From adb00bb6a05be8b1a64820becdc052513888b280 Mon Sep 17 00:00:00 2001 From: Lei Wen <[leiwen@marvell.com]> Date: Wed, 13 Apr 2011 23:48:39 +0530 Subject: [PATCH] I2C: mv_i2c: add multi bus support Add the ability to support multiple i2c bus for mv_i2c Acked-by: Heiko Schocher Acked-by: Prafulla Wadaskar Signed-off-by: Lei Wen --- drivers/i2c/mv_i2c.c | 36 +++++++++++++++++++++++++++++++++++- 1 file changed, 35 insertions(+), 1 deletion(-) diff --git a/drivers/i2c/mv_i2c.c b/drivers/i2c/mv_i2c.c index 7ea66d4819..dcbe1aefad 100644 --- a/drivers/i2c/mv_i2c.c +++ b/drivers/i2c/mv_i2c.c @@ -66,7 +66,35 @@ struct mv_i2c { u32 isar; }; -static struct mv_i2c *base = (struct mv_i2c *)CONFIG_MV_I2C_REG; +static struct mv_i2c *base; +#ifdef CONFIG_I2C_MULTI_BUS +static u32 i2c_regs[CONFIG_MV_I2C_NUM] = CONFIG_MV_I2C_REG; +static unsigned int bus_initialized[CONFIG_MV_I2C_NUM]; +static unsigned int current_bus; + +int i2c_set_bus_num(unsigned int bus) +{ + if ((bus < 0) || (bus >= CONFIG_MV_I2C_NUM)) { + printf("Bad bus: %d\n", bus); + return -1; + } + + base = (struct mv_i2c *)i2c_regs[bus]; + current_bus = bus; + + if (!bus_initialized[current_bus]) { + i2c_init(CONFIG_SYS_I2C_SPEED, CONFIG_SYS_I2C_SLAVE); + bus_initialized[current_bus] = 1; + } + + return 0; +} + +unsigned int i2c_get_bus_num(void) +{ + return current_bus; +} +#endif /* * i2c_reset: - reset the host controller @@ -235,6 +263,12 @@ i2c_transfer_finish: /* ------------------------------------------------------------------------ */ void i2c_init(int speed, int slaveaddr) { +#ifdef CONFIG_I2C_MULTI_BUS + base = (struct mv_i2c *)i2c_regs[current_bus]; +#else + base = (struct mv_i2c *)CONFIG_MV_I2C_REG; +#endif + #ifdef CONFIG_SYS_I2C_INIT_BOARD u32 icr; /* -- 2.30.2