From a8fe65b8f031c5c0a7414059773eaa962e5243cb Mon Sep 17 00:00:00 2001 From: Jeff Kirsher Date: Thu, 19 May 2011 23:27:55 -0700 Subject: [PATCH] 8139*/atp/r8169/sc92031: Move the Realtek drivers Move the Realtek drivers into drivers/net/ethernet/realtek/ and make the necessary Kconfig and Makefile changes. CC: Realtek linux nic maintainers CC: Francois Romieu CC: Jeff Garzik CC: Donald Becker Signed-off-by: Jeff Kirsher --- MAINTAINERS | 2 +- drivers/net/Kconfig | 106 ---------------- drivers/net/Makefile | 5 - drivers/net/ethernet/Kconfig | 1 + drivers/net/ethernet/Makefile | 1 + drivers/net/{ => ethernet/realtek}/8139cp.c | 0 drivers/net/{ => ethernet/realtek}/8139too.c | 0 drivers/net/ethernet/realtek/Kconfig | 126 +++++++++++++++++++ drivers/net/ethernet/realtek/Makefile | 9 ++ drivers/net/{ => ethernet/realtek}/atp.c | 0 drivers/net/{ => ethernet/realtek}/atp.h | 0 drivers/net/{ => ethernet/realtek}/r8169.c | 0 drivers/net/{ => ethernet/realtek}/sc92031.c | 0 13 files changed, 138 insertions(+), 112 deletions(-) rename drivers/net/{ => ethernet/realtek}/8139cp.c (100%) rename drivers/net/{ => ethernet/realtek}/8139too.c (100%) create mode 100644 drivers/net/ethernet/realtek/Kconfig create mode 100644 drivers/net/ethernet/realtek/Makefile rename drivers/net/{ => ethernet/realtek}/atp.c (100%) rename drivers/net/{ => ethernet/realtek}/atp.h (100%) rename drivers/net/{ => ethernet/realtek}/r8169.c (100%) rename drivers/net/{ => ethernet/realtek}/sc92031.c (100%) diff --git a/MAINTAINERS b/MAINTAINERS index 39607a99f969..88ff9efa9c65 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -156,7 +156,7 @@ M: Realtek linux nic maintainers M: Francois Romieu L: netdev@vger.kernel.org S: Maintained -F: drivers/net/r8169.c +F: drivers/net/ethernet/realtek/r8169.c 8250/16?50 (AND CLONE UARTS) SERIAL DRIVER M: Greg Kroah-Hartman diff --git a/drivers/net/Kconfig b/drivers/net/Kconfig index 8da9f9620680..42408d7dc1c2 100644 --- a/drivers/net/Kconfig +++ b/drivers/net/Kconfig @@ -594,73 +594,6 @@ config FEALNX Say Y here to support the Myson MTD-800 family of PCI-based Ethernet cards. -config 8139CP - tristate "RealTek RTL-8139 C+ PCI Fast Ethernet Adapter support (EXPERIMENTAL)" - depends on NET_PCI && PCI && EXPERIMENTAL - select CRC32 - select MII - help - This is a driver for the Fast Ethernet PCI network cards based on - the RTL8139C+ chips. If you have one of those, say Y and read - the Ethernet-HOWTO, available from - . - - To compile this driver as a module, choose M here: the module - will be called 8139cp. This is recommended. - -config 8139TOO - tristate "RealTek RTL-8129/8130/8139 PCI Fast Ethernet Adapter support" - depends on NET_PCI && PCI - select CRC32 - select MII - ---help--- - This is a driver for the Fast Ethernet PCI network cards based on - the RTL 8129/8130/8139 chips. If you have one of those, say Y and - read the Ethernet-HOWTO . - - To compile this driver as a module, choose M here: the module - will be called 8139too. This is recommended. - -config 8139TOO_PIO - bool "Use PIO instead of MMIO" - default y - depends on 8139TOO - help - This instructs the driver to use programmed I/O ports (PIO) instead - of PCI shared memory (MMIO). This can possibly solve some problems - in case your mainboard has memory consistency issues. If unsure, - say N. - -config 8139TOO_TUNE_TWISTER - bool "Support for uncommon RTL-8139 rev. K (automatic channel equalization)" - depends on 8139TOO - help - This implements a function which might come in handy in case you - are using low quality on long cabling. It is required for RealTek - RTL-8139 revision K boards, and totally unused otherwise. It tries - to match the transceiver to the cable characteristics. This is - experimental since hardly documented by the manufacturer. - If unsure, say Y. - -config 8139TOO_8129 - bool "Support for older RTL-8129/8130 boards" - depends on 8139TOO - help - This enables support for the older and uncommon RTL-8129 and - RTL-8130 chips, which support MII via an external transceiver, - instead of an internal one. Disabling this option will save some - memory by making the code size smaller. If unsure, say Y. - -config 8139_OLD_RX_RESET - bool "Use older RX-reset method" - depends on 8139TOO - help - The 8139too driver was recently updated to contain a more rapid - reset sequence, in the face of severe receive errors. This "new" - RX-reset method should be adequate for all boards. But if you - experience problems, you can enable this option to restore the - old RX-reset behavior. If unsure, say N. - config R6040 tristate "RDC R6040 Fast Ethernet Adapter support" depends on NET_PCI && PCI @@ -776,18 +709,6 @@ config VIA_RHINE_MMIO If unsure, say Y. -config SC92031 - tristate "Silan SC92031 PCI Fast Ethernet Adapter driver (EXPERIMENTAL)" - depends on NET_PCI && PCI && EXPERIMENTAL - select CRC32 - ---help--- - This is a driver for the Fast Ethernet PCI network cards based on - the Silan SC92031 chip (sometimes also called Rsltek 8139D). If you - have one of these, say Y here. - - To compile this driver as a module, choose M here: the module - will be called sc92031. This is recommended. - config CPMAC tristate "TI AR7 CPMAC Ethernet support (EXPERIMENTAL)" depends on NET_ETHERNET && EXPERIMENTAL && AR7 @@ -819,21 +740,6 @@ config NET_POCKET the questions about this class of network devices. If you say Y, you will be asked for your specific device in the following questions. -config ATP - tristate "AT-LAN-TEC/RealTek pocket adapter support" - depends on NET_POCKET && PARPORT && X86 - select CRC32 - ---help--- - This is a network (Ethernet) device which attaches to your parallel - port. Read as well as the Ethernet-HOWTO, - available from , if you - want to use this. If you intend to use this driver, you should have - said N to the "Parallel printer support", because the two drivers - don't like each other. - - To compile this driver as a module, choose M here: the module - will be called atp. - config DE600 tristate "D-Link DE600 pocket adapter support" depends on NET_POCKET && PARPORT @@ -1006,18 +912,6 @@ config YELLOWFIN To compile this driver as a module, choose M here: the module will be called yellowfin. This is recommended. -config R8169 - tristate "Realtek 8169 gigabit ethernet support" - depends on PCI - select FW_LOADER - select CRC32 - select MII - ---help--- - Say Y here if you have a Realtek 8169 PCI Gigabit Ethernet adapter. - - To compile this driver as a module, choose M here: the module - will be called r8169. This is recommended. - config SIS190 tristate "SiS190/SiS191 gigabit ethernet support" depends on PCI diff --git a/drivers/net/Makefile b/drivers/net/Makefile index 0b341dc04c13..d142fc5ef68c 100644 --- a/drivers/net/Makefile +++ b/drivers/net/Makefile @@ -112,12 +112,8 @@ obj-$(CONFIG_DEFXX) += defxx.o obj-$(CONFIG_SGISEEQ) += sgiseeq.o obj-$(CONFIG_SGI_O2MACE_ETH) += meth.o obj-$(CONFIG_AT1700) += at1700.o -obj-$(CONFIG_8139CP) += 8139cp.o -obj-$(CONFIG_8139TOO) += 8139too.o obj-$(CONFIG_CPMAC) += cpmac.o obj-$(CONFIG_EWRK3) += ewrk3.o -obj-$(CONFIG_ATP) += atp.o -obj-$(CONFIG_SC92031) += sc92031.o obj-$(CONFIG_ETH16I) += eth16i.o obj-$(CONFIG_EQUALIZER) += eql.o @@ -128,7 +124,6 @@ obj-$(CONFIG_TUN) += tun.o obj-$(CONFIG_VETH) += veth.o obj-$(CONFIG_NET_NETX) += netx-eth.o obj-$(CONFIG_DL2K) += dl2k.o -obj-$(CONFIG_R8169) += r8169.o obj-$(CONFIG_PXA168_ETH) += pxa168_eth.o obj-$(CONFIG_BFIN_MAC) += bfin_mac.o obj-$(CONFIG_DM9000) += dm9000.o diff --git a/drivers/net/ethernet/Kconfig b/drivers/net/ethernet/Kconfig index 110071ec4ce6..fecac79b009b 100644 --- a/drivers/net/ethernet/Kconfig +++ b/drivers/net/ethernet/Kconfig @@ -32,6 +32,7 @@ source "drivers/net/ethernet/8390/Kconfig" source "drivers/net/ethernet/pasemi/Kconfig" source "drivers/net/ethernet/qlogic/Kconfig" source "drivers/net/ethernet/racal/Kconfig" +source "drivers/net/ethernet/realtek/Kconfig" source "drivers/net/ethernet/sfc/Kconfig" source "drivers/net/ethernet/smsc/Kconfig" source "drivers/net/ethernet/stmicro/Kconfig" diff --git a/drivers/net/ethernet/Makefile b/drivers/net/ethernet/Makefile index 4a6edf7141d2..0092c30db18f 100644 --- a/drivers/net/ethernet/Makefile +++ b/drivers/net/ethernet/Makefile @@ -23,6 +23,7 @@ obj-$(CONFIG_NET_VENDOR_NATSEMI) += natsemi/ obj-$(CONFIG_NET_VENDOR_PASEMI) += pasemi/ obj-$(CONFIG_NET_VENDOR_QLOGIC) += qlogic/ obj-$(CONFIG_NET_VENDOR_RACAL) += racal/ +obj-$(CONFIG_NET_VENDOR_REALTEK) += realtek/ obj-$(CONFIG_SFC) += sfc/ obj-$(CONFIG_NET_VENDOR_SMSC) += smsc/ obj-$(CONFIG_NET_VENDOR_STMICRO) += stmicro/ diff --git a/drivers/net/8139cp.c b/drivers/net/ethernet/realtek/8139cp.c similarity index 100% rename from drivers/net/8139cp.c rename to drivers/net/ethernet/realtek/8139cp.c diff --git a/drivers/net/8139too.c b/drivers/net/ethernet/realtek/8139too.c similarity index 100% rename from drivers/net/8139too.c rename to drivers/net/ethernet/realtek/8139too.c diff --git a/drivers/net/ethernet/realtek/Kconfig b/drivers/net/ethernet/realtek/Kconfig new file mode 100644 index 000000000000..a5f67a091c4d --- /dev/null +++ b/drivers/net/ethernet/realtek/Kconfig @@ -0,0 +1,126 @@ +# +# Realtek device configuration +# + +config NET_VENDOR_REALTEK + bool "Realtek devices" + depends on PCI || (PARPORT && X86) + ---help--- + If you have a network (Ethernet) card belonging to this class, say Y + and read the Ethernet-HOWTO, available from + . + + Note that the answer to this question doesn't directly affect the + kernel: saying N will just cause the configurator to skip all + the questions about Realtek devices. If you say Y, you will be asked for + your specific card in the following questions. + +if NET_VENDOR_REALTEK + +config ATP + tristate "AT-LAN-TEC/RealTek pocket adapter support" + depends on PARPORT && X86 + select CRC32 + ---help--- + This is a network (Ethernet) device which attaches to your parallel + port. Read as well as the Ethernet-HOWTO, + available from , if you + want to use this. If you intend to use this driver, you should have + said N to the "Parallel printer support", because the two drivers + don't like each other. + + To compile this driver as a module, choose M here: the module + will be called atp. + +config 8139CP + tristate "RealTek RTL-8139 C+ PCI Fast Ethernet Adapter support (EXPERIMENTAL)" + depends on PCI && EXPERIMENTAL + select CRC32 + select MII + ---help--- + This is a driver for the Fast Ethernet PCI network cards based on + the RTL8139C+ chips. If you have one of those, say Y and read + the Ethernet-HOWTO, available from + . + + To compile this driver as a module, choose M here: the module + will be called 8139cp. This is recommended. + +config 8139TOO + tristate "RealTek RTL-8129/8130/8139 PCI Fast Ethernet Adapter support" + depends on PCI + select CRC32 + select MII + ---help--- + This is a driver for the Fast Ethernet PCI network cards based on + the RTL 8129/8130/8139 chips. If you have one of those, say Y and + read the Ethernet-HOWTO . + + To compile this driver as a module, choose M here: the module + will be called 8139too. This is recommended. + +config 8139TOO_PIO + bool "Use PIO instead of MMIO" + default y + depends on 8139TOO + ---help--- + This instructs the driver to use programmed I/O ports (PIO) instead + of PCI shared memory (MMIO). This can possibly solve some problems + in case your mainboard has memory consistency issues. If unsure, + say N. + +config 8139TOO_TUNE_TWISTER + bool "Support for uncommon RTL-8139 rev. K (automatic channel equalization)" + depends on 8139TOO + ---help--- + This implements a function which might come in handy in case you + are using low quality on long cabling. It is required for RealTek + RTL-8139 revision K boards, and totally unused otherwise. It tries + to match the transceiver to the cable characteristics. This is + experimental since hardly documented by the manufacturer. + If unsure, say Y. + +config 8139TOO_8129 + bool "Support for older RTL-8129/8130 boards" + depends on 8139TOO + ---help--- + This enables support for the older and uncommon RTL-8129 and + RTL-8130 chips, which support MII via an external transceiver, + instead of an internal one. Disabling this option will save some + memory by making the code size smaller. If unsure, say Y. + +config 8139_OLD_RX_RESET + bool "Use older RX-reset method" + depends on 8139TOO + ---help--- + The 8139too driver was recently updated to contain a more rapid + reset sequence, in the face of severe receive errors. This "new" + RX-reset method should be adequate for all boards. But if you + experience problems, you can enable this option to restore the + old RX-reset behavior. If unsure, say N. + +config R8169 + tristate "Realtek 8169 gigabit ethernet support" + depends on PCI + select FW_LOADER + select CRC32 + select MII + ---help--- + Say Y here if you have a Realtek 8169 PCI Gigabit Ethernet adapter. + + To compile this driver as a module, choose M here: the module + will be called r8169. This is recommended. + +config SC92031 + tristate "Silan SC92031 PCI Fast Ethernet Adapter driver (EXPERIMENTAL)" + depends on PCI && EXPERIMENTAL + select CRC32 + ---help--- + This is a driver for the Fast Ethernet PCI network cards based on + the Silan SC92031 chip (sometimes also called Rsltek 8139D). If you + have one of these, say Y here. + + To compile this driver as a module, choose M here: the module + will be called sc92031. This is recommended. + +endif # NET_VENDOR_REALTEK diff --git a/drivers/net/ethernet/realtek/Makefile b/drivers/net/ethernet/realtek/Makefile new file mode 100644 index 000000000000..e48cfb6ac42d --- /dev/null +++ b/drivers/net/ethernet/realtek/Makefile @@ -0,0 +1,9 @@ +# +# Makefile for the Realtek network device drivers. +# + +obj-$(CONFIG_8139CP) += 8139cp.o +obj-$(CONFIG_8139TOO) += 8139too.o +obj-$(CONFIG_ATP) += atp.o +obj-$(CONFIG_R8169) += r8169.o +obj-$(CONFIG_SC92031) += sc92031.o diff --git a/drivers/net/atp.c b/drivers/net/ethernet/realtek/atp.c similarity index 100% rename from drivers/net/atp.c rename to drivers/net/ethernet/realtek/atp.c diff --git a/drivers/net/atp.h b/drivers/net/ethernet/realtek/atp.h similarity index 100% rename from drivers/net/atp.h rename to drivers/net/ethernet/realtek/atp.h diff --git a/drivers/net/r8169.c b/drivers/net/ethernet/realtek/r8169.c similarity index 100% rename from drivers/net/r8169.c rename to drivers/net/ethernet/realtek/r8169.c diff --git a/drivers/net/sc92031.c b/drivers/net/ethernet/realtek/sc92031.c similarity index 100% rename from drivers/net/sc92031.c rename to drivers/net/ethernet/realtek/sc92031.c -- 2.30.2