From ae67f5ffae69119eef6509a48b111164a5842346 Mon Sep 17 00:00:00 2001 From: Pawel Dembicki Date: Tue, 4 Feb 2020 17:26:47 +0100 Subject: [PATCH] kirkwood: use generic diag.sh This commit removes the target-specific diag.sh script. This way, the generic one is used for the target, which uses DT-aliases to specify the LEDs used. Generic diag.sh allow to use different LEDs to indicate different states. Non-red status LEDs for indicating boot and a running system. Where possible, the red or orange LEDs are used to indicate failsafe mode and a running upgrade. Compile-tested: all target devices. Run-tested: CheckPoint L-50 Signed-off-by: Pawel Dembicki [remove unrelated cosmetic changes, rename some labels, add pogo_e02] Signed-off-by: Adrian Schmutzler --- target/linux/kirkwood/base-files/etc/diag.sh | 55 ------------------- .../kirkwood/patches-4.14/100-ib62x0.patch | 26 ++++++++- .../kirkwood/patches-4.14/101-iconnect.patch | 33 ++++++++++- .../kirkwood/patches-4.14/102-dockstar.patch | 31 ++++++++++- .../patches-4.14/103-iomega-ix2-200.patch | 37 ++++++++++++- .../kirkwood/patches-4.14/104-ea3500.patch | 8 ++- .../kirkwood/patches-4.14/105-ea4500.patch | 28 ++++++++-- .../patches-4.14/105-goflexhome.patch | 14 +++-- .../kirkwood/patches-4.14/106-goflexnet.patch | 31 ++++++++++- .../patches-4.14/107-02-nsa310b.patch | 13 ++++- .../kirkwood/patches-4.14/108-on100.patch | 14 +++-- .../patches-4.14/109-pogoplug_v4.patch | 34 +++++++++++- .../kirkwood/patches-4.14/110-pogo_e02.patch | 31 +++++++++++ .../kirkwood/patches-4.19/100-ib62x0.patch | 26 ++++++++- .../kirkwood/patches-4.19/101-iconnect.patch | 33 ++++++++++- .../kirkwood/patches-4.19/102-dockstar.patch | 31 ++++++++++- .../patches-4.19/103-iomega-ix2-200.patch | 37 ++++++++++++- .../kirkwood/patches-4.19/104-ea3500.patch | 8 ++- .../kirkwood/patches-4.19/105-ea4500.patch | 28 ++++++++-- .../patches-4.19/105-goflexhome.patch | 14 +++-- .../kirkwood/patches-4.19/106-goflexnet.patch | 31 ++++++++++- .../patches-4.19/107-02-nsa310b.patch | 13 ++++- .../kirkwood/patches-4.19/108-on100.patch | 14 +++-- .../patches-4.19/109-pogoplug_v4.patch | 34 +++++++++++- .../kirkwood/patches-4.19/110-pogo_e02.patch | 31 +++++++++++ 25 files changed, 542 insertions(+), 113 deletions(-) delete mode 100755 target/linux/kirkwood/base-files/etc/diag.sh create mode 100644 target/linux/kirkwood/patches-4.14/110-pogo_e02.patch create mode 100644 target/linux/kirkwood/patches-4.19/110-pogo_e02.patch diff --git a/target/linux/kirkwood/base-files/etc/diag.sh b/target/linux/kirkwood/base-files/etc/diag.sh deleted file mode 100755 index fc61846c11..0000000000 --- a/target/linux/kirkwood/base-files/etc/diag.sh +++ /dev/null @@ -1,55 +0,0 @@ -#!/bin/sh -# Copyright (C) 2014 OpenWrt.org - -. /lib/functions.sh -. /lib/functions/leds.sh - -get_status_led() { - case $(board_name) in - cisco,on100) - status_led="on100:green:health" - ;; - cloudengines,pogoe02) - status_led="pogo_e02:orange:fault" - ;; - cloudengines,pogoplugv4) - status_led="pogoplugv4:green:health" - ;; - iom,ix2-200) - status_led="status:white:power_led" - ;; - linksys,audi) - status_led="audi:green:power" - ;; - linksys,viper) - status_led="viper:white:health" - ;; - seagate,dockstar|\ - seagate,goflexhome|\ - seagate,goflexnet) - status_led="status:orange:fault" - ;; - zyxel,nsa310b) - status_led="nsa310:green:sys" - ;; - esac -} - -set_state() { - get_status_led - - case "$1" in - preinit) - status_led_blink_preinit - ;; - failsafe) - status_led_blink_failsafe - ;; - preinit_regular) - status_led_blink_preinit_regular - ;; - done) - status_led_on - ;; - esac -} diff --git a/target/linux/kirkwood/patches-4.14/100-ib62x0.patch b/target/linux/kirkwood/patches-4.14/100-ib62x0.patch index d1a5aa7d3e..494540d730 100644 --- a/target/linux/kirkwood/patches-4.14/100-ib62x0.patch +++ b/target/linux/kirkwood/patches-4.14/100-ib62x0.patch @@ -1,15 +1,37 @@ --- a/arch/arm/boot/dts/kirkwood-ib62x0.dts +++ b/arch/arm/boot/dts/kirkwood-ib62x0.dts -@@ -6,7 +6,7 @@ +@@ -6,7 +6,14 @@ / { model = "RaidSonic ICY BOX IB-NAS62x0 (Rev B)"; - compatible = "raidsonic,ib-nas6210-b", "raidsonic,ib-nas6220-b", "raidsonic,ib-nas6210", "raidsonic,ib-nas6220", "raidsonic,ib-nas62x0", "marvell,kirkwood-88f6281", "marvell,kirkwood"; + compatible = "raidsonic,ib-nas62x0", "marvell,kirkwood-88f6281", "marvell,kirkwood"; ++ ++ aliases { ++ led-boot = &led_green_os; ++ led-failsafe = &led_red_os; ++ led-running = &led_green_os; ++ led-upgrade = &led_red_os; ++ }; memory { device_type = "memory"; -@@ -118,13 +118,13 @@ +@@ -81,12 +88,11 @@ + &pmx_led_usb_transfer>; + pinctrl-names = "default"; + +- green-os { ++ led_green_os: green-os { + label = "ib62x0:green:os"; + gpios = <&gpio0 25 GPIO_ACTIVE_HIGH>; +- default-state = "keep"; + }; +- red-os { ++ led_red_os: red-os { + label = "ib62x0:red:os"; + gpios = <&gpio0 22 GPIO_ACTIVE_HIGH>; + }; +@@ -118,13 +124,13 @@ }; partition@100000 { diff --git a/target/linux/kirkwood/patches-4.14/101-iconnect.patch b/target/linux/kirkwood/patches-4.14/101-iconnect.patch index ab47b5a724..f36f50eae4 100644 --- a/target/linux/kirkwood/patches-4.14/101-iconnect.patch +++ b/target/linux/kirkwood/patches-4.14/101-iconnect.patch @@ -1,6 +1,20 @@ --- a/arch/arm/boot/dts/kirkwood-iconnect.dts +++ b/arch/arm/boot/dts/kirkwood-iconnect.dts -@@ -16,8 +16,6 @@ +@@ -8,6 +8,13 @@ + model = "Iomega Iconnect"; + compatible = "iom,iconnect-1.1", "iom,iconnect", "marvell,kirkwood-88f6281", "marvell,kirkwood"; + ++ aliases { ++ led-boot = &led_power_blue; ++ led-failsafe = &led_power_red; ++ led-running = &led_power_blue; ++ led-upgrade = &led_power_red; ++ }; ++ + memory { + device_type = "memory"; + reg = <0x00000000 0x10000000>; +@@ -16,8 +23,6 @@ chosen { bootargs = "console=ttyS0,115200n8 earlyprintk"; stdout-path = &uart0; @@ -9,7 +23,22 @@ }; ocp@f1000000 { -@@ -146,28 +144,23 @@ +@@ -89,12 +94,11 @@ + gpios = <&gpio1 9 GPIO_ACTIVE_HIGH>; + default-state = "on"; + }; +- power-blue { ++ led_power_blue: power-blue { + label = "power:blue"; + gpios = <&gpio1 10 GPIO_ACTIVE_HIGH>; +- default-state = "keep"; + }; +- power-red { ++ led_power_red: power-red { + label = "power:red"; + gpios = <&gpio1 11 GPIO_ACTIVE_HIGH>; + }; +@@ -146,28 +150,23 @@ status = "okay"; partition@0 { diff --git a/target/linux/kirkwood/patches-4.14/102-dockstar.patch b/target/linux/kirkwood/patches-4.14/102-dockstar.patch index 7462b93e0c..fb05e469bc 100644 --- a/target/linux/kirkwood/patches-4.14/102-dockstar.patch +++ b/target/linux/kirkwood/patches-4.14/102-dockstar.patch @@ -1,6 +1,35 @@ --- a/arch/arm/boot/dts/kirkwood-dockstar.dts +++ b/arch/arm/boot/dts/kirkwood-dockstar.dts -@@ -78,18 +78,22 @@ +@@ -8,6 +8,13 @@ + model = "Seagate FreeAgent Dockstar"; + compatible = "seagate,dockstar", "marvell,kirkwood-88f6281", "marvell,kirkwood"; + ++ aliases { ++ led-boot = &led_health; ++ led-failsafe = &led_fault; ++ led-running = &led_health; ++ led-upgrade = &led_fault; ++ }; ++ + memory { + device_type = "memory"; + reg = <0x00000000 0x8000000>; +@@ -42,12 +49,11 @@ + pinctrl-0 = <&pmx_led_green &pmx_led_orange>; + pinctrl-names = "default"; + +- health { ++ led_health: health { + label = "status:green:health"; + gpios = <&gpio1 14 GPIO_ACTIVE_LOW>; +- default-state = "keep"; + }; +- fault { ++ led_fault: fault { + label = "status:orange:fault"; + gpios = <&gpio1 15 GPIO_ACTIVE_LOW>; + }; +@@ -78,18 +84,22 @@ partition@0 { label = "u-boot"; diff --git a/target/linux/kirkwood/patches-4.14/103-iomega-ix2-200.patch b/target/linux/kirkwood/patches-4.14/103-iomega-ix2-200.patch index 9036ead951..73655e1293 100644 --- a/target/linux/kirkwood/patches-4.14/103-iomega-ix2-200.patch +++ b/target/linux/kirkwood/patches-4.14/103-iomega-ix2-200.patch @@ -1,6 +1,39 @@ --- a/arch/arm/boot/dts/kirkwood-iomega_ix2_200.dts +++ b/arch/arm/boot/dts/kirkwood-iomega_ix2_200.dts -@@ -186,18 +186,18 @@ +@@ -8,6 +8,13 @@ + model = "Iomega StorCenter ix2-200"; + compatible = "iom,ix2-200", "marvell,kirkwood-88f6281", "marvell,kirkwood"; + ++ aliases { ++ led-boot = &led_power; ++ led-failsafe = &led_health; ++ led-running = &led_power; ++ led-upgrade = &led_health; ++ }; ++ + memory { + device_type = "memory"; + reg = <0x00000000 0x10000000>; +@@ -127,16 +134,15 @@ + &pmx_led_rebuild &pmx_led_health >; + pinctrl-names = "default"; + +- power_led { ++ led_power: power_led { + label = "status:white:power_led"; + gpios = <&gpio0 16 GPIO_ACTIVE_HIGH>; +- default-state = "keep"; + }; + rebuild_led { + label = "status:white:rebuild_led"; + gpios = <&gpio1 4 GPIO_ACTIVE_HIGH>; + }; +- health_led { ++ led_health: health_led { + label = "status:red:health_led"; + gpios = <&gpio1 5 GPIO_ACTIVE_HIGH>; + }; +@@ -186,18 +192,18 @@ }; partition@a0000 { @@ -22,7 +55,7 @@ reg = <0x400000 0x1C00000>; }; }; -@@ -211,7 +211,7 @@ +@@ -211,7 +217,7 @@ }; ð0 { diff --git a/target/linux/kirkwood/patches-4.14/104-ea3500.patch b/target/linux/kirkwood/patches-4.14/104-ea3500.patch index 73bb252a79..2aef79035e 100644 --- a/target/linux/kirkwood/patches-4.14/104-ea3500.patch +++ b/target/linux/kirkwood/patches-4.14/104-ea3500.patch @@ -10,7 +10,7 @@ kirkwood-lsxhl.dtb \ --- /dev/null +++ b/arch/arm/boot/dts/kirkwood-linksys-audi.dts -@@ -0,0 +1,245 @@ +@@ -0,0 +1,249 @@ +/* + * kirkwood-linksys-audi.dts - Device Tree file for Linksys EA3500 + * @@ -39,6 +39,10 @@ + }; + + aliases { ++ led-boot = &led_power; ++ led-failsafe = &led_power; ++ led-running = &led_power; ++ led-upgrade = &led_power; + serial0 = &uart0; + }; + @@ -71,7 +75,7 @@ + pinctrl-0 = < &pmx_led_green_power >; + pinctrl-names = "default"; + -+ green-power { ++ led_power: power { + label = "audi:green:power"; + gpios = <&gpio0 7 GPIO_ACTIVE_HIGH>; + }; diff --git a/target/linux/kirkwood/patches-4.14/105-ea4500.patch b/target/linux/kirkwood/patches-4.14/105-ea4500.patch index 6cc3de221b..0c2b30df0d 100644 --- a/target/linux/kirkwood/patches-4.14/105-ea4500.patch +++ b/target/linux/kirkwood/patches-4.14/105-ea4500.patch @@ -1,6 +1,26 @@ --- a/arch/arm/boot/dts/kirkwood-linksys-viper.dts +++ b/arch/arm/boot/dts/kirkwood-linksys-viper.dts -@@ -69,9 +69,18 @@ +@@ -26,6 +26,10 @@ + }; + + aliases { ++ led-boot = &led_white_health; ++ led-failsafe = &led_white_health; ++ led-running = &led_white_health; ++ led-upgrade = &led_white_health; + serial0 = &uart0; + }; + +@@ -58,7 +62,7 @@ + pinctrl-0 = < &pmx_led_white_health &pmx_led_white_pulse >; + pinctrl-names = "default"; + +- white-health { ++ led_white_health: white-health { + label = "viper:white:health"; + gpios = <&gpio0 7 GPIO_ACTIVE_HIGH>; + }; +@@ -69,9 +73,18 @@ }; }; @@ -21,7 +41,7 @@ compatible = "marvell,dsa"; #address-cells = <2>; #size-cells = <0>; -@@ -163,22 +172,22 @@ +@@ -163,22 +176,22 @@ }; partition@200000 { @@ -48,7 +68,7 @@ reg = <0x1EA0000 0x1760000>; }; -@@ -209,53 +218,6 @@ +@@ -209,53 +222,6 @@ &mdio { status = "okay"; @@ -102,7 +122,7 @@ }; &uart0 { -@@ -274,10 +236,14 @@ +@@ -274,10 +240,14 @@ }; /* eth1 is connected to the switch at port 6. However DSA only supports a diff --git a/target/linux/kirkwood/patches-4.14/105-goflexhome.patch b/target/linux/kirkwood/patches-4.14/105-goflexhome.patch index 8270613ea0..8f181ac472 100644 --- a/target/linux/kirkwood/patches-4.14/105-goflexhome.patch +++ b/target/linux/kirkwood/patches-4.14/105-goflexhome.patch @@ -10,7 +10,7 @@ kirkwood-ib62x0.dtb \ --- /dev/null +++ b/arch/arm/boot/dts/kirkwood-goflexhome.dts -@@ -0,0 +1,117 @@ +@@ -0,0 +1,123 @@ +/dts-v1/; + +#include "kirkwood.dtsi" @@ -20,6 +20,13 @@ + model = "Seagate GoFlex Home"; + compatible = "seagate,goflexhome", "marvell,kirkwood-88f6281", "marvell,kirkwood"; + ++ aliases { ++ led-boot = &led_health; ++ led-failsafe = &led_fault; ++ led-running = &led_health; ++ led-upgrade = &led_fault; ++ }; ++ + memory { + device_type = "memory"; + reg = <0x00000000 0x8000000>; @@ -62,12 +69,11 @@ + gpio-leds { + compatible = "gpio-leds"; + -+ health { ++ led_health: health { + label = "status:green:health"; + gpios = <&gpio1 14 GPIO_ACTIVE_LOW>; -+ linux,default-trigger = "default-on"; + }; -+ fault { ++ led_fault: fault { + label = "status:orange:fault"; + gpios = <&gpio1 15 GPIO_ACTIVE_LOW>; + }; diff --git a/target/linux/kirkwood/patches-4.14/106-goflexnet.patch b/target/linux/kirkwood/patches-4.14/106-goflexnet.patch index b22176880b..340a4809de 100644 --- a/target/linux/kirkwood/patches-4.14/106-goflexnet.patch +++ b/target/linux/kirkwood/patches-4.14/106-goflexnet.patch @@ -1,6 +1,35 @@ --- a/arch/arm/boot/dts/kirkwood-goflexnet.dts +++ b/arch/arm/boot/dts/kirkwood-goflexnet.dts -@@ -159,18 +159,8 @@ +@@ -8,6 +8,13 @@ + model = "Seagate GoFlex Net"; + compatible = "seagate,goflexnet", "marvell,kirkwood-88f6281", "marvell,kirkwood"; + ++ aliases { ++ led-boot = &led_health; ++ led-failsafe = &led_fault; ++ led-running = &led_health; ++ led-upgrade = &led_fault; ++ }; ++ + memory { + device_type = "memory"; + reg = <0x00000000 0x8000000>; +@@ -85,12 +92,11 @@ + >; + pinctrl-names = "default"; + +- health { ++ led_health: health { + label = "status:green:health"; + gpios = <&gpio1 14 GPIO_ACTIVE_LOW>; +- default-state = "keep"; + }; +- fault { ++ led_fault: fault { + label = "status:orange:fault"; + gpios = <&gpio1 15 GPIO_ACTIVE_LOW>; + }; +@@ -159,18 +165,8 @@ }; partition@100000 { diff --git a/target/linux/kirkwood/patches-4.14/107-02-nsa310b.patch b/target/linux/kirkwood/patches-4.14/107-02-nsa310b.patch index eefd78abdb..2da8f4f0d1 100644 --- a/target/linux/kirkwood/patches-4.14/107-02-nsa310b.patch +++ b/target/linux/kirkwood/patches-4.14/107-02-nsa310b.patch @@ -20,7 +20,7 @@ NOTE: this patch can be upstreamed as-is, LEDE-specific kirkwood-openblocks_a6.dtb \ --- /dev/null +++ b/arch/arm/boot/dts/kirkwood-nsa310b.dts -@@ -0,0 +1,124 @@ +@@ -0,0 +1,131 @@ +/dts-v1/; + +#include "kirkwood-nsa3x0-common.dtsi" @@ -34,6 +34,13 @@ NOTE: this patch can be upstreamed as-is, LEDE-specific + model = "ZyXEL NSA310b"; + compatible = "zyxel,nsa310b", "zyxel,nsa310", "marvell,kirkwood-88f6281", "marvell,kirkwood"; + ++ aliases { ++ led-boot = &led_green_sys; ++ led-failsafe = &led_red_sys; ++ led-running = &led_green_sys; ++ led-upgrade = &led_red_sys; ++ }; ++ + memory { + device_type = "memory"; + reg = <0x00000000 0x10000000>; @@ -103,11 +110,11 @@ NOTE: this patch can be upstreamed as-is, LEDE-specific + gpio-leds { + compatible = "gpio-leds"; + -+ green-sys { ++ led_green_sys: green-sys { + label = "nsa310:green:sys"; + gpios = <&gpio0 28 GPIO_ACTIVE_HIGH>; + }; -+ red-sys { ++ led_red_sys: red-sys { + label = "nsa310:red:sys"; + gpios = <&gpio0 29 GPIO_ACTIVE_HIGH>; + }; diff --git a/target/linux/kirkwood/patches-4.14/108-on100.patch b/target/linux/kirkwood/patches-4.14/108-on100.patch index 7856277e40..42da3e7332 100644 --- a/target/linux/kirkwood/patches-4.14/108-on100.patch +++ b/target/linux/kirkwood/patches-4.14/108-on100.patch @@ -1,6 +1,6 @@ --- /dev/null +++ b/arch/arm/boot/dts/kirkwood-on100.dts -@@ -0,0 +1,160 @@ +@@ -0,0 +1,164 @@ +/dts-v1/; + +#include "kirkwood.dtsi" @@ -16,6 +16,10 @@ + }; + + aliases { ++ led-boot = &led_health_green; ++ led-failsafe = &led_health_red; ++ led-running = &led_health_green; ++ led-upgrade = &led_health_red; + serial0 = &uart0; + }; + @@ -43,22 +47,22 @@ + pinctrl-0 = < &pmx_led_health_r &pmx_led_health_g >; + pinctrl-names = "default"; + -+ health-g { ++ led_health_green: health_green { + label = "on100:green:health"; + gpios = <&gpio1 12 GPIO_ACTIVE_LOW>; + }; + -+ health-r { ++ led_health_red: health_red { + label = "on100:red:health"; + gpios = <&gpio1 13 GPIO_ACTIVE_LOW>; + }; + -+ health2-g { ++ health2_green { + label = "on100:green:health2"; + gpios = <&gpio1 14 GPIO_ACTIVE_LOW>; + }; + -+ health2-r { ++ health2_red { + label = "on100:red:health2"; + gpios = <&gpio1 15 GPIO_ACTIVE_LOW>; + }; diff --git a/target/linux/kirkwood/patches-4.14/109-pogoplug_v4.patch b/target/linux/kirkwood/patches-4.14/109-pogoplug_v4.patch index b4e53cd659..f23cd93f33 100644 --- a/target/linux/kirkwood/patches-4.14/109-pogoplug_v4.patch +++ b/target/linux/kirkwood/patches-4.14/109-pogoplug_v4.patch @@ -1,6 +1,19 @@ --- a/arch/arm/boot/dts/kirkwood-pogoplug-series-4.dts +++ b/arch/arm/boot/dts/kirkwood-pogoplug-series-4.dts -@@ -24,6 +24,7 @@ +@@ -18,12 +18,20 @@ + compatible = "cloudengines,pogoplugv4", "marvell,kirkwood-88f6192", + "marvell,kirkwood"; + ++ aliases { ++ led-boot = &led_health; ++ led-failsafe = &led_fault; ++ led-running = &led_health; ++ led-upgrade = &led_fault; ++ }; ++ + memory { + device_type = "memory"; + reg = <0x00000000 0x08000000>; }; chosen { @@ -8,7 +21,7 @@ stdout-path = "uart0:115200n8"; }; -@@ -37,8 +38,8 @@ +@@ -37,8 +45,8 @@ eject { debounce_interval = <50>; wakeup-source; @@ -19,7 +32,22 @@ gpios = <&gpio0 29 GPIO_ACTIVE_LOW>; }; }; -@@ -137,29 +138,19 @@ +@@ -48,12 +56,11 @@ + pinctrl-0 = <&pmx_led_green &pmx_led_red>; + pinctrl-names = "default"; + +- health { ++ led_health: health { + label = "pogoplugv4:green:health"; + gpios = <&gpio0 22 GPIO_ACTIVE_LOW>; +- default-state = "on"; + }; +- fault { ++ led_fault: fault { + label = "pogoplugv4:red:fault"; + gpios = <&gpio0 24 GPIO_ACTIVE_LOW>; + }; +@@ -137,29 +144,19 @@ #size-cells = <1>; partition@0 { diff --git a/target/linux/kirkwood/patches-4.14/110-pogo_e02.patch b/target/linux/kirkwood/patches-4.14/110-pogo_e02.patch new file mode 100644 index 0000000000..8bba4b1a3c --- /dev/null +++ b/target/linux/kirkwood/patches-4.14/110-pogo_e02.patch @@ -0,0 +1,31 @@ +--- a/arch/arm/boot/dts/kirkwood-pogo_e02.dts ++++ b/arch/arm/boot/dts/kirkwood-pogo_e02.dts +@@ -22,6 +22,13 @@ + compatible = "cloudengines,pogoe02", "marvell,kirkwood-88f6281", + "marvell,kirkwood"; + ++ aliases { ++ led-boot = &led_health; ++ led-failsafe = &led_fault; ++ led-running = &led_health; ++ led-upgrade = &led_fault; ++ }; ++ + memory { + device_type = "memory"; + reg = <0x00000000 0x10000000>; +@@ -35,12 +42,11 @@ + gpio-leds { + compatible = "gpio-leds"; + +- health { ++ led_health: health { + label = "pogo_e02:green:health"; + gpios = <&gpio1 16 GPIO_ACTIVE_LOW>; +- default-state = "keep"; + }; +- fault { ++ led_fault: fault { + label = "pogo_e02:orange:fault"; + gpios = <&gpio1 17 GPIO_ACTIVE_LOW>; + }; diff --git a/target/linux/kirkwood/patches-4.19/100-ib62x0.patch b/target/linux/kirkwood/patches-4.19/100-ib62x0.patch index d1a5aa7d3e..494540d730 100644 --- a/target/linux/kirkwood/patches-4.19/100-ib62x0.patch +++ b/target/linux/kirkwood/patches-4.19/100-ib62x0.patch @@ -1,15 +1,37 @@ --- a/arch/arm/boot/dts/kirkwood-ib62x0.dts +++ b/arch/arm/boot/dts/kirkwood-ib62x0.dts -@@ -6,7 +6,7 @@ +@@ -6,7 +6,14 @@ / { model = "RaidSonic ICY BOX IB-NAS62x0 (Rev B)"; - compatible = "raidsonic,ib-nas6210-b", "raidsonic,ib-nas6220-b", "raidsonic,ib-nas6210", "raidsonic,ib-nas6220", "raidsonic,ib-nas62x0", "marvell,kirkwood-88f6281", "marvell,kirkwood"; + compatible = "raidsonic,ib-nas62x0", "marvell,kirkwood-88f6281", "marvell,kirkwood"; ++ ++ aliases { ++ led-boot = &led_green_os; ++ led-failsafe = &led_red_os; ++ led-running = &led_green_os; ++ led-upgrade = &led_red_os; ++ }; memory { device_type = "memory"; -@@ -118,13 +118,13 @@ +@@ -81,12 +88,11 @@ + &pmx_led_usb_transfer>; + pinctrl-names = "default"; + +- green-os { ++ led_green_os: green-os { + label = "ib62x0:green:os"; + gpios = <&gpio0 25 GPIO_ACTIVE_HIGH>; +- default-state = "keep"; + }; +- red-os { ++ led_red_os: red-os { + label = "ib62x0:red:os"; + gpios = <&gpio0 22 GPIO_ACTIVE_HIGH>; + }; +@@ -118,13 +124,13 @@ }; partition@100000 { diff --git a/target/linux/kirkwood/patches-4.19/101-iconnect.patch b/target/linux/kirkwood/patches-4.19/101-iconnect.patch index ab47b5a724..f36f50eae4 100644 --- a/target/linux/kirkwood/patches-4.19/101-iconnect.patch +++ b/target/linux/kirkwood/patches-4.19/101-iconnect.patch @@ -1,6 +1,20 @@ --- a/arch/arm/boot/dts/kirkwood-iconnect.dts +++ b/arch/arm/boot/dts/kirkwood-iconnect.dts -@@ -16,8 +16,6 @@ +@@ -8,6 +8,13 @@ + model = "Iomega Iconnect"; + compatible = "iom,iconnect-1.1", "iom,iconnect", "marvell,kirkwood-88f6281", "marvell,kirkwood"; + ++ aliases { ++ led-boot = &led_power_blue; ++ led-failsafe = &led_power_red; ++ led-running = &led_power_blue; ++ led-upgrade = &led_power_red; ++ }; ++ + memory { + device_type = "memory"; + reg = <0x00000000 0x10000000>; +@@ -16,8 +23,6 @@ chosen { bootargs = "console=ttyS0,115200n8 earlyprintk"; stdout-path = &uart0; @@ -9,7 +23,22 @@ }; ocp@f1000000 { -@@ -146,28 +144,23 @@ +@@ -89,12 +94,11 @@ + gpios = <&gpio1 9 GPIO_ACTIVE_HIGH>; + default-state = "on"; + }; +- power-blue { ++ led_power_blue: power-blue { + label = "power:blue"; + gpios = <&gpio1 10 GPIO_ACTIVE_HIGH>; +- default-state = "keep"; + }; +- power-red { ++ led_power_red: power-red { + label = "power:red"; + gpios = <&gpio1 11 GPIO_ACTIVE_HIGH>; + }; +@@ -146,28 +150,23 @@ status = "okay"; partition@0 { diff --git a/target/linux/kirkwood/patches-4.19/102-dockstar.patch b/target/linux/kirkwood/patches-4.19/102-dockstar.patch index 7462b93e0c..fb05e469bc 100644 --- a/target/linux/kirkwood/patches-4.19/102-dockstar.patch +++ b/target/linux/kirkwood/patches-4.19/102-dockstar.patch @@ -1,6 +1,35 @@ --- a/arch/arm/boot/dts/kirkwood-dockstar.dts +++ b/arch/arm/boot/dts/kirkwood-dockstar.dts -@@ -78,18 +78,22 @@ +@@ -8,6 +8,13 @@ + model = "Seagate FreeAgent Dockstar"; + compatible = "seagate,dockstar", "marvell,kirkwood-88f6281", "marvell,kirkwood"; + ++ aliases { ++ led-boot = &led_health; ++ led-failsafe = &led_fault; ++ led-running = &led_health; ++ led-upgrade = &led_fault; ++ }; ++ + memory { + device_type = "memory"; + reg = <0x00000000 0x8000000>; +@@ -42,12 +49,11 @@ + pinctrl-0 = <&pmx_led_green &pmx_led_orange>; + pinctrl-names = "default"; + +- health { ++ led_health: health { + label = "status:green:health"; + gpios = <&gpio1 14 GPIO_ACTIVE_LOW>; +- default-state = "keep"; + }; +- fault { ++ led_fault: fault { + label = "status:orange:fault"; + gpios = <&gpio1 15 GPIO_ACTIVE_LOW>; + }; +@@ -78,18 +84,22 @@ partition@0 { label = "u-boot"; diff --git a/target/linux/kirkwood/patches-4.19/103-iomega-ix2-200.patch b/target/linux/kirkwood/patches-4.19/103-iomega-ix2-200.patch index 9036ead951..73655e1293 100644 --- a/target/linux/kirkwood/patches-4.19/103-iomega-ix2-200.patch +++ b/target/linux/kirkwood/patches-4.19/103-iomega-ix2-200.patch @@ -1,6 +1,39 @@ --- a/arch/arm/boot/dts/kirkwood-iomega_ix2_200.dts +++ b/arch/arm/boot/dts/kirkwood-iomega_ix2_200.dts -@@ -186,18 +186,18 @@ +@@ -8,6 +8,13 @@ + model = "Iomega StorCenter ix2-200"; + compatible = "iom,ix2-200", "marvell,kirkwood-88f6281", "marvell,kirkwood"; + ++ aliases { ++ led-boot = &led_power; ++ led-failsafe = &led_health; ++ led-running = &led_power; ++ led-upgrade = &led_health; ++ }; ++ + memory { + device_type = "memory"; + reg = <0x00000000 0x10000000>; +@@ -127,16 +134,15 @@ + &pmx_led_rebuild &pmx_led_health >; + pinctrl-names = "default"; + +- power_led { ++ led_power: power_led { + label = "status:white:power_led"; + gpios = <&gpio0 16 GPIO_ACTIVE_HIGH>; +- default-state = "keep"; + }; + rebuild_led { + label = "status:white:rebuild_led"; + gpios = <&gpio1 4 GPIO_ACTIVE_HIGH>; + }; +- health_led { ++ led_health: health_led { + label = "status:red:health_led"; + gpios = <&gpio1 5 GPIO_ACTIVE_HIGH>; + }; +@@ -186,18 +192,18 @@ }; partition@a0000 { @@ -22,7 +55,7 @@ reg = <0x400000 0x1C00000>; }; }; -@@ -211,7 +211,7 @@ +@@ -211,7 +217,7 @@ }; ð0 { diff --git a/target/linux/kirkwood/patches-4.19/104-ea3500.patch b/target/linux/kirkwood/patches-4.19/104-ea3500.patch index 45dc670ebc..466bf714c4 100644 --- a/target/linux/kirkwood/patches-4.19/104-ea3500.patch +++ b/target/linux/kirkwood/patches-4.19/104-ea3500.patch @@ -10,7 +10,7 @@ kirkwood-lsxhl.dtb \ --- /dev/null +++ b/arch/arm/boot/dts/kirkwood-linksys-audi.dts -@@ -0,0 +1,246 @@ +@@ -0,0 +1,250 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * kirkwood-linksys-audi.dts - Device Tree file for Linksys EA3500 @@ -37,6 +37,10 @@ + }; + + aliases { ++ led-boot = &led_power; ++ led-failsafe = &led_power; ++ led-running = &led_power; ++ led-upgrade = &led_power; + serial0 = &uart0; + }; + @@ -67,7 +71,7 @@ + pinctrl-0 = < &pmx_led_green_power >; + pinctrl-names = "default"; + -+ green-power { ++ led_power: power { + label = "audi:green:power"; + gpios = <&gpio0 7 GPIO_ACTIVE_HIGH>; + }; diff --git a/target/linux/kirkwood/patches-4.19/105-ea4500.patch b/target/linux/kirkwood/patches-4.19/105-ea4500.patch index c7c8b38f95..601c1cad6d 100644 --- a/target/linux/kirkwood/patches-4.19/105-ea4500.patch +++ b/target/linux/kirkwood/patches-4.19/105-ea4500.patch @@ -1,6 +1,26 @@ --- a/arch/arm/boot/dts/kirkwood-linksys-viper.dts +++ b/arch/arm/boot/dts/kirkwood-linksys-viper.dts -@@ -67,9 +67,23 @@ +@@ -24,6 +24,10 @@ + }; + + aliases { ++ led-boot = &led_white_health; ++ led-failsafe = &led_white_health; ++ led-running = &led_white_health; ++ led-upgrade = &led_white_health; + serial0 = &uart0; + }; + +@@ -56,7 +60,7 @@ + pinctrl-0 = < &pmx_led_white_health &pmx_led_white_pulse >; + pinctrl-names = "default"; + +- white-health { ++ led_white_health: white-health { + label = "viper:white:health"; + gpios = <&gpio0 7 GPIO_ACTIVE_HIGH>; + }; +@@ -67,9 +71,23 @@ }; }; @@ -26,7 +46,7 @@ compatible = "marvell,dsa"; #address-cells = <2>; #size-cells = <0>; -@@ -161,22 +175,22 @@ +@@ -161,22 +179,22 @@ }; partition@200000 { @@ -53,7 +73,7 @@ reg = <0x1EA0000 0x1760000>; }; -@@ -207,53 +221,6 @@ +@@ -207,53 +225,6 @@ &mdio { status = "okay"; @@ -107,7 +127,7 @@ }; &uart0 { -@@ -272,10 +239,14 @@ +@@ -272,10 +243,14 @@ }; /* eth1 is connected to the switch at port 6. However DSA only supports a diff --git a/target/linux/kirkwood/patches-4.19/105-goflexhome.patch b/target/linux/kirkwood/patches-4.19/105-goflexhome.patch index 9ac30b6d30..db43a27219 100644 --- a/target/linux/kirkwood/patches-4.19/105-goflexhome.patch +++ b/target/linux/kirkwood/patches-4.19/105-goflexhome.patch @@ -10,7 +10,7 @@ kirkwood-ib62x0.dtb \ --- /dev/null +++ b/arch/arm/boot/dts/kirkwood-goflexhome.dts -@@ -0,0 +1,117 @@ +@@ -0,0 +1,123 @@ +/dts-v1/; + +#include "kirkwood.dtsi" @@ -20,6 +20,13 @@ + model = "Seagate GoFlex Home"; + compatible = "seagate,goflexhome", "marvell,kirkwood-88f6281", "marvell,kirkwood"; + ++ aliases { ++ led-boot = &led_health; ++ led-failsafe = &led_fault; ++ led-running = &led_health; ++ led-upgrade = &led_fault; ++ }; ++ + memory@0 { + device_type = "memory"; + reg = <0x00000000 0x8000000>; @@ -62,12 +69,11 @@ + gpio-leds { + compatible = "gpio-leds"; + -+ health { ++ led_health: health { + label = "status:green:health"; + gpios = <&gpio1 14 GPIO_ACTIVE_LOW>; -+ linux,default-trigger = "default-on"; + }; -+ fault { ++ led_fault: fault { + label = "status:orange:fault"; + gpios = <&gpio1 15 GPIO_ACTIVE_LOW>; + }; diff --git a/target/linux/kirkwood/patches-4.19/106-goflexnet.patch b/target/linux/kirkwood/patches-4.19/106-goflexnet.patch index b22176880b..340a4809de 100644 --- a/target/linux/kirkwood/patches-4.19/106-goflexnet.patch +++ b/target/linux/kirkwood/patches-4.19/106-goflexnet.patch @@ -1,6 +1,35 @@ --- a/arch/arm/boot/dts/kirkwood-goflexnet.dts +++ b/arch/arm/boot/dts/kirkwood-goflexnet.dts -@@ -159,18 +159,8 @@ +@@ -8,6 +8,13 @@ + model = "Seagate GoFlex Net"; + compatible = "seagate,goflexnet", "marvell,kirkwood-88f6281", "marvell,kirkwood"; + ++ aliases { ++ led-boot = &led_health; ++ led-failsafe = &led_fault; ++ led-running = &led_health; ++ led-upgrade = &led_fault; ++ }; ++ + memory { + device_type = "memory"; + reg = <0x00000000 0x8000000>; +@@ -85,12 +92,11 @@ + >; + pinctrl-names = "default"; + +- health { ++ led_health: health { + label = "status:green:health"; + gpios = <&gpio1 14 GPIO_ACTIVE_LOW>; +- default-state = "keep"; + }; +- fault { ++ led_fault: fault { + label = "status:orange:fault"; + gpios = <&gpio1 15 GPIO_ACTIVE_LOW>; + }; +@@ -159,18 +165,8 @@ }; partition@100000 { diff --git a/target/linux/kirkwood/patches-4.19/107-02-nsa310b.patch b/target/linux/kirkwood/patches-4.19/107-02-nsa310b.patch index f8b963e03f..5e2b1d8d9c 100644 --- a/target/linux/kirkwood/patches-4.19/107-02-nsa310b.patch +++ b/target/linux/kirkwood/patches-4.19/107-02-nsa310b.patch @@ -20,7 +20,7 @@ NOTE: this patch can be upstreamed as-is, LEDE-specific kirkwood-openblocks_a6.dtb \ --- /dev/null +++ b/arch/arm/boot/dts/kirkwood-nsa310b.dts -@@ -0,0 +1,124 @@ +@@ -0,0 +1,131 @@ +/dts-v1/; + +#include "kirkwood-nsa3x0-common.dtsi" @@ -34,6 +34,13 @@ NOTE: this patch can be upstreamed as-is, LEDE-specific + model = "ZyXEL NSA310b"; + compatible = "zyxel,nsa310b", "zyxel,nsa310", "marvell,kirkwood-88f6281", "marvell,kirkwood"; + ++ aliases { ++ led-boot = &led_green_sys; ++ led-failsafe = &led_red_sys; ++ led-running = &led_green_sys; ++ led-upgrade = &led_red_sys; ++ }; ++ + memory@0 { + device_type = "memory"; + reg = <0x00000000 0x10000000>; @@ -103,11 +110,11 @@ NOTE: this patch can be upstreamed as-is, LEDE-specific + gpio-leds { + compatible = "gpio-leds"; + -+ green-sys { ++ led_green_sys: green-sys { + label = "nsa310:green:sys"; + gpios = <&gpio0 28 GPIO_ACTIVE_HIGH>; + }; -+ red-sys { ++ led_red_sys: red-sys { + label = "nsa310:red:sys"; + gpios = <&gpio0 29 GPIO_ACTIVE_HIGH>; + }; diff --git a/target/linux/kirkwood/patches-4.19/108-on100.patch b/target/linux/kirkwood/patches-4.19/108-on100.patch index 2f535955dd..fa92509e2e 100644 --- a/target/linux/kirkwood/patches-4.19/108-on100.patch +++ b/target/linux/kirkwood/patches-4.19/108-on100.patch @@ -1,6 +1,6 @@ --- /dev/null +++ b/arch/arm/boot/dts/kirkwood-on100.dts -@@ -0,0 +1,158 @@ +@@ -0,0 +1,162 @@ +/dts-v1/; + +#include "kirkwood.dtsi" @@ -16,6 +16,10 @@ + }; + + aliases { ++ led-boot = &led_health_green; ++ led-failsafe = &led_health_red; ++ led-running = &led_health_green; ++ led-upgrade = &led_health_red; + serial0 = &uart0; + }; + @@ -41,22 +45,22 @@ + pinctrl-0 = < &pmx_led_health_r &pmx_led_health_g >; + pinctrl-names = "default"; + -+ health-g { ++ led_health_green: health_green { + label = "on100:green:health"; + gpios = <&gpio1 12 GPIO_ACTIVE_LOW>; + }; + -+ health-r { ++ led_health_red: health_red { + label = "on100:red:health"; + gpios = <&gpio1 13 GPIO_ACTIVE_LOW>; + }; + -+ health2-g { ++ health2_green { + label = "on100:green:health2"; + gpios = <&gpio1 14 GPIO_ACTIVE_LOW>; + }; + -+ health2-r { ++ health2_red { + label = "on100:red:health2"; + gpios = <&gpio1 15 GPIO_ACTIVE_LOW>; + }; diff --git a/target/linux/kirkwood/patches-4.19/109-pogoplug_v4.patch b/target/linux/kirkwood/patches-4.19/109-pogoplug_v4.patch index b54768290e..6967a0c815 100644 --- a/target/linux/kirkwood/patches-4.19/109-pogoplug_v4.patch +++ b/target/linux/kirkwood/patches-4.19/109-pogoplug_v4.patch @@ -1,6 +1,19 @@ --- a/arch/arm/boot/dts/kirkwood-pogoplug-series-4.dts +++ b/arch/arm/boot/dts/kirkwood-pogoplug-series-4.dts -@@ -24,6 +24,7 @@ +@@ -18,12 +18,20 @@ + compatible = "cloudengines,pogoplugv4", "marvell,kirkwood-88f6192", + "marvell,kirkwood"; + ++ aliases { ++ led-boot = &led_health; ++ led-failsafe = &led_fault; ++ led-running = &led_health; ++ led-upgrade = &led_fault; ++ }; ++ + memory { + device_type = "memory"; + reg = <0x00000000 0x08000000>; }; chosen { @@ -8,7 +21,7 @@ stdout-path = "uart0:115200n8"; }; -@@ -37,8 +38,8 @@ +@@ -37,8 +45,8 @@ eject { debounce-interval = <50>; wakeup-source; @@ -19,7 +32,22 @@ gpios = <&gpio0 29 GPIO_ACTIVE_LOW>; }; }; -@@ -137,29 +138,19 @@ +@@ -48,12 +56,11 @@ + pinctrl-0 = <&pmx_led_green &pmx_led_red>; + pinctrl-names = "default"; + +- health { ++ led_health: health { + label = "pogoplugv4:green:health"; + gpios = <&gpio0 22 GPIO_ACTIVE_LOW>; +- default-state = "on"; + }; +- fault { ++ led_fault: fault { + label = "pogoplugv4:red:fault"; + gpios = <&gpio0 24 GPIO_ACTIVE_LOW>; + }; +@@ -137,29 +144,19 @@ #size-cells = <1>; partition@0 { diff --git a/target/linux/kirkwood/patches-4.19/110-pogo_e02.patch b/target/linux/kirkwood/patches-4.19/110-pogo_e02.patch new file mode 100644 index 0000000000..82a13cca47 --- /dev/null +++ b/target/linux/kirkwood/patches-4.19/110-pogo_e02.patch @@ -0,0 +1,31 @@ +--- a/arch/arm/boot/dts/kirkwood-pogo_e02.dts ++++ b/arch/arm/boot/dts/kirkwood-pogo_e02.dts +@@ -20,6 +20,13 @@ + compatible = "cloudengines,pogoe02", "marvell,kirkwood-88f6281", + "marvell,kirkwood"; + ++ aliases { ++ led-boot = &led_health; ++ led-failsafe = &led_fault; ++ led-running = &led_health; ++ led-upgrade = &led_fault; ++ }; ++ + memory { + device_type = "memory"; + reg = <0x00000000 0x10000000>; +@@ -33,12 +40,11 @@ + gpio-leds { + compatible = "gpio-leds"; + +- health { ++ led_health: health { + label = "pogo_e02:green:health"; + gpios = <&gpio1 16 GPIO_ACTIVE_LOW>; +- default-state = "keep"; + }; +- fault { ++ led_fault: fault { + label = "pogo_e02:orange:fault"; + gpios = <&gpio1 17 GPIO_ACTIVE_LOW>; + }; -- 2.30.2