From a96382c1bb204698cd43e82193877c10e4b63027 Mon Sep 17 00:00:00 2001
From: Daniel Golle <daniel@makrotopia.org>
Date: Wed, 13 Jul 2022 04:30:32 +0100
Subject: [PATCH] mediatek: add support for Bananapi BPi-R3

The Bananapi BPi-R3 is a development router board built around the
MediaTek Filogic 830 (MT7986A) SoC.
The board can boot either from microSD, SPI-NAND, SPI-NOR or eMMC.
Only either SPI-NAND or SPI-NOR can be used at the same time, also only
either microSD or eMMC can be used. The various storage options can be
selected using small SMD switches on the board.

Specs:
 * MediaTek MT7986A (Filogic 830) 4x ARM Cortex A53
 * 4T4R 2.4G 802.11bgnax (MT7975N)
 * 4T4R 5G 802.11anac/ax (MT7975P)
 * 2 GB DDR4 RAM
 * 8 GB eMMC
 * 128 MB SPI-NAND flash
 * 32 MB SPI-NOR flash
 * on-board MT7531 GbE switch
 * 2x SFP+ (1 GbE / 2.5 GbE)
 * 5x GbE network port
 * miniPCIe slot (only USB 2.0 connected)
 * uSIM slot (connected to miniPCIe interface)
 * M.2 KEY-E PCIe interface (PCIe x2)
 * microSD card interface
 * 26 PIN GPIO

Hardware details: https://wiki.banana-pi.org/Banana_Pi_BPI-R3

Working:
 * all 4 boot methods incl. installation via U-Boot, sysupgrade, ...
 * copper LAN and WAN ports
 * SFP1 (connected to gmac1, eth1 in Linux)
 * WiFi
 * LEDs
 * Buttons
 * PSTORE/ramoops based dual-boot

Not Working (missing driver features):
 * SFP2 (connected to MT7531 switch)

Untested:
 * M.2/NGFF slot (PCIe x2)
 * mPCIe slot (USB 2.0 + SIM)

Signed-off-by: Daniel Golle <daniel@makrotopia.org>
---
 .../uci-defaults/99_fwenv-store-ethaddr.sh    |   8 +-
 .../dts/mt7986a-bananapi-bpi-r3-emmc-nor.dts  |  80 +++
 .../mt7986a-bananapi-bpi-r3-emmc-snand.dts    |  71 +++
 .../dts/mt7986a-bananapi-bpi-r3-nor.dts       |  58 ++
 .../dts/mt7986a-bananapi-bpi-r3-snand.dts     |  49 ++
 .../mediatek/dts/mt7986a-bananapi-bpi-r3.dts  | 540 ++++++++++++++++++
 .../filogic/base-files/etc/board.d/02_network |   4 +
 .../base-files/lib/upgrade/platform.sh        |  41 +-
 target/linux/mediatek/image/filogic.mk        |  71 +++
 9 files changed, 920 insertions(+), 2 deletions(-)
 create mode 100644 target/linux/mediatek/dts/mt7986a-bananapi-bpi-r3-emmc-nor.dts
 create mode 100644 target/linux/mediatek/dts/mt7986a-bananapi-bpi-r3-emmc-snand.dts
 create mode 100644 target/linux/mediatek/dts/mt7986a-bananapi-bpi-r3-nor.dts
 create mode 100644 target/linux/mediatek/dts/mt7986a-bananapi-bpi-r3-snand.dts
 create mode 100644 target/linux/mediatek/dts/mt7986a-bananapi-bpi-r3.dts

diff --git a/target/linux/mediatek/base-files/etc/uci-defaults/99_fwenv-store-ethaddr.sh b/target/linux/mediatek/base-files/etc/uci-defaults/99_fwenv-store-ethaddr.sh
index b078b8f8ce..5dec158a93 100644
--- a/target/linux/mediatek/base-files/etc/uci-defaults/99_fwenv-store-ethaddr.sh
+++ b/target/linux/mediatek/base-files/etc/uci-defaults/99_fwenv-store-ethaddr.sh
@@ -1,6 +1,6 @@
 [ ! -e /etc/fw_env.config ] && exit 0
 
-. /lib/functions.sh
+. /lib/functions/system.sh
 
 case "$(board_name)" in
 bananapi,bpi-r2|\
@@ -9,6 +9,12 @@ unielec,u7623-02)
 	[ -z "$(fw_printenv -n ethaddr 2>/dev/null)" ] &&
 		fw_setenv ethaddr "$(cat /sys/class/net/eth0/address)"
 	;;
+bananapi,bpi-r3)
+	[ -z "$(fw_printenv -n ethaddr 2>/dev/null)" ] &&
+		fw_setenv ethaddr "$(cat /sys/class/net/eth0/address)"
+	[ -z "$(fw_printenv -n eth1addr 2>/dev/null)" ] &&
+		fw_setenv eth1addr "$(macaddr_add $(cat /sys/class/net/eth0/address) 1)"
+	;;
 esac
 
 exit 0
diff --git a/target/linux/mediatek/dts/mt7986a-bananapi-bpi-r3-emmc-nor.dts b/target/linux/mediatek/dts/mt7986a-bananapi-bpi-r3-emmc-nor.dts
new file mode 100644
index 0000000000..1c82782b1f
--- /dev/null
+++ b/target/linux/mediatek/dts/mt7986a-bananapi-bpi-r3-emmc-nor.dts
@@ -0,0 +1,80 @@
+/* SPDX-License-Identifier: (GPL-2.0-only OR MIT) */
+
+/dts-v1/;
+/plugin/;
+
+/ {
+	compatible = "bananapi,bpi-r3", "mediatek,mt7986a";
+
+	fragment@0 {
+		target-path = "/soc/mmc@11230000";
+		__overlay__ {
+			pinctrl-names = "default", "state_uhs";
+			pinctrl-0 = <&mmc0_pins_default>;
+			pinctrl-1 = <&mmc0_pins_uhs>;
+			bus-width = <8>;
+			max-frequency = <200000000>;
+			/delete-property/ cap-sd-highspeed;
+			cap-mmc-highspeed;
+			mmc-hs200-1_8v;
+			mmc-hs400-1_8v;
+			hs400-ds-delay = <0x14014>;
+			vmmc-supply = <&reg_3p3v>;
+			vqmmc-supply = <&reg_1p8v>;
+			non-removable;
+			no-sd;
+			no-sdio;
+			status = "okay";
+		};
+	};
+
+	fragment@1 {
+		target-path = "/soc/spi@1100a000";
+		__overlay__ {
+			flash@0 {
+				compatible = "jedec,spi-nor";
+				reg = <0>;
+				spi-max-frequency = <10000000>;
+
+				partitions {
+					compatible = "fixed-partitions";
+					#address-cells = <1>;
+					#size-cells = <1>;
+
+					partition@0 {
+						label = "bl2";
+						reg = <0x0 0x40000>;
+						read-only;
+					};
+
+					partition@40000 {
+						label = "u-boot-env";
+						reg = <0x40000 0x40000>;
+					};
+
+					partition@80000 {
+						label = "reserved2";
+						reg = <0x80000 0x80000>;
+					};
+
+					partition@100000 {
+						label = "fip";
+						reg = <0x100000 0x80000>;
+						read-only;
+					};
+
+					partition@180000 {
+						label = "recovery";
+						reg = <0x180000 0xa80000>;
+					};
+
+					partition@c00000 {
+						label = "fit";
+						reg = <0xc00000 0x1400000>;
+						compatible = "denx,fit";
+					};
+				};
+			};
+		};
+	};
+};
diff --git a/target/linux/mediatek/dts/mt7986a-bananapi-bpi-r3-emmc-snand.dts b/target/linux/mediatek/dts/mt7986a-bananapi-bpi-r3-emmc-snand.dts
new file mode 100644
index 0000000000..2ca865d6e6
--- /dev/null
+++ b/target/linux/mediatek/dts/mt7986a-bananapi-bpi-r3-emmc-snand.dts
@@ -0,0 +1,71 @@
+/* SPDX-License-Identifier: (GPL-2.0-only OR MIT) */
+
+/dts-v1/;
+/plugin/;
+
+/ {
+	compatible = "bananapi,bpi-r3", "mediatek,mt7986a";
+
+	fragment@0 {
+		target-path = "/soc/mmc@11230000";
+		__overlay__ {
+			pinctrl-names = "default", "state_uhs";
+			pinctrl-0 = <&mmc0_pins_default>;
+			pinctrl-1 = <&mmc0_pins_uhs>;
+			bus-width = <8>;
+			max-frequency = <200000000>;
+			/delete-property/ cap-sd-highspeed;
+			cap-mmc-highspeed;
+			mmc-hs200-1_8v;
+			mmc-hs400-1_8v;
+			hs400-ds-delay = <0x14014>;
+			vmmc-supply = <&reg_3p3v>;
+			vqmmc-supply = <&reg_1p8v>;
+			non-removable;
+			no-sd;
+			no-sdio;
+			status = "okay";
+		};
+	};
+
+	fragment@1 {
+		target-path = "/soc/spi@1100a000";
+		__overlay__ {
+			flash@0 {
+				compatible = "spi-nand";
+				reg = <0>;
+				spi-max-frequency = <10000000>;
+				spi-tx-buswidth = <4>;
+				spi-rx-buswidth = <4>;
+
+				partitions {
+					compatible = "fixed-partitions";
+					#address-cells = <1>;
+					#size-cells = <1>;
+
+					partition@0 {
+						label = "bl2";
+						reg = <0x0 0x80000>;
+						read-only;
+					};
+
+					partition@80000 {
+						label = "reserved";
+						reg = <0x80000 0x300000>;
+					};
+
+					partition@380000 {
+						label = "fip";
+						reg = <0x380000 0x200000>;
+						read-only;
+					};
+
+					partition@580000 {
+						label = "ubi";
+						reg = <0x580000 0x7a80000>;
+					};
+				};
+			};
+		};
+	};
+};
diff --git a/target/linux/mediatek/dts/mt7986a-bananapi-bpi-r3-nor.dts b/target/linux/mediatek/dts/mt7986a-bananapi-bpi-r3-nor.dts
new file mode 100644
index 0000000000..f597b869ab
--- /dev/null
+++ b/target/linux/mediatek/dts/mt7986a-bananapi-bpi-r3-nor.dts
@@ -0,0 +1,58 @@
+/* SPDX-License-Identifier: (GPL-2.0-only OR MIT) */
+
+/dts-v1/;
+/plugin/;
+
+/ {
+	compatible = "bananapi,bpi-r3", "mediatek,mt7986a";
+
+	fragment@0 {
+		target-path = "/soc/spi@1100a000";
+		__overlay__ {
+			flash@0 {
+				compatible = "jedec,spi-nor";
+				reg = <0>;
+				spi-max-frequency = <10000000>;
+
+				partitions {
+					compatible = "fixed-partitions";
+					#address-cells = <1>;
+					#size-cells = <1>;
+
+					partition@0 {
+						label = "bl2";
+						reg = <0x0 0x40000>;
+						read-only;
+					};
+
+					partition@40000 {
+						label = "u-boot-env";
+						reg = <0x40000 0x40000>;
+					};
+
+					partition@80000 {
+						label = "reserved2";
+						reg = <0x80000 0x80000>;
+					};
+
+					partition@100000 {
+						label = "fip";
+						reg = <0x100000 0x80000>;
+						read-only;
+					};
+
+					partition@180000 {
+						label = "recovery";
+						reg = <0x180000 0xa80000>;
+					};
+
+					partition@c00000 {
+						label = "fit";
+						reg = <0xc00000 0x1400000>;
+						compatible = "denx,fit";
+					};
+				};
+			};
+		};
+	};
+};
diff --git a/target/linux/mediatek/dts/mt7986a-bananapi-bpi-r3-snand.dts b/target/linux/mediatek/dts/mt7986a-bananapi-bpi-r3-snand.dts
new file mode 100644
index 0000000000..e29ea2adb0
--- /dev/null
+++ b/target/linux/mediatek/dts/mt7986a-bananapi-bpi-r3-snand.dts
@@ -0,0 +1,49 @@
+/* SPDX-License-Identifier: (GPL-2.0-only OR MIT) */
+
+/dts-v1/;
+/plugin/;
+
+/ {
+	compatible = "bananapi,bpi-r3", "mediatek,mt7986a";
+
+	fragment@0 {
+		target-path = "/soc/spi@1100a000";
+		__overlay__ {
+			nand-flash@0 {
+				compatible = "spi-nand";
+				reg = <0>;
+				spi-max-frequency = <10000000>;
+				spi-tx-buswidth = <4>;
+				spi-rx-buswidth = <4>;
+
+				partitions {
+					compatible = "fixed-partitions";
+					#address-cells = <1>;
+					#size-cells = <1>;
+
+					partition@0 {
+						label = "bl2";
+						reg = <0x0 0x80000>;
+						read-only;
+					};
+
+					partition@80000 {
+						label = "reserved";
+						reg = <0x80000 0x300000>;
+					};
+
+					partition@380000 {
+						label = "fip";
+						reg = <0x380000 0x200000>;
+						read-only;
+					};
+
+					partition@580000 {
+						label = "ubi";
+						reg = <0x580000 0x7a80000>;
+					};
+				};
+			};
+		};
+	};
+};
diff --git a/target/linux/mediatek/dts/mt7986a-bananapi-bpi-r3.dts b/target/linux/mediatek/dts/mt7986a-bananapi-bpi-r3.dts
new file mode 100644
index 0000000000..2d9b0ac3b1
--- /dev/null
+++ b/target/linux/mediatek/dts/mt7986a-bananapi-bpi-r3.dts
@@ -0,0 +1,540 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/*
+ * Copyright (C) 2021 MediaTek Inc.
+ * Author: Sam.Shih <sam.shih@mediatek.com>
+ */
+
+/dts-v1/;
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/gpio/gpio.h>
+
+#include "mt7986a.dtsi"
+
+/ {
+	model = "Bananapi BPI-R3";
+	compatible = "bananapi,bpi-r3", "mediatek,mt7986a";
+
+	aliases {
+		serial0 = &uart0;
+		ethernet0 = &gmac0;
+		ethernet1 = &gmac1;
+		led-boot = &led_status_green;
+		led-failsafe = &led_status_green;
+		led-running = &led_status_green;
+		led-upgrade = &led_status_blue;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	memory@40000000 {
+		device_type = "memory";
+		reg = <0 0x40000000 0 0x40000000>;
+	};
+
+	reg_1p8v: regulator-1p8v {
+		compatible = "regulator-fixed";
+		regulator-name = "fixed-1.8V";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		regulator-boot-on;
+		regulator-always-on;
+	};
+
+	reg_3p3v: regulator-3p3v {
+		compatible = "regulator-fixed";
+		regulator-name = "fixed-3.3V";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-boot-on;
+		regulator-always-on;
+	};
+
+	reg_5v: regulator-5v {
+		compatible = "regulator-fixed";
+		regulator-name = "fixed-5V";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-boot-on;
+		regulator-always-on;
+	};
+
+	keys {
+		compatible = "gpio-keys";
+
+		factory {
+			label = "reset";
+			linux,code = <KEY_RESTART>;
+			gpios = <&pio 9 GPIO_ACTIVE_LOW>;
+		};
+
+		wps {
+			label = "wps";
+			linux,code = <KEY_WPS_BUTTON>;
+			gpios = <&pio 10 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		led_status_green: green {
+			label = "green:status";
+			gpios = <&pio 69 GPIO_ACTIVE_HIGH>;
+			default-state = "on";
+		};
+
+		led_status_blue: blue {
+			label = "blue:status";
+			gpios = <&pio 86 GPIO_ACTIVE_HIGH>;
+		};
+	};
+
+	/* SFP1 cage (WAN) */
+	i2c_sfp1: i2c-gpio-0 {
+		compatible = "i2c-gpio";
+		sda-gpios = <&pio 16 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+		scl-gpios = <&pio 17 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+		i2c-gpio,delay-us = <2>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+	};
+
+	sfp1: sfp1 {
+		compatible = "sff,sfp";
+		i2c-bus = <&i2c_sfp1>;
+		los-gpios = <&pio 46 GPIO_ACTIVE_HIGH>;
+		mod-def0-gpios = <&pio 49 GPIO_ACTIVE_LOW>;
+		tx-disable-gpios = <&pio 20 GPIO_ACTIVE_HIGH>;
+		tx-fault-gpios = <&pio 7 GPIO_ACTIVE_HIGH>;
+	};
+
+	/* SFP2 cage (LAN) */
+	i2c_sfp2: i2c-gpio-1 {
+		compatible = "i2c-gpio";
+		sda-gpios = <&pio 18 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+		scl-gpios = <&pio 19 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+		i2c-gpio,delay-us = <2>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+	};
+
+	sfp2: sfp2 {
+		compatible = "sff,sfp";
+		i2c-bus = <&i2c_sfp2>;
+		los-gpios = <&pio 31 GPIO_ACTIVE_HIGH>;
+		mod-def0-gpios = <&pio 47 GPIO_ACTIVE_LOW>;
+		tx-disable-gpios = <&pio 15 GPIO_ACTIVE_HIGH>;
+		tx-fault-gpios = <&pio 48 GPIO_ACTIVE_HIGH>;
+	};
+};
+
+&eth {
+	status = "okay";
+
+	gmac0: mac@0 {
+		compatible = "mediatek,eth-mac";
+		reg = <0>;
+		phy-mode = "2500base-x";
+
+		fixed-link {
+			speed = <2500>;
+			full-duplex;
+			pause;
+		};
+	};
+
+	gmac1: mac@1 {
+		compatible = "mediatek,eth-mac";
+		reg = <1>;
+		phy-mode = "2500base-x";
+		sfp = <&sfp1>;
+		managed = "in-band-status";
+	};
+
+	mdio: mdio-bus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+	};
+};
+
+&mdio {
+	switch: switch@0 {
+		compatible = "mediatek,mt7531";
+		reg = <31>;
+		reset-gpios = <&pio 5 GPIO_ACTIVE_LOW>;
+		interrupt-controller;
+		#interrupt-cells = <1>;
+		interrupt-parent = <&pio>;
+		interrupts = <66 IRQ_TYPE_LEVEL_HIGH>;
+	};
+};
+
+&switch {
+	ports {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		port@0 {
+			reg = <0>;
+			label = "wan";
+		};
+
+		port@1 {
+			reg = <1>;
+			label = "lan1";
+		};
+
+		port@2 {
+			reg = <2>;
+			label = "lan2";
+		};
+
+		port@3 {
+			reg = <3>;
+			label = "lan3";
+		};
+
+		port@4 {
+			reg = <4>;
+			label = "lan4";
+		};
+
+		port5: port@5 {
+			reg = <5>;
+			label = "sfp2";
+			phy-mode = "2500base-x";
+			sfp = <&sfp2>;
+			managed = "in-band-status";
+		};
+
+		port@6 {
+			reg = <6>;
+			label = "cpu";
+			ethernet = <&gmac0>;
+			phy-mode = "2500base-x";
+
+			fixed-link {
+				speed = <2500>;
+				full-duplex;
+				pause;
+			};
+		};
+	};
+};
+
+&crypto {
+	status = "okay";
+};
+
+&mmc0 {
+	//sdcard
+	pinctrl-names = "default", "state_uhs";
+	pinctrl-0 = <&mmc0_pins_default>;
+	pinctrl-1 = <&mmc0_pins_uhs>;
+	bus-width = <4>;
+	max-frequency = <52000000>;
+	cap-sd-highspeed;
+	vmmc-supply = <&reg_3p3v>;
+	vqmmc-supply = <&reg_1p8v>;
+	status = "okay";
+};
+
+&pcie {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pcie_pins>;
+	status = "okay";
+};
+
+&pcie_phy {
+	status = "okay";
+};
+
+&wmac {
+	status = "okay";
+	pinctrl-names = "default", "dbdc";
+	pinctrl-0 = <&wf_2g_5g_pins>, <&wf_led_pins>;
+	pinctrl-1 = <&wf_dbdc_pins>, <&wf_led_pins>;
+};
+
+&pio {
+	/* don't mess around with GPIO 419, 450, 451, 498, 510 in sysfs system will freeze. */
+	mmc0_pins_default: mmc0-pins {
+		mux {
+			function = "emmc";
+			groups = "emmc_51";
+		};
+		conf-cmd-dat {
+			pins = "EMMC_DATA_0", "EMMC_DATA_1", "EMMC_DATA_2",
+			       "EMMC_DATA_3", "EMMC_DATA_4", "EMMC_DATA_5",
+			       "EMMC_DATA_6", "EMMC_DATA_7", "EMMC_CMD";
+			input-enable;
+			drive-strength = <4>;
+			mediatek,pull-up-adv = <1>;	/* pull-up 10K */
+		};
+		conf-clk {
+			pins = "EMMC_CK";
+			drive-strength = <6>;
+			mediatek,pull-down-adv = <2>;	/* pull-down 50K */
+		};
+		conf-ds {
+			pins = "EMMC_DSL";
+			mediatek,pull-down-adv = <2>;	/* pull-down 50K */
+		};
+		conf-rst {
+			pins = "EMMC_RSTB";
+			drive-strength = <4>;
+			mediatek,pull-up-adv = <1>;	/* pull-up 10K */
+		};
+	};
+
+	mmc0_pins_uhs: mmc0-uhs-pins {
+		mux {
+			function = "emmc";
+			groups = "emmc_51";
+		};
+		conf-cmd-dat {
+			pins = "EMMC_DATA_0", "EMMC_DATA_1", "EMMC_DATA_2",
+			       "EMMC_DATA_3", "EMMC_DATA_4", "EMMC_DATA_5",
+			       "EMMC_DATA_6", "EMMC_DATA_7", "EMMC_CMD";
+			input-enable;
+			drive-strength = <4>;
+			mediatek,pull-up-adv = <1>;	/* pull-up 10K */
+		};
+		conf-clk {
+			pins = "EMMC_CK";
+			drive-strength = <6>;
+			mediatek,pull-down-adv = <2>;	/* pull-down 50K */
+		};
+		conf-ds {
+			pins = "EMMC_DSL";
+			mediatek,pull-down-adv = <2>;	/* pull-down 50K */
+		};
+		conf-rst {
+			pins = "EMMC_RSTB";
+			drive-strength = <4>;
+			mediatek,pull-up-adv = <1>;	/* pull-up 10K */
+		};
+	};
+
+	pcie_pins: pcie-pins {
+		mux {
+			function = "pcie";
+			groups = "pcie_clk", "pcie_pereset"; //"pcie_wake" is unused
+		};
+	};
+
+	spi_flash_pins: spi-flash-pins {
+		mux {
+			function = "spi";
+			groups = "spi0", "spi0_wp_hold";
+		};
+	};
+
+	uart1_pins: uart1-pins {
+		mux {
+			function = "uart";
+			groups = "uart1";
+		};
+	};
+
+	wf_led_pins: wf-led-pins {
+		mux {
+			function = "led";
+			groups = "wifi_led";
+		};
+	};
+
+	wf_2g_5g_pins: wf-2g-5g-pins {
+		mux {
+			function = "wifi";
+			groups = "wf_2g", "wf_5g";
+		};
+		conf {
+			pins = "WF0_HB1", "WF0_HB2", "WF0_HB3", "WF0_HB4",
+			       "WF0_HB0", "WF0_HB0_B", "WF0_HB5", "WF0_HB6",
+			       "WF0_HB7", "WF0_HB8", "WF0_HB9", "WF0_HB10",
+			       "WF0_TOP_CLK", "WF0_TOP_DATA", "WF1_HB1",
+			       "WF1_HB2", "WF1_HB3", "WF1_HB4", "WF1_HB0",
+			       "WF1_HB5", "WF1_HB6", "WF1_HB7", "WF1_HB8",
+			       "WF1_TOP_CLK", "WF1_TOP_DATA";
+			drive-strength = <4>;
+		};
+	};
+
+	wf_dbdc_pins: wf-dbdc-pins {
+		mux {
+			function = "wifi";
+			groups = "wf_dbdc";
+		};
+		conf {
+			pins = "WF0_HB1", "WF0_HB2", "WF0_HB3", "WF0_HB4",
+			       "WF0_HB0", "WF0_HB0_B", "WF0_HB5", "WF0_HB6",
+			       "WF0_HB7", "WF0_HB8", "WF0_HB9", "WF0_HB10",
+			       "WF0_TOP_CLK", "WF0_TOP_DATA", "WF1_HB1",
+			       "WF1_HB2", "WF1_HB3", "WF1_HB4", "WF1_HB0",
+			       "WF1_HB5", "WF1_HB6", "WF1_HB7", "WF1_HB8",
+			       "WF1_TOP_CLK", "WF1_TOP_DATA";
+			drive-strength = <4>;
+		};
+	};
+};
+
+&spi0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&spi_flash_pins>;
+
+	status = "okay";
+};
+
+&ssusb {
+	vusb33-supply = <&reg_3p3v>;
+	vbus-supply = <&reg_5v>;
+	status = "okay";
+};
+
+&uart0 {
+	status = "okay";
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart1_pins>;
+	status = "okay";
+};
+
+&usb_phy {
+	status = "okay";
+};
+
+&wmac {
+	mediatek,eeprom-data = <0x86790900 0xc4326 0x60000000 0x00 0x00 0x00 0x00 0x00
+				0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
+				0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x1000000
+				0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
+				0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
+				0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
+				0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
+				0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
+				0x00 0x800 0x00 0x00 0x00 0x00 0x00 0x00
+				0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
+				0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
+				0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
+				0x00 0x00 0x00 0x00 0x24649090 0x280000 0x5100000 0x00
+				0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
+				0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
+				0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
+				0x21e00 0x21e0002 0x1e00021e 0x22800 0x2280002 0x28000228 0x00 0x00
+				0x00 0x00 0x00 0x00 0x00 0x00 0x8080 0x8080fdf7
+				0x903150d 0x80808080 0x80808080 0x5050d0d 0x1313c6c6 0xc3c3c200 0xc200c2 0x8182
+				0x8585c2c2 0x82828282 0x858500c2 0xc2000081 0x82858587 0x87c2c200 0x81818285 0x858787c2
+				0xc2000081 0x82858587 0x87c2c200 0x818285 0x858787c2 0xc2000081 0x82858587 0x87c4c4c2
+				0xc100c300 0xc3c3c100 0x818383c3 0xc3c3c100 0x81838300 0xc2c2c2c0 0x81828484 0xc3
+				0xc3c3c100 0x81838386 0x86c3c3c3 0xc1008183 0x838686c2 0xc2c2c081 0x82848486 0x86c3c3c3
+				0xc1008183 0x838686c3 0xc3c3c100 0x81838386 0x86c3c3c3 0xc1008183 0x83868622 0x28002228
+				0x222800 0x22280000 0xdddddddd 0xdddddddd 0xddbbbbbb 0xccccccdd 0xdddddddd 0xdddddddd
+				0xeeeeeecc 0xccccdddd 0xdddddddd 0x4a5662 0x4a 0x56620000 0x4a5662 0x4a
+				0x56620000 0x88888888 0x33333326 0x26262626 0x26262600 0x33333326 0x26262626 0x26262600
+				0x33333326 0x26262626 0x26262600 0x33333326 0x26262626 0x26262600 0x00 0xf0f0cc00
+				0x00 0xaaaa 0xaabbbbbb 0xcccccccc 0xccccbbbb 0xbbbbbbbb 0xbbbbbbaa 0xaaaabbbb
+				0xbbaaaaaa 0x999999aa 0xaaaabbbb 0xbbcccccc 0x00 0xaaaa 0xaa000000 0xbbbbbbbb
+				0xbbbbaaaa 0xaa999999 0xaaaaaaaa 0xaaaaaaaa 0xaaaaaaaa 0xaaaaaaaa 0xaaaabbbb 0xbbbbbbbb
+				0x00 0x00 0x00 0x99999999 0x9999aaaa 0xaaaaaaaa 0x999999aa 0xaaaaaaaa
+				0xaaaaaaaa 0xaaaaaaaa 0xaaaabbbb 0xbbbbbbbb 0x00 0xeeee 0xeeffffff 0xcccccccc
+				0xccccdddd 0xddbbbbbb 0xccccccbb 0xbbbbbbbb 0xbbbbbbbb 0xbbbbbbbb 0xbbbbcccc 0xccdddddd
+				0x516200 0x686e0051 0x6200686e 0x516200 0x686e0051 0x6200686e 0x516200 0x686e0051
+				0x6200686e 0x516200 0x686e0051 0x6200686e 0x516200 0x686e0051 0x6200686e 0x516200
+				0x686e0051 0x6200686e 0x516200 0x686e0051 0x6200686e 0x516200 0x686e0051 0x6200686e
+				0x516200 0x686e0051 0x6200686e 0x516200 0x686e0051 0x6200686e 0x516200 0x686e0051
+				0x6200686e 0x516200 0x686e0051 0x6200686e 0x516200 0x686e0051 0x6200686e 0x516200
+				0x686e0051 0x6200686e 0x516200 0x686e0051 0x6200686e 0x516200 0x686e0051 0x6200686e
+				0x88888888 0x88888888 0x88888888 0x88888888 0x88888888 0x88888888 0x88888888 0x88888888
+				0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
+				0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
+				0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
+				0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
+				0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
+				0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
+				0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
+				0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
+				0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
+				0x00 0x00 0x00 0x00 0x01 0x6000100 0x1050002 0xff0300
+				0xf900fe03 0x00 0x00 0x9b 0x6e370000 0x00 0xfc0009 0xa00fe00
+				0x60700fe 0x70800 0x5000b0a 0x00 0x00 0xe2 0x96460000 0x00
+				0x400f7 0xf8000300 0xfcfe0003 0xfbfc00 0xee00e3f2 0x00 0x00 0x11
+				0xbb550000 0x00 0x600f6 0xfc000300 0xfbfe0004 0xfafe00 0xf600ecf2 0x00
+				0x00 0x1f 0xbf580000 0x00 0x600f5 0xf6000400 0xf8f90004 0xf7f800
+				0xf700f0f4 0x00 0x00 0x24 0xbe570000 0x00 0x800f8 0xfe000600
+				0xf8fd0007 0xf9fe00 0xf500f0f4 0x00 0x00 0x2d 0xd6610000 0x00
+				0x400f7 0xfc000500 0xf7fc0005 0xf7fc00 0xf900f5f8 0x00 0x00 0x26
+				0xd96e0000 0x00 0x400f7 0xf9000600 0xf5f70005 0xf5f800 0xf900f4f7 0x00
+				0x00 0x1b 0xce690000 0x00 0x300f8 0xf8000600 0xf6f60004 0xf6f700
+				0xf900f4f7 0x00 0x00 0x18 0xd8720000 0x00 0x00 0x2404002
+				0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
+				0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
+				0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
+				0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
+				0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
+				0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
+				0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
+				0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
+				0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
+				0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
+				0xc1c2c1c2 0x41c341c3 0x3fc13fc1 0x40c13fc2 0x3fc240c1 0x41c040c0 0x3fc23fc2 0x40c13fc2
+				0x3fc140c0 0x41c040c0 0x3fc33fc3 0x40c23fc2 0x3fc240c1 0x41c040c0 0x3fc23fc2 0x40c23fc2
+				0x3fc140c1 0x41c040c0 0x00 0x00 0x41c741c7 0xc1c7c1c7 0x00 0x00
+				0x3fc03fc0 0x3fc03fc0 0x3fc03fc0 0x3fc03fc0 0x3fc03fc0 0x3fc03fc0 0x3fc03fc0 0x3fc03fc0
+				0x3fc03fc0 0x3fc03fc0 0x3fc03fc0 0x3fc03fc0 0x3fc03fc0 0x3fc03fc0 0x3fc03fc0 0x3fc03fc0
+				0xa0ce00 0x00 0xb6840000 0x00 0x00 0x00 0x18181818 0x18181818
+				0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
+				0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
+				0x4b5763 0x4b 0x57630000 0x4b5763 0x4b 0x57630000 0x88888888 0x8474759
+				0x69780849 0x49596d7a 0x849495a 0x6d790848 0x48596c78 0x8484858 0x6a780848 0x48586a78
+				0x8484858 0x6c78084a 0x4a5b6d79 0x8474759 0x697a0848 0x48596b79 0x8484859 0x6c7a0848
+				0x48586c79 0x8484857 0x68770848 0x48576877 0x8484857 0x6a77084a 0x4a5a6a77 0x8464659
+				0x69790848 0x48586b79 0x8484858 0x6c7a0848 0x48596c79 0x8484857 0x68770848 0x48576877
+				0x8494958 0x6d7a084b 0x4b5c6c77 0x847475a 0x6a7b0849 0x495a6e7c 0x849495a 0x6e7c0849
+				0x495b6e7c 0x8494959 0x6a7a0849 0x49596a7a 0x84a4a5a 0x6f7d084b 0x4b5c6e7b 0x00
+				0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x85848484
+				0xc3c4c4c5 0xc4c3c33f 0xc3c3c2c2 0xc2c2c03f 0xc3c3c3c4 0xc4c4c33f 0xc2c2c2c2 0xc1c3c1c1
+				0xc0c08282 0x83848686 0x88880000 0x00 0x00 0x00 0x00 0x00
+				0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
+				0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
+				0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
+				0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
+				0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
+				0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
+				0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
+				0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
+				0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
+				0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
+				0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
+				0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
+				0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
+				0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
+				0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
+				0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
+				0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
+				0x00 0x00 0x00 0x00 0x00 0x00 0x1111 0x00
+				0x8080f703 0x10808080 0x80050d13 0x00 0x00 0x00 0x00 0x00
+				0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
+				0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
+				0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
+				0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
+				0x00 0x00 0x00 0xa4 0xce000000 0xb684 0x00 0x00
+				0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
+				0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
+				0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
+				0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
+				0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
+				0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
+				0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
+				0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
+				0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
+				0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
+				0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
+				0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
+				0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
+				0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00>;
+};
diff --git a/target/linux/mediatek/filogic/base-files/etc/board.d/02_network b/target/linux/mediatek/filogic/base-files/etc/board.d/02_network
index 9168e4d399..13afc2a3dc 100644
--- a/target/linux/mediatek/filogic/base-files/etc/board.d/02_network
+++ b/target/linux/mediatek/filogic/base-files/etc/board.d/02_network
@@ -12,6 +12,10 @@ mediatek_setup_interfaces()
 	mediatek,mt7986b-rfb)
 		ucidef_set_interfaces_lan_wan "lan1 lan2 lan3 lan4" wan
 		;;
+	bananapi,bpi-r3)
+		ucidef_set_interfaces_lan_wan "lan1 lan2 lan3 lan4 sfp2" "eth1 wan"
+		ucidef_set_interface_macaddr "wan" "$(macaddr_add $(cat /sys/class/net/eth0/address) 1)"
+		;;
 	*)
 		ucidef_set_interfaces_lan_wan "lan1 lan2 lan3 lan4" wan
 		;;
diff --git a/target/linux/mediatek/filogic/base-files/lib/upgrade/platform.sh b/target/linux/mediatek/filogic/base-files/lib/upgrade/platform.sh
index bdb3309faa..13b5b64fb6 100755
--- a/target/linux/mediatek/filogic/base-files/lib/upgrade/platform.sh
+++ b/target/linux/mediatek/filogic/base-files/lib/upgrade/platform.sh
@@ -5,8 +5,26 @@ platform_do_upgrade() {
 	local file_type=$(identify $1)
 
 	case "$board" in
+	bananapi,bpi-r3)
+		export_bootdevice
+		export_partdevice rootdev 0
+		case "$rootdev" in
+		mmc*)
+			CI_ROOTDEV="$rootdev"
+			CI_KERNPART="production"
+			emmc_do_upgrade "$1"
+			;;
+		mtdblock*)
+			PART_NAME="fit"
+			default_do_upgrade "$1"
+			;;
+		ubiblock*)
+			CI_KERNPART="fit"
+			nand_do_upgrade "$1"
+			;;
+		esac
+		;;
 	*)
-		nand_do_upgrade "$1"
 		;;
 	esac
 }
@@ -20,6 +38,13 @@ platform_check_image() {
 	[ "$#" -gt 1 ] && return 1
 
 	case "$board" in
+	bananapi,bpi-r3)
+		[ "$magic" != "d00dfeed" ] && {
+			echo "Invalid image type."
+			return 1
+		}
+		return 0
+		;;
 	*)
 		nand_do_platform_check "$board" "$1"
 		return 0
@@ -28,3 +53,17 @@ platform_check_image() {
 
 	return 0
 }
+
+platform_copy_config() {
+	case "$(board_name)" in
+	bananapi,bpi-r3)
+		export_bootdevice
+		export_partdevice rootdev 0
+		case "$rootdev" in
+		mmc*)
+			emmc_copy_config
+			;;
+		esac
+		;;
+	esac
+}
diff --git a/target/linux/mediatek/image/filogic.mk b/target/linux/mediatek/image/filogic.mk
index dfa7f092cf..dfc71bbb14 100644
--- a/target/linux/mediatek/image/filogic.mk
+++ b/target/linux/mediatek/image/filogic.mk
@@ -8,6 +8,77 @@ define Image/Prepare
 	echo -ne '\xde\xad\xc0\xde' > $(KDIR)/ubi_mark
 endef
 
+define Build/bl2
+	cat $(STAGING_DIR_IMAGE)/mt7986-$1-bl2.img >> $@
+endef
+
+define Build/bl31-uboot
+	cat $(STAGING_DIR_IMAGE)/mt7986_$1-u-boot.fip >> $@
+endef
+
+define Build/mt7986-gpt
+	cp $@ $@.tmp 2>/dev/null || true
+	ptgen -g -o $@.tmp -a 1 -l 1024 \
+		$(if $(findstring sdmmc,$1), \
+			-H \
+			-t 0x83	-N bl2		-r	-p 4079k@17k \
+		) \
+			-t 0x83	-N ubootenv	-r	-p 512k@4M \
+			-t 0x83	-N factory	-r	-p 2M@4608k \
+			-t 0xef	-N fip		-r	-p 4M@6656k \
+				-N recovery	-r	-p 32M@12M \
+		$(if $(findstring sdmmc,$1), \
+				-N install	-r	-p 20M@44M \
+			-t 0x2e -N production		-p $(CONFIG_TARGET_ROOTFS_PARTSIZE)M@64M \
+		) \
+		$(if $(findstring emmc,$1), \
+			-t 0x2e -N production		-p $(CONFIG_TARGET_ROOTFS_PARTSIZE)M@64M \
+		)
+	cat $@.tmp >> $@
+	rm $@.tmp
+endef
+
+define Device/bananapi_bpi-r3
+  DEVICE_VENDOR := Bananapi
+  DEVICE_MODEL := BPi-R3
+  DEVICE_DTS := mt7986a-bananapi-bpi-r3
+  DEVICE_DTS_CONFIG := config-mt7986a-bananapi-bpi-r3
+  DEVICE_DTS_OVERLAY:= mt7986a-bananapi-bpi-r3-nor mt7986a-bananapi-bpi-r3-emmc-nor mt7986a-bananapi-bpi-r3-emmc-snand mt7986a-bananapi-bpi-r3-snand
+  DEVICE_DTS_DIR := ../dts
+  DEVICE_PACKAGES := kmod-btmtkuart kmod-usb3 kmod-i2c-gpio kmod-sfp e2fsprogs f2fsck mkf2fs
+  IMAGES := sysupgrade.itb
+  KERNEL_INITRAMFS_SUFFIX := -recovery.itb
+  ARTIFACTS := \
+	       emmc-preloader.bin emmc-bl31-uboot.fip \
+	       nor-preloader.bin nor-bl31-uboot.fip \
+	       sdcard.img.gz \
+	       snand-preloader.bin snand-bl31-uboot.fip
+  ARTIFACT/emmc-preloader.bin	:= bl2 emmc-ddr4
+  ARTIFACT/emmc-bl31-uboot.fip	:= bl31-uboot bananapi_bpi-r3-emmc
+  ARTIFACT/nor-preloader.bin	:= bl2 nor-ddr4
+  ARTIFACT/nor-bl31-uboot.fip	:= bl31-uboot bananapi_bpi-r3-nor
+  ARTIFACT/snand-preloader.bin	:= bl2 spim-nand-ddr4
+  ARTIFACT/snand-bl31-uboot.fip	:= bl31-uboot bananapi_bpi-r3-snand
+  ARTIFACT/sdcard.img.gz	:= mt7986-gpt sdmmc |\
+				   pad-to 17k | bl2 sdmmc-ddr4 |\
+				   pad-to 6656k | bl31-uboot bananapi_bpi-r3-sdmmc |\
+				   pad-to 12M | append-image-stage initramfs-recovery.itb |\
+				   pad-to 44M | bl2 spim-nand-ddr4 |\
+				   pad-to 45M | bl31-uboot bananapi_bpi-r3-snand |\
+				   pad-to 49M | bl2 nor-ddr4 |\
+				   pad-to 50M | bl31-uboot bananapi_bpi-r3-nor |\
+				   pad-to 51M | bl2 emmc-ddr4 |\
+				   pad-to 52M | bl31-uboot bananapi_bpi-r3-emmc |\
+				   pad-to 56M | mt7986-gpt emmc |\
+				   pad-to 64M | append-image squashfs-sysupgrade.itb | gzip
+  KERNEL			:= kernel-bin | gzip
+  KERNEL_INITRAMFS := kernel-bin | lzma | \
+	fit lzma $$(KDIR)/image-$$(firstword $$(DEVICE_DTS)).dtb with-initrd | pad-to 64k
+  IMAGE/sysupgrade.itb := append-kernel | fit gzip $$(KDIR)/image-$$(firstword $$(DEVICE_DTS)).dtb external-static-with-rootfs | pad-rootfs | append-metadata
+  DTC_FLAGS += -@ --space 32768
+endef
+TARGET_DEVICES += bananapi_bpi-r3
+
 define Device/mediatek_mt7986a-rfb
   DEVICE_VENDOR := MediaTek
   DEVICE_MODEL := MTK7986 rfba AP
-- 
2.30.2