From aa4d63c2daa23bd4b2ebeee8ac9c862c8f77809a Mon Sep 17 00:00:00 2001 From: Sebastian Schaper Date: Mon, 20 May 2024 23:44:30 +0200 Subject: [PATCH] ramips: add support for 7Links WLR-1240 The WLR-1240 (ZX-5434) is an AC1200 Wave 2 outdoor repeater with omnidirectional antennas for wall or pole mounting. The device is manufactured by Todaair and meant to be used with a tuya-based app, there is no webinterface for configuration. Specifications: - MT7628AN, 8 MiB SPI NOR flash, 64 MiB RAM, 2x2 802.11n - MT7613 2x2 802.11ac Wave 2 - 802.3af PoE or 12V 1A 5.5x2.1 power supply (included) - top RGB LED ring TFTP installation: - rename sysupgrade to `firmware_auto.bin` - provide at 192.168.1.10 during boot HTTP installation: - keep reset button pressed for 5 seconds during power on (light blue LED flashes slowly, then quickly to confirm, then remains steady on) - recovery web interface is at 192.168.1.1, upload sysupgrade Opening the device - use suction cup to remove top cap within LED ring - two screws are located in holes underneath silicone sealant - two further screws are located at the bottom initramfs boot - open device, connect serial console (pins are labelled) - keep pressing `4` during second tftp attempt to enter uboot shell - run `tftpboot 82000000` to avoid memory overlap, then `bootm` Signed-off-by: Sebastian Schaper --- .../ramips/dts/mt7628an_7links_wlr-1240.dts | 39 +++++++++++++++++++ target/linux/ramips/image/mt76x8.mk | 6 +++ .../mt76x8/base-files/etc/board.d/02_network | 1 + 3 files changed, 46 insertions(+) create mode 100644 target/linux/ramips/dts/mt7628an_7links_wlr-1240.dts diff --git a/target/linux/ramips/dts/mt7628an_7links_wlr-1240.dts b/target/linux/ramips/dts/mt7628an_7links_wlr-1240.dts new file mode 100644 index 0000000000..a9bf4ebc14 --- /dev/null +++ b/target/linux/ramips/dts/mt7628an_7links_wlr-1240.dts @@ -0,0 +1,39 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT + +#include "mt7628an_7links_wlr-12xx.dtsi" + +/ { + compatible = "7links,wlr-1240", "mediatek,mt7628an-soc"; + model = "7Links WLR-1240"; + + leds { + compatible = "gpio-leds"; + + led_status_red: status_red { + function = LED_FUNCTION_STATUS; + color = ; + gpios = <&gpio 11 GPIO_ACTIVE_LOW>; + }; + + led_status_blue: status_blue { + function = LED_FUNCTION_STATUS; + color = ; + gpios = <&gpio 37 GPIO_ACTIVE_LOW>; + }; + + led_status_green: status_green { + function = LED_FUNCTION_STATUS; + color = ; + gpios = <&gpio 44 GPIO_ACTIVE_LOW>; + default-state = "on"; + }; + }; + + aliases { + led-boot = &led_status_green; + led-failsafe = &led_status_red; + led-running = &led_status_blue; + led-upgrade = &led_status_red; + label-mac-device = ðernet; + }; +}; diff --git a/target/linux/ramips/image/mt76x8.mk b/target/linux/ramips/image/mt76x8.mk index aa547e81a7..07000a1a11 100644 --- a/target/linux/ramips/image/mt76x8.mk +++ b/target/linux/ramips/image/mt76x8.mk @@ -43,6 +43,12 @@ define Device/7links_wlr-1230 endef TARGET_DEVICES += 7links_wlr-1230 +define Device/7links_wlr-1240 + $(Device/7links_wlr-12xx) + DEVICE_MODEL := WLR-1240 +endef +TARGET_DEVICES += 7links_wlr-1240 + define Device/alfa-network_awusfree1 IMAGE_SIZE := 7872k DEVICE_VENDOR := ALFA Network diff --git a/target/linux/ramips/mt76x8/base-files/etc/board.d/02_network b/target/linux/ramips/mt76x8/base-files/etc/board.d/02_network index 3eca7e61e8..c44361a439 100644 --- a/target/linux/ramips/mt76x8/base-files/etc/board.d/02_network +++ b/target/linux/ramips/mt76x8/base-files/etc/board.d/02_network @@ -9,6 +9,7 @@ ramips_setup_interfaces() case $board in 7links,wlr-1230|\ + 7links,wlr-1240|\ alfa-network,awusfree1|\ d-team,pbr-d1|\ dlink,dap-1325-a1|\ -- 2.30.2