +1053,12 @@ + #define PCI_DEVICE_ID_SGI_LITHIUM 0x1002 + #define PCI_DEVICE_ID_SGI_IOC4 0x100a + ++#define PCI_VENDOR_ID_INFINEON 0x15D1 ++#define PCI_DEVICE_ID_INFINEON_DANUBE 0x000F ++#define PCI_DEVICE_ID_INFINEON_PCIE 0x0011 ++#define PCI_VENDOR_ID_LANTIQ 0x1BEF ++#define PCI_DEVICE_ID_LANTIQ_PCIE 0x00 ++ + #define PCI_VENDOR_ID_WINBOND 0x10ad + #define PCI_DEVICE_ID_WINBOND_82C105 0x0105 + #define PCI_DEVICE_ID_WINBOND_83C553 0x0565 diff --git a/target/linux/lantiq/patches-4.1/0002-MIPS-lantiq-dtb-image-hack.patch b/target/linux/lantiq/patches-4.1/0002-MIPS-lantiq-dtb-image-hack.patch new file mode 100644 index 0000000000..a68607c75b --- /dev/null +++ b/target/linux/lantiq/patches-4.1/0002-MIPS-lantiq-dtb-image-hack.patch @@ -0,0 +1,31 @@ +From 17348293f7f8103c97c8d2a6b0ef36eae06ec371 Mon Sep 17 00:00:00 2001 +From: John Crispin +Date: Wed, 13 Mar 2013 09:36:16 +0100 +Subject: [PATCH 02/36] MIPS: lantiq: dtb image hack + +Signed-off-by: John Crispin +--- + arch/mips/lantiq/Makefile | 2 -- + arch/mips/lantiq/prom.c | 4 +++- + 2 files changed, 3 insertions(+), 3 deletions(-) + +--- a/arch/mips/lantiq/prom.c ++++ b/arch/mips/lantiq/prom.c +@@ -63,6 +63,8 @@ static void __init prom_init_cmdline(voi + } + } + ++extern struct boot_param_header __image_dtb; ++ + void __init plat_mem_setup(void) + { + ioport_resource.start = IOPORT_RESOURCE_START; +@@ -76,7 +78,7 @@ void __init plat_mem_setup(void) + * Load the builtin devicetree. This causes the chosen node to be + * parsed resulting in our memory appearing + */ +- __dt_setup_arch(__dtb_start); ++ __dt_setup_arch(&__image_dtb); + + strlcpy(arcs_cmdline, boot_command_line, COMMAND_LINE_SIZE); + } diff --git a/target/linux/lantiq/patches-4.1/0004-MIPS-lantiq-add-atm-hack.patch b/target/linux/lantiq/patches-4.1/0004-MIPS-lantiq-add-atm-hack.patch new file mode 100644 index 0000000000..53809d0a8f --- /dev/null +++ b/target/linux/lantiq/patches-4.1/0004-MIPS-lantiq-add-atm-hack.patch @@ -0,0 +1,500 @@ +From 9afadf01b1be371ee88491819aa67364684461f9 Mon Sep 17 00:00:00 2001 +From: John Crispin +Date: Fri, 3 Aug 2012 10:27:25 +0200 +Subject: [PATCH 04/36] MIPS: lantiq: add atm hack + +Signed-off-by: John Crispin +--- + arch/mips/include/asm/mach-lantiq/lantiq_atm.h | 196 +++++++++++++++++++++++ + arch/mips/include/asm/mach-lantiq/lantiq_ptm.h | 203 ++++++++++++++++++++++++ + arch/mips/lantiq/irq.c | 2 + + arch/mips/mm/cache.c | 2 + + include/uapi/linux/atm.h | 6 + + net/atm/common.c | 6 + + net/atm/proc.c | 2 +- + 7 files changed, 416 insertions(+), 1 deletion(-) + create mode 100644 arch/mips/include/asm/mach-lantiq/lantiq_atm.h + create mode 100644 arch/mips/include/asm/mach-lantiq/lantiq_ptm.h + +--- /dev/null ++++ b/arch/mips/include/asm/mach-lantiq/lantiq_atm.h +@@ -0,0 +1,196 @@ ++/****************************************************************************** ++** ++** FILE NAME : ifx_atm.h ++** PROJECT : UEIP ++** MODULES : ATM ++** ++** DATE : 17 Jun 2009 ++** AUTHOR : Xu Liang ++** DESCRIPTION : Global ATM driver header file ++** COPYRIGHT : Copyright (c) 2006 ++** Infineon Technologies AG ++** Am Campeon 1-12, 85579 Neubiberg, Germany ++** ++** This program is free software; you can redistribute it and/or modify ++** it under the terms of the GNU General Public License as published by ++** the Free Software Foundation; either version 2 of the License, or ++** (at your option) any later version. ++** ++** HISTORY ++** $Date $Author $Comment ++** 07 JUL 2009 Xu Liang Init Version ++*******************************************************************************/ ++ ++#ifndef IFX_ATM_H ++#define IFX_ATM_H ++ ++ ++ ++/*! ++ \defgroup IFX_ATM UEIP Project - ATM driver module ++ \brief UEIP Project - ATM driver module, support Danube, Amazon-SE, AR9, VR9. ++ */ ++ ++/*! ++ \defgroup IFX_ATM_IOCTL IOCTL Commands ++ \ingroup IFX_ATM ++ \brief IOCTL Commands used by user application. ++ */ ++ ++/*! ++ \defgroup IFX_ATM_STRUCT Structures ++ \ingroup IFX_ATM ++ \brief Structures used by user application. ++ */ ++ ++/*! ++ \file ifx_atm.h ++ \ingroup IFX_ATM ++ \brief ATM driver header file ++ */ ++ ++ ++ ++/* ++ * #################################### ++ * Definition ++ * #################################### ++ */ ++ ++/*! ++ \addtogroup IFX_ATM_STRUCT ++ */ ++/*@{*/ ++ ++/* ++ * ATM MIB ++ */ ++ ++/*! ++ \struct atm_cell_ifEntry_t ++ \brief Structure used for Cell Level MIB Counters. ++ ++ User application use this structure to call IOCTL command "PPE_ATM_MIB_CELL". ++ */ ++typedef struct { ++ __u32 ifHCInOctets_h; /*!< byte counter of ingress cells (upper 32 bits, total 64 bits) */ ++ __u32 ifHCInOctets_l; /*!< byte counter of ingress cells (lower 32 bits, total 64 bits) */ ++ __u32 ifHCOutOctets_h; /*!< byte counter of egress cells (upper 32 bits, total 64 bits) */ ++ __u32 ifHCOutOctets_l; /*!< byte counter of egress cells (lower 32 bits, total 64 bits) */ ++ __u32 ifInErrors; /*!< counter of error ingress cells */ ++ __u32 ifInUnknownProtos; /*!< counter of unknown ingress cells */ ++ __u32 ifOutErrors; /*!< counter of error egress cells */ ++} atm_cell_ifEntry_t; ++ ++/*! ++ \struct atm_aal5_ifEntry_t ++ \brief Structure used for AAL5 Frame Level MIB Counters. ++ ++ User application use this structure to call IOCTL command "PPE_ATM_MIB_AAL5". ++ */ ++typedef struct { ++ __u32 ifHCInOctets_h; /*!< byte counter of ingress packets (upper 32 bits, total 64 bits) */ ++ __u32 ifHCInOctets_l; /*!< byte counter of ingress packets (lower 32 bits, total 64 bits) */ ++ __u32 ifHCOutOctets_h; /*!< byte counter of egress packets (upper 32 bits, total 64 bits) */ ++ __u32 ifHCOutOctets_l; /*!< byte counter of egress packets (lower 32 bits, total 64 bits) */ ++ __u32 ifInUcastPkts; /*!< counter of ingress packets */ ++ __u32 ifOutUcastPkts; /*!< counter of egress packets */ ++ __u32 ifInErrors; /*!< counter of error ingress packets */ ++ __u32 ifInDiscards; /*!< counter of dropped ingress packets */ ++ __u32 ifOutErros; /*!< counter of error egress packets */ ++ __u32 ifOutDiscards; /*!< counter of dropped egress packets */ ++} atm_aal5_ifEntry_t; ++ ++/*! ++ \struct atm_aal5_vcc_t ++ \brief Structure used for per PVC AAL5 Frame Level MIB Counters. ++ ++ This structure is a part of structure "atm_aal5_vcc_x_t". ++ */ ++typedef struct { ++ __u32 aal5VccCrcErrors; /*!< counter of ingress packets with CRC error */ ++ __u32 aal5VccSarTimeOuts; /*!< counter of ingress packets with Re-assemble timeout */ //no timer support yet ++ __u32 aal5VccOverSizedSDUs; /*!< counter of oversized ingress packets */ ++} atm_aal5_vcc_t; ++ ++/*! ++ \struct atm_aal5_vcc_x_t ++ \brief Structure used for per PVC AAL5 Frame Level MIB Counters. ++ ++ User application use this structure to call IOCTL command "PPE_ATM_MIB_VCC". ++ */ ++typedef struct { ++ int vpi; /*!< VPI of the VCC to get MIB counters */ ++ int vci; /*!< VCI of the VCC to get MIB counters */ ++ atm_aal5_vcc_t mib_vcc; /*!< structure to get MIB counters */ ++} atm_aal5_vcc_x_t; ++ ++/*@}*/ ++ ++ ++ ++/* ++ * #################################### ++ * IOCTL ++ * #################################### ++ */ ++ ++/*! ++ \addtogroup IFX_ATM_IOCTL ++ */ ++/*@{*/ ++ ++/* ++ * ioctl Command ++ */ ++/*! ++ \brief ATM IOCTL Magic Number ++ */ ++#define PPE_ATM_IOC_MAGIC 'o' ++/*! ++ \brief ATM IOCTL Command - Get Cell Level MIB Counters ++ ++ This command is obsolete. User can get cell level MIB from DSL API. ++ This command uses structure "atm_cell_ifEntry_t" as parameter for output of MIB counters. ++ */ ++#define PPE_ATM_MIB_CELL _IOW(PPE_ATM_IOC_MAGIC, 0, atm_cell_ifEntry_t) ++/*! ++ \brief ATM IOCTL Command - Get AAL5 Level MIB Counters ++ ++ Get AAL5 packet counters. ++ This command uses structure "atm_aal5_ifEntry_t" as parameter for output of MIB counters. ++ */ ++#define PPE_ATM_MIB_AAL5 _IOW(PPE_ATM_IOC_MAGIC, 1, atm_aal5_ifEntry_t) ++/*! ++ \brief ATM IOCTL Command - Get Per PVC MIB Counters ++ ++ Get AAL5 packet counters for each PVC. ++ This command uses structure "atm_aal5_vcc_x_t" as parameter for input of VPI/VCI information and output of MIB counters. ++ */ ++#define PPE_ATM_MIB_VCC _IOWR(PPE_ATM_IOC_MAGIC, 2, atm_aal5_vcc_x_t) ++/*! ++ \brief Total Number of ATM IOCTL Commands ++ */ ++#define PPE_ATM_IOC_MAXNR 3 ++ ++/*@}*/ ++ ++ ++ ++/* ++ * #################################### ++ * API ++ * #################################### ++ */ ++ ++#ifdef __KERNEL__ ++struct port_cell_info { ++ unsigned int port_num; ++ unsigned int tx_link_rate[2]; ++}; ++#endif ++ ++ ++ ++#endif // IFX_ATM_H ++ +--- /dev/null ++++ b/arch/mips/include/asm/mach-lantiq/lantiq_ptm.h +@@ -0,0 +1,203 @@ ++/****************************************************************************** ++** ++** FILE NAME : ifx_ptm.h ++** PROJECT : UEIP ++** MODULES : PTM ++** ++** DATE : 17 Jun 2009 ++** AUTHOR : Xu Liang ++** DESCRIPTION : Global PTM driver header file ++** COPYRIGHT : Copyright (c) 2006 ++** Infineon Technologies AG ++** Am Campeon 1-12, 85579 Neubiberg, Germany ++** ++** This program is free software; you can redistribute it and/or modify ++** it under the terms of the GNU General Public License as published by ++** the Free Software Foundation; either version 2 of the License, or ++** (at your option) any later version. ++** ++** HISTORY ++** $Date $Author $Comment ++** 07 JUL 2009 Xu Liang Init Version ++*******************************************************************************/ ++ ++#ifndef IFX_PTM_H ++#define IFX_PTM_H ++ ++ ++ ++/*! ++ \defgroup IFX_PTM UEIP Project - PTM driver module ++ \brief UEIP Project - PTM driver module, support Danube, Amazon-SE, AR9, VR9. ++ */ ++ ++/*! ++ \defgroup IFX_PTM_IOCTL IOCTL Commands ++ \ingroup IFX_PTM ++ \brief IOCTL Commands used by user application. ++ */ ++ ++/*! ++ \defgroup IFX_PTM_STRUCT Structures ++ \ingroup IFX_PTM ++ \brief Structures used by user application. ++ */ ++ ++/*! ++ \file ifx_ptm.h ++ \ingroup IFX_PTM ++ \brief PTM driver header file ++ */ ++ ++ ++ ++/* ++ * #################################### ++ * Definition ++ * #################################### ++ */ ++ ++ ++ ++/* ++ * #################################### ++ * IOCTL ++ * #################################### ++ */ ++ ++/*! ++ \addtogroup IFX_PTM_IOCTL ++ */ ++/*@{*/ ++ ++/* ++ * ioctl Command ++ */ ++/*! ++ \brief PTM IOCTL Command - Get codeword MIB counters. ++ ++ This command uses structure "PTM_CW_IF_ENTRY_T" to get codeword level MIB counters. ++ */ ++#define IFX_PTM_MIB_CW_GET SIOCDEVPRIVATE + 1 ++/*! ++ \brief PTM IOCTL Command - Get packet MIB counters. ++ ++ This command uses structure "PTM_FRAME_MIB_T" to get packet level MIB counters. ++ */ ++#define IFX_PTM_MIB_FRAME_GET SIOCDEVPRIVATE + 2 ++/*! ++ \brief PTM IOCTL Command - Get firmware configuration (CRC). ++ ++ This command uses structure "IFX_PTM_CFG_T" to get firmware configuration (CRC). ++ */ ++#define IFX_PTM_CFG_GET SIOCDEVPRIVATE + 3 ++/*! ++ \brief PTM IOCTL Command - Set firmware configuration (CRC). ++ ++ This command uses structure "IFX_PTM_CFG_T" to set firmware configuration (CRC). ++ */ ++#define IFX_PTM_CFG_SET SIOCDEVPRIVATE + 4 ++/*! ++ \brief PTM IOCTL Command - Program priority value to TX queue mapping. ++ ++ This command uses structure "IFX_PTM_PRIO_Q_MAP_T" to program priority value to TX queue mapping. ++ */ ++#define IFX_PTM_MAP_PKT_PRIO_TO_Q SIOCDEVPRIVATE + 14 ++ ++/*@}*/ ++ ++ ++/*! ++ \addtogroup IFX_PTM_STRUCT ++ */ ++/*@{*/ ++ ++/* ++ * ioctl Data Type ++ */ ++ ++/*! ++ \typedef PTM_CW_IF_ENTRY_T ++ \brief Wrapping of structure "ptm_cw_ifEntry_t". ++ */ ++/*! ++ \struct ptm_cw_ifEntry_t ++ \brief Structure used for CodeWord level MIB counters. ++ */ ++typedef struct ptm_cw_ifEntry_t { ++ uint32_t ifRxNoIdleCodewords; /*!< output, number of ingress user codeword */ ++ uint32_t ifRxIdleCodewords; /*!< output, number of ingress idle codeword */ ++ uint32_t ifRxCodingViolation; /*!< output, number of error ingress codeword */ ++ uint32_t ifTxNoIdleCodewords; /*!< output, number of egress user codeword */ ++ uint32_t ifTxIdleCodewords; /*!< output, number of egress idle codeword */ ++} PTM_CW_IF_ENTRY_T; ++ ++/*! ++ \typedef PTM_FRAME_MIB_T ++ \brief Wrapping of structure "ptm_frame_mib_t". ++ */ ++/*! ++ \struct ptm_frame_mib_t ++ \brief Structure used for packet level MIB counters. ++ */ ++typedef struct ptm_frame_mib_t { ++ uint32_t RxCorrect; /*!< output, number of ingress packet */ ++ uint32_t TC_CrcError; /*!< output, number of egress packet with CRC error */ ++ uint32_t RxDropped; /*!< output, number of dropped ingress packet */ ++ uint32_t TxSend; /*!< output, number of egress packet */ ++} PTM_FRAME_MIB_T; ++ ++/*! ++ \typedef IFX_PTM_CFG_T ++ \brief Wrapping of structure "ptm_cfg_t". ++ */ ++/*! ++ \struct ptm_cfg_t ++ \brief Structure used for ETH/TC CRC configuration. ++ */ ++typedef struct ptm_cfg_t { ++ uint32_t RxEthCrcPresent; /*!< input/output, ingress packet has ETH CRC */ ++ uint32_t RxEthCrcCheck; /*!< input/output, check ETH CRC of ingress packet */ ++ uint32_t RxTcCrcCheck; /*!< input/output, check TC CRC of ingress codeword */ ++ uint32_t RxTcCrcLen; /*!< input/output, length of TC CRC of ingress codeword */ ++ uint32_t TxEthCrcGen; /*!< input/output, generate ETH CRC for egress packet */ ++ uint32_t TxTcCrcGen; /*!< input/output, generate TC CRC for egress codeword */ ++ uint32_t TxTcCrcLen; /*!< input/output, length of TC CRC of egress codeword */ ++} IFX_PTM_CFG_T; ++ ++/*! ++ \typedef IFX_PTM_PRIO_Q_MAP_T ++ \brief Wrapping of structure "ppe_prio_q_map". ++ */ ++/*! ++ \struct ppe_prio_q_map ++ \brief Structure used for Priority Value to TX Queue mapping. ++ */ ++typedef struct ppe_prio_q_map { ++ int pkt_prio; ++ int qid; ++ int vpi; // ignored in eth interface ++ int vci; // ignored in eth interface ++} IFX_PTM_PRIO_Q_MAP_T; ++ ++/*@}*/ ++ ++ ++ ++/* ++ * #################################### ++ * API ++ * #################################### ++ */ ++ ++#ifdef __KERNEL__ ++struct port_cell_info { ++ unsigned int port_num; ++ unsigned int tx_link_rate[2]; ++}; ++#endif ++ ++ ++ ++#endif // IFX_PTM_H ++ +--- a/arch/mips/lantiq/irq.c ++++ b/arch/mips/lantiq/irq.c +@@ -14,6 +14,7 @@ + #include + #include + #include ++#include + + #include + #include +@@ -100,6 +101,7 @@ void ltq_mask_and_ack_irq(struct irq_dat + ltq_icu_w32(im, ltq_icu_r32(im, ier) & ~BIT(offset), ier); + ltq_icu_w32(im, BIT(offset), isr); + } ++EXPORT_SYMBOL(ltq_mask_and_ack_irq); + + static void ltq_ack_irq(struct irq_data *d) + { +--- a/arch/mips/mm/cache.c ++++ b/arch/mips/mm/cache.c +@@ -59,6 +59,8 @@ void (*_dma_cache_wback)(unsigned long s + void (*_dma_cache_inv)(unsigned long start, unsigned long size); + + EXPORT_SYMBOL(_dma_cache_wback_inv); ++EXPORT_SYMBOL(_dma_cache_wback); ++EXPORT_SYMBOL(_dma_cache_inv); + + #endif /* CONFIG_DMA_NONCOHERENT || CONFIG_DMA_MAYBE_COHERENT */ + +--- a/include/uapi/linux/atm.h ++++ b/include/uapi/linux/atm.h +@@ -130,8 +130,14 @@ + #define ATM_ABR 4 + #define ATM_ANYCLASS 5 /* compatible with everything */ + ++#define ATM_VBR_NRT ATM_VBR ++#define ATM_VBR_RT 6 ++#define ATM_UBR_PLUS 7 ++#define ATM_GFR 8 ++ + #define ATM_MAX_PCR -1 /* maximum available PCR */ + ++ + struct atm_trafprm { + unsigned char traffic_class; /* traffic class (ATM_UBR, ...) */ + int max_pcr; /* maximum PCR in cells per second */ +--- a/net/atm/common.c ++++ b/net/atm/common.c +@@ -62,11 +62,17 @@ static void vcc_remove_socket(struct soc + write_unlock_irq(&vcc_sklist_lock); + } + ++struct sk_buff* (*ifx_atm_alloc_tx)(struct atm_vcc *, unsigned int) = NULL; ++EXPORT_SYMBOL(ifx_atm_alloc_tx); ++ + static struct sk_buff *alloc_tx(struct atm_vcc *vcc, unsigned int size) + { + struct sk_buff *skb; + struct sock *sk = sk_atm(vcc); + ++ if (ifx_atm_alloc_tx != NULL) ++ return ifx_atm_alloc_tx(vcc, size); ++ + if (sk_wmem_alloc_get(sk) && !atm_may_send(vcc, size)) { + pr_debug("Sorry: wmem_alloc = %d, size = %d, sndbuf = %d\n", + sk_wmem_alloc_get(sk), size, sk->sk_sndbuf); +--- a/net/atm/proc.c ++++ b/net/atm/proc.c +@@ -154,7 +154,7 @@ static void *vcc_seq_next(struct seq_fil + static void pvc_info(struct seq_file *seq, struct atm_vcc *vcc) + { + static const char *const class_name[] = { +- "off", "UBR", "CBR", "VBR", "ABR"}; ++ "off","UBR","CBR","NTR-VBR","ABR","ANY","RT-VBR","UBR+","GFR"}; + static const char *const aal_name[] = { + "---", "1", "2", "3/4", /* 0- 3 */ + "???", "5", "???", "???", /* 4- 7 */ diff --git a/target/linux/lantiq/patches-4.1/0007-MIPS-lantiq-add-basic-tffs-driver.patch b/target/linux/lantiq/patches-4.1/0007-MIPS-lantiq-add-basic-tffs-driver.patch new file mode 100644 index 0000000000..70813738cc --- /dev/null +++ b/target/linux/lantiq/patches-4.1/0007-MIPS-lantiq-add-basic-tffs-driver.patch @@ -0,0 +1,111 @@ +From d27ec8bb97db0f60d81ab255d51ac4e967362067 Mon Sep 17 00:00:00 2001 +From: John Crispin +Date: Thu, 7 Aug 2014 18:34:19 +0200 +Subject: [PATCH 07/36] MIPS: lantiq: add basic tffs driver + +Signed-off-by: John Crispin +--- + arch/mips/lantiq/xway/Makefile | 2 +- + arch/mips/lantiq/xway/tffs.c | 87 ++++++++++++++++++++++++++++++++++++++++ + 2 files changed, 88 insertions(+), 1 deletion(-) + create mode 100644 arch/mips/lantiq/xway/tffs.c + +--- a/arch/mips/lantiq/xway/Makefile ++++ b/arch/mips/lantiq/xway/Makefile +@@ -1,5 +1,5 @@ + obj-y := prom.o sysctrl.o clk.o reset.o dma.o gptu.o dcdc.o + +-obj-y += vmmc.o ++obj-y += vmmc.o tffs.o + + obj-$(CONFIG_XRX200_PHY_FW) += xrx200_phy_fw.o +--- /dev/null ++++ b/arch/mips/lantiq/xway/tffs.c +@@ -0,0 +1,87 @@ ++#include ++#include ++#include ++#include ++ ++struct tffs_entry { ++ uint16_t id; ++ uint16_t len; ++}; ++ ++static struct tffs_id { ++ uint32_t id; ++ char *name; ++ unsigned char *val; ++ uint32_t offset; ++ uint32_t len; ++} ids[] = { ++ { 0x01A9, "annex" }, ++ { 0x0188, "maca" }, ++ { 0x0189, "macb" }, ++ { 0x018a, "macwlan" }, ++ { 0x0195, "macwlan2" }, ++ { 0x018b, "macdsl" }, ++ { 0x01C2, "webgui_pass" }, ++ { 0x01AB, "wlan_key" }, ++}; ++ ++static struct mtd_info *tffs1, *tffs2; ++ ++static struct tffs_id* tffs_find_id(int id) ++{ ++ int i; ++ ++ for (i = 0; i < ARRAY_SIZE(ids); i++) ++ if (id == ids[i].id) ++ return &ids[i]; ++ ++ return NULL; ++} ++ ++static void tffs_index(void) ++{ ++ struct tffs_entry *E = NULL; ++ struct tffs_entry entry; ++ int ret, retlen; ++ ++ while ((unsigned int) E + sizeof(struct tffs_entry) < tffs2->size) { ++ struct tffs_id *id; ++ int len; ++ ++ ret = mtd_read(tffs2, (unsigned int) E, sizeof(struct tffs_entry), &retlen, (unsigned char *)&entry); ++ if (ret) ++ return; ++ ++ if (entry.id == 0xffff) ++ return; ++ ++ id = tffs_find_id(entry.id); ++ if (id) { ++ id->offset = (uint32_t) E; ++ id->len = entry.len; ++ id->val = kzalloc(entry.len + 1, GFP_KERNEL); ++ mtd_read(tffs2, ((unsigned int) E) + sizeof(struct tffs_entry), entry.len, &retlen, id->val); ++ ++ } ++ //printk(KERN_INFO "found entry at 0x%08X-> [<0x%x> %u bytes]\n", (uint32_t) E, entry.id, entry.len); ++ if (id && id->name) ++ printk(KERN_INFO "found entry name -> %s=%s\n", id->name, id->val); ++ ++ len = (entry.len + 3) & ~0x03; ++ E = (struct tffs_entry *)(((unsigned int)E) + sizeof(struct tffs_entry) + len); ++ } ++} ++ ++static int __init tffs_init(void) ++{ ++ tffs1 = get_mtd_device_nm("tffs (1)"); ++ tffs2 = get_mtd_device_nm("tffs (2)"); ++ if (IS_ERR(tffs1) || IS_ERR(tffs2)) ++ return -1; ++ ++ tffs_index(); ++ ++ return 0; ++} ++late_initcall(tffs_init); ++ diff --git a/target/linux/lantiq/patches-4.1/0008-MIPS-lantiq-backport-old-timer-code.patch b/target/linux/lantiq/patches-4.1/0008-MIPS-lantiq-backport-old-timer-code.patch new file mode 100644 index 0000000000..55255037fa --- /dev/null +++ b/target/linux/lantiq/patches-4.1/0008-MIPS-lantiq-backport-old-timer-code.patch @@ -0,0 +1,1028 @@ +From 94800350cb8d2f29dda2206b5e9a3772024ee168 Mon Sep 17 00:00:00 2001 +From: John Crispin +Date: Thu, 7 Aug 2014 18:30:56 +0200 +Subject: [PATCH 08/36] MIPS: lantiq: backport old timer code + +Signed-off-by: John Crispin +--- + arch/mips/include/asm/mach-lantiq/lantiq_timer.h | 155 ++++ + arch/mips/lantiq/xway/Makefile | 2 +- + arch/mips/lantiq/xway/timer.c | 845 ++++++++++++++++++++++ + 3 files changed, 1001 insertions(+), 1 deletion(-) + create mode 100644 arch/mips/include/asm/mach-lantiq/lantiq_timer.h + create mode 100644 arch/mips/lantiq/xway/timer.c + +--- /dev/null ++++ b/arch/mips/include/asm/mach-lantiq/lantiq_timer.h +@@ -0,0 +1,155 @@ ++#ifndef __DANUBE_GPTU_DEV_H__2005_07_26__10_19__ ++#define __DANUBE_GPTU_DEV_H__2005_07_26__10_19__ ++ ++ ++/****************************************************************************** ++ Copyright (c) 2002, Infineon Technologies. All rights reserved. ++ ++ No Warranty ++ Because the program is licensed free of charge, there is no warranty for ++ the program, to the extent permitted by applicable law. Except when ++ otherwise stated in writing the copyright holders and/or other parties ++ provide the program "as is" without warranty of any kind, either ++ expressed or implied, including, but not limited to, the implied ++ warranties of merchantability and fitness for a particular purpose. The ++ entire risk as to the quality and performance of the program is with ++ you. should the program prove defective, you assume the cost of all ++ necessary servicing, repair or correction. ++ ++ In no event unless required by applicable law or agreed to in writing ++ will any copyright holder, or any other party who may modify and/or ++ redistribute the program as permitted above, be liable to you for ++ damages, including any general, special, incidental or consequential ++ damages arising out of the use or inability to use the program ++ (including but not limited to loss of data or data being rendered ++ inaccurate or losses sustained by you or third parties or a failure of ++ the program to operate with any other programs), even if such holder or ++ other party has been advised of the possibility of such damages. ++******************************************************************************/ ++ ++ ++/* ++ * #################################### ++ * Definition ++ * #################################### ++ */ ++ ++/* ++ * Available Timer/Counter Index ++ */ ++#define TIMER(n, X) (n * 2 + (X ? 1 : 0)) ++#define TIMER_ANY 0x00 ++#define TIMER1A TIMER(1, 0) ++#define TIMER1B TIMER(1, 1) ++#define TIMER2A TIMER(2, 0) ++#define TIMER2B TIMER(2, 1) ++#define TIMER3A TIMER(3, 0) ++#define TIMER3B TIMER(3, 1) ++ ++/* ++ * Flag of Timer/Counter ++ * These flags specify the way in which timer is configured. ++ */ ++/* Bit size of timer/counter. */ ++#define TIMER_FLAG_16BIT 0x0000 ++#define TIMER_FLAG_32BIT 0x0001 ++/* Switch between timer and counter. */ ++#define TIMER_FLAG_TIMER 0x0000 ++#define TIMER_FLAG_COUNTER 0x0002 ++/* Stop or continue when overflowing/underflowing. */ ++#define TIMER_FLAG_ONCE 0x0000 ++#define TIMER_FLAG_CYCLIC 0x0004 ++/* Count up or counter down. */ ++#define TIMER_FLAG_UP 0x0000 ++#define TIMER_FLAG_DOWN 0x0008 ++/* Count on specific level or edge. */ ++#define TIMER_FLAG_HIGH_LEVEL_SENSITIVE 0x0000 ++#define TIMER_FLAG_LOW_LEVEL_SENSITIVE 0x0040 ++#define TIMER_FLAG_RISE_EDGE 0x0010 ++#define TIMER_FLAG_FALL_EDGE 0x0020 ++#define TIMER_FLAG_ANY_EDGE 0x0030 ++/* Signal is syncronous to module clock or not. */ ++#define TIMER_FLAG_UNSYNC 0x0000 ++#define TIMER_FLAG_SYNC 0x0080 ++/* Different interrupt handle type. */ ++#define TIMER_FLAG_NO_HANDLE 0x0000 ++#if defined(__KERNEL__) ++ #define TIMER_FLAG_CALLBACK_IN_IRQ 0x0100 ++#endif // defined(__KERNEL__) ++#define TIMER_FLAG_SIGNAL 0x0300 ++/* Internal clock source or external clock source */ ++#define TIMER_FLAG_INT_SRC 0x0000 ++#define TIMER_FLAG_EXT_SRC 0x1000 ++ ++ ++/* ++ * ioctl Command ++ */ ++#define GPTU_REQUEST_TIMER 0x01 /* General method to setup timer/counter. */ ++#define GPTU_FREE_TIMER 0x02 /* Free timer/counter. */ ++#define GPTU_START_TIMER 0x03 /* Start or resume timer/counter. */ ++#define GPTU_STOP_TIMER 0x04 /* Suspend timer/counter. */ ++#define GPTU_GET_COUNT_VALUE 0x05 /* Get current count value. */ ++#define GPTU_CALCULATE_DIVIDER 0x06 /* Calculate timer divider from given freq.*/ ++#define GPTU_SET_TIMER 0x07 /* Simplified method to setup timer. */ ++#define GPTU_SET_COUNTER 0x08 /* Simplified method to setup counter. */ ++ ++/* ++ * Data Type Used to Call ioctl ++ */ ++struct gptu_ioctl_param { ++ unsigned int timer; /* In command GPTU_REQUEST_TIMER, GPTU_SET_TIMER, and * ++ * GPTU_SET_COUNTER, this field is ID of expected * ++ * timer/counter. If it's zero, a timer/counter would * ++ * be dynamically allocated and ID would be stored in * ++ * this field. * ++ * In command GPTU_GET_COUNT_VALUE, this field is * ++ * ignored. * ++ * In other command, this field is ID of timer/counter * ++ * allocated. */ ++ unsigned int flag; /* In command GPTU_REQUEST_TIMER, GPTU_SET_TIMER, and * ++ * GPTU_SET_COUNTER, this field contains flags to * ++ * specify how to configure timer/counter. * ++ * In command GPTU_START_TIMER, zero indicate start * ++ * and non-zero indicate resume timer/counter. * ++ * In other command, this field is ignored. */ ++ unsigned long value; /* In command GPTU_REQUEST_TIMER, this field contains * ++ * init/reload value. * ++ * In command GPTU_SET_TIMER, this field contains * ++ * frequency (0.001Hz) of timer. * ++ * In command GPTU_GET_COUNT_VALUE, current count * ++ * value would be stored in this field. * ++ * In command GPTU_CALCULATE_DIVIDER, this field * ++ * contains frequency wanted, and after calculation, * ++ * divider would be stored in this field to overwrite * ++ * the frequency. * ++ * In other command, this field is ignored. */ ++ int pid; /* In command GPTU_REQUEST_TIMER and GPTU_SET_TIMER, * ++ * if signal is required, this field contains process * ++ * ID to which signal would be sent. * ++ * In other command, this field is ignored. */ ++ int sig; /* In command GPTU_REQUEST_TIMER and GPTU_SET_TIMER, * ++ * if signal is required, this field contains signal * ++ * number which would be sent. * ++ * In other command, this field is ignored. */ ++}; ++ ++/* ++ * #################################### ++ * Data Type ++ * #################################### ++ */ ++typedef void (*timer_callback)(unsigned long arg); ++ ++extern int lq_request_timer(unsigned int, unsigned int, unsigned long, unsigned long, unsigned long); ++extern int lq_free_timer(unsigned int); ++extern int lq_start_timer(unsigned int, int); ++extern int lq_stop_timer(unsigned int); ++extern int lq_reset_counter_flags(u32 timer, u32 flags); ++extern int lq_get_count_value(unsigned int, unsigned long *); ++extern u32 lq_cal_divider(unsigned long); ++extern int lq_set_timer(unsigned int, unsigned int, int, int, unsigned int, unsigned long, unsigned long); ++extern int lq_set_counter(unsigned int timer, unsigned int flag, ++ u32 reload, unsigned long arg1, unsigned long arg2); ++ ++#endif /* __DANUBE_GPTU_DEV_H__2005_07_26__10_19__ */ +--- a/arch/mips/lantiq/xway/Makefile ++++ b/arch/mips/lantiq/xway/Makefile +@@ -1,4 +1,4 @@ +-obj-y := prom.o sysctrl.o clk.o reset.o dma.o gptu.o dcdc.o ++obj-y := prom.o sysctrl.o clk.o reset.o dma.o timer.o dcdc.o + + obj-y += vmmc.o tffs.o + +--- /dev/null ++++ b/arch/mips/lantiq/xway/timer.c +@@ -0,0 +1,845 @@ ++#ifndef CONFIG_SOC_AMAZON_SE ++ ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++ ++#include ++#include ++#include "../clk.h" ++ ++#include ++#include ++#include ++ ++#define MAX_NUM_OF_32BIT_TIMER_BLOCKS 6 ++ ++#ifdef TIMER1A ++#define FIRST_TIMER TIMER1A ++#else ++#define FIRST_TIMER 2 ++#endif ++ ++/* ++ * GPTC divider is set or not. ++ */ ++#define GPTU_CLC_RMC_IS_SET 0 ++ ++/* ++ * Timer Interrupt (IRQ) ++ */ ++/* Must be adjusted when ICU driver is available */ ++#define TIMER_INTERRUPT (INT_NUM_IM3_IRL0 + 22) ++ ++/* ++ * Bits Operation ++ */ ++#define GET_BITS(x, msb, lsb) \ ++ (((x) & ((1 << ((msb) + 1)) - 1)) >> (lsb)) ++#define SET_BITS(x, msb, lsb, value) \ ++ (((x) & ~(((1 << ((msb) + 1)) - 1) ^ ((1 << (lsb)) - 1))) | \ ++ (((value) & ((1 << (1 + (msb) - (lsb))) - 1)) << (lsb))) ++ ++/* ++ * GPTU Register Mapping ++ */ ++#define LQ_GPTU (KSEG1 + 0x1E100A00) ++#define LQ_GPTU_CLC ((volatile u32 *)(LQ_GPTU + 0x0000)) ++#define LQ_GPTU_ID ((volatile u32 *)(LQ_GPTU + 0x0008)) ++#define LQ_GPTU_CON(n, X) ((volatile u32 *)(LQ_GPTU + 0x0010 + ((X) * 4) + ((n) - 1) * 0x0020)) /* X must be either A or B */ ++#define LQ_GPTU_RUN(n, X) ((volatile u32 *)(LQ_GPTU + 0x0018 + ((X) * 4) + ((n) - 1) * 0x0020)) /* X must be either A or B */ ++#define LQ_GPTU_RELOAD(n, X) ((volatile u32 *)(LQ_GPTU + 0x0020 + ((X) * 4) + ((n) - 1) * 0x0020)) /* X must be either A or B */ ++#define LQ_GPTU_COUNT(n, X) ((volatile u32 *)(LQ_GPTU + 0x0028 + ((X) * 4) + ((n) - 1) * 0x0020)) /* X must be either A or B */ ++#define LQ_GPTU_IRNEN ((volatile u32 *)(LQ_GPTU + 0x00F4)) ++#define LQ_GPTU_IRNICR ((volatile u32 *)(LQ_GPTU + 0x00F8)) ++#define LQ_GPTU_IRNCR ((volatile u32 *)(LQ_GPTU + 0x00FC)) ++ ++/* ++ * Clock Control Register ++ */ ++#define GPTU_CLC_SMC GET_BITS(*LQ_GPTU_CLC, 23, 16) ++#define GPTU_CLC_RMC GET_BITS(*LQ_GPTU_CLC, 15, 8) ++#define GPTU_CLC_FSOE (*LQ_GPTU_CLC & (1 << 5)) ++#define GPTU_CLC_EDIS (*LQ_GPTU_CLC & (1 << 3)) ++#define GPTU_CLC_SPEN (*LQ_GPTU_CLC & (1 << 2)) ++#define GPTU_CLC_DISS (*LQ_GPTU_CLC & (1 << 1)) ++#define GPTU_CLC_DISR (*LQ_GPTU_CLC & (1 << 0)) ++ ++#define GPTU_CLC_SMC_SET(value) SET_BITS(0, 23, 16, (value)) ++#define GPTU_CLC_RMC_SET(value) SET_BITS(0, 15, 8, (value)) ++#define GPTU_CLC_FSOE_SET(value) ((value) ? (1 << 5) : 0) ++#define GPTU_CLC_SBWE_SET(value) ((value) ? (1 << 4) : 0) ++#define GPTU_CLC_EDIS_SET(value) ((value) ? (1 << 3) : 0) ++#define GPTU_CLC_SPEN_SET(value) ((value) ? (1 << 2) : 0) ++#define GPTU_CLC_DISR_SET(value) ((value) ? (1 << 0) : 0) ++ ++/* ++ * ID Register ++ */ ++#define GPTU_ID_ID GET_BITS(*LQ_GPTU_ID, 15, 8) ++#define GPTU_ID_CFG GET_BITS(*LQ_GPTU_ID, 7, 5) ++#define GPTU_ID_REV GET_BITS(*LQ_GPTU_ID, 4, 0) ++ ++/* ++ * Control Register of Timer/Counter nX ++ * n is the index of block (1 based index) ++ * X is either A or B ++ */ ++#define GPTU_CON_SRC_EG(n, X) (*LQ_GPTU_CON(n, X) & (1 << 10)) ++#define GPTU_CON_SRC_EXT(n, X) (*LQ_GPTU_CON(n, X) & (1 << 9)) ++#define GPTU_CON_SYNC(n, X) (*LQ_GPTU_CON(n, X) & (1 << 8)) ++#define GPTU_CON_EDGE(n, X) GET_BITS(*LQ_GPTU_CON(n, X), 7, 6) ++#define GPTU_CON_INV(n, X) (*LQ_GPTU_CON(n, X) & (1 << 5)) ++#define GPTU_CON_EXT(n, X) (*LQ_GPTU_CON(n, A) & (1 << 4)) /* Timer/Counter B does not have this bit */ ++#define GPTU_CON_STP(n, X) (*LQ_GPTU_CON(n, X) & (1 << 3)) ++#define GPTU_CON_CNT(n, X) (*LQ_GPTU_CON(n, X) & (1 << 2)) ++#define GPTU_CON_DIR(n, X) (*LQ_GPTU_CON(n, X) & (1 << 1)) ++#define GPTU_CON_EN(n, X) (*LQ_GPTU_CON(n, X) & (1 << 0)) ++ ++#define GPTU_CON_SRC_EG_SET(value) ((value) ? 0 : (1 << 10)) ++#define GPTU_CON_SRC_EXT_SET(value) ((value) ? (1 << 9) : 0) ++#define GPTU_CON_SYNC_SET(value) ((value) ? (1 << 8) : 0) ++#define GPTU_CON_EDGE_SET(value) SET_BITS(0, 7, 6, (value)) ++#define GPTU_CON_INV_SET(value) ((value) ? (1 << 5) : 0) ++#define GPTU_CON_EXT_SET(value) ((value) ? (1 << 4) : 0) ++#define GPTU_CON_STP_SET(value) ((value) ? (1 << 3) : 0) ++#define GPTU_CON_CNT_SET(value) ((value) ? (1 << 2) : 0) ++#define GPTU_CON_DIR_SET(value) ((value) ? (1 << 1) : 0) ++ ++#define GPTU_RUN_RL_SET(value) ((value) ? (1 << 2) : 0) ++#define GPTU_RUN_CEN_SET(value) ((value) ? (1 << 1) : 0) ++#define GPTU_RUN_SEN_SET(value) ((value) ? (1 << 0) : 0) ++ ++#define GPTU_IRNEN_TC_SET(n, X, value) ((value) ? (1 << (((n) - 1) * 2 + (X))) : 0) ++#define GPTU_IRNCR_TC_SET(n, X, value) ((value) ? (1 << (((n) - 1) * 2 + (X))) : 0) ++ ++#define TIMER_FLAG_MASK_SIZE(x) (x & 0x0001) ++#define TIMER_FLAG_MASK_TYPE(x) (x & 0x0002) ++#define TIMER_FLAG_MASK_STOP(x) (x & 0x0004) ++#define TIMER_FLAG_MASK_DIR(x) (x & 0x0008) ++#define TIMER_FLAG_NONE_EDGE 0x0000 ++#define TIMER_FLAG_MASK_EDGE(x) (x & 0x0030) ++#define TIMER_FLAG_REAL 0x0000 ++#define TIMER_FLAG_INVERT 0x0040 ++#define TIMER_FLAG_MASK_INVERT(x) (x & 0x0040) ++#define TIMER_FLAG_MASK_TRIGGER(x) (x & 0x0070) ++#define TIMER_FLAG_MASK_SYNC(x) (x & 0x0080) ++#define TIMER_FLAG_CALLBACK_IN_HB 0x0200 ++#define TIMER_FLAG_MASK_HANDLE(x) (x & 0x0300) ++#define TIMER_FLAG_MASK_SRC(x) (x & 0x1000) ++ ++struct timer_dev_timer { ++ unsigned int f_irq_on; ++ unsigned int irq; ++ unsigned int flag; ++ unsigned long arg1; ++ unsigned long arg2; ++}; ++ ++struct timer_dev { ++ struct mutex gptu_mutex; ++ unsigned int number_of_timers; ++ unsigned int occupation; ++ unsigned int f_gptu_on; ++ struct timer_dev_timer timer[MAX_NUM_OF_32BIT_TIMER_BLOCKS * 2]; ++}; ++ ++ ++unsigned int ltq_get_fpi_bus_clock(int fpi) { ++ struct clk *clk = clk_get_fpi(); ++ return clk_get_rate(clk); ++} ++ ++ ++static long gptu_ioctl(struct file *, unsigned int, unsigned long); ++static int gptu_open(struct inode *, struct file *); ++static int gptu_release(struct inode *, struct file *); ++ ++static struct file_operations gptu_fops = { ++ .owner = THIS_MODULE, ++ .unlocked_ioctl = gptu_ioctl, ++ .open = gptu_open, ++ .release = gptu_release ++}; ++ ++static struct miscdevice gptu_miscdev = { ++ .minor = MISC_DYNAMIC_MINOR, ++ .name = "gptu", ++ .fops = &gptu_fops, ++}; ++ ++static struct timer_dev timer_dev; ++ ++static irqreturn_t timer_irq_handler(int irq, void *p) ++{ ++ unsigned int timer; ++ unsigned int flag; ++ struct timer_dev_timer *dev_timer = (struct timer_dev_timer *)p; ++ ++ timer = irq - TIMER_INTERRUPT; ++ if (timer < timer_dev.number_of_timers ++ && dev_timer == &timer_dev.timer[timer]) { ++ /* Clear interrupt. */ ++ ltq_w32(1 << timer, LQ_GPTU_IRNCR); ++ ++ /* Call user hanler or signal. */ ++ flag = dev_timer->flag; ++ if (!(timer & 0x01) ++ || TIMER_FLAG_MASK_SIZE(flag) == TIMER_FLAG_16BIT) { ++ /* 16-bit timer or timer A of 32-bit timer */ ++ switch (TIMER_FLAG_MASK_HANDLE(flag)) { ++ case TIMER_FLAG_CALLBACK_IN_IRQ: ++ case TIMER_FLAG_CALLBACK_IN_HB: ++ if (dev_timer->arg1) ++ (*(timer_callback)dev_timer->arg1)(dev_timer->arg2); ++ break; ++ case TIMER_FLAG_SIGNAL: ++ send_sig((int)dev_timer->arg2, (struct task_struct *)dev_timer->arg1, 0); ++ break; ++ } ++ } ++ } ++ return IRQ_HANDLED; ++} ++ ++static inline void lq_enable_gptu(void) ++{ ++ struct clk *clk = clk_get_sys("1e100a00.gptu", NULL); ++ clk_enable(clk); ++ ++ //ltq_pmu_enable(PMU_GPT); ++ ++ /* Set divider as 1, disable write protection for SPEN, enable module. */ ++ *LQ_GPTU_CLC = ++ GPTU_CLC_SMC_SET(0x00) | ++ GPTU_CLC_RMC_SET(0x01) | ++ GPTU_CLC_FSOE_SET(0) | ++ GPTU_CLC_SBWE_SET(1) | ++ GPTU_CLC_EDIS_SET(0) | ++ GPTU_CLC_SPEN_SET(0) | ++ GPTU_CLC_DISR_SET(0); ++} ++ ++static inline void lq_disable_gptu(void) ++{ ++ struct clk *clk = clk_get_sys("1e100a00.gptu", NULL); ++ ltq_w32(0x00, LQ_GPTU_IRNEN); ++ ltq_w32(0xfff, LQ_GPTU_IRNCR); ++ ++ /* Set divider as 0, enable write protection for SPEN, disable module. */ ++ *LQ_GPTU_CLC = ++ GPTU_CLC_SMC_SET(0x00) | ++ GPTU_CLC_RMC_SET(0x00) | ++ GPTU_CLC_FSOE_SET(0) | ++ GPTU_CLC_SBWE_SET(0) | ++ GPTU_CLC_EDIS_SET(0) | ++ GPTU_CLC_SPEN_SET(0) | ++ GPTU_CLC_DISR_SET(1); ++ ++ clk_enable(clk); ++} ++ ++int lq_request_timer(unsigned int timer, unsigned int flag, ++ unsigned long value, unsigned long arg1, unsigned long arg2) ++{ ++ int ret = 0; ++ unsigned int con_reg, irnen_reg; ++ int n, X; ++ ++ if (timer >= FIRST_TIMER + timer_dev.number_of_timers) ++ return -EINVAL; ++ ++ printk(KERN_INFO "request_timer(%d, 0x%08X, %lu)...", ++ timer, flag, value); ++ ++ if (TIMER_FLAG_MASK_SIZE(flag) == TIMER_FLAG_16BIT) ++ value &= 0xFFFF; ++ else ++ timer &= ~0x01; ++ ++ mutex_lock(&timer_dev.gptu_mutex); ++ ++ /* ++ * Allocate timer. ++ */ ++ if (timer < FIRST_TIMER) { ++ unsigned int mask; ++ unsigned int shift; ++ /* This takes care of TIMER1B which is the only choice for Voice TAPI system */ ++ unsigned int offset = TIMER2A; ++ ++ /* ++ * Pick up a free timer. ++ */ ++ if (TIMER_FLAG_MASK_SIZE(flag) == TIMER_FLAG_16BIT) { ++ mask = 1 << offset; ++ shift = 1; ++ } else { ++ mask = 3 << offset; ++ shift = 2; ++ } ++ for (timer = offset; ++ timer < offset + timer_dev.number_of_timers; ++ timer += shift, mask <<= shift) ++ if (!(timer_dev.occupation & mask)) { ++ timer_dev.occupation |= mask; ++ break; ++ } ++ if (timer >= offset + timer_dev.number_of_timers) { ++ printk("failed![%d]\n", __LINE__); ++ mutex_unlock(&timer_dev.gptu_mutex); ++ return -EINVAL; ++ } else ++ ret = timer; ++ } else { ++ register unsigned int mask; ++ ++ /* ++ * Check if the requested timer is free. ++ */ ++ mask = (TIMER_FLAG_MASK_SIZE(flag) == TIMER_FLAG_16BIT ? 1 : 3) << timer; ++ if ((timer_dev.occupation & mask)) { ++ printk("failed![%d] mask %#x, timer_dev.occupation %#x\n", ++ __LINE__, mask, timer_dev.occupation); ++ mutex_unlock(&timer_dev.gptu_mutex); ++ return -EBUSY; ++ } else { ++ timer_dev.occupation |= mask; ++ ret = 0; ++ } ++ } ++ ++ /* ++ * Prepare control register value. ++ */ ++ switch (TIMER_FLAG_MASK_EDGE(flag)) { ++ default: ++ case TIMER_FLAG_NONE_EDGE: ++ con_reg = GPTU_CON_EDGE_SET(0x00); ++ break; ++ case TIMER_FLAG_RISE_EDGE: ++ con_reg = GPTU_CON_EDGE_SET(0x01); ++ break; ++ case TIMER_FLAG_FALL_EDGE: ++ con_reg = GPTU_CON_EDGE_SET(0x02); ++ break; ++ case TIMER_FLAG_ANY_EDGE: ++ con_reg = GPTU_CON_EDGE_SET(0x03); ++ break; ++ } ++ if (TIMER_FLAG_MASK_TYPE(flag) == TIMER_FLAG_TIMER) ++ con_reg |= ++ TIMER_FLAG_MASK_SRC(flag) == ++ TIMER_FLAG_EXT_SRC ? GPTU_CON_SRC_EXT_SET(1) : ++ GPTU_CON_SRC_EXT_SET(0); ++ else ++ con_reg |= ++ TIMER_FLAG_MASK_SRC(flag) == ++ TIMER_FLAG_EXT_SRC ? GPTU_CON_SRC_EG_SET(1) : ++ GPTU_CON_SRC_EG_SET(0); ++ con_reg |= ++ TIMER_FLAG_MASK_SYNC(flag) == ++ TIMER_FLAG_UNSYNC ? GPTU_CON_SYNC_SET(0) : ++ GPTU_CON_SYNC_SET(1); ++ con_reg |= ++ TIMER_FLAG_MASK_INVERT(flag) == ++ TIMER_FLAG_REAL ? GPTU_CON_INV_SET(0) : GPTU_CON_INV_SET(1); ++ con_reg |= ++ TIMER_FLAG_MASK_SIZE(flag) == ++ TIMER_FLAG_16BIT ? GPTU_CON_EXT_SET(0) : ++ GPTU_CON_EXT_SET(1); ++ con_reg |= ++ TIMER_FLAG_MASK_STOP(flag) == ++ TIMER_FLAG_ONCE ? GPTU_CON_STP_SET(1) : GPTU_CON_STP_SET(0); ++ con_reg |= ++ TIMER_FLAG_MASK_TYPE(flag) == ++ TIMER_FLAG_TIMER ? GPTU_CON_CNT_SET(0) : ++ GPTU_CON_CNT_SET(1); ++ con_reg |= ++ TIMER_FLAG_MASK_DIR(flag) == ++ TIMER_FLAG_UP ? GPTU_CON_DIR_SET(1) : GPTU_CON_DIR_SET(0); ++ ++ /* ++ * Fill up running data. ++ */ ++ timer_dev.timer[timer - FIRST_TIMER].flag = flag; ++ timer_dev.timer[timer - FIRST_TIMER].arg1 = arg1; ++ timer_dev.timer[timer - FIRST_TIMER].arg2 = arg2; ++ if (TIMER_FLAG_MASK_SIZE(flag) != TIMER_FLAG_16BIT) ++ timer_dev.timer[timer - FIRST_TIMER + 1].flag = flag; ++ ++ /* ++ * Enable GPTU module. ++ */ ++ if (!timer_dev.f_gptu_on) { ++ lq_enable_gptu(); ++ timer_dev.f_gptu_on = 1; ++ } ++ ++ /* ++ * Enable IRQ. ++ */ ++ if (TIMER_FLAG_MASK_HANDLE(flag) != TIMER_FLAG_NO_HANDLE) { ++ if (TIMER_FLAG_MASK_HANDLE(flag) == TIMER_FLAG_SIGNAL) ++ timer_dev.timer[timer - FIRST_TIMER].arg1 = ++ (unsigned long) find_task_by_vpid((int) arg1); ++ ++ irnen_reg = 1 << (timer - FIRST_TIMER); ++ ++ if (TIMER_FLAG_MASK_HANDLE(flag) == TIMER_FLAG_SIGNAL ++ || (TIMER_FLAG_MASK_HANDLE(flag) == ++ TIMER_FLAG_CALLBACK_IN_IRQ ++ && timer_dev.timer[timer - FIRST_TIMER].arg1)) { ++ enable_irq(timer_dev.timer[timer - FIRST_TIMER].irq); ++ timer_dev.timer[timer - FIRST_TIMER].f_irq_on = 1; ++ } ++ } else ++ irnen_reg = 0; ++ ++ /* ++ * Write config register, reload value and enable interrupt. ++ */ ++ n = timer >> 1; ++ X = timer & 0x01; ++ *LQ_GPTU_CON(n, X) = con_reg; ++ *LQ_GPTU_RELOAD(n, X) = value; ++ /* printk("reload value = %d\n", (u32)value); */ ++ *LQ_GPTU_IRNEN |= irnen_reg; ++ ++ mutex_unlock(&timer_dev.gptu_mutex); ++ printk("successful!\n"); ++ return ret; ++} ++EXPORT_SYMBOL(lq_request_timer); ++ ++int lq_free_timer(unsigned int timer) ++{ ++ unsigned int flag; ++ unsigned int mask; ++ int n, X; ++ ++ if (!timer_dev.f_gptu_on) ++ return -EINVAL; ++ ++ if (timer < FIRST_TIMER || timer >= FIRST_TIMER + timer_dev.number_of_timers) ++ return -EINVAL; ++ ++ mutex_lock(&timer_dev.gptu_mutex); ++ ++ flag = timer_dev.timer[timer - FIRST_TIMER].flag; ++ if (TIMER_FLAG_MASK_SIZE(flag) != TIMER_FLAG_16BIT) ++ timer &= ~0x01; ++ ++ mask = (TIMER_FLAG_MASK_SIZE(flag) == TIMER_FLAG_16BIT ? 1 : 3) << timer; ++ if (((timer_dev.occupation & mask) ^ mask)) { ++ mutex_unlock(&timer_dev.gptu_mutex); ++ return -EINVAL; ++ } ++ ++ n = timer >> 1; ++ X = timer & 0x01; ++ ++ if (GPTU_CON_EN(n, X)) ++ *LQ_GPTU_RUN(n, X) = GPTU_RUN_CEN_SET(1); ++ ++ *LQ_GPTU_IRNEN &= ~GPTU_IRNEN_TC_SET(n, X, 1); ++ *LQ_GPTU_IRNCR |= GPTU_IRNCR_TC_SET(n, X, 1); ++ ++ if (timer_dev.timer[timer - FIRST_TIMER].f_irq_on) { ++ disable_irq(timer_dev.timer[timer - FIRST_TIMER].irq); ++ timer_dev.timer[timer - FIRST_TIMER].f_irq_on = 0; ++ } ++ ++ timer_dev.occupation &= ~mask; ++ if (!timer_dev.occupation && timer_dev.f_gptu_on) { ++ lq_disable_gptu(); ++ timer_dev.f_gptu_on = 0; ++ } ++ ++ mutex_unlock(&timer_dev.gptu_mutex); ++ ++ return 0; ++} ++EXPORT_SYMBOL(lq_free_timer); ++ ++int lq_start_timer(unsigned int timer, int is_resume) ++{ ++ unsigned int flag; ++ unsigned int mask; ++ int n, X; ++ ++ if (!timer_dev.f_gptu_on) ++ return -EINVAL; ++ ++ if (timer < FIRST_TIMER || timer >= FIRST_TIMER + timer_dev.number_of_timers) ++ return -EINVAL; ++ ++ mutex_lock(&timer_dev.gptu_mutex); ++ ++ flag = timer_dev.timer[timer - FIRST_TIMER].flag; ++ if (TIMER_FLAG_MASK_SIZE(flag) != TIMER_FLAG_16BIT) ++ timer &= ~0x01; ++ ++ mask = (TIMER_FLAG_MASK_SIZE(flag) == ++ TIMER_FLAG_16BIT ? 1 : 3) << timer; ++ if (((timer_dev.occupation & mask) ^ mask)) { ++ mutex_unlock(&timer_dev.gptu_mutex); ++ return -EINVAL; ++ } ++ ++ n = timer >> 1; ++ X = timer & 0x01; ++ ++ *LQ_GPTU_RUN(n, X) = GPTU_RUN_RL_SET(!is_resume) | GPTU_RUN_SEN_SET(1); ++ ++ ++ mutex_unlock(&timer_dev.gptu_mutex); ++ ++ return 0; ++} ++EXPORT_SYMBOL(lq_start_timer); ++ ++int lq_stop_timer(unsigned int timer) ++{ ++ unsigned int flag; ++ unsigned int mask; ++ int n, X; ++ ++ if (!timer_dev.f_gptu_on) ++ return -EINVAL; ++ ++ if (timer < FIRST_TIMER ++ || timer >= FIRST_TIMER + timer_dev.number_of_timers) ++ return -EINVAL; ++ ++ mutex_lock(&timer_dev.gptu_mutex); ++ ++ flag = timer_dev.timer[timer - FIRST_TIMER].flag; ++ if (TIMER_FLAG_MASK_SIZE(flag) != TIMER_FLAG_16BIT) ++ timer &= ~0x01; ++ ++ mask = (TIMER_FLAG_MASK_SIZE(flag) == TIMER_FLAG_16BIT ? 1 : 3) << timer; ++ if (((timer_dev.occupation & mask) ^ mask)) { ++ mutex_unlock(&timer_dev.gptu_mutex); ++ return -EINVAL; ++ } ++ ++ n = timer >> 1; ++ X = timer & 0x01; ++ ++ *LQ_GPTU_RUN(n, X) = GPTU_RUN_CEN_SET(1); ++ ++ mutex_unlock(&timer_dev.gptu_mutex); ++ ++ return 0; ++} ++EXPORT_SYMBOL(lq_stop_timer); ++ ++int lq_reset_counter_flags(u32 timer, u32 flags) ++{ ++ unsigned int oflag; ++ unsigned int mask, con_reg; ++ int n, X; ++ ++ if (!timer_dev.f_gptu_on) ++ return -EINVAL; ++ ++ if (timer < FIRST_TIMER || timer >= FIRST_TIMER + timer_dev.number_of_timers) ++ return -EINVAL; ++ ++ mutex_lock(&timer_dev.gptu_mutex); ++ ++ oflag = timer_dev.timer[timer - FIRST_TIMER].flag; ++ if (TIMER_FLAG_MASK_SIZE(oflag) != TIMER_FLAG_16BIT) ++ timer &= ~0x01; ++ ++ mask = (TIMER_FLAG_MASK_SIZE(oflag) == TIMER_FLAG_16BIT ? 1 : 3) << timer; ++ if (((timer_dev.occupation & mask) ^ mask)) { ++ mutex_unlock(&timer_dev.gptu_mutex); ++ return -EINVAL; ++ } ++ ++ switch (TIMER_FLAG_MASK_EDGE(flags)) { ++ default: ++ case TIMER_FLAG_NONE_EDGE: ++ con_reg = GPTU_CON_EDGE_SET(0x00); ++ break; ++ case TIMER_FLAG_RISE_EDGE: ++ con_reg = GPTU_CON_EDGE_SET(0x01); ++ break; ++ case TIMER_FLAG_FALL_EDGE: ++ con_reg = GPTU_CON_EDGE_SET(0x02); ++ break; ++ case TIMER_FLAG_ANY_EDGE: ++ con_reg = GPTU_CON_EDGE_SET(0x03); ++ break; ++ } ++ if (TIMER_FLAG_MASK_TYPE(flags) == TIMER_FLAG_TIMER) ++ con_reg |= TIMER_FLAG_MASK_SRC(flags) == TIMER_FLAG_EXT_SRC ? GPTU_CON_SRC_EXT_SET(1) : GPTU_CON_SRC_EXT_SET(0); ++ else ++ con_reg |= TIMER_FLAG_MASK_SRC(flags) == TIMER_FLAG_EXT_SRC ? GPTU_CON_SRC_EG_SET(1) : GPTU_CON_SRC_EG_SET(0); ++ con_reg |= TIMER_FLAG_MASK_SYNC(flags) == TIMER_FLAG_UNSYNC ? GPTU_CON_SYNC_SET(0) : GPTU_CON_SYNC_SET(1); ++ con_reg |= TIMER_FLAG_MASK_INVERT(flags) == TIMER_FLAG_REAL ? GPTU_CON_INV_SET(0) : GPTU_CON_INV_SET(1); ++ con_reg |= TIMER_FLAG_MASK_SIZE(flags) == TIMER_FLAG_16BIT ? GPTU_CON_EXT_SET(0) : GPTU_CON_EXT_SET(1); ++ con_reg |= TIMER_FLAG_MASK_STOP(flags) == TIMER_FLAG_ONCE ? GPTU_CON_STP_SET(1) : GPTU_CON_STP_SET(0); ++ con_reg |= TIMER_FLAG_MASK_TYPE(flags) == TIMER_FLAG_TIMER ? GPTU_CON_CNT_SET(0) : GPTU_CON_CNT_SET(1); ++ con_reg |= TIMER_FLAG_MASK_DIR(flags) == TIMER_FLAG_UP ? GPTU_CON_DIR_SET(1) : GPTU_CON_DIR_SET(0); ++ ++ timer_dev.timer[timer - FIRST_TIMER].flag = flags; ++ if (TIMER_FLAG_MASK_SIZE(flags) != TIMER_FLAG_16BIT) ++ timer_dev.timer[timer - FIRST_TIMER + 1].flag = flags; ++ ++ n = timer >> 1; ++ X = timer & 0x01; ++ ++ *LQ_GPTU_CON(n, X) = con_reg; ++ smp_wmb(); ++ mutex_unlock(&timer_dev.gptu_mutex); ++ return 0; ++} ++EXPORT_SYMBOL(lq_reset_counter_flags); ++ ++int lq_get_count_value(unsigned int timer, unsigned long *value) ++{ ++ unsigned int flag; ++ unsigned int mask; ++ int n, X; ++ ++ if (!timer_dev.f_gptu_on) ++ return -EINVAL; ++ ++ if (timer < FIRST_TIMER ++ || timer >= FIRST_TIMER + timer_dev.number_of_timers) ++ return -EINVAL; ++ ++ mutex_lock(&timer_dev.gptu_mutex); ++ ++ flag = timer_dev.timer[timer - FIRST_TIMER].flag; ++ if (TIMER_FLAG_MASK_SIZE(flag) != TIMER_FLAG_16BIT) ++ timer &= ~0x01; ++ ++ mask = (TIMER_FLAG_MASK_SIZE(flag) == TIMER_FLAG_16BIT ? 1 : 3) << timer; ++ if (((timer_dev.occupation & mask) ^ mask)) { ++ mutex_unlock(&timer_dev.gptu_mutex); ++ return -EINVAL; ++ } ++ ++ n = timer >> 1; ++ X = timer & 0x01; ++ ++ *value = *LQ_GPTU_COUNT(n, X); ++ ++ ++ mutex_unlock(&timer_dev.gptu_mutex); ++ ++ return 0; ++} ++EXPORT_SYMBOL(lq_get_count_value); ++ ++u32 lq_cal_divider(unsigned long freq) ++{ ++ u64 module_freq, fpi = ltq_get_fpi_bus_clock(2); ++ u32 clock_divider = 1; ++ module_freq = fpi * 1000; ++ do_div(module_freq, clock_divider * freq); ++ return module_freq; ++} ++EXPORT_SYMBOL(lq_cal_divider); ++ ++int lq_set_timer(unsigned int timer, unsigned int freq, int is_cyclic, ++ int is_ext_src, unsigned int handle_flag, unsigned long arg1, ++ unsigned long arg2) ++{ ++ unsigned long divider; ++ unsigned int flag; ++ ++ divider = lq_cal_divider(freq); ++ if (divider == 0) ++ return -EINVAL; ++ flag = ((divider & ~0xFFFF) ? TIMER_FLAG_32BIT : TIMER_FLAG_16BIT) ++ | (is_cyclic ? TIMER_FLAG_CYCLIC : TIMER_FLAG_ONCE) ++ | (is_ext_src ? TIMER_FLAG_EXT_SRC : TIMER_FLAG_INT_SRC) ++ | TIMER_FLAG_TIMER | TIMER_FLAG_DOWN ++ | TIMER_FLAG_MASK_HANDLE(handle_flag); ++ ++ printk(KERN_INFO "lq_set_timer(%d, %d), divider = %lu\n", ++ timer, freq, divider); ++ return lq_request_timer(timer, flag, divider, arg1, arg2); ++} ++EXPORT_SYMBOL(lq_set_timer); ++ ++int lq_set_counter(unsigned int timer, unsigned int flag, u32 reload, ++ unsigned long arg1, unsigned long arg2) ++{ ++ printk(KERN_INFO "lq_set_counter(%d, %#x, %d)\n", timer, flag, reload); ++ return lq_request_timer(timer, flag, reload, arg1, arg2); ++} ++EXPORT_SYMBOL(lq_set_counter); ++ ++static long gptu_ioctl(struct file *file, unsigned int cmd, ++ unsigned long arg) ++{ ++ int ret; ++ struct gptu_ioctl_param param; ++ ++ if (!access_ok(VERIFY_READ, arg, sizeof(struct gptu_ioctl_param))) ++ return -EFAULT; ++ copy_from_user(¶m, (void *) arg, sizeof(param)); ++ ++ if ((((cmd == GPTU_REQUEST_TIMER || cmd == GPTU_SET_TIMER ++ || GPTU_SET_COUNTER) && param.timer < 2) ++ || cmd == GPTU_GET_COUNT_VALUE || cmd == GPTU_CALCULATE_DIVIDER) ++ && !access_ok(VERIFY_WRITE, arg, ++ sizeof(struct gptu_ioctl_param))) ++ return -EFAULT; ++ ++ switch (cmd) { ++ case GPTU_REQUEST_TIMER: ++ ret = lq_request_timer(param.timer, param.flag, param.value, ++ (unsigned long) param.pid, ++ (unsigned long) param.sig); ++ if (ret > 0) { ++ copy_to_user(&((struct gptu_ioctl_param *) arg)-> ++ timer, &ret, sizeof(&ret)); ++ ret = 0; ++ } ++ break; ++ case GPTU_FREE_TIMER: ++ ret = lq_free_timer(param.timer); ++ break; ++ case GPTU_START_TIMER: ++ ret = lq_start_timer(param.timer, param.flag); ++ break; ++ case GPTU_STOP_TIMER: ++ ret = lq_stop_timer(param.timer); ++ break; ++ case GPTU_GET_COUNT_VALUE: ++ ret = lq_get_count_value(param.timer, ¶m.value); ++ if (!ret) ++ copy_to_user(&((struct gptu_ioctl_param *) arg)-> ++ value, ¶m.value, ++ sizeof(param.value)); ++ break; ++ case GPTU_CALCULATE_DIVIDER: ++ param.value = lq_cal_divider(param.value); ++ if (param.value == 0) ++ ret = -EINVAL; ++ else { ++ copy_to_user(&((struct gptu_ioctl_param *) arg)-> ++ value, ¶m.value, ++ sizeof(param.value)); ++ ret = 0; ++ } ++ break; ++ case GPTU_SET_TIMER: ++ ret = lq_set_timer(param.timer, param.value, ++ TIMER_FLAG_MASK_STOP(param.flag) != ++ TIMER_FLAG_ONCE ? 1 : 0, ++ TIMER_FLAG_MASK_SRC(param.flag) == ++ TIMER_FLAG_EXT_SRC ? 1 : 0, ++ TIMER_FLAG_MASK_HANDLE(param.flag) == ++ TIMER_FLAG_SIGNAL ? TIMER_FLAG_SIGNAL : ++ TIMER_FLAG_NO_HANDLE, ++ (unsigned long) param.pid, ++ (unsigned long) param.sig); ++ if (ret > 0) { ++ copy_to_user(&((struct gptu_ioctl_param *) arg)-> ++ timer, &ret, sizeof(&ret)); ++ ret = 0; ++ } ++ break; ++ case GPTU_SET_COUNTER: ++ lq_set_counter(param.timer, param.flag, param.value, 0, 0); ++ if (ret > 0) { ++ copy_to_user(&((struct gptu_ioctl_param *) arg)-> ++ timer, &ret, sizeof(&ret)); ++ ret = 0; ++ } ++ break; ++ default: ++ ret = -ENOTTY; ++ } ++ ++ return ret; ++} ++ ++static int gptu_open(struct inode *inode, struct file *file) ++{ ++ return 0; ++} ++ ++static int gptu_release(struct inode *inode, struct file *file) ++{ ++ return 0; ++} ++ ++int __init lq_gptu_init(void) ++{ ++ int ret; ++ unsigned int i; ++ ++ ltq_w32(0, LQ_GPTU_IRNEN); ++ ltq_w32(0xfff, LQ_GPTU_IRNCR); ++ ++ memset(&timer_dev, 0, sizeof(timer_dev)); ++ mutex_init(&timer_dev.gptu_mutex); ++ ++ lq_enable_gptu(); ++ timer_dev.number_of_timers = GPTU_ID_CFG * 2; ++ lq_disable_gptu(); ++ if (timer_dev.number_of_timers > MAX_NUM_OF_32BIT_TIMER_BLOCKS * 2) ++ timer_dev.number_of_timers = MAX_NUM_OF_32BIT_TIMER_BLOCKS * 2; ++ printk(KERN_INFO "gptu: totally %d 16-bit timers/counters\n", timer_dev.number_of_timers); ++ ++ ret = misc_register(&gptu_miscdev); ++ if (ret) { ++ printk(KERN_ERR "gptu: can't misc_register, get error %d\n", -ret); ++ return ret; ++ } else { ++ printk(KERN_INFO "gptu: misc_register on minor %d\n", gptu_miscdev.minor); ++ } ++ ++ for (i = 0; i < timer_dev.number_of_timers; i++) { ++ ret = request_irq(TIMER_INTERRUPT + i, timer_irq_handler, IRQF_TIMER, gptu_miscdev.name, &timer_dev.timer[i]); ++ if (ret) { ++ for (; i >= 0; i--) ++ free_irq(TIMER_INTERRUPT + i, &timer_dev.timer[i]); ++ misc_deregister(&gptu_miscdev); ++ printk(KERN_ERR "gptu: failed in requesting irq (%d), get error %d\n", i, -ret); ++ return ret; ++ } else { ++ timer_dev.timer[i].irq = TIMER_INTERRUPT + i; ++ disable_irq(timer_dev.timer[i].irq); ++ printk(KERN_INFO "gptu: succeeded to request irq %d\n", timer_dev.timer[i].irq); ++ } ++ } ++ ++ return 0; ++} ++ ++void __exit lq_gptu_exit(void) ++{ ++ unsigned int i; ++ ++ for (i = 0; i < timer_dev.number_of_timers; i++) { ++ if (timer_dev.timer[i].f_irq_on) ++ disable_irq(timer_dev.timer[i].irq); ++ free_irq(timer_dev.timer[i].irq, &timer_dev.timer[i]); ++ } ++ lq_disable_gptu(); ++ misc_deregister(&gptu_miscdev); ++} ++ ++module_init(lq_gptu_init); ++module_exit(lq_gptu_exit); ++ ++#endif diff --git a/target/linux/lantiq/patches-4.1/0012-pinctrl-lantiq-fix-up-pinmux.patch b/target/linux/lantiq/patches-4.1/0012-pinctrl-lantiq-fix-up-pinmux.patch new file mode 100644 index 0000000000..ecd143f91f --- /dev/null +++ b/target/linux/lantiq/patches-4.1/0012-pinctrl-lantiq-fix-up-pinmux.patch @@ -0,0 +1,79 @@ +From 25494c55a4007a1409f53ddbafd661636e47ea34 Mon Sep 17 00:00:00 2001 +From: John Crispin +Date: Fri, 9 Aug 2013 20:38:15 +0200 +Subject: [PATCH 12/36] pinctrl/lantiq: fix up pinmux + +We found out how to set the gphy led pinmuxing. + +Signed-off-by: John Crispin +--- + drivers/pinctrl/pinctrl-xway.c | 28 ++++++++++++++++++++++++++-- + 1 file changed, 26 insertions(+), 2 deletions(-) + +--- a/drivers/pinctrl/pinctrl-xway.c ++++ b/drivers/pinctrl/pinctrl-xway.c +@@ -609,10 +609,9 @@ static struct pinctrl_desc xway_pctrl_de + .confops = &xway_pinconf_ops, + }; + +-static inline int xway_mux_apply(struct pinctrl_dev *pctrldev, ++static int mux_apply(struct ltq_pinmux_info *info, + int pin, int mux) + { +- struct ltq_pinmux_info *info = pinctrl_dev_get_drvdata(pctrldev); + int port = PORT(pin); + u32 alt1_reg = GPIO_ALT1(pin); + +@@ -632,6 +631,14 @@ static inline int xway_mux_apply(struct + return 0; + } + ++static inline int xway_mux_apply(struct pinctrl_dev *pctrldev, ++ int pin, int mux) ++{ ++ struct ltq_pinmux_info *info = pinctrl_dev_get_drvdata(pctrldev); ++ ++ return mux_apply(info, pin, mux); ++} ++ + static const struct ltq_cfg_param xway_cfg_params[] = { + {"lantiq,pull", LTQ_PINCONF_PARAM_PULL}, + {"lantiq,open-drain", LTQ_PINCONF_PARAM_OPEN_DRAIN}, +@@ -676,6 +683,10 @@ static int xway_gpio_dir_out(struct gpio + { + struct ltq_pinmux_info *info = dev_get_drvdata(chip->dev); + ++ if (PORT(pin) == PORT3) ++ gpio_setbit(info->membase[0], GPIO3_OD, PORT_PIN(pin)); ++ else ++ gpio_setbit(info->membase[0], GPIO_OD(pin), PORT_PIN(pin)); + gpio_setbit(info->membase[0], GPIO_DIR(pin), PORT_PIN(pin)); + xway_gpio_set(chip, pin, val); + +@@ -696,6 +707,18 @@ static void xway_gpio_free(struct gpio_c + pinctrl_free_gpio(gpio); + } + ++static int xway_gpio_to_irq(struct gpio_chip *chip, unsigned offset) ++{ ++ struct ltq_pinmux_info *info = dev_get_drvdata(chip->dev); ++ int i; ++ ++ for (i = 0; i < info->num_exin; i++) ++ if (info->exin[i] == offset) ++ return ltq_eiu_get_irq(i); ++ ++ return -1; ++} ++ + static struct gpio_chip xway_chip = { + .label = "gpio-xway", + .direction_input = xway_gpio_dir_in, +@@ -704,6 +727,7 @@ static struct gpio_chip xway_chip = { + .set = xway_gpio_set, + .request = xway_gpio_req, + .free = xway_gpio_free, ++ .to_irq = xway_gpio_to_irq, + .base = -1, + }; + diff --git a/target/linux/lantiq/patches-4.1/0013-MTD-lantiq-xway-fix-invalid-operator.patch b/target/linux/lantiq/patches-4.1/0013-MTD-lantiq-xway-fix-invalid-operator.patch new file mode 100644 index 0000000000..c6d3819c2f --- /dev/null +++ b/target/linux/lantiq/patches-4.1/0013-MTD-lantiq-xway-fix-invalid-operator.patch @@ -0,0 +1,24 @@ +From 8e34da603f442624bb70e887d8f42064bb924224 Mon Sep 17 00:00:00 2001 +From: John Crispin +Date: Sun, 28 Jul 2013 18:03:54 +0200 +Subject: [PATCH 13/36] MTD: lantiq: xway: fix invalid operator + +xway_read_byte should use a logic or and not an add operator when working out +the nand address. + +Signed-off-by: John Crispin +--- + drivers/mtd/nand/xway_nand.c | 2 +- + 1 file changed, 1 insertion(+), 1 deletion(-) + +--- a/drivers/mtd/nand/xway_nand.c ++++ b/drivers/mtd/nand/xway_nand.c +@@ -124,7 +124,7 @@ static unsigned char xway_read_byte(stru + int ret; + + spin_lock_irqsave(&ebu_lock, flags); +- ret = ltq_r8((void __iomem *)(nandaddr + NAND_READ_DATA)); ++ ret = ltq_r8((void __iomem *)(nandaddr | NAND_READ_DATA)); + spin_unlock_irqrestore(&ebu_lock, flags); + + return ret; diff --git a/target/linux/lantiq/patches-4.1/0014-MTD-lantiq-xway-the-latched-command-should-be-persis.patch b/target/linux/lantiq/patches-4.1/0014-MTD-lantiq-xway-the-latched-command-should-be-persis.patch new file mode 100644 index 0000000000..6a7785b016 --- /dev/null +++ b/target/linux/lantiq/patches-4.1/0014-MTD-lantiq-xway-the-latched-command-should-be-persis.patch @@ -0,0 +1,44 @@ +From b454cefd675fc1bd3d8c690c1bd1d8f4678e9922 Mon Sep 17 00:00:00 2001 +From: John Crispin +Date: Sun, 28 Jul 2013 18:06:39 +0200 +Subject: [PATCH 14/36] MTD: lantiq: xway: the latched command should be + persistent + +Signed-off-by: John Crispin +--- + drivers/mtd/nand/xway_nand.c | 12 ++++++------ + 1 file changed, 6 insertions(+), 6 deletions(-) + +--- a/drivers/mtd/nand/xway_nand.c ++++ b/drivers/mtd/nand/xway_nand.c +@@ -54,6 +54,8 @@ + #define NAND_CON_CSMUX (1 << 1) + #define NAND_CON_NANDM 1 + ++static u32 xway_latchcmd; ++ + static void xway_reset_chip(struct nand_chip *chip) + { + unsigned long nandaddr = (unsigned long) chip->IO_ADDR_W; +@@ -94,17 +96,15 @@ static void xway_cmd_ctrl(struct mtd_inf + unsigned long flags; + + if (ctrl & NAND_CTRL_CHANGE) { +- nandaddr &= ~(NAND_WRITE_CMD | NAND_WRITE_ADDR); + if (ctrl & NAND_CLE) +- nandaddr |= NAND_WRITE_CMD; +- else +- nandaddr |= NAND_WRITE_ADDR; +- this->IO_ADDR_W = (void __iomem *) nandaddr; ++ xway_latchcmd = NAND_WRITE_CMD; ++ else if (ctrl & NAND_ALE) ++ xway_latchcmd = NAND_WRITE_ADDR; + } + + if (cmd != NAND_CMD_NONE) { + spin_lock_irqsave(&ebu_lock, flags); +- writeb(cmd, this->IO_ADDR_W); ++ writeb(cmd, (void __iomem *) (nandaddr | xway_latchcmd)); + while ((ltq_ebu_r32(EBU_NAND_WAIT) & NAND_WAIT_WR_C) == 0) + ; + spin_unlock_irqrestore(&ebu_lock, flags); diff --git a/target/linux/lantiq/patches-4.1/0015-MTD-lantiq-xway-remove-endless-loop.patch b/target/linux/lantiq/patches-4.1/0015-MTD-lantiq-xway-remove-endless-loop.patch new file mode 100644 index 0000000000..4bd166863b --- /dev/null +++ b/target/linux/lantiq/patches-4.1/0015-MTD-lantiq-xway-remove-endless-loop.patch @@ -0,0 +1,41 @@ +From 76e153079f02d26e3357302d2886a0c8aaaec64d Mon Sep 17 00:00:00 2001 +From: John Crispin +Date: Sun, 28 Jul 2013 18:02:06 +0200 +Subject: [PATCH 15/36] MTD: lantiq: xway: remove endless loop + +The reset loop logic could run into a endless loop. Lets fix it as requested. + +--> http://lists.infradead.org/pipermail/linux-mtd/2012-September/044240.html + +Signed-off-by: John Crispin +--- + drivers/mtd/nand/xway_nand.c | 10 ++++++++-- + 1 file changed, 8 insertions(+), 2 deletions(-) + +--- a/drivers/mtd/nand/xway_nand.c ++++ b/drivers/mtd/nand/xway_nand.c +@@ -59,16 +59,22 @@ static u32 xway_latchcmd; + static void xway_reset_chip(struct nand_chip *chip) + { + unsigned long nandaddr = (unsigned long) chip->IO_ADDR_W; ++ unsigned long timeout; + unsigned long flags; + + nandaddr &= ~NAND_WRITE_ADDR; + nandaddr |= NAND_WRITE_CMD; + + /* finish with a reset */ ++ timeout = jiffies + msecs_to_jiffies(20); ++ + spin_lock_irqsave(&ebu_lock, flags); + writeb(NAND_WRITE_CMD_RESET, (void __iomem *) nandaddr); +- while ((ltq_ebu_r32(EBU_NAND_WAIT) & NAND_WAIT_WR_C) == 0) +- ; ++ do { ++ if ((ltq_ebu_r32(EBU_NAND_WAIT) & NAND_WAIT_WR_C) == 0) ++ break; ++ cond_resched(); ++ } while (!time_after_eq(jiffies, timeout)); + spin_unlock_irqrestore(&ebu_lock, flags); + } + diff --git a/target/linux/lantiq/patches-4.1/0016-MTD-lantiq-xway-add-missing-write_buf-and-read_buf-t.patch b/target/linux/lantiq/patches-4.1/0016-MTD-lantiq-xway-add-missing-write_buf-and-read_buf-t.patch new file mode 100644 index 0000000000..f20878cd25 --- /dev/null +++ b/target/linux/lantiq/patches-4.1/0016-MTD-lantiq-xway-add-missing-write_buf-and-read_buf-t.patch @@ -0,0 +1,55 @@ +From 65df9d63eaee02c25e879b33dd42aceb78e57842 Mon Sep 17 00:00:00 2001 +From: John Crispin +Date: Sun, 28 Jul 2013 17:59:51 +0200 +Subject: [PATCH 16/36] MTD: lantiq: xway: add missing write_buf and read_buf + to nand driver + +Signed-off-by: John Crispin +--- + drivers/mtd/nand/xway_nand.c | 28 ++++++++++++++++++++++++++++ + 1 file changed, 28 insertions(+) + +--- a/drivers/mtd/nand/xway_nand.c ++++ b/drivers/mtd/nand/xway_nand.c +@@ -136,6 +136,32 @@ static unsigned char xway_read_byte(stru + return ret; + } + ++static void xway_read_buf(struct mtd_info *mtd, u_char *buf, int len) ++{ ++ struct nand_chip *this = mtd->priv; ++ unsigned long nandaddr = (unsigned long) this->IO_ADDR_R; ++ unsigned long flags; ++ int i; ++ ++ spin_lock_irqsave(&ebu_lock, flags); ++ for (i = 0; i < len; i++) ++ buf[i] = ltq_r8((void __iomem *)(nandaddr | NAND_READ_DATA)); ++ spin_unlock_irqrestore(&ebu_lock, flags); ++} ++ ++static void xway_write_buf(struct mtd_info *mtd, const u_char *buf, int len) ++{ ++ struct nand_chip *this = mtd->priv; ++ unsigned long nandaddr = (unsigned long) this->IO_ADDR_W; ++ unsigned long flags; ++ int i; ++ ++ spin_lock_irqsave(&ebu_lock, flags); ++ for (i = 0; i < len; i++) ++ ltq_w8(buf[i], (void __iomem *)(nandaddr | NAND_WRITE_DATA)); ++ spin_unlock_irqrestore(&ebu_lock, flags); ++} ++ + static int xway_nand_probe(struct platform_device *pdev) + { + struct nand_chip *this = platform_get_drvdata(pdev); +@@ -181,6 +207,8 @@ static struct platform_nand_data xway_na + .dev_ready = xway_dev_ready, + .select_chip = xway_select_chip, + .read_byte = xway_read_byte, ++ .read_buf = xway_read_buf, ++ .write_buf = xway_write_buf, + } + }; + diff --git a/target/linux/lantiq/patches-4.1/0017-MTD-xway-fix-nand-locking.patch b/target/linux/lantiq/patches-4.1/0017-MTD-xway-fix-nand-locking.patch new file mode 100644 index 0000000000..737469aab5 --- /dev/null +++ b/target/linux/lantiq/patches-4.1/0017-MTD-xway-fix-nand-locking.patch @@ -0,0 +1,89 @@ +From aa705c1b0860da91f2ed1a4c0b57337e6de689e1 Mon Sep 17 00:00:00 2001 +From: John Crispin +Date: Thu, 7 Aug 2014 18:55:31 +0200 +Subject: [PATCH 17/36] MTD: xway: fix nand locking + +Signed-off-by: John Crispin +--- + drivers/mtd/nand/xway_nand.c | 15 +++------------ + 1 file changed, 3 insertions(+), 12 deletions(-) + +--- a/drivers/mtd/nand/xway_nand.c ++++ b/drivers/mtd/nand/xway_nand.c +@@ -80,13 +80,16 @@ static void xway_reset_chip(struct nand_ + + static void xway_select_chip(struct mtd_info *mtd, int chip) + { ++ static unsigned long csflags; + + switch (chip) { + case -1: + ltq_ebu_w32_mask(NAND_CON_CE, 0, EBU_NAND_CON); + ltq_ebu_w32_mask(NAND_CON_NANDM, 0, EBU_NAND_CON); ++ spin_unlock_irqrestore(&ebu_lock, csflags); + break; + case 0: ++ spin_lock_irqsave(&ebu_lock, csflags); + ltq_ebu_w32_mask(0, NAND_CON_NANDM, EBU_NAND_CON); + ltq_ebu_w32_mask(0, NAND_CON_CE, EBU_NAND_CON); + break; +@@ -99,7 +102,6 @@ static void xway_cmd_ctrl(struct mtd_inf + { + struct nand_chip *this = mtd->priv; + unsigned long nandaddr = (unsigned long) this->IO_ADDR_W; +- unsigned long flags; + + if (ctrl & NAND_CTRL_CHANGE) { + if (ctrl & NAND_CLE) +@@ -109,11 +111,9 @@ static void xway_cmd_ctrl(struct mtd_inf + } + + if (cmd != NAND_CMD_NONE) { +- spin_lock_irqsave(&ebu_lock, flags); + writeb(cmd, (void __iomem *) (nandaddr | xway_latchcmd)); + while ((ltq_ebu_r32(EBU_NAND_WAIT) & NAND_WAIT_WR_C) == 0) + ; +- spin_unlock_irqrestore(&ebu_lock, flags); + } + } + +@@ -126,12 +126,9 @@ static unsigned char xway_read_byte(stru + { + struct nand_chip *this = mtd->priv; + unsigned long nandaddr = (unsigned long) this->IO_ADDR_R; +- unsigned long flags; + int ret; + +- spin_lock_irqsave(&ebu_lock, flags); + ret = ltq_r8((void __iomem *)(nandaddr | NAND_READ_DATA)); +- spin_unlock_irqrestore(&ebu_lock, flags); + + return ret; + } +@@ -140,26 +137,20 @@ static void xway_read_buf(struct mtd_inf + { + struct nand_chip *this = mtd->priv; + unsigned long nandaddr = (unsigned long) this->IO_ADDR_R; +- unsigned long flags; + int i; + +- spin_lock_irqsave(&ebu_lock, flags); + for (i = 0; i < len; i++) + buf[i] = ltq_r8((void __iomem *)(nandaddr | NAND_READ_DATA)); +- spin_unlock_irqrestore(&ebu_lock, flags); + } + + static void xway_write_buf(struct mtd_info *mtd, const u_char *buf, int len) + { + struct nand_chip *this = mtd->priv; + unsigned long nandaddr = (unsigned long) this->IO_ADDR_W; +- unsigned long flags; + int i; + +- spin_lock_irqsave(&ebu_lock, flags); + for (i = 0; i < len; i++) + ltq_w8(buf[i], (void __iomem *)(nandaddr | NAND_WRITE_DATA)); +- spin_unlock_irqrestore(&ebu_lock, flags); + } + + static int xway_nand_probe(struct platform_device *pdev) diff --git a/target/linux/lantiq/patches-4.1/0018-MTD-nand-lots-of-xrx200-fixes.patch b/target/linux/lantiq/patches-4.1/0018-MTD-nand-lots-of-xrx200-fixes.patch new file mode 100644 index 0000000000..5500861c22 --- /dev/null +++ b/target/linux/lantiq/patches-4.1/0018-MTD-nand-lots-of-xrx200-fixes.patch @@ -0,0 +1,125 @@ +From 997a8965db8417266bea3fbdcfa3e5655a1b52fa Mon Sep 17 00:00:00 2001 +From: John Crispin +Date: Tue, 9 Sep 2014 23:12:15 +0200 +Subject: [PATCH 18/36] MTD: nand: lots of xrx200 fixes + +Signed-off-by: John Crispin +--- + drivers/mtd/nand/xway_nand.c | 63 ++++++++++++++++++++++++++++++++++++++++++ + 1 file changed, 63 insertions(+) + +--- a/drivers/mtd/nand/xway_nand.c ++++ b/drivers/mtd/nand/xway_nand.c +@@ -54,8 +54,27 @@ + #define NAND_CON_CSMUX (1 << 1) + #define NAND_CON_NANDM 1 + ++#define DANUBE_PCI_REG32( addr ) (*(volatile u32 *)(addr)) ++#define PCI_CR_PR_OFFSET (KSEG1+0x1E105400) ++#define PCI_CR_PC_ARB (PCI_CR_PR_OFFSET + 0x0080) ++ + static u32 xway_latchcmd; + ++/* ++ * req_mask provides a mechanism to prevent interference between ++ * nand and pci (probably only relevant for the BT Home Hub 2B). ++ * Setting it causes the corresponding pci req pins to be masked ++ * during nand access, and also moves ebu locking from the read/write ++ * functions to the chip select function to ensure that the whole ++ * operation runs with interrupts disabled. ++ * In addition it switches on some extra waiting in xway_cmd_ctrl(). ++ * This seems to be necessary if the ebu_cs1 pin has open-drain disabled, ++ * which in turn seems to be necessary for the nor chip to be recognised ++ * reliably, on a board (Home Hub 2B again) which has both nor and nand. ++ */ ++ ++static __be32 req_mask = 0; ++ + static void xway_reset_chip(struct nand_chip *chip) + { + unsigned long nandaddr = (unsigned long) chip->IO_ADDR_W; +@@ -86,12 +105,24 @@ static void xway_select_chip(struct mtd_ + case -1: + ltq_ebu_w32_mask(NAND_CON_CE, 0, EBU_NAND_CON); + ltq_ebu_w32_mask(NAND_CON_NANDM, 0, EBU_NAND_CON); ++ ++ if (req_mask) { ++ /* Unmask all external PCI request */ ++ DANUBE_PCI_REG32(PCI_CR_PC_ARB) &= ~(req_mask << 16); ++ } + spin_unlock_irqrestore(&ebu_lock, csflags); ++ + break; + case 0: + spin_lock_irqsave(&ebu_lock, csflags); ++ if (req_mask) { ++ /* Mask all external PCI request */ ++ DANUBE_PCI_REG32(PCI_CR_PC_ARB) |= (req_mask << 16); ++ } ++ + ltq_ebu_w32_mask(0, NAND_CON_NANDM, EBU_NAND_CON); + ltq_ebu_w32_mask(0, NAND_CON_CE, EBU_NAND_CON); ++ + break; + default: + BUG(); +@@ -103,6 +134,12 @@ static void xway_cmd_ctrl(struct mtd_inf + struct nand_chip *this = mtd->priv; + unsigned long nandaddr = (unsigned long) this->IO_ADDR_W; + ++ if (req_mask) { ++ if (cmd != NAND_CMD_STATUS) ++ ltq_ebu_w32(EBU_NAND_WAIT, 0); /* Clear nand ready */ ++ } ++ ++ + if (ctrl & NAND_CTRL_CHANGE) { + if (ctrl & NAND_CLE) + xway_latchcmd = NAND_WRITE_CMD; +@@ -115,6 +152,24 @@ static void xway_cmd_ctrl(struct mtd_inf + while ((ltq_ebu_r32(EBU_NAND_WAIT) & NAND_WAIT_WR_C) == 0) + ; + } ++ ++ if (req_mask) { ++ /* ++ * program and erase have their own busy handlers ++ * status and sequential in needs no delay ++ */ ++ switch (cmd) { ++ case NAND_CMD_ERASE1: ++ case NAND_CMD_SEQIN: ++ case NAND_CMD_STATUS: ++ case NAND_CMD_READID: ++ return; ++ } ++ ++ /* wait until command is processed */ ++ while ((ltq_ebu_r32(EBU_NAND_WAIT) & NAND_WAIT_RD) == 0) ++ ; ++ } + } + + static int xway_dev_ready(struct mtd_info *mtd) +@@ -157,6 +212,8 @@ static int xway_nand_probe(struct platfo + { + struct nand_chip *this = platform_get_drvdata(pdev); + unsigned long nandaddr = (unsigned long) this->IO_ADDR_W; ++ const __be32 *req_mask_ptr = of_get_property(pdev->dev.of_node, ++ "req-mask", NULL); + const __be32 *cs = of_get_property(pdev->dev.of_node, + "lantiq,cs", NULL); + u32 cs_flag = 0; +@@ -165,6 +222,12 @@ static int xway_nand_probe(struct platfo + if (cs && (*cs == 1)) + cs_flag = NAND_CON_IN_CS1 | NAND_CON_OUT_CS1; + ++ /* ++ * Load the PCI req lines to mask from the device tree. If the ++ * property is not present, setting req_mask to 0 disables masking. ++ */ ++ req_mask = (req_mask_ptr ? *req_mask_ptr : 0); ++ + /* setup the EBU to run in NAND mode on our base addr */ + ltq_ebu_w32(CPHYSADDR(nandaddr) + | ADDSEL1_MASK(3) | ADDSEL1_REGEN, EBU_ADDSEL1); diff --git a/target/linux/lantiq/patches-4.1/0020-MTD-lantiq-handle-NO_XIP-on-cfi0001-flash.patch b/target/linux/lantiq/patches-4.1/0020-MTD-lantiq-handle-NO_XIP-on-cfi0001-flash.patch new file mode 100644 index 0000000000..36a899d4f8 --- /dev/null +++ b/target/linux/lantiq/patches-4.1/0020-MTD-lantiq-handle-NO_XIP-on-cfi0001-flash.patch @@ -0,0 +1,25 @@ +From e3b20f04e9f9cae1babe091fdc1d08d7703ae344 Mon Sep 17 00:00:00 2001 +From: John Crispin +Date: Thu, 7 Aug 2014 18:18:00 +0200 +Subject: [PATCH 20/36] MTD: lantiq: handle NO_XIP on cfi0001 flash + +Signed-off-by: John Crispin +--- + drivers/mtd/maps/lantiq-flash.c | 6 +++++- + 1 file changed, 5 insertions(+), 1 deletion(-) + +--- a/drivers/mtd/maps/lantiq-flash.c ++++ b/drivers/mtd/maps/lantiq-flash.c +@@ -139,7 +139,11 @@ ltq_mtd_probe(struct platform_device *pd + if (!ltq_mtd->map) + return -ENOMEM; + +- ltq_mtd->map->phys = ltq_mtd->res->start; ++ if (of_find_property(pdev->dev.of_node, "lantiq,noxip", NULL)) ++ ltq_mtd->map->phys = NO_XIP; ++ else ++ ltq_mtd->map->phys = ltq_mtd->res->start; ++ ltq_mtd->res->start; + ltq_mtd->map->size = resource_size(ltq_mtd->res); + ltq_mtd->map->virt = devm_ioremap_resource(&pdev->dev, ltq_mtd->res); + if (IS_ERR(ltq_mtd->map->virt)) diff --git a/target/linux/lantiq/patches-4.1/0022-MTD-m25p80-allow-loading-mtd-name-from-OF.patch b/target/linux/lantiq/patches-4.1/0022-MTD-m25p80-allow-loading-mtd-name-from-OF.patch new file mode 100644 index 0000000000..1f0ffe1bcf --- /dev/null +++ b/target/linux/lantiq/patches-4.1/0022-MTD-m25p80-allow-loading-mtd-name-from-OF.patch @@ -0,0 +1,44 @@ +From 4400e1f593ea40a51912128adb4f53d59e62cad8 Mon Sep 17 00:00:00 2001 +From: John Crispin +Date: Wed, 10 Sep 2014 22:40:18 +0200 +Subject: [PATCH 22/36] MTD: m25p80: allow loading mtd name from OF + +In accordance with the physmap flash we should honour the linux,mtd-name +property when deciding what name the mtd device has. + +Signed-off-by: Thomas Langer +Signed-off-by: John Crispin +--- + drivers/mtd/devices/m25p80.c | 6 ++++++ + 1 file changed, 6 insertions(+) + +--- a/drivers/mtd/devices/m25p80.c ++++ b/drivers/mtd/devices/m25p80.c +@@ -19,6 +19,7 @@ + #include + #include + #include ++#include + + #include + #include +@@ -184,6 +185,10 @@ static int m25p_probe(struct spi_device + enum read_mode mode = SPI_NOR_NORMAL; + char *flash_name = NULL; + int ret; ++ const char __maybe_unused *of_mtd_name = NULL; ++ ++ of_property_read_string(spi->dev.of_node, ++ "linux,mtd-name", &of_mtd_name); + + data = dev_get_platdata(&spi->dev); + +@@ -215,6 +220,8 @@ static int m25p_probe(struct spi_device + + if (data && data->name) + flash->mtd.name = data->name; ++ else if (of_mtd_name) ++ flash->mtd.name = of_mtd_name; + + /* For some (historical?) reason many platforms provide two different + * names in flash_platform_data: "name" and "type". Quite often name is diff --git a/target/linux/lantiq/patches-4.1/0023-NET-PHY-adds-driver-for-lantiq-PHY11G.patch b/target/linux/lantiq/patches-4.1/0023-NET-PHY-adds-driver-for-lantiq-PHY11G.patch new file mode 100644 index 0000000000..c93fdc8d0c --- /dev/null +++ b/target/linux/lantiq/patches-4.1/0023-NET-PHY-adds-driver-for-lantiq-PHY11G.patch @@ -0,0 +1,271 @@ +From 0a63ab263725c427051a8bbaa0732b749627da27 Mon Sep 17 00:00:00 2001 +From: John Crispin +Date: Thu, 7 Aug 2014 18:15:36 +0200 +Subject: [PATCH 23/36] NET: PHY: adds driver for lantiq PHY11G + +Signed-off-by: John Crispin +--- + drivers/net/phy/Kconfig | 5 + + drivers/net/phy/Makefile | 1 + + drivers/net/phy/lantiq.c | 231 ++++++++++++++++++++++++++++++++++++++++++++++ + 3 files changed, 237 insertions(+) + create mode 100644 drivers/net/phy/lantiq.c + +--- a/drivers/net/phy/Kconfig ++++ b/drivers/net/phy/Kconfig +@@ -165,6 +165,11 @@ config RTL8306_PHY + tristate "Driver for Realtek RTL8306S switches" + select SWCONFIG + ++config LANTIQ_PHY ++ tristate "Driver for Lantiq PHYs" ++ ---help--- ++ Supports the 11G and 22E PHYs. ++ + config FIXED_PHY + tristate "Driver for MDIO Bus/PHY emulation with fixed speed/link PHYs" + depends on PHYLIB +--- a/drivers/net/phy/Makefile ++++ b/drivers/net/phy/Makefile +@@ -40,6 +40,7 @@ obj-$(CONFIG_NATIONAL_PHY) += national.o + obj-$(CONFIG_DP83640_PHY) += dp83640.o + obj-$(CONFIG_STE10XP) += ste10Xp.o + obj-$(CONFIG_MICREL_PHY) += micrel.o ++obj-$(CONFIG_LANTIQ_PHY) += lantiq.o + obj-$(CONFIG_MDIO_OCTEON) += mdio-octeon.o + obj-$(CONFIG_MICREL_KS8995MA) += spi_ks8995.o + obj-$(CONFIG_AT803X_PHY) += at803x.o +--- /dev/null ++++ b/drivers/net/phy/lantiq.c +@@ -0,0 +1,231 @@ ++/* ++ * This program is free software; you can redistribute it and/or modify ++ * it under the terms of the GNU General Public License as published by ++ * the Free Software Foundation; either version 2 of the License, or ++ * (at your option) any later version. ++ * ++ * This program is distributed in the hope that it will be useful, ++ * but WITHOUT ANY WARRANTY; without even the implied warranty of ++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the ++ * GNU General Public License for more details. ++ * ++ * You should have received a copy of the GNU General Public License ++ * along with this program; if not, write to the Free Software ++ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307, USA. ++ * ++ * Copyright (C) 2012 Daniel Schwierzeck ++ */ ++ ++#include ++#include ++ ++#define MII_MMDCTRL 0x0d ++#define MII_MMDDATA 0x0e ++ ++#define MII_VR9_11G_IMASK 0x19 /* interrupt mask */ ++#define MII_VR9_11G_ISTAT 0x1a /* interrupt status */ ++ ++#define INT_VR9_11G_WOL BIT(15) /* Wake-On-LAN */ ++#define INT_VR9_11G_ANE BIT(11) /* Auto-Neg error */ ++#define INT_VR9_11G_ANC BIT(10) /* Auto-Neg complete */ ++#define INT_VR9_11G_ADSC BIT(5) /* Link auto-downspeed detect */ ++#define INT_VR9_11G_DXMC BIT(2) /* Duplex mode change */ ++#define INT_VR9_11G_LSPC BIT(1) /* Link speed change */ ++#define INT_VR9_11G_LSTC BIT(0) /* Link state change */ ++#define INT_VR9_11G_MASK (INT_VR9_11G_LSTC | INT_VR9_11G_ADSC) ++ ++#define ADVERTISED_MPD BIT(10) /* Multi-port device */ ++ ++#define MMD_DEVAD 0x1f ++#define MMD_ACTYPE_SHIFT 14 ++#define MMD_ACTYPE_ADDRESS (0 << MMD_ACTYPE_SHIFT) ++#define MMD_ACTYPE_DATA (1 << MMD_ACTYPE_SHIFT) ++#define MMD_ACTYPE_DATA_PI (2 << MMD_ACTYPE_SHIFT) ++#define MMD_ACTYPE_DATA_PIWR (3 << MMD_ACTYPE_SHIFT) ++ ++static __maybe_unused int vr9_gphy_mmd_read(struct phy_device *phydev, ++ u16 regnum) ++{ ++ phy_write(phydev, MII_MMDCTRL, MMD_ACTYPE_ADDRESS | MMD_DEVAD); ++ phy_write(phydev, MII_MMDDATA, regnum); ++ phy_write(phydev, MII_MMDCTRL, MMD_ACTYPE_DATA | MMD_DEVAD); ++ ++ return phy_read(phydev, MII_MMDDATA); ++} ++ ++static __maybe_unused int vr9_gphy_mmd_write(struct phy_device *phydev, ++ u16 regnum, u16 val) ++{ ++ phy_write(phydev, MII_MMDCTRL, MMD_ACTYPE_ADDRESS | MMD_DEVAD); ++ phy_write(phydev, MII_MMDDATA, regnum); ++ phy_write(phydev, MII_MMDCTRL, MMD_ACTYPE_DATA | MMD_DEVAD); ++ phy_write(phydev, MII_MMDDATA, val); ++ ++ return 0; ++} ++ ++static int vr9_gphy_config_init(struct phy_device *phydev) ++{ ++ int err; ++ ++ dev_dbg(&phydev->dev, "%s\n", __func__); ++ ++ /* Mask all interrupts */ ++ err = phy_write(phydev, MII_VR9_11G_IMASK, 0); ++ if (err) ++ return err; ++ ++ /* Clear all pending interrupts */ ++ phy_read(phydev, MII_VR9_11G_ISTAT); ++ ++ vr9_gphy_mmd_write(phydev, 0x1e0, 0xc5); ++ vr9_gphy_mmd_write(phydev, 0x1e1, 0x67); ++ vr9_gphy_mmd_write(phydev, 0x1e2, 0x42); ++ vr9_gphy_mmd_write(phydev, 0x1e3, 0x10); ++ vr9_gphy_mmd_write(phydev, 0x1e4, 0x70); ++ vr9_gphy_mmd_write(phydev, 0x1e5, 0x03); ++ vr9_gphy_mmd_write(phydev, 0x1e6, 0x20); ++ vr9_gphy_mmd_write(phydev, 0x1e7, 0x00); ++ vr9_gphy_mmd_write(phydev, 0x1e8, 0x40); ++ vr9_gphy_mmd_write(phydev, 0x1e9, 0x20); ++ ++ return 0; ++} ++ ++static int vr9_gphy_config_aneg(struct phy_device *phydev) ++{ ++ int reg, err; ++ ++ /* Advertise as multi-port device */ ++ reg = phy_read(phydev, MII_CTRL1000); ++ reg |= ADVERTISED_MPD; ++ err = phy_write(phydev, MII_CTRL1000, reg); ++ if (err) ++ return err; ++ ++ return genphy_config_aneg(phydev); ++} ++ ++static int vr9_gphy_ack_interrupt(struct phy_device *phydev) ++{ ++ int reg; ++ ++ /* ++ * Possible IRQ numbers: ++ * - IM3_IRL18 for GPHY0 ++ * - IM3_IRL17 for GPHY1 ++ * ++ * Due to a silicon bug IRQ lines are not really independent from ++ * each other. Sometimes the two lines are driven at the same time ++ * if only one GPHY core raises the interrupt. ++ */ ++ ++ reg = phy_read(phydev, MII_VR9_11G_ISTAT); ++ ++ return (reg < 0) ? reg : 0; ++} ++ ++static int vr9_gphy_did_interrupt(struct phy_device *phydev) ++{ ++ int reg; ++ ++ reg = phy_read(phydev, MII_VR9_11G_ISTAT); ++ ++ return reg > 0; ++} ++ ++static int vr9_gphy_config_intr(struct phy_device *phydev) ++{ ++ int err; ++ ++ if (phydev->interrupts == PHY_INTERRUPT_ENABLED) ++ err = phy_write(phydev, MII_VR9_11G_IMASK, INT_VR9_11G_MASK); ++ else ++ err = phy_write(phydev, MII_VR9_11G_IMASK, 0); ++ ++ return err; ++} ++ ++static struct phy_driver lantiq_phy[] = { ++ { ++ .phy_id = 0xd565a400, ++ .phy_id_mask = 0xffffffff, ++ .name = "Lantiq XWAY PEF7071", ++ .features = (PHY_GBIT_FEATURES | SUPPORTED_Pause), ++ .flags = 0, /*PHY_HAS_INTERRUPT,*/ ++ .config_init = vr9_gphy_config_init, ++ .config_aneg = vr9_gphy_config_aneg, ++ .read_status = genphy_read_status, ++ .ack_interrupt = vr9_gphy_ack_interrupt, ++ .did_interrupt = vr9_gphy_did_interrupt, ++ .config_intr = vr9_gphy_config_intr, ++ .driver = { .owner = THIS_MODULE }, ++ }, { ++ .phy_id = 0x030260D0, ++ .phy_id_mask = 0xfffffff0, ++ .name = "Lantiq XWAY VR9 GPHY 11G v1.3", ++ .features = (PHY_GBIT_FEATURES | SUPPORTED_Pause), ++ .flags = 0, /*PHY_HAS_INTERRUPT,*/ ++ .config_init = vr9_gphy_config_init, ++ .config_aneg = vr9_gphy_config_aneg, ++ .read_status = genphy_read_status, ++ .ack_interrupt = vr9_gphy_ack_interrupt, ++ .did_interrupt = vr9_gphy_did_interrupt, ++ .config_intr = vr9_gphy_config_intr, ++ .driver = { .owner = THIS_MODULE }, ++ }, { ++ .phy_id = 0xd565a408, ++ .phy_id_mask = 0xfffffff8, ++ .name = "Lantiq XWAY VR9 GPHY 11G v1.4", ++ .features = (PHY_GBIT_FEATURES | SUPPORTED_Pause), ++ .flags = 0, /*PHY_HAS_INTERRUPT,*/ ++ .config_init = vr9_gphy_config_init, ++ .config_aneg = vr9_gphy_config_aneg, ++ .read_status = genphy_read_status, ++ .ack_interrupt = vr9_gphy_ack_interrupt, ++ .did_interrupt = vr9_gphy_did_interrupt, ++ .config_intr = vr9_gphy_config_intr, ++ .driver = { .owner = THIS_MODULE }, ++ }, { ++ .phy_id = 0xd565a418, ++ .phy_id_mask = 0xfffffff8, ++ .name = "Lantiq XWAY XRX PHY22F v1.4", ++ .features = (PHY_BASIC_FEATURES | SUPPORTED_Pause), ++ .flags = 0, /*PHY_HAS_INTERRUPT,*/ ++ .config_init = vr9_gphy_config_init, ++ .config_aneg = vr9_gphy_config_aneg, ++ .read_status = genphy_read_status, ++ .ack_interrupt = vr9_gphy_ack_interrupt, ++ .did_interrupt = vr9_gphy_did_interrupt, ++ .config_intr = vr9_gphy_config_intr, ++ .driver = { .owner = THIS_MODULE }, ++ }, ++}; ++ ++static int __init ltq_phy_init(void) ++{ ++ int i; ++ ++ for (i = 0; i < ARRAY_SIZE(lantiq_phy); i++) { ++ int err = phy_driver_register(&lantiq_phy[i]); ++ if (err) ++ pr_err("lantiq_phy: failed to load %s\n", lantiq_phy[i].name); ++ } ++ ++ return 0; ++} ++ ++static void __exit ltq_phy_exit(void) ++{ ++ int i; ++ ++ for (i = 0; i < ARRAY_SIZE(lantiq_phy); i++) ++ phy_driver_unregister(&lantiq_phy[i]); ++} ++ ++module_init(ltq_phy_init); ++module_exit(ltq_phy_exit); ++ ++MODULE_DESCRIPTION("Lantiq PHY drivers"); ++MODULE_AUTHOR("Daniel Schwierzeck "); ++MODULE_LICENSE("GPL"); diff --git a/target/linux/lantiq/patches-4.1/0024-NET-lantiq-adds-PHY11G-firmware-blobs.patch b/target/linux/lantiq/patches-4.1/0024-NET-lantiq-adds-PHY11G-firmware-blobs.patch new file mode 100644 index 0000000000..b69b2a900f --- /dev/null +++ b/target/linux/lantiq/patches-4.1/0024-NET-lantiq-adds-PHY11G-firmware-blobs.patch @@ -0,0 +1,364 @@ +From 77e89d5a28be35058041c79e9874ab26f222c603 Mon Sep 17 00:00:00 2001 +From: John Crispin +Date: Mon, 22 Oct 2012 09:26:24 +0200 +Subject: [PATCH 24/36] NET: lantiq: adds PHY11G firmware blobs + +Signed-off-by: John Crispin +--- + firmware/Makefile | 4 + + firmware/lantiq/COPYING | 286 +++++++++++++++++++++++++++++++++++++++++++++++ + firmware/lantiq/README | 45 ++++++++ + 3 files changed, 335 insertions(+) + create mode 100644 firmware/lantiq/COPYING + create mode 100644 firmware/lantiq/README + +--- a/firmware/Makefile ++++ b/firmware/Makefile +@@ -134,6 +134,10 @@ fw-shipped-$(CONFIG_USB_SERIAL_KEYSPAN_P + fw-shipped-$(CONFIG_USB_SERIAL_XIRCOM) += keyspan_pda/xircom_pgs.fw + fw-shipped-$(CONFIG_USB_VICAM) += vicam/firmware.fw + fw-shipped-$(CONFIG_VIDEO_CPIA2) += cpia2/stv0672_vp4.bin ++fw-shipped-$(CONFIG_LANTIQ_XRX200) += lantiq/vr9_phy11g_a1x.bin ++fw-shipped-$(CONFIG_LANTIQ_XRX200) += lantiq/vr9_phy11g_a2x.bin ++fw-shipped-$(CONFIG_LANTIQ_XRX200) += lantiq/vr9_phy22f_a1x.bin ++fw-shipped-$(CONFIG_LANTIQ_XRX200) += lantiq/vr9_phy22f_a2x.bin + fw-shipped-$(CONFIG_YAM) += yam/1200.bin yam/9600.bin + + fw-shipped-all := $(fw-shipped-y) $(fw-shipped-m) $(fw-shipped-) +--- /dev/null ++++ b/firmware/lantiq/COPYING +@@ -0,0 +1,286 @@ ++All firmware files are copyrighted by Lantiq Deutschland GmbH. ++The files have been extracted from header files found in Lantiq BSPs. ++If not stated otherwise all files are licensed under GPL. ++ ++======================================================================= ++ ++ GNU GENERAL PUBLIC LICENSE ++ Version 2, June 1991 ++ ++ Copyright (C) 1989, 1991 Free Software Foundation, Inc. ++ 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA ++ Everyone is permitted to copy and distribute verbatim copies ++ of this license document, but changing it is not allowed. ++ ++ Preamble ++ ++ The licenses for most software are designed to take away your ++freedom to share and change it. By contrast, the GNU General Public ++License is intended to guarantee your freedom to share and change free ++software--to make sure the software is free for all its users. This ++General Public License applies to most of the Free Software ++Foundation's software and to any other program whose authors commit to ++using it. (Some other Free Software Foundation software is covered by ++the GNU Library General Public License instead.) You can apply it to ++your programs, too. ++ ++ When we speak of free software, we are referring to freedom, not ++price. Our General Public Licenses are designed to make sure that you ++have the freedom to distribute copies of free software (and charge for ++this service if you wish), that you receive source code or can get it ++if you want it, that you can change the software or use pieces of it ++in new free programs; and that you know you can do these things. ++ ++ To protect your rights, we need to make restrictions that forbid ++anyone to deny you these rights or to ask you to surrender the rights. ++These restrictions translate to certain responsibilities for you if you ++distribute copies of the software, or if you modify it. ++ ++ For example, if you distribute copies of such a program, whether ++gratis or for a fee, you must give the recipients all the rights that ++you have. You must make sure that they, too, receive or can get the ++source code. And you must show them these terms so they know their ++rights. ++ ++ We protect your rights with two steps: (1) copyright the software, and ++(2) offer you this license which gives you legal permission to copy, ++distribute and/or modify the software. ++ ++ Also, for each author's protection and ours, we want to make certain ++that everyone understands that there is no warranty for this free ++software. If the software is modified by someone else and passed on, we ++want its recipients to know that what they have is not the original, so ++that any problems introduced by others will not reflect on the original ++authors' reputations. ++ ++ Finally, any free program is threatened constantly by software ++patents. We wish to avoid the danger that redistributors of a free ++program will individually obtain patent licenses, in effect making the ++program proprietary. To prevent this, we have made it clear that any ++patent must be licensed for everyone's free use or not licensed at all. ++ ++ The precise terms and conditions for copying, distribution and ++modification follow. ++ ++ GNU GENERAL PUBLIC LICENSE ++ TERMS AND CONDITIONS FOR COPYING, DISTRIBUTION AND MODIFICATION ++ ++ 0. This License applies to any program or other work which contains ++a notice placed by the copyright holder saying it may be distributed ++under the terms of this General Public License. The "Program", below, ++refers to any such program or work, and a "work based on the Program" ++means either the Program or any derivative work under copyright law: ++that is to say, a work containing the Program or a portion of it, ++either verbatim or with modifications and/or translated into another ++language. (Hereinafter, translation is included without limitation in ++the term "modification".) Each licensee is addressed as "you". ++ ++Activities other than copying, distribution and modification are not ++covered by this License; they are outside its scope. The act of ++running the Program is not restricted, and the output from the Program ++is covered only if its contents constitute a work based on the ++Program (independent of having been made by running the Program). ++Whether that is true depends on what the Program does. ++ ++ 1. You may copy and distribute verbatim copies of the Program's ++source code as you receive it, in any medium, provided that you ++conspicuously and appropriately publish on each copy an appropriate ++copyright notice and disclaimer of warranty; keep intact all the ++notices that refer to this License and to the absence of any warranty; ++and give any other recipients of the Program a copy of this License ++along with the Program. ++ ++You may charge a fee for the physical act of transferring a copy, and ++you may at your option offer warranty protection in exchange for a fee. ++ ++ 2. You may modify your copy or copies of the Program or any portion ++of it, thus forming a work based on the Program, and copy and ++distribute such modifications or work under the terms of Section 1 ++above, provided that you also meet all of these conditions: ++ ++ a) You must cause the modified files to carry prominent notices ++ stating that you changed the files and the date of any change. ++ ++ b) You must cause any work that you distribute or publish, that in ++ whole or in part contains or is derived from the Program or any ++ part thereof, to be licensed as a whole at no charge to all third ++ parties under the terms of this License. ++ ++ c) If the modified program normally reads commands interactively ++ when run, you must cause it, when started running for such ++ interactive use in the most ordinary way, to print or display an ++ announcement including an appropriate copyright notice and a ++ notice that there is no warranty (or else, saying that you provide ++ a warranty) and that users may redistribute the program under ++ these conditions, and telling the user how to view a copy of this ++ License. (Exception: if the Program itself is interactive but ++ does not normally print such an announcement, your work based on ++ the Program is not required to print an announcement.) ++ ++These requirements apply to the modified work as a whole. If ++identifiable sections of that work are not derived from the Program, ++and can be reasonably considered independent and separate works in ++themselves, then this License, and its terms, do not apply to those ++sections when you distribute them as separate works. But when you ++distribute the same sections as part of a whole which is a work based ++on the Program, the distribution of the whole must be on the terms of ++this License, whose permissions for other licensees extend to the ++entire whole, and thus to each and every part regardless of who wrote it. ++ ++Thus, it is not the intent of this section to claim rights or contest ++your rights to work written entirely by you; rather, the intent is to ++exercise the right to control the distribution of derivative or ++collective works based on the Program. ++ ++In addition, mere aggregation of another work not based on the Program ++with the Program (or with a work based on the Program) on a volume of ++a storage or distribution medium does not bring the other work under ++the scope of this License. ++ ++ 3. You may copy and distribute the Program (or a work based on it, ++under Section 2) in object code or executable form under the terms of ++Sections 1 and 2 above provided that you also do one of the following: ++ ++ a) Accompany it with the complete corresponding machine-readable ++ source code, which must be distributed under the terms of Sections ++ 1 and 2 above on a medium customarily used for software interchange; or, ++ ++ b) Accompany it with a written offer, valid for at least three ++ years, to give any third party, for a charge no more than your ++ cost of physically performing source distribution, a complete ++ machine-readable copy of the corresponding source code, to be ++ distributed under the terms of Sections 1 and 2 above on a medium ++ customarily used for software interchange; or, ++ ++ c) Accompany it with the information you received as to the offer ++ to distribute corresponding source code. (This alternative is ++ allowed only for noncommercial distribution and only if you ++ received the program in object code or executable form with such ++ an offer, in accord with Subsection b above.) ++ ++The source code for a work means the preferred form of the work for ++making modifications to it. For an executable work, complete source ++code means all the source code for all modules it contains, plus any ++associated interface definition files, plus the scripts used to ++control compilation and installation of the executable. However, as a ++special exception, the source code distributed need not include ++anything that is normally distributed (in either source or binary ++form) with the major components (compiler, kernel, and so on) of the ++operating system on which the executable runs, unless that component ++itself accompanies the executable. ++ ++If distribution of executable or object code is made by offering ++access to copy from a designated place, then offering equivalent ++access to copy the source code from the same place counts as ++distribution of the source code, even though third parties are not ++compelled to copy the source along with the object code. ++ ++ 4. You may not copy, modify, sublicense, or distribute the Program ++except as expressly provided under this License. Any attempt ++otherwise to copy, modify, sublicense or distribute the Program is ++void, and will automatically terminate your rights under this License. ++However, parties who have received copies, or rights, from you under ++this License will not have their licenses terminated so long as such ++parties remain in full compliance. ++ ++ 5. You are not required to accept this License, since you have not ++signed it. However, nothing else grants you permission to modify or ++distribute the Program or its derivative works. These actions are ++prohibited by law if you do not accept this License. Therefore, by ++modifying or distributing the Program (or any work based on the ++Program), you indicate your acceptance of this License to do so, and ++all its terms and conditions for copying, distributing or modifying ++the Program or works based on it. ++ ++ 6. Each time you redistribute the Program (or any work based on the ++Program), the recipient automatically receives a license from the ++original licensor to copy, distribute or modify the Program subject to ++these terms and conditions. You may not impose any further ++restrictions on the recipients' exercise of the rights granted herein. ++You are not responsible for enforcing compliance by third parties to ++this License. ++ ++ 7. If, as a consequence of a court judgment or allegation of patent ++infringement or for any other reason (not limited to patent issues), ++conditions are imposed on you (whether by court order, agreement or ++otherwise) that contradict the conditions of this License, they do not ++excuse you from the conditions of this License. If you cannot ++distribute so as to satisfy simultaneously your obligations under this ++License and any other pertinent obligations, then as a consequence you ++may not distribute the Program at all. For example, if a patent ++license would not permit royalty-free redistribution of the Program by ++all those who receive copies directly or indirectly through you, then ++the only way you could satisfy both it and this License would be to ++refrain entirely from distribution of the Program. ++ ++If any portion of this section is held invalid or unenforceable under ++any particular circumstance, the balance of the section is intended to ++apply and the section as a whole is intended to apply in other ++circumstances. ++ ++It is not the purpose of this section to induce you to infringe any ++patents or other property right claims or to contest validity of any ++such claims; this section has the sole purpose of protecting the ++integrity of the free software distribution system, which is ++implemented by public license practices. Many people have made ++generous contributions to the wide range of software distributed ++through that system in reliance on consistent application of that ++system; it is up to the author/donor to decide if he or she is willing ++to distribute software through any other system and a licensee cannot ++impose that choice. ++ ++This section is intended to make thoroughly clear what is believed to ++be a consequence of the rest of this License. ++ ++ 8. If the distribution and/or use of the Program is restricted in ++certain countries either by patents or by copyrighted interfaces, the ++original copyright holder who places the Program under this License ++may add an explicit geographical distribution limitation excluding ++those countries, so that distribution is permitted only in or among ++countries not thus excluded. In such case, this License incorporates ++the limitation as if written in the body of this License. ++ ++ 9. The Free Software Foundation may publish revised and/or new versions ++of the General Public License from time to time. Such new versions will ++be similar in spirit to the present version, but may differ in detail to ++address new problems or concerns. ++ ++Each version is given a distinguishing version number. If the Program ++specifies a version number of this License which applies to it and "any ++later version", you have the option of following the terms and conditions ++either of that version or of any later version published by the Free ++Software Foundation. If the Program does not specify a version number of ++this License, you may choose any version ever published by the Free Software ++Foundation. ++ ++ 10. If you wish to incorporate parts of the Program into other free ++programs whose distribution conditions are different, write to the author ++to ask for permission. For software which is copyrighted by the Free ++Software Foundation, write to the Free Software Foundation; we sometimes ++make exceptions for this. Our decision will be guided by the two goals ++of preserving the free status of all derivatives of our free software and ++of promoting the sharing and reuse of software generally. ++ ++ NO WARRANTY ++ ++ 11. BECAUSE THE PROGRAM IS LICENSED FREE OF CHARGE, THERE IS NO WARRANTY ++FOR THE PROGRAM, TO THE EXTENT PERMITTED BY APPLICABLE LAW. EXCEPT WHEN ++OTHERWISE STATED IN WRITING THE COPYRIGHT HOLDERS AND/OR OTHER PARTIES ++PROVIDE THE PROGRAM "AS IS" WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESSED ++OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF ++MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. THE ENTIRE RISK AS ++TO THE QUALITY AND PERFORMANCE OF THE PROGRAM IS WITH YOU. SHOULD THE ++PROGRAM PROVE DEFECTIVE, YOU ASSUME THE COST OF ALL NECESSARY SERVICING, ++REPAIR OR CORRECTION. ++ ++ 12. IN NO EVENT UNLESS REQUIRED BY APPLICABLE LAW OR AGREED TO IN WRITING ++WILL ANY COPYRIGHT HOLDER, OR ANY OTHER PARTY WHO MAY MODIFY AND/OR ++REDISTRIBUTE THE PROGRAM AS PERMITTED ABOVE, BE LIABLE TO YOU FOR DAMAGES, ++INCLUDING ANY GENERAL, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES ARISING ++OUT OF THE USE OR INABILITY TO USE THE PROGRAM (INCLUDING BUT NOT LIMITED ++TO LOSS OF DATA OR DATA BEING RENDERED INACCURATE OR LOSSES SUSTAINED BY ++YOU OR THIRD PARTIES OR A FAILURE OF THE PROGRAM TO OPERATE WITH ANY OTHER ++PROGRAMS), EVEN IF SUCH HOLDER OR OTHER PARTY HAS BEEN ADVISED OF THE ++POSSIBILITY OF SUCH DAMAGES. ++ ++ END OF TERMS AND CONDITIONS +--- /dev/null ++++ b/firmware/lantiq/README +@@ -0,0 +1,45 @@ ++# ++# This program is free software; you can redistribute it and/or ++# modify it under the terms of the GNU General Public License as ++# published by the Free Software Foundation; either version 2 of ++# the License, or (at your option) any later version. ++# ++# This program is distributed in the hope that it will be useful, ++# but WITHOUT ANY WARRANTY; without even the implied warranty of ++# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the ++# GNU General Public License for more details. ++# ++# You should have received a copy of the GNU General Public License ++# along with this program; if not, write to the Free Software ++# Foundation, Inc., 59 Temple Place, Suite 330, Boston, ++# MA 02111-1307 USA ++# ++# (C) Copyright 2007 - 2012 ++# Lantiq Deutschland GmbH ++# ++# (C) Copyright 2012 ++# Daniel Schwierzeck ++# ++ ++# ++# How to use ++# ++Configure kernel with: ++CONFIG_FW_LOADER=y ++CONFIG_EXTRA_FIRMWARE_DIR="FIRMWARE_DIR" ++CONFIG_EXTRA_FIRMWARE="FIRMWARE_FILES" ++ ++where FIRMWARE_DIR should point to this git tree and FIRMWARE_FILES is a list ++of space separated files from list below. ++ ++# ++# Firmware files ++# ++ ++# GPHY core on Lantiq XWAY VR9 v1.1 ++lantiq/vr9_phy11g_a1x.bin ++lantiq/vr9_phy22f_a1x.bin ++ ++# GPHY core on Lantiq XWAY VR9 v1.2 ++lantiq/vr9_phy11g_a2x.bin ++lantiq/vr9_phy22f_a2x.bin diff --git a/target/linux/lantiq/patches-4.1/0025-NET-MIPS-lantiq-adds-xrx200-net.patch b/target/linux/lantiq/patches-4.1/0025-NET-MIPS-lantiq-adds-xrx200-net.patch new file mode 100644 index 0000000000..f2a9d1bbab --- /dev/null +++ b/target/linux/lantiq/patches-4.1/0025-NET-MIPS-lantiq-adds-xrx200-net.patch @@ -0,0 +1,3339 @@ +From fb0c9601f4414c39ff68e26b88681bef0bb04954 Mon Sep 17 00:00:00 2001 +From: John Crispin +Date: Mon, 22 Oct 2012 12:22:23 +0200 +Subject: [PATCH 25/36] NET: MIPS: lantiq: adds xrx200-net + +--- + drivers/net/ethernet/Kconfig | 8 +- + drivers/net/ethernet/Makefile | 1 + + drivers/net/ethernet/lantiq_pce.h | 163 +++ + drivers/net/ethernet/lantiq_xrx200.c | 1798 +++++++++++++++++++++++++++++++ + drivers/net/ethernet/lantiq_xrx200_sw.h | 1328 +++++++++++++++++++++++ + 5 files changed, 3297 insertions(+), 1 deletion(-) + create mode 100644 drivers/net/ethernet/lantiq_pce.h + create mode 100644 drivers/net/ethernet/lantiq_xrx200.c + create mode 100644 drivers/net/ethernet/lantiq_xrx200_sw.h + +--- a/drivers/net/ethernet/Kconfig ++++ b/drivers/net/ethernet/Kconfig +@@ -101,7 +101,13 @@ config LANTIQ_ETOP + tristate "Lantiq SoC ETOP driver" + depends on SOC_TYPE_XWAY + ---help--- +- Support for the MII0 inside the Lantiq SoC ++ Support for the MII0 inside the Lantiq ADSL SoC ++ ++config LANTIQ_XRX200 ++ tristate "Lantiq SoC XRX200 driver" ++ depends on SOC_TYPE_XWAY ++ ---help--- ++ Support for the MII0 inside the Lantiq VDSL SoC + + source "drivers/net/ethernet/marvell/Kconfig" + source "drivers/net/ethernet/mellanox/Kconfig" +--- a/drivers/net/ethernet/Makefile ++++ b/drivers/net/ethernet/Makefile +@@ -43,6 +43,7 @@ obj-$(CONFIG_IP1000) += icplus/ + obj-$(CONFIG_JME) += jme.o + obj-$(CONFIG_KORINA) += korina.o + obj-$(CONFIG_LANTIQ_ETOP) += lantiq_etop.o ++obj-$(CONFIG_LANTIQ_XRX200) += lantiq_xrx200.o + obj-$(CONFIG_NET_VENDOR_MARVELL) += marvell/ + obj-$(CONFIG_NET_VENDOR_MELLANOX) += mellanox/ + obj-$(CONFIG_NET_VENDOR_MICREL) += micrel/ +--- /dev/null ++++ b/drivers/net/ethernet/lantiq_pce.h +@@ -0,0 +1,163 @@ ++/* ++ * This program is free software; you can redistribute it and/or modify it ++ * under the terms of the GNU General Public License version 2 as published ++ * by the Free Software Foundation. ++ * ++ * This program is distributed in the hope that it will be useful, ++ * but WITHOUT ANY WARRANTY; without even the implied warranty of ++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the ++ * GNU General Public License for more details. ++ * ++ * You should have received a copy of the GNU General Public License ++ * along with this program; if not, write to the Free Software ++ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307, USA. ++ * ++ * Copyright (C) 2010 Lantiq Deutschland GmbH ++ * Copyright (C) 2012 John Crispin ++ * ++ * PCE microcode extracted from UGW5.2 switch api ++ */ ++ ++/* Switch API Micro Code V0.3 */ ++enum { ++ OUT_MAC0 = 0, ++ OUT_MAC1, ++ OUT_MAC2, ++ OUT_MAC3, ++ OUT_MAC4, ++ OUT_MAC5, ++ OUT_ETHTYP, ++ OUT_VTAG0, ++ OUT_VTAG1, ++ OUT_ITAG0, ++ OUT_ITAG1, /*10 */ ++ OUT_ITAG2, ++ OUT_ITAG3, ++ OUT_IP0, ++ OUT_IP1, ++ OUT_IP2, ++ OUT_IP3, ++ OUT_SIP0, ++ OUT_SIP1, ++ OUT_SIP2, ++ OUT_SIP3, /*20*/ ++ OUT_SIP4, ++ OUT_SIP5, ++ OUT_SIP6, ++ OUT_SIP7, ++ OUT_DIP0, ++ OUT_DIP1, ++ OUT_DIP2, ++ OUT_DIP3, ++ OUT_DIP4, ++ OUT_DIP5, /*30*/ ++ OUT_DIP6, ++ OUT_DIP7, ++ OUT_SESID, ++ OUT_PROT, ++ OUT_APP0, ++ OUT_APP1, ++ OUT_IGMP0, ++ OUT_IGMP1, ++ OUT_IPOFF, /*39*/ ++ OUT_NONE = 63 ++}; ++ ++/* parser's microcode length type */ ++#define INSTR 0 ++#define IPV6 1 ++#define LENACCU 2 ++ ++/* parser's microcode flag type */ ++enum { ++ FLAG_ITAG = 0, ++ FLAG_VLAN, ++ FLAG_SNAP, ++ FLAG_PPPOE, ++ FLAG_IPV6, ++ FLAG_IPV6FL, ++ FLAG_IPV4, ++ FLAG_IGMP, ++ FLAG_TU, ++ FLAG_HOP, ++ FLAG_NN1, /*10 */ ++ FLAG_NN2, ++ FLAG_END, ++ FLAG_NO, /*13*/ ++}; ++ ++/* Micro code version V2_11 (extension for parsing IPv6 in PPPoE) */ ++#define MC_ENTRY(val, msk, ns, out, len, type, flags, ipv4_len) \ ++ { {val, msk, (ns<<10 | out<<4 | len>>1), (len&1)<<15 | type<<13 | flags<<9 | ipv4_len<<8 }} ++struct pce_microcode { ++ unsigned short val[4]; ++/* unsigned short val_2; ++ unsigned short val_1; ++ unsigned short val_0;*/ ++} pce_microcode[] = { ++ /* value mask ns fields L type flags ipv4_len */ ++ MC_ENTRY(0x88c3, 0xFFFF, 1, OUT_ITAG0, 4, INSTR, FLAG_ITAG, 0), ++ MC_ENTRY(0x8100, 0xFFFF, 2, OUT_VTAG0, 2, INSTR, FLAG_VLAN, 0), ++ MC_ENTRY(0x88A8, 0xFFFF, 1, OUT_VTAG0, 2, INSTR, FLAG_VLAN, 0), ++ MC_ENTRY(0x8100, 0xFFFF, 1, OUT_VTAG0, 2, INSTR, FLAG_VLAN, 0), ++ MC_ENTRY(0x8864, 0xFFFF, 17, OUT_ETHTYP, 1, INSTR, FLAG_NO, 0), ++ MC_ENTRY(0x0800, 0xFFFF, 21, OUT_ETHTYP, 1, INSTR, FLAG_NO, 0), ++ MC_ENTRY(0x86DD, 0xFFFF, 22, OUT_ETHTYP, 1, INSTR, FLAG_NO, 0), ++ MC_ENTRY(0x8863, 0xFFFF, 16, OUT_ETHTYP, 1, INSTR, FLAG_NO, 0), ++ MC_ENTRY(0x0000, 0xF800, 10, OUT_NONE, 0, INSTR, FLAG_NO, 0), ++ MC_ENTRY(0x0000, 0x0000, 38, OUT_ETHTYP, 1, INSTR, FLAG_NO, 0), ++ MC_ENTRY(0x0600, 0x0600, 38, OUT_ETHTYP, 1, INSTR, FLAG_NO, 0), ++ MC_ENTRY(0x0000, 0x0000, 12, OUT_NONE, 1, INSTR, FLAG_NO, 0), ++ MC_ENTRY(0xAAAA, 0xFFFF, 14, OUT_NONE, 1, INSTR, FLAG_NO, 0), ++ MC_ENTRY(0x0000, 0x0000, 39, OUT_NONE, 0, INSTR, FLAG_NO, 0), ++ MC_ENTRY(0x0300, 0xFF00, 39, OUT_NONE, 0, INSTR, FLAG_SNAP, 0), ++ MC_ENTRY(0x0000, 0x0000, 39, OUT_NONE, 0, INSTR, FLAG_NO, 0), ++ MC_ENTRY(0x0000, 0x0000, 39, OUT_DIP7, 3, INSTR, FLAG_NO, 0), ++ MC_ENTRY(0x0000, 0x0000, 18, OUT_DIP7, 3, INSTR, FLAG_PPPOE, 0), ++ MC_ENTRY(0x0021, 0xFFFF, 21, OUT_NONE, 1, INSTR, FLAG_NO, 0), ++ MC_ENTRY(0x0057, 0xFFFF, 22, OUT_NONE, 1, INSTR, FLAG_NO, 0), ++ MC_ENTRY(0x0000, 0x0000, 39, OUT_NONE, 0, INSTR, FLAG_NO, 0), ++ MC_ENTRY(0x4000, 0xF000, 24, OUT_IP0, 4, INSTR, FLAG_IPV4, 1), ++ MC_ENTRY(0x6000, 0xF000, 27, OUT_IP0, 3, INSTR, FLAG_IPV6, 0), ++ MC_ENTRY(0x0000, 0x0000, 39, OUT_NONE, 0, INSTR, FLAG_NO, 0), ++ MC_ENTRY(0x0000, 0x0000, 25, OUT_IP3, 2, INSTR, FLAG_NO, 0), ++ MC_ENTRY(0x0000, 0x0000, 26, OUT_SIP0, 4, INSTR, FLAG_NO, 0), ++ MC_ENTRY(0x0000, 0x0000, 38, OUT_NONE, 0, LENACCU, FLAG_NO, 0), ++ MC_ENTRY(0x1100, 0xFF00, 37, OUT_PROT, 1, INSTR, FLAG_NO, 0), ++ MC_ENTRY(0x0600, 0xFF00, 37, OUT_PROT, 1, INSTR, FLAG_NO, 0), ++ MC_ENTRY(0x0000, 0xFF00, 33, OUT_IP3, 17, INSTR, FLAG_HOP, 0), ++ MC_ENTRY(0x2B00, 0xFF00, 33, OUT_IP3, 17, INSTR, FLAG_NN1, 0), ++ MC_ENTRY(0x3C00, 0xFF00, 33, OUT_IP3, 17, INSTR, FLAG_NN2, 0), ++ MC_ENTRY(0x0000, 0x0000, 37, OUT_PROT, 1, INSTR, FLAG_NO, 0), ++ MC_ENTRY(0x0000, 0xFF00, 33, OUT_NONE, 0, IPV6, FLAG_HOP, 0), ++ MC_ENTRY(0x2B00, 0xFF00, 33, OUT_NONE, 0, IPV6, FLAG_NN1, 0), ++ MC_ENTRY(0x3C00, 0xFF00, 33, OUT_NONE, 0, IPV6, FLAG_NN2, 0), ++ MC_ENTRY(0x0000, 0x0000, 38, OUT_PROT, 1, IPV6, FLAG_NO, 0), ++ MC_ENTRY(0x0000, 0x0000, 38, OUT_SIP0, 16, INSTR, FLAG_NO, 0), ++ MC_ENTRY(0x0000, 0x0000, 39, OUT_APP0, 4, INSTR, FLAG_IGMP, 0), ++ MC_ENTRY(0x0000, 0x0000, 39, OUT_NONE, 0, INSTR, FLAG_END, 0), ++ MC_ENTRY(0x0000, 0x0000, 39, OUT_NONE, 0, INSTR, FLAG_END, 0), ++ MC_ENTRY(0x0000, 0x0000, 39, OUT_NONE, 0, INSTR, FLAG_END, 0), ++ MC_ENTRY(0x0000, 0x0000, 39, OUT_NONE, 0, INSTR, FLAG_END, 0), ++ MC_ENTRY(0x0000, 0x0000, 39, OUT_NONE, 0, INSTR, FLAG_END, 0), ++ MC_ENTRY(0x0000, 0x0000, 39, OUT_NONE, 0, INSTR, FLAG_END, 0), ++ MC_ENTRY(0x0000, 0x0000, 39, OUT_NONE, 0, INSTR, FLAG_END, 0), ++ MC_ENTRY(0x0000, 0x0000, 39, OUT_NONE, 0, INSTR, FLAG_END, 0), ++ MC_ENTRY(0x0000, 0x0000, 39, OUT_NONE, 0, INSTR, FLAG_END, 0), ++ MC_ENTRY(0x0000, 0x0000, 39, OUT_NONE, 0, INSTR, FLAG_END, 0), ++ MC_ENTRY(0x0000, 0x0000, 39, OUT_NONE, 0, INSTR, FLAG_END, 0), ++ MC_ENTRY(0x0000, 0x0000, 39, OUT_NONE, 0, INSTR, FLAG_END, 0), ++ MC_ENTRY(0x0000, 0x0000, 39, OUT_NONE, 0, INSTR, FLAG_END, 0), ++ MC_ENTRY(0x0000, 0x0000, 39, OUT_NONE, 0, INSTR, FLAG_END, 0), ++ MC_ENTRY(0x0000, 0x0000, 39, OUT_NONE, 0, INSTR, FLAG_END, 0), ++ MC_ENTRY(0x0000, 0x0000, 39, OUT_NONE, 0, INSTR, FLAG_END, 0), ++ MC_ENTRY(0x0000, 0x0000, 39, OUT_NONE, 0, INSTR, FLAG_END, 0), ++ MC_ENTRY(0x0000, 0x0000, 39, OUT_NONE, 0, INSTR, FLAG_END, 0), ++ MC_ENTRY(0x0000, 0x0000, 39, OUT_NONE, 0, INSTR, FLAG_END, 0), ++ MC_ENTRY(0x0000, 0x0000, 39, OUT_NONE, 0, INSTR, FLAG_END, 0), ++ MC_ENTRY(0x0000, 0x0000, 39, OUT_NONE, 0, INSTR, FLAG_END, 0), ++ MC_ENTRY(0x0000, 0x0000, 39, OUT_NONE, 0, INSTR, FLAG_END, 0), ++ MC_ENTRY(0x0000, 0x0000, 39, OUT_NONE, 0, INSTR, FLAG_END, 0), ++ MC_ENTRY(0x0000, 0x0000, 39, OUT_NONE, 0, INSTR, FLAG_END, 0), ++ MC_ENTRY(0x0000, 0x0000, 39, OUT_NONE, 0, INSTR, FLAG_END, 0), ++}; +--- /dev/null ++++ b/drivers/net/ethernet/lantiq_xrx200.c +@@ -0,0 +1,1796 @@ ++/* ++ * This program is free software; you can redistribute it and/or modify it ++ * under the terms of the GNU General Public License version 2 as published ++ * by the Free Software Foundation. ++ * ++ * This program is distributed in the hope that it will be useful, ++ * but WITHOUT ANY WARRANTY; without even the implied warranty of ++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the ++ * GNU General Public License for more details. ++ * ++ * You should have received a copy of the GNU General Public License ++ * along with this program; if not, write to the Free Software ++ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307, USA. ++ * ++ * Copyright (C) 2010 Lantiq Deutschland ++ * Copyright (C) 2012 John Crispin ++ */ ++ ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++ ++#include ++#include ++#include ++ ++#include ++#include ++ ++#include "lantiq_pce.h" ++#include "lantiq_xrx200_sw.h" ++ ++#define SW_POLLING ++#define SW_ROUTING ++#define SW_PORTMAP ++ ++#ifdef SW_ROUTING ++ #ifdef SW_PORTMAP ++#define XRX200_MAX_DEV 2 ++ #else ++#define XRX200_MAX_DEV 2 ++ #endif ++#else ++#define XRX200_MAX_DEV 1 ++#endif ++ ++#define XRX200_MAX_VLAN 64 ++#define XRX200_PCE_ACTVLAN_IDX 0x01 ++#define XRX200_PCE_VLANMAP_IDX 0x02 ++ ++#define XRX200_MAX_PORT 7 ++#define XRX200_MAX_DMA 8 ++ ++#define XRX200_HEADROOM 4 ++ ++#define XRX200_TX_TIMEOUT (10 * HZ) ++ ++/* port type */ ++#define XRX200_PORT_TYPE_PHY 1 ++#define XRX200_PORT_TYPE_MAC 2 ++ ++/* DMA */ ++#define XRX200_DMA_DATA_LEN 0x600 ++#define XRX200_DMA_IRQ INT_NUM_IM2_IRL0 ++#define XRX200_DMA_RX 0 ++#define XRX200_DMA_TX 1 ++#define XRX200_DMA_IS_TX(x) (x%2) ++#define XRX200_DMA_IS_RX(x) (!XRX200_DMA_IS_TX(x)) ++ ++/* fetch / store dma */ ++#define FDMA_PCTRL0 0x2A00 ++#define FDMA_PCTRLx(x) (FDMA_PCTRL0 + (x * 0x18)) ++#define SDMA_PCTRL0 0x2F00 ++#define SDMA_PCTRLx(x) (SDMA_PCTRL0 + (x * 0x18)) ++ ++/* buffer management */ ++#define BM_PCFG0 0x200 ++#define BM_PCFGx(x) (BM_PCFG0 + (x * 8)) ++ ++/* MDIO */ ++#define MDIO_GLOB 0x0000 ++#define MDIO_CTRL 0x0020 ++#define MDIO_READ 0x0024 ++#define MDIO_WRITE 0x0028 ++#define MDIO_PHY0 0x0054 ++#define MDIO_PHY(x) (0x0054 - (x * sizeof(unsigned))) ++#define MDIO_CLK_CFG0 0x002C ++#define MDIO_CLK_CFG1 0x0030 ++ ++#define MDIO_GLOB_ENABLE 0x8000 ++#define MDIO_BUSY BIT(12) ++#define MDIO_RD BIT(11) ++#define MDIO_WR BIT(10) ++#define MDIO_MASK 0x1f ++#define MDIO_ADDRSHIFT 5 ++#define MDIO1_25MHZ 9 ++ ++#define MDIO_PHY_LINK_DOWN 0x4000 ++#define MDIO_PHY_LINK_UP 0x2000 ++ ++#define MDIO_PHY_SPEED_M10 0x0000 ++#define MDIO_PHY_SPEED_M100 0x0800 ++#define MDIO_PHY_SPEED_G1 0x1000 ++ ++#define MDIO_PHY_FDUP_EN 0x0200 ++#define MDIO_PHY_FDUP_DIS 0x0600 ++ ++#define MDIO_PHY_LINK_MASK 0x6000 ++#define MDIO_PHY_SPEED_MASK 0x1800 ++#define MDIO_PHY_FDUP_MASK 0x0600 ++#define MDIO_PHY_ADDR_MASK 0x001f ++#define MDIO_UPDATE_MASK MDIO_PHY_ADDR_MASK | MDIO_PHY_LINK_MASK | \ ++ MDIO_PHY_SPEED_MASK | MDIO_PHY_FDUP_MASK ++ ++/* MII */ ++#define MII_CFG(p) (p * 8) ++ ++#define MII_CFG_EN BIT(14) ++ ++#define MII_CFG_MODE_MIIP 0x0 ++#define MII_CFG_MODE_MIIM 0x1 ++#define MII_CFG_MODE_RMIIP 0x2 ++#define MII_CFG_MODE_RMIIM 0x3 ++#define MII_CFG_MODE_RGMII 0x4 ++#define MII_CFG_MODE_MASK 0xf ++ ++#define MII_CFG_RATE_M2P5 0x00 ++#define MII_CFG_RATE_M25 0x10 ++#define MII_CFG_RATE_M125 0x20 ++#define MII_CFG_RATE_M50 0x30 ++#define MII_CFG_RATE_AUTO 0x40 ++#define MII_CFG_RATE_MASK 0x70 ++ ++/* cpu port mac */ ++#define PMAC_HD_CTL 0x0000 ++#define PMAC_RX_IPG 0x0024 ++#define PMAC_EWAN 0x002c ++ ++#define PMAC_IPG_MASK 0xf ++#define PMAC_HD_CTL_AS 0x0008 ++#define PMAC_HD_CTL_AC 0x0004 ++#define PMAC_HD_CTL_RXSH 0x0040 ++#define PMAC_HD_CTL_AST 0x0080 ++#define PMAC_HD_CTL_RST 0x0100 ++ ++/* PCE */ ++#define PCE_TBL_KEY(x) (0x1100 + ((7 - x) * 4)) ++#define PCE_TBL_MASK 0x1120 ++#define PCE_TBL_VAL(x) (0x1124 + ((4 - x) * 4)) ++#define PCE_TBL_ADDR 0x1138 ++#define PCE_TBL_CTRL 0x113c ++#define PCE_PMAP1 0x114c ++#define PCE_PMAP2 0x1150 ++#define PCE_PMAP3 0x1154 ++#define PCE_GCTRL_REG(x) (0x1158 + (x * 4)) ++#define PCE_PCTRL_REG(p, x) (0x1200 + (((p * 0xa) + x) * 4)) ++ ++#define PCE_TBL_BUSY BIT(15) ++#define PCE_TBL_CFG_ADDR_MASK 0x1f ++#define PCE_TBL_CFG_ADWR 0x20 ++#define PCE_TBL_CFG_ADWR_MASK 0x60 ++#define PCE_INGRESS BIT(11) ++ ++/* MAC */ ++#define MAC_FLEN_REG (0x2314) ++#define MAC_CTRL_REG(p, x) (0x240c + (((p * 0xc) + x) * 4)) ++ ++/* buffer management */ ++#define BM_PCFG(p) (0x200 + (p * 8)) ++ ++/* special tag in TX path header */ ++#define SPID_SHIFT 24 ++#define DPID_SHIFT 16 ++#define DPID_ENABLE 1 ++#define SPID_CPU_PORT 2 ++#define PORT_MAP_SEL BIT(15) ++#define PORT_MAP_EN BIT(14) ++#define PORT_MAP_SHIFT 1 ++#define PORT_MAP_MASK 0x3f ++ ++#define SPPID_MASK 0x7 ++#define SPPID_SHIFT 4 ++ ++/* MII regs not yet in linux */ ++#define MDIO_DEVAD_NONE (-1) ++#define ADVERTIZE_MPD (1 << 10) ++ ++struct xrx200_port { ++ u8 num; ++ u8 phy_addr; ++ u16 flags; ++ phy_interface_t phy_if; ++ ++ int link; ++ int gpio; ++ enum of_gpio_flags gpio_flags; ++ ++ struct phy_device *phydev; ++ struct device_node *phy_node; ++}; ++ ++struct xrx200_chan { ++ int idx; ++ int refcount; ++ int tx_free; ++ ++ struct net_device dummy_dev; ++ struct net_device *devs[XRX200_MAX_DEV]; ++ ++ struct tasklet_struct tasklet; ++ struct napi_struct napi; ++ struct ltq_dma_channel dma; ++ struct sk_buff *skb[LTQ_DESC_NUM]; ++}; ++ ++struct xrx200_hw { ++ struct clk *clk; ++ struct mii_bus *mii_bus; ++ ++ struct xrx200_chan chan[XRX200_MAX_DMA]; ++ ++ struct net_device *devs[XRX200_MAX_DEV]; ++ int num_devs; ++ ++ int port_map[XRX200_MAX_PORT]; ++ unsigned short wan_map; ++ ++ spinlock_t lock; ++ ++ struct switch_dev swdev; ++}; ++ ++struct xrx200_priv { ++ struct net_device_stats stats; ++ int id; ++ ++ struct xrx200_port port[XRX200_MAX_PORT]; ++ int num_port; ++ bool wan; ++ bool sw; ++ unsigned short port_map; ++ unsigned char mac[6]; ++ ++ struct xrx200_hw *hw; ++}; ++ ++static __iomem void *xrx200_switch_membase; ++static __iomem void *xrx200_mii_membase; ++static __iomem void *xrx200_mdio_membase; ++static __iomem void *xrx200_pmac_membase; ++ ++#define ltq_switch_r32(x) ltq_r32(xrx200_switch_membase + (x)) ++#define ltq_switch_w32(x, y) ltq_w32(x, xrx200_switch_membase + (y)) ++#define ltq_switch_w32_mask(x, y, z) \ ++ ltq_w32_mask(x, y, xrx200_switch_membase + (z)) ++ ++#define ltq_mdio_r32(x) ltq_r32(xrx200_mdio_membase + (x)) ++#define ltq_mdio_w32(x, y) ltq_w32(x, xrx200_mdio_membase + (y)) ++#define ltq_mdio_w32_mask(x, y, z) \ ++ ltq_w32_mask(x, y, xrx200_mdio_membase + (z)) ++ ++#define ltq_mii_r32(x) ltq_r32(xrx200_mii_membase + (x)) ++#define ltq_mii_w32(x, y) ltq_w32(x, xrx200_mii_membase + (y)) ++#define ltq_mii_w32_mask(x, y, z) \ ++ ltq_w32_mask(x, y, xrx200_mii_membase + (z)) ++ ++#define ltq_pmac_r32(x) ltq_r32(xrx200_pmac_membase + (x)) ++#define ltq_pmac_w32(x, y) ltq_w32(x, xrx200_pmac_membase + (y)) ++#define ltq_pmac_w32_mask(x, y, z) \ ++ ltq_w32_mask(x, y, xrx200_pmac_membase + (z)) ++ ++#define XRX200_GLOBAL_REGATTR(reg) \ ++ .id = reg, \ ++ .type = SWITCH_TYPE_INT, \ ++ .set = xrx200_set_global_attr, \ ++ .get = xrx200_get_global_attr ++ ++#define XRX200_PORT_REGATTR(reg) \ ++ .id = reg, \ ++ .type = SWITCH_TYPE_INT, \ ++ .set = xrx200_set_port_attr, \ ++ .get = xrx200_get_port_attr ++ ++static int xrx200sw_read_x(int reg, int x) ++{ ++ int value, mask, addr; ++ ++ addr = xrx200sw_reg[reg].offset + (xrx200sw_reg[reg].mult * x); ++ value = ltq_switch_r32(addr); ++ mask = (1 << xrx200sw_reg[reg].size) - 1; ++ value = (value >> xrx200sw_reg[reg].shift); ++ ++ return (value & mask); ++} ++ ++static int xrx200sw_read(int reg) ++{ ++ return xrx200sw_read_x(reg, 0); ++} ++ ++static void xrx200sw_write_x(int value, int reg, int x) ++{ ++ int mask, addr; ++ ++ addr = xrx200sw_reg[reg].offset + (xrx200sw_reg[reg].mult * x); ++ mask = (1 << xrx200sw_reg[reg].size) - 1; ++ mask = (mask << xrx200sw_reg[reg].shift); ++ value = (value << xrx200sw_reg[reg].shift) & mask; ++ ++ ltq_switch_w32_mask(mask, value, addr); ++} ++ ++static void xrx200sw_write(int value, int reg) ++{ ++ xrx200sw_write_x(value, reg, 0); ++} ++ ++struct xrx200_pce_table_entry { ++ int index; // PCE_TBL_ADDR.ADDR = pData->table_index ++ int table; // PCE_TBL_CTRL.ADDR = pData->table ++ unsigned short key[8]; ++ unsigned short val[5]; ++ unsigned short mask; ++ unsigned short type; ++ unsigned short valid; ++ unsigned short gmap; ++}; ++ ++static int xrx200_pce_table_entry_read(struct xrx200_pce_table_entry *tbl) ++{ ++ // wait until hardware is ready ++ while (xrx200sw_read(XRX200_PCE_TBL_CTRL_BAS)) {}; ++ ++ // prepare the table access: ++ // PCE_TBL_ADDR.ADDR = pData->table_index ++ xrx200sw_write(tbl->index, XRX200_PCE_TBL_ADDR_ADDR); ++ // PCE_TBL_CTRL.ADDR = pData->table ++ xrx200sw_write(tbl->table, XRX200_PCE_TBL_CTRL_ADDR); ++ ++ //(address-based read) ++ xrx200sw_write(0, XRX200_PCE_TBL_CTRL_OPMOD); // OPMOD_ADRD ++ ++ xrx200sw_write(1, XRX200_PCE_TBL_CTRL_BAS); // start access ++ ++ // wait until hardware is ready ++ while (xrx200sw_read(XRX200_PCE_TBL_CTRL_BAS)) {}; ++ ++ // read the keys ++ tbl->key[7] = xrx200sw_read(XRX200_PCE_TBL_KEY_7); ++ tbl->key[6] = xrx200sw_read(XRX200_PCE_TBL_KEY_6); ++ tbl->key[5] = xrx200sw_read(XRX200_PCE_TBL_KEY_5); ++ tbl->key[4] = xrx200sw_read(XRX200_PCE_TBL_KEY_4); ++ tbl->key[3] = xrx200sw_read(XRX200_PCE_TBL_KEY_3); ++ tbl->key[2] = xrx200sw_read(XRX200_PCE_TBL_KEY_2); ++ tbl->key[1] = xrx200sw_read(XRX200_PCE_TBL_KEY_1); ++ tbl->key[0] = xrx200sw_read(XRX200_PCE_TBL_KEY_0); ++ ++ // read the values ++ tbl->val[4] = xrx200sw_read(XRX200_PCE_TBL_VAL_4); ++ tbl->val[3] = xrx200sw_read(XRX200_PCE_TBL_VAL_3); ++ tbl->val[2] = xrx200sw_read(XRX200_PCE_TBL_VAL_2); ++ tbl->val[1] = xrx200sw_read(XRX200_PCE_TBL_VAL_1); ++ tbl->val[0] = xrx200sw_read(XRX200_PCE_TBL_VAL_0); ++ ++ // read the mask ++ tbl->mask = xrx200sw_read(XRX200_PCE_TBL_MASK_0); ++ // read the type ++ tbl->type = xrx200sw_read(XRX200_PCE_TBL_CTRL_TYPE); ++ // read the valid flag ++ tbl->valid = xrx200sw_read(XRX200_PCE_TBL_CTRL_VLD); ++ // read the group map ++ tbl->gmap = xrx200sw_read(XRX200_PCE_TBL_CTRL_GMAP); ++ ++ return 0; ++} ++ ++static int xrx200_pce_table_entry_write(struct xrx200_pce_table_entry *tbl) ++{ ++ // wait until hardware is ready ++ while (xrx200sw_read(XRX200_PCE_TBL_CTRL_BAS)) {}; ++ ++ // prepare the table access: ++ // PCE_TBL_ADDR.ADDR = pData->table_index ++ xrx200sw_write(tbl->index, XRX200_PCE_TBL_ADDR_ADDR); ++ // PCE_TBL_CTRL.ADDR = pData->table ++ xrx200sw_write(tbl->table, XRX200_PCE_TBL_CTRL_ADDR); ++ ++ //(address-based write) ++ xrx200sw_write(1, XRX200_PCE_TBL_CTRL_OPMOD); // OPMOD_ADRD ++ ++ // read the keys ++ xrx200sw_write(tbl->key[7], XRX200_PCE_TBL_KEY_7); ++ xrx200sw_write(tbl->key[6], XRX200_PCE_TBL_KEY_6); ++ xrx200sw_write(tbl->key[5], XRX200_PCE_TBL_KEY_5); ++ xrx200sw_write(tbl->key[4], XRX200_PCE_TBL_KEY_4); ++ xrx200sw_write(tbl->key[3], XRX200_PCE_TBL_KEY_3); ++ xrx200sw_write(tbl->key[2], XRX200_PCE_TBL_KEY_2); ++ xrx200sw_write(tbl->key[1], XRX200_PCE_TBL_KEY_1); ++ xrx200sw_write(tbl->key[0], XRX200_PCE_TBL_KEY_0); ++ ++ // read the values ++ xrx200sw_write(tbl->val[4], XRX200_PCE_TBL_VAL_4); ++ xrx200sw_write(tbl->val[3], XRX200_PCE_TBL_VAL_3); ++ xrx200sw_write(tbl->val[2], XRX200_PCE_TBL_VAL_2); ++ xrx200sw_write(tbl->val[1], XRX200_PCE_TBL_VAL_1); ++ xrx200sw_write(tbl->val[0], XRX200_PCE_TBL_VAL_0); ++ ++ // read the mask ++ xrx200sw_write(tbl->mask, XRX200_PCE_TBL_MASK_0); ++ // read the type ++ xrx200sw_write(tbl->type, XRX200_PCE_TBL_CTRL_TYPE); ++ // read the valid flag ++ xrx200sw_write(tbl->valid, XRX200_PCE_TBL_CTRL_VLD); ++ // read the group map ++ xrx200sw_write(tbl->gmap, XRX200_PCE_TBL_CTRL_GMAP); ++ ++ xrx200sw_write(1, XRX200_PCE_TBL_CTRL_BAS); // start access ++ ++ // wait until hardware is ready ++ while (xrx200sw_read(XRX200_PCE_TBL_CTRL_BAS)) {}; ++ ++ return 0; ++} ++ ++static void xrx200sw_fixup_pvids(void) ++{ ++ int index, p, portmap, untagged; ++ struct xrx200_pce_table_entry tem; ++ struct xrx200_pce_table_entry tev; ++ ++ portmap = 0; ++ for (p = 0; p < XRX200_MAX_PORT; p++) ++ portmap |= BIT(p); ++ ++ tem.table = XRX200_PCE_VLANMAP_IDX; ++ tev.table = XRX200_PCE_ACTVLAN_IDX; ++ ++ for (index = XRX200_MAX_VLAN; index-- > 0;) ++ { ++ tev.index = index; ++ xrx200_pce_table_entry_read(&tev); ++ ++ if (tev.valid == 0) ++ continue; ++ ++ tem.index = index; ++ xrx200_pce_table_entry_read(&tem); ++ ++ if (tem.val[0] == 0) ++ continue; ++ ++ untagged = portmap & (tem.val[1] ^ tem.val[2]); ++ ++ for (p = 0; p < XRX200_MAX_PORT; p++) ++ if (untagged & BIT(p)) ++ { ++ portmap &= ~BIT(p); ++ xrx200sw_write_x(index, XRX200_PCE_DEFPVID_PVID, p); ++ } ++ ++ for (p = 0; p < XRX200_MAX_PORT; p++) ++ if (portmap & BIT(p)) ++ xrx200sw_write_x(index, XRX200_PCE_DEFPVID_PVID, p); ++ } ++} ++ ++// swconfig interface ++static void xrx200_hw_init(struct xrx200_hw *hw); ++ ++// global ++static int xrx200sw_reset_switch(struct switch_dev *dev) ++{ ++ struct xrx200_hw *hw = container_of(dev, struct xrx200_hw, swdev); ++ ++ xrx200_hw_init(hw); ++ ++ return 0; ++} ++ ++static int xrx200_set_vlan_mode_enable(struct switch_dev *dev, const struct switch_attr *attr, struct switch_val *val) ++{ ++ int p; ++ ++ if ((attr->max > 0) && (val->value.i > attr->max)) ++ return -EINVAL; ++ ++ for (p = 0; p < XRX200_MAX_PORT; p++) { ++ xrx200sw_write_x(val->value.i, XRX200_PCE_VCTRL_VEMR, p); ++ xrx200sw_write_x(val->value.i, XRX200_PCE_VCTRL_VIMR, p); ++ } ++ ++ xrx200sw_write(val->value.i, XRX200_PCE_GCTRL_0_VLAN); ++ return 0; ++} ++ ++static int xrx200_get_vlan_mode_enable(struct switch_dev *dev, const struct switch_attr *attr, struct switch_val *val) ++{ ++ val->value.i = xrx200sw_read(attr->id); ++ return 0; ++} ++ ++static int xrx200_set_global_attr(struct switch_dev *dev, const struct switch_attr *attr, struct switch_val *val) ++{ ++ if ((attr->max > 0) && (val->value.i > attr->max)) ++ return -EINVAL; ++ ++ xrx200sw_write(val->value.i, attr->id); ++ return 0; ++} ++ ++static int xrx200_get_global_attr(struct switch_dev *dev, const struct switch_attr *attr, struct switch_val *val) ++{ ++ val->value.i = xrx200sw_read(attr->id); ++ return 0; ++} ++ ++// vlan ++static int xrx200sw_set_vlan_vid(struct switch_dev *dev, const struct switch_attr *attr, ++ struct switch_val *val) ++{ ++ int i; ++ struct xrx200_pce_table_entry tev; ++ struct xrx200_pce_table_entry tem; ++ ++ tev.table = XRX200_PCE_ACTVLAN_IDX; ++ ++ for (i = 0; i < XRX200_MAX_VLAN; i++) ++ { ++ tev.index = i; ++ xrx200_pce_table_entry_read(&tev); ++ if (tev.key[0] == val->value.i && i != val->port_vlan) ++ return -EINVAL; ++ } ++ ++ tev.index = val->port_vlan; ++ xrx200_pce_table_entry_read(&tev); ++ tev.key[0] = val->value.i; ++ tev.valid = val->value.i > 0; ++ xrx200_pce_table_entry_write(&tev); ++ ++ tem.table = XRX200_PCE_VLANMAP_IDX; ++ tem.index = val->port_vlan; ++ xrx200_pce_table_entry_read(&tem); ++ tem.val[0] = val->value.i; ++ xrx200_pce_table_entry_write(&tem); ++ ++ xrx200sw_fixup_pvids(); ++ return 0; ++} ++ ++static int xrx200sw_get_vlan_vid(struct switch_dev *dev, const struct switch_attr *attr, ++ struct switch_val *val) ++{ ++ struct xrx200_pce_table_entry te; ++ ++ te.table = XRX200_PCE_ACTVLAN_IDX; ++ te.index = val->port_vlan; ++ xrx200_pce_table_entry_read(&te); ++ val->value.i = te.key[0]; ++ ++ return 0; ++} ++ ++static int xrx200sw_set_vlan_ports(struct switch_dev *dev, struct switch_val *val) ++{ ++ int i, portmap, tagmap, untagged; ++ struct xrx200_pce_table_entry tem; ++ ++ portmap = 0; ++ tagmap = 0; ++ for (i = 0; i < val->len; i++) ++ { ++ struct switch_port *p = &val->value.ports[i]; ++ ++ portmap |= (1 << p->id); ++ if (p->flags & (1 << SWITCH_PORT_FLAG_TAGGED)) ++ tagmap |= (1 << p->id); ++ } ++ ++ tem.table = XRX200_PCE_VLANMAP_IDX; ++ ++ untagged = portmap ^ tagmap; ++ for (i = 0; i < XRX200_MAX_VLAN; i++) ++ { ++ tem.index = i; ++ xrx200_pce_table_entry_read(&tem); ++ ++ if (tem.val[0] == 0) ++ continue; ++ ++ if ((untagged & (tem.val[1] ^ tem.val[2])) && (val->port_vlan != i)) ++ return -EINVAL; ++ } ++ ++ tem.index = val->port_vlan; ++ xrx200_pce_table_entry_read(&tem); ++ ++ // auto-enable this vlan if not enabled already ++ if (tem.val[0] == 0) ++ { ++ struct switch_val v; ++ v.port_vlan = val->port_vlan; ++ v.value.i = val->port_vlan; ++ if(xrx200sw_set_vlan_vid(dev, NULL, &v)) ++ return -EINVAL; ++ ++ //read updated tem ++ tem.index = val->port_vlan; ++ xrx200_pce_table_entry_read(&tem); ++ } ++ ++ tem.val[1] = portmap; ++ tem.val[2] = tagmap; ++ xrx200_pce_table_entry_write(&tem); ++ ++ xrx200sw_fixup_pvids(); ++ ++ return 0; ++} ++ ++static int xrx200sw_get_vlan_ports(struct switch_dev *dev, struct switch_val *val) ++{ ++ int i; ++ unsigned short ports, tags; ++ struct xrx200_pce_table_entry tem; ++ ++ tem.table = XRX200_PCE_VLANMAP_IDX; ++ tem.index = val->port_vlan; ++ xrx200_pce_table_entry_read(&tem); ++ ++ ports = tem.val[1]; ++ tags = tem.val[2]; ++ ++ for (i = 0; i < XRX200_MAX_PORT; i++) { ++ struct switch_port *p; ++ ++ if (!(ports & (1 << i))) ++ continue; ++ ++ p = &val->value.ports[val->len++]; ++ p->id = i; ++ if (tags & (1 << i)) ++ p->flags = (1 << SWITCH_PORT_FLAG_TAGGED); ++ else ++ p->flags = 0; ++ } ++ ++ return 0; ++} ++ ++static int xrx200sw_set_vlan_enable(struct switch_dev *dev, const struct switch_attr *attr, ++ struct switch_val *val) ++{ ++ struct xrx200_pce_table_entry tev; ++ ++ tev.table = XRX200_PCE_ACTVLAN_IDX; ++ tev.index = val->port_vlan; ++ xrx200_pce_table_entry_read(&tev); ++ ++ if (tev.key[0] == 0) ++ return -EINVAL; ++ ++ tev.valid = val->value.i; ++ xrx200_pce_table_entry_write(&tev); ++ ++ xrx200sw_fixup_pvids(); ++ return 0; ++} ++ ++static int xrx200sw_get_vlan_enable(struct switch_dev *dev, const struct switch_attr *attr, ++ struct switch_val *val) ++{ ++ struct xrx200_pce_table_entry tev; ++ ++ tev.table = XRX200_PCE_ACTVLAN_IDX; ++ tev.index = val->port_vlan; ++ xrx200_pce_table_entry_read(&tev); ++ val->value.i = tev.valid; ++ ++ return 0; ++} ++ ++// port ++static int xrx200sw_get_port_pvid(struct switch_dev *dev, int port, int *val) ++{ ++ struct xrx200_pce_table_entry tev; ++ ++ if (port >= XRX200_MAX_PORT) ++ return -EINVAL; ++ ++ tev.table = XRX200_PCE_ACTVLAN_IDX; ++ tev.index = xrx200sw_read_x(XRX200_PCE_DEFPVID_PVID, port); ++ xrx200_pce_table_entry_read(&tev); ++ ++ *val = tev.key[0]; ++ return 0; ++} ++ ++static int xrx200sw_get_port_link(struct switch_dev *dev, ++ int port, ++ struct switch_port_link *link) ++{ ++ if (port >= XRX200_MAX_PORT) ++ return -EINVAL; ++ ++ link->link = xrx200sw_read_x(XRX200_MAC_PSTAT_LSTAT, port); ++ if (!link->link) ++ return 0; ++ ++ link->duplex = xrx200sw_read_x(XRX200_MAC_PSTAT_FDUP, port); ++ ++ link->rx_flow = !!(xrx200sw_read_x(XRX200_MAC_CTRL_0_FCON, port) && 0x0010); ++ link->tx_flow = !!(xrx200sw_read_x(XRX200_MAC_CTRL_0_FCON, port) && 0x0020); ++ link->aneg = !(xrx200sw_read_x(XRX200_MAC_CTRL_0_FCON, port)); ++ ++ link->speed = SWITCH_PORT_SPEED_10; ++ if (xrx200sw_read_x(XRX200_MAC_PSTAT_MBIT, port)) ++ link->speed = SWITCH_PORT_SPEED_100; ++ if (xrx200sw_read_x(XRX200_MAC_PSTAT_GBIT, port)) ++ link->speed = SWITCH_PORT_SPEED_1000; ++ ++ return 0; ++} ++ ++static int xrx200_set_port_attr(struct switch_dev *dev, const struct switch_attr *attr, struct switch_val *val) ++{ ++ printk("%s %s(%d)\n", __FILE__, __func__, __LINE__); ++ if (val->port_vlan >= XRX200_MAX_PORT) ++ return -EINVAL; ++ ++ if ((attr->max > 0) && (val->value.i > attr->max)) ++ return -EINVAL; ++ ++ xrx200sw_write_x(val->value.i, attr->id, val->port_vlan); ++ return 0; ++} ++ ++static int xrx200_get_port_attr(struct switch_dev *dev, const struct switch_attr *attr, struct switch_val *val) ++{ ++ if (val->port_vlan >= XRX200_MAX_PORT) ++ return -EINVAL; ++ ++ val->value.i = xrx200sw_read_x(attr->id, val->port_vlan); ++ return 0; ++} ++ ++// attributes ++static struct switch_attr xrx200sw_globals[] = { ++ { ++ .type = SWITCH_TYPE_INT, ++ .set = xrx200_set_vlan_mode_enable, ++ .get = xrx200_get_vlan_mode_enable, ++ .name = "enable_vlan", ++ .description = "Enable VLAN mode", ++ .max = 1}, ++}; ++ ++static struct switch_attr xrx200sw_port[] = { ++ { ++ XRX200_PORT_REGATTR(XRX200_PCE_VCTRL_UVR), ++ .name = "uvr", ++ .description = "Unknown VLAN Rule", ++ .max = 1, ++ }, ++ { ++ XRX200_PORT_REGATTR(XRX200_PCE_VCTRL_VSR), ++ .name = "vsr", ++ .description = "VLAN Security Rule", ++ .max = 1, ++ }, ++ { ++ XRX200_PORT_REGATTR(XRX200_PCE_VCTRL_VINR), ++ .name = "vinr", ++ .description = "VLAN Ingress Tag Rule", ++ .max = 2, ++ }, ++ { ++ XRX200_PORT_REGATTR(XRX200_PCE_PCTRL_0_TVM), ++ .name = "tvm", ++ .description = "Transparent VLAN Mode", ++ .max = 1, ++ }, ++}; ++ ++static struct switch_attr xrx200sw_vlan[] = { ++ { ++ .type = SWITCH_TYPE_INT, ++ .name = "vid", ++ .description = "VLAN ID (0-4094)", ++ .set = xrx200sw_set_vlan_vid, ++ .get = xrx200sw_get_vlan_vid, ++ .max = 4094, ++ }, ++ { ++ .type = SWITCH_TYPE_INT, ++ .name = "enable", ++ .description = "Enable VLAN", ++ .set = xrx200sw_set_vlan_enable, ++ .get = xrx200sw_get_vlan_enable, ++ .max = 1, ++ }, ++}; ++ ++static const struct switch_dev_ops xrx200sw_ops = { ++ .attr_global = { ++ .attr = xrx200sw_globals, ++ .n_attr = ARRAY_SIZE(xrx200sw_globals), ++ }, ++ .attr_port = { ++ .attr = xrx200sw_port, ++ .n_attr = ARRAY_SIZE(xrx200sw_port), ++ }, ++ .attr_vlan = { ++ .attr = xrx200sw_vlan, ++ .n_attr = ARRAY_SIZE(xrx200sw_vlan), ++ }, ++ .get_vlan_ports = xrx200sw_get_vlan_ports, ++ .set_vlan_ports = xrx200sw_set_vlan_ports, ++ .get_port_pvid = xrx200sw_get_port_pvid, ++ .reset_switch = xrx200sw_reset_switch, ++ .get_port_link = xrx200sw_get_port_link, ++// .get_port_stats = xrx200sw_get_port_stats, //TODO ++}; ++ ++static int xrx200sw_init(struct xrx200_hw *hw) ++{ ++ int netdev_num; ++ ++ for (netdev_num = 0; netdev_num < hw->num_devs; netdev_num++) ++ { ++ struct switch_dev *swdev; ++ struct net_device *dev = hw->devs[netdev_num]; ++ struct xrx200_priv *priv = netdev_priv(dev); ++ if (!priv->sw) ++ continue; ++ ++ swdev = &hw->swdev; ++ ++ swdev->name = "Lantiq XRX200 Switch"; ++ swdev->vlans = XRX200_MAX_VLAN; ++ swdev->ports = XRX200_MAX_PORT; ++ swdev->cpu_port = 6; ++ swdev->ops = &xrx200sw_ops; ++ ++ register_switch(swdev, dev); ++ return 0; // enough switches ++ } ++ return 0; ++} ++ ++static int xrx200_open(struct net_device *dev) ++{ ++ struct xrx200_priv *priv = netdev_priv(dev); ++ unsigned long flags; ++ int i; ++ ++ for (i = 0; i < XRX200_MAX_DMA; i++) { ++ if (!priv->hw->chan[i].dma.irq) ++ continue; ++ spin_lock_irqsave(&priv->hw->lock, flags); ++ if (!priv->hw->chan[i].refcount) { ++ if (XRX200_DMA_IS_RX(i)) ++ napi_enable(&priv->hw->chan[i].napi); ++ ltq_dma_open(&priv->hw->chan[i].dma); ++ } ++ priv->hw->chan[i].refcount++; ++ spin_unlock_irqrestore(&priv->hw->lock, flags); ++ } ++ for (i = 0; i < priv->num_port; i++) ++ if (priv->port[i].phydev) ++ phy_start(priv->port[i].phydev); ++ netif_start_queue(dev); ++ ++ return 0; ++} ++ ++static int xrx200_close(struct net_device *dev) ++{ ++ struct xrx200_priv *priv = netdev_priv(dev); ++ unsigned long flags; ++ int i; ++ ++ netif_stop_queue(dev); ++ ++ for (i = 0; i < priv->num_port; i++) ++ if (priv->port[i].phydev) ++ phy_stop(priv->port[i].phydev); ++ ++ for (i = 0; i < XRX200_MAX_DMA; i++) { ++ if (!priv->hw->chan[i].dma.irq) ++ continue; ++ spin_lock_irqsave(&priv->hw->lock, flags); ++ priv->hw->chan[i].refcount--; ++ if (!priv->hw->chan[i].refcount) { ++ if (XRX200_DMA_IS_RX(i)) ++ napi_disable(&priv->hw->chan[i].napi); ++ ltq_dma_close(&priv->hw->chan[XRX200_DMA_RX].dma); ++ } ++ spin_unlock_irqrestore(&priv->hw->lock, flags); ++ } ++ ++ return 0; ++} ++ ++static int xrx200_alloc_skb(struct xrx200_chan *ch) ++{ ++#define DMA_PAD (NET_IP_ALIGN + NET_SKB_PAD) ++ ch->skb[ch->dma.desc] = dev_alloc_skb(XRX200_DMA_DATA_LEN + DMA_PAD); ++ if (!ch->skb[ch->dma.desc]) ++ return -ENOMEM; ++ ++ skb_reserve(ch->skb[ch->dma.desc], NET_SKB_PAD); ++ ch->dma.desc_base[ch->dma.desc].addr = dma_map_single(NULL, ++ ch->skb[ch->dma.desc]->data, XRX200_DMA_DATA_LEN, ++ DMA_FROM_DEVICE); ++ ch->dma.desc_base[ch->dma.desc].addr = ++ CPHYSADDR(ch->skb[ch->dma.desc]->data); ++ ch->dma.desc_base[ch->dma.desc].ctl = ++ LTQ_DMA_OWN | LTQ_DMA_RX_OFFSET(NET_IP_ALIGN) | ++ XRX200_DMA_DATA_LEN; ++ skb_reserve(ch->skb[ch->dma.desc], NET_IP_ALIGN); ++ ++ return 0; ++} ++ ++static void xrx200_hw_receive(struct xrx200_chan *ch, int id) ++{ ++ struct net_device *dev = ch->devs[id]; ++ struct xrx200_priv *priv = netdev_priv(dev); ++ struct ltq_dma_desc *desc = &ch->dma.desc_base[ch->dma.desc]; ++ struct sk_buff *skb = ch->skb[ch->dma.desc]; ++ int len = (desc->ctl & LTQ_DMA_SIZE_MASK); ++ unsigned long flags; ++ ++ spin_lock_irqsave(&priv->hw->lock, flags); ++ if (xrx200_alloc_skb(ch)) { ++ netdev_err(dev, ++ "failed to allocate new rx buffer, stopping DMA\n"); ++ ltq_dma_close(&ch->dma); ++ } ++ ++ ch->dma.desc++; ++ ch->dma.desc %= LTQ_DESC_NUM; ++ spin_unlock_irqrestore(&priv->hw->lock, flags); ++ ++ skb_put(skb, len); ++#ifdef SW_ROUTING ++ skb_pull(skb, 8); ++#endif ++ skb->dev = dev; ++ skb->protocol = eth_type_trans(skb, dev); ++ netif_receive_skb(skb); ++ priv->stats.rx_packets++; ++ priv->stats.rx_bytes+=len; ++} ++ ++static int xrx200_poll_rx(struct napi_struct *napi, int budget) ++{ ++ struct xrx200_chan *ch = container_of(napi, ++ struct xrx200_chan, napi); ++ struct xrx200_priv *priv = netdev_priv(ch->devs[0]); ++ int rx = 0; ++ int complete = 0; ++ unsigned long flags; ++ ++ while ((rx < budget) && !complete) { ++ struct ltq_dma_desc *desc = &ch->dma.desc_base[ch->dma.desc]; ++ if ((desc->ctl & (LTQ_DMA_OWN | LTQ_DMA_C)) == LTQ_DMA_C) { ++#ifdef SW_ROUTING ++ struct sk_buff *skb = ch->skb[ch->dma.desc]; ++ u32 *special_tag = (u32*)skb->data; ++ int port = (special_tag[1] >> SPPID_SHIFT) & SPPID_MASK; ++ xrx200_hw_receive(ch, priv->hw->port_map[port]); ++#else ++ xrx200_hw_receive(ch, 0); ++#endif ++ rx++; ++ } else { ++ complete = 1; ++ } ++ } ++ if (complete || !rx) { ++ napi_complete(&ch->napi); ++ spin_lock_irqsave(&priv->hw->lock, flags); ++ ltq_dma_ack_irq(&ch->dma); ++ spin_unlock_irqrestore(&priv->hw->lock, flags); ++ } ++ return rx; ++} ++ ++static void xrx200_tx_housekeeping(unsigned long ptr) ++{ ++ struct xrx200_hw *hw = (struct xrx200_hw *) ptr; ++ struct xrx200_chan *ch = &hw->chan[XRX200_DMA_TX]; ++ unsigned long flags; ++ int i; ++ ++ spin_lock_irqsave(&hw->lock, flags); ++ while ((ch->dma.desc_base[ch->tx_free].ctl & (LTQ_DMA_OWN | LTQ_DMA_C)) == LTQ_DMA_C) { ++ dev_kfree_skb_any(ch->skb[ch->tx_free]); ++ ch->skb[ch->tx_free] = NULL; ++ memset(&ch->dma.desc_base[ch->tx_free], 0, ++ sizeof(struct ltq_dma_desc)); ++ ch->tx_free++; ++ ch->tx_free %= LTQ_DESC_NUM; ++ } ++ spin_unlock_irqrestore(&hw->lock, flags); ++ ++ for (i = 0; i < XRX200_MAX_DEV && ch->devs[i]; i++) { ++ struct netdev_queue *txq = ++ netdev_get_tx_queue(ch->devs[i], 0); ++ if (netif_tx_queue_stopped(txq)) ++ netif_tx_start_queue(txq); ++ } ++ ++ spin_lock_irqsave(&hw->lock, flags); ++ ltq_dma_ack_irq(&ch->dma); ++ spin_unlock_irqrestore(&hw->lock, flags); ++} ++ ++static struct net_device_stats *xrx200_get_stats (struct net_device *dev) ++{ ++ struct xrx200_priv *priv = netdev_priv(dev); ++ ++ return &priv->stats; ++} ++ ++static void xrx200_tx_timeout(struct net_device *dev) ++{ ++ struct xrx200_priv *priv = netdev_priv(dev); ++ ++ printk(KERN_ERR "%s: transmit timed out, disable the dma channel irq\n", dev->name); ++ ++ priv->stats.tx_errors++; ++ netif_wake_queue(dev); ++} ++ ++static int xrx200_start_xmit(struct sk_buff *skb, struct net_device *dev) ++{ ++ int queue = skb_get_queue_mapping(skb); ++ struct netdev_queue *txq = netdev_get_tx_queue(dev, queue); ++ struct xrx200_priv *priv = netdev_priv(dev); ++ struct xrx200_chan *ch = &priv->hw->chan[XRX200_DMA_TX]; ++ struct ltq_dma_desc *desc = &ch->dma.desc_base[ch->dma.desc]; ++ unsigned long flags; ++ u32 byte_offset; ++ int len; ++#ifdef SW_ROUTING ++ #ifdef SW_PORTMAP ++ u32 special_tag = (SPID_CPU_PORT << SPID_SHIFT) | PORT_MAP_SEL | PORT_MAP_EN | DPID_ENABLE; ++ #else ++ u32 special_tag = (SPID_CPU_PORT << SPID_SHIFT) | DPID_ENABLE; ++ #endif ++#endif ++ ++ len = skb->len < ETH_ZLEN ? ETH_ZLEN : skb->len; ++ ++ if ((desc->ctl & (LTQ_DMA_OWN | LTQ_DMA_C)) || ch->skb[ch->dma.desc]) { ++ netdev_err(dev, "tx ring full\n"); ++ netif_tx_stop_queue(txq); ++ return NETDEV_TX_BUSY; ++ } ++#ifdef SW_ROUTING ++ #ifdef SW_PORTMAP ++ special_tag |= priv->port_map << PORT_MAP_SHIFT; ++ #else ++ if(priv->id) ++ special_tag |= (1 << DPID_SHIFT); ++ #endif ++ if(skb_headroom(skb) < 4) { ++ struct sk_buff *tmp = skb_realloc_headroom(skb, 4); ++ dev_kfree_skb_any(skb); ++ skb = tmp; ++ } ++ skb_push(skb, 4); ++ memcpy(skb->data, &special_tag, sizeof(u32)); ++ len += 4; ++#endif ++ ++ /* dma needs to start on a 16 byte aligned address */ ++ byte_offset = CPHYSADDR(skb->data) % 16; ++ ch->skb[ch->dma.desc] = skb; ++ ++ dev->trans_start = jiffies; ++ ++ spin_lock_irqsave(&priv->hw->lock, flags); ++ desc->addr = ((unsigned int) dma_map_single(NULL, skb->data, len, ++ DMA_TO_DEVICE)) - byte_offset; ++ wmb(); ++ desc->ctl = LTQ_DMA_OWN | LTQ_DMA_SOP | LTQ_DMA_EOP | ++ LTQ_DMA_TX_OFFSET(byte_offset) | (len & LTQ_DMA_SIZE_MASK); ++ ch->dma.desc++; ++ ch->dma.desc %= LTQ_DESC_NUM; ++ spin_unlock_irqrestore(&priv->hw->lock, flags); ++ ++ if (ch->dma.desc_base[ch->dma.desc].ctl & LTQ_DMA_OWN) ++ netif_tx_stop_queue(txq); ++ ++ priv->stats.tx_packets++; ++ priv->stats.tx_bytes+=len; ++ ++ return NETDEV_TX_OK; ++} ++ ++static irqreturn_t xrx200_dma_irq(int irq, void *priv) ++{ ++ struct xrx200_hw *hw = priv; ++ int ch = irq - XRX200_DMA_IRQ; ++ ++ if (ch % 2) ++ tasklet_schedule(&hw->chan[ch].tasklet); ++ else ++ napi_schedule(&hw->chan[ch].napi); ++ ++ return IRQ_HANDLED; ++} ++ ++static int xrx200_dma_init(struct xrx200_hw *hw) ++{ ++ int i, err = 0; ++ ++ ltq_dma_init_port(DMA_PORT_ETOP); ++ ++ for (i = 0; i < 8 && !err; i++) { ++ int irq = XRX200_DMA_IRQ + i; ++ struct xrx200_chan *ch = &hw->chan[i]; ++ ++ ch->idx = ch->dma.nr = i; ++ ++ if (i == XRX200_DMA_TX) { ++ ltq_dma_alloc_tx(&ch->dma); ++ err = request_irq(irq, xrx200_dma_irq, 0, "vrx200_tx", hw); ++ } else if (i == XRX200_DMA_RX) { ++ ltq_dma_alloc_rx(&ch->dma); ++ for (ch->dma.desc = 0; ch->dma.desc < LTQ_DESC_NUM; ++ ch->dma.desc++) ++ if (xrx200_alloc_skb(ch)) ++ err = -ENOMEM; ++ ch->dma.desc = 0; ++ err = request_irq(irq, xrx200_dma_irq, 0, "vrx200_rx", hw); ++ } else ++ continue; ++ ++ if (!err) ++ ch->dma.irq = irq; ++ } ++ ++ return err; ++} ++ ++#ifdef SW_POLLING ++static void xrx200_gmac_update(struct xrx200_port *port) ++{ ++ u16 phyaddr = port->phydev->addr & MDIO_PHY_ADDR_MASK; ++ u16 miimode = ltq_mii_r32(MII_CFG(port->num)) & MII_CFG_MODE_MASK; ++ u16 miirate = 0; ++ ++ switch (port->phydev->speed) { ++ case SPEED_1000: ++ phyaddr |= MDIO_PHY_SPEED_G1; ++ miirate = MII_CFG_RATE_M125; ++ break; ++ ++ case SPEED_100: ++ phyaddr |= MDIO_PHY_SPEED_M100; ++ switch (miimode) { ++ case MII_CFG_MODE_RMIIM: ++ case MII_CFG_MODE_RMIIP: ++ miirate = MII_CFG_RATE_M50; ++ break; ++ default: ++ miirate = MII_CFG_RATE_M25; ++ break; ++ } ++ break; ++ ++ default: ++ phyaddr |= MDIO_PHY_SPEED_M10; ++ miirate = MII_CFG_RATE_M2P5; ++ break; ++ } ++ ++ if (port->phydev->link) ++ phyaddr |= MDIO_PHY_LINK_UP; ++ else ++ phyaddr |= MDIO_PHY_LINK_DOWN; ++ ++ if (port->phydev->duplex == DUPLEX_FULL) ++ phyaddr |= MDIO_PHY_FDUP_EN; ++ else ++ phyaddr |= MDIO_PHY_FDUP_DIS; ++ ++ ltq_mdio_w32_mask(MDIO_UPDATE_MASK, phyaddr, MDIO_PHY(port->num)); ++ ltq_mii_w32_mask(MII_CFG_RATE_MASK, miirate, MII_CFG(port->num)); ++ udelay(1); ++} ++#else ++static void xrx200_gmac_update(struct xrx200_port *port) ++{ ++ ++} ++#endif ++ ++static void xrx200_mdio_link(struct net_device *dev) ++{ ++ struct xrx200_priv *priv = netdev_priv(dev); ++ int i; ++ ++ for (i = 0; i < priv->num_port; i++) { ++ if (!priv->port[i].phydev) ++ continue; ++ ++ if (priv->port[i].link != priv->port[i].phydev->link) { ++ xrx200_gmac_update(&priv->port[i]); ++ priv->port[i].link = priv->port[i].phydev->link; ++ netdev_info(dev, "port %d %s link\n", ++ priv->port[i].num, ++ (priv->port[i].link)?("got"):("lost")); ++ } ++ } ++} ++ ++static inline int xrx200_mdio_poll(struct mii_bus *bus) ++{ ++ unsigned cnt = 10000; ++ ++ while (likely(cnt--)) { ++ unsigned ctrl = ltq_mdio_r32(MDIO_CTRL); ++ if ((ctrl & MDIO_BUSY) == 0) ++ return 0; ++ } ++ ++ return 1; ++} ++ ++static int xrx200_mdio_wr(struct mii_bus *bus, int addr, int reg, u16 val) ++{ ++ if (xrx200_mdio_poll(bus)) ++ return 1; ++ ++ ltq_mdio_w32(val, MDIO_WRITE); ++ ltq_mdio_w32(MDIO_BUSY | MDIO_WR | ++ ((addr & MDIO_MASK) << MDIO_ADDRSHIFT) | ++ (reg & MDIO_MASK), ++ MDIO_CTRL); ++ ++ return 0; ++} ++ ++static int xrx200_mdio_rd(struct mii_bus *bus, int addr, int reg) ++{ ++ if (xrx200_mdio_poll(bus)) ++ return -1; ++ ++ ltq_mdio_w32(MDIO_BUSY | MDIO_RD | ++ ((addr & MDIO_MASK) << MDIO_ADDRSHIFT) | ++ (reg & MDIO_MASK), ++ MDIO_CTRL); ++ ++ if (xrx200_mdio_poll(bus)) ++ return -1; ++ ++ return ltq_mdio_r32(MDIO_READ); ++} ++ ++static int xrx200_mdio_probe(struct net_device *dev, struct xrx200_port *port) ++{ ++ struct xrx200_priv *priv = netdev_priv(dev); ++ struct phy_device *phydev = NULL; ++ unsigned val; ++ ++ phydev = priv->hw->mii_bus->phy_map[port->phy_addr]; ++ ++ if (!phydev) { ++ netdev_err(dev, "no PHY found\n"); ++ return -ENODEV; ++ } ++ ++ phydev = phy_connect(dev, dev_name(&phydev->dev), &xrx200_mdio_link, ++ port->phy_if); ++ ++ if (IS_ERR(phydev)) { ++ netdev_err(dev, "Could not attach to PHY\n"); ++ return PTR_ERR(phydev); ++ } ++ ++ phydev->supported &= (SUPPORTED_10baseT_Half ++ | SUPPORTED_10baseT_Full ++ | SUPPORTED_100baseT_Half ++ | SUPPORTED_100baseT_Full ++ | SUPPORTED_1000baseT_Half ++ | SUPPORTED_1000baseT_Full ++ | SUPPORTED_Autoneg ++ | SUPPORTED_MII ++ | SUPPORTED_TP); ++ phydev->advertising = phydev->supported; ++ port->phydev = phydev; ++ ++ pr_info("%s: attached PHY [%s] (phy_addr=%s, irq=%d)\n", ++ dev->name, phydev->drv->name, ++ dev_name(&phydev->dev), phydev->irq); ++ ++#ifdef SW_POLLING ++ phy_read_status(phydev); ++ ++ val = xrx200_mdio_rd(priv->hw->mii_bus, MDIO_DEVAD_NONE, MII_CTRL1000); ++ val |= ADVERTIZE_MPD; ++ xrx200_mdio_wr(priv->hw->mii_bus, MDIO_DEVAD_NONE, MII_CTRL1000, val); ++ xrx200_mdio_wr(priv->hw->mii_bus, 0, 0, 0x1040); ++ ++ phy_start_aneg(phydev); ++#endif ++ return 0; ++} ++ ++static void xrx200_port_config(struct xrx200_priv *priv, ++ const struct xrx200_port *port) ++{ ++ u16 miimode = 0; ++ ++ switch (port->num) { ++ case 0: /* xMII0 */ ++ case 1: /* xMII1 */ ++ switch (port->phy_if) { ++ case PHY_INTERFACE_MODE_MII: ++ if (port->flags & XRX200_PORT_TYPE_PHY) ++ /* MII MAC mode, connected to external PHY */ ++ miimode = MII_CFG_MODE_MIIM; ++ else ++ /* MII PHY mode, connected to external MAC */ ++ miimode = MII_CFG_MODE_MIIP; ++ break; ++ case PHY_INTERFACE_MODE_RMII: ++ if (port->flags & XRX200_PORT_TYPE_PHY) ++ /* RMII MAC mode, connected to external PHY */ ++ miimode = MII_CFG_MODE_RMIIM; ++ else ++ /* RMII PHY mode, connected to external MAC */ ++ miimode = MII_CFG_MODE_RMIIP; ++ break; ++ case PHY_INTERFACE_MODE_RGMII: ++ /* RGMII MAC mode, connected to external PHY */ ++ miimode = MII_CFG_MODE_RGMII; ++ break; ++ default: ++ break; ++ } ++ break; ++ case 2: /* internal GPHY0 */ ++ case 3: /* internal GPHY0 */ ++ case 4: /* internal GPHY1 */ ++ switch (port->phy_if) { ++ case PHY_INTERFACE_MODE_MII: ++ case PHY_INTERFACE_MODE_GMII: ++ /* MII MAC mode, connected to internal GPHY */ ++ miimode = MII_CFG_MODE_MIIM; ++ break; ++ default: ++ break; ++ } ++ break; ++ case 5: /* internal GPHY1 or xMII2 */ ++ switch (port->phy_if) { ++ case PHY_INTERFACE_MODE_MII: ++ /* MII MAC mode, connected to internal GPHY */ ++ miimode = MII_CFG_MODE_MIIM; ++ break; ++ case PHY_INTERFACE_MODE_RGMII: ++ /* RGMII MAC mode, connected to external PHY */ ++ miimode = MII_CFG_MODE_RGMII; ++ break; ++ default: ++ break; ++ } ++ break; ++ default: ++ break; ++ } ++ ++ ltq_mii_w32_mask(MII_CFG_MODE_MASK, miimode | MII_CFG_EN, ++ MII_CFG(port->num)); ++} ++ ++static int xrx200_init(struct net_device *dev) ++{ ++ struct xrx200_priv *priv = netdev_priv(dev); ++ struct sockaddr mac; ++ int err, i; ++ ++#ifndef SW_POLLING ++ unsigned int reg = 0; ++ ++ /* enable auto polling */ ++ for (i = 0; i < priv->num_port; i++) ++ reg |= BIT(priv->port[i].num); ++ ltq_mdio_w32(reg, MDIO_CLK_CFG0); ++ ltq_mdio_w32(MDIO1_25MHZ, MDIO_CLK_CFG1); ++#endif ++ ++ /* setup each port */ ++ for (i = 0; i < priv->num_port; i++) ++ xrx200_port_config(priv, &priv->port[i]); ++ ++ memcpy(&mac.sa_data, priv->mac, ETH_ALEN); ++ if (!is_valid_ether_addr(mac.sa_data)) { ++ pr_warn("net-xrx200: invalid MAC, using random\n"); ++ eth_random_addr(mac.sa_data); ++ dev->addr_assign_type |= NET_ADDR_RANDOM; ++ } ++ ++ err = eth_mac_addr(dev, &mac); ++ if (err) ++ goto err_netdev; ++ ++ for (i = 0; i < priv->num_port; i++) ++ if (xrx200_mdio_probe(dev, &priv->port[i])) ++ pr_warn("xrx200-mdio: probing phy of port %d failed\n", ++ priv->port[i].num); ++ ++ return 0; ++ ++err_netdev: ++ unregister_netdev(dev); ++ free_netdev(dev); ++ return err; ++} ++ ++static void xrx200_pci_microcode(void) ++{ ++ int i; ++ ++ ltq_switch_w32_mask(PCE_TBL_CFG_ADDR_MASK | PCE_TBL_CFG_ADWR_MASK, ++ PCE_TBL_CFG_ADWR, PCE_TBL_CTRL); ++ ltq_switch_w32(0, PCE_TBL_MASK); ++ ++ for (i = 0; i < ARRAY_SIZE(pce_microcode); i++) { ++ ltq_switch_w32(i, PCE_TBL_ADDR); ++ ltq_switch_w32(pce_microcode[i].val[3], PCE_TBL_VAL(0)); ++ ltq_switch_w32(pce_microcode[i].val[2], PCE_TBL_VAL(1)); ++ ltq_switch_w32(pce_microcode[i].val[1], PCE_TBL_VAL(2)); ++ ltq_switch_w32(pce_microcode[i].val[0], PCE_TBL_VAL(3)); ++ ++ // start the table access: ++ ltq_switch_w32_mask(0, PCE_TBL_BUSY, PCE_TBL_CTRL); ++ while (ltq_switch_r32(PCE_TBL_CTRL) & PCE_TBL_BUSY); ++ } ++ ++ /* tell the switch that the microcode is loaded */ ++ ltq_switch_w32_mask(0, BIT(3), PCE_GCTRL_REG(0)); ++} ++ ++static void xrx200_hw_init(struct xrx200_hw *hw) ++{ ++ int i; ++ ++ /* enable clock gate */ ++ clk_enable(hw->clk); ++ ++ ltq_switch_w32(1, 0); ++ mdelay(100); ++ ltq_switch_w32(0, 0); ++ /* ++ * TODO: we should really disbale all phys/miis here and explicitly ++ * enable them in the device secific init function ++ */ ++ ++ /* disable port fetch/store dma */ ++ for (i = 0; i < 7; i++ ) { ++ ltq_switch_w32(0, FDMA_PCTRLx(i)); ++ ltq_switch_w32(0, SDMA_PCTRLx(i)); ++ } ++ ++ /* enable Switch */ ++ ltq_mdio_w32_mask(0, MDIO_GLOB_ENABLE, MDIO_GLOB); ++ ++ /* load the pce microcode */ ++ xrx200_pci_microcode(); ++ ++ /* Default unknown Broadcat/Multicast/Unicast port maps */ ++ ltq_switch_w32(0x7f, PCE_PMAP1); ++ ltq_switch_w32(0x7f, PCE_PMAP2); ++ ltq_switch_w32(0x7f, PCE_PMAP3); ++ ++ /* RMON Counter Enable for all physical ports */ ++ for (i = 0; i < 7; i++) ++ ltq_switch_w32(0x1, BM_PCFG(i)); ++ ++ /* disable auto polling */ ++ ltq_mdio_w32(0x0, MDIO_CLK_CFG0); ++ ++ /* enable port statistic counters */ ++ for (i = 0; i < 7; i++) ++ ltq_switch_w32(0x1, BM_PCFGx(i)); ++ ++ /* set IPG to 12 */ ++ ltq_pmac_w32_mask(PMAC_IPG_MASK, 0xb, PMAC_RX_IPG); ++ ++#ifdef SW_ROUTING ++ /* enable status header, enable CRC */ ++ ltq_pmac_w32_mask(0, ++ PMAC_HD_CTL_RST | PMAC_HD_CTL_AST | PMAC_HD_CTL_RXSH | PMAC_HD_CTL_AS | PMAC_HD_CTL_AC, ++ PMAC_HD_CTL); ++#else ++ /* disable status header, enable CRC */ ++ ltq_pmac_w32_mask(PMAC_HD_CTL_AST | PMAC_HD_CTL_RXSH | PMAC_HD_CTL_AS, ++ PMAC_HD_CTL_AC, ++ PMAC_HD_CTL); ++#endif ++ ++ /* enable port fetch/store dma & VLAN Modification */ ++ for (i = 0; i < 7; i++ ) { ++ ltq_switch_w32_mask(0, 0x19, FDMA_PCTRLx(i)); ++ ltq_switch_w32_mask(0, 0x01, SDMA_PCTRLx(i)); ++ ltq_switch_w32_mask(0, PCE_INGRESS, PCE_PCTRL_REG(i, 0)); ++ } ++ ++ /* enable special tag insertion on cpu port */ ++ ltq_switch_w32_mask(0, 0x02, FDMA_PCTRLx(6)); ++ ltq_switch_w32_mask(0, PCE_INGRESS, PCE_PCTRL_REG(6, 0)); ++ ltq_switch_w32_mask(0, BIT(3), MAC_CTRL_REG(6, 2)); ++ ltq_switch_w32(1518 + 8 + 4 * 2, MAC_FLEN_REG); ++} ++ ++static void xrx200_hw_cleanup(struct xrx200_hw *hw) ++{ ++ int i; ++ ++ /* disable the switch */ ++ ltq_mdio_w32_mask(MDIO_GLOB_ENABLE, 0, MDIO_GLOB); ++ ++ /* free the channels and IRQs */ ++ for (i = 0; i < 2; i++) { ++ ltq_dma_free(&hw->chan[i].dma); ++ if (hw->chan[i].dma.irq) ++ free_irq(hw->chan[i].dma.irq, hw); ++ } ++ ++ /* free the allocated RX ring */ ++ for (i = 0; i < LTQ_DESC_NUM; i++) ++ dev_kfree_skb_any(hw->chan[XRX200_DMA_RX].skb[i]); ++ ++ /* clear the mdio bus */ ++ mdiobus_unregister(hw->mii_bus); ++ mdiobus_free(hw->mii_bus); ++ ++ /* release the clock */ ++ clk_disable(hw->clk); ++ clk_put(hw->clk); ++} ++ ++static int xrx200_of_mdio(struct xrx200_hw *hw, struct device_node *np) ++{ ++ hw->mii_bus = mdiobus_alloc(); ++ if (!hw->mii_bus) ++ return -ENOMEM; ++ ++ hw->mii_bus->read = xrx200_mdio_rd; ++ hw->mii_bus->write = xrx200_mdio_wr; ++ hw->mii_bus->name = "lantiq,xrx200-mdio"; ++ snprintf(hw->mii_bus->id, MII_BUS_ID_SIZE, "%x", 0); ++ ++ if (of_mdiobus_register(hw->mii_bus, np)) { ++ mdiobus_free(hw->mii_bus); ++ return -ENXIO; ++ } ++ ++ return 0; ++} ++ ++static void xrx200_of_port(struct xrx200_priv *priv, struct device_node *port) ++{ ++ const __be32 *addr, *id = of_get_property(port, "reg", NULL); ++ struct xrx200_port *p = &priv->port[priv->num_port]; ++ ++ if (!id) ++ return; ++ ++ memset(p, 0, sizeof(struct xrx200_port)); ++ p->phy_node = of_parse_phandle(port, "phy-handle", 0); ++ addr = of_get_property(p->phy_node, "reg", NULL); ++ if (!addr) ++ return; ++ ++ p->num = *id; ++ p->phy_addr = *addr; ++ p->phy_if = of_get_phy_mode(port); ++ if (p->phy_addr > 0x10) ++ p->flags = XRX200_PORT_TYPE_MAC; ++ else ++ p->flags = XRX200_PORT_TYPE_PHY; ++ priv->num_port++; ++ ++ p->gpio = of_get_gpio_flags(port, 0, &p->gpio_flags); ++ if (gpio_is_valid(p->gpio)) ++ if (!gpio_request(p->gpio, "phy-reset")) { ++ gpio_direction_output(p->gpio, ++ (p->gpio_flags & OF_GPIO_ACTIVE_LOW) ? (1) : (0)); ++ udelay(100); ++ gpio_set_value(p->gpio, (p->gpio_flags & OF_GPIO_ACTIVE_LOW) ? (0) : (1)); ++ } ++ /* is this port a wan port ? */ ++ if (priv->wan) ++ priv->hw->wan_map |= BIT(p->num); ++ ++ priv->port_map |= BIT(p->num); ++ ++ /* store the port id in the hw struct so we can map ports -> devices */ ++ priv->hw->port_map[p->num] = priv->hw->num_devs; ++} ++ ++static const struct net_device_ops xrx200_netdev_ops = { ++ .ndo_init = xrx200_init, ++ .ndo_open = xrx200_open, ++ .ndo_stop = xrx200_close, ++ .ndo_start_xmit = xrx200_start_xmit, ++ .ndo_set_mac_address = eth_mac_addr, ++ .ndo_validate_addr = eth_validate_addr, ++ .ndo_change_mtu = eth_change_mtu, ++ .ndo_get_stats = xrx200_get_stats, ++ .ndo_tx_timeout = xrx200_tx_timeout, ++}; ++ ++static void xrx200_of_iface(struct xrx200_hw *hw, struct device_node *iface) ++{ ++ struct xrx200_priv *priv; ++ struct device_node *port; ++ const __be32 *wan; ++ ++ /* alloc the network device */ ++ hw->devs[hw->num_devs] = alloc_etherdev(sizeof(struct xrx200_priv)); ++ if (!hw->devs[hw->num_devs]) ++ return; ++ ++ /* setup the network device */ ++ strcpy(hw->devs[hw->num_devs]->name, "eth%d"); ++ hw->devs[hw->num_devs]->netdev_ops = &xrx200_netdev_ops; ++ hw->devs[hw->num_devs]->watchdog_timeo = XRX200_TX_TIMEOUT; ++ hw->devs[hw->num_devs]->needed_headroom = XRX200_HEADROOM; ++ ++ /* setup our private data */ ++ priv = netdev_priv(hw->devs[hw->num_devs]); ++ priv->hw = hw; ++ of_get_mac_address_mtd(iface, priv->mac); ++ priv->id = hw->num_devs; ++ ++ /* is this the wan interface ? */ ++ wan = of_get_property(iface, "lantiq,wan", NULL); ++ if (wan && (*wan == 1)) ++ priv->wan = 1; ++ ++ /* should the switch be enabled on this interface ? */ ++ if (of_find_property(iface, "lantiq,switch", NULL)) ++ priv->sw = 1; ++ ++ /* load the ports that are part of the interface */ ++ for_each_child_of_node(iface, port) ++ if (of_device_is_compatible(port, "lantiq,xrx200-pdi-port")) ++ xrx200_of_port(priv, port); ++ ++ /* register the actual device */ ++ if (!register_netdev(hw->devs[hw->num_devs])) ++ hw->num_devs++; ++} ++ ++static struct xrx200_hw xrx200_hw; ++ ++static int xrx200_probe(struct platform_device *pdev) ++{ ++ struct resource *res[4]; ++ struct device_node *mdio_np, *iface_np; ++ int i; ++ ++ /* load the memory ranges */ ++ for (i = 0; i < 4; i++) { ++ res[i] = platform_get_resource(pdev, IORESOURCE_MEM, i); ++ if (!res[i]) { ++ dev_err(&pdev->dev, "failed to get resources\n"); ++ return -ENOENT; ++ } ++ } ++ xrx200_switch_membase = devm_ioremap_resource(&pdev->dev, res[0]); ++ xrx200_mdio_membase = devm_ioremap_resource(&pdev->dev, res[1]); ++ xrx200_mii_membase = devm_ioremap_resource(&pdev->dev, res[2]); ++ xrx200_pmac_membase = devm_ioremap_resource(&pdev->dev, res[3]); ++ if (!xrx200_switch_membase || !xrx200_mdio_membase || ++ !xrx200_mii_membase || !xrx200_pmac_membase) { ++ dev_err(&pdev->dev, "failed to request and remap io ranges \n"); ++ return -ENOMEM; ++ } ++ ++ /* get the clock */ ++ xrx200_hw.clk = clk_get(&pdev->dev, NULL); ++ if (IS_ERR(xrx200_hw.clk)) { ++ dev_err(&pdev->dev, "failed to get clock\n"); ++ return PTR_ERR(xrx200_hw.clk); ++ } ++ ++ /* bring up the dma engine and IP core */ ++ spin_lock_init(&xrx200_hw.lock); ++ xrx200_dma_init(&xrx200_hw); ++ xrx200_hw_init(&xrx200_hw); ++ tasklet_init(&xrx200_hw.chan[XRX200_DMA_TX].tasklet, xrx200_tx_housekeeping, (u32) &xrx200_hw); ++ ++ /* bring up the mdio bus */ ++ mdio_np = of_find_compatible_node(pdev->dev.of_node, NULL, ++ "lantiq,xrx200-mdio"); ++ if (mdio_np) ++ if (xrx200_of_mdio(&xrx200_hw, mdio_np)) ++ dev_err(&pdev->dev, "mdio probe failed\n"); ++ ++ /* load the interfaces */ ++ for_each_child_of_node(pdev->dev.of_node, iface_np) ++ if (of_device_is_compatible(iface_np, "lantiq,xrx200-pdi")) { ++ if (xrx200_hw.num_devs < XRX200_MAX_DEV) ++ xrx200_of_iface(&xrx200_hw, iface_np); ++ else ++ dev_err(&pdev->dev, ++ "only %d interfaces allowed\n", ++ XRX200_MAX_DEV); ++ } ++ ++ if (!xrx200_hw.num_devs) { ++ xrx200_hw_cleanup(&xrx200_hw); ++ dev_err(&pdev->dev, "failed to load interfaces\n"); ++ return -ENOENT; ++ } ++ ++ xrx200sw_init(&xrx200_hw); ++ ++ /* set wan port mask */ ++ ltq_pmac_w32(xrx200_hw.wan_map, PMAC_EWAN); ++ ++ for (i = 0; i < xrx200_hw.num_devs; i++) { ++ xrx200_hw.chan[XRX200_DMA_RX].devs[i] = xrx200_hw.devs[i]; ++ xrx200_hw.chan[XRX200_DMA_TX].devs[i] = xrx200_hw.devs[i]; ++ } ++ ++ /* setup NAPI */ ++ init_dummy_netdev(&xrx200_hw.chan[XRX200_DMA_RX].dummy_dev); ++ netif_napi_add(&xrx200_hw.chan[XRX200_DMA_RX].dummy_dev, ++ &xrx200_hw.chan[XRX200_DMA_RX].napi, xrx200_poll_rx, 32); ++ ++ platform_set_drvdata(pdev, &xrx200_hw); ++ ++ return 0; ++} ++ ++static int xrx200_remove(struct platform_device *pdev) ++{ ++ struct net_device *dev = platform_get_drvdata(pdev); ++ struct xrx200_priv *priv; ++ ++ if (!dev) ++ return 0; ++ ++ priv = netdev_priv(dev); ++ ++ /* free stack related instances */ ++ netif_stop_queue(dev); ++ netif_napi_del(&xrx200_hw.chan[XRX200_DMA_RX].napi); ++ ++ /* shut down hardware */ ++ xrx200_hw_cleanup(&xrx200_hw); ++ ++ /* remove the actual device */ ++ unregister_netdev(dev); ++ free_netdev(dev); ++ ++ return 0; ++} ++ ++static const struct of_device_id xrx200_match[] = { ++ { .compatible = "lantiq,xrx200-net" }, ++ {}, ++}; ++MODULE_DEVICE_TABLE(of, xrx200_match); ++ ++static struct platform_driver xrx200_driver = { ++ .probe = xrx200_probe, ++ .remove = xrx200_remove, ++ .driver = { ++ .name = "lantiq,xrx200-net", ++ .of_match_table = xrx200_match, ++ .owner = THIS_MODULE, ++ }, ++}; ++ ++module_platform_driver(xrx200_driver); ++ ++MODULE_AUTHOR("John Crispin "); ++MODULE_DESCRIPTION("Lantiq SoC XRX200 ethernet"); ++MODULE_LICENSE("GPL"); +--- /dev/null ++++ b/drivers/net/ethernet/lantiq_xrx200_sw.h +@@ -0,0 +1,1328 @@ ++/* ++ * This program is free software; you can redistribute it and/or modify it ++ * under the terms of the GNU General Public License version 2 as published ++ * by the Free Software Foundation. ++ * ++ * This program is distributed in the hope that it will be useful, ++ * but WITHOUT ANY WARRANTY; without even the implied warranty of ++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the ++ * GNU General Public License for more details. ++ * ++ * You should have received a copy of the GNU General Public License ++ * along with this program; if not, write to the Free Software ++ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307, USA. ++ * ++ * Copyright (C) 2010 Lantiq Deutschland GmbH ++ * Copyright (C) 2013 Antonios Vamporakis ++ * ++ * VR9 switch registers extracted from 310TUJ0 switch api ++ * WARNING mult values of 0x00 may not be correct ++ * ++ */ ++ ++enum { ++// XRX200_ETHSW_SWRES, /* Ethernet Switch ResetControl Register */ ++// XRX200_ETHSW_SWRES_R1, /* Hardware Reset */ ++// XRX200_ETHSW_SWRES_R0, /* Register Configuration */ ++// XRX200_ETHSW_CLK_MAC_GAT, /* Ethernet Switch Clock ControlRegister */ ++// XRX200_ETHSW_CLK_EXP_SLEEP, /* Exponent to put system into sleep */ ++// XRX200_ETHSW_CLK_EXP_WAKE, /* Exponent to wake up system */ ++// XRX200_ETHSW_CLK_CLK2_EN, /* CLK2 Input for MAC */ ++// XRX200_ETHSW_CLK_EXT_DIV_EN, /* External Clock Divider Enable */ ++// XRX200_ETHSW_CLK_RAM_DBG_EN, /* Clock Gating Enable */ ++// XRX200_ETHSW_CLK_REG_GAT_EN, /* Clock Gating Enable */ ++// XRX200_ETHSW_CLK_GAT_EN, /* Clock Gating Enable */ ++// XRX200_ETHSW_CLK_MAC_GAT_EN, /* Clock Gating Enable */ ++// XRX200_ETHSW_DBG_STEP, /* Ethernet Switch Debug ControlRegister */ ++// XRX200_ETHSW_DBG_CLK_SEL, /* Trigger Enable */ ++// XRX200_ETHSW_DBG_MON_EN, /* Monitoring Enable */ ++// XRX200_ETHSW_DBG_TRIG_EN, /* Trigger Enable */ ++// XRX200_ETHSW_DBG_MODE, /* Debug Mode */ ++// XRX200_ETHSW_DBG_STEP_TIME, /* Clock Step Size */ ++// XRX200_ETHSW_SSB_MODE, /* Ethernet Switch SharedSegment Buffer Mode Register */ ++// XRX200_ETHSW_SSB_MODE_ADDE, /* Memory Address */ ++// XRX200_ETHSW_SSB_MODE_MODE, /* Memory Access Mode */ ++// XRX200_ETHSW_SSB_ADDR, /* Ethernet Switch SharedSegment Buffer Address Register */ ++// XRX200_ETHSW_SSB_ADDR_ADDE, /* Memory Address */ ++// XRX200_ETHSW_SSB_DATA, /* Ethernet Switch SharedSegment Buffer Data Register */ ++// XRX200_ETHSW_SSB_DATA_DATA, /* Data Value */ ++// XRX200_ETHSW_CAP_0, /* Ethernet Switch CapabilityRegister 0 */ ++// XRX200_ETHSW_CAP_0_SPEED, /* Clock frequency */ ++// XRX200_ETHSW_CAP_1, /* Ethernet Switch CapabilityRegister 1 */ ++// XRX200_ETHSW_CAP_1_GMAC, /* MAC operation mode */ ++// XRX200_ETHSW_CAP_1_QUEUE, /* Number of queues */ ++// XRX200_ETHSW_CAP_1_VPORTS, /* Number of virtual ports */ ++// XRX200_ETHSW_CAP_1_PPORTS, /* Number of physical ports */ ++// XRX200_ETHSW_CAP_2, /* Ethernet Switch CapabilityRegister 2 */ ++// XRX200_ETHSW_CAP_2_PACKETS, /* Number of packets */ ++// XRX200_ETHSW_CAP_3, /* Ethernet Switch CapabilityRegister 3 */ ++// XRX200_ETHSW_CAP_3_METERS, /* Number of traffic meters */ ++// XRX200_ETHSW_CAP_3_SHAPERS, /* Number of traffic shapers */ ++// XRX200_ETHSW_CAP_4, /* Ethernet Switch CapabilityRegister 4 */ ++// XRX200_ETHSW_CAP_4_PPPOE, /* PPPoE table size */ ++// XRX200_ETHSW_CAP_4_VLAN, /* Active VLAN table size */ ++// XRX200_ETHSW_CAP_5, /* Ethernet Switch CapabilityRegister 5 */ ++// XRX200_ETHSW_CAP_5_IPPLEN, /* IP packet length table size */ ++// XRX200_ETHSW_CAP_5_PROT, /* Protocol table size */ ++// XRX200_ETHSW_CAP_6, /* Ethernet Switch CapabilityRegister 6 */ ++// XRX200_ETHSW_CAP_6_MACDASA, /* MAC DA/SA table size */ ++// XRX200_ETHSW_CAP_6_APPL, /* Application table size */ ++// XRX200_ETHSW_CAP_7, /* Ethernet Switch CapabilityRegister 7 */ ++// XRX200_ETHSW_CAP_7_IPDASAM, /* IP DA/SA MSB table size */ ++// XRX200_ETHSW_CAP_7_IPDASAL, /* IP DA/SA LSB table size */ ++// XRX200_ETHSW_CAP_8, /* Ethernet Switch CapabilityRegister 8 */ ++// XRX200_ETHSW_CAP_8_MCAST, /* Multicast table size */ ++// XRX200_ETHSW_CAP_9, /* Ethernet Switch CapabilityRegister 9 */ ++// XRX200_ETHSW_CAP_9_FLAGG, /* Flow Aggregation table size */ ++// XRX200_ETHSW_CAP_10, /* Ethernet Switch CapabilityRegister 10 */ ++// XRX200_ETHSW_CAP_10_MACBT, /* MAC bridging table size */ ++// XRX200_ETHSW_CAP_11, /* Ethernet Switch CapabilityRegister 11 */ ++// XRX200_ETHSW_CAP_11_BSIZEL, /* Packet buffer size (lower part, in byte) */ ++// XRX200_ETHSW_CAP_12, /* Ethernet Switch CapabilityRegister 12 */ ++// XRX200_ETHSW_CAP_12_BSIZEH, /* Packet buffer size (higher part, in byte) */ ++// XRX200_ETHSW_VERSION_REV, /* Ethernet Switch VersionRegister */ ++// XRX200_ETHSW_VERSION_MOD_ID, /* Module Identification */ ++// XRX200_ETHSW_VERSION_REV_ID, /* Hardware Revision Identification */ ++// XRX200_ETHSW_IER, /* Interrupt Enable Register */ ++// XRX200_ETHSW_IER_FDMAIE, /* Fetch DMA Interrupt Enable */ ++// XRX200_ETHSW_IER_SDMAIE, /* Store DMA Interrupt Enable */ ++// XRX200_ETHSW_IER_MACIE, /* Ethernet MAC Interrupt Enable */ ++// XRX200_ETHSW_IER_PCEIE, /* Parser and Classification Engine Interrupt Enable */ ++// XRX200_ETHSW_IER_BMIE, /* Buffer Manager Interrupt Enable */ ++// XRX200_ETHSW_ISR, /* Interrupt Status Register */ ++// XRX200_ETHSW_ISR_FDMAINT, /* Fetch DMA Interrupt */ ++// XRX200_ETHSW_ISR_SDMAINT, /* Store DMA Interrupt */ ++// XRX200_ETHSW_ISR_MACINT, /* Ethernet MAC Interrupt */ ++// XRX200_ETHSW_ISR_PCEINT, /* Parser and Classification Engine Interrupt */ ++// XRX200_ETHSW_ISR_BMINT, /* Buffer Manager Interrupt */ ++// XRX200_ETHSW_SPARE_0, /* Ethernet Switch SpareCells 0 */ ++// XRX200_ETHSW_SPARE_0_SPARE, /* SPARE0 */ ++// XRX200_ETHSW_SPARE_1, /* Ethernet Switch SpareCells 1 */ ++// XRX200_ETHSW_SPARE_1_SPARE, /* SPARE1 */ ++// XRX200_ETHSW_SPARE_2, /* Ethernet Switch SpareCells 2 */ ++// XRX200_ETHSW_SPARE_2_SPARE, /* SPARE2 */ ++// XRX200_ETHSW_SPARE_3, /* Ethernet Switch SpareCells 3 */ ++// XRX200_ETHSW_SPARE_3_SPARE, /* SPARE3 */ ++// XRX200_ETHSW_SPARE_4, /* Ethernet Switch SpareCells 4 */ ++// XRX200_ETHSW_SPARE_4_SPARE, /* SPARE4 */ ++// XRX200_ETHSW_SPARE_5, /* Ethernet Switch SpareCells 5 */ ++// XRX200_ETHSW_SPARE_5_SPARE, /* SPARE5 */ ++// XRX200_ETHSW_SPARE_6, /* Ethernet Switch SpareCells 6 */ ++// XRX200_ETHSW_SPARE_6_SPARE, /* SPARE6 */ ++// XRX200_ETHSW_SPARE_7, /* Ethernet Switch SpareCells 7 */ ++// XRX200_ETHSW_SPARE_7_SPARE, /* SPARE7 */ ++// XRX200_ETHSW_SPARE_8, /* Ethernet Switch SpareCells 8 */ ++// XRX200_ETHSW_SPARE_8_SPARE, /* SPARE8 */ ++// XRX200_ETHSW_SPARE_9, /* Ethernet Switch SpareCells 9 */ ++// XRX200_ETHSW_SPARE_9_SPARE, /* SPARE9 */ ++// XRX200_ETHSW_SPARE_10, /* Ethernet Switch SpareCells 10 */ ++// XRX200_ETHSW_SPARE_10_SPARE, /* SPARE10 */ ++// XRX200_ETHSW_SPARE_11, /* Ethernet Switch SpareCells 11 */ ++// XRX200_ETHSW_SPARE_11_SPARE, /* SPARE11 */ ++// XRX200_ETHSW_SPARE_12, /* Ethernet Switch SpareCells 12 */ ++// XRX200_ETHSW_SPARE_12_SPARE, /* SPARE12 */ ++// XRX200_ETHSW_SPARE_13, /* Ethernet Switch SpareCells 13 */ ++// XRX200_ETHSW_SPARE_13_SPARE, /* SPARE13 */ ++// XRX200_ETHSW_SPARE_14, /* Ethernet Switch SpareCells 14 */ ++// XRX200_ETHSW_SPARE_14_SPARE, /* SPARE14 */ ++// XRX200_ETHSW_SPARE_15, /* Ethernet Switch SpareCells 15 */ ++// XRX200_ETHSW_SPARE_15_SPARE, /* SPARE15 */ ++// XRX200_BM_RAM_VAL_3, /* RAM Value Register 3 */ ++// XRX200_BM_RAM_VAL_3_VAL3, /* Data value [15:0] */ ++// XRX200_BM_RAM_VAL_2, /* RAM Value Register 2 */ ++// XRX200_BM_RAM_VAL_2_VAL2, /* Data value [15:0] */ ++// XRX200_BM_RAM_VAL_1, /* RAM Value Register 1 */ ++// XRX200_BM_RAM_VAL_1_VAL1, /* Data value [15:0] */ ++// XRX200_BM_RAM_VAL_0, /* RAM Value Register 0 */ ++// XRX200_BM_RAM_VAL_0_VAL0, /* Data value [15:0] */ ++// XRX200_BM_RAM_ADDR, /* RAM Address Register */ ++// XRX200_BM_RAM_ADDR_ADDR, /* RAM Address */ ++// XRX200_BM_RAM_CTRL, /* RAM Access Control Register */ ++// XRX200_BM_RAM_CTRL_BAS, /* Access Busy/Access Start */ ++// XRX200_BM_RAM_CTRL_OPMOD, /* Lookup Table Access Operation Mode */ ++// XRX200_BM_RAM_CTRL_ADDR, /* Address for RAM selection */ ++// XRX200_BM_FSQM_GCTRL, /* Free Segment Queue ManagerGlobal Control Register */ ++// XRX200_BM_FSQM_GCTRL_SEGNUM, /* Maximum Segment Number */ ++// XRX200_BM_CONS_SEG, /* Number of Consumed SegmentsRegister */ ++// XRX200_BM_CONS_SEG_FSEG, /* Number of Consumed Segments */ ++// XRX200_BM_CONS_PKT, /* Number of Consumed PacketPointers Register */ ++// XRX200_BM_CONS_PKT_FQP, /* Number of Consumed Packet Pointers */ ++// XRX200_BM_GCTRL_F, /* Buffer Manager Global ControlRegister 0 */ ++// XRX200_BM_GCTRL_BM_STA, /* Buffer Manager Initialization Status Bit */ ++// XRX200_BM_GCTRL_SAT, /* RMON Counter Update Mode */ ++// XRX200_BM_GCTRL_FR_RBC, /* Freeze RMON RX Bad Byte 64 Bit Counter */ ++// XRX200_BM_GCTRL_FR_RGC, /* Freeze RMON RX Good Byte 64 Bit Counter */ ++// XRX200_BM_GCTRL_FR_TGC, /* Freeze RMON TX Good Byte 64 Bit Counter */ ++// XRX200_BM_GCTRL_I_FIN, /* RAM initialization finished */ ++// XRX200_BM_GCTRL_CX_INI, /* PQM Context RAM initialization */ ++// XRX200_BM_GCTRL_FP_INI, /* FPQM RAM initialization */ ++// XRX200_BM_GCTRL_FS_INI, /* FSQM RAM initialization */ ++// XRX200_BM_GCTRL_R_SRES, /* Software Reset for RMON */ ++// XRX200_BM_GCTRL_S_SRES, /* Software Reset for Scheduler */ ++// XRX200_BM_GCTRL_A_SRES, /* Software Reset for AVG */ ++// XRX200_BM_GCTRL_P_SRES, /* Software Reset for PQM */ ++// XRX200_BM_GCTRL_F_SRES, /* Software Reset for FSQM */ ++// XRX200_BM_QUEUE_GCTRL, /* Queue Manager GlobalControl Register 0 */ ++// XRX200_BM_QUEUE_GCTRL_GL_MOD, /* WRED Mode Signal */ ++// XRX200_BM_QUEUE_GCTRL_AQUI, /* Average Queue Update Interval */ ++// XRX200_BM_QUEUE_GCTRL_AQWF, /* Average Queue Weight Factor */ ++// XRX200_BM_QUEUE_GCTRL_QAVGEN, /* Queue Average Calculation Enable */ ++// XRX200_BM_QUEUE_GCTRL_DPROB, /* Drop Probability Profile */ ++// XRX200_BM_WRED_RTH_0, /* WRED Red Threshold Register0 */ ++// XRX200_BM_WRED_RTH_0_MINTH, /* Minimum Threshold */ ++// XRX200_BM_WRED_RTH_1, /* WRED Red Threshold Register1 */ ++// XRX200_BM_WRED_RTH_1_MAXTH, /* Maximum Threshold */ ++// XRX200_BM_WRED_YTH_0, /* WRED Yellow ThresholdRegister 0 */ ++// XRX200_BM_WRED_YTH_0_MINTH, /* Minimum Threshold */ ++// XRX200_BM_WRED_YTH_1, /* WRED Yellow ThresholdRegister 1 */ ++// XRX200_BM_WRED_YTH_1_MAXTH, /* Maximum Threshold */ ++// XRX200_BM_WRED_GTH_0, /* WRED Green ThresholdRegister 0 */ ++// XRX200_BM_WRED_GTH_0_MINTH, /* Minimum Threshold */ ++// XRX200_BM_WRED_GTH_1, /* WRED Green ThresholdRegister 1 */ ++// XRX200_BM_WRED_GTH_1_MAXTH, /* Maximum Threshold */ ++// XRX200_BM_DROP_GTH_0_THR, /* Drop Threshold ConfigurationRegister 0 */ ++// XRX200_BM_DROP_GTH_0_THR_FQ, /* Threshold for frames marked red */ ++// XRX200_BM_DROP_GTH_1_THY, /* Drop Threshold ConfigurationRegister 1 */ ++// XRX200_BM_DROP_GTH_1_THY_FQ, /* Threshold for frames marked yellow */ ++// XRX200_BM_DROP_GTH_2_THG, /* Drop Threshold ConfigurationRegister 2 */ ++// XRX200_BM_DROP_GTH_2_THG_FQ, /* Threshold for frames marked green */ ++// XRX200_BM_IER, /* Buffer Manager Global InterruptEnable Register */ ++// XRX200_BM_IER_CNT4, /* Counter Group 4 (RMON-CLASSIFICATION) Interrupt Enable */ ++// XRX200_BM_IER_CNT3, /* Counter Group 3 (RMON-PQM) Interrupt Enable */ ++// XRX200_BM_IER_CNT2, /* Counter Group 2 (RMON-SCHEDULER) Interrupt Enable */ ++// XRX200_BM_IER_CNT1, /* Counter Group 1 (RMON-QFETCH) Interrupt Enable */ ++// XRX200_BM_IER_CNT0, /* Counter Group 0 (RMON-QSTOR) Interrupt Enable */ ++// XRX200_BM_IER_DEQ, /* PQM dequeue Interrupt Enable */ ++// XRX200_BM_IER_ENQ, /* PQM Enqueue Interrupt Enable */ ++// XRX200_BM_IER_FSQM, /* Buffer Empty Interrupt Enable */ ++// XRX200_BM_ISR, /* Buffer Manager Global InterruptStatus Register */ ++// XRX200_BM_ISR_CNT4, /* Counter Group 4 Interrupt */ ++// XRX200_BM_ISR_CNT3, /* Counter Group 3 Interrupt */ ++// XRX200_BM_ISR_CNT2, /* Counter Group 2 Interrupt */ ++// XRX200_BM_ISR_CNT1, /* Counter Group 1 Interrupt */ ++// XRX200_BM_ISR_CNT0, /* Counter Group 0 Interrupt */ ++// XRX200_BM_ISR_DEQ, /* PQM dequeue Interrupt Enable */ ++// XRX200_BM_ISR_ENQ, /* PQM Enqueue Interrupt */ ++// XRX200_BM_ISR_FSQM, /* Buffer Empty Interrupt */ ++// XRX200_BM_CISEL, /* Buffer Manager RMON CounterInterrupt Select Register */ ++// XRX200_BM_CISEL_PORT, /* Port Number */ ++// XRX200_BM_DEBUG_CTRL_DBG, /* Debug Control Register */ ++// XRX200_BM_DEBUG_CTRL_DBG_SEL, /* Select Signal for Debug Multiplexer */ ++// XRX200_BM_DEBUG_VAL_DBG, /* Debug Value Register */ ++// XRX200_BM_DEBUG_VAL_DBG_DAT, /* Debug Data Value */ ++// XRX200_BM_PCFG, /* Buffer Manager PortConfiguration Register */ ++// XRX200_BM_PCFG_CNTEN, /* RMON Counter Enable */ ++// XRX200_BM_RMON_CTRL_RAM1, /* Buffer ManagerRMON Control Register */ ++// XRX200_BM_RMON_CTRL_RAM2_RES, /* Software Reset for RMON RAM2 */ ++// XRX200_BM_RMON_CTRL_RAM1_RES, /* Software Reset for RMON RAM1 */ ++// XRX200_PQM_DP, /* Packet Queue ManagerDrop Probability Register */ ++// XRX200_PQM_DP_DPROB, /* Drop Probability Profile */ ++// XRX200_PQM_RS, /* Packet Queue ManagerRate Shaper Assignment Register */ ++// XRX200_PQM_RS_EN2, /* Rate Shaper 2 Enable */ ++// XRX200_PQM_RS_RS2, /* Rate Shaper 2 */ ++// XRX200_PQM_RS_EN1, /* Rate Shaper 1 Enable */ ++// XRX200_PQM_RS_RS1, /* Rate Shaper 1 */ ++// XRX200_RS_CTRL, /* Rate Shaper ControlRegister */ ++// XRX200_RS_CTRL_RSEN, /* Rate Shaper Enable */ ++// XRX200_RS_CBS, /* Rate Shaper CommittedBurst Size Register */ ++// XRX200_RS_CBS_CBS, /* Committed Burst Size */ ++// XRX200_RS_IBS, /* Rate Shaper InstantaneousBurst Size Register */ ++// XRX200_RS_IBS_IBS, /* Instantaneous Burst Size */ ++// XRX200_RS_CIR_EXP, /* Rate Shaper RateExponent Register */ ++// XRX200_RS_CIR_EXP_EXP, /* Exponent */ ++// XRX200_RS_CIR_MANT, /* Rate Shaper RateMantissa Register */ ++// XRX200_RS_CIR_MANT_MANT, /* Mantissa */ ++ XRX200_PCE_TBL_KEY_7, /* Table Key Data 7 */ ++// XRX200_PCE_TBL_KEY_7_KEY7, /* Key Value[15:0] */ ++ XRX200_PCE_TBL_KEY_6, /* Table Key Data 6 */ ++// XRX200_PCE_TBL_KEY_6_KEY6, /* Key Value[15:0] */ ++ XRX200_PCE_TBL_KEY_5, /* Table Key Data 5 */ ++// XRX200_PCE_TBL_KEY_5_KEY5, /* Key Value[15:0] */ ++ XRX200_PCE_TBL_KEY_4, /* Table Key Data 4 */ ++// XRX200_PCE_TBL_KEY_4_KEY4, /* Key Value[15:0] */ ++ XRX200_PCE_TBL_KEY_3, /* Table Key Data 3 */ ++// XRX200_PCE_TBL_KEY_3_KEY3, /* Key Value[15:0] */ ++ XRX200_PCE_TBL_KEY_2, /* Table Key Data 2 */ ++// XRX200_PCE_TBL_KEY_2_KEY2, /* Key Value[15:0] */ ++ XRX200_PCE_TBL_KEY_1, /* Table Key Data 1 */ ++// XRX200_PCE_TBL_KEY_1_KEY1, /* Key Value[31:16] */ ++ XRX200_PCE_TBL_KEY_0, /* Table Key Data 0 */ ++// XRX200_PCE_TBL_KEY_0_KEY0, /* Key Value[15:0] */ ++ XRX200_PCE_TBL_MASK_0, /* Table Mask Write Register0 */ ++// XRX200_PCE_TBL_MASK_0_MASK0, /* Mask Pattern [15:0] */ ++ XRX200_PCE_TBL_VAL_4, /* Table Value Register4 */ ++// XRX200_PCE_TBL_VAL_4_VAL4, /* Data value [15:0] */ ++ XRX200_PCE_TBL_VAL_3, /* Table Value Register3 */ ++// XRX200_PCE_TBL_VAL_3_VAL3, /* Data value [15:0] */ ++ XRX200_PCE_TBL_VAL_2, /* Table Value Register2 */ ++// XRX200_PCE_TBL_VAL_2_VAL2, /* Data value [15:0] */ ++ XRX200_PCE_TBL_VAL_1, /* Table Value Register1 */ ++// XRX200_PCE_TBL_VAL_1_VAL1, /* Data value [15:0] */ ++ XRX200_PCE_TBL_VAL_0, /* Table Value Register0 */ ++// XRX200_PCE_TBL_VAL_0_VAL0, /* Data value [15:0] */ ++// XRX200_PCE_TBL_ADDR, /* Table Entry AddressRegister */ ++ XRX200_PCE_TBL_ADDR_ADDR, /* Table Address */ ++// XRX200_PCE_TBL_CTRL, /* Table Access ControlRegister */ ++ XRX200_PCE_TBL_CTRL_BAS, /* Access Busy/Access Start */ ++ XRX200_PCE_TBL_CTRL_TYPE, /* Lookup Entry Type */ ++ XRX200_PCE_TBL_CTRL_VLD, /* Lookup Entry Valid */ ++ XRX200_PCE_TBL_CTRL_GMAP, /* Group Map */ ++ XRX200_PCE_TBL_CTRL_OPMOD, /* Lookup Table Access Operation Mode */ ++ XRX200_PCE_TBL_CTRL_ADDR, /* Lookup Table Address */ ++// XRX200_PCE_TBL_STAT, /* Table General StatusRegister */ ++// XRX200_PCE_TBL_STAT_TBUSY, /* Table Access Busy */ ++// XRX200_PCE_TBL_STAT_TEMPT, /* Table Empty */ ++// XRX200_PCE_TBL_STAT_TFUL, /* Table Full */ ++// XRX200_PCE_AGE_0, /* Aging Counter ConfigurationRegister 0 */ ++// XRX200_PCE_AGE_0_EXP, /* Aging Counter Exponent Value */ ++// XRX200_PCE_AGE_1, /* Aging Counter ConfigurationRegister 1 */ ++// XRX200_PCE_AGE_1_MANT, /* Aging Counter Mantissa Value */ ++// XRX200_PCE_PMAP_1, /* Port Map Register 1 */ ++// XRX200_PCE_PMAP_1_MPMAP, /* Monitoring Port Map */ ++// XRX200_PCE_PMAP_2, /* Port Map Register 2 */ ++// XRX200_PCE_PMAP_2_DMCPMAP, /* Default Multicast Port Map */ ++// XRX200_PCE_PMAP_3, /* Port Map Register 3 */ ++// XRX200_PCE_PMAP_3_UUCMAP, /* Default Unknown Unicast Port Map */ ++// XRX200_PCE_GCTRL_0, /* PCE Global Control Register0 */ ++// XRX200_PCE_GCTRL_0_IGMP, /* IGMP Mode Selection */ ++ XRX200_PCE_GCTRL_0_VLAN, /* VLAN-aware Switching */ ++// XRX200_PCE_GCTRL_0_NOPM, /* No Port Map Forwarding */ ++// XRX200_PCE_GCTRL_0_SCONUC, /* Unknown Unicast Storm Control */ ++// XRX200_PCE_GCTRL_0_SCONMC, /* Multicast Storm Control */ ++// XRX200_PCE_GCTRL_0_SCONBC, /* Broadcast Storm Control */ ++// XRX200_PCE_GCTRL_0_SCONMOD, /* Storm Control Mode */ ++// XRX200_PCE_GCTRL_0_SCONMET, /* Storm Control Metering Instance */ ++// XRX200_PCE_GCTRL_0_MC_VALID, /* Access Request */ ++// XRX200_PCE_GCTRL_0_PLCKMOD, /* Port Lock Mode */ ++// XRX200_PCE_GCTRL_0_PLIMMOD, /* MAC Address Learning Limitation Mode */ ++// XRX200_PCE_GCTRL_0_MTFL, /* MAC Table Flushing */ ++// XRX200_PCE_GCTRL_1, /* PCE Global Control Register1 */ ++// XRX200_PCE_GCTRL_1_PCE_DIS, /* PCE Disable after currently processed packet */ ++// XRX200_PCE_GCTRL_1_LRNMOD, /* MAC Address Learning Mode */ ++// XRX200_PCE_TCM_GLOB_CTRL, /* Three-color MarkerGlobal Control Register */ ++// XRX200_PCE_TCM_GLOB_CTRL_DPRED, /* Re-marking Drop Precedence Red Encoding */ ++// XRX200_PCE_TCM_GLOB_CTRL_DPYEL, /* Re-marking Drop Precedence Yellow Encoding */ ++// XRX200_PCE_TCM_GLOB_CTRL_DPGRN, /* Re-marking Drop Precedence Green Encoding */ ++// XRX200_PCE_IGMP_CTRL, /* IGMP Control Register */ ++// XRX200_PCE_IGMP_CTRL_FAGEEN, /* Force Aging of Table Entries Enable */ ++// XRX200_PCE_IGMP_CTRL_FLEAVE, /* Fast Leave Enable */ ++// XRX200_PCE_IGMP_CTRL_DMRTEN, /* Default Maximum Response Time Enable */ ++// XRX200_PCE_IGMP_CTRL_JASUP, /* Join Aggregation Suppression Enable */ ++// XRX200_PCE_IGMP_CTRL_REPSUP, /* Report Suppression Enable */ ++// XRX200_PCE_IGMP_CTRL_SRPEN, /* Snooping of Router Port Enable */ ++// XRX200_PCE_IGMP_CTRL_ROB, /* Robustness Variable */ ++// XRX200_PCE_IGMP_CTRL_DMRT, /* IGMP Default Maximum Response Time */ ++// XRX200_PCE_IGMP_DRPM, /* IGMP Default RouterPort Map Register */ ++// XRX200_PCE_IGMP_DRPM_DRPM, /* IGMP Default Router Port Map */ ++// XRX200_PCE_IGMP_AGE_0, /* IGMP Aging Register0 */ ++// XRX200_PCE_IGMP_AGE_0_MANT, /* IGMP Group Aging Time Mantissa */ ++// XRX200_PCE_IGMP_AGE_0_EXP, /* IGMP Group Aging Time Exponent */ ++// XRX200_PCE_IGMP_AGE_1, /* IGMP Aging Register1 */ ++// XRX200_PCE_IGMP_AGE_1_MANT, /* IGMP Router Port Aging Time Mantissa */ ++// XRX200_PCE_IGMP_STAT, /* IGMP Status Register */ ++// XRX200_PCE_IGMP_STAT_IGPM, /* IGMP Port Map */ ++// XRX200_WOL_GLB_CTRL, /* Wake-on-LAN ControlRegister */ ++// XRX200_WOL_GLB_CTRL_PASSEN, /* WoL Password Enable */ ++// XRX200_WOL_DA_0, /* Wake-on-LAN DestinationAddress Register 0 */ ++// XRX200_WOL_DA_0_DA0, /* WoL Destination Address [15:0] */ ++// XRX200_WOL_DA_1, /* Wake-on-LAN DestinationAddress Register 1 */ ++// XRX200_WOL_DA_1_DA1, /* WoL Destination Address [31:16] */ ++// XRX200_WOL_DA_2, /* Wake-on-LAN DestinationAddress Register 2 */ ++// XRX200_WOL_DA_2_DA2, /* WoL Destination Address [47:32] */ ++// XRX200_WOL_PW_0, /* Wake-on-LAN Password Register0 */ ++// XRX200_WOL_PW_0_PW0, /* WoL Password [15:0] */ ++// XRX200_WOL_PW_1, /* Wake-on-LAN Password Register1 */ ++// XRX200_WOL_PW_1_PW1, /* WoL Password [31:16] */ ++// XRX200_WOL_PW_2, /* Wake-on-LAN Password Register2 */ ++// XRX200_WOL_PW_2_PW2, /* WoL Password [47:32] */ ++// XRX200_PCE_IER_0_PINT, /* Parser and ClassificationEngine Global Interrupt Enable Register 0 */ ++// XRX200_PCE_IER_0_PINT_15, /* Port Interrupt Enable */ ++// XRX200_PCE_IER_0_PINT_14, /* Port Interrupt Enable */ ++// XRX200_PCE_IER_0_PINT_13, /* Port Interrupt Enable */ ++// XRX200_PCE_IER_0_PINT_12, /* Port Interrupt Enable */ ++// XRX200_PCE_IER_0_PINT_11, /* Port Interrupt Enable */ ++// XRX200_PCE_IER_0_PINT_10, /* Port Interrupt Enable */ ++// XRX200_PCE_IER_0_PINT_9, /* Port Interrupt Enable */ ++// XRX200_PCE_IER_0_PINT_8, /* Port Interrupt Enable */ ++// XRX200_PCE_IER_0_PINT_7, /* Port Interrupt Enable */ ++// XRX200_PCE_IER_0_PINT_6, /* Port Interrupt Enable */ ++// XRX200_PCE_IER_0_PINT_5, /* Port Interrupt Enable */ ++// XRX200_PCE_IER_0_PINT_4, /* Port Interrupt Enable */ ++// XRX200_PCE_IER_0_PINT_3, /* Port Interrupt Enable */ ++// XRX200_PCE_IER_0_PINT_2, /* Port Interrupt Enable */ ++// XRX200_PCE_IER_0_PINT_1, /* Port Interrupt Enable */ ++// XRX200_PCE_IER_0_PINT_0, /* Port Interrupt Enable */ ++// XRX200_PCE_IER_1, /* Parser and ClassificationEngine Global Interrupt Enable Register 1 */ ++// XRX200_PCE_IER_1_FLOWINT, /* Traffic Flow Table Interrupt Rule matched Interrupt Enable */ ++// XRX200_PCE_IER_1_CPH2, /* Classification Phase 2 Ready Interrupt Enable */ ++// XRX200_PCE_IER_1_CPH1, /* Classification Phase 1 Ready Interrupt Enable */ ++// XRX200_PCE_IER_1_CPH0, /* Classification Phase 0 Ready Interrupt Enable */ ++// XRX200_PCE_IER_1_PRDY, /* Parser Ready Interrupt Enable */ ++// XRX200_PCE_IER_1_IGTF, /* IGMP Table Full Interrupt Enable */ ++// XRX200_PCE_IER_1_MTF, /* MAC Table Full Interrupt Enable */ ++// XRX200_PCE_ISR_0_PINT, /* Parser and ClassificationEngine Global Interrupt Status Register 0 */ ++// XRX200_PCE_ISR_0_PINT_15, /* Port Interrupt */ ++// XRX200_PCE_ISR_0_PINT_14, /* Port Interrupt */ ++// XRX200_PCE_ISR_0_PINT_13, /* Port Interrupt */ ++// XRX200_PCE_ISR_0_PINT_12, /* Port Interrupt */ ++// XRX200_PCE_ISR_0_PINT_11, /* Port Interrupt */ ++// XRX200_PCE_ISR_0_PINT_10, /* Port Interrupt */ ++// XRX200_PCE_ISR_0_PINT_9, /* Port Interrupt */ ++// XRX200_PCE_ISR_0_PINT_8, /* Port Interrupt */ ++// XRX200_PCE_ISR_0_PINT_7, /* Port Interrupt */ ++// XRX200_PCE_ISR_0_PINT_6, /* Port Interrupt */ ++// XRX200_PCE_ISR_0_PINT_5, /* Port Interrupt */ ++// XRX200_PCE_ISR_0_PINT_4, /* Port Interrupt */ ++// XRX200_PCE_ISR_0_PINT_3, /* Port Interrupt */ ++// XRX200_PCE_ISR_0_PINT_2, /* Port Interrupt */ ++// XRX200_PCE_ISR_0_PINT_1, /* Port Interrupt */ ++// XRX200_PCE_ISR_0_PINT_0, /* Port Interrupt */ ++// XRX200_PCE_ISR_1, /* Parser and ClassificationEngine Global Interrupt Status Register 1 */ ++// XRX200_PCE_ISR_1_FLOWINT, /* Traffic Flow Table Interrupt Rule matched */ ++// XRX200_PCE_ISR_1_CPH2, /* Classification Phase 2 Ready Interrupt */ ++// XRX200_PCE_ISR_1_CPH1, /* Classification Phase 1 Ready Interrupt */ ++// XRX200_PCE_ISR_1_CPH0, /* Classification Phase 0 Ready Interrupt */ ++// XRX200_PCE_ISR_1_PRDY, /* Parser Ready Interrupt */ ++// XRX200_PCE_ISR_1_IGTF, /* IGMP Table Full Interrupt */ ++// XRX200_PCE_ISR_1_MTF, /* MAC Table Full Interrupt */ ++// XRX200_PARSER_STAT_FIFO, /* Parser Status Register */ ++// XRX200_PARSER_STAT_FSM_DAT_CNT, /* Parser FSM Data Counter */ ++// XRX200_PARSER_STAT_FSM_STATE, /* Parser FSM State */ ++// XRX200_PARSER_STAT_PKT_ERR, /* Packet error detected */ ++// XRX200_PARSER_STAT_FSM_FIN, /* Parser FSM finished */ ++// XRX200_PARSER_STAT_FSM_START, /* Parser FSM start */ ++// XRX200_PARSER_STAT_FIFO_RDY, /* Parser FIFO ready for read. */ ++// XRX200_PARSER_STAT_FIFO_FULL, /* Parser */ ++// XRX200_PCE_PCTRL_0, /* PCE Port ControlRegister 0 */ ++// XRX200_PCE_PCTRL_0_MCST, /* Multicast Forwarding Mode Selection */ ++// XRX200_PCE_PCTRL_0_EGSTEN, /* Table-based Egress Special Tag Enable */ ++// XRX200_PCE_PCTRL_0_IGSTEN, /* Ingress Special Tag Enable */ ++// XRX200_PCE_PCTRL_0_PCPEN, /* PCP Remarking Mode */ ++// XRX200_PCE_PCTRL_0_CLPEN, /* Class Remarking Mode */ ++// XRX200_PCE_PCTRL_0_DPEN, /* Drop Precedence Remarking Mode */ ++// XRX200_PCE_PCTRL_0_CMOD, /* Three-color Marker Color Mode */ ++// XRX200_PCE_PCTRL_0_VREP, /* VLAN Replacement Mode */ ++ XRX200_PCE_PCTRL_0_TVM, /* Transparent VLAN Mode */ ++// XRX200_PCE_PCTRL_0_PLOCK, /* Port Locking Enable */ ++// XRX200_PCE_PCTRL_0_AGEDIS, /* Aging Disable */ ++// XRX200_PCE_PCTRL_0_PSTATE, /* Port State */ ++// XRX200_PCE_PCTRL_1, /* PCE Port ControlRegister 1 */ ++// XRX200_PCE_PCTRL_1_LRNLIM, /* MAC Address Learning Limit */ ++// XRX200_PCE_PCTRL_2, /* PCE Port ControlRegister 2 */ ++// XRX200_PCE_PCTRL_2_DSCPMOD, /* DSCP Mode Selection */ ++// XRX200_PCE_PCTRL_2_DSCP, /* Enable DSCP to select the Class of Service */ ++// XRX200_PCE_PCTRL_2_PCP, /* Enable VLAN PCP to select the Class of Service */ ++// XRX200_PCE_PCTRL_2_PCLASS, /* Port-based Traffic Class */ ++// XRX200_PCE_PCTRL_3_VIO, /* PCE Port ControlRegister 3 */ ++// XRX200_PCE_PCTRL_3_EDIR, /* Egress Redirection Mode */ ++// XRX200_PCE_PCTRL_3_RXDMIR, /* Receive Mirroring Enable for dropped frames */ ++// XRX200_PCE_PCTRL_3_RXVMIR, /* Receive Mirroring Enable for valid frames */ ++// XRX200_PCE_PCTRL_3_TXMIR, /* Transmit Mirroring Enable */ ++// XRX200_PCE_PCTRL_3_VIO_7, /* Violation Type 7 Mirroring Enable */ ++// XRX200_PCE_PCTRL_3_VIO_6, /* Violation Type 6 Mirroring Enable */ ++// XRX200_PCE_PCTRL_3_VIO_5, /* Violation Type 5 Mirroring Enable */ ++// XRX200_PCE_PCTRL_3_VIO_4, /* Violation Type 4 Mirroring Enable */ ++// XRX200_PCE_PCTRL_3_VIO_3, /* Violation Type 3 Mirroring Enable */ ++// XRX200_PCE_PCTRL_3_VIO_2, /* Violation Type 2 Mirroring Enable */ ++// XRX200_PCE_PCTRL_3_VIO_1, /* Violation Type 1 Mirroring Enable */ ++// XRX200_PCE_PCTRL_3_VIO_0, /* Violation Type 0 Mirroring Enable */ ++// XRX200_WOL_CTRL, /* Wake-on-LAN ControlRegister */ ++// XRX200_WOL_CTRL_PORT, /* WoL Enable */ ++// XRX200_PCE_VCTRL, /* PCE VLAN ControlRegister */ ++ XRX200_PCE_VCTRL_VSR, /* VLAN Security Rule */ ++ XRX200_PCE_VCTRL_VEMR, /* VLAN Egress Member Violation Rule */ ++ XRX200_PCE_VCTRL_VIMR, /* VLAN Ingress Member Violation Rule */ ++ XRX200_PCE_VCTRL_VINR, /* VLAN Ingress Tag Rule */ ++ XRX200_PCE_VCTRL_UVR, /* Unknown VLAN Rule */ ++// XRX200_PCE_DEFPVID, /* PCE Default PortVID Register */ ++ XRX200_PCE_DEFPVID_PVID, /* Default Port VID Index */ ++// XRX200_PCE_PSTAT, /* PCE Port StatusRegister */ ++// XRX200_PCE_PSTAT_LRNCNT, /* Learning Count */ ++// XRX200_PCE_PIER, /* Parser and ClassificationEngine Port Interrupt Enable Register */ ++// XRX200_PCE_PIER_CLDRP, /* Classification Drop Interrupt Enable */ ++// XRX200_PCE_PIER_PTDRP, /* Port Drop Interrupt Enable */ ++// XRX200_PCE_PIER_VLAN, /* VLAN Violation Interrupt Enable */ ++// XRX200_PCE_PIER_WOL, /* Wake-on-LAN Interrupt Enable */ ++// XRX200_PCE_PIER_LOCK, /* Port Limit Alert Interrupt Enable */ ++// XRX200_PCE_PIER_LIM, /* Port Lock Alert Interrupt Enable */ ++// XRX200_PCE_PISR, /* Parser and ClassificationEngine Port Interrupt Status Register */ ++// XRX200_PCE_PISR_CLDRP, /* Classification Drop Interrupt */ ++// XRX200_PCE_PISR_PTDRP, /* Port Drop Interrupt */ ++// XRX200_PCE_PISR_VLAN, /* VLAN Violation Interrupt */ ++// XRX200_PCE_PISR_WOL, /* Wake-on-LAN Interrupt */ ++// XRX200_PCE_PISR_LOCK, /* Port Lock Alert Interrupt */ ++// XRX200_PCE_PISR_LIMIT, /* Port Limitation Alert Interrupt */ ++// XRX200_PCE_TCM_CTRL, /* Three-colorMarker Control Register */ ++// XRX200_PCE_TCM_CTRL_TCMEN, /* Three-color Marker metering instance enable */ ++// XRX200_PCE_TCM_STAT, /* Three-colorMarker Status Register */ ++// XRX200_PCE_TCM_STAT_AL1, /* Three-color Marker Alert 1 Status */ ++// XRX200_PCE_TCM_STAT_AL0, /* Three-color Marker Alert 0 Status */ ++// XRX200_PCE_TCM_CBS, /* Three-color MarkerCommitted Burst Size Register */ ++// XRX200_PCE_TCM_CBS_CBS, /* Committed Burst Size */ ++// XRX200_PCE_TCM_EBS, /* Three-color MarkerExcess Burst Size Register */ ++// XRX200_PCE_TCM_EBS_EBS, /* Excess Burst Size */ ++// XRX200_PCE_TCM_IBS, /* Three-color MarkerInstantaneous Burst Size Register */ ++// XRX200_PCE_TCM_IBS_IBS, /* Instantaneous Burst Size */ ++// XRX200_PCE_TCM_CIR_MANT, /* Three-colorMarker Constant Information Rate Mantissa Register */ ++// XRX200_PCE_TCM_CIR_MANT_MANT, /* Rate Counter Mantissa */ ++// XRX200_PCE_TCM_CIR_EXP, /* Three-colorMarker Constant Information Rate Exponent Register */ ++// XRX200_PCE_TCM_CIR_EXP_EXP, /* Rate Counter Exponent */ ++// XRX200_MAC_TEST, /* MAC Test Register */ ++// XRX200_MAC_TEST_JTP, /* Jitter Test Pattern */ ++// XRX200_MAC_PFAD_CFG, /* MAC Pause FrameSource Address Configuration Register */ ++// XRX200_MAC_PFAD_CFG_SAMOD, /* Source Address Mode */ ++// XRX200_MAC_PFSA_0, /* Pause Frame SourceAddress Part 0 */ ++// XRX200_MAC_PFSA_0_PFAD, /* Pause Frame Source Address Part 0 */ ++// XRX200_MAC_PFSA_1, /* Pause Frame SourceAddress Part 1 */ ++// XRX200_MAC_PFSA_1_PFAD, /* Pause Frame Source Address Part 1 */ ++// XRX200_MAC_PFSA_2, /* Pause Frame SourceAddress Part 2 */ ++// XRX200_MAC_PFSA_2_PFAD, /* Pause Frame Source Address Part 2 */ ++// XRX200_MAC_FLEN, /* MAC Frame Length Register */ ++// XRX200_MAC_FLEN_LEN, /* Maximum Frame Length */ ++// XRX200_MAC_VLAN_ETYPE_0, /* MAC VLAN EthertypeRegister 0 */ ++// XRX200_MAC_VLAN_ETYPE_0_OUTER, /* Ethertype */ ++// XRX200_MAC_VLAN_ETYPE_1, /* MAC VLAN EthertypeRegister 1 */ ++// XRX200_MAC_VLAN_ETYPE_1_INNER, /* Ethertype */ ++// XRX200_MAC_IER, /* MAC Interrupt EnableRegister */ ++// XRX200_MAC_IER_MACIEN, /* MAC Interrupt Enable */ ++// XRX200_MAC_ISR, /* MAC Interrupt StatusRegister */ ++// XRX200_MAC_ISR_MACINT, /* MAC Interrupt */ ++// XRX200_MAC_PSTAT, /* MAC Port Status Register */ ++// XRX200_MAC_PSTAT_PACT, /* PHY Active Status */ ++ XRX200_MAC_PSTAT_GBIT, /* Gigabit Speed Status */ ++ XRX200_MAC_PSTAT_MBIT, /* Megabit Speed Status */ ++ XRX200_MAC_PSTAT_FDUP, /* Full Duplex Status */ ++// XRX200_MAC_PSTAT_RXPAU, /* Receive Pause Status */ ++// XRX200_MAC_PSTAT_TXPAU, /* Transmit Pause Status */ ++// XRX200_MAC_PSTAT_RXPAUEN, /* Receive Pause Enable Status */ ++// XRX200_MAC_PSTAT_TXPAUEN, /* Transmit Pause Enable Status */ ++ XRX200_MAC_PSTAT_LSTAT, /* Link Status */ ++// XRX200_MAC_PSTAT_CRS, /* Carrier Sense Status */ ++// XRX200_MAC_PSTAT_TXLPI, /* Transmit Low-power Idle Status */ ++// XRX200_MAC_PSTAT_RXLPI, /* Receive Low-power Idle Status */ ++// XRX200_MAC_PISR, /* MAC Interrupt Status Register */ ++// XRX200_MAC_PISR_PACT, /* PHY Active Status */ ++// XRX200_MAC_PISR_SPEED, /* Megabit Speed Status */ ++// XRX200_MAC_PISR_FDUP, /* Full Duplex Status */ ++// XRX200_MAC_PISR_RXPAUEN, /* Receive Pause Enable Status */ ++// XRX200_MAC_PISR_TXPAUEN, /* Transmit Pause Enable Status */ ++// XRX200_MAC_PISR_LPIOFF, /* Receive Low-power Idle Mode is left */ ++// XRX200_MAC_PISR_LPION, /* Receive Low-power Idle Mode is entered */ ++// XRX200_MAC_PISR_JAM, /* Jam Status Detected */ ++// XRX200_MAC_PISR_TOOSHORT, /* Too Short Frame Error Detected */ ++// XRX200_MAC_PISR_TOOLONG, /* Too Long Frame Error Detected */ ++// XRX200_MAC_PISR_LENERR, /* Length Mismatch Error Detected */ ++// XRX200_MAC_PISR_FCSERR, /* Frame Checksum Error Detected */ ++// XRX200_MAC_PISR_TXPAUSE, /* Pause Frame Transmitted */ ++// XRX200_MAC_PISR_RXPAUSE, /* Pause Frame Received */ ++// XRX200_MAC_PIER, /* MAC Interrupt Enable Register */ ++// XRX200_MAC_PIER_PACT, /* PHY Active Status */ ++// XRX200_MAC_PIER_SPEED, /* Megabit Speed Status */ ++// XRX200_MAC_PIER_FDUP, /* Full Duplex Status */ ++// XRX200_MAC_PIER_RXPAUEN, /* Receive Pause Enable Status */ ++// XRX200_MAC_PIER_TXPAUEN, /* Transmit Pause Enable Status */ ++// XRX200_MAC_PIER_LPIOFF, /* Low-power Idle Off Interrupt Mask */ ++// XRX200_MAC_PIER_LPION, /* Low-power Idle On Interrupt Mask */ ++// XRX200_MAC_PIER_JAM, /* Jam Status Interrupt Mask */ ++// XRX200_MAC_PIER_TOOSHORT, /* Too Short Frame Error Interrupt Mask */ ++// XRX200_MAC_PIER_TOOLONG, /* Too Long Frame Error Interrupt Mask */ ++// XRX200_MAC_PIER_LENERR, /* Length Mismatch Error Interrupt Mask */ ++// XRX200_MAC_PIER_FCSERR, /* Frame Checksum Error Interrupt Mask */ ++// XRX200_MAC_PIER_TXPAUSE, /* Transmit Pause Frame Interrupt Mask */ ++// XRX200_MAC_PIER_RXPAUSE, /* Receive Pause Frame Interrupt Mask */ ++// XRX200_MAC_CTRL_0, /* MAC Control Register0 */ ++// XRX200_MAC_CTRL_0_LCOL, /* Late Collision Control */ ++// XRX200_MAC_CTRL_0_BM, /* Burst Mode Control */ ++// XRX200_MAC_CTRL_0_APADEN, /* Automatic VLAN Padding Enable */ ++// XRX200_MAC_CTRL_0_VPAD2EN, /* Stacked VLAN Padding Enable */ ++// XRX200_MAC_CTRL_0_VPADEN, /* VLAN Padding Enable */ ++// XRX200_MAC_CTRL_0_PADEN, /* Padding Enable */ ++// XRX200_MAC_CTRL_0_FCS, /* Transmit FCS Control */ ++ XRX200_MAC_CTRL_0_FCON, /* Flow Control Mode */ ++// XRX200_MAC_CTRL_0_FDUP, /* Full Duplex Control */ ++// XRX200_MAC_CTRL_0_GMII, /* GMII/MII interface mode selection */ ++// XRX200_MAC_CTRL_1, /* MAC Control Register1 */ ++// XRX200_MAC_CTRL_1_SHORTPRE, /* Short Preamble Control */ ++// XRX200_MAC_CTRL_1_IPG, /* Minimum Inter Packet Gap Size */ ++// XRX200_MAC_CTRL_2, /* MAC Control Register2 */ ++// XRX200_MAC_CTRL_2_MLEN, /* Maximum Untagged Frame Length */ ++// XRX200_MAC_CTRL_2_LCHKL, /* Frame Length Check Long Enable */ ++// XRX200_MAC_CTRL_2_LCHKS, /* Frame Length Check Short Enable */ ++// XRX200_MAC_CTRL_3, /* MAC Control Register3 */ ++// XRX200_MAC_CTRL_3_RCNT, /* Retry Count */ ++// XRX200_MAC_CTRL_4, /* MAC Control Register4 */ ++// XRX200_MAC_CTRL_4_LPIEN, /* LPI Mode Enable */ ++// XRX200_MAC_CTRL_4_WAIT, /* LPI Wait Time */ ++// XRX200_MAC_CTRL_5_PJPS, /* MAC Control Register5 */ ++// XRX200_MAC_CTRL_5_PJPS_NOBP, /* Prolonged Jam pattern size during no-backpressure state */ ++// XRX200_MAC_CTRL_5_PJPS_BP, /* Prolonged Jam pattern size during backpressure state */ ++// XRX200_MAC_CTRL_6_XBUF, /* Transmit and ReceiveBuffer Control Register */ ++// XRX200_MAC_CTRL_6_RBUF_DLY_WP, /* Delay */ ++// XRX200_MAC_CTRL_6_RBUF_INIT, /* Receive Buffer Initialization */ ++// XRX200_MAC_CTRL_6_RBUF_BYPASS, /* Bypass the Receive Buffer */ ++// XRX200_MAC_CTRL_6_XBUF_DLY_WP, /* Delay */ ++// XRX200_MAC_CTRL_6_XBUF_INIT, /* Initialize the Transmit Buffer */ ++// XRX200_MAC_CTRL_6_XBUF_BYPASS, /* Bypass the Transmit Buffer */ ++// XRX200_MAC_BUFST_XBUF, /* MAC Receive and TransmitBuffer Status Register */ ++// XRX200_MAC_BUFST_RBUF_UFL, /* Receive Buffer Underflow Indicator */ ++// XRX200_MAC_BUFST_RBUF_OFL, /* Receive Buffer Overflow Indicator */ ++// XRX200_MAC_BUFST_XBUF_UFL, /* Transmit Buffer Underflow Indicator */ ++// XRX200_MAC_BUFST_XBUF_OFL, /* Transmit Buffer Overflow Indicator */ ++// XRX200_MAC_TESTEN, /* MAC Test Enable Register */ ++// XRX200_MAC_TESTEN_JTEN, /* Jitter Test Enable */ ++// XRX200_MAC_TESTEN_TXER, /* Transmit Error Insertion */ ++// XRX200_MAC_TESTEN_LOOP, /* MAC Loopback Enable */ ++// XRX200_FDMA_CTRL, /* Ethernet Switch FetchDMA Control Register */ ++// XRX200_FDMA_CTRL_LPI_THRESHOLD, /* Low Power Idle Threshold */ ++// XRX200_FDMA_CTRL_LPI_MODE, /* Low Power Idle Mode */ ++// XRX200_FDMA_CTRL_EGSTAG, /* Egress Special Tag Size */ ++// XRX200_FDMA_CTRL_IGSTAG, /* Ingress Special Tag Size */ ++// XRX200_FDMA_CTRL_EXCOL, /* Excessive Collision Handling */ ++// XRX200_FDMA_STETYPE, /* Special Tag EthertypeControl Register */ ++// XRX200_FDMA_STETYPE_ETYPE, /* Special Tag Ethertype */ ++// XRX200_FDMA_VTETYPE, /* VLAN Tag EthertypeControl Register */ ++// XRX200_FDMA_VTETYPE_ETYPE, /* VLAN Tag Ethertype */ ++// XRX200_FDMA_STAT_0, /* FDMA Status Register0 */ ++// XRX200_FDMA_STAT_0_FSMS, /* FSM states status */ ++// XRX200_FDMA_IER, /* Fetch DMA Global InterruptEnable Register */ ++// XRX200_FDMA_IER_PCKD, /* Packet Drop Interrupt Enable */ ++// XRX200_FDMA_IER_PCKR, /* Packet Ready Interrupt Enable */ ++// XRX200_FDMA_IER_PCKT, /* Packet Sent Interrupt Enable */ ++// XRX200_FDMA_ISR, /* Fetch DMA Global InterruptStatus Register */ ++// XRX200_FDMA_ISR_PCKTD, /* Packet Drop */ ++// XRX200_FDMA_ISR_PCKR, /* Packet is Ready for Transmission */ ++// XRX200_FDMA_ISR_PCKT, /* Packet Sent Event */ ++// XRX200_FDMA_PCTRL, /* Ethernet SwitchFetch DMA Port Control Register */ ++// XRX200_FDMA_PCTRL_VLANMOD, /* VLAN Modification Enable */ ++// XRX200_FDMA_PCTRL_DSCPRM, /* DSCP Re-marking Enable */ ++// XRX200_FDMA_PCTRL_STEN, /* Special Tag Insertion Enable */ ++// XRX200_FDMA_PCTRL_EN, /* FDMA Port Enable */ ++// XRX200_FDMA_PRIO, /* Ethernet SwitchFetch DMA Port Priority Register */ ++// XRX200_FDMA_PRIO_PRIO, /* FDMA PRIO */ ++// XRX200_FDMA_PSTAT0, /* Ethernet SwitchFetch DMA Port Status Register 0 */ ++// XRX200_FDMA_PSTAT0_PKT_AVAIL, /* Port Egress Packet Available */ ++// XRX200_FDMA_PSTAT0_POK, /* Port Status OK */ ++// XRX200_FDMA_PSTAT0_PSEG, /* Port Egress Segment Count */ ++// XRX200_FDMA_PSTAT1_HDR, /* Ethernet SwitchFetch DMA Port Status Register 1 */ ++// XRX200_FDMA_PSTAT1_HDR_PTR, /* Header Pointer */ ++// XRX200_FDMA_TSTAMP0, /* Egress TimeStamp Register 0 */ ++// XRX200_FDMA_TSTAMP0_TSTL, /* Time Stamp [15:0] */ ++// XRX200_FDMA_TSTAMP1, /* Egress TimeStamp Register 1 */ ++// XRX200_FDMA_TSTAMP1_TSTH, /* Time Stamp [31:16] */ ++// XRX200_SDMA_CTRL, /* Ethernet Switch StoreDMA Control Register */ ++// XRX200_SDMA_CTRL_TSTEN, /* Time Stamp Enable */ ++// XRX200_SDMA_FCTHR1, /* SDMA Flow Control Threshold1 Register */ ++// XRX200_SDMA_FCTHR1_THR1, /* Threshold 1 */ ++// XRX200_SDMA_FCTHR2, /* SDMA Flow Control Threshold2 Register */ ++// XRX200_SDMA_FCTHR2_THR2, /* Threshold 2 */ ++// XRX200_SDMA_FCTHR3, /* SDMA Flow Control Threshold3 Register */ ++// XRX200_SDMA_FCTHR3_THR3, /* Threshold 3 */ ++// XRX200_SDMA_FCTHR4, /* SDMA Flow Control Threshold4 Register */ ++// XRX200_SDMA_FCTHR4_THR4, /* Threshold 4 */ ++// XRX200_SDMA_FCTHR5, /* SDMA Flow Control Threshold5 Register */ ++// XRX200_SDMA_FCTHR5_THR5, /* Threshold 5 */ ++// XRX200_SDMA_FCTHR6, /* SDMA Flow Control Threshold6 Register */ ++// XRX200_SDMA_FCTHR6_THR6, /* Threshold 6 */ ++// XRX200_SDMA_FCTHR7, /* SDMA Flow Control Threshold7 Register */ ++// XRX200_SDMA_FCTHR7_THR7, /* Threshold 7 */ ++// XRX200_SDMA_STAT_0, /* SDMA Status Register0 */ ++// XRX200_SDMA_STAT_0_BPS_FILL, /* Back Pressure Status */ ++// XRX200_SDMA_STAT_0_BPS_PNT, /* Back Pressure Status */ ++// XRX200_SDMA_STAT_0_DROP, /* Back Pressure Status */ ++// XRX200_SDMA_STAT_1, /* SDMA Status Register1 */ ++// XRX200_SDMA_STAT_1_FILL, /* Buffer Filling Level */ ++// XRX200_SDMA_STAT_2, /* SDMA Status Register2 */ ++// XRX200_SDMA_STAT_2_FSMS, /* FSM states status */ ++// XRX200_SDMA_IER, /* SDMA Interrupt Enable Register */ ++// XRX200_SDMA_IER_BPEX, /* Buffer Pointers Exceeded */ ++// XRX200_SDMA_IER_BFULL, /* Buffer Full */ ++// XRX200_SDMA_IER_FERR, /* Frame Error */ ++// XRX200_SDMA_IER_FRX, /* Frame Received Successfully */ ++// XRX200_SDMA_ISR, /* SDMA Interrupt Status Register */ ++// XRX200_SDMA_ISR_BPEX, /* Packet Descriptors Exceeded */ ++// XRX200_SDMA_ISR_BFULL, /* Buffer Full */ ++// XRX200_SDMA_ISR_FERR, /* Frame Error */ ++// XRX200_SDMA_ISR_FRX, /* Frame Received Successfully */ ++// XRX200_SDMA_PCTRL, /* Ethernet SwitchStore DMA Port Control Register */ ++// XRX200_SDMA_PCTRL_DTHR, /* Drop Threshold Selection */ ++// XRX200_SDMA_PCTRL_PTHR, /* Pause Threshold Selection */ ++// XRX200_SDMA_PCTRL_PHYEFWD, /* Forward PHY Error Frames */ ++// XRX200_SDMA_PCTRL_ALGFWD, /* Forward Alignment Error Frames */ ++// XRX200_SDMA_PCTRL_LENFWD, /* Forward Length Errored Frames */ ++// XRX200_SDMA_PCTRL_OSFWD, /* Forward Oversized Frames */ ++// XRX200_SDMA_PCTRL_USFWD, /* Forward Undersized Frames */ ++// XRX200_SDMA_PCTRL_FCSIGN, /* Ignore FCS Errors */ ++// XRX200_SDMA_PCTRL_FCSFWD, /* Forward FCS Errored Frames */ ++// XRX200_SDMA_PCTRL_PAUFWD, /* Pause Frame Forwarding */ ++// XRX200_SDMA_PCTRL_MFCEN, /* Metering Flow Control Enable */ ++// XRX200_SDMA_PCTRL_FCEN, /* Flow Control Enable */ ++// XRX200_SDMA_PCTRL_PEN, /* Port Enable */ ++// XRX200_SDMA_PRIO, /* Ethernet SwitchStore DMA Port Priority Register */ ++// XRX200_SDMA_PRIO_PRIO, /* SDMA PRIO */ ++// XRX200_SDMA_PSTAT0_HDR, /* Ethernet SwitchStore DMA Port Status Register 0 */ ++// XRX200_SDMA_PSTAT0_HDR_PTR, /* Port Ingress Queue Header Pointer */ ++// XRX200_SDMA_PSTAT1, /* Ethernet SwitchStore DMA Port Status Register 1 */ ++// XRX200_SDMA_PSTAT1_PPKT, /* Port Ingress Packet Count */ ++// XRX200_SDMA_TSTAMP0, /* Ingress TimeStamp Register 0 */ ++// XRX200_SDMA_TSTAMP0_TSTL, /* Time Stamp [15:0] */ ++// XRX200_SDMA_TSTAMP1, /* Ingress TimeStamp Register 1 */ ++// XRX200_SDMA_TSTAMP1_TSTH, /* Time Stamp [31:16] */ ++}; ++ ++ ++struct xrx200sw_reg { ++ int offset; ++ int shift; ++ int size; ++ int mult; ++} xrx200sw_reg[] = { ++// offeset shift size mult ++// {0x0000, 0, 16, 0x00}, /* XRX200_ETHSW_SWRES Ethernet Switch ResetControl Register */ ++// {0x0000, 1, 1, 0x00}, /* XRX200_ETHSW_SWRES_R1 Hardware Reset */ ++// {0x0000, 0, 1, 0x00}, /* XRX200_ETHSW_SWRES_R0 Register Configuration */ ++// {0x0004, 0, 16, 0x00}, /* XRX200_ETHSW_CLK_MAC_GAT Ethernet Switch Clock ControlRegister */ ++// {0x0004, 12, 4, 0x00}, /* XRX200_ETHSW_CLK_EXP_SLEEP Exponent to put system into sleep */ ++// {0x0004, 8, 4, 0x00}, /* XRX200_ETHSW_CLK_EXP_WAKE Exponent to wake up system */ ++// {0x0004, 7, 1, 0x00}, /* XRX200_ETHSW_CLK_CLK2_EN CLK2 Input for MAC */ ++// {0x0004, 6, 1, 0x00}, /* XRX200_ETHSW_CLK_EXT_DIV_EN External Clock Divider Enable */ ++// {0x0004, 5, 1, 0x00}, /* XRX200_ETHSW_CLK_RAM_DBG_EN Clock Gating Enable */ ++// {0x0004, 4, 1, 0x00}, /* XRX200_ETHSW_CLK_REG_GAT_EN Clock Gating Enable */ ++// {0x0004, 3, 1, 0x00}, /* XRX200_ETHSW_CLK_GAT_EN Clock Gating Enable */ ++// {0x0004, 2, 1, 0x00}, /* XRX200_ETHSW_CLK_MAC_GAT_EN Clock Gating Enable */ ++// {0x0008, 0, 16, 0x00}, /* XRX200_ETHSW_DBG_STEP Ethernet Switch Debug ControlRegister */ ++// {0x0008, 12, 4, 0x00}, /* XRX200_ETHSW_DBG_CLK_SEL Trigger Enable */ ++// {0x0008, 11, 1, 0x00}, /* XRX200_ETHSW_DBG_MON_EN Monitoring Enable */ ++// {0x0008, 9, 2, 0x00}, /* XRX200_ETHSW_DBG_TRIG_EN Trigger Enable */ ++// {0x0008, 8, 1, 0x00}, /* XRX200_ETHSW_DBG_MODE Debug Mode */ ++// {0x0008, 0, 8, 0x00}, /* XRX200_ETHSW_DBG_STEP_TIME Clock Step Size */ ++// {0x000C, 0, 16, 0x00}, /* XRX200_ETHSW_SSB_MODE Ethernet Switch SharedSegment Buffer Mode Register */ ++// {0x000C, 2, 4, 0x00}, /* XRX200_ETHSW_SSB_MODE_ADDE Memory Address */ ++// {0x000C, 0, 2, 0x00}, /* XRX200_ETHSW_SSB_MODE_MODE Memory Access Mode */ ++// {0x0010, 0, 16, 0x00}, /* XRX200_ETHSW_SSB_ADDR Ethernet Switch SharedSegment Buffer Address Register */ ++// {0x0010, 0, 16, 0x00}, /* XRX200_ETHSW_SSB_ADDR_ADDE Memory Address */ ++// {0x0014, 0, 16, 0x00}, /* XRX200_ETHSW_SSB_DATA Ethernet Switch SharedSegment Buffer Data Register */ ++// {0x0014, 0, 16, 0x00}, /* XRX200_ETHSW_SSB_DATA_DATA Data Value */ ++// {0x0018, 0, 16, 0x00}, /* XRX200_ETHSW_CAP_0 Ethernet Switch CapabilityRegister 0 */ ++// {0x0018, 0, 16, 0x00}, /* XRX200_ETHSW_CAP_0_SPEED Clock frequency */ ++// {0x001C, 0, 16, 0x00}, /* XRX200_ETHSW_CAP_1 Ethernet Switch CapabilityRegister 1 */ ++// {0x001C, 15, 1, 0x00}, /* XRX200_ETHSW_CAP_1_GMAC MAC operation mode */ ++// {0x001C, 8, 7, 0x00}, /* XRX200_ETHSW_CAP_1_QUEUE Number of queues */ ++// {0x001C, 4, 4, 0x00}, /* XRX200_ETHSW_CAP_1_VPORTS Number of virtual ports */ ++// {0x001C, 0, 4, 0x00}, /* XRX200_ETHSW_CAP_1_PPORTS Number of physical ports */ ++// {0x0020, 0, 16, 0x00}, /* XRX200_ETHSW_CAP_2 Ethernet Switch CapabilityRegister 2 */ ++// {0x0020, 0, 11, 0x00}, /* XRX200_ETHSW_CAP_2_PACKETS Number of packets */ ++// {0x0024, 0, 16, 0x00}, /* XRX200_ETHSW_CAP_3 Ethernet Switch CapabilityRegister 3 */ ++// {0x0024, 8, 8, 0x00}, /* XRX200_ETHSW_CAP_3_METERS Number of traffic meters */ ++// {0x0024, 0, 8, 0x00}, /* XRX200_ETHSW_CAP_3_SHAPERS Number of traffic shapers */ ++// {0x0028, 0, 16, 0x00}, /* XRX200_ETHSW_CAP_4 Ethernet Switch CapabilityRegister 4 */ ++// {0x0028, 8, 8, 0x00}, /* XRX200_ETHSW_CAP_4_PPPOE PPPoE table size */ ++// {0x0028, 0, 8, 0x00}, /* XRX200_ETHSW_CAP_4_VLAN Active VLAN table size */ ++// {0x002C, 0, 16, 0x00}, /* XRX200_ETHSW_CAP_5 Ethernet Switch CapabilityRegister 5 */ ++// {0x002C, 8, 8, 0x00}, /* XRX200_ETHSW_CAP_5_IPPLEN IP packet length table size */ ++// {0x002C, 0, 8, 0x00}, /* XRX200_ETHSW_CAP_5_PROT Protocol table size */ ++// {0x0030, 0, 16, 0x00}, /* XRX200_ETHSW_CAP_6 Ethernet Switch CapabilityRegister 6 */ ++// {0x0030, 8, 8, 0x00}, /* XRX200_ETHSW_CAP_6_MACDASA MAC DA/SA table size */ ++// {0x0030, 0, 8, 0x00}, /* XRX200_ETHSW_CAP_6_APPL Application table size */ ++// {0x0034, 0, 16, 0x00}, /* XRX200_ETHSW_CAP_7 Ethernet Switch CapabilityRegister 7 */ ++// {0x0034, 8, 8, 0x00}, /* XRX200_ETHSW_CAP_7_IPDASAM IP DA/SA MSB table size */ ++// {0x0034, 0, 8, 0x00}, /* XRX200_ETHSW_CAP_7_IPDASAL IP DA/SA LSB table size */ ++// {0x0038, 0, 16, 0x00}, /* XRX200_ETHSW_CAP_8 Ethernet Switch CapabilityRegister 8 */ ++// {0x0038, 0, 8, 0x00}, /* XRX200_ETHSW_CAP_8_MCAST Multicast table size */ ++// {0x003C, 0, 16, 0x00}, /* XRX200_ETHSW_CAP_9 Ethernet Switch CapabilityRegister 9 */ ++// {0x003C, 0, 8, 0x00}, /* XRX200_ETHSW_CAP_9_FLAGG Flow Aggregation table size */ ++// {0x0040, 0, 16, 0x00}, /* XRX200_ETHSW_CAP_10 Ethernet Switch CapabilityRegister 10 */ ++// {0x0040, 0, 13, 0x00}, /* XRX200_ETHSW_CAP_10_MACBT MAC bridging table size */ ++// {0x0044, 0, 16, 0x00}, /* XRX200_ETHSW_CAP_11 Ethernet Switch CapabilityRegister 11 */ ++// {0x0044, 0, 16, 0x00}, /* XRX200_ETHSW_CAP_11_BSIZEL Packet buffer size (lower part, in byte) */ ++// {0x0048, 0, 16, 0x00}, /* XRX200_ETHSW_CAP_12 Ethernet Switch CapabilityRegister 12 */ ++// {0x0048, 0, 3, 0x00}, /* XRX200_ETHSW_CAP_12_BSIZEH Packet buffer size (higher part, in byte) */ ++// {0x004C, 0, 16, 0x00}, /* XRX200_ETHSW_VERSION_REV Ethernet Switch VersionRegister */ ++// {0x004C, 8, 8, 0x00}, /* XRX200_ETHSW_VERSION_MOD_ID Module Identification */ ++// {0x004C, 0, 8, 0x00}, /* XRX200_ETHSW_VERSION_REV_ID Hardware Revision Identification */ ++// {0x0050, 0, 16, 0x00}, /* XRX200_ETHSW_IER Interrupt Enable Register */ ++// {0x0050, 4, 1, 0x00}, /* XRX200_ETHSW_IER_FDMAIE Fetch DMA Interrupt Enable */ ++// {0x0050, 3, 1, 0x00}, /* XRX200_ETHSW_IER_SDMAIE Store DMA Interrupt Enable */ ++// {0x0050, 2, 1, 0x00}, /* XRX200_ETHSW_IER_MACIE Ethernet MAC Interrupt Enable */ ++// {0x0050, 1, 1, 0x00}, /* XRX200_ETHSW_IER_PCEIE Parser and Classification Engine Interrupt Enable */ ++// {0x0050, 0, 1, 0x00}, /* XRX200_ETHSW_IER_BMIE Buffer Manager Interrupt Enable */ ++// {0x0054, 0, 16, 0x00}, /* XRX200_ETHSW_ISR Interrupt Status Register */ ++// {0x0054, 4, 1, 0x00}, /* XRX200_ETHSW_ISR_FDMAINT Fetch DMA Interrupt */ ++// {0x0054, 3, 1, 0x00}, /* XRX200_ETHSW_ISR_SDMAINT Store DMA Interrupt */ ++// {0x0054, 2, 1, 0x00}, /* XRX200_ETHSW_ISR_MACINT Ethernet MAC Interrupt */ ++// {0x0054, 1, 1, 0x00}, /* XRX200_ETHSW_ISR_PCEINT Parser and Classification Engine Interrupt */ ++// {0x0054, 0, 1, 0x00}, /* XRX200_ETHSW_ISR_BMINT Buffer Manager Interrupt */ ++// {0x0058, 0, 16, 0x00}, /* XRX200_ETHSW_SPARE_0 Ethernet Switch SpareCells 0 */ ++// {0x0058, 0, 16, 0x00}, /* XRX200_ETHSW_SPARE_0_SPARE SPARE0 */ ++// {0x005C, 0, 16, 0x00}, /* XRX200_ETHSW_SPARE_1 Ethernet Switch SpareCells 1 */ ++// {0x005C, 0, 16, 0x00}, /* XRX200_ETHSW_SPARE_1_SPARE SPARE1 */ ++// {0x0060, 0, 16, 0x00}, /* XRX200_ETHSW_SPARE_2 Ethernet Switch SpareCells 2 */ ++// {0x0060, 0, 16, 0x00}, /* XRX200_ETHSW_SPARE_2_SPARE SPARE2 */ ++// {0x0064, 0, 16, 0x00}, /* XRX200_ETHSW_SPARE_3 Ethernet Switch SpareCells 3 */ ++// {0x0064, 0, 16, 0x00}, /* XRX200_ETHSW_SPARE_3_SPARE SPARE3 */ ++// {0x0068, 0, 16, 0x00}, /* XRX200_ETHSW_SPARE_4 Ethernet Switch SpareCells 4 */ ++// {0x0068, 0, 16, 0x00}, /* XRX200_ETHSW_SPARE_4_SPARE SPARE4 */ ++// {0x006C, 0, 16, 0x00}, /* XRX200_ETHSW_SPARE_5 Ethernet Switch SpareCells 5 */ ++// {0x006C, 0, 16, 0x00}, /* XRX200_ETHSW_SPARE_5_SPARE SPARE5 */ ++// {0x0070, 0, 16, 0x00}, /* XRX200_ETHSW_SPARE_6 Ethernet Switch SpareCells 6 */ ++// {0x0070, 0, 16, 0x00}, /* XRX200_ETHSW_SPARE_6_SPARE SPARE6 */ ++// {0x0074, 0, 16, 0x00}, /* XRX200_ETHSW_SPARE_7 Ethernet Switch SpareCells 7 */ ++// {0x0074, 0, 16, 0x00}, /* XRX200_ETHSW_SPARE_7_SPARE SPARE7 */ ++// {0x0078, 0, 16, 0x00}, /* XRX200_ETHSW_SPARE_8 Ethernet Switch SpareCells 8 */ ++// {0x0078, 0, 16, 0x00}, /* XRX200_ETHSW_SPARE_8_SPARE SPARE8 */ ++// {0x007C, 0, 16, 0x00}, /* XRX200_ETHSW_SPARE_9 Ethernet Switch SpareCells 9 */ ++// {0x007C, 0, 16, 0x00}, /* XRX200_ETHSW_SPARE_9_SPARE SPARE9 */ ++// {0x0080, 0, 16, 0x00}, /* XRX200_ETHSW_SPARE_10 Ethernet Switch SpareCells 10 */ ++// {0x0080, 0, 16, 0x00}, /* XRX200_ETHSW_SPARE_10_SPARE SPARE10 */ ++// {0x0084, 0, 16, 0x00}, /* XRX200_ETHSW_SPARE_11 Ethernet Switch SpareCells 11 */ ++// {0x0084, 0, 16, 0x00}, /* XRX200_ETHSW_SPARE_11_SPARE SPARE11 */ ++// {0x0088, 0, 16, 0x00}, /* XRX200_ETHSW_SPARE_12 Ethernet Switch SpareCells 12 */ ++// {0x0088, 0, 16, 0x00}, /* XRX200_ETHSW_SPARE_12_SPARE SPARE12 */ ++// {0x008C, 0, 16, 0x00}, /* XRX200_ETHSW_SPARE_13 Ethernet Switch SpareCells 13 */ ++// {0x008C, 0, 16, 0x00}, /* XRX200_ETHSW_SPARE_13_SPARE SPARE13 */ ++// {0x0090, 0, 16, 0x00}, /* XRX200_ETHSW_SPARE_14 Ethernet Switch SpareCells 14 */ ++// {0x0090, 0, 16, 0x00}, /* XRX200_ETHSW_SPARE_14_SPARE SPARE14 */ ++// {0x0094, 0, 16, 0x00}, /* XRX200_ETHSW_SPARE_15 Ethernet Switch SpareCells 15 */ ++// {0x0094, 0, 16, 0x00}, /* XRX200_ETHSW_SPARE_15_SPARE SPARE15 */ ++// {0x0100, 0, 16, 0x00}, /* XRX200_BM_RAM_VAL_3 RAM Value Register 3 */ ++// {0x0100, 0, 16, 0x00}, /* XRX200_BM_RAM_VAL_3_VAL3 Data value [15:0] */ ++// {0x0104, 0, 16, 0x00}, /* XRX200_BM_RAM_VAL_2 RAM Value Register 2 */ ++// {0x0104, 0, 16, 0x00}, /* XRX200_BM_RAM_VAL_2_VAL2 Data value [15:0] */ ++// {0x0108, 0, 16, 0x00}, /* XRX200_BM_RAM_VAL_1 RAM Value Register 1 */ ++// {0x0108, 0, 16, 0x00}, /* XRX200_BM_RAM_VAL_1_VAL1 Data value [15:0] */ ++// {0x010C, 0, 16, 0x00}, /* XRX200_BM_RAM_VAL_0 RAM Value Register 0 */ ++// {0x010C, 0, 16, 0x00}, /* XRX200_BM_RAM_VAL_0_VAL0 Data value [15:0] */ ++// {0x0110, 0, 16, 0x00}, /* XRX200_BM_RAM_ADDR RAM Address Register */ ++// {0x0110, 0, 11, 0x00}, /* XRX200_BM_RAM_ADDR_ADDR RAM Address */ ++// {0x0114, 0, 16, 0x00}, /* XRX200_BM_RAM_CTRL RAM Access Control Register */ ++// {0x0114, 15, 1, 0x00}, /* XRX200_BM_RAM_CTRL_BAS Access Busy/Access Start */ ++// {0x0114, 5, 1, 0x00}, /* XRX200_BM_RAM_CTRL_OPMOD Lookup Table Access Operation Mode */ ++// {0x0114, 0, 5, 0x00}, /* XRX200_BM_RAM_CTRL_ADDR Address for RAM selection */ ++// {0x0118, 0, 16, 0x00}, /* XRX200_BM_FSQM_GCTRL Free Segment Queue ManagerGlobal Control Register */ ++// {0x0118, 0, 10, 0x00}, /* XRX200_BM_FSQM_GCTRL_SEGNUM Maximum Segment Number */ ++// {0x011C, 0, 16, 0x00}, /* XRX200_BM_CONS_SEG Number of Consumed SegmentsRegister */ ++// {0x011C, 0, 10, 0x00}, /* XRX200_BM_CONS_SEG_FSEG Number of Consumed Segments */ ++// {0x0120, 0, 16, 0x00}, /* XRX200_BM_CONS_PKT Number of Consumed PacketPointers Register */ ++// {0x0120, 0, 11, 0x00}, /* XRX200_BM_CONS_PKT_FQP Number of Consumed Packet Pointers */ ++// {0x0124, 0, 16, 0x00}, /* XRX200_BM_GCTRL_F Buffer Manager Global ControlRegister 0 */ ++// {0x0124, 13, 1, 0x00}, /* XRX200_BM_GCTRL_BM_STA Buffer Manager Initialization Status Bit */ ++// {0x0124, 12, 1, 0x00}, /* XRX200_BM_GCTRL_SAT RMON Counter Update Mode */ ++// {0x0124, 11, 1, 0x00}, /* XRX200_BM_GCTRL_FR_RBC Freeze RMON RX Bad Byte 64 Bit Counter */ ++// {0x0124, 10, 1, 0x00}, /* XRX200_BM_GCTRL_FR_RGC Freeze RMON RX Good Byte 64 Bit Counter */ ++// {0x0124, 9, 1, 0x00}, /* XRX200_BM_GCTRL_FR_TGC Freeze RMON TX Good Byte 64 Bit Counter */ ++// {0x0124, 8, 1, 0x00}, /* XRX200_BM_GCTRL_I_FIN RAM initialization finished */ ++// {0x0124, 7, 1, 0x00}, /* XRX200_BM_GCTRL_CX_INI PQM Context RAM initialization */ ++// {0x0124, 6, 1, 0x00}, /* XRX200_BM_GCTRL_FP_INI FPQM RAM initialization */ ++// {0x0124, 5, 1, 0x00}, /* XRX200_BM_GCTRL_FS_INI FSQM RAM initialization */ ++// {0x0124, 4, 1, 0x00}, /* XRX200_BM_GCTRL_R_SRES Software Reset for RMON */ ++// {0x0124, 3, 1, 0x00}, /* XRX200_BM_GCTRL_S_SRES Software Reset for Scheduler */ ++// {0x0124, 2, 1, 0x00}, /* XRX200_BM_GCTRL_A_SRES Software Reset for AVG */ ++// {0x0124, 1, 1, 0x00}, /* XRX200_BM_GCTRL_P_SRES Software Reset for PQM */ ++// {0x0124, 0, 1, 0x00}, /* XRX200_BM_GCTRL_F_SRES Software Reset for FSQM */ ++// {0x0128, 0, 16, 0x00}, /* XRX200_BM_QUEUE_GCTRL Queue Manager GlobalControl Register 0 */ ++// {0x0128, 10, 1, 0x00}, /* XRX200_BM_QUEUE_GCTRL_GL_MOD WRED Mode Signal */ ++// {0x0128, 7, 3, 0x00}, /* XRX200_BM_QUEUE_GCTRL_AQUI Average Queue Update Interval */ ++// {0x0128, 3, 4, 0x00}, /* XRX200_BM_QUEUE_GCTRL_AQWF Average Queue Weight Factor */ ++// {0x0128, 2, 1, 0x00}, /* XRX200_BM_QUEUE_GCTRL_QAVGEN Queue Average Calculation Enable */ ++// {0x0128, 0, 2, 0x00}, /* XRX200_BM_QUEUE_GCTRL_DPROB Drop Probability Profile */ ++// {0x012C, 0, 16, 0x00}, /* XRX200_BM_WRED_RTH_0 WRED Red Threshold Register0 */ ++// {0x012C, 0, 10, 0x00}, /* XRX200_BM_WRED_RTH_0_MINTH Minimum Threshold */ ++// {0x0130, 0, 16, 0x00}, /* XRX200_BM_WRED_RTH_1 WRED Red Threshold Register1 */ ++// {0x0130, 0, 10, 0x00}, /* XRX200_BM_WRED_RTH_1_MAXTH Maximum Threshold */ ++// {0x0134, 0, 16, 0x00}, /* XRX200_BM_WRED_YTH_0 WRED Yellow ThresholdRegister 0 */ ++// {0x0134, 0, 10, 0x00}, /* XRX200_BM_WRED_YTH_0_MINTH Minimum Threshold */ ++// {0x0138, 0, 16, 0x00}, /* XRX200_BM_WRED_YTH_1 WRED Yellow ThresholdRegister 1 */ ++// {0x0138, 0, 10, 0x00}, /* XRX200_BM_WRED_YTH_1_MAXTH Maximum Threshold */ ++// {0x013C, 0, 16, 0x00}, /* XRX200_BM_WRED_GTH_0 WRED Green ThresholdRegister 0 */ ++// {0x013C, 0, 10, 0x00}, /* XRX200_BM_WRED_GTH_0_MINTH Minimum Threshold */ ++// {0x0140, 0, 16, 0x00}, /* XRX200_BM_WRED_GTH_1 WRED Green ThresholdRegister 1 */ ++// {0x0140, 0, 10, 0x00}, /* XRX200_BM_WRED_GTH_1_MAXTH Maximum Threshold */ ++// {0x0144, 0, 16, 0x00}, /* XRX200_BM_DROP_GTH_0_THR Drop Threshold ConfigurationRegister 0 */ ++// {0x0144, 0, 11, 0x00}, /* XRX200_BM_DROP_GTH_0_THR_FQ Threshold for frames marked red */ ++// {0x0148, 0, 16, 0x00}, /* XRX200_BM_DROP_GTH_1_THY Drop Threshold ConfigurationRegister 1 */ ++// {0x0148, 0, 11, 0x00}, /* XRX200_BM_DROP_GTH_1_THY_FQ Threshold for frames marked yellow */ ++// {0x014C, 0, 16, 0x00}, /* XRX200_BM_DROP_GTH_2_THG Drop Threshold ConfigurationRegister 2 */ ++// {0x014C, 0, 11, 0x00}, /* XRX200_BM_DROP_GTH_2_THG_FQ Threshold for frames marked green */ ++// {0x0150, 0, 16, 0x00}, /* XRX200_BM_IER Buffer Manager Global InterruptEnable Register */ ++// {0x0150, 7, 1, 0x00}, /* XRX200_BM_IER_CNT4 Counter Group 4 (RMON-CLASSIFICATION) Interrupt Enable */ ++// {0x0150, 6, 1, 0x00}, /* XRX200_BM_IER_CNT3 Counter Group 3 (RMON-PQM) Interrupt Enable */ ++// {0x0150, 5, 1, 0x00}, /* XRX200_BM_IER_CNT2 Counter Group 2 (RMON-SCHEDULER) Interrupt Enable */ ++// {0x0150, 4, 1, 0x00}, /* XRX200_BM_IER_CNT1 Counter Group 1 (RMON-QFETCH) Interrupt Enable */ ++// {0x0150, 3, 1, 0x00}, /* XRX200_BM_IER_CNT0 Counter Group 0 (RMON-QSTOR) Interrupt Enable */ ++// {0x0150, 2, 1, 0x00}, /* XRX200_BM_IER_DEQ PQM dequeue Interrupt Enable */ ++// {0x0150, 1, 1, 0x00}, /* XRX200_BM_IER_ENQ PQM Enqueue Interrupt Enable */ ++// {0x0150, 0, 1, 0x00}, /* XRX200_BM_IER_FSQM Buffer Empty Interrupt Enable */ ++// {0x0154, 0, 16, 0x00}, /* XRX200_BM_ISR Buffer Manager Global InterruptStatus Register */ ++// {0x0154, 7, 1, 0x00}, /* XRX200_BM_ISR_CNT4 Counter Group 4 Interrupt */ ++// {0x0154, 6, 1, 0x00}, /* XRX200_BM_ISR_CNT3 Counter Group 3 Interrupt */ ++// {0x0154, 5, 1, 0x00}, /* XRX200_BM_ISR_CNT2 Counter Group 2 Interrupt */ ++// {0x0154, 4, 1, 0x00}, /* XRX200_BM_ISR_CNT1 Counter Group 1 Interrupt */ ++// {0x0154, 3, 1, 0x00}, /* XRX200_BM_ISR_CNT0 Counter Group 0 Interrupt */ ++// {0x0154, 2, 1, 0x00}, /* XRX200_BM_ISR_DEQ PQM dequeue Interrupt Enable */ ++// {0x0154, 1, 1, 0x00}, /* XRX200_BM_ISR_ENQ PQM Enqueue Interrupt */ ++// {0x0154, 0, 1, 0x00}, /* XRX200_BM_ISR_FSQM Buffer Empty Interrupt */ ++// {0x0158, 0, 16, 0x00}, /* XRX200_BM_CISEL Buffer Manager RMON CounterInterrupt Select Register */ ++// {0x0158, 0, 3, 0x00}, /* XRX200_BM_CISEL_PORT Port Number */ ++// {0x015C, 0, 16, 0x00}, /* XRX200_BM_DEBUG_CTRL_DBG Debug Control Register */ ++// {0x015C, 0, 8, 0x00}, /* XRX200_BM_DEBUG_CTRL_DBG_SEL Select Signal for Debug Multiplexer */ ++// {0x0160, 0, 16, 0x00}, /* XRX200_BM_DEBUG_VAL_DBG Debug Value Register */ ++// {0x0160, 0, 16, 0x00}, /* XRX200_BM_DEBUG_VAL_DBG_DAT Debug Data Value */ ++// {0x0200, 0, 16, 0x08}, /* XRX200_BM_PCFG Buffer Manager PortConfiguration Register */ ++// {0x0200, 0, 1, 0x08}, /* XRX200_BM_PCFG_CNTEN RMON Counter Enable */ ++// {0x0204, 0, 16, 0x08}, /* XRX200_BM_RMON_CTRL_RAM1 Buffer ManagerRMON Control Register */ ++// {0x0204, 1, 1, 0x08}, /* XRX200_BM_RMON_CTRL_RAM2_RES Software Reset for RMON RAM2 */ ++// {0x0204, 0, 1, 0x08}, /* XRX200_BM_RMON_CTRL_RAM1_RES Software Reset for RMON RAM1 */ ++// {0x0400, 0, 16, 0x08}, /* XRX200_PQM_DP Packet Queue ManagerDrop Probability Register */ ++// {0x0400, 0, 2, 0x08}, /* XRX200_PQM_DP_DPROB Drop Probability Profile */ ++// {0x0404, 0, 16, 0x08}, /* XRX200_PQM_RS Packet Queue ManagerRate Shaper Assignment Register */ ++// {0x0404, 15, 1, 0x08}, /* XRX200_PQM_RS_EN2 Rate Shaper 2 Enable */ ++// {0x0404, 8, 6, 0x08}, /* XRX200_PQM_RS_RS2 Rate Shaper 2 */ ++// {0x0404, 7, 1, 0x08}, /* XRX200_PQM_RS_EN1 Rate Shaper 1 Enable */ ++// {0x0404, 0, 6, 0x08}, /* XRX200_PQM_RS_RS1 Rate Shaper 1 */ ++// {0x0500, 0, 16, 0x14}, /* XRX200_RS_CTRL Rate Shaper ControlRegister */ ++// {0x0500, 0, 1, 0x14}, /* XRX200_RS_CTRL_RSEN Rate Shaper Enable */ ++// {0x0504, 0, 16, 0x14}, /* XRX200_RS_CBS Rate Shaper CommittedBurst Size Register */ ++// {0x0504, 0, 10, 0x14}, /* XRX200_RS_CBS_CBS Committed Burst Size */ ++// {0x0508, 0, 16, 0x14}, /* XRX200_RS_IBS Rate Shaper InstantaneousBurst Size Register */ ++// {0x0508, 0, 2, 0x14}, /* XRX200_RS_IBS_IBS Instantaneous Burst Size */ ++// {0x050C, 0, 16, 0x14}, /* XRX200_RS_CIR_EXP Rate Shaper RateExponent Register */ ++// {0x050C, 0, 4, 0x14}, /* XRX200_RS_CIR_EXP_EXP Exponent */ ++// {0x0510, 0, 16, 0x14}, /* XRX200_RS_CIR_MANT Rate Shaper RateMantissa Register */ ++// {0x0510, 0, 10, 0x14}, /* XRX200_RS_CIR_MANT_MANT Mantissa */ ++ {0x1100, 0, 16, 0x00}, /* XRX200_PCE_TBL_KEY_7 Table Key Data 7 */ ++// {0x1100, 0, 16, 0x00}, /* XRX200_PCE_TBL_KEY_7_KEY7 Key Value[15:0] */ ++ {0x1104, 0, 16, 0x00}, /* XRX200_PCE_TBL_KEY_6 Table Key Data 6 */ ++// {0x1104, 0, 16, 0x00}, /* XRX200_PCE_TBL_KEY_6_KEY6 Key Value[15:0] */ ++ {0x1108, 0, 16, 0x00}, /* XRX200_PCE_TBL_KEY_5 Table Key Data 5 */ ++// {0x1108, 0, 16, 0x00}, /* XRX200_PCE_TBL_KEY_5_KEY5 Key Value[15:0] */ ++ {0x110C, 0, 16, 0x00}, /* XRX200_PCE_TBL_KEY_4 Table Key Data 4 */ ++// {0x110C, 0, 16, 0x00}, /* XRX200_PCE_TBL_KEY_4_KEY4 Key Value[15:0] */ ++ {0x1110, 0, 16, 0x00}, /* XRX200_PCE_TBL_KEY_3 Table Key Data 3 */ ++// {0x1110, 0, 16, 0x00}, /* XRX200_PCE_TBL_KEY_3_KEY3 Key Value[15:0] */ ++ {0x1114, 0, 16, 0x00}, /* XRX200_PCE_TBL_KEY_2 Table Key Data 2 */ ++// {0x1114, 0, 16, 0x00}, /* XRX200_PCE_TBL_KEY_2_KEY2 Key Value[15:0] */ ++ {0x1118, 0, 16, 0x00}, /* XRX200_PCE_TBL_KEY_1 Table Key Data 1 */ ++// {0x1118, 0, 16, 0x00}, /* XRX200_PCE_TBL_KEY_1_KEY1 Key Value[31:16] */ ++ {0x111C, 0, 16, 0x00}, /* XRX200_PCE_TBL_KEY_0 Table Key Data 0 */ ++// {0x111C, 0, 16, 0x00}, /* XRX200_PCE_TBL_KEY_0_KEY0 Key Value[15:0] */ ++ {0x1120, 0, 16, 0x00}, /* XRX200_PCE_TBL_MASK_0 Table Mask Write Register0 */ ++// {0x1120, 0, 16, 0x00}, /* XRX200_PCE_TBL_MASK_0_MASK0 Mask Pattern [15:0] */ ++ {0x1124, 0, 16, 0x00}, /* XRX200_PCE_TBL_VAL_4 Table Value Register4 */ ++// {0x1124, 0, 16, 0x00}, /* XRX200_PCE_TBL_VAL_4_VAL4 Data value [15:0] */ ++ {0x1128, 0, 16, 0x00}, /* XRX200_PCE_TBL_VAL_3 Table Value Register3 */ ++// {0x1128, 0, 16, 0x00}, /* XRX200_PCE_TBL_VAL_3_VAL3 Data value [15:0] */ ++ {0x112C, 0, 16, 0x00}, /* XRX200_PCE_TBL_VAL_2 Table Value Register2 */ ++// {0x112C, 0, 16, 0x00}, /* XRX200_PCE_TBL_VAL_2_VAL2 Data value [15:0] */ ++ {0x1130, 0, 16, 0x00}, /* XRX200_PCE_TBL_VAL_1 Table Value Register1 */ ++// {0x1130, 0, 16, 0x00}, /* XRX200_PCE_TBL_VAL_1_VAL1 Data value [15:0] */ ++ {0x1134, 0, 16, 0x00}, /* XRX200_PCE_TBL_VAL_0 Table Value Register0 */ ++// {0x1134, 0, 16, 0x00}, /* XRX200_PCE_TBL_VAL_0_VAL0 Data value [15:0] */ ++// {0x1138, 0, 16, 0x00}, /* XRX200_PCE_TBL_ADDR Table Entry AddressRegister */ ++ {0x1138, 0, 11, 0x00}, /* XRX200_PCE_TBL_ADDR_ADDR Table Address */ ++// {0x113C, 0, 16, 0x00}, /* XRX200_PCE_TBL_CTRL Table Access ControlRegister */ ++ {0x113C, 15, 1, 0x00}, /* XRX200_PCE_TBL_CTRL_BAS Access Busy/Access Start */ ++ {0x113C, 13, 1, 0x00}, /* XRX200_PCE_TBL_CTRL_TYPE Lookup Entry Type */ ++ {0x113C, 12, 1, 0x00}, /* XRX200_PCE_TBL_CTRL_VLD Lookup Entry Valid */ ++ {0x113C, 7, 4, 0x00}, /* XRX200_PCE_TBL_CTRL_GMAP Group Map */ ++ {0x113C, 5, 2, 0x00}, /* XRX200_PCE_TBL_CTRL_OPMOD Lookup Table Access Operation Mode */ ++ {0x113C, 0, 5, 0x00}, /* XRX200_PCE_TBL_CTRL_ADDR Lookup Table Address */ ++// {0x1140, 0, 16, 0x00}, /* XRX200_PCE_TBL_STAT Table General StatusRegister */ ++// {0x1140, 2, 1, 0x00}, /* XRX200_PCE_TBL_STAT_TBUSY Table Access Busy */ ++// {0x1140, 1, 1, 0x00}, /* XRX200_PCE_TBL_STAT_TEMPT Table Empty */ ++// {0x1140, 0, 1, 0x00}, /* XRX200_PCE_TBL_STAT_TFUL Table Full */ ++// {0x1144, 0, 16, 0x00}, /* XRX200_PCE_AGE_0 Aging Counter ConfigurationRegister 0 */ ++// {0x1144, 0, 4, 0x00}, /* XRX200_PCE_AGE_0_EXP Aging Counter Exponent Value */ ++// {0x1148, 0, 16, 0x00}, /* XRX200_PCE_AGE_1 Aging Counter ConfigurationRegister 1 */ ++// {0x1148, 0, 16, 0x00}, /* XRX200_PCE_AGE_1_MANT Aging Counter Mantissa Value */ ++// {0x114C, 0, 16, 0x00}, /* XRX200_PCE_PMAP_1 Port Map Register 1 */ ++// {0x114C, 0, 16, 0x00}, /* XRX200_PCE_PMAP_1_MPMAP Monitoring Port Map */ ++// {0x1150, 0, 16, 0x00}, /* XRX200_PCE_PMAP_2 Port Map Register 2 */ ++// {0x1150, 0, 16, 0x00}, /* XRX200_PCE_PMAP_2_DMCPMAP Default Multicast Port Map */ ++// {0x1154, 0, 16, 0x00}, /* XRX200_PCE_PMAP_3 Port Map Register 3 */ ++// {0x1154, 0, 16, 0x00}, /* XRX200_PCE_PMAP_3_UUCMAP Default Unknown Unicast Port Map */ ++// {0x1158, 0, 16, 0x00}, /* XRX200_PCE_GCTRL_0 PCE Global Control Register0 */ ++// {0x1158, 15, 1, 0x00}, /* XRX200_PCE_GCTRL_0_IGMP IGMP Mode Selection */ ++ {0x1158, 14, 1, 0x00}, /* XRX200_PCE_GCTRL_0_VLAN VLAN-aware Switching */ ++// {0x1158, 13, 1, 0x00}, /* XRX200_PCE_GCTRL_0_NOPM No Port Map Forwarding */ ++// {0x1158, 12, 1, 0x00}, /* XRX200_PCE_GCTRL_0_SCONUC Unknown Unicast Storm Control */ ++// {0x1158, 11, 1, 0x00}, /* XRX200_PCE_GCTRL_0_SCONMC Multicast Storm Control */ ++// {0x1158, 10, 1, 0x00}, /* XRX200_PCE_GCTRL_0_SCONBC Broadcast Storm Control */ ++// {0x1158, 8, 2, 0x00}, /* XRX200_PCE_GCTRL_0_SCONMOD Storm Control Mode */ ++// {0x1158, 4, 4, 0x00}, /* XRX200_PCE_GCTRL_0_SCONMET Storm Control Metering Instance */ ++// {0x1158, 3, 1, 0x00}, /* XRX200_PCE_GCTRL_0_MC_VALID Access Request */ ++// {0x1158, 2, 1, 0x00}, /* XRX200_PCE_GCTRL_0_PLCKMOD Port Lock Mode */ ++// {0x1158, 1, 1, 0x00}, /* XRX200_PCE_GCTRL_0_PLIMMOD MAC Address Learning Limitation Mode */ ++// {0x1158, 0, 1, 0x00}, /* XRX200_PCE_GCTRL_0_MTFL MAC Table Flushing */ ++// {0x115C, 0, 16, 0x00}, /* XRX200_PCE_GCTRL_1 PCE Global Control Register1 */ ++// {0x115C, 1, 1, 0x00}, /* XRX200_PCE_GCTRL_1_PCE_DIS PCE Disable after currently processed packet */ ++// {0x115C, 0, 1, 0x00}, /* XRX200_PCE_GCTRL_1_LRNMOD MAC Address Learning Mode */ ++// {0x1160, 0, 16, 0x00}, /* XRX200_PCE_TCM_GLOB_CTRL Three-color MarkerGlobal Control Register */ ++// {0x1160, 6, 3, 0x00}, /* XRX200_PCE_TCM_GLOB_CTRL_DPRED Re-marking Drop Precedence Red Encoding */ ++// {0x1160, 3, 3, 0x00}, /* XRX200_PCE_TCM_GLOB_CTRL_DPYEL Re-marking Drop Precedence Yellow Encoding */ ++// {0x1160, 0, 3, 0x00}, /* XRX200_PCE_TCM_GLOB_CTRL_DPGRN Re-marking Drop Precedence Green Encoding */ ++// {0x1164, 0, 16, 0x00}, /* XRX200_PCE_IGMP_CTRL IGMP Control Register */ ++// {0x1164, 15, 1, 0x00}, /* XRX200_PCE_IGMP_CTRL_FAGEEN Force Aging of Table Entries Enable */ ++// {0x1164, 14, 1, 0x00}, /* XRX200_PCE_IGMP_CTRL_FLEAVE Fast Leave Enable */ ++// {0x1164, 13, 1, 0x00}, /* XRX200_PCE_IGMP_CTRL_DMRTEN Default Maximum Response Time Enable */ ++// {0x1164, 12, 1, 0x00}, /* XRX200_PCE_IGMP_CTRL_JASUP Join Aggregation Suppression Enable */ ++// {0x1164, 11, 1, 0x00}, /* XRX200_PCE_IGMP_CTRL_REPSUP Report Suppression Enable */ ++// {0x1164, 10, 1, 0x00}, /* XRX200_PCE_IGMP_CTRL_SRPEN Snooping of Router Port Enable */ ++// {0x1164, 8, 2, 0x00}, /* XRX200_PCE_IGMP_CTRL_ROB Robustness Variable */ ++// {0x1164, 0, 8, 0x00}, /* XRX200_PCE_IGMP_CTRL_DMRT IGMP Default Maximum Response Time */ ++// {0x1168, 0, 16, 0x00}, /* XRX200_PCE_IGMP_DRPM IGMP Default RouterPort Map Register */ ++// {0x1168, 0, 16, 0x00}, /* XRX200_PCE_IGMP_DRPM_DRPM IGMP Default Router Port Map */ ++// {0x116C, 0, 16, 0x00}, /* XRX200_PCE_IGMP_AGE_0 IGMP Aging Register0 */ ++// {0x116C, 3, 8, 0x00}, /* XRX200_PCE_IGMP_AGE_0_MANT IGMP Group Aging Time Mantissa */ ++// {0x116C, 0, 3, 0x00}, /* XRX200_PCE_IGMP_AGE_0_EXP IGMP Group Aging Time Exponent */ ++// {0x1170, 0, 16, 0x00}, /* XRX200_PCE_IGMP_AGE_1 IGMP Aging Register1 */ ++// {0x1170, 0, 12, 0x00}, /* XRX200_PCE_IGMP_AGE_1_MANT IGMP Router Port Aging Time Mantissa */ ++// {0x1174, 0, 16, 0x00}, /* XRX200_PCE_IGMP_STAT IGMP Status Register */ ++// {0x1174, 0, 16, 0x00}, /* XRX200_PCE_IGMP_STAT_IGPM IGMP Port Map */ ++// {0x1178, 0, 16, 0x00}, /* XRX200_WOL_GLB_CTRL Wake-on-LAN ControlRegister */ ++// {0x1178, 0, 1, 0x00}, /* XRX200_WOL_GLB_CTRL_PASSEN WoL Password Enable */ ++// {0x117C, 0, 16, 0x00}, /* XRX200_WOL_DA_0 Wake-on-LAN DestinationAddress Register 0 */ ++// {0x117C, 0, 16, 0x00}, /* XRX200_WOL_DA_0_DA0 WoL Destination Address [15:0] */ ++// {0x1180, 0, 16, 0x00}, /* XRX200_WOL_DA_1 Wake-on-LAN DestinationAddress Register 1 */ ++// {0x1180, 0, 16, 0x00}, /* XRX200_WOL_DA_1_DA1 WoL Destination Address [31:16] */ ++// {0x1184, 0, 16, 0x00}, /* XRX200_WOL_DA_2 Wake-on-LAN DestinationAddress Register 2 */ ++// {0x1184, 0, 16, 0x00}, /* XRX200_WOL_DA_2_DA2 WoL Destination Address [47:32] */ ++// {0x1188, 0, 16, 0x00}, /* XRX200_WOL_PW_0 Wake-on-LAN Password Register0 */ ++// {0x1188, 0, 16, 0x00}, /* XRX200_WOL_PW_0_PW0 WoL Password [15:0] */ ++// {0x118C, 0, 16, 0x00}, /* XRX200_WOL_PW_1 Wake-on-LAN Password Register1 */ ++// {0x118C, 0, 16, 0x00}, /* XRX200_WOL_PW_1_PW1 WoL Password [31:16] */ ++// {0x1190, 0, 16, 0x00}, /* XRX200_WOL_PW_2 Wake-on-LAN Password Register2 */ ++// {0x1190, 0, 16, 0x00}, /* XRX200_WOL_PW_2_PW2 WoL Password [47:32] */ ++// {0x1194, 0, 16, 0x00}, /* XRX200_PCE_IER_0_PINT Parser and ClassificationEngine Global Interrupt Enable Register 0 */ ++// {0x1194, 15, 1, 0x00}, /* XRX200_PCE_IER_0_PINT_15 Port Interrupt Enable */ ++// {0x1194, 14, 1, 0x00}, /* XRX200_PCE_IER_0_PINT_14 Port Interrupt Enable */ ++// {0x1194, 13, 1, 0x00}, /* XRX200_PCE_IER_0_PINT_13 Port Interrupt Enable */ ++// {0x1194, 12, 1, 0x00}, /* XRX200_PCE_IER_0_PINT_12 Port Interrupt Enable */ ++// {0x1194, 11, 1, 0x00}, /* XRX200_PCE_IER_0_PINT_11 Port Interrupt Enable */ ++// {0x1194, 10, 1, 0x00}, /* XRX200_PCE_IER_0_PINT_10 Port Interrupt Enable */ ++// {0x1194, 9, 1, 0x00}, /* XRX200_PCE_IER_0_PINT_9 Port Interrupt Enable */ ++// {0x1194, 8, 1, 0x00}, /* XRX200_PCE_IER_0_PINT_8 Port Interrupt Enable */ ++// {0x1194, 7, 1, 0x00}, /* XRX200_PCE_IER_0_PINT_7 Port Interrupt Enable */ ++// {0x1194, 6, 1, 0x00}, /* XRX200_PCE_IER_0_PINT_6 Port Interrupt Enable */ ++// {0x1194, 5, 1, 0x00}, /* XRX200_PCE_IER_0_PINT_5 Port Interrupt Enable */ ++// {0x1194, 4, 1, 0x00}, /* XRX200_PCE_IER_0_PINT_4 Port Interrupt Enable */ ++// {0x1194, 3, 1, 0x00}, /* XRX200_PCE_IER_0_PINT_3 Port Interrupt Enable */ ++// {0x1194, 2, 1, 0x00}, /* XRX200_PCE_IER_0_PINT_2 Port Interrupt Enable */ ++// {0x1194, 1, 1, 0x00}, /* XRX200_PCE_IER_0_PINT_1 Port Interrupt Enable */ ++// {0x1194, 0, 1, 0x00}, /* XRX200_PCE_IER_0_PINT_0 Port Interrupt Enable */ ++// {0x1198, 0, 16, 0x00}, /* XRX200_PCE_IER_1 Parser and ClassificationEngine Global Interrupt Enable Register 1 */ ++// {0x1198, 6, 1, 0x00}, /* XRX200_PCE_IER_1_FLOWINT Traffic Flow Table Interrupt Rule matched Interrupt Enable */ ++// {0x1198, 5, 1, 0x00}, /* XRX200_PCE_IER_1_CPH2 Classification Phase 2 Ready Interrupt Enable */ ++// {0x1198, 4, 1, 0x00}, /* XRX200_PCE_IER_1_CPH1 Classification Phase 1 Ready Interrupt Enable */ ++// {0x1198, 3, 1, 0x00}, /* XRX200_PCE_IER_1_CPH0 Classification Phase 0 Ready Interrupt Enable */ ++// {0x1198, 2, 1, 0x00}, /* XRX200_PCE_IER_1_PRDY Parser Ready Interrupt Enable */ ++// {0x1198, 1, 1, 0x00}, /* XRX200_PCE_IER_1_IGTF IGMP Table Full Interrupt Enable */ ++// {0x1198, 0, 1, 0x00}, /* XRX200_PCE_IER_1_MTF MAC Table Full Interrupt Enable */ ++// {0x119C, 0, 16, 0x00}, /* XRX200_PCE_ISR_0_PINT Parser and ClassificationEngine Global Interrupt Status Register 0 */ ++// {0x119C, 15, 1, 0x00}, /* XRX200_PCE_ISR_0_PINT_15 Port Interrupt */ ++// {0x119C, 14, 1, 0x00}, /* XRX200_PCE_ISR_0_PINT_14 Port Interrupt */ ++// {0x119C, 13, 1, 0x00}, /* XRX200_PCE_ISR_0_PINT_13 Port Interrupt */ ++// {0x119C, 12, 1, 0x00}, /* XRX200_PCE_ISR_0_PINT_12 Port Interrupt */ ++// {0x119C, 11, 1, 0x00}, /* XRX200_PCE_ISR_0_PINT_11 Port Interrupt */ ++// {0x119C, 10, 1, 0x00}, /* XRX200_PCE_ISR_0_PINT_10 Port Interrupt */ ++// {0x119C, 9, 1, 0x00}, /* XRX200_PCE_ISR_0_PINT_9 Port Interrupt */ ++// {0x119C, 8, 1, 0x00}, /* XRX200_PCE_ISR_0_PINT_8 Port Interrupt */ ++// {0x119C, 7, 1, 0x00}, /* XRX200_PCE_ISR_0_PINT_7 Port Interrupt */ ++// {0x119C, 6, 1, 0x00}, /* XRX200_PCE_ISR_0_PINT_6 Port Interrupt */ ++// {0x119C, 5, 1, 0x00}, /* XRX200_PCE_ISR_0_PINT_5 Port Interrupt */ ++// {0x119C, 4, 1, 0x00}, /* XRX200_PCE_ISR_0_PINT_4 Port Interrupt */ ++// {0x119C, 3, 1, 0x00}, /* XRX200_PCE_ISR_0_PINT_3 Port Interrupt */ ++// {0x119C, 2, 1, 0x00}, /* XRX200_PCE_ISR_0_PINT_2 Port Interrupt */ ++// {0x119C, 1, 1, 0x00}, /* XRX200_PCE_ISR_0_PINT_1 Port Interrupt */ ++// {0x119C, 0, 1, 0x00}, /* XRX200_PCE_ISR_0_PINT_0 Port Interrupt */ ++// {0x11A0, 0, 16, 0x00}, /* XRX200_PCE_ISR_1 Parser and ClassificationEngine Global Interrupt Status Register 1 */ ++// {0x11A0, 6, 1, 0x00}, /* XRX200_PCE_ISR_1_FLOWINT Traffic Flow Table Interrupt Rule matched */ ++// {0x11A0, 5, 1, 0x00}, /* XRX200_PCE_ISR_1_CPH2 Classification Phase 2 Ready Interrupt */ ++// {0x11A0, 4, 1, 0x00}, /* XRX200_PCE_ISR_1_CPH1 Classification Phase 1 Ready Interrupt */ ++// {0x11A0, 3, 1, 0x00}, /* XRX200_PCE_ISR_1_CPH0 Classification Phase 0 Ready Interrupt */ ++// {0x11A0, 2, 1, 0x00}, /* XRX200_PCE_ISR_1_PRDY Parser Ready Interrupt */ ++// {0x11A0, 1, 1, 0x00}, /* XRX200_PCE_ISR_1_IGTF IGMP Table Full Interrupt */ ++// {0x11A0, 0, 1, 0x00}, /* XRX200_PCE_ISR_1_MTF MAC Table Full Interrupt */ ++// {0x11A4, 0, 16, 0x00}, /* XRX200_PARSER_STAT_FIFO Parser Status Register */ ++// {0x11A4, 8, 8, 0x00}, /* XRX200_PARSER_STAT_FSM_DAT_CNT Parser FSM Data Counter */ ++// {0x11A4, 5, 3, 0x00}, /* XRX200_PARSER_STAT_FSM_STATE Parser FSM State */ ++// {0x11A4, 4, 1, 0x00}, /* XRX200_PARSER_STAT_PKT_ERR Packet error detected */ ++// {0x11A4, 3, 1, 0x00}, /* XRX200_PARSER_STAT_FSM_FIN Parser FSM finished */ ++// {0x11A4, 2, 1, 0x00}, /* XRX200_PARSER_STAT_FSM_START Parser FSM start */ ++// {0x11A4, 1, 1, 0x00}, /* XRX200_PARSER_STAT_FIFO_RDY Parser FIFO ready for read. */ ++// {0x11A4, 0, 1, 0x00}, /* XRX200_PARSER_STAT_FIFO_FULL Parser */ ++// {0x1200, 0, 16, 0x28}, /* XRX200_PCE_PCTRL_0 PCE Port ControlRegister 0 */ ++// {0x1200, 13, 1, 0x28}, /* XRX200_PCE_PCTRL_0_MCST Multicast Forwarding Mode Selection */ ++// {0x1200, 12, 1, 0x28}, /* XRX200_PCE_PCTRL_0_EGSTEN Table-based Egress Special Tag Enable */ ++// {0x1200, 11, 1, 0x28}, /* XRX200_PCE_PCTRL_0_IGSTEN Ingress Special Tag Enable */ ++// {0x1200, 10, 1, 0x28}, /* XRX200_PCE_PCTRL_0_PCPEN PCP Remarking Mode */ ++// {0x1200, 9, 1, 0x28}, /* XRX200_PCE_PCTRL_0_CLPEN Class Remarking Mode */ ++// {0x1200, 8, 1, 0x28}, /* XRX200_PCE_PCTRL_0_DPEN Drop Precedence Remarking Mode */ ++// {0x1200, 7, 1, 0x28}, /* XRX200_PCE_PCTRL_0_CMOD Three-color Marker Color Mode */ ++// {0x1200, 6, 1, 0x28}, /* XRX200_PCE_PCTRL_0_VREP VLAN Replacement Mode */ ++ {0x1200, 5, 1, 0x28}, /* XRX200_PCE_PCTRL_0_TVM Transparent VLAN Mode */ ++// {0x1200, 4, 1, 0x28}, /* XRX200_PCE_PCTRL_0_PLOCK Port Locking Enable */ ++// {0x1200, 3, 1, 0x28}, /* XRX200_PCE_PCTRL_0_AGEDIS Aging Disable */ ++// {0x1200, 0, 3, 0x28}, /* XRX200_PCE_PCTRL_0_PSTATE Port State */ ++// {0x1204, 0, 16, 0x28}, /* XRX200_PCE_PCTRL_1 PCE Port ControlRegister 1 */ ++// {0x1204, 0, 8, 0x28}, /* XRX200_PCE_PCTRL_1_LRNLIM MAC Address Learning Limit */ ++// {0x1208, 0, 16, 0x28}, /* XRX200_PCE_PCTRL_2 PCE Port ControlRegister 2 */ ++// {0x1208, 7, 1, 0x28}, /* XRX200_PCE_PCTRL_2_DSCPMOD DSCP Mode Selection */ ++// {0x1208, 5, 2, 0x28}, /* XRX200_PCE_PCTRL_2_DSCP Enable DSCP to select the Class of Service */ ++// {0x1208, 4, 1, 0x28}, /* XRX200_PCE_PCTRL_2_PCP Enable VLAN PCP to select the Class of Service */ ++// {0x1208, 0, 4, 0x28}, /* XRX200_PCE_PCTRL_2_PCLASS Port-based Traffic Class */ ++// {0x120C, 0, 16, 0x28}, /* XRX200_PCE_PCTRL_3_VIO PCE Port ControlRegister 3 */ ++// {0x120C, 11, 1, 0x28}, /* XRX200_PCE_PCTRL_3_EDIR Egress Redirection Mode */ ++// {0x120C, 10, 1, 0x28}, /* XRX200_PCE_PCTRL_3_RXDMIR Receive Mirroring Enable for dropped frames */ ++// {0x120C, 9, 1, 0x28}, /* XRX200_PCE_PCTRL_3_RXVMIR Receive Mirroring Enable for valid frames */ ++// {0x120C, 8, 1, 0x28}, /* XRX200_PCE_PCTRL_3_TXMIR Transmit Mirroring Enable */ ++// {0x120C, 7, 1, 0x28}, /* XRX200_PCE_PCTRL_3_VIO_7 Violation Type 7 Mirroring Enable */ ++// {0x120C, 6, 1, 0x28}, /* XRX200_PCE_PCTRL_3_VIO_6 Violation Type 6 Mirroring Enable */ ++// {0x120C, 5, 1, 0x28}, /* XRX200_PCE_PCTRL_3_VIO_5 Violation Type 5 Mirroring Enable */ ++// {0x120C, 4, 1, 0x28}, /* XRX200_PCE_PCTRL_3_VIO_4 Violation Type 4 Mirroring Enable */ ++// {0x120C, 3, 1, 0x28}, /* XRX200_PCE_PCTRL_3_VIO_3 Violation Type 3 Mirroring Enable */ ++// {0x120C, 2, 1, 0x28}, /* XRX200_PCE_PCTRL_3_VIO_2 Violation Type 2 Mirroring Enable */ ++// {0x120C, 1, 1, 0x28}, /* XRX200_PCE_PCTRL_3_VIO_1 Violation Type 1 Mirroring Enable */ ++// {0x120C, 0, 1, 0x28}, /* XRX200_PCE_PCTRL_3_VIO_0 Violation Type 0 Mirroring Enable */ ++// {0x1210, 0, 16, 0x28}, /* XRX200_WOL_CTRL Wake-on-LAN ControlRegister */ ++// {0x1210, 0, 1, 0x28}, /* XRX200_WOL_CTRL_PORT WoL Enable */ ++// {0x1214, 0, 16, 0x28}, /* XRX200_PCE_VCTRL PCE VLAN ControlRegister */ ++ {0x1214, 5, 1, 0x28}, /* XRX200_PCE_VCTRL_VSR VLAN Security Rule */ ++ {0x1214, 4, 1, 0x28}, /* XRX200_PCE_VCTRL_VEMR VLAN Egress Member Violation Rule */ ++ {0x1214, 3, 1, 0x28}, /* XRX200_PCE_VCTRL_VIMR VLAN Ingress Member Violation Rule */ ++ {0x1214, 1, 2, 0x28}, /* XRX200_PCE_VCTRL_VINR VLAN Ingress Tag Rule */ ++ {0x1214, 0, 1, 0x28}, /* XRX200_PCE_VCTRL_UVR Unknown VLAN Rule */ ++// {0x1218, 0, 16, 0x28}, /* XRX200_PCE_DEFPVID PCE Default PortVID Register */ ++ {0x1218, 0, 6, 0x28}, /* XRX200_PCE_DEFPVID_PVID Default Port VID Index */ ++// {0x121C, 0, 16, 0x28}, /* XRX200_PCE_PSTAT PCE Port StatusRegister */ ++// {0x121C, 0, 16, 0x28}, /* XRX200_PCE_PSTAT_LRNCNT Learning Count */ ++// {0x1220, 0, 16, 0x28}, /* XRX200_PCE_PIER Parser and ClassificationEngine Port Interrupt Enable Register */ ++// {0x1220, 5, 1, 0x28}, /* XRX200_PCE_PIER_CLDRP Classification Drop Interrupt Enable */ ++// {0x1220, 4, 1, 0x28}, /* XRX200_PCE_PIER_PTDRP Port Drop Interrupt Enable */ ++// {0x1220, 3, 1, 0x28}, /* XRX200_PCE_PIER_VLAN VLAN Violation Interrupt Enable */ ++// {0x1220, 2, 1, 0x28}, /* XRX200_PCE_PIER_WOL Wake-on-LAN Interrupt Enable */ ++// {0x1220, 1, 1, 0x28}, /* XRX200_PCE_PIER_LOCK Port Limit Alert Interrupt Enable */ ++// {0x1220, 0, 1, 0x28}, /* XRX200_PCE_PIER_LIM Port Lock Alert Interrupt Enable */ ++// {0x1224, 0, 16, 0x28}, /* XRX200_PCE_PISR Parser and ClassificationEngine Port Interrupt Status Register */ ++// {0x1224, 5, 1, 0x28}, /* XRX200_PCE_PISR_CLDRP Classification Drop Interrupt */ ++// {0x1224, 4, 1, 0x28}, /* XRX200_PCE_PISR_PTDRP Port Drop Interrupt */ ++// {0x1224, 3, 1, 0x28}, /* XRX200_PCE_PISR_VLAN VLAN Violation Interrupt */ ++// {0x1224, 2, 1, 0x28}, /* XRX200_PCE_PISR_WOL Wake-on-LAN Interrupt */ ++// {0x1224, 1, 1, 0x28}, /* XRX200_PCE_PISR_LOCK Port Lock Alert Interrupt */ ++// {0x1224, 0, 1, 0x28}, /* XRX200_PCE_PISR_LIMIT Port Limitation Alert Interrupt */ ++// {0x1600, 0, 16, 0x1c}, /* XRX200_PCE_TCM_CTRL Three-colorMarker Control Register */ ++// {0x1600, 0, 1, 0x1c}, /* XRX200_PCE_TCM_CTRL_TCMEN Three-color Marker metering instance enable */ ++// {0x1604, 0, 16, 0x1c}, /* XRX200_PCE_TCM_STAT Three-colorMarker Status Register */ ++// {0x1604, 1, 1, 0x1c}, /* XRX200_PCE_TCM_STAT_AL1 Three-color Marker Alert 1 Status */ ++// {0x1604, 0, 1, 0x1c}, /* XRX200_PCE_TCM_STAT_AL0 Three-color Marker Alert 0 Status */ ++// {0x1608, 0, 16, 0x1c}, /* XRX200_PCE_TCM_CBS Three-color MarkerCommitted Burst Size Register */ ++// {0x1608, 0, 10, 0x1c}, /* XRX200_PCE_TCM_CBS_CBS Committed Burst Size */ ++// {0x160C, 0, 16, 0x1c}, /* XRX200_PCE_TCM_EBS Three-color MarkerExcess Burst Size Register */ ++// {0x160C, 0, 10, 0x1c}, /* XRX200_PCE_TCM_EBS_EBS Excess Burst Size */ ++// {0x1610, 0, 16, 0x1c}, /* XRX200_PCE_TCM_IBS Three-color MarkerInstantaneous Burst Size Register */ ++// {0x1610, 0, 2, 0x1c}, /* XRX200_PCE_TCM_IBS_IBS Instantaneous Burst Size */ ++// {0x1614, 0, 16, 0x1c}, /* XRX200_PCE_TCM_CIR_MANT Three-colorMarker Constant Information Rate Mantissa Register */ ++// {0x1614, 0, 10, 0x1c}, /* XRX200_PCE_TCM_CIR_MANT_MANT Rate Counter Mantissa */ ++// {0x1618, 0, 16, 0x1c}, /* XRX200_PCE_TCM_CIR_EXP Three-colorMarker Constant Information Rate Exponent Register */ ++// {0x1618, 0, 4, 0x1c}, /* XRX200_PCE_TCM_CIR_EXP_EXP Rate Counter Exponent */ ++// {0x2300, 0, 16, 0x00}, /* XRX200_MAC_TEST MAC Test Register */ ++// {0x2300, 0, 16, 0x00}, /* XRX200_MAC_TEST_JTP Jitter Test Pattern */ ++// {0x2304, 0, 16, 0x00}, /* XRX200_MAC_PFAD_CFG MAC Pause FrameSource Address Configuration Register */ ++// {0x2304, 0, 1, 0x00}, /* XRX200_MAC_PFAD_CFG_SAMOD Source Address Mode */ ++// {0x2308, 0, 16, 0x00}, /* XRX200_MAC_PFSA_0 Pause Frame SourceAddress Part 0 */ ++// {0x2308, 0, 16, 0x00}, /* XRX200_MAC_PFSA_0_PFAD Pause Frame Source Address Part 0 */ ++// {0x230C, 0, 16, 0x00}, /* XRX200_MAC_PFSA_1 Pause Frame SourceAddress Part 1 */ ++// {0x230C, 0, 16, 0x00}, /* XRX200_MAC_PFSA_1_PFAD Pause Frame Source Address Part 1 */ ++// {0x2310, 0, 16, 0x00}, /* XRX200_MAC_PFSA_2 Pause Frame SourceAddress Part 2 */ ++// {0x2310, 0, 16, 0x00}, /* XRX200_MAC_PFSA_2_PFAD Pause Frame Source Address Part 2 */ ++// {0x2314, 0, 16, 0x00}, /* XRX200_MAC_FLEN MAC Frame Length Register */ ++// {0x2314, 0, 14, 0x00}, /* XRX200_MAC_FLEN_LEN Maximum Frame Length */ ++// {0x2318, 0, 16, 0x00}, /* XRX200_MAC_VLAN_ETYPE_0 MAC VLAN EthertypeRegister 0 */ ++// {0x2318, 0, 16, 0x00}, /* XRX200_MAC_VLAN_ETYPE_0_OUTER Ethertype */ ++// {0x231C, 0, 16, 0x00}, /* XRX200_MAC_VLAN_ETYPE_1 MAC VLAN EthertypeRegister 1 */ ++// {0x231C, 0, 16, 0x00}, /* XRX200_MAC_VLAN_ETYPE_1_INNER Ethertype */ ++// {0x2320, 0, 16, 0x00}, /* XRX200_MAC_IER MAC Interrupt EnableRegister */ ++// {0x2320, 0, 8, 0x00}, /* XRX200_MAC_IER_MACIEN MAC Interrupt Enable */ ++// {0x2324, 0, 16, 0x00}, /* XRX200_MAC_ISR MAC Interrupt StatusRegister */ ++// {0x2324, 0, 8, 0x00}, /* XRX200_MAC_ISR_MACINT MAC Interrupt */ ++// {0x2400, 0, 16, 0x30}, /* XRX200_MAC_PSTAT MAC Port Status Register */ ++// {0x2400, 11, 1, 0x30}, /* XRX200_MAC_PSTAT_PACT PHY Active Status */ ++ {0x2400, 10, 1, 0x30}, /* XRX200_MAC_PSTAT_GBIT Gigabit Speed Status */ ++ {0x2400, 9, 1, 0x30}, /* XRX200_MAC_PSTAT_MBIT Megabit Speed Status */ ++ {0x2400, 8, 1, 0x30}, /* XRX200_MAC_PSTAT_FDUP Full Duplex Status */ ++// {0x2400, 7, 1, 0x30}, /* XRX200_MAC_PSTAT_RXPAU Receive Pause Status */ ++// {0x2400, 6, 1, 0x30}, /* XRX200_MAC_PSTAT_TXPAU Transmit Pause Status */ ++// {0x2400, 5, 1, 0x30}, /* XRX200_MAC_PSTAT_RXPAUEN Receive Pause Enable Status */ ++// {0x2400, 4, 1, 0x30}, /* XRX200_MAC_PSTAT_TXPAUEN Transmit Pause Enable Status */ ++ {0x2400, 3, 1, 0x30}, /* XRX200_MAC_PSTAT_LSTAT Link Status */ ++// {0x2400, 2, 1, 0x30}, /* XRX200_MAC_PSTAT_CRS Carrier Sense Status */ ++// {0x2400, 1, 1, 0x30}, /* XRX200_MAC_PSTAT_TXLPI Transmit Low-power Idle Status */ ++// {0x2400, 0, 1, 0x30}, /* XRX200_MAC_PSTAT_RXLPI Receive Low-power Idle Status */ ++// {0x2404, 0, 16, 0x30}, /* XRX200_MAC_PISR MAC Interrupt Status Register */ ++// {0x2404, 13, 1, 0x30}, /* XRX200_MAC_PISR_PACT PHY Active Status */ ++// {0x2404, 12, 1, 0x30}, /* XRX200_MAC_PISR_SPEED Megabit Speed Status */ ++// {0x2404, 11, 1, 0x30}, /* XRX200_MAC_PISR_FDUP Full Duplex Status */ ++// {0x2404, 10, 1, 0x30}, /* XRX200_MAC_PISR_RXPAUEN Receive Pause Enable Status */ ++// {0x2404, 9, 1, 0x30}, /* XRX200_MAC_PISR_TXPAUEN Transmit Pause Enable Status */ ++// {0x2404, 8, 1, 0x30}, /* XRX200_MAC_PISR_LPIOFF Receive Low-power Idle Mode is left */ ++// {0x2404, 7, 1, 0x30}, /* XRX200_MAC_PISR_LPION Receive Low-power Idle Mode is entered */ ++// {0x2404, 6, 1, 0x30}, /* XRX200_MAC_PISR_JAM Jam Status Detected */ ++// {0x2404, 5, 1, 0x30}, /* XRX200_MAC_PISR_TOOSHORT Too Short Frame Error Detected */ ++// {0x2404, 4, 1, 0x30}, /* XRX200_MAC_PISR_TOOLONG Too Long Frame Error Detected */ ++// {0x2404, 3, 1, 0x30}, /* XRX200_MAC_PISR_LENERR Length Mismatch Error Detected */ ++// {0x2404, 2, 1, 0x30}, /* XRX200_MAC_PISR_FCSERR Frame Checksum Error Detected */ ++// {0x2404, 1, 1, 0x30}, /* XRX200_MAC_PISR_TXPAUSE Pause Frame Transmitted */ ++// {0x2404, 0, 1, 0x30}, /* XRX200_MAC_PISR_RXPAUSE Pause Frame Received */ ++// {0x2408, 0, 16, 0x30}, /* XRX200_MAC_PIER MAC Interrupt Enable Register */ ++// {0x2408, 13, 1, 0x30}, /* XRX200_MAC_PIER_PACT PHY Active Status */ ++// {0x2408, 12, 1, 0x30}, /* XRX200_MAC_PIER_SPEED Megabit Speed Status */ ++// {0x2408, 11, 1, 0x30}, /* XRX200_MAC_PIER_FDUP Full Duplex Status */ ++// {0x2408, 10, 1, 0x30}, /* XRX200_MAC_PIER_RXPAUEN Receive Pause Enable Status */ ++// {0x2408, 9, 1, 0x30}, /* XRX200_MAC_PIER_TXPAUEN Transmit Pause Enable Status */ ++// {0x2408, 8, 1, 0x30}, /* XRX200_MAC_PIER_LPIOFF Low-power Idle Off Interrupt Mask */ ++// {0x2408, 7, 1, 0x30}, /* XRX200_MAC_PIER_LPION Low-power Idle On Interrupt Mask */ ++// {0x2408, 6, 1, 0x30}, /* XRX200_MAC_PIER_JAM Jam Status Interrupt Mask */ ++// {0x2408, 5, 1, 0x30}, /* XRX200_MAC_PIER_TOOSHORT Too Short Frame Error Interrupt Mask */ ++// {0x2408, 4, 1, 0x30}, /* XRX200_MAC_PIER_TOOLONG Too Long Frame Error Interrupt Mask */ ++// {0x2408, 3, 1, 0x30}, /* XRX200_MAC_PIER_LENERR Length Mismatch Error Interrupt Mask */ ++// {0x2408, 2, 1, 0x30}, /* XRX200_MAC_PIER_FCSERR Frame Checksum Error Interrupt Mask */ ++// {0x2408, 1, 1, 0x30}, /* XRX200_MAC_PIER_TXPAUSE Transmit Pause Frame Interrupt Mask */ ++// {0x2408, 0, 1, 0x30}, /* XRX200_MAC_PIER_RXPAUSE Receive Pause Frame Interrupt Mask */ ++// {0x240C, 0, 16, 0x30}, /* XRX200_MAC_CTRL_0 MAC Control Register0 */ ++// {0x240C, 13, 2, 0x30}, /* XRX200_MAC_CTRL_0_LCOL Late Collision Control */ ++// {0x240C, 12, 1, 0x30}, /* XRX200_MAC_CTRL_0_BM Burst Mode Control */ ++// {0x240C, 11, 1, 0x30}, /* XRX200_MAC_CTRL_0_APADEN Automatic VLAN Padding Enable */ ++// {0x240C, 10, 1, 0x30}, /* XRX200_MAC_CTRL_0_VPAD2EN Stacked VLAN Padding Enable */ ++// {0x240C, 9, 1, 0x30}, /* XRX200_MAC_CTRL_0_VPADEN VLAN Padding Enable */ ++// {0x240C, 8, 1, 0x30}, /* XRX200_MAC_CTRL_0_PADEN Padding Enable */ ++// {0x240C, 7, 1, 0x30}, /* XRX200_MAC_CTRL_0_FCS Transmit FCS Control */ ++ {0x240C, 4, 3, 0x30}, /* XRX200_MAC_CTRL_0_FCON Flow Control Mode */ ++// {0x240C, 2, 2, 0x30}, /* XRX200_MAC_CTRL_0_FDUP Full Duplex Control */ ++// {0x240C, 0, 2, 0x30}, /* XRX200_MAC_CTRL_0_GMII GMII/MII interface mode selection */ ++// {0x2410, 0, 16, 0x30}, /* XRX200_MAC_CTRL_1 MAC Control Register1 */ ++// {0x2410, 8, 1, 0x30}, /* XRX200_MAC_CTRL_1_SHORTPRE Short Preamble Control */ ++// {0x2410, 0, 4, 0x30}, /* XRX200_MAC_CTRL_1_IPG Minimum Inter Packet Gap Size */ ++// {0x2414, 0, 16, 0x30}, /* XRX200_MAC_CTRL_2 MAC Control Register2 */ ++// {0x2414, 3, 1, 0x30}, /* XRX200_MAC_CTRL_2_MLEN Maximum Untagged Frame Length */ ++// {0x2414, 2, 1, 0x30}, /* XRX200_MAC_CTRL_2_LCHKL Frame Length Check Long Enable */ ++// {0x2414, 0, 2, 0x30}, /* XRX200_MAC_CTRL_2_LCHKS Frame Length Check Short Enable */ ++// {0x2418, 0, 16, 0x30}, /* XRX200_MAC_CTRL_3 MAC Control Register3 */ ++// {0x2418, 0, 4, 0x30}, /* XRX200_MAC_CTRL_3_RCNT Retry Count */ ++// {0x241C, 0, 16, 0x30}, /* XRX200_MAC_CTRL_4 MAC Control Register4 */ ++// {0x241C, 7, 1, 0x30}, /* XRX200_MAC_CTRL_4_LPIEN LPI Mode Enable */ ++// {0x241C, 0, 7, 0x30}, /* XRX200_MAC_CTRL_4_WAIT LPI Wait Time */ ++// {0x2420, 0, 16, 0x30}, /* XRX200_MAC_CTRL_5_PJPS MAC Control Register5 */ ++// {0x2420, 1, 1, 0x30}, /* XRX200_MAC_CTRL_5_PJPS_NOBP Prolonged Jam pattern size during no-backpressure state */ ++// {0x2420, 0, 1, 0x30}, /* XRX200_MAC_CTRL_5_PJPS_BP Prolonged Jam pattern size during backpressure state */ ++// {0x2424, 0, 16, 0x30}, /* XRX200_MAC_CTRL_6_XBUF Transmit and ReceiveBuffer Control Register */ ++// {0x2424, 9, 3, 0x30}, /* XRX200_MAC_CTRL_6_RBUF_DLY_WP Delay */ ++// {0x2424, 8, 1, 0x30}, /* XRX200_MAC_CTRL_6_RBUF_INIT Receive Buffer Initialization */ ++// {0x2424, 6, 1, 0x30}, /* XRX200_MAC_CTRL_6_RBUF_BYPASS Bypass the Receive Buffer */ ++// {0x2424, 3, 3, 0x30}, /* XRX200_MAC_CTRL_6_XBUF_DLY_WP Delay */ ++// {0x2424, 2, 1, 0x30}, /* XRX200_MAC_CTRL_6_XBUF_INIT Initialize the Transmit Buffer */ ++// {0x2424, 0, 1, 0x30}, /* XRX200_MAC_CTRL_6_XBUF_BYPASS Bypass the Transmit Buffer */ ++// {0x2428, 0, 16, 0x30}, /* XRX200_MAC_BUFST_XBUF MAC Receive and TransmitBuffer Status Register */ ++// {0x2428, 3, 1, 0x30}, /* XRX200_MAC_BUFST_RBUF_UFL Receive Buffer Underflow Indicator */ ++// {0x2428, 2, 1, 0x30}, /* XRX200_MAC_BUFST_RBUF_OFL Receive Buffer Overflow Indicator */ ++// {0x2428, 1, 1, 0x30}, /* XRX200_MAC_BUFST_XBUF_UFL Transmit Buffer Underflow Indicator */ ++// {0x2428, 0, 1, 0x30}, /* XRX200_MAC_BUFST_XBUF_OFL Transmit Buffer Overflow Indicator */ ++// {0x242C, 0, 16, 0x30}, /* XRX200_MAC_TESTEN MAC Test Enable Register */ ++// {0x242C, 2, 1, 0x30}, /* XRX200_MAC_TESTEN_JTEN Jitter Test Enable */ ++// {0x242C, 1, 1, 0x30}, /* XRX200_MAC_TESTEN_TXER Transmit Error Insertion */ ++// {0x242C, 0, 1, 0x30}, /* XRX200_MAC_TESTEN_LOOP MAC Loopback Enable */ ++// {0x2900, 0, 16, 0x00}, /* XRX200_FDMA_CTRL Ethernet Switch FetchDMA Control Register */ ++// {0x2900, 7, 5, 0x00}, /* XRX200_FDMA_CTRL_LPI_THRESHOLD Low Power Idle Threshold */ ++// {0x2900, 4, 3, 0x00}, /* XRX200_FDMA_CTRL_LPI_MODE Low Power Idle Mode */ ++// {0x2900, 2, 2, 0x00}, /* XRX200_FDMA_CTRL_EGSTAG Egress Special Tag Size */ ++// {0x2900, 1, 1, 0x00}, /* XRX200_FDMA_CTRL_IGSTAG Ingress Special Tag Size */ ++// {0x2900, 0, 1, 0x00}, /* XRX200_FDMA_CTRL_EXCOL Excessive Collision Handling */ ++// {0x2904, 0, 16, 0x00}, /* XRX200_FDMA_STETYPE Special Tag EthertypeControl Register */ ++// {0x2904, 0, 16, 0x00}, /* XRX200_FDMA_STETYPE_ETYPE Special Tag Ethertype */ ++// {0x2908, 0, 16, 0x00}, /* XRX200_FDMA_VTETYPE VLAN Tag EthertypeControl Register */ ++// {0x2908, 0, 16, 0x00}, /* XRX200_FDMA_VTETYPE_ETYPE VLAN Tag Ethertype */ ++// {0x290C, 0, 16, 0x00}, /* XRX200_FDMA_STAT_0 FDMA Status Register0 */ ++// {0x290C, 0, 16, 0x00}, /* XRX200_FDMA_STAT_0_FSMS FSM states status */ ++// {0x2910, 0, 16, 0x00}, /* XRX200_FDMA_IER Fetch DMA Global InterruptEnable Register */ ++// {0x2910, 14, 1, 0x00}, /* XRX200_FDMA_IER_PCKD Packet Drop Interrupt Enable */ ++// {0x2910, 13, 1, 0x00}, /* XRX200_FDMA_IER_PCKR Packet Ready Interrupt Enable */ ++// {0x2910, 0, 8, 0x00}, /* XRX200_FDMA_IER_PCKT Packet Sent Interrupt Enable */ ++// {0x2914, 0, 16, 0x00}, /* XRX200_FDMA_ISR Fetch DMA Global InterruptStatus Register */ ++// {0x2914, 14, 1, 0x00}, /* XRX200_FDMA_ISR_PCKTD Packet Drop */ ++// {0x2914, 13, 1, 0x00}, /* XRX200_FDMA_ISR_PCKR Packet is Ready for Transmission */ ++// {0x2914, 0, 8, 0x00}, /* XRX200_FDMA_ISR_PCKT Packet Sent Event */ ++// {0x2A00, 0, 16, 0x18}, /* XRX200_FDMA_PCTRL Ethernet SwitchFetch DMA Port Control Register */ ++// {0x2A00, 3, 2, 0x18}, /* XRX200_FDMA_PCTRL_VLANMOD VLAN Modification Enable */ ++// {0x2A00, 2, 1, 0x18}, /* XRX200_FDMA_PCTRL_DSCPRM DSCP Re-marking Enable */ ++// {0x2A00, 1, 1, 0x18}, /* XRX200_FDMA_PCTRL_STEN Special Tag Insertion Enable */ ++// {0x2A00, 0, 1, 0x18}, /* XRX200_FDMA_PCTRL_EN FDMA Port Enable */ ++// {0x2A04, 0, 16, 0x18}, /* XRX200_FDMA_PRIO Ethernet SwitchFetch DMA Port Priority Register */ ++// {0x2A04, 0, 2, 0x18}, /* XRX200_FDMA_PRIO_PRIO FDMA PRIO */ ++// {0x2A08, 0, 16, 0x18}, /* XRX200_FDMA_PSTAT0 Ethernet SwitchFetch DMA Port Status Register 0 */ ++// {0x2A08, 15, 1, 0x18}, /* XRX200_FDMA_PSTAT0_PKT_AVAIL Port Egress Packet Available */ ++// {0x2A08, 14, 1, 0x18}, /* XRX200_FDMA_PSTAT0_POK Port Status OK */ ++// {0x2A08, 0, 6, 0x18}, /* XRX200_FDMA_PSTAT0_PSEG Port Egress Segment Count */ ++// {0x2A0C, 0, 16, 0x18}, /* XRX200_FDMA_PSTAT1_HDR Ethernet SwitchFetch DMA Port Status Register 1 */ ++// {0x2A0C, 0, 10, 0x18}, /* XRX200_FDMA_PSTAT1_HDR_PTR Header Pointer */ ++// {0x2A10, 0, 16, 0x18}, /* XRX200_FDMA_TSTAMP0 Egress TimeStamp Register 0 */ ++// {0x2A10, 0, 16, 0x18}, /* XRX200_FDMA_TSTAMP0_TSTL Time Stamp [15:0] */ ++// {0x2A14, 0, 16, 0x18}, /* XRX200_FDMA_TSTAMP1 Egress TimeStamp Register 1 */ ++// {0x2A14, 0, 16, 0x18}, /* XRX200_FDMA_TSTAMP1_TSTH Time Stamp [31:16] */ ++// {0x2D00, 0, 16, 0x00}, /* XRX200_SDMA_CTRL Ethernet Switch StoreDMA Control Register */ ++// {0x2D00, 0, 1, 0x00}, /* XRX200_SDMA_CTRL_TSTEN Time Stamp Enable */ ++// {0x2D04, 0, 16, 0x00}, /* XRX200_SDMA_FCTHR1 SDMA Flow Control Threshold1 Register */ ++// {0x2D04, 0, 10, 0x00}, /* XRX200_SDMA_FCTHR1_THR1 Threshold 1 */ ++// {0x2D08, 0, 16, 0x00}, /* XRX200_SDMA_FCTHR2 SDMA Flow Control Threshold2 Register */ ++// {0x2D08, 0, 10, 0x00}, /* XRX200_SDMA_FCTHR2_THR2 Threshold 2 */ ++// {0x2D0C, 0, 16, 0x00}, /* XRX200_SDMA_FCTHR3 SDMA Flow Control Threshold3 Register */ ++// {0x2D0C, 0, 10, 0x00}, /* XRX200_SDMA_FCTHR3_THR3 Threshold 3 */ ++// {0x2D10, 0, 16, 0x00}, /* XRX200_SDMA_FCTHR4 SDMA Flow Control Threshold4 Register */ ++// {0x2D10, 0, 10, 0x00}, /* XRX200_SDMA_FCTHR4_THR4 Threshold 4 */ ++// {0x2D14, 0, 16, 0x00}, /* XRX200_SDMA_FCTHR5 SDMA Flow Control Threshold5 Register */ ++// {0x2D14, 0, 10, 0x00}, /* XRX200_SDMA_FCTHR5_THR5 Threshold 5 */ ++// {0x2D18, 0, 16, 0x00}, /* XRX200_SDMA_FCTHR6 SDMA Flow Control Threshold6 Register */ ++// {0x2D18, 0, 10, 0x00}, /* XRX200_SDMA_FCTHR6_THR6 Threshold 6 */ ++// {0x2D1C, 0, 16, 0x00}, /* XRX200_SDMA_FCTHR7 SDMA Flow Control Threshold7 Register */ ++// {0x2D1C, 0, 11, 0x00}, /* XRX200_SDMA_FCTHR7_THR7 Threshold 7 */ ++// {0x2D20, 0, 16, 0x00}, /* XRX200_SDMA_STAT_0 SDMA Status Register0 */ ++// {0x2D20, 4, 3, 0x00}, /* XRX200_SDMA_STAT_0_BPS_FILL Back Pressure Status */ ++// {0x2D20, 2, 2, 0x00}, /* XRX200_SDMA_STAT_0_BPS_PNT Back Pressure Status */ ++// {0x2D20, 0, 2, 0x00}, /* XRX200_SDMA_STAT_0_DROP Back Pressure Status */ ++// {0x2D24, 0, 16, 0x00}, /* XRX200_SDMA_STAT_1 SDMA Status Register1 */ ++// {0x2D24, 0, 10, 0x00}, /* XRX200_SDMA_STAT_1_FILL Buffer Filling Level */ ++// {0x2D28, 0, 16, 0x00}, /* XRX200_SDMA_STAT_2 SDMA Status Register2 */ ++// {0x2D28, 0, 16, 0x00}, /* XRX200_SDMA_STAT_2_FSMS FSM states status */ ++// {0x2D2C, 0, 16, 0x00}, /* XRX200_SDMA_IER SDMA Interrupt Enable Register */ ++// {0x2D2C, 15, 1, 0x00}, /* XRX200_SDMA_IER_BPEX Buffer Pointers Exceeded */ ++// {0x2D2C, 14, 1, 0x00}, /* XRX200_SDMA_IER_BFULL Buffer Full */ ++// {0x2D2C, 13, 1, 0x00}, /* XRX200_SDMA_IER_FERR Frame Error */ ++// {0x2D2C, 0, 8, 0x00}, /* XRX200_SDMA_IER_FRX Frame Received Successfully */ ++// {0x2D30, 0, 16, 0x00}, /* XRX200_SDMA_ISR SDMA Interrupt Status Register */ ++// {0x2D30, 15, 1, 0x00}, /* XRX200_SDMA_ISR_BPEX Packet Descriptors Exceeded */ ++// {0x2D30, 14, 1, 0x00}, /* XRX200_SDMA_ISR_BFULL Buffer Full */ ++// {0x2D30, 13, 1, 0x00}, /* XRX200_SDMA_ISR_FERR Frame Error */ ++// {0x2D30, 0, 8, 0x00}, /* XRX200_SDMA_ISR_FRX Frame Received Successfully */ ++// {0x2F00, 0, 16, 0x18}, /* XRX200_SDMA_PCTRL Ethernet SwitchStore DMA Port Control Register */ ++// {0x2F00, 13, 2, 0x18}, /* XRX200_SDMA_PCTRL_DTHR Drop Threshold Selection */ ++// {0x2F00, 11, 2, 0x18}, /* XRX200_SDMA_PCTRL_PTHR Pause Threshold Selection */ ++// {0x2F00, 10, 1, 0x18}, /* XRX200_SDMA_PCTRL_PHYEFWD Forward PHY Error Frames */ ++// {0x2F00, 9, 1, 0x18}, /* XRX200_SDMA_PCTRL_ALGFWD Forward Alignment Error Frames */ ++// {0x2F00, 8, 1, 0x18}, /* XRX200_SDMA_PCTRL_LENFWD Forward Length Errored Frames */ ++// {0x2F00, 7, 1, 0x18}, /* XRX200_SDMA_PCTRL_OSFWD Forward Oversized Frames */ ++// {0x2F00, 6, 1, 0x18}, /* XRX200_SDMA_PCTRL_USFWD Forward Undersized Frames */ ++// {0x2F00, 5, 1, 0x18}, /* XRX200_SDMA_PCTRL_FCSIGN Ignore FCS Errors */ ++// {0x2F00, 4, 1, 0x18}, /* XRX200_SDMA_PCTRL_FCSFWD Forward FCS Errored Frames */ ++// {0x2F00, 3, 1, 0x18}, /* XRX200_SDMA_PCTRL_PAUFWD Pause Frame Forwarding */ ++// {0x2F00, 2, 1, 0x18}, /* XRX200_SDMA_PCTRL_MFCEN Metering Flow Control Enable */ ++// {0x2F00, 1, 1, 0x18}, /* XRX200_SDMA_PCTRL_FCEN Flow Control Enable */ ++// {0x2F00, 0, 1, 0x18}, /* XRX200_SDMA_PCTRL_PEN Port Enable */ ++// {0x2F04, 0, 16, 0x18}, /* XRX200_SDMA_PRIO Ethernet SwitchStore DMA Port Priority Register */ ++// {0x2F04, 0, 2, 0x18}, /* XRX200_SDMA_PRIO_PRIO SDMA PRIO */ ++// {0x2F08, 0, 16, 0x18}, /* XRX200_SDMA_PSTAT0_HDR Ethernet SwitchStore DMA Port Status Register 0 */ ++// {0x2F08, 0, 10, 0x18}, /* XRX200_SDMA_PSTAT0_HDR_PTR Port Ingress Queue Header Pointer */ ++// {0x2F0C, 0, 16, 0x18}, /* XRX200_SDMA_PSTAT1 Ethernet SwitchStore DMA Port Status Register 1 */ ++// {0x2F0C, 0, 10, 0x18}, /* XRX200_SDMA_PSTAT1_PPKT Port Ingress Packet Count */ ++// {0x2F10, 0, 16, 0x18}, /* XRX200_SDMA_TSTAMP0 Ingress TimeStamp Register 0 */ ++// {0x2F10, 0, 16, 0x18}, /* XRX200_SDMA_TSTAMP0_TSTL Time Stamp [15:0] */ ++// {0x2F14, 0, 16, 0x18}, /* XRX200_SDMA_TSTAMP1 Ingress TimeStamp Register 1 */ ++// {0x2F14, 0, 16, 0x18}, /* XRX200_SDMA_TSTAMP1_TSTH Time Stamp [31:16] */ ++}; ++ ++ diff --git a/target/linux/lantiq/patches-4.1/0026-NET-multi-phy-support.patch b/target/linux/lantiq/patches-4.1/0026-NET-multi-phy-support.patch new file mode 100644 index 0000000000..2967bae2a9 --- /dev/null +++ b/target/linux/lantiq/patches-4.1/0026-NET-multi-phy-support.patch @@ -0,0 +1,53 @@ +From c6feeeb407a3b8a6597ae377ba4dd138e185e3dd Mon Sep 17 00:00:00 2001 +From: John Crispin +Date: Sun, 27 Jul 2014 09:38:50 +0100 +Subject: [PATCH 26/36] NET: multi phy support + +Signed-off-by: John Crispin +--- + drivers/net/phy/phy.c | 9 ++++++--- + include/linux/phy.h | 1 + + 2 files changed, 7 insertions(+), 3 deletions(-) + +--- a/drivers/net/phy/phy.c ++++ b/drivers/net/phy/phy.c +@@ -855,7 +855,8 @@ void phy_state_machine(struct work_struc + /* If the link is down, give up on negotiation for now */ + if (!phydev->link) { + phydev->state = PHY_NOLINK; +- netif_carrier_off(phydev->attached_dev); ++ if (!phydev->no_auto_carrier_off) ++ netif_carrier_off(phydev->attached_dev); + phydev->adjust_link(phydev->attached_dev); + break; + } +@@ -928,7 +929,8 @@ void phy_state_machine(struct work_struc + netif_carrier_on(phydev->attached_dev); + } else { + phydev->state = PHY_NOLINK; +- netif_carrier_off(phydev->attached_dev); ++ if (!phydev->no_auto_carrier_off) ++ netif_carrier_off(phydev->attached_dev); + } + + phydev->adjust_link(phydev->attached_dev); +@@ -940,7 +942,8 @@ void phy_state_machine(struct work_struc + case PHY_HALTED: + if (phydev->link) { + phydev->link = 0; +- netif_carrier_off(phydev->attached_dev); ++ if (!phydev->no_auto_carrier_off) ++ netif_carrier_off(phydev->attached_dev); + phydev->adjust_link(phydev->attached_dev); + do_suspend = true; + } +--- a/include/linux/phy.h ++++ b/include/linux/phy.h +@@ -367,6 +367,7 @@ struct phy_device { + bool is_internal; + bool has_fixups; + bool suspended; ++ bool no_auto_carrier_off; + + enum phy_state state; + diff --git a/target/linux/lantiq/patches-4.1/0028-NET-lantiq-various-etop-fixes.patch b/target/linux/lantiq/patches-4.1/0028-NET-lantiq-various-etop-fixes.patch new file mode 100644 index 0000000000..e0421e98a8 --- /dev/null +++ b/target/linux/lantiq/patches-4.1/0028-NET-lantiq-various-etop-fixes.patch @@ -0,0 +1,907 @@ +From 870ed9cae083ff8a60a739ef7e74c5a1800533be Mon Sep 17 00:00:00 2001 +From: John Crispin +Date: Tue, 9 Sep 2014 22:45:34 +0200 +Subject: [PATCH 28/36] NET: lantiq: various etop fixes + +Signed-off-by: John Crispin +--- + drivers/net/ethernet/lantiq_etop.c | 555 +++++++++++++++++++++++++----------- + 1 file changed, 389 insertions(+), 166 deletions(-) + +--- a/drivers/net/ethernet/lantiq_etop.c ++++ b/drivers/net/ethernet/lantiq_etop.c +@@ -11,7 +11,7 @@ + * You should have received a copy of the GNU General Public License + * along with this program; if not, see . + * +- * Copyright (C) 2011 John Crispin ++ * Copyright (C) 2011-12 John Crispin + */ + + #include +@@ -30,11 +30,16 @@ + #include + #include + #include ++#include + #include + #include + #include + #include + #include ++#include ++#include ++#include ++#include + + #include + +@@ -42,7 +47,7 @@ + #include + #include + +-#define LTQ_ETOP_MDIO 0x11804 ++#define LTQ_ETOP_MDIO_ACC 0x11804 + #define MDIO_REQUEST 0x80000000 + #define MDIO_READ 0x40000000 + #define MDIO_ADDR_MASK 0x1f +@@ -51,44 +56,91 @@ + #define MDIO_REG_OFFSET 0x10 + #define MDIO_VAL_MASK 0xffff + +-#define PPE32_CGEN 0x800 +-#define LQ_PPE32_ENET_MAC_CFG 0x1840 ++#define LTQ_ETOP_MDIO_CFG 0x11800 ++#define MDIO_CFG_MASK 0x6 ++ ++#define LTQ_ETOP_CFG 0x11808 ++#define LTQ_ETOP_IGPLEN 0x11820 ++#define LTQ_ETOP_MAC_CFG 0x11840 + + #define LTQ_ETOP_ENETS0 0x11850 + #define LTQ_ETOP_MAC_DA0 0x1186C + #define LTQ_ETOP_MAC_DA1 0x11870 +-#define LTQ_ETOP_CFG 0x16020 +-#define LTQ_ETOP_IGPLEN 0x16080 ++ ++#define MAC_CFG_MASK 0xfff ++#define MAC_CFG_CGEN (1 << 11) ++#define MAC_CFG_DUPLEX (1 << 2) ++#define MAC_CFG_SPEED (1 << 1) ++#define MAC_CFG_LINK (1 << 0) + + #define MAX_DMA_CHAN 0x8 + #define MAX_DMA_CRC_LEN 0x4 + #define MAX_DMA_DATA_LEN 0x600 + + #define ETOP_FTCU BIT(28) +-#define ETOP_MII_MASK 0xf +-#define ETOP_MII_NORMAL 0xd +-#define ETOP_MII_REVERSE 0xe + #define ETOP_PLEN_UNDER 0x40 +-#define ETOP_CGEN 0x800 ++#define ETOP_CFG_MII0 0x01 + +-/* use 2 static channels for TX/RX */ +-#define LTQ_ETOP_TX_CHANNEL 1 +-#define LTQ_ETOP_RX_CHANNEL 6 +-#define IS_TX(x) (x == LTQ_ETOP_TX_CHANNEL) +-#define IS_RX(x) (x == LTQ_ETOP_RX_CHANNEL) ++#define ETOP_CFG_MASK 0xfff ++#define ETOP_CFG_FEN0 (1 << 8) ++#define ETOP_CFG_SEN0 (1 << 6) ++#define ETOP_CFG_OFF1 (1 << 3) ++#define ETOP_CFG_REMII0 (1 << 1) ++#define ETOP_CFG_OFF0 (1 << 0) ++ ++#define LTQ_GBIT_MDIO_CTL 0xCC ++#define LTQ_GBIT_MDIO_DATA 0xd0 ++#define LTQ_GBIT_GCTL0 0x68 ++#define LTQ_GBIT_PMAC_HD_CTL 0x8c ++#define LTQ_GBIT_P0_CTL 0x4 ++#define LTQ_GBIT_PMAC_RX_IPG 0xa8 ++#define LTQ_GBIT_RGMII_CTL 0x78 ++ ++#define PMAC_HD_CTL_AS (1 << 19) ++#define PMAC_HD_CTL_RXSH (1 << 22) ++ ++/* Switch Enable (0=disable, 1=enable) */ ++#define GCTL0_SE 0x80000000 ++/* Disable MDIO auto polling (0=disable, 1=enable) */ ++#define PX_CTL_DMDIO 0x00400000 ++ ++/* MDC clock divider, clock = 25MHz/((MDC_CLOCK + 1) * 2) */ ++#define MDC_CLOCK_MASK 0xff000000 ++#define MDC_CLOCK_OFFSET 24 ++ ++/* register information for the gbit's MDIO bus */ ++#define MDIO_XR9_REQUEST 0x00008000 ++#define MDIO_XR9_READ 0x00000800 ++#define MDIO_XR9_WRITE 0x00000400 ++#define MDIO_XR9_REG_MASK 0x1f ++#define MDIO_XR9_ADDR_MASK 0x1f ++#define MDIO_XR9_RD_MASK 0xffff ++#define MDIO_XR9_REG_OFFSET 0 ++#define MDIO_XR9_ADDR_OFFSET 5 ++#define MDIO_XR9_WR_OFFSET 16 + ++#define LTQ_DMA_ETOP ((of_machine_is_compatible("lantiq,ase")) ? \ ++ (INT_NUM_IM3_IRL0) : (INT_NUM_IM2_IRL0)) ++ ++/* the newer xway socks have a embedded 3/7 port gbit multiplexer */ + #define ltq_etop_r32(x) ltq_r32(ltq_etop_membase + (x)) + #define ltq_etop_w32(x, y) ltq_w32(x, ltq_etop_membase + (y)) + #define ltq_etop_w32_mask(x, y, z) \ + ltq_w32_mask(x, y, ltq_etop_membase + (z)) + +-#define DRV_VERSION "1.0" ++#define ltq_gbit_r32(x) ltq_r32(ltq_gbit_membase + (x)) ++#define ltq_gbit_w32(x, y) ltq_w32(x, ltq_gbit_membase + (y)) ++#define ltq_gbit_w32_mask(x, y, z) \ ++ ltq_w32_mask(x, y, ltq_gbit_membase + (z)) ++ ++#define DRV_VERSION "1.2" + + static void __iomem *ltq_etop_membase; ++static void __iomem *ltq_gbit_membase; + + struct ltq_etop_chan { +- int idx; + int tx_free; ++ int irq; + struct net_device *netdev; + struct napi_struct napi; + struct ltq_dma_channel dma; +@@ -98,22 +150,35 @@ struct ltq_etop_chan { + struct ltq_etop_priv { + struct net_device *netdev; + struct platform_device *pdev; +- struct ltq_eth_data *pldata; + struct resource *res; + + struct mii_bus *mii_bus; + struct phy_device *phydev; + +- struct ltq_etop_chan ch[MAX_DMA_CHAN]; +- int tx_free[MAX_DMA_CHAN >> 1]; ++ struct ltq_etop_chan txch; ++ struct ltq_etop_chan rxch; ++ ++ int tx_irq; ++ int rx_irq; ++ ++ const void *mac; ++ int mii_mode; + + spinlock_t lock; ++ ++ struct clk *clk_ppe; ++ struct clk *clk_switch; ++ struct clk *clk_ephy; ++ struct clk *clk_ephycgu; + }; + ++static int ltq_etop_mdio_wr(struct mii_bus *bus, int phy_addr, ++ int phy_reg, u16 phy_data); ++ + static int + ltq_etop_alloc_skb(struct ltq_etop_chan *ch) + { +- ch->skb[ch->dma.desc] = netdev_alloc_skb(ch->netdev, MAX_DMA_DATA_LEN); ++ ch->skb[ch->dma.desc] = dev_alloc_skb(MAX_DMA_DATA_LEN); + if (!ch->skb[ch->dma.desc]) + return -ENOMEM; + ch->dma.desc_base[ch->dma.desc].addr = dma_map_single(NULL, +@@ -148,8 +213,11 @@ ltq_etop_hw_receive(struct ltq_etop_chan + spin_unlock_irqrestore(&priv->lock, flags); + + skb_put(skb, len); ++ skb->dev = ch->netdev; + skb->protocol = eth_type_trans(skb, ch->netdev); + netif_receive_skb(skb); ++ ch->netdev->stats.rx_packets++; ++ ch->netdev->stats.rx_bytes += len; + } + + static int +@@ -157,8 +225,10 @@ ltq_etop_poll_rx(struct napi_struct *nap + { + struct ltq_etop_chan *ch = container_of(napi, + struct ltq_etop_chan, napi); ++ struct ltq_etop_priv *priv = netdev_priv(ch->netdev); + int rx = 0; + int complete = 0; ++ unsigned long flags; + + while ((rx < budget) && !complete) { + struct ltq_dma_desc *desc = &ch->dma.desc_base[ch->dma.desc]; +@@ -172,7 +242,9 @@ ltq_etop_poll_rx(struct napi_struct *nap + } + if (complete || !rx) { + napi_complete(&ch->napi); ++ spin_lock_irqsave(&priv->lock, flags); + ltq_dma_ack_irq(&ch->dma); ++ spin_unlock_irqrestore(&priv->lock, flags); + } + return rx; + } +@@ -184,12 +256,14 @@ ltq_etop_poll_tx(struct napi_struct *nap + container_of(napi, struct ltq_etop_chan, napi); + struct ltq_etop_priv *priv = netdev_priv(ch->netdev); + struct netdev_queue *txq = +- netdev_get_tx_queue(ch->netdev, ch->idx >> 1); ++ netdev_get_tx_queue(ch->netdev, ch->dma.nr >> 1); + unsigned long flags; + + spin_lock_irqsave(&priv->lock, flags); + while ((ch->dma.desc_base[ch->tx_free].ctl & + (LTQ_DMA_OWN | LTQ_DMA_C)) == LTQ_DMA_C) { ++ ch->netdev->stats.tx_packets++; ++ ch->netdev->stats.tx_bytes += ch->skb[ch->tx_free]->len; + dev_kfree_skb_any(ch->skb[ch->tx_free]); + ch->skb[ch->tx_free] = NULL; + memset(&ch->dma.desc_base[ch->tx_free], 0, +@@ -202,7 +276,9 @@ ltq_etop_poll_tx(struct napi_struct *nap + if (netif_tx_queue_stopped(txq)) + netif_tx_start_queue(txq); + napi_complete(&ch->napi); ++ spin_lock_irqsave(&priv->lock, flags); + ltq_dma_ack_irq(&ch->dma); ++ spin_unlock_irqrestore(&priv->lock, flags); + return 1; + } + +@@ -210,9 +286,10 @@ static irqreturn_t + ltq_etop_dma_irq(int irq, void *_priv) + { + struct ltq_etop_priv *priv = _priv; +- int ch = irq - LTQ_DMA_CH0_INT; +- +- napi_schedule(&priv->ch[ch].napi); ++ if (irq == priv->txch.dma.irq) ++ napi_schedule(&priv->txch.napi); ++ else ++ napi_schedule(&priv->rxch.napi); + return IRQ_HANDLED; + } + +@@ -224,7 +301,7 @@ ltq_etop_free_channel(struct net_device + ltq_dma_free(&ch->dma); + if (ch->dma.irq) + free_irq(ch->dma.irq, priv); +- if (IS_RX(ch->idx)) { ++ if (ch == &priv->txch) { + int desc; + for (desc = 0; desc < LTQ_DESC_NUM; desc++) + dev_kfree_skb_any(ch->skb[ch->dma.desc]); +@@ -235,65 +312,133 @@ static void + ltq_etop_hw_exit(struct net_device *dev) + { + struct ltq_etop_priv *priv = netdev_priv(dev); +- int i; + +- ltq_pmu_disable(PMU_PPE); +- for (i = 0; i < MAX_DMA_CHAN; i++) +- if (IS_TX(i) || IS_RX(i)) +- ltq_etop_free_channel(dev, &priv->ch[i]); ++ clk_disable(priv->clk_ppe); ++ ++ if (of_machine_is_compatible("lantiq,ar9")) ++ clk_disable(priv->clk_switch); ++ ++ if (of_machine_is_compatible("lantiq,ase")) { ++ clk_disable(priv->clk_ephy); ++ clk_disable(priv->clk_ephycgu); ++ } ++ ++ ltq_etop_free_channel(dev, &priv->txch); ++ ltq_etop_free_channel(dev, &priv->rxch); ++} ++ ++static void ++ltq_etop_gbit_init(struct net_device *dev) ++{ ++ struct ltq_etop_priv *priv = netdev_priv(dev); ++ ++ clk_enable(priv->clk_switch); ++ ++ /* enable gbit port0 on the SoC */ ++ ltq_gbit_w32_mask((1 << 17), (1 << 18), LTQ_GBIT_P0_CTL); ++ ++ ltq_gbit_w32_mask(0, GCTL0_SE, LTQ_GBIT_GCTL0); ++ /* disable MDIO auto polling mode */ ++ ltq_gbit_w32_mask(0, PX_CTL_DMDIO, LTQ_GBIT_P0_CTL); ++ /* set 1522 packet size */ ++ ltq_gbit_w32_mask(0x300, 0, LTQ_GBIT_GCTL0); ++ /* disable pmac & dmac headers */ ++ ltq_gbit_w32_mask(PMAC_HD_CTL_AS | PMAC_HD_CTL_RXSH, 0, ++ LTQ_GBIT_PMAC_HD_CTL); ++ /* Due to traffic halt when burst length 8, ++ replace default IPG value with 0x3B */ ++ ltq_gbit_w32(0x3B, LTQ_GBIT_PMAC_RX_IPG); ++ /* set mdc clock to 2.5 MHz */ ++ ltq_gbit_w32_mask(MDC_CLOCK_MASK, 4 << MDC_CLOCK_OFFSET, ++ LTQ_GBIT_RGMII_CTL); + } + + static int + ltq_etop_hw_init(struct net_device *dev) + { + struct ltq_etop_priv *priv = netdev_priv(dev); +- int i; ++ int mii_mode = priv->mii_mode; + +- ltq_pmu_enable(PMU_PPE); ++ clk_enable(priv->clk_ppe); ++ ++ if (of_machine_is_compatible("lantiq,ar9")) { ++ ltq_etop_gbit_init(dev); ++ /* force the etops link to the gbit to MII */ ++ mii_mode = PHY_INTERFACE_MODE_MII; ++ } ++ ltq_etop_w32_mask(MDIO_CFG_MASK, 0, LTQ_ETOP_MDIO_CFG); ++ ltq_etop_w32_mask(MAC_CFG_MASK, MAC_CFG_CGEN | MAC_CFG_DUPLEX | ++ MAC_CFG_SPEED | MAC_CFG_LINK, LTQ_ETOP_MAC_CFG); + +- switch (priv->pldata->mii_mode) { ++ switch (mii_mode) { + case PHY_INTERFACE_MODE_RMII: +- ltq_etop_w32_mask(ETOP_MII_MASK, +- ETOP_MII_REVERSE, LTQ_ETOP_CFG); ++ ltq_etop_w32_mask(ETOP_CFG_MASK, ETOP_CFG_REMII0 | ETOP_CFG_OFF1 | ++ ETOP_CFG_SEN0 | ETOP_CFG_FEN0, LTQ_ETOP_CFG); + break; + + case PHY_INTERFACE_MODE_MII: +- ltq_etop_w32_mask(ETOP_MII_MASK, +- ETOP_MII_NORMAL, LTQ_ETOP_CFG); ++ ltq_etop_w32_mask(ETOP_CFG_MASK, ETOP_CFG_OFF1 | ++ ETOP_CFG_SEN0 | ETOP_CFG_FEN0, LTQ_ETOP_CFG); + break; + + default: ++ if (of_machine_is_compatible("lantiq,ase")) { ++ clk_enable(priv->clk_ephy); ++ /* disable external MII */ ++ ltq_etop_w32_mask(0, ETOP_CFG_MII0, LTQ_ETOP_CFG); ++ /* enable clock for internal PHY */ ++ clk_enable(priv->clk_ephycgu); ++ /* we need to write this magic to the internal phy to ++ make it work */ ++ ltq_etop_mdio_wr(NULL, 0x8, 0x12, 0xC020); ++ pr_info("Selected EPHY mode\n"); ++ break; ++ } + netdev_err(dev, "unknown mii mode %d\n", +- priv->pldata->mii_mode); ++ mii_mode); + return -ENOTSUPP; + } + +- /* enable crc generation */ +- ltq_etop_w32(PPE32_CGEN, LQ_PPE32_ENET_MAC_CFG); ++ return 0; ++} ++ ++static int ++ltq_etop_dma_init(struct net_device *dev) ++{ ++ struct ltq_etop_priv *priv = netdev_priv(dev); ++ int tx = priv->tx_irq - LTQ_DMA_ETOP; ++ int rx = priv->rx_irq - LTQ_DMA_ETOP; ++ int err; + + ltq_dma_init_port(DMA_PORT_ETOP); + +- for (i = 0; i < MAX_DMA_CHAN; i++) { +- int irq = LTQ_DMA_CH0_INT + i; +- struct ltq_etop_chan *ch = &priv->ch[i]; +- +- ch->idx = ch->dma.nr = i; +- +- if (IS_TX(i)) { +- ltq_dma_alloc_tx(&ch->dma); +- request_irq(irq, ltq_etop_dma_irq, 0, "etop_tx", priv); +- } else if (IS_RX(i)) { +- ltq_dma_alloc_rx(&ch->dma); +- for (ch->dma.desc = 0; ch->dma.desc < LTQ_DESC_NUM; +- ch->dma.desc++) +- if (ltq_etop_alloc_skb(ch)) +- return -ENOMEM; +- ch->dma.desc = 0; +- request_irq(irq, ltq_etop_dma_irq, 0, "etop_rx", priv); ++ priv->txch.dma.nr = tx; ++ ltq_dma_alloc_tx(&priv->txch.dma); ++ err = request_irq(priv->tx_irq, ltq_etop_dma_irq, 0, "eth_tx", priv); ++ if (err) { ++ netdev_err(dev, "failed to allocate tx irq\n"); ++ goto err_out; ++ } ++ priv->txch.dma.irq = priv->tx_irq; ++ ++ priv->rxch.dma.nr = rx; ++ ltq_dma_alloc_rx(&priv->rxch.dma); ++ for (priv->rxch.dma.desc = 0; priv->rxch.dma.desc < LTQ_DESC_NUM; ++ priv->rxch.dma.desc++) { ++ if (ltq_etop_alloc_skb(&priv->rxch)) { ++ netdev_err(dev, "failed to allocate skbs\n"); ++ err = -ENOMEM; ++ goto err_out; + } +- ch->dma.irq = irq; + } +- return 0; ++ priv->rxch.dma.desc = 0; ++ err = request_irq(priv->rx_irq, ltq_etop_dma_irq, 0, "eth_rx", priv); ++ if (err) ++ netdev_err(dev, "failed to allocate rx irq\n"); ++ else ++ priv->rxch.dma.irq = priv->rx_irq; ++err_out: ++ return err; + } + + static void +@@ -309,7 +454,10 @@ ltq_etop_get_settings(struct net_device + { + struct ltq_etop_priv *priv = netdev_priv(dev); + +- return phy_ethtool_gset(priv->phydev, cmd); ++ if (priv->phydev) ++ return phy_ethtool_gset(priv->phydev, cmd); ++ else ++ return 0; + } + + static int +@@ -317,7 +465,10 @@ ltq_etop_set_settings(struct net_device + { + struct ltq_etop_priv *priv = netdev_priv(dev); + +- return phy_ethtool_sset(priv->phydev, cmd); ++ if (priv->phydev) ++ return phy_ethtool_sset(priv->phydev, cmd); ++ else ++ return 0; + } + + static int +@@ -325,7 +476,10 @@ ltq_etop_nway_reset(struct net_device *d + { + struct ltq_etop_priv *priv = netdev_priv(dev); + +- return phy_start_aneg(priv->phydev); ++ if (priv->phydev) ++ return phy_start_aneg(priv->phydev); ++ else ++ return 0; + } + + static const struct ethtool_ops ltq_etop_ethtool_ops = { +@@ -336,6 +490,39 @@ static const struct ethtool_ops ltq_etop + }; + + static int ++ltq_etop_mdio_wr_xr9(struct mii_bus *bus, int phy_addr, ++ int phy_reg, u16 phy_data) ++{ ++ u32 val = MDIO_XR9_REQUEST | MDIO_XR9_WRITE | ++ (phy_data << MDIO_XR9_WR_OFFSET) | ++ ((phy_addr & MDIO_XR9_ADDR_MASK) << MDIO_XR9_ADDR_OFFSET) | ++ ((phy_reg & MDIO_XR9_REG_MASK) << MDIO_XR9_REG_OFFSET); ++ ++ while (ltq_gbit_r32(LTQ_GBIT_MDIO_CTL) & MDIO_XR9_REQUEST) ++ ; ++ ltq_gbit_w32(val, LTQ_GBIT_MDIO_CTL); ++ while (ltq_gbit_r32(LTQ_GBIT_MDIO_CTL) & MDIO_XR9_REQUEST) ++ ; ++ return 0; ++} ++ ++static int ++ltq_etop_mdio_rd_xr9(struct mii_bus *bus, int phy_addr, int phy_reg) ++{ ++ u32 val = MDIO_XR9_REQUEST | MDIO_XR9_READ | ++ ((phy_addr & MDIO_XR9_ADDR_MASK) << MDIO_XR9_ADDR_OFFSET) | ++ ((phy_reg & MDIO_XR9_REG_MASK) << MDIO_XR9_REG_OFFSET); ++ ++ while (ltq_gbit_r32(LTQ_GBIT_MDIO_CTL) & MDIO_XR9_REQUEST) ++ ; ++ ltq_gbit_w32(val, LTQ_GBIT_MDIO_CTL); ++ while (ltq_gbit_r32(LTQ_GBIT_MDIO_CTL) & MDIO_XR9_REQUEST) ++ ; ++ val = ltq_gbit_r32(LTQ_GBIT_MDIO_DATA) & MDIO_XR9_RD_MASK; ++ return val; ++} ++ ++static int + ltq_etop_mdio_wr(struct mii_bus *bus, int phy_addr, int phy_reg, u16 phy_data) + { + u32 val = MDIO_REQUEST | +@@ -343,9 +530,9 @@ ltq_etop_mdio_wr(struct mii_bus *bus, in + ((phy_reg & MDIO_REG_MASK) << MDIO_REG_OFFSET) | + phy_data; + +- while (ltq_etop_r32(LTQ_ETOP_MDIO) & MDIO_REQUEST) ++ while (ltq_etop_r32(LTQ_ETOP_MDIO_ACC) & MDIO_REQUEST) + ; +- ltq_etop_w32(val, LTQ_ETOP_MDIO); ++ ltq_etop_w32(val, LTQ_ETOP_MDIO_ACC); + return 0; + } + +@@ -356,12 +543,12 @@ ltq_etop_mdio_rd(struct mii_bus *bus, in + ((phy_addr & MDIO_ADDR_MASK) << MDIO_ADDR_OFFSET) | + ((phy_reg & MDIO_REG_MASK) << MDIO_REG_OFFSET); + +- while (ltq_etop_r32(LTQ_ETOP_MDIO) & MDIO_REQUEST) ++ while (ltq_etop_r32(LTQ_ETOP_MDIO_ACC) & MDIO_REQUEST) + ; +- ltq_etop_w32(val, LTQ_ETOP_MDIO); +- while (ltq_etop_r32(LTQ_ETOP_MDIO) & MDIO_REQUEST) ++ ltq_etop_w32(val, LTQ_ETOP_MDIO_ACC); ++ while (ltq_etop_r32(LTQ_ETOP_MDIO_ACC) & MDIO_REQUEST) + ; +- val = ltq_etop_r32(LTQ_ETOP_MDIO) & MDIO_VAL_MASK; ++ val = ltq_etop_r32(LTQ_ETOP_MDIO_ACC) & MDIO_VAL_MASK; + return val; + } + +@@ -376,14 +563,18 @@ ltq_etop_mdio_probe(struct net_device *d + { + struct ltq_etop_priv *priv = netdev_priv(dev); + struct phy_device *phydev = NULL; +- int phy_addr; ++ u32 phy_supported = (SUPPORTED_10baseT_Half ++ | SUPPORTED_10baseT_Full ++ | SUPPORTED_100baseT_Half ++ | SUPPORTED_100baseT_Full ++ | SUPPORTED_Autoneg ++ | SUPPORTED_MII ++ | SUPPORTED_TP); + +- for (phy_addr = 0; phy_addr < PHY_MAX_ADDR; phy_addr++) { +- if (priv->mii_bus->phy_map[phy_addr]) { +- phydev = priv->mii_bus->phy_map[phy_addr]; +- break; +- } +- } ++ if (of_machine_is_compatible("lantiq,ase")) ++ phydev = priv->mii_bus->phy_map[8]; ++ else ++ phydev = priv->mii_bus->phy_map[0]; + + if (!phydev) { + netdev_err(dev, "no PHY found\n"); +@@ -391,21 +582,18 @@ ltq_etop_mdio_probe(struct net_device *d + } + + phydev = phy_connect(dev, dev_name(&phydev->dev), +- <q_etop_mdio_link, priv->pldata->mii_mode); ++ <q_etop_mdio_link, priv->mii_mode); + + if (IS_ERR(phydev)) { + netdev_err(dev, "Could not attach to PHY\n"); + return PTR_ERR(phydev); + } + +- phydev->supported &= (SUPPORTED_10baseT_Half +- | SUPPORTED_10baseT_Full +- | SUPPORTED_100baseT_Half +- | SUPPORTED_100baseT_Full +- | SUPPORTED_Autoneg +- | SUPPORTED_MII +- | SUPPORTED_TP); ++ if (of_machine_is_compatible("lantiq,ar9")) ++ phy_supported |= SUPPORTED_1000baseT_Half ++ | SUPPORTED_1000baseT_Full; + ++ phydev->supported &= phy_supported; + phydev->advertising = phydev->supported; + priv->phydev = phydev; + pr_info("%s: attached PHY [%s] (phy_addr=%s, irq=%d)\n", +@@ -430,8 +618,13 @@ ltq_etop_mdio_init(struct net_device *de + } + + priv->mii_bus->priv = dev; +- priv->mii_bus->read = ltq_etop_mdio_rd; +- priv->mii_bus->write = ltq_etop_mdio_wr; ++ if (of_machine_is_compatible("lantiq,ar9")) { ++ priv->mii_bus->read = ltq_etop_mdio_rd_xr9; ++ priv->mii_bus->write = ltq_etop_mdio_wr_xr9; ++ } else { ++ priv->mii_bus->read = ltq_etop_mdio_rd; ++ priv->mii_bus->write = ltq_etop_mdio_wr; ++ } + priv->mii_bus->name = "ltq_mii"; + snprintf(priv->mii_bus->id, MII_BUS_ID_SIZE, "%s-%x", + priv->pdev->name, priv->pdev->id); +@@ -480,17 +673,19 @@ static int + ltq_etop_open(struct net_device *dev) + { + struct ltq_etop_priv *priv = netdev_priv(dev); +- int i; ++ unsigned long flags; + +- for (i = 0; i < MAX_DMA_CHAN; i++) { +- struct ltq_etop_chan *ch = &priv->ch[i]; ++ napi_enable(&priv->txch.napi); ++ napi_enable(&priv->rxch.napi); ++ ++ spin_lock_irqsave(&priv->lock, flags); ++ ltq_dma_open(&priv->txch.dma); ++ ltq_dma_open(&priv->rxch.dma); ++ spin_unlock_irqrestore(&priv->lock, flags); ++ ++ if (priv->phydev) ++ phy_start(priv->phydev); + +- if (!IS_TX(i) && (!IS_RX(i))) +- continue; +- ltq_dma_open(&ch->dma); +- napi_enable(&ch->napi); +- } +- phy_start(priv->phydev); + netif_tx_start_all_queues(dev); + return 0; + } +@@ -499,18 +694,19 @@ static int + ltq_etop_stop(struct net_device *dev) + { + struct ltq_etop_priv *priv = netdev_priv(dev); +- int i; ++ unsigned long flags; + + netif_tx_stop_all_queues(dev); +- phy_stop(priv->phydev); +- for (i = 0; i < MAX_DMA_CHAN; i++) { +- struct ltq_etop_chan *ch = &priv->ch[i]; +- +- if (!IS_RX(i) && !IS_TX(i)) +- continue; +- napi_disable(&ch->napi); +- ltq_dma_close(&ch->dma); +- } ++ if (priv->phydev) ++ phy_stop(priv->phydev); ++ napi_disable(&priv->txch.napi); ++ napi_disable(&priv->rxch.napi); ++ ++ spin_lock_irqsave(&priv->lock, flags); ++ ltq_dma_close(&priv->txch.dma); ++ ltq_dma_close(&priv->rxch.dma); ++ spin_unlock_irqrestore(&priv->lock, flags); ++ + return 0; + } + +@@ -520,16 +716,16 @@ ltq_etop_tx(struct sk_buff *skb, struct + int queue = skb_get_queue_mapping(skb); + struct netdev_queue *txq = netdev_get_tx_queue(dev, queue); + struct ltq_etop_priv *priv = netdev_priv(dev); +- struct ltq_etop_chan *ch = &priv->ch[(queue << 1) | 1]; +- struct ltq_dma_desc *desc = &ch->dma.desc_base[ch->dma.desc]; +- int len; ++ struct ltq_dma_desc *desc = ++ &priv->txch.dma.desc_base[priv->txch.dma.desc]; + unsigned long flags; + u32 byte_offset; ++ int len; + + len = skb->len < ETH_ZLEN ? ETH_ZLEN : skb->len; + +- if ((desc->ctl & (LTQ_DMA_OWN | LTQ_DMA_C)) || ch->skb[ch->dma.desc]) { +- dev_kfree_skb_any(skb); ++ if ((desc->ctl & (LTQ_DMA_OWN | LTQ_DMA_C)) || ++ priv->txch.skb[priv->txch.dma.desc]) { + netdev_err(dev, "tx ring full\n"); + netif_tx_stop_queue(txq); + return NETDEV_TX_BUSY; +@@ -537,7 +733,7 @@ ltq_etop_tx(struct sk_buff *skb, struct + + /* dma needs to start on a 16 byte aligned address */ + byte_offset = CPHYSADDR(skb->data) % 16; +- ch->skb[ch->dma.desc] = skb; ++ priv->txch.skb[priv->txch.dma.desc] = skb; + + dev->trans_start = jiffies; + +@@ -547,11 +743,11 @@ ltq_etop_tx(struct sk_buff *skb, struct + wmb(); + desc->ctl = LTQ_DMA_OWN | LTQ_DMA_SOP | LTQ_DMA_EOP | + LTQ_DMA_TX_OFFSET(byte_offset) | (len & LTQ_DMA_SIZE_MASK); +- ch->dma.desc++; +- ch->dma.desc %= LTQ_DESC_NUM; ++ priv->txch.dma.desc++; ++ priv->txch.dma.desc %= LTQ_DESC_NUM; + spin_unlock_irqrestore(&priv->lock, flags); + +- if (ch->dma.desc_base[ch->dma.desc].ctl & LTQ_DMA_OWN) ++ if (priv->txch.dma.desc_base[priv->txch.dma.desc].ctl & LTQ_DMA_OWN) + netif_tx_stop_queue(txq); + + return NETDEV_TX_OK; +@@ -566,8 +762,10 @@ ltq_etop_change_mtu(struct net_device *d + struct ltq_etop_priv *priv = netdev_priv(dev); + unsigned long flags; + ++ int max = ETH_HLEN + VLAN_HLEN + new_mtu + ETH_FCS_LEN; ++ + spin_lock_irqsave(&priv->lock, flags); +- ltq_etop_w32((ETOP_PLEN_UNDER << 16) | new_mtu, ++ ltq_etop_w32((ETOP_PLEN_UNDER << 16) | max, + LTQ_ETOP_IGPLEN); + spin_unlock_irqrestore(&priv->lock, flags); + } +@@ -638,6 +836,9 @@ ltq_etop_init(struct net_device *dev) + if (err) + goto err_hw; + ltq_etop_change_mtu(dev, 1500); ++ err = ltq_etop_dma_init(dev); ++ if (err) ++ goto err_hw; + + memcpy(&mac, &priv->pldata->mac, sizeof(struct sockaddr)); + if (!is_valid_ether_addr(mac.sa_data)) { +@@ -655,9 +856,10 @@ ltq_etop_init(struct net_device *dev) + dev->addr_assign_type = NET_ADDR_RANDOM; + + ltq_etop_set_multicast_list(dev); +- err = ltq_etop_mdio_init(dev); +- if (err) +- goto err_netdev; ++ if (!ltq_etop_mdio_init(dev)) ++ dev->ethtool_ops = <q_etop_ethtool_ops; ++ else ++ pr_warn("etop: mdio probe failed\n");; + return 0; + + err_netdev: +@@ -677,6 +879,9 @@ ltq_etop_tx_timeout(struct net_device *d + err = ltq_etop_hw_init(dev); + if (err) + goto err_hw; ++ err = ltq_etop_dma_init(dev); ++ if (err) ++ goto err_hw; + dev->trans_start = jiffies; + netif_wake_queue(dev); + return; +@@ -700,14 +905,18 @@ static const struct net_device_ops ltq_e + .ndo_tx_timeout = ltq_etop_tx_timeout, + }; + +-static int __init +-ltq_etop_probe(struct platform_device *pdev) ++static int ltq_etop_probe(struct platform_device *pdev) + { + struct net_device *dev; + struct ltq_etop_priv *priv; +- struct resource *res; ++ struct resource *res, *gbit_res, irqres[2]; + int err; +- int i; ++ ++ err = of_irq_to_resource_table(pdev->dev.of_node, irqres, 2); ++ if (err != 2) { ++ dev_err(&pdev->dev, "failed to get etop irqs\n"); ++ return -EINVAL; ++ } + + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + if (!res) { +@@ -733,30 +942,58 @@ ltq_etop_probe(struct platform_device *p + goto err_out; + } + +- dev = alloc_etherdev_mq(sizeof(struct ltq_etop_priv), 4); +- if (!dev) { +- err = -ENOMEM; +- goto err_out; ++ if (of_machine_is_compatible("lantiq,ar9")) { ++ gbit_res = platform_get_resource(pdev, IORESOURCE_MEM, 1); ++ if (!gbit_res) { ++ dev_err(&pdev->dev, "failed to get gbit resource\n"); ++ err = -ENOENT; ++ goto err_out; ++ } ++ ltq_gbit_membase = devm_ioremap_nocache(&pdev->dev, ++ gbit_res->start, resource_size(gbit_res)); ++ if (!ltq_gbit_membase) { ++ dev_err(&pdev->dev, "failed to remap gigabit switch %d\n", ++ pdev->id); ++ err = -ENOMEM; ++ goto err_out; ++ } + } ++ ++ dev = alloc_etherdev_mq(sizeof(struct ltq_etop_priv), 4); + strcpy(dev->name, "eth%d"); + dev->netdev_ops = <q_eth_netdev_ops; +- dev->ethtool_ops = <q_etop_ethtool_ops; + priv = netdev_priv(dev); + priv->res = res; + priv->pdev = pdev; +- priv->pldata = dev_get_platdata(&pdev->dev); + priv->netdev = dev; ++ priv->tx_irq = irqres[0].start; ++ priv->rx_irq = irqres[1].start; ++ priv->mii_mode = of_get_phy_mode(pdev->dev.of_node); ++ of_get_mac_address_mtd(pdev->dev.of_node, priv->mac); ++ ++ priv->clk_ppe = clk_get(&pdev->dev, NULL); ++ if (IS_ERR(priv->clk_ppe)) ++ return PTR_ERR(priv->clk_ppe); ++ if (of_machine_is_compatible("lantiq,ar9")) { ++ priv->clk_switch = clk_get(&pdev->dev, "switch"); ++ if (IS_ERR(priv->clk_switch)) ++ return PTR_ERR(priv->clk_switch); ++ } ++ if (of_machine_is_compatible("lantiq,ase")) { ++ priv->clk_ephy = clk_get(&pdev->dev, "ephy"); ++ if (IS_ERR(priv->clk_ephy)) ++ return PTR_ERR(priv->clk_ephy); ++ priv->clk_ephycgu = clk_get(&pdev->dev, "ephycgu"); ++ if (IS_ERR(priv->clk_ephycgu)) ++ return PTR_ERR(priv->clk_ephycgu); ++ } ++ + spin_lock_init(&priv->lock); + +- for (i = 0; i < MAX_DMA_CHAN; i++) { +- if (IS_TX(i)) +- netif_napi_add(dev, &priv->ch[i].napi, +- ltq_etop_poll_tx, 8); +- else if (IS_RX(i)) +- netif_napi_add(dev, &priv->ch[i].napi, +- ltq_etop_poll_rx, 32); +- priv->ch[i].netdev = dev; +- } ++ netif_napi_add(dev, &priv->txch.napi, ltq_etop_poll_tx, 8); ++ netif_napi_add(dev, &priv->rxch.napi, ltq_etop_poll_rx, 32); ++ priv->txch.netdev = dev; ++ priv->rxch.netdev = dev; + + err = register_netdev(dev); + if (err) +@@ -785,31 +1022,22 @@ ltq_etop_remove(struct platform_device * + return 0; + } + ++static const struct of_device_id ltq_etop_match[] = { ++ { .compatible = "lantiq,etop-xway" }, ++ {}, ++}; ++MODULE_DEVICE_TABLE(of, ltq_etop_match); ++ + static struct platform_driver ltq_mii_driver = { ++ .probe = ltq_etop_probe, + .remove = ltq_etop_remove, + .driver = { + .name = "ltq_etop", ++ .of_match_table = ltq_etop_match, + }, + }; + +-int __init +-init_ltq_etop(void) +-{ +- int ret = platform_driver_probe(<q_mii_driver, ltq_etop_probe); +- +- if (ret) +- pr_err("ltq_etop: Error registering platform driver!"); +- return ret; +-} +- +-static void __exit +-exit_ltq_etop(void) +-{ +- platform_driver_unregister(<q_mii_driver); +-} +- +-module_init(init_ltq_etop); +-module_exit(exit_ltq_etop); ++module_platform_driver(ltq_mii_driver); + + MODULE_AUTHOR("John Crispin "); + MODULE_DESCRIPTION("Lantiq SoC ETOP"); diff --git a/target/linux/lantiq/patches-4.1/0030-GPIO-add-named-gpio-exports.patch b/target/linux/lantiq/patches-4.1/0030-GPIO-add-named-gpio-exports.patch new file mode 100644 index 0000000000..a72a6dad68 --- /dev/null +++ b/target/linux/lantiq/patches-4.1/0030-GPIO-add-named-gpio-exports.patch @@ -0,0 +1,166 @@ +From cc809a441d8f2924f785eb863dfa6aef47a25b0b Mon Sep 17 00:00:00 2001 +From: John Crispin +Date: Tue, 12 Aug 2014 20:49:27 +0200 +Subject: [PATCH 30/36] GPIO: add named gpio exports + +Signed-off-by: John Crispin +--- + drivers/gpio/gpiolib-of.c | 68 +++++++++++++++++++++++++++++++++++++++++ + drivers/gpio/gpiolib.c | 11 +++++-- + include/asm-generic/gpio.h | 5 +++ + include/linux/gpio/consumer.h | 8 +++++ + 4 files changed, 90 insertions(+), 2 deletions(-) + +--- a/drivers/gpio/gpiolib-of.c ++++ b/drivers/gpio/gpiolib-of.c +@@ -23,6 +23,8 @@ + #include + #include + #include ++#include ++#include + + #include "gpiolib.h" + +@@ -444,3 +446,69 @@ void of_gpiochip_remove(struct gpio_chip + gpiochip_remove_pin_ranges(chip); + of_node_put(chip->of_node); + } ++ ++static struct of_device_id gpio_export_ids[] = { ++ { .compatible = "gpio-export" }, ++ { /* sentinel */ } ++}; ++ ++static int __init of_gpio_export_probe(struct platform_device *pdev) ++{ ++ struct device_node *np = pdev->dev.of_node; ++ struct device_node *cnp; ++ u32 val; ++ int nb = 0; ++ ++ for_each_child_of_node(np, cnp) { ++ const char *name = NULL; ++ int gpio; ++ bool dmc; ++ int max_gpio = 1; ++ int i; ++ ++ of_property_read_string(cnp, "gpio-export,name", &name); ++ ++ if (!name) ++ max_gpio = of_gpio_count(cnp); ++ ++ for (i = 0; i < max_gpio; i++) { ++ unsigned flags = 0; ++ enum of_gpio_flags of_flags; ++ ++ gpio = of_get_gpio_flags(cnp, i, &of_flags); ++ ++ if (of_flags == OF_GPIO_ACTIVE_LOW) ++ flags |= GPIOF_ACTIVE_LOW; ++ ++ if (!of_property_read_u32(cnp, "gpio-export,output", &val)) ++ flags |= val ? GPIOF_OUT_INIT_HIGH : GPIOF_OUT_INIT_LOW; ++ else ++ flags |= GPIOF_IN; ++ ++ if (devm_gpio_request_one(&pdev->dev, gpio, flags, name ? name : of_node_full_name(np))) ++ continue; ++ ++ dmc = of_property_read_bool(cnp, "gpio-export,direction_may_change"); ++ gpio_export_with_name(gpio, dmc, name); ++ nb++; ++ } ++ } ++ ++ dev_info(&pdev->dev, "%d gpio(s) exported\n", nb); ++ ++ return 0; ++} ++ ++static struct platform_driver gpio_export_driver = { ++ .driver = { ++ .name = "gpio-export", ++ .owner = THIS_MODULE, ++ .of_match_table = of_match_ptr(gpio_export_ids), ++ }, ++}; ++ ++static int __init of_gpio_export_init(void) ++{ ++ return platform_driver_probe(&gpio_export_driver, of_gpio_export_probe); ++} ++device_initcall(of_gpio_export_init); +--- a/include/asm-generic/gpio.h ++++ b/include/asm-generic/gpio.h +@@ -122,6 +122,12 @@ static inline int gpio_export(unsigned g + return gpiod_export(gpio_to_desc(gpio), direction_may_change); + } + ++int __gpiod_export(struct gpio_desc *desc, bool direction_may_change, const char *name); ++static inline int gpio_export_with_name(unsigned gpio, bool direction_may_change, const char *name) ++{ ++ return __gpiod_export(gpio_to_desc(gpio), direction_may_change, name); ++} ++ + static inline int gpio_export_link(struct device *dev, const char *name, + unsigned gpio) + { +--- a/include/linux/gpio/consumer.h ++++ b/include/linux/gpio/consumer.h +@@ -446,6 +446,7 @@ static inline int desc_to_gpio(const str + + #if IS_ENABLED(CONFIG_GPIOLIB) && IS_ENABLED(CONFIG_GPIO_SYSFS) + ++int _gpiod_export(struct gpio_desc *desc, bool direction_may_change, const char *name); + int gpiod_export(struct gpio_desc *desc, bool direction_may_change); + int gpiod_export_link(struct device *dev, const char *name, + struct gpio_desc *desc); +@@ -454,6 +455,13 @@ void gpiod_unexport(struct gpio_desc *de + + #else /* CONFIG_GPIOLIB && CONFIG_GPIO_SYSFS */ + ++static inline int _gpiod_export(struct gpio_desc *desc, ++ bool direction_may_change, ++ const char *name) ++{ ++ return -ENOSYS; ++} ++ + static inline int gpiod_export(struct gpio_desc *desc, + bool direction_may_change) + { +--- a/drivers/gpio/gpiolib-sysfs.c ++++ b/drivers/gpio/gpiolib-sysfs.c +@@ -549,7 +549,7 @@ static struct class gpio_class = { + * + * Returns zero on success, else an error. + */ +-int gpiod_export(struct gpio_desc *desc, bool direction_may_change) ++int __gpiod_export(struct gpio_desc *desc, bool direction_may_change, const char *name) + { + struct gpio_chip *chip; + unsigned long flags; +@@ -601,6 +601,8 @@ int gpiod_export(struct gpio_desc *desc, + offset = gpio_chip_hwgpio(desc); + if (desc->chip->names && desc->chip->names[offset]) + ioname = desc->chip->names[offset]; ++ if (name) ++ ioname = name; + + dev = device_create_with_groups(&gpio_class, desc->chip->dev, + MKDEV(0, 0), desc, gpio_groups, +@@ -620,6 +622,12 @@ fail_unlock: + gpiod_dbg(desc, "%s: status %d\n", __func__, status); + return status; + } ++EXPORT_SYMBOL_GPL(__gpiod_export); ++ ++int gpiod_export(struct gpio_desc *desc, bool direction_may_change) ++{ ++ return __gpiod_export(desc, direction_may_change, NULL); ++} + EXPORT_SYMBOL_GPL(gpiod_export); + + static int match_export(struct device *dev, const void *data) diff --git a/target/linux/lantiq/patches-4.1/0031-I2C-MIPS-lantiq-add-FALC-ON-i2c-bus-master.patch b/target/linux/lantiq/patches-4.1/0031-I2C-MIPS-lantiq-add-FALC-ON-i2c-bus-master.patch new file mode 100644 index 0000000000..164c9476a4 --- /dev/null +++ b/target/linux/lantiq/patches-4.1/0031-I2C-MIPS-lantiq-add-FALC-ON-i2c-bus-master.patch @@ -0,0 +1,1034 @@ +From f17e50f67fa3c77624edf2ca03fae0d50f0ce39b Mon Sep 17 00:00:00 2001 +From: John Crispin +Date: Thu, 7 Aug 2014 18:26:42 +0200 +Subject: [PATCH 31/36] I2C: MIPS: lantiq: add FALC-ON i2c bus master + +This patch adds the driver needed to make the I2C bus work on FALC-ON SoCs. + +Signed-off-by: Thomas Langer +Signed-off-by: John Crispin +--- + drivers/i2c/busses/Kconfig | 10 + + drivers/i2c/busses/Makefile | 1 + + drivers/i2c/busses/i2c-lantiq.c | 747 +++++++++++++++++++++++++++++++++++++++ + drivers/i2c/busses/i2c-lantiq.h | 234 ++++++++++++ + 4 files changed, 992 insertions(+) + create mode 100644 drivers/i2c/busses/i2c-lantiq.c + create mode 100644 drivers/i2c/busses/i2c-lantiq.h + +--- a/drivers/i2c/busses/Kconfig ++++ b/drivers/i2c/busses/Kconfig +@@ -609,6 +609,16 @@ config I2C_MESON + If you say yes to this option, support will be included for the + I2C interface on the Amlogic Meson family of SoCs. + ++config I2C_LANTIQ ++ tristate "Lantiq I2C interface" ++ depends on LANTIQ && SOC_FALCON ++ help ++ If you say yes to this option, support will be included for the ++ Lantiq I2C core. ++ ++ This driver can also be built as a module. If so, the module ++ will be called i2c-lantiq. ++ + config I2C_MPC + tristate "MPC107/824x/85xx/512x/52xx/83xx/86xx" + depends on PPC +--- a/drivers/i2c/busses/Makefile ++++ b/drivers/i2c/busses/Makefile +@@ -58,6 +58,7 @@ obj-$(CONFIG_I2C_IMX) += i2c-imx.o + obj-$(CONFIG_I2C_IOP3XX) += i2c-iop3xx.o + obj-$(CONFIG_I2C_JZ4780) += i2c-jz4780.o + obj-$(CONFIG_I2C_KEMPLD) += i2c-kempld.o ++obj-$(CONFIG_I2C_LANTIQ) += i2c-lantiq.o + obj-$(CONFIG_I2C_MESON) += i2c-meson.o + obj-$(CONFIG_I2C_MPC) += i2c-mpc.o + obj-$(CONFIG_I2C_MV64XXX) += i2c-mv64xxx.o +--- /dev/null ++++ b/drivers/i2c/busses/i2c-lantiq.c +@@ -0,0 +1,747 @@ ++ ++/* ++ * Lantiq I2C bus adapter ++ * ++ * Parts based on i2c-designware.c and other i2c drivers from Linux 2.6.33 ++ * ++ * This program is free software; you can redistribute it and/or modify ++ * it under the terms of the GNU General Public License as published by ++ * the Free Software Foundation; either version 2 of the License, or ++ * (at your option) any later version. ++ * ++ * This program is distributed in the hope that it will be useful, ++ * but WITHOUT ANY WARRANTY; without even the implied warranty of ++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the ++ * GNU General Public License for more details. ++ * ++ * You should have received a copy of the GNU General Public License ++ * along with this program; if not, write to the Free Software ++ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. ++ * ++ * Copyright (C) 2012 Thomas Langer ++ */ ++ ++#include ++#include ++#include ++#include /* for kzalloc, kfree */ ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++ ++#include ++#include "i2c-lantiq.h" ++ ++/* ++ * CURRENT ISSUES: ++ * - no high speed support ++ * - ten bit mode is not tested (no slave devices) ++ */ ++ ++/* access macros */ ++#define i2c_r32(reg) \ ++ __raw_readl(&(priv->membase)->reg) ++#define i2c_w32(val, reg) \ ++ __raw_writel(val, &(priv->membase)->reg) ++#define i2c_w32_mask(clear, set, reg) \ ++ i2c_w32((i2c_r32(reg) & ~(clear)) | (set), reg) ++ ++#define DRV_NAME "i2c-lantiq" ++#define DRV_VERSION "1.00" ++ ++#define LTQ_I2C_BUSY_TIMEOUT 20 /* ms */ ++ ++#ifdef DEBUG ++#define LTQ_I2C_XFER_TIMEOUT (25*HZ) ++#else ++#define LTQ_I2C_XFER_TIMEOUT HZ ++#endif ++ ++#define LTQ_I2C_IMSC_DEFAULT_MASK (I2C_IMSC_I2C_P_INT_EN | \ ++ I2C_IMSC_I2C_ERR_INT_EN) ++ ++#define LTQ_I2C_ARB_LOST (1 << 0) ++#define LTQ_I2C_NACK (1 << 1) ++#define LTQ_I2C_RX_UFL (1 << 2) ++#define LTQ_I2C_RX_OFL (1 << 3) ++#define LTQ_I2C_TX_UFL (1 << 4) ++#define LTQ_I2C_TX_OFL (1 << 5) ++ ++struct ltq_i2c { ++ struct mutex mutex; ++ ++ ++ /* active clock settings */ ++ unsigned int input_clock; /* clock input for i2c hardware block */ ++ unsigned int i2c_clock; /* approximated bus clock in kHz */ ++ ++ struct clk *clk_gate; ++ struct clk *clk_input; ++ ++ ++ /* resources (memory and interrupts) */ ++ int irq_lb; /* last burst irq */ ++ ++ struct lantiq_reg_i2c __iomem *membase; /* base of mapped registers */ ++ ++ struct i2c_adapter adap; ++ struct device *dev; ++ ++ struct completion cmd_complete; ++ ++ ++ /* message transfer data */ ++ struct i2c_msg *current_msg; /* current message */ ++ int msgs_num; /* number of messages to handle */ ++ u8 *msg_buf; /* current buffer */ ++ u32 msg_buf_len; /* remaining length of current buffer */ ++ int msg_err; /* error status of the current transfer */ ++ ++ ++ /* master status codes */ ++ enum { ++ STATUS_IDLE, ++ STATUS_ADDR, /* address phase */ ++ STATUS_WRITE, ++ STATUS_READ, ++ STATUS_READ_END, ++ STATUS_STOP ++ } status; ++}; ++ ++static irqreturn_t ltq_i2c_isr(int irq, void *dev_id); ++ ++static inline void enable_burst_irq(struct ltq_i2c *priv) ++{ ++ i2c_w32_mask(0, I2C_IMSC_LBREQ_INT_EN | I2C_IMSC_BREQ_INT_EN, imsc); ++} ++static inline void disable_burst_irq(struct ltq_i2c *priv) ++{ ++ i2c_w32_mask(I2C_IMSC_LBREQ_INT_EN | I2C_IMSC_BREQ_INT_EN, 0, imsc); ++} ++ ++static void prepare_msg_send_addr(struct ltq_i2c *priv) ++{ ++ struct i2c_msg *msg = priv->current_msg; ++ int rd = !!(msg->flags & I2C_M_RD); /* extends to 0 or 1 */ ++ u16 addr = msg->addr; ++ ++ /* new i2c_msg */ ++ priv->msg_buf = msg->buf; ++ priv->msg_buf_len = msg->len; ++ if (rd) ++ priv->status = STATUS_READ; ++ else ++ priv->status = STATUS_WRITE; ++ ++ /* send slave address */ ++ if (msg->flags & I2C_M_TEN) { ++ i2c_w32(0xf0 | ((addr & 0x300) >> 7) | rd, txd); ++ i2c_w32(addr & 0xff, txd); ++ } else { ++ i2c_w32((addr & 0x7f) << 1 | rd, txd); ++ } ++} ++ ++static void ltq_i2c_set_tx_len(struct ltq_i2c *priv) ++{ ++ struct i2c_msg *msg = priv->current_msg; ++ int len = (msg->flags & I2C_M_TEN) ? 2 : 1; ++ ++ pr_debug("set_tx_len %cX\n", (msg->flags & I2C_M_RD) ? 'R' : 'T'); ++ ++ priv->status = STATUS_ADDR; ++ ++ if (!(msg->flags & I2C_M_RD)) ++ len += msg->len; ++ else ++ /* set maximum received packet size (before rx int!) */ ++ i2c_w32(msg->len, mrps_ctrl); ++ i2c_w32(len, tps_ctrl); ++ enable_burst_irq(priv); ++} ++ ++static int ltq_i2c_hw_set_clock(struct i2c_adapter *adap) ++{ ++ struct ltq_i2c *priv = i2c_get_adapdata(adap); ++ unsigned int input_clock = clk_get_rate(priv->clk_input); ++ u32 dec, inc = 1; ++ ++ /* clock changed? */ ++ if (priv->input_clock == input_clock) ++ return 0; ++ ++ /* ++ * this formula is only an approximation, found by the recommended ++ * values in the "I2C Architecture Specification 1.7.1" ++ */ ++ dec = input_clock / (priv->i2c_clock * 2); ++ if (dec <= 6) ++ return -ENXIO; ++ ++ i2c_w32(0, fdiv_high_cfg); ++ i2c_w32((inc << I2C_FDIV_CFG_INC_OFFSET) | ++ (dec << I2C_FDIV_CFG_DEC_OFFSET), ++ fdiv_cfg); ++ ++ dev_info(priv->dev, "setup clocks (in %d kHz, bus %d kHz, dec=%d)\n", ++ input_clock, priv->i2c_clock, dec); ++ ++ priv->input_clock = input_clock; ++ return 0; ++} ++ ++static int ltq_i2c_hw_init(struct i2c_adapter *adap) ++{ ++ int ret = 0; ++ struct ltq_i2c *priv = i2c_get_adapdata(adap); ++ ++ /* disable bus */ ++ i2c_w32_mask(I2C_RUN_CTRL_RUN_EN, 0, run_ctrl); ++ ++#ifndef DEBUG ++ /* set normal operation clock divider */ ++ i2c_w32(1 << I2C_CLC_RMC_OFFSET, clc); ++#else ++ /* for debugging a higher divider value! */ ++ i2c_w32(0xF0 << I2C_CLC_RMC_OFFSET, clc); ++#endif ++ ++ /* setup clock */ ++ ret = ltq_i2c_hw_set_clock(adap); ++ if (ret != 0) { ++ dev_warn(priv->dev, "invalid clock settings\n"); ++ return ret; ++ } ++ ++ /* configure fifo */ ++ i2c_w32(I2C_FIFO_CFG_TXFC | /* tx fifo as flow controller */ ++ I2C_FIFO_CFG_RXFC | /* rx fifo as flow controller */ ++ I2C_FIFO_CFG_TXFA_TXFA2 | /* tx fifo 4-byte aligned */ ++ I2C_FIFO_CFG_RXFA_RXFA2 | /* rx fifo 4-byte aligned */ ++ I2C_FIFO_CFG_TXBS_TXBS0 | /* tx fifo burst size is 1 word */ ++ I2C_FIFO_CFG_RXBS_RXBS0, /* rx fifo burst size is 1 word */ ++ fifo_cfg); ++ ++ /* configure address */ ++ i2c_w32(I2C_ADDR_CFG_SOPE_EN | /* generate stop when no more data in ++ the fifo */ ++ I2C_ADDR_CFG_SONA_EN | /* generate stop when NA received */ ++ I2C_ADDR_CFG_MnS_EN | /* we are master device */ ++ 0, /* our slave address (not used!) */ ++ addr_cfg); ++ ++ /* enable bus */ ++ i2c_w32_mask(0, I2C_RUN_CTRL_RUN_EN, run_ctrl); ++ ++ return 0; ++} ++ ++static int ltq_i2c_wait_bus_not_busy(struct ltq_i2c *priv) ++{ ++ unsigned long timeout; ++ ++ timeout = jiffies + msecs_to_jiffies(LTQ_I2C_BUSY_TIMEOUT); ++ ++ do { ++ u32 stat = i2c_r32(bus_stat); ++ ++ if ((stat & I2C_BUS_STAT_BS_MASK) == I2C_BUS_STAT_BS_FREE) ++ return 0; ++ ++ cond_resched(); ++ } while (!time_after_eq(jiffies, timeout)); ++ ++ dev_err(priv->dev, "timeout waiting for bus ready\n"); ++ return -ETIMEDOUT; ++} ++ ++static void ltq_i2c_tx(struct ltq_i2c *priv, int last) ++{ ++ if (priv->msg_buf_len && priv->msg_buf) { ++ i2c_w32(*priv->msg_buf, txd); ++ ++ if (--priv->msg_buf_len) ++ priv->msg_buf++; ++ else ++ priv->msg_buf = NULL; ++ } else { ++ last = 1; ++ } ++ ++ if (last) ++ disable_burst_irq(priv); ++} ++ ++static void ltq_i2c_rx(struct ltq_i2c *priv, int last) ++{ ++ u32 fifo_stat, timeout; ++ if (priv->msg_buf_len && priv->msg_buf) { ++ timeout = 5000000; ++ do { ++ fifo_stat = i2c_r32(ffs_stat); ++ } while (!fifo_stat && --timeout); ++ if (!timeout) { ++ last = 1; ++ pr_debug("\nrx timeout\n"); ++ goto err; ++ } ++ while (fifo_stat) { ++ *priv->msg_buf = i2c_r32(rxd); ++ if (--priv->msg_buf_len) { ++ priv->msg_buf++; ++ } else { ++ priv->msg_buf = NULL; ++ last = 1; ++ break; ++ } ++ /* ++ * do not read more than burst size, otherwise no "last ++ * burst" is generated and the transaction is blocked! ++ */ ++ fifo_stat = 0; ++ } ++ } else { ++ last = 1; ++ } ++err: ++ if (last) { ++ disable_burst_irq(priv); ++ ++ if (priv->status == STATUS_READ_END) { ++ /* ++ * do the STATUS_STOP and complete() here, as sometimes ++ * the tx_end is already seen before this is finished ++ */ ++ priv->status = STATUS_STOP; ++ complete(&priv->cmd_complete); ++ } else { ++ i2c_w32(I2C_ENDD_CTRL_SETEND, endd_ctrl); ++ priv->status = STATUS_READ_END; ++ } ++ } ++} ++ ++static void ltq_i2c_xfer_init(struct ltq_i2c *priv) ++{ ++ /* enable interrupts */ ++ i2c_w32(LTQ_I2C_IMSC_DEFAULT_MASK, imsc); ++ ++ /* trigger transfer of first msg */ ++ ltq_i2c_set_tx_len(priv); ++} ++ ++static void dump_msgs(struct i2c_msg msgs[], int num, int rx) ++{ ++#if defined(DEBUG) ++ int i, j; ++ pr_debug("Messages %d %s\n", num, rx ? "out" : "in"); ++ for (i = 0; i < num; i++) { ++ pr_debug("%2d %cX Msg(%d) addr=0x%X: ", i, ++ (msgs[i].flags & I2C_M_RD) ? 'R' : 'T', ++ msgs[i].len, msgs[i].addr); ++ if (!(msgs[i].flags & I2C_M_RD) || rx) { ++ for (j = 0; j < msgs[i].len; j++) ++ pr_debug("%02X ", msgs[i].buf[j]); ++ } ++ pr_debug("\n"); ++ } ++#endif ++} ++ ++static void ltq_i2c_release_bus(struct ltq_i2c *priv) ++{ ++ if ((i2c_r32(bus_stat) & I2C_BUS_STAT_BS_MASK) == I2C_BUS_STAT_BS_BM) ++ i2c_w32(I2C_ENDD_CTRL_SETEND, endd_ctrl); ++} ++ ++static int ltq_i2c_xfer(struct i2c_adapter *adap, struct i2c_msg msgs[], ++ int num) ++{ ++ struct ltq_i2c *priv = i2c_get_adapdata(adap); ++ int ret; ++ ++ dev_dbg(priv->dev, "xfer %u messages\n", num); ++ dump_msgs(msgs, num, 0); ++ ++ mutex_lock(&priv->mutex); ++ ++ init_completion(&priv->cmd_complete); ++ priv->current_msg = msgs; ++ priv->msgs_num = num; ++ priv->msg_err = 0; ++ priv->status = STATUS_IDLE; ++ ++ /* wait for the bus to become ready */ ++ ret = ltq_i2c_wait_bus_not_busy(priv); ++ if (ret) ++ goto done; ++ ++ while (priv->msgs_num) { ++ /* start the transfers */ ++ ltq_i2c_xfer_init(priv); ++ ++ /* wait for transfers to complete */ ++ ret = wait_for_completion_interruptible_timeout( ++ &priv->cmd_complete, LTQ_I2C_XFER_TIMEOUT); ++ if (ret == 0) { ++ dev_err(priv->dev, "controller timed out\n"); ++ ltq_i2c_hw_init(adap); ++ ret = -ETIMEDOUT; ++ goto done; ++ } else if (ret < 0) ++ goto done; ++ ++ if (priv->msg_err) { ++ if (priv->msg_err & LTQ_I2C_NACK) ++ ret = -ENXIO; ++ else ++ ret = -EREMOTEIO; ++ goto done; ++ } ++ if (--priv->msgs_num) ++ priv->current_msg++; ++ } ++ /* no error? */ ++ ret = num; ++ ++done: ++ ltq_i2c_release_bus(priv); ++ ++ mutex_unlock(&priv->mutex); ++ ++ if (ret >= 0) ++ dump_msgs(msgs, num, 1); ++ ++ pr_debug("XFER ret %d\n", ret); ++ return ret; ++} ++ ++static irqreturn_t ltq_i2c_isr_burst(int irq, void *dev_id) ++{ ++ struct ltq_i2c *priv = dev_id; ++ struct i2c_msg *msg = priv->current_msg; ++ int last = (irq == priv->irq_lb); ++ ++ if (last) ++ pr_debug("LB "); ++ else ++ pr_debug("B "); ++ ++ if (msg->flags & I2C_M_RD) { ++ switch (priv->status) { ++ case STATUS_ADDR: ++ pr_debug("X"); ++ prepare_msg_send_addr(priv); ++ disable_burst_irq(priv); ++ break; ++ case STATUS_READ: ++ case STATUS_READ_END: ++ pr_debug("R"); ++ ltq_i2c_rx(priv, last); ++ break; ++ default: ++ disable_burst_irq(priv); ++ pr_warn("Status R %d\n", priv->status); ++ break; ++ } ++ } else { ++ switch (priv->status) { ++ case STATUS_ADDR: ++ pr_debug("x"); ++ prepare_msg_send_addr(priv); ++ break; ++ case STATUS_WRITE: ++ pr_debug("w"); ++ ltq_i2c_tx(priv, last); ++ break; ++ default: ++ disable_burst_irq(priv); ++ pr_warn("Status W %d\n", priv->status); ++ break; ++ } ++ } ++ ++ i2c_w32(I2C_ICR_BREQ_INT_CLR | I2C_ICR_LBREQ_INT_CLR, icr); ++ return IRQ_HANDLED; ++} ++ ++static void ltq_i2c_isr_prot(struct ltq_i2c *priv) ++{ ++ u32 i_pro = i2c_r32(p_irqss); ++ ++ pr_debug("i2c-p"); ++ ++ /* not acknowledge */ ++ if (i_pro & I2C_P_IRQSS_NACK) { ++ priv->msg_err |= LTQ_I2C_NACK; ++ pr_debug(" nack"); ++ } ++ ++ /* arbitration lost */ ++ if (i_pro & I2C_P_IRQSS_AL) { ++ priv->msg_err |= LTQ_I2C_ARB_LOST; ++ pr_debug(" arb-lost"); ++ } ++ /* tx -> rx switch */ ++ if (i_pro & I2C_P_IRQSS_RX) ++ pr_debug(" rx"); ++ ++ /* tx end */ ++ if (i_pro & I2C_P_IRQSS_TX_END) ++ pr_debug(" txend"); ++ pr_debug("\n"); ++ ++ if (!priv->msg_err) { ++ /* tx -> rx switch */ ++ if (i_pro & I2C_P_IRQSS_RX) { ++ priv->status = STATUS_READ; ++ enable_burst_irq(priv); ++ } ++ if (i_pro & I2C_P_IRQSS_TX_END) { ++ if (priv->status == STATUS_READ) ++ priv->status = STATUS_READ_END; ++ else { ++ disable_burst_irq(priv); ++ priv->status = STATUS_STOP; ++ } ++ } ++ } ++ ++ i2c_w32(i_pro, p_irqsc); ++} ++ ++static irqreturn_t ltq_i2c_isr(int irq, void *dev_id) ++{ ++ u32 i_raw, i_err = 0; ++ struct ltq_i2c *priv = dev_id; ++ ++ i_raw = i2c_r32(mis); ++ pr_debug("i_raw 0x%08X\n", i_raw); ++ ++ /* error interrupt */ ++ if (i_raw & I2C_RIS_I2C_ERR_INT_INTOCC) { ++ i_err = i2c_r32(err_irqss); ++ pr_debug("i_err 0x%08X bus_stat 0x%04X\n", ++ i_err, i2c_r32(bus_stat)); ++ ++ /* tx fifo overflow (8) */ ++ if (i_err & I2C_ERR_IRQSS_TXF_OFL) ++ priv->msg_err |= LTQ_I2C_TX_OFL; ++ ++ /* tx fifo underflow (4) */ ++ if (i_err & I2C_ERR_IRQSS_TXF_UFL) ++ priv->msg_err |= LTQ_I2C_TX_UFL; ++ ++ /* rx fifo overflow (2) */ ++ if (i_err & I2C_ERR_IRQSS_RXF_OFL) ++ priv->msg_err |= LTQ_I2C_RX_OFL; ++ ++ /* rx fifo underflow (1) */ ++ if (i_err & I2C_ERR_IRQSS_RXF_UFL) ++ priv->msg_err |= LTQ_I2C_RX_UFL; ++ ++ i2c_w32(i_err, err_irqsc); ++ } ++ ++ /* protocol interrupt */ ++ if (i_raw & I2C_RIS_I2C_P_INT_INTOCC) ++ ltq_i2c_isr_prot(priv); ++ ++ if ((priv->msg_err) || (priv->status == STATUS_STOP)) ++ complete(&priv->cmd_complete); ++ ++ return IRQ_HANDLED; ++} ++ ++static u32 ltq_i2c_functionality(struct i2c_adapter *adap) ++{ ++ return I2C_FUNC_I2C | ++ I2C_FUNC_10BIT_ADDR | ++ I2C_FUNC_SMBUS_EMUL; ++} ++ ++static struct i2c_algorithm ltq_i2c_algorithm = { ++ .master_xfer = ltq_i2c_xfer, ++ .functionality = ltq_i2c_functionality, ++}; ++ ++static int __devinit ltq_i2c_probe(struct platform_device *pdev) ++{ ++ struct device_node *node = pdev->dev.of_node; ++ struct ltq_i2c *priv; ++ struct i2c_adapter *adap; ++ struct resource *mmres, irqres[4]; ++ int ret = 0; ++ ++ dev_dbg(&pdev->dev, "probing\n"); ++ ++ mmres = platform_get_resource(pdev, IORESOURCE_MEM, 0); ++ ret = of_irq_to_resource_table(node, irqres, 4); ++ if (!mmres || (ret != 4)) { ++ dev_err(&pdev->dev, "no resources\n"); ++ return -ENODEV; ++ } ++ ++ /* allocate private data */ ++ priv = devm_kzalloc(&pdev->dev, sizeof(*priv), GFP_KERNEL); ++ if (!priv) { ++ dev_err(&pdev->dev, "can't allocate private data\n"); ++ return -ENOMEM; ++ } ++ ++ adap = &priv->adap; ++ i2c_set_adapdata(adap, priv); ++ adap->owner = THIS_MODULE; ++ adap->class = I2C_CLASS_HWMON | I2C_CLASS_SPD; ++ strlcpy(adap->name, DRV_NAME "-adapter", sizeof(adap->name)); ++ adap->algo = <q_i2c_algorithm; ++ ++ if (of_property_read_u32(node, "clock-frequency", &priv->i2c_clock)) { ++ dev_warn(&pdev->dev, "No I2C speed selected, using 100kHz\n"); ++ priv->i2c_clock = 100000; ++ } ++ ++ init_completion(&priv->cmd_complete); ++ mutex_init(&priv->mutex); ++ ++ priv->membase = devm_request_and_ioremap(&pdev->dev, mmres); ++ if (priv->membase == NULL) ++ return -ENOMEM; ++ ++ priv->dev = &pdev->dev; ++ priv->irq_lb = irqres[0].start; ++ ++ ret = devm_request_irq(&pdev->dev, irqres[0].start, ltq_i2c_isr_burst, ++ IRQF_DISABLED, "i2c lb", priv); ++ if (ret) { ++ dev_err(&pdev->dev, "can't get last burst IRQ %d\n", ++ irqres[0].start); ++ return -ENODEV; ++ } ++ ++ ret = devm_request_irq(&pdev->dev, irqres[1].start, ltq_i2c_isr_burst, ++ IRQF_DISABLED, "i2c b", priv); ++ if (ret) { ++ dev_err(&pdev->dev, "can't get burst IRQ %d\n", ++ irqres[1].start); ++ return -ENODEV; ++ } ++ ++ ret = devm_request_irq(&pdev->dev, irqres[2].start, ltq_i2c_isr, ++ IRQF_DISABLED, "i2c err", priv); ++ if (ret) { ++ dev_err(&pdev->dev, "can't get error IRQ %d\n", ++ irqres[2].start); ++ return -ENODEV; ++ } ++ ++ ret = devm_request_irq(&pdev->dev, irqres[3].start, ltq_i2c_isr, ++ IRQF_DISABLED, "i2c p", priv); ++ if (ret) { ++ dev_err(&pdev->dev, "can't get protocol IRQ %d\n", ++ irqres[3].start); ++ return -ENODEV; ++ } ++ ++ dev_dbg(&pdev->dev, "mapped io-space to %p\n", priv->membase); ++ dev_dbg(&pdev->dev, "use IRQs %d, %d, %d, %d\n", irqres[0].start, ++ irqres[1].start, irqres[2].start, irqres[3].start); ++ ++ priv->clk_gate = devm_clk_get(&pdev->dev, NULL); ++ if (IS_ERR(priv->clk_gate)) { ++ dev_err(&pdev->dev, "failed to get i2c clk\n"); ++ return -ENOENT; ++ } ++ ++ /* this is a static clock, which has no refcounting */ ++ priv->clk_input = clk_get_fpi(); ++ if (IS_ERR(priv->clk_input)) { ++ dev_err(&pdev->dev, "failed to get fpi clk\n"); ++ return -ENOENT; ++ } ++ ++ clk_activate(priv->clk_gate); ++ ++ /* add our adapter to the i2c stack */ ++ ret = i2c_add_numbered_adapter(adap); ++ if (ret) { ++ dev_err(&pdev->dev, "can't register I2C adapter\n"); ++ goto out; ++ } ++ ++ platform_set_drvdata(pdev, priv); ++ i2c_set_adapdata(adap, priv); ++ ++ /* print module version information */ ++ dev_dbg(&pdev->dev, "module id=%u revision=%u\n", ++ (i2c_r32(id) & I2C_ID_ID_MASK) >> I2C_ID_ID_OFFSET, ++ (i2c_r32(id) & I2C_ID_REV_MASK) >> I2C_ID_REV_OFFSET); ++ ++ /* initialize HW */ ++ ret = ltq_i2c_hw_init(adap); ++ if (ret) { ++ dev_err(&pdev->dev, "can't configure adapter\n"); ++ i2c_del_adapter(adap); ++ platform_set_drvdata(pdev, NULL); ++ } else { ++ dev_info(&pdev->dev, "version %s\n", DRV_VERSION); ++ } ++ ++ of_i2c_register_devices(adap); ++ ++out: ++ /* if init failed, we need to deactivate the clock gate */ ++ if (ret) ++ clk_deactivate(priv->clk_gate); ++ ++ return ret; ++} ++ ++static int __devexit ltq_i2c_remove(struct platform_device *pdev) ++{ ++ struct ltq_i2c *priv = platform_get_drvdata(pdev); ++ ++ /* disable bus */ ++ i2c_w32_mask(I2C_RUN_CTRL_RUN_EN, 0, run_ctrl); ++ ++ /* power down the core */ ++ clk_deactivate(priv->clk_gate); ++ ++ /* remove driver */ ++ i2c_del_adapter(&priv->adap); ++ kfree(priv); ++ ++ dev_dbg(&pdev->dev, "removed\n"); ++ platform_set_drvdata(pdev, NULL); ++ ++ return 0; ++} ++static const struct of_device_id ltq_i2c_match[] = { ++ { .compatible = "lantiq,lantiq-i2c" }, ++ {}, ++}; ++MODULE_DEVICE_TABLE(of, ltq_i2c_match); ++ ++static struct platform_driver ltq_i2c_driver = { ++ .probe = ltq_i2c_probe, ++ .remove = __devexit_p(ltq_i2c_remove), ++ .driver = { ++ .name = DRV_NAME, ++ .owner = THIS_MODULE, ++ .of_match_table = ltq_i2c_match, ++ }, ++}; ++ ++module_platform_driver(ltq_i2c_driver); ++ ++MODULE_DESCRIPTION("Lantiq I2C bus adapter"); ++MODULE_AUTHOR("Thomas Langer "); ++MODULE_ALIAS("platform:" DRV_NAME); ++MODULE_LICENSE("GPL"); ++MODULE_VERSION(DRV_VERSION); +--- /dev/null ++++ b/drivers/i2c/busses/i2c-lantiq.h +@@ -0,0 +1,234 @@ ++#ifndef I2C_LANTIQ_H ++#define I2C_LANTIQ_H ++ ++/* I2C register structure */ ++struct lantiq_reg_i2c { ++ /* I2C Kernel Clock Control Register */ ++ unsigned int clc; /* 0x00000000 */ ++ /* Reserved */ ++ unsigned int res_0; /* 0x00000004 */ ++ /* I2C Identification Register */ ++ unsigned int id; /* 0x00000008 */ ++ /* Reserved */ ++ unsigned int res_1; /* 0x0000000C */ ++ /* ++ * I2C RUN Control Register ++ * This register enables and disables the I2C peripheral. Before ++ * enabling, the I2C has to be configured properly. After enabling ++ * no configuration is possible ++ */ ++ unsigned int run_ctrl; /* 0x00000010 */ ++ /* ++ * I2C End Data Control Register ++ * This register is used to either turn around the data transmission ++ * direction or to address another slave without sending a stop ++ * condition. Also the software can stop the slave-transmitter by ++ * sending a not-accolade when working as master-receiver or even ++ * stop data transmission immediately when operating as ++ * master-transmitter. The writing to the bits of this control ++ * register is only effective when in MASTER RECEIVES BYTES, MASTER ++ * TRANSMITS BYTES, MASTER RESTART or SLAVE RECEIVE BYTES state ++ */ ++ unsigned int endd_ctrl; /* 0x00000014 */ ++ /* ++ * I2C Fractional Divider Configuration Register ++ * These register is used to program the fractional divider of the I2C ++ * bus. Before the peripheral is switched on by setting the RUN-bit the ++ * two (fixed) values for the two operating frequencies are programmed ++ * into these (configuration) registers. The Register FDIV_HIGH_CFG has ++ * the same layout as I2C_FDIV_CFG. ++ */ ++ unsigned int fdiv_cfg; /* 0x00000018 */ ++ /* ++ * I2C Fractional Divider (highspeed mode) Configuration Register ++ * These register is used to program the fractional divider of the I2C ++ * bus. Before the peripheral is switched on by setting the RUN-bit the ++ * two (fixed) values for the two operating frequencies are programmed ++ * into these (configuration) registers. The Register FDIV_CFG has the ++ * same layout as I2C_FDIV_CFG. ++ */ ++ unsigned int fdiv_high_cfg; /* 0x0000001C */ ++ /* I2C Address Configuration Register */ ++ unsigned int addr_cfg; /* 0x00000020 */ ++ /* I2C Bus Status Register ++ * This register gives a status information of the I2C. This additional ++ * information can be used by the software to start proper actions. ++ */ ++ unsigned int bus_stat; /* 0x00000024 */ ++ /* I2C FIFO Configuration Register */ ++ unsigned int fifo_cfg; /* 0x00000028 */ ++ /* I2C Maximum Received Packet Size Register */ ++ unsigned int mrps_ctrl; /* 0x0000002C */ ++ /* I2C Received Packet Size Status Register */ ++ unsigned int rps_stat; /* 0x00000030 */ ++ /* I2C Transmit Packet Size Register */ ++ unsigned int tps_ctrl; /* 0x00000034 */ ++ /* I2C Filled FIFO Stages Status Register */ ++ unsigned int ffs_stat; /* 0x00000038 */ ++ /* Reserved */ ++ unsigned int res_2; /* 0x0000003C */ ++ /* I2C Timing Configuration Register */ ++ unsigned int tim_cfg; /* 0x00000040 */ ++ /* Reserved */ ++ unsigned int res_3[7]; /* 0x00000044 */ ++ /* I2C Error Interrupt Request Source Mask Register */ ++ unsigned int err_irqsm; /* 0x00000060 */ ++ /* I2C Error Interrupt Request Source Status Register */ ++ unsigned int err_irqss; /* 0x00000064 */ ++ /* I2C Error Interrupt Request Source Clear Register */ ++ unsigned int err_irqsc; /* 0x00000068 */ ++ /* Reserved */ ++ unsigned int res_4; /* 0x0000006C */ ++ /* I2C Protocol Interrupt Request Source Mask Register */ ++ unsigned int p_irqsm; /* 0x00000070 */ ++ /* I2C Protocol Interrupt Request Source Status Register */ ++ unsigned int p_irqss; /* 0x00000074 */ ++ /* I2C Protocol Interrupt Request Source Clear Register */ ++ unsigned int p_irqsc; /* 0x00000078 */ ++ /* Reserved */ ++ unsigned int res_5; /* 0x0000007C */ ++ /* I2C Raw Interrupt Status Register */ ++ unsigned int ris; /* 0x00000080 */ ++ /* I2C Interrupt Mask Control Register */ ++ unsigned int imsc; /* 0x00000084 */ ++ /* I2C Masked Interrupt Status Register */ ++ unsigned int mis; /* 0x00000088 */ ++ /* I2C Interrupt Clear Register */ ++ unsigned int icr; /* 0x0000008C */ ++ /* I2C Interrupt Set Register */ ++ unsigned int isr; /* 0x00000090 */ ++ /* I2C DMA Enable Register */ ++ unsigned int dmae; /* 0x00000094 */ ++ /* Reserved */ ++ unsigned int res_6[8154]; /* 0x00000098 */ ++ /* I2C Transmit Data Register */ ++ unsigned int txd; /* 0x00008000 */ ++ /* Reserved */ ++ unsigned int res_7[4095]; /* 0x00008004 */ ++ /* I2C Receive Data Register */ ++ unsigned int rxd; /* 0x0000C000 */ ++ /* Reserved */ ++ unsigned int res_8[4095]; /* 0x0000C004 */ ++}; ++ ++/* ++ * Clock Divider for Normal Run Mode ++ * Max 8-bit divider value. IF RMC is 0 the module is disabled. Note: As long ++ * as the new divider value RMC is not valid, the register returns 0x0000 00xx ++ * on reading. ++ */ ++#define I2C_CLC_RMC_MASK 0x0000FF00 ++/* field offset */ ++#define I2C_CLC_RMC_OFFSET 8 ++ ++/* Fields of "I2C Identification Register" */ ++/* Module ID */ ++#define I2C_ID_ID_MASK 0x0000FF00 ++/* field offset */ ++#define I2C_ID_ID_OFFSET 8 ++/* Revision */ ++#define I2C_ID_REV_MASK 0x000000FF ++/* field offset */ ++#define I2C_ID_REV_OFFSET 0 ++ ++/* Fields of "I2C Interrupt Mask Control Register" */ ++/* Enable */ ++#define I2C_IMSC_BREQ_INT_EN 0x00000008 ++/* Enable */ ++#define I2C_IMSC_LBREQ_INT_EN 0x00000004 ++ ++/* Fields of "I2C Fractional Divider Configuration Register" */ ++/* field offset */ ++#define I2C_FDIV_CFG_INC_OFFSET 16 ++ ++/* Fields of "I2C Interrupt Mask Control Register" */ ++/* Enable */ ++#define I2C_IMSC_I2C_P_INT_EN 0x00000020 ++/* Enable */ ++#define I2C_IMSC_I2C_ERR_INT_EN 0x00000010 ++ ++/* Fields of "I2C Error Interrupt Request Source Status Register" */ ++/* TXF_OFL */ ++#define I2C_ERR_IRQSS_TXF_OFL 0x00000008 ++/* TXF_UFL */ ++#define I2C_ERR_IRQSS_TXF_UFL 0x00000004 ++/* RXF_OFL */ ++#define I2C_ERR_IRQSS_RXF_OFL 0x00000002 ++/* RXF_UFL */ ++#define I2C_ERR_IRQSS_RXF_UFL 0x00000001 ++ ++/* Fields of "I2C Raw Interrupt Status Register" */ ++/* Read: Interrupt occurred. */ ++#define I2C_RIS_I2C_ERR_INT_INTOCC 0x00000010 ++/* Read: Interrupt occurred. */ ++#define I2C_RIS_I2C_P_INT_INTOCC 0x00000020 ++ ++/* Fields of "I2C FIFO Configuration Register" */ ++/* TX FIFO Flow Control */ ++#define I2C_FIFO_CFG_TXFC 0x00020000 ++/* RX FIFO Flow Control */ ++#define I2C_FIFO_CFG_RXFC 0x00010000 ++/* Word aligned (character alignment of four characters) */ ++#define I2C_FIFO_CFG_TXFA_TXFA2 0x00002000 ++/* Word aligned (character alignment of four characters) */ ++#define I2C_FIFO_CFG_RXFA_RXFA2 0x00000200 ++/* 1 word */ ++#define I2C_FIFO_CFG_TXBS_TXBS0 0x00000000 ++ ++/* Fields of "I2C FIFO Configuration Register" */ ++/* 1 word */ ++#define I2C_FIFO_CFG_RXBS_RXBS0 0x00000000 ++/* Stop on Packet End Enable */ ++#define I2C_ADDR_CFG_SOPE_EN 0x00200000 ++/* Stop on Not Acknowledge Enable */ ++#define I2C_ADDR_CFG_SONA_EN 0x00100000 ++/* Enable */ ++#define I2C_ADDR_CFG_MnS_EN 0x00080000 ++ ++/* Fields of "I2C Interrupt Clear Register" */ ++/* Clear */ ++#define I2C_ICR_BREQ_INT_CLR 0x00000008 ++/* Clear */ ++#define I2C_ICR_LBREQ_INT_CLR 0x00000004 ++ ++/* Fields of "I2C Fractional Divider Configuration Register" */ ++/* field offset */ ++#define I2C_FDIV_CFG_DEC_OFFSET 0 ++ ++/* Fields of "I2C Bus Status Register" */ ++/* Bus Status */ ++#define I2C_BUS_STAT_BS_MASK 0x00000003 ++/* Read from I2C Bus. */ ++#define I2C_BUS_STAT_RNW_READ 0x00000004 ++/* I2C Bus is free. */ ++#define I2C_BUS_STAT_BS_FREE 0x00000000 ++/* ++ * The device is working as master and has claimed the control on the ++ * I2C-bus (busy master). ++ */ ++#define I2C_BUS_STAT_BS_BM 0x00000002 ++ ++/* Fields of "I2C RUN Control Register" */ ++/* Enable */ ++#define I2C_RUN_CTRL_RUN_EN 0x00000001 ++ ++/* Fields of "I2C End Data Control Register" */ ++/* ++ * Set End of Transmission ++ * Note:Do not write '1' to this bit when bus is free. This will cause an ++ * abort after the first byte when a new transfer is started. ++ */ ++#define I2C_ENDD_CTRL_SETEND 0x00000002 ++ ++/* Fields of "I2C Protocol Interrupt Request Source Status Register" */ ++/* NACK */ ++#define I2C_P_IRQSS_NACK 0x00000010 ++/* AL */ ++#define I2C_P_IRQSS_AL 0x00000008 ++/* RX */ ++#define I2C_P_IRQSS_RX 0x00000040 ++/* TX_END */ ++#define I2C_P_IRQSS_TX_END 0x00000020 ++ ++ ++#endif /* I2C_LANTIQ_H */ diff --git a/target/linux/lantiq/patches-4.1/0032-USB-fix-roothub-for-IFXHCD.patch b/target/linux/lantiq/patches-4.1/0032-USB-fix-roothub-for-IFXHCD.patch new file mode 100644 index 0000000000..c32e2bb597 --- /dev/null +++ b/target/linux/lantiq/patches-4.1/0032-USB-fix-roothub-for-IFXHCD.patch @@ -0,0 +1,31 @@ +From 326714a47233e4a524afa0c8398276fddf0dbd4d Mon Sep 17 00:00:00 2001 +From: John Crispin +Date: Thu, 6 Dec 2012 19:59:53 +0100 +Subject: [PATCH 32/36] USB: fix roothub for IFXHCD + +--- + arch/mips/lantiq/Kconfig | 1 + + drivers/usb/core/hub.c | 2 +- + 2 files changed, 2 insertions(+), 1 deletion(-) + +--- a/arch/mips/lantiq/Kconfig ++++ b/arch/mips/lantiq/Kconfig +@@ -3,6 +3,7 @@ if LANTIQ + config SOC_TYPE_XWAY + bool + select PINCTRL_XWAY ++ select USB_ARCH_HAS_HCD + default n + + choice +--- a/drivers/usb/core/hub.c ++++ b/drivers/usb/core/hub.c +@@ -4314,7 +4314,7 @@ hub_port_init (struct usb_hub *hub, stru + udev->ttport = hdev->ttport; + } else if (udev->speed != USB_SPEED_HIGH + && hdev->speed == USB_SPEED_HIGH) { +- if (!hub->tt.hub) { ++ if (hdev->parent && !hub->tt.hub) { + dev_err(&udev->dev, "parent hub has no TT\n"); + retval = -EINVAL; + goto fail; diff --git a/target/linux/lantiq/patches-4.1/0033-SPI-MIPS-lantiq-adds-spi-xway.patch b/target/linux/lantiq/patches-4.1/0033-SPI-MIPS-lantiq-adds-spi-xway.patch new file mode 100644 index 0000000000..124b6c2341 --- /dev/null +++ b/target/linux/lantiq/patches-4.1/0033-SPI-MIPS-lantiq-adds-spi-xway.patch @@ -0,0 +1,1020 @@ +From e75df4f96373e5d16f8ca13aa031e54cdcfeda62 Mon Sep 17 00:00:00 2001 +From: John Crispin +Date: Wed, 13 Mar 2013 09:29:37 +0100 +Subject: [PATCH 33/36] SPI: MIPS: lantiq: adds spi-xway + +This patch adds support for the SPI core found on several Lantiq SoCs. +The Driver has been runtime tested in combination with m25p80 Flash Devices +on Amazon_SE and VR9. + +Signed-off-by: Daniel Schwierzeck +Signed-off-by: John Crispin +--- + drivers/spi/Kconfig | 8 + + drivers/spi/Makefile | 1 + + drivers/spi/spi-xway.c | 977 ++++++++++++++++++++++++++++++++++++++++++++++++ + 3 files changed, 986 insertions(+) + create mode 100644 drivers/spi/spi-xway.c + +--- a/drivers/spi/Kconfig ++++ b/drivers/spi/Kconfig +@@ -626,6 +626,14 @@ config SPI_NUC900 + help + SPI driver for Nuvoton NUC900 series ARM SoCs + ++config SPI_XWAY ++ tristate "Lantiq XWAY SPI controller" ++ depends on LANTIQ && SOC_TYPE_XWAY ++ select SPI_BITBANG ++ help ++ This driver supports the Lantiq SoC SPI controller in master ++ mode. ++ + # + # Add new SPI master controllers in alphabetical order above this line + # +--- a/drivers/spi/Makefile ++++ b/drivers/spi/Makefile +@@ -90,3 +90,4 @@ obj-$(CONFIG_SPI_TXX9) += spi-txx9.o + obj-$(CONFIG_SPI_XCOMM) += spi-xcomm.o + obj-$(CONFIG_SPI_XILINX) += spi-xilinx.o + obj-$(CONFIG_SPI_XTENSA_XTFPGA) += spi-xtensa-xtfpga.o ++obj-$(CONFIG_SPI_XWAY) += spi-xway.o +--- /dev/null ++++ b/drivers/spi/spi-xway.c +@@ -0,0 +1,975 @@ ++/* ++ * Lantiq SoC SPI controller ++ * ++ * Copyright (C) 2011 Daniel Schwierzeck ++ * Copyright (C) 2012 John Crispin ++ * ++ * This program is free software; you can distribute it and/or modify it ++ * under the terms of the GNU General Public License (Version 2) as ++ * published by the Free Software Foundation. ++ */ ++ ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++ ++#include ++ ++#define LTQ_SPI_CLC 0x00 /* Clock control */ ++#define LTQ_SPI_PISEL 0x04 /* Port input select */ ++#define LTQ_SPI_ID 0x08 /* Identification */ ++#define LTQ_SPI_CON 0x10 /* Control */ ++#define LTQ_SPI_STAT 0x14 /* Status */ ++#define LTQ_SPI_WHBSTATE 0x18 /* Write HW modified state */ ++#define LTQ_SPI_TB 0x20 /* Transmit buffer */ ++#define LTQ_SPI_RB 0x24 /* Receive buffer */ ++#define LTQ_SPI_RXFCON 0x30 /* Receive FIFO control */ ++#define LTQ_SPI_TXFCON 0x34 /* Transmit FIFO control */ ++#define LTQ_SPI_FSTAT 0x38 /* FIFO status */ ++#define LTQ_SPI_BRT 0x40 /* Baudrate timer */ ++#define LTQ_SPI_BRSTAT 0x44 /* Baudrate timer status */ ++#define LTQ_SPI_SFCON 0x60 /* Serial frame control */ ++#define LTQ_SPI_SFSTAT 0x64 /* Serial frame status */ ++#define LTQ_SPI_GPOCON 0x70 /* General purpose output control */ ++#define LTQ_SPI_GPOSTAT 0x74 /* General purpose output status */ ++#define LTQ_SPI_FGPO 0x78 /* Forced general purpose output */ ++#define LTQ_SPI_RXREQ 0x80 /* Receive request */ ++#define LTQ_SPI_RXCNT 0x84 /* Receive count */ ++#define LTQ_SPI_DMACON 0xEC /* DMA control */ ++#define LTQ_SPI_IRNEN 0xF4 /* Interrupt node enable */ ++#define LTQ_SPI_IRNICR 0xF8 /* Interrupt node interrupt capture */ ++#define LTQ_SPI_IRNCR 0xFC /* Interrupt node control */ ++ ++#define LTQ_SPI_CLC_SMC_SHIFT 16 /* Clock divider for sleep mode */ ++#define LTQ_SPI_CLC_SMC_MASK 0xFF ++#define LTQ_SPI_CLC_RMC_SHIFT 8 /* Clock divider for normal run mode */ ++#define LTQ_SPI_CLC_RMC_MASK 0xFF ++#define LTQ_SPI_CLC_DISS BIT(1) /* Disable status bit */ ++#define LTQ_SPI_CLC_DISR BIT(0) /* Disable request bit */ ++ ++#define LTQ_SPI_ID_TXFS_SHIFT 24 /* Implemented TX FIFO size */ ++#define LTQ_SPI_ID_TXFS_MASK 0x3F ++#define LTQ_SPI_ID_RXFS_SHIFT 16 /* Implemented RX FIFO size */ ++#define LTQ_SPI_ID_RXFS_MASK 0x3F ++#define LTQ_SPI_ID_REV_MASK 0x1F /* Hardware revision number */ ++#define LTQ_SPI_ID_CFG BIT(5) /* DMA interface support */ ++ ++#define LTQ_SPI_CON_BM_SHIFT 16 /* Data width selection */ ++#define LTQ_SPI_CON_BM_MASK 0x1F ++#define LTQ_SPI_CON_EM BIT(24) /* Echo mode */ ++#define LTQ_SPI_CON_IDLE BIT(23) /* Idle bit value */ ++#define LTQ_SPI_CON_ENBV BIT(22) /* Enable byte valid control */ ++#define LTQ_SPI_CON_RUEN BIT(12) /* Receive underflow error enable */ ++#define LTQ_SPI_CON_TUEN BIT(11) /* Transmit underflow error enable */ ++#define LTQ_SPI_CON_AEN BIT(10) /* Abort error enable */ ++#define LTQ_SPI_CON_REN BIT(9) /* Receive overflow error enable */ ++#define LTQ_SPI_CON_TEN BIT(8) /* Transmit overflow error enable */ ++#define LTQ_SPI_CON_LB BIT(7) /* Loopback control */ ++#define LTQ_SPI_CON_PO BIT(6) /* Clock polarity control */ ++#define LTQ_SPI_CON_PH BIT(5) /* Clock phase control */ ++#define LTQ_SPI_CON_HB BIT(4) /* Heading control */ ++#define LTQ_SPI_CON_RXOFF BIT(1) /* Switch receiver off */ ++#define LTQ_SPI_CON_TXOFF BIT(0) /* Switch transmitter off */ ++ ++#define LTQ_SPI_STAT_RXBV_MASK 0x7 ++#define LTQ_SPI_STAT_RXBV_SHIFT 28 ++#define LTQ_SPI_STAT_BSY BIT(13) /* Busy flag */ ++#define LTQ_SPI_STAT_RUE BIT(12) /* Receive underflow error flag */ ++#define LTQ_SPI_STAT_TUE BIT(11) /* Transmit underflow error flag */ ++#define LTQ_SPI_STAT_AE BIT(10) /* Abort error flag */ ++#define LTQ_SPI_STAT_RE BIT(9) /* Receive error flag */ ++#define LTQ_SPI_STAT_TE BIT(8) /* Transmit error flag */ ++#define LTQ_SPI_STAT_MS BIT(1) /* Master/slave select bit */ ++#define LTQ_SPI_STAT_EN BIT(0) /* Enable bit */ ++ ++#define LTQ_SPI_WHBSTATE_SETTUE BIT(15) /* Set transmit underflow error flag */ ++#define LTQ_SPI_WHBSTATE_SETAE BIT(14) /* Set abort error flag */ ++#define LTQ_SPI_WHBSTATE_SETRE BIT(13) /* Set receive error flag */ ++#define LTQ_SPI_WHBSTATE_SETTE BIT(12) /* Set transmit error flag */ ++#define LTQ_SPI_WHBSTATE_CLRTUE BIT(11) /* Clear transmit underflow error ++ flag */ ++#define LTQ_SPI_WHBSTATE_CLRAE BIT(10) /* Clear abort error flag */ ++#define LTQ_SPI_WHBSTATE_CLRRE BIT(9) /* Clear receive error flag */ ++#define LTQ_SPI_WHBSTATE_CLRTE BIT(8) /* Clear transmit error flag */ ++#define LTQ_SPI_WHBSTATE_SETME BIT(7) /* Set mode error flag */ ++#define LTQ_SPI_WHBSTATE_CLRME BIT(6) /* Clear mode error flag */ ++#define LTQ_SPI_WHBSTATE_SETRUE BIT(5) /* Set receive underflow error flag */ ++#define LTQ_SPI_WHBSTATE_CLRRUE BIT(4) /* Clear receive underflow error flag */ ++#define LTQ_SPI_WHBSTATE_SETMS BIT(3) /* Set master select bit */ ++#define LTQ_SPI_WHBSTATE_CLRMS BIT(2) /* Clear master select bit */ ++#define LTQ_SPI_WHBSTATE_SETEN BIT(1) /* Set enable bit (operational mode) */ ++#define LTQ_SPI_WHBSTATE_CLREN BIT(0) /* Clear enable bit (config mode */ ++#define LTQ_SPI_WHBSTATE_CLR_ERRORS 0x0F50 ++ ++#define LTQ_SPI_RXFCON_RXFITL_SHIFT 8 /* FIFO interrupt trigger level */ ++#define LTQ_SPI_RXFCON_RXFITL_MASK 0x3F ++#define LTQ_SPI_RXFCON_RXFLU BIT(1) /* FIFO flush */ ++#define LTQ_SPI_RXFCON_RXFEN BIT(0) /* FIFO enable */ ++ ++#define LTQ_SPI_TXFCON_TXFITL_SHIFT 8 /* FIFO interrupt trigger level */ ++#define LTQ_SPI_TXFCON_TXFITL_MASK 0x3F ++#define LTQ_SPI_TXFCON_TXFLU BIT(1) /* FIFO flush */ ++#define LTQ_SPI_TXFCON_TXFEN BIT(0) /* FIFO enable */ ++ ++#define LTQ_SPI_FSTAT_RXFFL_MASK 0x3f ++#define LTQ_SPI_FSTAT_RXFFL_SHIFT 0 ++#define LTQ_SPI_FSTAT_TXFFL_MASK 0x3f ++#define LTQ_SPI_FSTAT_TXFFL_SHIFT 8 ++ ++#define LTQ_SPI_GPOCON_ISCSBN_SHIFT 8 ++#define LTQ_SPI_GPOCON_INVOUTN_SHIFT 0 ++ ++#define LTQ_SPI_FGPO_SETOUTN_SHIFT 8 ++#define LTQ_SPI_FGPO_CLROUTN_SHIFT 0 ++ ++#define LTQ_SPI_RXREQ_RXCNT_MASK 0xFFFF /* Receive count value */ ++#define LTQ_SPI_RXCNT_TODO_MASK 0xFFFF /* Recevie to-do value */ ++ ++#define LTQ_SPI_IRNEN_F BIT(3) /* Frame end interrupt request */ ++#define LTQ_SPI_IRNEN_E BIT(2) /* Error end interrupt request */ ++#define LTQ_SPI_IRNEN_T BIT(1) /* Transmit end interrupt request */ ++#define LTQ_SPI_IRNEN_R BIT(0) /* Receive end interrupt request */ ++#define LTQ_SPI_IRNEN_ALL 0xF ++ ++struct ltq_spi { ++ struct spi_bitbang bitbang; ++ struct completion done; ++ spinlock_t lock; ++ ++ struct device *dev; ++ void __iomem *base; ++ struct clk *fpiclk; ++ struct clk *spiclk; ++ ++ int status; ++ int irq[3]; ++ ++ const u8 *tx; ++ u8 *rx; ++ u32 tx_cnt; ++ u32 rx_cnt; ++ u32 len; ++ struct spi_transfer *curr_transfer; ++ ++ u32 (*get_tx) (struct ltq_spi *); ++ ++ u16 txfs; ++ u16 rxfs; ++ unsigned dma_support:1; ++ unsigned cfg_mode:1; ++}; ++ ++static inline struct ltq_spi *ltq_spi_to_hw(struct spi_device *spi) ++{ ++ return spi_master_get_devdata(spi->master); ++} ++ ++static inline u32 ltq_spi_reg_read(struct ltq_spi *hw, u32 reg) ++{ ++ return ioread32be(hw->base + reg); ++} ++ ++static inline void ltq_spi_reg_write(struct ltq_spi *hw, u32 val, u32 reg) ++{ ++ iowrite32be(val, hw->base + reg); ++} ++ ++static inline void ltq_spi_reg_setbit(struct ltq_spi *hw, u32 bits, u32 reg) ++{ ++ u32 val; ++ ++ val = ltq_spi_reg_read(hw, reg); ++ val |= bits; ++ ltq_spi_reg_write(hw, val, reg); ++} ++ ++static inline void ltq_spi_reg_clearbit(struct ltq_spi *hw, u32 bits, u32 reg) ++{ ++ u32 val; ++ ++ val = ltq_spi_reg_read(hw, reg); ++ val &= ~bits; ++ ltq_spi_reg_write(hw, val, reg); ++} ++ ++static void ltq_spi_hw_enable(struct ltq_spi *hw) ++{ ++ u32 clc; ++ ++ /* Power-up module */ ++ clk_enable(hw->spiclk); ++ ++ /* ++ * Set clock divider for run mode to 1 to ++ * run at same frequency as FPI bus ++ */ ++ clc = (1 << LTQ_SPI_CLC_RMC_SHIFT); ++ ltq_spi_reg_write(hw, clc, LTQ_SPI_CLC); ++} ++ ++static void ltq_spi_hw_disable(struct ltq_spi *hw) ++{ ++ /* Set clock divider to 0 and set module disable bit */ ++ ltq_spi_reg_write(hw, LTQ_SPI_CLC_DISS, LTQ_SPI_CLC); ++ ++ /* Power-down module */ ++ clk_disable(hw->spiclk); ++} ++ ++static void ltq_spi_reset_fifos(struct ltq_spi *hw) ++{ ++ u32 val; ++ ++ /* ++ * Enable and flush FIFOs. Set interrupt trigger level to ++ * half of FIFO count implemented in hardware. ++ */ ++ if (hw->txfs > 1) { ++ val = hw->txfs << (LTQ_SPI_TXFCON_TXFITL_SHIFT - 1); ++ val |= LTQ_SPI_TXFCON_TXFEN | LTQ_SPI_TXFCON_TXFLU; ++ ltq_spi_reg_write(hw, val, LTQ_SPI_TXFCON); ++ } ++ ++ if (hw->rxfs > 1) { ++ val = hw->rxfs << (LTQ_SPI_RXFCON_RXFITL_SHIFT - 1); ++ val |= LTQ_SPI_RXFCON_RXFEN | LTQ_SPI_RXFCON_RXFLU; ++ ltq_spi_reg_write(hw, val, LTQ_SPI_RXFCON); ++ } ++} ++ ++static inline int ltq_spi_wait_ready(struct ltq_spi *hw) ++{ ++ u32 stat; ++ unsigned long timeout; ++ ++ timeout = jiffies + msecs_to_jiffies(200); ++ ++ do { ++ stat = ltq_spi_reg_read(hw, LTQ_SPI_STAT); ++ if (!(stat & LTQ_SPI_STAT_BSY)) ++ return 0; ++ ++ cond_resched(); ++ } while (!time_after_eq(jiffies, timeout)); ++ ++ dev_err(hw->dev, "SPI wait ready timed out stat: %x\n", stat); ++ ++ return -ETIMEDOUT; ++} ++ ++static void ltq_spi_config_mode_set(struct ltq_spi *hw) ++{ ++ if (hw->cfg_mode) ++ return; ++ ++ /* ++ * Putting the SPI module in config mode is only safe if no ++ * transfer is in progress as indicated by busy flag STATE.BSY. ++ */ ++ if (ltq_spi_wait_ready(hw)) { ++ ltq_spi_reset_fifos(hw); ++ hw->status = -ETIMEDOUT; ++ } ++ ltq_spi_reg_write(hw, LTQ_SPI_WHBSTATE_CLREN, LTQ_SPI_WHBSTATE); ++ ++ hw->cfg_mode = 1; ++} ++ ++static void ltq_spi_run_mode_set(struct ltq_spi *hw) ++{ ++ if (!hw->cfg_mode) ++ return; ++ ++ ltq_spi_reg_write(hw, LTQ_SPI_WHBSTATE_SETEN, LTQ_SPI_WHBSTATE); ++ ++ hw->cfg_mode = 0; ++} ++ ++static u32 ltq_spi_tx_word_u8(struct ltq_spi *hw) ++{ ++ const u8 *tx = hw->tx; ++ u32 data = *tx++; ++ ++ hw->tx_cnt++; ++ hw->tx++; ++ ++ return data; ++} ++ ++static u32 ltq_spi_tx_word_u16(struct ltq_spi *hw) ++{ ++ const u16 *tx = (u16 *) hw->tx; ++ u32 data = *tx++; ++ ++ hw->tx_cnt += 2; ++ hw->tx += 2; ++ ++ return data; ++} ++ ++static u32 ltq_spi_tx_word_u32(struct ltq_spi *hw) ++{ ++ const u32 *tx = (u32 *) hw->tx; ++ u32 data = *tx++; ++ ++ hw->tx_cnt += 4; ++ hw->tx += 4; ++ ++ return data; ++} ++ ++static void ltq_spi_bits_per_word_set(struct spi_device *spi) ++{ ++ struct ltq_spi *hw = ltq_spi_to_hw(spi); ++ u32 bm; ++ u8 bits_per_word = spi->bits_per_word; ++ ++ /* ++ * Use either default value of SPI device or value ++ * from current transfer. ++ */ ++ if (hw->curr_transfer && hw->curr_transfer->bits_per_word) ++ bits_per_word = hw->curr_transfer->bits_per_word; ++ ++ if (bits_per_word <= 8) ++ hw->get_tx = ltq_spi_tx_word_u8; ++ else if (bits_per_word <= 16) ++ hw->get_tx = ltq_spi_tx_word_u16; ++ else if (bits_per_word <= 32) ++ hw->get_tx = ltq_spi_tx_word_u32; ++ ++ /* CON.BM value = bits_per_word - 1 */ ++ bm = (bits_per_word - 1) << LTQ_SPI_CON_BM_SHIFT; ++ ++ ltq_spi_reg_clearbit(hw, LTQ_SPI_CON_BM_MASK << ++ LTQ_SPI_CON_BM_SHIFT, LTQ_SPI_CON); ++ ltq_spi_reg_setbit(hw, bm, LTQ_SPI_CON); ++} ++ ++static void ltq_spi_speed_set(struct spi_device *spi) ++{ ++ struct ltq_spi *hw = ltq_spi_to_hw(spi); ++ u32 br, max_speed_hz, spi_clk; ++ u32 speed_hz = spi->max_speed_hz; ++ ++ /* ++ * Use either default value of SPI device or value ++ * from current transfer. ++ */ ++ if (hw->curr_transfer && hw->curr_transfer->speed_hz) ++ speed_hz = hw->curr_transfer->speed_hz; ++ ++ /* ++ * SPI module clock is derived from FPI bus clock dependent on ++ * divider value in CLC.RMS which is always set to 1. ++ */ ++ spi_clk = clk_get_rate(hw->fpiclk); ++ ++ /* ++ * Maximum SPI clock frequency in master mode is half of ++ * SPI module clock frequency. Maximum reload value of ++ * baudrate generator BR is 2^16. ++ */ ++ max_speed_hz = spi_clk / 2; ++ if (speed_hz >= max_speed_hz) ++ br = 0; ++ else ++ br = (max_speed_hz / speed_hz) - 1; ++ ++ if (br > 0xFFFF) ++ br = 0xFFFF; ++ ++ ltq_spi_reg_write(hw, br, LTQ_SPI_BRT); ++} ++ ++static void ltq_spi_clockmode_set(struct spi_device *spi) ++{ ++ struct ltq_spi *hw = ltq_spi_to_hw(spi); ++ u32 con; ++ ++ con = ltq_spi_reg_read(hw, LTQ_SPI_CON); ++ ++ /* ++ * SPI mode mapping in CON register: ++ * Mode CPOL CPHA CON.PO CON.PH ++ * 0 0 0 0 1 ++ * 1 0 1 0 0 ++ * 2 1 0 1 1 ++ * 3 1 1 1 0 ++ */ ++ if (spi->mode & SPI_CPHA) ++ con &= ~LTQ_SPI_CON_PH; ++ else ++ con |= LTQ_SPI_CON_PH; ++ ++ if (spi->mode & SPI_CPOL) ++ con |= LTQ_SPI_CON_PO; ++ else ++ con &= ~LTQ_SPI_CON_PO; ++ ++ /* Set heading control */ ++ if (spi->mode & SPI_LSB_FIRST) ++ con &= ~LTQ_SPI_CON_HB; ++ else ++ con |= LTQ_SPI_CON_HB; ++ ++ ltq_spi_reg_write(hw, con, LTQ_SPI_CON); ++} ++ ++static void ltq_spi_xmit_set(struct ltq_spi *hw, struct spi_transfer *t) ++{ ++ u32 con; ++ ++ con = ltq_spi_reg_read(hw, LTQ_SPI_CON); ++ ++ if (t) { ++ if (t->tx_buf && t->rx_buf) { ++ con &= ~(LTQ_SPI_CON_TXOFF | LTQ_SPI_CON_RXOFF); ++ } else if (t->rx_buf) { ++ con &= ~LTQ_SPI_CON_RXOFF; ++ con |= LTQ_SPI_CON_TXOFF; ++ } else if (t->tx_buf) { ++ con &= ~LTQ_SPI_CON_TXOFF; ++ con |= LTQ_SPI_CON_RXOFF; ++ } ++ } else ++ con |= (LTQ_SPI_CON_TXOFF | LTQ_SPI_CON_RXOFF); ++ ++ ltq_spi_reg_write(hw, con, LTQ_SPI_CON); ++} ++ ++static void ltq_spi_internal_cs_activate(struct spi_device *spi) ++{ ++ struct ltq_spi *hw = ltq_spi_to_hw(spi); ++ u32 fgpo; ++ ++ fgpo = (1 << (spi->chip_select + LTQ_SPI_FGPO_CLROUTN_SHIFT)); ++ ltq_spi_reg_setbit(hw, fgpo, LTQ_SPI_FGPO); ++} ++ ++static void ltq_spi_internal_cs_deactivate(struct spi_device *spi) ++{ ++ struct ltq_spi *hw = ltq_spi_to_hw(spi); ++ u32 fgpo; ++ ++ fgpo = (1 << (spi->chip_select + LTQ_SPI_FGPO_SETOUTN_SHIFT)); ++ ltq_spi_reg_setbit(hw, fgpo, LTQ_SPI_FGPO); ++} ++ ++static void ltq_spi_chipselect(struct spi_device *spi, int cs) ++{ ++ struct ltq_spi *hw = ltq_spi_to_hw(spi); ++ ++ switch (cs) { ++ case BITBANG_CS_ACTIVE: ++ ltq_spi_bits_per_word_set(spi); ++ ltq_spi_speed_set(spi); ++ ltq_spi_clockmode_set(spi); ++ ltq_spi_run_mode_set(hw); ++ ltq_spi_internal_cs_activate(spi); ++ break; ++ ++ case BITBANG_CS_INACTIVE: ++ ltq_spi_internal_cs_deactivate(spi); ++ ltq_spi_config_mode_set(hw); ++ break; ++ } ++} ++ ++static int ltq_spi_setup_transfer(struct spi_device *spi, ++ struct spi_transfer *t) ++{ ++ struct ltq_spi *hw = ltq_spi_to_hw(spi); ++ u8 bits_per_word = spi->bits_per_word; ++ ++ hw->curr_transfer = t; ++ ++ if (t && t->bits_per_word) ++ bits_per_word = t->bits_per_word; ++ ++ if (bits_per_word > 32) ++ return -EINVAL; ++ ++ ltq_spi_config_mode_set(hw); ++ ++ return 0; ++} ++ ++static int ltq_spi_setup(struct spi_device *spi) ++{ ++ struct ltq_spi *hw = ltq_spi_to_hw(spi); ++ u32 gpocon, fgpo; ++ ++ /* Set default word length to 8 if not set */ ++ if (!spi->bits_per_word) ++ spi->bits_per_word = 8; ++ ++ if (spi->bits_per_word > 32) ++ return -EINVAL; ++ ++ /* ++ * Up to six GPIOs can be connected to the SPI module ++ * via GPIO alternate function to control the chip select lines. ++ */ ++ gpocon = (1 << (spi->chip_select + ++ LTQ_SPI_GPOCON_ISCSBN_SHIFT)); ++ ++ if (spi->mode & SPI_CS_HIGH) ++ gpocon |= (1 << spi->chip_select); ++ ++ fgpo = (1 << (spi->chip_select + LTQ_SPI_FGPO_SETOUTN_SHIFT)); ++ ++ ltq_spi_reg_setbit(hw, gpocon, LTQ_SPI_GPOCON); ++ ltq_spi_reg_setbit(hw, fgpo, LTQ_SPI_FGPO); ++ ++ return 0; ++} ++ ++static void ltq_spi_cleanup(struct spi_device *spi) ++{ ++ ++} ++ ++static void ltq_spi_txfifo_write(struct ltq_spi *hw) ++{ ++ u32 fstat, data; ++ u16 fifo_space; ++ ++ /* Determine how much FIFOs are free for TX data */ ++ fstat = ltq_spi_reg_read(hw, LTQ_SPI_FSTAT); ++ fifo_space = hw->txfs - ((fstat >> LTQ_SPI_FSTAT_TXFFL_SHIFT) & ++ LTQ_SPI_FSTAT_TXFFL_MASK); ++ ++ if (!fifo_space) ++ return; ++ ++ while (hw->tx_cnt < hw->len && fifo_space) { ++ data = hw->get_tx(hw); ++ ltq_spi_reg_write(hw, data, LTQ_SPI_TB); ++ fifo_space--; ++ } ++} ++ ++static void ltq_spi_rxfifo_read(struct ltq_spi *hw) ++{ ++ u32 fstat, data, *rx32; ++ u16 fifo_fill; ++ u8 rxbv, shift, *rx8; ++ ++ /* Determine how much FIFOs are filled with RX data */ ++ fstat = ltq_spi_reg_read(hw, LTQ_SPI_FSTAT); ++ fifo_fill = ((fstat >> LTQ_SPI_FSTAT_RXFFL_SHIFT) ++ & LTQ_SPI_FSTAT_RXFFL_MASK); ++ ++ if (!fifo_fill) ++ return; ++ ++ /* ++ * The 32 bit FIFO is always used completely independent from the ++ * bits_per_word value. Thus four bytes have to be read at once ++ * per FIFO. ++ */ ++ rx32 = (u32 *) hw->rx; ++ while (hw->len - hw->rx_cnt >= 4 && fifo_fill) { ++ *rx32++ = ltq_spi_reg_read(hw, LTQ_SPI_RB); ++ hw->rx_cnt += 4; ++ hw->rx += 4; ++ fifo_fill--; ++ } ++ ++ /* ++ * If there are remaining bytes, read byte count from STAT.RXBV ++ * register and read the data byte-wise. ++ */ ++ while (fifo_fill && hw->rx_cnt < hw->len) { ++ rxbv = (ltq_spi_reg_read(hw, LTQ_SPI_STAT) >> ++ LTQ_SPI_STAT_RXBV_SHIFT) & LTQ_SPI_STAT_RXBV_MASK; ++ data = ltq_spi_reg_read(hw, LTQ_SPI_RB); ++ ++ shift = (rxbv - 1) * 8; ++ rx8 = hw->rx; ++ ++ while (rxbv) { ++ *rx8++ = (data >> shift) & 0xFF; ++ rxbv--; ++ shift -= 8; ++ hw->rx_cnt++; ++ hw->rx++; ++ } ++ ++ fifo_fill--; ++ } ++} ++ ++static void ltq_spi_rxreq_set(struct ltq_spi *hw) ++{ ++ u32 rxreq, rxreq_max, rxtodo; ++ ++ rxtodo = ltq_spi_reg_read(hw, LTQ_SPI_RXCNT) & LTQ_SPI_RXCNT_TODO_MASK; ++ ++ /* ++ * In RX-only mode the serial clock is activated only after writing ++ * the expected amount of RX bytes into RXREQ register. ++ * To avoid receive overflows at high clocks it is better to request ++ * only the amount of bytes that fits into all FIFOs. This value ++ * depends on the FIFO size implemented in hardware. ++ */ ++ rxreq = hw->len - hw->rx_cnt; ++ rxreq_max = hw->rxfs << 2; ++ rxreq = min(rxreq_max, rxreq); ++ ++ if (!rxtodo && rxreq) ++ ltq_spi_reg_write(hw, rxreq, LTQ_SPI_RXREQ); ++} ++ ++static inline void ltq_spi_complete(struct ltq_spi *hw) ++{ ++ complete(&hw->done); ++} ++ ++irqreturn_t ltq_spi_tx_irq(int irq, void *data) ++{ ++ struct ltq_spi *hw = data; ++ unsigned long flags; ++ int completed = 0; ++ ++ spin_lock_irqsave(&hw->lock, flags); ++ ++ if (hw->tx_cnt < hw->len) ++ ltq_spi_txfifo_write(hw); ++ ++ if (hw->tx_cnt == hw->len) ++ completed = 1; ++ ++ spin_unlock_irqrestore(&hw->lock, flags); ++ ++ if (completed) ++ ltq_spi_complete(hw); ++ ++ return IRQ_HANDLED; ++} ++ ++irqreturn_t ltq_spi_rx_irq(int irq, void *data) ++{ ++ struct ltq_spi *hw = data; ++ unsigned long flags; ++ int completed = 0; ++ ++ spin_lock_irqsave(&hw->lock, flags); ++ ++ if (hw->rx_cnt < hw->len) { ++ ltq_spi_rxfifo_read(hw); ++ ++ if (hw->tx && hw->tx_cnt < hw->len) ++ ltq_spi_txfifo_write(hw); ++ } ++ ++ if (hw->rx_cnt == hw->len) ++ completed = 1; ++ else if (!hw->tx) ++ ltq_spi_rxreq_set(hw); ++ ++ spin_unlock_irqrestore(&hw->lock, flags); ++ ++ if (completed) ++ ltq_spi_complete(hw); ++ ++ return IRQ_HANDLED; ++} ++ ++irqreturn_t ltq_spi_err_irq(int irq, void *data) ++{ ++ struct ltq_spi *hw = data; ++ unsigned long flags; ++ ++ spin_lock_irqsave(&hw->lock, flags); ++ ++ /* Disable all interrupts */ ++ ltq_spi_reg_clearbit(hw, LTQ_SPI_IRNEN_ALL, LTQ_SPI_IRNEN); ++ ++ /* Clear all error flags */ ++ ltq_spi_reg_write(hw, LTQ_SPI_WHBSTATE_CLR_ERRORS, LTQ_SPI_WHBSTATE); ++ ++ /* Flush FIFOs */ ++ ltq_spi_reg_setbit(hw, LTQ_SPI_RXFCON_RXFLU, LTQ_SPI_RXFCON); ++ ltq_spi_reg_setbit(hw, LTQ_SPI_TXFCON_TXFLU, LTQ_SPI_TXFCON); ++ ++ hw->status = -EIO; ++ spin_unlock_irqrestore(&hw->lock, flags); ++ ++ ltq_spi_complete(hw); ++ ++ return IRQ_HANDLED; ++} ++ ++static int ltq_spi_txrx_bufs(struct spi_device *spi, struct spi_transfer *t) ++{ ++ struct ltq_spi *hw = ltq_spi_to_hw(spi); ++ u32 irq_flags = 0; ++ ++ hw->tx = t->tx_buf; ++ hw->rx = t->rx_buf; ++ hw->len = t->len; ++ hw->tx_cnt = 0; ++ hw->rx_cnt = 0; ++ hw->status = 0; ++ init_completion(&hw->done); ++ ++ ltq_spi_xmit_set(hw, t); ++ ++ /* Enable error interrupts */ ++ ltq_spi_reg_setbit(hw, LTQ_SPI_IRNEN_E, LTQ_SPI_IRNEN); ++ ++ if (hw->tx) { ++ /* Initially fill TX FIFO with as much data as possible */ ++ ltq_spi_txfifo_write(hw); ++ irq_flags |= LTQ_SPI_IRNEN_T; ++ ++ /* Always enable RX interrupt in Full Duplex mode */ ++ if (hw->rx) ++ irq_flags |= LTQ_SPI_IRNEN_R; ++ } else if (hw->rx) { ++ /* Start RX clock */ ++ ltq_spi_rxreq_set(hw); ++ ++ /* Enable RX interrupt to receive data from RX FIFOs */ ++ irq_flags |= LTQ_SPI_IRNEN_R; ++ } ++ ++ /* Enable TX or RX interrupts */ ++ ltq_spi_reg_setbit(hw, irq_flags, LTQ_SPI_IRNEN); ++ wait_for_completion_interruptible(&hw->done); ++ ++ /* Disable all interrupts */ ++ ltq_spi_reg_clearbit(hw, LTQ_SPI_IRNEN_ALL, LTQ_SPI_IRNEN); ++ ++ /* ++ * Return length of current transfer for bitbang utility code if ++ * no errors occured during transmission. ++ */ ++ if (!hw->status) ++ hw->status = hw->len; ++ ++ return hw->status; ++} ++ ++static const struct ltq_spi_irq_map { ++ char *name; ++ irq_handler_t handler; ++} ltq_spi_irqs[] = { ++ { "spi_rx", ltq_spi_rx_irq }, ++ { "spi_tx", ltq_spi_tx_irq }, ++ { "spi_err", ltq_spi_err_irq }, ++}; ++ ++static int ltq_spi_probe(struct platform_device *pdev) ++{ ++ struct resource irqres[3]; ++ struct spi_master *master; ++ struct resource *r; ++ struct ltq_spi *hw; ++ int ret, i; ++ u32 data, id; ++ ++ if (of_irq_to_resource_table(pdev->dev.of_node, irqres, 3) != 3) { ++ dev_err(&pdev->dev, "IRQ settings missing in device tree\n"); ++ return -EINVAL; ++ } ++ ++ master = spi_alloc_master(&pdev->dev, sizeof(struct ltq_spi)); ++ if (!master) { ++ dev_err(&pdev->dev, "spi_alloc_master\n"); ++ ret = -ENOMEM; ++ goto err; ++ } ++ ++ hw = spi_master_get_devdata(master); ++ ++ r = platform_get_resource(pdev, IORESOURCE_MEM, 0); ++ if (r == NULL) { ++ dev_err(&pdev->dev, "platform_get_resource\n"); ++ ret = -ENOENT; ++ goto err_master; ++ } ++ ++ r = devm_request_mem_region(&pdev->dev, r->start, resource_size(r), ++ pdev->name); ++ if (!r) { ++ dev_err(&pdev->dev, "failed to request memory region\n"); ++ ret = -ENXIO; ++ goto err_master; ++ } ++ ++ hw->base = devm_ioremap_nocache(&pdev->dev, r->start, resource_size(r)); ++ if (!hw->base) { ++ dev_err(&pdev->dev, "failed to remap memory region\n"); ++ ret = -ENXIO; ++ goto err_master; ++ } ++ ++ memset(hw->irq, 0, sizeof(hw->irq)); ++ for (i = 0; i < ARRAY_SIZE(ltq_spi_irqs); i++) { ++ hw->irq[i] = irqres[i].start; ++ ret = request_irq(hw->irq[i], ltq_spi_irqs[i].handler, ++ 0, ltq_spi_irqs[i].name, hw); ++ if (ret) { ++ dev_err(&pdev->dev, "failed to request %s irq (%d)\n", ++ ltq_spi_irqs[i].name, hw->irq[i]); ++ goto err_irq; ++ } ++ } ++ ++ hw->fpiclk = clk_get_fpi(); ++ if (IS_ERR(hw->fpiclk)) { ++ dev_err(&pdev->dev, "failed to get fpi clock\n"); ++ ret = PTR_ERR(hw->fpiclk); ++ goto err_clk; ++ } ++ ++ hw->spiclk = clk_get(&pdev->dev, NULL); ++ if (IS_ERR(hw->spiclk)) { ++ dev_err(&pdev->dev, "failed to get spi clock gate\n"); ++ ret = PTR_ERR(hw->spiclk); ++ goto err_clk; ++ } ++ ++ hw->bitbang.master = spi_master_get(master); ++ hw->bitbang.chipselect = ltq_spi_chipselect; ++ hw->bitbang.setup_transfer = ltq_spi_setup_transfer; ++ hw->bitbang.txrx_bufs = ltq_spi_txrx_bufs; ++ ++ if (of_machine_is_compatible("lantiq,ase")) ++ master->num_chipselect = 3; ++ else ++ master->num_chipselect = 6; ++ master->bus_num = pdev->id; ++ master->setup = ltq_spi_setup; ++ master->cleanup = ltq_spi_cleanup; ++ master->dev.of_node = pdev->dev.of_node; ++ ++ hw->dev = &pdev->dev; ++ init_completion(&hw->done); ++ spin_lock_init(&hw->lock); ++ ++ ltq_spi_hw_enable(hw); ++ ++ /* Read module capabilities */ ++ id = ltq_spi_reg_read(hw, LTQ_SPI_ID); ++ hw->txfs = (id >> LTQ_SPI_ID_TXFS_SHIFT) & LTQ_SPI_ID_TXFS_MASK; ++ hw->rxfs = (id >> LTQ_SPI_ID_TXFS_SHIFT) & LTQ_SPI_ID_TXFS_MASK; ++ hw->dma_support = (id & LTQ_SPI_ID_CFG) ? 1 : 0; ++ ++ ltq_spi_config_mode_set(hw); ++ ++ /* Enable error checking, disable TX/RX, set idle value high */ ++ data = LTQ_SPI_CON_RUEN | LTQ_SPI_CON_AEN | ++ LTQ_SPI_CON_TEN | LTQ_SPI_CON_REN | ++ LTQ_SPI_CON_TXOFF | LTQ_SPI_CON_RXOFF | LTQ_SPI_CON_IDLE; ++ ltq_spi_reg_write(hw, data, LTQ_SPI_CON); ++ ++ /* Enable master mode and clear error flags */ ++ ltq_spi_reg_write(hw, LTQ_SPI_WHBSTATE_SETMS | ++ LTQ_SPI_WHBSTATE_CLR_ERRORS, LTQ_SPI_WHBSTATE); ++ ++ /* Reset GPIO/CS registers */ ++ ltq_spi_reg_write(hw, 0x0, LTQ_SPI_GPOCON); ++ ltq_spi_reg_write(hw, 0xFF00, LTQ_SPI_FGPO); ++ ++ /* Enable and flush FIFOs */ ++ ltq_spi_reset_fifos(hw); ++ ++ ret = spi_bitbang_start(&hw->bitbang); ++ if (ret) { ++ dev_err(&pdev->dev, "spi_bitbang_start failed\n"); ++ goto err_bitbang; ++ } ++ ++ platform_set_drvdata(pdev, hw); ++ ++ pr_info("Lantiq SoC SPI controller rev %u (TXFS %u, RXFS %u, DMA %u)\n", ++ id & LTQ_SPI_ID_REV_MASK, hw->txfs, hw->rxfs, hw->dma_support); ++ ++ return 0; ++ ++err_bitbang: ++ ltq_spi_hw_disable(hw); ++ ++err_clk: ++ if (hw->fpiclk) ++ clk_put(hw->fpiclk); ++ if (hw->spiclk) ++ clk_put(hw->spiclk); ++ ++err_irq: ++ clk_put(hw->fpiclk); ++ ++ for (; i > 0; i--) ++ free_irq(hw->irq[i], hw); ++ ++err_master: ++ spi_master_put(master); ++ ++err: ++ return ret; ++} ++ ++static int ltq_spi_remove(struct platform_device *pdev) ++{ ++ struct ltq_spi *hw = platform_get_drvdata(pdev); ++ int i; ++ ++ spi_bitbang_stop(&hw->bitbang); ++ ++ platform_set_drvdata(pdev, NULL); ++ ++ ltq_spi_config_mode_set(hw); ++ ltq_spi_hw_disable(hw); ++ ++ for (i = 0; i < ARRAY_SIZE(hw->irq); i++) ++ if (0 < hw->irq[i]) ++ free_irq(hw->irq[i], hw); ++ ++ if (hw->fpiclk) ++ clk_put(hw->fpiclk); ++ if (hw->spiclk) ++ clk_put(hw->spiclk); ++ ++ spi_master_put(hw->bitbang.master); ++ ++ return 0; ++} ++ ++static const struct of_device_id ltq_spi_match[] = { ++ { .compatible = "lantiq,spi-xway" }, ++ {}, ++}; ++MODULE_DEVICE_TABLE(of, ltq_spi_match); ++ ++static struct platform_driver ltq_spi_driver = { ++ .probe = ltq_spi_probe, ++ .remove = ltq_spi_remove, ++ .driver = { ++ .name = "spi-xway", ++ .owner = THIS_MODULE, ++ .of_match_table = ltq_spi_match, ++ }, ++}; ++ ++module_platform_driver(ltq_spi_driver); ++ ++MODULE_DESCRIPTION("Lantiq SoC SPI controller driver"); ++MODULE_AUTHOR("Daniel Schwierzeck "); ++MODULE_LICENSE("GPL"); ++MODULE_ALIAS("platform:spi-xway"); diff --git a/target/linux/lantiq/patches-4.1/0034-reset-Fix-compile-when-reset-RESET_CONTROLLER-is-not.patch b/target/linux/lantiq/patches-4.1/0034-reset-Fix-compile-when-reset-RESET_CONTROLLER-is-not.patch new file mode 100644 index 0000000000..ddbe134c1b --- /dev/null +++ b/target/linux/lantiq/patches-4.1/0034-reset-Fix-compile-when-reset-RESET_CONTROLLER-is-not.patch @@ -0,0 +1,45 @@ +From b1b9fca8c317afc3f2b78bb54f877e8a830a819d Mon Sep 17 00:00:00 2001 +From: John Crispin +Date: Fri, 9 Aug 2013 18:47:27 +0200 +Subject: [PATCH 34/36] reset: Fix compile when reset RESET_CONTROLLER is not + selected + +Drivers need to protect their reset api calls with #ifdef to avoid compile +errors. + +This patch adds dummy wrappers in the same way that linux/of.h does it. + +Cc: linux-kernel@vger.kernel.org +Cc: Philipp Zabel +Cc: Gabor Juhos +--- + include/linux/reset-controller.h | 16 ++++++++++++++ + include/linux/reset.h | 43 ++++++++++++++++++++++++++++++++++++++ + 2 files changed, 59 insertions(+) + +--- a/include/linux/reset-controller.h ++++ b/include/linux/reset-controller.h +@@ -48,7 +48,23 @@ struct reset_controller_dev { + unsigned int nr_resets; + }; + ++#if defined(CONFIG_RESET_CONTROLLER) ++ + int reset_controller_register(struct reset_controller_dev *rcdev); + void reset_controller_unregister(struct reset_controller_dev *rcdev); + ++#else ++ ++static inline int reset_controller_register(struct reset_controller_dev *rcdev) ++{ ++ return -ENOSYS; ++} ++ ++void reset_controller_unregister(struct reset_controller_dev *rcdev) ++{ ++ ++} ++ ++#endif ++ + #endif diff --git a/target/linux/lantiq/patches-4.1/0035-owrt-lantiq-wifi-and-ethernet-eeprom-handling.patch b/target/linux/lantiq/patches-4.1/0035-owrt-lantiq-wifi-and-ethernet-eeprom-handling.patch new file mode 100644 index 0000000000..04c2071f32 --- /dev/null +++ b/target/linux/lantiq/patches-4.1/0035-owrt-lantiq-wifi-and-ethernet-eeprom-handling.patch @@ -0,0 +1,614 @@ +From f8c5db89e793a4bc6c1e87bd7b3a5cec16b75bc3 Mon Sep 17 00:00:00 2001 +From: John Crispin +Date: Wed, 10 Sep 2014 22:42:14 +0200 +Subject: [PATCH 35/36] owrt: lantiq: wifi and ethernet eeprom handling + +Signed-off-by: John Crispin +--- + arch/mips/include/asm/mach-lantiq/pci-ath-fixup.h | 6 + + .../mips/include/asm/mach-lantiq/xway/lantiq_soc.h | 3 + + arch/mips/lantiq/xway/Makefile | 3 + + arch/mips/lantiq/xway/ath_eep.c | 282 ++++++++++++++++++++ + arch/mips/lantiq/xway/eth_mac.c | 76 ++++++ + arch/mips/lantiq/xway/pci-ath-fixup.c | 109 ++++++++ + arch/mips/lantiq/xway/rt_eep.c | 60 +++++ + 7 files changed, 539 insertions(+) + create mode 100644 arch/mips/include/asm/mach-lantiq/pci-ath-fixup.h + create mode 100644 arch/mips/lantiq/xway/ath_eep.c + create mode 100644 arch/mips/lantiq/xway/eth_mac.c + create mode 100644 arch/mips/lantiq/xway/pci-ath-fixup.c + create mode 100644 arch/mips/lantiq/xway/rt_eep.c + +--- /dev/null ++++ b/arch/mips/include/asm/mach-lantiq/pci-ath-fixup.h +@@ -0,0 +1,6 @@ ++#ifndef _PCI_ATH_FIXUP ++#define _PCI_ATH_FIXUP ++ ++void ltq_pci_ath_fixup(unsigned slot, u16 *cal_data) __init; ++ ++#endif /* _PCI_ATH_FIXUP */ +--- a/arch/mips/include/asm/mach-lantiq/xway/lantiq_soc.h ++++ b/arch/mips/include/asm/mach-lantiq/xway/lantiq_soc.h +@@ -90,5 +90,8 @@ int xrx200_gphy_boot(struct device *dev, + extern void ltq_pmu_enable(unsigned int module); + extern void ltq_pmu_disable(unsigned int module); + ++/* allow the ethernet driver to load a flash mapped mac addr */ ++const u8* ltq_get_eth_mac(void); ++ + #endif /* CONFIG_SOC_TYPE_XWAY */ + #endif /* _LTQ_XWAY_H__ */ +--- a/arch/mips/lantiq/xway/Makefile ++++ b/arch/mips/lantiq/xway/Makefile +@@ -2,4 +2,7 @@ obj-y := prom.o sysctrl.o clk.o reset.o + + obj-y += vmmc.o tffs.o + ++obj-y += eth_mac.o ++obj-$(CONFIG_PCI) += ath_eep.o rt_eep.o pci-ath-fixup.o ++ + obj-$(CONFIG_XRX200_PHY_FW) += xrx200_phy_fw.o +--- /dev/null ++++ b/arch/mips/lantiq/xway/ath_eep.c +@@ -0,0 +1,282 @@ ++/* ++ * Copyright (C) 2011 Luca Olivetti ++ * Copyright (C) 2011 John Crispin ++ * Copyright (C) 2011 Andrej VlaÅ¡ić ++ * Copyright (C) 2013 Álvaro Fernández Rojas ++ * Copyright (C) 2013 Daniel Gimpelevich ++ * ++ * This program is free software; you can redistribute it and/or modify it ++ * under the terms of the GNU General Public License version 2 as published ++ * by the Free Software Foundation. ++ */ ++ ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++ ++extern int (*ltq_pci_plat_dev_init)(struct pci_dev *dev); ++struct ath5k_platform_data ath5k_pdata; ++struct ath9k_platform_data ath9k_pdata = { ++ .led_pin = -1, ++}; ++static u8 athxk_eeprom_mac[6]; ++ ++static int ath9k_pci_plat_dev_init(struct pci_dev *dev) ++{ ++ dev->dev.platform_data = &ath9k_pdata; ++ return 0; ++} ++ ++static int ath9k_eep_load; ++int __init of_ath9k_eeprom_probe(struct platform_device *pdev) ++{ ++ struct device_node *np = pdev->dev.of_node, *mtd_np; ++ struct resource *eep_res, *mac_res = NULL; ++ void __iomem *eep, *mac; ++ int mac_offset, led_pin; ++ u32 mac_inc = 0, pci_slot = 0; ++ int i; ++ struct mtd_info *the_mtd; ++ size_t flash_readlen; ++ const __be32 *list; ++ const char *part; ++ phandle phandle; ++ ++ if ((list = of_get_property(np, "ath,eep-flash", &i)) && i == 2 * ++ sizeof(*list) && (phandle = be32_to_cpup(list++)) && ++ (mtd_np = of_find_node_by_phandle(phandle)) && ((part = ++ of_get_property(mtd_np, "label", NULL)) || (part = ++ mtd_np->name)) && (the_mtd = get_mtd_device_nm(part)) ++ != ERR_PTR(-ENODEV)) { ++ i = mtd_read(the_mtd, be32_to_cpup(list), ++ ATH9K_PLAT_EEP_MAX_WORDS << 1, &flash_readlen, ++ (void *) ath9k_pdata.eeprom_data); ++ if (!of_property_read_u32(np, "ath,mac-offset", &mac_offset)) { ++ size_t mac_readlen; ++ mtd_read(the_mtd, mac_offset, 6, &mac_readlen, ++ (void *) athxk_eeprom_mac); ++ } ++ put_mtd_device(the_mtd); ++ if ((sizeof(ath9k_pdata.eeprom_data) != flash_readlen) || i) { ++ dev_err(&pdev->dev, "failed to load eeprom from mtd\n"); ++ return -ENODEV; ++ } ++ } else { ++ eep_res = platform_get_resource(pdev, IORESOURCE_MEM, 0); ++ mac_res = platform_get_resource(pdev, IORESOURCE_MEM, 1); ++ ++ if (!eep_res) { ++ dev_err(&pdev->dev, "failed to load eeprom address\n"); ++ return -ENODEV; ++ } ++ if (resource_size(eep_res) != ATH9K_PLAT_EEP_MAX_WORDS << 1) { ++ dev_err(&pdev->dev, "eeprom has an invalid size\n"); ++ return -EINVAL; ++ } ++ ++ eep = ioremap(eep_res->start, resource_size(eep_res)); ++ memcpy_fromio(ath9k_pdata.eeprom_data, eep, ++ ATH9K_PLAT_EEP_MAX_WORDS << 1); ++ } ++ ++ if (of_find_property(np, "ath,eep-swap", NULL)) ++ for (i = 0; i < ATH9K_PLAT_EEP_MAX_WORDS; i++) ++ ath9k_pdata.eeprom_data[i] = swab16(ath9k_pdata.eeprom_data[i]); ++ ++ if (of_find_property(np, "ath,eep-endian", NULL)) { ++ ath9k_pdata.endian_check = true; ++ ++ dev_info(&pdev->dev, "endian check enabled.\n"); ++ } ++ ++ if (!is_valid_ether_addr(athxk_eeprom_mac)) { ++ if (mac_res) { ++ if (resource_size(mac_res) != 6) { ++ dev_err(&pdev->dev, "mac has an invalid size\n"); ++ return -EINVAL; ++ } ++ mac = ioremap(mac_res->start, resource_size(mac_res)); ++ memcpy_fromio(athxk_eeprom_mac, mac, 6); ++ } else if (ltq_get_eth_mac()) { ++ memcpy(athxk_eeprom_mac, ltq_get_eth_mac(), 6); ++ } ++ } ++ if (!is_valid_ether_addr(athxk_eeprom_mac)) { ++ dev_warn(&pdev->dev, "using random mac\n"); ++ random_ether_addr(athxk_eeprom_mac); ++ } ++ ++ if (!of_property_read_u32(np, "ath,mac-increment", &mac_inc)) ++ athxk_eeprom_mac[5] += mac_inc; ++ ++ ath9k_pdata.macaddr = athxk_eeprom_mac; ++ ltq_pci_plat_dev_init = ath9k_pci_plat_dev_init; ++ ++ if (!of_property_read_u32(np, "ath,pci-slot", &pci_slot)) { ++ ltq_pci_ath_fixup(pci_slot, ath9k_pdata.eeprom_data); ++ ++ dev_info(&pdev->dev, "pci slot: %u\n", pci_slot); ++ if (ath9k_eep_load) { ++ struct pci_dev *d = NULL; ++ while ((d = pci_get_device(PCI_VENDOR_ID_ATHEROS, ++ PCI_ANY_ID, d)) != NULL) ++ pci_fixup_device(pci_fixup_early, d); ++ } ++ ++ } ++ ++ if (!of_property_read_u32(np, "ath,led-pin", &led_pin)) { ++ ath9k_pdata.led_pin = led_pin; ++ dev_info(&pdev->dev, "using led pin %d.\n", led_pin); ++ } ++ ++ dev_info(&pdev->dev, "loaded ath9k eeprom\n"); ++ ++ return 0; ++} ++ ++static struct of_device_id ath9k_eeprom_ids[] = { ++ { .compatible = "ath9k,eeprom" }, ++ { } ++}; ++ ++static struct platform_driver ath9k_eeprom_driver = { ++ .driver = { ++ .name = "ath9k,eeprom", ++ .owner = THIS_MODULE, ++ .of_match_table = of_match_ptr(ath9k_eeprom_ids), ++ }, ++}; ++ ++static int __init of_ath9k_eeprom_init(void) ++{ ++ int ret = platform_driver_probe(&ath9k_eeprom_driver, of_ath9k_eeprom_probe); ++ ++ if (ret) ++ ath9k_eep_load = 1; ++ ++ return ret; ++} ++ ++static int __init of_ath9k_eeprom_init_late(void) ++{ ++ if (!ath9k_eep_load) ++ return 0; ++ return platform_driver_probe(&ath9k_eeprom_driver, of_ath9k_eeprom_probe); ++} ++late_initcall(of_ath9k_eeprom_init_late); ++subsys_initcall(of_ath9k_eeprom_init); ++ ++ ++static int ath5k_pci_plat_dev_init(struct pci_dev *dev) ++{ ++ dev->dev.platform_data = &ath5k_pdata; ++ return 0; ++} ++ ++int __init of_ath5k_eeprom_probe(struct platform_device *pdev) ++{ ++ struct device_node *np = pdev->dev.of_node, *mtd_np; ++ struct resource *eep_res, *mac_res = NULL; ++ void __iomem *eep, *mac; ++ int mac_offset; ++ u32 mac_inc = 0; ++ int i; ++ struct mtd_info *the_mtd; ++ size_t flash_readlen; ++ const __be32 *list; ++ const char *part; ++ phandle phandle; ++ ++ if ((list = of_get_property(np, "ath,eep-flash", &i)) && i == 2 * ++ sizeof(*list) && (phandle = be32_to_cpup(list++)) && ++ (mtd_np = of_find_node_by_phandle(phandle)) && ((part = ++ of_get_property(mtd_np, "label", NULL)) || (part = ++ mtd_np->name)) && (the_mtd = get_mtd_device_nm(part)) ++ != ERR_PTR(-ENODEV)) { ++ i = mtd_read(the_mtd, be32_to_cpup(list), ++ ATH5K_PLAT_EEP_MAX_WORDS << 1, &flash_readlen, ++ (void *) ath5k_pdata.eeprom_data); ++ put_mtd_device(the_mtd); ++ if ((sizeof(ATH5K_PLAT_EEP_MAX_WORDS << 1) != flash_readlen) ++ || i) { ++ dev_err(&pdev->dev, "failed to load eeprom from mtd\n"); ++ return -ENODEV; ++ } ++ } else { ++ eep_res = platform_get_resource(pdev, IORESOURCE_MEM, 0); ++ mac_res = platform_get_resource(pdev, IORESOURCE_MEM, 1); ++ ++ if (!eep_res) { ++ dev_err(&pdev->dev, "failed to load eeprom address\n"); ++ return -ENODEV; ++ } ++ if (resource_size(eep_res) != ATH5K_PLAT_EEP_MAX_WORDS << 1) { ++ dev_err(&pdev->dev, "eeprom has an invalid size\n"); ++ return -EINVAL; ++ } ++ ++ eep = ioremap(eep_res->start, resource_size(eep_res)); ++ ath5k_pdata.eeprom_data = kmalloc(ATH5K_PLAT_EEP_MAX_WORDS<<1, ++ GFP_KERNEL); ++ memcpy_fromio(ath5k_pdata.eeprom_data, eep, ++ ATH5K_PLAT_EEP_MAX_WORDS << 1); ++ } ++ ++ if (of_find_property(np, "ath,eep-swap", NULL)) ++ for (i = 0; i < ATH5K_PLAT_EEP_MAX_WORDS; i++) ++ ath5k_pdata.eeprom_data[i] = swab16(ath5k_pdata.eeprom_data[i]); ++ ++ if (!of_property_read_u32(np, "ath,mac-offset", &mac_offset)) { ++ memcpy_fromio(athxk_eeprom_mac, (void*) ath5k_pdata.eeprom_data + mac_offset, 6); ++ } else if (mac_res) { ++ if (resource_size(mac_res) != 6) { ++ dev_err(&pdev->dev, "mac has an invalid size\n"); ++ return -EINVAL; ++ } ++ mac = ioremap(mac_res->start, resource_size(mac_res)); ++ memcpy_fromio(athxk_eeprom_mac, mac, 6); ++ } else if (ltq_get_eth_mac()) ++ memcpy(athxk_eeprom_mac, ltq_get_eth_mac(), 6); ++ else { ++ dev_warn(&pdev->dev, "using random mac\n"); ++ random_ether_addr(athxk_eeprom_mac); ++ } ++ ++ if (!of_property_read_u32(np, "ath,mac-increment", &mac_inc)) ++ athxk_eeprom_mac[5] += mac_inc; ++ ++ ath5k_pdata.macaddr = athxk_eeprom_mac; ++ ltq_pci_plat_dev_init = ath5k_pci_plat_dev_init; ++ ++ dev_info(&pdev->dev, "loaded ath5k eeprom\n"); ++ ++ return 0; ++} ++ ++static struct of_device_id ath5k_eeprom_ids[] = { ++ { .compatible = "ath5k,eeprom" }, ++ { } ++}; ++ ++static struct platform_driver ath5k_eeprom_driver = { ++ .driver = { ++ .name = "ath5k,eeprom", ++ .owner = THIS_MODULE, ++ .of_match_table = of_match_ptr(ath5k_eeprom_ids), ++ }, ++}; ++ ++static int __init of_ath5k_eeprom_init(void) ++{ ++ return platform_driver_probe(&ath5k_eeprom_driver, of_ath5k_eeprom_probe); ++} ++device_initcall(of_ath5k_eeprom_init); +--- /dev/null ++++ b/arch/mips/lantiq/xway/eth_mac.c +@@ -0,0 +1,76 @@ ++/* ++ * Copyright (C) 2012 John Crispin ++ * ++ * This program is free software; you can redistribute it and/or modify it ++ * under the terms of the GNU General Public License version 2 as published ++ * by the Free Software Foundation. ++ */ ++ ++#include ++#include ++#include ++#include ++ ++static u8 eth_mac[6]; ++static int eth_mac_set; ++ ++const u8* ltq_get_eth_mac(void) ++{ ++ return eth_mac; ++} ++ ++static int __init setup_ethaddr(char *str) ++{ ++ eth_mac_set = mac_pton(str, eth_mac); ++ return !eth_mac_set; ++} ++__setup("ethaddr=", setup_ethaddr); ++ ++int __init of_eth_mac_probe(struct platform_device *pdev) ++{ ++ struct device_node *np = pdev->dev.of_node; ++ struct resource *mac_res; ++ void __iomem *mac; ++ u32 mac_inc = 0; ++ ++ if (eth_mac_set) { ++ dev_err(&pdev->dev, "mac was already set by bootloader\n"); ++ return -EINVAL; ++ } ++ mac_res = platform_get_resource(pdev, IORESOURCE_MEM, 0); ++ ++ if (!mac_res) { ++ dev_err(&pdev->dev, "failed to load mac\n"); ++ return -EINVAL; ++ } ++ if (resource_size(mac_res) != 6) { ++ dev_err(&pdev->dev, "mac has an invalid size\n"); ++ return -EINVAL; ++ } ++ mac = ioremap(mac_res->start, resource_size(mac_res)); ++ memcpy_fromio(eth_mac, mac, 6); ++ ++ if (!of_property_read_u32(np, "mac-increment", &mac_inc)) ++ eth_mac[5] += mac_inc; ++ ++ return 0; ++} ++ ++static struct of_device_id eth_mac_ids[] = { ++ { .compatible = "lantiq,eth-mac" }, ++ { /* sentinel */ } ++}; ++ ++static struct platform_driver eth_mac_driver = { ++ .driver = { ++ .name = "lantiq,eth-mac", ++ .owner = THIS_MODULE, ++ .of_match_table = of_match_ptr(eth_mac_ids), ++ }, ++}; ++ ++static int __init of_eth_mac_init(void) ++{ ++ return platform_driver_probe(ð_mac_driver, of_eth_mac_probe); ++} ++device_initcall(of_eth_mac_init); +--- /dev/null ++++ b/arch/mips/lantiq/xway/pci-ath-fixup.c +@@ -0,0 +1,109 @@ ++/* ++ * Atheros AP94 reference board PCI initialization ++ * ++ * Copyright (C) 2009-2010 Gabor Juhos ++ * ++ * This program is free software; you can redistribute it and/or modify it ++ * under the terms of the GNU General Public License version 2 as published ++ * by the Free Software Foundation. ++ */ ++ ++#include ++#include ++#include ++#include ++ ++#define LTQ_PCI_MEM_BASE 0x18000000 ++ ++struct ath_fixup { ++ u16 *cal_data; ++ unsigned slot; ++}; ++ ++static int ath_num_fixups; ++static struct ath_fixup ath_fixups[2]; ++ ++static void ath_pci_fixup(struct pci_dev *dev) ++{ ++ void __iomem *mem; ++ u16 *cal_data = NULL; ++ u16 cmd; ++ u32 bar0; ++ u32 val; ++ unsigned i; ++ ++ for (i = 0; i < ath_num_fixups; i++) { ++ if (ath_fixups[i].cal_data == NULL) ++ continue; ++ ++ if (ath_fixups[i].slot != PCI_SLOT(dev->devfn)) ++ continue; ++ ++ cal_data = ath_fixups[i].cal_data; ++ break; ++ } ++ ++ if (cal_data == NULL) ++ return; ++ ++ if (*cal_data != 0xa55a) { ++ pr_err("pci %s: invalid calibration data\n", pci_name(dev)); ++ return; ++ } ++ ++ pr_info("pci %s: fixup device configuration\n", pci_name(dev)); ++ ++ mem = ioremap(LTQ_PCI_MEM_BASE, 0x10000); ++ if (!mem) { ++ pr_err("pci %s: ioremap error\n", pci_name(dev)); ++ return; ++ } ++ ++ pci_read_config_dword(dev, PCI_BASE_ADDRESS_0, &bar0); ++ pci_write_config_dword(dev, PCI_BASE_ADDRESS_0, LTQ_PCI_MEM_BASE); ++ pci_read_config_word(dev, PCI_COMMAND, &cmd); ++ cmd |= PCI_COMMAND_MASTER | PCI_COMMAND_MEMORY; ++ pci_write_config_word(dev, PCI_COMMAND, cmd); ++ ++ /* set pointer to first reg address */ ++ cal_data += 3; ++ while (*cal_data != 0xffff) { ++ u32 reg; ++ reg = *cal_data++; ++ val = *cal_data++; ++ val |= (*cal_data++) << 16; ++ ++ ltq_w32(swab32(val), mem + reg); ++ udelay(100); ++ } ++ ++ pci_read_config_dword(dev, PCI_VENDOR_ID, &val); ++ dev->vendor = val & 0xffff; ++ dev->device = (val >> 16) & 0xffff; ++ ++ pci_read_config_dword(dev, PCI_CLASS_REVISION, &val); ++ dev->revision = val & 0xff; ++ dev->class = val >> 8; /* upper 3 bytes */ ++ ++ pr_info("pci %s: fixup info: [%04x:%04x] revision %02x class %#08x\n", ++ pci_name(dev), dev->vendor, dev->device, dev->revision, dev->class); ++ ++ pci_read_config_word(dev, PCI_COMMAND, &cmd); ++ cmd &= ~(PCI_COMMAND_MASTER | PCI_COMMAND_MEMORY); ++ pci_write_config_word(dev, PCI_COMMAND, cmd); ++ ++ pci_write_config_dword(dev, PCI_BASE_ADDRESS_0, bar0); ++ ++ iounmap(mem); ++} ++DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_ATHEROS, PCI_ANY_ID, ath_pci_fixup); ++ ++void __init ltq_pci_ath_fixup(unsigned slot, u16 *cal_data) ++{ ++ if (ath_num_fixups >= ARRAY_SIZE(ath_fixups)) ++ return; ++ ++ ath_fixups[ath_num_fixups].slot = slot; ++ ath_fixups[ath_num_fixups].cal_data = cal_data; ++ ath_num_fixups++; ++} +--- /dev/null ++++ b/arch/mips/lantiq/xway/rt_eep.c +@@ -0,0 +1,60 @@ ++/* ++ * Copyright (C) 2011 John Crispin ++ * ++ * This program is free software; you can redistribute it and/or modify it ++ * under the terms of the GNU General Public License version 2 as published ++ * by the Free Software Foundation. ++ */ ++ ++#include ++#include ++#include ++#include ++#include ++ ++extern int (*ltq_pci_plat_dev_init)(struct pci_dev *dev); ++static struct rt2x00_platform_data rt2x00_pdata; ++ ++static int rt2x00_pci_plat_dev_init(struct pci_dev *dev) ++{ ++ dev->dev.platform_data = &rt2x00_pdata; ++ return 0; ++} ++ ++int __init of_ralink_eeprom_probe(struct platform_device *pdev) ++{ ++ struct device_node *np = pdev->dev.of_node; ++ const char *eeprom; ++ ++ if (of_property_read_string(np, "ralink,eeprom", &eeprom)) { ++ dev_err(&pdev->dev, "failed to load eeprom filename\n"); ++ return 0; ++ } ++ ++ rt2x00_pdata.eeprom_file_name = kstrdup(eeprom, GFP_KERNEL); ++// rt2x00_pdata.mac_address = mac; ++ ltq_pci_plat_dev_init = rt2x00_pci_plat_dev_init; ++ ++ dev_info(&pdev->dev, "using %s as eeprom\n", eeprom); ++ ++ return 0; ++} ++ ++static struct of_device_id ralink_eeprom_ids[] = { ++ { .compatible = "ralink,eeprom" }, ++ { } ++}; ++ ++static struct platform_driver ralink_eeprom_driver = { ++ .driver = { ++ .name = "ralink,eeprom", ++ .owner = THIS_MODULE, ++ .of_match_table = of_match_ptr(ralink_eeprom_ids), ++ }, ++}; ++ ++static int __init of_ralink_eeprom_init(void) ++{ ++ return platform_driver_probe(&ralink_eeprom_driver, of_ralink_eeprom_probe); ++} ++device_initcall(of_ralink_eeprom_init); +--- a/drivers/net/ethernet/lantiq_etop.c ++++ b/drivers/net/ethernet/lantiq_etop.c +@@ -161,7 +161,7 @@ struct ltq_etop_priv { + int tx_irq; + int rx_irq; + +- const void *mac; ++ void *mac; + int mii_mode; + + spinlock_t lock; +@@ -840,7 +840,11 @@ ltq_etop_init(struct net_device *dev) + if (err) + goto err_hw; + +- memcpy(&mac, &priv->pldata->mac, sizeof(struct sockaddr)); ++ if (priv->mac) ++ memcpy(&mac.sa_data, priv->mac, ETH_ALEN); ++ else ++ memcpy(&mac.sa_data, ltq_get_eth_mac(), ETH_ALEN); ++ + if (!is_valid_ether_addr(mac.sa_data)) { + pr_warn("etop: invalid MAC, using random\n"); + eth_random_addr(mac.sa_data); diff --git a/target/linux/lantiq/patches-4.1/0036-owrt-generic-dtb-image-hack.patch b/target/linux/lantiq/patches-4.1/0036-owrt-generic-dtb-image-hack.patch new file mode 100644 index 0000000000..7a306b301e --- /dev/null +++ b/target/linux/lantiq/patches-4.1/0036-owrt-generic-dtb-image-hack.patch @@ -0,0 +1,32 @@ +From dba8578e06aedf1e67312ebfc6162e2fadc9448d Mon Sep 17 00:00:00 2001 +From: John Crispin +Date: Thu, 7 Aug 2014 18:32:12 +0200 +Subject: [PATCH 36/36] owrt: generic dtb image hack + +Signed-off-by: John Crispin +--- + arch/mips/kernel/head.S | 3 +++ + 1 file changed, 3 insertions(+) + +--- a/arch/mips/kernel/head.S ++++ b/arch/mips/kernel/head.S +@@ -86,6 +86,9 @@ EXPORT(__image_cmdline) + .fill 0x400 + #endif /* CONFIG_IMAGE_CMDLINE_HACK */ + ++ .ascii "OWRTDTB:" ++ EXPORT(__image_dtb) ++ .fill 0x4000 + __REF + + NESTED(kernel_entry, 16, sp) # kernel entry point +--- a/arch/mips/lantiq/Kconfig ++++ b/arch/mips/lantiq/Kconfig +@@ -32,7 +32,6 @@ choice + config DT_EASY50712 + bool "Easy50712" + depends on SOC_XWAY +- select BUILTIN_DTB + endchoice + + config PCI_LANTIQ diff --git a/target/linux/lantiq/patches-4.1/0038-MIPS-lantiq-fpi-on-ar9.patch b/target/linux/lantiq/patches-4.1/0038-MIPS-lantiq-fpi-on-ar9.patch new file mode 100644 index 0000000000..5fbe0a1137 --- /dev/null +++ b/target/linux/lantiq/patches-4.1/0038-MIPS-lantiq-fpi-on-ar9.patch @@ -0,0 +1,21 @@ +Return correct value for fpi clock on ar9. + +Signed-off-by: Ben Mulvihill +--- + arch/mips/lantiq/xway/clk.c | 5 +++-- + 1 file changed, 3 insertions(+), 2 deletions(-) + +--- a/arch/mips/lantiq/xway/clk.c ++++ b/arch/mips/lantiq/xway/clk.c +@@ -87,8 +87,9 @@ unsigned long ltq_ar9_fpi_hz(void) + unsigned long sys = ltq_ar9_sys_hz(); + + if (ltq_cgu_r32(CGU_SYS) & BIT(0)) +- return sys; +- return sys >> 1; ++ return sys / 3; ++ else ++ return sys / 2; + } + + unsigned long ltq_ar9_cpu_hz(void) diff --git a/target/linux/lantiq/patches-4.1/0039-MIPS-lantiq-initialize-usb-on-boot.patch b/target/linux/lantiq/patches-4.1/0039-MIPS-lantiq-initialize-usb-on-boot.patch new file mode 100644 index 0000000000..052e45e91b --- /dev/null +++ b/target/linux/lantiq/patches-4.1/0039-MIPS-lantiq-initialize-usb-on-boot.patch @@ -0,0 +1,96 @@ +--- a/arch/mips/lantiq/xway/reset.c ++++ b/arch/mips/lantiq/xway/reset.c +@@ -44,6 +44,37 @@ + #define RCU_BOOT_SEL(x) ((x >> 18) & 0x7) + #define RCU_BOOT_SEL_XRX200(x) (((x >> 17) & 0xf) | ((x >> 8) & 0x10)) + ++/* dwc2 USB configuration registers */ ++#define RCU_USB1CFG 0x0018 ++#define RCU_USB2CFG 0x0034 ++ ++/* USB DMA endianness bits */ ++#define RCU_USBCFG_HDSEL_BIT BIT(11) ++#define RCU_USBCFG_HOST_END_BIT BIT(10) ++#define RCU_USBCFG_SLV_END_BIT BIT(9) ++ ++/* USB reset bits */ ++#define RCU_USBRESET 0x0010 ++ ++#define USBRESET_BIT BIT(4) ++ ++#define RCU_USBRESET2 0x0048 ++ ++#define USB1RESET_BIT BIT(4) ++#define USB2RESET_BIT BIT(5) ++ ++#define RCU_CFG1A 0x0038 ++#define RCU_CFG1B 0x003C ++ ++/* USB PMU devices */ ++#define PMU_AHBM BIT(15) ++#define PMU_USB0 BIT(6) ++#define PMU_USB1 BIT(27) ++ ++/* USB PHY PMU devices */ ++#define PMU_USB0_P BIT(0) ++#define PMU_USB1_P BIT(26) ++ + /* remapped base addr of the reset control unit */ + static void __iomem *ltq_rcu_membase; + static struct device_node *ltq_rcu_np; +@@ -200,6 +231,45 @@ static void ltq_machine_power_off(void) + unreachable(); + } + ++static void ltq_usb_init(void) ++{ ++ /* Power for USB cores 1 & 2 */ ++ ltq_pmu_enable(PMU_AHBM); ++ ltq_pmu_enable(PMU_USB0); ++ ltq_pmu_enable(PMU_USB1); ++ ++ ltq_rcu_w32(ltq_rcu_r32(RCU_CFG1A) | BIT(0), RCU_CFG1A); ++ ltq_rcu_w32(ltq_rcu_r32(RCU_CFG1B) | BIT(0), RCU_CFG1B); ++ ++ /* Enable USB PHY power for cores 1 & 2 */ ++ ltq_pmu_enable(PMU_USB0_P); ++ ltq_pmu_enable(PMU_USB1_P); ++ ++ /* Configure cores to host mode */ ++ ltq_rcu_w32(ltq_rcu_r32(RCU_USB1CFG) & ~RCU_USBCFG_HDSEL_BIT, ++ RCU_USB1CFG); ++ ltq_rcu_w32(ltq_rcu_r32(RCU_USB2CFG) & ~RCU_USBCFG_HDSEL_BIT, ++ RCU_USB2CFG); ++ ++ /* Select DMA endianness (Host-endian: big-endian) */ ++ ltq_rcu_w32((ltq_rcu_r32(RCU_USB1CFG) & ~RCU_USBCFG_SLV_END_BIT) ++ | RCU_USBCFG_HOST_END_BIT, RCU_USB1CFG); ++ ltq_rcu_w32(ltq_rcu_r32((RCU_USB2CFG) & ~RCU_USBCFG_SLV_END_BIT) ++ | RCU_USBCFG_HOST_END_BIT, RCU_USB2CFG); ++ ++ /* Hard reset USB state machines */ ++ ltq_rcu_w32(ltq_rcu_r32(RCU_USBRESET) | USBRESET_BIT, RCU_USBRESET); ++ udelay(50 * 1000); ++ ltq_rcu_w32(ltq_rcu_r32(RCU_USBRESET) & ~USBRESET_BIT, RCU_USBRESET); ++ ++ /* Soft reset USB state machines */ ++ ltq_rcu_w32(ltq_rcu_r32(RCU_USBRESET2) ++ | USB1RESET_BIT | USB2RESET_BIT, RCU_USBRESET2); ++ udelay(50 * 1000); ++ ltq_rcu_w32(ltq_rcu_r32(RCU_USBRESET2) ++ & ~(USB1RESET_BIT | USB2RESET_BIT), RCU_USBRESET2); ++} ++ + static int __init mips_reboot_setup(void) + { + struct resource res; +@@ -223,6 +293,9 @@ static int __init mips_reboot_setup(void + if (!ltq_rcu_membase) + panic("Failed to remap core memory"); + ++ if (of_machine_is_compatible("lantiq,vr9")) ++ ltq_usb_init(); ++ + _machine_restart = ltq_machine_restart; + _machine_halt = ltq_machine_halt; + pm_power_off = ltq_machine_power_off; diff --git a/target/linux/lantiq/patches-4.1/0040-USB-DWC2-enable-usb-power-gpio.patch b/target/linux/lantiq/patches-4.1/0040-USB-DWC2-enable-usb-power-gpio.patch new file mode 100644 index 0000000000..9c6f11cb13 --- /dev/null +++ b/target/linux/lantiq/patches-4.1/0040-USB-DWC2-enable-usb-power-gpio.patch @@ -0,0 +1,35 @@ +--- a/drivers/usb/dwc2/platform.c ++++ b/drivers/usb/dwc2/platform.c +@@ -41,6 +41,7 @@ + #include + #include + #include ++#include + #include + + #include +@@ -161,6 +162,7 @@ static int dwc2_driver_probe(struct plat + struct usb_phy *uphy; + int retval; + int irq; ++ int gpio_count; + + match = of_match_device(dwc2_of_match_table, &dev->dev); + if (match && match->data) { +@@ -177,6 +179,16 @@ static int dwc2_driver_probe(struct plat + defparams.dma_desc_enable = 0; + } + ++ gpio_count = of_gpio_count(dev->dev.of_node); ++ while (gpio_count > 0) { ++ enum of_gpio_flags flags; ++ int gpio = of_get_gpio_flags(dev->dev.of_node, --gpio_count, &flags); ++ if (gpio_request(gpio, "usb")) ++ continue; ++ dev_info(&dev->dev, "requested GPIO %d\n", gpio); ++ gpio_direction_output(gpio, (flags & OF_GPIO_ACTIVE_LOW) ? (0) : (1)); ++ } ++ + hsotg = devm_kzalloc(&dev->dev, sizeof(*hsotg), GFP_KERNEL); + if (!hsotg) + return -ENOMEM; diff --git a/target/linux/lantiq/patches-4.1/0041-USB-DWC2-add-ltq-params.patch b/target/linux/lantiq/patches-4.1/0041-USB-DWC2-add-ltq-params.patch new file mode 100644 index 0000000000..850d7a8e6b --- /dev/null +++ b/target/linux/lantiq/patches-4.1/0041-USB-DWC2-add-ltq-params.patch @@ -0,0 +1,45 @@ +--- a/drivers/usb/dwc2/platform.c ++++ b/drivers/usb/dwc2/platform.c +@@ -107,6 +107,34 @@ static const struct dwc2_core_params par + .uframe_sched = -1, + }; + ++static const struct dwc2_core_params params_ltq = { ++ .otg_cap = -1, ++ .otg_ver = -1, ++ .dma_enable = -1, ++ .dma_desc_enable = -1, ++ .speed = -1, ++ .enable_dynamic_fifo = -1, ++ .en_multiple_tx_fifo = -1, ++ .host_rx_fifo_size = 240, /* 240 DWORDs */ ++ .host_nperio_tx_fifo_size = 240, /* 240 DWORDs */ ++ .host_perio_tx_fifo_size = 32, /* 32 DWORDs */ ++ .max_transfer_size = -1, ++ .max_packet_count = -1, ++ .host_channels = -1, ++ .phy_type = -1, ++ .phy_utmi_width = -1, ++ .phy_ulpi_ddr = -1, ++ .phy_ulpi_ext_vbus = -1, ++ .i2c_enable = -1, ++ .ulpi_fs_ls = -1, ++ .host_support_fs_ls_low_power = -1, ++ .host_ls_low_power_phy_clk = -1, ++ .ts_dline = -1, ++ .reload_ctl = -1, ++ .ahbcfg = -1, ++ .uframe_sched = -1, ++}; ++ + /** + * dwc2_driver_remove() - Called when the DWC_otg core is unregistered with the + * DWC_otg driver +@@ -133,6 +161,7 @@ static int dwc2_driver_remove(struct pla + static const struct of_device_id dwc2_of_match_table[] = { + { .compatible = "brcm,bcm2835-usb", .data = ¶ms_bcm2835 }, + { .compatible = "rockchip,rk3066-usb", .data = ¶ms_rk3066 }, ++ { .compatible = "lantiq,ifxhcd-xrx200-dwc2", .data = ¶ms_ltq }, + { .compatible = "snps,dwc2", .data = NULL }, + { .compatible = "samsung,s3c6400-hsotg", .data = NULL}, + {}, diff --git a/target/linux/lantiq/patches-4.1/0042-USB-DWC2-big-endian-support.patch b/target/linux/lantiq/patches-4.1/0042-USB-DWC2-big-endian-support.patch new file mode 100644 index 0000000000..2d8ccab2a5 --- /dev/null +++ b/target/linux/lantiq/patches-4.1/0042-USB-DWC2-big-endian-support.patch @@ -0,0 +1,3156 @@ +--- a/drivers/usb/dwc2/core.c ++++ b/drivers/usb/dwc2/core.c +@@ -67,10 +67,10 @@ static void dwc2_enable_common_interrupt + u32 intmsk; + + /* Clear any pending OTG Interrupts */ +- writel(0xffffffff, hsotg->regs + GOTGINT); ++ dwc2_writel(0xffffffff, hsotg->regs + GOTGINT); + + /* Clear any pending interrupts */ +- writel(0xffffffff, hsotg->regs + GINTSTS); ++ dwc2_writel(0xffffffff, hsotg->regs + GINTSTS); + + /* Enable the interrupts in the GINTMSK */ + intmsk = GINTSTS_MODEMIS | GINTSTS_OTGINT; +@@ -81,7 +81,7 @@ static void dwc2_enable_common_interrupt + intmsk |= GINTSTS_CONIDSTSCHNG | GINTSTS_WKUPINT | GINTSTS_USBSUSP | + GINTSTS_SESSREQINT; + +- writel(intmsk, hsotg->regs + GINTMSK); ++ dwc2_writel(intmsk, hsotg->regs + GINTMSK); + } + + /* +@@ -104,10 +104,10 @@ static void dwc2_init_fs_ls_pclk_sel(str + } + + dev_dbg(hsotg->dev, "Initializing HCFG.FSLSPClkSel to %08x\n", val); +- hcfg = readl(hsotg->regs + HCFG); ++ hcfg = dwc2_readl(hsotg->regs + HCFG); + hcfg &= ~HCFG_FSLSPCLKSEL_MASK; + hcfg |= val << HCFG_FSLSPCLKSEL_SHIFT; +- writel(hcfg, hsotg->regs + HCFG); ++ dwc2_writel(hcfg, hsotg->regs + HCFG); + } + + /* +@@ -125,7 +125,7 @@ static int dwc2_core_reset(struct dwc2_h + /* Wait for AHB master IDLE state */ + do { + usleep_range(20000, 40000); +- greset = readl(hsotg->regs + GRSTCTL); ++ greset = dwc2_readl(hsotg->regs + GRSTCTL); + if (++count > 50) { + dev_warn(hsotg->dev, + "%s() HANG! AHB Idle GRSTCTL=%0x\n", +@@ -137,10 +137,10 @@ static int dwc2_core_reset(struct dwc2_h + /* Core Soft Reset */ + count = 0; + greset |= GRSTCTL_CSFTRST; +- writel(greset, hsotg->regs + GRSTCTL); ++ dwc2_writel(greset, hsotg->regs + GRSTCTL); + do { + usleep_range(20000, 40000); +- greset = readl(hsotg->regs + GRSTCTL); ++ greset = dwc2_readl(hsotg->regs + GRSTCTL); + if (++count > 50) { + dev_warn(hsotg->dev, + "%s() HANG! Soft Reset GRSTCTL=%0x\n", +@@ -150,20 +150,20 @@ static int dwc2_core_reset(struct dwc2_h + } while (greset & GRSTCTL_CSFTRST); + + if (hsotg->dr_mode == USB_DR_MODE_HOST) { +- gusbcfg = readl(hsotg->regs + GUSBCFG); ++ gusbcfg = dwc2_readl(hsotg->regs + GUSBCFG); + gusbcfg &= ~GUSBCFG_FORCEDEVMODE; + gusbcfg |= GUSBCFG_FORCEHOSTMODE; +- writel(gusbcfg, hsotg->regs + GUSBCFG); ++ dwc2_writel(gusbcfg, hsotg->regs + GUSBCFG); + } else if (hsotg->dr_mode == USB_DR_MODE_PERIPHERAL) { +- gusbcfg = readl(hsotg->regs + GUSBCFG); ++ gusbcfg = dwc2_readl(hsotg->regs + GUSBCFG); + gusbcfg &= ~GUSBCFG_FORCEHOSTMODE; + gusbcfg |= GUSBCFG_FORCEDEVMODE; +- writel(gusbcfg, hsotg->regs + GUSBCFG); ++ dwc2_writel(gusbcfg, hsotg->regs + GUSBCFG); + } else if (hsotg->dr_mode == USB_DR_MODE_OTG) { +- gusbcfg = readl(hsotg->regs + GUSBCFG); ++ gusbcfg = dwc2_readl(hsotg->regs + GUSBCFG); + gusbcfg &= ~GUSBCFG_FORCEHOSTMODE; + gusbcfg &= ~GUSBCFG_FORCEDEVMODE; +- writel(gusbcfg, hsotg->regs + GUSBCFG); ++ dwc2_writel(gusbcfg, hsotg->regs + GUSBCFG); + } + + /* +@@ -186,9 +186,9 @@ static int dwc2_fs_phy_init(struct dwc2_ + */ + if (select_phy) { + dev_dbg(hsotg->dev, "FS PHY selected\n"); +- usbcfg = readl(hsotg->regs + GUSBCFG); ++ usbcfg = dwc2_readl(hsotg->regs + GUSBCFG); + usbcfg |= GUSBCFG_PHYSEL; +- writel(usbcfg, hsotg->regs + GUSBCFG); ++ dwc2_writel(usbcfg, hsotg->regs + GUSBCFG); + + /* Reset after a PHY select */ + retval = dwc2_core_reset(hsotg); +@@ -211,18 +211,18 @@ static int dwc2_fs_phy_init(struct dwc2_ + dev_dbg(hsotg->dev, "FS PHY enabling I2C\n"); + + /* Program GUSBCFG.OtgUtmiFsSel to I2C */ +- usbcfg = readl(hsotg->regs + GUSBCFG); ++ usbcfg = dwc2_readl(hsotg->regs + GUSBCFG); + usbcfg |= GUSBCFG_OTG_UTMI_FS_SEL; +- writel(usbcfg, hsotg->regs + GUSBCFG); ++ dwc2_writel(usbcfg, hsotg->regs + GUSBCFG); + + /* Program GI2CCTL.I2CEn */ +- i2cctl = readl(hsotg->regs + GI2CCTL); ++ i2cctl = dwc2_readl(hsotg->regs + GI2CCTL); + i2cctl &= ~GI2CCTL_I2CDEVADDR_MASK; + i2cctl |= 1 << GI2CCTL_I2CDEVADDR_SHIFT; + i2cctl &= ~GI2CCTL_I2CEN; +- writel(i2cctl, hsotg->regs + GI2CCTL); ++ dwc2_writel(i2cctl, hsotg->regs + GI2CCTL); + i2cctl |= GI2CCTL_I2CEN; +- writel(i2cctl, hsotg->regs + GI2CCTL); ++ dwc2_writel(i2cctl, hsotg->regs + GI2CCTL); + } + + return retval; +@@ -236,7 +236,7 @@ static int dwc2_hs_phy_init(struct dwc2_ + if (!select_phy) + return 0; + +- usbcfg = readl(hsotg->regs + GUSBCFG); ++ usbcfg = dwc2_readl(hsotg->regs + GUSBCFG); + + /* + * HS PHY parameters. These parameters are preserved during soft reset +@@ -264,7 +264,7 @@ static int dwc2_hs_phy_init(struct dwc2_ + break; + } + +- writel(usbcfg, hsotg->regs + GUSBCFG); ++ dwc2_writel(usbcfg, hsotg->regs + GUSBCFG); + + /* Reset after setting the PHY parameters */ + retval = dwc2_core_reset(hsotg); +@@ -299,15 +299,15 @@ static int dwc2_phy_init(struct dwc2_hso + hsotg->hw_params.fs_phy_type == GHWCFG2_FS_PHY_TYPE_DEDICATED && + hsotg->core_params->ulpi_fs_ls > 0) { + dev_dbg(hsotg->dev, "Setting ULPI FSLS\n"); +- usbcfg = readl(hsotg->regs + GUSBCFG); ++ usbcfg = dwc2_readl(hsotg->regs + GUSBCFG); + usbcfg |= GUSBCFG_ULPI_FS_LS; + usbcfg |= GUSBCFG_ULPI_CLK_SUSP_M; +- writel(usbcfg, hsotg->regs + GUSBCFG); ++ dwc2_writel(usbcfg, hsotg->regs + GUSBCFG); + } else { +- usbcfg = readl(hsotg->regs + GUSBCFG); ++ usbcfg = dwc2_readl(hsotg->regs + GUSBCFG); + usbcfg &= ~GUSBCFG_ULPI_FS_LS; + usbcfg &= ~GUSBCFG_ULPI_CLK_SUSP_M; +- writel(usbcfg, hsotg->regs + GUSBCFG); ++ dwc2_writel(usbcfg, hsotg->regs + GUSBCFG); + } + + return retval; +@@ -315,7 +315,7 @@ static int dwc2_phy_init(struct dwc2_hso + + static int dwc2_gahbcfg_init(struct dwc2_hsotg *hsotg) + { +- u32 ahbcfg = readl(hsotg->regs + GAHBCFG); ++ u32 ahbcfg = dwc2_readl(hsotg->regs + GAHBCFG); + + switch (hsotg->hw_params.arch) { + case GHWCFG2_EXT_DMA_ARCH: +@@ -354,7 +354,7 @@ static int dwc2_gahbcfg_init(struct dwc2 + if (hsotg->core_params->dma_enable > 0) + ahbcfg |= GAHBCFG_DMA_EN; + +- writel(ahbcfg, hsotg->regs + GAHBCFG); ++ dwc2_writel(ahbcfg, hsotg->regs + GAHBCFG); + + return 0; + } +@@ -363,7 +363,7 @@ static void dwc2_gusbcfg_init(struct dwc + { + u32 usbcfg; + +- usbcfg = readl(hsotg->regs + GUSBCFG); ++ usbcfg = dwc2_readl(hsotg->regs + GUSBCFG); + usbcfg &= ~(GUSBCFG_HNPCAP | GUSBCFG_SRPCAP); + + switch (hsotg->hw_params.op_mode) { +@@ -391,7 +391,7 @@ static void dwc2_gusbcfg_init(struct dwc + break; + } + +- writel(usbcfg, hsotg->regs + GUSBCFG); ++ dwc2_writel(usbcfg, hsotg->regs + GUSBCFG); + } + + /** +@@ -409,7 +409,7 @@ int dwc2_core_init(struct dwc2_hsotg *hs + + dev_dbg(hsotg->dev, "%s(%p)\n", __func__, hsotg); + +- usbcfg = readl(hsotg->regs + GUSBCFG); ++ usbcfg = dwc2_readl(hsotg->regs + GUSBCFG); + + /* Set ULPI External VBUS bit if needed */ + usbcfg &= ~GUSBCFG_ULPI_EXT_VBUS_DRV; +@@ -422,7 +422,7 @@ int dwc2_core_init(struct dwc2_hsotg *hs + if (hsotg->core_params->ts_dline > 0) + usbcfg |= GUSBCFG_TERMSELDLPULSE; + +- writel(usbcfg, hsotg->regs + GUSBCFG); ++ dwc2_writel(usbcfg, hsotg->regs + GUSBCFG); + + /* Reset the Controller */ + retval = dwc2_core_reset(hsotg); +@@ -448,11 +448,11 @@ int dwc2_core_init(struct dwc2_hsotg *hs + dwc2_gusbcfg_init(hsotg); + + /* Program the GOTGCTL register */ +- otgctl = readl(hsotg->regs + GOTGCTL); ++ otgctl = dwc2_readl(hsotg->regs + GOTGCTL); + otgctl &= ~GOTGCTL_OTGVER; + if (hsotg->core_params->otg_ver > 0) + otgctl |= GOTGCTL_OTGVER; +- writel(otgctl, hsotg->regs + GOTGCTL); ++ dwc2_writel(otgctl, hsotg->regs + GOTGCTL); + dev_dbg(hsotg->dev, "OTG VER PARAM: %d\n", hsotg->core_params->otg_ver); + + /* Clear the SRP success bit for FS-I2c */ +@@ -488,16 +488,16 @@ void dwc2_enable_host_interrupts(struct + dev_dbg(hsotg->dev, "%s()\n", __func__); + + /* Disable all interrupts */ +- writel(0, hsotg->regs + GINTMSK); +- writel(0, hsotg->regs + HAINTMSK); ++ dwc2_writel(0, hsotg->regs + GINTMSK); ++ dwc2_writel(0, hsotg->regs + HAINTMSK); + + /* Enable the common interrupts */ + dwc2_enable_common_interrupts(hsotg); + + /* Enable host mode interrupts without disturbing common interrupts */ +- intmsk = readl(hsotg->regs + GINTMSK); ++ intmsk = dwc2_readl(hsotg->regs + GINTMSK); + intmsk |= GINTSTS_DISCONNINT | GINTSTS_PRTINT | GINTSTS_HCHINT; +- writel(intmsk, hsotg->regs + GINTMSK); ++ dwc2_writel(intmsk, hsotg->regs + GINTMSK); + } + + /** +@@ -507,12 +507,12 @@ void dwc2_enable_host_interrupts(struct + */ + void dwc2_disable_host_interrupts(struct dwc2_hsotg *hsotg) + { +- u32 intmsk = readl(hsotg->regs + GINTMSK); ++ u32 intmsk = dwc2_readl(hsotg->regs + GINTMSK); + + /* Disable host mode interrupts without disturbing common interrupts */ + intmsk &= ~(GINTSTS_SOF | GINTSTS_PRTINT | GINTSTS_HCHINT | + GINTSTS_PTXFEMP | GINTSTS_NPTXFEMP); +- writel(intmsk, hsotg->regs + GINTMSK); ++ dwc2_writel(intmsk, hsotg->regs + GINTMSK); + } + + /* +@@ -592,36 +592,36 @@ static void dwc2_config_fifos(struct dwc + dwc2_calculate_dynamic_fifo(hsotg); + + /* Rx FIFO */ +- grxfsiz = readl(hsotg->regs + GRXFSIZ); ++ grxfsiz = dwc2_readl(hsotg->regs + GRXFSIZ); + dev_dbg(hsotg->dev, "initial grxfsiz=%08x\n", grxfsiz); + grxfsiz &= ~GRXFSIZ_DEPTH_MASK; + grxfsiz |= params->host_rx_fifo_size << + GRXFSIZ_DEPTH_SHIFT & GRXFSIZ_DEPTH_MASK; +- writel(grxfsiz, hsotg->regs + GRXFSIZ); +- dev_dbg(hsotg->dev, "new grxfsiz=%08x\n", readl(hsotg->regs + GRXFSIZ)); ++ dwc2_writel(grxfsiz, hsotg->regs + GRXFSIZ); ++ dev_dbg(hsotg->dev, "new grxfsiz=%08x\n", dwc2_readl(hsotg->regs + GRXFSIZ)); + + /* Non-periodic Tx FIFO */ + dev_dbg(hsotg->dev, "initial gnptxfsiz=%08x\n", +- readl(hsotg->regs + GNPTXFSIZ)); ++ dwc2_readl(hsotg->regs + GNPTXFSIZ)); + nptxfsiz = params->host_nperio_tx_fifo_size << + FIFOSIZE_DEPTH_SHIFT & FIFOSIZE_DEPTH_MASK; + nptxfsiz |= params->host_rx_fifo_size << + FIFOSIZE_STARTADDR_SHIFT & FIFOSIZE_STARTADDR_MASK; +- writel(nptxfsiz, hsotg->regs + GNPTXFSIZ); ++ dwc2_writel(nptxfsiz, hsotg->regs + GNPTXFSIZ); + dev_dbg(hsotg->dev, "new gnptxfsiz=%08x\n", +- readl(hsotg->regs + GNPTXFSIZ)); ++ dwc2_readl(hsotg->regs + GNPTXFSIZ)); + + /* Periodic Tx FIFO */ + dev_dbg(hsotg->dev, "initial hptxfsiz=%08x\n", +- readl(hsotg->regs + HPTXFSIZ)); ++ dwc2_readl(hsotg->regs + HPTXFSIZ)); + hptxfsiz = params->host_perio_tx_fifo_size << + FIFOSIZE_DEPTH_SHIFT & FIFOSIZE_DEPTH_MASK; + hptxfsiz |= (params->host_rx_fifo_size + + params->host_nperio_tx_fifo_size) << + FIFOSIZE_STARTADDR_SHIFT & FIFOSIZE_STARTADDR_MASK; +- writel(hptxfsiz, hsotg->regs + HPTXFSIZ); ++ dwc2_writel(hptxfsiz, hsotg->regs + HPTXFSIZ); + dev_dbg(hsotg->dev, "new hptxfsiz=%08x\n", +- readl(hsotg->regs + HPTXFSIZ)); ++ dwc2_readl(hsotg->regs + HPTXFSIZ)); + + if (hsotg->core_params->en_multiple_tx_fifo > 0 && + hsotg->hw_params.snpsid <= DWC2_CORE_REV_2_94a) { +@@ -629,14 +629,14 @@ static void dwc2_config_fifos(struct dwc + * Global DFIFOCFG calculation for Host mode - + * include RxFIFO, NPTXFIFO and HPTXFIFO + */ +- dfifocfg = readl(hsotg->regs + GDFIFOCFG); ++ dfifocfg = dwc2_readl(hsotg->regs + GDFIFOCFG); + dfifocfg &= ~GDFIFOCFG_EPINFOBASE_MASK; + dfifocfg |= (params->host_rx_fifo_size + + params->host_nperio_tx_fifo_size + + params->host_perio_tx_fifo_size) << + GDFIFOCFG_EPINFOBASE_SHIFT & + GDFIFOCFG_EPINFOBASE_MASK; +- writel(dfifocfg, hsotg->regs + GDFIFOCFG); ++ dwc2_writel(dfifocfg, hsotg->regs + GDFIFOCFG); + } + } + +@@ -657,14 +657,14 @@ void dwc2_core_host_init(struct dwc2_hso + dev_dbg(hsotg->dev, "%s(%p)\n", __func__, hsotg); + + /* Restart the Phy Clock */ +- writel(0, hsotg->regs + PCGCTL); ++ dwc2_writel(0, hsotg->regs + PCGCTL); + + /* Initialize Host Configuration Register */ + dwc2_init_fs_ls_pclk_sel(hsotg); + if (hsotg->core_params->speed == DWC2_SPEED_PARAM_FULL) { +- hcfg = readl(hsotg->regs + HCFG); ++ hcfg = dwc2_readl(hsotg->regs + HCFG); + hcfg |= HCFG_FSLSSUPP; +- writel(hcfg, hsotg->regs + HCFG); ++ dwc2_writel(hcfg, hsotg->regs + HCFG); + } + + /* +@@ -673,9 +673,9 @@ void dwc2_core_host_init(struct dwc2_hso + * and its value must not be changed during runtime. + */ + if (hsotg->core_params->reload_ctl > 0) { +- hfir = readl(hsotg->regs + HFIR); ++ hfir = dwc2_readl(hsotg->regs + HFIR); + hfir |= HFIR_RLDCTRL; +- writel(hfir, hsotg->regs + HFIR); ++ dwc2_writel(hfir, hsotg->regs + HFIR); + } + + if (hsotg->core_params->dma_desc_enable > 0) { +@@ -691,9 +691,9 @@ void dwc2_core_host_init(struct dwc2_hso + "falling back to buffer DMA mode.\n"); + hsotg->core_params->dma_desc_enable = 0; + } else { +- hcfg = readl(hsotg->regs + HCFG); ++ hcfg = dwc2_readl(hsotg->regs + HCFG); + hcfg |= HCFG_DESCDMA; +- writel(hcfg, hsotg->regs + HCFG); ++ dwc2_writel(hcfg, hsotg->regs + HCFG); + } + } + +@@ -702,18 +702,18 @@ void dwc2_core_host_init(struct dwc2_hso + + /* TODO - check this */ + /* Clear Host Set HNP Enable in the OTG Control Register */ +- otgctl = readl(hsotg->regs + GOTGCTL); ++ otgctl = dwc2_readl(hsotg->regs + GOTGCTL); + otgctl &= ~GOTGCTL_HSTSETHNPEN; +- writel(otgctl, hsotg->regs + GOTGCTL); ++ dwc2_writel(otgctl, hsotg->regs + GOTGCTL); + + /* Make sure the FIFOs are flushed */ + dwc2_flush_tx_fifo(hsotg, 0x10 /* all TX FIFOs */); + dwc2_flush_rx_fifo(hsotg); + + /* Clear Host Set HNP Enable in the OTG Control Register */ +- otgctl = readl(hsotg->regs + GOTGCTL); ++ otgctl = dwc2_readl(hsotg->regs + GOTGCTL); + otgctl &= ~GOTGCTL_HSTSETHNPEN; +- writel(otgctl, hsotg->regs + GOTGCTL); ++ dwc2_writel(otgctl, hsotg->regs + GOTGCTL); + + if (hsotg->core_params->dma_desc_enable <= 0) { + int num_channels, i; +@@ -722,25 +722,25 @@ void dwc2_core_host_init(struct dwc2_hso + /* Flush out any leftover queued requests */ + num_channels = hsotg->core_params->host_channels; + for (i = 0; i < num_channels; i++) { +- hcchar = readl(hsotg->regs + HCCHAR(i)); ++ hcchar = dwc2_readl(hsotg->regs + HCCHAR(i)); + hcchar &= ~HCCHAR_CHENA; + hcchar |= HCCHAR_CHDIS; + hcchar &= ~HCCHAR_EPDIR; +- writel(hcchar, hsotg->regs + HCCHAR(i)); ++ dwc2_writel(hcchar, hsotg->regs + HCCHAR(i)); + } + + /* Halt all channels to put them into a known state */ + for (i = 0; i < num_channels; i++) { + int count = 0; + +- hcchar = readl(hsotg->regs + HCCHAR(i)); ++ hcchar = dwc2_readl(hsotg->regs + HCCHAR(i)); + hcchar |= HCCHAR_CHENA | HCCHAR_CHDIS; + hcchar &= ~HCCHAR_EPDIR; +- writel(hcchar, hsotg->regs + HCCHAR(i)); ++ dwc2_writel(hcchar, hsotg->regs + HCCHAR(i)); + dev_dbg(hsotg->dev, "%s: Halt channel %d\n", + __func__, i); + do { +- hcchar = readl(hsotg->regs + HCCHAR(i)); ++ hcchar = dwc2_readl(hsotg->regs + HCCHAR(i)); + if (++count > 1000) { + dev_err(hsotg->dev, + "Unable to clear enable on channel %d\n", +@@ -761,7 +761,7 @@ void dwc2_core_host_init(struct dwc2_hso + !!(hprt0 & HPRT0_PWR)); + if (!(hprt0 & HPRT0_PWR)) { + hprt0 |= HPRT0_PWR; +- writel(hprt0, hsotg->regs + HPRT0); ++ dwc2_writel(hprt0, hsotg->regs + HPRT0); + } + } + +@@ -841,7 +841,7 @@ static void dwc2_hc_enable_slave_ints(st + break; + } + +- writel(hcintmsk, hsotg->regs + HCINTMSK(chan->hc_num)); ++ dwc2_writel(hcintmsk, hsotg->regs + HCINTMSK(chan->hc_num)); + if (dbg_hc(chan)) + dev_vdbg(hsotg->dev, "set HCINTMSK to %08x\n", hcintmsk); + } +@@ -878,7 +878,7 @@ static void dwc2_hc_enable_dma_ints(stru + } + } + +- writel(hcintmsk, hsotg->regs + HCINTMSK(chan->hc_num)); ++ dwc2_writel(hcintmsk, hsotg->regs + HCINTMSK(chan->hc_num)); + if (dbg_hc(chan)) + dev_vdbg(hsotg->dev, "set HCINTMSK to %08x\n", hcintmsk); + } +@@ -899,16 +899,16 @@ static void dwc2_hc_enable_ints(struct d + } + + /* Enable the top level host channel interrupt */ +- intmsk = readl(hsotg->regs + HAINTMSK); ++ intmsk = dwc2_readl(hsotg->regs + HAINTMSK); + intmsk |= 1 << chan->hc_num; +- writel(intmsk, hsotg->regs + HAINTMSK); ++ dwc2_writel(intmsk, hsotg->regs + HAINTMSK); + if (dbg_hc(chan)) + dev_vdbg(hsotg->dev, "set HAINTMSK to %08x\n", intmsk); + + /* Make sure host channel interrupts are enabled */ +- intmsk = readl(hsotg->regs + GINTMSK); ++ intmsk = dwc2_readl(hsotg->regs + GINTMSK); + intmsk |= GINTSTS_HCHINT; +- writel(intmsk, hsotg->regs + GINTMSK); ++ dwc2_writel(intmsk, hsotg->regs + GINTMSK); + if (dbg_hc(chan)) + dev_vdbg(hsotg->dev, "set GINTMSK to %08x\n", intmsk); + } +@@ -937,7 +937,7 @@ void dwc2_hc_init(struct dwc2_hsotg *hso + /* Clear old interrupt conditions for this host channel */ + hcintmsk = 0xffffffff; + hcintmsk &= ~HCINTMSK_RESERVED14_31; +- writel(hcintmsk, hsotg->regs + HCINT(hc_num)); ++ dwc2_writel(hcintmsk, hsotg->regs + HCINT(hc_num)); + + /* Enable channel interrupts required for this transfer */ + dwc2_hc_enable_ints(hsotg, chan); +@@ -954,7 +954,7 @@ void dwc2_hc_init(struct dwc2_hsotg *hso + hcchar |= HCCHAR_LSPDDEV; + hcchar |= chan->ep_type << HCCHAR_EPTYPE_SHIFT & HCCHAR_EPTYPE_MASK; + hcchar |= chan->max_packet << HCCHAR_MPS_SHIFT & HCCHAR_MPS_MASK; +- writel(hcchar, hsotg->regs + HCCHAR(hc_num)); ++ dwc2_writel(hcchar, hsotg->regs + HCCHAR(hc_num)); + if (dbg_hc(chan)) { + dev_vdbg(hsotg->dev, "set HCCHAR(%d) to %08x\n", + hc_num, hcchar); +@@ -1008,7 +1008,7 @@ void dwc2_hc_init(struct dwc2_hsotg *hso + } + } + +- writel(hcsplt, hsotg->regs + HCSPLT(hc_num)); ++ dwc2_writel(hcsplt, hsotg->regs + HCSPLT(hc_num)); + } + + /** +@@ -1060,14 +1060,14 @@ void dwc2_hc_halt(struct dwc2_hsotg *hso + u32 hcintmsk = HCINTMSK_CHHLTD; + + dev_vdbg(hsotg->dev, "dequeue/error\n"); +- writel(hcintmsk, hsotg->regs + HCINTMSK(chan->hc_num)); ++ dwc2_writel(hcintmsk, hsotg->regs + HCINTMSK(chan->hc_num)); + + /* + * Make sure no other interrupts besides halt are currently + * pending. Handling another interrupt could cause a crash due + * to the QTD and QH state. + */ +- writel(~hcintmsk, hsotg->regs + HCINT(chan->hc_num)); ++ dwc2_writel(~hcintmsk, hsotg->regs + HCINT(chan->hc_num)); + + /* + * Make sure the halt status is set to URB_DEQUEUE or AHB_ERR +@@ -1076,7 +1076,7 @@ void dwc2_hc_halt(struct dwc2_hsotg *hso + */ + chan->halt_status = halt_status; + +- hcchar = readl(hsotg->regs + HCCHAR(chan->hc_num)); ++ hcchar = dwc2_readl(hsotg->regs + HCCHAR(chan->hc_num)); + if (!(hcchar & HCCHAR_CHENA)) { + /* + * The channel is either already halted or it hasn't +@@ -1104,7 +1104,7 @@ void dwc2_hc_halt(struct dwc2_hsotg *hso + return; + } + +- hcchar = readl(hsotg->regs + HCCHAR(chan->hc_num)); ++ hcchar = dwc2_readl(hsotg->regs + HCCHAR(chan->hc_num)); + + /* No need to set the bit in DDMA for disabling the channel */ + /* TODO check it everywhere channel is disabled */ +@@ -1127,7 +1127,7 @@ void dwc2_hc_halt(struct dwc2_hsotg *hso + if (chan->ep_type == USB_ENDPOINT_XFER_CONTROL || + chan->ep_type == USB_ENDPOINT_XFER_BULK) { + dev_vdbg(hsotg->dev, "control/bulk\n"); +- nptxsts = readl(hsotg->regs + GNPTXSTS); ++ nptxsts = dwc2_readl(hsotg->regs + GNPTXSTS); + if ((nptxsts & TXSTS_QSPCAVAIL_MASK) == 0) { + dev_vdbg(hsotg->dev, "Disabling channel\n"); + hcchar &= ~HCCHAR_CHENA; +@@ -1135,7 +1135,7 @@ void dwc2_hc_halt(struct dwc2_hsotg *hso + } else { + if (dbg_perio()) + dev_vdbg(hsotg->dev, "isoc/intr\n"); +- hptxsts = readl(hsotg->regs + HPTXSTS); ++ hptxsts = dwc2_readl(hsotg->regs + HPTXSTS); + if ((hptxsts & TXSTS_QSPCAVAIL_MASK) == 0 || + hsotg->queuing_high_bandwidth) { + if (dbg_perio()) +@@ -1148,7 +1148,7 @@ void dwc2_hc_halt(struct dwc2_hsotg *hso + dev_vdbg(hsotg->dev, "DMA enabled\n"); + } + +- writel(hcchar, hsotg->regs + HCCHAR(chan->hc_num)); ++ dwc2_writel(hcchar, hsotg->regs + HCCHAR(chan->hc_num)); + chan->halt_status = halt_status; + + if (hcchar & HCCHAR_CHENA) { +@@ -1195,10 +1195,10 @@ void dwc2_hc_cleanup(struct dwc2_hsotg * + * Clear channel interrupt enables and any unhandled channel interrupt + * conditions + */ +- writel(0, hsotg->regs + HCINTMSK(chan->hc_num)); ++ dwc2_writel(0, hsotg->regs + HCINTMSK(chan->hc_num)); + hcintmsk = 0xffffffff; + hcintmsk &= ~HCINTMSK_RESERVED14_31; +- writel(hcintmsk, hsotg->regs + HCINT(chan->hc_num)); ++ dwc2_writel(hcintmsk, hsotg->regs + HCINT(chan->hc_num)); + } + + /** +@@ -1284,13 +1284,13 @@ static void dwc2_hc_write_packet(struct + if (((unsigned long)data_buf & 0x3) == 0) { + /* xfer_buf is DWORD aligned */ + for (i = 0; i < dword_count; i++, data_buf++) +- writel(*data_buf, data_fifo); ++ dwc2_writel(*data_buf, data_fifo); + } else { + /* xfer_buf is not DWORD aligned */ + for (i = 0; i < dword_count; i++, data_buf++) { + u32 data = data_buf[0] | data_buf[1] << 8 | + data_buf[2] << 16 | data_buf[3] << 24; +- writel(data, data_fifo); ++ dwc2_writel(data, data_fifo); + } + } + +@@ -1443,7 +1443,7 @@ void dwc2_hc_start_transfer(struct dwc2_ + hctsiz |= num_packets << TSIZ_PKTCNT_SHIFT & TSIZ_PKTCNT_MASK; + hctsiz |= chan->data_pid_start << TSIZ_SC_MC_PID_SHIFT & + TSIZ_SC_MC_PID_MASK; +- writel(hctsiz, hsotg->regs + HCTSIZ(chan->hc_num)); ++ dwc2_writel(hctsiz, hsotg->regs + HCTSIZ(chan->hc_num)); + if (dbg_hc(chan)) { + dev_vdbg(hsotg->dev, "Wrote %08x to HCTSIZ(%d)\n", + hctsiz, chan->hc_num); +@@ -1471,7 +1471,7 @@ void dwc2_hc_start_transfer(struct dwc2_ + } else { + dma_addr = chan->xfer_dma; + } +- writel((u32)dma_addr, hsotg->regs + HCDMA(chan->hc_num)); ++ dwc2_writel((u32)dma_addr, hsotg->regs + HCDMA(chan->hc_num)); + if (dbg_hc(chan)) + dev_vdbg(hsotg->dev, "Wrote %08lx to HCDMA(%d)\n", + (unsigned long)dma_addr, chan->hc_num); +@@ -1479,13 +1479,13 @@ void dwc2_hc_start_transfer(struct dwc2_ + + /* Start the split */ + if (chan->do_split) { +- u32 hcsplt = readl(hsotg->regs + HCSPLT(chan->hc_num)); ++ u32 hcsplt = dwc2_readl(hsotg->regs + HCSPLT(chan->hc_num)); + + hcsplt |= HCSPLT_SPLTENA; +- writel(hcsplt, hsotg->regs + HCSPLT(chan->hc_num)); ++ dwc2_writel(hcsplt, hsotg->regs + HCSPLT(chan->hc_num)); + } + +- hcchar = readl(hsotg->regs + HCCHAR(chan->hc_num)); ++ hcchar = dwc2_readl(hsotg->regs + HCCHAR(chan->hc_num)); + hcchar &= ~HCCHAR_MULTICNT_MASK; + hcchar |= chan->multi_count << HCCHAR_MULTICNT_SHIFT & + HCCHAR_MULTICNT_MASK; +@@ -1505,7 +1505,7 @@ void dwc2_hc_start_transfer(struct dwc2_ + (hcchar & HCCHAR_MULTICNT_MASK) >> + HCCHAR_MULTICNT_SHIFT); + +- writel(hcchar, hsotg->regs + HCCHAR(chan->hc_num)); ++ dwc2_writel(hcchar, hsotg->regs + HCCHAR(chan->hc_num)); + if (dbg_hc(chan)) + dev_vdbg(hsotg->dev, "Wrote %08x to HCCHAR(%d)\n", hcchar, + chan->hc_num); +@@ -1564,18 +1564,18 @@ void dwc2_hc_start_transfer_ddma(struct + dev_vdbg(hsotg->dev, " NTD: %d\n", chan->ntd - 1); + } + +- writel(hctsiz, hsotg->regs + HCTSIZ(chan->hc_num)); ++ dwc2_writel(hctsiz, hsotg->regs + HCTSIZ(chan->hc_num)); + + hc_dma = (u32)chan->desc_list_addr & HCDMA_DMA_ADDR_MASK; + + /* Always start from first descriptor */ + hc_dma &= ~HCDMA_CTD_MASK; +- writel(hc_dma, hsotg->regs + HCDMA(chan->hc_num)); ++ dwc2_writel(hc_dma, hsotg->regs + HCDMA(chan->hc_num)); + if (dbg_hc(chan)) + dev_vdbg(hsotg->dev, "Wrote %08x to HCDMA(%d)\n", + hc_dma, chan->hc_num); + +- hcchar = readl(hsotg->regs + HCCHAR(chan->hc_num)); ++ hcchar = dwc2_readl(hsotg->regs + HCCHAR(chan->hc_num)); + hcchar &= ~HCCHAR_MULTICNT_MASK; + hcchar |= chan->multi_count << HCCHAR_MULTICNT_SHIFT & + HCCHAR_MULTICNT_MASK; +@@ -1594,7 +1594,7 @@ void dwc2_hc_start_transfer_ddma(struct + (hcchar & HCCHAR_MULTICNT_MASK) >> + HCCHAR_MULTICNT_SHIFT); + +- writel(hcchar, hsotg->regs + HCCHAR(chan->hc_num)); ++ dwc2_writel(hcchar, hsotg->regs + HCCHAR(chan->hc_num)); + if (dbg_hc(chan)) + dev_vdbg(hsotg->dev, "Wrote %08x to HCCHAR(%d)\n", hcchar, + chan->hc_num); +@@ -1651,7 +1651,7 @@ int dwc2_hc_continue_transfer(struct dwc + * transfer completes, the extra requests for the channel will + * be flushed. + */ +- u32 hcchar = readl(hsotg->regs + HCCHAR(chan->hc_num)); ++ u32 hcchar = dwc2_readl(hsotg->regs + HCCHAR(chan->hc_num)); + + dwc2_hc_set_even_odd_frame(hsotg, chan, &hcchar); + hcchar |= HCCHAR_CHENA; +@@ -1659,7 +1659,7 @@ int dwc2_hc_continue_transfer(struct dwc + if (dbg_hc(chan)) + dev_vdbg(hsotg->dev, " IN xfer: hcchar = 0x%08x\n", + hcchar); +- writel(hcchar, hsotg->regs + HCCHAR(chan->hc_num)); ++ dwc2_writel(hcchar, hsotg->regs + HCCHAR(chan->hc_num)); + chan->requests++; + return 1; + } +@@ -1669,7 +1669,7 @@ int dwc2_hc_continue_transfer(struct dwc + if (chan->xfer_count < chan->xfer_len) { + if (chan->ep_type == USB_ENDPOINT_XFER_INT || + chan->ep_type == USB_ENDPOINT_XFER_ISOC) { +- u32 hcchar = readl(hsotg->regs + ++ u32 hcchar = dwc2_readl(hsotg->regs + + HCCHAR(chan->hc_num)); + + dwc2_hc_set_even_odd_frame(hsotg, chan, +@@ -1706,12 +1706,12 @@ void dwc2_hc_do_ping(struct dwc2_hsotg * + + hctsiz = TSIZ_DOPNG; + hctsiz |= 1 << TSIZ_PKTCNT_SHIFT; +- writel(hctsiz, hsotg->regs + HCTSIZ(chan->hc_num)); ++ dwc2_writel(hctsiz, hsotg->regs + HCTSIZ(chan->hc_num)); + +- hcchar = readl(hsotg->regs + HCCHAR(chan->hc_num)); ++ hcchar = dwc2_readl(hsotg->regs + HCCHAR(chan->hc_num)); + hcchar |= HCCHAR_CHENA; + hcchar &= ~HCCHAR_CHDIS; +- writel(hcchar, hsotg->regs + HCCHAR(chan->hc_num)); ++ dwc2_writel(hcchar, hsotg->regs + HCCHAR(chan->hc_num)); + } + + /** +@@ -1730,8 +1730,8 @@ u32 dwc2_calc_frame_interval(struct dwc2 + u32 hprt0; + int clock = 60; /* default value */ + +- usbcfg = readl(hsotg->regs + GUSBCFG); +- hprt0 = readl(hsotg->regs + HPRT0); ++ usbcfg = dwc2_readl(hsotg->regs + GUSBCFG); ++ hprt0 = dwc2_readl(hsotg->regs + HPRT0); + + if (!(usbcfg & GUSBCFG_PHYSEL) && (usbcfg & GUSBCFG_ULPI_UTMI_SEL) && + !(usbcfg & GUSBCFG_PHYIF16)) +@@ -1787,7 +1787,7 @@ void dwc2_read_packet(struct dwc2_hsotg + dev_vdbg(hsotg->dev, "%s(%p,%p,%d)\n", __func__, hsotg, dest, bytes); + + for (i = 0; i < word_count; i++, data_buf++) +- *data_buf = readl(fifo); ++ *data_buf = dwc2_readl(fifo); + } + + /** +@@ -1807,56 +1807,56 @@ void dwc2_dump_host_registers(struct dwc + dev_dbg(hsotg->dev, "Host Global Registers\n"); + addr = hsotg->regs + HCFG; + dev_dbg(hsotg->dev, "HCFG @0x%08lX : 0x%08X\n", +- (unsigned long)addr, readl(addr)); ++ (unsigned long)addr, dwc2_readl(addr)); + addr = hsotg->regs + HFIR; + dev_dbg(hsotg->dev, "HFIR @0x%08lX : 0x%08X\n", +- (unsigned long)addr, readl(addr)); ++ (unsigned long)addr, dwc2_readl(addr)); + addr = hsotg->regs + HFNUM; + dev_dbg(hsotg->dev, "HFNUM @0x%08lX : 0x%08X\n", +- (unsigned long)addr, readl(addr)); ++ (unsigned long)addr, dwc2_readl(addr)); + addr = hsotg->regs + HPTXSTS; + dev_dbg(hsotg->dev, "HPTXSTS @0x%08lX : 0x%08X\n", +- (unsigned long)addr, readl(addr)); ++ (unsigned long)addr, dwc2_readl(addr)); + addr = hsotg->regs + HAINT; + dev_dbg(hsotg->dev, "HAINT @0x%08lX : 0x%08X\n", +- (unsigned long)addr, readl(addr)); ++ (unsigned long)addr, dwc2_readl(addr)); + addr = hsotg->regs + HAINTMSK; + dev_dbg(hsotg->dev, "HAINTMSK @0x%08lX : 0x%08X\n", +- (unsigned long)addr, readl(addr)); ++ (unsigned long)addr, dwc2_readl(addr)); + if (hsotg->core_params->dma_desc_enable > 0) { + addr = hsotg->regs + HFLBADDR; + dev_dbg(hsotg->dev, "HFLBADDR @0x%08lX : 0x%08X\n", +- (unsigned long)addr, readl(addr)); ++ (unsigned long)addr, dwc2_readl(addr)); + } + + addr = hsotg->regs + HPRT0; + dev_dbg(hsotg->dev, "HPRT0 @0x%08lX : 0x%08X\n", +- (unsigned long)addr, readl(addr)); ++ (unsigned long)addr, dwc2_readl(addr)); + + for (i = 0; i < hsotg->core_params->host_channels; i++) { + dev_dbg(hsotg->dev, "Host Channel %d Specific Registers\n", i); + addr = hsotg->regs + HCCHAR(i); + dev_dbg(hsotg->dev, "HCCHAR @0x%08lX : 0x%08X\n", +- (unsigned long)addr, readl(addr)); ++ (unsigned long)addr, dwc2_readl(addr)); + addr = hsotg->regs + HCSPLT(i); + dev_dbg(hsotg->dev, "HCSPLT @0x%08lX : 0x%08X\n", +- (unsigned long)addr, readl(addr)); ++ (unsigned long)addr, dwc2_readl(addr)); + addr = hsotg->regs + HCINT(i); + dev_dbg(hsotg->dev, "HCINT @0x%08lX : 0x%08X\n", +- (unsigned long)addr, readl(addr)); ++ (unsigned long)addr, dwc2_readl(addr)); + addr = hsotg->regs + HCINTMSK(i); + dev_dbg(hsotg->dev, "HCINTMSK @0x%08lX : 0x%08X\n", +- (unsigned long)addr, readl(addr)); ++ (unsigned long)addr, dwc2_readl(addr)); + addr = hsotg->regs + HCTSIZ(i); + dev_dbg(hsotg->dev, "HCTSIZ @0x%08lX : 0x%08X\n", +- (unsigned long)addr, readl(addr)); ++ (unsigned long)addr, dwc2_readl(addr)); + addr = hsotg->regs + HCDMA(i); + dev_dbg(hsotg->dev, "HCDMA @0x%08lX : 0x%08X\n", +- (unsigned long)addr, readl(addr)); ++ (unsigned long)addr, dwc2_readl(addr)); + if (hsotg->core_params->dma_desc_enable > 0) { + addr = hsotg->regs + HCDMAB(i); + dev_dbg(hsotg->dev, "HCDMAB @0x%08lX : 0x%08X\n", +- (unsigned long)addr, readl(addr)); ++ (unsigned long)addr, dwc2_readl(addr)); + } + } + #endif +@@ -1878,80 +1878,80 @@ void dwc2_dump_global_registers(struct d + dev_dbg(hsotg->dev, "Core Global Registers\n"); + addr = hsotg->regs + GOTGCTL; + dev_dbg(hsotg->dev, "GOTGCTL @0x%08lX : 0x%08X\n", +- (unsigned long)addr, readl(addr)); ++ (unsigned long)addr, dwc2_readl(addr)); + addr = hsotg->regs + GOTGINT; + dev_dbg(hsotg->dev, "GOTGINT @0x%08lX : 0x%08X\n", +- (unsigned long)addr, readl(addr)); ++ (unsigned long)addr, dwc2_readl(addr)); + addr = hsotg->regs + GAHBCFG; + dev_dbg(hsotg->dev, "GAHBCFG @0x%08lX : 0x%08X\n", +- (unsigned long)addr, readl(addr)); ++ (unsigned long)addr, dwc2_readl(addr)); + addr = hsotg->regs + GUSBCFG; + dev_dbg(hsotg->dev, "GUSBCFG @0x%08lX : 0x%08X\n", +- (unsigned long)addr, readl(addr)); ++ (unsigned long)addr, dwc2_readl(addr)); + addr = hsotg->regs + GRSTCTL; + dev_dbg(hsotg->dev, "GRSTCTL @0x%08lX : 0x%08X\n", +- (unsigned long)addr, readl(addr)); ++ (unsigned long)addr, dwc2_readl(addr)); + addr = hsotg->regs + GINTSTS; + dev_dbg(hsotg->dev, "GINTSTS @0x%08lX : 0x%08X\n", +- (unsigned long)addr, readl(addr)); ++ (unsigned long)addr, dwc2_readl(addr)); + addr = hsotg->regs + GINTMSK; + dev_dbg(hsotg->dev, "GINTMSK @0x%08lX : 0x%08X\n", +- (unsigned long)addr, readl(addr)); ++ (unsigned long)addr, dwc2_readl(addr)); + addr = hsotg->regs + GRXSTSR; + dev_dbg(hsotg->dev, "GRXSTSR @0x%08lX : 0x%08X\n", +- (unsigned long)addr, readl(addr)); ++ (unsigned long)addr, dwc2_readl(addr)); + addr = hsotg->regs + GRXFSIZ; + dev_dbg(hsotg->dev, "GRXFSIZ @0x%08lX : 0x%08X\n", +- (unsigned long)addr, readl(addr)); ++ (unsigned long)addr, dwc2_readl(addr)); + addr = hsotg->regs + GNPTXFSIZ; + dev_dbg(hsotg->dev, "GNPTXFSIZ @0x%08lX : 0x%08X\n", +- (unsigned long)addr, readl(addr)); ++ (unsigned long)addr, dwc2_readl(addr)); + addr = hsotg->regs + GNPTXSTS; + dev_dbg(hsotg->dev, "GNPTXSTS @0x%08lX : 0x%08X\n", +- (unsigned long)addr, readl(addr)); ++ (unsigned long)addr, dwc2_readl(addr)); + addr = hsotg->regs + GI2CCTL; + dev_dbg(hsotg->dev, "GI2CCTL @0x%08lX : 0x%08X\n", +- (unsigned long)addr, readl(addr)); ++ (unsigned long)addr, dwc2_readl(addr)); + addr = hsotg->regs + GPVNDCTL; + dev_dbg(hsotg->dev, "GPVNDCTL @0x%08lX : 0x%08X\n", +- (unsigned long)addr, readl(addr)); ++ (unsigned long)addr, dwc2_readl(addr)); + addr = hsotg->regs + GGPIO; + dev_dbg(hsotg->dev, "GGPIO @0x%08lX : 0x%08X\n", +- (unsigned long)addr, readl(addr)); ++ (unsigned long)addr, dwc2_readl(addr)); + addr = hsotg->regs + GUID; + dev_dbg(hsotg->dev, "GUID @0x%08lX : 0x%08X\n", +- (unsigned long)addr, readl(addr)); ++ (unsigned long)addr, dwc2_readl(addr)); + addr = hsotg->regs + GSNPSID; + dev_dbg(hsotg->dev, "GSNPSID @0x%08lX : 0x%08X\n", +- (unsigned long)addr, readl(addr)); ++ (unsigned long)addr, dwc2_readl(addr)); + addr = hsotg->regs + GHWCFG1; + dev_dbg(hsotg->dev, "GHWCFG1 @0x%08lX : 0x%08X\n", +- (unsigned long)addr, readl(addr)); ++ (unsigned long)addr, dwc2_readl(addr)); + addr = hsotg->regs + GHWCFG2; + dev_dbg(hsotg->dev, "GHWCFG2 @0x%08lX : 0x%08X\n", +- (unsigned long)addr, readl(addr)); ++ (unsigned long)addr, dwc2_readl(addr)); + addr = hsotg->regs + GHWCFG3; + dev_dbg(hsotg->dev, "GHWCFG3 @0x%08lX : 0x%08X\n", +- (unsigned long)addr, readl(addr)); ++ (unsigned long)addr, dwc2_readl(addr)); + addr = hsotg->regs + GHWCFG4; + dev_dbg(hsotg->dev, "GHWCFG4 @0x%08lX : 0x%08X\n", +- (unsigned long)addr, readl(addr)); ++ (unsigned long)addr, dwc2_readl(addr)); + addr = hsotg->regs + GLPMCFG; + dev_dbg(hsotg->dev, "GLPMCFG @0x%08lX : 0x%08X\n", +- (unsigned long)addr, readl(addr)); ++ (unsigned long)addr, dwc2_readl(addr)); + addr = hsotg->regs + GPWRDN; + dev_dbg(hsotg->dev, "GPWRDN @0x%08lX : 0x%08X\n", +- (unsigned long)addr, readl(addr)); ++ (unsigned long)addr, dwc2_readl(addr)); + addr = hsotg->regs + GDFIFOCFG; + dev_dbg(hsotg->dev, "GDFIFOCFG @0x%08lX : 0x%08X\n", +- (unsigned long)addr, readl(addr)); ++ (unsigned long)addr, dwc2_readl(addr)); + addr = hsotg->regs + HPTXFSIZ; + dev_dbg(hsotg->dev, "HPTXFSIZ @0x%08lX : 0x%08X\n", +- (unsigned long)addr, readl(addr)); ++ (unsigned long)addr, dwc2_readl(addr)); + + addr = hsotg->regs + PCGCTL; + dev_dbg(hsotg->dev, "PCGCTL @0x%08lX : 0x%08X\n", +- (unsigned long)addr, readl(addr)); ++ (unsigned long)addr, dwc2_readl(addr)); + #endif + } + +@@ -1970,15 +1970,15 @@ void dwc2_flush_tx_fifo(struct dwc2_hsot + + greset = GRSTCTL_TXFFLSH; + greset |= num << GRSTCTL_TXFNUM_SHIFT & GRSTCTL_TXFNUM_MASK; +- writel(greset, hsotg->regs + GRSTCTL); ++ dwc2_writel(greset, hsotg->regs + GRSTCTL); + + do { +- greset = readl(hsotg->regs + GRSTCTL); ++ greset = dwc2_readl(hsotg->regs + GRSTCTL); + if (++count > 10000) { + dev_warn(hsotg->dev, + "%s() HANG! GRSTCTL=%0x GNPTXSTS=0x%08x\n", + __func__, greset, +- readl(hsotg->regs + GNPTXSTS)); ++ dwc2_readl(hsotg->regs + GNPTXSTS)); + break; + } + udelay(1); +@@ -2001,10 +2001,10 @@ void dwc2_flush_rx_fifo(struct dwc2_hsot + dev_vdbg(hsotg->dev, "%s()\n", __func__); + + greset = GRSTCTL_RXFFLSH; +- writel(greset, hsotg->regs + GRSTCTL); ++ dwc2_writel(greset, hsotg->regs + GRSTCTL); + + do { +- greset = readl(hsotg->regs + GRSTCTL); ++ greset = dwc2_readl(hsotg->regs + GRSTCTL); + if (++count > 10000) { + dev_warn(hsotg->dev, "%s() HANG! GRSTCTL=%0x\n", + __func__, greset); +@@ -2666,7 +2666,7 @@ int dwc2_get_hwparams(struct dwc2_hsotg + * 0x45f42xxx or 0x45f43xxx, which corresponds to either "OT2" or "OT3", + * as in "OTG version 2.xx" or "OTG version 3.xx". + */ +- hw->snpsid = readl(hsotg->regs + GSNPSID); ++ hw->snpsid = dwc2_readl(hsotg->regs + GSNPSID); + if ((hw->snpsid & 0xfffff000) != 0x4f542000 && + (hw->snpsid & 0xfffff000) != 0x4f543000) { + dev_err(hsotg->dev, "Bad value for GSNPSID: 0x%08x\n", +@@ -2678,11 +2678,11 @@ int dwc2_get_hwparams(struct dwc2_hsotg + hw->snpsid >> 12 & 0xf, hw->snpsid >> 8 & 0xf, + hw->snpsid >> 4 & 0xf, hw->snpsid & 0xf, hw->snpsid); + +- hwcfg1 = readl(hsotg->regs + GHWCFG1); +- hwcfg2 = readl(hsotg->regs + GHWCFG2); +- hwcfg3 = readl(hsotg->regs + GHWCFG3); +- hwcfg4 = readl(hsotg->regs + GHWCFG4); +- grxfsiz = readl(hsotg->regs + GRXFSIZ); ++ hwcfg1 = dwc2_readl(hsotg->regs + GHWCFG1); ++ hwcfg2 = dwc2_readl(hsotg->regs + GHWCFG2); ++ hwcfg3 = dwc2_readl(hsotg->regs + GHWCFG3); ++ hwcfg4 = dwc2_readl(hsotg->regs + GHWCFG4); ++ grxfsiz = dwc2_readl(hsotg->regs + GRXFSIZ); + + dev_dbg(hsotg->dev, "hwcfg1=%08x\n", hwcfg1); + dev_dbg(hsotg->dev, "hwcfg2=%08x\n", hwcfg2); +@@ -2691,18 +2691,18 @@ int dwc2_get_hwparams(struct dwc2_hsotg + dev_dbg(hsotg->dev, "grxfsiz=%08x\n", grxfsiz); + + /* Force host mode to get HPTXFSIZ / GNPTXFSIZ exact power on value */ +- gusbcfg = readl(hsotg->regs + GUSBCFG); ++ gusbcfg = dwc2_readl(hsotg->regs + GUSBCFG); + gusbcfg |= GUSBCFG_FORCEHOSTMODE; +- writel(gusbcfg, hsotg->regs + GUSBCFG); ++ dwc2_writel(gusbcfg, hsotg->regs + GUSBCFG); + usleep_range(100000, 150000); + +- gnptxfsiz = readl(hsotg->regs + GNPTXFSIZ); +- hptxfsiz = readl(hsotg->regs + HPTXFSIZ); ++ gnptxfsiz = dwc2_readl(hsotg->regs + GNPTXFSIZ); ++ hptxfsiz = dwc2_readl(hsotg->regs + HPTXFSIZ); + dev_dbg(hsotg->dev, "gnptxfsiz=%08x\n", gnptxfsiz); + dev_dbg(hsotg->dev, "hptxfsiz=%08x\n", hptxfsiz); +- gusbcfg = readl(hsotg->regs + GUSBCFG); ++ gusbcfg = dwc2_readl(hsotg->regs + GUSBCFG); + gusbcfg &= ~GUSBCFG_FORCEHOSTMODE; +- writel(gusbcfg, hsotg->regs + GUSBCFG); ++ dwc2_writel(gusbcfg, hsotg->regs + GUSBCFG); + usleep_range(100000, 150000); + + /* hwcfg2 */ +@@ -2821,7 +2821,7 @@ u16 dwc2_get_otg_version(struct dwc2_hso + + bool dwc2_is_controller_alive(struct dwc2_hsotg *hsotg) + { +- if (readl(hsotg->regs + GSNPSID) == 0xffffffff) ++ if (dwc2_readl(hsotg->regs + GSNPSID) == 0xffffffff) + return false; + else + return true; +@@ -2835,10 +2835,10 @@ bool dwc2_is_controller_alive(struct dwc + */ + void dwc2_enable_global_interrupts(struct dwc2_hsotg *hsotg) + { +- u32 ahbcfg = readl(hsotg->regs + GAHBCFG); ++ u32 ahbcfg = dwc2_readl(hsotg->regs + GAHBCFG); + + ahbcfg |= GAHBCFG_GLBL_INTR_EN; +- writel(ahbcfg, hsotg->regs + GAHBCFG); ++ dwc2_writel(ahbcfg, hsotg->regs + GAHBCFG); + } + + /** +@@ -2849,10 +2849,10 @@ void dwc2_enable_global_interrupts(struc + */ + void dwc2_disable_global_interrupts(struct dwc2_hsotg *hsotg) + { +- u32 ahbcfg = readl(hsotg->regs + GAHBCFG); ++ u32 ahbcfg = dwc2_readl(hsotg->regs + GAHBCFG); + + ahbcfg &= ~GAHBCFG_GLBL_INTR_EN; +- writel(ahbcfg, hsotg->regs + GAHBCFG); ++ dwc2_writel(ahbcfg, hsotg->regs + GAHBCFG); + } + + MODULE_DESCRIPTION("DESIGNWARE HS OTG Core"); +--- a/drivers/usb/dwc2/core.h ++++ b/drivers/usb/dwc2/core.h +@@ -44,16 +44,28 @@ + #include + #include "hw.h" + +-#ifdef DWC2_LOG_WRITES +-static inline void do_write(u32 value, void *addr) ++static inline u32 dwc2_readl(const void __iomem *addr) + { +- writel(value, addr); +- pr_info("INFO:: wrote %08x to %p\n", value, addr); ++ u32 value = __raw_readl(addr); ++ ++ /* In order to preserve endianness __raw_* operation is used. Therefore ++ a barrier is needed to ensure IO access is not re-ordered across ++ reads or writes */ ++ mb(); ++ return value; + } + +-#undef writel +-#define writel(v, a) do_write(v, a) ++static inline void dwc2_writel(u32 value, void __iomem *addr) ++{ ++ __raw_writel(value, addr); ++ /* In order to preserve endianness __raw_* operation is used. Therefore ++ a barrier is needed to ensure IO access is not re-ordered across ++ reads or writes */ ++ mb(); ++#ifdef DWC2_LOG_WRITES ++ pr_info("INFO:: wrote %08x to %p\n", value, addr); + #endif ++} + + /* Maximum number of Endpoints/HostChannels */ + #define MAX_EPS_CHANNELS 16 +--- a/drivers/usb/dwc2/core_intr.c ++++ b/drivers/usb/dwc2/core_intr.c +@@ -80,15 +80,15 @@ static const char *dwc2_op_state_str(str + */ + static void dwc2_handle_usb_port_intr(struct dwc2_hsotg *hsotg) + { +- u32 hprt0 = readl(hsotg->regs + HPRT0); ++ u32 hprt0 = dwc2_readl(hsotg->regs + HPRT0); + + if (hprt0 & HPRT0_ENACHG) { + hprt0 &= ~HPRT0_ENA; +- writel(hprt0, hsotg->regs + HPRT0); ++ dwc2_writel(hprt0, hsotg->regs + HPRT0); + } + + /* Clear interrupt */ +- writel(GINTSTS_PRTINT, hsotg->regs + GINTSTS); ++ dwc2_writel(GINTSTS_PRTINT, hsotg->regs + GINTSTS); + } + + /** +@@ -102,7 +102,7 @@ static void dwc2_handle_mode_mismatch_in + dwc2_is_host_mode(hsotg) ? "Host" : "Device"); + + /* Clear interrupt */ +- writel(GINTSTS_MODEMIS, hsotg->regs + GINTSTS); ++ dwc2_writel(GINTSTS_MODEMIS, hsotg->regs + GINTSTS); + } + + /** +@@ -117,8 +117,8 @@ static void dwc2_handle_otg_intr(struct + u32 gotgctl; + u32 gintmsk; + +- gotgint = readl(hsotg->regs + GOTGINT); +- gotgctl = readl(hsotg->regs + GOTGCTL); ++ gotgint = dwc2_readl(hsotg->regs + GOTGINT); ++ gotgctl = dwc2_readl(hsotg->regs + GOTGCTL); + dev_dbg(hsotg->dev, "++OTG Interrupt gotgint=%0x [%s]\n", gotgint, + dwc2_op_state_str(hsotg)); + +@@ -126,7 +126,7 @@ static void dwc2_handle_otg_intr(struct + dev_dbg(hsotg->dev, + " ++OTG Interrupt: Session End Detected++ (%s)\n", + dwc2_op_state_str(hsotg)); +- gotgctl = readl(hsotg->regs + GOTGCTL); ++ gotgctl = dwc2_readl(hsotg->regs + GOTGCTL); + + if (dwc2_is_device_mode(hsotg)) + s3c_hsotg_disconnect(hsotg); +@@ -152,15 +152,15 @@ static void dwc2_handle_otg_intr(struct + hsotg->lx_state = DWC2_L0; + } + +- gotgctl = readl(hsotg->regs + GOTGCTL); ++ gotgctl = dwc2_readl(hsotg->regs + GOTGCTL); + gotgctl &= ~GOTGCTL_DEVHNPEN; +- writel(gotgctl, hsotg->regs + GOTGCTL); ++ dwc2_writel(gotgctl, hsotg->regs + GOTGCTL); + } + + if (gotgint & GOTGINT_SES_REQ_SUC_STS_CHNG) { + dev_dbg(hsotg->dev, + " ++OTG Interrupt: Session Request Success Status Change++\n"); +- gotgctl = readl(hsotg->regs + GOTGCTL); ++ gotgctl = dwc2_readl(hsotg->regs + GOTGCTL); + if (gotgctl & GOTGCTL_SESREQSCS) { + if (hsotg->core_params->phy_type == + DWC2_PHY_TYPE_PARAM_FS +@@ -168,9 +168,9 @@ static void dwc2_handle_otg_intr(struct + hsotg->srp_success = 1; + } else { + /* Clear Session Request */ +- gotgctl = readl(hsotg->regs + GOTGCTL); ++ gotgctl = dwc2_readl(hsotg->regs + GOTGCTL); + gotgctl &= ~GOTGCTL_SESREQ; +- writel(gotgctl, hsotg->regs + GOTGCTL); ++ dwc2_writel(gotgctl, hsotg->regs + GOTGCTL); + } + } + } +@@ -180,7 +180,7 @@ static void dwc2_handle_otg_intr(struct + * Print statements during the HNP interrupt handling + * can cause it to fail + */ +- gotgctl = readl(hsotg->regs + GOTGCTL); ++ gotgctl = dwc2_readl(hsotg->regs + GOTGCTL); + /* + * WA for 3.00a- HW is not setting cur_mode, even sometimes + * this does not help +@@ -200,9 +200,9 @@ static void dwc2_handle_otg_intr(struct + * interrupt does not get handled and Linux + * complains loudly. + */ +- gintmsk = readl(hsotg->regs + GINTMSK); ++ gintmsk = dwc2_readl(hsotg->regs + GINTMSK); + gintmsk &= ~GINTSTS_SOF; +- writel(gintmsk, hsotg->regs + GINTMSK); ++ dwc2_writel(gintmsk, hsotg->regs + GINTMSK); + + /* + * Call callback function with spin lock +@@ -216,9 +216,9 @@ static void dwc2_handle_otg_intr(struct + hsotg->op_state = OTG_STATE_B_HOST; + } + } else { +- gotgctl = readl(hsotg->regs + GOTGCTL); ++ gotgctl = dwc2_readl(hsotg->regs + GOTGCTL); + gotgctl &= ~(GOTGCTL_HNPREQ | GOTGCTL_DEVHNPEN); +- writel(gotgctl, hsotg->regs + GOTGCTL); ++ dwc2_writel(gotgctl, hsotg->regs + GOTGCTL); + dev_dbg(hsotg->dev, "HNP Failed\n"); + dev_err(hsotg->dev, + "Device Not Connected/Responding\n"); +@@ -244,9 +244,9 @@ static void dwc2_handle_otg_intr(struct + hsotg->op_state = OTG_STATE_A_PERIPHERAL; + } else { + /* Need to disable SOF interrupt immediately */ +- gintmsk = readl(hsotg->regs + GINTMSK); ++ gintmsk = dwc2_readl(hsotg->regs + GINTMSK); + gintmsk &= ~GINTSTS_SOF; +- writel(gintmsk, hsotg->regs + GINTMSK); ++ dwc2_writel(gintmsk, hsotg->regs + GINTMSK); + spin_unlock(&hsotg->lock); + dwc2_hcd_start(hsotg); + spin_lock(&hsotg->lock); +@@ -261,7 +261,7 @@ static void dwc2_handle_otg_intr(struct + dev_dbg(hsotg->dev, " ++OTG Interrupt: Debounce Done++\n"); + + /* Clear GOTGINT */ +- writel(gotgint, hsotg->regs + GOTGINT); ++ dwc2_writel(gotgint, hsotg->regs + GOTGINT); + } + + /** +@@ -276,11 +276,11 @@ static void dwc2_handle_otg_intr(struct + */ + static void dwc2_handle_conn_id_status_change_intr(struct dwc2_hsotg *hsotg) + { +- u32 gintmsk = readl(hsotg->regs + GINTMSK); ++ u32 gintmsk = dwc2_readl(hsotg->regs + GINTMSK); + + /* Need to disable SOF interrupt immediately */ + gintmsk &= ~GINTSTS_SOF; +- writel(gintmsk, hsotg->regs + GINTMSK); ++ dwc2_writel(gintmsk, hsotg->regs + GINTMSK); + + dev_dbg(hsotg->dev, " ++Connector ID Status Change Interrupt++ (%s)\n", + dwc2_is_host_mode(hsotg) ? "Host" : "Device"); +@@ -297,7 +297,7 @@ static void dwc2_handle_conn_id_status_c + } + + /* Clear interrupt */ +- writel(GINTSTS_CONIDSTSCHNG, hsotg->regs + GINTSTS); ++ dwc2_writel(GINTSTS_CONIDSTSCHNG, hsotg->regs + GINTSTS); + } + + /** +@@ -316,7 +316,7 @@ static void dwc2_handle_session_req_intr + dev_dbg(hsotg->dev, "++Session Request Interrupt++\n"); + + /* Clear interrupt */ +- writel(GINTSTS_SESSREQINT, hsotg->regs + GINTSTS); ++ dwc2_writel(GINTSTS_SESSREQINT, hsotg->regs + GINTSTS); + + /* + * Report disconnect if there is any previous session established +@@ -338,23 +338,23 @@ static void dwc2_handle_wakeup_detected_ + dev_dbg(hsotg->dev, "%s lxstate = %d\n", __func__, hsotg->lx_state); + + if (dwc2_is_device_mode(hsotg)) { +- dev_dbg(hsotg->dev, "DSTS=0x%0x\n", readl(hsotg->regs + DSTS)); ++ dev_dbg(hsotg->dev, "DSTS=0x%0x\n", dwc2_readl(hsotg->regs + DSTS)); + if (hsotg->lx_state == DWC2_L2) { +- u32 dctl = readl(hsotg->regs + DCTL); ++ u32 dctl = dwc2_readl(hsotg->regs + DCTL); + + /* Clear Remote Wakeup Signaling */ + dctl &= ~DCTL_RMTWKUPSIG; +- writel(dctl, hsotg->regs + DCTL); ++ dwc2_writel(dctl, hsotg->regs + DCTL); + } + /* Change to L0 state */ + hsotg->lx_state = DWC2_L0; + } else { + if (hsotg->lx_state != DWC2_L1) { +- u32 pcgcctl = readl(hsotg->regs + PCGCTL); ++ u32 pcgcctl = dwc2_readl(hsotg->regs + PCGCTL); + + /* Restart the Phy Clock */ + pcgcctl &= ~PCGCTL_STOPPCLK; +- writel(pcgcctl, hsotg->regs + PCGCTL); ++ dwc2_writel(pcgcctl, hsotg->regs + PCGCTL); + mod_timer(&hsotg->wkp_timer, + jiffies + msecs_to_jiffies(71)); + } else { +@@ -364,7 +364,7 @@ static void dwc2_handle_wakeup_detected_ + } + + /* Clear interrupt */ +- writel(GINTSTS_WKUPINT, hsotg->regs + GINTSTS); ++ dwc2_writel(GINTSTS_WKUPINT, hsotg->regs + GINTSTS); + } + + /* +@@ -383,7 +383,7 @@ static void dwc2_handle_disconnect_intr( + /* Change to L3 (OFF) state */ + hsotg->lx_state = DWC2_L3; + +- writel(GINTSTS_DISCONNINT, hsotg->regs + GINTSTS); ++ dwc2_writel(GINTSTS_DISCONNINT, hsotg->regs + GINTSTS); + } + + /* +@@ -405,7 +405,7 @@ static void dwc2_handle_usb_suspend_intr + * Check the Device status register to determine if the Suspend + * state is active + */ +- dsts = readl(hsotg->regs + DSTS); ++ dsts = dwc2_readl(hsotg->regs + DSTS); + dev_dbg(hsotg->dev, "DSTS=0x%0x\n", dsts); + dev_dbg(hsotg->dev, + "DSTS.Suspend Status=%d HWCFG4.Power Optimize=%d\n", +@@ -427,7 +427,7 @@ static void dwc2_handle_usb_suspend_intr + hsotg->lx_state = DWC2_L2; + + /* Clear interrupt */ +- writel(GINTSTS_USBSUSP, hsotg->regs + GINTSTS); ++ dwc2_writel(GINTSTS_USBSUSP, hsotg->regs + GINTSTS); + } + + #define GINTMSK_COMMON (GINTSTS_WKUPINT | GINTSTS_SESSREQINT | \ +@@ -445,9 +445,9 @@ static u32 dwc2_read_common_intr(struct + u32 gahbcfg; + u32 gintmsk_common = GINTMSK_COMMON; + +- gintsts = readl(hsotg->regs + GINTSTS); +- gintmsk = readl(hsotg->regs + GINTMSK); +- gahbcfg = readl(hsotg->regs + GAHBCFG); ++ gintsts = dwc2_readl(hsotg->regs + GINTSTS); ++ gintmsk = dwc2_readl(hsotg->regs + GINTMSK); ++ gahbcfg = dwc2_readl(hsotg->regs + GAHBCFG); + + /* If any common interrupts set */ + if (gintsts & gintmsk_common) +--- a/drivers/usb/dwc2/gadget.c ++++ b/drivers/usb/dwc2/gadget.c +@@ -58,12 +58,12 @@ static inline struct dwc2_hsotg *to_hsot + + static inline void __orr32(void __iomem *ptr, u32 val) + { +- writel(readl(ptr) | val, ptr); ++ dwc2_writel(dwc2_readl(ptr) | val, ptr); + } + + static inline void __bic32(void __iomem *ptr, u32 val) + { +- writel(readl(ptr) & ~val, ptr); ++ dwc2_writel(dwc2_readl(ptr) & ~val, ptr); + } + + static inline struct s3c_hsotg_ep *index_to_ep(struct dwc2_hsotg *hsotg, +@@ -109,14 +109,14 @@ static inline bool using_dma(struct dwc2 + */ + static void s3c_hsotg_en_gsint(struct dwc2_hsotg *hsotg, u32 ints) + { +- u32 gsintmsk = readl(hsotg->regs + GINTMSK); ++ u32 gsintmsk = dwc2_readl(hsotg->regs + GINTMSK); + u32 new_gsintmsk; + + new_gsintmsk = gsintmsk | ints; + + if (new_gsintmsk != gsintmsk) { + dev_dbg(hsotg->dev, "gsintmsk now 0x%08x\n", new_gsintmsk); +- writel(new_gsintmsk, hsotg->regs + GINTMSK); ++ dwc2_writel(new_gsintmsk, hsotg->regs + GINTMSK); + } + } + +@@ -127,13 +127,13 @@ static void s3c_hsotg_en_gsint(struct dw + */ + static void s3c_hsotg_disable_gsint(struct dwc2_hsotg *hsotg, u32 ints) + { +- u32 gsintmsk = readl(hsotg->regs + GINTMSK); ++ u32 gsintmsk = dwc2_readl(hsotg->regs + GINTMSK); + u32 new_gsintmsk; + + new_gsintmsk = gsintmsk & ~ints; + + if (new_gsintmsk != gsintmsk) +- writel(new_gsintmsk, hsotg->regs + GINTMSK); ++ dwc2_writel(new_gsintmsk, hsotg->regs + GINTMSK); + } + + /** +@@ -158,12 +158,12 @@ static void s3c_hsotg_ctrl_epint(struct + bit <<= 16; + + local_irq_save(flags); +- daint = readl(hsotg->regs + DAINTMSK); ++ daint = dwc2_readl(hsotg->regs + DAINTMSK); + if (en) + daint |= bit; + else + daint &= ~bit; +- writel(daint, hsotg->regs + DAINTMSK); ++ dwc2_writel(daint, hsotg->regs + DAINTMSK); + local_irq_restore(flags); + } + +@@ -183,8 +183,8 @@ static void s3c_hsotg_init_fifo(struct d + hsotg->fifo_map = 0; + + /* set RX/NPTX FIFO sizes */ +- writel(hsotg->g_rx_fifo_sz, hsotg->regs + GRXFSIZ); +- writel((hsotg->g_rx_fifo_sz << FIFOSIZE_STARTADDR_SHIFT) | ++ dwc2_writel(hsotg->g_rx_fifo_sz, hsotg->regs + GRXFSIZ); ++ dwc2_writel((hsotg->g_rx_fifo_sz << FIFOSIZE_STARTADDR_SHIFT) | + (hsotg->g_np_g_tx_fifo_sz << FIFOSIZE_DEPTH_SHIFT), + hsotg->regs + GNPTXFSIZ); + +@@ -212,7 +212,7 @@ static void s3c_hsotg_init_fifo(struct d + "insufficient fifo memory"); + addr += hsotg->g_tx_fifo_sz[ep]; + +- writel(val, hsotg->regs + DPTXFSIZN(ep)); ++ dwc2_writel(val, hsotg->regs + DPTXFSIZN(ep)); + } + + /* +@@ -220,13 +220,13 @@ static void s3c_hsotg_init_fifo(struct d + * all fifos are flushed before continuing + */ + +- writel(GRSTCTL_TXFNUM(0x10) | GRSTCTL_TXFFLSH | ++ dwc2_writel(GRSTCTL_TXFNUM(0x10) | GRSTCTL_TXFFLSH | + GRSTCTL_RXFFLSH, hsotg->regs + GRSTCTL); + + /* wait until the fifos are both flushed */ + timeout = 100; + while (1) { +- val = readl(hsotg->regs + GRSTCTL); ++ val = dwc2_readl(hsotg->regs + GRSTCTL); + + if ((val & (GRSTCTL_TXFFLSH | GRSTCTL_RXFFLSH)) == 0) + break; +@@ -319,7 +319,7 @@ static int s3c_hsotg_write_fifo(struct d + struct s3c_hsotg_req *hs_req) + { + bool periodic = is_ep_periodic(hs_ep); +- u32 gnptxsts = readl(hsotg->regs + GNPTXSTS); ++ u32 gnptxsts = dwc2_readl(hsotg->regs + GNPTXSTS); + int buf_pos = hs_req->req.actual; + int to_write = hs_ep->size_loaded; + void *data; +@@ -334,7 +334,7 @@ static int s3c_hsotg_write_fifo(struct d + return 0; + + if (periodic && !hsotg->dedicated_fifos) { +- u32 epsize = readl(hsotg->regs + DIEPTSIZ(hs_ep->index)); ++ u32 epsize = dwc2_readl(hsotg->regs + DIEPTSIZ(hs_ep->index)); + int size_left; + int size_done; + +@@ -375,7 +375,7 @@ static int s3c_hsotg_write_fifo(struct d + return -ENOSPC; + } + } else if (hsotg->dedicated_fifos && hs_ep->index != 0) { +- can_write = readl(hsotg->regs + DTXFSTS(hs_ep->index)); ++ can_write = dwc2_readl(hsotg->regs + DTXFSTS(hs_ep->index)); + + can_write &= 0xffff; + can_write *= 4; +@@ -552,11 +552,11 @@ static void s3c_hsotg_start_req(struct d + epsize_reg = dir_in ? DIEPTSIZ(index) : DOEPTSIZ(index); + + dev_dbg(hsotg->dev, "%s: DxEPCTL=0x%08x, ep %d, dir %s\n", +- __func__, readl(hsotg->regs + epctrl_reg), index, ++ __func__, dwc2_readl(hsotg->regs + epctrl_reg), index, + hs_ep->dir_in ? "in" : "out"); + + /* If endpoint is stalled, we will restart request later */ +- ctrl = readl(hsotg->regs + epctrl_reg); ++ ctrl = dwc2_readl(hsotg->regs + epctrl_reg); + + if (ctrl & DXEPCTL_STALL) { + dev_warn(hsotg->dev, "%s: ep%d is stalled\n", __func__, index); +@@ -620,7 +620,7 @@ static void s3c_hsotg_start_req(struct d + hs_ep->req = hs_req; + + /* write size / packets */ +- writel(epsize, hsotg->regs + epsize_reg); ++ dwc2_writel(epsize, hsotg->regs + epsize_reg); + + if (using_dma(hsotg) && !continuing) { + unsigned int dma_reg; +@@ -631,7 +631,7 @@ static void s3c_hsotg_start_req(struct d + */ + + dma_reg = dir_in ? DIEPDMA(index) : DOEPDMA(index); +- writel(ureq->dma, hsotg->regs + dma_reg); ++ dwc2_writel(ureq->dma, hsotg->regs + dma_reg); + + dev_dbg(hsotg->dev, "%s: %pad => 0x%08x\n", + __func__, &ureq->dma, dma_reg); +@@ -647,7 +647,7 @@ static void s3c_hsotg_start_req(struct d + ctrl |= DXEPCTL_CNAK; /* clear NAK set by core */ + + dev_dbg(hsotg->dev, "%s: DxEPCTL=0x%08x\n", __func__, ctrl); +- writel(ctrl, hsotg->regs + epctrl_reg); ++ dwc2_writel(ctrl, hsotg->regs + epctrl_reg); + + /* + * set these, it seems that DMA support increments past the end +@@ -669,7 +669,7 @@ static void s3c_hsotg_start_req(struct d + * to debugging to see what is going on. + */ + if (dir_in) +- writel(DIEPMSK_INTKNTXFEMPMSK, ++ dwc2_writel(DIEPMSK_INTKNTXFEMPMSK, + hsotg->regs + DIEPINT(index)); + + /* +@@ -678,13 +678,13 @@ static void s3c_hsotg_start_req(struct d + */ + + /* check ep is enabled */ +- if (!(readl(hsotg->regs + epctrl_reg) & DXEPCTL_EPENA)) ++ if (!(dwc2_readl(hsotg->regs + epctrl_reg) & DXEPCTL_EPENA)) + dev_dbg(hsotg->dev, + "ep%d: failed to become enabled (DXEPCTL=0x%08x)?\n", +- index, readl(hsotg->regs + epctrl_reg)); ++ index, dwc2_readl(hsotg->regs + epctrl_reg)); + + dev_dbg(hsotg->dev, "%s: DXEPCTL=0x%08x\n", +- __func__, readl(hsotg->regs + epctrl_reg)); ++ __func__, dwc2_readl(hsotg->regs + epctrl_reg)); + + /* enable ep interrupts */ + s3c_hsotg_ctrl_epint(hsotg, hs_ep->index, hs_ep->dir_in, 1); +@@ -896,7 +896,7 @@ static struct s3c_hsotg_ep *ep_from_wind + */ + static int s3c_hsotg_set_test_mode(struct dwc2_hsotg *hsotg, int testmode) + { +- int dctl = readl(hsotg->regs + DCTL); ++ int dctl = dwc2_readl(hsotg->regs + DCTL); + + dctl &= ~DCTL_TSTCTL_MASK; + switch (testmode) { +@@ -910,7 +910,7 @@ static int s3c_hsotg_set_test_mode(struc + default: + return -EINVAL; + } +- writel(dctl, hsotg->regs + DCTL); ++ dwc2_writel(dctl, hsotg->regs + DCTL); + return 0; + } + +@@ -1169,14 +1169,14 @@ static void s3c_hsotg_stall_ep0(struct d + * taken effect, so no need to clear later. + */ + +- ctrl = readl(hsotg->regs + reg); ++ ctrl = dwc2_readl(hsotg->regs + reg); + ctrl |= DXEPCTL_STALL; + ctrl |= DXEPCTL_CNAK; +- writel(ctrl, hsotg->regs + reg); ++ dwc2_writel(ctrl, hsotg->regs + reg); + + dev_dbg(hsotg->dev, + "written DXEPCTL=0x%08x to %08x (DXEPCTL=0x%08x)\n", +- ctrl, reg, readl(hsotg->regs + reg)); ++ ctrl, reg, dwc2_readl(hsotg->regs + reg)); + + /* + * complete won't be called, so we enqueue +@@ -1220,11 +1220,11 @@ static void s3c_hsotg_process_control(st + switch (ctrl->bRequest) { + case USB_REQ_SET_ADDRESS: + hsotg->connected = 1; +- dcfg = readl(hsotg->regs + DCFG); ++ dcfg = dwc2_readl(hsotg->regs + DCFG); + dcfg &= ~DCFG_DEVADDR_MASK; + dcfg |= (le16_to_cpu(ctrl->wValue) << + DCFG_DEVADDR_SHIFT) & DCFG_DEVADDR_MASK; +- writel(dcfg, hsotg->regs + DCFG); ++ dwc2_writel(dcfg, hsotg->regs + DCFG); + + dev_info(hsotg->dev, "new address %d\n", ctrl->wValue); + +@@ -1342,15 +1342,15 @@ static void s3c_hsotg_program_zlp(struct + dev_dbg(hsotg->dev, "Receiving zero-length packet on ep%d\n", + index); + +- writel(DXEPTSIZ_MC(1) | DXEPTSIZ_PKTCNT(1) | ++ dwc2_writel(DXEPTSIZ_MC(1) | DXEPTSIZ_PKTCNT(1) | + DXEPTSIZ_XFERSIZE(0), hsotg->regs + + epsiz_reg); + +- ctrl = readl(hsotg->regs + epctl_reg); ++ ctrl = dwc2_readl(hsotg->regs + epctl_reg); + ctrl |= DXEPCTL_CNAK; /* clear NAK set by core */ + ctrl |= DXEPCTL_EPENA; /* ensure ep enabled */ + ctrl |= DXEPCTL_USBACTEP; +- writel(ctrl, hsotg->regs + epctl_reg); ++ dwc2_writel(ctrl, hsotg->regs + epctl_reg); + } + + /** +@@ -1444,7 +1444,7 @@ static void s3c_hsotg_rx_data(struct dwc + + + if (!hs_req) { +- u32 epctl = readl(hsotg->regs + DOEPCTL(ep_idx)); ++ u32 epctl = dwc2_readl(hsotg->regs + DOEPCTL(ep_idx)); + int ptr; + + dev_dbg(hsotg->dev, +@@ -1453,7 +1453,7 @@ static void s3c_hsotg_rx_data(struct dwc + + /* dump the data from the FIFO, we've nothing we can do */ + for (ptr = 0; ptr < size; ptr += 4) +- (void)readl(fifo); ++ (void)dwc2_readl(fifo); + + return; + } +@@ -1518,7 +1518,7 @@ static void s3c_hsotg_ep0_zlp(struct dwc + */ + static void s3c_hsotg_handle_outdone(struct dwc2_hsotg *hsotg, int epnum) + { +- u32 epsize = readl(hsotg->regs + DOEPTSIZ(epnum)); ++ u32 epsize = dwc2_readl(hsotg->regs + DOEPTSIZ(epnum)); + struct s3c_hsotg_ep *hs_ep = hsotg->eps_out[epnum]; + struct s3c_hsotg_req *hs_req = hs_ep->req; + struct usb_request *req = &hs_req->req; +@@ -1590,7 +1590,7 @@ static u32 s3c_hsotg_read_frameno(struct + { + u32 dsts; + +- dsts = readl(hsotg->regs + DSTS); ++ dsts = dwc2_readl(hsotg->regs + DSTS); + dsts &= DSTS_SOFFN_MASK; + dsts >>= DSTS_SOFFN_SHIFT; + +@@ -1615,7 +1615,7 @@ static u32 s3c_hsotg_read_frameno(struct + */ + static void s3c_hsotg_handle_rx(struct dwc2_hsotg *hsotg) + { +- u32 grxstsr = readl(hsotg->regs + GRXSTSP); ++ u32 grxstsr = dwc2_readl(hsotg->regs + GRXSTSP); + u32 epnum, status, size; + + WARN_ON(using_dma(hsotg)); +@@ -1646,7 +1646,7 @@ static void s3c_hsotg_handle_rx(struct d + dev_dbg(hsotg->dev, + "SetupDone (Frame=0x%08x, DOPEPCTL=0x%08x)\n", + s3c_hsotg_read_frameno(hsotg), +- readl(hsotg->regs + DOEPCTL(0))); ++ dwc2_readl(hsotg->regs + DOEPCTL(0))); + /* + * Call s3c_hsotg_handle_outdone here if it was not called from + * GRXSTS_PKTSTS_OUTDONE. That is, if the core didn't +@@ -1664,7 +1664,7 @@ static void s3c_hsotg_handle_rx(struct d + dev_dbg(hsotg->dev, + "SetupRX (Frame=0x%08x, DOPEPCTL=0x%08x)\n", + s3c_hsotg_read_frameno(hsotg), +- readl(hsotg->regs + DOEPCTL(0))); ++ dwc2_readl(hsotg->regs + DOEPCTL(0))); + + WARN_ON(hsotg->ep0_state != DWC2_EP0_SETUP); + +@@ -1743,15 +1743,15 @@ static void s3c_hsotg_set_ep_maxpacket(s + } + + if (dir_in) { +- reg = readl(regs + DIEPCTL(ep)); ++ reg = dwc2_readl(regs + DIEPCTL(ep)); + reg &= ~DXEPCTL_MPS_MASK; + reg |= mpsval; +- writel(reg, regs + DIEPCTL(ep)); ++ dwc2_writel(reg, regs + DIEPCTL(ep)); + } else { +- reg = readl(regs + DOEPCTL(ep)); ++ reg = dwc2_readl(regs + DOEPCTL(ep)); + reg &= ~DXEPCTL_MPS_MASK; + reg |= mpsval; +- writel(reg, regs + DOEPCTL(ep)); ++ dwc2_writel(reg, regs + DOEPCTL(ep)); + } + + return; +@@ -1770,14 +1770,14 @@ static void s3c_hsotg_txfifo_flush(struc + int timeout; + int val; + +- writel(GRSTCTL_TXFNUM(idx) | GRSTCTL_TXFFLSH, ++ dwc2_writel(GRSTCTL_TXFNUM(idx) | GRSTCTL_TXFFLSH, + hsotg->regs + GRSTCTL); + + /* wait until the fifo is flushed */ + timeout = 100; + + while (1) { +- val = readl(hsotg->regs + GRSTCTL); ++ val = dwc2_readl(hsotg->regs + GRSTCTL); + + if ((val & (GRSTCTL_TXFFLSH)) == 0) + break; +@@ -1838,7 +1838,7 @@ static void s3c_hsotg_complete_in(struct + struct s3c_hsotg_ep *hs_ep) + { + struct s3c_hsotg_req *hs_req = hs_ep->req; +- u32 epsize = readl(hsotg->regs + DIEPTSIZ(hs_ep->index)); ++ u32 epsize = dwc2_readl(hsotg->regs + DIEPTSIZ(hs_ep->index)); + int size_left, size_done; + + if (!hs_req) { +@@ -1929,11 +1929,11 @@ static void s3c_hsotg_epint(struct dwc2_ + u32 ints; + u32 ctrl; + +- ints = readl(hsotg->regs + epint_reg); +- ctrl = readl(hsotg->regs + epctl_reg); ++ ints = dwc2_readl(hsotg->regs + epint_reg); ++ ctrl = dwc2_readl(hsotg->regs + epctl_reg); + + /* Clear endpoint interrupts */ +- writel(ints, hsotg->regs + epint_reg); ++ dwc2_writel(ints, hsotg->regs + epint_reg); + + if (!hs_ep) { + dev_err(hsotg->dev, "%s:Interrupt for unconfigured ep%d(%s)\n", +@@ -1954,13 +1954,13 @@ static void s3c_hsotg_epint(struct dwc2_ + ctrl |= DXEPCTL_SETEVENFR; + else + ctrl |= DXEPCTL_SETODDFR; +- writel(ctrl, hsotg->regs + epctl_reg); ++ dwc2_writel(ctrl, hsotg->regs + epctl_reg); + } + + dev_dbg(hsotg->dev, + "%s: XferCompl: DxEPCTL=0x%08x, DXEPTSIZ=%08x\n", +- __func__, readl(hsotg->regs + epctl_reg), +- readl(hsotg->regs + epsiz_reg)); ++ __func__, dwc2_readl(hsotg->regs + epctl_reg), ++ dwc2_readl(hsotg->regs + epsiz_reg)); + + /* + * we get OutDone from the FIFO, so we only need to look +@@ -1985,16 +1985,16 @@ static void s3c_hsotg_epint(struct dwc2_ + dev_dbg(hsotg->dev, "%s: EPDisbld\n", __func__); + + if (dir_in) { +- int epctl = readl(hsotg->regs + epctl_reg); ++ int epctl = dwc2_readl(hsotg->regs + epctl_reg); + + s3c_hsotg_txfifo_flush(hsotg, hs_ep->fifo_index); + + if ((epctl & DXEPCTL_STALL) && + (epctl & DXEPCTL_EPTYPE_BULK)) { +- int dctl = readl(hsotg->regs + DCTL); ++ int dctl = dwc2_readl(hsotg->regs + DCTL); + + dctl |= DCTL_CGNPINNAK; +- writel(dctl, hsotg->regs + DCTL); ++ dwc2_writel(dctl, hsotg->regs + DCTL); + } + } + } +@@ -2056,7 +2056,7 @@ static void s3c_hsotg_epint(struct dwc2_ + */ + static void s3c_hsotg_irq_enumdone(struct dwc2_hsotg *hsotg) + { +- u32 dsts = readl(hsotg->regs + DSTS); ++ u32 dsts = dwc2_readl(hsotg->regs + DSTS); + int ep0_mps = 0, ep_mps = 8; + + /* +@@ -2123,8 +2123,8 @@ static void s3c_hsotg_irq_enumdone(struc + s3c_hsotg_enqueue_setup(hsotg); + + dev_dbg(hsotg->dev, "EP0: DIEPCTL0=0x%08x, DOEPCTL0=0x%08x\n", +- readl(hsotg->regs + DIEPCTL0), +- readl(hsotg->regs + DOEPCTL0)); ++ dwc2_readl(hsotg->regs + DIEPCTL0), ++ dwc2_readl(hsotg->regs + DOEPCTL0)); + } + + /** +@@ -2151,7 +2151,7 @@ static void kill_all_requests(struct dwc + + if (!hsotg->dedicated_fifos) + return; +- size = (readl(hsotg->regs + DTXFSTS(ep->index)) & 0xffff) * 4; ++ size = (dwc2_readl(hsotg->regs + DTXFSTS(ep->index)) & 0xffff) * 4; + if (size < ep->fifo_size) + s3c_hsotg_txfifo_flush(hsotg, ep->fifo_index); + } +@@ -2236,11 +2236,11 @@ static int s3c_hsotg_corereset(struct dw + dev_dbg(hsotg->dev, "resetting core\n"); + + /* issue soft reset */ +- writel(GRSTCTL_CSFTRST, hsotg->regs + GRSTCTL); ++ dwc2_writel(GRSTCTL_CSFTRST, hsotg->regs + GRSTCTL); + + timeout = 10000; + do { +- grstctl = readl(hsotg->regs + GRSTCTL); ++ grstctl = dwc2_readl(hsotg->regs + GRSTCTL); + } while ((grstctl & GRSTCTL_CSFTRST) && timeout-- > 0); + + if (grstctl & GRSTCTL_CSFTRST) { +@@ -2251,7 +2251,7 @@ static int s3c_hsotg_corereset(struct dw + timeout = 10000; + + while (1) { +- u32 grstctl = readl(hsotg->regs + GRSTCTL); ++ u32 grstctl = dwc2_readl(hsotg->regs + GRSTCTL); + + if (timeout-- < 0) { + dev_info(hsotg->dev, +@@ -2291,7 +2291,7 @@ void s3c_hsotg_core_init_disconnected(st + + /* set the PLL on, remove the HNP/SRP and set the PHY */ + val = (hsotg->phyif == GUSBCFG_PHYIF8) ? 9 : 5; +- writel(hsotg->phyif | GUSBCFG_TOUTCAL(7) | ++ dwc2_writel(hsotg->phyif | GUSBCFG_TOUTCAL(7) | + (val << GUSBCFG_USBTRDTIM_SHIFT), hsotg->regs + GUSBCFG); + + s3c_hsotg_init_fifo(hsotg); +@@ -2299,15 +2299,15 @@ void s3c_hsotg_core_init_disconnected(st + if (!is_usb_reset) + __orr32(hsotg->regs + DCTL, DCTL_SFTDISCON); + +- writel(DCFG_EPMISCNT(1) | DCFG_DEVSPD_HS, hsotg->regs + DCFG); ++ dwc2_writel(DCFG_EPMISCNT(1) | DCFG_DEVSPD_HS, hsotg->regs + DCFG); + + /* Clear any pending OTG interrupts */ +- writel(0xffffffff, hsotg->regs + GOTGINT); ++ dwc2_writel(0xffffffff, hsotg->regs + GOTGINT); + + /* Clear any pending interrupts */ +- writel(0xffffffff, hsotg->regs + GINTSTS); ++ dwc2_writel(0xffffffff, hsotg->regs + GINTSTS); + +- writel(GINTSTS_ERLYSUSP | GINTSTS_SESSREQINT | ++ dwc2_writel(GINTSTS_ERLYSUSP | GINTSTS_SESSREQINT | + GINTSTS_GOUTNAKEFF | GINTSTS_GINNAKEFF | + GINTSTS_CONIDSTSCHNG | GINTSTS_USBRST | + GINTSTS_ENUMDONE | GINTSTS_OTGINT | +@@ -2315,11 +2315,11 @@ void s3c_hsotg_core_init_disconnected(st + hsotg->regs + GINTMSK); + + if (using_dma(hsotg)) +- writel(GAHBCFG_GLBL_INTR_EN | GAHBCFG_DMA_EN | ++ dwc2_writel(GAHBCFG_GLBL_INTR_EN | GAHBCFG_DMA_EN | + (GAHBCFG_HBSTLEN_INCR4 << GAHBCFG_HBSTLEN_SHIFT), + hsotg->regs + GAHBCFG); + else +- writel(((hsotg->dedicated_fifos) ? (GAHBCFG_NP_TXF_EMP_LVL | ++ dwc2_writel(((hsotg->dedicated_fifos) ? (GAHBCFG_NP_TXF_EMP_LVL | + GAHBCFG_P_TXF_EMP_LVL) : 0) | + GAHBCFG_GLBL_INTR_EN, + hsotg->regs + GAHBCFG); +@@ -2330,7 +2330,7 @@ void s3c_hsotg_core_init_disconnected(st + * interrupts. + */ + +- writel(((hsotg->dedicated_fifos && !using_dma(hsotg)) ? ++ dwc2_writel(((hsotg->dedicated_fifos && !using_dma(hsotg)) ? + DIEPMSK_TXFIFOEMPTY | DIEPMSK_INTKNTXFEMPMSK : 0) | + DIEPMSK_EPDISBLDMSK | DIEPMSK_XFERCOMPLMSK | + DIEPMSK_TIMEOUTMSK | DIEPMSK_AHBERRMSK | +@@ -2341,17 +2341,17 @@ void s3c_hsotg_core_init_disconnected(st + * don't need XferCompl, we get that from RXFIFO in slave mode. In + * DMA mode we may need this. + */ +- writel((using_dma(hsotg) ? (DIEPMSK_XFERCOMPLMSK | ++ dwc2_writel((using_dma(hsotg) ? (DIEPMSK_XFERCOMPLMSK | + DIEPMSK_TIMEOUTMSK) : 0) | + DOEPMSK_EPDISBLDMSK | DOEPMSK_AHBERRMSK | + DOEPMSK_SETUPMSK, + hsotg->regs + DOEPMSK); + +- writel(0, hsotg->regs + DAINTMSK); ++ dwc2_writel(0, hsotg->regs + DAINTMSK); + + dev_dbg(hsotg->dev, "EP0: DIEPCTL0=0x%08x, DOEPCTL0=0x%08x\n", +- readl(hsotg->regs + DIEPCTL0), +- readl(hsotg->regs + DOEPCTL0)); ++ dwc2_readl(hsotg->regs + DIEPCTL0), ++ dwc2_readl(hsotg->regs + DOEPCTL0)); + + /* enable in and out endpoint interrupts */ + s3c_hsotg_en_gsint(hsotg, GINTSTS_OEPINT | GINTSTS_IEPINT); +@@ -2374,7 +2374,7 @@ void s3c_hsotg_core_init_disconnected(st + __bic32(hsotg->regs + DCTL, DCTL_PWRONPRGDONE); + } + +- dev_dbg(hsotg->dev, "DCTL=0x%08x\n", readl(hsotg->regs + DCTL)); ++ dev_dbg(hsotg->dev, "DCTL=0x%08x\n", dwc2_readl(hsotg->regs + DCTL)); + + /* + * DxEPCTL_USBActEp says RO in manual, but seems to be set by +@@ -2382,23 +2382,23 @@ void s3c_hsotg_core_init_disconnected(st + */ + + /* set to read 1 8byte packet */ +- writel(DXEPTSIZ_MC(1) | DXEPTSIZ_PKTCNT(1) | ++ dwc2_writel(DXEPTSIZ_MC(1) | DXEPTSIZ_PKTCNT(1) | + DXEPTSIZ_XFERSIZE(8), hsotg->regs + DOEPTSIZ0); + +- writel(s3c_hsotg_ep0_mps(hsotg->eps_out[0]->ep.maxpacket) | ++ dwc2_writel(s3c_hsotg_ep0_mps(hsotg->eps_out[0]->ep.maxpacket) | + DXEPCTL_CNAK | DXEPCTL_EPENA | + DXEPCTL_USBACTEP, + hsotg->regs + DOEPCTL0); + + /* enable, but don't activate EP0in */ +- writel(s3c_hsotg_ep0_mps(hsotg->eps_out[0]->ep.maxpacket) | ++ dwc2_writel(s3c_hsotg_ep0_mps(hsotg->eps_out[0]->ep.maxpacket) | + DXEPCTL_USBACTEP, hsotg->regs + DIEPCTL0); + + s3c_hsotg_enqueue_setup(hsotg); + + dev_dbg(hsotg->dev, "EP0: DIEPCTL0=0x%08x, DOEPCTL0=0x%08x\n", +- readl(hsotg->regs + DIEPCTL0), +- readl(hsotg->regs + DOEPCTL0)); ++ dwc2_readl(hsotg->regs + DIEPCTL0), ++ dwc2_readl(hsotg->regs + DOEPCTL0)); + + /* clear global NAKs */ + val = DCTL_CGOUTNAK | DCTL_CGNPINNAK; +@@ -2438,8 +2438,8 @@ static irqreturn_t s3c_hsotg_irq(int irq + + spin_lock(&hsotg->lock); + irq_retry: +- gintsts = readl(hsotg->regs + GINTSTS); +- gintmsk = readl(hsotg->regs + GINTMSK); ++ gintsts = dwc2_readl(hsotg->regs + GINTSTS); ++ gintmsk = dwc2_readl(hsotg->regs + GINTMSK); + + dev_dbg(hsotg->dev, "%s: %08x %08x (%08x) retry %d\n", + __func__, gintsts, gintsts & gintmsk, gintmsk, retry_count); +@@ -2447,14 +2447,14 @@ irq_retry: + gintsts &= gintmsk; + + if (gintsts & GINTSTS_ENUMDONE) { +- writel(GINTSTS_ENUMDONE, hsotg->regs + GINTSTS); ++ dwc2_writel(GINTSTS_ENUMDONE, hsotg->regs + GINTSTS); + + s3c_hsotg_irq_enumdone(hsotg); + } + + if (gintsts & (GINTSTS_OEPINT | GINTSTS_IEPINT)) { +- u32 daint = readl(hsotg->regs + DAINT); +- u32 daintmsk = readl(hsotg->regs + DAINTMSK); ++ u32 daint = dwc2_readl(hsotg->regs + DAINT); ++ u32 daintmsk = dwc2_readl(hsotg->regs + DAINTMSK); + u32 daint_out, daint_in; + int ep; + +@@ -2479,13 +2479,13 @@ irq_retry: + + if (gintsts & GINTSTS_USBRST) { + +- u32 usb_status = readl(hsotg->regs + GOTGCTL); ++ u32 usb_status = dwc2_readl(hsotg->regs + GOTGCTL); + + dev_dbg(hsotg->dev, "%s: USBRst\n", __func__); + dev_dbg(hsotg->dev, "GNPTXSTS=%08x\n", +- readl(hsotg->regs + GNPTXSTS)); ++ dwc2_readl(hsotg->regs + GNPTXSTS)); + +- writel(GINTSTS_USBRST, hsotg->regs + GINTSTS); ++ dwc2_writel(GINTSTS_USBRST, hsotg->regs + GINTSTS); + + /* Report disconnection if it is not already done. */ + s3c_hsotg_disconnect(hsotg); +@@ -2538,7 +2538,7 @@ irq_retry: + + if (gintsts & GINTSTS_ERLYSUSP) { + dev_dbg(hsotg->dev, "GINTSTS_ErlySusp\n"); +- writel(GINTSTS_ERLYSUSP, hsotg->regs + GINTSTS); ++ dwc2_writel(GINTSTS_ERLYSUSP, hsotg->regs + GINTSTS); + } + + /* +@@ -2550,7 +2550,7 @@ irq_retry: + if (gintsts & GINTSTS_GOUTNAKEFF) { + dev_info(hsotg->dev, "GOUTNakEff triggered\n"); + +- writel(DCTL_CGOUTNAK, hsotg->regs + DCTL); ++ dwc2_writel(DCTL_CGOUTNAK, hsotg->regs + DCTL); + + s3c_hsotg_dump(hsotg); + } +@@ -2558,7 +2558,7 @@ irq_retry: + if (gintsts & GINTSTS_GINNAKEFF) { + dev_info(hsotg->dev, "GINNakEff triggered\n"); + +- writel(DCTL_CGNPINNAK, hsotg->regs + DCTL); ++ dwc2_writel(DCTL_CGNPINNAK, hsotg->regs + DCTL); + + s3c_hsotg_dump(hsotg); + } +@@ -2616,7 +2616,7 @@ static int s3c_hsotg_ep_enable(struct us + /* note, we handle this here instead of s3c_hsotg_set_ep_maxpacket */ + + epctrl_reg = dir_in ? DIEPCTL(index) : DOEPCTL(index); +- epctrl = readl(hsotg->regs + epctrl_reg); ++ epctrl = dwc2_readl(hsotg->regs + epctrl_reg); + + dev_dbg(hsotg->dev, "%s: read DxEPCTL=0x%08x from 0x%08x\n", + __func__, epctrl, epctrl_reg); +@@ -2700,7 +2700,7 @@ static int s3c_hsotg_ep_enable(struct us + for (i = 1; i < hsotg->num_of_eps; ++i) { + if (hsotg->fifo_map & (1<regs + DPTXFSIZN(i)); ++ val = dwc2_readl(hsotg->regs + DPTXFSIZN(i)); + val = (val >> FIFOSIZE_DEPTH_SHIFT)*4; + if (val < size) + continue; +@@ -2729,9 +2729,9 @@ static int s3c_hsotg_ep_enable(struct us + dev_dbg(hsotg->dev, "%s: write DxEPCTL=0x%08x\n", + __func__, epctrl); + +- writel(epctrl, hsotg->regs + epctrl_reg); ++ dwc2_writel(epctrl, hsotg->regs + epctrl_reg); + dev_dbg(hsotg->dev, "%s: read DxEPCTL=0x%08x\n", +- __func__, readl(hsotg->regs + epctrl_reg)); ++ __func__, dwc2_readl(hsotg->regs + epctrl_reg)); + + /* enable the endpoint interrupt */ + s3c_hsotg_ctrl_epint(hsotg, index, dir_in, 1); +@@ -2770,13 +2770,13 @@ static int s3c_hsotg_ep_disable_force(st + hs_ep->fifo_index = 0; + hs_ep->fifo_size = 0; + +- ctrl = readl(hsotg->regs + epctrl_reg); ++ ctrl = dwc2_readl(hsotg->regs + epctrl_reg); + ctrl &= ~DXEPCTL_EPENA; + ctrl &= ~DXEPCTL_USBACTEP; + ctrl |= DXEPCTL_SNAK; + + dev_dbg(hsotg->dev, "%s: DxEPCTL=0x%08x\n", __func__, ctrl); +- writel(ctrl, hsotg->regs + epctrl_reg); ++ dwc2_writel(ctrl, hsotg->regs + epctrl_reg); + + /* disable endpoint interrupts */ + s3c_hsotg_ctrl_epint(hsotg, hs_ep->index, hs_ep->dir_in, 0); +@@ -2863,7 +2863,7 @@ static int s3c_hsotg_ep_sethalt(struct u + + if (hs_ep->dir_in) { + epreg = DIEPCTL(index); +- epctl = readl(hs->regs + epreg); ++ epctl = dwc2_readl(hs->regs + epreg); + + if (value) { + epctl |= DXEPCTL_STALL + DXEPCTL_SNAK; +@@ -2876,11 +2876,11 @@ static int s3c_hsotg_ep_sethalt(struct u + xfertype == DXEPCTL_EPTYPE_INTERRUPT) + epctl |= DXEPCTL_SETD0PID; + } +- writel(epctl, hs->regs + epreg); ++ dwc2_writel(epctl, hs->regs + epreg); + } else { + + epreg = DOEPCTL(index); +- epctl = readl(hs->regs + epreg); ++ epctl = dwc2_readl(hs->regs + epreg); + + if (value) + epctl |= DXEPCTL_STALL; +@@ -2891,7 +2891,7 @@ static int s3c_hsotg_ep_sethalt(struct u + xfertype == DXEPCTL_EPTYPE_INTERRUPT) + epctl |= DXEPCTL_SETD0PID; + } +- writel(epctl, hs->regs + epreg); ++ dwc2_writel(epctl, hs->regs + epreg); + } + + hs_ep->halted = value; +@@ -2982,15 +2982,15 @@ static void s3c_hsotg_init(struct dwc2_h + u32 trdtim; + /* unmask subset of endpoint interrupts */ + +- writel(DIEPMSK_TIMEOUTMSK | DIEPMSK_AHBERRMSK | ++ dwc2_writel(DIEPMSK_TIMEOUTMSK | DIEPMSK_AHBERRMSK | + DIEPMSK_EPDISBLDMSK | DIEPMSK_XFERCOMPLMSK, + hsotg->regs + DIEPMSK); + +- writel(DOEPMSK_SETUPMSK | DOEPMSK_AHBERRMSK | ++ dwc2_writel(DOEPMSK_SETUPMSK | DOEPMSK_AHBERRMSK | + DOEPMSK_EPDISBLDMSK | DOEPMSK_XFERCOMPLMSK, + hsotg->regs + DOEPMSK); + +- writel(0, hsotg->regs + DAINTMSK); ++ dwc2_writel(0, hsotg->regs + DAINTMSK); + + /* Be in disconnected state until gadget is registered */ + __orr32(hsotg->regs + DCTL, DCTL_SFTDISCON); +@@ -2998,14 +2998,14 @@ static void s3c_hsotg_init(struct dwc2_h + /* setup fifos */ + + dev_dbg(hsotg->dev, "GRXFSIZ=0x%08x, GNPTXFSIZ=0x%08x\n", +- readl(hsotg->regs + GRXFSIZ), +- readl(hsotg->regs + GNPTXFSIZ)); ++ dwc2_readl(hsotg->regs + GRXFSIZ), ++ dwc2_readl(hsotg->regs + GNPTXFSIZ)); + + s3c_hsotg_init_fifo(hsotg); + + /* set the PLL on, remove the HNP/SRP and set the PHY */ + trdtim = (hsotg->phyif == GUSBCFG_PHYIF8) ? 9 : 5; +- writel(hsotg->phyif | GUSBCFG_TOUTCAL(7) | ++ dwc2_writel(hsotg->phyif | GUSBCFG_TOUTCAL(7) | + (trdtim << GUSBCFG_USBTRDTIM_SHIFT), + hsotg->regs + GUSBCFG); + +@@ -3275,9 +3275,9 @@ static void s3c_hsotg_initep(struct dwc2 + if (using_dma(hsotg)) { + u32 next = DXEPCTL_NEXTEP((epnum + 1) % 15); + if (dir_in) +- writel(next, hsotg->regs + DIEPCTL(epnum)); ++ dwc2_writel(next, hsotg->regs + DIEPCTL(epnum)); + else +- writel(next, hsotg->regs + DOEPCTL(epnum)); ++ dwc2_writel(next, hsotg->regs + DOEPCTL(epnum)); + } + } + +@@ -3295,7 +3295,7 @@ static int s3c_hsotg_hw_cfg(struct dwc2_ + + /* check hardware configuration */ + +- cfg = readl(hsotg->regs + GHWCFG2); ++ cfg = dwc2_readl(hsotg->regs + GHWCFG2); + hsotg->num_of_eps = (cfg >> GHWCFG2_NUM_DEV_EP_SHIFT) & 0xF; + /* Add ep0 */ + hsotg->num_of_eps++; +@@ -3307,7 +3307,7 @@ static int s3c_hsotg_hw_cfg(struct dwc2_ + /* Same s3c_hsotg_ep is used in both directions for ep0 */ + hsotg->eps_out[0] = hsotg->eps_in[0]; + +- cfg = readl(hsotg->regs + GHWCFG1); ++ cfg = dwc2_readl(hsotg->regs + GHWCFG1); + for (i = 1, cfg >>= 2; i < hsotg->num_of_eps; i++, cfg >>= 2) { + ep_type = cfg & 3; + /* Direction in or both */ +@@ -3326,10 +3326,10 @@ static int s3c_hsotg_hw_cfg(struct dwc2_ + } + } + +- cfg = readl(hsotg->regs + GHWCFG3); ++ cfg = dwc2_readl(hsotg->regs + GHWCFG3); + hsotg->fifo_mem = (cfg >> GHWCFG3_DFIFO_DEPTH_SHIFT); + +- cfg = readl(hsotg->regs + GHWCFG4); ++ cfg = dwc2_readl(hsotg->regs + GHWCFG4); + hsotg->dedicated_fifos = (cfg >> GHWCFG4_DED_FIFO_SHIFT) & 1; + + dev_info(hsotg->dev, "EPs: %d, %s fifos, %d entries in SPRAM\n", +@@ -3352,19 +3352,19 @@ static void s3c_hsotg_dump(struct dwc2_h + int idx; + + dev_info(dev, "DCFG=0x%08x, DCTL=0x%08x, DIEPMSK=%08x\n", +- readl(regs + DCFG), readl(regs + DCTL), +- readl(regs + DIEPMSK)); ++ dwc2_readl(regs + DCFG), dwc2_readl(regs + DCTL), ++ dwc2_readl(regs + DIEPMSK)); + + dev_info(dev, "GAHBCFG=0x%08x, GHWCFG1=0x%08x\n", +- readl(regs + GAHBCFG), readl(regs + GHWCFG1)); ++ dwc2_readl(regs + GAHBCFG), dwc2_readl(regs + GHWCFG1)); + + dev_info(dev, "GRXFSIZ=0x%08x, GNPTXFSIZ=0x%08x\n", +- readl(regs + GRXFSIZ), readl(regs + GNPTXFSIZ)); ++ dwc2_readl(regs + GRXFSIZ), dwc2_readl(regs + GNPTXFSIZ)); + + /* show periodic fifo settings */ + + for (idx = 1; idx < hsotg->num_of_eps; idx++) { +- val = readl(regs + DPTXFSIZN(idx)); ++ val = dwc2_readl(regs + DPTXFSIZN(idx)); + dev_info(dev, "DPTx[%d] FSize=%d, StAddr=0x%08x\n", idx, + val >> FIFOSIZE_DEPTH_SHIFT, + val & FIFOSIZE_STARTADDR_MASK); +@@ -3373,21 +3373,21 @@ static void s3c_hsotg_dump(struct dwc2_h + for (idx = 0; idx < hsotg->num_of_eps; idx++) { + dev_info(dev, + "ep%d-in: EPCTL=0x%08x, SIZ=0x%08x, DMA=0x%08x\n", idx, +- readl(regs + DIEPCTL(idx)), +- readl(regs + DIEPTSIZ(idx)), +- readl(regs + DIEPDMA(idx))); ++ dwc2_readl(regs + DIEPCTL(idx)), ++ dwc2_readl(regs + DIEPTSIZ(idx)), ++ dwc2_readl(regs + DIEPDMA(idx))); + +- val = readl(regs + DOEPCTL(idx)); ++ val = dwc2_readl(regs + DOEPCTL(idx)); + dev_info(dev, + "ep%d-out: EPCTL=0x%08x, SIZ=0x%08x, DMA=0x%08x\n", +- idx, readl(regs + DOEPCTL(idx)), +- readl(regs + DOEPTSIZ(idx)), +- readl(regs + DOEPDMA(idx))); ++ idx, dwc2_readl(regs + DOEPCTL(idx)), ++ dwc2_readl(regs + DOEPTSIZ(idx)), ++ dwc2_readl(regs + DOEPDMA(idx))); + + } + + dev_info(dev, "DVBUSDIS=0x%08x, DVBUSPULSE=%08x\n", +- readl(regs + DVBUSDIS), readl(regs + DVBUSPULSE)); ++ dwc2_readl(regs + DVBUSDIS), dwc2_readl(regs + DVBUSPULSE)); + #endif + } + +@@ -3443,7 +3443,7 @@ static int testmode_show(struct seq_file + int dctl; + + spin_lock_irqsave(&hsotg->lock, flags); +- dctl = readl(hsotg->regs + DCTL); ++ dctl = dwc2_readl(hsotg->regs + DCTL); + dctl &= DCTL_TSTCTL_MASK; + dctl >>= DCTL_TSTCTL_SHIFT; + spin_unlock_irqrestore(&hsotg->lock, flags); +@@ -3504,38 +3504,38 @@ static int state_show(struct seq_file *s + int idx; + + seq_printf(seq, "DCFG=0x%08x, DCTL=0x%08x, DSTS=0x%08x\n", +- readl(regs + DCFG), +- readl(regs + DCTL), +- readl(regs + DSTS)); ++ dwc2_readl(regs + DCFG), ++ dwc2_readl(regs + DCTL), ++ dwc2_readl(regs + DSTS)); + + seq_printf(seq, "DIEPMSK=0x%08x, DOEPMASK=0x%08x\n", +- readl(regs + DIEPMSK), readl(regs + DOEPMSK)); ++ dwc2_readl(regs + DIEPMSK), dwc2_readl(regs + DOEPMSK)); + + seq_printf(seq, "GINTMSK=0x%08x, GINTSTS=0x%08x\n", +- readl(regs + GINTMSK), +- readl(regs + GINTSTS)); ++ dwc2_readl(regs + GINTMSK), ++ dwc2_readl(regs + GINTSTS)); + + seq_printf(seq, "DAINTMSK=0x%08x, DAINT=0x%08x\n", +- readl(regs + DAINTMSK), +- readl(regs + DAINT)); ++ dwc2_readl(regs + DAINTMSK), ++ dwc2_readl(regs + DAINT)); + + seq_printf(seq, "GNPTXSTS=0x%08x, GRXSTSR=%08x\n", +- readl(regs + GNPTXSTS), +- readl(regs + GRXSTSR)); ++ dwc2_readl(regs + GNPTXSTS), ++ dwc2_readl(regs + GRXSTSR)); + + seq_puts(seq, "\nEndpoint status:\n"); + + for (idx = 0; idx < hsotg->num_of_eps; idx++) { + u32 in, out; + +- in = readl(regs + DIEPCTL(idx)); +- out = readl(regs + DOEPCTL(idx)); ++ in = dwc2_readl(regs + DIEPCTL(idx)); ++ out = dwc2_readl(regs + DOEPCTL(idx)); + + seq_printf(seq, "ep%d: DIEPCTL=0x%08x, DOEPCTL=0x%08x", + idx, in, out); + +- in = readl(regs + DIEPTSIZ(idx)); +- out = readl(regs + DOEPTSIZ(idx)); ++ in = dwc2_readl(regs + DIEPTSIZ(idx)); ++ out = dwc2_readl(regs + DOEPTSIZ(idx)); + + seq_printf(seq, ", DIEPTSIZ=0x%08x, DOEPTSIZ=0x%08x", + in, out); +@@ -3575,9 +3575,9 @@ static int fifo_show(struct seq_file *se + int idx; + + seq_puts(seq, "Non-periodic FIFOs:\n"); +- seq_printf(seq, "RXFIFO: Size %d\n", readl(regs + GRXFSIZ)); ++ seq_printf(seq, "RXFIFO: Size %d\n", dwc2_readl(regs + GRXFSIZ)); + +- val = readl(regs + GNPTXFSIZ); ++ val = dwc2_readl(regs + GNPTXFSIZ); + seq_printf(seq, "NPTXFIFO: Size %d, Start 0x%08x\n", + val >> FIFOSIZE_DEPTH_SHIFT, + val & FIFOSIZE_DEPTH_MASK); +@@ -3585,7 +3585,7 @@ static int fifo_show(struct seq_file *se + seq_puts(seq, "\nPeriodic TXFIFOs:\n"); + + for (idx = 1; idx < hsotg->num_of_eps; idx++) { +- val = readl(regs + DPTXFSIZN(idx)); ++ val = dwc2_readl(regs + DPTXFSIZN(idx)); + + seq_printf(seq, "\tDPTXFIFO%2d: Size %d, Start 0x%08x\n", idx, + val >> FIFOSIZE_DEPTH_SHIFT, +@@ -3638,20 +3638,20 @@ static int ep_show(struct seq_file *seq, + /* first show the register state */ + + seq_printf(seq, "\tDIEPCTL=0x%08x, DOEPCTL=0x%08x\n", +- readl(regs + DIEPCTL(index)), +- readl(regs + DOEPCTL(index))); ++ dwc2_readl(regs + DIEPCTL(index)), ++ dwc2_readl(regs + DOEPCTL(index))); + + seq_printf(seq, "\tDIEPDMA=0x%08x, DOEPDMA=0x%08x\n", +- readl(regs + DIEPDMA(index)), +- readl(regs + DOEPDMA(index))); ++ dwc2_readl(regs + DIEPDMA(index)), ++ dwc2_readl(regs + DOEPDMA(index))); + + seq_printf(seq, "\tDIEPINT=0x%08x, DOEPINT=0x%08x\n", +- readl(regs + DIEPINT(index)), +- readl(regs + DOEPINT(index))); ++ dwc2_readl(regs + DIEPINT(index)), ++ dwc2_readl(regs + DOEPINT(index))); + + seq_printf(seq, "\tDIEPTSIZ=0x%08x, DOEPTSIZ=0x%08x\n", +- readl(regs + DIEPTSIZ(index)), +- readl(regs + DOEPTSIZ(index))); ++ dwc2_readl(regs + DIEPTSIZ(index)), ++ dwc2_readl(regs + DOEPTSIZ(index))); + + seq_puts(seq, "\n"); + seq_printf(seq, "mps %d\n", ep->ep.maxpacket); +--- a/drivers/usb/dwc2/hcd.c ++++ b/drivers/usb/dwc2/hcd.c +@@ -80,10 +80,10 @@ static void dwc2_dump_channel_info(struc + if (chan == NULL) + return; + +- hcchar = readl(hsotg->regs + HCCHAR(chan->hc_num)); +- hcsplt = readl(hsotg->regs + HCSPLT(chan->hc_num)); +- hctsiz = readl(hsotg->regs + HCTSIZ(chan->hc_num)); +- hc_dma = readl(hsotg->regs + HCDMA(chan->hc_num)); ++ hcchar = dwc2_readl(hsotg->regs + HCCHAR(chan->hc_num)); ++ hcsplt = dwc2_readl(hsotg->regs + HCSPLT(chan->hc_num)); ++ hctsiz = dwc2_readl(hsotg->regs + HCTSIZ(chan->hc_num)); ++ hc_dma = dwc2_readl(hsotg->regs + HCDMA(chan->hc_num)); + + dev_dbg(hsotg->dev, " Assigned to channel %p:\n", chan); + dev_dbg(hsotg->dev, " hcchar 0x%08x, hcsplt 0x%08x\n", +@@ -207,7 +207,7 @@ void dwc2_hcd_start(struct dwc2_hsotg *h + */ + hprt0 = dwc2_read_hprt0(hsotg); + hprt0 |= HPRT0_RST; +- writel(hprt0, hsotg->regs + HPRT0); ++ dwc2_writel(hprt0, hsotg->regs + HPRT0); + } + + queue_delayed_work(hsotg->wq_otg, &hsotg->start_work, +@@ -228,11 +228,11 @@ static void dwc2_hcd_cleanup_channels(st + channel = hsotg->hc_ptr_array[i]; + if (!list_empty(&channel->hc_list_entry)) + continue; +- hcchar = readl(hsotg->regs + HCCHAR(i)); ++ hcchar = dwc2_readl(hsotg->regs + HCCHAR(i)); + if (hcchar & HCCHAR_CHENA) { + hcchar &= ~(HCCHAR_CHENA | HCCHAR_EPDIR); + hcchar |= HCCHAR_CHDIS; +- writel(hcchar, hsotg->regs + HCCHAR(i)); ++ dwc2_writel(hcchar, hsotg->regs + HCCHAR(i)); + } + } + } +@@ -241,11 +241,11 @@ static void dwc2_hcd_cleanup_channels(st + channel = hsotg->hc_ptr_array[i]; + if (!list_empty(&channel->hc_list_entry)) + continue; +- hcchar = readl(hsotg->regs + HCCHAR(i)); ++ hcchar = dwc2_readl(hsotg->regs + HCCHAR(i)); + if (hcchar & HCCHAR_CHENA) { + /* Halt the channel */ + hcchar |= HCCHAR_CHDIS; +- writel(hcchar, hsotg->regs + HCCHAR(i)); ++ dwc2_writel(hcchar, hsotg->regs + HCCHAR(i)); + } + + dwc2_hc_cleanup(hsotg, channel); +@@ -287,11 +287,11 @@ void dwc2_hcd_disconnect(struct dwc2_hso + * interrupt mask and status bits and disabling subsequent host + * channel interrupts. + */ +- intr = readl(hsotg->regs + GINTMSK); ++ intr = dwc2_readl(hsotg->regs + GINTMSK); + intr &= ~(GINTSTS_NPTXFEMP | GINTSTS_PTXFEMP | GINTSTS_HCHINT); +- writel(intr, hsotg->regs + GINTMSK); ++ dwc2_writel(intr, hsotg->regs + GINTMSK); + intr = GINTSTS_NPTXFEMP | GINTSTS_PTXFEMP | GINTSTS_HCHINT; +- writel(intr, hsotg->regs + GINTSTS); ++ dwc2_writel(intr, hsotg->regs + GINTSTS); + + /* + * Turn off the vbus power only if the core has transitioned to device +@@ -301,7 +301,7 @@ void dwc2_hcd_disconnect(struct dwc2_hso + if (dwc2_is_device_mode(hsotg)) { + if (hsotg->op_state != OTG_STATE_A_SUSPEND) { + dev_dbg(hsotg->dev, "Disconnect: PortPower off\n"); +- writel(0, hsotg->regs + HPRT0); ++ dwc2_writel(0, hsotg->regs + HPRT0); + } + + dwc2_disable_host_interrupts(hsotg); +@@ -354,7 +354,7 @@ void dwc2_hcd_stop(struct dwc2_hsotg *hs + + /* Turn off the vbus power */ + dev_dbg(hsotg->dev, "PortPower off\n"); +- writel(0, hsotg->regs + HPRT0); ++ dwc2_writel(0, hsotg->regs + HPRT0); + } + + static int dwc2_hcd_urb_enqueue(struct dwc2_hsotg *hsotg, +@@ -379,7 +379,7 @@ static int dwc2_hcd_urb_enqueue(struct d + if ((dev_speed == USB_SPEED_LOW) && + (hsotg->hw_params.fs_phy_type == GHWCFG2_FS_PHY_TYPE_DEDICATED) && + (hsotg->hw_params.hs_phy_type == GHWCFG2_HS_PHY_TYPE_UTMI)) { +- u32 hprt0 = readl(hsotg->regs + HPRT0); ++ u32 hprt0 = dwc2_readl(hsotg->regs + HPRT0); + u32 prtspd = (hprt0 & HPRT0_SPD_MASK) >> HPRT0_SPD_SHIFT; + + if (prtspd == HPRT0_SPD_FULL_SPEED) +@@ -401,7 +401,7 @@ static int dwc2_hcd_urb_enqueue(struct d + return retval; + } + +- intr_mask = readl(hsotg->regs + GINTMSK); ++ intr_mask = dwc2_readl(hsotg->regs + GINTMSK); + if (!(intr_mask & GINTSTS_SOF)) { + enum dwc2_transaction_type tr_type; + +@@ -1069,7 +1069,7 @@ static void dwc2_process_periodic_channe + if (dbg_perio()) + dev_vdbg(hsotg->dev, "Queue periodic transactions\n"); + +- tx_status = readl(hsotg->regs + HPTXSTS); ++ tx_status = dwc2_readl(hsotg->regs + HPTXSTS); + qspcavail = (tx_status & TXSTS_QSPCAVAIL_MASK) >> + TXSTS_QSPCAVAIL_SHIFT; + fspcavail = (tx_status & TXSTS_FSPCAVAIL_MASK) >> +@@ -1084,7 +1084,7 @@ static void dwc2_process_periodic_channe + + qh_ptr = hsotg->periodic_sched_assigned.next; + while (qh_ptr != &hsotg->periodic_sched_assigned) { +- tx_status = readl(hsotg->regs + HPTXSTS); ++ tx_status = dwc2_readl(hsotg->regs + HPTXSTS); + qspcavail = (tx_status & TXSTS_QSPCAVAIL_MASK) >> + TXSTS_QSPCAVAIL_SHIFT; + if (qspcavail == 0) { +@@ -1144,7 +1144,7 @@ static void dwc2_process_periodic_channe + } + + if (hsotg->core_params->dma_enable <= 0) { +- tx_status = readl(hsotg->regs + HPTXSTS); ++ tx_status = dwc2_readl(hsotg->regs + HPTXSTS); + qspcavail = (tx_status & TXSTS_QSPCAVAIL_MASK) >> + TXSTS_QSPCAVAIL_SHIFT; + fspcavail = (tx_status & TXSTS_FSPCAVAIL_MASK) >> +@@ -1167,9 +1167,9 @@ static void dwc2_process_periodic_channe + * level to ensure that new requests are loaded as + * soon as possible.) + */ +- gintmsk = readl(hsotg->regs + GINTMSK); ++ gintmsk = dwc2_readl(hsotg->regs + GINTMSK); + gintmsk |= GINTSTS_PTXFEMP; +- writel(gintmsk, hsotg->regs + GINTMSK); ++ dwc2_writel(gintmsk, hsotg->regs + GINTMSK); + } else { + /* + * Disable the Tx FIFO empty interrupt since there are +@@ -1178,9 +1178,9 @@ static void dwc2_process_periodic_channe + * handlers to queue more transactions as transfer + * states change. + */ +- gintmsk = readl(hsotg->regs + GINTMSK); ++ gintmsk = dwc2_readl(hsotg->regs + GINTMSK); + gintmsk &= ~GINTSTS_PTXFEMP; +- writel(gintmsk, hsotg->regs + GINTMSK); ++ dwc2_writel(gintmsk, hsotg->regs + GINTMSK); + } + } + } +@@ -1209,7 +1209,7 @@ static void dwc2_process_non_periodic_ch + + dev_vdbg(hsotg->dev, "Queue non-periodic transactions\n"); + +- tx_status = readl(hsotg->regs + GNPTXSTS); ++ tx_status = dwc2_readl(hsotg->regs + GNPTXSTS); + qspcavail = (tx_status & TXSTS_QSPCAVAIL_MASK) >> + TXSTS_QSPCAVAIL_SHIFT; + fspcavail = (tx_status & TXSTS_FSPCAVAIL_MASK) >> +@@ -1232,7 +1232,7 @@ static void dwc2_process_non_periodic_ch + * available in the request queue or the Tx FIFO + */ + do { +- tx_status = readl(hsotg->regs + GNPTXSTS); ++ tx_status = dwc2_readl(hsotg->regs + GNPTXSTS); + qspcavail = (tx_status & TXSTS_QSPCAVAIL_MASK) >> + TXSTS_QSPCAVAIL_SHIFT; + if (hsotg->core_params->dma_enable <= 0 && qspcavail == 0) { +@@ -1269,7 +1269,7 @@ next: + } while (hsotg->non_periodic_qh_ptr != orig_qh_ptr); + + if (hsotg->core_params->dma_enable <= 0) { +- tx_status = readl(hsotg->regs + GNPTXSTS); ++ tx_status = dwc2_readl(hsotg->regs + GNPTXSTS); + qspcavail = (tx_status & TXSTS_QSPCAVAIL_MASK) >> + TXSTS_QSPCAVAIL_SHIFT; + fspcavail = (tx_status & TXSTS_FSPCAVAIL_MASK) >> +@@ -1289,9 +1289,9 @@ next: + * level to ensure that new requests are loaded as + * soon as possible.) + */ +- gintmsk = readl(hsotg->regs + GINTMSK); ++ gintmsk = dwc2_readl(hsotg->regs + GINTMSK); + gintmsk |= GINTSTS_NPTXFEMP; +- writel(gintmsk, hsotg->regs + GINTMSK); ++ dwc2_writel(gintmsk, hsotg->regs + GINTMSK); + } else { + /* + * Disable the Tx FIFO empty interrupt since there are +@@ -1300,9 +1300,9 @@ next: + * handlers to queue more transactions as transfer + * states change. + */ +- gintmsk = readl(hsotg->regs + GINTMSK); ++ gintmsk = dwc2_readl(hsotg->regs + GINTMSK); + gintmsk &= ~GINTSTS_NPTXFEMP; +- writel(gintmsk, hsotg->regs + GINTMSK); ++ dwc2_writel(gintmsk, hsotg->regs + GINTMSK); + } + } + } +@@ -1340,10 +1340,10 @@ void dwc2_hcd_queue_transactions(struct + * Ensure NP Tx FIFO empty interrupt is disabled when + * there are no non-periodic transfers to process + */ +- u32 gintmsk = readl(hsotg->regs + GINTMSK); ++ u32 gintmsk = dwc2_readl(hsotg->regs + GINTMSK); + + gintmsk &= ~GINTSTS_NPTXFEMP; +- writel(gintmsk, hsotg->regs + GINTMSK); ++ dwc2_writel(gintmsk, hsotg->regs + GINTMSK); + } + } + } +@@ -1357,7 +1357,7 @@ static void dwc2_conn_id_status_change(s + + dev_dbg(hsotg->dev, "%s()\n", __func__); + +- gotgctl = readl(hsotg->regs + GOTGCTL); ++ gotgctl = dwc2_readl(hsotg->regs + GOTGCTL); + dev_dbg(hsotg->dev, "gotgctl=%0x\n", gotgctl); + dev_dbg(hsotg->dev, "gotgctl.b.conidsts=%d\n", + !!(gotgctl & GOTGCTL_CONID_B)); +@@ -1420,9 +1420,9 @@ static void dwc2_wakeup_detected(unsigne + hprt0 = dwc2_read_hprt0(hsotg); + dev_dbg(hsotg->dev, "Resume: HPRT0=%0x\n", hprt0); + hprt0 &= ~HPRT0_RES; +- writel(hprt0, hsotg->regs + HPRT0); ++ dwc2_writel(hprt0, hsotg->regs + HPRT0); + dev_dbg(hsotg->dev, "Clear Resume: HPRT0=%0x\n", +- readl(hsotg->regs + HPRT0)); ++ dwc2_readl(hsotg->regs + HPRT0)); + + dwc2_hcd_rem_wakeup(hsotg); + +@@ -1450,30 +1450,30 @@ static void dwc2_port_suspend(struct dwc + spin_lock_irqsave(&hsotg->lock, flags); + + if (windex == hsotg->otg_port && dwc2_host_is_b_hnp_enabled(hsotg)) { +- gotgctl = readl(hsotg->regs + GOTGCTL); ++ gotgctl = dwc2_readl(hsotg->regs + GOTGCTL); + gotgctl |= GOTGCTL_HSTSETHNPEN; +- writel(gotgctl, hsotg->regs + GOTGCTL); ++ dwc2_writel(gotgctl, hsotg->regs + GOTGCTL); + hsotg->op_state = OTG_STATE_A_SUSPEND; + } + + hprt0 = dwc2_read_hprt0(hsotg); + hprt0 |= HPRT0_SUSP; +- writel(hprt0, hsotg->regs + HPRT0); ++ dwc2_writel(hprt0, hsotg->regs + HPRT0); + + /* Update lx_state */ + hsotg->lx_state = DWC2_L2; + + /* Suspend the Phy Clock */ +- pcgctl = readl(hsotg->regs + PCGCTL); ++ pcgctl = dwc2_readl(hsotg->regs + PCGCTL); + pcgctl |= PCGCTL_STOPPCLK; +- writel(pcgctl, hsotg->regs + PCGCTL); ++ dwc2_writel(pcgctl, hsotg->regs + PCGCTL); + udelay(10); + + /* For HNP the bus must be suspended for at least 200ms */ + if (dwc2_host_is_b_hnp_enabled(hsotg)) { +- pcgctl = readl(hsotg->regs + PCGCTL); ++ pcgctl = dwc2_readl(hsotg->regs + PCGCTL); + pcgctl &= ~PCGCTL_STOPPCLK; +- writel(pcgctl, hsotg->regs + PCGCTL); ++ dwc2_writel(pcgctl, hsotg->regs + PCGCTL); + + spin_unlock_irqrestore(&hsotg->lock, flags); + +@@ -1522,23 +1522,23 @@ static int dwc2_hcd_hub_control(struct d + "ClearPortFeature USB_PORT_FEAT_ENABLE\n"); + hprt0 = dwc2_read_hprt0(hsotg); + hprt0 |= HPRT0_ENA; +- writel(hprt0, hsotg->regs + HPRT0); ++ dwc2_writel(hprt0, hsotg->regs + HPRT0); + break; + + case USB_PORT_FEAT_SUSPEND: + dev_dbg(hsotg->dev, + "ClearPortFeature USB_PORT_FEAT_SUSPEND\n"); +- writel(0, hsotg->regs + PCGCTL); ++ dwc2_writel(0, hsotg->regs + PCGCTL); + usleep_range(20000, 40000); + + hprt0 = dwc2_read_hprt0(hsotg); + hprt0 |= HPRT0_RES; +- writel(hprt0, hsotg->regs + HPRT0); ++ dwc2_writel(hprt0, hsotg->regs + HPRT0); + hprt0 &= ~HPRT0_SUSP; + msleep(USB_RESUME_TIMEOUT); + + hprt0 &= ~HPRT0_RES; +- writel(hprt0, hsotg->regs + HPRT0); ++ dwc2_writel(hprt0, hsotg->regs + HPRT0); + break; + + case USB_PORT_FEAT_POWER: +@@ -1546,7 +1546,7 @@ static int dwc2_hcd_hub_control(struct d + "ClearPortFeature USB_PORT_FEAT_POWER\n"); + hprt0 = dwc2_read_hprt0(hsotg); + hprt0 &= ~HPRT0_PWR; +- writel(hprt0, hsotg->regs + HPRT0); ++ dwc2_writel(hprt0, hsotg->regs + HPRT0); + break; + + case USB_PORT_FEAT_INDICATOR: +@@ -1667,7 +1667,7 @@ static int dwc2_hcd_hub_control(struct d + break; + } + +- hprt0 = readl(hsotg->regs + HPRT0); ++ hprt0 = dwc2_readl(hsotg->regs + HPRT0); + dev_vdbg(hsotg->dev, " HPRT0: 0x%08x\n", hprt0); + + if (hprt0 & HPRT0_CONNSTS) +@@ -1732,18 +1732,18 @@ static int dwc2_hcd_hub_control(struct d + "SetPortFeature - USB_PORT_FEAT_POWER\n"); + hprt0 = dwc2_read_hprt0(hsotg); + hprt0 |= HPRT0_PWR; +- writel(hprt0, hsotg->regs + HPRT0); ++ dwc2_writel(hprt0, hsotg->regs + HPRT0); + break; + + case USB_PORT_FEAT_RESET: + hprt0 = dwc2_read_hprt0(hsotg); + dev_dbg(hsotg->dev, + "SetPortFeature - USB_PORT_FEAT_RESET\n"); +- pcgctl = readl(hsotg->regs + PCGCTL); ++ pcgctl = dwc2_readl(hsotg->regs + PCGCTL); + pcgctl &= ~(PCGCTL_ENBL_SLEEP_GATING | PCGCTL_STOPPCLK); +- writel(pcgctl, hsotg->regs + PCGCTL); ++ dwc2_writel(pcgctl, hsotg->regs + PCGCTL); + /* ??? Original driver does this */ +- writel(0, hsotg->regs + PCGCTL); ++ dwc2_writel(0, hsotg->regs + PCGCTL); + + hprt0 = dwc2_read_hprt0(hsotg); + /* Clear suspend bit if resetting from suspend state */ +@@ -1758,13 +1758,13 @@ static int dwc2_hcd_hub_control(struct d + hprt0 |= HPRT0_PWR | HPRT0_RST; + dev_dbg(hsotg->dev, + "In host mode, hprt0=%08x\n", hprt0); +- writel(hprt0, hsotg->regs + HPRT0); ++ dwc2_writel(hprt0, hsotg->regs + HPRT0); + } + + /* Clear reset bit in 10ms (FS/LS) or 50ms (HS) */ + usleep_range(50000, 70000); + hprt0 &= ~HPRT0_RST; +- writel(hprt0, hsotg->regs + HPRT0); ++ dwc2_writel(hprt0, hsotg->regs + HPRT0); + hsotg->lx_state = DWC2_L0; /* Now back to On state */ + break; + +@@ -1828,7 +1828,7 @@ static int dwc2_hcd_is_status_changed(st + + int dwc2_hcd_get_frame_number(struct dwc2_hsotg *hsotg) + { +- u32 hfnum = readl(hsotg->regs + HFNUM); ++ u32 hfnum = dwc2_readl(hsotg->regs + HFNUM); + + #ifdef DWC2_DEBUG_SOF + dev_vdbg(hsotg->dev, "DWC OTG HCD GET FRAME NUMBER %d\n", +@@ -1931,11 +1931,11 @@ void dwc2_hcd_dump_state(struct dwc2_hso + if (chan->xfer_started) { + u32 hfnum, hcchar, hctsiz, hcint, hcintmsk; + +- hfnum = readl(hsotg->regs + HFNUM); +- hcchar = readl(hsotg->regs + HCCHAR(i)); +- hctsiz = readl(hsotg->regs + HCTSIZ(i)); +- hcint = readl(hsotg->regs + HCINT(i)); +- hcintmsk = readl(hsotg->regs + HCINTMSK(i)); ++ hfnum = dwc2_readl(hsotg->regs + HFNUM); ++ hcchar = dwc2_readl(hsotg->regs + HCCHAR(i)); ++ hctsiz = dwc2_readl(hsotg->regs + HCTSIZ(i)); ++ hcint = dwc2_readl(hsotg->regs + HCINT(i)); ++ hcintmsk = dwc2_readl(hsotg->regs + HCINTMSK(i)); + dev_dbg(hsotg->dev, " hfnum: 0x%08x\n", hfnum); + dev_dbg(hsotg->dev, " hcchar: 0x%08x\n", hcchar); + dev_dbg(hsotg->dev, " hctsiz: 0x%08x\n", hctsiz); +@@ -1983,12 +1983,12 @@ void dwc2_hcd_dump_state(struct dwc2_hso + dev_dbg(hsotg->dev, " periodic_channels: %d\n", + hsotg->periodic_channels); + dev_dbg(hsotg->dev, " periodic_usecs: %d\n", hsotg->periodic_usecs); +- np_tx_status = readl(hsotg->regs + GNPTXSTS); ++ np_tx_status = dwc2_readl(hsotg->regs + GNPTXSTS); + dev_dbg(hsotg->dev, " NP Tx Req Queue Space Avail: %d\n", + (np_tx_status & TXSTS_QSPCAVAIL_MASK) >> TXSTS_QSPCAVAIL_SHIFT); + dev_dbg(hsotg->dev, " NP Tx FIFO Space Avail: %d\n", + (np_tx_status & TXSTS_FSPCAVAIL_MASK) >> TXSTS_FSPCAVAIL_SHIFT); +- p_tx_status = readl(hsotg->regs + HPTXSTS); ++ p_tx_status = dwc2_readl(hsotg->regs + HPTXSTS); + dev_dbg(hsotg->dev, " P Tx Req Queue Space Avail: %d\n", + (p_tx_status & TXSTS_QSPCAVAIL_MASK) >> TXSTS_QSPCAVAIL_SHIFT); + dev_dbg(hsotg->dev, " P Tx FIFO Space Avail: %d\n", +@@ -2252,7 +2252,7 @@ static void dwc2_hcd_reset_func(struct w + dev_dbg(hsotg->dev, "USB RESET function called\n"); + hprt0 = dwc2_read_hprt0(hsotg); + hprt0 &= ~HPRT0_RST; +- writel(hprt0, hsotg->regs + HPRT0); ++ dwc2_writel(hprt0, hsotg->regs + HPRT0); + hsotg->flags.b.port_reset_change = 1; + } + +@@ -2729,17 +2729,17 @@ static void dwc2_hcd_free(struct dwc2_hs + hsotg->status_buf = NULL; + } + +- ahbcfg = readl(hsotg->regs + GAHBCFG); ++ ahbcfg = dwc2_readl(hsotg->regs + GAHBCFG); + + /* Disable all interrupts */ + ahbcfg &= ~GAHBCFG_GLBL_INTR_EN; +- writel(ahbcfg, hsotg->regs + GAHBCFG); +- writel(0, hsotg->regs + GINTMSK); ++ dwc2_writel(ahbcfg, hsotg->regs + GAHBCFG); ++ dwc2_writel(0, hsotg->regs + GINTMSK); + + if (hsotg->hw_params.snpsid >= DWC2_CORE_REV_3_00a) { +- dctl = readl(hsotg->regs + DCTL); ++ dctl = dwc2_readl(hsotg->regs + DCTL); + dctl |= DCTL_SFTDISCON; +- writel(dctl, hsotg->regs + DCTL); ++ dwc2_writel(dctl, hsotg->regs + DCTL); + } + + if (hsotg->wq_otg) { +@@ -2805,7 +2805,7 @@ int dwc2_hcd_init(struct dwc2_hsotg *hso + + retval = -ENOMEM; + +- hcfg = readl(hsotg->regs + HCFG); ++ hcfg = dwc2_readl(hsotg->regs + HCFG); + dev_dbg(hsotg->dev, "hcfg=%08x\n", hcfg); + + #ifdef CONFIG_USB_DWC2_TRACK_MISSED_SOFS +--- a/drivers/usb/dwc2/hcd_ddma.c ++++ b/drivers/usb/dwc2/hcd_ddma.c +@@ -169,19 +169,19 @@ static void dwc2_per_sched_enable(struct + + spin_lock_irqsave(&hsotg->lock, flags); + +- hcfg = readl(hsotg->regs + HCFG); ++ hcfg = dwc2_readl(hsotg->regs + HCFG); + if (hcfg & HCFG_PERSCHEDENA) { + /* already enabled */ + spin_unlock_irqrestore(&hsotg->lock, flags); + return; + } + +- writel(hsotg->frame_list_dma, hsotg->regs + HFLBADDR); ++ dwc2_writel(hsotg->frame_list_dma, hsotg->regs + HFLBADDR); + + hcfg &= ~HCFG_FRLISTEN_MASK; + hcfg |= fr_list_en | HCFG_PERSCHEDENA; + dev_vdbg(hsotg->dev, "Enabling Periodic schedule\n"); +- writel(hcfg, hsotg->regs + HCFG); ++ dwc2_writel(hcfg, hsotg->regs + HCFG); + + spin_unlock_irqrestore(&hsotg->lock, flags); + } +@@ -193,7 +193,7 @@ static void dwc2_per_sched_disable(struc + + spin_lock_irqsave(&hsotg->lock, flags); + +- hcfg = readl(hsotg->regs + HCFG); ++ hcfg = dwc2_readl(hsotg->regs + HCFG); + if (!(hcfg & HCFG_PERSCHEDENA)) { + /* already disabled */ + spin_unlock_irqrestore(&hsotg->lock, flags); +@@ -202,7 +202,7 @@ static void dwc2_per_sched_disable(struc + + hcfg &= ~HCFG_PERSCHEDENA; + dev_vdbg(hsotg->dev, "Disabling Periodic schedule\n"); +- writel(hcfg, hsotg->regs + HCFG); ++ dwc2_writel(hcfg, hsotg->regs + HCFG); + + spin_unlock_irqrestore(&hsotg->lock, flags); + } +--- a/drivers/usb/dwc2/hcd.h ++++ b/drivers/usb/dwc2/hcd.h +@@ -371,10 +371,10 @@ static inline struct usb_hcd *dwc2_hsotg + */ + static inline void disable_hc_int(struct dwc2_hsotg *hsotg, int chnum, u32 intr) + { +- u32 mask = readl(hsotg->regs + HCINTMSK(chnum)); ++ u32 mask = dwc2_readl(hsotg->regs + HCINTMSK(chnum)); + + mask &= ~intr; +- writel(mask, hsotg->regs + HCINTMSK(chnum)); ++ dwc2_writel(mask, hsotg->regs + HCINTMSK(chnum)); + } + + /* +@@ -382,11 +382,11 @@ static inline void disable_hc_int(struct + */ + static inline int dwc2_is_host_mode(struct dwc2_hsotg *hsotg) + { +- return (readl(hsotg->regs + GINTSTS) & GINTSTS_CURMODE_HOST) != 0; ++ return (dwc2_readl(hsotg->regs + GINTSTS) & GINTSTS_CURMODE_HOST) != 0; + } + static inline int dwc2_is_device_mode(struct dwc2_hsotg *hsotg) + { +- return (readl(hsotg->regs + GINTSTS) & GINTSTS_CURMODE_HOST) == 0; ++ return (dwc2_readl(hsotg->regs + GINTSTS) & GINTSTS_CURMODE_HOST) == 0; + } + + /* +@@ -395,7 +395,7 @@ static inline int dwc2_is_device_mode(st + */ + static inline u32 dwc2_read_hprt0(struct dwc2_hsotg *hsotg) + { +- u32 hprt0 = readl(hsotg->regs + HPRT0); ++ u32 hprt0 = dwc2_readl(hsotg->regs + HPRT0); + + hprt0 &= ~(HPRT0_ENA | HPRT0_CONNDET | HPRT0_ENACHG | HPRT0_OVRCURRCHG); + return hprt0; +@@ -582,7 +582,7 @@ static inline u16 dwc2_micro_frame_num(u + */ + static inline u32 dwc2_read_core_intr(struct dwc2_hsotg *hsotg) + { +- return readl(hsotg->regs + GINTSTS) & readl(hsotg->regs + GINTMSK); ++ return dwc2_readl(hsotg->regs + GINTSTS) & dwc2_readl(hsotg->regs + GINTMSK); + } + + static inline u32 dwc2_hcd_urb_get_status(struct dwc2_hcd_urb *dwc2_urb) +@@ -734,7 +734,7 @@ do { \ + qtd_list_entry); \ + if (usb_pipeint(_qtd_->urb->pipe) && \ + (_qh_)->start_split_frame != 0 && !_qtd_->complete_split) { \ +- _hfnum_.d32 = readl((_hcd_)->regs + HFNUM); \ ++ _hfnum_.d32 = dwc2_readl((_hcd_)->regs + HFNUM); \ + switch (_hfnum_.b.frnum & 0x7) { \ + case 7: \ + (_hcd_)->hfnum_7_samples_##_letter_++; \ +--- a/drivers/usb/dwc2/hcd_intr.c ++++ b/drivers/usb/dwc2/hcd_intr.c +@@ -148,7 +148,7 @@ static void dwc2_sof_intr(struct dwc2_hs + dwc2_hcd_queue_transactions(hsotg, tr_type); + + /* Clear interrupt */ +- writel(GINTSTS_SOF, hsotg->regs + GINTSTS); ++ dwc2_writel(GINTSTS_SOF, hsotg->regs + GINTSTS); + } + + /* +@@ -164,7 +164,7 @@ static void dwc2_rx_fifo_level_intr(stru + if (dbg_perio()) + dev_vdbg(hsotg->dev, "--RxFIFO Level Interrupt--\n"); + +- grxsts = readl(hsotg->regs + GRXSTSP); ++ grxsts = dwc2_readl(hsotg->regs + GRXSTSP); + chnum = (grxsts & GRXSTS_HCHNUM_MASK) >> GRXSTS_HCHNUM_SHIFT; + chan = hsotg->hc_ptr_array[chnum]; + if (!chan) { +@@ -247,11 +247,11 @@ static void dwc2_hprt0_enable(struct dwc + dev_vdbg(hsotg->dev, "%s(%p)\n", __func__, hsotg); + + /* Every time when port enables calculate HFIR.FrInterval */ +- hfir = readl(hsotg->regs + HFIR); ++ hfir = dwc2_readl(hsotg->regs + HFIR); + hfir &= ~HFIR_FRINT_MASK; + hfir |= dwc2_calc_frame_interval(hsotg) << HFIR_FRINT_SHIFT & + HFIR_FRINT_MASK; +- writel(hfir, hsotg->regs + HFIR); ++ dwc2_writel(hfir, hsotg->regs + HFIR); + + /* Check if we need to adjust the PHY clock speed for low power */ + if (!params->host_support_fs_ls_low_power) { +@@ -260,7 +260,7 @@ static void dwc2_hprt0_enable(struct dwc + return; + } + +- usbcfg = readl(hsotg->regs + GUSBCFG); ++ usbcfg = dwc2_readl(hsotg->regs + GUSBCFG); + prtspd = (hprt0 & HPRT0_SPD_MASK) >> HPRT0_SPD_SHIFT; + + if (prtspd == HPRT0_SPD_LOW_SPEED || prtspd == HPRT0_SPD_FULL_SPEED) { +@@ -268,11 +268,11 @@ static void dwc2_hprt0_enable(struct dwc + if (!(usbcfg & GUSBCFG_PHY_LP_CLK_SEL)) { + /* Set PHY low power clock select for FS/LS devices */ + usbcfg |= GUSBCFG_PHY_LP_CLK_SEL; +- writel(usbcfg, hsotg->regs + GUSBCFG); ++ dwc2_writel(usbcfg, hsotg->regs + GUSBCFG); + do_reset = 1; + } + +- hcfg = readl(hsotg->regs + HCFG); ++ hcfg = dwc2_readl(hsotg->regs + HCFG); + fslspclksel = (hcfg & HCFG_FSLSPCLKSEL_MASK) >> + HCFG_FSLSPCLKSEL_SHIFT; + +@@ -286,7 +286,7 @@ static void dwc2_hprt0_enable(struct dwc + fslspclksel = HCFG_FSLSPCLKSEL_6_MHZ; + hcfg &= ~HCFG_FSLSPCLKSEL_MASK; + hcfg |= fslspclksel << HCFG_FSLSPCLKSEL_SHIFT; +- writel(hcfg, hsotg->regs + HCFG); ++ dwc2_writel(hcfg, hsotg->regs + HCFG); + do_reset = 1; + } + } else { +@@ -297,7 +297,7 @@ static void dwc2_hprt0_enable(struct dwc + fslspclksel = HCFG_FSLSPCLKSEL_48_MHZ; + hcfg &= ~HCFG_FSLSPCLKSEL_MASK; + hcfg |= fslspclksel << HCFG_FSLSPCLKSEL_SHIFT; +- writel(hcfg, hsotg->regs + HCFG); ++ dwc2_writel(hcfg, hsotg->regs + HCFG); + do_reset = 1; + } + } +@@ -305,7 +305,7 @@ static void dwc2_hprt0_enable(struct dwc + /* Not low power */ + if (usbcfg & GUSBCFG_PHY_LP_CLK_SEL) { + usbcfg &= ~GUSBCFG_PHY_LP_CLK_SEL; +- writel(usbcfg, hsotg->regs + GUSBCFG); ++ dwc2_writel(usbcfg, hsotg->regs + GUSBCFG); + do_reset = 1; + } + } +@@ -332,7 +332,7 @@ static void dwc2_port_intr(struct dwc2_h + + dev_vdbg(hsotg->dev, "--Port Interrupt--\n"); + +- hprt0 = readl(hsotg->regs + HPRT0); ++ hprt0 = dwc2_readl(hsotg->regs + HPRT0); + hprt0_modify = hprt0; + + /* +@@ -385,7 +385,7 @@ static void dwc2_port_intr(struct dwc2_h + } + + /* Clear Port Interrupts */ +- writel(hprt0_modify, hsotg->regs + HPRT0); ++ dwc2_writel(hprt0_modify, hsotg->regs + HPRT0); + } + + /* +@@ -405,7 +405,7 @@ static u32 dwc2_get_actual_xfer_length(s + { + u32 hctsiz, count, length; + +- hctsiz = readl(hsotg->regs + HCTSIZ(chnum)); ++ hctsiz = dwc2_readl(hsotg->regs + HCTSIZ(chnum)); + + if (halt_status == DWC2_HC_XFER_COMPLETE) { + if (chan->ep_is_in) { +@@ -483,7 +483,7 @@ static int dwc2_update_urb_state(struct + urb->status = 0; + } + +- hctsiz = readl(hsotg->regs + HCTSIZ(chnum)); ++ hctsiz = dwc2_readl(hsotg->regs + HCTSIZ(chnum)); + dev_vdbg(hsotg->dev, "DWC_otg: %s: %s, channel %d\n", + __func__, (chan->ep_is_in ? "IN" : "OUT"), chnum); + dev_vdbg(hsotg->dev, " chan->xfer_len %d\n", chan->xfer_len); +@@ -506,7 +506,7 @@ void dwc2_hcd_save_data_toggle(struct dw + struct dwc2_host_chan *chan, int chnum, + struct dwc2_qtd *qtd) + { +- u32 hctsiz = readl(hsotg->regs + HCTSIZ(chnum)); ++ u32 hctsiz = dwc2_readl(hsotg->regs + HCTSIZ(chnum)); + u32 pid = (hctsiz & TSIZ_SC_MC_PID_MASK) >> TSIZ_SC_MC_PID_SHIFT; + + if (chan->ep_type != USB_ENDPOINT_XFER_CONTROL) { +@@ -753,9 +753,9 @@ cleanup: + } + } + +- haintmsk = readl(hsotg->regs + HAINTMSK); ++ haintmsk = dwc2_readl(hsotg->regs + HAINTMSK); + haintmsk &= ~(1 << chan->hc_num); +- writel(haintmsk, hsotg->regs + HAINTMSK); ++ dwc2_writel(haintmsk, hsotg->regs + HAINTMSK); + + /* Try to queue more transfers now that there's a free channel */ + tr_type = dwc2_hcd_select_transactions(hsotg); +@@ -802,9 +802,9 @@ static void dwc2_halt_channel(struct dwc + * is enabled so that the non-periodic schedule will + * be processed + */ +- gintmsk = readl(hsotg->regs + GINTMSK); ++ gintmsk = dwc2_readl(hsotg->regs + GINTMSK); + gintmsk |= GINTSTS_NPTXFEMP; +- writel(gintmsk, hsotg->regs + GINTMSK); ++ dwc2_writel(gintmsk, hsotg->regs + GINTMSK); + } else { + dev_vdbg(hsotg->dev, "isoc/intr\n"); + /* +@@ -821,9 +821,9 @@ static void dwc2_halt_channel(struct dwc + * enabled so that the periodic schedule will be + * processed + */ +- gintmsk = readl(hsotg->regs + GINTMSK); ++ gintmsk = dwc2_readl(hsotg->regs + GINTMSK); + gintmsk |= GINTSTS_PTXFEMP; +- writel(gintmsk, hsotg->regs + GINTMSK); ++ dwc2_writel(gintmsk, hsotg->regs + GINTMSK); + } + } + } +@@ -888,7 +888,7 @@ static void dwc2_complete_periodic_xfer( + struct dwc2_qtd *qtd, + enum dwc2_halt_status halt_status) + { +- u32 hctsiz = readl(hsotg->regs + HCTSIZ(chnum)); ++ u32 hctsiz = dwc2_readl(hsotg->regs + HCTSIZ(chnum)); + + qtd->error_count = 0; + +@@ -1158,7 +1158,7 @@ static void dwc2_update_urb_state_abn(st + + urb->actual_length += xfer_length; + +- hctsiz = readl(hsotg->regs + HCTSIZ(chnum)); ++ hctsiz = dwc2_readl(hsotg->regs + HCTSIZ(chnum)); + dev_vdbg(hsotg->dev, "DWC_otg: %s: %s, channel %d\n", + __func__, (chan->ep_is_in ? "IN" : "OUT"), chnum); + dev_vdbg(hsotg->dev, " chan->start_pkt_count %d\n", +@@ -1469,10 +1469,10 @@ static void dwc2_hc_ahberr_intr(struct d + + dwc2_hc_handle_tt_clear(hsotg, chan, qtd); + +- hcchar = readl(hsotg->regs + HCCHAR(chnum)); +- hcsplt = readl(hsotg->regs + HCSPLT(chnum)); +- hctsiz = readl(hsotg->regs + HCTSIZ(chnum)); +- hc_dma = readl(hsotg->regs + HCDMA(chnum)); ++ hcchar = dwc2_readl(hsotg->regs + HCCHAR(chnum)); ++ hcsplt = dwc2_readl(hsotg->regs + HCSPLT(chnum)); ++ hctsiz = dwc2_readl(hsotg->regs + HCTSIZ(chnum)); ++ hc_dma = dwc2_readl(hsotg->regs + HCDMA(chnum)); + + dev_err(hsotg->dev, "AHB ERROR, Channel %d\n", chnum); + dev_err(hsotg->dev, " hcchar 0x%08x, hcsplt 0x%08x\n", hcchar, hcsplt); +@@ -1685,10 +1685,10 @@ static bool dwc2_halt_status_ok(struct d + * This code is here only as a check. This condition should + * never happen. Ignore the halt if it does occur. + */ +- hcchar = readl(hsotg->regs + HCCHAR(chnum)); +- hctsiz = readl(hsotg->regs + HCTSIZ(chnum)); +- hcintmsk = readl(hsotg->regs + HCINTMSK(chnum)); +- hcsplt = readl(hsotg->regs + HCSPLT(chnum)); ++ hcchar = dwc2_readl(hsotg->regs + HCCHAR(chnum)); ++ hctsiz = dwc2_readl(hsotg->regs + HCTSIZ(chnum)); ++ hcintmsk = dwc2_readl(hsotg->regs + HCINTMSK(chnum)); ++ hcsplt = dwc2_readl(hsotg->regs + HCSPLT(chnum)); + dev_dbg(hsotg->dev, + "%s: chan->halt_status DWC2_HC_XFER_NO_HALT_STATUS,\n", + __func__); +@@ -1712,7 +1712,7 @@ static bool dwc2_halt_status_ok(struct d + * when the halt interrupt occurs. Halt the channel again if it does + * occur. + */ +- hcchar = readl(hsotg->regs + HCCHAR(chnum)); ++ hcchar = dwc2_readl(hsotg->regs + HCCHAR(chnum)); + if (hcchar & HCCHAR_CHDIS) { + dev_warn(hsotg->dev, + "%s: hcchar.chdis set unexpectedly, hcchar 0x%08x, trying to halt again\n", +@@ -1772,7 +1772,7 @@ static void dwc2_hc_chhltd_intr_dma(stru + return; + } + +- hcintmsk = readl(hsotg->regs + HCINTMSK(chnum)); ++ hcintmsk = dwc2_readl(hsotg->regs + HCINTMSK(chnum)); + + if (chan->hcint & HCINTMSK_XFERCOMPL) { + /* +@@ -1867,7 +1867,7 @@ static void dwc2_hc_chhltd_intr_dma(stru + dev_err(hsotg->dev, + "hcint 0x%08x, intsts 0x%08x\n", + chan->hcint, +- readl(hsotg->regs + GINTSTS)); ++ dwc2_readl(hsotg->regs + GINTSTS)); + goto error; + } + } +@@ -1922,11 +1922,11 @@ static void dwc2_hc_n_intr(struct dwc2_h + + chan = hsotg->hc_ptr_array[chnum]; + +- hcint = readl(hsotg->regs + HCINT(chnum)); +- hcintmsk = readl(hsotg->regs + HCINTMSK(chnum)); ++ hcint = dwc2_readl(hsotg->regs + HCINT(chnum)); ++ hcintmsk = dwc2_readl(hsotg->regs + HCINTMSK(chnum)); + if (!chan) { + dev_err(hsotg->dev, "## hc_ptr_array for channel is NULL ##\n"); +- writel(hcint, hsotg->regs + HCINT(chnum)); ++ dwc2_writel(hcint, hsotg->regs + HCINT(chnum)); + return; + } + +@@ -1938,7 +1938,7 @@ static void dwc2_hc_n_intr(struct dwc2_h + hcint, hcintmsk, hcint & hcintmsk); + } + +- writel(hcint, hsotg->regs + HCINT(chnum)); ++ dwc2_writel(hcint, hsotg->regs + HCINT(chnum)); + chan->hcint = hcint; + hcint &= hcintmsk; + +@@ -2030,7 +2030,7 @@ static void dwc2_hc_intr(struct dwc2_hso + u32 haint; + int i; + +- haint = readl(hsotg->regs + HAINT); ++ haint = dwc2_readl(hsotg->regs + HAINT); + if (dbg_perio()) { + dev_vdbg(hsotg->dev, "%s()\n", __func__); + +@@ -2098,8 +2098,8 @@ irqreturn_t dwc2_handle_hcd_intr(struct + "DWC OTG HCD Finished Servicing Interrupts\n"); + dev_vdbg(hsotg->dev, + "DWC OTG HCD gintsts=0x%08x gintmsk=0x%08x\n", +- readl(hsotg->regs + GINTSTS), +- readl(hsotg->regs + GINTMSK)); ++ dwc2_readl(hsotg->regs + GINTSTS), ++ dwc2_readl(hsotg->regs + GINTMSK)); + } + } + +--- a/drivers/usb/dwc2/hcd_queue.c ++++ b/drivers/usb/dwc2/hcd_queue.c +@@ -115,7 +115,7 @@ static void dwc2_qh_init(struct dwc2_hso + if (qh->ep_type == USB_ENDPOINT_XFER_INT) + qh->interval = 8; + #endif +- hprt = readl(hsotg->regs + HPRT0); ++ hprt = dwc2_readl(hsotg->regs + HPRT0); + prtspd = (hprt & HPRT0_SPD_MASK) >> HPRT0_SPD_SHIFT; + if (prtspd == HPRT0_SPD_HIGH_SPEED && + (dev_speed == USB_SPEED_LOW || +@@ -593,9 +593,9 @@ int dwc2_hcd_qh_add(struct dwc2_hsotg *h + if (status) + return status; + if (!hsotg->periodic_qh_count) { +- intr_mask = readl(hsotg->regs + GINTMSK); ++ intr_mask = dwc2_readl(hsotg->regs + GINTMSK); + intr_mask |= GINTSTS_SOF; +- writel(intr_mask, hsotg->regs + GINTMSK); ++ dwc2_writel(intr_mask, hsotg->regs + GINTMSK); + } + hsotg->periodic_qh_count++; + +@@ -630,9 +630,9 @@ void dwc2_hcd_qh_unlink(struct dwc2_hsot + dwc2_deschedule_periodic(hsotg, qh); + hsotg->periodic_qh_count--; + if (!hsotg->periodic_qh_count) { +- intr_mask = readl(hsotg->regs + GINTMSK); ++ intr_mask = dwc2_readl(hsotg->regs + GINTMSK); + intr_mask &= ~GINTSTS_SOF; +- writel(intr_mask, hsotg->regs + GINTMSK); ++ dwc2_writel(intr_mask, hsotg->regs + GINTMSK); + } + } + diff --git a/target/linux/lantiq/patches-4.1/0043-gpio-stp-xway-fix-phy-mask.patch b/target/linux/lantiq/patches-4.1/0043-gpio-stp-xway-fix-phy-mask.patch new file mode 100644 index 0000000000..d43cdf3d54 --- /dev/null +++ b/target/linux/lantiq/patches-4.1/0043-gpio-stp-xway-fix-phy-mask.patch @@ -0,0 +1,23 @@ +From 08b085a07efe12568d86dff064e6f089e2971744 Mon Sep 17 00:00:00 2001 +From: Martin Blumenstingl +Date: Mon, 25 May 2015 22:39:50 +0200 +Subject: gpio-stp-xway: Fix enabling the highest bit of the PHY LEDs + +0x3 only masks two bits, but three bits have to be allowed. This fixes +GPHY0 LED2 (which is the highest bit of phy2) on my board. + +Signed-off-by: Martin Blumenstingl +Acked-by: John Crispin +Signed-off-by: Linus Walleij + +--- a/drivers/gpio/gpio-stp-xway.c ++++ b/drivers/gpio/gpio-stp-xway.c +@@ -58,7 +58,7 @@ + #define XWAY_STP_ADSL_MASK 0x3 + + /* 2 groups of 3 bits can be driven by the phys */ +-#define XWAY_STP_PHY_MASK 0x3 ++#define XWAY_STP_PHY_MASK 0x7 + #define XWAY_STP_PHY1_SHIFT 27 + #define XWAY_STP_PHY2_SHIFT 15 + diff --git a/target/linux/lantiq/patches-4.1/0100-lantiq-xrx200-enable-remove-crc.patch b/target/linux/lantiq/patches-4.1/0100-lantiq-xrx200-enable-remove-crc.patch new file mode 100644 index 0000000000..60a1937568 --- /dev/null +++ b/target/linux/lantiq/patches-4.1/0100-lantiq-xrx200-enable-remove-crc.patch @@ -0,0 +1,25 @@ +--- a/drivers/net/ethernet/lantiq_xrx200.c ++++ b/drivers/net/ethernet/lantiq_xrx200.c +@@ -143,6 +143,7 @@ + #define PMAC_IPG_MASK 0xf + #define PMAC_HD_CTL_AS 0x0008 + #define PMAC_HD_CTL_AC 0x0004 ++#define PMAC_HD_CTL_RC 0x0010 + #define PMAC_HD_CTL_RXSH 0x0040 + #define PMAC_HD_CTL_AST 0x0080 + #define PMAC_HD_CTL_RST 0x0100 +@@ -1502,12 +1503,12 @@ static void xrx200_hw_init(struct xrx200 + #ifdef SW_ROUTING + /* enable status header, enable CRC */ + ltq_pmac_w32_mask(0, +- PMAC_HD_CTL_RST | PMAC_HD_CTL_AST | PMAC_HD_CTL_RXSH | PMAC_HD_CTL_AS | PMAC_HD_CTL_AC, ++ PMAC_HD_CTL_RST | PMAC_HD_CTL_AST | PMAC_HD_CTL_RXSH | PMAC_HD_CTL_AS | PMAC_HD_CTL_AC | PMAC_HD_CTL_RC, + PMAC_HD_CTL); + #else + /* disable status header, enable CRC */ + ltq_pmac_w32_mask(PMAC_HD_CTL_AST | PMAC_HD_CTL_RXSH | PMAC_HD_CTL_AS, +- PMAC_HD_CTL_AC, ++ PMAC_HD_CTL_AC | PMAC_HD_CTL_RC, + PMAC_HD_CTL); + #endif + diff --git a/target/linux/lantiq/patches-4.1/0101-mtd-split.patch b/target/linux/lantiq/patches-4.1/0101-mtd-split.patch new file mode 100644 index 0000000000..acda5aae7d --- /dev/null +++ b/target/linux/lantiq/patches-4.1/0101-mtd-split.patch @@ -0,0 +1,192 @@ +--- a/arch/mips/lantiq/xway/Makefile ++++ b/arch/mips/lantiq/xway/Makefile +@@ -1,6 +1,6 @@ + obj-y := prom.o sysctrl.o clk.o reset.o dma.o timer.o dcdc.o + +-obj-y += vmmc.o tffs.o ++obj-y += vmmc.o tffs.o mtd_split.o + + obj-y += eth_mac.o + obj-$(CONFIG_PCI) += ath_eep.o rt_eep.o pci-ath-fixup.o +--- /dev/null ++++ b/arch/mips/lantiq/xway/mtd_split.c +@@ -0,0 +1,129 @@ ++#include ++#include ++#include ++#include ++ ++#define ROOTFS_SPLIT_NAME "rootfs_data" ++ ++struct squashfs_super_block { ++ __le32 s_magic; ++ __le32 pad0[9]; ++ __le64 bytes_used; ++}; ++ ++static void split_brnimage_kernel(struct mtd_info *master, const char *name, ++ int offset, int size) ++{ ++ unsigned long buf[4]; ++ // Assume at most 2MB of kernel image ++ unsigned long end = offset + (2 << 20); ++ unsigned long part_size = offset + 0x400 - 12; ++ size_t len; ++ int ret; ++ ++ if (strcmp(name, "firmware") != 0) ++ return; ++ while (part_size < end) { ++ long size_min = part_size - 0x400 - 12 - offset; ++ long size_max = part_size + 12 - offset; ++ ret = mtd_read(master, part_size, 16, &len, (void *)buf); ++ if (ret || len != 16) ++ return; ++ ++ if (le32_to_cpu(buf[0]) < size_min || ++ le32_to_cpu(buf[0]) > size_max) { ++ part_size += 0x400; ++ continue; ++ } ++ ++ if (le32_to_cpu(buf[3]) == SQUASHFS_MAGIC) { ++ part_size += 12 - offset; ++ __mtd_add_partition(master, "rootfs", offset + part_size, ++ size - part_size, false); ++ return; ++ } ++ part_size += 0x400; ++ } ++} ++ ++static void split_eva_kernel(struct mtd_info *master, const char *name, ++ int offset, int size) ++{ ++#define EVA_MAGIC 0xfeed1281 ++ unsigned long magic = 0; ++ unsigned long part_size = 0, p; ++ size_t len; ++ int ret; ++ ++ if (strcmp(name, CONFIG_MTD_SPLIT_FIRMWARE_NAME) != 0) ++ return; ++ ++ ret = mtd_read(master, offset, 4, &len, (void *)&magic); ++ if (ret || len != sizeof(magic)) ++ return; ++ ++ if (le32_to_cpu(magic) != EVA_MAGIC) ++ return; ++ ++ ret = mtd_read(master, offset + 4, 4, &len, (void *)&part_size); ++ if (ret || len != sizeof(part_size)) ++ return; ++ ++ p = part_size = le32_to_cpu(part_size) + 0x18; ++ p &= ~0xffff; ++ p += 0x10000; ++ ++ ret = mtd_read(master, offset + p, 4, &len, (void *)&magic); ++ if (ret || len != sizeof(magic)) ++ return; ++ ++ if (magic == SQUASHFS_MAGIC) ++ part_size = p + 0x100; ++ else ++ part_size = mtd_pad_erasesize(master, offset, len); ++ ++ if (part_size + master->erasesize > size) ++ return; ++ ++ __mtd_add_partition(master, "rootfs", offset + part_size, ++ size - part_size, false); ++} ++ ++static void split_tplink_kernel(struct mtd_info *master, const char *name, ++ int offset, int size) ++{ ++#define TPLINK_MAGIC 0x00000002 ++ unsigned long magic = 0; ++ unsigned long part_size = 0; ++ size_t len; ++ int ret; ++ ++ if (strcmp(name, CONFIG_MTD_SPLIT_FIRMWARE_NAME) != 0) ++ return; ++ ++ ret = mtd_read(master, offset, 4, &len, (void *)&magic); ++ if (ret || len != sizeof(magic)) ++ return; ++ ++ if (le32_to_cpu(magic) != TPLINK_MAGIC) ++ return; ++ ++ ret = mtd_read(master, offset + 0x78, 4, &len, (void *)&part_size); ++ if (ret || len != sizeof(part_size)) ++ return; ++ ++ part_size = be32_to_cpu(part_size) + 0x200; ++ if (part_size + master->erasesize > size) ++ return; ++ ++ __mtd_add_partition(master, "rootfs", offset + part_size, ++ size - part_size, false); ++} ++ ++void arch_split_mtd_part(struct mtd_info *master, const char *name, ++ int offset, int size) ++{ ++ split_tplink_kernel(master, name, offset, size); ++ split_eva_kernel(master, name, offset, size); ++ split_brnimage_kernel(master, name, offset, size); ++} +--- a/include/linux/mtd/partitions.h ++++ b/include/linux/mtd/partitions.h +@@ -89,12 +89,17 @@ extern void deregister_mtd_parser(struct + int mtd_is_partition(const struct mtd_info *mtd); + int mtd_add_partition(struct mtd_info *master, const char *name, + long long offset, long long length); ++int __mtd_add_partition(struct mtd_info *master, const char *name, ++ long long offset, long long length, bool dup_check); ++ + int mtd_del_partition(struct mtd_info *master, int partno); + struct mtd_info *mtdpart_get_master(const struct mtd_info *mtd); + uint64_t mtdpart_get_offset(const struct mtd_info *mtd); + uint64_t mtd_get_device_size(const struct mtd_info *mtd); +-extern void __weak arch_split_mtd_part(struct mtd_info *master, +- const char *name, int offset, int size); ++void __weak arch_split_mtd_part(struct mtd_info *master, ++ const char *name, int offset, int size); ++unsigned long ++mtd_pad_erasesize(struct mtd_info *mtd, int offset, int len); + + int parse_mtd_partitions_by_type(struct mtd_info *master, + enum mtd_parser_type type, +--- a/drivers/mtd/mtdpart.c ++++ b/drivers/mtd/mtdpart.c +@@ -658,7 +658,7 @@ static int mtd_add_partition_attrs(struc + } + + +-static int ++int + __mtd_add_partition(struct mtd_info *master, const char *name, + long long offset, long long length, bool dup_check) + { +@@ -762,7 +762,7 @@ run_parsers_by_type(struct mtd_part *sla + return nr_parts; + } + +-static inline unsigned long ++unsigned long + mtd_pad_erasesize(struct mtd_info *mtd, int offset, int len) + { + unsigned long mask = mtd->erasesize - 1; +@@ -832,7 +832,6 @@ static void split_uimage(struct mtd_info + return; + + len = be32_to_cpu(hdr.size) + 0x40; +- len = mtd_pad_erasesize(master, part->offset, len); + if (len + master->erasesize > part->mtd.size) + return; + diff --git a/target/linux/lantiq/patches-4.1/0150-lantiq-pinctrl-xway.patch b/target/linux/lantiq/patches-4.1/0150-lantiq-pinctrl-xway.patch new file mode 100644 index 0000000000..84adbe661f --- /dev/null +++ b/target/linux/lantiq/patches-4.1/0150-lantiq-pinctrl-xway.patch @@ -0,0 +1,15 @@ +--- a/drivers/pinctrl/pinctrl-xway.c ++++ b/drivers/pinctrl/pinctrl-xway.c +@@ -152,10 +152,10 @@ static const struct ltq_mfp_pin xway_mfp + MFP_XWAY(GPIO41, GPIO, NONE, NONE, NONE), + MFP_XWAY(GPIO42, GPIO, MDIO, NONE, NONE), + MFP_XWAY(GPIO43, GPIO, MDIO, NONE, NONE), +- MFP_XWAY(GPIO44, GPIO, NONE, GPHY, SIN), ++ MFP_XWAY(GPIO44, GPIO, MII, SIN, GPHY), + MFP_XWAY(GPIO45, GPIO, NONE, GPHY, SIN), + MFP_XWAY(GPIO46, GPIO, NONE, NONE, EXIN), +- MFP_XWAY(GPIO47, GPIO, NONE, GPHY, SIN), ++ MFP_XWAY(GPIO47, GPIO, MII, GPHY, SIN), + MFP_XWAY(GPIO48, GPIO, EBU, NONE, NONE), + MFP_XWAY(GPIO49, GPIO, EBU, NONE, NONE), + MFP_XWAY(GPIO50, GPIO, NONE, NONE, NONE), diff --git a/target/linux/lantiq/patches-4.1/0151-lantiq-ifxmips_pcie-use-of.patch b/target/linux/lantiq/patches-4.1/0151-lantiq-ifxmips_pcie-use-of.patch new file mode 100644 index 0000000000..26a3a65142 --- /dev/null +++ b/target/linux/lantiq/patches-4.1/0151-lantiq-ifxmips_pcie-use-of.patch @@ -0,0 +1,51 @@ +--- a/arch/mips/pci/ifxmips_pcie.c ++++ b/arch/mips/pci/ifxmips_pcie.c +@@ -18,6 +18,8 @@ + #include + #include + ++#include ++ + #include "ifxmips_pcie.h" + #include "ifxmips_pcie_reg.h" + +@@ -1045,7 +1047,7 @@ pcie_rc_initialize(int pcie_port) + return 0; + } + +-static int __init ifx_pcie_bios_init(void) ++static int __init ifx_pcie_bios_probe(struct platform_device *pdev) + { + void __iomem *io_map_base; + int pcie_port; +@@ -1083,6 +1085,30 @@ static int __init ifx_pcie_bios_init(voi + + return 0; + } ++ ++static const struct of_device_id ifxmips_pcie_match[] = { ++ { .compatible = "lantiq,pcie-xrx200" }, ++ {}, ++}; ++MODULE_DEVICE_TABLE(of, ifxmips_pcie_match); ++ ++static struct platform_driver ltq_pci_driver = { ++ .probe = ifx_pcie_bios_probe, ++ .driver = { ++ .name = "pcie-xrx200", ++ .owner = THIS_MODULE, ++ .of_match_table = ifxmips_pcie_match, ++ }, ++}; ++ ++int __init ifx_pcie_bios_init(void) ++{ ++ int ret = platform_driver_register(<q_pci_driver); ++ if (ret) ++ pr_info("pcie-xrx200: Error registering platform driver!"); ++ return ret; ++} ++ + arch_initcall(ifx_pcie_bios_init); + + MODULE_LICENSE("GPL"); diff --git a/target/linux/lantiq/patches-4.1/0160-owrt-lantiq-multiple-flash.patch b/target/linux/lantiq/patches-4.1/0160-owrt-lantiq-multiple-flash.patch new file mode 100644 index 0000000000..c09323104d --- /dev/null +++ b/target/linux/lantiq/patches-4.1/0160-owrt-lantiq-multiple-flash.patch @@ -0,0 +1,217 @@ +--- a/drivers/mtd/maps/lantiq-flash.c ++++ b/drivers/mtd/maps/lantiq-flash.c +@@ -19,6 +19,7 @@ + #include + #include + #include ++#include + #include + + #include +@@ -38,10 +39,12 @@ enum { + LTQ_NOR_NORMAL + }; + ++#define MAX_RESOURCES 4 ++ + struct ltq_mtd { +- struct resource *res; +- struct mtd_info *mtd; +- struct map_info *map; ++ struct mtd_info *mtd[MAX_RESOURCES]; ++ struct mtd_info *cmtd; ++ struct map_info map[MAX_RESOURCES]; + }; + + static const char ltq_map_name[] = "ltq_nor"; +@@ -109,12 +112,44 @@ ltq_copy_to(struct map_info *map, unsign + } + + static int ++ltq_mtd_remove(struct platform_device *pdev) ++{ ++ struct ltq_mtd *ltq_mtd = platform_get_drvdata(pdev); ++ int i; ++ ++ if (ltq_mtd == NULL) ++ return 0; ++ ++ if (ltq_mtd->cmtd) { ++ mtd_device_unregister(ltq_mtd->cmtd); ++ if (ltq_mtd->cmtd != ltq_mtd->mtd[0]) ++ mtd_concat_destroy(ltq_mtd->cmtd); ++ } ++ ++ for (i = 0; i < MAX_RESOURCES; i++) { ++ if (ltq_mtd->mtd[i] != NULL) ++ map_destroy(ltq_mtd->mtd[i]); ++ } ++ ++ kfree(ltq_mtd); ++ ++ return 0; ++} ++ ++static int + ltq_mtd_probe(struct platform_device *pdev) + { + struct mtd_part_parser_data ppdata; + struct ltq_mtd *ltq_mtd; + struct cfi_private *cfi; +- int err; ++ int err = 0; ++ int i; ++ int devices_found = 0; ++ ++ static const char *rom_probe_types[] = { ++ "cfi_probe", "jedec_probe", NULL ++ }; ++ const char **type; + + if (of_machine_is_compatible("lantiq,falcon") && + (ltq_boot_select() != BS_FLASH)) { +@@ -128,76 +163,88 @@ ltq_mtd_probe(struct platform_device *pd + + platform_set_drvdata(pdev, ltq_mtd); + +- ltq_mtd->res = platform_get_resource(pdev, IORESOURCE_MEM, 0); +- if (!ltq_mtd->res) { +- dev_err(&pdev->dev, "failed to get memory resource\n"); +- return -ENOENT; ++ for (i = 0; i < pdev->num_resources; i++) { ++ printk(KERN_NOTICE "lantiq nor flash device: %.8llx at %.8llx\n", ++ (unsigned long long)resource_size(&pdev->resource[i]), ++ (unsigned long long)pdev->resource[i].start); ++ ++ if (!devm_request_mem_region(&pdev->dev, ++ pdev->resource[i].start, ++ resource_size(&pdev->resource[i]), ++ dev_name(&pdev->dev))) { ++ dev_err(&pdev->dev, "Could not reserve memory region\n"); ++ return -ENOMEM; ++ } ++ ++ ltq_mtd->map[i].name = ltq_map_name; ++ ltq_mtd->map[i].bankwidth = 2; ++ ltq_mtd->map[i].read = ltq_read16; ++ ltq_mtd->map[i].write = ltq_write16; ++ ltq_mtd->map[i].copy_from = ltq_copy_from; ++ ltq_mtd->map[i].copy_to = ltq_copy_to; ++ ++ if (of_find_property(pdev->dev.of_node, "lantiq,noxip", NULL)) ++ ltq_mtd->map[i].phys = NO_XIP; ++ else ++ ltq_mtd->map[i].phys = pdev->resource[i].start; ++ ltq_mtd->map[i].size = resource_size(&pdev->resource[i]); ++ ltq_mtd->map[i].virt = devm_ioremap(&pdev->dev, pdev->resource[i].start, ++ ltq_mtd->map[i].size); ++ if (IS_ERR(ltq_mtd->map[i].virt)) ++ return PTR_ERR(ltq_mtd->map[i].virt); ++ ++ if (ltq_mtd->map[i].virt == NULL) { ++ dev_err(&pdev->dev, "Failed to ioremap flash region\n"); ++ err = PTR_ERR(ltq_mtd->map[i].virt); ++ goto err_out; ++ } ++ ++ ltq_mtd->map[i].map_priv_1 = LTQ_NOR_PROBING; ++ for (type = rom_probe_types; !ltq_mtd->mtd[i] && *type; type++) ++ ltq_mtd->mtd[i] = do_map_probe(*type, <q_mtd->map[i]); ++ ltq_mtd->map[i].map_priv_1 = LTQ_NOR_NORMAL; ++ ++ if (!ltq_mtd->mtd[i]) { ++ dev_err(&pdev->dev, "probing failed\n"); ++ return -ENXIO; ++ } else { ++ devices_found++; ++ } ++ ++ ltq_mtd->mtd[i]->owner = THIS_MODULE; ++ ltq_mtd->mtd[i]->dev.parent = &pdev->dev; ++ ++ cfi = ltq_mtd->map[i].fldrv_priv; ++ cfi->addr_unlock1 ^= 1; ++ cfi->addr_unlock2 ^= 1; + } + +- ltq_mtd->map = devm_kzalloc(&pdev->dev, sizeof(struct map_info), +- GFP_KERNEL); +- if (!ltq_mtd->map) +- return -ENOMEM; +- +- if (of_find_property(pdev->dev.of_node, "lantiq,noxip", NULL)) +- ltq_mtd->map->phys = NO_XIP; +- else +- ltq_mtd->map->phys = ltq_mtd->res->start; +- ltq_mtd->res->start; +- ltq_mtd->map->size = resource_size(ltq_mtd->res); +- ltq_mtd->map->virt = devm_ioremap_resource(&pdev->dev, ltq_mtd->res); +- if (IS_ERR(ltq_mtd->map->virt)) +- return PTR_ERR(ltq_mtd->map->virt); +- +- ltq_mtd->map->name = ltq_map_name; +- ltq_mtd->map->bankwidth = 2; +- ltq_mtd->map->read = ltq_read16; +- ltq_mtd->map->write = ltq_write16; +- ltq_mtd->map->copy_from = ltq_copy_from; +- ltq_mtd->map->copy_to = ltq_copy_to; +- +- ltq_mtd->map->map_priv_1 = LTQ_NOR_PROBING; +- ltq_mtd->mtd = do_map_probe("cfi_probe", ltq_mtd->map); +- ltq_mtd->map->map_priv_1 = LTQ_NOR_NORMAL; +- +- if (!ltq_mtd->mtd) { +- dev_err(&pdev->dev, "probing failed\n"); +- return -ENXIO; +- } +- +- ltq_mtd->mtd->owner = THIS_MODULE; +- +- cfi = ltq_mtd->map->fldrv_priv; +- cfi->addr_unlock1 ^= 1; +- cfi->addr_unlock2 ^= 1; ++ if (devices_found == 1) { ++ ltq_mtd->cmtd = ltq_mtd->mtd[0]; ++ } else if (devices_found > 1) { ++ /* ++ * We detected multiple devices. Concatenate them together. ++ */ ++ ltq_mtd->cmtd = mtd_concat_create(ltq_mtd->mtd, devices_found, dev_name(&pdev->dev)); ++ if (ltq_mtd->cmtd == NULL) ++ err = -ENXIO; ++ } + + ppdata.of_node = pdev->dev.of_node; +- err = mtd_device_parse_register(ltq_mtd->mtd, ltq_probe_types, ++ err = mtd_device_parse_register(ltq_mtd->cmtd, ltq_probe_types, + &ppdata, NULL, 0); + if (err) { + dev_err(&pdev->dev, "failed to add partitions\n"); +- goto err_destroy; ++ goto err_out; + } + + return 0; + +-err_destroy: +- map_destroy(ltq_mtd->mtd); ++err_out: ++ ltq_mtd_remove(pdev); + return err; + } + +-static int +-ltq_mtd_remove(struct platform_device *pdev) +-{ +- struct ltq_mtd *ltq_mtd = platform_get_drvdata(pdev); +- +- if (ltq_mtd && ltq_mtd->mtd) { +- mtd_device_unregister(ltq_mtd->mtd); +- map_destroy(ltq_mtd->mtd); +- } +- return 0; +-} +- + static const struct of_device_id ltq_mtd_match[] = { + { .compatible = "lantiq,nor" }, + {}, diff --git a/target/linux/lantiq/patches-4.1/0300-MTD-cfi-cmdset-0001-disable-buffered-writes.patch b/target/linux/lantiq/patches-4.1/0300-MTD-cfi-cmdset-0001-disable-buffered-writes.patch new file mode 100644 index 0000000000..d153c521d3 --- /dev/null +++ b/target/linux/lantiq/patches-4.1/0300-MTD-cfi-cmdset-0001-disable-buffered-writes.patch @@ -0,0 +1,11 @@ +--- a/drivers/mtd/chips/cfi_cmdset_0001.c ++++ b/drivers/mtd/chips/cfi_cmdset_0001.c +@@ -39,7 +39,7 @@ + /* #define CMDSET0001_DISABLE_WRITE_SUSPEND */ + + // debugging, turns off buffer write mode if set to 1 +-#define FORCE_WORD_WRITE 0 ++#define FORCE_WORD_WRITE 1 + + /* Intel chips */ + #define I82802AB 0x00ad -- 2.30.2