From a89e7bcb18081c611eb6cf50edd440fa4983a71a Mon Sep 17 00:00:00 2001 From: Loic Poulain Date: Tue, 4 Dec 2018 13:25:32 +0100 Subject: [PATCH] mmc: sdhci-msm: Disable CDR function on TX The Clock Data Recovery (CDR) circuit allows to automatically adjust the RX sampling-point/phase for high frequency cards (SDR104, HS200...). CDR is automatically enabled during DLL configuration. However, according to the APQ8016 reference manual, this function must be disabled during TX and tuning phase in order to prevent any interferences during tuning challenges and unexpected phase alteration during TX transfers. This patch enables/disables CDR according to the current transfer mode. This fixes sporadic write transfer issues observed with some SDR104 and HS200 cards. Inspired by sdhci-msm downstream patch: https://chromium-review.googlesource.com/c/chromiumos/third_party/kernel/+/432516/ Reported-by: Leonid Segal Reported-by: Manabu Igusa Signed-off-by: Loic Poulain Acked-by: Adrian Hunter Acked-by: Georgi Djakov Signed-off-by: Ulf Hansson --- drivers/mmc/host/sdhci-msm.c | 44 +++++++++++++++++++++++++++++++++++- 1 file changed, 43 insertions(+), 1 deletion(-) diff --git a/drivers/mmc/host/sdhci-msm.c b/drivers/mmc/host/sdhci-msm.c index 4cac5935669e..5497a71abe07 100644 --- a/drivers/mmc/host/sdhci-msm.c +++ b/drivers/mmc/host/sdhci-msm.c @@ -260,6 +260,8 @@ struct sdhci_msm_host { bool restore_dll_config; const struct sdhci_msm_variant_ops *var_ops; const struct sdhci_msm_offset *offset; + bool use_cdr; + u32 transfer_mode; }; static const struct sdhci_msm_offset *sdhci_priv_msm_offset(struct sdhci_host *host) @@ -1069,6 +1071,27 @@ static int sdhci_msm_restore_sdr_dll_config(struct sdhci_host *host) return ret; } +static void sdhci_msm_set_cdr(struct sdhci_host *host, bool enable) +{ + const struct sdhci_msm_offset *msm_offset = sdhci_priv_msm_offset(host); + u32 config, oldconfig = readl_relaxed(host->ioaddr + + msm_offset->core_dll_config); + + config = oldconfig; + if (enable) { + config |= CORE_CDR_EN; + config &= ~CORE_CDR_EXT_EN; + } else { + config &= ~CORE_CDR_EN; + config |= CORE_CDR_EXT_EN; + } + + if (config != oldconfig) { + writel_relaxed(config, host->ioaddr + + msm_offset->core_dll_config); + } +} + static int sdhci_msm_execute_tuning(struct mmc_host *mmc, u32 opcode) { struct sdhci_host *host = mmc_priv(mmc); @@ -1079,8 +1102,14 @@ static int sdhci_msm_execute_tuning(struct mmc_host *mmc, u32 opcode) struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host); struct sdhci_msm_host *msm_host = sdhci_pltfm_priv(pltfm_host); - if (!sdhci_msm_is_tuning_needed(host)) + if (!sdhci_msm_is_tuning_needed(host)) { + msm_host->use_cdr = false; + sdhci_msm_set_cdr(host, false); return 0; + } + + /* Clock-Data-Recovery used to dynamically adjust RX sampling point */ + msm_host->use_cdr = true; /* * For HS400 tuning in HS200 timing requires: @@ -1562,6 +1591,19 @@ static int __sdhci_msm_check_write(struct sdhci_host *host, u16 val, int reg) case SDHCI_POWER_CONTROL: req_type = !val ? REQ_BUS_OFF : REQ_BUS_ON; break; + case SDHCI_TRANSFER_MODE: + msm_host->transfer_mode = val; + break; + case SDHCI_COMMAND: + if (!msm_host->use_cdr) + break; + if ((msm_host->transfer_mode & SDHCI_TRNS_READ) && + SDHCI_GET_CMD(val) != MMC_SEND_TUNING_BLOCK_HS200 && + SDHCI_GET_CMD(val) != MMC_SEND_TUNING_BLOCK) + sdhci_msm_set_cdr(host, true); + else + sdhci_msm_set_cdr(host, false); + break; } if (req_type) { -- 2.30.2