From af56075a8ff760832df27546325428f2497a0121 Mon Sep 17 00:00:00 2001 From: Roberto Valentini Date: Thu, 1 Jul 2021 11:56:30 +0200 Subject: [PATCH] ath79: add support for TP-Link RE455 v1 TP-Link RE455 v1 is a dual band router/range-extender based on Qualcomm/Atheros QCA9563 + QCA9880. This device is nearly identical to RE450 v3 Specification: - 775 MHz CPU - 64 MB of RAM (DDR2) - 8 MB of FLASH (SPI NOR) - 3T3R 2.4 GHz - 3T3R 5 GHz - 1x 10/100/1000 Mbps Ethernet (AR8033 PHY) - 7x LED, 4x button - UART header on PCB[1] Flash instruction: Apply factory image in OEM firmware web-gui. [1] Didn't work, probably need to short unpopulated resistor R64 and R69 as RE450v3 Signed-off-by: Roberto Valentini --- .../ath79/dts/qca9563_tplink_re455-v1.dts | 52 +++++++++++++++++++ .../generic/base-files/etc/board.d/01_leds | 3 +- .../generic/base-files/etc/board.d/02_network | 1 + .../etc/hotplug.d/firmware/11-ath10k-caldata | 3 +- target/linux/ath79/image/generic-tp-link.mk | 12 +++++ tools/firmware-utils/src/tplink-safeloader.c | 40 ++++++++++++++ 6 files changed, 109 insertions(+), 2 deletions(-) create mode 100644 target/linux/ath79/dts/qca9563_tplink_re455-v1.dts diff --git a/target/linux/ath79/dts/qca9563_tplink_re455-v1.dts b/target/linux/ath79/dts/qca9563_tplink_re455-v1.dts new file mode 100644 index 0000000000..b6c1efb846 --- /dev/null +++ b/target/linux/ath79/dts/qca9563_tplink_re455-v1.dts @@ -0,0 +1,52 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT + +#include "qca9563_tplink_re450.dtsi" + +/ { + compatible = "tplink,re455-v1", "qca,qca9563"; + model = "TP-Link RE455 v1"; +}; + +&partitions { + partition@0 { + label = "u-boot"; + reg = <0x000000 0x020000>; + read-only; + }; + + info: partition@20000 { + label = "info"; + reg = <0x020000 0x002000>; + read-only; + }; + + partition@22000 { + label = "partition-table"; + reg = <0x022000 0x002000>; + read-only; + }; + + partition@24000 { + label = "info2"; + reg = <0x024000 0x00a000>; + read-only; + }; + + partition@2e000 { + label = "config"; + reg = <0x02e000 0x022000>; + read-only; + }; + + partition@50000 { + compatible = "tplink,firmware"; + label = "firmware"; + reg = <0x050000 0x7a0000>; + }; + + art: partition@7f0000 { + label = "art"; + reg = <0x7f0000 0x010000>; + read-only; + }; +}; diff --git a/target/linux/ath79/generic/base-files/etc/board.d/01_leds b/target/linux/ath79/generic/base-files/etc/board.d/01_leds index 890b38e58a..5e5ccca32f 100644 --- a/target/linux/ath79/generic/base-files/etc/board.d/01_leds +++ b/target/linux/ath79/generic/base-files/etc/board.d/01_leds @@ -352,7 +352,8 @@ tplink,tl-wr902ac-v1) tplink,re355-v1|\ tplink,re450-v1|\ tplink,re450-v2|\ -tplink,re450-v3) +tplink,re450-v3|\ +tplink,re455-v1) ucidef_set_led_netdev "lan_data" "LAN Data" "green:lan_data" "eth0" "tx rx" ucidef_set_led_netdev "lan_link" "LAN Link" "green:lan_link" "eth0" "link" ;; diff --git a/target/linux/ath79/generic/base-files/etc/board.d/02_network b/target/linux/ath79/generic/base-files/etc/board.d/02_network index 025d55fec0..1731f141af 100644 --- a/target/linux/ath79/generic/base-files/etc/board.d/02_network +++ b/target/linux/ath79/generic/base-files/etc/board.d/02_network @@ -70,6 +70,7 @@ ath79_setup_interfaces() tplink,re450-v1|\ tplink,re450-v2|\ tplink,re450-v3|\ + tplink,re455-v1|\ tplink,tl-wr902ac-v1|\ ubnt,bullet-ac|\ ubnt,bullet-m-ar7240|\ diff --git a/target/linux/ath79/generic/base-files/etc/hotplug.d/firmware/11-ath10k-caldata b/target/linux/ath79/generic/base-files/etc/hotplug.d/firmware/11-ath10k-caldata index 8d7407450d..59d692c3d0 100644 --- a/target/linux/ath79/generic/base-files/etc/hotplug.d/firmware/11-ath10k-caldata +++ b/target/linux/ath79/generic/base-files/etc/hotplug.d/firmware/11-ath10k-caldata @@ -141,7 +141,8 @@ case "$FIRMWARE" in ;; tplink,eap245-v1|\ tplink,re450-v2|\ - tplink,re450-v3) + tplink,re450-v3|\ + tplink,re455-v1) caldata_extract "art" 0x5000 0x844 ath10k_patch_mac $(macaddr_add $(mtd_get_mac_binary info 0x8) 1) ;; diff --git a/target/linux/ath79/image/generic-tp-link.mk b/target/linux/ath79/image/generic-tp-link.mk index 9c4920b4e6..16494b111f 100644 --- a/target/linux/ath79/image/generic-tp-link.mk +++ b/target/linux/ath79/image/generic-tp-link.mk @@ -486,6 +486,18 @@ define Device/tplink_re450-v3 endef TARGET_DEVICES += tplink_re450-v3 +define Device/tplink_re455-v1 + $(Device/tplink-safeloader) + SOC := qca9563 + IMAGE_SIZE := 7808k + DEVICE_MODEL := RE455 + DEVICE_VARIANT := v1 + DEVICE_PACKAGES := kmod-ath10k-ct-smallbuffers ath10k-firmware-qca988x-ct + TPLINK_BOARD_ID := RE455-V1 + LOADER_TYPE := elf +endef +TARGET_DEVICES += tplink_re455-v1 + define Device/tplink_tl-mr6400-v1 $(Device/tplink-8mlzma) SOC := qca9531 diff --git a/tools/firmware-utils/src/tplink-safeloader.c b/tools/firmware-utils/src/tplink-safeloader.c index 432044882c..4e7549d5e6 100644 --- a/tools/firmware-utils/src/tplink-safeloader.c +++ b/tools/firmware-utils/src/tplink-safeloader.c @@ -2431,6 +2431,46 @@ static struct device_info boards[] = { .last_sysupgrade_partition = "file-system" }, + /** Firmware layout for the RE455 v1 */ + { + .id = "RE455-V1", + .vendor = "", + .support_list = + "SupportList:\r\n" + "{product_name:RE455,product_ver:1.0.0,special_id:00000000}\r\n" + "{product_name:RE455,product_ver:1.0.0,special_id:55530000}\r\n" + "{product_name:RE455,product_ver:1.0.0,special_id:45550000}\r\n" + "{product_name:RE455,product_ver:1.0.0,special_id:4A500000}\r\n" + "{product_name:RE455,product_ver:1.0.0,special_id:43410000}\r\n" + "{product_name:RE455,product_ver:1.0.0,special_id:41550000}\r\n" + "{product_name:RE455,product_ver:1.0.0,special_id:41530000}\r\n" + "{product_name:RE455,product_ver:1.0.0,special_id:4B520000}\r\n" + "{product_name:RE455,product_ver:1.0.0,special_id:42520000}\r\n", + .part_trail = 0x00, + .soft_ver = NULL, + + /* We're using a dynamic kernel/rootfs split here */ + .partitions = { + {"fs-uboot", 0x00000, 0x20000}, + {"default-mac", 0x20000, 0x00020}, + {"pin", 0x20020, 0x00020}, + {"product-info", 0x21000, 0x01000}, + {"partition-table", 0x22000, 0x02000}, + {"soft-version", 0x24000, 0x01000}, + {"support-list", 0x25000, 0x01000}, + {"profile", 0x26000, 0x08000}, + {"user-config", 0x2e000, 0x10000}, + {"default-config", 0x3e000, 0x10000}, + {"config-info", 0x4e000, 0x00400}, + {"firmware", 0x50000, 0x7a0000}, + {"radio", 0x7f0000, 0x10000}, + {NULL, 0, 0} + }, + + .first_sysupgrade_partition = "os-image", + .last_sysupgrade_partition = "file-system" + }, + /** Firmware layout for the RE500 */ { .id = "RE500-V1", -- 2.30.2