From aaebc7aa2eff9a0bb9e843e472cb2eb94022f12e Mon Sep 17 00:00:00 2001 From: Sungbo Eo Date: Sat, 1 Jan 2022 18:46:39 +0900 Subject: [PATCH] kirkwood: drop kernel 5.4 support It has been 3 months since we switched this target to 5.10, now we can remove the 5.4 files. Signed-off-by: Sungbo Eo --- target/linux/kirkwood/config-5.4 | 282 ---------- ...-kirkwood-Add-Check-Point-L-50-board.patch | 485 ------------------ .../kirkwood/patches-5.4/100-ib62x0.patch | 53 -- .../kirkwood/patches-5.4/101-iconnect.patch | 80 --- .../kirkwood/patches-5.4/102-dockstar.patch | 62 --- .../patches-5.4/103-iomega-ix2-200.patch | 67 --- .../patches-5.4/105-linksys-viper-dts.patch | 59 --- .../kirkwood/patches-5.4/106-goflexnet.patch | 53 -- ...-zyxel-nsa3x0-common-nand-partitions.patch | 48 -- .../kirkwood/patches-5.4/107-03-nsa325.patch | 54 -- .../patches-5.4/109-pogoplug_v4.patch | 87 ---- .../kirkwood/patches-5.4/110-pogo_e02.patch | 68 --- .../linux/kirkwood/patches-5.4/111-l-50.patch | 47 -- .../kirkwood/patches-5.4/112-sheevaplug.patch | 47 -- .../patches-5.4/113-readynas_duo_v2.patch | 76 --- ...able-sata-port-specific-led-triggers.patch | 10 - .../202-linksys-find-active-root.patch | 62 --- .../patches-5.4/203-blackarmor-nas220.patch | 99 ---- ...station-poweroff-prepare-for-new-dev.patch | 101 ---- ...-linkstation-poweroff-add-new-device.patch | 97 ---- 20 files changed, 1937 deletions(-) delete mode 100644 target/linux/kirkwood/config-5.4 delete mode 100644 target/linux/kirkwood/patches-5.4/001-ARM-dts-kirkwood-Add-Check-Point-L-50-board.patch delete mode 100644 target/linux/kirkwood/patches-5.4/100-ib62x0.patch delete mode 100644 target/linux/kirkwood/patches-5.4/101-iconnect.patch delete mode 100644 target/linux/kirkwood/patches-5.4/102-dockstar.patch delete mode 100644 target/linux/kirkwood/patches-5.4/103-iomega-ix2-200.patch delete mode 100644 target/linux/kirkwood/patches-5.4/105-linksys-viper-dts.patch delete mode 100644 target/linux/kirkwood/patches-5.4/106-goflexnet.patch delete mode 100644 target/linux/kirkwood/patches-5.4/107-01-zyxel-nsa3x0-common-nand-partitions.patch delete mode 100644 target/linux/kirkwood/patches-5.4/107-03-nsa325.patch delete mode 100644 target/linux/kirkwood/patches-5.4/109-pogoplug_v4.patch delete mode 100644 target/linux/kirkwood/patches-5.4/110-pogo_e02.patch delete mode 100644 target/linux/kirkwood/patches-5.4/111-l-50.patch delete mode 100644 target/linux/kirkwood/patches-5.4/112-sheevaplug.patch delete mode 100644 target/linux/kirkwood/patches-5.4/113-readynas_duo_v2.patch delete mode 100644 target/linux/kirkwood/patches-5.4/201-enable-sata-port-specific-led-triggers.patch delete mode 100644 target/linux/kirkwood/patches-5.4/202-linksys-find-active-root.patch delete mode 100644 target/linux/kirkwood/patches-5.4/203-blackarmor-nas220.patch delete mode 100644 target/linux/kirkwood/patches-5.4/800-power-reset-linkstation-poweroff-prepare-for-new-dev.patch delete mode 100644 target/linux/kirkwood/patches-5.4/801-power-reset-linkstation-poweroff-add-new-device.patch diff --git a/target/linux/kirkwood/config-5.4 b/target/linux/kirkwood/config-5.4 deleted file mode 100644 index 258ddce5cf..0000000000 --- a/target/linux/kirkwood/config-5.4 +++ /dev/null @@ -1,282 +0,0 @@ -CONFIG_ALIGNMENT_TRAP=y -CONFIG_ARCH_32BIT_OFF_T=y -CONFIG_ARCH_CLOCKSOURCE_DATA=y -CONFIG_ARCH_HIBERNATION_POSSIBLE=y -CONFIG_ARCH_KEEP_MEMBLOCK=y -CONFIG_ARCH_MIGHT_HAVE_PC_PARPORT=y -CONFIG_ARCH_MULTIPLATFORM=y -CONFIG_ARCH_MULTI_CPU_AUTO=y -# CONFIG_ARCH_MULTI_V4 is not set -# CONFIG_ARCH_MULTI_V4T is not set -CONFIG_ARCH_MULTI_V4_V5=y -CONFIG_ARCH_MULTI_V5=y -CONFIG_ARCH_MVEBU=y -CONFIG_ARCH_NR_GPIO=0 -CONFIG_ARCH_OPTIONAL_KERNEL_RWX=y -CONFIG_ARCH_SUSPEND_POSSIBLE=y -CONFIG_ARM=y -# CONFIG_ARMADA_37XX_WATCHDOG is not set -# CONFIG_ARMADA_THERMAL is not set -CONFIG_ARM_APPENDED_DTB=y -CONFIG_ARM_ATAG_DTB_COMPAT=y -CONFIG_ARM_ATAG_DTB_COMPAT_CMDLINE_FROM_BOOTLOADER=y -CONFIG_ARM_HAS_SG_CHAIN=y -# CONFIG_ARM_KIRKWOOD_CPUIDLE is not set -CONFIG_ARM_L1_CACHE_SHIFT=5 -# CONFIG_ARM_MVEBU_V7_CPUIDLE is not set -CONFIG_ARM_PATCH_PHYS_VIRT=y -# CONFIG_ARM_THUMB is not set -CONFIG_ARM_UNWIND=y -CONFIG_ATA=y -CONFIG_ATAGS=y -CONFIG_ATA_LEDS=y -CONFIG_AUTO_ZRELADDR=y -CONFIG_BINFMT_FLAT_ARGVP_ENVP_ON_STACK=y -CONFIG_BLK_DEV_SD=y -CONFIG_BLK_MQ_PCI=y -CONFIG_BLK_SCSI_REQUEST=y -CONFIG_CACHE_FEROCEON_L2=y -# CONFIG_CACHE_FEROCEON_L2_WRITETHROUGH is not set -CONFIG_CLKDEV_LOOKUP=y -CONFIG_CLKSRC_MMIO=y -CONFIG_CLONE_BACKWARDS=y -CONFIG_COMMON_CLK=y -CONFIG_COMPAT_32BIT_TIME=y -CONFIG_CPU_32v5=y -CONFIG_CPU_ABRT_EV5T=y -CONFIG_CPU_CACHE_VIVT=y -CONFIG_CPU_COPY_FEROCEON=y -CONFIG_CPU_CP15=y -CONFIG_CPU_CP15_MMU=y -CONFIG_CPU_FEROCEON=y -# CONFIG_CPU_FEROCEON_OLD_ID is not set -CONFIG_CPU_IDLE=y -CONFIG_CPU_IDLE_GOV_LADDER=y -CONFIG_CPU_PABRT_LEGACY=y -CONFIG_CPU_PM=y -CONFIG_CPU_THUMB_CAPABLE=y -CONFIG_CPU_TLB_FEROCEON=y -CONFIG_CPU_USE_DOMAINS=y -CONFIG_CRC16=y -# CONFIG_CRC32_SARWATE is not set -CONFIG_CRC32_SLICEBY8=y -CONFIG_CRYPTO_ACOMP2=y -CONFIG_CRYPTO_CRC32C=y -CONFIG_CRYPTO_DEFLATE=y -CONFIG_CRYPTO_DES=y -CONFIG_CRYPTO_DEV_MARVELL_CESA=y -CONFIG_CRYPTO_HASH=y -CONFIG_CRYPTO_HASH2=y -CONFIG_CRYPTO_HASH_INFO=y -CONFIG_CRYPTO_HW=y -CONFIG_CRYPTO_LIB_DES=y -CONFIG_CRYPTO_LZO=y -CONFIG_CRYPTO_RNG2=y -CONFIG_DEBUG_LL=y -CONFIG_DEBUG_LL_INCLUDE="debug/8250.S" -CONFIG_DEBUG_MVEBU_UART0_ALTERNATE=y -# CONFIG_DEBUG_MVEBU_UART1_ALTERNATE is not set -CONFIG_DEBUG_UART_8250=y -# CONFIG_DEBUG_UART_8250_FLOW_CONTROL is not set -CONFIG_DEBUG_UART_8250_SHIFT=2 -# CONFIG_DEBUG_UART_8250_WORD is not set -CONFIG_DEBUG_UART_PHYS=0xf1012000 -CONFIG_DEBUG_UART_VIRT=0xfed12000 -CONFIG_DEBUG_UNCOMPRESS=y -# CONFIG_DLCI is not set -CONFIG_DMA_REMAP=y -CONFIG_DNOTIFY=y -CONFIG_DTC=y -# CONFIG_EARLY_PRINTK is not set -CONFIG_EDAC_ATOMIC_SCRUB=y -CONFIG_EDAC_SUPPORT=y -CONFIG_FIXED_PHY=y -CONFIG_FIX_EARLYCON_MEM=y -CONFIG_FORCE_PCI=y -CONFIG_FW_LOADER_PAGED_BUF=y -CONFIG_GENERIC_ALLOCATOR=y -CONFIG_GENERIC_ATOMIC64=y -CONFIG_GENERIC_BUG=y -CONFIG_GENERIC_CLOCKEVENTS=y -CONFIG_GENERIC_CPU_AUTOPROBE=y -CONFIG_GENERIC_EARLY_IOREMAP=y -CONFIG_GENERIC_IDLE_POLL_SETUP=y -CONFIG_GENERIC_IRQ_CHIP=y -CONFIG_GENERIC_IRQ_MULTI_HANDLER=y -CONFIG_GENERIC_IRQ_SHOW=y -CONFIG_GENERIC_IRQ_SHOW_LEVEL=y -CONFIG_GENERIC_PCI_IOMAP=y -CONFIG_GENERIC_PHY=y -CONFIG_GENERIC_PINCONF=y -CONFIG_GENERIC_SCHED_CLOCK=y -CONFIG_GENERIC_SMP_IDLE_THREAD=y -CONFIG_GENERIC_STRNCPY_FROM_USER=y -CONFIG_GENERIC_STRNLEN_USER=y -CONFIG_GLOB=y -CONFIG_GPIOLIB=y -CONFIG_GPIOLIB_IRQCHIP=y -CONFIG_GPIO_MVEBU=y -CONFIG_GRO_CELLS=y -CONFIG_HANDLE_DOMAIN_IRQ=y -CONFIG_HARDIRQS_SW_RESEND=y -CONFIG_HAS_DMA=y -CONFIG_HAS_IOMEM=y -CONFIG_HAS_IOPORT_MAP=y -CONFIG_HW_RANDOM=y -CONFIG_HW_RANDOM_OMAP=y -CONFIG_HZ_FIXED=0 -CONFIG_HZ_PERIODIC=y -CONFIG_I2C=y -CONFIG_I2C_BOARDINFO=y -CONFIG_I2C_CHARDEV=y -CONFIG_I2C_MV64XXX=y -# CONFIG_I2C_PXA is not set -CONFIG_INITRAMFS_SOURCE="" -CONFIG_IRQCHIP=y -CONFIG_IRQ_DOMAIN=y -CONFIG_IRQ_FORCED_THREADING=y -CONFIG_IRQ_WORK=y -CONFIG_KIRKWOOD_CLK=y -CONFIG_KIRKWOOD_THERMAL=y -CONFIG_LEDS_GPIO=y -CONFIG_LEDS_NETXBIG=y -CONFIG_LEDS_NS2=y -CONFIG_LIBFDT=y -CONFIG_LOCK_DEBUGGING_SUPPORT=y -CONFIG_LZO_COMPRESS=y -CONFIG_LZO_DECOMPRESS=y -CONFIG_MACH_KIRKWOOD=y -CONFIG_MACH_MVEBU_ANY=y -CONFIG_MANGLE_BOOTARGS=y -CONFIG_MARVELL_PHY=y -CONFIG_MDIO_BUS=y -CONFIG_MDIO_DEVICE=y -CONFIG_MEMFD_CREATE=y -CONFIG_MIGRATION=y -CONFIG_MODULES_USE_ELF_REL=y -# CONFIG_MTD_CFI is not set -CONFIG_MTD_CMDLINE_PARTS=y -CONFIG_MTD_NAND_CORE=y -CONFIG_MTD_NAND_ECC_SW_HAMMING=y -# CONFIG_MTD_NAND_MARVELL is not set -CONFIG_MTD_NAND_ORION=y -CONFIG_MTD_RAW_NAND=y -CONFIG_MTD_UBI=y -CONFIG_MTD_UBI_BEB_LIMIT=20 -CONFIG_MTD_UBI_BLOCK=y -CONFIG_MTD_UBI_WL_THRESHOLD=4096 -CONFIG_MV643XX_ETH=y -CONFIG_MVEBU_CLK_COMMON=y -CONFIG_MVEBU_MBUS=y -CONFIG_MVMDIO=y -# CONFIG_MVNETA is not set -# CONFIG_MVPP2 is not set -CONFIG_NEED_DMA_MAP_STATE=y -CONFIG_NEED_KUSER_HELPERS=y -CONFIG_NEED_PER_CPU_KM=y -CONFIG_NET_DEVLINK=y -CONFIG_NET_DSA=y -CONFIG_NET_DSA_MV88E6XXX=y -CONFIG_NET_DSA_MV88E6XXX_GLOBAL2=y -CONFIG_NET_DSA_TAG_DSA=y -CONFIG_NET_DSA_TAG_EDSA=y -CONFIG_NET_SWITCHDEV=y -CONFIG_NLS=y -CONFIG_NVMEM=y -CONFIG_OF=y -CONFIG_OF_ADDRESS=y -CONFIG_OF_EARLY_FLATTREE=y -CONFIG_OF_FLATTREE=y -CONFIG_OF_GPIO=y -CONFIG_OF_IRQ=y -CONFIG_OF_KOBJ=y -CONFIG_OF_MDIO=y -CONFIG_OF_NET=y -CONFIG_OLD_SIGACTION=y -CONFIG_OLD_SIGSUSPEND3=y -CONFIG_ORION_IRQCHIP=y -CONFIG_ORION_TIMER=y -CONFIG_ORION_WATCHDOG=y -CONFIG_OUTER_CACHE=y -CONFIG_PAGE_OFFSET=0xC0000000 -CONFIG_PCI=y -CONFIG_PCI_BRIDGE_EMUL=y -CONFIG_PCI_DOMAINS=y -CONFIG_PCI_DOMAINS_GENERIC=y -CONFIG_PCI_MVEBU=y -CONFIG_PERF_USE_VMALLOC=y -CONFIG_PGTABLE_LEVELS=2 -CONFIG_PHYLIB=y -CONFIG_PHYLINK=y -# CONFIG_PHY_MVEBU_A3700_UTMI is not set -# CONFIG_PHY_MVEBU_A38X_COMPHY is not set -CONFIG_PHY_MVEBU_SATA=y -CONFIG_PINCTRL=y -CONFIG_PINCTRL_KIRKWOOD=y -CONFIG_PINCTRL_MVEBU=y -# CONFIG_PINCTRL_SINGLE is not set -CONFIG_PINCTRL_SX150X=y -CONFIG_PLAT_ORION=y -CONFIG_POWER_RESET=y -CONFIG_POWER_RESET_GPIO=y -CONFIG_POWER_RESET_LINKSTATION=y -# CONFIG_POWER_RESET_QNAP is not set -CONFIG_POWER_SUPPLY=y -CONFIG_RATIONAL=y -CONFIG_REFCOUNT_FULL=y -CONFIG_REGMAP=y -CONFIG_REGMAP_MMIO=y -CONFIG_REGULATOR=y -CONFIG_REGULATOR_FIXED_VOLTAGE=y -CONFIG_RTC_CLASS=y -CONFIG_RTC_DRV_MV=y -CONFIG_RTC_I2C_AND_SPI=y -CONFIG_RTC_MC146818_LIB=y -CONFIG_SATA_PMP=y -CONFIG_SCSI=y -CONFIG_SERIAL_8250_DEPRECATED_OPTIONS=y -CONFIG_SERIAL_8250_FSL=y -CONFIG_SERIAL_MCTRL_GPIO=y -# CONFIG_SERIAL_MVEBU_UART is not set -CONFIG_SERIAL_OF_PLATFORM=y -CONFIG_SGL_ALLOC=y -CONFIG_SG_POOL=y -CONFIG_SOC_BUS=y -CONFIG_SPARSE_IRQ=y -CONFIG_SPI=y -# CONFIG_SPI_ARMADA_3700 is not set -CONFIG_SPI_MASTER=y -CONFIG_SPI_ORION=y -CONFIG_SPLIT_PTLOCK_CPUS=999999 -CONFIG_SRAM=y -CONFIG_SRAM_EXEC=y -CONFIG_SRCU=y -CONFIG_SWPHY=y -CONFIG_SYS_SUPPORTS_APM_EMULATION=y -CONFIG_THERMAL=y -CONFIG_THERMAL_DEFAULT_GOV_STEP_WISE=y -CONFIG_THERMAL_EMERGENCY_POWEROFF_DELAY_MS=0 -CONFIG_THERMAL_GOV_STEP_WISE=y -CONFIG_THERMAL_OF=y -CONFIG_TICK_CPU_ACCOUNTING=y -CONFIG_TIMER_OF=y -CONFIG_TIMER_PROBE=y -CONFIG_TINY_SRCU=y -CONFIG_UBIFS_FS=y -CONFIG_UNCOMPRESS_INCLUDE="debug/uncompress.h" -CONFIG_UNWINDER_ARM=y -CONFIG_USB=y -CONFIG_USB_COMMON=y -CONFIG_USB_LED_TRIG=y -CONFIG_USB_SUPPORT=y -CONFIG_USE_OF=y -# CONFIG_VFP is not set -CONFIG_VM_EVENT_COUNTERS=y -CONFIG_WAN=y -CONFIG_WATCHDOG_CORE=y -CONFIG_XZ_DEC_ARM=y -CONFIG_XZ_DEC_BCJ=y -CONFIG_ZBOOT_ROM_BSS=0x0 -CONFIG_ZBOOT_ROM_TEXT=0x0 -CONFIG_ZLIB_DEFLATE=y -CONFIG_ZLIB_INFLATE=y diff --git a/target/linux/kirkwood/patches-5.4/001-ARM-dts-kirkwood-Add-Check-Point-L-50-board.patch b/target/linux/kirkwood/patches-5.4/001-ARM-dts-kirkwood-Add-Check-Point-L-50-board.patch deleted file mode 100644 index 52caee7b40..0000000000 --- a/target/linux/kirkwood/patches-5.4/001-ARM-dts-kirkwood-Add-Check-Point-L-50-board.patch +++ /dev/null @@ -1,485 +0,0 @@ -From efa968c18abab78c5e0c40a853caf286c3629a59 Mon Sep 17 00:00:00 2001 -From: Pawel Dembicki -Date: Tue, 17 Mar 2020 21:28:01 +0100 -Subject: [PATCH v3] ARM: dts: kirkwood: Add Check Point L-50 board - -This patch adds dts for the Check Point L-50 from 600/1100 series -routers. - -Specification: --CPU: Marvell Kirkwood 88F6821 1200MHz --RAM: 512MB --Flash: NAND 512MB --WiFi: mPCIe card based on Atheros AR9287 b/g/n --WAN: 1 Gigabit Port (Marvell 88E1116R PHY) --LAN: 9 Gigabit Ports (2x Marvell 88E6171(5+3)) --USB: 2x USB2.0 --Express card slot --SD card slot --Serial console: RJ-45 115200 8n1 --Unsupported DSL - -Reviewed-by: Andrew Lunn -Signed-off-by: Pawel Dembicki ---- -Changes in v3: -- fix typo and code style issues pointed by OpenWrt guys -Changes in v2: -- none - - arch/arm/boot/dts/Makefile | 1 + - arch/arm/boot/dts/kirkwood-l-50.dts | 438 ++++++++++++++++++++++++++++ - 2 files changed, 439 insertions(+) - create mode 100644 arch/arm/boot/dts/kirkwood-l-50.dts - ---- a/arch/arm/boot/dts/Makefile -+++ b/arch/arm/boot/dts/Makefile -@@ -270,6 +270,7 @@ dtb-$(CONFIG_MACH_KIRKWOOD) += \ - kirkwood-iomega_ix2_200.dtb \ - kirkwood-is2.dtb \ - kirkwood-km_kirkwood.dtb \ -+ kirkwood-l-50.dtb \ - kirkwood-laplug.dtb \ - kirkwood-linkstation-lsqvl.dtb \ - kirkwood-linkstation-lsvl.dtb \ ---- /dev/null -+++ b/arch/arm/boot/dts/kirkwood-l-50.dts -@@ -0,0 +1,438 @@ -+// SPDX-License-Identifier: GPL-2.0 -+/* -+ * Check Point L-50 Board Description -+ * Copyright 2020 Pawel Dembicki -+ */ -+ -+/dts-v1/; -+ -+#include "kirkwood.dtsi" -+#include "kirkwood-6281.dtsi" -+ -+/ { -+ model = "Check Point L-50"; -+ compatible = "checkpoint,l-50", "marvell,kirkwood-88f6281", "marvell,kirkwood"; -+ -+ memory { -+ device_type = "memory"; -+ reg = <0x00000000 0x20000000>; -+ }; -+ -+ chosen { -+ bootargs = "console=ttyS0,115200n8"; -+ stdout-path = &uart0; -+ }; -+ -+ ocp@f1000000 { -+ pinctrl: pin-controller@10000 { -+ pinctrl-0 = <&pmx_led38 &pmx_sysrst &pmx_button29>; -+ pinctrl-names = "default"; -+ -+ pmx_sysrst: pmx-sysrst { -+ marvell,pins = "mpp6"; -+ marvell,function = "sysrst"; -+ }; -+ -+ pmx_button29: pmx_button29 { -+ marvell,pins = "mpp29"; -+ marvell,function = "gpio"; -+ }; -+ -+ pmx_led38: pmx_led38 { -+ marvell,pins = "mpp38"; -+ marvell,function = "gpio"; -+ }; -+ -+ pmx_sdio_cd: pmx-sdio-cd { -+ marvell,pins = "mpp46"; -+ marvell,function = "gpio"; -+ }; -+ }; -+ -+ serial@12000 { -+ status = "okay"; -+ }; -+ -+ mvsdio@90000 { -+ status = "okay"; -+ cd-gpios = <&gpio1 14 9>; -+ }; -+ -+ i2c@11000 { -+ status = "okay"; -+ clock-frequency = <400000>; -+ -+ gpio2: gpio-expander@20{ -+ #gpio-cells = <2>; -+ #interrupt-cells = <2>; -+ compatible = "semtech,sx1505q"; -+ reg = <0x20>; -+ -+ gpio-controller; -+ }; -+ -+ /* Three GPIOs from 0x21 exp. are undescribed in dts: -+ * 1: DSL module reset (active low) -+ * 5: mPCIE reset (active low) -+ * 6: Express card reset (active low) -+ */ -+ gpio3: gpio-expander@21{ -+ #gpio-cells = <2>; -+ #interrupt-cells = <2>; -+ compatible = "semtech,sx1505q"; -+ reg = <0x21>; -+ -+ gpio-controller; -+ }; -+ -+ rtc@30 { -+ compatible = "s35390a"; -+ reg = <0x30>; -+ }; -+ }; -+ }; -+ -+ leds { -+ compatible = "gpio-leds"; -+ -+ status_green { -+ label = "l-50:green:status"; -+ gpios = <&gpio1 6 GPIO_ACTIVE_LOW>; -+ }; -+ -+ status_red { -+ label = "l-50:red:status"; -+ gpios = <&gpio3 2 GPIO_ACTIVE_LOW>; -+ }; -+ -+ wifi { -+ label = "l-50:green:wifi"; -+ gpios = <&gpio2 7 GPIO_ACTIVE_LOW>; -+ linux,default-trigger = "phy0tpt"; -+ }; -+ -+ internet_green { -+ label = "l-50:green:internet"; -+ gpios = <&gpio2 3 GPIO_ACTIVE_LOW>; -+ }; -+ -+ internet_red { -+ label = "l-50:red:internet"; -+ gpios = <&gpio2 1 GPIO_ACTIVE_LOW>; -+ }; -+ -+ usb1_green { -+ label = "l-50:green:usb1"; -+ gpios = <&gpio2 0 GPIO_ACTIVE_LOW>; -+ linux,default-trigger = "usbport"; -+ trigger-sources = <&hub_port3>; -+ }; -+ -+ usb1_red { -+ label = "l-50:red:usb1"; -+ gpios = <&gpio2 4 GPIO_ACTIVE_LOW>; -+ }; -+ -+ usb2_green { -+ label = "l-50:green:usb2"; -+ gpios = <&gpio2 2 GPIO_ACTIVE_LOW>; -+ linux,default-trigger = "usbport"; -+ trigger-sources = <&hub_port1>; -+ }; -+ -+ usb2_red { -+ label = "l-50:red:usb2"; -+ gpios = <&gpio2 5 GPIO_ACTIVE_LOW>; -+ }; -+ }; -+ -+ usb2_pwr { -+ compatible = "regulator-fixed"; -+ regulator-name = "usb2_pwr"; -+ -+ regulator-min-microvolt = <5000000>; -+ regulator-max-microvolt = <5000000>; -+ gpio = <&gpio3 3 GPIO_ACTIVE_LOW>; -+ regulator-always-on; -+ }; -+ -+ usb1_pwr { -+ compatible = "regulator-fixed"; -+ regulator-name = "usb1_pwr"; -+ -+ regulator-min-microvolt = <5000000>; -+ regulator-max-microvolt = <5000000>; -+ gpio = <&gpio3 4 GPIO_ACTIVE_LOW>; -+ regulator-always-on; -+ }; -+ -+ mpcie_pwr { -+ compatible = "regulator-fixed"; -+ regulator-name = "mpcie_pwr"; -+ -+ regulator-min-microvolt = <3300000>; -+ regulator-max-microvolt = <3300000>; -+ gpio = <&gpio3 5 GPIO_ACTIVE_HIGH>; -+ enable-active-high; -+ regulator-always-on; -+ }; -+ -+ express_card_pwr { -+ compatible = "regulator-fixed"; -+ regulator-name = "express_card_pwr"; -+ -+ regulator-min-microvolt = <3300000>; -+ regulator-max-microvolt = <3300000>; -+ gpio = <&gpio3 7 GPIO_ACTIVE_HIGH>; -+ enable-active-high; -+ regulator-always-on; -+ }; -+ -+ keys { -+ compatible = "gpio-keys"; -+ -+ factory_defaults { -+ label = "factory_defaults"; -+ gpios = <&gpio0 29 GPIO_ACTIVE_LOW>; -+ linux,code = ; -+ }; -+ }; -+}; -+ -+&mdio { -+ status = "okay"; -+ -+ ethphy8: ethernet-phy@8 { -+ reg = <0x08>; -+ }; -+ -+ switch0: switch@10 { -+ compatible = "marvell,mv88e6085"; -+ #address-cells = <1>; -+ #size-cells = <0>; -+ reg = <0x10>; -+ dsa,member = <0 0>; -+ -+ ports { -+ #address-cells = <1>; -+ #size-cells = <0>; -+ -+ port@0 { -+ reg = <0>; -+ label = "lan5"; -+ }; -+ -+ port@1 { -+ reg = <1>; -+ label = "lan1"; -+ }; -+ -+ port@2 { -+ reg = <2>; -+ label = "lan6"; -+ }; -+ -+ port@3 { -+ reg = <3>; -+ label = "lan2"; -+ }; -+ -+ port@4 { -+ reg = <4>; -+ label = "lan7"; -+ }; -+ -+ switch0port5: port@5 { -+ reg = <5>; -+ phy-mode = "rgmii-txid"; -+ link = <&switch1port5>; -+ fixed-link { -+ speed = <1000>; -+ full-duplex; -+ }; -+ }; -+ -+ port@6 { -+ reg = <6>; -+ label = "cpu"; -+ phy-mode = "rgmii-id"; -+ ethernet = <ð1port>; -+ fixed-link { -+ speed = <1000>; -+ full-duplex; -+ }; -+ }; -+ }; -+ }; -+ -+ switch@11 { -+ compatible = "marvell,mv88e6085"; -+ #address-cells = <1>; -+ #size-cells = <0>; -+ reg = <0x11>; -+ dsa,member = <0 1>; -+ -+ ports { -+ #address-cells = <1>; -+ #size-cells = <0>; -+ -+ port@0 { -+ reg = <0>; -+ label = "lan3"; -+ }; -+ -+ port@1 { -+ reg = <1>; -+ label = "lan8"; -+ }; -+ -+ port@2 { -+ reg = <2>; -+ label = "lan4"; -+ }; -+ -+ port@3 { -+ reg = <3>; -+ label = "dmz"; -+ }; -+ -+ switch1port5: port@5 { -+ reg = <5>; -+ phy-mode = "rgmii-txid"; -+ link = <&switch0port5>; -+ fixed-link { -+ speed = <1000>; -+ full-duplex; -+ }; -+ }; -+ -+ port@6 { -+ reg = <6>; -+ label = "dsl"; -+ fixed-link { -+ speed = <100>; -+ full-duplex; -+ }; -+ }; -+ }; -+ }; -+}; -+ -+ð0 { -+ status = "okay"; -+ ethernet0-port@0 { -+ phy-handle = <ðphy8>; -+ }; -+}; -+ -+ð1 { -+ status = "okay"; -+ ethernet1-port@0 { -+ speed = <1000>; -+ duplex = <1>; -+ }; -+}; -+ -+&nand { -+ status = "okay"; -+ pinctrl-0 = <&pmx_nand>; -+ pinctrl-names = "default"; -+ -+ partition@0 { -+ label = "u-boot"; -+ reg = <0x00000000 0x000c0000>; -+ }; -+ -+ partition@a0000 { -+ label = "bootldr-env"; -+ reg = <0x000c0000 0x00040000>; -+ }; -+ -+ partition@100000 { -+ label = "kernel-1"; -+ reg = <0x00100000 0x00800000>; -+ }; -+ -+ partition@900000 { -+ label = "rootfs-1"; -+ reg = <0x00900000 0x07100000>; -+ }; -+ -+ partition@7a00000 { -+ label = "kernel-2"; -+ reg = <0x07a00000 0x00800000>; -+ }; -+ -+ partition@8200000 { -+ label = "rootfs-2"; -+ reg = <0x08200000 0x07100000>; -+ }; -+ -+ partition@f300000 { -+ label = "default_sw"; -+ reg = <0x0f300000 0x07900000>; -+ }; -+ -+ partition@16c00000 { -+ label = "logs"; -+ reg = <0x16c00000 0x01800000>; -+ }; -+ -+ partition@18400000 { -+ label = "preset_cfg"; -+ reg = <0x18400000 0x00100000>; -+ }; -+ -+ partition@18500000 { -+ label = "adsl"; -+ reg = <0x18500000 0x00100000>; -+ }; -+ -+ partition@18600000 { -+ label = "storage"; -+ reg = <0x18600000 0x07a00000>; -+ }; -+}; -+ -+&rtc { -+ status = "disabled"; -+}; -+ -+&pciec { -+ status = "okay"; -+}; -+ -+&pcie0 { -+ status = "okay"; -+}; -+ -+&sata_phy0 { -+ status = "disabled"; -+}; -+ -+&sata_phy1 { -+ status = "disabled"; -+}; -+ -+&usb0 { -+ #address-cells = <1>; -+ #size-cells = <0>; -+ status = "okay"; -+ -+ port@1 { -+ #address-cells = <1>; -+ #size-cells = <0>; -+ reg = <1>; -+ #trigger-source-cells = <0>; -+ -+ hub_port1: port@1 { -+ reg = <1>; -+ #trigger-source-cells = <0>; -+ }; -+ -+ hub_port3: port@3 { -+ reg = <3>; -+ #trigger-source-cells = <0>; -+ }; -+ }; -+}; diff --git a/target/linux/kirkwood/patches-5.4/100-ib62x0.patch b/target/linux/kirkwood/patches-5.4/100-ib62x0.patch deleted file mode 100644 index 0637c24b63..0000000000 --- a/target/linux/kirkwood/patches-5.4/100-ib62x0.patch +++ /dev/null @@ -1,53 +0,0 @@ ---- a/arch/arm/boot/dts/kirkwood-ib62x0.dts -+++ b/arch/arm/boot/dts/kirkwood-ib62x0.dts -@@ -6,7 +6,14 @@ - - / { - model = "RaidSonic ICY BOX IB-NAS62x0 (Rev B)"; -- compatible = "raidsonic,ib-nas6210-b", "raidsonic,ib-nas6220-b", "raidsonic,ib-nas6210", "raidsonic,ib-nas6220", "raidsonic,ib-nas62x0", "marvell,kirkwood-88f6281", "marvell,kirkwood"; -+ compatible = "raidsonic,ib-nas62x0", "marvell,kirkwood-88f6281", "marvell,kirkwood"; -+ -+ aliases { -+ led-boot = &led_green_os; -+ led-failsafe = &led_red_os; -+ led-running = &led_green_os; -+ led-upgrade = &led_red_os; -+ }; - - memory { - device_type = "memory"; -@@ -81,12 +88,12 @@ - &pmx_led_usb_transfer>; - pinctrl-names = "default"; - -- green-os { -+ led_green_os: green-os { - label = "ib62x0:green:os"; - gpios = <&gpio0 25 GPIO_ACTIVE_HIGH>; -- default-state = "keep"; -+ default-state = "on"; - }; -- red-os { -+ led_red_os: red-os { - label = "ib62x0:red:os"; - gpios = <&gpio0 22 GPIO_ACTIVE_HIGH>; - }; -@@ -118,13 +125,13 @@ - }; - - partition@100000 { -- label = "uImage"; -- reg = <0x0100000 0x600000>; -+ label = "second stage u-boot"; -+ reg = <0x100000 0x200000>; - }; - -- partition@700000 { -- label = "root"; -- reg = <0x0700000 0xf900000>; -+ partition@200000 { -+ label = "ubi"; -+ reg = <0x200000 0xfe00000>; - }; - - }; diff --git a/target/linux/kirkwood/patches-5.4/101-iconnect.patch b/target/linux/kirkwood/patches-5.4/101-iconnect.patch deleted file mode 100644 index 935e2dfcf5..0000000000 --- a/target/linux/kirkwood/patches-5.4/101-iconnect.patch +++ /dev/null @@ -1,80 +0,0 @@ ---- a/arch/arm/boot/dts/kirkwood-iconnect.dts -+++ b/arch/arm/boot/dts/kirkwood-iconnect.dts -@@ -8,6 +8,13 @@ - model = "Iomega Iconnect"; - compatible = "iom,iconnect-1.1", "iom,iconnect", "marvell,kirkwood-88f6281", "marvell,kirkwood"; - -+ aliases { -+ led-boot = &led_power_blue; -+ led-failsafe = &led_power_red; -+ led-running = &led_power_blue; -+ led-upgrade = &led_power_red; -+ }; -+ - memory { - device_type = "memory"; - reg = <0x00000000 0x10000000>; -@@ -16,8 +23,6 @@ - chosen { - bootargs = "console=ttyS0,115200n8 earlyprintk"; - stdout-path = &uart0; -- linux,initrd-start = <0x4500040>; -- linux,initrd-end = <0x4800000>; - }; - - ocp@f1000000 { -@@ -89,12 +94,12 @@ - gpios = <&gpio1 9 GPIO_ACTIVE_HIGH>; - default-state = "on"; - }; -- power-blue { -+ led_power_blue: power-blue { - label = "power:blue"; - gpios = <&gpio1 10 GPIO_ACTIVE_HIGH>; -- default-state = "keep"; -+ default-state = "on"; - }; -- power-red { -+ led_power_red: power-red { - label = "power:red"; - gpios = <&gpio1 11 GPIO_ACTIVE_HIGH>; - }; -@@ -146,28 +151,23 @@ - status = "okay"; - - partition@0 { -- label = "uboot"; -- reg = <0x0000000 0xc0000>; -+ label = "u-boot"; -+ reg = <0x0000000 0xe0000>; - }; - -- partition@a0000 { -- label = "env"; -- reg = <0xa0000 0x20000>; -+ partition@e0000 { -+ label = "u-boot environment"; -+ reg = <0xe0000 0x100000>; - }; - - partition@100000 { -- label = "zImage"; -- reg = <0x100000 0x300000>; -- }; -- -- partition@540000 { -- label = "initrd"; -- reg = <0x540000 0x300000>; -+ label = "second stage u-boot"; -+ reg = <0x100000 0x200000>; - }; - -- partition@980000 { -- label = "boot"; -- reg = <0x980000 0x1f400000>; -+ partition@200000 { -+ label = "ubi"; -+ reg = <0x200000 0x1fe00000>; - }; - }; - diff --git a/target/linux/kirkwood/patches-5.4/102-dockstar.patch b/target/linux/kirkwood/patches-5.4/102-dockstar.patch deleted file mode 100644 index 127f84962c..0000000000 --- a/target/linux/kirkwood/patches-5.4/102-dockstar.patch +++ /dev/null @@ -1,62 +0,0 @@ ---- a/arch/arm/boot/dts/kirkwood-dockstar.dts -+++ b/arch/arm/boot/dts/kirkwood-dockstar.dts -@@ -8,6 +8,13 @@ - model = "Seagate FreeAgent Dockstar"; - compatible = "seagate,dockstar", "marvell,kirkwood-88f6281", "marvell,kirkwood"; - -+ aliases { -+ led-boot = &led_health; -+ led-failsafe = &led_fault; -+ led-running = &led_health; -+ led-upgrade = &led_fault; -+ }; -+ - memory { - device_type = "memory"; - reg = <0x00000000 0x8000000>; -@@ -42,12 +49,12 @@ - pinctrl-0 = <&pmx_led_green &pmx_led_orange>; - pinctrl-names = "default"; - -- health { -+ led_health: health { - label = "status:green:health"; - gpios = <&gpio1 14 GPIO_ACTIVE_LOW>; -- default-state = "keep"; -+ default-state = "on"; - }; -- fault { -+ led_fault: fault { - label = "status:orange:fault"; - gpios = <&gpio1 15 GPIO_ACTIVE_LOW>; - }; -@@ -78,18 +85,22 @@ - - partition@0 { - label = "u-boot"; -- reg = <0x0000000 0x100000>; -- read-only; -+ reg = <0x0000000 0xe0000>; -+ }; -+ -+ partition@e0000 { -+ label = "u-boot environment"; -+ reg = <0xe0000 0x100000>; - }; - - partition@100000 { -- label = "uImage"; -- reg = <0x0100000 0x400000>; -+ label = "second stage u-boot"; -+ reg = <0x100000 0x200000>; - }; - -- partition@500000 { -- label = "data"; -- reg = <0x0500000 0xfb00000>; -+ partition@200000 { -+ label = "ubi"; -+ reg = <0x200000 0xfe00000>; - }; - }; - diff --git a/target/linux/kirkwood/patches-5.4/103-iomega-ix2-200.patch b/target/linux/kirkwood/patches-5.4/103-iomega-ix2-200.patch deleted file mode 100644 index 9313b4bc3e..0000000000 --- a/target/linux/kirkwood/patches-5.4/103-iomega-ix2-200.patch +++ /dev/null @@ -1,67 +0,0 @@ ---- a/arch/arm/boot/dts/kirkwood-iomega_ix2_200.dts -+++ b/arch/arm/boot/dts/kirkwood-iomega_ix2_200.dts -@@ -8,6 +8,13 @@ - model = "Iomega StorCenter ix2-200"; - compatible = "iom,ix2-200", "marvell,kirkwood-88f6281", "marvell,kirkwood"; - -+ aliases { -+ led-boot = &led_power; -+ led-failsafe = &led_health; -+ led-running = &led_power; -+ led-upgrade = &led_health; -+ }; -+ - memory { - device_type = "memory"; - reg = <0x00000000 0x10000000>; -@@ -127,16 +134,16 @@ - &pmx_led_rebuild &pmx_led_health >; - pinctrl-names = "default"; - -- power_led { -+ led_power: power_led { - label = "status:white:power_led"; - gpios = <&gpio0 16 GPIO_ACTIVE_HIGH>; -- default-state = "keep"; -+ default-state = "on"; - }; - rebuild_led { - label = "status:white:rebuild_led"; - gpios = <&gpio1 4 GPIO_ACTIVE_HIGH>; - }; -- health_led { -+ led_health: health_led { - label = "status:red:health_led"; - gpios = <&gpio1 5 GPIO_ACTIVE_HIGH>; - }; -@@ -186,18 +193,18 @@ - }; - - partition@a0000 { -- label = "env"; -+ label = "u-boot environment"; - reg = <0xa0000 0x20000>; - read-only; - }; - - partition@100000 { -- label = "uImage"; -+ label = "kernel"; - reg = <0x100000 0x300000>; - }; - - partition@400000 { -- label = "rootfs"; -+ label = "ubi"; - reg = <0x400000 0x1C00000>; - }; - }; -@@ -211,7 +218,7 @@ - }; - - ð0 { -- status = "okay"; -+ status = "disabled"; - ethernet0-port@0 { - speed = <1000>; - duplex = <1>; diff --git a/target/linux/kirkwood/patches-5.4/105-linksys-viper-dts.patch b/target/linux/kirkwood/patches-5.4/105-linksys-viper-dts.patch deleted file mode 100644 index d56a469d94..0000000000 --- a/target/linux/kirkwood/patches-5.4/105-linksys-viper-dts.patch +++ /dev/null @@ -1,59 +0,0 @@ ---- a/arch/arm/boot/dts/kirkwood-linksys-viper.dts -+++ b/arch/arm/boot/dts/kirkwood-linksys-viper.dts -@@ -24,6 +24,10 @@ - }; - - aliases { -+ led-boot = &led_white_health; -+ led-failsafe = &led_white_health; -+ led-running = &led_white_health; -+ led-upgrade = &led_white_health; - serial0 = &uart0; - }; - -@@ -56,9 +60,10 @@ - pinctrl-0 = < &pmx_led_white_health &pmx_led_white_pulse >; - pinctrl-names = "default"; - -- white-health { -+ led_white_health: white-health { - label = "viper:white:health"; - gpios = <&gpio0 7 GPIO_ACTIVE_HIGH>; -+ default-state = "on"; - }; - - white-pulse { -@@ -114,23 +119,23 @@ - }; - - partition@200000 { -- label = "kernel"; -- reg = <0x200000 0x2A0000>; -+ label = "kernel1"; -+ reg = <0x200000 0x1A00000>; - }; - -- partition@4a0000 { -- label = "rootfs"; -- reg = <0x4A0000 0x1760000>; -+ partition@500000 { -+ label = "rootfs1"; -+ reg = <0x500000 0x1700000>; - }; - - partition@1c00000 { -- label = "alt_kernel"; -- reg = <0x1C00000 0x2A0000>; -+ label = "kernel2"; -+ reg = <0x1C00000 0x1A00000>; - }; - -- partition@1ea0000 { -- label = "alt_rootfs"; -- reg = <0x1EA0000 0x1760000>; -+ partition@1f00000 { -+ label = "rootfs2"; -+ reg = <0x1F00000 0x1700000>; - }; - - partition@3600000 { diff --git a/target/linux/kirkwood/patches-5.4/106-goflexnet.patch b/target/linux/kirkwood/patches-5.4/106-goflexnet.patch deleted file mode 100644 index 82cf90841e..0000000000 --- a/target/linux/kirkwood/patches-5.4/106-goflexnet.patch +++ /dev/null @@ -1,53 +0,0 @@ ---- a/arch/arm/boot/dts/kirkwood-goflexnet.dts -+++ b/arch/arm/boot/dts/kirkwood-goflexnet.dts -@@ -8,6 +8,13 @@ - model = "Seagate GoFlex Net"; - compatible = "seagate,goflexnet", "marvell,kirkwood-88f6281", "marvell,kirkwood"; - -+ aliases { -+ led-boot = &led_health; -+ led-failsafe = &led_fault; -+ led-running = &led_health; -+ led-upgrade = &led_fault; -+ }; -+ - memory { - device_type = "memory"; - reg = <0x00000000 0x8000000>; -@@ -85,12 +92,12 @@ - >; - pinctrl-names = "default"; - -- health { -+ led_health: health { - label = "status:green:health"; - gpios = <&gpio1 14 GPIO_ACTIVE_LOW>; -- default-state = "keep"; -+ default-state = "on"; - }; -- fault { -+ led_fault: fault { - label = "status:orange:fault"; - gpios = <&gpio1 15 GPIO_ACTIVE_LOW>; - }; -@@ -159,18 +166,8 @@ - }; - - partition@100000 { -- label = "uImage"; -- reg = <0x0100000 0x400000>; -- }; -- -- partition@500000 { -- label = "pogoplug"; -- reg = <0x0500000 0x2000000>; -- }; -- -- partition@2500000 { -- label = "root"; -- reg = <0x02500000 0xd800000>; -+ label = "ubi"; -+ reg = <0x0100000 0x0ff00000>; - }; - }; - diff --git a/target/linux/kirkwood/patches-5.4/107-01-zyxel-nsa3x0-common-nand-partitions.patch b/target/linux/kirkwood/patches-5.4/107-01-zyxel-nsa3x0-common-nand-partitions.patch deleted file mode 100644 index df654033fd..0000000000 --- a/target/linux/kirkwood/patches-5.4/107-01-zyxel-nsa3x0-common-nand-partitions.patch +++ /dev/null @@ -1,48 +0,0 @@ ---- a/arch/arm/boot/dts/kirkwood-nsa3x0-common.dtsi -+++ b/arch/arm/boot/dts/kirkwood-nsa3x0-common.dtsi -@@ -112,40 +112,16 @@ - - partition@0 { - label = "uboot"; -- reg = <0x0000000 0x0100000>; -+ reg = <0x0000000 0x00c0000>; - read-only; - }; - partition@100000 { - label = "uboot_env"; -- reg = <0x0100000 0x0080000>; -+ reg = <0x00c0000 0x0080000>; - }; -- partition@180000 { -- label = "key_store"; -- reg = <0x0180000 0x0080000>; -- }; -- partition@200000 { -- label = "info"; -- reg = <0x0200000 0x0080000>; -- }; -- partition@280000 { -- label = "etc"; -- reg = <0x0280000 0x0a00000>; -- }; -- partition@c80000 { -- label = "kernel_1"; -- reg = <0x0c80000 0x0a00000>; -- }; -- partition@1680000 { -- label = "rootfs1"; -- reg = <0x1680000 0x2fc0000>; -- }; -- partition@4640000 { -- label = "kernel_2"; -- reg = <0x4640000 0x0a00000>; -- }; -- partition@5040000 { -- label = "rootfs2"; -- reg = <0x5040000 0x2fc0000>; -+ partition@140000 { -+ label = "ubi"; -+ reg = <0x0140000 0x7ec0000>; - }; - }; - diff --git a/target/linux/kirkwood/patches-5.4/107-03-nsa325.patch b/target/linux/kirkwood/patches-5.4/107-03-nsa325.patch deleted file mode 100644 index 374c0895a9..0000000000 --- a/target/linux/kirkwood/patches-5.4/107-03-nsa325.patch +++ /dev/null @@ -1,54 +0,0 @@ ---- a/arch/arm/boot/dts/kirkwood-nsa325.dts -+++ b/arch/arm/boot/dts/kirkwood-nsa325.dts -@@ -15,6 +15,13 @@ - model = "ZyXEL NSA325"; - compatible = "zyxel,nsa325", "marvell,kirkwood-88f6282", "marvell,kirkwood"; - -+ aliases { -+ led-boot = &led_green_sys; -+ led-failsafe = &led_orange_sys; -+ led-running = &led_green_sys; -+ led-upgrade = &led_orange_sys; -+ }; -+ - memory { - device_type = "memory"; - reg = <0x00000000 0x20000000>; -@@ -162,17 +169,19 @@ - &pmx_led_hdd1_green &pmx_led_hdd1_red>; - pinctrl-names = "default"; - -- green-sys { -+ led_green_sys: green-sys { - label = "nsa325:green:sys"; - gpios = <&gpio0 28 GPIO_ACTIVE_HIGH>; -+ default-state = "on"; - }; -- orange-sys { -+ led_orange_sys: orange-sys { - label = "nsa325:orange:sys"; - gpios = <&gpio0 29 GPIO_ACTIVE_HIGH>; - }; - green-hdd1 { - label = "nsa325:green:hdd1"; - gpios = <&gpio1 9 GPIO_ACTIVE_HIGH>; -+ linux,default-trigger = "ata1"; - }; - red-hdd1 { - label = "nsa325:red:hdd1"; -@@ -181,6 +190,7 @@ - green-hdd2 { - label = "nsa325:green:hdd2"; - gpios = <&gpio0 12 GPIO_ACTIVE_HIGH>; -+ linux,default-trigger = "ata2"; - }; - red-hdd2 { - label = "nsa325:red:hdd2"; -@@ -189,6 +199,7 @@ - green-usb { - label = "nsa325:green:usb"; - gpios = <&gpio0 15 GPIO_ACTIVE_HIGH>; -+ linux,default-trigger = "usb-host"; - }; - green-copy { - label = "nsa325:green:copy"; diff --git a/target/linux/kirkwood/patches-5.4/109-pogoplug_v4.patch b/target/linux/kirkwood/patches-5.4/109-pogoplug_v4.patch deleted file mode 100644 index 4273eb9af1..0000000000 --- a/target/linux/kirkwood/patches-5.4/109-pogoplug_v4.patch +++ /dev/null @@ -1,87 +0,0 @@ ---- a/arch/arm/boot/dts/kirkwood-pogoplug-series-4.dts -+++ b/arch/arm/boot/dts/kirkwood-pogoplug-series-4.dts -@@ -18,12 +18,20 @@ - compatible = "cloudengines,pogoplugv4", "marvell,kirkwood-88f6192", - "marvell,kirkwood"; - -+ aliases { -+ led-boot = &led_health; -+ led-failsafe = &led_fault; -+ led-running = &led_health; -+ led-upgrade = &led_fault; -+ }; -+ - memory { - device_type = "memory"; - reg = <0x00000000 0x08000000>; - }; - - chosen { -+ bootargs = "console=ttyS0,115200"; - stdout-path = "uart0:115200n8"; - }; - -@@ -37,8 +45,8 @@ - eject { - debounce-interval = <50>; - wakeup-source; -- linux,code = ; -- label = "Eject Button"; -+ linux,code = ; -+ label = "Reset"; - gpios = <&gpio0 29 GPIO_ACTIVE_LOW>; - }; - }; -@@ -48,12 +56,12 @@ - pinctrl-0 = <&pmx_led_green &pmx_led_red>; - pinctrl-names = "default"; - -- health { -+ led_health: health { - label = "pogoplugv4:green:health"; - gpios = <&gpio0 22 GPIO_ACTIVE_LOW>; - default-state = "on"; - }; -- fault { -+ led_fault: fault { - label = "pogoplugv4:red:fault"; - gpios = <&gpio0 24 GPIO_ACTIVE_LOW>; - }; -@@ -137,29 +145,19 @@ - #size-cells = <1>; - - partition@0 { -- label = "u-boot"; -- reg = <0x00000000 0x200000>; -+ label = "uboot"; -+ reg = <0x00000000 0x1c0000>; - read-only; - }; - -- partition@200000 { -- label = "uImage"; -- reg = <0x00200000 0x300000>; -- }; -- -- partition@500000 { -- label = "uImage2"; -- reg = <0x00500000 0x300000>; -- }; -- -- partition@800000 { -- label = "failsafe"; -- reg = <0x00800000 0x800000>; -+ partition@1c0000 { -+ label = "uboot_env"; -+ reg = <0x001c0000 0x40000>; - }; - -- partition@1000000 { -- label = "root"; -- reg = <0x01000000 0x7000000>; -+ partition@200000 { -+ label = "ubi"; -+ reg = <0x00200000 0x7e00000>; - }; - }; - }; diff --git a/target/linux/kirkwood/patches-5.4/110-pogo_e02.patch b/target/linux/kirkwood/patches-5.4/110-pogo_e02.patch deleted file mode 100644 index fc384d3521..0000000000 --- a/target/linux/kirkwood/patches-5.4/110-pogo_e02.patch +++ /dev/null @@ -1,68 +0,0 @@ ---- a/arch/arm/boot/dts/kirkwood-pogo_e02.dts -+++ b/arch/arm/boot/dts/kirkwood-pogo_e02.dts -@@ -20,6 +20,13 @@ - compatible = "cloudengines,pogoe02", "marvell,kirkwood-88f6281", - "marvell,kirkwood"; - -+ aliases { -+ led-boot = &led_health; -+ led-failsafe = &led_fault; -+ led-running = &led_health; -+ led-upgrade = &led_fault; -+ }; -+ - memory { - device_type = "memory"; - reg = <0x00000000 0x10000000>; -@@ -33,12 +40,12 @@ - gpio-leds { - compatible = "gpio-leds"; - -- health { -+ led_health: health { - label = "pogo_e02:green:health"; - gpios = <&gpio1 16 GPIO_ACTIVE_LOW>; -- default-state = "keep"; -+ default-state = "on"; - }; -- fault { -+ led_fault: fault { - label = "pogo_e02:orange:fault"; - gpios = <&gpio1 17 GPIO_ACTIVE_LOW>; - }; -@@ -95,24 +102,24 @@ - status = "okay"; - - partition@0 { -- label = "u-boot"; -- reg = <0x0000000 0x100000>; -+ label = "uboot"; -+ reg = <0x0 0xe0000>; - read-only; - }; - -- partition@100000 { -- label = "uImage"; -- reg = <0x0100000 0x400000>; -+ partition@e0000 { -+ label = "uboot_env"; -+ reg = <0xe0000 0x20000>; - }; - -- partition@500000 { -- label = "pogoplug"; -- reg = <0x0500000 0x2000000>; -+ partition@100000 { -+ label = "second_stage_uboot"; -+ reg = <0x100000 0x100000>; - }; - -- partition@2500000 { -- label = "root"; -- reg = <0x02500000 0x5b00000>; -+ partition@200000 { -+ label = "ubi"; -+ reg = <0x200000 0x7e00000>; - }; - }; - diff --git a/target/linux/kirkwood/patches-5.4/111-l-50.patch b/target/linux/kirkwood/patches-5.4/111-l-50.patch deleted file mode 100644 index bc933cb610..0000000000 --- a/target/linux/kirkwood/patches-5.4/111-l-50.patch +++ /dev/null @@ -1,47 +0,0 @@ ---- a/arch/arm/boot/dts/kirkwood-l-50.dts -+++ b/arch/arm/boot/dts/kirkwood-l-50.dts -@@ -18,6 +18,13 @@ - reg = <0x00000000 0x20000000>; - }; - -+ aliases { -+ led-boot = &led_status_green; -+ led-failsafe = &led_status_red; -+ led-running = &led_status_green; -+ led-upgrade = &led_status_red; -+ }; -+ - chosen { - bootargs = "console=ttyS0,115200n8"; - stdout-path = &uart0; -@@ -95,12 +102,12 @@ - leds { - compatible = "gpio-leds"; - -- status_green { -+ led_status_green: status_green { - label = "l-50:green:status"; - gpios = <&gpio1 6 GPIO_ACTIVE_LOW>; - }; - -- status_red { -+ led_status_red: status_red { - label = "l-50:red:status"; - gpios = <&gpio3 2 GPIO_ACTIVE_LOW>; - }; -@@ -349,13 +356,8 @@ - }; - - partition@100000 { -- label = "kernel-1"; -- reg = <0x00100000 0x00800000>; -- }; -- -- partition@900000 { -- label = "rootfs-1"; -- reg = <0x00900000 0x07100000>; -+ label = "ubi"; -+ reg = <0x00100000 0x07900000>; - }; - - partition@7a00000 { diff --git a/target/linux/kirkwood/patches-5.4/112-sheevaplug.patch b/target/linux/kirkwood/patches-5.4/112-sheevaplug.patch deleted file mode 100644 index d1ff9884a0..0000000000 --- a/target/linux/kirkwood/patches-5.4/112-sheevaplug.patch +++ /dev/null @@ -1,47 +0,0 @@ ---- a/arch/arm/boot/dts/kirkwood-sheevaplug-common.dtsi -+++ b/arch/arm/boot/dts/kirkwood-sheevaplug-common.dtsi -@@ -78,13 +78,8 @@ - }; - - partition@100000 { -- label = "uImage"; -- reg = <0x0100000 0x400000>; -- }; -- -- partition@500000 { -- label = "root"; -- reg = <0x0500000 0x1fb00000>; -+ label = "ubi"; -+ reg = <0x0100000 0x1ff00000>; - }; - }; - ---- a/arch/arm/boot/dts/kirkwood-sheevaplug.dts -+++ b/arch/arm/boot/dts/kirkwood-sheevaplug.dts -@@ -13,6 +13,13 @@ - model = "Globalscale Technologies SheevaPlug"; - compatible = "globalscale,sheevaplug", "marvell,kirkwood-88f6281", "marvell,kirkwood"; - -+ aliases { -+ led-boot = &led_health; -+ led-failsafe = &led_health; -+ led-running = &led_health; -+ led-upgrade = &led_health; -+ }; -+ - ocp@f1000000 { - mvsdio@90000 { - pinctrl-0 = <&pmx_sdio>; -@@ -28,10 +35,10 @@ - pinctrl-0 = <&pmx_led_blue &pmx_led_red>; - pinctrl-names = "default"; - -- health { -+ led_health: health { - label = "sheevaplug:blue:health"; - gpios = <&gpio1 17 GPIO_ACTIVE_LOW>; -- default-state = "keep"; -+ default-state = "on"; - }; - - misc { diff --git a/target/linux/kirkwood/patches-5.4/113-readynas_duo_v2.patch b/target/linux/kirkwood/patches-5.4/113-readynas_duo_v2.patch deleted file mode 100644 index c6452c55a3..0000000000 --- a/target/linux/kirkwood/patches-5.4/113-readynas_duo_v2.patch +++ /dev/null @@ -1,76 +0,0 @@ ---- a/arch/arm/boot/dts/kirkwood-netgear_readynas_duo_v2.dts -+++ b/arch/arm/boot/dts/kirkwood-netgear_readynas_duo_v2.dts -@@ -19,6 +19,13 @@ - reg = <0x00000000 0x10000000>; - }; - -+ aliases { -+ led-boot = &led_power; -+ led-failsafe = &led_power; -+ led-running = &led_power; -+ led-upgrade = &led_power; -+ }; -+ - chosen { - bootargs = "console=ttyS0,115200n8 earlyprintk"; - stdout-path = &uart0; -@@ -115,7 +122,7 @@ - &pmx_led_blue_backup >; - pinctrl-names = "default"; - -- power_led { -+ led_power: power_led { - label = "status:blue:power_led"; - gpios = <&gpio0 31 GPIO_ACTIVE_LOW>; - default-state = "keep"; -@@ -129,11 +136,13 @@ - disk1_led { - label = "status:blue:disk1_led"; - gpios = <&gpio0 23 GPIO_ACTIVE_LOW>; -+ linux,default-trigger = "ata1"; - }; - - disk2_led { - label = "status:blue:disk2_led"; - gpios = <&gpio0 22 GPIO_ACTIVE_LOW>; -+ linux,default-trigger = "ata2"; - }; - - backup_led { -@@ -150,7 +159,13 @@ - - power-button { - label = "Power Button"; -- linux,code = ; -+ /* Power button and INT pin from PHY are both connected -+ * to this GPIO. Every network restart causes PHY restart -+ * and button is pressed. It's difficult to use it as -+ * KEY_POWER without changes in kernel (or netifd) so -+ * the button is configured as regular one. -+ */ -+ linux,code = ; - gpios = <&gpio1 15 GPIO_ACTIVE_LOW>; - }; - -@@ -208,18 +223,13 @@ - }; - - partition@200000 { -- label = "uImage"; -+ label = "kernel"; - reg = <0x0200000 0x600000>; - }; - - partition@800000 { -- label = "minirootfs"; -- reg = <0x0800000 0x1000000>; -- }; -- -- partition@1800000 { -- label = "jffs2"; -- reg = <0x1800000 0x6800000>; -+ label = "ubi"; -+ reg = <0x0800000 0x7800000>; - }; - }; - diff --git a/target/linux/kirkwood/patches-5.4/201-enable-sata-port-specific-led-triggers.patch b/target/linux/kirkwood/patches-5.4/201-enable-sata-port-specific-led-triggers.patch deleted file mode 100644 index c1645367a4..0000000000 --- a/target/linux/kirkwood/patches-5.4/201-enable-sata-port-specific-led-triggers.patch +++ /dev/null @@ -1,10 +0,0 @@ ---- a/arch/arm/mach-mvebu/Kconfig -+++ b/arch/arm/mach-mvebu/Kconfig -@@ -119,6 +119,7 @@ config MACH_DOVE - config MACH_KIRKWOOD - bool "Marvell Kirkwood boards" - depends on ARCH_MULTI_V5 -+ select ARCH_WANT_LIBATA_LEDS - select CPU_FEROCEON - select GPIOLIB - select KIRKWOOD_CLK diff --git a/target/linux/kirkwood/patches-5.4/202-linksys-find-active-root.patch b/target/linux/kirkwood/patches-5.4/202-linksys-find-active-root.patch deleted file mode 100644 index fe5e1e2cd0..0000000000 --- a/target/linux/kirkwood/patches-5.4/202-linksys-find-active-root.patch +++ /dev/null @@ -1,62 +0,0 @@ -The WRT1900AC among other Linksys routers uses a dual-firmware layout. -Dynamically rename the active partition to "ubi". - -Signed-off-by: Imre Kaloz ---- ---- a/drivers/mtd/parsers/ofpart_core.c -+++ b/drivers/mtd/parsers/ofpart_core.c -@@ -38,6 +38,8 @@ static bool node_has_compatible(struct d - return of_get_property(pp, "compatible", NULL); - } - -+static int mangled_rootblock; -+ - static int parse_fixed_partitions(struct mtd_info *master, - const struct mtd_partition **pparts, - struct mtd_part_parser_data *data) -@@ -47,6 +49,7 @@ static int parse_fixed_partitions(struct - struct mtd_partition *parts; - struct device_node *mtd_node; - struct device_node *ofpart_node; -+ const char *owrtpart = "ubi"; - const char *partname; - struct device_node *pp; - int nr_parts, i, ret = 0; -@@ -133,9 +136,15 @@ static int parse_fixed_partitions(struct - parts[i].size = of_read_number(reg + a_cells, s_cells); - parts[i].of_node = pp; - -- partname = of_get_property(pp, "label", &len); -- if (!partname) -- partname = of_get_property(pp, "name", &len); -+ if (mangled_rootblock && (i == mangled_rootblock)) { -+ partname = owrtpart; -+ } else { -+ partname = of_get_property(pp, "label", &len); -+ -+ if (!partname) -+ partname = of_get_property(pp, "name", &len); -+ } -+ - parts[i].name = partname; - - if (of_get_property(pp, "read-only", &len)) -@@ -249,6 +258,18 @@ static int __init ofpart_parser_init(voi - return 0; - } - -+static int __init active_root(char *str) -+{ -+ get_option(&str, &mangled_rootblock); -+ -+ if (!mangled_rootblock) -+ return 1; -+ -+ return 1; -+} -+ -+__setup("mangled_rootblock=", active_root); -+ - static void __exit ofpart_parser_exit(void) - { - deregister_mtd_parser(&ofpart_parser); diff --git a/target/linux/kirkwood/patches-5.4/203-blackarmor-nas220.patch b/target/linux/kirkwood/patches-5.4/203-blackarmor-nas220.patch deleted file mode 100644 index e04a28206a..0000000000 --- a/target/linux/kirkwood/patches-5.4/203-blackarmor-nas220.patch +++ /dev/null @@ -1,99 +0,0 @@ ---- a/arch/arm/boot/dts/kirkwood-blackarmor-nas220.dts -+++ b/arch/arm/boot/dts/kirkwood-blackarmor-nas220.dts -@@ -17,6 +17,13 @@ - compatible = "seagate,blackarmor-nas220","marvell,kirkwood-88f6192", - "marvell,kirkwood"; - -+ aliases { -+ led-boot = &led_status_amber; -+ led-failsafe = &led_status_amber; -+ led-running = &led_status_blue; -+ led-upgrade = &led_status_amber; -+ }; -+ - memory { /* 128 MB */ - device_type = "memory"; - reg = <0x00000000 0x8000000>; -@@ -36,14 +43,14 @@ - compatible = "gpio-keys"; - - reset { -- label = "Reset"; -- linux,code = ; -+ label = "Reset Button"; -+ linux,code = ; - gpios = <&gpio0 29 GPIO_ACTIVE_HIGH>; - }; - -- button { -- label = "Power"; -- linux,code = ; -+ power { -+ label = "Power Button"; -+ linux,code = ; - gpios = <&gpio0 26 GPIO_ACTIVE_LOW>; - }; - }; -@@ -51,11 +58,27 @@ - gpio-leds { - compatible = "gpio-leds"; - -- blue-power { -+ led_power_blue: power_blue { - label = "nas220:blue:power"; - gpios = <&gpio0 12 GPIO_ACTIVE_HIGH>; - linux,default-trigger = "default-on"; - }; -+ -+ disk_blue { -+ label = "nas220:blue:disk"; -+ gpios = <&gpio0 16 GPIO_ACTIVE_LOW>; -+ linux,default-trigger = "disk-activity"; -+ }; -+ -+ led_status_blue: status_blue { -+ label = "nas220:blue:status"; -+ gpios = <&gpio0 23 GPIO_ACTIVE_HIGH>; -+ }; -+ -+ led_status_amber: status_amber { -+ label = "nas220:amber:status"; -+ gpios = <&gpio0 22 GPIO_ACTIVE_HIGH>; -+ }; - }; - - regulators { -@@ -153,6 +176,33 @@ - - &nand { - status = "okay"; -+ -+ partitions { -+ compatible = "fixed-partitions"; -+ -+ partition@0 { -+ label = "uboot"; -+ reg = <0x0 0xa0000>; -+ read-only; -+ }; -+ -+ partition@a0000 { -+ label = "uboot-env"; -+ reg = <0xa0000 0x10000>; -+ read-only; -+ }; -+ -+ partition@b0000 { -+ label = "reserved"; -+ reg = <0xb0000 0x10000>; -+ read-only; -+ }; -+ -+ partition@c0000 { -+ label = "ubi"; -+ reg = <0xc0000 0x1e80000>; -+ }; -+ }; - }; - - &mdio { diff --git a/target/linux/kirkwood/patches-5.4/800-power-reset-linkstation-poweroff-prepare-for-new-dev.patch b/target/linux/kirkwood/patches-5.4/800-power-reset-linkstation-poweroff-prepare-for-new-dev.patch deleted file mode 100644 index 4b4d03839a..0000000000 --- a/target/linux/kirkwood/patches-5.4/800-power-reset-linkstation-poweroff-prepare-for-new-dev.patch +++ /dev/null @@ -1,101 +0,0 @@ -From 11cab9f5cd9390cd83747e579957c8f5b807c09c Mon Sep 17 00:00:00 2001 -From: Pawel Dembicki -Date: Fri, 18 Jun 2021 12:37:27 +0200 -Subject: [PATCH 1/2] power: reset: linkstation-poweroff: prepare for new - devices - -This commit prepare driver for another device support. - -New power_off_cfg structure describes two most important things: name of -mdio bus and pointer to register setting function. It allow to add new -device with different mdio bus node and other phy register config. - -Signed-off-by: Pawel Dembicki ---- - drivers/power/reset/linkstation-poweroff.c | 35 ++++++++++++++++++---- - 1 file changed, 29 insertions(+), 6 deletions(-) - ---- a/drivers/power/reset/linkstation-poweroff.c -+++ b/drivers/power/reset/linkstation-poweroff.c -@@ -29,11 +29,21 @@ - #define LED2_FORCE_ON (0x8 << 8) - #define LEDMASK GENMASK(11,8) - -+struct power_off_cfg { -+ char *mdio_node_name; -+ void (*phy_set_reg)(bool restart); -+}; -+ - static struct phy_device *phydev; -+static const struct power_off_cfg *cfg; - --static void mvphy_reg_intn(u16 data) -+static void linkstation_mvphy_reg_intn(bool restart) - { - int rc = 0, saved_page; -+ u16 data = 0; -+ -+ if(restart) -+ data = MII_88E1318S_PHY_LED_TCR_FORCE_INT; - - saved_page = phy_select_page(phydev, MII_MARVELL_LED_PAGE); - if (saved_page < 0) -@@ -66,11 +76,16 @@ err: - dev_err(&phydev->mdio.dev, "Write register failed, %d\n", rc); - } - -+static const struct power_off_cfg linkstation_power_off_cfg = { -+ .mdio_node_name = "mdio", -+ .phy_set_reg = linkstation_mvphy_reg_intn, -+}; -+ - static int linkstation_reboot_notifier(struct notifier_block *nb, - unsigned long action, void *unused) - { - if (action == SYS_RESTART) -- mvphy_reg_intn(MII_88E1318S_PHY_LED_TCR_FORCE_INT); -+ cfg->phy_set_reg(true); - - return NOTIFY_DONE; - } -@@ -82,14 +97,18 @@ static struct notifier_block linkstation - static void linkstation_poweroff(void) - { - unregister_reboot_notifier(&linkstation_reboot_nb); -- mvphy_reg_intn(0); -+ cfg->phy_set_reg(false); - - kernel_restart("Power off"); - } - - static const struct of_device_id ls_poweroff_of_match[] = { -- { .compatible = "buffalo,ls421d" }, -- { .compatible = "buffalo,ls421de" }, -+ { .compatible = "buffalo,ls421d", -+ .data = &linkstation_power_off_cfg, -+ }, -+ { .compatible = "buffalo,ls421de", -+ .data = &linkstation_power_off_cfg, -+ }, - { }, - }; - -@@ -97,13 +116,17 @@ static int __init linkstation_poweroff_i - { - struct mii_bus *bus; - struct device_node *dn; -+ const struct of_device_id *match; - - dn = of_find_matching_node(NULL, ls_poweroff_of_match); - if (!dn) - return -ENODEV; - of_node_put(dn); - -- dn = of_find_node_by_name(NULL, "mdio"); -+ match = of_match_node(ls_poweroff_of_match, dn); -+ cfg = match->data; -+ -+ dn = of_find_node_by_name(NULL, cfg->mdio_node_name); - if (!dn) - return -ENODEV; - diff --git a/target/linux/kirkwood/patches-5.4/801-power-reset-linkstation-poweroff-add-new-device.patch b/target/linux/kirkwood/patches-5.4/801-power-reset-linkstation-poweroff-add-new-device.patch deleted file mode 100644 index a929aacfd0..0000000000 --- a/target/linux/kirkwood/patches-5.4/801-power-reset-linkstation-poweroff-add-new-device.patch +++ /dev/null @@ -1,97 +0,0 @@ -From a2d9c86df8d12646f5bf66920e4f1e6d940cfc62 Mon Sep 17 00:00:00 2001 -From: Pawel Dembicki -Date: Fri, 18 Jun 2021 13:25:33 +0200 -Subject: [PATCH 2/2] power: reset: linkstation-poweroff: add new device - -This commit introduces support for NETGEAR ReadyNAS Duo v2. -This device use bit 4 of LED[2:0] Polarity Control Register to indicate -AC Power loss. - -For more details about AC loss detection in NETGEAR ReadyNAS Duo v2, -please look at the file: -RND_5.3.13_WW.src/u-boot/board/mv_feroceon/mv_hal/usibootup/usibootup.c -from Netgear GPL sources. - -Signed-off-by: Pawel Dembicki ---- - drivers/power/reset/linkstation-poweroff.c | 43 ++++++++++++++++++++++ - 1 file changed, 43 insertions(+) - ---- a/drivers/power/reset/linkstation-poweroff.c -+++ b/drivers/power/reset/linkstation-poweroff.c -@@ -19,6 +19,7 @@ - #define MII_MARVELL_PHY_PAGE 22 - - #define MII_PHY_LED_CTRL 16 -+#define MII_PHY_LED_POL_CTRL 17 - #define MII_88E1318S_PHY_LED_TCR 18 - #define MII_88E1318S_PHY_WOL_CTRL 16 - #define MII_M1011_IEVENT 19 -@@ -29,6 +30,8 @@ - #define LED2_FORCE_ON (0x8 << 8) - #define LEDMASK GENMASK(11,8) - -+#define MII_88E1318S_PHY_LED_POL_LED2 BIT(4) -+ - struct power_off_cfg { - char *mdio_node_name; - void (*phy_set_reg)(bool restart); -@@ -76,11 +79,48 @@ err: - dev_err(&phydev->mdio.dev, "Write register failed, %d\n", rc); - } - -+static void readynas_mvphy_set_reg(bool restart) -+{ -+ int rc = 0, saved_page; -+ u16 data = 0; -+ -+ if(restart) -+ data = MII_88E1318S_PHY_LED_POL_LED2; -+ -+ saved_page = phy_select_page(phydev, MII_MARVELL_LED_PAGE); -+ if (saved_page < 0) -+ goto err; -+ -+ /* Set the LED[2].0 Polarity bit to the required state */ -+ __phy_modify(phydev, MII_PHY_LED_POL_CTRL, -+ MII_88E1318S_PHY_LED_POL_LED2, data); -+ -+ if (!data) { -+ -+ /* If WOL was enabled and a magic packet was received before powering -+ * off, we won't be able to wake up by sending another magic packet. -+ * Clear WOL status. -+ */ -+ __phy_write(phydev, MII_MARVELL_PHY_PAGE, MII_MARVELL_WOL_PAGE); -+ __phy_set_bits(phydev, MII_88E1318S_PHY_WOL_CTRL, -+ MII_88E1318S_PHY_WOL_CTRL_CLEAR_WOL_STATUS); -+ } -+err: -+ rc = phy_restore_page(phydev, saved_page, rc); -+ if (rc < 0) -+ dev_err(&phydev->mdio.dev, "Write register failed, %d\n", rc); -+} -+ - static const struct power_off_cfg linkstation_power_off_cfg = { - .mdio_node_name = "mdio", - .phy_set_reg = linkstation_mvphy_reg_intn, - }; - -+static const struct power_off_cfg readynas_power_off_cfg = { -+ .mdio_node_name = "mdio-bus", -+ .phy_set_reg = readynas_mvphy_set_reg, -+}; -+ - static int linkstation_reboot_notifier(struct notifier_block *nb, - unsigned long action, void *unused) - { -@@ -109,6 +149,9 @@ static const struct of_device_id ls_powe - { .compatible = "buffalo,ls421de", - .data = &linkstation_power_off_cfg, - }, -+ { .compatible = "netgear,readynas-duo-v2", -+ .data = &readynas_power_off_cfg, -+ }, - { }, - }; - -- 2.30.2