From af8a059bb41dd7afee49ce9a5d52e9a8e010bbd8 Mon Sep 17 00:00:00 2001 From: Victorien Molle Date: Fri, 20 Aug 2021 21:41:19 +0200 Subject: [PATCH] ath79: add support for GL.iNet GL-XE300 The GL.iNet GL-XE300 is a 4G LTE Wireless router, based on QCA9531 SoC. Specifications: - SoC: QCA9531 (650MHz) - RAM: DDR2 128M - Flash: SPI NOR 16M + SPI NAND 128M - WiFi: 2.4GHz with 2 antennas - Ethernet: - 1x LAN (10/100M) - 1x WAN (10/100M) - LTE: - USB: 1x USB 2.0 port - UART: - 3.3V, TX, RX, GND / 115200 8N1 MAC addresses as verified by OEM firmware: use address source LAN *:c5 art 0x0 (label) WAN *:c6 label + 1 WLAN *:c7 art 0x1002 Installation via U-Boot rescue: 1. Press and hold reset and power buttons simultaneously 2. Wait for the LAN led to blink 5 times 3. Release reset and power buttons 4. The rescue page is accessible via http://192.168.1.1 5. Select the OpenWrt factory image and start upgrade 6. Wait for the router to flash new firmware and reboot Revert to stock firmware: i. Download the stock firmware from GL.Inet website ii. Use the same method explained above to flash the stock firmware Signed-off-by: Victorien Molle [update commit message] Signed-off-by: David Bauer --- .../ath79/dts/qca9531_glinet_gl-xe300.dts | 168 ++++++++++++++++++ target/linux/ath79/image/nand.mk | 16 ++ 2 files changed, 184 insertions(+) create mode 100644 target/linux/ath79/dts/qca9531_glinet_gl-xe300.dts diff --git a/target/linux/ath79/dts/qca9531_glinet_gl-xe300.dts b/target/linux/ath79/dts/qca9531_glinet_gl-xe300.dts new file mode 100644 index 0000000000..59344917ad --- /dev/null +++ b/target/linux/ath79/dts/qca9531_glinet_gl-xe300.dts @@ -0,0 +1,168 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT + +#include "qca953x.dtsi" + +#include +#include + +/ { + compatible = "glinet,gl-xe300", "qca,qca9531"; + model = "GL.iNet GL-XE300"; + + gpio-export { + compatible = "gpio-export"; + + gpio_lte_power { + gpios = <&gpio 0 GPIO_ACTIVE_HIGH>; + gpio-export,name = "lte_power"; + gpio-export,output = <1>; + }; + + gpio_sd_detect { + gpios = <&gpio 17 GPIO_ACTIVE_LOW>; + gpio-export,name = "sd_detect"; + gpio-export,output = <0>; + }; + }; + + keys { + compatible = "gpio-keys"; + + pinctrl-names = "default"; + pinctrl-0 = <&jtag_disable_pins>; + + reset { + label = "reset"; + linux,code = ; + gpios = <&gpio 3 GPIO_ACTIVE_LOW>; + }; + }; + + leds { + compatible = "gpio-leds"; + + lan { + gpios = <&gpio 10 GPIO_ACTIVE_LOW>; + label = "green:lan"; + }; + + wan { + gpios = <&gpio 1 GPIO_ACTIVE_LOW>; + label = "green:wan"; + }; + + wlan { + gpios = <&gpio 12 GPIO_ACTIVE_LOW>; + label = "green:wlan"; + linux,default-trigger = "phy0tpt"; + }; + + lte { + gpios = <&gpio 13 GPIO_ACTIVE_LOW>; + label = "green:lte"; + }; + }; +}; + +&pcie0 { + status = "okay"; +}; + +&usb0 { + status = "okay"; +}; + +&usb_phy { + status = "okay"; +}; + +&spi { + status = "okay"; + + flash@0 { + compatible = "jedec,spi-nor"; + reg = <0>; + spi-max-frequency = <25000000>; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + label = "u-boot"; + reg = <0x0 0x40000>; + read-only; + }; + + partition@40000 { + label = "u-boot-env"; + reg = <0x40000 0x10000>; + }; + + art: partition@50000 { + label = "art"; + reg = <0x50000 0x10000>; + read-only; + }; + + partition@60000 { + label = "kernel"; + reg = <0x60000 0x400000>; + }; + + partition@460000 { + label = "nor_reserved"; + reg = <0x460000 0xba0000>; + }; + }; + }; + + flash@1 { + compatible = "spi-nand"; + reg = <1>; + spi-max-frequency = <25000000>; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + label = "ubi"; + reg = <0x0 0x8000000>; + }; + }; + }; +}; + +ð0 { + status = "okay"; + + phy-handle = <&swphy4>; + + nvmem-cells = <&macaddr_art_0>; + nvmem-cell-names = "mac-address"; + mtd-mac-address-increment = <1>; +}; + +ð1 { + nvmem-cells = <&macaddr_art_0>; + nvmem-cell-names = "mac-address"; +}; + +&wmac { + status = "okay"; + + mtd-cal-data = <&art 0x1000>; +}; + +&art { + compatible = "nvmem-cells"; + #address-cells = <1>; + #size-cells = <1>; + + macaddr_art_0: macaddr@0 { + reg = <0x0 0x6>; + }; +}; diff --git a/target/linux/ath79/image/nand.mk b/target/linux/ath79/image/nand.mk index d31aba1abc..b8006c6d0c 100644 --- a/target/linux/ath79/image/nand.mk +++ b/target/linux/ath79/image/nand.mk @@ -195,6 +195,22 @@ define Device/glinet_gl-e750 endef TARGET_DEVICES += glinet_gl-e750 +define Device/glinet_gl-xe300 + SOC := qca9531 + DEVICE_VENDOR := GL.iNet + DEVICE_MODEL := GL-XE300 + DEVICE_PACKAGES := kmod-usb2 block-mount kmod-usb-serial-ch341 + KERNEL_SIZE := 4096k + IMAGE_SIZE := 131072k + PAGESIZE := 2048 + VID_HDR_OFFSET := 2048 + BLOCKSIZE := 128k + IMAGES += factory.img + IMAGE/factory.img := append-kernel | pad-to $$$$(KERNEL_SIZE) | append-ubi + IMAGE/sysupgrade.bin := sysupgrade-tar | append-metadata +endef +TARGET_DEVICES += glinet_gl-xe300 + # fake rootfs is mandatory, pad-offset 129 equals (2 * uimage_header + 0xff) define Device/netgear_ath79_nand DEVICE_VENDOR := NETGEAR -- 2.30.2