From af5484acb0e8e4b6d0d977f84d8dde7b537c441d Mon Sep 17 00:00:00 2001 From: Priyanka Jain Date: Tue, 30 Jan 2018 11:38:38 +0530 Subject: [PATCH] net/phy/cortina.c: Update get_phy_id implementation Update get_phy_id() implementation in cortina.c to check for Cortina_phy by comparing device phy_id with cortina phy_id instead of relying on presence of CORTINA macros. This will allow get_phy_id to work with non-cortina phy devices which might have same phy address as Cortina device but on different bus. Signed-off-by: Priyanka Jain Acked-by: Joe Hershberger --- drivers/net/phy/cortina.c | 46 +++++++++++++++------------------------ 1 file changed, 17 insertions(+), 29 deletions(-) diff --git a/drivers/net/phy/cortina.c b/drivers/net/phy/cortina.c index 637d89a1e1..3ac833d71a 100644 --- a/drivers/net/phy/cortina.c +++ b/drivers/net/phy/cortina.c @@ -295,45 +295,33 @@ int phy_cortina_init(void) int get_phy_id(struct mii_dev *bus, int addr, int devad, u32 *phy_id) { int phy_reg; - bool is_cortina_phy = false; - - switch (addr) { -#ifdef CORTINA_PHY_ADDR1 - case CORTINA_PHY_ADDR1: -#endif -#ifdef CORTINA_PHY_ADDR2 - case CORTINA_PHY_ADDR2: -#endif -#ifdef CORTINA_PHY_ADDR3 - case CORTINA_PHY_ADDR3: -#endif -#ifdef CORTINA_PHY_ADDR4 - case CORTINA_PHY_ADDR4: -#endif - is_cortina_phy = true; - break; - default: - break; - } /* Cortina PHY has non-standard offset of PHY ID registers */ - if (is_cortina_phy) - phy_reg = bus->read(bus, addr, 0, VILLA_GLOBAL_CHIP_ID_LSB); - else - phy_reg = bus->read(bus, addr, devad, MII_PHYSID1); + phy_reg = bus->read(bus, addr, 0, VILLA_GLOBAL_CHIP_ID_LSB); + if (phy_reg < 0) + return -EIO; + *phy_id = (phy_reg & 0xffff) << 16; + phy_reg = bus->read(bus, addr, 0, VILLA_GLOBAL_CHIP_ID_MSB); if (phy_reg < 0) return -EIO; + *phy_id |= (phy_reg & 0xffff); - *phy_id = (phy_reg & 0xffff) << 16; - if (is_cortina_phy) - phy_reg = bus->read(bus, addr, 0, VILLA_GLOBAL_CHIP_ID_MSB); - else - phy_reg = bus->read(bus, addr, devad, MII_PHYSID2); + if (*phy_id == PHY_UID_CS4340) + return 0; + /* + * If Cortina PHY not detected, + * try generic way to find PHY ID registers + */ + phy_reg = bus->read(bus, addr, devad, MII_PHYSID1); if (phy_reg < 0) return -EIO; + *phy_id = (phy_reg & 0xffff) << 16; + phy_reg = bus->read(bus, addr, devad, MII_PHYSID2); + if (phy_reg < 0) + return -EIO; *phy_id |= (phy_reg & 0xffff); return 0; -- 2.30.2