From adfbda62248258a402253744e4eed6b87fb43169 Mon Sep 17 00:00:00 2001 From: Sujith Manoharan Date: Wed, 29 Aug 2012 09:20:42 +0530 Subject: [PATCH] ath9k: Fix TX filter usage The TX filter bit for a station would be set by the HW when a frame is not acked. A frame would be completed with ATH9K_TXERR_FILT status only when the corresponding filter bit for the destination station is already set. Currently, un-acknowledged packets are added to the pending queue and retried, but the "clear_dest_mask" bit in the descriptor is set only when the TX status has been ATH9K_TXERR_FILT. This results in packet loss and the log shows: wlan0: dropped TX filtered frame, queue_len=0 PS=0 @4309746071 wlan0: dropped TX filtered frame, queue_len=0 PS=0 @4309746076 wlan0: dropped TX filtered frame, queue_len=0 PS=0 @4309746377 ... ... This issue can be resolved by making sure that the destination mask is cleared when the packet is being retried and the earlier TX status is ATH9K_TXERR_XRETRY. Signed-off-by: Sujith Manoharan Signed-off-by: John W. Linville --- drivers/net/wireless/ath/ath9k/xmit.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/net/wireless/ath/ath9k/xmit.c b/drivers/net/wireless/ath/ath9k/xmit.c index ef91f6cc2d79..b074c3a2cde1 100644 --- a/drivers/net/wireless/ath/ath9k/xmit.c +++ b/drivers/net/wireless/ath/ath9k/xmit.c @@ -568,7 +568,7 @@ static void ath_tx_complete_aggr(struct ath_softc *sc, struct ath_txq *txq, if (!an->sleeping) { ath_tx_queue_tid(txq, tid); - if (ts->ts_status & ATH9K_TXERR_FILT) + if (ts->ts_status & (ATH9K_TXERR_FILT | ATH9K_TXERR_XRETRY)) tid->ac->clear_ps_filter = true; } } -- 2.30.2