From a94a20373ba0c817ddb03da0bf15af6c8d6a09ff Mon Sep 17 00:00:00 2001 From: Shiji Yang Date: Mon, 1 Mar 2021 14:35:12 +0800 Subject: [PATCH] ramips: improve GPIO pin control for HC5x61 HC5661 does not have USB port, remove usb power control pin. HC5x61 do not have LAN LEDs, remove ethernet LED control pin. Only HC5861 has PA in 2.4G channel. Signed-off-by: Shiji Yang --- .../ramips/dts/mt7620a_hiwifi_hc5761.dts | 11 ++++++++++ .../ramips/dts/mt7620a_hiwifi_hc5861.dts | 5 +++++ .../ramips/dts/mt7620a_hiwifi_hc5x61.dtsi | 22 ------------------- 3 files changed, 16 insertions(+), 22 deletions(-) diff --git a/target/linux/ramips/dts/mt7620a_hiwifi_hc5761.dts b/target/linux/ramips/dts/mt7620a_hiwifi_hc5761.dts index 5b677799841..d1a7f69e176 100644 --- a/target/linux/ramips/dts/mt7620a_hiwifi_hc5761.dts +++ b/target/linux/ramips/dts/mt7620a_hiwifi_hc5761.dts @@ -36,6 +36,17 @@ linux,default-trigger = "phy0tpt"; }; }; + + gpio_export { + compatible = "gpio-export"; + #size-cells = <0>; + + usbpower { + gpio-export,name = "usbpower"; + gpio-export,output = <1>; + gpios = <&gpio0 13 GPIO_ACTIVE_HIGH>; + }; + }; }; &ehci { diff --git a/target/linux/ramips/dts/mt7620a_hiwifi_hc5861.dts b/target/linux/ramips/dts/mt7620a_hiwifi_hc5861.dts index 08163e56ba8..d77df2158c7 100644 --- a/target/linux/ramips/dts/mt7620a_hiwifi_hc5861.dts +++ b/target/linux/ramips/dts/mt7620a_hiwifi_hc5861.dts @@ -104,3 +104,8 @@ ieee80211-freq-limit = <5000000 6000000>; }; }; + +&wmac { + pinctrl-names = "default"; + pinctrl-0 = <&pa_pins>; +}; diff --git a/target/linux/ramips/dts/mt7620a_hiwifi_hc5x61.dtsi b/target/linux/ramips/dts/mt7620a_hiwifi_hc5x61.dtsi index 8d5d8e95eee..369e4073192 100644 --- a/target/linux/ramips/dts/mt7620a_hiwifi_hc5x61.dtsi +++ b/target/linux/ramips/dts/mt7620a_hiwifi_hc5x61.dtsi @@ -19,23 +19,6 @@ linux,code = ; }; }; - - gpio_export { - compatible = "gpio-export"; - #size-cells = <0>; - - usbpower { - gpio-export,name = "usbpower"; - gpio-export,output = <1>; - gpios = <&gpio0 13 GPIO_ACTIVE_HIGH>; - }; - }; -}; - -&sysc { - ralink,gpiomux = "i2c", "jtag"; - ralink,uartmux = "gpio"; - ralink,wdtmux = <1>; }; &gpio3 { @@ -101,9 +84,6 @@ }; ðernet { - pinctrl-names = "default"; - pinctrl-0 = <&ephy_pins>; - mtd-mac-address = <&factory 0x4>; mediatek,portmap = "wllll"; @@ -115,8 +95,6 @@ &wmac { ralink,mtd-eeprom = <&factory 0x0>; - pinctrl-names = "default"; - pinctrl-0 = <&pa_pins>; }; &state_default { -- 2.30.2