From a93f7fe134543649cf2e2d8fc2c50a8f4d742915 Mon Sep 17 00:00:00 2001 From: Jian Shen Date: Mon, 22 Apr 2019 21:52:23 +0800 Subject: [PATCH] net: phy: marvell: add new default led configure for m88e151x The default m88e151x LED configuration is 0x1177, used LED[0] for 1000M link, LED[1] for 100M link, and LED[2] for active. But for some boards, which use LED[0] for link, and LED[1] for active, prefer to be 0x1040. To be compatible with this case, this patch defines a new dev_flag, and set it before connect phy in HNS3 driver. When phy initializing, using the new LED configuration if this dev_flag is set. Signed-off-by: Jian Shen Signed-off-by: Huazhong Tan Signed-off-by: David S. Miller --- drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_mdio.c | 3 +++ drivers/net/phy/marvell.c | 6 +++++- include/linux/marvell_phy.h | 1 + 3 files changed, 9 insertions(+), 1 deletion(-) diff --git a/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_mdio.c b/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_mdio.c index 12be4e293fcf..1e8134892d77 100644 --- a/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_mdio.c +++ b/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_mdio.c @@ -3,6 +3,7 @@ #include #include +#include #include "hclge_cmd.h" #include "hclge_main.h" @@ -209,6 +210,8 @@ int hclge_mac_connect_phy(struct hnae3_handle *handle) linkmode_clear_bit(ETHTOOL_LINK_MODE_FIBRE_BIT, phydev->supported); + phydev->dev_flags |= MARVELL_PHY_LED0_LINK_LED1_ACTIVE; + ret = phy_connect_direct(netdev, phydev, hclge_mac_adjust_link, PHY_INTERFACE_MODE_SGMII); diff --git a/drivers/net/phy/marvell.c b/drivers/net/phy/marvell.c index 8754cb883d02..a7e8c8113d97 100644 --- a/drivers/net/phy/marvell.c +++ b/drivers/net/phy/marvell.c @@ -137,6 +137,7 @@ #define MII_PHY_LED_CTRL 16 #define MII_88E1121_PHY_LED_DEF 0x0030 #define MII_88E1510_PHY_LED_DEF 0x1177 +#define MII_88E1510_PHY_LED0_LINK_LED1_ACTIVE 0x1040 #define MII_M1011_PHY_STATUS 0x11 #define MII_M1011_PHY_STATUS_1000 0x8000 @@ -633,7 +634,10 @@ static void marvell_config_led(struct phy_device *phydev) * LED[2] .. Blink, Activity */ case MARVELL_PHY_FAMILY_ID(MARVELL_PHY_ID_88E1510): - def_config = MII_88E1510_PHY_LED_DEF; + if (phydev->dev_flags & MARVELL_PHY_LED0_LINK_LED1_ACTIVE) + def_config = MII_88E1510_PHY_LED0_LINK_LED1_ACTIVE; + else + def_config = MII_88E1510_PHY_LED_DEF; break; default: return; diff --git a/include/linux/marvell_phy.h b/include/linux/marvell_phy.h index 73d04743a2bb..af6b11d4d673 100644 --- a/include/linux/marvell_phy.h +++ b/include/linux/marvell_phy.h @@ -34,5 +34,6 @@ /* struct phy_device dev_flags definitions */ #define MARVELL_PHY_M1145_FLAGS_RESISTANCE 0x00000001 #define MARVELL_PHY_M1118_DNS323_LEDS 0x00000002 +#define MARVELL_PHY_LED0_LINK_LED1_ACTIVE 0x00000004 #endif /* _MARVELL_PHY_H */ -- 2.30.2