From b0244a00451c1ad64bf0a51f50679f7146786780 Mon Sep 17 00:00:00 2001 From: Bartlomiej Zolnierkiewicz Date: Mon, 20 Aug 2007 22:42:57 +0200 Subject: [PATCH] ide-disk: workaround for buggy HPA support on ST340823A (take 3) MIME-Version: 1.0 Content-Type: text/plain; charset=utf8 Content-Transfer-Encoding: 8bit This disk reports total number of sectors instead of maximum sector address in response to READ_NATIVE_MAX_ADDRESS command and also happily accepts SET_MAX_ADDRESS command with the bogus value. This results in +1 sector capacity being used and errors on attempts to use the last sector. ... hdd: Host Protected Area detected.         current capacity is 78165360 sectors (40020 MB)         native  capacity is 78165361 sectors (40020 MB) hdd: Host Protected Area disabled. ... hdd: reading: block=78165360, sectors=1, buffer=0xc1e63000 hdd: dma_intr: status=0x51 { DriveReady SeekComplete Error } hdd: dma_intr: error=0x10 { SectorIdNotFound }, LBAsect=78165360, sector=78165360 ... Add hpa_list[] table and workaround the issue in idedisk_check_hpa(). v2: * Add missing export and improve patch description a bit. v3: * Add list termination. (From Mikko) Fixes kernel bugzilla bug #8816. Thanks to Mikko for investigating the issue and helping with this patch. Cc: Mikko Rapeli Cc: Alan Cox Signed-off-by: Bartlomiej Zolnierkiewicz --- drivers/ide/ide-disk.c | 18 ++++++++++++++++++ drivers/ide/ide-iops.c | 2 ++ 2 files changed, 20 insertions(+) diff --git a/drivers/ide/ide-disk.c b/drivers/ide/ide-disk.c index 5ce4216f72a2..eba1adbc1b6a 100644 --- a/drivers/ide/ide-disk.c +++ b/drivers/ide/ide-disk.c @@ -481,6 +481,15 @@ static inline int idedisk_supports_lba48(const struct hd_driveid *id) && id->lba_capacity_2; } +/* + * Some disks report total number of sectors instead of + * maximum sector address. We list them here. + */ +static const struct drive_list_entry hpa_list[] = { + { "ST340823A", NULL }, + { NULL, NULL } +}; + static void idedisk_check_hpa(ide_drive_t *drive) { unsigned long long capacity, set_max; @@ -492,6 +501,15 @@ static void idedisk_check_hpa(ide_drive_t *drive) else set_max = idedisk_read_native_max_address(drive); + if (ide_in_drive_list(drive->id, hpa_list)) { + /* + * Since we are inclusive wrt to firmware revisions do this + * extra check and apply the workaround only when needed. + */ + if (set_max == capacity + 1) + set_max--; + } + if (set_max <= capacity) return; diff --git a/drivers/ide/ide-iops.c b/drivers/ide/ide-iops.c index 18cf3a66a1a3..f4cd2700cae5 100644 --- a/drivers/ide/ide-iops.c +++ b/drivers/ide/ide-iops.c @@ -584,6 +584,8 @@ int ide_in_drive_list(struct hd_driveid *id, const struct drive_list_entry *driv return 0; } +EXPORT_SYMBOL_GPL(ide_in_drive_list); + /* * Early UDMA66 devices don't set bit14 to 1, only bit13 is valid. * We list them here and depend on the device side cable detection for them. -- 2.30.2